EKINOPS-Pm253-MIB
999 objects
MIB for managing Ekinops modules with PM253 software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.13 | IdentitymodulePm253 | MIB for managing Ekinops modules with PM253 software | ||
| 1.3.6.1.4.1.20044.13.2 | Nodepm253alarms | |||
| 1.3.6.1.4.1.20044.13.2.1 | Nodepm253AlmOther | |||
| 1.3.6.1.4.1.20044.13.2.1.1 | Nodepm253AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.13.2.1.1.0 | Nodepm253AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.13.2.1.1.0.9 | Scalarpm253AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.13.2.1.1.0.15 | Scalarpm253AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.13.2.1.1.0.16 | Scalarpm253AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.13.2.1.1.2 | Nodepm253AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.13.2.1.1.2.1 | Scalarpm253AlmConfTableSave | read-only | current | PM Configuration Save :This OID is set during the saving of a new configuration table in the PM Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other (1) … |
| 1.3.6.1.4.1.20044.13.2.1.1.2.2 | Scalarpm253AlmInvUpload | read-only | current | Inventory Upload :This OID is set during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarity… |
| 1.3.6.1.4.1.20044.13.2.1.1.2.3 | Scalarpm253AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is set during the loading of configuration tables in the PMs RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmtype> … |
| 1.3.6.1.4.1.20044.13.2.1.1.2.4 | Scalarpm253AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.13.2.1.1.2.5 | Scalarpm253AlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.13.2.1.2 | Nodepm253AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.13.2.1.2.194 | Nodepm253AlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.13.2.1.2.194.1 | Scalarpm253AlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.13.2.1.2.194.2 | Scalarpm253AlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.13.2.1.2.194.3 | Scalarpm253AlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.13.2.1.2.194.4 | Scalarpm253AlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.13.2.1.2.194.5 | Scalarpm253AlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.13.2.1.2.195 | Nodepm253AlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.13.2.1.2.195.1 | Scalarpm253AlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.2 | Scalarpm253AlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.3 | Scalarpm253AlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.5 | Scalarpm253AlmSfp1InitFail | read-only | current | SFP1 Init Fail :This OID indicates that the SFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.6 | Scalarpm253AlmSfp2InitFail | read-only | current | SFP2 Init Fail :This OID indicates that the SFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.7 | Scalarpm253AlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.8 | Scalarpm253AlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.9 | Scalarpm253AlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.10 | Scalarpm253AlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.13.2.1.2.195.11 | Scalarpm253AlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.13.2.1.3 | Nodepm253AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.13.2.2 | Nodepm253AlmPort | |||
| 1.3.6.1.4.1.20044.13.2.2.1 | Nodepm253AlmPortNurg | |||
| 1.3.6.1.4.1.20044.13.2.2.1.48 | Tablepm253AlmclientSfpWarnDdmTable | not-accessible | current | List of pm253AlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1 | Rowpm253AlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm253AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.1 | Columnpm253AlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm253AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.2 | Columnpm253AlmClientTxPwLowWngPortn | read-only | current | Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CL… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.3 | Columnpm253AlmClientTxPwrHighWngPortn | read-only | current | Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.4 | Columnpm253AlmClientTxBiasLowWngPortn | read-only | current | Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.5 | Columnpm253AlmClientTxBiasHighWngPortn | read-only | current | Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.6 | Columnpm253AlmClientVccLowWngPortn | read-only | current | Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.7 | Columnpm253AlmClientVccHighWngPortn | read-only | current | Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.8 | Columnpm253AlmClientTempLowWngPortn | read-only | current | Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.9 | Columnpm253AlmClientTempHighWngPortn | read-only | current | Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIEN… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.16 | Columnpm253AlmClientRxPwrLowWngPortn | read-only | current | Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLI… |
| 1.3.6.1.4.1.20044.13.2.2.1.48.1.17 | Columnpm253AlmClientRxPwrHighWngPortn | read-only | current | Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> C… |
| 1.3.6.1.4.1.20044.13.2.2.2 | Nodepm253AlmPortUrg | |||
| 1.3.6.1.4.1.20044.13.2.2.2.32 | Tablepm253AlmclientSfpAlmDdmTable | not-accessible | current | List of pm253AlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1 | Rowpm253AlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm253AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.1 | Columnpm253AlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm253AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.2 | Columnpm253AlmClientTxPwrLowAlaPortn | read-only | current | Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_PW… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.3 | Columnpm253AlmClientTxPwrHighAlaPortn | read-only | current | Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.4 | Columnpm253AlmClientTxBiasLowAlaPortn | read-only | current | Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.5 | Columnpm253AlmClientTxBiasHighAlaPortn | read-only | current | Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_T… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.6 | Columnpm253AlmClientVccLowAlaPortn | read-only | current | Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_V… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.7 | Columnpm253AlmClientVccHighAlaPortn | read-only | current | Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.8 | Columnpm253AlmClientTempLowAlaPortn | read-only | current | Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TEMP_LOW_A… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.9 | Columnpm253AlmClientTempHighAlaPortn | read-only | current | Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TEMP_HIG… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.16 | Columnpm253AlmClientRxPwrLowAlaPortn | read-only | current | Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_RX_PWR… |
| 1.3.6.1.4.1.20044.13.2.2.2.32.1.17 | Columnpm253AlmClientRxPwrHighAlaPortn | read-only | current | Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_RX_P… |
| 1.3.6.1.4.1.20044.13.2.2.3 | Nodepm253AlmPortCrit | |||
| 1.3.6.1.4.1.20044.13.2.2.3.8 | Tablepm253AlmsynthAlmClientTable | not-accessible | current | List of pm253AlmsynthAlmClient Article |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1 | Rowpm253AlmsynthAlmClientEntry | not-accessible | current | Row definition for the pm253AlmsynthAlmClient table |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.1 | Columnpm253AlmsynthAlmClientIndex | read-only | current | Index definition for the pm253AlmsynthAlmClient table |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.2 | Columnpm253AlmClientSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. … |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.3 | Columnpm253AlmClientDdmAbsentPortn | read-only | current | DDM Supported On Client SFP :This OID indicates that the Client SFP module does not support the Digital Diagnostic Monitoring function <Help> This status indic… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.5 | Columnpm253AlmClientHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> CLIENT_HW_FAIL_ACC_1 <Probcause> equipmentMalfuncti… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.6 | Columnpm253AlmClientLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output has shut down. <Help> This status indicates if the client transceiver laser is … |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.7 | Columnpm253AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.8 | Columnpm253AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.9 | Columnpm253AlmClientDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.10 | Columnpm253AlmClientSfpDdmWarningPortn | read-only | current | Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.11 | Columnpm253AlmClientSfpDdmAlmPortn | read-only | current | Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.13 | Columnpm253AlmClientFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> CLIENT_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAla… |
| 1.3.6.1.4.1.20044.13.2.2.3.8.1.17 | Columnpm253AlmClientUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.13.2.2.3.16 | Tablepm253AlmaccessioAlmTable | not-accessible | current | List of pm253AlmaccessioAlm Article |
| 1.3.6.1.4.1.20044.13.2.2.3.16.1 | Rowpm253AlmaccessioAlmEntry | not-accessible | current | Row definition for the pm253AlmaccessioAlm table |
| 1.3.6.1.4.1.20044.13.2.2.3.16.1.1 | Columnpm253AlmaccessioAlmIndex | read-only | current | Index definition for the pm253AlmaccessioAlm table |
| 1.3.6.1.4.1.20044.13.2.2.3.16.1.2 | Columnpm253AlmClientDwLasFailPortn | read-only | current | Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.13.2.2.3.16.1.5 | Columnpm253AlmClientUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.13.2.2.3.72 | Tablepm253AlmclientMapperDeAlmTable | not-accessible | current | List of pm253AlmclientMapperDeAlm Article |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1 | Rowpm253AlmclientMapperDeAlmEntry | not-accessible | current | Row definition for the pm253AlmclientMapperDeAlm table |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1.1 | Columnpm253AlmclientMapperDeAlmIndex | read-only | current | Index definition for the pm253AlmclientMapperDeAlm table |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1.2 | Columnpm253AlmClientUpAccOosPortn | read-only | current | Client Loss Of 10b/8b Synchro :This OID indicates the upstream client input port has lost synchronization on its 10B/8B decoder <Help> This alarms indicates if… |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1.11 | Columnpm253AlmClientUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1.12 | Columnpm253AlmClientDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1.15 | Columnpm253AlmClientDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.13.2.2.3.72.1.16 | Columnpm253AlmClientLoopAccFifoFailPortn | read-only | deprecated | Client Port Loop FIFO Failure :active only in client loopback mode. <Condtype> CLIENT_LOOP_ACC_FIFO_FAIL_1 <Probcause> equipmentMalfunction (16) <Alarmtype> eq… |
| 1.3.6.1.4.1.20044.13.2.2.3.104 | Tablepm253AlmaccessioSdhAlarmTable | not-accessible | current | List of pm253AlmaccessioSdhAlarm Article |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1 | Rowpm253AlmaccessioSdhAlarmEntry | not-accessible | current | Row definition for the pm253AlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.1 | Columnpm253AlmaccessioSdhAlarmIndex | read-only | current | Index definition for the pm253AlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.2 | Columnpm253AlmLosTrscPortn | read-only | current | Client Transceiver Loss Of Signal :This OID indicates that a Loss of Signal condition has been detected on the client input transceiver <Condtype> LOS_TRSC_1 <… |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.3 | Columnpm253AlmFifoErrPortn | read-only | current | Client Transceiver Fifo Error :This OID indicates that an error has been detected in the FIFO of the client transceiver <Condtype> FIFO_ERR_1 <Probcause> recei… |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.4 | Columnpm253AlmRxLossOfLockPortn | read-only | current | Client Rx Clock Lock Error :This OID indicates the recovered receive clock of the client transceiver is not locked <Condtype> RX_LOSS_OF_LOCK_1 <Probcause> rec… |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.5 | Columnpm253AlmTxLossOfLockPortn | read-only | current | Client Tx Clock Lock Error :This OID indicates that the transmit clock of the client transceiver is not locked <Condtype> TX_LOSS_OF_LOCK_1 <Probcause> transmi… |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.6 | Columnpm253AlmClientAisDetPortn | read-only | current | MS-AIS Detected On Client Input :This OID indicates that a MS-AIS has been detected on the client input stream <Help> This alarm indicates if there is a MS-AIS… |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.7 | Columnpm253AlmClientRdiDetPortn | read-only | current | MS-RDI Detected On Client Input :This OID indicates that a MS-RDI has been detected on the client input stream <Help> This alarm indicates if there is a MS-RDI… |
| 1.3.6.1.4.1.20044.13.2.2.3.104.1.8 | Columnpm253AlmClientOofPortn | read-only | current | Client Rx Out Of Frame :This OID indicates that an Out Of Frame condition has been detected on the client input stream <Help> This alarm indicates if there is … |
| 1.3.6.1.4.1.20044.13.2.3 | Nodepm253AlmLine | |||
| 1.3.6.1.4.1.20044.13.2.3.1 | Nodepm253AlmLineNurg | |||
| 1.3.6.1.4.1.20044.13.2.3.1.130 | Tablepm253AlmlineDownS1Table | not-accessible | current | List of pm253AlmlineDownS1 Article |
| 1.3.6.1.4.1.20044.13.2.3.1.130.1 | Rowpm253AlmlineDownS1Entry | not-accessible | current | Row definition for the pm253AlmlineDownS1 table |
| 1.3.6.1.4.1.20044.13.2.3.1.130.1.1 | Columnpm253AlmlineDownS1Index | read-only | current | Index definition for the pm253AlmlineDownS1 table |
| 1.3.6.1.4.1.20044.13.2.3.1.130.1.2 | Columnpm253AlmlineDownS1Portn | read-only | current | Line 1 S1 Extracted Value :This gives the value of S1 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_S1_8_1… |
| 1.3.6.1.4.1.20044.13.2.3.1.131 | Tablepm253AlmlineDownK1Table | not-accessible | current | List of pm253AlmlineDownK1 Article |
| 1.3.6.1.4.1.20044.13.2.3.1.131.1 | Rowpm253AlmlineDownK1Entry | not-accessible | current | Row definition for the pm253AlmlineDownK1 table |
| 1.3.6.1.4.1.20044.13.2.3.1.131.1.1 | Columnpm253AlmlineDownK1Index | read-only | current | Index definition for the pm253AlmlineDownK1 table |
| 1.3.6.1.4.1.20044.13.2.3.1.131.1.2 | Columnpm253AlmlineDownK1Portn | read-only | current | Line 1 K1 Extracted Value :This gives the value of K1 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_K1_8_1… |
| 1.3.6.1.4.1.20044.13.2.3.1.132 | Tablepm253AlmlineDownK2Table | not-accessible | current | List of pm253AlmlineDownK2 Article |
| 1.3.6.1.4.1.20044.13.2.3.1.132.1 | Rowpm253AlmlineDownK2Entry | not-accessible | current | Row definition for the pm253AlmlineDownK2 table |
| 1.3.6.1.4.1.20044.13.2.3.1.132.1.1 | Columnpm253AlmlineDownK2Index | read-only | current | Index definition for the pm253AlmlineDownK2 table |
| 1.3.6.1.4.1.20044.13.2.3.1.132.1.2 | Columnpm253AlmlineDownK2Portn | read-only | current | Line 1 K2 Extracted Value :This gives the value of K2 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_K2_8_1… |
| 1.3.6.1.4.1.20044.13.2.3.1.164 | Tablepm253AlmlineSfpWarnDdmTable | not-accessible | current | List of pm253AlmlineSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1 | Rowpm253AlmlineSfpWarnDdmEntry | not-accessible | current | Row definition for the pm253AlmlineSfpWarnDdm table |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.1 | Columnpm253AlmlineSfpWarnDdmIndex | read-only | current | Index definition for the pm253AlmlineSfpWarnDdm table |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.2 | Columnpm253AlmLineTxPwLowWngPortn | read-only | current | Line SFP Tx Power Low Warning :Warning indicating that the SFP output power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.3 | Columnpm253AlmLineTxPwrHighWngPortn | read-only | current | Line SFP Tx Power High Warning :Warning indicating that the SFP output power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LI… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.4 | Columnpm253AlmLineTxBiasLowWngPortn | read-only | current | Line SFP Bias Low Warning :Warning indicating that the SFP laser bias current of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LI… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.5 | Columnpm253AlmLineTxBiasHighWngPortn | read-only | current | Line SFP Bias High Warning :Warning indicating that the SFP laser bias current of Line is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.6 | Columnpm253AlmLineVccLowWngPortn | read-only | current | Line SFP Power Supply Low Warning :Warning indicating that the SFP power supply of Line is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.7 | Columnpm253AlmLineVccHighWngPortn | read-only | current | Line SFP Power Supply High Warning :Warning indicating that the SFP power supply of Line is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.8 | Columnpm253AlmLineTempLowWngPortn | read-only | current | Line SFP Temp Low Warning :Warning indicating that the SFP temperature of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.9 | Columnpm253AlmLineTempHighWngPortn | read-only | current | Line SFP Temp High Warning :Warning indicating that the SFP temperature of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TE… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.16 | Columnpm253AlmLineRxPwrLowWngPortn | read-only | current | Line SFP Rx Power Low Warning :Warning indicating that the SFP input power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_… |
| 1.3.6.1.4.1.20044.13.2.3.1.164.1.17 | Columnpm253AlmLineRxPwrHighWngPortn | read-only | current | Line SFP Rx Power High Warning :Warning indicating that the SFP input power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LIN… |
| 1.3.6.1.4.1.20044.13.2.3.2 | Nodepm253AlmLineUrg | |||
| 1.3.6.1.4.1.20044.13.2.3.2.162 | Tablepm253AlmlineSfpAlaDdmTable | not-accessible | current | List of pm253AlmlineSfpAlaDdm Article |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1 | Rowpm253AlmlineSfpAlaDdmEntry | not-accessible | current | Row definition for the pm253AlmlineSfpAlaDdm table |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.1 | Columnpm253AlmlineSfpAlaDdmIndex | read-only | current | Index definition for the pm253AlmlineSfpAlaDdm table |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.2 | Columnpm253AlmLineTxPwrLowAlaPortn | read-only | current | Line SFP Tx Power Low :Alarm indicating that the SFP output power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_LO… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.3 | Columnpm253AlmLineTxPwrHighAlaPortn | read-only | current | Line SFP Tx Power High :Alarm indicating that the SFP output power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.4 | Columnpm253AlmLineTxBiasLowAlaPortn | read-only | current | Line SFP Bias Low :Alarm indicating that the SFP laser bias current of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BIAS… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.5 | Columnpm253AlmLineTxBiasHighAlaPortn | read-only | current | Line SFP Bias High :Alarm indicating that the SFP laser bias current of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BI… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.6 | Columnpm253AlmLineVccLowAlaPortn | read-only | current | Line SFP Power Supply Low :Alarm indicating that the SFP power supply of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC_L… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.7 | Columnpm253AlmLineVccHighAlaPortn | read-only | current | Line SFP Power Supply High :Alarm indicating that the SFP power supply of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.8 | Columnpm253AlmLineTempLowAlaPortn | read-only | current | Line SFP Temp Low :Alarm indicating that the SFP temperature of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_LOW_ALA_1… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.9 | Columnpm253AlmLineTempHighAlaPortn | read-only | current | Line SFP Temp High :Alarm indicating that the SFP temperature of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_HIGH_AL… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.16 | Columnpm253AlmLineRxPwrLowAlaPortn | read-only | current | Line SFP Rx Power Low :Alarm indicating that the SFP input power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_LOW… |
| 1.3.6.1.4.1.20044.13.2.3.2.162.1.17 | Columnpm253AlmLineRxPwrHighAlaPortn | read-only | current | Line SFP Rx Power High :Alarm indicating that the SFP input power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_H… |
| 1.3.6.1.4.1.20044.13.2.3.3 | Nodepm253AlmLineCrit | |||
| 1.3.6.1.4.1.20044.13.2.3.3.4 | Tablepm253AlmsynthAlmLineTable | not-accessible | current | List of pm253AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1 | Rowpm253AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm253AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.1 | Columnpm253AlmsynthAlmLineIndex | read-only | current | Index definition for the pm253AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.2 | Columnpm253AlmLineSfpAbsentPortn | read-only | current | Line SFP Absent :This OID indicates that the SFP module is not present in the line port. <Help> This alarm indicates if the line transceiver is present. <Condt… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.3 | Columnpm253AlmLineDdmAbsentPortn | read-only | current | DDM Supported On Line SFP :This OID indicates that the SFP module on line port does not support Digital Diagnostic Monitoring Functions <Help> This status indi… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.5 | Columnpm253AlmLineHwFailPortn | read-only | current | Line HW Fail :This OID indicates a failure condition on the Line port, the most probable cause being a HW issue <Condtype> LINE_HW_FAIL_2 <Probcause> equipment… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.6 | Columnpm253AlmLineLsdPortn | read-only | current | Line SFP Laser Shutdown :This OID indicates the SFP transmitter line output is shut down. <Help> This status indicates if the line transceiver laser is ON or O… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.7 | Columnpm253AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.9 | Columnpm253AlmLineUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted on the outgoing 2.5 Gb/s SDH/SONET signal. <Help> This status indi… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.10 | Columnpm253AlmLineDdmWarningPortn | read-only | current | Warning On Line SFP DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.11 | Columnpm253AlmLineDdmAlmPortn | read-only | current | Alarm On Line SFP DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been dete… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.13 | Columnpm253AlmLineFailPortn | read-only | current | Line Fail :This OID indicates a failure condition on the Line. <Condtype> LINE_FAIL_2 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.13.2.3.3.4.1.17 | Columnpm253AlmLineActivePortn | read-only | current | Line Active :This OID indicates the line is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <… |
| 1.3.6.1.4.1.20044.13.2.3.3.128 | Tablepm253AlmlineDfrmAlmTable | not-accessible | current | List of pm253AlmlineDfrmAlm Article |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1 | Rowpm253AlmlineDfrmAlmEntry | not-accessible | current | Row definition for the pm253AlmlineDfrmAlm table |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.1 | Columnpm253AlmlineDfrmAlmIndex | read-only | current | Index definition for the pm253AlmlineDfrmAlm table |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.2 | Columnpm253AlmLineDwAisDetPortn | read-only | current | MS-AIS/L-AIS Detected On Line Input :This OID indicates that an MS-AIS has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.3 | Columnpm253AlmLineDwRdiDetPortn | read-only | current | MS-RDI/L-RDI Detected On Line Input :This OID indicates that an MS-RDI has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.4 | Columnpm253AlmLineDwOofPortn | read-only | current | SONET/SDH Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.5 | Columnpm253AlmLineDwLofPortn | read-only | current | SONET/SDH Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if … |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.10 | Columnpm253AlmDwLopFirstPortn | read-only | current | P-LOP On STS48c Or 1st STS24c :This OID indicates that a Loss Of Pointer has been detected on incoming STS-48c (or first STS-24c) input signal <Help> This alar… |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.11 | Columnpm253AlmDwAuAisFirstPortn | read-only | current | P-AIS On STS48c Or 1st STS24c :This OID indicates that an AU-AIS/AIS-P has been detected on incoming STS-48c (or first STS-24c) input signal <Help> This alarm … |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.12 | Columnpm253AlmDwLopSecondPortn | read-only | current | P-LOP On The 2nd STS24c :This OID indicates that a Loss Of Pointer has been detected on second incoming STS-24c input signal <Help> This alarm indicates if Los… |
| 1.3.6.1.4.1.20044.13.2.3.3.128.1.13 | Columnpm253AlmDwAuAisSecondPortn | read-only | current | P-AIS On The 2nd STS24c :This OID indicates that an AU-AIS/AIS-P has been detected on second incoming STS-24c input signal <Help> This alarm indicates if a Pat… |
| 1.3.6.1.4.1.20044.13.2.3.3.160 | Tablepm253AlmlineIoAlmTable | not-accessible | current | List of pm253AlmlineIoAlm Article |
| 1.3.6.1.4.1.20044.13.2.3.3.160.1 | Rowpm253AlmlineIoAlmEntry | not-accessible | current | Row definition for the pm253AlmlineIoAlm table |
| 1.3.6.1.4.1.20044.13.2.3.3.160.1.1 | Columnpm253AlmlineIoAlmIndex | read-only | current | Index definition for the pm253AlmlineIoAlm table |
| 1.3.6.1.4.1.20044.13.2.3.3.160.1.2 | Columnpm253AlmLineUpLasFailPortn | read-only | current | Line SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the line port #n (this alarm reports the transmitter failure alarm g… |
| 1.3.6.1.4.1.20044.13.2.3.3.160.1.5 | Columnpm253AlmLineDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the line port #n <Help> This alarm indicates if an optical signal is dete… |
| 1.3.6.1.4.1.20044.13.3 | Nodepm253measures | |||
| 1.3.6.1.4.1.20044.13.3.1 | Nodepm253MesrOther | |||
| 1.3.6.1.4.1.20044.13.3.2 | Nodepm253MesrPort | |||
| 1.3.6.1.4.1.20044.13.3.2.16 | Tablepm253MesrclientTempMeasTable | not-accessible | current | List of pm253MesrclientTempMeas Article |
| 1.3.6.1.4.1.20044.13.3.2.16.1 | Rowpm253MesrclientTempMeasEntry | not-accessible | current | Row definition for the pm253MesrclientTempMeas table |
| 1.3.6.1.4.1.20044.13.3.2.16.1.1 | Columnpm253MesrclientTempMeasIndex | read-only | current | Index definition for the pm253MesrclientTempMeas table |
| 1.3.6.1.4.1.20044.13.3.2.16.1.2 | Columnpm253MesrclientTempMeasPortn | read-only | current | Client SFP Temperature :This OID gives the temperature value of the client SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit … |
| 1.3.6.1.4.1.20044.13.3.2.24 | Tablepm253MesrclientVoltMeasTable | not-accessible | current | List of pm253MesrclientVoltMeas Article |
| 1.3.6.1.4.1.20044.13.3.2.24.1 | Rowpm253MesrclientVoltMeasEntry | not-accessible | current | Row definition for the pm253MesrclientVoltMeas table |
| 1.3.6.1.4.1.20044.13.3.2.24.1.1 | Columnpm253MesrclientVoltMeasIndex | read-only | current | Index definition for the pm253MesrclientVoltMeas table |
| 1.3.6.1.4.1.20044.13.3.2.24.1.2 | Columnpm253MesrclientVoltMeasPortn | read-only | current | Client SFP Power Supply :This OID gives the 3V3 voltage value of the client SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit =… |
| 1.3.6.1.4.1.20044.13.3.2.32 | Tablepm253MesrclientBiasMeasTable | not-accessible | current | List of pm253MesrclientBiasMeas Article |
| 1.3.6.1.4.1.20044.13.3.2.32.1 | Rowpm253MesrclientBiasMeasEntry | not-accessible | current | Row definition for the pm253MesrclientBiasMeas table |
| 1.3.6.1.4.1.20044.13.3.2.32.1.1 | Columnpm253MesrclientBiasMeasIndex | read-only | current | Index definition for the pm253MesrclientBiasMeas table |
| 1.3.6.1.4.1.20044.13.3.2.32.1.2 | Columnpm253MesrclientBiasMeasPortn | read-only | current | Client SFP Laser Bias :This OID gives the bias value of the Client SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> Th… |
| 1.3.6.1.4.1.20044.13.3.2.40 | Tablepm253MesrclientTxpwrMeasTable | not-accessible | current | List of pm253MesrclientTxpwrMeas Article |
| 1.3.6.1.4.1.20044.13.3.2.40.1 | Rowpm253MesrclientTxpwrMeasEntry | not-accessible | current | Row definition for the pm253MesrclientTxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.2.40.1.1 | Columnpm253MesrclientTxpwrMeasIndex | read-only | current | Index definition for the pm253MesrclientTxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.2.40.1.2 | Columnpm253MesrclientTxpwrMeasPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the Client SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit… |
| 1.3.6.1.4.1.20044.13.3.2.48 | Tablepm253MesrclientRxpwrMeasTable | not-accessible | current | List of pm253MesrclientRxpwrMeas Article |
| 1.3.6.1.4.1.20044.13.3.2.48.1 | Rowpm253MesrclientRxpwrMeasEntry | not-accessible | current | Row definition for the pm253MesrclientRxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.2.48.1.1 | Columnpm253MesrclientRxpwrMeasIndex | read-only | current | Index definition for the pm253MesrclientRxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.2.48.1.2 | Columnpm253MesrclientRxpwrMeasPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the Client SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = … |
| 1.3.6.1.4.1.20044.13.3.3 | Nodepm253MesrLine | |||
| 1.3.6.1.4.1.20044.13.3.3.160 | Tablepm253MesrlineTempMeasTable | not-accessible | current | List of pm253MesrlineTempMeas Article |
| 1.3.6.1.4.1.20044.13.3.3.160.1 | Rowpm253MesrlineTempMeasEntry | not-accessible | current | Row definition for the pm253MesrlineTempMeas table |
| 1.3.6.1.4.1.20044.13.3.3.160.1.1 | Columnpm253MesrlineTempMeasIndex | read-only | current | Index definition for the pm253MesrlineTempMeas table |
| 1.3.6.1.4.1.20044.13.3.3.160.1.2 | Columnpm253MesrlineTempMeasPortn | read-only | current | Line SFP Temperature :This OID gives the temperature value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C)… |
| 1.3.6.1.4.1.20044.13.3.3.161 | Tablepm253MesrlineVoltMeasTable | not-accessible | current | List of pm253MesrlineVoltMeas Article |
| 1.3.6.1.4.1.20044.13.3.3.161.1 | Rowpm253MesrlineVoltMeasEntry | not-accessible | current | Row definition for the pm253MesrlineVoltMeas table |
| 1.3.6.1.4.1.20044.13.3.3.161.1.1 | Columnpm253MesrlineVoltMeasIndex | read-only | current | Index definition for the pm253MesrlineVoltMeas table |
| 1.3.6.1.4.1.20044.13.3.3.161.1.2 | Columnpm253MesrlineVoltMeasPortn | read-only | current | Line SFP Power Supply :This OID gives the 3V3 voltage value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) … |
| 1.3.6.1.4.1.20044.13.3.3.162 | Tablepm253MesrlineBiasMeasTable | not-accessible | current | List of pm253MesrlineBiasMeas Article |
| 1.3.6.1.4.1.20044.13.3.3.162.1 | Rowpm253MesrlineBiasMeasEntry | not-accessible | current | Row definition for the pm253MesrlineBiasMeas table |
| 1.3.6.1.4.1.20044.13.3.3.162.1.1 | Columnpm253MesrlineBiasMeasIndex | read-only | current | Index definition for the pm253MesrlineBiasMeas table |
| 1.3.6.1.4.1.20044.13.3.3.162.1.2 | Columnpm253MesrlineBiasMeasPortn | read-only | current | Line SFP Laser Bias :This OID gives the bias value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This m… |
| 1.3.6.1.4.1.20044.13.3.3.163 | Tablepm253MesrlineTxpwrMeasTable | not-accessible | current | List of pm253MesrlineTxpwrMeas Article |
| 1.3.6.1.4.1.20044.13.3.3.163.1 | Rowpm253MesrlineTxpwrMeasEntry | not-accessible | current | Row definition for the pm253MesrlineTxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.3.163.1.1 | Columnpm253MesrlineTxpwrMeasIndex | read-only | current | Index definition for the pm253MesrlineTxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.3.163.1.2 | Columnpm253MesrlineTxpwrMeasPortn | read-only | current | Line SFP Tx Power :This OID gives the transmit power value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = d… |
| 1.3.6.1.4.1.20044.13.3.3.164 | Tablepm253MesrlineRxpwrMeasTable | not-accessible | current | List of pm253MesrlineRxpwrMeas Article |
| 1.3.6.1.4.1.20044.13.3.3.164.1 | Rowpm253MesrlineRxpwrMeasEntry | not-accessible | current | Row definition for the pm253MesrlineRxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.3.164.1.1 | Columnpm253MesrlineRxpwrMeasIndex | read-only | current | Index definition for the pm253MesrlineRxpwrMeas table |
| 1.3.6.1.4.1.20044.13.3.3.164.1.2 | Columnpm253MesrlineRxpwrMeasPortn | read-only | current | Line SFP Rx Power :This OID gives the receive power value of the Line SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm)… |
| 1.3.6.1.4.1.20044.13.4 | Nodepm253counters | |||
| 1.3.6.1.4.1.20044.13.4.1 | Nodepm253CntOther | |||
| 1.3.6.1.4.1.20044.13.4.2 | Nodepm253CntPort | |||
| 1.3.6.1.4.1.20044.13.4.2.16 | Tablepm253CntclientUpRaRemCntTable | not-accessible | current | List of pm253CntclientUpRaRemCnt Article |
| 1.3.6.1.4.1.20044.13.4.2.16.1 | Rowpm253CntclientUpRaRemCntEntry | not-accessible | current | Row definition for the pm253CntclientUpRaRemCnt table |
| 1.3.6.1.4.1.20044.13.4.2.16.1.1 | Columnpm253CntclientUpRaRemCntIndex | read-only | current | Index definition for the pm253CntclientUpRaRemCnt table |
| 1.3.6.1.4.1.20044.13.4.2.16.1.2 | Columnpm253CntclientUpRaRemCntValuePortn | read-only | current | Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
| 1.3.6.1.4.1.20044.13.4.2.16.1.3 | Columnpm253CntclientUpRaRemCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.2.16.1.4 | Columnpm253CntclientUpRaRemCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.2.24 | Tablepm253CntclientUpRaInsCntTable | not-accessible | current | List of pm253CntclientUpRaInsCnt Article |
| 1.3.6.1.4.1.20044.13.4.2.24.1 | Rowpm253CntclientUpRaInsCntEntry | not-accessible | current | Row definition for the pm253CntclientUpRaInsCnt table |
| 1.3.6.1.4.1.20044.13.4.2.24.1.1 | Columnpm253CntclientUpRaInsCntIndex | read-only | current | Index definition for the pm253CntclientUpRaInsCnt table |
| 1.3.6.1.4.1.20044.13.4.2.24.1.2 | Columnpm253CntclientUpRaInsCntValuePortn | read-only | current | Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
| 1.3.6.1.4.1.20044.13.4.2.24.1.3 | Columnpm253CntclientUpRaInsCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.2.24.1.4 | Columnpm253CntclientUpRaInsCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.2.32 | Tablepm253CntclientUpDispErrCntTable | not-accessible | current | List of pm253CntclientUpDispErrCnt Article |
| 1.3.6.1.4.1.20044.13.4.2.32.1 | Rowpm253CntclientUpDispErrCntEntry | not-accessible | current | Row definition for the pm253CntclientUpDispErrCnt table |
| 1.3.6.1.4.1.20044.13.4.2.32.1.1 | Columnpm253CntclientUpDispErrCntIndex | read-only | current | Index definition for the pm253CntclientUpDispErrCnt table |
| 1.3.6.1.4.1.20044.13.4.2.32.1.2 | Columnpm253CntclientUpDispErrCntValuePortn | read-only | current | Client Input Errors :This counter is incremented each time a running disparity error or a 10b/8b decoding violation is detected on the Client input stream <Hel… |
| 1.3.6.1.4.1.20044.13.4.2.32.1.3 | Columnpm253CntclientUpDispErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the 10B/8B decoding violations counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.2.32.1.4 | Columnpm253CntclientUpDispErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a 10B/8B decoding violations counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.2.40 | Tablepm253CntclientUpTimCntTable | not-accessible | current | List of pm253CntclientUpTimCnt Article |
| 1.3.6.1.4.1.20044.13.4.2.40.1 | Rowpm253CntclientUpTimCntEntry | not-accessible | current | Row definition for the pm253CntclientUpTimCnt table |
| 1.3.6.1.4.1.20044.13.4.2.40.1.1 | Columnpm253CntclientUpTimCntIndex | read-only | current | Index definition for the pm253CntclientUpTimCnt table |
| 1.3.6.1.4.1.20044.13.4.2.40.1.2 | Columnpm253CntclientUpTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.13.4.2.40.1.3 | Columnpm253CntclientUpTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.2.40.1.4 | Columnpm253CntclientUpTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.2.64 | Tablepm253CntclientDwCbipCntTable | not-accessible | current | List of pm253CntclientDwCbipCnt Article |
| 1.3.6.1.4.1.20044.13.4.2.64.1 | Rowpm253CntclientDwCbipCntEntry | not-accessible | current | Row definition for the pm253CntclientDwCbipCnt table |
| 1.3.6.1.4.1.20044.13.4.2.64.1.1 | Columnpm253CntclientDwCbipCntIndex | read-only | current | Index definition for the pm253CntclientDwCbipCnt table |
| 1.3.6.1.4.1.20044.13.4.2.64.1.2 | Columnpm253CntclientDwCbipCntValuePortn | read-only | current | Client CBIP Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of C… |
| 1.3.6.1.4.1.20044.13.4.2.64.1.3 | Columnpm253CntclientDwCbipCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.2.64.1.4 | Columnpm253CntclientDwCbipCntOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.2.72 | Tablepm253CntclientDwTimCntTable | not-accessible | current | List of pm253CntclientDwTimCnt Article |
| 1.3.6.1.4.1.20044.13.4.2.72.1 | Rowpm253CntclientDwTimCntEntry | not-accessible | current | Row definition for the pm253CntclientDwTimCnt table |
| 1.3.6.1.4.1.20044.13.4.2.72.1.1 | Columnpm253CntclientDwTimCntIndex | read-only | current | Index definition for the pm253CntclientDwTimCnt table |
| 1.3.6.1.4.1.20044.13.4.2.72.1.2 | Columnpm253CntclientDwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.13.4.2.72.1.3 | Columnpm253CntclientDwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.2.72.1.4 | Columnpm253CntclientDwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.3 | Nodepm253CntLine | |||
| 1.3.6.1.4.1.20044.13.4.3.152 | Tablepm253CntlineDfrmB1ErrCntTable | not-accessible | current | List of pm253CntlineDfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.13.4.3.152.1 | Rowpm253CntlineDfrmB1ErrCntEntry | not-accessible | current | Row definition for the pm253CntlineDfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.13.4.3.152.1.1 | Columnpm253CntlineDfrmB1ErrCntIndex | read-only | current | Index definition for the pm253CntlineDfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.13.4.3.152.1.2 | Columnpm253CntlineDfrmB1ErrCntValuePortn | read-only | current | Line B1 Errors :This counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 errors on… |
| 1.3.6.1.4.1.20044.13.4.3.152.1.3 | Columnpm253CntlineDfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.3.152.1.4 | Columnpm253CntlineDfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.3.153 | Tablepm253CntlineDfrmTimCntTable | not-accessible | current | List of pm253CntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.13.4.3.153.1 | Rowpm253CntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm253CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.13.4.3.153.1.1 | Columnpm253CntlineDfrmTimCntIndex | read-only | current | Index definition for the pm253CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.13.4.3.153.1.2 | Columnpm253CntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.13.4.3.153.1.3 | Columnpm253CntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.13.4.3.153.1.4 | Columnpm253CntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.13.4.259 | Scalarpm253CntCountersReset | read-write | current | Counters Reset : This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.13.4.260 | Scalarpm253CntCountersStop | read-write | current | Counters stop : This OID stops all the counters |
| 1.3.6.1.4.1.20044.13.6 | Nodepm253controlsWrite | |||
| 1.3.6.1.4.1.20044.13.6.1 | Nodepm253CtrlOther | |||
| 1.3.6.1.4.1.20044.13.6.1.1 | Nodepm253CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.13.6.1.1.1 | Scalarpm253CtrlConf1Load1 | read-write | current | Load Configuration Tables Set N�1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.13.6.1.1.2 | Scalarpm253CtrlConf2Load1 | read-write | current | Load Configuration Tables Set N�2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.13.6.1.1.10 | Scalarpm253CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.13.6.1.1.14 | Scalarpm253CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.13.6.1.4 | Nodepm253Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.13.6.1.4.1 | Scalarpm253CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.13.6.1.4.2 | Scalarpm253CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.13.6.1.5 | Nodepm253CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.13.6.1.5.2 | Scalarpm253CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.13.6.1.5.3 | Scalarpm253CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.13.6.1.5.5 | Scalarpm253CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.13.6.1.5.6 | Scalarpm253CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.13.6.1.6 | Nodepm253CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.13.6.1.6.1 | Scalarpm253CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.13.6.1.6.5 | Scalarpm253CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.13.6.1.6.6 | Scalarpm253CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.13.6.1.6.7 | Scalarpm253CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.13.6.1.6.8 | Scalarpm253CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.13.6.1.192 | Nodepm253CtrlledTest | |||
| 1.3.6.1.4.1.20044.13.6.1.192.1 | Scalarpm253CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.13.6.1.192.2 | Scalarpm253CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.13.6.1.192.3 | Scalarpm253CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.13.6.1.193 | Nodepm253CtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.13.6.1.193.1 | Scalarpm253CtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM253 Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.13.6.1.194 | Nodepm253CtrlclientPortMode | |||
| 1.3.6.1.4.1.20044.13.6.1.194.1 | Scalarpm253CtrlClientPortMode | read-write | current | OC48 (check) - GbE (uncheck) Mode :This OID sets the client port in 2xGbE/GFC mode (1) or 1xOC748/STM16 mode (2) <Help> This control defines the working mode o… |
| 1.3.6.1.4.1.20044.13.6.1.197 | Nodepm253CtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.13.6.1.197.1 | Scalarpm253CtrlMaintenanceMode | read-write | current | Module Maintenance Mode :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.13.6.1.198 | Nodepm253CtrldccEnable | |||
| 1.3.6.1.4.1.20044.13.6.1.198.1 | Scalarpm253CtrlDccEnable | read-write | current | DCC Enable :This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
| 1.3.6.1.4.1.20044.13.6.2 | Nodepm253CtrlPort | |||
| 1.3.6.1.4.1.20044.13.6.2.16 | Tablepm253CtrlclientAccessLoopTable | not-accessible | current | List of pm253CtrlclientAccessLoop Article |
| 1.3.6.1.4.1.20044.13.6.2.16.1 | Rowpm253CtrlclientAccessLoopEntry | not-accessible | current | Row definition for the pm253CtrlclientAccessLoop table |
| 1.3.6.1.4.1.20044.13.6.2.16.1.1 | Columnpm253CtrlclientAccessLoopIndex | read-only | current | Index definition for the pm253CtrlclientAccessLoop table |
| 1.3.6.1.4.1.20044.13.6.2.16.1.2 | Columnpm253CtrlclientAccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.13.6.2.18 | Tablepm253CtrlclientOosModeTable | not-accessible | current | List of pm253CtrlclientOosMode Article |
| 1.3.6.1.4.1.20044.13.6.2.18.1 | Rowpm253CtrlclientOosModeEntry | not-accessible | current | Row definition for the pm253CtrlclientOosMode table |
| 1.3.6.1.4.1.20044.13.6.2.18.1.1 | Columnpm253CtrlclientOosModeIndex | read-only | current | Index definition for the pm253CtrlclientOosMode table |
| 1.3.6.1.4.1.20044.13.6.2.18.1.2 | Columnpm253CtrlclientOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.13.6.2.20 | Tablepm253CtrlclientSfpOnOffCtrlTable | not-accessible | current | List of pm253CtrlclientSfpOnOffCtrl Article |
| 1.3.6.1.4.1.20044.13.6.2.20.1 | Rowpm253CtrlclientSfpOnOffCtrlEntry | not-accessible | current | Row definition for the pm253CtrlclientSfpOnOffCtrl table |
| 1.3.6.1.4.1.20044.13.6.2.20.1.1 | Columnpm253CtrlclientSfpOnOffCtrlIndex | read-only | current | Index definition for the pm253CtrlclientSfpOnOffCtrl table |
| 1.3.6.1.4.1.20044.13.6.2.20.1.2 | Columnpm253CtrlclientSfpOnOffCtrlPortn | read-write | current | Client SFP Laser Shutdown :This OID switches off the Client SFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.13.6.2.21 | Tablepm253CtrlclientCsfUpInsTable | not-accessible | current | List of pm253CtrlclientCsfUpIns Article |
| 1.3.6.1.4.1.20044.13.6.2.21.1 | Rowpm253CtrlclientCsfUpInsEntry | not-accessible | current | Row definition for the pm253CtrlclientCsfUpIns table |
| 1.3.6.1.4.1.20044.13.6.2.21.1.1 | Columnpm253CtrlclientCsfUpInsIndex | read-only | current | Index definition for the pm253CtrlclientCsfUpIns table |
| 1.3.6.1.4.1.20044.13.6.2.21.1.2 | Columnpm253CtrlclientCsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.13.6.2.22 | Tablepm253CtrlclientCaisDwInsTable | not-accessible | current | List of pm253CtrlclientCaisDwIns Article |
| 1.3.6.1.4.1.20044.13.6.2.22.1 | Rowpm253CtrlclientCaisDwInsEntry | not-accessible | current | Row definition for the pm253CtrlclientCaisDwIns table |
| 1.3.6.1.4.1.20044.13.6.2.22.1.1 | Columnpm253CtrlclientCaisDwInsIndex | read-only | current | Index definition for the pm253CtrlclientCaisDwIns table |
| 1.3.6.1.4.1.20044.13.6.2.22.1.2 | Columnpm253CtrlclientCaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.13.6.2.26 | Tablepm253CtrlclientAccessTermLoopTable | not-accessible | current | List of pm253CtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.13.6.2.26.1 | Rowpm253CtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm253CtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.13.6.2.26.1.1 | Columnpm253CtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm253CtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.13.6.2.26.1.2 | Columnpm253CtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.13.6.2.48 | Tablepm253CtrlProtocolTable | not-accessible | current | List of pm253CtrlProtocol Article |
| 1.3.6.1.4.1.20044.13.6.2.48.1 | Rowpm253CtrlProtocolEntry | not-accessible | current | Row definition for the pm253CtrlProtocol table |
| 1.3.6.1.4.1.20044.13.6.2.48.1.1 | Columnpm253CtrlProtocolIndex | read-only | current | Index definition for the pm253CtrlProtocol table |
| 1.3.6.1.4.1.20044.13.6.2.48.1.2 | Columnpm253CtrlProtocolPortn | read-write | current | Client Protocol: This OID sets the protocol of the Client port. |
| 1.3.6.1.4.1.20044.13.6.2.271 | Tablepm253CtrlclientResetAllCountTable | not-accessible | current | List of pm253CtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.13.6.2.271.1 | Rowpm253CtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm253CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.13.6.2.271.1.1 | Columnpm253CtrlclientResetAllCountIndex | read-only | current | Index definition for the pm253CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.13.6.2.271.1.2 | Columnpm253CtrlclientResetAllCountsPortn | read-write | deprecated | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.13.6.3 | Nodepm253CtrlLine | |||
| 1.3.6.1.4.1.20044.13.6.3.65 | Nodepm253Ctrlsts48c24c | |||
| 1.3.6.1.4.1.20044.13.6.3.65.1 | Scalarpm253CtrlSts24cMode | read-write | current | STS24c (check) - STS48c (uncheck) :This OID defines the STM16/OC48 lines format. 1xSTS48c (0) or 2xSTS24c (1). <Help> This control defines the payload mapping … |
| 1.3.6.1.4.1.20044.13.6.3.67 | Nodepm253CtrllineMsAis | |||
| 1.3.6.1.4.1.20044.13.6.3.67.1 | Scalarpm253CtrlLineMsAis | read-write | current | Insert MS-AIS/L-AIS On Lines Output :This OID, when set, inserts an MS-AIS/L-AIS in the two outgoing STM-16/OC-48 signals. |
| 1.3.6.1.4.1.20044.13.6.3.70 | Tablepm253CtrllineUpS1Table | not-accessible | current | List of pm253CtrllineUpS1 Article |
| 1.3.6.1.4.1.20044.13.6.3.70.1 | Rowpm253CtrllineUpS1Entry | not-accessible | current | Row definition for the pm253CtrllineUpS1 table |
| 1.3.6.1.4.1.20044.13.6.3.70.1.1 | Columnpm253CtrllineUpS1Index | read-only | current | Index definition for the pm253CtrllineUpS1 table |
| 1.3.6.1.4.1.20044.13.6.3.70.1.2 | Columnpm253CtrllineUpS1Portn | read-write | current | S1 Value Inserted On Lines Output :The value to be written in the S1 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID |
| 1.3.6.1.4.1.20044.13.6.3.71 | Tablepm253CtrllineUpK1Table | not-accessible | current | List of pm253CtrllineUpK1 Article |
| 1.3.6.1.4.1.20044.13.6.3.71.1 | Rowpm253CtrllineUpK1Entry | not-accessible | current | Row definition for the pm253CtrllineUpK1 table |
| 1.3.6.1.4.1.20044.13.6.3.71.1.1 | Columnpm253CtrllineUpK1Index | read-only | current | Index definition for the pm253CtrllineUpK1 table |
| 1.3.6.1.4.1.20044.13.6.3.71.1.2 | Columnpm253CtrllineUpK1Portn | read-write | current | K1 Value Inserted On Lines Output :The value to be written in the K1 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID |
| 1.3.6.1.4.1.20044.13.6.3.72 | Tablepm253CtrllineUpK2Table | not-accessible | current | List of pm253CtrllineUpK2 Article |
| 1.3.6.1.4.1.20044.13.6.3.72.1 | Rowpm253CtrllineUpK2Entry | not-accessible | current | Row definition for the pm253CtrllineUpK2 table |
| 1.3.6.1.4.1.20044.13.6.3.72.1.1 | Columnpm253CtrllineUpK2Index | read-only | current | Index definition for the pm253CtrllineUpK2 table |
| 1.3.6.1.4.1.20044.13.6.3.72.1.2 | Columnpm253CtrllineUpK2Portn | read-write | current | K2 Value Inserted On Lines Output :The value to be written in the K2 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID |
| 1.3.6.1.4.1.20044.13.6.3.73 | Nodepm253CtrlProtMgnt | |||
| 1.3.6.1.4.1.20044.13.6.3.73.1 | Scalarpm253CtrlLineNumber | read-write | current | Switch to Line Port : This OID sets the active line number |
| 1.3.6.1.4.1.20044.13.6.3.73.2 | Scalarpm253CtrlProtMode | read-write | current | Line Switch Mode (Auto Or Manual) :This OID selects the manual (1) or automatic (0) switch method |
| 1.3.6.1.4.1.20044.13.6.3.74 | Tablepm253CtrllineOosModeTable | not-accessible | current | List of pm253CtrllineOosMode Article |
| 1.3.6.1.4.1.20044.13.6.3.74.1 | Rowpm253CtrllineOosModeEntry | not-accessible | current | Row definition for the pm253CtrllineOosMode table |
| 1.3.6.1.4.1.20044.13.6.3.74.1.1 | Columnpm253CtrllineOosModeIndex | read-only | current | Index definition for the pm253CtrllineOosMode table |
| 1.3.6.1.4.1.20044.13.6.3.74.1.2 | Columnpm253CtrllineOosModePortn | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.13.6.3.75 | Nodepm253Ctrlk1K2Mgnt | |||
| 1.3.6.1.4.1.20044.13.6.3.75.1 | Scalarpm253CtrlK1K2Transparent | read-write | current | Transparent Client Mode (OC48 Mode) :This OID enables the transparent transport of the OC48 client port. When not sets, the value of S1, K1 and K2 bytes are ad… |
| 1.3.6.1.4.1.20044.13.6.3.90 | Nodepm253CtrlApsForceMode | |||
| 1.3.6.1.4.1.20044.13.6.3.90.1 | Scalarpm253CtrlApsForceModeLine1 | read-write | current | Force Switch To Line 1 (protect) :This OID performs a forced switch to the line 1 (protect line) |
| 1.3.6.1.4.1.20044.13.6.3.90.2 | Scalarpm253CtrlApsForceModeLine2 | read-write | current | Force Switch To Line 2 (working) :This OID performs a forced switch to the line 2 (working line) |
| 1.3.6.1.4.1.20044.13.6.3.91 | Nodepm253CtrlApsManualMode | |||
| 1.3.6.1.4.1.20044.13.6.3.91.1 | Scalarpm253CtrlApsManualModeLine1 | read-write | current | Manual Switch To Line 1 (protect) :This OID performs a manual switch to the line 1 (protect line) |
| 1.3.6.1.4.1.20044.13.6.3.91.2 | Scalarpm253CtrlApsManualModeLine2 | read-write | current | Manual Switch To Line 2 (working) :This OID performs a manual switch to the line 2 (working line) |
| 1.3.6.1.4.1.20044.13.6.3.92 | Nodepm253CtrlapsOtherModes | |||
| 1.3.6.1.4.1.20044.13.6.3.92.1 | Scalarpm253CtrlLockout | read-write | current | Lockout From Protection :This OID sets the APS in 'Lockout from protection' mode <Help> This control sets the APS mode to Lockout from Protection |
| 1.3.6.1.4.1.20044.13.6.3.92.2 | Scalarpm253CtrlClear | read-write | current | APS Clear :This OID clears any APS command previously set <Help> This control sets the APS mode to Clear. |
| 1.3.6.1.4.1.20044.13.6.3.160 | Tablepm253CtrllineAccessLoopTable | not-accessible | current | List of pm253CtrllineAccessLoop Article |
| 1.3.6.1.4.1.20044.13.6.3.160.1 | Rowpm253CtrllineAccessLoopEntry | not-accessible | current | Row definition for the pm253CtrllineAccessLoop table |
| 1.3.6.1.4.1.20044.13.6.3.160.1.1 | Columnpm253CtrllineAccessLoopIndex | read-only | current | Index definition for the pm253CtrllineAccessLoop table |
| 1.3.6.1.4.1.20044.13.6.3.160.1.2 | Columnpm253CtrllineAccessLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.13.6.3.161 | Tablepm253CtrllineLoopTransceiverTable | not-accessible | current | List of pm253CtrllineLoopTransceiver Article |
| 1.3.6.1.4.1.20044.13.6.3.161.1 | Rowpm253CtrllineLoopTransceiverEntry | not-accessible | current | Row definition for the pm253CtrllineLoopTransceiver table |
| 1.3.6.1.4.1.20044.13.6.3.161.1.1 | Columnpm253CtrllineLoopTransceiverIndex | read-only | current | Index definition for the pm253CtrllineLoopTransceiver table |
| 1.3.6.1.4.1.20044.13.6.3.161.1.2 | Columnpm253CtrllineLoopTransceiverPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.13.6.3.162 | Tablepm253CtrllineSfpOnOffCtrlTable | not-accessible | current | List of pm253CtrllineSfpOnOffCtrl Article |
| 1.3.6.1.4.1.20044.13.6.3.162.1 | Rowpm253CtrllineSfpOnOffCtrlEntry | not-accessible | current | Row definition for the pm253CtrllineSfpOnOffCtrl table |
| 1.3.6.1.4.1.20044.13.6.3.162.1.1 | Columnpm253CtrllineSfpOnOffCtrlIndex | read-only | current | Index definition for the pm253CtrllineSfpOnOffCtrl table |
| 1.3.6.1.4.1.20044.13.6.3.162.1.2 | Columnpm253CtrllineSfpOnOffCtrlPortn | read-write | current | Line SFP Laser Shutdown :This OID switches off the Line SFP. <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.13.6.3.335 | Tablepm253CtrllineResetAllCountTable | not-accessible | current | List of pm253CtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.13.6.3.335.1 | Rowpm253CtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm253CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.13.6.3.335.1.1 | Columnpm253CtrllineResetAllCountIndex | read-only | current | Index definition for the pm253CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.13.6.3.335.1.2 | Columnpm253CtrllineResetAllCountsPortn | read-write | deprecated | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.13.7 | Nodepm253ri | |||
| 1.3.6.1.4.1.20044.13.7.1 | Nodepm253riTable | |||
| 1.3.6.1.4.1.20044.13.7.1.1 | Tablepm253RinvClientTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.13.7.1.1.1 | Rowpm253RinvClientEntry | not-accessible | current | Row definition for the Client SFP table |
| 1.3.6.1.4.1.20044.13.7.1.1.1.1 | Columnpm253RinvClientIndex | read-only | current | Index for Client SFP table |
| 1.3.6.1.4.1.20044.13.7.1.1.1.2 | Columnpm253RinvSfpClient | read-only | current | Inventory for the SFP: This OID contains the inventory for the Client SFP |
| 1.3.6.1.4.1.20044.13.7.1.2 | Tablepm253RinvLineTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.13.7.1.2.1 | Rowpm253RinvLineEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.13.7.1.2.1.1 | Columnpm253RinvLineIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.13.7.1.2.1.2 | Columnpm253RinvsfpLine | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.13.7.2 | Scalarpm253RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.13.7.3 | Scalarpm253RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.13.7.4 | Scalarpm253RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.13.7.5 | Scalarpm253RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.13.7.6 | Scalarpm253RinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.13.8 | Nodepm253download | |||
| 1.3.6.1.4.1.20044.13.8.1 | Nodepm253DwlOther | |||
| 1.3.6.1.4.1.20044.13.8.1.0 | Nodepm253DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.13.8.1.0.1 | Scalarpm253DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the PM last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.13.8.1.0.2 | Scalarpm253DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the PM last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.13.8.1.1 | Nodepm253DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.13.8.1.1.1 | Scalarpm253DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the PM is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.13.8.1.1.2 | Scalarpm253DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the PM is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.13.8.1.1.5 | Scalarpm253DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.13.8.1.1.6 | Scalarpm253DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.13.8.1.2 | Nodepm253DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.13.8.1.2.1 | Scalarpm253DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the PM is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.13.8.1.2.2 | Scalarpm253DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the PM is working on GW bank 2 |
| 1.3.6.1.4.1.20044.13.8.1.2.3 | Scalarpm253DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the PM is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.13.8.1.2.4 | Scalarpm253DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the PM is working on GW bank 4 |
| 1.3.6.1.4.1.20044.13.8.1.2.5 | Scalarpm253DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.13.8.1.2.6 | Scalarpm253DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank2 |
| 1.3.6.1.4.1.20044.13.8.1.2.7 | Scalarpm253DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.13.8.1.2.8 | Scalarpm253DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank4 |
| 1.3.6.1.4.1.20044.13.8.2 | Nodepm253DwlPort | |||
| 1.3.6.1.4.1.20044.13.8.3 | Nodepm253DwlLine | |||
| 1.3.6.1.4.1.20044.13.9 | Nodepm253Config | |||
| 1.3.6.1.4.1.20044.13.9.1 | Nodepm253CfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.13.9.1.1 | Tablepm253CfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.13.9.1.1.1 | Rowpm253CfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.13.9.1.1.1.1 | Columnpm253CfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.13.9.1.1.1.3 | Columnpm253CfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables Client Port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.13.9.1.1.1.4 | Columnpm253CfgSts24cContribPortn | read-write | current | Sts24c contributors on Client Port :This register selects the contributors of STS24c to downstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.13.9.1.1.1.9 | Columnpm253CfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the Client Port. |
| 1.3.6.1.4.1.20044.13.9.1.1.1.10 | Columnpm253CfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the Client Port. |
| 1.3.6.1.4.1.20044.13.9.1.1.1.18 | Columnpm253CfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on Client Port. |
| 1.3.6.1.4.1.20044.13.9.1.1.1.19 | Columnpm253CfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on Client Port. |
| 1.3.6.1.4.1.20044.13.9.1.1.1.22 | Columnpm253CfgDownLineIoAlmPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on Client Port. |
| 1.3.6.1.4.1.20044.13.9.2 | Nodepm253CfgStartup | |||
| 1.3.6.1.4.1.20044.13.9.2.1 | Tablepm253CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.13.9.2.1.1 | Rowpm253CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.13.9.2.1.1.1 | Columnpm253CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.13.9.2.1.1.3 | Columnpm253CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the client port. |
| 1.3.6.1.4.1.20044.13.9.2.1.1.4 | Columnpm253CfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the client port. |
| 1.3.6.1.4.1.20044.13.9.2.1.1.6 | Columnpm253CfgPortsOptionsPortn | read-write | deprecated | Default Options on Client Port :This register configures the default options on the client port |
| 1.3.6.1.4.1.20044.13.9.2.2 | Nodepm253tablelineStartup | |||
| 1.3.6.1.4.1.20044.13.9.2.2.2 | Scalarpm253CfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.13.9.2.2.6 | Scalarpm253CfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.13.9.2.2.7 | Scalarpm253CfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.13.9.2.2.9 | Scalarpm253CfglineOptions | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.13.9.3 | Nodepm253CfgLabels | |||
| 1.3.6.1.4.1.20044.13.9.3.1 | Tablepm253CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.13.9.3.1.1 | Rowpm253CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.13.9.3.1.1.1 | Columnpm253CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.13.9.3.1.1.3 | Columnpm253CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.13.9.3.2 | Tablepm253CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.13.9.3.2.1 | Rowpm253CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.13.9.3.2.1.1 | Columnpm253CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.13.9.3.2.1.3 | Columnpm253CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.13.9.257 | Scalarpm253CfgWriteConfiguration | read-write | current | Write configuration to PM: This OID, when sets, write the complete configuration to the PM. |
| 1.3.6.1.4.1.20044.13.10 | Nodepm253traps | |||
| 1.3.6.1.4.1.20044.13.10.2 | Scalarpm253TrapPortNumber | read-only | current | Last port which generated a trap |
| 1.3.6.1.4.1.20044.13.10.3 | Scalarpm253TrapBoardNumber | read-only | current | Last module which generated a trap |
| 1.3.6.1.4.1.20044.13.10.4 | Scalarpm253TrapLineNumber | read-only | current | Last line which generated a trap |
| 1.3.6.1.4.1.20044.13.10.30 | Notificationpm253LineTrapNotUrgentGoesOn | current | Not urgent line default is activated | |
| 1.3.6.1.4.1.20044.13.10.31 | Notificationpm253LineTrapNotUrgentGoesOff | current | Not urgent line default disappeared | |
| 1.3.6.1.4.1.20044.13.10.32 | Notificationpm253LineTrapUrgentGoesOn | current | Urgent line default is activated | |
| 1.3.6.1.4.1.20044.13.10.33 | Notificationpm253LineTrapUrgentGoesOff | current | Urgent line default disappeared | |
| 1.3.6.1.4.1.20044.13.10.34 | Notificationpm253LineTrapCritGoesOn | current | Critical line default is activated | |
| 1.3.6.1.4.1.20044.13.10.35 | Notificationpm253LineTrapCritGoesOff | current | Critical line default disappeared | |
| 1.3.6.1.4.1.20044.13.10.40 | Notificationpm253PortnTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.13.10.41 | Notificationpm253PortnTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.13.10.42 | Notificationpm253PortnTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.13.10.43 | Notificationpm253PortnTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.13.10.44 | Notificationpm253PortnTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.13.10.45 | Notificationpm253PortnTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.13.11 | Nodepm253Monitoring | |||
| 1.3.6.1.4.1.20044.13.11.1 | Nodepm253MonOther | |||
| 1.3.6.1.4.1.20044.13.11.1.1 | Nodepm253MonSync | |||
| 1.3.6.1.4.1.20044.13.11.1.1.257 | Scalarpm253PerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.13.11.1.1.259 | Scalarpm253Perf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.13.11.1.1.260 | Scalarpm253Perf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.13.11.1.2 | Nodepm253MonTimeStamp | |||
| 1.3.6.1.4.1.20044.13.11.1.2.1 | Scalarpm253Perf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.13.11.1.2.2 | Scalarpm253Perf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.13.11.1.2.5 | Scalarpm253Perf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.13.11.1.2.6 | Scalarpm253Perf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.13.11.1.2.7 | Scalarpm253PerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.13.11.1.2.8 | Scalarpm253PerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.13.11.1.3 | Nodepm253MonRmon | |||
| 1.3.6.1.4.1.20044.13.11.1.3.359 | Scalarpm253MonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.13.11.1.3.360 | Scalarpm253MonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.13.11.2 | Nodepm253MonClient | |||
| 1.3.6.1.4.1.20044.13.11.2.4 | Nodepm253MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.13.11.2.4.16 | Tablepm253MonupRmonByteCntTable | not-accessible | current | List of pm253MonupRmonByteCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.16.1 | Rowpm253MonupRmonByteCntEntry | not-accessible | current | Row definition for the pm253MonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.16.1.1 | Columnpm253MonupRmonByteCntIndex | read-only | current | Index definition for the pm253MonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.16.1.2 | Columnpm253MonupRmonByteCntValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.13.11.2.4.16.1.3 | Columnpm253MonupRmonByteCntErrorPortn | read-only | current | Input Bytes Counter Error :This OID when set indicates the input Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.16.1.4 | Columnpm253MonupRmonByteCntOverloadPortn | read-only | current | Input Bytes Counter Overload :This OID when set indicates an input Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.24 | Tablepm253MonupRmonCrcErrorCntTable | not-accessible | current | List of pm253MonupRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.24.1 | Rowpm253MonupRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm253MonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.24.1.1 | Columnpm253MonupRmonCrcErrorCntIndex | read-only | current | Index definition for the pm253MonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.24.1.2 | Columnpm253MonupRmonCrcErrorCntValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port. <Help> This counter gives the number of CRC Errors rec… |
| 1.3.6.1.4.1.20044.13.11.2.4.24.1.3 | Columnpm253MonupRmonCrcErrorCntErrorPortn | read-only | current | Input CRC Errors Counter Error :This OID when set indicates the input CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.24.1.4 | Columnpm253MonupRmonCrcErrorCntOverloadPortn | read-only | current | Input CRC Errors Counter Overload :This OID when set indicates an input CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.32 | Tablepm253MonupRmonPacketsCntTable | not-accessible | current | List of pm253MonupRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.32.1 | Rowpm253MonupRmonPacketsCntEntry | not-accessible | current | Row definition for the pm253MonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.32.1.1 | Columnpm253MonupRmonPacketsCntIndex | read-only | current | Index definition for the pm253MonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.32.1.2 | Columnpm253MonupRmonPacketsCntValuePortn | read-only | current | Packets Counter On Client Input :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets re… |
| 1.3.6.1.4.1.20044.13.11.2.4.32.1.3 | Columnpm253MonupRmonPacketsCntErrorPortn | read-only | current | Input Packets Counter Error :This OID when set indicates the input Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.32.1.4 | Columnpm253MonupRmonPacketsCntOverloadPortn | read-only | current | Input Packets Counter Overload :This OID when set indicates an input Packets counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.40 | Tablepm253MonupRmonBroadcastCntTable | not-accessible | current | List of pm253MonupRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.40.1 | Rowpm253MonupRmonBroadcastCntEntry | not-accessible | current | Row definition for the pm253MonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.40.1.1 | Columnpm253MonupRmonBroadcastCntIndex | read-only | current | Index definition for the pm253MonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.40.1.2 | Columnpm253MonupRmonBroadcastCntValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port. <Help> This counter gives the number of … |
| 1.3.6.1.4.1.20044.13.11.2.4.40.1.3 | Columnpm253MonupRmonBroadcastCntErrorPortn | read-only | current | Input Broadcast Counter Error :This OID when set indicates the input Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.40.1.4 | Columnpm253MonupRmonBroadcastCntOverloadPortn | read-only | current | Input Broadcast Counter Overload :This OID when set indicates an input Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.48 | Tablepm253MonupRmonMulticastCntTable | not-accessible | current | List of pm253MonupRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.48.1 | Rowpm253MonupRmonMulticastCntEntry | not-accessible | current | Row definition for the pm253MonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.48.1.1 | Columnpm253MonupRmonMulticastCntIndex | read-only | current | Index definition for the pm253MonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.48.1.2 | Columnpm253MonupRmonMulticastCntValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port. <Help> This counter gives the number of … |
| 1.3.6.1.4.1.20044.13.11.2.4.48.1.3 | Columnpm253MonupRmonMulticastCntErrorPortn | read-only | current | Input Multicast Counter Error :This OID when set indicates the input Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.48.1.4 | Columnpm253MonupRmonMulticastCntOverloadPortn | read-only | current | Input Multicast Counter Overload :This OID when set indicates an input Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.56 | Tablepm253MonupRmonTimerCntTable | not-accessible | current | List of pm253MonupRmonTimerCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.56.1 | Rowpm253MonupRmonTimerCntEntry | not-accessible | current | Row definition for the pm253MonupRmonTimerCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.56.1.1 | Columnpm253MonupRmonTimerCntIndex | read-only | current | Index definition for the pm253MonupRmonTimerCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.56.1.2 | Columnpm253MonupRmonTimerCntValuePortn | read-only | current | RMON Timer On Client Input :This is the timing counter dedicated to the upstream RMON counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.13.11.2.4.56.1.3 | Columnpm253MonupRmonTimerCntErrorPortn | read-only | current | Input RMON Timer Error :This OID when set indicates the input RMON timer is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.56.1.4 | Columnpm253MonupRmonTimerCntOverloadPortn | read-only | current | Input RMON Timer Overload :This OID when set indicates an input RMON timer overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.64 | Tablepm253MonupRmonPauseFrameCntTable | not-accessible | current | List of pm253MonupRmonPauseFrameCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.64.1 | Rowpm253MonupRmonPauseFrameCntEntry | not-accessible | current | Row definition for the pm253MonupRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.64.1.1 | Columnpm253MonupRmonPauseFrameCntIndex | read-only | current | Index definition for the pm253MonupRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.64.1.2 | Columnpm253MonupRmonPauseFrameCntValuePortn | read-only | current | Pause Counter On Client Input :This counter is increased each time a Pause frame is received on the client port |
| 1.3.6.1.4.1.20044.13.11.2.4.64.1.3 | Columnpm253MonupRmonPauseFrameCntErrorPortn | read-only | current | Input Pause Counter Error :This OID when set indicates the input Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.64.1.4 | Columnpm253MonupRmonPauseFrameCntOverloadPortn | read-only | current | Input Pause Counter Overload :This OID when set indicates an input Pause counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.72 | Tablepm253MonupRmonDropFrameCntTable | not-accessible | current | List of pm253MonupRmonDropFrameCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.72.1 | Rowpm253MonupRmonDropFrameCntEntry | not-accessible | current | Row definition for the pm253MonupRmonDropFrameCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.72.1.1 | Columnpm253MonupRmonDropFrameCntIndex | read-only | current | Index definition for the pm253MonupRmonDropFrameCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.72.1.2 | Columnpm253MonupRmonDropFrameCntValuePortn | read-only | current | Drop Counter On Client Input :This counter is increased each time a Frame is dropped on the input client port |
| 1.3.6.1.4.1.20044.13.11.2.4.72.1.3 | Columnpm253MonupRmonDropFrameCntErrorPortn | read-only | current | Input Drop Counter Error :This OID when set indicates the input Drop counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.72.1.4 | Columnpm253MonupRmonDropFrameCntOverloadPortn | read-only | current | Input Drop Counter Overload :This OID when set indicates an input Drop counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.80 | Tablepm253MonupRmonBitsCntTable | not-accessible | current | List of pm253MonupRmonBitsCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.80.1 | Rowpm253MonupRmonBitsCntEntry | not-accessible | current | Row definition for the pm253MonupRmonBitsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.80.1.1 | Columnpm253MonupRmonBitsCntIndex | read-only | current | Index definition for the pm253MonupRmonBitsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.80.1.2 | Columnpm253MonupRmonBitsCntValuePortn | read-only | current | Bits Counter On Client Input :This counter is increased each time a bit is received on the input client port |
| 1.3.6.1.4.1.20044.13.11.2.4.80.1.3 | Columnpm253MonupRmonBitsCntErrorPortn | read-only | current | Input Bits Counter Error :This OID when set indicates the input Bits counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.80.1.4 | Columnpm253MonupRmonBitsCntOverloadPortn | read-only | current | Input Bits Counter Overload :This OID when set indicates an input Bits counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.88 | Tablepm253MonupRmonUnicastCntTable | not-accessible | current | List of pm253MonupRmonUnicastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.88.1 | Rowpm253MonupRmonUnicastCntEntry | not-accessible | current | Row definition for the pm253MonupRmonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.88.1.1 | Columnpm253MonupRmonUnicastCntIndex | read-only | current | Index definition for the pm253MonupRmonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.88.1.2 | Columnpm253MonupRmonUnicastCntValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on client input <Help> This counter gives the number of Unicast … |
| 1.3.6.1.4.1.20044.13.11.2.4.88.1.3 | Columnpm253MonupRmonUnicastCntErrorPortn | read-only | current | Input Unicast Counter Error :This OID when set indicates the input Drop counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.88.1.4 | Columnpm253MonupRmonUnicastCntOverloadPortn | read-only | current | Input Unicast Counter Overload :This OID when set indicates an input Drop counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.96 | Tablepm253MonupRmonNonUnicastCntTable | not-accessible | current | List of pm253MonupRmonNonUnicastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.96.1 | Rowpm253MonupRmonNonUnicastCntEntry | not-accessible | current | Row definition for the pm253MonupRmonNonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.96.1.1 | Columnpm253MonupRmonNonUnicastCntIndex | read-only | current | Index definition for the pm253MonupRmonNonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.96.1.2 | Columnpm253MonupRmonNonUnicastCntValuePortn | read-only | current | Client Input Not Unicast Packets :This counter is increased each time a Non Unicast packet is received on client input <Help> This counter gives the number of … |
| 1.3.6.1.4.1.20044.13.11.2.4.96.1.3 | Columnpm253MonupRmonNonUnicastCntErrorPortn | read-only | current | Input Non Unicast Counter Error :This OID when set indicates the input Bits counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.96.1.4 | Columnpm253MonupRmonNonUnicastCntOverloadPortn | read-only | current | Input Non Unicast Counter Overload :This OID when set indicates an input Bits counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.112 | Tablepm253MondwRmonByteCntTable | not-accessible | current | List of pm253MondwRmonByteCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.112.1 | Rowpm253MondwRmonByteCntEntry | not-accessible | current | Row definition for the pm253MondwRmonByteCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.112.1.1 | Columnpm253MondwRmonByteCntIndex | read-only | current | Index definition for the pm253MondwRmonByteCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.112.1.2 | Columnpm253MondwRmonByteCntValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port. <Help> This counter gives the number of bytes transmitt… |
| 1.3.6.1.4.1.20044.13.11.2.4.112.1.3 | Columnpm253MondwRmonByteCntErrorPortn | read-only | current | Output Bytes Counter Error :This OID when set indicates the output Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.112.1.4 | Columnpm253MondwRmonByteCntOverloadPortn | read-only | current | Output Bytes Counter Overload :This OID when set indicates an output Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.120 | Tablepm253MondwRmonCrcErrorCntTable | not-accessible | current | List of pm253MondwRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.120.1 | Rowpm253MondwRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm253MondwRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.120.1.1 | Columnpm253MondwRmonCrcErrorCntIndex | read-only | current | Index definition for the pm253MondwRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.120.1.2 | Columnpm253MondwRmonCrcErrorCntValuePortn | read-only | current | CRC Errors Counter On Client Output :This counter is increased each time a CRC error is detected on the output client port <Help> This counter gives the number… |
| 1.3.6.1.4.1.20044.13.11.2.4.120.1.3 | Columnpm253MondwRmonCrcErrorCntErrorPortn | read-only | current | Output CRC Errors Counter Error :This OID when set indicates the output CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.120.1.4 | Columnpm253MondwRmonCrcErrorCntOverloadPortn | read-only | current | Output CRC Errors Counter Overload :This OID when set indicates an output CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.128 | Tablepm253MondwRmonPacketsCntTable | not-accessible | current | List of pm253MondwRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.128.1 | Rowpm253MondwRmonPacketsCntEntry | not-accessible | current | Row definition for the pm253MondwRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.128.1.1 | Columnpm253MondwRmonPacketsCntIndex | read-only | current | Index definition for the pm253MondwRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.128.1.2 | Columnpm253MondwRmonPacketsCntValuePortn | read-only | current | Packets Counter On Client Output :This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packe… |
| 1.3.6.1.4.1.20044.13.11.2.4.128.1.3 | Columnpm253MondwRmonPacketsCntErrorPortn | read-only | current | Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.128.1.4 | Columnpm253MondwRmonPacketsCntOverloadPortn | read-only | current | Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.136 | Tablepm253MondwRmonBroadcastCntTable | not-accessible | current | List of pm253MondwRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.136.1 | Rowpm253MondwRmonBroadcastCntEntry | not-accessible | current | Row definition for the pm253MondwRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.136.1.1 | Columnpm253MondwRmonBroadcastCntIndex | read-only | current | Index definition for the pm253MondwRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.136.1.2 | Columnpm253MondwRmonBroadcastCntValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port. <Help> This counter gives the number… |
| 1.3.6.1.4.1.20044.13.11.2.4.136.1.3 | Columnpm253MondwRmonBroadcastCntErrorPortn | read-only | current | Output Broadcast Counter Error :This OID when set indicates the output Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.136.1.4 | Columnpm253MondwRmonBroadcastCntOverloadPortn | read-only | current | Output Broadcast Counter Overload :This OID when set indicates an output Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.144 | Tablepm253MondwRmonMulticastCntTable | not-accessible | current | List of pm253MondwRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.144.1 | Rowpm253MondwRmonMulticastCntEntry | not-accessible | current | Row definition for the pm253MondwRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.144.1.1 | Columnpm253MondwRmonMulticastCntIndex | read-only | current | Index definition for the pm253MondwRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.144.1.2 | Columnpm253MondwRmonMulticastCntValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is tra,smitted on the client port. <Help> This counter gives the number… |
| 1.3.6.1.4.1.20044.13.11.2.4.144.1.3 | Columnpm253MondwRmonMulticastCntErrorPortn | read-only | current | Output Multicast Counter Error :This OID when set indicates the output Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.144.1.4 | Columnpm253MondwRmonMulticastCntOverloadPortn | read-only | current | Output Multicast Counter Overload :This OID when set indicates an output Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.152 | Tablepm253MondwRmonPauseFrameCntTable | not-accessible | current | List of pm253MondwRmonPauseFrameCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.152.1 | Rowpm253MondwRmonPauseFrameCntEntry | not-accessible | current | Row definition for the pm253MondwRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.152.1.1 | Columnpm253MondwRmonPauseFrameCntIndex | read-only | current | Index definition for the pm253MondwRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.152.1.2 | Columnpm253MondwRmonPauseFrameCntValuePortn | read-only | current | Pause Counter On Client Output :This counter is increased each time a Pause frame is generated by the PM on the client port |
| 1.3.6.1.4.1.20044.13.11.2.4.152.1.3 | Columnpm253MondwRmonPauseFrameCntErrorPortn | read-only | current | Output Pause Counter Error :This OID when set indicates the output Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.152.1.4 | Columnpm253MondwRmonPauseFrameCntOverloadPortn | read-only | current | Output Pause Counter Overload :This OID when set indicates an output Pause counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.160 | Tablepm253MondwRmonTimerCntTable | not-accessible | current | List of pm253MondwRmonTimerCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.160.1 | Rowpm253MondwRmonTimerCntEntry | not-accessible | current | Row definition for the pm253MondwRmonTimerCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.160.1.1 | Columnpm253MondwRmonTimerCntIndex | read-only | current | Index definition for the pm253MondwRmonTimerCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.160.1.2 | Columnpm253MondwRmonTimerCntValuePortn | read-only | current | RMON Timer On Client Output :This is the timing counter dedicated to the downstream RMON counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.13.11.2.4.160.1.3 | Columnpm253MondwRmonTimerCntErrorPortn | read-only | current | Output RMON Timer Error :This OID when set indicates the output RMON timer is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.160.1.4 | Columnpm253MondwRmonTimerCntOverloadPortn | read-only | current | Output RMON Timer Overload :This OID when set indicates an output RMON timer overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.168 | Tablepm253MondwRmonBitsCntTable | not-accessible | current | List of pm253MondwRmonBitsCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.168.1 | Rowpm253MondwRmonBitsCntEntry | not-accessible | current | Row definition for the pm253MondwRmonBitsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.168.1.1 | Columnpm253MondwRmonBitsCntIndex | read-only | current | Index definition for the pm253MondwRmonBitsCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.168.1.2 | Columnpm253MondwRmonBitsCntValuePortn | read-only | current | Bits Counter On Client Output :This counter is increased each time a bit is received on the Output client port |
| 1.3.6.1.4.1.20044.13.11.2.4.168.1.3 | Columnpm253MondwRmonBitsCntErrorPortn | read-only | current | Output Bits Counter Error :This OID when set indicates the output Bits counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.168.1.4 | Columnpm253MondwRmonBitsCntOverloadPortn | read-only | current | Output Bits Counter Overload :This OID when set indicates an output Bits counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.176 | Tablepm253MondwRmonUnicastCntTable | not-accessible | current | List of pm253MondwRmonUnicastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.176.1 | Rowpm253MondwRmonUnicastCntEntry | not-accessible | current | Row definition for the pm253MondwRmonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.176.1.1 | Columnpm253MondwRmonUnicastCntIndex | read-only | current | Index definition for the pm253MondwRmonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.176.1.2 | Columnpm253MondwRmonUnicastCntValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.13.11.2.4.176.1.3 | Columnpm253MondwRmonUnicastCntErrorPortn | read-only | current | Output Unicast Counter Error :This OID when set indicates the output RMON timer is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.176.1.4 | Columnpm253MondwRmonUnicastCntOverloadPortn | read-only | current | Output Unicast Counter Overload :This OID when set indicates an output RMON timer overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.184 | Tablepm253MondwRmonNonUnicastCntTable | not-accessible | current | List of pm253MondwRmonNonUnicastCnt Article |
| 1.3.6.1.4.1.20044.13.11.2.4.184.1 | Rowpm253MondwRmonNonUnicastCntEntry | not-accessible | current | Row definition for the pm253MondwRmonNonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.184.1.1 | Columnpm253MondwRmonNonUnicastCntIndex | read-only | current | Index definition for the pm253MondwRmonNonUnicastCnt table |
| 1.3.6.1.4.1.20044.13.11.2.4.184.1.2 | Columnpm253MondwRmonNonUnicastCntValuePortn | read-only | current | Client Output Not Unicast Packets :This counter is increased each time a Non Unicast packet is transmitted on client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.13.11.2.4.184.1.3 | Columnpm253MondwRmonNonUnicastCntErrorPortn | read-only | current | Output Non Unicast Counter Error :This OID when set indicates the output Bits counter value is invalid on client port |
| 1.3.6.1.4.1.20044.13.11.2.4.184.1.4 | Columnpm253MondwRmonNonUnicastCntOverloadPortn | read-only | current | Output Non Unicast Counter Overload :This OID when set indicates an output Bits counter overload on client port |
| 1.3.6.1.4.1.20044.13.11.2.16 | Tablepm253PerfTelecomClientCurrent15StatTable | not-accessible | current | List of pm253PerfTelecomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.13.11.2.16.1 | Rowpm253PerfTelecomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm253PerfTelecomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.13.11.2.16.1.1 | Columnpm253PerfTelecomClientCurrent15StatIndex | read-only | current | Index definition for the pm253PerfTelecomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.13.11.2.16.1.2 | Columnpm253PerfTelecomClientCurrent15StatInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.16.1.3 | Columnpm253PerfTelecomClientCurrent15StatCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.16.1.4 | Columnpm253PerfTelecomClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.16.1.5 | Columnpm253PerfTelecomClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.16.1.6 | Columnpm253PerfTelecomClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.16.1.7 | Columnpm253PerfTelecomClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.16.1.8 | Columnpm253PerfTelecomClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.16.1.9 | Columnpm253PerfTelecomClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.16.1.10 | Columnpm253PerfTelecomClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.16.1.11 | Columnpm253PerfTelecomClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.24 | Tablepm253PerfTelecomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm253PerfTelecomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.24.1 | Rowpm253PerfTelecomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm253PerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.24.1.1 | Columnpm253PerfTelecomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm253PerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.24.1.2 | Columnpm253PerfTelecomClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.24.1.3 | Columnpm253PerfTelecomClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.24.1.4 | Columnpm253PerfTelecomClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.24.1.5 | Columnpm253PerfTelecomClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.24.1.6 | Columnpm253PerfTelecomClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.24.1.7 | Columnpm253PerfTelecomClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.24.1.8 | Columnpm253PerfTelecomClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.24.1.9 | Columnpm253PerfTelecomClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.24.1.10 | Columnpm253PerfTelecomClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.24.1.11 | Columnpm253PerfTelecomClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.25 | Tablepm253PerfTelecomClientPast15StatHistoryPort2Table | not-accessible | current | List of pm253PerfTelecomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.25.1 | Rowpm253PerfTelecomClientPast15StatHistoryPort2Entry | not-accessible | current | Row definition for the pm253PerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.25.1.1 | Columnpm253PerfTelecomClientPast15StatHistoryPort2Index | read-only | current | Index definition for the pm253PerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.25.1.2 | Columnpm253PerfTelecomClientPast15StatHistoryInvCvPort2 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.25.1.3 | Columnpm253PerfTelecomClientPast15StatHistoryCvValuePort2 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.25.1.4 | Columnpm253PerfTelecomClientPast15StatHistoryInvEsPort2 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.25.1.5 | Columnpm253PerfTelecomClientPast15StatHistoryEsValuePort2 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.25.1.6 | Columnpm253PerfTelecomClientPast15StatHistoryInvSesPort2 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.25.1.7 | Columnpm253PerfTelecomClientPast15StatHistorySesValuePort2 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.25.1.8 | Columnpm253PerfTelecomClientPast15StatHistoryInvSefsPort2 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.25.1.9 | Columnpm253PerfTelecomClientPast15StatHistorySefsValuePort2 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.25.1.10 | Columnpm253PerfTelecomClientPast15StatHistoryInvUasPort2 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.25.1.11 | Columnpm253PerfTelecomClientPast15StatHistoryUasValuePort2 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.26 | Tablepm253PerfTelecomClientPast15StatHistoryPort3Table | not-accessible | current | List of pm253PerfTelecomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.26.1 | Rowpm253PerfTelecomClientPast15StatHistoryPort3Entry | not-accessible | current | Row definition for the pm253PerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.26.1.1 | Columnpm253PerfTelecomClientPast15StatHistoryPort3Index | read-only | current | Index definition for the pm253PerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.26.1.2 | Columnpm253PerfTelecomClientPast15StatHistoryInvCvPort3 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.26.1.3 | Columnpm253PerfTelecomClientPast15StatHistoryCvValuePort3 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.26.1.4 | Columnpm253PerfTelecomClientPast15StatHistoryInvEsPort3 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.26.1.5 | Columnpm253PerfTelecomClientPast15StatHistoryEsValuePort3 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.26.1.6 | Columnpm253PerfTelecomClientPast15StatHistoryInvSesPort3 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.26.1.7 | Columnpm253PerfTelecomClientPast15StatHistorySesValuePort3 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.26.1.8 | Columnpm253PerfTelecomClientPast15StatHistoryInvSefsPort3 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.26.1.9 | Columnpm253PerfTelecomClientPast15StatHistorySefsValuePort3 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.26.1.10 | Columnpm253PerfTelecomClientPast15StatHistoryInvUasPort3 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.26.1.11 | Columnpm253PerfTelecomClientPast15StatHistoryUasValuePort3 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.32 | Tablepm253PerfTelecomClientCurrent24StatTable | not-accessible | current | List of pm253PerfTelecomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.13.11.2.32.1 | Rowpm253PerfTelecomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm253PerfTelecomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.13.11.2.32.1.1 | Columnpm253PerfTelecomClientCurrent24StatIndex | read-only | current | Index definition for the pm253PerfTelecomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.13.11.2.32.1.2 | Columnpm253PerfTelecomClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.32.1.3 | Columnpm253PerfTelecomClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.32.1.4 | Columnpm253PerfTelecomClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.32.1.5 | Columnpm253PerfTelecomClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.32.1.6 | Columnpm253PerfTelecomClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.32.1.7 | Columnpm253PerfTelecomClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.32.1.8 | Columnpm253PerfTelecomClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.32.1.9 | Columnpm253PerfTelecomClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.32.1.10 | Columnpm253PerfTelecomClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.32.1.11 | Columnpm253PerfTelecomClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.40 | Tablepm253PerfTelecomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm253PerfTelecomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.40.1 | Rowpm253PerfTelecomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm253PerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.40.1.1 | Columnpm253PerfTelecomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm253PerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.40.1.2 | Columnpm253PerfTelecomClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.40.1.3 | Columnpm253PerfTelecomClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.40.1.4 | Columnpm253PerfTelecomClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.40.1.5 | Columnpm253PerfTelecomClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.40.1.6 | Columnpm253PerfTelecomClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.40.1.7 | Columnpm253PerfTelecomClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.40.1.8 | Columnpm253PerfTelecomClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.40.1.9 | Columnpm253PerfTelecomClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.40.1.10 | Columnpm253PerfTelecomClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.40.1.11 | Columnpm253PerfTelecomClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.41 | Tablepm253PerfTelecomClientPast24StatHistoryPort2Table | not-accessible | current | List of pm253PerfTelecomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.41.1 | Rowpm253PerfTelecomClientPast24StatHistoryPort2Entry | not-accessible | current | Row definition for the pm253PerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.41.1.1 | Columnpm253PerfTelecomClientPast24StatHistoryPort2Index | read-only | current | Index definition for the pm253PerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.41.1.2 | Columnpm253PerfTelecomClientPast24StatHistoryInvCvPort2 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.41.1.3 | Columnpm253PerfTelecomClientPast24StatHistoryCvValuePort2 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.41.1.4 | Columnpm253PerfTelecomClientPast24StatHistoryInvEsPort2 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.41.1.5 | Columnpm253PerfTelecomClientPast24StatHistoryEsValuePort2 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.41.1.6 | Columnpm253PerfTelecomClientPast24StatHistoryInvSesPort2 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.41.1.7 | Columnpm253PerfTelecomClientPast24StatHistorySesValuePort2 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.41.1.8 | Columnpm253PerfTelecomClientPast24StatHistoryInvSefsPort2 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.41.1.9 | Columnpm253PerfTelecomClientPast24StatHistorySefsValuePort2 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.41.1.10 | Columnpm253PerfTelecomClientPast24StatHistoryInvUasPort2 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.41.1.11 | Columnpm253PerfTelecomClientPast24StatHistoryUasValuePort2 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.42 | Tablepm253PerfTelecomClientPast24StatHistoryPort3Table | not-accessible | current | List of pm253PerfTelecomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.42.1 | Rowpm253PerfTelecomClientPast24StatHistoryPort3Entry | not-accessible | current | Row definition for the pm253PerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.42.1.1 | Columnpm253PerfTelecomClientPast24StatHistoryPort3Index | read-only | current | Index definition for the pm253PerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.42.1.2 | Columnpm253PerfTelecomClientPast24StatHistoryInvCvPort3 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.42.1.3 | Columnpm253PerfTelecomClientPast24StatHistoryCvValuePort3 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.2.42.1.4 | Columnpm253PerfTelecomClientPast24StatHistoryInvEsPort3 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.42.1.5 | Columnpm253PerfTelecomClientPast24StatHistoryEsValuePort3 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.42.1.6 | Columnpm253PerfTelecomClientPast24StatHistoryInvSesPort3 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.42.1.7 | Columnpm253PerfTelecomClientPast24StatHistorySesValuePort3 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.42.1.8 | Columnpm253PerfTelecomClientPast24StatHistoryInvSefsPort3 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.42.1.9 | Columnpm253PerfTelecomClientPast24StatHistorySefsValuePort3 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.42.1.10 | Columnpm253PerfTelecomClientPast24StatHistoryInvUasPort3 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.42.1.11 | Columnpm253PerfTelecomClientPast24StatHistoryUasValuePort3 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.2.256 | Tablepm253PerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm253PerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.13.11.2.256.1 | Rowpm253PerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm253PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.13.11.2.256.1.1 | Columnpm253PerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm253PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.13.11.2.256.1.2 | Columnpm253perfdatacomclientCurrent15StatInBytesCountInvPortn | read-only | current | Client Current 15-min Input Bytes counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.3 | Columnpm253perfdatacomclientCurrent15StatInBytesCountPortn | read-only | current | Client Current 15-min Input Bytes counter :This OID gives the current 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.4 | Columnpm253perfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.5 | Columnpm253perfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.8 | Columnpm253perfdatacomclientCurrent15StatInBroadcastCountInvPortn | read-only | current | Client Current 15-min Input Broadcast counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.9 | Columnpm253perfdatacomclientCurrent15StatInBroadcastCountPortn | read-only | current | Client Current 15-min Input Broadcast counter :This OID gives the current 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.10 | Columnpm253perfdatacomclientCurrent15StatInMulticastCountInvPortn | read-only | current | Client Current 15-min Input Multicast counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.11 | Columnpm253perfdatacomclientCurrent15StatInMulticastCountPortn | read-only | current | Client Current 15-min Input Multicast counter :This OID gives the current 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.20 | Columnpm253perfdatacomclientCurrent15StatInUnicastCountInvPortn | read-only | current | Client Current 15-min Input Unicast counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.21 | Columnpm253perfdatacomclientCurrent15StatInUnicastCountPortn | read-only | current | Client Current 15-min Input Unicast counter :This OID gives the current 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.22 | Columnpm253perfdatacomclientCurrent15StatInNonunicastCountInvPortn | read-only | current | Client Current 15-min Input Non Unicast counter inv. :This OID indicates that the current 15-min Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.23 | Columnpm253perfdatacomclientCurrent15StatInNonunicastCountPortn | read-only | current | Client Current 15-min Input Non Unicast counter :This OID gives the current 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.26 | Columnpm253perfdatacomclientCurrent15StatOutBytesCountInvPortn | read-only | current | Client Current 15-min Output Bytes counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.27 | Columnpm253perfdatacomclientCurrent15StatOutBytesCountPortn | read-only | current | Client Current 15-min Output Bytes counter :This OID gives the current 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.32 | Columnpm253perfdatacomclientCurrent15StatOutBroadcastCountInvPortn | read-only | current | Client Current 15-min Output Broadcast counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.33 | Columnpm253perfdatacomclientCurrent15StatOutBroadcastCountPortn | read-only | current | Client Current 15-min Output Broadcast counter :This OID gives the current 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.34 | Columnpm253perfdatacomclientCurrent15StatOutMulticastCountInvPortn | read-only | current | Client Current 15-min Output Multicast counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.35 | Columnpm253perfdatacomclientCurrent15StatOutMulticastCountPortn | read-only | current | Client Current 15-min Output Multicast counter :This OID gives the current 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.42 | Columnpm253perfdatacomclientCurrent15StatOutUnicastCountInvPortn | read-only | current | Client Current 15-min Output Unicast counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.43 | Columnpm253perfdatacomclientCurrent15StatOutUnicastCountPortn | read-only | current | Client Current 15-min Output Unicast counter :This OID gives the current 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.256.1.44 | Columnpm253perfdatacomclientCurrent15StatOutNonunicastCountInvPortn | read-only | current | Client Current 15-min Output Non Unicast counter inv. :This OID indicates that the current 15-min Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.256.1.45 | Columnpm253perfdatacomclientCurrent15StatOutNonunicastCountPortn | read-only | current | Client Current 15-min Output Non Unicast counter :This OID gives the current 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264 | Tablepm253PerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm253PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.264.1 | Rowpm253PerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm253PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.264.1.1 | Columnpm253PerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm253PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.264.1.2 | Columnpm253perfdatacomclientPast15StatInBytesCountInvPort1 | read-only | current | Client Past 15-min Input Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.3 | Columnpm253perfdatacomclientPast15StatInBytesCountPort1 | read-only | current | Client Past 15-min Input Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.4 | Columnpm253perfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.5 | Columnpm253perfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.8 | Columnpm253perfdatacomclientPast15StatInBroadcastCountInvPort1 | read-only | current | Client Past 15-min Input Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.9 | Columnpm253perfdatacomclientPast15StatInBroadcastCountPort1 | read-only | current | Client Past 15-min Input Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.10 | Columnpm253perfdatacomclientPast15StatInMulticastCountInvPort1 | read-only | current | Client Past 15-min Input Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.11 | Columnpm253perfdatacomclientPast15StatInMulticastCountPort1 | read-only | current | Client Past 15-min Input Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.20 | Columnpm253perfdatacomclientPast15StatInUnicastCountInvPort1 | read-only | current | Client Past 15-min Input Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.21 | Columnpm253perfdatacomclientPast15StatInUnicastCountPort1 | read-only | current | Client Past 15-min Input Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.22 | Columnpm253perfdatacomclientPast15StatInNonunicastCountInvPort1 | read-only | current | Client Past 15-min Input Non Unicast counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.23 | Columnpm253perfdatacomclientPast15StatInNonunicastCountPort1 | read-only | current | Client Past 15-min Input Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.26 | Columnpm253perfdatacomclientPast15StatOutBytesCountInvPort1 | read-only | current | Client Past 15-min Output Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.27 | Columnpm253perfdatacomclientPast15StatOutBytesCountPort1 | read-only | current | Client Past 15-min Output Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.32 | Columnpm253perfdatacomclientPast15StatOutBroadcastCountInvPort1 | read-only | current | Client Past 15-min Output Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.33 | Columnpm253perfdatacomclientPast15StatOutBroadcastCountPort1 | read-only | current | Client Past 15-min Output Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.34 | Columnpm253perfdatacomclientPast15StatOutMulticastCountInvPort1 | read-only | current | Client Past 15-min Output Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.35 | Columnpm253perfdatacomclientPast15StatOutMulticastCountPort1 | read-only | current | Client Past 15-min Output Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.42 | Columnpm253perfdatacomclientPast15StatOutUnicastCountInvPort1 | read-only | current | Client Past 15-min Output Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.43 | Columnpm253perfdatacomclientPast15StatOutUnicastCountPort1 | read-only | current | Client Past 15-min Output Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.264.1.44 | Columnpm253perfdatacomclientPast15StatOutNonunicastCountInvPort1 | read-only | current | Client Past 15-min Output Non Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.264.1.45 | Columnpm253perfdatacomclientPast15StatOutNonunicastCountPort1 | read-only | current | Client Past 15-min Output Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265 | Tablepm253PerfDatacomClientPast15StatHistoryPort2Table | not-accessible | current | List of pm253PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.265.1 | Rowpm253PerfDatacomClientPast15StatHistoryPort2Entry | not-accessible | current | Row definition for the pm253PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.265.1.1 | Columnpm253PerfDatacomClientPast15StatHistoryPort2Index | read-only | current | Index definition for the pm253PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.265.1.2 | Columnpm253perfdatacomclientPast15StatInBytesCountInvPort2 | read-only | current | Client Past 15-min Input Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.3 | Columnpm253perfdatacomclientPast15StatInBytesCountPort2 | read-only | current | Client Past 15-min Input Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.4 | Columnpm253perfdatacomclientPast15StatInCrcCountInvPort2 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.5 | Columnpm253perfdatacomclientPast15StatInCrcCountPort2 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.8 | Columnpm253perfdatacomclientPast15StatInBroadcastCountInvPort2 | read-only | current | Client Past 15-min Input Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.9 | Columnpm253perfdatacomclientPast15StatInBroadcastCountPort2 | read-only | current | Client Past 15-min Input Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.10 | Columnpm253perfdatacomclientPast15StatInMulticastCountInvPort2 | read-only | current | Client Past 15-min Input Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.11 | Columnpm253perfdatacomclientPast15StatInMulticastCountPort2 | read-only | current | Client Past 15-min Input Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.20 | Columnpm253perfdatacomclientPast15StatInUnicastCountInvPort2 | read-only | current | Client Past 15-min Input Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.21 | Columnpm253perfdatacomclientPast15StatInUnicastCountPort2 | read-only | current | Client Past 15-min Input Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.22 | Columnpm253perfdatacomclientPast15StatInNonunicastCountInvPort2 | read-only | current | Client Past 15-min Input Non Unicast counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.23 | Columnpm253perfdatacomclientPast15StatInNonunicastCountPort2 | read-only | current | Client Past 15-min Input Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.26 | Columnpm253perfdatacomclientPast15StatOutBytesCountInvPort2 | read-only | current | Client Past 15-min Output Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.27 | Columnpm253perfdatacomclientPast15StatOutBytesCountPort2 | read-only | current | Client Past 15-min Output Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.32 | Columnpm253perfdatacomclientPast15StatOutBroadcastCountInvPort2 | read-only | current | Client Past 15-min Output Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.33 | Columnpm253perfdatacomclientPast15StatOutBroadcastCountPort2 | read-only | current | Client Past 15-min Output Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.34 | Columnpm253perfdatacomclientPast15StatOutMulticastCountInvPort2 | read-only | current | Client Past 15-min Output Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.35 | Columnpm253perfdatacomclientPast15StatOutMulticastCountPort2 | read-only | current | Client Past 15-min Output Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.42 | Columnpm253perfdatacomclientPast15StatOutUnicastCountInvPort2 | read-only | current | Client Past 15-min Output Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.43 | Columnpm253perfdatacomclientPast15StatOutUnicastCountPort2 | read-only | current | Client Past 15-min Output Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.265.1.44 | Columnpm253perfdatacomclientPast15StatOutNonunicastCountInvPort2 | read-only | current | Client Past 15-min Output Non Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.265.1.45 | Columnpm253perfdatacomclientPast15StatOutNonunicastCountPort2 | read-only | current | Client Past 15-min Output Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266 | Tablepm253PerfDatacomClientPast15StatHistoryPort3Table | not-accessible | current | List of pm253PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.266.1 | Rowpm253PerfDatacomClientPast15StatHistoryPort3Entry | not-accessible | current | Row definition for the pm253PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.266.1.1 | Columnpm253PerfDatacomClientPast15StatHistoryPort3Index | read-only | current | Index definition for the pm253PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.266.1.2 | Columnpm253perfdatacomclientPast15StatInBytesCountInvPort3 | read-only | current | Client Past 15-min Input Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.3 | Columnpm253perfdatacomclientPast15StatInBytesCountPort3 | read-only | current | Client Past 15-min Input Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.4 | Columnpm253perfdatacomclientPast15StatInCrcCountInvPort3 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.5 | Columnpm253perfdatacomclientPast15StatInCrcCountPort3 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.8 | Columnpm253perfdatacomclientPast15StatInBroadcastCountInvPort3 | read-only | current | Client Past 15-min Input Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.9 | Columnpm253perfdatacomclientPast15StatInBroadcastCountPort3 | read-only | current | Client Past 15-min Input Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.10 | Columnpm253perfdatacomclientPast15StatInMulticastCountInvPort3 | read-only | current | Client Past 15-min Input Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.11 | Columnpm253perfdatacomclientPast15StatInMulticastCountPort3 | read-only | current | Client Past 15-min Input Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.20 | Columnpm253perfdatacomclientPast15StatInUnicastCountInvPort3 | read-only | current | Client Past 15-min Input Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.21 | Columnpm253perfdatacomclientPast15StatInUnicastCountPort3 | read-only | current | Client Past 15-min Input Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.22 | Columnpm253perfdatacomclientPast15StatInNonunicastCountInvPort3 | read-only | current | Client Past 15-min Input Non Unicast counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.23 | Columnpm253perfdatacomclientPast15StatInNonunicastCountPort3 | read-only | current | Client Past 15-min Input Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.26 | Columnpm253perfdatacomclientPast15StatOutBytesCountInvPort3 | read-only | current | Client Past 15-min Output Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.27 | Columnpm253perfdatacomclientPast15StatOutBytesCountPort3 | read-only | current | Client Past 15-min Output Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.32 | Columnpm253perfdatacomclientPast15StatOutBroadcastCountInvPort3 | read-only | current | Client Past 15-min Output Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.33 | Columnpm253perfdatacomclientPast15StatOutBroadcastCountPort3 | read-only | current | Client Past 15-min Output Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.34 | Columnpm253perfdatacomclientPast15StatOutMulticastCountInvPort3 | read-only | current | Client Past 15-min Output Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.35 | Columnpm253perfdatacomclientPast15StatOutMulticastCountPort3 | read-only | current | Client Past 15-min Output Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.42 | Columnpm253perfdatacomclientPast15StatOutUnicastCountInvPort3 | read-only | current | Client Past 15-min Output Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.43 | Columnpm253perfdatacomclientPast15StatOutUnicastCountPort3 | read-only | current | Client Past 15-min Output Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.266.1.44 | Columnpm253perfdatacomclientPast15StatOutNonunicastCountInvPort3 | read-only | current | Client Past 15-min Output Non Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.266.1.45 | Columnpm253perfdatacomclientPast15StatOutNonunicastCountPort3 | read-only | current | Client Past 15-min Output Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272 | Tablepm253PerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm253PerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.13.11.2.272.1 | Rowpm253PerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm253PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.13.11.2.272.1.1 | Columnpm253PerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm253PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.13.11.2.272.1.2 | Columnpm253perfdatacomclientCurrent24StatInBytesCountInvPortn | read-only | current | Client Current 24-hours Input Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.3 | Columnpm253perfdatacomclientCurrent24StatInBytesCountPortn | read-only | current | Client Current 24-hours Input Bytes counter :This OID gives the current 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.4 | Columnpm253perfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.5 | Columnpm253perfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.8 | Columnpm253perfdatacomclientCurrent24StatInBroadcastCountInvPortn | read-only | current | Client Current 24-hours Input Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.9 | Columnpm253perfdatacomclientCurrent24StatInBroadcastCountPortn | read-only | current | Client Current 24-hours Input Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.10 | Columnpm253perfdatacomclientCurrent24StatInMulticastCountInvPortn | read-only | current | Client Current 24-hours Input Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.11 | Columnpm253perfdatacomclientCurrent24StatInMulticastCountPortn | read-only | current | Client Current 24-hours Input Multicast counter :This OID gives the current 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.20 | Columnpm253perfdatacomclientCurrent24StatInUnicastCountInvPortn | read-only | current | Client Current 24-hours Input Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.21 | Columnpm253perfdatacomclientCurrent24StatInUnicastCountPortn | read-only | current | Client Current 24-hours Input Unicast counter :This OID gives the current 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.22 | Columnpm253perfdatacomclientCurrent24StatInNonunicastCountInvPortn | read-only | current | Client Current 24-hours Input Non Unicast counter inv. :This OID indicates that the current 24-hours Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.23 | Columnpm253perfdatacomclientCurrent24StatInNonunicastCountPortn | read-only | current | Client Current 24-hours Input Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.26 | Columnpm253perfdatacomclientCurrent24StatOutBytesCountInvPortn | read-only | current | Client Current 24-hours Output Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.27 | Columnpm253perfdatacomclientCurrent24StatOutBytesCountPortn | read-only | current | Client Current 24-hours Output Bytes counter :This OID gives the current 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.32 | Columnpm253perfdatacomclientCurrent24StatOutBroadcastCountInvPortn | read-only | current | Client Current 24-hours Output Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.33 | Columnpm253perfdatacomclientCurrent24StatOutBroadcastCountPortn | read-only | current | Client Current 24-hours Output Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.34 | Columnpm253perfdatacomclientCurrent24StatOutMulticastCountInvPortn | read-only | current | Client Current 24-hours Output Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.35 | Columnpm253perfdatacomclientCurrent24StatOutMulticastCountPortn | read-only | current | Client Current 24-hours Output Multicast counter :This OID gives the current 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.42 | Columnpm253perfdatacomclientCurrent24StatOutUnicastCountInvPortn | read-only | current | Client Current 24-hours Output Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.43 | Columnpm253perfdatacomclientCurrent24StatOutUnicastCountPortn | read-only | current | Client Current 24-hours Output Unicast counter :This OID gives the current 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.272.1.44 | Columnpm253perfdatacomclientCurrent24StatOutNonunicastCountInvPortn | read-only | current | Client Current 24-hours Output Non Unicast counter inv. :This OID indicates that the current 24-hours Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.272.1.45 | Columnpm253perfdatacomclientCurrent24StatOutNonunicastCountPortn | read-only | current | Client Current 24-hours Output Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280 | Tablepm253PerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm253PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.280.1 | Rowpm253PerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm253PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.280.1.1 | Columnpm253PerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm253PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.280.1.2 | Columnpm253perfdatacomclientPast24StatInBytesCountInvPort1 | read-only | current | Client Past 24-hours Input Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.3 | Columnpm253perfdatacomclientPast24StatInBytesCountPort1 | read-only | current | Client Past 24-hours Input Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.4 | Columnpm253perfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.5 | Columnpm253perfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.8 | Columnpm253perfdatacomclientPast24StatInBroadcastCountInvPort1 | read-only | current | Client Past 24-hours Input Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.9 | Columnpm253perfdatacomclientPast24StatInBroadcastCountPort1 | read-only | current | Client Past 24-hours Input Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.10 | Columnpm253perfdatacomclientPast24StatInMulticastCountInvPort1 | read-only | current | Client Past 24-hours Input Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.11 | Columnpm253perfdatacomclientPast24StatInMulticastCountPort1 | read-only | current | Client Past 24-hours Input Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.20 | Columnpm253perfdatacomclientPast24StatInUnicastCountInvPort1 | read-only | current | Client Past 24-hours Input Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.21 | Columnpm253perfdatacomclientPast24StatInUnicastCountPort1 | read-only | current | Client Past 24-hours Input Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.22 | Columnpm253perfdatacomclientPast24StatInNonunicastCountInvPort1 | read-only | current | Client Past 24-hours Input Non Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.23 | Columnpm253perfdatacomclientPast24StatInNonunicastCountPort1 | read-only | current | Client Past 24-hours Input Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.26 | Columnpm253perfdatacomclientPast24StatOutBytesCountInvPort1 | read-only | current | Client Past 24-hours Output Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.27 | Columnpm253perfdatacomclientPast24StatOutBytesCountPort1 | read-only | current | Client Past 24-hours Output Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.32 | Columnpm253perfdatacomclientPast24StatOutBroadcastCountInvPort1 | read-only | current | Client Past 24-hours Output Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.33 | Columnpm253perfdatacomclientPast24StatOutBroadcastCountPort1 | read-only | current | Client Past 24-hours Output Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.34 | Columnpm253perfdatacomclientPast24StatOutMulticastCountInvPort1 | read-only | current | Client Past 24-hours Output Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.35 | Columnpm253perfdatacomclientPast24StatOutMulticastCountPort1 | read-only | current | Client Past 24-hours Output Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.42 | Columnpm253perfdatacomclientPast24StatOutUnicastCountInvPort1 | read-only | current | Client Past 24-hours Output Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.43 | Columnpm253perfdatacomclientPast24StatOutUnicastCountPort1 | read-only | current | Client Past 24-hours Output Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.280.1.44 | Columnpm253perfdatacomclientPast24StatOutNonunicastCountInvPort1 | read-only | current | Client Past 24-hours Output Non Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.280.1.45 | Columnpm253perfdatacomclientPast24StatOutNonunicastCountPort1 | read-only | current | Client Past 24-hours Output Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281 | Tablepm253PerfDatacomClientPast24StatHistoryPort2Table | not-accessible | current | List of pm253PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.281.1 | Rowpm253PerfDatacomClientPast24StatHistoryPort2Entry | not-accessible | current | Row definition for the pm253PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.281.1.1 | Columnpm253PerfDatacomClientPast24StatHistoryPort2Index | read-only | current | Index definition for the pm253PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.281.1.2 | Columnpm253perfdatacomclientPast24StatInBytesCountInvPort2 | read-only | current | Client Past 24-hours Input Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.3 | Columnpm253perfdatacomclientPast24StatInBytesCountPort2 | read-only | current | Client Past 24-hours Input Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.4 | Columnpm253perfdatacomclientPast24StatInCrcCountInvPort2 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.5 | Columnpm253perfdatacomclientPast24StatInCrcCountPort2 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.8 | Columnpm253perfdatacomclientPast24StatInBroadcastCountInvPort2 | read-only | current | Client Past 24-hours Input Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.9 | Columnpm253perfdatacomclientPast24StatInBroadcastCountPort2 | read-only | current | Client Past 24-hours Input Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.10 | Columnpm253perfdatacomclientPast24StatInMulticastCountInvPort2 | read-only | current | Client Past 24-hours Input Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.11 | Columnpm253perfdatacomclientPast24StatInMulticastCountPort2 | read-only | current | Client Past 24-hours Input Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.20 | Columnpm253perfdatacomclientPast24StatInUnicastCountInvPort2 | read-only | current | Client Past 24-hours Input Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.21 | Columnpm253perfdatacomclientPast24StatInUnicastCountPort2 | read-only | current | Client Past 24-hours Input Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.22 | Columnpm253perfdatacomclientPast24StatInNonunicastCountInvPort2 | read-only | current | Client Past 24-hours Input Non Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.23 | Columnpm253perfdatacomclientPast24StatInNonunicastCountPort2 | read-only | current | Client Past 24-hours Input Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.26 | Columnpm253perfdatacomclientPast24StatOutBytesCountInvPort2 | read-only | current | Client Past 24-hours Output Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.27 | Columnpm253perfdatacomclientPast24StatOutBytesCountPort2 | read-only | current | Client Past 24-hours Output Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.32 | Columnpm253perfdatacomclientPast24StatOutBroadcastCountInvPort2 | read-only | current | Client Past 24-hours Output Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.33 | Columnpm253perfdatacomclientPast24StatOutBroadcastCountPort2 | read-only | current | Client Past 24-hours Output Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.34 | Columnpm253perfdatacomclientPast24StatOutMulticastCountInvPort2 | read-only | current | Client Past 24-hours Output Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.35 | Columnpm253perfdatacomclientPast24StatOutMulticastCountPort2 | read-only | current | Client Past 24-hours Output Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.42 | Columnpm253perfdatacomclientPast24StatOutUnicastCountInvPort2 | read-only | current | Client Past 24-hours Output Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.43 | Columnpm253perfdatacomclientPast24StatOutUnicastCountPort2 | read-only | current | Client Past 24-hours Output Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.281.1.44 | Columnpm253perfdatacomclientPast24StatOutNonunicastCountInvPort2 | read-only | current | Client Past 24-hours Output Non Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.281.1.45 | Columnpm253perfdatacomclientPast24StatOutNonunicastCountPort2 | read-only | current | Client Past 24-hours Output Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282 | Tablepm253PerfDatacomClientPast24StatHistoryPort3Table | not-accessible | current | List of pm253PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.2.282.1 | Rowpm253PerfDatacomClientPast24StatHistoryPort3Entry | not-accessible | current | Row definition for the pm253PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.282.1.1 | Columnpm253PerfDatacomClientPast24StatHistoryPort3Index | read-only | current | Index definition for the pm253PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.2.282.1.2 | Columnpm253perfdatacomclientPast24StatInBytesCountInvPort3 | read-only | current | Client Past 24-hours Input Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.3 | Columnpm253perfdatacomclientPast24StatInBytesCountPort3 | read-only | current | Client Past 24-hours Input Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.4 | Columnpm253perfdatacomclientPast24StatInCrcCountInvPort3 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.5 | Columnpm253perfdatacomclientPast24StatInCrcCountPort3 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours CRC counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.8 | Columnpm253perfdatacomclientPast24StatInBroadcastCountInvPort3 | read-only | current | Client Past 24-hours Input Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.9 | Columnpm253perfdatacomclientPast24StatInBroadcastCountPort3 | read-only | current | Client Past 24-hours Input Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.10 | Columnpm253perfdatacomclientPast24StatInMulticastCountInvPort3 | read-only | current | Client Past 24-hours Input Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.11 | Columnpm253perfdatacomclientPast24StatInMulticastCountPort3 | read-only | current | Client Past 24-hours Input Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.20 | Columnpm253perfdatacomclientPast24StatInUnicastCountInvPort3 | read-only | current | Client Past 24-hours Input Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.21 | Columnpm253perfdatacomclientPast24StatInUnicastCountPort3 | read-only | current | Client Past 24-hours Input Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.22 | Columnpm253perfdatacomclientPast24StatInNonunicastCountInvPort3 | read-only | current | Client Past 24-hours Input Non Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.23 | Columnpm253perfdatacomclientPast24StatInNonunicastCountPort3 | read-only | current | Client Past 24-hours Input Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.26 | Columnpm253perfdatacomclientPast24StatOutBytesCountInvPort3 | read-only | current | Client Past 24-hours Output Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.27 | Columnpm253perfdatacomclientPast24StatOutBytesCountPort3 | read-only | current | Client Past 24-hours Output Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.32 | Columnpm253perfdatacomclientPast24StatOutBroadcastCountInvPort3 | read-only | current | Client Past 24-hours Output Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.33 | Columnpm253perfdatacomclientPast24StatOutBroadcastCountPort3 | read-only | current | Client Past 24-hours Output Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.34 | Columnpm253perfdatacomclientPast24StatOutMulticastCountInvPort3 | read-only | current | Client Past 24-hours Output Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.35 | Columnpm253perfdatacomclientPast24StatOutMulticastCountPort3 | read-only | current | Client Past 24-hours Output Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.42 | Columnpm253perfdatacomclientPast24StatOutUnicastCountInvPort3 | read-only | current | Client Past 24-hours Output Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.43 | Columnpm253perfdatacomclientPast24StatOutUnicastCountPort3 | read-only | current | Client Past 24-hours Output Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.2.282.1.44 | Columnpm253perfdatacomclientPast24StatOutNonunicastCountInvPort3 | read-only | current | Client Past 24-hours Output Non Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.13.11.2.282.1.45 | Columnpm253perfdatacomclientPast24StatOutNonunicastCountPort3 | read-only | current | Client Past 24-hours Output Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.13.11.3 | Nodepm253MonLine | |||
| 1.3.6.1.4.1.20044.13.11.3.128 | Tablepm253PerfTelecomLineCurrent15StatTable | not-accessible | current | List of pm253PerfTelecomLineCurrent15Stat Article |
| 1.3.6.1.4.1.20044.13.11.3.128.1 | Rowpm253PerfTelecomLineCurrent15StatEntry | not-accessible | current | Row definition for the pm253PerfTelecomLineCurrent15Stat table |
| 1.3.6.1.4.1.20044.13.11.3.128.1.1 | Columnpm253PerfTelecomLineCurrent15StatIndex | read-only | current | Index definition for the pm253PerfTelecomLineCurrent15Stat table |
| 1.3.6.1.4.1.20044.13.11.3.128.1.2 | Columnpm253PerfTelecomLineCurrent15StatInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.128.1.3 | Columnpm253PerfTelecomLineCurrent15StatCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.3.128.1.4 | Columnpm253PerfTelecomLineCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.128.1.5 | Columnpm253PerfTelecomLineCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.128.1.6 | Columnpm253PerfTelecomLineCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.128.1.7 | Columnpm253PerfTelecomLineCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.128.1.8 | Columnpm253PerfTelecomLineCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.128.1.9 | Columnpm253PerfTelecomLineCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.128.1.10 | Columnpm253PerfTelecomLineCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.128.1.11 | Columnpm253PerfTelecomLineCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.129 | Tablepm253PerfTelecomLinePast15StatHistoryPort1Table | not-accessible | current | List of pm253PerfTelecomLinePast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.3.129.1 | Rowpm253PerfTelecomLinePast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm253PerfTelecomLinePast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.129.1.1 | Columnpm253PerfTelecomLinePast15StatHistoryPort1Index | read-only | current | Index definition for the pm253PerfTelecomLinePast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.129.1.2 | Columnpm253PerfTelecomLinePast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.129.1.3 | Columnpm253PerfTelecomLinePast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.3.129.1.4 | Columnpm253PerfTelecomLinePast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.129.1.5 | Columnpm253PerfTelecomLinePast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.129.1.6 | Columnpm253PerfTelecomLinePast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.129.1.7 | Columnpm253PerfTelecomLinePast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.129.1.8 | Columnpm253PerfTelecomLinePast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.129.1.9 | Columnpm253PerfTelecomLinePast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.129.1.10 | Columnpm253PerfTelecomLinePast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.129.1.11 | Columnpm253PerfTelecomLinePast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.130 | Tablepm253PerfTelecomLineCurrent24StatTable | not-accessible | current | List of pm253PerfTelecomLineCurrent24Stat Article |
| 1.3.6.1.4.1.20044.13.11.3.130.1 | Rowpm253PerfTelecomLineCurrent24StatEntry | not-accessible | current | Row definition for the pm253PerfTelecomLineCurrent24Stat table |
| 1.3.6.1.4.1.20044.13.11.3.130.1.1 | Columnpm253PerfTelecomLineCurrent24StatIndex | read-only | current | Index definition for the pm253PerfTelecomLineCurrent24Stat table |
| 1.3.6.1.4.1.20044.13.11.3.130.1.2 | Columnpm253PerfTelecomLineCurrent24StatInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.130.1.3 | Columnpm253PerfTelecomLineCurrent24StatCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.3.130.1.4 | Columnpm253PerfTelecomLineCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.130.1.5 | Columnpm253PerfTelecomLineCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.130.1.6 | Columnpm253PerfTelecomLineCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.130.1.7 | Columnpm253PerfTelecomLineCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.130.1.8 | Columnpm253PerfTelecomLineCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.130.1.9 | Columnpm253PerfTelecomLineCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.130.1.10 | Columnpm253PerfTelecomLineCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.130.1.11 | Columnpm253PerfTelecomLineCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.131 | Tablepm253PerfTelecomLinePast24StatHistoryPort1Table | not-accessible | current | List of pm253PerfTelecomLinePast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.3.131.1 | Rowpm253PerfTelecomLinePast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm253PerfTelecomLinePast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.131.1.1 | Columnpm253PerfTelecomLinePast24StatHistoryPort1Index | read-only | current | Index definition for the pm253PerfTelecomLinePast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.131.1.2 | Columnpm253PerfTelecomLinePast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.131.1.3 | Columnpm253PerfTelecomLinePast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.3.131.1.4 | Columnpm253PerfTelecomLinePast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.131.1.5 | Columnpm253PerfTelecomLinePast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.131.1.6 | Columnpm253PerfTelecomLinePast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.131.1.7 | Columnpm253PerfTelecomLinePast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.131.1.8 | Columnpm253PerfTelecomLinePast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.131.1.9 | Columnpm253PerfTelecomLinePast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.131.1.10 | Columnpm253PerfTelecomLinePast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.131.1.11 | Columnpm253PerfTelecomLinePast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.145 | Tablepm253PerfTelecomLinePast15StatHistoryPort2Table | not-accessible | current | List of pm253PerfTelecomLinePast15StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.3.145.1 | Rowpm253PerfTelecomLinePast15StatHistoryPort2Entry | not-accessible | current | Row definition for the pm253PerfTelecomLinePast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.145.1.1 | Columnpm253PerfTelecomLinePast15StatHistoryPort2Index | read-only | current | Index definition for the pm253PerfTelecomLinePast15StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.145.1.2 | Columnpm253PerfTelecomLinePast15StatHistoryInvCvPort2 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.145.1.3 | Columnpm253PerfTelecomLinePast15StatHistoryCvValuePort2 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.3.145.1.4 | Columnpm253PerfTelecomLinePast15StatHistoryInvEsPort2 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.145.1.5 | Columnpm253PerfTelecomLinePast15StatHistoryEsValuePort2 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.145.1.6 | Columnpm253PerfTelecomLinePast15StatHistoryInvSesPort2 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.145.1.7 | Columnpm253PerfTelecomLinePast15StatHistorySesValuePort2 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.145.1.8 | Columnpm253PerfTelecomLinePast15StatHistoryInvSefsPort2 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.145.1.9 | Columnpm253PerfTelecomLinePast15StatHistorySefsValuePort2 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.145.1.10 | Columnpm253PerfTelecomLinePast15StatHistoryInvUasPort2 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.145.1.11 | Columnpm253PerfTelecomLinePast15StatHistoryUasValuePort2 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.147 | Tablepm253PerfTelecomLinePast24StatHistoryPort2Table | not-accessible | current | List of pm253PerfTelecomLinePast24StatHistory Article |
| 1.3.6.1.4.1.20044.13.11.3.147.1 | Rowpm253PerfTelecomLinePast24StatHistoryPort2Entry | not-accessible | current | Row definition for the pm253PerfTelecomLinePast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.147.1.1 | Columnpm253PerfTelecomLinePast24StatHistoryPort2Index | read-only | current | Index definition for the pm253PerfTelecomLinePast24StatHistory table |
| 1.3.6.1.4.1.20044.13.11.3.147.1.2 | Columnpm253PerfTelecomLinePast24StatHistoryInvCvPort2 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.147.1.3 | Columnpm253PerfTelecomLinePast24StatHistoryCvValuePort2 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.13.11.3.147.1.4 | Columnpm253PerfTelecomLinePast24StatHistoryInvEsPort2 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.147.1.5 | Columnpm253PerfTelecomLinePast24StatHistoryEsValuePort2 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.147.1.6 | Columnpm253PerfTelecomLinePast24StatHistoryInvSesPort2 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.147.1.7 | Columnpm253PerfTelecomLinePast24StatHistorySesValuePort2 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.147.1.8 | Columnpm253PerfTelecomLinePast24StatHistoryInvSefsPort2 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.147.1.9 | Columnpm253PerfTelecomLinePast24StatHistorySefsValuePort2 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.13.11.3.147.1.10 | Columnpm253PerfTelecomLinePast24StatHistoryInvUasPort2 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.13.11.3.147.1.11 | Columnpm253PerfTelecomLinePast24StatHistoryUasValuePort2 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |