EKINOPS-Pm200fr20-MIB
860 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.87 | IdentitymodulePm200fr20 | Creation. | ||
| 1.3.6.1.4.1.20044.87.2 | Nodepm200fr20alarms | |||
| 1.3.6.1.4.1.20044.87.2.1 | Nodepm200fr20AlmOther | |||
| 1.3.6.1.4.1.20044.87.2.1.1 | Nodepm200fr20AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.87.2.1.1.2 | Nodepm200fr20AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.87.2.1.1.2.1 | Scalarpm200fr20AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.87.2.1.1.2.2 | Scalarpm200fr20AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.87.2.1.1.2.3 | Scalarpm200fr20AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.87.2.1.1.2.4 | Scalarpm200fr20AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.87.2.1.1.2.5 | Scalarpm200fr20AlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.87.2.1.2 | Nodepm200fr20AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.87.2.1.2.336 | Nodepm200fr20AlmmodFanFail | |||
| 1.3.6.1.4.1.20044.87.2.1.2.336.1 | Scalarpm200fr20AlmFanFail | read-only | current | Fan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition… |
| 1.3.6.1.4.1.20044.87.2.1.2.336.2 | Scalarpm200fr20AlmFanHighSpeed | read-only | current | Fan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro… |
| 1.3.6.1.4.1.20044.87.2.1.3 | Nodepm200fr20AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.87.2.1.3.0 | Nodepm200fr20AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.87.2.1.3.0.2 | Scalarpm200fr20AlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.87.2.1.3.0.9 | Scalarpm200fr20AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.87.2.1.3.0.15 | Scalarpm200fr20AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.87.2.1.3.0.16 | Scalarpm200fr20AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.87.2.1.3.78 | Nodepm200fr20AlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.87.2.1.3.78.6 | Scalarpm200fr20AlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.87.2.1.3.78.7 | Scalarpm200fr20AlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.87.2.2 | Nodepm200fr20AlmClient | |||
| 1.3.6.1.4.1.20044.87.2.2.1 | Nodepm200fr20AlmClientNurg | |||
| 1.3.6.1.4.1.20044.87.2.2.1.272 | Tablepm200fr20AlmclientSfpWarnDdmTable | not-accessible | current | List of pm200fr20AlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1 | Rowpm200fr20AlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm200fr20AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.1 | Columnpm200fr20AlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm200fr20AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.2 | Columnpm200fr20AlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.3 | Columnpm200fr20AlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.4 | Columnpm200fr20AlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.5 | Columnpm200fr20AlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.6 | Columnpm200fr20AlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.7 | Columnpm200fr20AlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.8 | Columnpm200fr20AlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.9 | Columnpm200fr20AlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.16 | Columnpm200fr20AlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.87.2.2.1.272.1.17 | Columnpm200fr20AlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.87.2.2.2 | Nodepm200fr20AlmClientUrg | |||
| 1.3.6.1.4.1.20044.87.2.2.2.152 | Tablepm200fr20AlmclientHostLaneFaultTable | not-accessible | current | List of pm200fr20AlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1 | Rowpm200fr20AlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm200fr20AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.1 | Columnpm200fr20AlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm200fr20AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.2 | Columnpm200fr20AlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.3 | Columnpm200fr20AlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.4 | Columnpm200fr20AlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.5 | Columnpm200fr20AlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.6 | Columnpm200fr20AlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.7 | Columnpm200fr20AlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.10 | Columnpm200fr20AlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.11 | Columnpm200fr20AlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.12 | Columnpm200fr20AlmLfDetectedPortn | read-only | current | Local Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is de… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.13 | Columnpm200fr20AlmRfDetectedPortn | read-only | current | Remote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.14 | Columnpm200fr20AlmStm64ProtocDetectedPortn | read-only | current | STM64 Protocol Detected :This OID indicates a STM64 Protocol detected on the Client Port <Help> Status indicating a STM64 protocol received on the Client side … |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.15 | Columnpm200fr20Alm10gbeProtocDetectedPortn | read-only | current | 10GbE Protocol Detected :This OID indicates a 10GbE Protocol detected on the Client Port <Help> Status indicating a 10GbE protocol received on the Client side … |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.16 | Columnpm200fr20AlmOtu2ProtocDetectedPortn | read-only | current | OTU2 Protocol Detected :This OID indicates an OTU2 Protocol detected on the Client Port <Help> Status indicating a OTU2 protocol received on the Client side <C… |
| 1.3.6.1.4.1.20044.87.2.2.2.152.1.17 | Columnpm200fr20AlmOtu2eProtocDetectedPortn | read-only | current | OTU2e Protocol Detected :This OID indicates an OTU2e Protocol detected on the Client Port <Help> Status indicating a OTU2e protocol received on the Client side… |
| 1.3.6.1.4.1.20044.87.2.2.2.240 | Tablepm200fr20AlmclientSfpAlmDdmTable | not-accessible | current | List of pm200fr20AlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1 | Rowpm200fr20AlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm200fr20AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.1 | Columnpm200fr20AlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm200fr20AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.2 | Columnpm200fr20AlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.3 | Columnpm200fr20AlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.4 | Columnpm200fr20AlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.5 | Columnpm200fr20AlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.6 | Columnpm200fr20AlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.7 | Columnpm200fr20AlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.8 | Columnpm200fr20AlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.9 | Columnpm200fr20AlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.16 | Columnpm200fr20AlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.87.2.2.2.240.1.17 | Columnpm200fr20AlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.87.2.2.2.304 | Tablepm200fr20AlmclientOtnAlmTable | not-accessible | current | List of pm200fr20AlmclientOtnAlm Article |
| 1.3.6.1.4.1.20044.87.2.2.2.304.1 | Rowpm200fr20AlmclientOtnAlmEntry | not-accessible | current | Row definition for the pm200fr20AlmclientOtnAlm table |
| 1.3.6.1.4.1.20044.87.2.2.2.304.1.1 | Columnpm200fr20AlmclientOtnAlmIndex | read-only | current | Index definition for the pm200fr20AlmclientOtnAlm table |
| 1.3.6.1.4.1.20044.87.2.2.2.304.1.2 | Columnpm200fr20AlmClientOtu2eDlomPortn | read-only | current | DLOM :This OID indicates that a Loss Of Multiframe has been detected on client port<Help> This alarm indicates if a Loss Of Multiframe has been detected on the… |
| 1.3.6.1.4.1.20044.87.2.2.3 | Nodepm200fr20AlmClientCrit | |||
| 1.3.6.1.4.1.20044.87.2.2.3.8 | Tablepm200fr20AlmsynthAlmPortTable | not-accessible | current | List of pm200fr20AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1 | Rowpm200fr20AlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm200fr20AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.1 | Columnpm200fr20AlmsynthAlmPortIndex | read-only | current | Index definition for the pm200fr20AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.2 | Columnpm200fr20AlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.3 | Columnpm200fr20AlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.5 | Columnpm200fr20AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.6 | Columnpm200fr20AlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.7 | Columnpm200fr20AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.8 | Columnpm200fr20AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.9 | Columnpm200fr20AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.10 | Columnpm200fr20AlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.11 | Columnpm200fr20AlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.13 | Columnpm200fr20AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.87.2.2.3.8.1.17 | Columnpm200fr20AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.87.2.3 | Nodepm200fr20AlmLine | |||
| 1.3.6.1.4.1.20044.87.2.3.1 | Nodepm200fr20AlmLineNurg | |||
| 1.3.6.1.4.1.20044.87.2.3.1.104 | Tablepm200fr20AlmlineQsfpWarnDdmTable | not-accessible | current | List of pm200fr20AlmlineQsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1 | Rowpm200fr20AlmlineQsfpWarnDdmEntry | not-accessible | current | Row definition for the pm200fr20AlmlineQsfpWarnDdm table |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.1 | Columnpm200fr20AlmlineQsfpWarnDdmIndex | read-only | current | Index definition for the pm200fr20AlmlineQsfpWarnDdm table |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.2 | Columnpm200fr20AlmLineTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.3 | Columnpm200fr20AlmLineTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.4 | Columnpm200fr20AlmLineTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.5 | Columnpm200fr20AlmLineTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.6 | Columnpm200fr20AlmLineVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.7 | Columnpm200fr20AlmLineVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.8 | Columnpm200fr20AlmLineTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.9 | Columnpm200fr20AlmLineTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.16 | Columnpm200fr20AlmLineRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.87.2.3.1.104.1.17 | Columnpm200fr20AlmLineRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.87.2.3.2 | Nodepm200fr20AlmLineUrg | |||
| 1.3.6.1.4.1.20044.87.2.3.2.196 | Tablepm200fr20AlmlineHostLaneFaultTable | not-accessible | current | List of pm200fr20AlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1 | Rowpm200fr20AlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm200fr20AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.1 | Columnpm200fr20AlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm200fr20AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.2 | Columnpm200fr20AlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.3 | Columnpm200fr20AlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.4 | Columnpm200fr20AlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.5 | Columnpm200fr20AlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.6 | Columnpm200fr20AlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.7 | Columnpm200fr20AlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.8 | Columnpm200fr20AlmOtu4DdegPortn | read-only | current | OTU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port <Help> This alarm indicates if a Signal Degrade has been detected upon thres… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.9 | Columnpm200fr20AlmClientOtu4DtimPortn | read-only | current | OTU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port <Help> This alarm indicates if a Trace Identifier Mismatch has be… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.12 | Columnpm200fr20AlmLineOchr4DlosPPortn | read-only | current | Ochr4 - DLOS-P :This OID indicates that a Transmitter failure has been detected on line port <Help> This alarm indicates if a Transmitter Failure has been dete… |
| 1.3.6.1.4.1.20044.87.2.3.2.196.1.17 | Columnpm200fr20AlmLineOtu4DlomPortn | read-only | current | OTU4 DLOM :This OID indicates that a Loss Of Multiframe has been detected on line port <Help> This alarm indicates if a Loss Of Multiframe has been detected on… |
| 1.3.6.1.4.1.20044.87.2.3.2.208 | Tablepm200fr20AlmlineOdu4AlmTable | not-accessible | current | List of pm200fr20AlmlineOdu4Alm Article |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1 | Rowpm200fr20AlmlineOdu4AlmEntry | not-accessible | current | Row definition for the pm200fr20AlmlineOdu4Alm table |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.1 | Columnpm200fr20AlmlineOdu4AlmIndex | read-only | current | Index definition for the pm200fr20AlmlineOdu4Alm table |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.4 | Columnpm200fr20AlmLineOdu4DplmPortn | read-only | current | ODU4 DPLM :This OID indicates a Payload Mismatch is detected on the line port<Help> Alarm indicating a Payload Mismatch <Condtype> LINE_ODU4_DPLM <Probcause> r… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.6 | Columnpm200fr20AlmLineOdu4DdegPortn | read-only | current | ODU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation para… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.8 | Columnpm200fr20AlmLineOdu4IaisPortn | read-only | current | ODU4 IAIS :This OID indicates that an Alarm Indication Signal has been inserted on line port <Help> This alarm indicates if an Alarm Indication Signal has been… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.9 | Columnpm200fr20AlmLineOdu4DtimPortn | read-only | current | ODU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port<Help> This alarm indicates if an Trace Identifier Mismatch has be… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.10 | Columnpm200fr20AlmLineOdu4DaisPortn | read-only | current | ODU4 DAIS :This OID indicates that a Alarm Indication SIgnal has been detected on line port<Help> This alarm indicates if an Alarm Indication Signal has been d… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.12 | Columnpm200fr20AlmLineOdu4IociPortn | read-only | current | ODU4 IOCI :This OID indicates that an Open Connection has been inserted on line port <Help> This alarm indicates if an Open Connection Indication has been inse… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.13 | Columnpm200fr20AlmLineOdu4DociPortn | read-only | current | ODU4 DOCI :This OID indicates that a Open Connection has been detected on line port <Help> This alarm indicates if an Open Connection Indication has been detec… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.14 | Columnpm200fr20AlmLineOdu4IbdiPortn | read-only | current | ODU4 IBDI :This OID indicates that a Backward Defect Indication has been inserted on line port <Help> This alarm indicates if a Backward Defect Indication has … |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.15 | Columnpm200fr20AlmLineOdu4DbdiPortn | read-only | current | ODU4 DBDI :This OID indicates that a Backward Defect Indication has been detected on line port<Help> This alarm indicates if a Backward Defect Indication has b… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.16 | Columnpm200fr20AlmLineOdu4IlckPortn | read-only | current | ODU4 ILCK :This OID indicates that a Locked Indication has been inserted on line port <Help> This alarm indicates if a Locked Indication has been inserted on t… |
| 1.3.6.1.4.1.20044.87.2.3.2.208.1.17 | Columnpm200fr20AlmLineOdu4DlckPortn | read-only | current | ODU4 DLCK :This OID indicates that a Locked Indication has been detected on line port <Help> This alarm indicates if a Locked Indication has been detected on t… |
| 1.3.6.1.4.1.20044.87.2.3.3 | Nodepm200fr20AlmLineCrit | |||
| 1.3.6.1.4.1.20044.87.2.3.3.40 | Tablepm200fr20AlmsynthAlmLineTable | not-accessible | current | List of pm200fr20AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1 | Rowpm200fr20AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm200fr20AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.1 | Columnpm200fr20AlmsynthAlmLineIndex | read-only | current | Index definition for the pm200fr20AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.2 | Columnpm200fr20AlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.3 | Columnpm200fr20AlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.5 | Columnpm200fr20AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.6 | Columnpm200fr20AlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.7 | Columnpm200fr20AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.9 | Columnpm200fr20AlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.10 | Columnpm200fr20AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.11 | Columnpm200fr20AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.87.2.3.3.40.1.13 | Columnpm200fr20AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.87.3 | Nodepm200fr20measures | |||
| 1.3.6.1.4.1.20044.87.3.1 | Nodepm200fr20MesrOther | |||
| 1.3.6.1.4.1.20044.87.3.1.0 | Scalarpm200fr20Mesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.87.3.1.1 | Scalarpm200fr20Mesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.87.3.1.7 | Scalarpm200fr20MesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.87.3.1.196 | Scalarpm200fr20MesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.87.3.1.197 | Scalarpm200fr20MesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.87.3.1.198 | Scalarpm200fr20MesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.87.3.1.199 | Scalarpm200fr20MesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.87.3.1.200 | Scalarpm200fr20MesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset <Help> This … |
| 1.3.6.1.4.1.20044.87.3.1.201 | Scalarpm200fr20MesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset <Help> This measure gives the avera… |
| 1.3.6.1.4.1.20044.87.3.1.202 | Scalarpm200fr20MesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset <Help> This measure gives the average Q Factor on the … |
| 1.3.6.1.4.1.20044.87.3.1.203 | Scalarpm200fr20MesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset <Help> This measure gi… |
| 1.3.6.1.4.1.20044.87.3.1.204 | Scalarpm200fr20MesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset <Help> This measure gives the average OSNR on the Line interfa… |
| 1.3.6.1.4.1.20044.87.3.1.208 | Scalarpm200fr20MesrclientNetTxTempMin | read-only | current | Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.87.3.1.209 | Scalarpm200fr20MesrclientNetTxBiasMin | read-only | current | Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.87.3.1.210 | Scalarpm200fr20MesrclientNetTxPwrMin | read-only | current | Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.87.3.1.211 | Scalarpm200fr20MesrclientNetRxPwrMin | read-only | current | Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.87.3.1.212 | Scalarpm200fr20MesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.87.3.1.213 | Scalarpm200fr20MesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.87.3.1.214 | Scalarpm200fr20MesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.87.3.1.215 | Scalarpm200fr20MesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.87.3.1.216 | Scalarpm200fr20MesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.87.3.1.217 | Scalarpm200fr20MesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.87.3.1.218 | Scalarpm200fr20MesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the minimum Q Factor … |
| 1.3.6.1.4.1.20044.87.3.1.219 | Scalarpm200fr20MesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.87.3.1.220 | Scalarpm200fr20MesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the minimum OS… |
| 1.3.6.1.4.1.20044.87.3.1.224 | Scalarpm200fr20MesrclientNetTxTempMax | read-only | current | Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.87.3.1.225 | Scalarpm200fr20MesrclientNetTxBiasMax | read-only | current | Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.87.3.1.226 | Scalarpm200fr20MesrclientNetTxPwrMax | read-only | current | Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.87.3.1.227 | Scalarpm200fr20MesrclientNetRxPwrMax | read-only | current | Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.87.3.1.228 | Scalarpm200fr20MesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.87.3.1.229 | Scalarpm200fr20MesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.87.3.1.230 | Scalarpm200fr20MesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.87.3.1.231 | Scalarpm200fr20MesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.87.3.1.232 | Scalarpm200fr20MesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.87.3.1.233 | Scalarpm200fr20MesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.87.3.1.234 | Scalarpm200fr20MesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the maximum Q Factor … |
| 1.3.6.1.4.1.20044.87.3.1.235 | Scalarpm200fr20MesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.87.3.1.236 | Scalarpm200fr20MesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB) <Help> This measure gives the maximum O… |
| 1.3.6.1.4.1.20044.87.3.1.400 | Scalarpm200fr20MesrlineTrscvTemp | read-only | current | LineTrscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (U… |
| 1.3.6.1.4.1.20044.87.3.1.408 | Scalarpm200fr20MesrlineTrscvVoltage | read-only | current | Line Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/100… |
| 1.3.6.1.4.1.20044.87.3.2 | Nodepm200fr20MesrClient | |||
| 1.3.6.1.4.1.20044.87.3.2.16 | Tablepm200fr20MesrclientTxTempTable | not-accessible | current | List of pm200fr20MesrclientTxTemp Article |
| 1.3.6.1.4.1.20044.87.3.2.16.1 | Rowpm200fr20MesrclientTxTempEntry | not-accessible | current | Row definition for the pm200fr20MesrclientTxTemp table |
| 1.3.6.1.4.1.20044.87.3.2.16.1.1 | Columnpm200fr20MesrclientTxTempIndex | read-only | current | Index definition for the pm200fr20MesrclientTxTemp table |
| 1.3.6.1.4.1.20044.87.3.2.16.1.2 | Columnpm200fr20MesrclientTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.87.3.2.48 | Tablepm200fr20MesrclientTxBiasTable | not-accessible | current | List of pm200fr20MesrclientTxBias Article |
| 1.3.6.1.4.1.20044.87.3.2.48.1 | Rowpm200fr20MesrclientTxBiasEntry | not-accessible | current | Row definition for the pm200fr20MesrclientTxBias table |
| 1.3.6.1.4.1.20044.87.3.2.48.1.1 | Columnpm200fr20MesrclientTxBiasIndex | read-only | current | Index definition for the pm200fr20MesrclientTxBias table |
| 1.3.6.1.4.1.20044.87.3.2.48.1.2 | Columnpm200fr20MesrclientTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (… |
| 1.3.6.1.4.1.20044.87.3.2.80 | Tablepm200fr20MesrclientTxPwrTable | not-accessible | current | List of pm200fr20MesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.87.3.2.80.1 | Rowpm200fr20MesrclientTxPwrEntry | not-accessible | current | Row definition for the pm200fr20MesrclientTxPwr table |
| 1.3.6.1.4.1.20044.87.3.2.80.1.1 | Columnpm200fr20MesrclientTxPwrIndex | read-only | current | Index definition for the pm200fr20MesrclientTxPwr table |
| 1.3.6.1.4.1.20044.87.3.2.80.1.2 | Columnpm200fr20MesrclientTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_… |
| 1.3.6.1.4.1.20044.87.3.2.112 | Tablepm200fr20MesrclientRxPwrTable | not-accessible | current | List of pm200fr20MesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.87.3.2.112.1 | Rowpm200fr20MesrclientRxPwrEntry | not-accessible | current | Row definition for the pm200fr20MesrclientRxPwr table |
| 1.3.6.1.4.1.20044.87.3.2.112.1.1 | Columnpm200fr20MesrclientRxPwrIndex | read-only | current | Index definition for the pm200fr20MesrclientRxPwr table |
| 1.3.6.1.4.1.20044.87.3.2.112.1.2 | Columnpm200fr20MesrclientRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16… |
| 1.3.6.1.4.1.20044.87.3.3 | Nodepm200fr20MesrLine | |||
| 1.3.6.1.4.1.20044.87.3.3.144 | Tablepm200fr20MesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of pm200fr20MesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.87.3.3.144.1 | Rowpm200fr20MesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the pm200fr20MesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.87.3.3.144.1.1 | Columnpm200fr20MesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the pm200fr20MesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.87.3.3.144.1.2 | Columnpm200fr20MesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.87.3.3.148 | Tablepm200fr20MesrlineNetTxLaserTempTable | not-accessible | current | List of pm200fr20MesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.87.3.3.148.1 | Rowpm200fr20MesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the pm200fr20MesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.87.3.3.148.1.1 | Columnpm200fr20MesrlineNetTxLaserTempIndex | read-only | current | Index definition for the pm200fr20MesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.87.3.3.148.1.2 | Columnpm200fr20MesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.87.3.3.152 | Tablepm200fr20MesrlineNetTxBiasCurrentTable | not-accessible | current | List of pm200fr20MesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.87.3.3.152.1 | Rowpm200fr20MesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the pm200fr20MesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.87.3.3.152.1.1 | Columnpm200fr20MesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the pm200fr20MesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.87.3.3.152.1.2 | Columnpm200fr20MesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.87.3.3.156 | Tablepm200fr20MesrlineNetRxInputPwrTable | not-accessible | current | List of pm200fr20MesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.87.3.3.156.1 | Rowpm200fr20MesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the pm200fr20MesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.87.3.3.156.1.1 | Columnpm200fr20MesrlineNetRxInputPwrIndex | read-only | current | Index definition for the pm200fr20MesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.87.3.3.156.1.2 | Columnpm200fr20MesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (… |
| 1.3.6.1.4.1.20044.87.3.3.160 | Tablepm200fr20MesrlineResidualChromaticDispTable | not-accessible | current | List of pm200fr20MesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.87.3.3.160.1 | Rowpm200fr20MesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the pm200fr20MesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.87.3.3.160.1.1 | Columnpm200fr20MesrlineResidualChromaticDispIndex | read-only | current | Index definition for the pm200fr20MesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.87.3.3.160.1.2 | Columnpm200fr20MesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.87.3.3.164 | Tablepm200fr20MesrlineDiffGroupDelayTable | not-accessible | current | List of pm200fr20MesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.87.3.3.164.1 | Rowpm200fr20MesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the pm200fr20MesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.87.3.3.164.1.1 | Columnpm200fr20MesrlineDiffGroupDelayIndex | read-only | current | Index definition for the pm200fr20MesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.87.3.3.164.1.2 | Columnpm200fr20MesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Di… |
| 1.3.6.1.4.1.20044.87.3.3.168 | Tablepm200fr20MesrlineQFactorTable | not-accessible | current | List of pm200fr20MesrlineQFactor Article |
| 1.3.6.1.4.1.20044.87.3.3.168.1 | Rowpm200fr20MesrlineQFactorEntry | not-accessible | current | Row definition for the pm200fr20MesrlineQFactor table |
| 1.3.6.1.4.1.20044.87.3.3.168.1.1 | Columnpm200fr20MesrlineQFactorIndex | read-only | current | Index definition for the pm200fr20MesrlineQFactor table |
| 1.3.6.1.4.1.20044.87.3.3.168.1.2 | Columnpm200fr20MesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
| 1.3.6.1.4.1.20044.87.3.3.172 | Tablepm200fr20MesrlineCarrierFreqOffsetTable | not-accessible | current | List of pm200fr20MesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.87.3.3.172.1 | Rowpm200fr20MesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the pm200fr20MesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.87.3.3.172.1.1 | Columnpm200fr20MesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the pm200fr20MesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.87.3.3.172.1.2 | Columnpm200fr20MesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current C… |
| 1.3.6.1.4.1.20044.87.3.3.176 | Tablepm200fr20MesrlineOsnrTable | not-accessible | current | List of pm200fr20MesrlineOsnr Article |
| 1.3.6.1.4.1.20044.87.3.3.176.1 | Rowpm200fr20MesrlineOsnrEntry | not-accessible | current | Row definition for the pm200fr20MesrlineOsnr table |
| 1.3.6.1.4.1.20044.87.3.3.176.1.1 | Columnpm200fr20MesrlineOsnrIndex | read-only | current | Index definition for the pm200fr20MesrlineOsnr table |
| 1.3.6.1.4.1.20044.87.3.3.176.1.2 | Columnpm200fr20MesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
| 1.3.6.1.4.1.20044.87.4 | Nodepm200fr20counters | |||
| 1.3.6.1.4.1.20044.87.4.1 | Nodepm200fr20CntOther | |||
| 1.3.6.1.4.1.20044.87.4.2 | Nodepm200fr20CntClient | |||
| 1.3.6.1.4.1.20044.87.4.2.112 | Tablepm200fr20CntclientInputErrorCounterTable | not-accessible | current | List of pm200fr20CntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.87.4.2.112.1 | Rowpm200fr20CntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm200fr20CntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.2.112.1.1 | Columnpm200fr20CntclientInputErrorCounterIndex | read-only | current | Index definition for the pm200fr20CntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.2.112.1.2 | Columnpm200fr20CntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.87.4.2.112.1.3 | Columnpm200fr20CntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.2.112.1.4 | Columnpm200fr20CntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.2.144 | Tablepm200fr20CntclientCbipCounterTable | not-accessible | current | List of pm200fr20CntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.87.4.2.144.1 | Rowpm200fr20CntclientCbipCounterEntry | not-accessible | current | Row definition for the pm200fr20CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.87.4.2.144.1.1 | Columnpm200fr20CntclientCbipCounterIndex | read-only | current | Index definition for the pm200fr20CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.87.4.2.144.1.2 | Columnpm200fr20CntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.87.4.2.144.1.3 | Columnpm200fr20CntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.2.144.1.4 | Columnpm200fr20CntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.3 | Nodepm200fr20CntLine | |||
| 1.3.6.1.4.1.20044.87.4.3.192 | Tablepm200fr20CntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm200fr20CntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.192.1 | Rowpm200fr20CntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm200fr20CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.192.1.1 | Columnpm200fr20CntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm200fr20CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.192.1.2 | Columnpm200fr20CntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat… |
| 1.3.6.1.4.1.20044.87.4.3.192.1.3 | Columnpm200fr20CntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.3.192.1.4 | Columnpm200fr20CntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.3.193 | Tablepm200fr20CntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm200fr20CntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.193.1 | Rowpm200fr20CntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm200fr20CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.87.4.3.193.1.1 | Columnpm200fr20CntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm200fr20CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.87.4.3.193.1.2 | Columnpm200fr20CntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.87.4.3.193.1.3 | Columnpm200fr20CntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.87.4.3.193.1.4 | Columnpm200fr20CntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.87.4.3.194 | Tablepm200fr20CntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm200fr20CntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.194.1 | Rowpm200fr20CntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm200fr20CntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.194.1.1 | Columnpm200fr20CntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm200fr20CntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.194.1.2 | Columnpm200fr20CntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.87.4.3.194.1.3 | Columnpm200fr20CntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.87.4.3.194.1.4 | Columnpm200fr20CntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.87.4.3.195 | Tablepm200fr20CntlineDfrmTimCntTable | not-accessible | current | List of pm200fr20CntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.87.4.3.195.1 | Rowpm200fr20CntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm200fr20CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.87.4.3.195.1.1 | Columnpm200fr20CntlineDfrmTimCntIndex | read-only | current | Index definition for the pm200fr20CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.87.4.3.195.1.2 | Columnpm200fr20CntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.87.4.3.195.1.3 | Columnpm200fr20CntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.3.195.1.4 | Columnpm200fr20CntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.3.196 | Tablepm200fr20CntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of pm200fr20CntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.196.1 | Rowpm200fr20CntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm200fr20CntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.196.1.1 | Columnpm200fr20CntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the pm200fr20CntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.196.1.2 | Columnpm200fr20CntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre-SD FEC Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft … |
| 1.3.6.1.4.1.20044.87.4.3.196.1.3 | Columnpm200fr20CntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.3.196.1.4 | Columnpm200fr20CntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.3.197 | Tablepm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.197.1 | Rowpm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.197.1.1 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.87.4.3.197.1.2 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat… |
| 1.3.6.1.4.1.20044.87.4.3.197.1.3 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.3.197.1.4 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.3.198 | Tablepm200fr20CntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of pm200fr20CntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.198.1 | Rowpm200fr20CntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the pm200fr20CntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.87.4.3.198.1.1 | Columnpm200fr20CntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the pm200fr20CntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.87.4.3.198.1.2 | Columnpm200fr20CntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.87.4.3.198.1.3 | Columnpm200fr20CntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.3.198.1.4 | Columnpm200fr20CntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.87.4.3.199 | Tablepm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.87.4.3.199.1 | Rowpm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.87.4.3.199.1.1 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.87.4.3.199.1.2 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.87.4.3.199.1.3 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.87.4.3.199.1.4 | Columnpm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.87.6 | Nodepm200fr20controlsWrite | |||
| 1.3.6.1.4.1.20044.87.6.1 | Nodepm200fr20CtrlOther | |||
| 1.3.6.1.4.1.20044.87.6.1.1 | Nodepm200fr20CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.87.6.1.1.1 | Scalarpm200fr20CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.87.6.1.1.2 | Scalarpm200fr20CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.87.6.1.1.10 | Scalarpm200fr20CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.87.6.1.1.14 | Scalarpm200fr20CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.87.6.1.4 | Nodepm200fr20Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.87.6.1.4.1 | Scalarpm200fr20CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.87.6.1.4.2 | Scalarpm200fr20CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.87.6.1.5 | Nodepm200fr20CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.87.6.1.5.2 | Scalarpm200fr20CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.87.6.1.5.3 | Scalarpm200fr20CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.87.6.1.5.5 | Scalarpm200fr20CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.87.6.1.5.6 | Scalarpm200fr20CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.87.6.1.6 | Nodepm200fr20CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.87.6.1.6.1 | Scalarpm200fr20CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.87.6.1.6.5 | Scalarpm200fr20CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.87.6.1.6.6 | Scalarpm200fr20CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.87.6.1.6.7 | Scalarpm200fr20CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.87.6.1.6.8 | Scalarpm200fr20CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.87.6.1.192 | Nodepm200fr20CtrlledTest | |||
| 1.3.6.1.4.1.20044.87.6.1.192.1 | Scalarpm200fr20CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.87.6.1.192.2 | Scalarpm200fr20CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.87.6.1.192.3 | Scalarpm200fr20CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.87.6.1.201 | Nodepm200fr20CtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.87.6.1.201.1 | Scalarpm200fr20CtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.87.6.1.259 | Nodepm200fr20CtrlresetCount | |||
| 1.3.6.1.4.1.20044.87.6.1.259.1 | Scalarpm200fr20CtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.87.6.1.260 | Nodepm200fr20CtrlresetRmon | |||
| 1.3.6.1.4.1.20044.87.6.1.260.1 | Scalarpm200fr20CtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.87.6.1.261 | Nodepm200fr20CtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.87.6.1.261.1 | Scalarpm200fr20CtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.87.6.2 | Nodepm200fr20CtrlClient | |||
| 1.3.6.1.4.1.20044.87.6.2.16 | Tablepm200fr20CtrlaccessLoopTable | not-accessible | current | List of pm200fr20CtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.87.6.2.16.1 | Rowpm200fr20CtrlaccessLoopEntry | not-accessible | current | Row definition for the pm200fr20CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.87.6.2.16.1.1 | Columnpm200fr20CtrlaccessLoopIndex | read-only | current | Index definition for the pm200fr20CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.87.6.2.16.1.2 | Columnpm200fr20CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.87.6.2.17 | Tablepm200fr20CtrlclientLoopToLineTable | not-accessible | current | List of pm200fr20CtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.87.6.2.17.1 | Rowpm200fr20CtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm200fr20CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.87.6.2.17.1.1 | Columnpm200fr20CtrlclientLoopToLineIndex | read-only | current | Index definition for the pm200fr20CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.87.6.2.17.1.2 | Columnpm200fr20CtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.87.6.2.21 | Tablepm200fr20CtrlcsfUpInsTable | not-accessible | current | List of pm200fr20CtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.87.6.2.21.1 | Rowpm200fr20CtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm200fr20CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.87.6.2.21.1.1 | Columnpm200fr20CtrlcsfUpInsIndex | read-only | current | Index definition for the pm200fr20CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.87.6.2.21.1.2 | Columnpm200fr20CtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.87.6.2.22 | Tablepm200fr20CtrlcaisDwInsTable | not-accessible | current | List of pm200fr20CtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.87.6.2.22.1 | Rowpm200fr20CtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm200fr20CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.87.6.2.22.1.1 | Columnpm200fr20CtrlcaisDwInsIndex | read-only | current | Index definition for the pm200fr20CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.87.6.2.22.1.2 | Columnpm200fr20CtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.87.6.2.262 | Tablepm200fr20CtrlclientResetAllCountTable | not-accessible | current | List of pm200fr20CtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.87.6.2.262.1 | Rowpm200fr20CtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm200fr20CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.87.6.2.262.1.1 | Columnpm200fr20CtrlclientResetAllCountIndex | read-only | current | Index definition for the pm200fr20CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.87.6.2.262.1.2 | Columnpm200fr20CtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.87.6.3 | Nodepm200fr20CtrlLine | |||
| 1.3.6.1.4.1.20044.87.6.3.64 | Tablepm200fr20CtrlcommAccessLoopTable | not-accessible | current | List of pm200fr20CtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.87.6.3.64.1 | Rowpm200fr20CtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm200fr20CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.87.6.3.64.1.1 | Columnpm200fr20CtrlcommAccessLoopIndex | read-only | current | Index definition for the pm200fr20CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.87.6.3.64.1.2 | Columnpm200fr20CtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.87.6.3.66 | Tablepm200fr20CtrllineLoopTable | not-accessible | current | List of pm200fr20CtrllineLoop Article |
| 1.3.6.1.4.1.20044.87.6.3.66.1 | Rowpm200fr20CtrllineLoopEntry | not-accessible | current | Row definition for the pm200fr20CtrllineLoop table |
| 1.3.6.1.4.1.20044.87.6.3.66.1.1 | Columnpm200fr20CtrllineLoopIndex | read-only | current | Index definition for the pm200fr20CtrllineLoop table |
| 1.3.6.1.4.1.20044.87.6.3.66.1.2 | Columnpm200fr20CtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.87.6.3.69 | Tablepm200fr20CtrlfecDisableTable | not-accessible | current | List of pm200fr20CtrlfecDisable Article |
| 1.3.6.1.4.1.20044.87.6.3.69.1 | Rowpm200fr20CtrlfecDisableEntry | not-accessible | current | Row definition for the pm200fr20CtrlfecDisable table |
| 1.3.6.1.4.1.20044.87.6.3.69.1.1 | Columnpm200fr20CtrlfecDisableIndex | read-only | current | Index definition for the pm200fr20CtrlfecDisable table |
| 1.3.6.1.4.1.20044.87.6.3.69.1.2 | Columnpm200fr20CtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.87.6.3.209 | Tablepm200fr20CtrlmsaLineLoopTable | not-accessible | current | List of pm200fr20CtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.87.6.3.209.1 | Rowpm200fr20CtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pm200fr20CtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.87.6.3.209.1.1 | Columnpm200fr20CtrlmsaLineLoopIndex | read-only | current | Index definition for the pm200fr20CtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.87.6.3.209.1.2 | Columnpm200fr20CtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.87.6.3.210 | Tablepm200fr20CtrlmsaTxResetTable | not-accessible | current | List of pm200fr20CtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.87.6.3.210.1 | Rowpm200fr20CtrlmsaTxResetEntry | not-accessible | current | Row definition for the pm200fr20CtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.87.6.3.210.1.1 | Columnpm200fr20CtrlmsaTxResetIndex | read-only | current | Index definition for the pm200fr20CtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.87.6.3.210.1.2 | Columnpm200fr20CtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.87.6.3.211 | Tablepm200fr20CtrlmsaRxResetTable | not-accessible | current | List of pm200fr20CtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.87.6.3.211.1 | Rowpm200fr20CtrlmsaRxResetEntry | not-accessible | current | Row definition for the pm200fr20CtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.87.6.3.211.1.1 | Columnpm200fr20CtrlmsaRxResetIndex | read-only | current | Index definition for the pm200fr20CtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.87.6.3.211.1.2 | Columnpm200fr20CtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.87.6.3.212 | Tablepm200fr20CtrlmsaShutdownTable | not-accessible | current | List of pm200fr20CtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.87.6.3.212.1 | Rowpm200fr20CtrlmsaShutdownEntry | not-accessible | current | Row definition for the pm200fr20CtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.87.6.3.212.1.1 | Columnpm200fr20CtrlmsaShutdownIndex | read-only | current | Index definition for the pm200fr20CtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.87.6.3.212.1.2 | Columnpm200fr20CtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.87.6.3.263 | Tablepm200fr20CtrllineResetAllCountTable | not-accessible | current | List of pm200fr20CtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.87.6.3.263.1 | Rowpm200fr20CtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm200fr20CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.87.6.3.263.1.1 | Columnpm200fr20CtrllineResetAllCountIndex | read-only | current | Index definition for the pm200fr20CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.87.6.3.263.1.2 | Columnpm200fr20CtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.87.7 | Nodepm200fr20ri | |||
| 1.3.6.1.4.1.20044.87.7.1 | Nodepm200fr20riTable | |||
| 1.3.6.1.4.1.20044.87.7.1.1 | Tablepm200fr20RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.87.7.1.1.1 | Rowpm200fr20RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.87.7.1.1.1.1 | Columnpm200fr20RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.87.7.1.1.1.2 | Columnpm200fr20Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.87.7.1.2 | Tablepm200fr20RinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.87.7.1.2.1 | Rowpm200fr20RinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.87.7.1.2.1.1 | Columnpm200fr20RinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.87.7.1.2.1.2 | Columnpm200fr20RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.87.7.2 | Scalarpm200fr20RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.87.7.3 | Scalarpm200fr20RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.87.7.4 | Scalarpm200fr20RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.87.7.5 | Scalarpm200fr20RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.87.7.6 | Scalarpm200fr20RinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.87.8 | Nodepm200fr20download | |||
| 1.3.6.1.4.1.20044.87.8.1 | Nodepm200fr20DwlOther | |||
| 1.3.6.1.4.1.20044.87.8.1.0 | Nodepm200fr20DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.87.8.1.0.1 | Scalarpm200fr20DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.87.8.1.0.2 | Scalarpm200fr20DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.87.8.1.1 | Nodepm200fr20DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.87.8.1.1.1 | Scalarpm200fr20DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.87.8.1.1.2 | Scalarpm200fr20DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.87.8.1.1.5 | Scalarpm200fr20DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.87.8.1.1.6 | Scalarpm200fr20DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.87.8.1.2 | Nodepm200fr20DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.87.8.1.2.1 | Scalarpm200fr20DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.87.8.1.2.2 | Scalarpm200fr20DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.87.8.1.2.3 | Scalarpm200fr20DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.87.8.1.2.4 | Scalarpm200fr20DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.87.8.1.2.5 | Scalarpm200fr20DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.87.8.1.2.6 | Scalarpm200fr20DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.87.8.1.2.7 | Scalarpm200fr20DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.87.8.1.2.8 | Scalarpm200fr20DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.87.8.2 | Nodepm200fr20DwlClient | |||
| 1.3.6.1.4.1.20044.87.8.3 | Nodepm200fr20DwlLine | |||
| 1.3.6.1.4.1.20044.87.9 | Nodepm200fr20Config | |||
| 1.3.6.1.4.1.20044.87.9.1 | Nodepm200fr20CfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.87.9.1.1 | Tablepm200fr20CfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.1.1.1 | Rowpm200fr20CfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.87.9.1.1.1.1 | Columnpm200fr20CfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.87.9.1.1.1.3 | Columnpm200fr20CfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.87.9.2 | Nodepm200fr20CfgStartup | |||
| 1.3.6.1.4.1.20044.87.9.2.1 | Tablepm200fr20CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.2.1.1 | Rowpm200fr20CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.87.9.2.1.1.1 | Columnpm200fr20CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.87.9.2.1.1.3 | Columnpm200fr20CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.87.9.2.1.1.4 | Columnpm200fr20CfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.87.9.2.1.1.14 | Columnpm200fr20CfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.87.9.2.2 | Tablepm200fr20CfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.2.2.1 | Rowpm200fr20CfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.87.9.2.2.1.1 | Columnpm200fr20CfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.87.9.2.2.1.3 | Columnpm200fr20CfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.87.9.2.2.1.14 | Columnpm200fr20CfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.87.9.2.3 | Tablepm200fr20CfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.2.3.1 | Rowpm200fr20CfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.87.9.2.3.1.1 | Columnpm200fr20CfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.87.9.2.3.1.3 | Columnpm200fr20CfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.87.9.3 | Nodepm200fr20CfgLabels | |||
| 1.3.6.1.4.1.20044.87.9.3.1 | Tablepm200fr20CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.3.1.1 | Rowpm200fr20CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.87.9.3.1.1.1 | Columnpm200fr20CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.87.9.3.1.1.3 | Columnpm200fr20CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.87.9.3.2 | Tablepm200fr20CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.3.2.1 | Rowpm200fr20CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.87.9.3.2.1.1 | Columnpm200fr20CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.87.9.3.2.1.3 | Columnpm200fr20CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.87.9.4 | Nodepm200fr20CfgStartuptlh | |||
| 1.3.6.1.4.1.20044.87.9.4.1 | Tablepm200fr20CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.4.1.1 | Rowpm200fr20CfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.87.9.4.1.1.1 | Columnpm200fr20CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.87.9.4.1.1.6 | Columnpm200fr20CfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.87.9.4.1.1.7 | Columnpm200fr20CfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.87.9.4.1.1.8 | Columnpm200fr20CfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.87.9.4.1.1.9 | Columnpm200fr20CfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.87.9.4.1.1.10 | Columnpm200fr20CfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.87.9.5 | Nodepm200fr20CfgOther | |||
| 1.3.6.1.4.1.20044.87.9.5.1 | Nodepm200fr20tablemoduleOther | |||
| 1.3.6.1.4.1.20044.87.9.5.1.2 | Scalarpm200fr20Cfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.87.9.5.1.3 | Scalarpm200fr20CfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.87.9.5.1.4 | Scalarpm200fr20CfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.87.9.5.1.5 | Scalarpm200fr20CfgprotocolMode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.87.9.6 | Nodepm200fr20CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.87.9.6.1 | Tablepm200fr20CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.87.9.6.1.1 | Rowpm200fr20CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.87.9.6.1.1.1 | Columnpm200fr20CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.87.9.6.1.1.3 | Columnpm200fr20CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.87.9.6.1.1.4 | Columnpm200fr20CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.87.9.6.1.1.5 | Columnpm200fr20CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.87.9.6.1.1.6 | Columnpm200fr20CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.87.9.6.1.1.7 | Columnpm200fr20CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.87.9.257 | Scalarpm200fr20CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.87.10 | Nodepm200fr20traps | |||
| 1.3.6.1.4.1.20044.87.10.2 | Scalarpm200fr20trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.87.10.3 | Scalarpm200fr20trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.87.10.4 | Scalarpm200fr20trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.87.10.30 | Notificationpm200fr20LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.87.10.31 | Notificationpm200fr20LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.87.10.32 | Notificationpm200fr20LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.87.10.33 | Notificationpm200fr20LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.87.10.34 | Notificationpm200fr20LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.87.10.35 | Notificationpm200fr20LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.87.10.40 | Notificationpm200fr20ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.87.10.41 | Notificationpm200fr20ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.87.10.42 | Notificationpm200fr20ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.87.10.43 | Notificationpm200fr20ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.87.10.44 | Notificationpm200fr20ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.87.10.45 | Notificationpm200fr20ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.87.10.50 | Notificationpm200fr20PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.87.10.51 | Notificationpm200fr20PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.87.11 | Nodepm200fr20Monitoring | |||
| 1.3.6.1.4.1.20044.87.11.1 | Nodepm200fr20MonOther | |||
| 1.3.6.1.4.1.20044.87.11.1.3 | Nodepm200fr20MonRmon | |||
| 1.3.6.1.4.1.20044.87.11.2 | Nodepm200fr20MonClient | |||
| 1.3.6.1.4.1.20044.87.11.2.4 | Nodepm200fr20MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.87.11.2.4.16 | Tablepm200fr20MonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.16.1 | Rowpm200fr20MonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.16.1.1 | Columnpm200fr20MonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.16.1.2 | Columnpm200fr20MonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.87.11.2.4.16.1.3 | Columnpm200fr20MonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.16.1.4 | Columnpm200fr20MonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.48 | Tablepm200fr20MonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.48.1 | Rowpm200fr20MonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.48.1.1 | Columnpm200fr20MonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.48.1.2 | Columnpm200fr20MonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.87.11.2.4.48.1.3 | Columnpm200fr20MonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.48.1.4 | Columnpm200fr20MonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.80 | Tablepm200fr20MonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.80.1 | Rowpm200fr20MonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.80.1.1 | Columnpm200fr20MonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.80.1.2 | Columnpm200fr20MonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.87.11.2.4.80.1.3 | Columnpm200fr20MonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.80.1.4 | Columnpm200fr20MonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.112 | Tablepm200fr20MonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.112.1 | Rowpm200fr20MonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.112.1.1 | Columnpm200fr20MonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.112.1.2 | Columnpm200fr20MonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.87.11.2.4.112.1.3 | Columnpm200fr20MonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.112.1.4 | Columnpm200fr20MonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.144 | Tablepm200fr20MonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.144.1 | Rowpm200fr20MonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.144.1.1 | Columnpm200fr20MonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.144.1.2 | Columnpm200fr20MonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.87.11.2.4.144.1.3 | Columnpm200fr20MonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.144.1.4 | Columnpm200fr20MonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.176 | Tablepm200fr20MonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.176.1 | Rowpm200fr20MonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.176.1.1 | Columnpm200fr20MonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.176.1.2 | Columnpm200fr20MonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.87.11.2.4.176.1.3 | Columnpm200fr20MonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.176.1.4 | Columnpm200fr20MonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.304 | Tablepm200fr20MonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.304.1 | Rowpm200fr20MonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.304.1.1 | Columnpm200fr20MonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.304.1.2 | Columnpm200fr20MonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.87.11.2.4.304.1.3 | Columnpm200fr20MonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.304.1.4 | Columnpm200fr20MonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.336 | Tablepm200fr20MonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pm200fr20MonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.336.1 | Rowpm200fr20MonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pm200fr20MonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.336.1.1 | Columnpm200fr20MonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pm200fr20MonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.87.11.2.4.336.1.2 | Columnpm200fr20MonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.87.11.2.4.336.1.3 | Columnpm200fr20MonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.336.1.4 | Columnpm200fr20MonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.400 | Tablepm200fr20MondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.400.1 | Rowpm200fr20MondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.400.1.1 | Columnpm200fr20MondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.400.1.2 | Columnpm200fr20MondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.87.11.2.4.400.1.3 | Columnpm200fr20MondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.400.1.4 | Columnpm200fr20MondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.432 | Tablepm200fr20MondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.432.1 | Rowpm200fr20MondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.432.1.1 | Columnpm200fr20MondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.432.1.2 | Columnpm200fr20MondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.87.11.2.4.432.1.3 | Columnpm200fr20MondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.432.1.4 | Columnpm200fr20MondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.464 | Tablepm200fr20MondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.464.1 | Rowpm200fr20MondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.464.1.1 | Columnpm200fr20MondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.464.1.2 | Columnpm200fr20MondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.87.11.2.4.464.1.3 | Columnpm200fr20MondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.464.1.4 | Columnpm200fr20MondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.496 | Tablepm200fr20MondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.496.1 | Rowpm200fr20MondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.496.1.1 | Columnpm200fr20MondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.496.1.2 | Columnpm200fr20MondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.87.11.2.4.496.1.3 | Columnpm200fr20MondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.496.1.4 | Columnpm200fr20MondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.528 | Tablepm200fr20MondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.528.1 | Rowpm200fr20MondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.528.1.1 | Columnpm200fr20MondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.528.1.2 | Columnpm200fr20MondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.87.11.2.4.528.1.3 | Columnpm200fr20MondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.528.1.4 | Columnpm200fr20MondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.560 | Tablepm200fr20MondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.560.1 | Rowpm200fr20MondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.560.1.1 | Columnpm200fr20MondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.560.1.2 | Columnpm200fr20MondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.87.11.2.4.560.1.3 | Columnpm200fr20MondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.560.1.4 | Columnpm200fr20MondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.688 | Tablepm200fr20MondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.688.1 | Rowpm200fr20MondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.688.1.1 | Columnpm200fr20MondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.688.1.2 | Columnpm200fr20MondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.87.11.2.4.688.1.3 | Columnpm200fr20MondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.688.1.4 | Columnpm200fr20MondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.720 | Tablepm200fr20MondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pm200fr20MondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.87.11.2.4.720.1 | Rowpm200fr20MondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm200fr20MondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.720.1.1 | Columnpm200fr20MondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pm200fr20MondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.87.11.2.4.720.1.2 | Columnpm200fr20MondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.87.11.2.4.720.1.3 | Columnpm200fr20MondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.87.11.2.4.720.1.4 | Columnpm200fr20MondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.87.11.5 | Nodepm200fr20MonPerfOther | |||
| 1.3.6.1.4.1.20044.87.11.5.1 | Nodepm200fr20MonPerfSync | |||
| 1.3.6.1.4.1.20044.87.11.5.1.257 | Scalarpm200fr20PerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.87.11.5.1.259 | Scalarpm200fr20Perf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.87.11.5.1.260 | Scalarpm200fr20Perf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.87.11.5.2 | Nodepm200fr20MonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.87.11.5.2.1 | Scalarpm200fr20Perf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.87.11.5.2.2 | Scalarpm200fr20Perf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.87.11.5.2.5 | Scalarpm200fr20Perf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.87.11.5.2.6 | Scalarpm200fr20Perf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.87.11.5.2.7 | Scalarpm200fr20PerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.87.11.5.2.8 | Scalarpm200fr20PerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.87.11.6 | Nodepm200fr20MonPerfClient | |||
| 1.3.6.1.4.1.20044.87.11.6.16 | Tablepm200fr20PerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pm200fr20PerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.87.11.6.16.1 | Rowpm200fr20PerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.6.16.1.1 | Columnpm200fr20PerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.6.16.1.2 | Columnpm200fr20PerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.16.1.3 | Columnpm200fr20PerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.16.1.4 | Columnpm200fr20PerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.16.1.5 | Columnpm200fr20PerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.16.1.6 | Columnpm200fr20PerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.16.1.7 | Columnpm200fr20PerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.16.1.8 | Columnpm200fr20PerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.16.1.9 | Columnpm200fr20PerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.16.1.10 | Columnpm200fr20PerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.16.1.11 | Columnpm200fr20PerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.48 | Tablepm200fr20PerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.6.48.1 | Rowpm200fr20PerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.48.1.1 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.48.1.2 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.48.1.3 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.48.1.4 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.48.1.5 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.48.1.6 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.48.1.7 | Columnpm200fr20PerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.48.1.8 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.48.1.9 | Columnpm200fr20PerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.48.1.10 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.48.1.11 | Columnpm200fr20PerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.80 | Tablepm200fr20PerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pm200fr20PerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.87.11.6.80.1 | Rowpm200fr20PerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.6.80.1.1 | Columnpm200fr20PerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.6.80.1.2 | Columnpm200fr20PerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.80.1.3 | Columnpm200fr20PerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.80.1.4 | Columnpm200fr20PerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.80.1.5 | Columnpm200fr20PerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.80.1.6 | Columnpm200fr20PerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.80.1.7 | Columnpm200fr20PerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.80.1.8 | Columnpm200fr20PerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.80.1.9 | Columnpm200fr20PerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.80.1.10 | Columnpm200fr20PerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.80.1.11 | Columnpm200fr20PerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.112 | Tablepm200fr20PerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.6.112.1 | Rowpm200fr20PerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.112.1.1 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.112.1.2 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.112.1.3 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.112.1.4 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.112.1.5 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.112.1.6 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.112.1.7 | Columnpm200fr20PerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.112.1.8 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.112.1.9 | Columnpm200fr20PerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.112.1.10 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.112.1.11 | Columnpm200fr20PerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.144 | Tablepm200fr20PerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pm200fr20PerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.87.11.6.144.1 | Rowpm200fr20PerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.6.144.1.1 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.6.144.1.2 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.144.1.3 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.144.1.4 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.144.1.5 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.144.1.6 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.144.1.7 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.144.1.8 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.144.1.9 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.144.1.10 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.144.1.11 | Columnpm200fr20PerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.176 | Tablepm200fr20PerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.6.176.1 | Rowpm200fr20PerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.176.1.1 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.176.1.2 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.176.1.3 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.176.1.4 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.176.1.5 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.176.1.6 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.176.1.7 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.176.1.8 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.176.1.9 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.176.1.10 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.176.1.11 | Columnpm200fr20PerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.208 | Tablepm200fr20PerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pm200fr20PerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.87.11.6.208.1 | Rowpm200fr20PerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.6.208.1.1 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.6.208.1.2 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.208.1.3 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.208.1.4 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.208.1.5 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.208.1.6 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.208.1.7 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.208.1.8 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.208.1.9 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.208.1.10 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.208.1.11 | Columnpm200fr20PerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.240 | Tablepm200fr20PerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.6.240.1 | Rowpm200fr20PerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.240.1.1 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.240.1.2 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.240.1.3 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.6.240.1.4 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.240.1.5 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.240.1.6 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.240.1.7 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.240.1.8 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.240.1.9 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.240.1.10 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.240.1.11 | Columnpm200fr20PerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.6.848 | Tablepm200fr20PerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm200fr20PerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.87.11.6.848.1 | Rowpm200fr20PerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm200fr20PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.6.848.1.1 | Columnpm200fr20PerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm200fr20PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.6.848.1.4 | Columnpm200fr20perfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.848.1.5 | Columnpm200fr20perfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.848.1.6 | Columnpm200fr20perfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.848.1.7 | Columnpm200fr20perfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.87.11.6.848.1.28 | Columnpm200fr20perfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.848.1.29 | Columnpm200fr20perfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.848.1.30 | Columnpm200fr20perfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.848.1.31 | Columnpm200fr20perfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.87.11.6.880 | Tablepm200fr20PerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.6.880.1 | Rowpm200fr20PerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.880.1.1 | Columnpm200fr20PerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.880.1.4 | Columnpm200fr20perfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.880.1.5 | Columnpm200fr20perfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.880.1.6 | Columnpm200fr20perfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.880.1.7 | Columnpm200fr20perfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.87.11.6.880.1.28 | Columnpm200fr20perfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.880.1.29 | Columnpm200fr20perfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.880.1.30 | Columnpm200fr20perfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.880.1.31 | Columnpm200fr20perfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.87.11.6.912 | Tablepm200fr20PerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm200fr20PerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.87.11.6.912.1 | Rowpm200fr20PerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm200fr20PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.6.912.1.1 | Columnpm200fr20PerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm200fr20PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.6.912.1.4 | Columnpm200fr20perfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.912.1.5 | Columnpm200fr20perfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.912.1.6 | Columnpm200fr20perfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.912.1.7 | Columnpm200fr20perfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.87.11.6.912.1.28 | Columnpm200fr20perfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.912.1.29 | Columnpm200fr20perfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.912.1.30 | Columnpm200fr20perfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.912.1.31 | Columnpm200fr20perfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.87.11.6.944 | Tablepm200fr20PerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.6.944.1 | Rowpm200fr20PerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.944.1.1 | Columnpm200fr20PerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.6.944.1.4 | Columnpm200fr20perfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.944.1.5 | Columnpm200fr20perfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.944.1.6 | Columnpm200fr20perfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.944.1.7 | Columnpm200fr20perfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.87.11.6.944.1.28 | Columnpm200fr20perfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.944.1.29 | Columnpm200fr20perfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.87.11.6.944.1.30 | Columnpm200fr20perfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.87.11.6.944.1.31 | Columnpm200fr20perfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.87.11.7 | Nodepm200fr20MonPerfLine | |||
| 1.3.6.1.4.1.20044.87.11.7.336 | Tablepm200fr20PerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pm200fr20PerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.87.11.7.336.1 | Rowpm200fr20PerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.7.336.1.1 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.7.336.1.2 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.336.1.3 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.336.1.4 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.336.1.5 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.336.1.6 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.336.1.7 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.336.1.8 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.336.1.9 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.336.1.10 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.336.1.11 | Columnpm200fr20PerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.337 | Tablepm200fr20PerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.7.337.1 | Rowpm200fr20PerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.337.1.1 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.337.1.2 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.337.1.3 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.337.1.4 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.337.1.5 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.337.1.6 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.337.1.7 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.337.1.8 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.337.1.9 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.337.1.10 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.337.1.11 | Columnpm200fr20PerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.338 | Tablepm200fr20PerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pm200fr20PerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.87.11.7.338.1 | Rowpm200fr20PerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.7.338.1.1 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.7.338.1.2 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.338.1.3 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.338.1.4 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.338.1.5 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.338.1.6 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.338.1.7 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.338.1.8 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.338.1.9 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.338.1.10 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.338.1.11 | Columnpm200fr20PerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.339 | Tablepm200fr20PerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.7.339.1 | Rowpm200fr20PerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.339.1.1 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.339.1.2 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.339.1.3 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.339.1.4 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.339.1.5 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.339.1.6 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.339.1.7 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.339.1.8 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.339.1.9 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.339.1.10 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.339.1.11 | Columnpm200fr20PerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.352 | Tablepm200fr20PerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pm200fr20PerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.87.11.7.352.1 | Rowpm200fr20PerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.7.352.1.1 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.87.11.7.352.1.2 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.352.1.3 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.352.1.4 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.352.1.5 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.352.1.6 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.352.1.7 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.353 | Tablepm200fr20PerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.7.353.1 | Rowpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.353.1.1 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.353.1.2 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.353.1.3 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.353.1.4 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.353.1.5 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.353.1.6 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.353.1.7 | Columnpm200fr20PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.354 | Tablepm200fr20PerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pm200fr20PerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.87.11.7.354.1 | Rowpm200fr20PerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pm200fr20PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.7.354.1.1 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pm200fr20PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.87.11.7.354.1.2 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.354.1.3 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.354.1.4 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.354.1.5 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.354.1.6 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.354.1.7 | Columnpm200fr20PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.355 | Tablepm200fr20PerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pm200fr20PerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.87.11.7.355.1 | Rowpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm200fr20PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.355.1.1 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm200fr20PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.87.11.7.355.1.2 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.355.1.3 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.87.11.7.355.1.4 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.355.1.5 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.87.11.7.355.1.6 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.87.11.7.355.1.7 | Columnpm200fr20PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm200fr20ClientProtocolA | INTEGER { protocolclientvalue0A(1), protocolclientvalue1A(2), protocolclientvalue2A(3) } | current | Different values on the protocol on the client ports |
| Pm200fr20ClientProtocolB | INTEGER { protocolclientvalue0B(1), protocolclientvalue1B(2), protocolclientvalue2B(3), protocolclientvalue3B(4), protocolclientvalue4B(5) } | current | Different values on the protocol on the client ports |
| Pm200fr20ClientProtocolC | INTEGER { protocolclientvalue0C(1) } | current | Different values on the protocol on the client ports |
| Pm200fr20DccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pm200fr20OrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm200fr20OtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm200fr20OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm200fr20ProtocolMode | INTEGER { protocolmodevalue0(1), protocolmodevalue1(2), protocolmodevalue2(3) } | current | Different values on the protocol mode |