EKINOPS-Pm100gagg-MIB
847 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.91 | IdentitymodulePm100gagg | Creation. | ||
| 1.3.6.1.4.1.20044.91.2 | Nodepm100gaggalarms | |||
| 1.3.6.1.4.1.20044.91.2.1 | Nodepm100gaggAlmOther | |||
| 1.3.6.1.4.1.20044.91.2.1.1 | Nodepm100gaggAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.91.2.1.1.2 | Nodepm100gaggAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.91.2.1.1.2.1 | Scalarpm100gaggAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.91.2.1.1.2.2 | Scalarpm100gaggAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.91.2.1.1.2.3 | Scalarpm100gaggAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.91.2.1.1.2.4 | Scalarpm100gaggAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.91.2.1.1.2.5 | Scalarpm100gaggAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.91.2.1.2 | Nodepm100gaggAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.91.2.1.2.336 | Nodepm100gaggAlmmodFanFail | |||
| 1.3.6.1.4.1.20044.91.2.1.2.336.1 | Scalarpm100gaggAlmFanFail | read-only | current | Fan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition… |
| 1.3.6.1.4.1.20044.91.2.1.2.336.2 | Scalarpm100gaggAlmFanHighSpeed | read-only | current | Fan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro… |
| 1.3.6.1.4.1.20044.91.2.1.3 | Nodepm100gaggAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.91.2.1.3.0 | Nodepm100gaggAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.91.2.1.3.0.2 | Scalarpm100gaggAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.91.2.1.3.0.9 | Scalarpm100gaggAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.91.2.1.3.0.15 | Scalarpm100gaggAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.91.2.1.3.0.16 | Scalarpm100gaggAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.91.2.1.3.78 | Nodepm100gaggAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.91.2.1.3.78.6 | Scalarpm100gaggAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.91.2.1.3.78.7 | Scalarpm100gaggAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.91.2.2 | Nodepm100gaggAlmClient | |||
| 1.3.6.1.4.1.20044.91.2.2.1 | Nodepm100gaggAlmClientNurg | |||
| 1.3.6.1.4.1.20044.91.2.2.1.272 | Tablepm100gaggAlmclientSfpWarnDdmTable | not-accessible | current | List of pm100gaggAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1 | Rowpm100gaggAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm100gaggAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.1 | Columnpm100gaggAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm100gaggAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.2 | Columnpm100gaggAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.3 | Columnpm100gaggAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.4 | Columnpm100gaggAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.5 | Columnpm100gaggAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.6 | Columnpm100gaggAlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.7 | Columnpm100gaggAlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.8 | Columnpm100gaggAlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.9 | Columnpm100gaggAlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.16 | Columnpm100gaggAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.91.2.2.1.272.1.17 | Columnpm100gaggAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.91.2.2.2 | Nodepm100gaggAlmClientUrg | |||
| 1.3.6.1.4.1.20044.91.2.2.2.152 | Tablepm100gaggAlmclientHostLaneFaultTable | not-accessible | current | List of pm100gaggAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1 | Rowpm100gaggAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm100gaggAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.1 | Columnpm100gaggAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm100gaggAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.2 | Columnpm100gaggAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.3 | Columnpm100gaggAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.4 | Columnpm100gaggAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.5 | Columnpm100gaggAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.6 | Columnpm100gaggAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.7 | Columnpm100gaggAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.10 | Columnpm100gaggAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.11 | Columnpm100gaggAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.12 | Columnpm100gaggAlmLfDetectedPortn | read-only | current | Local Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is de… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.13 | Columnpm100gaggAlmRfDetectedPortn | read-only | current | Remote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.14 | Columnpm100gaggAlmStm64ProtocDetectedPortn | read-only | current | STM64 Protocol Detected :This OID indicates a STM64 Protocol detected on the Client Port <Help> Status indicating a STM64 protocol received on the Client side … |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.15 | Columnpm100gaggAlm10gbeProtocDetectedPortn | read-only | current | 10GbE Protocol Detected :This OID indicates a 10GbE Protocol detected on the Client Port <Help> Status indicating a 10GbE protocol received on the Client side … |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.16 | Columnpm100gaggAlmOtu2ProtocDetectedPortn | read-only | current | OTU2 Protocol Detected :This OID indicates an OTU2 Protocol detected on the Client Port <Help> Status indicating a OTU2 protocol received on the Client side <C… |
| 1.3.6.1.4.1.20044.91.2.2.2.152.1.17 | Columnpm100gaggAlmOtu2eProtocDetectedPortn | read-only | current | OTU2e Protocol Detected :This OID indicates an OTU2e Protocol detected on the Client Port <Help> Status indicating a OTU2e protocol received on the Client side… |
| 1.3.6.1.4.1.20044.91.2.2.2.240 | Tablepm100gaggAlmclientSfpAlmDdmTable | not-accessible | current | List of pm100gaggAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1 | Rowpm100gaggAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm100gaggAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.1 | Columnpm100gaggAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm100gaggAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.2 | Columnpm100gaggAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.3 | Columnpm100gaggAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.4 | Columnpm100gaggAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.5 | Columnpm100gaggAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.6 | Columnpm100gaggAlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.7 | Columnpm100gaggAlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.8 | Columnpm100gaggAlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.9 | Columnpm100gaggAlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.16 | Columnpm100gaggAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.91.2.2.2.240.1.17 | Columnpm100gaggAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.91.2.2.2.304 | Tablepm100gaggAlmclientOtnAlmTable | not-accessible | current | List of pm100gaggAlmclientOtnAlm Article |
| 1.3.6.1.4.1.20044.91.2.2.2.304.1 | Rowpm100gaggAlmclientOtnAlmEntry | not-accessible | current | Row definition for the pm100gaggAlmclientOtnAlm table |
| 1.3.6.1.4.1.20044.91.2.2.2.304.1.1 | Columnpm100gaggAlmclientOtnAlmIndex | read-only | current | Index definition for the pm100gaggAlmclientOtnAlm table |
| 1.3.6.1.4.1.20044.91.2.2.2.304.1.2 | Columnpm100gaggAlmClientOtu2eDlomPortn | read-only | current | DLOM :This OID indicates that a Loss Of Multiframe has been detected on client port<Help> This alarm indicates if a Loss Of Multiframe has been detected on the… |
| 1.3.6.1.4.1.20044.91.2.2.3 | Nodepm100gaggAlmClientCrit | |||
| 1.3.6.1.4.1.20044.91.2.2.3.8 | Tablepm100gaggAlmsynthAlmPortTable | not-accessible | current | List of pm100gaggAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1 | Rowpm100gaggAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm100gaggAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.1 | Columnpm100gaggAlmsynthAlmPortIndex | read-only | current | Index definition for the pm100gaggAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.2 | Columnpm100gaggAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.3 | Columnpm100gaggAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.5 | Columnpm100gaggAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.6 | Columnpm100gaggAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.7 | Columnpm100gaggAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.8 | Columnpm100gaggAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.9 | Columnpm100gaggAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.10 | Columnpm100gaggAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.11 | Columnpm100gaggAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.13 | Columnpm100gaggAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.91.2.2.3.8.1.17 | Columnpm100gaggAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.91.2.3 | Nodepm100gaggAlmLine | |||
| 1.3.6.1.4.1.20044.91.2.3.1 | Nodepm100gaggAlmLineNurg | |||
| 1.3.6.1.4.1.20044.91.2.3.1.72 | Tablepm100gaggAlmlineQsfpAlmDdmTable | not-accessible | current | List of pm100gaggAlmlineQsfpAlmDdm Article |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1 | Rowpm100gaggAlmlineQsfpAlmDdmEntry | not-accessible | current | Row definition for the pm100gaggAlmlineQsfpAlmDdm table |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.1 | Columnpm100gaggAlmlineQsfpAlmDdmIndex | read-only | current | Index definition for the pm100gaggAlmlineQsfpAlmDdm table |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.2 | Columnpm100gaggAlmLineTxPwLowAlmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.3 | Columnpm100gaggAlmLineTxPwrHighAlmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.4 | Columnpm100gaggAlmLineTxBiasLowAlmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.5 | Columnpm100gaggAlmLineTxBiasHighAlmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.6 | Columnpm100gaggAlmLineVccLowAlmPortn | read-only | current | Client Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.7 | Columnpm100gaggAlmLineVccHighAlmPortn | read-only | current | Client Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.8 | Columnpm100gaggAlmLineTempLowAlmPortn | read-only | current | Client Trscv Temp Low Alarm :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.9 | Columnpm100gaggAlmLineTempHighAlmPortn | read-only | current | Client Trscv Temp High Alarm :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.16 | Columnpm100gaggAlmLineRxPwrLowAlmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.91.2.3.1.72.1.17 | Columnpm100gaggAlmLineRxPwrHighAlmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.91.2.3.1.104 | Tablepm100gaggAlmlineQsfpWarnDdmTable | not-accessible | current | List of pm100gaggAlmlineQsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1 | Rowpm100gaggAlmlineQsfpWarnDdmEntry | not-accessible | current | Row definition for the pm100gaggAlmlineQsfpWarnDdm table |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.1 | Columnpm100gaggAlmlineQsfpWarnDdmIndex | read-only | current | Index definition for the pm100gaggAlmlineQsfpWarnDdm table |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.2 | Columnpm100gaggAlmLineTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.3 | Columnpm100gaggAlmLineTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.4 | Columnpm100gaggAlmLineTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.5 | Columnpm100gaggAlmLineTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.6 | Columnpm100gaggAlmLineVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.7 | Columnpm100gaggAlmLineVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.8 | Columnpm100gaggAlmLineTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.9 | Columnpm100gaggAlmLineTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.16 | Columnpm100gaggAlmLineRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.91.2.3.1.104.1.17 | Columnpm100gaggAlmLineRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.91.2.3.2 | Nodepm100gaggAlmLineUrg | |||
| 1.3.6.1.4.1.20044.91.2.3.2.196 | Tablepm100gaggAlmlineHostLaneFaultTable | not-accessible | current | List of pm100gaggAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1 | Rowpm100gaggAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm100gaggAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.1 | Columnpm100gaggAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm100gaggAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.2 | Columnpm100gaggAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.3 | Columnpm100gaggAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.4 | Columnpm100gaggAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.5 | Columnpm100gaggAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.6 | Columnpm100gaggAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.7 | Columnpm100gaggAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.8 | Columnpm100gaggAlmOtu4DdegPortn | read-only | current | OTU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port <Help> This alarm indicates if a Signal Degrade has been detected upon thres… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.9 | Columnpm100gaggAlmClientOtu4DtimPortn | read-only | current | OTU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port <Help> This alarm indicates if a Trace Identifier Mismatch has be… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.12 | Columnpm100gaggAlmLineOchr4DlosPPortn | read-only | current | Ochr4 - DLOS-P :This OID indicates that a Transmitter failure has been detected on line port <Help> This alarm indicates if a Transmitter Failure has been dete… |
| 1.3.6.1.4.1.20044.91.2.3.2.196.1.17 | Columnpm100gaggAlmLineOtu4DlomPortn | read-only | current | OTU4 DLOM :This OID indicates that a Loss Of Multiframe has been detected on line port <Help> This alarm indicates if a Loss Of Multiframe has been detected on… |
| 1.3.6.1.4.1.20044.91.2.3.2.208 | Tablepm100gaggAlmlineOdu4AlmTable | not-accessible | current | List of pm100gaggAlmlineOdu4Alm Article |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1 | Rowpm100gaggAlmlineOdu4AlmEntry | not-accessible | current | Row definition for the pm100gaggAlmlineOdu4Alm table |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.1 | Columnpm100gaggAlmlineOdu4AlmIndex | read-only | current | Index definition for the pm100gaggAlmlineOdu4Alm table |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.4 | Columnpm100gaggAlmLineOdu4DplmPortn | read-only | current | ODU4 DPLM :This OID indicates a Payload Mismatch is detected on the line port<Help> Alarm indicating a Payload Mismatch <Condtype> LINE_ODU4_DPLM <Probcause> r… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.6 | Columnpm100gaggAlmLineOdu4DdegPortn | read-only | current | ODU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation para… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.8 | Columnpm100gaggAlmLineOdu4IaisPortn | read-only | current | ODU4 IAIS :This OID indicates that an Alarm Indication Signal has been inserted on line port <Help> This alarm indicates if an Alarm Indication Signal has been… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.9 | Columnpm100gaggAlmLineOdu4DtimPortn | read-only | current | ODU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port<Help> This alarm indicates if an Trace Identifier Mismatch has be… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.10 | Columnpm100gaggAlmLineOdu4DaisPortn | read-only | current | ODU4 DAIS :This OID indicates that a Alarm Indication SIgnal has been detected on line port<Help> This alarm indicates if an Alarm Indication Signal has been d… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.12 | Columnpm100gaggAlmLineOdu4IociPortn | read-only | current | ODU4 IOCI :This OID indicates that an Open Connection has been inserted on line port <Help> This alarm indicates if an Open Connection Indication has been inse… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.13 | Columnpm100gaggAlmLineOdu4DociPortn | read-only | current | ODU4 DOCI :This OID indicates that a Open Connection has been detected on line port <Help> This alarm indicates if an Open Connection Indication has been detec… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.14 | Columnpm100gaggAlmLineOdu4IbdiPortn | read-only | current | ODU4 IBDI :This OID indicates that a Backward Defect Indication has been inserted on line port <Help> This alarm indicates if a Backward Defect Indication has … |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.15 | Columnpm100gaggAlmLineOdu4DbdiPortn | read-only | current | ODU4 DBDI :This OID indicates that a Backward Defect Indication has been detected on line port<Help> This alarm indicates if a Backward Defect Indication has b… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.16 | Columnpm100gaggAlmLineOdu4IlckPortn | read-only | current | ODU4 ILCK :This OID indicates that a Locked Indication has been inserted on line port <Help> This alarm indicates if a Locked Indication has been inserted on t… |
| 1.3.6.1.4.1.20044.91.2.3.2.208.1.17 | Columnpm100gaggAlmLineOdu4DlckPortn | read-only | current | ODU4 DLCK :This OID indicates that a Locked Indication has been detected on line port <Help> This alarm indicates if a Locked Indication has been detected on t… |
| 1.3.6.1.4.1.20044.91.2.3.3 | Nodepm100gaggAlmLineCrit | |||
| 1.3.6.1.4.1.20044.91.2.3.3.40 | Tablepm100gaggAlmsynthAlmLineTable | not-accessible | current | List of pm100gaggAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1 | Rowpm100gaggAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm100gaggAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.1 | Columnpm100gaggAlmsynthAlmLineIndex | read-only | current | Index definition for the pm100gaggAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.2 | Columnpm100gaggAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.3 | Columnpm100gaggAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.5 | Columnpm100gaggAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.6 | Columnpm100gaggAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.7 | Columnpm100gaggAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.9 | Columnpm100gaggAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.10 | Columnpm100gaggAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.11 | Columnpm100gaggAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.91.2.3.3.40.1.13 | Columnpm100gaggAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.91.3 | Nodepm100gaggmeasures | |||
| 1.3.6.1.4.1.20044.91.3.1 | Nodepm100gaggMesrOther | |||
| 1.3.6.1.4.1.20044.91.3.1.0 | Scalarpm100gaggMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.91.3.1.1 | Scalarpm100gaggMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.91.3.1.7 | Scalarpm100gaggMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.91.3.1.400 | Scalarpm100gaggMesrlineTrscvTemp | read-only | current | LineTrscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (U… |
| 1.3.6.1.4.1.20044.91.3.1.408 | Scalarpm100gaggMesrlineTrscvVoltage | read-only | current | Line Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/100… |
| 1.3.6.1.4.1.20044.91.3.1.500 | Scalarpm100gaggMesrmoduleTempMin | read-only | current | Min Module Temperature :This OID gives the minimum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the minimum … |
| 1.3.6.1.4.1.20044.91.3.1.501 | Scalarpm100gaggMesrmoduleTempMax | read-only | current | Max Module Temperature :This OID gives the maximum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the maximum … |
| 1.3.6.1.4.1.20044.91.3.2 | Nodepm100gaggMesrClient | |||
| 1.3.6.1.4.1.20044.91.3.2.16 | Tablepm100gaggMesrclientTxTempTable | not-accessible | current | List of pm100gaggMesrclientTxTemp Article |
| 1.3.6.1.4.1.20044.91.3.2.16.1 | Rowpm100gaggMesrclientTxTempEntry | not-accessible | current | Row definition for the pm100gaggMesrclientTxTemp table |
| 1.3.6.1.4.1.20044.91.3.2.16.1.1 | Columnpm100gaggMesrclientTxTempIndex | read-only | current | Index definition for the pm100gaggMesrclientTxTemp table |
| 1.3.6.1.4.1.20044.91.3.2.16.1.2 | Columnpm100gaggMesrclientTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.91.3.2.48 | Tablepm100gaggMesrclientTxBiasTable | not-accessible | current | List of pm100gaggMesrclientTxBias Article |
| 1.3.6.1.4.1.20044.91.3.2.48.1 | Rowpm100gaggMesrclientTxBiasEntry | not-accessible | current | Row definition for the pm100gaggMesrclientTxBias table |
| 1.3.6.1.4.1.20044.91.3.2.48.1.1 | Columnpm100gaggMesrclientTxBiasIndex | read-only | current | Index definition for the pm100gaggMesrclientTxBias table |
| 1.3.6.1.4.1.20044.91.3.2.48.1.2 | Columnpm100gaggMesrclientTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (… |
| 1.3.6.1.4.1.20044.91.3.2.80 | Tablepm100gaggMesrclientTxPwrTable | not-accessible | current | List of pm100gaggMesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.91.3.2.80.1 | Rowpm100gaggMesrclientTxPwrEntry | not-accessible | current | Row definition for the pm100gaggMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.91.3.2.80.1.1 | Columnpm100gaggMesrclientTxPwrIndex | read-only | current | Index definition for the pm100gaggMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.91.3.2.80.1.2 | Columnpm100gaggMesrclientTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_… |
| 1.3.6.1.4.1.20044.91.3.2.112 | Tablepm100gaggMesrclientRxPwrTable | not-accessible | current | List of pm100gaggMesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.91.3.2.112.1 | Rowpm100gaggMesrclientRxPwrEntry | not-accessible | current | Row definition for the pm100gaggMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.91.3.2.112.1.1 | Columnpm100gaggMesrclientRxPwrIndex | read-only | current | Index definition for the pm100gaggMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.91.3.2.112.1.2 | Columnpm100gaggMesrclientRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16… |
| 1.3.6.1.4.1.20044.91.3.2.416 | Tablepm100gaggMesrclientTempMinTable | not-accessible | current | List of pm100gaggMesrclientTempMin Article |
| 1.3.6.1.4.1.20044.91.3.2.416.1 | Rowpm100gaggMesrclientTempMinEntry | not-accessible | current | Row definition for the pm100gaggMesrclientTempMin table |
| 1.3.6.1.4.1.20044.91.3.2.416.1.1 | Columnpm100gaggMesrclientTempMinIndex | read-only | current | Index definition for the pm100gaggMesrclientTempMin table |
| 1.3.6.1.4.1.20044.91.3.2.416.1.2 | Columnpm100gaggMesrclientTempMinPortn | read-only | current | Min Client Trscv Temperature :This OID gives the minimum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper… |
| 1.3.6.1.4.1.20044.91.3.2.448 | Tablepm100gaggMesrclientTempMaxTable | not-accessible | current | List of pm100gaggMesrclientTempMax Article |
| 1.3.6.1.4.1.20044.91.3.2.448.1 | Rowpm100gaggMesrclientTempMaxEntry | not-accessible | current | Row definition for the pm100gaggMesrclientTempMax table |
| 1.3.6.1.4.1.20044.91.3.2.448.1.1 | Columnpm100gaggMesrclientTempMaxIndex | read-only | current | Index definition for the pm100gaggMesrclientTempMax table |
| 1.3.6.1.4.1.20044.91.3.2.448.1.2 | Columnpm100gaggMesrclientTempMaxPortn | read-only | current | Max Client Trscv Temperature :This OID gives the maximum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper… |
| 1.3.6.1.4.1.20044.91.3.3 | Nodepm100gaggMesrLine | |||
| 1.3.6.1.4.1.20044.91.3.3.144 | Tablepm100gaggMesrlineTxPwrMinTable | not-accessible | current | List of pm100gaggMesrlineTxPwrMin Article |
| 1.3.6.1.4.1.20044.91.3.3.144.1 | Rowpm100gaggMesrlineTxPwrMinEntry | not-accessible | current | Row definition for the pm100gaggMesrlineTxPwrMin table |
| 1.3.6.1.4.1.20044.91.3.3.144.1.1 | Columnpm100gaggMesrlineTxPwrMinIndex | read-only | current | Index definition for the pm100gaggMesrlineTxPwrMin table |
| 1.3.6.1.4.1.20044.91.3.3.144.1.2 | Columnpm100gaggMesrlineTxPwrMinPortn | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic… |
| 1.3.6.1.4.1.20044.91.3.3.160 | Tablepm100gaggMesrlineTxCompositePwrTable | not-accessible | current | List of pm100gaggMesrlineTxCompositePwr Article |
| 1.3.6.1.4.1.20044.91.3.3.160.1 | Rowpm100gaggMesrlineTxCompositePwrEntry | not-accessible | current | Row definition for the pm100gaggMesrlineTxCompositePwr table |
| 1.3.6.1.4.1.20044.91.3.3.160.1.1 | Columnpm100gaggMesrlineTxCompositePwrIndex | read-only | current | Index definition for the pm100gaggMesrlineTxCompositePwr table |
| 1.3.6.1.4.1.20044.91.3.3.160.1.2 | Columnpm100gaggMesrlineTxCompositePwrPortn | read-only | current | Line Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Line Transceiver, read from the… |
| 1.3.6.1.4.1.20044.91.3.3.176 | Tablepm100gaggMesrlineRxPwrMinTable | not-accessible | current | List of pm100gaggMesrlineRxPwrMin Article |
| 1.3.6.1.4.1.20044.91.3.3.176.1 | Rowpm100gaggMesrlineRxPwrMinEntry | not-accessible | current | Row definition for the pm100gaggMesrlineRxPwrMin table |
| 1.3.6.1.4.1.20044.91.3.3.176.1.1 | Columnpm100gaggMesrlineRxPwrMinIndex | read-only | current | Index definition for the pm100gaggMesrlineRxPwrMin table |
| 1.3.6.1.4.1.20044.91.3.3.176.1.2 | Columnpm100gaggMesrlineRxPwrMinPortn | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic … |
| 1.3.6.1.4.1.20044.91.3.3.192 | Tablepm100gaggMesrlineRxCompositePwrTable | not-accessible | current | List of pm100gaggMesrlineRxCompositePwr Article |
| 1.3.6.1.4.1.20044.91.3.3.192.1 | Rowpm100gaggMesrlineRxCompositePwrEntry | not-accessible | current | Row definition for the pm100gaggMesrlineRxCompositePwr table |
| 1.3.6.1.4.1.20044.91.3.3.192.1.1 | Columnpm100gaggMesrlineRxCompositePwrIndex | read-only | current | Index definition for the pm100gaggMesrlineRxCompositePwr table |
| 1.3.6.1.4.1.20044.91.3.3.192.1.2 | Columnpm100gaggMesrlineRxCompositePwrPortn | read-only | current | Line Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.91.3.3.208 | Tablepm100gaggMesrlineTxPwrMaxTable | not-accessible | current | List of pm100gaggMesrlineTxPwrMax Article |
| 1.3.6.1.4.1.20044.91.3.3.208.1 | Rowpm100gaggMesrlineTxPwrMaxEntry | not-accessible | current | Row definition for the pm100gaggMesrlineTxPwrMax table |
| 1.3.6.1.4.1.20044.91.3.3.208.1.1 | Columnpm100gaggMesrlineTxPwrMaxIndex | read-only | current | Index definition for the pm100gaggMesrlineTxPwrMax table |
| 1.3.6.1.4.1.20044.91.3.3.208.1.2 | Columnpm100gaggMesrlineTxPwrMaxPortn | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic… |
| 1.3.6.1.4.1.20044.91.3.3.240 | Tablepm100gaggMesrlineRxPwrMaxTable | not-accessible | current | List of pm100gaggMesrlineRxPwrMax Article |
| 1.3.6.1.4.1.20044.91.3.3.240.1 | Rowpm100gaggMesrlineRxPwrMaxEntry | not-accessible | current | Row definition for the pm100gaggMesrlineRxPwrMax table |
| 1.3.6.1.4.1.20044.91.3.3.240.1.1 | Columnpm100gaggMesrlineRxPwrMaxIndex | read-only | current | Index definition for the pm100gaggMesrlineRxPwrMax table |
| 1.3.6.1.4.1.20044.91.3.3.240.1.2 | Columnpm100gaggMesrlineRxPwrMaxPortn | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.91.3.3.492 | Scalarpm100gaggMesrlineTempMin | read-only | current | Min Line Trscv Temperature :This OID gives the minimum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur… |
| 1.3.6.1.4.1.20044.91.3.3.496 | Scalarpm100gaggMesrlineTempMax | read-only | current | Max Line Trscv Temperature :This OID gives the maximum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur… |
| 1.3.6.1.4.1.20044.91.4 | Nodepm100gaggcounters | |||
| 1.3.6.1.4.1.20044.91.4.1 | Nodepm100gaggCntOther | |||
| 1.3.6.1.4.1.20044.91.4.2 | Nodepm100gaggCntClient | |||
| 1.3.6.1.4.1.20044.91.4.2.112 | Tablepm100gaggCntclientInputErrorCounterTable | not-accessible | current | List of pm100gaggCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.91.4.2.112.1 | Rowpm100gaggCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm100gaggCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.2.112.1.1 | Columnpm100gaggCntclientInputErrorCounterIndex | read-only | current | Index definition for the pm100gaggCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.2.112.1.2 | Columnpm100gaggCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.91.4.2.112.1.3 | Columnpm100gaggCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.2.112.1.4 | Columnpm100gaggCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.2.144 | Tablepm100gaggCntclientCbipCounterTable | not-accessible | current | List of pm100gaggCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.91.4.2.144.1 | Rowpm100gaggCntclientCbipCounterEntry | not-accessible | current | Row definition for the pm100gaggCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.91.4.2.144.1.1 | Columnpm100gaggCntclientCbipCounterIndex | read-only | current | Index definition for the pm100gaggCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.91.4.2.144.1.2 | Columnpm100gaggCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.91.4.2.144.1.3 | Columnpm100gaggCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.2.144.1.4 | Columnpm100gaggCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.3 | Nodepm100gaggCntLine | |||
| 1.3.6.1.4.1.20044.91.4.3.192 | Tablepm100gaggCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm100gaggCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.192.1 | Rowpm100gaggCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm100gaggCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.192.1.1 | Columnpm100gaggCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm100gaggCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.192.1.2 | Columnpm100gaggCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate af… |
| 1.3.6.1.4.1.20044.91.4.3.192.1.3 | Columnpm100gaggCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.3.192.1.4 | Columnpm100gaggCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.3.193 | Tablepm100gaggCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm100gaggCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.193.1 | Rowpm100gaggCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm100gaggCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.91.4.3.193.1.1 | Columnpm100gaggCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm100gaggCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.91.4.3.193.1.2 | Columnpm100gaggCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.91.4.3.193.1.3 | Columnpm100gaggCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.91.4.3.193.1.4 | Columnpm100gaggCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.91.4.3.194 | Tablepm100gaggCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm100gaggCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.194.1 | Rowpm100gaggCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm100gaggCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.194.1.1 | Columnpm100gaggCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm100gaggCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.194.1.2 | Columnpm100gaggCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.91.4.3.194.1.3 | Columnpm100gaggCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.91.4.3.194.1.4 | Columnpm100gaggCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.91.4.3.195 | Tablepm100gaggCntlineDfrmTimCntTable | not-accessible | current | List of pm100gaggCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.91.4.3.195.1 | Rowpm100gaggCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm100gaggCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.91.4.3.195.1.1 | Columnpm100gaggCntlineDfrmTimCntIndex | read-only | current | Index definition for the pm100gaggCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.91.4.3.195.1.2 | Columnpm100gaggCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.91.4.3.195.1.3 | Columnpm100gaggCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.3.195.1.4 | Columnpm100gaggCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.3.196 | Tablepm100gaggCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of pm100gaggCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.196.1 | Rowpm100gaggCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm100gaggCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.196.1.1 | Columnpm100gaggCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the pm100gaggCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.196.1.2 | Columnpm100gaggCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre-SD FEC Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft … |
| 1.3.6.1.4.1.20044.91.4.3.196.1.3 | Columnpm100gaggCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.3.196.1.4 | Columnpm100gaggCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.3.197 | Tablepm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of pm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.197.1 | Rowpm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.197.1.1 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the pm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.91.4.3.197.1.2 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat… |
| 1.3.6.1.4.1.20044.91.4.3.197.1.3 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.3.197.1.4 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.3.198 | Tablepm100gaggCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of pm100gaggCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.198.1 | Rowpm100gaggCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the pm100gaggCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.91.4.3.198.1.1 | Columnpm100gaggCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the pm100gaggCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.91.4.3.198.1.2 | Columnpm100gaggCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.91.4.3.198.1.3 | Columnpm100gaggCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.3.198.1.4 | Columnpm100gaggCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.91.4.3.199 | Tablepm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of pm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.91.4.3.199.1 | Rowpm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the pm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.91.4.3.199.1.1 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the pm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.91.4.3.199.1.2 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.91.4.3.199.1.3 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.91.4.3.199.1.4 | Columnpm100gaggCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.91.6 | Nodepm100gaggcontrolsWrite | |||
| 1.3.6.1.4.1.20044.91.6.1 | Nodepm100gaggCtrlOther | |||
| 1.3.6.1.4.1.20044.91.6.1.1 | Nodepm100gaggCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.91.6.1.1.1 | Scalarpm100gaggCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.91.6.1.1.2 | Scalarpm100gaggCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.91.6.1.1.10 | Scalarpm100gaggCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.91.6.1.1.14 | Scalarpm100gaggCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.91.6.1.4 | Nodepm100gaggCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.91.6.1.4.1 | Scalarpm100gaggCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.91.6.1.4.2 | Scalarpm100gaggCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.91.6.1.5 | Nodepm100gaggCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.91.6.1.5.2 | Scalarpm100gaggCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.91.6.1.5.3 | Scalarpm100gaggCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.91.6.1.5.5 | Scalarpm100gaggCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.91.6.1.5.6 | Scalarpm100gaggCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.91.6.1.6 | Nodepm100gaggCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.91.6.1.6.1 | Scalarpm100gaggCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.91.6.1.6.5 | Scalarpm100gaggCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.91.6.1.6.6 | Scalarpm100gaggCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.91.6.1.6.7 | Scalarpm100gaggCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.91.6.1.6.8 | Scalarpm100gaggCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.91.6.1.192 | Nodepm100gaggCtrlledTest | |||
| 1.3.6.1.4.1.20044.91.6.1.192.1 | Scalarpm100gaggCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.91.6.1.192.2 | Scalarpm100gaggCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.91.6.1.192.3 | Scalarpm100gaggCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.91.6.1.201 | Nodepm100gaggCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.91.6.1.201.1 | Scalarpm100gaggCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.91.6.1.259 | Nodepm100gaggCtrlresetCount | |||
| 1.3.6.1.4.1.20044.91.6.1.259.1 | Scalarpm100gaggCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.91.6.1.260 | Nodepm100gaggCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.91.6.1.260.1 | Scalarpm100gaggCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.91.6.1.261 | Nodepm100gaggCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.91.6.1.261.1 | Scalarpm100gaggCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.91.6.2 | Nodepm100gaggCtrlClient | |||
| 1.3.6.1.4.1.20044.91.6.2.16 | Tablepm100gaggCtrlaccessLoopTable | not-accessible | current | List of pm100gaggCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.91.6.2.16.1 | Rowpm100gaggCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm100gaggCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.91.6.2.16.1.1 | Columnpm100gaggCtrlaccessLoopIndex | read-only | current | Index definition for the pm100gaggCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.91.6.2.16.1.2 | Columnpm100gaggCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.91.6.2.17 | Tablepm100gaggCtrlclientLoopToLineTable | not-accessible | current | List of pm100gaggCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.91.6.2.17.1 | Rowpm100gaggCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm100gaggCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.91.6.2.17.1.1 | Columnpm100gaggCtrlclientLoopToLineIndex | read-only | current | Index definition for the pm100gaggCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.91.6.2.17.1.2 | Columnpm100gaggCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.91.6.2.21 | Tablepm100gaggCtrlcsfUpInsTable | not-accessible | current | List of pm100gaggCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.91.6.2.21.1 | Rowpm100gaggCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm100gaggCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.91.6.2.21.1.1 | Columnpm100gaggCtrlcsfUpInsIndex | read-only | current | Index definition for the pm100gaggCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.91.6.2.21.1.2 | Columnpm100gaggCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.91.6.2.22 | Tablepm100gaggCtrlcaisDwInsTable | not-accessible | current | List of pm100gaggCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.91.6.2.22.1 | Rowpm100gaggCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm100gaggCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.91.6.2.22.1.1 | Columnpm100gaggCtrlcaisDwInsIndex | read-only | current | Index definition for the pm100gaggCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.91.6.2.22.1.2 | Columnpm100gaggCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.91.6.2.262 | Tablepm100gaggCtrlclientResetAllCountTable | not-accessible | current | List of pm100gaggCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.91.6.2.262.1 | Rowpm100gaggCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm100gaggCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.91.6.2.262.1.1 | Columnpm100gaggCtrlclientResetAllCountIndex | read-only | current | Index definition for the pm100gaggCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.91.6.2.262.1.2 | Columnpm100gaggCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.91.6.3 | Nodepm100gaggCtrlLine | |||
| 1.3.6.1.4.1.20044.91.6.3.64 | Tablepm100gaggCtrlcommAccessLoopTable | not-accessible | current | List of pm100gaggCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.91.6.3.64.1 | Rowpm100gaggCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm100gaggCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.91.6.3.64.1.1 | Columnpm100gaggCtrlcommAccessLoopIndex | read-only | current | Index definition for the pm100gaggCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.91.6.3.64.1.2 | Columnpm100gaggCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.91.6.3.66 | Tablepm100gaggCtrllineLoopTable | not-accessible | current | List of pm100gaggCtrllineLoop Article |
| 1.3.6.1.4.1.20044.91.6.3.66.1 | Rowpm100gaggCtrllineLoopEntry | not-accessible | current | Row definition for the pm100gaggCtrllineLoop table |
| 1.3.6.1.4.1.20044.91.6.3.66.1.1 | Columnpm100gaggCtrllineLoopIndex | read-only | current | Index definition for the pm100gaggCtrllineLoop table |
| 1.3.6.1.4.1.20044.91.6.3.66.1.2 | Columnpm100gaggCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.91.6.3.69 | Tablepm100gaggCtrlfecDisableTable | not-accessible | current | List of pm100gaggCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.91.6.3.69.1 | Rowpm100gaggCtrlfecDisableEntry | not-accessible | current | Row definition for the pm100gaggCtrlfecDisable table |
| 1.3.6.1.4.1.20044.91.6.3.69.1.1 | Columnpm100gaggCtrlfecDisableIndex | read-only | current | Index definition for the pm100gaggCtrlfecDisable table |
| 1.3.6.1.4.1.20044.91.6.3.69.1.2 | Columnpm100gaggCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.91.6.3.209 | Tablepm100gaggCtrlmsaLineLoopTable | not-accessible | current | List of pm100gaggCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.91.6.3.209.1 | Rowpm100gaggCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pm100gaggCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.91.6.3.209.1.1 | Columnpm100gaggCtrlmsaLineLoopIndex | read-only | current | Index definition for the pm100gaggCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.91.6.3.209.1.2 | Columnpm100gaggCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.91.6.3.210 | Tablepm100gaggCtrlmsaTxResetTable | not-accessible | current | List of pm100gaggCtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.91.6.3.210.1 | Rowpm100gaggCtrlmsaTxResetEntry | not-accessible | current | Row definition for the pm100gaggCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.91.6.3.210.1.1 | Columnpm100gaggCtrlmsaTxResetIndex | read-only | current | Index definition for the pm100gaggCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.91.6.3.210.1.2 | Columnpm100gaggCtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.91.6.3.211 | Tablepm100gaggCtrlmsaRxResetTable | not-accessible | current | List of pm100gaggCtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.91.6.3.211.1 | Rowpm100gaggCtrlmsaRxResetEntry | not-accessible | current | Row definition for the pm100gaggCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.91.6.3.211.1.1 | Columnpm100gaggCtrlmsaRxResetIndex | read-only | current | Index definition for the pm100gaggCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.91.6.3.211.1.2 | Columnpm100gaggCtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.91.6.3.212 | Tablepm100gaggCtrlmsaShutdownTable | not-accessible | current | List of pm100gaggCtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.91.6.3.212.1 | Rowpm100gaggCtrlmsaShutdownEntry | not-accessible | current | Row definition for the pm100gaggCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.91.6.3.212.1.1 | Columnpm100gaggCtrlmsaShutdownIndex | read-only | current | Index definition for the pm100gaggCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.91.6.3.212.1.2 | Columnpm100gaggCtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.91.6.3.263 | Tablepm100gaggCtrllineResetAllCountTable | not-accessible | current | List of pm100gaggCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.91.6.3.263.1 | Rowpm100gaggCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm100gaggCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.91.6.3.263.1.1 | Columnpm100gaggCtrllineResetAllCountIndex | read-only | current | Index definition for the pm100gaggCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.91.6.3.263.1.2 | Columnpm100gaggCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.91.7 | Nodepm100gaggri | |||
| 1.3.6.1.4.1.20044.91.7.1 | Nodepm100gaggriTable | |||
| 1.3.6.1.4.1.20044.91.7.1.1 | Tablepm100gaggRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.91.7.1.1.1 | Rowpm100gaggRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.91.7.1.1.1.1 | Columnpm100gaggRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.91.7.1.1.1.2 | Columnpm100gaggRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.91.7.1.2 | Tablepm100gaggRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.91.7.1.2.1 | Rowpm100gaggRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.91.7.1.2.1.1 | Columnpm100gaggRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.91.7.1.2.1.2 | Columnpm100gaggRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.91.7.2 | Scalarpm100gaggRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.91.7.3 | Scalarpm100gaggRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.91.7.4 | Scalarpm100gaggRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.91.7.5 | Scalarpm100gaggRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.91.7.6 | Scalarpm100gaggRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.91.8 | Nodepm100gaggdownload | |||
| 1.3.6.1.4.1.20044.91.8.1 | Nodepm100gaggDwlOther | |||
| 1.3.6.1.4.1.20044.91.8.1.0 | Nodepm100gaggDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.91.8.1.0.1 | Scalarpm100gaggDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.91.8.1.0.2 | Scalarpm100gaggDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.91.8.1.1 | Nodepm100gaggDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.91.8.1.1.1 | Scalarpm100gaggDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.91.8.1.1.2 | Scalarpm100gaggDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.91.8.1.1.5 | Scalarpm100gaggDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.91.8.1.1.6 | Scalarpm100gaggDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.91.8.1.2 | Nodepm100gaggDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.91.8.1.2.1 | Scalarpm100gaggDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.91.8.1.2.2 | Scalarpm100gaggDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.91.8.1.2.3 | Scalarpm100gaggDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.91.8.1.2.4 | Scalarpm100gaggDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.91.8.1.2.5 | Scalarpm100gaggDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.91.8.1.2.6 | Scalarpm100gaggDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.91.8.1.2.7 | Scalarpm100gaggDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.91.8.1.2.8 | Scalarpm100gaggDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.91.8.2 | Nodepm100gaggDwlClient | |||
| 1.3.6.1.4.1.20044.91.8.3 | Nodepm100gaggDwlLine | |||
| 1.3.6.1.4.1.20044.91.9 | Nodepm100gaggConfig | |||
| 1.3.6.1.4.1.20044.91.9.1 | Nodepm100gaggCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.91.9.1.1 | Tablepm100gaggCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.1.1.1 | Rowpm100gaggCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.91.9.1.1.1.1 | Columnpm100gaggCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.91.9.1.1.1.3 | Columnpm100gaggCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.91.9.2 | Nodepm100gaggCfgStartup | |||
| 1.3.6.1.4.1.20044.91.9.2.1 | Tablepm100gaggCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.2.1.1 | Rowpm100gaggCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.91.9.2.1.1.1 | Columnpm100gaggCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.91.9.2.1.1.3 | Columnpm100gaggCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.91.9.2.1.1.4 | Columnpm100gaggCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.91.9.2.1.1.14 | Columnpm100gaggCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.91.9.2.2 | Tablepm100gaggCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.2.2.1 | Rowpm100gaggCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.91.9.2.2.1.1 | Columnpm100gaggCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.91.9.2.2.1.3 | Columnpm100gaggCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.91.9.2.2.1.14 | Columnpm100gaggCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.91.9.2.3 | Tablepm100gaggCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.2.3.1 | Rowpm100gaggCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.91.9.2.3.1.1 | Columnpm100gaggCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.91.9.2.3.1.3 | Columnpm100gaggCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.91.9.2.4 | Tablepm100gaggCfgClientOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.2.4.1 | Rowpm100gaggCfgClientOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.91.9.2.4.1.1 | Columnpm100gaggCfgClientOtxtlhIndex | read-only | current | Index definition for the clientOtxtlh table |
| 1.3.6.1.4.1.20044.91.9.2.4.1.3 | Columnpm100gaggCfgControlsPortn | read-write | deprecated | Defaut Client settings :This register configures the start-up settings on the ports |
| 1.3.6.1.4.1.20044.91.9.2.4.1.6 | Columnpm100gaggCfgClientPwrLaserPortn | read-write | current | Defaut Client output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.91.9.2.4.1.7 | Columnpm100gaggCfgClientFCurrentPortn | read-write | current | Default Client transceiver Channel :This register configures the start-up laser channel of the client transceiver |
| 1.3.6.1.4.1.20044.91.9.2.4.1.8 | Columnpm100gaggCfgClientGridCurrentPortn | read-write | current | Default Client transceiver Grid :This register configures the start-up laser grid of the client transceiver |
| 1.3.6.1.4.1.20044.91.9.2.4.1.9 | Columnpm100gaggCfgClientFoPortn | read-write | current | Default Client first Frequency :This register configures the start-up first frequency of the client transceiver |
| 1.3.6.1.4.1.20044.91.9.3 | Nodepm100gaggCfgLabels | |||
| 1.3.6.1.4.1.20044.91.9.3.1 | Tablepm100gaggCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.3.1.1 | Rowpm100gaggCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.91.9.3.1.1.1 | Columnpm100gaggCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.91.9.3.1.1.3 | Columnpm100gaggCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.91.9.3.2 | Tablepm100gaggCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.3.2.1 | Rowpm100gaggCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.91.9.3.2.1.1 | Columnpm100gaggCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.91.9.3.2.1.3 | Columnpm100gaggCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.91.9.4 | Nodepm100gaggCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.91.9.4.1 | Tablepm100gaggCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.4.1.1 | Rowpm100gaggCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.91.9.4.1.1.1 | Columnpm100gaggCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.91.9.4.1.1.6 | Columnpm100gaggCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.91.9.4.1.1.7 | Columnpm100gaggCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.91.9.4.1.1.8 | Columnpm100gaggCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.91.9.4.1.1.9 | Columnpm100gaggCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.91.9.4.1.1.10 | Columnpm100gaggCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.91.9.5 | Nodepm100gaggCfgOther | |||
| 1.3.6.1.4.1.20044.91.9.5.1 | Nodepm100gaggtablemoduleOther | |||
| 1.3.6.1.4.1.20044.91.9.5.1.2 | Scalarpm100gaggCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.91.9.5.1.3 | Scalarpm100gaggCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.91.9.5.1.4 | Scalarpm100gaggCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.91.9.5.1.5 | Scalarpm100gaggCfgprotocolMode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.91.9.6 | Nodepm100gaggCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.91.9.6.1 | Tablepm100gaggCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.91.9.6.1.1 | Rowpm100gaggCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.91.9.6.1.1.1 | Columnpm100gaggCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.91.9.6.1.1.3 | Columnpm100gaggCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.91.9.6.1.1.4 | Columnpm100gaggCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.91.9.6.1.1.5 | Columnpm100gaggCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.91.9.6.1.1.6 | Columnpm100gaggCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.91.9.6.1.1.7 | Columnpm100gaggCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.91.9.257 | Scalarpm100gaggCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.91.10 | Nodepm100gaggtraps | |||
| 1.3.6.1.4.1.20044.91.10.2 | Scalarpm100gaggtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.91.10.3 | Scalarpm100gaggtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.91.10.4 | Scalarpm100gaggtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.91.10.30 | Notificationpm100gaggLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.91.10.31 | Notificationpm100gaggLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.91.10.32 | Notificationpm100gaggLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.91.10.33 | Notificationpm100gaggLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.91.10.34 | Notificationpm100gaggLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.91.10.35 | Notificationpm100gaggLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.91.10.40 | Notificationpm100gaggClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.91.10.41 | Notificationpm100gaggClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.91.10.42 | Notificationpm100gaggClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.91.10.43 | Notificationpm100gaggClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.91.10.44 | Notificationpm100gaggClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.91.10.45 | Notificationpm100gaggClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.91.10.50 | Notificationpm100gaggPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.91.10.51 | Notificationpm100gaggPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.91.11 | Nodepm100gaggMonitoring | |||
| 1.3.6.1.4.1.20044.91.11.1 | Nodepm100gaggMonOther | |||
| 1.3.6.1.4.1.20044.91.11.1.3 | Nodepm100gaggMonRmon | |||
| 1.3.6.1.4.1.20044.91.11.2 | Nodepm100gaggMonClient | |||
| 1.3.6.1.4.1.20044.91.11.2.4 | Nodepm100gaggMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.91.11.2.4.16 | Tablepm100gaggMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.16.1 | Rowpm100gaggMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.16.1.1 | Columnpm100gaggMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.16.1.2 | Columnpm100gaggMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.91.11.2.4.16.1.3 | Columnpm100gaggMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.16.1.4 | Columnpm100gaggMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.48 | Tablepm100gaggMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.48.1 | Rowpm100gaggMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.48.1.1 | Columnpm100gaggMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.48.1.2 | Columnpm100gaggMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.91.11.2.4.48.1.3 | Columnpm100gaggMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.48.1.4 | Columnpm100gaggMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.80 | Tablepm100gaggMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.80.1 | Rowpm100gaggMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.80.1.1 | Columnpm100gaggMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.80.1.2 | Columnpm100gaggMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.91.11.2.4.80.1.3 | Columnpm100gaggMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.80.1.4 | Columnpm100gaggMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.112 | Tablepm100gaggMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.112.1 | Rowpm100gaggMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.112.1.1 | Columnpm100gaggMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.112.1.2 | Columnpm100gaggMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.91.11.2.4.112.1.3 | Columnpm100gaggMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.112.1.4 | Columnpm100gaggMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.144 | Tablepm100gaggMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.144.1 | Rowpm100gaggMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.144.1.1 | Columnpm100gaggMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.144.1.2 | Columnpm100gaggMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.91.11.2.4.144.1.3 | Columnpm100gaggMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.144.1.4 | Columnpm100gaggMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.176 | Tablepm100gaggMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.176.1 | Rowpm100gaggMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.176.1.1 | Columnpm100gaggMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.176.1.2 | Columnpm100gaggMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.91.11.2.4.176.1.3 | Columnpm100gaggMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.176.1.4 | Columnpm100gaggMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.304 | Tablepm100gaggMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.304.1 | Rowpm100gaggMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.304.1.1 | Columnpm100gaggMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.304.1.2 | Columnpm100gaggMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.91.11.2.4.304.1.3 | Columnpm100gaggMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.304.1.4 | Columnpm100gaggMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.336 | Tablepm100gaggMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pm100gaggMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.336.1 | Rowpm100gaggMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pm100gaggMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.336.1.1 | Columnpm100gaggMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pm100gaggMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.91.11.2.4.336.1.2 | Columnpm100gaggMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.91.11.2.4.336.1.3 | Columnpm100gaggMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.336.1.4 | Columnpm100gaggMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.400 | Tablepm100gaggMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.400.1 | Rowpm100gaggMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.400.1.1 | Columnpm100gaggMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.400.1.2 | Columnpm100gaggMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.91.11.2.4.400.1.3 | Columnpm100gaggMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.400.1.4 | Columnpm100gaggMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.432 | Tablepm100gaggMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.432.1 | Rowpm100gaggMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.432.1.1 | Columnpm100gaggMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.432.1.2 | Columnpm100gaggMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.91.11.2.4.432.1.3 | Columnpm100gaggMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.432.1.4 | Columnpm100gaggMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.464 | Tablepm100gaggMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.464.1 | Rowpm100gaggMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.464.1.1 | Columnpm100gaggMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.464.1.2 | Columnpm100gaggMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.91.11.2.4.464.1.3 | Columnpm100gaggMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.464.1.4 | Columnpm100gaggMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.496 | Tablepm100gaggMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.496.1 | Rowpm100gaggMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.496.1.1 | Columnpm100gaggMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.496.1.2 | Columnpm100gaggMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.91.11.2.4.496.1.3 | Columnpm100gaggMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.496.1.4 | Columnpm100gaggMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.528 | Tablepm100gaggMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.528.1 | Rowpm100gaggMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.528.1.1 | Columnpm100gaggMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.528.1.2 | Columnpm100gaggMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.91.11.2.4.528.1.3 | Columnpm100gaggMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.528.1.4 | Columnpm100gaggMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.560 | Tablepm100gaggMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.560.1 | Rowpm100gaggMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.560.1.1 | Columnpm100gaggMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.560.1.2 | Columnpm100gaggMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.91.11.2.4.560.1.3 | Columnpm100gaggMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.560.1.4 | Columnpm100gaggMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.688 | Tablepm100gaggMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.688.1 | Rowpm100gaggMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.688.1.1 | Columnpm100gaggMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.688.1.2 | Columnpm100gaggMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.91.11.2.4.688.1.3 | Columnpm100gaggMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.688.1.4 | Columnpm100gaggMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.720 | Tablepm100gaggMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pm100gaggMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.91.11.2.4.720.1 | Rowpm100gaggMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm100gaggMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.720.1.1 | Columnpm100gaggMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pm100gaggMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.91.11.2.4.720.1.2 | Columnpm100gaggMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.91.11.2.4.720.1.3 | Columnpm100gaggMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.91.11.2.4.720.1.4 | Columnpm100gaggMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.91.11.5 | Nodepm100gaggMonPerfOther | |||
| 1.3.6.1.4.1.20044.91.11.5.1 | Nodepm100gaggMonPerfSync | |||
| 1.3.6.1.4.1.20044.91.11.5.1.257 | Scalarpm100gaggPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.91.11.5.1.259 | Scalarpm100gaggPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.91.11.5.1.260 | Scalarpm100gaggPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.91.11.5.2 | Nodepm100gaggMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.91.11.5.2.1 | Scalarpm100gaggPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.91.11.5.2.2 | Scalarpm100gaggPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.91.11.5.2.5 | Scalarpm100gaggPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.91.11.5.2.6 | Scalarpm100gaggPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.91.11.5.2.7 | Scalarpm100gaggPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.91.11.5.2.8 | Scalarpm100gaggPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.91.11.6 | Nodepm100gaggMonPerfClient | |||
| 1.3.6.1.4.1.20044.91.11.6.16 | Tablepm100gaggPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pm100gaggPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.91.11.6.16.1 | Rowpm100gaggPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.6.16.1.1 | Columnpm100gaggPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.6.16.1.2 | Columnpm100gaggPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.16.1.3 | Columnpm100gaggPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.16.1.4 | Columnpm100gaggPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.16.1.5 | Columnpm100gaggPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.16.1.6 | Columnpm100gaggPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.16.1.7 | Columnpm100gaggPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.16.1.8 | Columnpm100gaggPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.16.1.9 | Columnpm100gaggPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.16.1.10 | Columnpm100gaggPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.16.1.11 | Columnpm100gaggPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.48 | Tablepm100gaggPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.6.48.1 | Rowpm100gaggPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.48.1.1 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.48.1.2 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.48.1.3 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.48.1.4 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.48.1.5 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.48.1.6 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.48.1.7 | Columnpm100gaggPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.48.1.8 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.48.1.9 | Columnpm100gaggPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.48.1.10 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.48.1.11 | Columnpm100gaggPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.80 | Tablepm100gaggPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pm100gaggPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.91.11.6.80.1 | Rowpm100gaggPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.6.80.1.1 | Columnpm100gaggPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.6.80.1.2 | Columnpm100gaggPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.80.1.3 | Columnpm100gaggPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.80.1.4 | Columnpm100gaggPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.80.1.5 | Columnpm100gaggPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.80.1.6 | Columnpm100gaggPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.80.1.7 | Columnpm100gaggPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.80.1.8 | Columnpm100gaggPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.80.1.9 | Columnpm100gaggPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.80.1.10 | Columnpm100gaggPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.80.1.11 | Columnpm100gaggPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.112 | Tablepm100gaggPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.6.112.1 | Rowpm100gaggPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.112.1.1 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.112.1.2 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.112.1.3 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.112.1.4 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.112.1.5 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.112.1.6 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.112.1.7 | Columnpm100gaggPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.112.1.8 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.112.1.9 | Columnpm100gaggPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.112.1.10 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.112.1.11 | Columnpm100gaggPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.144 | Tablepm100gaggPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pm100gaggPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.91.11.6.144.1 | Rowpm100gaggPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.6.144.1.1 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.6.144.1.2 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.144.1.3 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.144.1.4 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.144.1.5 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.144.1.6 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.144.1.7 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.144.1.8 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.144.1.9 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.144.1.10 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.144.1.11 | Columnpm100gaggPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.176 | Tablepm100gaggPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.6.176.1 | Rowpm100gaggPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.176.1.1 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.176.1.2 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.176.1.3 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.176.1.4 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.176.1.5 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.176.1.6 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.176.1.7 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.176.1.8 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.176.1.9 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.176.1.10 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.176.1.11 | Columnpm100gaggPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.208 | Tablepm100gaggPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pm100gaggPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.91.11.6.208.1 | Rowpm100gaggPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.6.208.1.1 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.6.208.1.2 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.208.1.3 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.208.1.4 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.208.1.5 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.208.1.6 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.208.1.7 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.208.1.8 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.208.1.9 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.208.1.10 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.208.1.11 | Columnpm100gaggPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.240 | Tablepm100gaggPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.6.240.1 | Rowpm100gaggPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.240.1.1 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.240.1.2 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.240.1.3 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.6.240.1.4 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.240.1.5 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.240.1.6 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.240.1.7 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.240.1.8 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.240.1.9 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.240.1.10 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.240.1.11 | Columnpm100gaggPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.6.848 | Tablepm100gaggPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm100gaggPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.91.11.6.848.1 | Rowpm100gaggPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm100gaggPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.6.848.1.1 | Columnpm100gaggPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm100gaggPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.6.848.1.4 | Columnpm100gaggperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.848.1.5 | Columnpm100gaggperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.848.1.6 | Columnpm100gaggperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.848.1.7 | Columnpm100gaggperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.91.11.6.848.1.28 | Columnpm100gaggperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.848.1.29 | Columnpm100gaggperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.848.1.30 | Columnpm100gaggperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.848.1.31 | Columnpm100gaggperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.91.11.6.880 | Tablepm100gaggPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.6.880.1 | Rowpm100gaggPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.880.1.1 | Columnpm100gaggPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.880.1.4 | Columnpm100gaggperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.880.1.5 | Columnpm100gaggperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.880.1.6 | Columnpm100gaggperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.880.1.7 | Columnpm100gaggperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.91.11.6.880.1.28 | Columnpm100gaggperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.880.1.29 | Columnpm100gaggperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.880.1.30 | Columnpm100gaggperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.880.1.31 | Columnpm100gaggperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.91.11.6.912 | Tablepm100gaggPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm100gaggPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.91.11.6.912.1 | Rowpm100gaggPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm100gaggPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.6.912.1.1 | Columnpm100gaggPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm100gaggPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.6.912.1.4 | Columnpm100gaggperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.912.1.5 | Columnpm100gaggperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.912.1.6 | Columnpm100gaggperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.912.1.7 | Columnpm100gaggperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.91.11.6.912.1.28 | Columnpm100gaggperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.912.1.29 | Columnpm100gaggperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.912.1.30 | Columnpm100gaggperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.912.1.31 | Columnpm100gaggperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.91.11.6.944 | Tablepm100gaggPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.6.944.1 | Rowpm100gaggPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.944.1.1 | Columnpm100gaggPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.6.944.1.4 | Columnpm100gaggperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.944.1.5 | Columnpm100gaggperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.944.1.6 | Columnpm100gaggperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.944.1.7 | Columnpm100gaggperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.91.11.6.944.1.28 | Columnpm100gaggperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.944.1.29 | Columnpm100gaggperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.91.11.6.944.1.30 | Columnpm100gaggperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.91.11.6.944.1.31 | Columnpm100gaggperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.91.11.7 | Nodepm100gaggMonPerfLine | |||
| 1.3.6.1.4.1.20044.91.11.7.336 | Tablepm100gaggPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pm100gaggPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.91.11.7.336.1 | Rowpm100gaggPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.7.336.1.1 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.7.336.1.2 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.336.1.3 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.336.1.4 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.336.1.5 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.336.1.6 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.336.1.7 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.336.1.8 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.336.1.9 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.336.1.10 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.336.1.11 | Columnpm100gaggPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.337 | Tablepm100gaggPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.7.337.1 | Rowpm100gaggPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.337.1.1 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.337.1.2 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.337.1.3 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.337.1.4 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.337.1.5 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.337.1.6 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.337.1.7 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.337.1.8 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.337.1.9 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.337.1.10 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.337.1.11 | Columnpm100gaggPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.338 | Tablepm100gaggPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pm100gaggPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.91.11.7.338.1 | Rowpm100gaggPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.7.338.1.1 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.7.338.1.2 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.338.1.3 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.338.1.4 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.338.1.5 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.338.1.6 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.338.1.7 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.338.1.8 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.338.1.9 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.338.1.10 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.338.1.11 | Columnpm100gaggPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.339 | Tablepm100gaggPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.7.339.1 | Rowpm100gaggPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.339.1.1 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.339.1.2 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.339.1.3 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.339.1.4 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.339.1.5 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.339.1.6 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.339.1.7 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.339.1.8 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.339.1.9 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.339.1.10 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.339.1.11 | Columnpm100gaggPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.352 | Tablepm100gaggPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pm100gaggPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.91.11.7.352.1 | Rowpm100gaggPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.7.352.1.1 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.91.11.7.352.1.2 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.352.1.3 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.352.1.4 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.352.1.5 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.352.1.6 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.352.1.7 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.353 | Tablepm100gaggPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.7.353.1 | Rowpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.353.1.1 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.353.1.2 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.353.1.3 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.353.1.4 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.353.1.5 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.353.1.6 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.353.1.7 | Columnpm100gaggPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.354 | Tablepm100gaggPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pm100gaggPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.91.11.7.354.1 | Rowpm100gaggPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pm100gaggPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.7.354.1.1 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pm100gaggPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.91.11.7.354.1.2 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.354.1.3 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.354.1.4 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.354.1.5 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.354.1.6 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.354.1.7 | Columnpm100gaggPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.355 | Tablepm100gaggPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pm100gaggPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.91.11.7.355.1 | Rowpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm100gaggPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.355.1.1 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm100gaggPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.91.11.7.355.1.2 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.355.1.3 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.91.11.7.355.1.4 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.355.1.5 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.91.11.7.355.1.6 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.91.11.7.355.1.7 | Columnpm100gaggPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm100gaggClientChannel | INTEGER | current | Channel selection on transceiver Client ports |
| Pm100gaggClientProtocolA | INTEGER { protocolclientvalue0A(1), protocolclientvalue1A(2), protocolclientvalue2A(3) } | current | Different values on the protocol on the client ports |
| Pm100gaggClientProtocolB | INTEGER { protocolclientvalue0B(1), protocolclientvalue1B(2), protocolclientvalue2B(3), protocolclientvalue3B(4), protocolclientvalue4B(5) } | current | Different values on the protocol on the client ports |
| Pm100gaggClientProtocolC | INTEGER { protocolclientvalue0C(1) } | current | Different values on the protocol on the client ports |
| Pm100gaggDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pm100gaggOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm100gaggOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm100gaggOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm100gaggProtocolMode | INTEGER { protocolmodevalue0(1), protocolmodevalue1(2), protocolmodevalue2(3) } | current | Different values on the protocol mode |