EKINOPS-Pm1008-MIB
612 objects
MIB for managing Ekinops modules with PM1008 software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.3 | IdentitymodulePm1008 | MIB for managing Ekinops modules with PM1008 software | ||
| 1.3.6.1.4.1.20044.3.2 | Nodepm1008alarms | |||
| 1.3.6.1.4.1.20044.3.2.1 | Nodepm1008AlmOther | |||
| 1.3.6.1.4.1.20044.3.2.1.1 | Nodepm1008AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.3.2.1.1.2 | Nodepm1008AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.3.2.1.1.2.1 | Scalarpm1008AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.3.2.1.1.2.2 | Scalarpm1008AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.3.2.1.1.2.3 | Scalarpm1008AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.3.2.1.1.2.4 | Scalarpm1008AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.3.2.1.1.2.5 | Scalarpm1008AlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.3.2.1.2 | Nodepm1008AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.3.2.1.2.194 | Nodepm1008AlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.3.2.1.2.194.1 | Scalarpm1008AlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.3.2.1.2.194.2 | Scalarpm1008AlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.3.2.1.2.194.3 | Scalarpm1008AlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.3.2.1.2.194.4 | Scalarpm1008AlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.3.2.1.2.194.5 | Scalarpm1008AlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.3.2.1.2.195 | Nodepm1008AlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.3.2.1.2.195.1 | Scalarpm1008AlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.2 | Scalarpm1008AlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.3 | Scalarpm1008AlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.5 | Scalarpm1008AlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.6 | Scalarpm1008AlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.7 | Scalarpm1008AlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.8 | Scalarpm1008AlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.9 | Scalarpm1008AlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.10 | Scalarpm1008AlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.11 | Scalarpm1008AlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.12 | Scalarpm1008AlmClient4InitFail | read-only | current | Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 4 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.13 | Scalarpm1008AlmClient5InitFail | read-only | current | Client5 Init Fail :This OID indicates that Client 5 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 5 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.14 | Scalarpm1008AlmClient6InitFail | read-only | current | Client6 Init Fail :This OID indicates that Client 6 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 6 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.15 | Scalarpm1008AlmClient7InitFail | read-only | current | Client7 Init Fail :This OID indicates that Client 7 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 7 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.2.195.16 | Scalarpm1008AlmClient8InitFail | read-only | current | Client8 Init Fail :This OID indicates that Client 8 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 8 is cor… |
| 1.3.6.1.4.1.20044.3.2.1.3 | Nodepm1008AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.3.2.1.3.0 | Nodepm1008AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.3.2.1.3.0.9 | Scalarpm1008AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.3.2.1.3.0.15 | Scalarpm1008AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.3.2.1.3.0.16 | Scalarpm1008AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.3.2.2 | Nodepm1008AlmClient | |||
| 1.3.6.1.4.1.20044.3.2.2.1 | Nodepm1008AlmClientNurg | |||
| 1.3.6.1.4.1.20044.3.2.2.1.48 | Tablepm1008AlmsfpWarnDdmTable | not-accessible | current | List of pm1008AlmsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1 | Rowpm1008AlmsfpWarnDdmEntry | not-accessible | current | Row definition for the pm1008AlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.1 | Columnpm1008AlmsfpWarnDdmIndex | read-only | current | Index definition for the pm1008AlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.2 | Columnpm1008AlmTxPwLowWngPortn | read-only | current | Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.3 | Columnpm1008AlmTxPwrHighWngPortn | read-only | current | Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.4 | Columnpm1008AlmTxBiasLowWngPortn | read-only | current | Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.5 | Columnpm1008AlmTxBiasHighWngPortn | read-only | current | Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.6 | Columnpm1008AlmVccLowWngPortn | read-only | current | Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.7 | Columnpm1008AlmVccHighWngPortn | read-only | current | Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.8 | Columnpm1008AlmTempLowWngPortn | read-only | current | Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LO… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.9 | Columnpm1008AlmTempHighWngPortn | read-only | current | Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.16 | Columnpm1008AlmRxPwrLowWngPortn | read-only | current | Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_… |
| 1.3.6.1.4.1.20044.3.2.2.1.48.1.17 | Columnpm1008AlmRxPwrHighWngPortn | read-only | current | Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> R… |
| 1.3.6.1.4.1.20044.3.2.2.2 | Nodepm1008AlmClientUrg | |||
| 1.3.6.1.4.1.20044.3.2.2.2.32 | Tablepm1008AlmsfpAlmDdmTable | not-accessible | current | List of pm1008AlmsfpAlmDdm Article |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1 | Rowpm1008AlmsfpAlmDdmEntry | not-accessible | current | Row definition for the pm1008AlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.1 | Columnpm1008AlmsfpAlmDdmIndex | read-only | current | Index definition for the pm1008AlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.2 | Columnpm1008AlmTxPwrLowAlaPortn | read-only | current | Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_A… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.3 | Columnpm1008AlmTxPwrHighAlaPortn | read-only | current | Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIG… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.4 | Columnpm1008AlmTxBiasLowAlaPortn | read-only | current | Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LO… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.5 | Columnpm1008AlmTxBiasHighAlaPortn | read-only | current | Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.6 | Columnpm1008AlmVccLowAlaPortn | read-only | current | Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.7 | Columnpm1008AlmVccHighAlaPortn | read-only | current | Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HI… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.8 | Columnpm1008AlmTempLowAlaPortn | read-only | current | Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <P… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.9 | Columnpm1008AlmTempHighAlaPortn | read-only | current | Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.16 | Columnpm1008AlmRxPwrLowAlaPortn | read-only | current | Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_AL… |
| 1.3.6.1.4.1.20044.3.2.2.2.32.1.17 | Columnpm1008AlmRxPwrHighAlaPortn | read-only | current | Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH… |
| 1.3.6.1.4.1.20044.3.2.2.3 | Nodepm1008AlmClientCrit | |||
| 1.3.6.1.4.1.20044.3.2.2.3.8 | Tablepm1008AlmsynthAlmPortTable | not-accessible | current | List of pm1008AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1 | Rowpm1008AlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm1008AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.1 | Columnpm1008AlmsynthAlmPortIndex | read-only | current | Index definition for the pm1008AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.2 | Columnpm1008AlmSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. … |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.3 | Columnpm1008AlmDdmAbsentPortn | read-only | current | DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if … |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.5 | Columnpm1008AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16)… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.6 | Columnpm1008AlmDwLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OF… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.7 | Columnpm1008AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.8 | Columnpm1008AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.9 | Columnpm1008AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indictaes if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.10 | Columnpm1008AlmSfpDdmWarningPortn | read-only | current | Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.11 | Columnpm1008AlmSfpDdmAlmPortn | read-only | current | Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.13 | Columnpm1008AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12)… |
| 1.3.6.1.4.1.20044.3.2.2.3.8.1.17 | Columnpm1008AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.3.2.2.3.16 | Tablepm1008AlmaccessioAlmTable | not-accessible | current | List of pm1008AlmaccessioAlm Article |
| 1.3.6.1.4.1.20044.3.2.2.3.16.1 | Rowpm1008AlmaccessioAlmEntry | not-accessible | current | Row definition for the pm1008AlmaccessioAlm table |
| 1.3.6.1.4.1.20044.3.2.2.3.16.1.1 | Columnpm1008AlmaccessioAlmIndex | read-only | current | Index definition for the pm1008AlmaccessioAlm table |
| 1.3.6.1.4.1.20044.3.2.2.3.16.1.2 | Columnpm1008AlmDwLasFailPortn | read-only | current | Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.3.2.2.3.16.1.5 | Columnpm1008AlmUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.3.2.2.3.72 | Tablepm1008AlmmapperDeAlmTable | not-accessible | current | List of pm1008AlmmapperDeAlm Article |
| 1.3.6.1.4.1.20044.3.2.2.3.72.1 | Rowpm1008AlmmapperDeAlmEntry | not-accessible | current | Row definition for the pm1008AlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.3.2.2.3.72.1.1 | Columnpm1008AlmmapperDeAlmIndex | read-only | current | Index definition for the pm1008AlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.3.2.2.3.72.1.2 | Columnpm1008AlmUpAccOosPortn | read-only | current | Client Loss Of 10b/8b Synchro :This OID indicates the upstream client input port has lost synchronization on its 10B/8B decoder <Help> This alarms indicates if… |
| 1.3.6.1.4.1.20044.3.2.2.3.72.1.11 | Columnpm1008AlmUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.3.2.2.3.72.1.12 | Columnpm1008AlmDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.3.2.2.3.72.1.15 | Columnpm1008AlmDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.3.2.3 | Nodepm1008AlmLine | |||
| 1.3.6.1.4.1.20044.3.2.3.1 | Nodepm1008AlmLineNurg | |||
| 1.3.6.1.4.1.20044.3.2.3.1.209 | Tablepm1008AlmlineXfp1WarningsTable | not-accessible | current | List of pm1008AlmlineXfp1Warnings Article |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1 | Rowpm1008AlmlineXfp1WarningsEntry | not-accessible | current | Row definition for the pm1008AlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.1 | Columnpm1008AlmlineXfp1WarningsIndex | read-only | current | Index definition for the pm1008AlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.2 | Columnpm1008AlmTxPowerLowWarningPortn | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.3 | Columnpm1008AlmTxPowerHighWarningPortn | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.4 | Columnpm1008AlmTxBiasLowWarningPortn | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.5 | Columnpm1008AlmTxBiasHighWarningPortn | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.8 | Columnpm1008AlmTempLowWarningPortn | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> T… |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.9 | Columnpm1008AlmTempHighWarningPortn | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEM… |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.16 | Columnpm1008AlmRxPowerLowWarningPortn | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.3.2.3.1.209.1.17 | Columnpm1008AlmRxPowerHighWarningPortn | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.3.2.3.1.225 | Tablepm1008AlmlineOtx1TlhWarningsTable | not-accessible | current | List of pm1008AlmlineOtx1TlhWarnings Article |
| 1.3.6.1.4.1.20044.3.2.3.1.225.1 | Rowpm1008AlmlineOtx1TlhWarningsEntry | not-accessible | current | Row definition for the pm1008AlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.3.2.3.1.225.1.1 | Columnpm1008AlmlineOtx1TlhWarningsIndex | read-only | current | Index definition for the pm1008AlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.3.2.3.1.225.1.6 | Columnpm1008AlmLineModulatorAgingHighWarningPortn | read-only | current | Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODUL… |
| 1.3.6.1.4.1.20044.3.2.3.1.225.1.7 | Columnpm1008AlmLineAgingHighWarningPortn | read-only | current | Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.3.2.3.1.225.1.13 | Columnpm1008AlmLineFreqDevHighWarningPortn | read-only | current | Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_F… |
| 1.3.6.1.4.1.20044.3.2.3.1.225.1.15 | Columnpm1008AlmLineLaserTempHighWarningPortn | read-only | current | Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_T… |
| 1.3.6.1.4.1.20044.3.2.3.2 | Nodepm1008AlmLineUrg | |||
| 1.3.6.1.4.1.20044.3.2.3.2.129 | Tablepm1008AlmdfrmBerTable | not-accessible | current | List of pm1008AlmdfrmBer Article |
| 1.3.6.1.4.1.20044.3.2.3.2.129.1 | Rowpm1008AlmdfrmBerEntry | not-accessible | current | Row definition for the pm1008AlmdfrmBer table |
| 1.3.6.1.4.1.20044.3.2.3.2.129.1.1 | Columnpm1008AlmdfrmBerIndex | read-only | current | Index definition for the pm1008AlmdfrmBer table |
| 1.3.6.1.4.1.20044.3.2.3.2.129.1.2 | Columnpm1008AlmLineSignalDegradePortn | read-only | current | Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA… |
| 1.3.6.1.4.1.20044.3.2.3.2.129.1.3 | Columnpm1008AlmLineSignalFailPortn | read-only | current | Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F… |
| 1.3.6.1.4.1.20044.3.2.3.2.129.1.6 | Columnpm1008AlmLineDegradePortn | read-only | current | Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio… |
| 1.3.6.1.4.1.20044.3.2.3.2.208 | Tablepm1008AlmlineXfp1AlarmTable | not-accessible | current | List of pm1008AlmlineXfp1Alarm Article |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1 | Rowpm1008AlmlineXfp1AlarmEntry | not-accessible | current | Row definition for the pm1008AlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.1 | Columnpm1008AlmlineXfp1AlarmIndex | read-only | current | Index definition for the pm1008AlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.2 | Columnpm1008AlmTxPowerLowAlarmPortn | read-only | current | Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.3 | Columnpm1008AlmTxPowerHighAlarmPortn | read-only | current | Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.4 | Columnpm1008AlmTxBiasLowAlarmPortn | read-only | current | Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Co… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.5 | Columnpm1008AlmTxBiasHighAlarmPortn | read-only | current | Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Cond… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.8 | Columnpm1008AlmTempLowAlarmPortn | read-only | current | Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_AL… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.9 | Columnpm1008AlmTempHighAlarmPortn | read-only | current | Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALA… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.16 | Columnpm1008AlmRxPowerLowAlarmPortn | read-only | current | Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER… |
| 1.3.6.1.4.1.20044.3.2.3.2.208.1.17 | Columnpm1008AlmRxPowerHighAlarmPortn | read-only | current | Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POW… |
| 1.3.6.1.4.1.20044.3.2.3.2.212 | Tablepm1008AlmlineXfp1SupplyAlarmTable | not-accessible | current | List of pm1008AlmlineXfp1SupplyAlarm Article |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1 | Rowpm1008AlmlineXfp1SupplyAlarmEntry | not-accessible | current | Row definition for the pm1008AlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.1 | Columnpm1008AlmlineXfp1SupplyAlarmIndex | read-only | current | Index definition for the pm1008AlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.2 | Columnpm1008AlmVee5LowAlarmPortn | read-only | current | VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.3 | Columnpm1008AlmVee5HighAlarmPortn | read-only | current | VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.4 | Columnpm1008AlmVcc2LowAlarmPortn | read-only | current | VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.5 | Columnpm1008AlmVcc2HighAlarmPortn | read-only | current | VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.6 | Columnpm1008AlmVcc3LowAlarmPortn | read-only | current | VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.7 | Columnpm1008AlmVcc3HighAlarmPortn | read-only | current | VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.8 | Columnpm1008AlmVcc5LowAlarmPortn | read-only | current | VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.9 | Columnpm1008AlmVcc5HighAlarmPortn | read-only | current | VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.10 | Columnpm1008AlmVee5LowWarningPortn | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.11 | Columnpm1008AlmVee5HighWarningPortn | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.12 | Columnpm1008AlmVcc2LowWarningPortn | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.13 | Columnpm1008AlmVcc2HighWarningPortn | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.14 | Columnpm1008AlmVcc3LowWarningPortn | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.15 | Columnpm1008AlmVcc3HighWarningPortn | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.16 | Columnpm1008AlmVcc5LowWarningPortn | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.3.2.3.2.212.1.17 | Columnpm1008AlmVcc5HighWarningPortn | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.3.2.3.2.224 | Tablepm1008AlmlineOtx1TlhAlarmsTable | not-accessible | current | List of pm1008AlmlineOtx1TlhAlarms Article |
| 1.3.6.1.4.1.20044.3.2.3.2.224.1 | Rowpm1008AlmlineOtx1TlhAlarmsEntry | not-accessible | current | Row definition for the pm1008AlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.3.2.3.2.224.1.1 | Columnpm1008AlmlineOtx1TlhAlarmsIndex | read-only | current | Index definition for the pm1008AlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.3.2.3.2.224.1.6 | Columnpm1008AlmLineModulatorAgingHighAlaPortn | read-only | current | Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR… |
| 1.3.6.1.4.1.20044.3.2.3.2.224.1.7 | Columnpm1008AlmLineAgingHighAlaPortn | read-only | current | Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Pro… |
| 1.3.6.1.4.1.20044.3.2.3.2.224.1.13 | Columnpm1008AlmLineFreqDevHighAlaPortn | read-only | current | Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_… |
| 1.3.6.1.4.1.20044.3.2.3.2.224.1.15 | Columnpm1008AlmLineLaserTempHighAlaPortn | read-only | current | Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_… |
| 1.3.6.1.4.1.20044.3.2.3.3 | Nodepm1008AlmLineCrit | |||
| 1.3.6.1.4.1.20044.3.2.3.3.7 | Tablepm1008AlmsynthAlmLineTable | not-accessible | current | List of pm1008AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1 | Rowpm1008AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm1008AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.1 | Columnpm1008AlmsynthAlmLineIndex | read-only | current | Index definition for the pm1008AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.2 | Columnpm1008AlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.3 | Columnpm1008AlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver … |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.5 | Columnpm1008AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.6 | Columnpm1008AlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or … |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.7 | Columnpm1008AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.9 | Columnpm1008AlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.10 | Columnpm1008AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warni… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.11 | Columnpm1008AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm ha… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.13 | Columnpm1008AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.3.2.3.3.7.1.17 | Columnpm1008AlmLineActivePortn | read-only | current | Line Active :This bit indicates the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIV… |
| 1.3.6.1.4.1.20044.3.2.3.3.128 | Tablepm1008AlmdfrmAlmTable | not-accessible | current | List of pm1008AlmdfrmAlm Article |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1 | Rowpm1008AlmdfrmAlmEntry | not-accessible | current | Row definition for the pm1008AlmdfrmAlm table |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.1 | Columnpm1008AlmdfrmAlmIndex | read-only | current | Index definition for the pm1008AlmdfrmAlm table |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.2 | Columnpm1008AlmDwAisDetPortn | read-only | current | MS-AIS/L-AIS Detected On Line Input :This OID indicates that an MS-AIS has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.3 | Columnpm1008AlmDwRdiDetPortn | read-only | current | MS-RDI/L-RDI Detected On Line Input :This OID indicates that an MS-RDI has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.4 | Columnpm1008AlmDwOofPortn | read-only | current | SONET/SDH Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.5 | Columnpm1008AlmDwLofPortn | read-only | current | SONET/SDH Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if … |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.15 | Columnpm1008AlmDccLoopbackPortn | read-only | current | DCC Traffic Loopback :This OID indicates a loopback condition detected on DCC over the network <Help> This alarms indicates if a DCC loopback is detected. <Con… |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.16 | Columnpm1008AlmRxDccBroadStormPortn | read-only | current | Rx DCC Ethernet Broadcast Storm :This OID indicates that a storm of Broadcast/Multicast packets have been detected on the DCC channel on the Receive Line side … |
| 1.3.6.1.4.1.20044.3.2.3.3.128.1.17 | Columnpm1008AlmTxDccBroadStormPortn | read-only | current | Tx DCC Ethernet Broadcast Storm :This OID indicates that a storm of Broadcast/Multicast packets have been detected on the DCC channel on the Transmit Line side… |
| 1.3.6.1.4.1.20044.3.2.3.3.133 | Tablepm1008AlmlineSyncAlarmsTable | not-accessible | current | List of pm1008AlmlineSyncAlarms Article |
| 1.3.6.1.4.1.20044.3.2.3.3.133.1 | Rowpm1008AlmlineSyncAlarmsEntry | not-accessible | current | Row definition for the pm1008AlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.3.2.3.3.133.1.1 | Columnpm1008AlmlineSyncAlarmsIndex | read-only | current | Index definition for the pm1008AlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.3.2.3.3.133.1.13 | Columnpm1008AlmDwLockerrPortn | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFail… |
| 1.3.6.1.4.1.20044.3.2.3.3.133.1.14 | Columnpm1008AlmUpLockerrPortn | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receive… |
| 1.3.6.1.4.1.20044.3.2.3.3.133.1.17 | Columnpm1008AlmDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.3.2.3.3.211 | Tablepm1008AlmlineXfp1AlarmsTable | not-accessible | current | List of pm1008AlmlineXfp1Alarms Article |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1 | Rowpm1008AlmlineXfp1AlarmsEntry | not-accessible | current | Row definition for the pm1008AlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.1 | Columnpm1008AlmlineXfp1AlarmsIndex | read-only | current | Index definition for the pm1008AlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.3 | Columnpm1008AlmModNrPortn | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.4 | Columnpm1008AlmRxCdrNotLockedPortn | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.6 | Columnpm1008AlmRxNrPortn | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.7 | Columnpm1008AlmTxCdrNotLockedPortn | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.8 | Columnpm1008AlmTxFaultPortn | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.9 | Columnpm1008AlmTxNrPortn | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.15 | Columnpm1008AlmWavelengthUnlockedPortn | read-only | current | Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wa… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.16 | Columnpm1008AlmTecFaultPortn | read-only | current | Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail con… |
| 1.3.6.1.4.1.20044.3.2.3.3.211.1.17 | Columnpm1008AlmApdSupplyFaultPortn | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.3.3 | Nodepm1008measures | |||
| 1.3.6.1.4.1.20044.3.3.1 | Nodepm1008MesrOther | |||
| 1.3.6.1.4.1.20044.3.3.1.0 | Scalarpm1008Mesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.3.3.1.1 | Scalarpm1008Mesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.3.3.2 | Nodepm1008MesrClient | |||
| 1.3.6.1.4.1.20044.3.3.2.16 | Tablepm1008MesrtempMeasTable | not-accessible | current | List of pm1008MesrtempMeas Article |
| 1.3.6.1.4.1.20044.3.3.2.16.1 | Rowpm1008MesrtempMeasEntry | not-accessible | current | Row definition for the pm1008MesrtempMeas table |
| 1.3.6.1.4.1.20044.3.3.2.16.1.1 | Columnpm1008MesrtempMeasIndex | read-only | current | Index definition for the pm1008MesrtempMeas table |
| 1.3.6.1.4.1.20044.3.3.2.16.1.2 | Columnpm1008MesrtempMeasPortn | read-only | current | Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/25… |
| 1.3.6.1.4.1.20044.3.3.2.24 | Tablepm1008MesrvoltMeasTable | not-accessible | current | List of pm1008MesrvoltMeas Article |
| 1.3.6.1.4.1.20044.3.3.2.24.1 | Rowpm1008MesrvoltMeasEntry | not-accessible | current | Row definition for the pm1008MesrvoltMeas table |
| 1.3.6.1.4.1.20044.3.3.2.24.1.1 | Columnpm1008MesrvoltMeasIndex | read-only | current | Index definition for the pm1008MesrvoltMeas table |
| 1.3.6.1.4.1.20044.3.3.2.24.1.2 | Columnpm1008MesrvoltMeasPortn | read-only | current | Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/100… |
| 1.3.6.1.4.1.20044.3.3.2.32 | Tablepm1008MesrbiasMeasTable | not-accessible | current | List of pm1008MesrbiasMeas Article |
| 1.3.6.1.4.1.20044.3.3.2.32.1 | Rowpm1008MesrbiasMeasEntry | not-accessible | current | Row definition for the pm1008MesrbiasMeas table |
| 1.3.6.1.4.1.20044.3.3.2.32.1.1 | Columnpm1008MesrbiasMeasIndex | read-only | current | Index definition for the pm1008MesrbiasMeas table |
| 1.3.6.1.4.1.20044.3.3.2.32.1.2 | Columnpm1008MesrbiasMeasPortn | read-only | current | Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.3.3.2.40 | Tablepm1008MesrtxpwrMeasTable | not-accessible | current | List of pm1008MesrtxpwrMeas Article |
| 1.3.6.1.4.1.20044.3.3.2.40.1 | Rowpm1008MesrtxpwrMeasEntry | not-accessible | current | Row definition for the pm1008MesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.3.3.2.40.1.1 | Columnpm1008MesrtxpwrMeasIndex | read-only | current | Index definition for the pm1008MesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.3.3.2.40.1.2 | Columnpm1008MesrtxpwrMeasPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV… |
| 1.3.6.1.4.1.20044.3.3.2.48 | Tablepm1008MesrrxpwrMeasTable | not-accessible | current | List of pm1008MesrrxpwrMeas Article |
| 1.3.6.1.4.1.20044.3.3.2.48.1 | Rowpm1008MesrrxpwrMeasEntry | not-accessible | current | Row definition for the pm1008MesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.3.3.2.48.1.1 | Columnpm1008MesrrxpwrMeasIndex | read-only | current | Index definition for the pm1008MesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.3.3.2.48.1.2 | Columnpm1008MesrrxpwrMeasPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-4… |
| 1.3.6.1.4.1.20044.3.3.3 | Nodepm1008MesrLine | |||
| 1.3.6.1.4.1.20044.3.3.3.208 | Tablepm1008Mesrxfp1LxModTempMeasTable | not-accessible | current | List of pm1008Mesrxfp1LxModTempMeas Article |
| 1.3.6.1.4.1.20044.3.3.3.208.1 | Rowpm1008Mesrxfp1LxModTempMeasEntry | not-accessible | current | Row definition for the pm1008Mesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.3.3.3.208.1.1 | Columnpm1008Mesrxfp1LxModTempMeasIndex | read-only | current | Index definition for the pm1008Mesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.3.3.3.208.1.2 | Columnpm1008Mesrxfp1LxModTempMeasPortn | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Tempera… |
| 1.3.6.1.4.1.20044.3.3.3.209 | Tablepm1008Mesrxfp1ReservedTable | not-accessible | deprecated | List of pm1008Mesrxfp1Reserved Article |
| 1.3.6.1.4.1.20044.3.3.3.209.1 | Rowpm1008Mesrxfp1ReservedEntry | not-accessible | deprecated | Row definition for the pm1008Mesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.3.3.3.209.1.1 | Columnpm1008Mesrxfp1ReservedIndex | read-only | deprecated | Index definition for the pm1008Mesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.3.3.3.209.1.2 | Columnpm1008Mesrxfp1ReservedPortn | read-only | deprecated | Not Used :Reserved |
| 1.3.6.1.4.1.20044.3.3.3.210 | Tablepm1008Mesrxfp1LoBiasCurrentMeasTable | not-accessible | current | List of pm1008Mesrxfp1LoBiasCurrentMeas Article |
| 1.3.6.1.4.1.20044.3.3.3.210.1 | Rowpm1008Mesrxfp1LoBiasCurrentMeasEntry | not-accessible | current | Row definition for the pm1008Mesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.3.3.3.210.1.1 | Columnpm1008Mesrxfp1LoBiasCurrentMeasIndex | read-only | current | Index definition for the pm1008Mesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.3.3.3.210.1.2 | Columnpm1008Mesrxfp1LoBiasCurrentMeasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.3.3.3.211 | Tablepm1008Mesrxfp1LoTxPowerMeasTable | not-accessible | current | List of pm1008Mesrxfp1LoTxPowerMeas Article |
| 1.3.6.1.4.1.20044.3.3.3.211.1 | Rowpm1008Mesrxfp1LoTxPowerMeasEntry | not-accessible | current | Row definition for the pm1008Mesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.3.3.3.211.1.1 | Columnpm1008Mesrxfp1LoTxPowerMeasIndex | read-only | current | Index definition for the pm1008Mesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.3.3.3.211.1.2 | Columnpm1008Mesrxfp1LoTxPowerMeasPortn | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.3.3.3.212 | Tablepm1008Mesrxfp1LiRxPowerMeasTable | not-accessible | current | List of pm1008Mesrxfp1LiRxPowerMeas Article |
| 1.3.6.1.4.1.20044.3.3.3.212.1 | Rowpm1008Mesrxfp1LiRxPowerMeasEntry | not-accessible | current | Row definition for the pm1008Mesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.3.3.3.212.1.1 | Columnpm1008Mesrxfp1LiRxPowerMeasIndex | read-only | current | Index definition for the pm1008Mesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.3.3.3.212.1.2 | Columnpm1008Mesrxfp1LiRxPowerMeasPortn | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (P… |
| 1.3.6.1.4.1.20044.3.3.3.213 | Tablepm1008Mesrxfp1LxAux1MeasTable | not-accessible | deprecated | List of pm1008Mesrxfp1LxAux1Meas Article |
| 1.3.6.1.4.1.20044.3.3.3.213.1 | Rowpm1008Mesrxfp1LxAux1MeasEntry | not-accessible | deprecated | Row definition for the pm1008Mesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.3.3.3.213.1.1 | Columnpm1008Mesrxfp1LxAux1MeasIndex | read-only | deprecated | Index definition for the pm1008Mesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.3.3.3.213.1.2 | Columnpm1008Mesrxfp1LxAux1MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.3.3.3.214 | Tablepm1008Mesrxfp1LxAux2MeasTable | not-accessible | deprecated | List of pm1008Mesrxfp1LxAux2Meas Article |
| 1.3.6.1.4.1.20044.3.3.3.214.1 | Rowpm1008Mesrxfp1LxAux2MeasEntry | not-accessible | deprecated | Row definition for the pm1008Mesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.3.3.3.214.1.1 | Columnpm1008Mesrxfp1LxAux2MeasIndex | read-only | deprecated | Index definition for the pm1008Mesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.3.3.3.214.1.2 | Columnpm1008Mesrxfp1LxAux2MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.3.3.3.224 | Tablepm1008Mesrotx1AgingTable | not-accessible | current | List of pm1008Mesrotx1Aging Article |
| 1.3.6.1.4.1.20044.3.3.3.224.1 | Rowpm1008Mesrotx1AgingEntry | not-accessible | current | Row definition for the pm1008Mesrotx1Aging table |
| 1.3.6.1.4.1.20044.3.3.3.224.1.1 | Columnpm1008Mesrotx1AgingIndex | read-only | current | Index definition for the pm1008Mesrotx1Aging table |
| 1.3.6.1.4.1.20044.3.3.3.224.1.2 | Columnpm1008Mesrotx1AgingPortn | read-only | current | Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure… |
| 1.3.6.1.4.1.20044.3.3.3.225 | Tablepm1008Mesrotx1LaserTemperatureTable | not-accessible | deprecated | List of pm1008Mesrotx1LaserTemperature Article |
| 1.3.6.1.4.1.20044.3.3.3.225.1 | Rowpm1008Mesrotx1LaserTemperatureEntry | not-accessible | deprecated | Row definition for the pm1008Mesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.3.3.3.225.1.1 | Columnpm1008Mesrotx1LaserTemperatureIndex | read-only | deprecated | Index definition for the pm1008Mesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.3.3.3.225.1.2 | Columnpm1008Mesrotx1LaserTemperaturePortn | read-only | deprecated | Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.3.3.3.226 | Tablepm1008Mesrotx1FreqDeviationTable | not-accessible | current | List of pm1008Mesrotx1FreqDeviation Article |
| 1.3.6.1.4.1.20044.3.3.3.226.1 | Rowpm1008Mesrotx1FreqDeviationEntry | not-accessible | current | Row definition for the pm1008Mesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.3.3.3.226.1.1 | Columnpm1008Mesrotx1FreqDeviationIndex | read-only | current | Index definition for the pm1008Mesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.3.3.3.226.1.2 | Columnpm1008Mesrotx1FreqDeviationPortn | read-only | current | Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (A… |
| 1.3.6.1.4.1.20044.3.3.3.227 | Tablepm1008Mesrotx1LaserWvlengthTable | not-accessible | current | List of pm1008Mesrotx1LaserWvlength Article |
| 1.3.6.1.4.1.20044.3.3.3.227.1 | Rowpm1008Mesrotx1LaserWvlengthEntry | not-accessible | current | Row definition for the pm1008Mesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.3.3.3.227.1.1 | Columnpm1008Mesrotx1LaserWvlengthIndex | read-only | current | Index definition for the pm1008Mesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.3.3.3.227.1.2 | Columnpm1008Mesrotx1LaserWvlengthPortn | read-only | current | Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=29979245… |
| 1.3.6.1.4.1.20044.3.4 | Nodepm1008counters | |||
| 1.3.6.1.4.1.20044.3.4.1 | Nodepm1008CntOther | |||
| 1.3.6.1.4.1.20044.3.4.2 | Nodepm1008CntClient | |||
| 1.3.6.1.4.1.20044.3.4.2.16 | Tablepm1008CntupRaRemCntTable | not-accessible | current | List of pm1008CntupRaRemCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.16.1 | Rowpm1008CntupRaRemCntEntry | not-accessible | current | Row definition for the pm1008CntupRaRemCnt table |
| 1.3.6.1.4.1.20044.3.4.2.16.1.1 | Columnpm1008CntupRaRemCntIndex | read-only | current | Index definition for the pm1008CntupRaRemCnt table |
| 1.3.6.1.4.1.20044.3.4.2.16.1.2 | Columnpm1008CntupRaRemCntValuePortn | read-only | current | Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
| 1.3.6.1.4.1.20044.3.4.2.16.1.3 | Columnpm1008CntupRaRemCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.16.1.4 | Columnpm1008CntupRaRemCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.2.24 | Tablepm1008CntupRaInsCntTable | not-accessible | current | List of pm1008CntupRaInsCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.24.1 | Rowpm1008CntupRaInsCntEntry | not-accessible | current | Row definition for the pm1008CntupRaInsCnt table |
| 1.3.6.1.4.1.20044.3.4.2.24.1.1 | Columnpm1008CntupRaInsCntIndex | read-only | current | Index definition for the pm1008CntupRaInsCnt table |
| 1.3.6.1.4.1.20044.3.4.2.24.1.2 | Columnpm1008CntupRaInsCntValuePortn | read-only | current | Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
| 1.3.6.1.4.1.20044.3.4.2.24.1.3 | Columnpm1008CntupRaInsCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.24.1.4 | Columnpm1008CntupRaInsCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.2.32 | Tablepm1008CntupRdErrCntTable | not-accessible | current | List of pm1008CntupRdErrCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.32.1 | Rowpm1008CntupRdErrCntEntry | not-accessible | current | Row definition for the pm1008CntupRdErrCnt table |
| 1.3.6.1.4.1.20044.3.4.2.32.1.1 | Columnpm1008CntupRdErrCntIndex | read-only | current | Index definition for the pm1008CntupRdErrCnt table |
| 1.3.6.1.4.1.20044.3.4.2.32.1.2 | Columnpm1008CntupRdErrCntValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.3.4.2.32.1.3 | Columnpm1008CntupRdErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.32.1.4 | Columnpm1008CntupRdErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.2.40 | Tablepm1008CntupTimCntTable | not-accessible | current | List of pm1008CntupTimCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.40.1 | Rowpm1008CntupTimCntEntry | not-accessible | current | Row definition for the pm1008CntupTimCnt table |
| 1.3.6.1.4.1.20044.3.4.2.40.1.1 | Columnpm1008CntupTimCntIndex | read-only | current | Index definition for the pm1008CntupTimCnt table |
| 1.3.6.1.4.1.20044.3.4.2.40.1.2 | Columnpm1008CntupTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.3.4.2.40.1.3 | Columnpm1008CntupTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.40.1.4 | Columnpm1008CntupTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.2.48 | Tablepm1008CntupCvErrCntTable | not-accessible | current | List of pm1008CntupCvErrCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.48.1 | Rowpm1008CntupCvErrCntEntry | not-accessible | current | Row definition for the pm1008CntupCvErrCnt table |
| 1.3.6.1.4.1.20044.3.4.2.48.1.1 | Columnpm1008CntupCvErrCntIndex | read-only | current | Index definition for the pm1008CntupCvErrCnt table |
| 1.3.6.1.4.1.20044.3.4.2.48.1.2 | Columnpm1008CntupCvErrCntValuePortn | read-only | current | Client Coding Violation Counter :This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
| 1.3.6.1.4.1.20044.3.4.2.48.1.3 | Columnpm1008CntupCvErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the coding violation counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.48.1.4 | Columnpm1008CntupCvErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a coding violation counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.2.64 | Tablepm1008CntdwCbipCntTable | not-accessible | current | List of pm1008CntdwCbipCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.64.1 | Rowpm1008CntdwCbipCntEntry | not-accessible | current | Row definition for the pm1008CntdwCbipCnt table |
| 1.3.6.1.4.1.20044.3.4.2.64.1.1 | Columnpm1008CntdwCbipCntIndex | read-only | current | Index definition for the pm1008CntdwCbipCnt table |
| 1.3.6.1.4.1.20044.3.4.2.64.1.2 | Columnpm1008CntdwCbipCntValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.3.4.2.64.1.3 | Columnpm1008CntdwCbipCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.64.1.4 | Columnpm1008CntdwCbipCntOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.2.72 | Tablepm1008CntdwTimCntTable | not-accessible | current | List of pm1008CntdwTimCnt Article |
| 1.3.6.1.4.1.20044.3.4.2.72.1 | Rowpm1008CntdwTimCntEntry | not-accessible | current | Row definition for the pm1008CntdwTimCnt table |
| 1.3.6.1.4.1.20044.3.4.2.72.1.1 | Columnpm1008CntdwTimCntIndex | read-only | current | Index definition for the pm1008CntdwTimCnt table |
| 1.3.6.1.4.1.20044.3.4.2.72.1.2 | Columnpm1008CntdwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.3.4.2.72.1.3 | Columnpm1008CntdwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.2.72.1.4 | Columnpm1008CntdwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.3 | Nodepm1008CntLine | |||
| 1.3.6.1.4.1.20044.3.4.3.152 | Tablepm1008CntdfrmB1ErrCntTable | not-accessible | current | List of pm1008CntdfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.3.4.3.152.1 | Rowpm1008CntdfrmB1ErrCntEntry | not-accessible | current | Row definition for the pm1008CntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.3.4.3.152.1.1 | Columnpm1008CntdfrmB1ErrCntIndex | read-only | current | Index definition for the pm1008CntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.3.4.3.152.1.2 | Columnpm1008CntdfrmB1ErrCntValuePortn | read-only | current | Line Input B1 Errors :This counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 err… |
| 1.3.6.1.4.1.20044.3.4.3.152.1.3 | Columnpm1008CntdfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.3.152.1.4 | Columnpm1008CntdfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.3.153 | Tablepm1008CntdfrmTimCntTable | not-accessible | current | List of pm1008CntdfrmTimCnt Article |
| 1.3.6.1.4.1.20044.3.4.3.153.1 | Rowpm1008CntdfrmTimCntEntry | not-accessible | current | Row definition for the pm1008CntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.3.4.3.153.1.1 | Columnpm1008CntdfrmTimCntIndex | read-only | current | Index definition for the pm1008CntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.3.4.3.153.1.2 | Columnpm1008CntdfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.3.4.3.153.1.3 | Columnpm1008CntdfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.3.4.3.153.1.4 | Columnpm1008CntdfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.3.4.3.154 | Tablepm1008CntdfrmPrimLineErrCntTable | not-accessible | current | List of pm1008CntdfrmPrimLineErrCnt Article |
| 1.3.6.1.4.1.20044.3.4.3.154.1 | Rowpm1008CntdfrmPrimLineErrCntEntry | not-accessible | current | Row definition for the pm1008CntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.3.4.3.154.1.1 | Columnpm1008CntdfrmPrimLineErrCntIndex | read-only | current | Index definition for the pm1008CntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.3.4.3.154.1.2 | Columnpm1008CntdfrmPrimLineErrCntValuePortn | read-only | current | Line Input FEC Corrected Errors :This counter is incremented each time the FEC is correcting an error on the line input stream. <Help> This counter gives the n… |
| 1.3.6.1.4.1.20044.3.4.3.154.1.3 | Columnpm1008CntdfrmPrimLineErrCntErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.3.4.3.154.1.4 | Columnpm1008CntdfrmPrimLineErrCntOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.3.4.259 | Scalarpm1008CntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.3.4.260 | Scalarpm1008CntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.3.6 | Nodepm1008controlsWrite | |||
| 1.3.6.1.4.1.20044.3.6.1 | Nodepm1008CtrlOther | |||
| 1.3.6.1.4.1.20044.3.6.1.1 | Nodepm1008CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.3.6.1.1.1 | Scalarpm1008CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.3.6.1.1.2 | Scalarpm1008CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.3.6.1.1.10 | Scalarpm1008CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.3.6.1.1.14 | Scalarpm1008CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.3.6.1.4 | Nodepm1008Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.3.6.1.4.1 | Scalarpm1008CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.3.6.1.4.2 | Scalarpm1008CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.3.6.1.5 | Nodepm1008CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.3.6.1.5.2 | Scalarpm1008CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.3.6.1.5.3 | Scalarpm1008CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.3.6.1.5.5 | Scalarpm1008CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.3.6.1.5.6 | Scalarpm1008CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.3.6.1.6 | Nodepm1008CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.3.6.1.6.1 | Scalarpm1008CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.3.6.1.6.5 | Scalarpm1008CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.3.6.1.6.6 | Scalarpm1008CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.3.6.1.6.7 | Scalarpm1008CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.3.6.1.6.8 | Scalarpm1008CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.3.6.1.192 | Nodepm1008CtrlledTest | |||
| 1.3.6.1.4.1.20044.3.6.1.192.1 | Scalarpm1008CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.3.6.1.192.2 | Scalarpm1008CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.3.6.1.192.3 | Scalarpm1008CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.3.6.1.193 | Nodepm1008CtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.3.6.1.193.1 | Scalarpm1008CtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.3.6.1.197 | Nodepm1008CtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.3.6.1.197.1 | Scalarpm1008CtrlMaintenanceMode | read-write | current | Module Maintenance Mode :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.3.6.1.198 | Nodepm1008CtrldccEnable | |||
| 1.3.6.1.4.1.20044.3.6.1.198.1 | Scalarpm1008CtrlDccEnable | read-write | current | DCC Enable :This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
| 1.3.6.1.4.1.20044.3.6.2 | Nodepm1008CtrlClient | |||
| 1.3.6.1.4.1.20044.3.6.2.16 | Tablepm1008CtrlaccessLoopTable | not-accessible | current | List of pm1008CtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.3.6.2.16.1 | Rowpm1008CtrlaccessLoopEntry | not-accessible | current | Row definition for the pm1008CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.3.6.2.16.1.1 | Columnpm1008CtrlaccessLoopIndex | read-only | current | Index definition for the pm1008CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.3.6.2.16.1.2 | Columnpm1008CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.3.6.2.18 | Tablepm1008CtrlportOosModeTable | not-accessible | current | List of pm1008CtrlportOosMode Article |
| 1.3.6.1.4.1.20044.3.6.2.18.1 | Rowpm1008CtrlportOosModeEntry | not-accessible | current | Row definition for the pm1008CtrlportOosMode table |
| 1.3.6.1.4.1.20044.3.6.2.18.1.1 | Columnpm1008CtrlportOosModeIndex | read-only | current | Index definition for the pm1008CtrlportOosMode table |
| 1.3.6.1.4.1.20044.3.6.2.18.1.2 | Columnpm1008CtrlportOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.3.6.2.19 | Tablepm1008CtrlsfpOnCtrlTable | not-accessible | current | List of pm1008CtrlsfpOnCtrl Article |
| 1.3.6.1.4.1.20044.3.6.2.19.1 | Rowpm1008CtrlsfpOnCtrlEntry | not-accessible | current | Row definition for the pm1008CtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.3.6.2.19.1.1 | Columnpm1008CtrlsfpOnCtrlIndex | read-only | current | Index definition for the pm1008CtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.3.6.2.19.1.2 | Columnpm1008CtrlsfpOnCtrlPortn | read-write | current | Client SFP Optical Laser ON :This OID switches on the SFP. |
| 1.3.6.1.4.1.20044.3.6.2.20 | Tablepm1008CtrlsfpOffCtrlTable | not-accessible | current | List of pm1008CtrlsfpOffCtrl Article |
| 1.3.6.1.4.1.20044.3.6.2.20.1 | Rowpm1008CtrlsfpOffCtrlEntry | not-accessible | current | Row definition for the pm1008CtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.3.6.2.20.1.1 | Columnpm1008CtrlsfpOffCtrlIndex | read-only | current | Index definition for the pm1008CtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.3.6.2.20.1.2 | Columnpm1008CtrlsfpOffCtrlPortn | read-write | current | Client SFP Laser Shutdown :This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.3.6.2.21 | Tablepm1008CtrlcsfUpInsTable | not-accessible | current | List of pm1008CtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.3.6.2.21.1 | Rowpm1008CtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm1008CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.3.6.2.21.1.1 | Columnpm1008CtrlcsfUpInsIndex | read-only | current | Index definition for the pm1008CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.3.6.2.21.1.2 | Columnpm1008CtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.3.6.2.22 | Tablepm1008CtrlcaisDwInsTable | not-accessible | current | List of pm1008CtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.3.6.2.22.1 | Rowpm1008CtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm1008CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.3.6.2.22.1.1 | Columnpm1008CtrlcaisDwInsIndex | read-only | current | Index definition for the pm1008CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.3.6.2.22.1.2 | Columnpm1008CtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.3.6.2.23 | Tablepm1008CtrlflowControlTable | not-accessible | current | List of pm1008CtrlflowControl Article |
| 1.3.6.1.4.1.20044.3.6.2.23.1 | Rowpm1008CtrlflowControlEntry | not-accessible | current | Row definition for the pm1008CtrlflowControl table |
| 1.3.6.1.4.1.20044.3.6.2.23.1.1 | Columnpm1008CtrlflowControlIndex | read-only | current | Index definition for the pm1008CtrlflowControl table |
| 1.3.6.1.4.1.20044.3.6.2.23.1.2 | Columnpm1008CtrlflowControlPortn | read-write | current | Flow Control Assertion :This OID, when set, asserts a Pause Frame management on the client Port |
| 1.3.6.1.4.1.20044.3.6.2.26 | Tablepm1008CtrlclientAccessTermLoopTable | not-accessible | current | List of pm1008CtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.3.6.2.26.1 | Rowpm1008CtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm1008CtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.3.6.2.26.1.1 | Columnpm1008CtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm1008CtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.3.6.2.26.1.2 | Columnpm1008CtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.3.6.2.42 | Tablepm1008CtrlselectMultirateTable | not-accessible | current | List of pm1008CtrlselectMultirate Article |
| 1.3.6.1.4.1.20044.3.6.2.42.1 | Rowpm1008CtrlselectMultirateEntry | not-accessible | current | Row definition for the pm1008CtrlselectMultirate table |
| 1.3.6.1.4.1.20044.3.6.2.42.1.1 | Columnpm1008CtrlselectMultirateIndex | read-only | current | Index definition for the pm1008CtrlselectMultirate table |
| 1.3.6.1.4.1.20044.3.6.2.42.1.2 | Columnpm1008CtrlselectMultiratePortn | read-write | current | Input Bandwidth Limitation :This control defines the input bandwidth limitation (100 Mb/s, 250 Mb/s, 500 Mb/s or 1Gb/s). <Help> This control defines the input … |
| 1.3.6.1.4.1.20044.3.6.2.48 | Tablepm1008CtrlprotocolTable | not-accessible | current | List of pm1008Ctrlprotocol Article |
| 1.3.6.1.4.1.20044.3.6.2.48.1 | Rowpm1008CtrlprotocolEntry | not-accessible | current | Row definition for the pm1008Ctrlprotocol table |
| 1.3.6.1.4.1.20044.3.6.2.48.1.1 | Columnpm1008CtrlprotocolIndex | read-only | current | Index definition for the pm1008Ctrlprotocol table |
| 1.3.6.1.4.1.20044.3.6.2.48.1.2 | Columnpm1008CtrlprotocolPortn | read-write | current | Client Protocol: This OID sets the protocol of the Client port. |
| 1.3.6.1.4.1.20044.3.6.3 | Nodepm1008CtrlLine | |||
| 1.3.6.1.4.1.20044.3.6.3.64 | Nodepm1008CtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.3.6.3.64.1 | Scalarpm1008CtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.3.6.3.66 | Nodepm1008CtrllineLoop | |||
| 1.3.6.1.4.1.20044.3.6.3.66.1 | Scalarpm1008CtrlLineLoop | read-write | deprecated | PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups… |
| 1.3.6.1.4.1.20044.3.6.3.67 | Nodepm1008CtrlmsAis | |||
| 1.3.6.1.4.1.20044.3.6.3.67.1 | Scalarpm1008CtrlMsAis | read-write | current | Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
| 1.3.6.1.4.1.20044.3.6.3.69 | Tablepm1008CtrlfecDisableTable | not-accessible | current | List of pm1008CtrlfecDisable Article |
| 1.3.6.1.4.1.20044.3.6.3.69.1 | Rowpm1008CtrlfecDisableEntry | not-accessible | current | Row definition for the pm1008CtrlfecDisable table |
| 1.3.6.1.4.1.20044.3.6.3.69.1.1 | Columnpm1008CtrlfecDisableIndex | read-only | current | Index definition for the pm1008CtrlfecDisable table |
| 1.3.6.1.4.1.20044.3.6.3.69.1.2 | Columnpm1008CtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.3.6.3.73 | Nodepm1008CtrlProtMgnt | |||
| 1.3.6.1.4.1.20044.3.6.3.73.1 | Scalarpm1008CtrlLineNumber | read-write | current | Active Line Number : This OID sets the active line number |
| 1.3.6.1.4.1.20044.3.6.3.73.2 | Scalarpm1008CtrlProtMode | read-write | current | Line Switch Mode (Auto Or Manual) :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the… |
| 1.3.6.1.4.1.20044.3.6.3.74 | Tablepm1008CtrllineOosModeTable | not-accessible | current | List of pm1008CtrllineOosMode Article |
| 1.3.6.1.4.1.20044.3.6.3.74.1 | Rowpm1008CtrllineOosModeEntry | not-accessible | current | Row definition for the pm1008CtrllineOosMode table |
| 1.3.6.1.4.1.20044.3.6.3.74.1.1 | Columnpm1008CtrllineOosModeIndex | read-only | current | Index definition for the pm1008CtrllineOosMode table |
| 1.3.6.1.4.1.20044.3.6.3.74.1.2 | Columnpm1008CtrllineOosModePortn | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.3.6.3.208 | Tablepm1008CtrlxfpOnoffTable | not-accessible | current | List of pm1008CtrlxfpOnoff Article |
| 1.3.6.1.4.1.20044.3.6.3.208.1 | Rowpm1008CtrlxfpOnoffEntry | not-accessible | current | Row definition for the pm1008CtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.3.6.3.208.1.1 | Columnpm1008CtrlxfpOnoffIndex | read-only | current | Index definition for the pm1008CtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.3.6.3.208.1.2 | Columnpm1008CtrlxfpOnoffPortn | read-write | current | Line Optical Laser Shutdown :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.3.6.3.209 | Tablepm1008CtrlxfpLineLoopTable | not-accessible | current | List of pm1008CtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.3.6.3.209.1 | Rowpm1008CtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pm1008CtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.3.6.3.209.1.1 | Columnpm1008CtrlxfpLineLoopIndex | read-only | current | Index definition for the pm1008CtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.3.6.3.209.1.2 | Columnpm1008CtrlxfpLineLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.3.6.3.210 | Tablepm1008CtrlxfpXfiLoopTable | not-accessible | current | List of pm1008CtrlxfpXfiLoop Article |
| 1.3.6.1.4.1.20044.3.6.3.210.1 | Rowpm1008CtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pm1008CtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.3.6.3.210.1.1 | Columnpm1008CtrlxfpXfiLoopIndex | read-only | current | Index definition for the pm1008CtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.3.6.3.210.1.2 | Columnpm1008CtrlxfpXfiLoopPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.3.6.3.212 | Tablepm1008CtrllineTunableChannelTable | not-accessible | current | List of pm1008CtrllineTunableChannel Article |
| 1.3.6.1.4.1.20044.3.6.3.212.1 | Rowpm1008CtrllineTunableChannelEntry | not-accessible | current | Row definition for the pm1008CtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.3.6.3.212.1.1 | Columnpm1008CtrllineTunableChannelIndex | read-only | current | Index definition for the pm1008CtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.3.6.3.212.1.2 | Columnpm1008CtrllineTunableChannelPortn | read-write | current | ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
| 1.3.6.1.4.1.20044.3.6.3.213 | Tablepm1008CtrllinePhotodiodeModeTable | not-accessible | current | List of pm1008CtrllinePhotodiodeMode Article |
| 1.3.6.1.4.1.20044.3.6.3.213.1 | Rowpm1008CtrllinePhotodiodeModeEntry | not-accessible | current | Row definition for the pm1008CtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.3.6.3.213.1.1 | Columnpm1008CtrllinePhotodiodeModeIndex | read-only | current | Index definition for the pm1008CtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.3.6.3.213.1.2 | Columnpm1008CtrllinePhotodiodeModePortn | read-write | current | OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL… |
| 1.3.6.1.4.1.20044.3.6.3.214 | Tablepm1008CtrllinePhotodiodeValueTable | not-accessible | current | List of pm1008CtrllinePhotodiodeValue Article |
| 1.3.6.1.4.1.20044.3.6.3.214.1 | Rowpm1008CtrllinePhotodiodeValueEntry | not-accessible | current | Row definition for the pm1008CtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.3.6.3.214.1.1 | Columnpm1008CtrllinePhotodiodeValueIndex | read-only | current | Index definition for the pm1008CtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.3.6.3.214.1.2 | Columnpm1008CtrllinePhotodiodeValuePortn | read-write | current | OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl… |
| 1.3.6.1.4.1.20044.3.6.3.215 | Tablepm1008CtrllinePowerLaserTable | not-accessible | current | List of pm1008CtrllinePowerLaser Article |
| 1.3.6.1.4.1.20044.3.6.3.215.1 | Rowpm1008CtrllinePowerLaserEntry | not-accessible | current | Row definition for the pm1008CtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.3.6.3.215.1.1 | Columnpm1008CtrllinePowerLaserIndex | read-only | current | Index definition for the pm1008CtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.3.6.3.215.1.2 | Columnpm1008CtrllinePowerLaserPortn | read-write | current | Line Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines… |
| 1.3.6.1.4.1.20044.3.7 | Nodepm1008ri | |||
| 1.3.6.1.4.1.20044.3.7.1 | Nodepm1008riTable | |||
| 1.3.6.1.4.1.20044.3.7.1.1 | Tablepm1008RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.3.7.1.1.1 | Rowpm1008RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.3.7.1.1.1.1 | Columnpm1008RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.3.7.1.1.1.2 | Columnpm1008Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.3.7.1.2 | Tablepm1008RinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.3.7.1.2.1 | Rowpm1008RinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.3.7.1.2.1.1 | Columnpm1008RinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.3.7.1.2.1.2 | Columnpm1008RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.3.7.2 | Scalarpm1008RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.3.7.3 | Scalarpm1008RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.3.7.4 | Scalarpm1008RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.3.7.5 | Scalarpm1008RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.3.7.6 | Scalarpm1008RinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.3.8 | Nodepm1008download | |||
| 1.3.6.1.4.1.20044.3.8.1 | Nodepm1008DwlOther | |||
| 1.3.6.1.4.1.20044.3.8.1.0 | Nodepm1008DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.3.8.1.0.1 | Scalarpm1008DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.3.8.1.0.2 | Scalarpm1008DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.3.8.1.1 | Nodepm1008DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.3.8.1.1.1 | Scalarpm1008DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.3.8.1.1.2 | Scalarpm1008DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.3.8.1.1.5 | Scalarpm1008DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.3.8.1.1.6 | Scalarpm1008DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.3.8.1.2 | Nodepm1008DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.3.8.1.2.1 | Scalarpm1008DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.3.8.1.2.2 | Scalarpm1008DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.3.8.1.2.3 | Scalarpm1008DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.3.8.1.2.4 | Scalarpm1008DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.3.8.1.2.5 | Scalarpm1008DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.3.8.1.2.6 | Scalarpm1008DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.3.8.1.2.7 | Scalarpm1008DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.3.8.1.2.8 | Scalarpm1008DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.3.8.2 | Nodepm1008DwlClient | |||
| 1.3.6.1.4.1.20044.3.8.3 | Nodepm1008DwlLine | |||
| 1.3.6.1.4.1.20044.3.9 | Nodepm1008Config | |||
| 1.3.6.1.4.1.20044.3.9.1 | Nodepm1008CfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.3.9.1.1 | Tablepm1008CfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.1.1.1 | Rowpm1008CfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.3.9.1.1.1.1 | Columnpm1008CfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.3.9.1.1.1.3 | Columnpm1008CfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.3.9.1.1.1.9 | Columnpm1008CfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.3.9.1.1.1.10 | Columnpm1008CfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.3.9.1.1.1.17 | Columnpm1008CfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.3.9.1.1.1.18 | Columnpm1008CfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.3.9.1.1.1.19 | Columnpm1008CfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.3.9.1.1.1.20 | Columnpm1008CfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.3.9.2 | Nodepm1008CfgStartup | |||
| 1.3.6.1.4.1.20044.3.9.2.1 | Tablepm1008CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.2.1.1 | Rowpm1008CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.3.9.2.1.1.1 | Columnpm1008CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.3.9.2.1.1.3 | Columnpm1008CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.3.9.2.1.1.4 | Columnpm1008CfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.3.9.2.1.1.6 | Columnpm1008CfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.3.9.2.2 | Nodepm1008tablelineStartup | |||
| 1.3.6.1.4.1.20044.3.9.2.2.2 | Scalarpm1008CfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.3.9.2.2.5 | Scalarpm1008CfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.3.9.2.2.6 | Scalarpm1008CfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.3.9.2.2.7 | Scalarpm1008CfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.3.9.2.3 | Tablepm1008CfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.2.3.1 | Rowpm1008CfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.3.9.2.3.1.1 | Columnpm1008CfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.3.9.2.3.1.3 | Columnpm1008CfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.3.9.2.3.1.4 | Columnpm1008CfgDataRateConfXfpPortn | read-write | deprecated | :Reserved |
| 1.3.6.1.4.1.20044.3.9.3 | Nodepm1008CfgLabels | |||
| 1.3.6.1.4.1.20044.3.9.3.1 | Tablepm1008CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.3.1.1 | Rowpm1008CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.3.9.3.1.1.1 | Columnpm1008CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.3.9.3.1.1.3 | Columnpm1008CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.3.9.3.2 | Tablepm1008CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.3.2.1 | Rowpm1008CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.3.9.3.2.1.1 | Columnpm1008CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.3.9.3.2.1.3 | Columnpm1008CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.3.9.4 | Nodepm1008CfgStartuptlh | |||
| 1.3.6.1.4.1.20044.3.9.4.1 | Tablepm1008CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.4.1.1 | Rowpm1008CfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.3.9.4.1.1.1 | Columnpm1008CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.3.9.4.1.1.3 | Columnpm1008CfgNuPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.3.9.4.1.1.4 | Columnpm1008CfgLineDitherRatePortn | read-write | current | Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.4.1.1.5 | Columnpm1008CfgLineDitherFhzPortn | read-write | current | Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.4.1.1.6 | Columnpm1008CfgLinePwrLaserPortn | read-write | current | Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
| 1.3.6.1.4.1.20044.3.9.4.1.1.7 | Columnpm1008CfgLineFCurrentPortn | read-write | current | Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.4.1.1.8 | Columnpm1008CfgLineGridCurrentPortn | read-write | current | Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.4.1.1.9 | Columnpm1008CfgFPortn | read-write | current | Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.4.1.1.10 | Columnpm1008CfgReservedPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.3.9.4.1.1.11 | Columnpm1008CfgLinePhotodiodeModePortn | read-write | current | Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.4.1.1.12 | Columnpm1008CfgLinePhotodiodeValuePortn | read-write | current | Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH |
| 1.3.6.1.4.1.20044.3.9.5 | Nodepm1008CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.3.9.5.1 | Tablepm1008CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.3.9.5.1.1 | Rowpm1008CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.3.9.5.1.1.1 | Columnpm1008CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.3.9.5.1.1.3 | Columnpm1008CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.3.9.5.1.1.4 | Columnpm1008CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.3.9.5.1.1.5 | Columnpm1008CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.3.9.5.1.1.6 | Columnpm1008CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.3.9.5.1.1.7 | Columnpm1008CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.3.9.257 | Scalarpm1008CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.3.10 | Nodepm1008traps | |||
| 1.3.6.1.4.1.20044.3.10.2 | Scalarpm1008trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.3.10.3 | Scalarpm1008trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.3.10.4 | Scalarpm1008trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.3.10.30 | Notificationpm1008LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.3.10.31 | Notificationpm1008LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.3.10.32 | Notificationpm1008LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.3.10.33 | Notificationpm1008LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.3.10.34 | Notificationpm1008LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.3.10.35 | Notificationpm1008LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.3.10.40 | Notificationpm1008ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.3.10.41 | Notificationpm1008ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.3.10.42 | Notificationpm1008ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.3.10.43 | Notificationpm1008ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.3.10.44 | Notificationpm1008ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.3.10.45 | Notificationpm1008ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.3.10.50 | Notificationpm1008PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.3.10.51 | Notificationpm1008PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.3.11 | Nodepm1008Monitoring | |||
| 1.3.6.1.4.1.20044.3.11.1 | Nodepm1008MonOther | |||
| 1.3.6.1.4.1.20044.3.11.1.3 | Nodepm1008MonRmon | |||
| 1.3.6.1.4.1.20044.3.11.1.3.359 | Scalarpm1008MonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.3.11.1.3.360 | Scalarpm1008MonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.3.11.2 | Nodepm1008MonClient | |||
| 1.3.6.1.4.1.20044.3.11.2.4 | Nodepm1008MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.3.11.2.4.16 | Tablepm1008MonupRmonByteCntTable | not-accessible | current | List of pm1008MonupRmonByteCnt Article |
| 1.3.6.1.4.1.20044.3.11.2.4.16.1 | Rowpm1008MonupRmonByteCntEntry | not-accessible | current | Row definition for the pm1008MonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.16.1.1 | Columnpm1008MonupRmonByteCntIndex | read-only | current | Index definition for the pm1008MonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.16.1.2 | Columnpm1008MonupRmonByteCntValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.3.11.2.4.16.1.3 | Columnpm1008MonupRmonByteCntErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.3.11.2.4.16.1.4 | Columnpm1008MonupRmonByteCntOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.3.11.2.4.24 | Tablepm1008MonupRmonCrcErrorCntTable | not-accessible | current | List of pm1008MonupRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.3.11.2.4.24.1 | Rowpm1008MonupRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm1008MonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.24.1.1 | Columnpm1008MonupRmonCrcErrorCntIndex | read-only | current | Index definition for the pm1008MonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.24.1.2 | Columnpm1008MonupRmonCrcErrorCntValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors rece… |
| 1.3.6.1.4.1.20044.3.11.2.4.24.1.3 | Columnpm1008MonupRmonCrcErrorCntErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.3.11.2.4.24.1.4 | Columnpm1008MonupRmonCrcErrorCntOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.3.11.2.4.32 | Tablepm1008MonupRmonPacketsCntTable | not-accessible | current | List of pm1008MonupRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.3.11.2.4.32.1 | Rowpm1008MonupRmonPacketsCntEntry | not-accessible | current | Row definition for the pm1008MonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.32.1.1 | Columnpm1008MonupRmonPacketsCntIndex | read-only | current | Index definition for the pm1008MonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.32.1.2 | Columnpm1008MonupRmonPacketsCntValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.3.11.2.4.32.1.3 | Columnpm1008MonupRmonPacketsCntErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.3.11.2.4.32.1.4 | Columnpm1008MonupRmonPacketsCntOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.3.11.2.4.40 | Tablepm1008MonupRmonBroadcastCntTable | not-accessible | current | List of pm1008MonupRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.3.11.2.4.40.1 | Rowpm1008MonupRmonBroadcastCntEntry | not-accessible | current | Row definition for the pm1008MonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.40.1.1 | Columnpm1008MonupRmonBroadcastCntIndex | read-only | current | Index definition for the pm1008MonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.40.1.2 | Columnpm1008MonupRmonBroadcastCntValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.3.11.2.4.40.1.3 | Columnpm1008MonupRmonBroadcastCntErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.3.11.2.4.40.1.4 | Columnpm1008MonupRmonBroadcastCntOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.3.11.2.4.48 | Tablepm1008MonupRmonMulticastCntTable | not-accessible | current | List of pm1008MonupRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.3.11.2.4.48.1 | Rowpm1008MonupRmonMulticastCntEntry | not-accessible | current | Row definition for the pm1008MonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.48.1.1 | Columnpm1008MonupRmonMulticastCntIndex | read-only | current | Index definition for the pm1008MonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.3.11.2.4.48.1.2 | Columnpm1008MonupRmonMulticastCntValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.3.11.2.4.48.1.3 | Columnpm1008MonupRmonMulticastCntErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.3.11.2.4.48.1.4 | Columnpm1008MonupRmonMulticastCntOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm1008AdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pm1008MultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Pm1008OtxChannel | INTEGER | current | Channel selection on OTX-TLH on client and line ports |
| Pm1008OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm1008OtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |