EKINOPS-Pm20020ma-MIB
1019 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.69 | IdentitymodulePm20020ma | Creation. | ||
| 1.3.6.1.4.1.20044.69.2 | Nodepm20020maalarms | |||
| 1.3.6.1.4.1.20044.69.2.1 | Nodepm20020maAlmOther | |||
| 1.3.6.1.4.1.20044.69.2.1.1 | Nodepm20020maAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.69.2.1.1.2 | Nodepm20020maAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.69.2.1.1.2.1 | Scalarpm20020maAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.69.2.1.1.2.2 | Scalarpm20020maAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.69.2.1.1.2.3 | Scalarpm20020maAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.69.2.1.1.2.4 | Scalarpm20020maAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.69.2.1.1.2.5 | Scalarpm20020maAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.69.2.1.2 | Nodepm20020maAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.69.2.1.2.336 | Nodepm20020maAlmmodFanFail | |||
| 1.3.6.1.4.1.20044.69.2.1.2.336.1 | Scalarpm20020maAlmFanFail | read-only | current | Fan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition… |
| 1.3.6.1.4.1.20044.69.2.1.2.336.2 | Scalarpm20020maAlmFanHighSpeed | read-only | current | Fan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro… |
| 1.3.6.1.4.1.20044.69.2.1.3 | Nodepm20020maAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.69.2.1.3.0 | Nodepm20020maAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.69.2.1.3.0.2 | Scalarpm20020maAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.69.2.1.3.0.9 | Scalarpm20020maAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.69.2.1.3.0.15 | Scalarpm20020maAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.69.2.1.3.0.16 | Scalarpm20020maAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.69.2.1.3.72 | Nodepm20020maAlmclientModuleState | |||
| 1.3.6.1.4.1.20044.69.2.1.3.72.1 | Scalarpm20020maAlmCfpInitialize | read-only | current | Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress <Help> Status indicating the Client Trscv initialization is in progr… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.2 | Scalarpm20020maAlmCfpLowPower | read-only | current | Client Trscv Low Power :This OID indicates the Client Trscv is in low power state <Help> Status indicating the Client Trscv is in low power state <Condtype> CF… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.3 | Scalarpm20020maAlmCfpHighPowerUp | read-only | current | Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state <Help> Status indicating the Client Trscv is leaving Low Power state… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.4 | Scalarpm20020maAlmCfpTxOff | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF <Help> Status indicating the Client Trscv Laser is OFF <Condtype> CFP_TX_OFF <Pro… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.5 | Scalarpm20020maAlmCfpTxTurnOn | read-only | current | Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser <Help> Status indicating the Client Trscv is turning on its laser <Cond… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.6 | Scalarpm20020maAlmCfpReady | read-only | current | Client Trscv Ready :This OID indicates the Client Trscv is ready to operate <Help> Status indicating the Client Trscv is ready to operate <Condtype> CFP_READY … |
| 1.3.6.1.4.1.20044.69.2.1.3.72.7 | Scalarpm20020maAlmCfpFault | read-only | current | Client Trscv Fault :This OID indicates the Client Trscv is in Fault state <Help> Status indicating the Client Trscv is in Fault state <Condtype> CFP_FAULT <Pro… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.8 | Scalarpm20020maAlmCfpTxTurnOff | read-only | current | Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser <Help> Status indicating the Client Trscv is turning off its laser <C… |
| 1.3.6.1.4.1.20044.69.2.1.3.72.9 | Scalarpm20020maAlmCfpHighPowerDown | read-only | current | Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state <Help> Status indicating the Client Trscv is entering Low Power s… |
| 1.3.6.1.4.1.20044.69.2.1.3.73 | Nodepm20020maAlmclientModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.69.2.1.3.73.4 | Scalarpm20020maAlmCfpOutOfAlignment | read-only | current | Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Cli… |
| 1.3.6.1.4.1.20044.69.2.1.3.73.5 | Scalarpm20020maAlmCfpRxNetworkLol | read-only | current | Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface <Help> Alarm indicating of Loss of … |
| 1.3.6.1.4.1.20044.69.2.1.3.73.6 | Scalarpm20020maAlmCfpRxLos | read-only | current | Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.69.2.1.3.73.7 | Scalarpm20020maAlmCfpTxHostLol | read-only | current | Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock… |
| 1.3.6.1.4.1.20044.69.2.1.3.73.8 | Scalarpm20020maAlmCfpTxLosf | read-only | current | Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv <Help> Alarm indicating a Loss of … |
| 1.3.6.1.4.1.20044.69.2.1.3.73.9 | Scalarpm20020maAlmCfpTxCmuLol | read-only | current | Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv <Help> Alarm indicating a Clock Multipli… |
| 1.3.6.1.4.1.20044.69.2.1.3.73.10 | Scalarpm20020maAlmCfpTxJitterPllLol | read-only | current | Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv <Help> Alarm indicating a Tx Jitter PLL… |
| 1.3.6.1.4.1.20044.69.2.1.3.73.11 | Scalarpm20020maAlmCfpLossOfRefclk | read-only | current | Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv <Help> Alarm indicating a Loss of Reference clock … |
| 1.3.6.1.4.1.20044.69.2.1.3.73.14 | Scalarpm20020maAlmCfpHwInterlock | read-only | current | Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity <Help> Alarm indicating the Client Trscv power i… |
| 1.3.6.1.4.1.20044.69.2.1.3.74 | Nodepm20020maAlmclientGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.69.2.1.3.74.1 | Scalarpm20020maAlmCfpSoftGlobAlarmTest | read-only | current | Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose <Help> Status indicating … |
| 1.3.6.1.4.1.20044.69.2.1.3.74.7 | Scalarpm20020maAlmCfpNetworkLaneAlarmWarning2 | read-only | current | Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.8 | Scalarpm20020maAlmCfpModuleState | read-only | current | Client Trscv Module State :This OID indicates the Client Trscv module state <Help> Synthesis alarm indicating the Client Trscv module state <Condtype> CFP_MODU… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.9 | Scalarpm20020maAlmCfpModuleGeneralStatus | read-only | current | Client Trscv General Status :This OID indicates the Client Trscv module general status <Help> Synthesis alarm indicating the Client Trscv module general status… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.10 | Scalarpm20020maAlmCfpModuleFault | read-only | current | Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module <Help> Synthesis alarm indicating at least one Fault is… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.11 | Scalarpm20020maAlmCfpModuleAlarmWarning1 | read-only | current | Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module <Help> Synthesis alarm indicating … |
| 1.3.6.1.4.1.20044.69.2.1.3.74.12 | Scalarpm20020maAlmCfpModuleAlarmWarning2 | read-only | current | Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module <Help> Synthesis alarm indicating at least … |
| 1.3.6.1.4.1.20044.69.2.1.3.74.13 | Scalarpm20020maAlmCfpNetworkLaneAlarmWarning1 | read-only | current | Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.14 | Scalarpm20020maAlmCfpNetworkLaneFaultStatus | read-only | current | Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface <Help> Synthesis alarm… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.15 | Scalarpm20020maAlmCfpHostLaneFaultStatus | read-only | current | Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface <Help> Synthesis alarm indic… |
| 1.3.6.1.4.1.20044.69.2.1.3.74.16 | Scalarpm20020maAlmCfpGlobAlarmAssertion | read-only | current | Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module <Help> Synthesis alarm indicating at least on… |
| 1.3.6.1.4.1.20044.69.2.1.3.78 | Nodepm20020maAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.69.2.1.3.78.1 | Scalarpm20020maAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.2 | Scalarpm20020maAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.3 | Scalarpm20020maAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.4 | Scalarpm20020maAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.5 | Scalarpm20020maAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.69.2.1.3.78.6 | Scalarpm20020maAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.7 | Scalarpm20020maAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.8 | Scalarpm20020maAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.69.2.1.3.78.9 | Scalarpm20020maAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.69.2.1.3.79 | Nodepm20020maAlmmsaModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.69.2.1.3.79.4 | Scalarpm20020maAlmMsaOutOfAlignment | read-only | current | Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Line Tr… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.5 | Scalarpm20020maAlmMsaRxNetworkLol | read-only | current | Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface <Help> Alarm indicating of Loss of Lo… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.6 | Scalarpm20020maAlmMsaRxLos | read-only | current | Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.7 | Scalarpm20020maAlmMsaTxHostLol | read-only | current | Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock is … |
| 1.3.6.1.4.1.20044.69.2.1.3.79.8 | Scalarpm20020maAlmMsaTxLosf | read-only | current | Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv <Help> Alarm indicating a Loss of Sign… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.9 | Scalarpm20020maAlmMsaTxCmuLol | read-only | current | Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Clock Multiplier U… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.10 | Scalarpm20020maAlmMsaTxJitterPllLol | read-only | current | Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Tx Jitter PLL Lo… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.11 | Scalarpm20020maAlmMsaLossOfRefclk | read-only | current | Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv <Help> Alarm indicating a Loss of Reference clock is d… |
| 1.3.6.1.4.1.20044.69.2.1.3.79.14 | Scalarpm20020maAlmMsaHwInterlock | read-only | current | Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity <Help> Alarm indicating the Line Trscv power is high… |
| 1.3.6.1.4.1.20044.69.2.1.3.80 | Nodepm20020maAlmmsaGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.69.2.1.3.80.1 | Scalarpm20020maAlmMsaSoftGlobAlarmTest | read-only | current | Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose <Help> Status indicating the … |
| 1.3.6.1.4.1.20044.69.2.1.3.80.6 | Scalarpm20020maAlmMsaNetworkHostAlarmStatus | read-only | current | Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv <Help> Synthesis alarm indicating the al… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.7 | Scalarpm20020maAlmMsaNetworkLaneAlarmWarning2 | read-only | current | Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.8 | Scalarpm20020maAlmMsaModuleState | read-only | current | Line Trscv Module State :This OID indicates the Line Trscv module state <Help> Synthesis alarm indicating the Line Trscv module state <Condtype> MSA_MODULE_STA… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.9 | Scalarpm20020maAlmMsaModuleGeneralStatus | read-only | current | Line Trscv General Status :This OID indicates the Line Trscv module general <Help> Synthesis alarm indicating the Line Trscv module general status <Condtype> M… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.10 | Scalarpm20020maAlmModuleFault | read-only | current | Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Fault is det… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.11 | Scalarpm20020maAlmMsaModuleAlarmWarning1 | read-only | current | Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.69.2.1.3.80.12 | Scalarpm20020maAlmMsaModuleAlarmWarning2 | read-only | current | Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.69.2.1.3.80.13 | Scalarpm20020maAlmMsaNetworkLaneAlarmWarning1 | read-only | current | Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface <Help> Synthesis alarm indicating a… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.14 | Scalarpm20020maAlmMsaNetworkLaneFaultStatus | read-only | current | Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.15 | Scalarpm20020maAlmMsaHostLaneFaultStatus | read-only | current | Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface <Help> Synthesis alarm indicatin… |
| 1.3.6.1.4.1.20044.69.2.1.3.80.16 | Scalarpm20020maAlmMsaGlobAlarmAssertion | read-only | current | Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Al… |
| 1.3.6.1.4.1.20044.69.2.1.3.81 | Nodepm20020maAlmmsaNetworkTxAlignment | |||
| 1.3.6.1.4.1.20044.69.2.1.3.81.12 | Scalarpm20020maAlmNetTxTimingFault | read-only | current | Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx Timing Fa… |
| 1.3.6.1.4.1.20044.69.2.1.3.81.13 | Scalarpm20020maAlmNetTxReferenceClockFault | read-only | current | Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a … |
| 1.3.6.1.4.1.20044.69.2.1.3.81.14 | Scalarpm20020maAlmNetTxCmuLockFault | read-only | current | Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.69.2.1.3.81.15 | Scalarpm20020maAlmNetTxOutOfAlignment | read-only | current | Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx O… |
| 1.3.6.1.4.1.20044.69.2.1.3.81.16 | Scalarpm20020maAlmNetTxLossOfAlignment | read-only | current | Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.69.2.1.3.82 | Nodepm20020maAlmmsaNetworkRxAlignment | |||
| 1.3.6.1.4.1.20044.69.2.1.3.82.12 | Scalarpm20020maAlmNetRxTimingFault | read-only | current | Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx Timing Fa… |
| 1.3.6.1.4.1.20044.69.2.1.3.82.13 | Scalarpm20020maAlmNetRxOutOfAlignment | read-only | current | Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx O… |
| 1.3.6.1.4.1.20044.69.2.1.3.82.14 | Scalarpm20020maAlmNetRxLossOfAlignment | read-only | current | Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.69.2.1.3.82.15 | Scalarpm20020maAlmNetRxModemLockFault | read-only | current | Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx M… |
| 1.3.6.1.4.1.20044.69.2.1.3.82.16 | Scalarpm20020maAlmNetRxModemSyncDetectFault | read-only | current | Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface <H… |
| 1.3.6.1.4.1.20044.69.2.1.3.83 | Nodepm20020maAlmmsaNetworkHostNetworkAlarmSummary | |||
| 1.3.6.1.4.1.20044.69.2.1.3.83.11 | Scalarpm20020maAlmNetworkTxAlignment | read-only | current | Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.69.2.1.3.83.12 | Scalarpm20020maAlmNetworkRxAlignment | read-only | current | Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.69.2.1.3.83.13 | Scalarpm20020maAlmNetworkRxOtn | read-only | current | Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx OTN Fault i… |
| 1.3.6.1.4.1.20044.69.2.1.3.83.14 | Scalarpm20020maAlmHostRxAlignment | read-only | current | Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Rx Align… |
| 1.3.6.1.4.1.20044.69.2.1.3.83.15 | Scalarpm20020maAlmHostTxAlignment | read-only | current | Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx Align… |
| 1.3.6.1.4.1.20044.69.2.1.3.83.16 | Scalarpm20020maAlmHostTxOtnStatus | read-only | current | Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx OTN Fault is dete… |
| 1.3.6.1.4.1.20044.69.2.1.3.84 | Nodepm20020maAlmmsaHostTxAlignment | |||
| 1.3.6.1.4.1.20044.69.2.1.3.84.13 | Scalarpm20020maAlmHostTxDeskewLockFault | read-only | current | Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Deske… |
| 1.3.6.1.4.1.20044.69.2.1.3.84.14 | Scalarpm20020maAlmHostTxOutOfAlignment | read-only | current | Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Out of … |
| 1.3.6.1.4.1.20044.69.2.1.3.84.15 | Scalarpm20020maAlmHostTxLossOfAlignment | read-only | current | Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Loss … |
| 1.3.6.1.4.1.20044.69.2.1.3.84.16 | Scalarpm20020maAlmHostTxCdrLockFault | read-only | current | Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.69.2.1.3.85 | Nodepm20020maAlmmsaHostRxAlignment | |||
| 1.3.6.1.4.1.20044.69.2.1.3.85.14 | Scalarpm20020maAlmHostRxCmuLockFault | read-only | current | Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.69.2.1.3.85.15 | Scalarpm20020maAlmHostRxOutOfAlignment | read-only | current | Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Out of … |
| 1.3.6.1.4.1.20044.69.2.1.3.85.16 | Scalarpm20020maAlmHostRxLossOfAlignment | read-only | current | Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Loss … |
| 1.3.6.1.4.1.20044.69.2.2 | Nodepm20020maAlmClient | |||
| 1.3.6.1.4.1.20044.69.2.2.1 | Nodepm20020maAlmClientNurg | |||
| 1.3.6.1.4.1.20044.69.2.2.1.88 | Tablepm20020maAlmclientNetworkLaneAlarmWarningTable | not-accessible | current | List of pm20020maAlmclientNetworkLaneAlarmWarning Article |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1 | Rowpm20020maAlmclientNetworkLaneAlarmWarningEntry | not-accessible | current | Row definition for the pm20020maAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.1 | Columnpm20020maAlmclientNetworkLaneAlarmWarningIndex | read-only | current | Index definition for the pm20020maAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.2 | Columnpm20020maAlmClientRxPowerLowAlarmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.3 | Columnpm20020maAlmClientRxPowerLowWarningPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.4 | Columnpm20020maAlmClientRxPowerHighWarningPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.5 | Columnpm20020maAlmClientRxPowerHighAlarmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.6 | Columnpm20020maAlmLaserTempLowAlarmPortn | read-only | current | Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Ala… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.7 | Columnpm20020maAlmClientLaserTempLowWarningPortn | read-only | current | Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> W… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.8 | Columnpm20020maAlmClientLaserTempHighWarningPortn | read-only | current | Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.9 | Columnpm20020maAlmClientLaserTempHighAlarmPortn | read-only | current | Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> A… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.10 | Columnpm20020maAlmClientTxPowerLowAlarmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.11 | Columnpm20020maAlmClientTxPowerLowWarningPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.12 | Columnpm20020maAlmClientTxPowerHighWarningPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.13 | Columnpm20020maAlmClientTxPowerHighAlarmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.14 | Columnpm20020maAlmClientBiasLowAlarmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.15 | Columnpm20020maAlmClientBiasLowWarningPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.16 | Columnpm20020maAlmClientBiasHighWarningPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.69.2.2.1.88.1.17 | Columnpm20020maAlmClientBiasHighAlarmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.69.2.2.1.272 | Tablepm20020maAlmclientSfpWarnDdmTable | not-accessible | current | List of pm20020maAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1 | Rowpm20020maAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm20020maAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.1 | Columnpm20020maAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm20020maAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.2 | Columnpm20020maAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.3 | Columnpm20020maAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.4 | Columnpm20020maAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.5 | Columnpm20020maAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.6 | Columnpm20020maAlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.7 | Columnpm20020maAlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.8 | Columnpm20020maAlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.9 | Columnpm20020maAlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.16 | Columnpm20020maAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.69.2.2.1.272.1.17 | Columnpm20020maAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.69.2.2.2 | Nodepm20020maAlmClientUrg | |||
| 1.3.6.1.4.1.20044.69.2.2.2.120 | Tablepm20020maAlmclientNetworkLaneFaultTable | not-accessible | current | List of pm20020maAlmclientNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1 | Rowpm20020maAlmclientNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm20020maAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.1 | Columnpm20020maAlmclientNetworkLaneFaultIndex | read-only | current | Index definition for the pm20020maAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.4 | Columnpm20020maAlmClientLaneRxFifoErrorPortn | read-only | current | Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Tr… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.5 | Columnpm20020maAlmClientLaneRxLolPortn | read-only | current | Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.6 | Columnpm20020maAlmClientLaneRxLosPortn | read-only | current | Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on t… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.8 | Columnpm20020maAlmClientLaneTxLolPortn | read-only | current | Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.9 | Columnpm20020maAlmClientLaneTxLosfPortn | read-only | current | Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.15 | Columnpm20020maAlmClientLaneApdPowerSupplyPortn | read-only | current | Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supp… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.16 | Columnpm20020maAlmClientLaneWavelengthUnlockedPortn | read-only | current | Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on t… |
| 1.3.6.1.4.1.20044.69.2.2.2.120.1.17 | Columnpm20020maAlmClientLaneTecFaultPortn | read-only | current | Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network … |
| 1.3.6.1.4.1.20044.69.2.2.2.152 | Tablepm20020maAlmclientHostLaneFaultTable | not-accessible | current | List of pm20020maAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1 | Rowpm20020maAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm20020maAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.1 | Columnpm20020maAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm20020maAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.2 | Columnpm20020maAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.3 | Columnpm20020maAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.4 | Columnpm20020maAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.5 | Columnpm20020maAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.6 | Columnpm20020maAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.7 | Columnpm20020maAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.10 | Columnpm20020maAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.69.2.2.2.152.1.11 | Columnpm20020maAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.69.2.2.2.240 | Tablepm20020maAlmclientSfpAlmDdmTable | not-accessible | current | List of pm20020maAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1 | Rowpm20020maAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm20020maAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.1 | Columnpm20020maAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm20020maAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.2 | Columnpm20020maAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.3 | Columnpm20020maAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.4 | Columnpm20020maAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.5 | Columnpm20020maAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.6 | Columnpm20020maAlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.7 | Columnpm20020maAlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.8 | Columnpm20020maAlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.9 | Columnpm20020maAlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.16 | Columnpm20020maAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.69.2.2.2.240.1.17 | Columnpm20020maAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.69.2.2.3 | Nodepm20020maAlmClientCrit | |||
| 1.3.6.1.4.1.20044.69.2.2.3.8 | Tablepm20020maAlmsynthAlmPortTable | not-accessible | current | List of pm20020maAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1 | Rowpm20020maAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm20020maAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.1 | Columnpm20020maAlmsynthAlmPortIndex | read-only | current | Index definition for the pm20020maAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.2 | Columnpm20020maAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.3 | Columnpm20020maAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.5 | Columnpm20020maAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.6 | Columnpm20020maAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.7 | Columnpm20020maAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.8 | Columnpm20020maAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.9 | Columnpm20020maAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.10 | Columnpm20020maAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.11 | Columnpm20020maAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.13 | Columnpm20020maAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.69.2.2.3.8.1.17 | Columnpm20020maAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.69.2.3 | Nodepm20020maAlmLine | |||
| 1.3.6.1.4.1.20044.69.2.3.1 | Nodepm20020maAlmLineNurg | |||
| 1.3.6.1.4.1.20044.69.2.3.1.184 | Tablepm20020maAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pm20020maAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1 | Rowpm20020maAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pm20020maAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.1 | Columnpm20020maAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pm20020maAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.2 | Columnpm20020maAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.3 | Columnpm20020maAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.4 | Columnpm20020maAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.5 | Columnpm20020maAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.6 | Columnpm20020maAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.7 | Columnpm20020maAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.8 | Columnpm20020maAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.9 | Columnpm20020maAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.10 | Columnpm20020maAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.11 | Columnpm20020maAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.12 | Columnpm20020maAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.13 | Columnpm20020maAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.14 | Columnpm20020maAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.15 | Columnpm20020maAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.16 | Columnpm20020maAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.69.2.3.1.184.1.17 | Columnpm20020maAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.69.2.3.1.188 | Tablepm20020maAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pm20020maAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1 | Rowpm20020maAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pm20020maAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.1 | Columnpm20020maAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pm20020maAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.2 | Columnpm20020maAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.3 | Columnpm20020maAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.4 | Columnpm20020maAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.5 | Columnpm20020maAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.6 | Columnpm20020maAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.7 | Columnpm20020maAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.8 | Columnpm20020maAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.9 | Columnpm20020maAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.10 | Columnpm20020maAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.11 | Columnpm20020maAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.12 | Columnpm20020maAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.13 | Columnpm20020maAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.14 | Columnpm20020maAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.15 | Columnpm20020maAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.16 | Columnpm20020maAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.69.2.3.1.188.1.17 | Columnpm20020maAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.69.2.3.2 | Nodepm20020maAlmLineUrg | |||
| 1.3.6.1.4.1.20044.69.2.3.2.192 | Tablepm20020maAlmlineNetworkLaneFaultTable | not-accessible | current | List of pm20020maAlmlineNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1 | Rowpm20020maAlmlineNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm20020maAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.1 | Columnpm20020maAlmlineNetworkLaneFaultIndex | read-only | current | Index definition for the pm20020maAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.3 | Columnpm20020maAlmLineLaneRxTecFaultPortn | read-only | current | Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Netwo… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.4 | Columnpm20020maAlmLineLaneRxFifoErrorPortn | read-only | current | Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Ne… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.5 | Columnpm20020maAlmLineLaneRxLolPortn | read-only | current | Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.6 | Columnpm20020maAlmLineLaneRxLosPortn | read-only | current | Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the L… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.8 | Columnpm20020maAlmLineLaneTxLolPortn | read-only | current | Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.9 | Columnpm20020maAlmLineLaneTxLosfPortn | read-only | current | Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.15 | Columnpm20020maAlmLineLaneApdPowerSupplyPortn | read-only | current | Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply f… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.16 | Columnpm20020maAlmLineLaneWavelengthUnlockedPortn | read-only | current | Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the L… |
| 1.3.6.1.4.1.20044.69.2.3.2.192.1.17 | Columnpm20020maAlmLineLaneTecFaultPortn | read-only | current | Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network … |
| 1.3.6.1.4.1.20044.69.2.3.2.196 | Tablepm20020maAlmlineHostLaneFaultTable | not-accessible | current | List of pm20020maAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1 | Rowpm20020maAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm20020maAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.1 | Columnpm20020maAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm20020maAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.2 | Columnpm20020maAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.3 | Columnpm20020maAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.4 | Columnpm20020maAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.5 | Columnpm20020maAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.6 | Columnpm20020maAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.7 | Columnpm20020maAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.10 | Columnpm20020maAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.69.2.3.2.196.1.11 | Columnpm20020maAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.69.2.3.2.200 | Tablepm20020maAlmlineNetworkLaneRxOtnTable | not-accessible | current | List of pm20020maAlmlineNetworkLaneRxOtn Article |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1 | Rowpm20020maAlmlineNetworkLaneRxOtnEntry | not-accessible | current | Row definition for the pm20020maAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.1 | Columnpm20020maAlmlineNetworkLaneRxOtnIndex | read-only | current | Index definition for the pm20020maAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.10 | Columnpm20020maAlmLineRxOtnOduAisPortn | read-only | current | Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.11 | Columnpm20020maAlmLineRxOtnOtuAisPortn | read-only | current | Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.12 | Columnpm20020maAlmLineRxSmBdiPortn | read-only | current | Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.13 | Columnpm20020maAlmLineRxOtnIaePortn | read-only | current | Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incomi… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.14 | Columnpm20020maAlmLineRxOtnOomPortn | read-only | current | Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multif… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.15 | Columnpm20020maAlmLineRxOtnLomPortn | read-only | current | Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multif… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.16 | Columnpm20020maAlmLineRxOtnOofPortn | read-only | current | Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is de… |
| 1.3.6.1.4.1.20044.69.2.3.2.200.1.17 | Columnpm20020maAlmLineRxOtnLofPortn | read-only | current | Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is de… |
| 1.3.6.1.4.1.20044.69.2.3.2.204 | Tablepm20020maAlmlineHostLaneTxOtnTable | not-accessible | current | List of pm20020maAlmlineHostLaneTxOtn Article |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1 | Rowpm20020maAlmlineHostLaneTxOtnEntry | not-accessible | current | Row definition for the pm20020maAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.1 | Columnpm20020maAlmlineHostLaneTxOtnIndex | read-only | current | Index definition for the pm20020maAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.10 | Columnpm20020maAlmLineTxOtnOduAisPortn | read-only | current | Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OD… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.11 | Columnpm20020maAlmLineTxOtnOtuAisPortn | read-only | current | Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OT… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.12 | Columnpm20020maAlmLineTxSmBdiPortn | read-only | current | Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM B… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.13 | Columnpm20020maAlmLineTxOtnIaePortn | read-only | current | Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Ali… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.14 | Columnpm20020maAlmLineTxOtnOomPortn | read-only | current | Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe i… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.15 | Columnpm20020maAlmLineTxOtnLomPortn | read-only | current | Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe i… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.16 | Columnpm20020maAlmLineTxOtnOofPortn | read-only | current | Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected… |
| 1.3.6.1.4.1.20044.69.2.3.2.204.1.17 | Columnpm20020maAlmLineTxOtnLofPortn | read-only | current | Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected… |
| 1.3.6.1.4.1.20044.69.2.3.3 | Nodepm20020maAlmLineCrit | |||
| 1.3.6.1.4.1.20044.69.2.3.3.40 | Tablepm20020maAlmsynthAlmLineTable | not-accessible | current | List of pm20020maAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1 | Rowpm20020maAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm20020maAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.1 | Columnpm20020maAlmsynthAlmLineIndex | read-only | current | Index definition for the pm20020maAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.2 | Columnpm20020maAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.3 | Columnpm20020maAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.5 | Columnpm20020maAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.6 | Columnpm20020maAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.7 | Columnpm20020maAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.9 | Columnpm20020maAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.10 | Columnpm20020maAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.11 | Columnpm20020maAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.13 | Columnpm20020maAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.69.2.3.3.40.1.17 | Columnpm20020maAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.69.3 | Nodepm20020mameasures | |||
| 1.3.6.1.4.1.20044.69.3.1 | Nodepm20020maMesrOther | |||
| 1.3.6.1.4.1.20044.69.3.1.0 | Scalarpm20020maMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.69.3.1.1 | Scalarpm20020maMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.69.3.1.7 | Scalarpm20020maMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.69.3.1.196 | Scalarpm20020maMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.69.3.1.197 | Scalarpm20020maMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.69.3.1.198 | Scalarpm20020maMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.69.3.1.199 | Scalarpm20020maMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.69.3.1.200 | Scalarpm20020maMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset <Help> This … |
| 1.3.6.1.4.1.20044.69.3.1.201 | Scalarpm20020maMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset <Help> This measure gives the avera… |
| 1.3.6.1.4.1.20044.69.3.1.202 | Scalarpm20020maMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset <Help> This measure gives the average Q Factor on the … |
| 1.3.6.1.4.1.20044.69.3.1.203 | Scalarpm20020maMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset <Help> This measure gi… |
| 1.3.6.1.4.1.20044.69.3.1.204 | Scalarpm20020maMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset <Help> This measure gives the average OSNR on the Line interfa… |
| 1.3.6.1.4.1.20044.69.3.1.208 | Scalarpm20020maMesrclientNetTxTempMin | read-only | current | Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.69.3.1.209 | Scalarpm20020maMesrclientNetTxBiasMin | read-only | current | Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.69.3.1.210 | Scalarpm20020maMesrclientNetTxPwrMin | read-only | current | Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.69.3.1.211 | Scalarpm20020maMesrclientNetRxPwrMin | read-only | current | Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.69.3.1.212 | Scalarpm20020maMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.69.3.1.213 | Scalarpm20020maMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.69.3.1.214 | Scalarpm20020maMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.69.3.1.215 | Scalarpm20020maMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.69.3.1.216 | Scalarpm20020maMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.69.3.1.217 | Scalarpm20020maMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.69.3.1.218 | Scalarpm20020maMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the minimum Q Factor … |
| 1.3.6.1.4.1.20044.69.3.1.219 | Scalarpm20020maMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.69.3.1.220 | Scalarpm20020maMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the minimum OS… |
| 1.3.6.1.4.1.20044.69.3.1.224 | Scalarpm20020maMesrclientNetTxTempMax | read-only | current | Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.69.3.1.225 | Scalarpm20020maMesrclientNetTxBiasMax | read-only | current | Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.69.3.1.226 | Scalarpm20020maMesrclientNetTxPwrMax | read-only | current | Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.69.3.1.227 | Scalarpm20020maMesrclientNetRxPwrMax | read-only | current | Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.69.3.1.228 | Scalarpm20020maMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.69.3.1.229 | Scalarpm20020maMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.69.3.1.230 | Scalarpm20020maMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.69.3.1.231 | Scalarpm20020maMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.69.3.1.232 | Scalarpm20020maMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.69.3.1.233 | Scalarpm20020maMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.69.3.1.234 | Scalarpm20020maMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the maximum Q Factor … |
| 1.3.6.1.4.1.20044.69.3.1.235 | Scalarpm20020maMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.69.3.1.236 | Scalarpm20020maMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB) <Help> This measure gives the maximum O… |
| 1.3.6.1.4.1.20044.69.3.2 | Nodepm20020maMesrClient | |||
| 1.3.6.1.4.1.20044.69.3.2.8 | Scalarpm20020maMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.69.3.2.9 | Scalarpm20020maMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Un… |
| 1.3.6.1.4.1.20044.69.3.2.10 | Scalarpm20020maMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = m… |
| 1.3.6.1.4.1.20044.69.3.2.16 | Tablepm20020maMesrclientNetTxTempTable | not-accessible | current | List of pm20020maMesrclientNetTxTemp Article |
| 1.3.6.1.4.1.20044.69.3.2.16.1 | Rowpm20020maMesrclientNetTxTempEntry | not-accessible | current | Row definition for the pm20020maMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.69.3.2.16.1.1 | Columnpm20020maMesrclientNetTxTempIndex | read-only | current | Index definition for the pm20020maMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.69.3.2.16.1.2 | Columnpm20020maMesrclientNetTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.69.3.2.48 | Tablepm20020maMesrclientNetTxBiasTable | not-accessible | current | List of pm20020maMesrclientNetTxBias Article |
| 1.3.6.1.4.1.20044.69.3.2.48.1 | Rowpm20020maMesrclientNetTxBiasEntry | not-accessible | current | Row definition for the pm20020maMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.69.3.2.48.1.1 | Columnpm20020maMesrclientNetTxBiasIndex | read-only | current | Index definition for the pm20020maMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.69.3.2.48.1.2 | Columnpm20020maMesrclientNetTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit… |
| 1.3.6.1.4.1.20044.69.3.2.80 | Tablepm20020maMesrclientNetTxPwrTable | not-accessible | current | List of pm20020maMesrclientNetTxPwr Article |
| 1.3.6.1.4.1.20044.69.3.2.80.1 | Rowpm20020maMesrclientNetTxPwrEntry | not-accessible | current | Row definition for the pm20020maMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.69.3.2.80.1.1 | Columnpm20020maMesrclientNetTxPwrIndex | read-only | current | Index definition for the pm20020maMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.69.3.2.80.1.2 | Columnpm20020maMesrclientNetTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)… |
| 1.3.6.1.4.1.20044.69.3.2.112 | Tablepm20020maMesrclientNetRxPwrTable | not-accessible | current | List of pm20020maMesrclientNetRxPwr Article |
| 1.3.6.1.4.1.20044.69.3.2.112.1 | Rowpm20020maMesrclientNetRxPwrEntry | not-accessible | current | Row definition for the pm20020maMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.69.3.2.112.1.1 | Columnpm20020maMesrclientNetRxPwrIndex | read-only | current | Index definition for the pm20020maMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.69.3.2.112.1.2 | Columnpm20020maMesrclientNetRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40… |
| 1.3.6.1.4.1.20044.69.3.3 | Nodepm20020maMesrLine | |||
| 1.3.6.1.4.1.20044.69.3.3.12 | Scalarpm20020maMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) … |
| 1.3.6.1.4.1.20044.69.3.3.13 | Scalarpm20020maMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit =… |
| 1.3.6.1.4.1.20044.69.3.3.14 | Scalarpm20020maMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <H… |
| 1.3.6.1.4.1.20044.69.3.3.144 | Tablepm20020maMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of pm20020maMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.69.3.3.144.1 | Rowpm20020maMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the pm20020maMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.69.3.3.144.1.1 | Columnpm20020maMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the pm20020maMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.69.3.3.144.1.2 | Columnpm20020maMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.69.3.3.148 | Tablepm20020maMesrlineNetTxLaserTempTable | not-accessible | current | List of pm20020maMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.69.3.3.148.1 | Rowpm20020maMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the pm20020maMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.69.3.3.148.1.1 | Columnpm20020maMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the pm20020maMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.69.3.3.148.1.2 | Columnpm20020maMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.69.3.3.152 | Tablepm20020maMesrlineNetTxBiasCurrentTable | not-accessible | current | List of pm20020maMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.69.3.3.152.1 | Rowpm20020maMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the pm20020maMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.69.3.3.152.1.1 | Columnpm20020maMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the pm20020maMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.69.3.3.152.1.2 | Columnpm20020maMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.69.3.3.156 | Tablepm20020maMesrlineNetRxInputPwrTable | not-accessible | current | List of pm20020maMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.69.3.3.156.1 | Rowpm20020maMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the pm20020maMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.69.3.3.156.1.1 | Columnpm20020maMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the pm20020maMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.69.3.3.156.1.2 | Columnpm20020maMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (… |
| 1.3.6.1.4.1.20044.69.3.3.160 | Tablepm20020maMesrlineResidualChromaticDispTable | not-accessible | current | List of pm20020maMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.69.3.3.160.1 | Rowpm20020maMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the pm20020maMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.69.3.3.160.1.1 | Columnpm20020maMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the pm20020maMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.69.3.3.160.1.2 | Columnpm20020maMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.69.3.3.164 | Tablepm20020maMesrlineDiffGroupDelayTable | not-accessible | current | List of pm20020maMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.69.3.3.164.1 | Rowpm20020maMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the pm20020maMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.69.3.3.164.1.1 | Columnpm20020maMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the pm20020maMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.69.3.3.164.1.2 | Columnpm20020maMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Di… |
| 1.3.6.1.4.1.20044.69.3.3.168 | Tablepm20020maMesrlineQFactorTable | not-accessible | current | List of pm20020maMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.69.3.3.168.1 | Rowpm20020maMesrlineQFactorEntry | not-accessible | current | Row definition for the pm20020maMesrlineQFactor table |
| 1.3.6.1.4.1.20044.69.3.3.168.1.1 | Columnpm20020maMesrlineQFactorIndex | read-only | current | Index definition for the pm20020maMesrlineQFactor table |
| 1.3.6.1.4.1.20044.69.3.3.168.1.2 | Columnpm20020maMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
| 1.3.6.1.4.1.20044.69.3.3.172 | Tablepm20020maMesrlineCarrierFreqOffsetTable | not-accessible | current | List of pm20020maMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.69.3.3.172.1 | Rowpm20020maMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the pm20020maMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.69.3.3.172.1.1 | Columnpm20020maMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the pm20020maMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.69.3.3.172.1.2 | Columnpm20020maMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current C… |
| 1.3.6.1.4.1.20044.69.3.3.176 | Tablepm20020maMesrlineOsnrTable | not-accessible | current | List of pm20020maMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.69.3.3.176.1 | Rowpm20020maMesrlineOsnrEntry | not-accessible | current | Row definition for the pm20020maMesrlineOsnr table |
| 1.3.6.1.4.1.20044.69.3.3.176.1.1 | Columnpm20020maMesrlineOsnrIndex | read-only | current | Index definition for the pm20020maMesrlineOsnr table |
| 1.3.6.1.4.1.20044.69.3.3.176.1.2 | Columnpm20020maMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
| 1.3.6.1.4.1.20044.69.4 | Nodepm20020macounters | |||
| 1.3.6.1.4.1.20044.69.4.1 | Nodepm20020maCntOther | |||
| 1.3.6.1.4.1.20044.69.4.2 | Nodepm20020maCntClient | |||
| 1.3.6.1.4.1.20044.69.4.2.112 | Tablepm20020maCntclientInputErrorCounterTable | not-accessible | current | List of pm20020maCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.69.4.2.112.1 | Rowpm20020maCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm20020maCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.2.112.1.1 | Columnpm20020maCntclientInputErrorCounterIndex | read-only | current | Index definition for the pm20020maCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.2.112.1.2 | Columnpm20020maCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.69.4.2.112.1.3 | Columnpm20020maCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.2.112.1.4 | Columnpm20020maCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.2.144 | Tablepm20020maCntclientCbipCounterTable | not-accessible | current | List of pm20020maCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.69.4.2.144.1 | Rowpm20020maCntclientCbipCounterEntry | not-accessible | current | Row definition for the pm20020maCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.69.4.2.144.1.1 | Columnpm20020maCntclientCbipCounterIndex | read-only | current | Index definition for the pm20020maCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.69.4.2.144.1.2 | Columnpm20020maCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.69.4.2.144.1.3 | Columnpm20020maCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.2.144.1.4 | Columnpm20020maCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.3 | Nodepm20020maCntLine | |||
| 1.3.6.1.4.1.20044.69.4.3.192 | Tablepm20020maCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm20020maCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.192.1 | Rowpm20020maCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm20020maCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.192.1.1 | Columnpm20020maCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm20020maCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.192.1.2 | Columnpm20020maCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (r… |
| 1.3.6.1.4.1.20044.69.4.3.192.1.3 | Columnpm20020maCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.3.192.1.4 | Columnpm20020maCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.3.193 | Tablepm20020maCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm20020maCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.193.1 | Rowpm20020maCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm20020maCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.69.4.3.193.1.1 | Columnpm20020maCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm20020maCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.69.4.3.193.1.2 | Columnpm20020maCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.69.4.3.193.1.3 | Columnpm20020maCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.69.4.3.193.1.4 | Columnpm20020maCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.69.4.3.194 | Tablepm20020maCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm20020maCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.194.1 | Rowpm20020maCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm20020maCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.194.1.1 | Columnpm20020maCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm20020maCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.194.1.2 | Columnpm20020maCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.69.4.3.194.1.3 | Columnpm20020maCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.69.4.3.194.1.4 | Columnpm20020maCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.69.4.3.195 | Tablepm20020maCntlineDfrmTimCntTable | not-accessible | current | List of pm20020maCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.69.4.3.195.1 | Rowpm20020maCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm20020maCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.69.4.3.195.1.1 | Columnpm20020maCntlineDfrmTimCntIndex | read-only | current | Index definition for the pm20020maCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.69.4.3.195.1.2 | Columnpm20020maCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.69.4.3.195.1.3 | Columnpm20020maCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.3.195.1.4 | Columnpm20020maCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.3.196 | Tablepm20020maCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of pm20020maCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.196.1 | Rowpm20020maCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm20020maCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.196.1.1 | Columnpm20020maCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the pm20020maCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.196.1.2 | Columnpm20020maCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre-SD FEC Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft … |
| 1.3.6.1.4.1.20044.69.4.3.196.1.3 | Columnpm20020maCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.3.196.1.4 | Columnpm20020maCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.3.197 | Tablepm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.197.1 | Rowpm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.197.1.1 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.69.4.3.197.1.2 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat… |
| 1.3.6.1.4.1.20044.69.4.3.197.1.3 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.3.197.1.4 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.3.198 | Tablepm20020maCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of pm20020maCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.198.1 | Rowpm20020maCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the pm20020maCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.69.4.3.198.1.1 | Columnpm20020maCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the pm20020maCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.69.4.3.198.1.2 | Columnpm20020maCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.69.4.3.198.1.3 | Columnpm20020maCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.3.198.1.4 | Columnpm20020maCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.69.4.3.199 | Tablepm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.69.4.3.199.1 | Rowpm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.69.4.3.199.1.1 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the pm20020maCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.69.4.3.199.1.2 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.69.4.3.199.1.3 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.69.4.3.199.1.4 | Columnpm20020maCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.69.6 | Nodepm20020macontrolsWrite | |||
| 1.3.6.1.4.1.20044.69.6.1 | Nodepm20020maCtrlOther | |||
| 1.3.6.1.4.1.20044.69.6.1.1 | Nodepm20020maCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.69.6.1.1.1 | Scalarpm20020maCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.69.6.1.1.2 | Scalarpm20020maCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.69.6.1.1.10 | Scalarpm20020maCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.69.6.1.1.14 | Scalarpm20020maCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.69.6.1.4 | Nodepm20020maCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.69.6.1.4.1 | Scalarpm20020maCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.69.6.1.4.2 | Scalarpm20020maCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.69.6.1.5 | Nodepm20020maCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.69.6.1.5.2 | Scalarpm20020maCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.69.6.1.5.3 | Scalarpm20020maCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.69.6.1.5.5 | Scalarpm20020maCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.69.6.1.5.6 | Scalarpm20020maCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.69.6.1.6 | Nodepm20020maCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.69.6.1.6.1 | Scalarpm20020maCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.69.6.1.6.5 | Scalarpm20020maCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.69.6.1.6.6 | Scalarpm20020maCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.69.6.1.6.7 | Scalarpm20020maCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.69.6.1.6.8 | Scalarpm20020maCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.69.6.1.192 | Nodepm20020maCtrlledTest | |||
| 1.3.6.1.4.1.20044.69.6.1.192.1 | Scalarpm20020maCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.69.6.1.192.2 | Scalarpm20020maCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.69.6.1.192.3 | Scalarpm20020maCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.69.6.1.201 | Nodepm20020maCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.69.6.1.201.1 | Scalarpm20020maCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.69.6.1.259 | Nodepm20020maCtrlresetCount | |||
| 1.3.6.1.4.1.20044.69.6.1.259.1 | Scalarpm20020maCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.69.6.1.260 | Nodepm20020maCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.69.6.1.260.1 | Scalarpm20020maCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.69.6.1.261 | Nodepm20020maCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.69.6.1.261.1 | Scalarpm20020maCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.69.6.2 | Nodepm20020maCtrlClient | |||
| 1.3.6.1.4.1.20044.69.6.2.16 | Tablepm20020maCtrlaccessLoopTable | not-accessible | current | List of pm20020maCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.69.6.2.16.1 | Rowpm20020maCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm20020maCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.69.6.2.16.1.1 | Columnpm20020maCtrlaccessLoopIndex | read-only | current | Index definition for the pm20020maCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.69.6.2.16.1.2 | Columnpm20020maCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.69.6.2.17 | Tablepm20020maCtrlclientLoopToLineTable | not-accessible | current | List of pm20020maCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.69.6.2.17.1 | Rowpm20020maCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm20020maCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.69.6.2.17.1.1 | Columnpm20020maCtrlclientLoopToLineIndex | read-only | current | Index definition for the pm20020maCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.69.6.2.17.1.2 | Columnpm20020maCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.69.6.2.21 | Tablepm20020maCtrlcsfUpInsTable | not-accessible | current | List of pm20020maCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.69.6.2.21.1 | Rowpm20020maCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm20020maCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.69.6.2.21.1.1 | Columnpm20020maCtrlcsfUpInsIndex | read-only | current | Index definition for the pm20020maCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.69.6.2.21.1.2 | Columnpm20020maCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.69.6.2.22 | Tablepm20020maCtrlcaisDwInsTable | not-accessible | current | List of pm20020maCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.69.6.2.22.1 | Rowpm20020maCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm20020maCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.69.6.2.22.1.1 | Columnpm20020maCtrlcaisDwInsIndex | read-only | current | Index definition for the pm20020maCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.69.6.2.22.1.2 | Columnpm20020maCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.69.6.2.262 | Tablepm20020maCtrlclientResetAllCountTable | not-accessible | current | List of pm20020maCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.69.6.2.262.1 | Rowpm20020maCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm20020maCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.69.6.2.262.1.1 | Columnpm20020maCtrlclientResetAllCountIndex | read-only | current | Index definition for the pm20020maCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.69.6.2.262.1.2 | Columnpm20020maCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.69.6.3 | Nodepm20020maCtrlLine | |||
| 1.3.6.1.4.1.20044.69.6.3.64 | Tablepm20020maCtrlcommAccessLoopTable | not-accessible | current | List of pm20020maCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.69.6.3.64.1 | Rowpm20020maCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm20020maCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.69.6.3.64.1.1 | Columnpm20020maCtrlcommAccessLoopIndex | read-only | current | Index definition for the pm20020maCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.69.6.3.64.1.2 | Columnpm20020maCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.69.6.3.66 | Tablepm20020maCtrllineLoopTable | not-accessible | current | List of pm20020maCtrllineLoop Article |
| 1.3.6.1.4.1.20044.69.6.3.66.1 | Rowpm20020maCtrllineLoopEntry | not-accessible | current | Row definition for the pm20020maCtrllineLoop table |
| 1.3.6.1.4.1.20044.69.6.3.66.1.1 | Columnpm20020maCtrllineLoopIndex | read-only | current | Index definition for the pm20020maCtrllineLoop table |
| 1.3.6.1.4.1.20044.69.6.3.66.1.2 | Columnpm20020maCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.69.6.3.69 | Tablepm20020maCtrlfecDisableTable | not-accessible | current | List of pm20020maCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.69.6.3.69.1 | Rowpm20020maCtrlfecDisableEntry | not-accessible | current | Row definition for the pm20020maCtrlfecDisable table |
| 1.3.6.1.4.1.20044.69.6.3.69.1.1 | Columnpm20020maCtrlfecDisableIndex | read-only | current | Index definition for the pm20020maCtrlfecDisable table |
| 1.3.6.1.4.1.20044.69.6.3.69.1.2 | Columnpm20020maCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.69.6.3.209 | Tablepm20020maCtrlmsaLineLoopTable | not-accessible | current | List of pm20020maCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.69.6.3.209.1 | Rowpm20020maCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pm20020maCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.69.6.3.209.1.1 | Columnpm20020maCtrlmsaLineLoopIndex | read-only | current | Index definition for the pm20020maCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.69.6.3.209.1.2 | Columnpm20020maCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.69.6.3.210 | Tablepm20020maCtrlmsaTxResetTable | not-accessible | current | List of pm20020maCtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.69.6.3.210.1 | Rowpm20020maCtrlmsaTxResetEntry | not-accessible | current | Row definition for the pm20020maCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.69.6.3.210.1.1 | Columnpm20020maCtrlmsaTxResetIndex | read-only | current | Index definition for the pm20020maCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.69.6.3.210.1.2 | Columnpm20020maCtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.69.6.3.211 | Tablepm20020maCtrlmsaRxResetTable | not-accessible | current | List of pm20020maCtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.69.6.3.211.1 | Rowpm20020maCtrlmsaRxResetEntry | not-accessible | current | Row definition for the pm20020maCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.69.6.3.211.1.1 | Columnpm20020maCtrlmsaRxResetIndex | read-only | current | Index definition for the pm20020maCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.69.6.3.211.1.2 | Columnpm20020maCtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.69.6.3.212 | Tablepm20020maCtrlmsaShutdownTable | not-accessible | current | List of pm20020maCtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.69.6.3.212.1 | Rowpm20020maCtrlmsaShutdownEntry | not-accessible | current | Row definition for the pm20020maCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.69.6.3.212.1.1 | Columnpm20020maCtrlmsaShutdownIndex | read-only | current | Index definition for the pm20020maCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.69.6.3.212.1.2 | Columnpm20020maCtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.69.6.3.263 | Tablepm20020maCtrllineResetAllCountTable | not-accessible | current | List of pm20020maCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.69.6.3.263.1 | Rowpm20020maCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm20020maCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.69.6.3.263.1.1 | Columnpm20020maCtrllineResetAllCountIndex | read-only | current | Index definition for the pm20020maCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.69.6.3.263.1.2 | Columnpm20020maCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.69.7 | Nodepm20020mari | |||
| 1.3.6.1.4.1.20044.69.7.1 | Nodepm20020mariTable | |||
| 1.3.6.1.4.1.20044.69.7.1.1 | Tablepm20020maRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.69.7.1.1.1 | Rowpm20020maRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.69.7.1.1.1.1 | Columnpm20020maRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.69.7.1.1.1.2 | Columnpm20020maRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.69.7.1.2 | Tablepm20020maRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.69.7.1.2.1 | Rowpm20020maRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.69.7.1.2.1.1 | Columnpm20020maRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.69.7.1.2.1.2 | Columnpm20020maRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.69.7.2 | Scalarpm20020maRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.69.7.3 | Scalarpm20020maRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.69.7.4 | Scalarpm20020maRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.69.7.5 | Scalarpm20020maRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.69.7.6 | Scalarpm20020maRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.69.8 | Nodepm20020madownload | |||
| 1.3.6.1.4.1.20044.69.8.1 | Nodepm20020maDwlOther | |||
| 1.3.6.1.4.1.20044.69.8.1.0 | Nodepm20020maDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.69.8.1.0.1 | Scalarpm20020maDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.69.8.1.0.2 | Scalarpm20020maDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.69.8.1.1 | Nodepm20020maDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.69.8.1.1.1 | Scalarpm20020maDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.69.8.1.1.2 | Scalarpm20020maDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.69.8.1.1.5 | Scalarpm20020maDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.69.8.1.1.6 | Scalarpm20020maDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.69.8.1.2 | Nodepm20020maDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.69.8.1.2.1 | Scalarpm20020maDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.69.8.1.2.2 | Scalarpm20020maDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.69.8.1.2.3 | Scalarpm20020maDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.69.8.1.2.4 | Scalarpm20020maDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.69.8.1.2.5 | Scalarpm20020maDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.69.8.1.2.6 | Scalarpm20020maDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.69.8.1.2.7 | Scalarpm20020maDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.69.8.1.2.8 | Scalarpm20020maDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.69.8.2 | Nodepm20020maDwlClient | |||
| 1.3.6.1.4.1.20044.69.8.3 | Nodepm20020maDwlLine | |||
| 1.3.6.1.4.1.20044.69.9 | Nodepm20020maConfig | |||
| 1.3.6.1.4.1.20044.69.9.1 | Nodepm20020maCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.69.9.1.1 | Tablepm20020maCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.1.1.1 | Rowpm20020maCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.69.9.1.1.1.1 | Columnpm20020maCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.69.9.1.1.1.3 | Columnpm20020maCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.69.9.2 | Nodepm20020maCfgStartup | |||
| 1.3.6.1.4.1.20044.69.9.2.1 | Tablepm20020maCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.2.1.1 | Rowpm20020maCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.69.9.2.1.1.1 | Columnpm20020maCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.69.9.2.1.1.3 | Columnpm20020maCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.69.9.2.1.1.4 | Columnpm20020maCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.69.9.2.1.1.14 | Columnpm20020maCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.69.9.2.2 | Tablepm20020maCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.2.2.1 | Rowpm20020maCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.69.9.2.2.1.1 | Columnpm20020maCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.69.9.2.2.1.3 | Columnpm20020maCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.69.9.2.2.1.14 | Columnpm20020maCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.69.9.2.3 | Tablepm20020maCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.2.3.1 | Rowpm20020maCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.69.9.2.3.1.1 | Columnpm20020maCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.69.9.2.3.1.3 | Columnpm20020maCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.69.9.3 | Nodepm20020maCfgLabels | |||
| 1.3.6.1.4.1.20044.69.9.3.1 | Tablepm20020maCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.3.1.1 | Rowpm20020maCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.69.9.3.1.1.1 | Columnpm20020maCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.69.9.3.1.1.3 | Columnpm20020maCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.69.9.3.2 | Tablepm20020maCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.3.2.1 | Rowpm20020maCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.69.9.3.2.1.1 | Columnpm20020maCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.69.9.3.2.1.3 | Columnpm20020maCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.69.9.4 | Nodepm20020maCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.69.9.4.1 | Tablepm20020maCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.4.1.1 | Rowpm20020maCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.69.9.4.1.1.1 | Columnpm20020maCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.69.9.4.1.1.6 | Columnpm20020maCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.69.9.4.1.1.7 | Columnpm20020maCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.69.9.4.1.1.8 | Columnpm20020maCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.69.9.4.1.1.9 | Columnpm20020maCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.69.9.4.1.1.10 | Columnpm20020maCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.69.9.5 | Nodepm20020maCfgOther | |||
| 1.3.6.1.4.1.20044.69.9.5.1 | Nodepm20020matablemoduleOther | |||
| 1.3.6.1.4.1.20044.69.9.5.1.2 | Scalarpm20020maCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.69.9.5.1.3 | Scalarpm20020maCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.69.9.5.1.4 | Scalarpm20020maCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.69.9.6 | Nodepm20020maCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.69.9.6.1 | Tablepm20020maCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.69.9.6.1.1 | Rowpm20020maCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.69.9.6.1.1.1 | Columnpm20020maCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.69.9.6.1.1.3 | Columnpm20020maCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.69.9.6.1.1.4 | Columnpm20020maCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.69.9.6.1.1.5 | Columnpm20020maCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.69.9.6.1.1.6 | Columnpm20020maCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.69.9.6.1.1.7 | Columnpm20020maCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.69.9.257 | Scalarpm20020maCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.69.10 | Nodepm20020matraps | |||
| 1.3.6.1.4.1.20044.69.10.2 | Scalarpm20020matrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.69.10.3 | Scalarpm20020matrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.69.10.4 | Scalarpm20020matrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.69.10.30 | Notificationpm20020maLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.69.10.31 | Notificationpm20020maLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.69.10.32 | Notificationpm20020maLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.69.10.33 | Notificationpm20020maLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.69.10.34 | Notificationpm20020maLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.69.10.35 | Notificationpm20020maLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.69.10.40 | Notificationpm20020maClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.69.10.41 | Notificationpm20020maClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.69.10.42 | Notificationpm20020maClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.69.10.43 | Notificationpm20020maClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.69.10.44 | Notificationpm20020maClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.69.10.45 | Notificationpm20020maClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.69.10.50 | Notificationpm20020maPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.69.10.51 | Notificationpm20020maPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.69.11 | Nodepm20020maMonitoring | |||
| 1.3.6.1.4.1.20044.69.11.1 | Nodepm20020maMonOther | |||
| 1.3.6.1.4.1.20044.69.11.1.3 | Nodepm20020maMonRmon | |||
| 1.3.6.1.4.1.20044.69.11.2 | Nodepm20020maMonClient | |||
| 1.3.6.1.4.1.20044.69.11.2.4 | Nodepm20020maMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.69.11.2.4.16 | Tablepm20020maMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.16.1 | Rowpm20020maMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.16.1.1 | Columnpm20020maMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.16.1.2 | Columnpm20020maMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.69.11.2.4.16.1.3 | Columnpm20020maMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.16.1.4 | Columnpm20020maMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.48 | Tablepm20020maMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.48.1 | Rowpm20020maMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.48.1.1 | Columnpm20020maMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.48.1.2 | Columnpm20020maMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.69.11.2.4.48.1.3 | Columnpm20020maMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.48.1.4 | Columnpm20020maMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.80 | Tablepm20020maMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.80.1 | Rowpm20020maMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.80.1.1 | Columnpm20020maMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.80.1.2 | Columnpm20020maMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.69.11.2.4.80.1.3 | Columnpm20020maMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.80.1.4 | Columnpm20020maMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.112 | Tablepm20020maMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.112.1 | Rowpm20020maMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.112.1.1 | Columnpm20020maMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.112.1.2 | Columnpm20020maMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.69.11.2.4.112.1.3 | Columnpm20020maMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.112.1.4 | Columnpm20020maMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.144 | Tablepm20020maMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.144.1 | Rowpm20020maMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.144.1.1 | Columnpm20020maMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.144.1.2 | Columnpm20020maMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.69.11.2.4.144.1.3 | Columnpm20020maMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.144.1.4 | Columnpm20020maMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.176 | Tablepm20020maMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.176.1 | Rowpm20020maMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.176.1.1 | Columnpm20020maMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.176.1.2 | Columnpm20020maMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.69.11.2.4.176.1.3 | Columnpm20020maMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.176.1.4 | Columnpm20020maMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.304 | Tablepm20020maMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.304.1 | Rowpm20020maMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.304.1.1 | Columnpm20020maMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.304.1.2 | Columnpm20020maMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.69.11.2.4.304.1.3 | Columnpm20020maMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.304.1.4 | Columnpm20020maMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.336 | Tablepm20020maMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pm20020maMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.336.1 | Rowpm20020maMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pm20020maMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.336.1.1 | Columnpm20020maMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pm20020maMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.69.11.2.4.336.1.2 | Columnpm20020maMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.69.11.2.4.336.1.3 | Columnpm20020maMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.336.1.4 | Columnpm20020maMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.400 | Tablepm20020maMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.400.1 | Rowpm20020maMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.400.1.1 | Columnpm20020maMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.400.1.2 | Columnpm20020maMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.69.11.2.4.400.1.3 | Columnpm20020maMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.400.1.4 | Columnpm20020maMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.432 | Tablepm20020maMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.432.1 | Rowpm20020maMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.432.1.1 | Columnpm20020maMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.432.1.2 | Columnpm20020maMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.69.11.2.4.432.1.3 | Columnpm20020maMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.432.1.4 | Columnpm20020maMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.464 | Tablepm20020maMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.464.1 | Rowpm20020maMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.464.1.1 | Columnpm20020maMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.464.1.2 | Columnpm20020maMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.69.11.2.4.464.1.3 | Columnpm20020maMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.464.1.4 | Columnpm20020maMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.496 | Tablepm20020maMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.496.1 | Rowpm20020maMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.496.1.1 | Columnpm20020maMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.496.1.2 | Columnpm20020maMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.69.11.2.4.496.1.3 | Columnpm20020maMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.496.1.4 | Columnpm20020maMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.528 | Tablepm20020maMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.528.1 | Rowpm20020maMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.528.1.1 | Columnpm20020maMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.528.1.2 | Columnpm20020maMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.69.11.2.4.528.1.3 | Columnpm20020maMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.528.1.4 | Columnpm20020maMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.560 | Tablepm20020maMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.560.1 | Rowpm20020maMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.560.1.1 | Columnpm20020maMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.560.1.2 | Columnpm20020maMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.69.11.2.4.560.1.3 | Columnpm20020maMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.560.1.4 | Columnpm20020maMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.688 | Tablepm20020maMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.688.1 | Rowpm20020maMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.688.1.1 | Columnpm20020maMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.688.1.2 | Columnpm20020maMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.69.11.2.4.688.1.3 | Columnpm20020maMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.688.1.4 | Columnpm20020maMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.720 | Tablepm20020maMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pm20020maMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.69.11.2.4.720.1 | Rowpm20020maMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm20020maMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.720.1.1 | Columnpm20020maMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pm20020maMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.69.11.2.4.720.1.2 | Columnpm20020maMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.69.11.2.4.720.1.3 | Columnpm20020maMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.69.11.2.4.720.1.4 | Columnpm20020maMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.69.11.5 | Nodepm20020maMonPerfOther | |||
| 1.3.6.1.4.1.20044.69.11.5.1 | Nodepm20020maMonPerfSync | |||
| 1.3.6.1.4.1.20044.69.11.5.1.257 | Scalarpm20020maPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.69.11.5.1.259 | Scalarpm20020maPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.69.11.5.1.260 | Scalarpm20020maPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.69.11.5.2 | Nodepm20020maMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.69.11.5.2.1 | Scalarpm20020maPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.69.11.5.2.2 | Scalarpm20020maPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.69.11.5.2.5 | Scalarpm20020maPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.69.11.5.2.6 | Scalarpm20020maPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.69.11.5.2.7 | Scalarpm20020maPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.69.11.5.2.8 | Scalarpm20020maPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.69.11.6 | Nodepm20020maMonPerfClient | |||
| 1.3.6.1.4.1.20044.69.11.6.16 | Tablepm20020maPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pm20020maPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.69.11.6.16.1 | Rowpm20020maPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.6.16.1.1 | Columnpm20020maPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.6.16.1.2 | Columnpm20020maPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.16.1.3 | Columnpm20020maPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.16.1.4 | Columnpm20020maPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.16.1.5 | Columnpm20020maPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.16.1.6 | Columnpm20020maPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.16.1.7 | Columnpm20020maPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.16.1.8 | Columnpm20020maPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.16.1.9 | Columnpm20020maPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.16.1.10 | Columnpm20020maPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.16.1.11 | Columnpm20020maPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.48 | Tablepm20020maPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.6.48.1 | Rowpm20020maPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.48.1.1 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.48.1.2 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.48.1.3 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.48.1.4 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.48.1.5 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.48.1.6 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.48.1.7 | Columnpm20020maPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.48.1.8 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.48.1.9 | Columnpm20020maPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.48.1.10 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.48.1.11 | Columnpm20020maPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.80 | Tablepm20020maPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pm20020maPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.69.11.6.80.1 | Rowpm20020maPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.6.80.1.1 | Columnpm20020maPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.6.80.1.2 | Columnpm20020maPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.80.1.3 | Columnpm20020maPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.80.1.4 | Columnpm20020maPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.80.1.5 | Columnpm20020maPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.80.1.6 | Columnpm20020maPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.80.1.7 | Columnpm20020maPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.80.1.8 | Columnpm20020maPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.80.1.9 | Columnpm20020maPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.80.1.10 | Columnpm20020maPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.80.1.11 | Columnpm20020maPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.112 | Tablepm20020maPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.6.112.1 | Rowpm20020maPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.112.1.1 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.112.1.2 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.112.1.3 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.112.1.4 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.112.1.5 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.112.1.6 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.112.1.7 | Columnpm20020maPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.112.1.8 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.112.1.9 | Columnpm20020maPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.112.1.10 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.112.1.11 | Columnpm20020maPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.144 | Tablepm20020maPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pm20020maPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.69.11.6.144.1 | Rowpm20020maPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.6.144.1.1 | Columnpm20020maPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.6.144.1.2 | Columnpm20020maPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.144.1.3 | Columnpm20020maPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.144.1.4 | Columnpm20020maPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.144.1.5 | Columnpm20020maPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.144.1.6 | Columnpm20020maPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.144.1.7 | Columnpm20020maPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.144.1.8 | Columnpm20020maPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.144.1.9 | Columnpm20020maPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.144.1.10 | Columnpm20020maPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.144.1.11 | Columnpm20020maPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.176 | Tablepm20020maPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.6.176.1 | Rowpm20020maPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.176.1.1 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.176.1.2 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.176.1.3 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.176.1.4 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.176.1.5 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.176.1.6 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.176.1.7 | Columnpm20020maPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.176.1.8 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.176.1.9 | Columnpm20020maPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.176.1.10 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.176.1.11 | Columnpm20020maPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.208 | Tablepm20020maPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pm20020maPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.69.11.6.208.1 | Rowpm20020maPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.6.208.1.1 | Columnpm20020maPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.6.208.1.2 | Columnpm20020maPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.208.1.3 | Columnpm20020maPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.208.1.4 | Columnpm20020maPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.208.1.5 | Columnpm20020maPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.208.1.6 | Columnpm20020maPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.208.1.7 | Columnpm20020maPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.208.1.8 | Columnpm20020maPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.208.1.9 | Columnpm20020maPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.208.1.10 | Columnpm20020maPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.208.1.11 | Columnpm20020maPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.240 | Tablepm20020maPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.6.240.1 | Rowpm20020maPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.240.1.1 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.240.1.2 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.240.1.3 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.6.240.1.4 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.240.1.5 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.240.1.6 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.240.1.7 | Columnpm20020maPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.240.1.8 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.240.1.9 | Columnpm20020maPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.240.1.10 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.240.1.11 | Columnpm20020maPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.6.848 | Tablepm20020maPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm20020maPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.69.11.6.848.1 | Rowpm20020maPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm20020maPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.6.848.1.1 | Columnpm20020maPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm20020maPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.6.848.1.4 | Columnpm20020maperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.848.1.5 | Columnpm20020maperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.848.1.6 | Columnpm20020maperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.848.1.7 | Columnpm20020maperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.69.11.6.848.1.28 | Columnpm20020maperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.848.1.29 | Columnpm20020maperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.848.1.30 | Columnpm20020maperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.848.1.31 | Columnpm20020maperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.69.11.6.880 | Tablepm20020maPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.6.880.1 | Rowpm20020maPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.880.1.1 | Columnpm20020maPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.880.1.4 | Columnpm20020maperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.880.1.5 | Columnpm20020maperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.880.1.6 | Columnpm20020maperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.880.1.7 | Columnpm20020maperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.69.11.6.880.1.28 | Columnpm20020maperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.880.1.29 | Columnpm20020maperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.880.1.30 | Columnpm20020maperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.880.1.31 | Columnpm20020maperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.69.11.6.912 | Tablepm20020maPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm20020maPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.69.11.6.912.1 | Rowpm20020maPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm20020maPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.6.912.1.1 | Columnpm20020maPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm20020maPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.6.912.1.4 | Columnpm20020maperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.912.1.5 | Columnpm20020maperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.912.1.6 | Columnpm20020maperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.912.1.7 | Columnpm20020maperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.69.11.6.912.1.28 | Columnpm20020maperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.912.1.29 | Columnpm20020maperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.912.1.30 | Columnpm20020maperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.912.1.31 | Columnpm20020maperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.69.11.6.944 | Tablepm20020maPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.6.944.1 | Rowpm20020maPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.944.1.1 | Columnpm20020maPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.6.944.1.4 | Columnpm20020maperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.944.1.5 | Columnpm20020maperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.944.1.6 | Columnpm20020maperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.944.1.7 | Columnpm20020maperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.69.11.6.944.1.28 | Columnpm20020maperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.944.1.29 | Columnpm20020maperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.69.11.6.944.1.30 | Columnpm20020maperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.69.11.6.944.1.31 | Columnpm20020maperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.69.11.7 | Nodepm20020maMonPerfLine | |||
| 1.3.6.1.4.1.20044.69.11.7.336 | Tablepm20020maPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pm20020maPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.69.11.7.336.1 | Rowpm20020maPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.7.336.1.1 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.7.336.1.2 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.336.1.3 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.336.1.4 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.336.1.5 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.336.1.6 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.336.1.7 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.336.1.8 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.336.1.9 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.336.1.10 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.336.1.11 | Columnpm20020maPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.337 | Tablepm20020maPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.7.337.1 | Rowpm20020maPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.337.1.1 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.337.1.2 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.337.1.3 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.337.1.4 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.337.1.5 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.337.1.6 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.337.1.7 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.337.1.8 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.337.1.9 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.337.1.10 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.337.1.11 | Columnpm20020maPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.338 | Tablepm20020maPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pm20020maPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.69.11.7.338.1 | Rowpm20020maPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.7.338.1.1 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.7.338.1.2 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.338.1.3 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.338.1.4 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.338.1.5 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.338.1.6 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.338.1.7 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.338.1.8 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.338.1.9 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.338.1.10 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.338.1.11 | Columnpm20020maPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.339 | Tablepm20020maPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.7.339.1 | Rowpm20020maPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.339.1.1 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.339.1.2 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.339.1.3 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.339.1.4 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.339.1.5 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.339.1.6 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.339.1.7 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.339.1.8 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.339.1.9 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.339.1.10 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.339.1.11 | Columnpm20020maPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.352 | Tablepm20020maPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pm20020maPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.69.11.7.352.1 | Rowpm20020maPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.7.352.1.1 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.69.11.7.352.1.2 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.352.1.3 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.352.1.4 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.352.1.5 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.352.1.6 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.352.1.7 | Columnpm20020maPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.353 | Tablepm20020maPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.7.353.1 | Rowpm20020maPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.353.1.1 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.353.1.2 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.353.1.3 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.353.1.4 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.353.1.5 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.353.1.6 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.353.1.7 | Columnpm20020maPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.354 | Tablepm20020maPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pm20020maPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.69.11.7.354.1 | Rowpm20020maPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pm20020maPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.7.354.1.1 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pm20020maPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.69.11.7.354.1.2 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.354.1.3 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.354.1.4 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.354.1.5 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.354.1.6 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.354.1.7 | Columnpm20020maPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.355 | Tablepm20020maPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pm20020maPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.69.11.7.355.1 | Rowpm20020maPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm20020maPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.355.1.1 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm20020maPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.69.11.7.355.1.2 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.355.1.3 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.69.11.7.355.1.4 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.355.1.5 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.69.11.7.355.1.6 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.69.11.7.355.1.7 | Columnpm20020maPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm20020maAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pm20020maClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Pm20020maDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pm20020maModuleMode | INTEGER { unusedmode(0), mode200gma(1), mode200gmr(2), mode100gulh(3) } | current | Mode for the module |
| Pm20020maMultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Pm20020maOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm20020maOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm20020maOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm20020maOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Pm20020maProtocolMode | INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } | current | Different values on the protocol mode |