MIB Viewer

EKINOPS-Pm400frs04-MIB

927 objects
Creation.
Imported Objects
EKINOPS-MIBEkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.20044.100IdentitymodulePm400frs04Creation.
1.3.6.1.4.1.20044.100.2Nodepm400frs04alarms
1.3.6.1.4.1.20044.100.2.1Nodepm400frs04AlmOther
1.3.6.1.4.1.20044.100.2.1.1Nodepm400frs04AlmOtherNurg
1.3.6.1.4.1.20044.100.2.1.1.2Nodepm400frs04AlmsynthAlm2
1.3.6.1.4.1.20044.100.2.1.1.2.1Scalarpm400frs04AlmConfTableSaveread-onlycurrentPM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor…
1.3.6.1.4.1.20044.100.2.1.1.2.2Scalarpm400frs04AlmInvUploadread-onlycurrentInventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot…
1.3.6.1.4.1.20044.100.2.1.1.2.3Scalarpm400frs04AlmConfTableLoadread-onlycurrentPM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat…
1.3.6.1.4.1.20044.100.2.1.1.2.4Scalarpm400frs04AlmCorrelatOffread-onlycurrentNot Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype…
1.3.6.1.4.1.20044.100.2.1.1.2.5Scalarpm400frs04AlmMaintenanceOnread-onlycurrentMaintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> …
1.3.6.1.4.1.20044.100.2.1.2Nodepm400frs04AlmOtherUrg
1.3.6.1.4.1.20044.100.2.1.2.336Nodepm400frs04AlmmodFanFail
1.3.6.1.4.1.20044.100.2.1.2.336.1Scalarpm400frs04AlmFanFailread-onlycurrentFan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition…
1.3.6.1.4.1.20044.100.2.1.2.336.2Scalarpm400frs04AlmFanHighSpeedread-onlycurrentFan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro…
1.3.6.1.4.1.20044.100.2.1.3Nodepm400frs04AlmOtherCrit
1.3.6.1.4.1.20044.100.2.1.3.0Nodepm400frs04AlmsynthAlm0
1.3.6.1.4.1.20044.100.2.1.3.0.2Scalarpm400frs04AlmFailFanread-onlycurrentFan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_…
1.3.6.1.4.1.20044.100.2.1.3.0.9Scalarpm400frs04AlmModGlobFailread-onlycurrentModule Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip…
1.3.6.1.4.1.20044.100.2.1.3.0.15Scalarpm400frs04AlmDefFuseAread-onlycurrentFuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb…
1.3.6.1.4.1.20044.100.2.1.3.0.16Scalarpm400frs04AlmDefFuseBread-onlycurrentFuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb…
1.3.6.1.4.1.20044.100.2.1.3.78Nodepm400frs04AlmmsaModuleState
1.3.6.1.4.1.20044.100.2.1.3.78.1Scalarpm400frs04AlmMsaInitializeread-onlycurrentLine Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C…
1.3.6.1.4.1.20044.100.2.1.3.78.2Scalarpm400frs04AlmMsaLowPowerread-onlycurrentLine Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_…
1.3.6.1.4.1.20044.100.2.1.3.78.3Scalarpm400frs04AlmMsaHighPowerUpread-onlycurrentLine Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond…
1.3.6.1.4.1.20044.100.2.1.3.78.4Scalarpm400frs04AlmMsaTxOffread-onlycurrentLine Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause…
1.3.6.1.4.1.20044.100.2.1.3.78.5Scalarpm400frs04AlmMsaTxTurnOnread-onlycurrentLine Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> …
1.3.6.1.4.1.20044.100.2.1.3.78.6Scalarpm400frs04AlmMsaReadyread-onlycurrentLine Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc…
1.3.6.1.4.1.20044.100.2.1.3.78.7Scalarpm400frs04AlmMsaFaultread-onlycurrentLine Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause…
1.3.6.1.4.1.20044.100.2.1.3.78.8Scalarpm400frs04AlmMsaTxTurnOffread-onlycurrentLine Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp…
1.3.6.1.4.1.20044.100.2.1.3.78.9Scalarpm400frs04AlmMsaHighPowerDownread-onlycurrentLine Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <…
1.3.6.1.4.1.20044.100.2.1.3.78.12Scalarpm400frs04AlmModesNotSupportedread-onlycurrentModule Mode Not Supported :This OID indicates the configured Module Mode is not supported on the module<Help> This alarm indicates the configured Module Mode i…
1.3.6.1.4.1.20044.100.2.1.3.78.13Scalarpm400frs04AlmMsaTempShutdownread-onlycurrentLine Trscv Temperature Shutdown :This OID indicates a Trscv shutdown caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature shutdow…
1.3.6.1.4.1.20044.100.2.1.3.78.14Scalarpm400frs04AlmMsaTempWarningread-onlycurrentLine Trscv Temperature Warning :This OID indicates a Trscv warning caused by a temperature is out of range<Help> Warning indicating a Trscv temperature out of …
1.3.6.1.4.1.20044.100.2.1.3.78.15Scalarpm400frs04AlmMsaTempAlarmread-onlycurrentLine Trscv Temperature Alarm :This OID indicates a Trscv alarm caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature out of range …
1.3.6.1.4.1.20044.100.2.1.3.78.16Scalarpm400frs04AlmCoolingSystemAbsentread-onlycurrentAir Flow Module Absent :This OID indicates a cooling system not present as recommended by the rules<Help> Alarm indicating a cooling system not present as reco…
1.3.6.1.4.1.20044.100.2.2Nodepm400frs04AlmClient
1.3.6.1.4.1.20044.100.2.2.1Nodepm400frs04AlmClientNurg
1.3.6.1.4.1.20044.100.2.2.1.272Tablepm400frs04AlmclientSfpWarnDdmTablenot-accessiblecurrentList of pm400frs04AlmclientSfpWarnDdm Article
1.3.6.1.4.1.20044.100.2.2.1.272.1Rowpm400frs04AlmclientSfpWarnDdmEntrynot-accessiblecurrentRow definition for the pm400frs04AlmclientSfpWarnDdm table
1.3.6.1.4.1.20044.100.2.2.1.272.1.1Columnpm400frs04AlmclientSfpWarnDdmIndexread-onlycurrentIndex definition for the pm400frs04AlmclientSfpWarnDdm table
1.3.6.1.4.1.20044.100.2.2.1.272.1.2Columnpm400frs04AlmTxPwLowWngPortnread-onlycurrentClient Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning …
1.3.6.1.4.1.20044.100.2.2.1.272.1.3Columnpm400frs04AlmTxPwrHighWngPortnread-onlycurrentClient Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin…
1.3.6.1.4.1.20044.100.2.2.1.272.1.4Columnpm400frs04AlmTxBiasLowWngPortnread-onlycurrentClient Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin…
1.3.6.1.4.1.20044.100.2.2.1.272.1.5Columnpm400frs04AlmTxBiasHighWngPortnread-onlycurrentClient Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn…
1.3.6.1.4.1.20044.100.2.2.1.272.1.6Columnpm400frs04AlmVccLowWngPortnread-onlycurrentClient Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn…
1.3.6.1.4.1.20044.100.2.2.1.272.1.7Columnpm400frs04AlmVccHighWngPortnread-onlycurrentClient Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa…
1.3.6.1.4.1.20044.100.2.2.1.272.1.8Columnpm400frs04AlmTempLowWngPortnread-onlycurrentClient Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic…
1.3.6.1.4.1.20044.100.2.2.1.272.1.9Columnpm400frs04AlmTempHighWngPortnread-onlycurrentClient Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind…
1.3.6.1.4.1.20044.100.2.2.1.272.1.16Columnpm400frs04AlmRxPwrLowWngPortnread-onlycurrentClient Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i…
1.3.6.1.4.1.20044.100.2.2.1.272.1.17Columnpm400frs04AlmRxPwrHighWngPortnread-onlycurrentClient Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning…
1.3.6.1.4.1.20044.100.2.2.2Nodepm400frs04AlmClientUrg
1.3.6.1.4.1.20044.100.2.2.2.152Tablepm400frs04AlmclientHostLaneFaultTablenot-accessiblecurrentList of pm400frs04AlmclientHostLaneFault Article
1.3.6.1.4.1.20044.100.2.2.2.152.1Rowpm400frs04AlmclientHostLaneFaultEntrynot-accessiblecurrentRow definition for the pm400frs04AlmclientHostLaneFault table
1.3.6.1.4.1.20044.100.2.2.2.152.1.1Columnpm400frs04AlmclientHostLaneFaultIndexread-onlycurrentIndex definition for the pm400frs04AlmclientHostLaneFault table
1.3.6.1.4.1.20044.100.2.2.2.152.1.2Columnpm400frs04AlmClientLossOfSyncPortnread-onlycurrentClient Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit…
1.3.6.1.4.1.20044.100.2.2.2.152.1.3Columnpm400frs04AlmClientInputLossOfSigPortnread-onlycurrentClient Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl…
1.3.6.1.4.1.20044.100.2.2.2.152.1.4Columnpm400frs04AlmClientLanesMarkerUnlockPortnread-onlycurrentClient Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l…
1.3.6.1.4.1.20044.100.2.2.2.152.1.5Columnpm400frs04AlmClientLanes6466UnlockPortnread-onlycurrentClient Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C…
1.3.6.1.4.1.20044.100.2.2.2.152.1.6Columnpm400frs04AlmClientLanesNotAlignedPortnread-onlycurrentClient Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_…
1.3.6.1.4.1.20044.100.2.2.2.152.1.7Columnpm400frs04AlmClientCsfDetectedPortnread-onlycurrentClient Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client…
1.3.6.1.4.1.20044.100.2.2.2.152.1.10Columnpm400frs04AlmClientTxHostLolPortnread-onlycurrentClient Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr…
1.3.6.1.4.1.20044.100.2.2.2.152.1.11Columnpm400frs04AlmClientLaneTxFifoErrorPortnread-onlycurrentClient Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho…
1.3.6.1.4.1.20044.100.2.2.2.152.1.15Columnpm400frs04AlmClientBistErrorResultsPortnread-onlycurrentBIST Error Results :This OID indicates the Built In Self Test result <Help> This alarm indicates the Built In Self Test result <Condtype> CLIENT_BIST_ERROR_RES…
1.3.6.1.4.1.20044.100.2.2.2.152.1.16Columnpm400frs04AlmClientBistAlarmResultsPortnread-onlycurrentBIST Alarm Results :This OID indicates the Built In Self Test result <Help> This alarm indicates the Built In Self Test result <Condtype> CLIENT_BIST_ALARM_RES…
1.3.6.1.4.1.20044.100.2.2.2.152.1.17Columnpm400frs04AlmClientBistModePortnread-onlycurrentBIST Mode :This OID indicates the Built In Self Test mode is enabled <Help> This alarm indicates the Built In Self Test mode is enabled <Condtype> CLIENT_BIST_…
1.3.6.1.4.1.20044.100.2.2.2.240Tablepm400frs04AlmclientSfpAlmDdmTablenot-accessiblecurrentList of pm400frs04AlmclientSfpAlmDdm Article
1.3.6.1.4.1.20044.100.2.2.2.240.1Rowpm400frs04AlmclientSfpAlmDdmEntrynot-accessiblecurrentRow definition for the pm400frs04AlmclientSfpAlmDdm table
1.3.6.1.4.1.20044.100.2.2.2.240.1.1Columnpm400frs04AlmclientSfpAlmDdmIndexread-onlycurrentIndex definition for the pm400frs04AlmclientSfpAlmDdm table
1.3.6.1.4.1.20044.100.2.2.2.240.1.2Columnpm400frs04AlmTxPwrLowAlaPortnread-onlycurrentClient Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in…
1.3.6.1.4.1.20044.100.2.2.2.240.1.3Columnpm400frs04AlmTxPwrHighAlaPortnread-onlycurrentClient Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm …
1.3.6.1.4.1.20044.100.2.2.2.240.1.4Columnpm400frs04AlmTxBiasLowAlaPortnread-onlycurrentClient Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm …
1.3.6.1.4.1.20044.100.2.2.2.240.1.5Columnpm400frs04AlmTxBiasHighAlaPortnread-onlycurrentClient Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar…
1.3.6.1.4.1.20044.100.2.2.2.240.1.6Columnpm400frs04AlmVccLowAlaPortnread-onlycurrentClient Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar…
1.3.6.1.4.1.20044.100.2.2.2.240.1.7Columnpm400frs04AlmVccHighAlaPortnread-onlycurrentClient Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al…
1.3.6.1.4.1.20044.100.2.2.2.240.1.8Columnpm400frs04AlmTempLowAlaPortnread-onlycurrentClient Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat…
1.3.6.1.4.1.20044.100.2.2.2.240.1.9Columnpm400frs04AlmTempHighAlaPortnread-onlycurrentClient Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic…
1.3.6.1.4.1.20044.100.2.2.2.240.1.16Columnpm400frs04AlmRxPwrLowAlaPortnread-onlycurrentClient Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind…
1.3.6.1.4.1.20044.100.2.2.2.240.1.17Columnpm400frs04AlmRxPwrHighAlaPortnread-onlycurrentClient Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i…
1.3.6.1.4.1.20044.100.2.2.3Nodepm400frs04AlmClientCrit
1.3.6.1.4.1.20044.100.2.2.3.8Tablepm400frs04AlmsynthAlmPortTablenot-accessiblecurrentList of pm400frs04AlmsynthAlmPort Article
1.3.6.1.4.1.20044.100.2.2.3.8.1Rowpm400frs04AlmsynthAlmPortEntrynot-accessiblecurrentRow definition for the pm400frs04AlmsynthAlmPort table
1.3.6.1.4.1.20044.100.2.2.3.8.1.1Columnpm400frs04AlmsynthAlmPortIndexread-onlycurrentIndex definition for the pm400frs04AlmsynthAlmPort table
1.3.6.1.4.1.20044.100.2.2.3.8.1.2Columnpm400frs04AlmSfpAbsentPortnread-onlycurrentClient Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver …
1.3.6.1.4.1.20044.100.2.2.3.8.1.3Columnpm400frs04AlmDdmAbsentPortnread-onlycurrentDDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates …
1.3.6.1.4.1.20044.100.2.2.3.8.1.5Columnpm400frs04AlmHwFailAccPortnread-onlycurrentClient HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro…
1.3.6.1.4.1.20044.100.2.2.3.8.1.6Columnpm400frs04AlmDwLsdPortnread-onlycurrentClient Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo…
1.3.6.1.4.1.20044.100.2.2.3.8.1.7Columnpm400frs04AlmClientLocalOosPortnread-onlycurrentLocal Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c…
1.3.6.1.4.1.20044.100.2.2.3.8.1.8Columnpm400frs04AlmClientRemoteOosPortnread-onlycurrentRemote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot…
1.3.6.1.4.1.20044.100.2.2.3.8.1.9Columnpm400frs04AlmDwCaisPortnread-onlycurrentClient AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is…
1.3.6.1.4.1.20044.100.2.2.3.8.1.10Columnpm400frs04AlmSfpDdmWarningPortnread-onlycurrentWarning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be…
1.3.6.1.4.1.20044.100.2.2.3.8.1.11Columnpm400frs04AlmSfpDdmAlmPortnread-onlycurrentAlarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de…
1.3.6.1.4.1.20044.100.2.2.3.8.1.13Columnpm400frs04AlmFailAccPortnread-onlycurrentClient Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> …
1.3.6.1.4.1.20044.100.2.2.3.8.1.17Columnpm400frs04AlmUpCsfPortnread-onlycurrentClient Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu…
1.3.6.1.4.1.20044.100.2.3Nodepm400frs04AlmLine
1.3.6.1.4.1.20044.100.2.3.1Nodepm400frs04AlmLineNurg
1.3.6.1.4.1.20044.100.2.3.1.184Tablepm400frs04AlmlineNetworkLaneAlarmWarning1Tablenot-accessiblecurrentList of pm400frs04AlmlineNetworkLaneAlarmWarning1 Article
1.3.6.1.4.1.20044.100.2.3.1.184.1Rowpm400frs04AlmlineNetworkLaneAlarmWarning1Entrynot-accessiblecurrentRow definition for the pm400frs04AlmlineNetworkLaneAlarmWarning1 table
1.3.6.1.4.1.20044.100.2.3.1.184.1.1Columnpm400frs04AlmlineNetworkLaneAlarmWarning1Indexread-onlycurrentIndex definition for the pm400frs04AlmlineNetworkLaneAlarmWarning1 table
1.3.6.1.4.1.20044.100.2.3.1.184.1.2Columnpm400frs04AlmLineRxPowerLowAlarmPortnread-onlycurrentLine Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat…
1.3.6.1.4.1.20044.100.2.3.1.184.1.3Columnpm400frs04AlmLineRxPowerLowWarningPortnread-onlycurrentLine Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind…
1.3.6.1.4.1.20044.100.2.3.1.184.1.4Columnpm400frs04AlmLineRxPowerHighWarningPortnread-onlycurrentLine Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i…
1.3.6.1.4.1.20044.100.2.3.1.184.1.5Columnpm400frs04AlmLineRxPowerHighAlarmPortnread-onlycurrentLine Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic…
1.3.6.1.4.1.20044.100.2.3.1.184.1.6Columnpm400frs04AlmLineLaserTempLowAlarmPortnread-onlycurrentLine Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>…
1.3.6.1.4.1.20044.100.2.3.1.184.1.7Columnpm400frs04AlmLineLaserTempLowWarningPortnread-onlycurrentLine Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel…
1.3.6.1.4.1.20044.100.2.3.1.184.1.8Columnpm400frs04AlmLineLaserTempHighWarningPortnread-onlycurrentLine Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H…
1.3.6.1.4.1.20044.100.2.3.1.184.1.9Columnpm400frs04AlmLineLaserTempHighAlarmPortnread-onlycurrentLine Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel…
1.3.6.1.4.1.20044.100.2.3.1.184.1.10Columnpm400frs04AlmLineTxPowerLowAlarmPortnread-onlycurrentLine Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica…
1.3.6.1.4.1.20044.100.2.3.1.184.1.11Columnpm400frs04AlmLineTxPowerLowWarningPortnread-onlycurrentLine Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in…
1.3.6.1.4.1.20044.100.2.3.1.184.1.12Columnpm400frs04AlmLineTxPowerHighWarningPortnread-onlycurrentLine Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning …
1.3.6.1.4.1.20044.100.2.3.1.184.1.13Columnpm400frs04AlmLineTxPowerHighAlarmPortnread-onlycurrentLine Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi…
1.3.6.1.4.1.20044.100.2.3.1.184.1.14Columnpm400frs04AlmLineBiasLowAlarmPortnread-onlycurrentLine Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i…
1.3.6.1.4.1.20044.100.2.3.1.184.1.15Columnpm400frs04AlmLineBiasLowWarningPortnread-onlycurrentLine Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni…
1.3.6.1.4.1.20044.100.2.3.1.184.1.16Columnpm400frs04AlmLineBiasHighWarningPortnread-onlycurrentLine Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War…
1.3.6.1.4.1.20044.100.2.3.1.184.1.17Columnpm400frs04AlmLineBiasHighAlarmPortnread-onlycurrentLine Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm…
1.3.6.1.4.1.20044.100.2.3.1.188Tablepm400frs04AlmlineNetworkLaneAlarmWarning2Tablenot-accessiblecurrentList of pm400frs04AlmlineNetworkLaneAlarmWarning2 Article
1.3.6.1.4.1.20044.100.2.3.1.188.1Rowpm400frs04AlmlineNetworkLaneAlarmWarning2Entrynot-accessiblecurrentRow definition for the pm400frs04AlmlineNetworkLaneAlarmWarning2 table
1.3.6.1.4.1.20044.100.2.3.1.188.1.1Columnpm400frs04AlmlineNetworkLaneAlarmWarning2Indexread-onlycurrentIndex definition for the pm400frs04AlmlineNetworkLaneAlarmWarning2 table
1.3.6.1.4.1.20044.100.2.3.1.188.1.2Columnpm400frs04AlmTxModulatorBiasLowAlarmPortnread-onlycurrentLine Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR…
1.3.6.1.4.1.20044.100.2.3.1.188.1.3Columnpm400frs04AlmTxModulatorBiasLowWarningPortnread-onlycurrentLine Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE…
1.3.6.1.4.1.20044.100.2.3.1.188.1.4Columnpm400frs04AlmTxModulatorBiasHighWarningPortnread-onlycurrentLine Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv …
1.3.6.1.4.1.20044.100.2.3.1.188.1.5Columnpm400frs04AlmTxModulatorBiasHighAlarmPortnread-onlycurrentLine Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE…
1.3.6.1.4.1.20044.100.2.3.1.188.1.6Columnpm400frs04AlmRxLaserTempLowAlarmPortnread-onlycurrentLine Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>…
1.3.6.1.4.1.20044.100.2.3.1.188.1.7Columnpm400frs04AlmRxLaserTempLowWarningPortnread-onlycurrentLine Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel…
1.3.6.1.4.1.20044.100.2.3.1.188.1.8Columnpm400frs04AlmRxLaserTempHighWarningPortnread-onlycurrentLine Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H…
1.3.6.1.4.1.20044.100.2.3.1.188.1.9Columnpm400frs04AlmRxLaserTempHighAlarmPortnread-onlycurrentLine Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel…
1.3.6.1.4.1.20044.100.2.3.1.188.1.10Columnpm400frs04AlmRxLaserOutputLowAlarmPortnread-onlycurrentLine Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al…
1.3.6.1.4.1.20044.100.2.3.1.188.1.11Columnpm400frs04AlmRxLaserOutputLowWarningPortnread-onlycurrentLine Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> …
1.3.6.1.4.1.20044.100.2.3.1.188.1.12Columnpm400frs04AlmRxLaserOutputHighWarningPortnread-onlycurrentLine Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help…
1.3.6.1.4.1.20044.100.2.3.1.188.1.13Columnpm400frs04AlmRxLaserOutputHighAlarmPortnread-onlycurrentLine Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> …
1.3.6.1.4.1.20044.100.2.3.1.188.1.14Columnpm400frs04AlmRxLaserBiasLowAlarmPortnread-onlycurrentLine Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar…
1.3.6.1.4.1.20044.100.2.3.1.188.1.15Columnpm400frs04AlmRxLaserBiasLowWarningPortnread-onlycurrentLine Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa…
1.3.6.1.4.1.20044.100.2.3.1.188.1.16Columnpm400frs04AlmRxLaserBiasHighWarningPortnread-onlycurrentLine Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> …
1.3.6.1.4.1.20044.100.2.3.1.188.1.17Columnpm400frs04AlmRxLaserBiasHighAlarmPortnread-onlycurrentLine Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al…
1.3.6.1.4.1.20044.100.2.3.2Nodepm400frs04AlmLineUrg
1.3.6.1.4.1.20044.100.2.3.2.196Tablepm400frs04AlmlineHostLaneFaultTablenot-accessiblecurrentList of pm400frs04AlmlineHostLaneFault Article
1.3.6.1.4.1.20044.100.2.3.2.196.1Rowpm400frs04AlmlineHostLaneFaultEntrynot-accessiblecurrentRow definition for the pm400frs04AlmlineHostLaneFault table
1.3.6.1.4.1.20044.100.2.3.2.196.1.1Columnpm400frs04AlmlineHostLaneFaultIndexread-onlycurrentIndex definition for the pm400frs04AlmlineHostLaneFault table
1.3.6.1.4.1.20044.100.2.3.2.196.1.2Columnpm400frs04AlmLineInputLossOfSignalPortnread-onlycurrentLine Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T…
1.3.6.1.4.1.20044.100.2.3.2.196.1.3Columnpm400frs04AlmLineLossOfFramePortnread-onlycurrentLine Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom…
1.3.6.1.4.1.20044.100.2.3.2.196.1.4Columnpm400frs04AlmLineSmBdiInsertedPortnread-onlycurrentLine SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect …
1.3.6.1.4.1.20044.100.2.3.2.196.1.5Columnpm400frs04AlmLineSmBdiDetectedPortnread-onlycurrentLine SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I…
1.3.6.1.4.1.20044.100.2.3.2.196.1.6Columnpm400frs04AlmLineSmIaeInsertedPortnread-onlycurrentLine SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment…
1.3.6.1.4.1.20044.100.2.3.2.196.1.7Columnpm400frs04AlmLineSmIaeDetectedPortnread-onlycurrentLine SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment …
1.3.6.1.4.1.20044.100.2.3.2.196.1.10Columnpm400frs04AlmLineEncryptionFailurePortnread-onlycurrentEncryption Failure :This OID indicates the encryption mechanism failed, impacting the traffic (the line traffic is down). <Help> This alarm indicates the encry…
1.3.6.1.4.1.20044.100.2.3.3Nodepm400frs04AlmLineCrit
1.3.6.1.4.1.20044.100.2.3.3.40Tablepm400frs04AlmsynthAlmLineTablenot-accessiblecurrentList of pm400frs04AlmsynthAlmLine Article
1.3.6.1.4.1.20044.100.2.3.3.40.1Rowpm400frs04AlmsynthAlmLineEntrynot-accessiblecurrentRow definition for the pm400frs04AlmsynthAlmLine table
1.3.6.1.4.1.20044.100.2.3.3.40.1.1Columnpm400frs04AlmsynthAlmLineIndexread-onlycurrentIndex definition for the pm400frs04AlmsynthAlmLine table
1.3.6.1.4.1.20044.100.2.3.3.40.1.2Columnpm400frs04AlmXfpAbsentPortnread-onlycurrentLine Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg…
1.3.6.1.4.1.20044.100.2.3.3.40.1.3Columnpm400frs04AlmXfpInitNotComplPortnread-onlycurrentLine Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr…
1.3.6.1.4.1.20044.100.2.3.3.40.1.5Columnpm400frs04AlmLineHwFailPortnread-onlycurrentLine Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr…
1.3.6.1.4.1.20044.100.2.3.3.40.1.6Columnpm400frs04AlmXfpTxOffPortnread-onlycurrentLine Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co…
1.3.6.1.4.1.20044.100.2.3.3.40.1.7Columnpm400frs04AlmLineLocalOosPortnread-onlycurrentLine Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service…
1.3.6.1.4.1.20044.100.2.3.3.40.1.9Columnpm400frs04AlmUpRdiInsPortnread-onlycurrentMS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic…
1.3.6.1.4.1.20044.100.2.3.3.40.1.10Columnpm400frs04AlmLineDdmWarningPortnread-onlycurrentWarning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has…
1.3.6.1.4.1.20044.100.2.3.3.40.1.11Columnpm400frs04AlmLineDdmAlmPortnread-onlycurrentAlarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been…
1.3.6.1.4.1.20044.100.2.3.3.40.1.13Columnpm400frs04AlmLineFailPortnread-onlycurrentLine Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm…
1.3.6.1.4.1.20044.100.2.3.3.40.1.17Columnpm400frs04AlmLineActivePortnread-onlycurrentLine Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI…
1.3.6.1.4.1.20044.100.3Nodepm400frs04measures
1.3.6.1.4.1.20044.100.3.1Nodepm400frs04MesrOther
1.3.6.1.4.1.20044.100.3.1.0Scalarpm400frs04Mesrsynth0read-onlydeprecatedNot Used :
1.3.6.1.4.1.20044.100.3.1.1Scalarpm400frs04Mesrsynth1read-onlydeprecatedNot Used :
1.3.6.1.4.1.20044.100.3.1.7Scalarpm400frs04MesrpmIntervalNumberread-onlycurrentPM Interval Counter :
1.3.6.1.4.1.20044.100.3.1.196Scalarpm400frs04MesrlineNetTxLaserOutputPwrAverageread-onlycurrentAverage Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital…
1.3.6.1.4.1.20044.100.3.1.197Scalarpm400frs04MesrlineNetTxLaserTempAverageread-onlycurrentAverage Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D…
1.3.6.1.4.1.20044.100.3.1.198Scalarpm400frs04MesrlineNetTxBiasCurrentAverageread-onlycurrentAverage Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di…
1.3.6.1.4.1.20044.100.3.1.199Scalarpm400frs04MesrlineNetRxInputPwrAverageread-onlycurrentAverage Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti…
1.3.6.1.4.1.20044.100.3.1.200Scalarpm400frs04MesrlineResidualChromaticDispAverageread-onlycurrentAverage Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion …
1.3.6.1.4.1.20044.100.3.1.201Scalarpm400frs04MesrlineDiffGroupDelayAverageread-onlycurrentAverage Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = ps)<Help> …
1.3.6.1.4.1.20044.100.3.1.202Scalarpm400frs04MesrlineQFactorAverageread-onlycurrentAverage Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB) <Help> This measure gi…
1.3.6.1.4.1.20044.100.3.1.203Scalarpm400frs04MesrlineCarrierFreqOffsetAverageread-onlycurrentAverage Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Uni…
1.3.6.1.4.1.20044.100.3.1.204Scalarpm400frs04MesrlineOsnrAverageread-onlycurrentAverage OSNR :This OID gives the average OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the av…
1.3.6.1.4.1.20044.100.3.1.212Scalarpm400frs04MesrlineNetTxLaserOutputPwrMinread-onlycurrentMin Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia…
1.3.6.1.4.1.20044.100.3.1.213Scalarpm400frs04MesrlineNetTxLaserTempMinread-onlycurrentMin Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (…
1.3.6.1.4.1.20044.100.3.1.214Scalarpm400frs04MesrlineNetTxBiasCurrentMinread-onlycurrentMin Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno…
1.3.6.1.4.1.20044.100.3.1.215Scalarpm400frs04MesrlineNetRxInputPwrMinread-onlycurrentMin Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo…
1.3.6.1.4.1.20044.100.3.1.216Scalarpm400frs04MesrlineResidualChromaticDispMinread-onlycurrentMin Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV…
1.3.6.1.4.1.20044.100.3.1.217Scalarpm400frs04MesrlineDiffGroupDelayMinread-onlycurrentMin Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p…
1.3.6.1.4.1.20044.100.3.1.218Scalarpm400frs04MesrlineQFactorMinread-onlycurrentMin Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t…
1.3.6.1.4.1.20044.100.3.1.219Scalarpm400frs04MesrlineCarrierFreqOffsetMinread-onlycurrentMin Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = …
1.3.6.1.4.1.20044.100.3.1.220Scalarpm400frs04MesrlineOsnrMinread-onlycurrentMin OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the minimu…
1.3.6.1.4.1.20044.100.3.1.228Scalarpm400frs04MesrlineNetTxLaserOutputPwrMaxread-onlycurrentMax Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia…
1.3.6.1.4.1.20044.100.3.1.229Scalarpm400frs04MesrlineNetTxLaserTempMaxread-onlycurrentMax Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (…
1.3.6.1.4.1.20044.100.3.1.230Scalarpm400frs04MesrlineNetTxBiasCurrentMaxread-onlycurrentMax Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno…
1.3.6.1.4.1.20044.100.3.1.231Scalarpm400frs04MesrlineNetRxInputPwrMaxread-onlycurrentMax Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo…
1.3.6.1.4.1.20044.100.3.1.232Scalarpm400frs04MesrlineResidualChromaticDispMaxread-onlycurrentMax Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV…
1.3.6.1.4.1.20044.100.3.1.233Scalarpm400frs04MesrlineDiffGroupDelayMaxread-onlycurrentMax Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p…
1.3.6.1.4.1.20044.100.3.1.234Scalarpm400frs04MesrlineQFactorMaxread-onlycurrentMax Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t…
1.3.6.1.4.1.20044.100.3.1.235Scalarpm400frs04MesrlineCarrierFreqOffsetMaxread-onlycurrentMax Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = …
1.3.6.1.4.1.20044.100.3.1.236Scalarpm400frs04MesrlineOsnrMaxread-onlycurrentMax OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the maximu…
1.3.6.1.4.1.20044.100.3.1.240Scalarpm400frs04Mesrtrscv1Tempread-onlycurrentClient1 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256…
1.3.6.1.4.1.20044.100.3.1.241Scalarpm400frs04Mesrtrscv2Tempread-onlycurrentClient2 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256…
1.3.6.1.4.1.20044.100.3.1.242Scalarpm400frs04Mesrtrscv3Tempread-onlycurrentClient3 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256…
1.3.6.1.4.1.20044.100.3.1.243Scalarpm400frs04Mesrtrscv4Tempread-onlycurrentClient4 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256…
1.3.6.1.4.1.20044.100.3.1.244Scalarpm400frs04Mesrtrscv5Tempread-onlycurrentClient5 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256…
1.3.6.1.4.1.20044.100.3.1.245Scalarpm400frs04Mesrtrscv6Tempread-onlycurrentClient6 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256…
1.3.6.1.4.1.20044.100.3.1.246Scalarpm400frs04Mesrtrscv1PowerSupplyread-onlycurrentClient1 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/…
1.3.6.1.4.1.20044.100.3.1.247Scalarpm400frs04Mesrtrscv2PowerSupplyread-onlycurrentClient2 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/…
1.3.6.1.4.1.20044.100.3.1.248Scalarpm400frs04Mesrtrscv3PowerSupplyread-onlycurrentClient3 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/…
1.3.6.1.4.1.20044.100.3.1.249Scalarpm400frs04Mesrtrscv4PowerSupplyread-onlycurrentClient4 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/…
1.3.6.1.4.1.20044.100.3.1.250Scalarpm400frs04Mesrtrscv5PowerSupplyread-onlycurrentClient5 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/…
1.3.6.1.4.1.20044.100.3.1.251Scalarpm400frs04Mesrtrscv6PowerSupplyread-onlycurrentClient6 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/…
1.3.6.1.4.1.20044.100.3.1.252Scalarpm400frs04MesrregVoltageread-onlycurrentRegulator Voltage :This OID gives the voltage value of the Regulator (Voltage = AV_U16) (Unit = mV) <Help> This Measure gives the Regulator Voltage
1.3.6.1.4.1.20044.100.3.1.253Scalarpm400frs04MesrregCurrentread-onlycurrentRegulator Current :This OID gives the current value of the Regulator (Current = AV_U16/1000) (Unit = A) <Help> This Measure gives the Regulator Current
1.3.6.1.4.1.20044.100.3.1.254Scalarpm400frs04MesrregTempread-onlycurrentRegulator Temperature :This OID gives the temperature value of the Regulator (Temperature = AV_S16) (Unit = C) <Help> This Measure gives the Regulator Temperat…
1.3.6.1.4.1.20044.100.3.1.500Scalarpm400frs04MesrmoduleTempMinread-onlycurrentMin Module Temperature :This OID gives the minimum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the minimum …
1.3.6.1.4.1.20044.100.3.1.501Scalarpm400frs04MesrmoduleTempMaxread-onlycurrentMax Module Temperature :This OID gives the maximum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the maximum …
1.3.6.1.4.1.20044.100.3.2Nodepm400frs04MesrClient
1.3.6.1.4.1.20044.100.3.2.16Tablepm400frs04MesrclientTxPwrMinTablenot-accessiblecurrentList of pm400frs04MesrclientTxPwrMin Article
1.3.6.1.4.1.20044.100.3.2.16.1Rowpm400frs04MesrclientTxPwrMinEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientTxPwrMin table
1.3.6.1.4.1.20044.100.3.2.16.1.1Columnpm400frs04MesrclientTxPwrMinIndexread-onlycurrentIndex definition for the pm400frs04MesrclientTxPwrMin table
1.3.6.1.4.1.20044.100.3.2.16.1.2Columnpm400frs04MesrclientTxPwrMinPortnread-onlycurrentMin Client Trscv Tx Power Per Lane :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit…
1.3.6.1.4.1.20044.100.3.2.48Tablepm400frs04MesrclientRxPwrMinTablenot-accessiblecurrentList of pm400frs04MesrclientRxPwrMin Article
1.3.6.1.4.1.20044.100.3.2.48.1Rowpm400frs04MesrclientRxPwrMinEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientRxPwrMin table
1.3.6.1.4.1.20044.100.3.2.48.1.1Columnpm400frs04MesrclientRxPwrMinIndexread-onlycurrentIndex definition for the pm400frs04MesrclientRxPwrMin table
1.3.6.1.4.1.20044.100.3.2.48.1.2Columnpm400frs04MesrclientRxPwrMinPortnread-onlycurrentMin Client Trscv Rx Power Per Lane :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read from the DDM (Digita…
1.3.6.1.4.1.20044.100.3.2.80Tablepm400frs04MesrclientTxPwrMaxTablenot-accessiblecurrentList of pm400frs04MesrclientTxPwrMax Article
1.3.6.1.4.1.20044.100.3.2.80.1Rowpm400frs04MesrclientTxPwrMaxEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientTxPwrMax table
1.3.6.1.4.1.20044.100.3.2.80.1.1Columnpm400frs04MesrclientTxPwrMaxIndexread-onlycurrentIndex definition for the pm400frs04MesrclientTxPwrMax table
1.3.6.1.4.1.20044.100.3.2.80.1.2Columnpm400frs04MesrclientTxPwrMaxPortnread-onlycurrentMax Client Trscv Tx Power Per Lane :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit…
1.3.6.1.4.1.20044.100.3.2.112Tablepm400frs04MesrclientRxPwrMaxTablenot-accessiblecurrentList of pm400frs04MesrclientRxPwrMax Article
1.3.6.1.4.1.20044.100.3.2.112.1Rowpm400frs04MesrclientRxPwrMaxEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientRxPwrMax table
1.3.6.1.4.1.20044.100.3.2.112.1.1Columnpm400frs04MesrclientRxPwrMaxIndexread-onlycurrentIndex definition for the pm400frs04MesrclientRxPwrMax table
1.3.6.1.4.1.20044.100.3.2.112.1.2Columnpm400frs04MesrclientRxPwrMaxPortnread-onlycurrentMax Client Trscv Rx Power Per Lane :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital …
1.3.6.1.4.1.20044.100.3.2.256Tablepm400frs04MesrclientTxCompositePwrTablenot-accessiblecurrentList of pm400frs04MesrclientTxCompositePwr Article
1.3.6.1.4.1.20044.100.3.2.256.1Rowpm400frs04MesrclientTxCompositePwrEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientTxCompositePwr table
1.3.6.1.4.1.20044.100.3.2.256.1.1Columnpm400frs04MesrclientTxCompositePwrIndexread-onlycurrentIndex definition for the pm400frs04MesrclientTxCompositePwr table
1.3.6.1.4.1.20044.100.3.2.256.1.2Columnpm400frs04MesrclientTxCompositePwrPortnread-onlycurrentClient Composite Tx Power :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from the DDM (…
1.3.6.1.4.1.20044.100.3.2.288Tablepm400frs04MesrclientRxCompositePwrTablenot-accessiblecurrentList of pm400frs04MesrclientRxCompositePwr Article
1.3.6.1.4.1.20044.100.3.2.288.1Rowpm400frs04MesrclientRxCompositePwrEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientRxCompositePwr table
1.3.6.1.4.1.20044.100.3.2.288.1.1Columnpm400frs04MesrclientRxCompositePwrIndexread-onlycurrentIndex definition for the pm400frs04MesrclientRxCompositePwr table
1.3.6.1.4.1.20044.100.3.2.288.1.2Columnpm400frs04MesrclientRxCompositePwrPortnread-onlycurrentClient Composite Rx Power :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from the DDM (Di…
1.3.6.1.4.1.20044.100.3.2.416Tablepm400frs04MesrclientTempMinTablenot-accessiblecurrentList of pm400frs04MesrclientTempMin Article
1.3.6.1.4.1.20044.100.3.2.416.1Rowpm400frs04MesrclientTempMinEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientTempMin table
1.3.6.1.4.1.20044.100.3.2.416.1.1Columnpm400frs04MesrclientTempMinIndexread-onlycurrentIndex definition for the pm400frs04MesrclientTempMin table
1.3.6.1.4.1.20044.100.3.2.416.1.2Columnpm400frs04MesrclientTempMinPortnread-onlycurrentMin Client Trscv Temperature :This OID gives the minimum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper…
1.3.6.1.4.1.20044.100.3.2.448Tablepm400frs04MesrclientTempMaxTablenot-accessiblecurrentList of pm400frs04MesrclientTempMax Article
1.3.6.1.4.1.20044.100.3.2.448.1Rowpm400frs04MesrclientTempMaxEntrynot-accessiblecurrentRow definition for the pm400frs04MesrclientTempMax table
1.3.6.1.4.1.20044.100.3.2.448.1.1Columnpm400frs04MesrclientTempMaxIndexread-onlycurrentIndex definition for the pm400frs04MesrclientTempMax table
1.3.6.1.4.1.20044.100.3.2.448.1.2Columnpm400frs04MesrclientTempMaxPortnread-onlycurrentMax Client Trscv Temperature :This OID gives the maximum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper…
1.3.6.1.4.1.20044.100.3.3Nodepm400frs04MesrLine
1.3.6.1.4.1.20044.100.3.3.12Scalarpm400frs04MesrlineMsaTempread-onlycurrentLine Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/2…
1.3.6.1.4.1.20044.100.3.3.13Scalarpm400frs04MesrlineMsa3v3Voltageread-onlycurrentLine Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000) (U…
1.3.6.1.4.1.20044.100.3.3.144Tablepm400frs04MesrlineNetTxLaserOutputPwrTablenot-accessiblecurrentList of pm400frs04MesrlineNetTxLaserOutputPwr Article
1.3.6.1.4.1.20044.100.3.3.144.1Rowpm400frs04MesrlineNetTxLaserOutputPwrEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineNetTxLaserOutputPwr table
1.3.6.1.4.1.20044.100.3.3.144.1.1Columnpm400frs04MesrlineNetTxLaserOutputPwrIndexread-onlycurrentIndex definition for the pm400frs04MesrlineNetTxLaserOutputPwr table
1.3.6.1.4.1.20044.100.3.3.144.1.2Columnpm400frs04MesrlineNetTxLaserOutputPwrPortnread-onlycurrentCurrent Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =…
1.3.6.1.4.1.20044.100.3.3.148Tablepm400frs04MesrlineNetTxLaserTempTablenot-accessiblecurrentList of pm400frs04MesrlineNetTxLaserTemp Article
1.3.6.1.4.1.20044.100.3.3.148.1Rowpm400frs04MesrlineNetTxLaserTempEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineNetTxLaserTemp table
1.3.6.1.4.1.20044.100.3.3.148.1.1Columnpm400frs04MesrlineNetTxLaserTempIndexread-onlycurrentIndex definition for the pm400frs04MesrlineNetTxLaserTemp table
1.3.6.1.4.1.20044.100.3.3.148.1.2Columnpm400frs04MesrlineNetTxLaserTempPortnread-onlycurrentCurrent Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin…
1.3.6.1.4.1.20044.100.3.3.152Tablepm400frs04MesrlineNetTxBiasCurrentTablenot-accessiblecurrentList of pm400frs04MesrlineNetTxBiasCurrent Article
1.3.6.1.4.1.20044.100.3.3.152.1Rowpm400frs04MesrlineNetTxBiasCurrentEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineNetTxBiasCurrent table
1.3.6.1.4.1.20044.100.3.3.152.1.1Columnpm400frs04MesrlineNetTxBiasCurrentIndexread-onlycurrentIndex definition for the pm400frs04MesrlineNetTxBiasCurrent table
1.3.6.1.4.1.20044.100.3.3.152.1.2Columnpm400frs04MesrlineNetTxBiasCurrentPortnread-onlycurrentCurrent Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_…
1.3.6.1.4.1.20044.100.3.3.156Tablepm400frs04MesrlineNetRxInputPwrTablenot-accessiblecurrentList of pm400frs04MesrlineNetRxInputPwr Article
1.3.6.1.4.1.20044.100.3.3.156.1Rowpm400frs04MesrlineNetRxInputPwrEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineNetRxInputPwr table
1.3.6.1.4.1.20044.100.3.3.156.1.1Columnpm400frs04MesrlineNetRxInputPwrIndexread-onlycurrentIndex definition for the pm400frs04MesrlineNetRxInputPwr table
1.3.6.1.4.1.20044.100.3.3.156.1.2Columnpm400frs04MesrlineNetRxInputPwrPortnread-onlycurrentCurrent Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/10…
1.3.6.1.4.1.20044.100.3.3.160Tablepm400frs04MesrlineResidualChromaticDispTablenot-accessiblecurrentList of pm400frs04MesrlineResidualChromaticDisp Article
1.3.6.1.4.1.20044.100.3.3.160.1Rowpm400frs04MesrlineResidualChromaticDispEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineResidualChromaticDisp table
1.3.6.1.4.1.20044.100.3.3.160.1.1Columnpm400frs04MesrlineResidualChromaticDispIndexread-onlycurrentIndex definition for the pm400frs04MesrlineResidualChromaticDisp table
1.3.6.1.4.1.20044.100.3.3.160.1.2Columnpm400frs04MesrlineResidualChromaticDispPortnread-onlycurrentCurrent Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_S16) (Unit = ps/nm)<Help…
1.3.6.1.4.1.20044.100.3.3.164Tablepm400frs04MesrlineDiffGroupDelayTablenot-accessiblecurrentList of pm400frs04MesrlineDiffGroupDelay Article
1.3.6.1.4.1.20044.100.3.3.164.1Rowpm400frs04MesrlineDiffGroupDelayEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineDiffGroupDelay table
1.3.6.1.4.1.20044.100.3.3.164.1.1Columnpm400frs04MesrlineDiffGroupDelayIndexread-onlycurrentIndex definition for the pm400frs04MesrlineDiffGroupDelay table
1.3.6.1.4.1.20044.100.3.3.164.1.2Columnpm400frs04MesrlineDiffGroupDelayPortnread-onlycurrentCurrent Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Delay = AV_S16) (Unit = ps)<Help> This measure giv…
1.3.6.1.4.1.20044.100.3.3.168Tablepm400frs04MesrlineQFactorTablenot-accessiblecurrentList of pm400frs04MesrlineQFactor Article
1.3.6.1.4.1.20044.100.3.3.168.1Rowpm400frs04MesrlineQFactorEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineQFactor table
1.3.6.1.4.1.20044.100.3.3.168.1.1Columnpm400frs04MesrlineQFactorIndexread-onlycurrentIndex definition for the pm400frs04MesrlineQFactor table
1.3.6.1.4.1.20044.100.3.3.168.1.2Columnpm400frs04MesrlineQFactorPortnread-onlycurrentCurrent Q Factor :This OID gives the current Q Factor on the Line interface (Q Factor = AV_U16) (Unit = dB) <Help> This measure gives the current Q Factor on t…
1.3.6.1.4.1.20044.100.3.3.172Tablepm400frs04MesrlineCarrierFreqOffsetTablenot-accessiblecurrentList of pm400frs04MesrlineCarrierFreqOffset Article
1.3.6.1.4.1.20044.100.3.3.172.1Rowpm400frs04MesrlineCarrierFreqOffsetEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineCarrierFreqOffset table
1.3.6.1.4.1.20044.100.3.3.172.1.1Columnpm400frs04MesrlineCarrierFreqOffsetIndexread-onlycurrentIndex definition for the pm400frs04MesrlineCarrierFreqOffset table
1.3.6.1.4.1.20044.100.3.3.172.1.2Columnpm400frs04MesrlineCarrierFreqOffsetPortnread-onlycurrentCurrent Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Offset = AV_S16) (Unit = MHz)<Help> This measure g…
1.3.6.1.4.1.20044.100.3.3.176Tablepm400frs04MesrlineOsnrTablenot-accessiblecurrentList of pm400frs04MesrlineOsnr Article
1.3.6.1.4.1.20044.100.3.3.176.1Rowpm400frs04MesrlineOsnrEntrynot-accessiblecurrentRow definition for the pm400frs04MesrlineOsnr table
1.3.6.1.4.1.20044.100.3.3.176.1.1Columnpm400frs04MesrlineOsnrIndexread-onlycurrentIndex definition for the pm400frs04MesrlineOsnr table
1.3.6.1.4.1.20044.100.3.3.176.1.2Columnpm400frs04MesrlineOsnrPortnread-onlycurrentCurrent OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interf…
1.3.6.1.4.1.20044.100.3.3.492Scalarpm400frs04MesrlineTempMinread-onlycurrentMin Line Trscv Temperature :This OID gives the minimum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur…
1.3.6.1.4.1.20044.100.3.3.496Scalarpm400frs04MesrlineTempMaxread-onlycurrentMax Line Trscv Temperature :This OID gives the maximum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur…
1.3.6.1.4.1.20044.100.4Nodepm400frs04counters
1.3.6.1.4.1.20044.100.4.1Nodepm400frs04CntOther
1.3.6.1.4.1.20044.100.4.2Nodepm400frs04CntClient
1.3.6.1.4.1.20044.100.4.2.112Tablepm400frs04CntclientInputErrorCounterTablenot-accessiblecurrentList of pm400frs04CntclientInputErrorCounter Article
1.3.6.1.4.1.20044.100.4.2.112.1Rowpm400frs04CntclientInputErrorCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntclientInputErrorCounter table
1.3.6.1.4.1.20044.100.4.2.112.1.1Columnpm400frs04CntclientInputErrorCounterIndexread-onlycurrentIndex definition for the pm400frs04CntclientInputErrorCounter table
1.3.6.1.4.1.20044.100.4.2.112.1.2Columnpm400frs04CntclientInputErrorCounterValuePortnread-onlycurrentClient Input Errors :This counter gives the number of SM-BIP8 (OTU4) or 66B/64B disparities (100GbE) on client port <Help> This counter gives the number of SM-…
1.3.6.1.4.1.20044.100.4.2.112.1.3Columnpm400frs04CntclientInputErrorCounterErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.2.112.1.4Columnpm400frs04CntclientInputErrorCounterOverloadPortnread-onlycurrentClient Counter Overload :This OID when set indicates a BIP8 error counter overload on Port
1.3.6.1.4.1.20044.100.4.2.144Tablepm400frs04CntclientCbipCounterTablenot-accessiblecurrentList of pm400frs04CntclientCbipCounter Article
1.3.6.1.4.1.20044.100.4.2.144.1Rowpm400frs04CntclientCbipCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntclientCbipCounter table
1.3.6.1.4.1.20044.100.4.2.144.1.1Columnpm400frs04CntclientCbipCounterIndexread-onlycurrentIndex definition for the pm400frs04CntclientCbipCounter table
1.3.6.1.4.1.20044.100.4.2.144.1.2Columnpm400frs04CntclientCbipCounterValuePortnread-onlycurrentClient Output Errors :This counter gives the number of SM-BIP8 (OTU4) or 66B/64B disparities (100GbE) on client port <Help> This counter gives the number of SM…
1.3.6.1.4.1.20044.100.4.2.144.1.3Columnpm400frs04CntclientCbipCounterErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.2.144.1.4Columnpm400frs04CntclientCbipCounterOverloadPortnread-onlycurrentClient CBIP Counter Overload :This OID when set indicates a BIP8 error counter overload on Port
1.3.6.1.4.1.20044.100.4.3Nodepm400frs04CntLine
1.3.6.1.4.1.20044.100.4.3.192Tablepm400frs04CntlocalLineSmBip8ErrorCounterTablenot-accessiblecurrentList of pm400frs04CntlocalLineSmBip8ErrorCounter Article
1.3.6.1.4.1.20044.100.4.3.192.1Rowpm400frs04CntlocalLineSmBip8ErrorCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntlocalLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.100.4.3.192.1.1Columnpm400frs04CntlocalLineSmBip8ErrorCounterIndexread-onlycurrentIndex definition for the pm400frs04CntlocalLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.100.4.3.192.1.2Columnpm400frs04CntlocalLineSmBip8ErrorCounterValuePortnread-onlycurrentUncorrected FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (resi…
1.3.6.1.4.1.20044.100.4.3.192.1.3Columnpm400frs04CntlocalLineSmBip8ErrorCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the B1 error counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.3.192.1.4Columnpm400frs04CntlocalLineSmBip8ErrorCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a B1 error counter overload on Port
1.3.6.1.4.1.20044.100.4.3.193Tablepm400frs04CntlocalLineFecCorrectedErrorsCounterTablenot-accessiblecurrentList of pm400frs04CntlocalLineFecCorrectedErrorsCounter Article
1.3.6.1.4.1.20044.100.4.3.193.1Rowpm400frs04CntlocalLineFecCorrectedErrorsCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntlocalLineFecCorrectedErrorsCounter table
1.3.6.1.4.1.20044.100.4.3.193.1.1Columnpm400frs04CntlocalLineFecCorrectedErrorsCounterIndexread-onlycurrentIndex definition for the pm400frs04CntlocalLineFecCorrectedErrorsCounter table
1.3.6.1.4.1.20044.100.4.3.193.1.2Columnpm400frs04CntlocalLineFecCorrectedErrorsCounterValuePortnread-onlycurrentLine Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate…
1.3.6.1.4.1.20044.100.4.3.193.1.3Columnpm400frs04CntlocalLineFecCorrectedErrorsCounterErrorPortnread-onlycurrentFEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line
1.3.6.1.4.1.20044.100.4.3.193.1.4Columnpm400frs04CntlocalLineFecCorrectedErrorsCounterOverloadPortnread-onlycurrentFEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line
1.3.6.1.4.1.20044.100.4.3.194Tablepm400frs04CntremoteLineSmBip8ErrorCounterTablenot-accessiblecurrentList of pm400frs04CntremoteLineSmBip8ErrorCounter Article
1.3.6.1.4.1.20044.100.4.3.194.1Rowpm400frs04CntremoteLineSmBip8ErrorCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntremoteLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.100.4.3.194.1.1Columnpm400frs04CntremoteLineSmBip8ErrorCounterIndexread-onlycurrentIndex definition for the pm400frs04CntremoteLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.100.4.3.194.1.2Columnpm400frs04CntremoteLineSmBip8ErrorCounterValuePortnread-onlycurrentRemote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error…
1.3.6.1.4.1.20044.100.4.3.194.1.3Columnpm400frs04CntremoteLineSmBip8ErrorCounterErrorPortnread-onlycurrentRemote Counter Error :
1.3.6.1.4.1.20044.100.4.3.194.1.4Columnpm400frs04CntremoteLineSmBip8ErrorCounterOverloadPortnread-onlycurrentRemote Counter Overload :
1.3.6.1.4.1.20044.100.4.3.195Tablepm400frs04CntlineDfrmTimCntTablenot-accessiblecurrentList of pm400frs04CntlineDfrmTimCnt Article
1.3.6.1.4.1.20044.100.4.3.195.1Rowpm400frs04CntlineDfrmTimCntEntrynot-accessiblecurrentRow definition for the pm400frs04CntlineDfrmTimCnt table
1.3.6.1.4.1.20044.100.4.3.195.1.1Columnpm400frs04CntlineDfrmTimCntIndexread-onlycurrentIndex definition for the pm400frs04CntlineDfrmTimCnt table
1.3.6.1.4.1.20044.100.4.3.195.1.2Columnpm400frs04CntlineDfrmTimCntValuePortnread-onlycurrentLine Timer Counter :
1.3.6.1.4.1.20044.100.4.3.195.1.3Columnpm400frs04CntlineDfrmTimCntErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.3.195.1.4Columnpm400frs04CntlineDfrmTimCntOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.100.4.3.196Tablepm400frs04CntlocalLineTrscvPreSdFecErrorCounterTablenot-accessiblecurrentList of pm400frs04CntlocalLineTrscvPreSdFecErrorCounter Article
1.3.6.1.4.1.20044.100.4.3.196.1Rowpm400frs04CntlocalLineTrscvPreSdFecErrorCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntlocalLineTrscvPreSdFecErrorCounter table
1.3.6.1.4.1.20044.100.4.3.196.1.1Columnpm400frs04CntlocalLineTrscvPreSdFecErrorCounterIndexread-onlycurrentIndex definition for the pm400frs04CntlocalLineTrscvPreSdFecErrorCounter table
1.3.6.1.4.1.20044.100.4.3.196.1.2Columnpm400frs04CntlocalLineTrscvPreSdFecErrorCounterValuePortnread-onlycurrentPre FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC
1.3.6.1.4.1.20044.100.4.3.196.1.3Columnpm400frs04CntlocalLineTrscvPreSdFecErrorCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.3.196.1.4Columnpm400frs04CntlocalLineTrscvPreSdFecErrorCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.100.4.3.197Tablepm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounterTablenot-accessiblecurrentList of pm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounter Article
1.3.6.1.4.1.20044.100.4.3.197.1Rowpm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounter table
1.3.6.1.4.1.20044.100.4.3.197.1.1Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounterIndexread-onlycurrentIndex definition for the pm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounter table
1.3.6.1.4.1.20044.100.4.3.197.1.2Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortnread-onlycurrentUncorrected FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (resi…
1.3.6.1.4.1.20044.100.4.3.197.1.3Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.3.197.1.4Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.100.4.3.198Tablepm400frs04CntlocalLineTrscvPreSdFecBitCounterTablenot-accessiblecurrentList of pm400frs04CntlocalLineTrscvPreSdFecBitCounter Article
1.3.6.1.4.1.20044.100.4.3.198.1Rowpm400frs04CntlocalLineTrscvPreSdFecBitCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntlocalLineTrscvPreSdFecBitCounter table
1.3.6.1.4.1.20044.100.4.3.198.1.1Columnpm400frs04CntlocalLineTrscvPreSdFecBitCounterIndexread-onlycurrentIndex definition for the pm400frs04CntlocalLineTrscvPreSdFecBitCounter table
1.3.6.1.4.1.20044.100.4.3.198.1.2Columnpm400frs04CntlocalLineTrscvPreSdFecBitCounterValuePortnread-onlycurrentPre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis…
1.3.6.1.4.1.20044.100.4.3.198.1.3Columnpm400frs04CntlocalLineTrscvPreSdFecBitCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.3.198.1.4Columnpm400frs04CntlocalLineTrscvPreSdFecBitCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.100.4.3.199Tablepm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounterTablenot-accessiblecurrentList of pm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounter Article
1.3.6.1.4.1.20044.100.4.3.199.1Rowpm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounterEntrynot-accessiblecurrentRow definition for the pm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounter table
1.3.6.1.4.1.20044.100.4.3.199.1.1Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounterIndexread-onlycurrentIndex definition for the pm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounter table
1.3.6.1.4.1.20044.100.4.3.199.1.2Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounterValuePortnread-onlycurrentUncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft…
1.3.6.1.4.1.20044.100.4.3.199.1.3Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.100.4.3.199.1.4Columnpm400frs04CntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.100.6Nodepm400frs04controlsWrite
1.3.6.1.4.1.20044.100.6.1Nodepm400frs04CtrlOther
1.3.6.1.4.1.20044.100.6.1.1Nodepm400frs04CtrlconfMgnt1
1.3.6.1.4.1.20044.100.6.1.1.1Scalarpm400frs04CtrlConf1Load1read-writecurrentLoad Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM.
1.3.6.1.4.1.20044.100.6.1.1.2Scalarpm400frs04CtrlConf2Load1read-writecurrentLoad Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM.
1.3.6.1.4.1.20044.100.6.1.1.10Scalarpm400frs04CtrlConf2Flash1read-writecurrentWrite Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura…
1.3.6.1.4.1.20044.100.6.1.1.14Scalarpm400frs04CtrlConf2Clear1read-writecurrentClear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o…
1.3.6.1.4.1.20044.100.6.1.4Nodepm400frs04Ctrlsynth4
1.3.6.1.4.1.20044.100.6.1.4.1Scalarpm400frs04CtrlCorrelatOnread-writecurrentEnable Alarm Correlation :This OID enables the alarm correlation in the PM.
1.3.6.1.4.1.20044.100.6.1.4.2Scalarpm400frs04CtrlCorrelatOffread-writecurrentDisable Alarm Correlation :This OID disables the alarm correlation in the PM.
1.3.6.1.4.1.20044.100.6.1.5Nodepm400frs04CtrlswMgnt
1.3.6.1.4.1.20044.100.6.1.5.2Scalarpm400frs04CtrlColdResetread-writecurrentPM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> …
1.3.6.1.4.1.20044.100.6.1.5.3Scalarpm400frs04CtrlWarmResetread-writecurrentPM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th…
1.3.6.1.4.1.20044.100.6.1.5.5Scalarpm400frs04CtrlLoadSwBank1read-writecurrentSet Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW…
1.3.6.1.4.1.20044.100.6.1.5.6Scalarpm400frs04CtrlLoadSwBank2read-writecurrentSet Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S…
1.3.6.1.4.1.20044.100.6.1.6Nodepm400frs04CtrlgwMgnt
1.3.6.1.4.1.20044.100.6.1.6.1Scalarpm400frs04CtrlCurrentGwResetread-writecurrentActive Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting.
1.3.6.1.4.1.20044.100.6.1.6.5Scalarpm400frs04CtrlLoadGwBank1read-writecurrentSet Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.100.6.1.6.6Scalarpm400frs04CtrlLoadGwBank2read-writecurrentSet Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.100.6.1.6.7Scalarpm400frs04CtrlLoadGwBank3read-writecurrentSet Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.100.6.1.6.8Scalarpm400frs04CtrlLoadGwBank4read-writecurrentSet Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.100.6.1.192Nodepm400frs04CtrlledTest
1.3.6.1.4.1.20044.100.6.1.192.1Scalarpm400frs04CtrlGreenLedread-writecurrentGreen Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green
1.3.6.1.4.1.20044.100.6.1.192.2Scalarpm400frs04CtrlRedLedread-writecurrentRed Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red
1.3.6.1.4.1.20044.100.6.1.192.3Scalarpm400frs04CtrlLedOffread-writecurrentLeds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF
1.3.6.1.4.1.20044.100.6.1.201Nodepm400frs04CtrlinitSwitchMarvell
1.3.6.1.4.1.20044.100.6.1.201.1Scalarpm400frs04CtrlInitSwitchMarvellread-writecurrentSwitch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit…
1.3.6.1.4.1.20044.100.6.1.259Nodepm400frs04CtrlresetCount
1.3.6.1.4.1.20044.100.6.1.259.1Scalarpm400frs04CtrlResetcountread-writecurrentModule Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module
1.3.6.1.4.1.20044.100.6.1.260Nodepm400frs04CtrlresetRmon
1.3.6.1.4.1.20044.100.6.1.260.1Scalarpm400frs04CtrlResetrmonread-writecurrentModule Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module
1.3.6.1.4.1.20044.100.6.1.261Nodepm400frs04CtrlresetMeasurements
1.3.6.1.4.1.20044.100.6.1.261.1Scalarpm400frs04CtrlResetmeasurementsread-writecurrentManagement Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management
1.3.6.1.4.1.20044.100.6.2Nodepm400frs04CtrlClient
1.3.6.1.4.1.20044.100.6.2.16Tablepm400frs04CtrlaccessLoopTablenot-accessiblecurrentList of pm400frs04CtrlaccessLoop Article
1.3.6.1.4.1.20044.100.6.2.16.1Rowpm400frs04CtrlaccessLoopEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlaccessLoop table
1.3.6.1.4.1.20044.100.6.2.16.1.1Columnpm400frs04CtrlaccessLoopIndexread-onlycurrentIndex definition for the pm400frs04CtrlaccessLoop table
1.3.6.1.4.1.20044.100.6.2.16.1.2Columnpm400frs04CtrlaccessLoopPortnread-writecurrentClient Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help…
1.3.6.1.4.1.20044.100.6.2.17Tablepm400frs04CtrlclientLoopToLineTablenot-accessiblecurrentList of pm400frs04CtrlclientLoopToLine Article
1.3.6.1.4.1.20044.100.6.2.17.1Rowpm400frs04CtrlclientLoopToLineEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlclientLoopToLine table
1.3.6.1.4.1.20044.100.6.2.17.1.1Columnpm400frs04CtrlclientLoopToLineIndexread-onlycurrentIndex definition for the pm400frs04CtrlclientLoopToLine table
1.3.6.1.4.1.20044.100.6.2.17.1.2Columnpm400frs04CtrlclientLoopToLinePortnread-writecurrentClient Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena…
1.3.6.1.4.1.20044.100.6.2.21Tablepm400frs04CtrlcsfUpInsTablenot-accessiblecurrentList of pm400frs04CtrlcsfUpIns Article
1.3.6.1.4.1.20044.100.6.2.21.1Rowpm400frs04CtrlcsfUpInsEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlcsfUpIns table
1.3.6.1.4.1.20044.100.6.2.21.1.1Columnpm400frs04CtrlcsfUpInsIndexread-onlycurrentIndex definition for the pm400frs04CtrlcsfUpIns table
1.3.6.1.4.1.20044.100.6.2.21.1.2Columnpm400frs04CtrlcsfUpInsPortnread-writecurrentClient Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo…
1.3.6.1.4.1.20044.100.6.2.22Tablepm400frs04CtrlcaisDwInsTablenot-accessiblecurrentList of pm400frs04CtrlcaisDwIns Article
1.3.6.1.4.1.20044.100.6.2.22.1Rowpm400frs04CtrlcaisDwInsEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlcaisDwIns table
1.3.6.1.4.1.20044.100.6.2.22.1.1Columnpm400frs04CtrlcaisDwInsIndexread-onlycurrentIndex definition for the pm400frs04CtrlcaisDwIns table
1.3.6.1.4.1.20044.100.6.2.22.1.2Columnpm400frs04CtrlcaisDwInsPortnread-writecurrentClient AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port
1.3.6.1.4.1.20044.100.6.2.23Tablepm400frs04CtrlbistInsertTrafficTestTablenot-accessiblecurrentList of pm400frs04CtrlbistInsertTrafficTest Article
1.3.6.1.4.1.20044.100.6.2.23.1Rowpm400frs04CtrlbistInsertTrafficTestEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlbistInsertTrafficTest table
1.3.6.1.4.1.20044.100.6.2.23.1.1Columnpm400frs04CtrlbistInsertTrafficTestIndexread-onlycurrentIndex definition for the pm400frs04CtrlbistInsertTrafficTest table
1.3.6.1.4.1.20044.100.6.2.23.1.2Columnpm400frs04CtrlbistInsertTrafficTestPortnread-writecurrentBIST Insert Test Traffic :This OID initiates the Built-In Self Test test traffic insertion <Help> This parameter initiates the Built-In Self Test test traffic …
1.3.6.1.4.1.20044.100.6.2.24Tablepm400frs04CtrlbistResetTestTablenot-accessiblecurrentList of pm400frs04CtrlbistResetTest Article
1.3.6.1.4.1.20044.100.6.2.24.1Rowpm400frs04CtrlbistResetTestEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlbistResetTest table
1.3.6.1.4.1.20044.100.6.2.24.1.1Columnpm400frs04CtrlbistResetTestIndexread-onlycurrentIndex definition for the pm400frs04CtrlbistResetTest table
1.3.6.1.4.1.20044.100.6.2.24.1.2Columnpm400frs04CtrlbistResetPortnread-writecurrentBIST Reset :This OID resets the BIST Result alarm to OFF <Help> This parameter resets the BIST Result alarm to OFF
1.3.6.1.4.1.20044.100.6.2.36Tablepm400frs04CtrlbistModeTestTablenot-accessiblecurrentList of pm400frs04CtrlbistModeTest Article
1.3.6.1.4.1.20044.100.6.2.36.1Rowpm400frs04CtrlbistModeTestEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlbistModeTest table
1.3.6.1.4.1.20044.100.6.2.36.1.1Columnpm400frs04CtrlbistModeTestIndexread-onlycurrentIndex definition for the pm400frs04CtrlbistModeTest table
1.3.6.1.4.1.20044.100.6.2.36.1.2Columnpm400frs04CtrlbistModeTestPortnread-writecurrentBIST Mode :This OID enables the Built-In Self Test mode on the client port <Help> This parameter enables the Built-In Self Test mode on the client port
1.3.6.1.4.1.20044.100.6.2.262Tablepm400frs04CtrlclientResetAllCountTablenot-accessiblecurrentList of pm400frs04CtrlclientResetAllCount Article
1.3.6.1.4.1.20044.100.6.2.262.1Rowpm400frs04CtrlclientResetAllCountEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlclientResetAllCount table
1.3.6.1.4.1.20044.100.6.2.262.1.1Columnpm400frs04CtrlclientResetAllCountIndexread-onlycurrentIndex definition for the pm400frs04CtrlclientResetAllCount table
1.3.6.1.4.1.20044.100.6.2.262.1.2Columnpm400frs04CtrlclientResetAllCountsPortnread-writecurrentClient Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl…
1.3.6.1.4.1.20044.100.6.3Nodepm400frs04CtrlLine
1.3.6.1.4.1.20044.100.6.3.64Tablepm400frs04CtrlcommAccessLoopTablenot-accessiblecurrentList of pm400frs04CtrlcommAccessLoop Article
1.3.6.1.4.1.20044.100.6.3.64.1Rowpm400frs04CtrlcommAccessLoopEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlcommAccessLoop table
1.3.6.1.4.1.20044.100.6.3.64.1.1Columnpm400frs04CtrlcommAccessLoopIndexread-onlycurrentIndex definition for the pm400frs04CtrlcommAccessLoop table
1.3.6.1.4.1.20044.100.6.3.64.1.2Columnpm400frs04CtrlcommAccessLoopPortnread-writecurrentLine Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co…
1.3.6.1.4.1.20044.100.6.3.66Tablepm400frs04CtrllineLoopTablenot-accessiblecurrentList of pm400frs04CtrllineLoop Article
1.3.6.1.4.1.20044.100.6.3.66.1Rowpm400frs04CtrllineLoopEntrynot-accessiblecurrentRow definition for the pm400frs04CtrllineLoop table
1.3.6.1.4.1.20044.100.6.3.66.1.1Columnpm400frs04CtrllineLoopIndexread-onlycurrentIndex definition for the pm400frs04CtrllineLoop table
1.3.6.1.4.1.20044.100.6.3.66.1.2Columnpm400frs04CtrllineLoopPortnread-writecurrentLine Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. …
1.3.6.1.4.1.20044.100.6.3.69Tablepm400frs04CtrlfecDisableTablenot-accessiblecurrentList of pm400frs04CtrlfecDisable Article
1.3.6.1.4.1.20044.100.6.3.69.1Rowpm400frs04CtrlfecDisableEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlfecDisable table
1.3.6.1.4.1.20044.100.6.3.69.1.1Columnpm400frs04CtrlfecDisableIndexread-onlycurrentIndex definition for the pm400frs04CtrlfecDisable table
1.3.6.1.4.1.20044.100.6.3.69.1.2Columnpm400frs04CtrlfecDisablePortnread-writecurrentForward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t…
1.3.6.1.4.1.20044.100.6.3.209Tablepm400frs04CtrlmsaLineLoopTablenot-accessiblecurrentList of pm400frs04CtrlmsaLineLoop Article
1.3.6.1.4.1.20044.100.6.3.209.1Rowpm400frs04CtrlmsaLineLoopEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlmsaLineLoop table
1.3.6.1.4.1.20044.100.6.3.209.1.1Columnpm400frs04CtrlmsaLineLoopIndexread-onlycurrentIndex definition for the pm400frs04CtrlmsaLineLoop table
1.3.6.1.4.1.20044.100.6.3.209.1.2Columnpm400frs04CtrlmsaLineLoopPortnread-writecurrentMSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver
1.3.6.1.4.1.20044.100.6.3.210Tablepm400frs04CtrlcoherentLineResyncTablenot-accessiblecurrentList of pm400frs04CtrlcoherentLineResync Article
1.3.6.1.4.1.20044.100.6.3.210.1Rowpm400frs04CtrlcoherentLineResyncEntrynot-accessiblecurrentRow definition for the pm400frs04CtrlcoherentLineResync table
1.3.6.1.4.1.20044.100.6.3.210.1.1Columnpm400frs04CtrlcoherentLineResyncIndexread-onlycurrentIndex definition for the pm400frs04CtrlcoherentLineResync table
1.3.6.1.4.1.20044.100.6.3.210.1.2Columnpm400frs04CtrlcoherentLineResyncPortnread-writecurrentCoherent Line Resync :This parameter forces the resynchronization of the Coherent Line interface. <Help> This maintenance parameter forces the resynchronizatio…
1.3.6.1.4.1.20044.100.6.3.221Tablepm400frs04CtrlforceKeyExchangeTablenot-accessibledeprecatedList of pm400frs04CtrlforceKeyExchange Article
1.3.6.1.4.1.20044.100.6.3.221.1Rowpm400frs04CtrlforceKeyExchangeEntrynot-accessibledeprecatedRow definition for the pm400frs04CtrlforceKeyExchange table
1.3.6.1.4.1.20044.100.6.3.221.1.1Columnpm400frs04CtrlforceKeyExchangeIndexread-onlydeprecatedIndex definition for the pm400frs04CtrlforceKeyExchange table
1.3.6.1.4.1.20044.100.6.3.221.1.2Columnpm400frs04CtrlforceKeyExchangePortnread-writedeprecated:
1.3.6.1.4.1.20044.100.6.3.222Tablepm400frs04CtrldisableEncryptionTablenot-accessibledeprecatedList of pm400frs04CtrldisableEncryption Article
1.3.6.1.4.1.20044.100.6.3.222.1Rowpm400frs04CtrldisableEncryptionEntrynot-accessibledeprecatedRow definition for the pm400frs04CtrldisableEncryption table
1.3.6.1.4.1.20044.100.6.3.222.1.1Columnpm400frs04CtrldisableEncryptionIndexread-onlydeprecatedIndex definition for the pm400frs04CtrldisableEncryption table
1.3.6.1.4.1.20044.100.6.3.222.1.2Columnpm400frs04CtrldisableEncryptionPortnread-writedeprecated:
1.3.6.1.4.1.20044.100.6.3.223Tablepm400frs04CtrlresetMonitoringTablenot-accessibledeprecatedList of pm400frs04CtrlresetMonitoring Article
1.3.6.1.4.1.20044.100.6.3.223.1Rowpm400frs04CtrlresetMonitoringEntrynot-accessibledeprecatedRow definition for the pm400frs04CtrlresetMonitoring table
1.3.6.1.4.1.20044.100.6.3.223.1.1Columnpm400frs04CtrlresetMonitoringIndexread-onlydeprecatedIndex definition for the pm400frs04CtrlresetMonitoring table
1.3.6.1.4.1.20044.100.6.3.223.1.2Columnpm400frs04CtrlresetMonitoringPortnread-writedeprecated:
1.3.6.1.4.1.20044.100.6.3.263Tablepm400frs04CtrllineResetAllCountTablenot-accessiblecurrentList of pm400frs04CtrllineResetAllCount Article
1.3.6.1.4.1.20044.100.6.3.263.1Rowpm400frs04CtrllineResetAllCountEntrynot-accessiblecurrentRow definition for the pm400frs04CtrllineResetAllCount table
1.3.6.1.4.1.20044.100.6.3.263.1.1Columnpm400frs04CtrllineResetAllCountIndexread-onlycurrentIndex definition for the pm400frs04CtrllineResetAllCount table
1.3.6.1.4.1.20044.100.6.3.263.1.2Columnpm400frs04CtrllineResetAllCountsPortnread-writecurrentLine Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p…
1.3.6.1.4.1.20044.100.7Nodepm400frs04ri
1.3.6.1.4.1.20044.100.7.1Nodepm400frs04riTable
1.3.6.1.4.1.20044.100.7.1.1Tablepm400frs04RinvSfpTablenot-accessiblecurrentList of the SFPs on the selected module
1.3.6.1.4.1.20044.100.7.1.1.1Rowpm400frs04RinvSfpEntrynot-accessiblecurrentRow definition for the SFP table
1.3.6.1.4.1.20044.100.7.1.1.1.1Columnpm400frs04RinvSfpIndexread-onlycurrentIndex for SFP table
1.3.6.1.4.1.20044.100.7.1.1.1.2Columnpm400frs04Rinvsfpread-onlycurrentInventory for the SFP: This OID contains the inventory for the SFP
1.3.6.1.4.1.20044.100.7.1.2Tablepm400frs04RinvLineTablenot-accessiblecurrentList of the XFPs on the selected module
1.3.6.1.4.1.20044.100.7.1.2.1Rowpm400frs04RinvLineEntrynot-accessiblecurrentRow definition for the XFP table
1.3.6.1.4.1.20044.100.7.1.2.1.1Columnpm400frs04RinvLineIndexread-onlycurrentIndex for XFP table
1.3.6.1.4.1.20044.100.7.1.2.1.2Columnpm400frs04RinvxfpLineread-onlycurrentInventory for the XFP: This OID contains the inventory for the XFP
1.3.6.1.4.1.20044.100.7.2Scalarpm400frs04RinvReloadInventoryread-writecurrentReload the inventory: This OID triggers an inventory reload.
1.3.6.1.4.1.20044.100.7.3Scalarpm400frs04RinvHwPlatformread-onlycurrentHW platform description: This OID contains the description of the Hardware platform.
1.3.6.1.4.1.20044.100.7.4Scalarpm400frs04RinvModulePlatformread-onlycurrentModule platform description: This OID contains the description of the Module.
1.3.6.1.4.1.20044.100.7.5Scalarpm400frs04RinvSwPlatformread-onlycurrentSW platform description: This OID contains the description of the Software platform.
1.3.6.1.4.1.20044.100.7.6Scalarpm400frs04RinvGwPlatformread-onlycurrentGW platform description: This OID contains the description of the Gateware platform.
1.3.6.1.4.1.20044.100.8Nodepm400frs04download
1.3.6.1.4.1.20044.100.8.1Nodepm400frs04DwlOther
1.3.6.1.4.1.20044.100.8.1.0Nodepm400frs04DwlrestartProcess
1.3.6.1.4.1.20044.100.8.1.0.1Scalarpm400frs04DwlWarmRestartProcessedread-onlycurrentWarm Restart :This OID indicates that the module last restart was a Warm RESTART
1.3.6.1.4.1.20044.100.8.1.0.2Scalarpm400frs04DwlColdRestartProcessedread-onlycurrentCold Restart :This OID indicates that the module last restart was a Cold RESTART
1.3.6.1.4.1.20044.100.8.1.1Nodepm400frs04DwlswBanksUsed
1.3.6.1.4.1.20044.100.8.1.1.1Scalarpm400frs04DwlSwBank1Usedread-onlycurrentSW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby
1.3.6.1.4.1.20044.100.8.1.1.2Scalarpm400frs04DwlSwBank2Usedread-onlycurrentSW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby
1.3.6.1.4.1.20044.100.8.1.1.5Scalarpm400frs04DwlSwBank1Notemptyread-onlycurrentSW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package
1.3.6.1.4.1.20044.100.8.1.1.6Scalarpm400frs04DwlSwBank2Notemptyread-onlycurrentSW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package
1.3.6.1.4.1.20044.100.8.1.2Nodepm400frs04DwlgwBanksUsed
1.3.6.1.4.1.20044.100.8.1.2.1Scalarpm400frs04DwlGwBank1Usedread-onlycurrentGW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby
1.3.6.1.4.1.20044.100.8.1.2.2Scalarpm400frs04DwlGwBank2Usedread-onlycurrentGW bank 2 active :This OID indicates the module is working on GW bank 2
1.3.6.1.4.1.20044.100.8.1.2.3Scalarpm400frs04DwlGwBank3Usedread-onlycurrentGW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby
1.3.6.1.4.1.20044.100.8.1.2.4Scalarpm400frs04DwlGwBank4Usedread-onlycurrentGW bank 4 active :This OID indicates the module is working on GW bank 4
1.3.6.1.4.1.20044.100.8.1.2.5Scalarpm400frs04DwlGwBank1Notemptyread-onlycurrentGW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package
1.3.6.1.4.1.20044.100.8.1.2.6Scalarpm400frs04DwlGwBank2Notemptyread-onlycurrentGW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2
1.3.6.1.4.1.20044.100.8.1.2.7Scalarpm400frs04DwlGwBank3Notemptyread-onlycurrentGW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package
1.3.6.1.4.1.20044.100.8.1.2.8Scalarpm400frs04DwlGwBank4Notemptyread-onlycurrentGW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4
1.3.6.1.4.1.20044.100.8.2Nodepm400frs04DwlClient
1.3.6.1.4.1.20044.100.8.3Nodepm400frs04DwlLine
1.3.6.1.4.1.20044.100.9Nodepm400frs04Config
1.3.6.1.4.1.20044.100.9.1Nodepm400frs04CfgAccessCAisCsf
1.3.6.1.4.1.20044.100.9.1.1Tablepm400frs04CfgClientcaiscsfTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.1.1.1Rowpm400frs04CfgClientcaiscsfEntrynot-accessiblecurrentRow definition for the accessCAisCsf table
1.3.6.1.4.1.20044.100.9.1.1.1.1Columnpm400frs04CfgClientcaiscsfIndexread-onlycurrentIndex definition for the clientcaiscsf table
1.3.6.1.4.1.20044.100.9.1.1.1.3Columnpm400frs04CfgReservePortnread-writecurrentCAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition
1.3.6.1.4.1.20044.100.9.2Nodepm400frs04CfgStartup
1.3.6.1.4.1.20044.100.9.2.1Tablepm400frs04CfgClientStartupTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.2.1.1Rowpm400frs04CfgClientStartupEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.100.9.2.1.1.1Columnpm400frs04CfgClientStartupIndexread-onlycurrentIndex definition for the clientStartup table
1.3.6.1.4.1.20044.100.9.2.1.1.3Columnpm400frs04CfgSystConfPortPortnread-writecurrentDefault Settings on Client Port :This register configures the default initialisation settings on the port.
1.3.6.1.4.1.20044.100.9.2.1.1.4Columnpm400frs04CfgNetConfPortPortnread-writecurrentDefault Settings on Client Port :This register configures the default initialisation settings on the port.
1.3.6.1.4.1.20044.100.9.2.1.1.14Columnpm400frs04CfgOptionsPortPortnread-writecurrentDefault Options on Client Port :This register configures the default options on the port.
1.3.6.1.4.1.20044.100.9.2.2Tablepm400frs04CfgLineStartupTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.2.2.1Rowpm400frs04CfgLineStartupEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.100.9.2.2.1.1Columnpm400frs04CfgLineStartupIndexread-onlycurrentIndex definition for the lineStartup table
1.3.6.1.4.1.20044.100.9.2.2.1.3Columnpm400frs04CfgSystConfLinePortnread-writecurrentDefault Settings on Line :This register configures the default initialisation settings on Line
1.3.6.1.4.1.20044.100.9.2.2.1.14Columnpm400frs04CfgOptionsLinePortnread-writecurrentDefault Options on Line :This register configures the default options on the line
1.3.6.1.4.1.20044.100.9.2.3Tablepm400frs04CfgXfpTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.2.3.1Rowpm400frs04CfgXfpEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.100.9.2.3.1.1Columnpm400frs04CfgXfpIndexread-onlycurrentIndex definition for the xfp table
1.3.6.1.4.1.20044.100.9.2.3.1.3Columnpm400frs04CfgSystConfMsaLinePortnread-writecurrentDefault settings on TRX :This register configures the default initialisation settings on TRX
1.3.6.1.4.1.20044.100.9.2.3.1.6Columnpm400frs04CfgLineInputPowerHighAlarmPortnread-writecurrentDefault settings on alarm threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.7Columnpm400frs04CfgLineInputPowerHighWarningPortnread-writecurrentDefault settings on warning threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.8Columnpm400frs04CfgLineInputPowerLowWarningPortnread-writecurrentDefault settings on warning threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.9Columnpm400frs04CfgLineInputPowerLowAlarmPortnread-writecurrentDefault settings on alarm threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.10Columnpm400frs04CfgLineOutputPowerHighAlarmPortnread-writecurrentDefault settings on alarm threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.11Columnpm400frs04CfgLineOutputPowerHighWarningPortnread-writecurrentDefault settings on warning threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.12Columnpm400frs04CfgLineOutputPowerLowWarningPortnread-writecurrentDefault settings on warning threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.13Columnpm400frs04CfgLineOutputPowerLowAlarmPortnread-writecurrentDefault settings on alarm threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.2.3.1.14Columnpm400frs04CfgLineLossOfSignalPortnread-writecurrentDefault settings on Los threshold :This register configures the default initialisation settings on a threshold
1.3.6.1.4.1.20044.100.9.3Nodepm400frs04CfgLabels
1.3.6.1.4.1.20044.100.9.3.1Tablepm400frs04CfgLabelclientTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.3.1.1Rowpm400frs04CfgLabelclientEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.100.9.3.1.1.1Columnpm400frs04CfgLabelclientIndexread-onlycurrentIndex definition for the labelclient table
1.3.6.1.4.1.20044.100.9.3.1.1.3Columnpm400frs04CfgLabelclientPortnread-writecurrentDefault settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports.
1.3.6.1.4.1.20044.100.9.3.2Tablepm400frs04CfgLabellineTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.3.2.1Rowpm400frs04CfgLabellineEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.100.9.3.2.1.1Columnpm400frs04CfgLabellineIndexread-onlycurrentIndex definition for the labelline table
1.3.6.1.4.1.20044.100.9.3.2.1.3Columnpm400frs04CfgLabellinePortnread-writecurrentDefault settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines.
1.3.6.1.4.1.20044.100.9.4Nodepm400frs04CfgStartuptlh
1.3.6.1.4.1.20044.100.9.4.1Tablepm400frs04CfgOtxtlhTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.4.1.1Rowpm400frs04CfgOtxtlhEntrynot-accessiblecurrentRow definition for the startuptlh table
1.3.6.1.4.1.20044.100.9.4.1.1.1Columnpm400frs04CfgOtxtlhIndexread-onlycurrentIndex definition for the otxtlh table
1.3.6.1.4.1.20044.100.9.4.1.1.6Columnpm400frs04CfgLinePwrLaserPortnread-writecurrentDefaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm)
1.3.6.1.4.1.20044.100.9.4.1.1.7Columnpm400frs04CfgLineFCurrentPortnread-writecurrentDefault Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver
1.3.6.1.4.1.20044.100.9.4.1.1.8Columnpm400frs04CfgLineGridCurrentPortnread-writecurrentDefault Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver
1.3.6.1.4.1.20044.100.9.4.1.1.9Columnpm400frs04CfgFPortnread-writecurrentDefault Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver
1.3.6.1.4.1.20044.100.9.4.1.1.10Columnpm400frs04CfgTxLineFCurrentPortnread-writecurrentDefault Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver
1.3.6.1.4.1.20044.100.9.4.1.1.11Columnpm400frs04CfgLineSpectralBandwidthPortnread-onlycurrentDefault Line Spectral Bandwidth :This OID displays the line signal spectral bandwidth (Ghz)
1.3.6.1.4.1.20044.100.9.5Nodepm400frs04CfgOther
1.3.6.1.4.1.20044.100.9.5.1Nodepm400frs04tablemoduleOther
1.3.6.1.4.1.20044.100.9.5.1.2Scalarpm400frs04CfgclientModeread-writecurrentDefault settings on Module :This register selects the configuration mode of the module
1.3.6.1.4.1.20044.100.9.5.1.5Scalarpm400frs04CfgmoduleModeread-writecurrentDefault settings on Module :This register selects the configuration mode of the module <Event> ObjectClearHistoPerf
1.3.6.1.4.1.20044.100.9.6Nodepm400frs04CfgStartuptablefive
1.3.6.1.4.1.20044.100.9.6.1Tablepm400frs04CfgOtxtlhcapabilitiesTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.100.9.6.1.1Rowpm400frs04CfgOtxtlhcapabilitiesEntrynot-accessiblecurrentRow definition for the startuptablefive table
1.3.6.1.4.1.20044.100.9.6.1.1.1Columnpm400frs04CfgOtxtlhcapabilitiesIndexread-onlycurrentIndex definition for the otxtlhcapabilities table
1.3.6.1.4.1.20044.100.9.6.1.1.3Columnpm400frs04CfgComponentTypePortnread-onlycurrentComponent parameters :This OID defines the component parameters
1.3.6.1.4.1.20044.100.9.6.1.1.4Columnpm400frs04CfgMiscellaneousPortnread-onlycurrentMiscellaneous default settings :This OID defines the miscellaneous parameters
1.3.6.1.4.1.20044.100.9.6.1.1.5Columnpm400frs04CfgFirstChannelPortnread-onlycurrentNumber of the first channel of the component :This OID defines the first channel number of the PM
1.3.6.1.4.1.20044.100.9.6.1.1.6Columnpm400frs04CfgLastChannelPortnread-onlycurrentNumber of the last channel of the component :This OID defines the last channel number of the PM
1.3.6.1.4.1.20044.100.9.6.1.1.7Columnpm400frs04CfgGridPortnread-onlycurrentGrid value of the component :This OID defines the grid of the PM
1.3.6.1.4.1.20044.100.9.257Scalarpm400frs04CfgWriteConfigurationread-writecurrentWrite configuration to module:This OID writes the complete configuration to the module
1.3.6.1.4.1.20044.100.10Nodepm400frs04traps
1.3.6.1.4.1.20044.100.10.2Scalarpm400frs04trapPortNumberread-onlycurrentLast port which generates a trap
1.3.6.1.4.1.20044.100.10.3Scalarpm400frs04trapLineNumberread-onlycurrentLast Line which generates a trap
1.3.6.1.4.1.20044.100.10.4Scalarpm400frs04trapBoardNumberread-onlycurrentLast module which generates a trap
1.3.6.1.4.1.20044.100.10.30Notificationpm400frs04LineTrapNotUrgentGoesOncurrentNot urgent Line default is activated
1.3.6.1.4.1.20044.100.10.31Notificationpm400frs04LineTrapNotUrgentGoesOffcurrentNot urgent Line default disappeared
1.3.6.1.4.1.20044.100.10.32Notificationpm400frs04LineTrapUrgentGoesOncurrentUrgent Line default is activated
1.3.6.1.4.1.20044.100.10.33Notificationpm400frs04LineTrapUrgentGoesOffcurrentUrgent Line default disappeared
1.3.6.1.4.1.20044.100.10.34Notificationpm400frs04LineTrapCritGoesOncurrentCritical Line default is activated
1.3.6.1.4.1.20044.100.10.35Notificationpm400frs04LineTrapCritGoesOffcurrentCritical Line default disappeared
1.3.6.1.4.1.20044.100.10.40Notificationpm400frs04ClientTrapNotUrgentGoesOncurrentNot urgent client default is activated
1.3.6.1.4.1.20044.100.10.41Notificationpm400frs04ClientTrapNotUrgentGoesOffcurrentNot urgent client default disappeared
1.3.6.1.4.1.20044.100.10.42Notificationpm400frs04ClientTrapUrgentGoesOncurrentUrgent client default is activated
1.3.6.1.4.1.20044.100.10.43Notificationpm400frs04ClientTrapUrgentGoesOffcurrentUrgent client default disappeared
1.3.6.1.4.1.20044.100.10.44Notificationpm400frs04ClientTrapCritGoesOncurrentCritical client default is activated
1.3.6.1.4.1.20044.100.10.45Notificationpm400frs04ClientTrapCritGoesOffcurrentCritical client default disappeared
1.3.6.1.4.1.20044.100.10.50Notificationpm400frs04PowerTrapUrgentGoesOncurrentUrgent power supply default is activated
1.3.6.1.4.1.20044.100.10.51Notificationpm400frs04PowerTrapUrgentGoesOffcurrentUrgent power supply default disappeared
1.3.6.1.4.1.20044.100.11Nodepm400frs04Monitoring
1.3.6.1.4.1.20044.100.11.1Nodepm400frs04MonOther
1.3.6.1.4.1.20044.100.11.1.3Nodepm400frs04MonRmon
1.3.6.1.4.1.20044.100.11.2Nodepm400frs04MonClient
1.3.6.1.4.1.20044.100.11.2.4Nodepm400frs04MonClientRmonCounter
1.3.6.1.4.1.20044.100.11.2.4.16Tablepm400frs04MonupRmonBytesCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonBytesCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.16.1Rowpm400frs04MonupRmonBytesCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonBytesCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.16.1.1Columnpm400frs04MonupRmonBytesCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonBytesCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.16.1.2Columnpm400frs04MonupRmonBytesCounterClientInputValuePortnread-onlycurrentClient Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th…
1.3.6.1.4.1.20044.100.11.2.4.16.1.3Columnpm400frs04MonupRmonBytesCounterClientInputErrorPortnread-onlycurrentBytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.16.1.4Columnpm400frs04MonupRmonBytesCounterClientInputOverloadPortnread-onlycurrentBytes Counter Overload :This OID when set indicates a Bytes counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.48Tablepm400frs04MonupRmonCrcErrorsCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonCrcErrorsCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.48.1Rowpm400frs04MonupRmonCrcErrorsCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonCrcErrorsCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.48.1.1Columnpm400frs04MonupRmonCrcErrorsCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonCrcErrorsCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.48.1.2Columnpm400frs04MonupRmonCrcErrorsCounterClientInputValuePortnread-onlycurrentClient Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei…
1.3.6.1.4.1.20044.100.11.2.4.48.1.3Columnpm400frs04MonupRmonCrcErrorsCounterClientInputErrorPortnread-onlycurrentCRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.48.1.4Columnpm400frs04MonupRmonCrcErrorsCounterClientInputOverloadPortnread-onlycurrentCRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.80Tablepm400frs04MonupRmonPacketsCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonPacketsCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.80.1Rowpm400frs04MonupRmonPacketsCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonPacketsCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.80.1.1Columnpm400frs04MonupRmonPacketsCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonPacketsCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.80.1.2Columnpm400frs04MonupRmonPacketsCounterClientInputValuePortnread-onlycurrentClient Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t…
1.3.6.1.4.1.20044.100.11.2.4.80.1.3Columnpm400frs04MonupRmonPacketsCounterClientInputErrorPortnread-onlycurrentPackets Counter Error :This OID when set indicates the Packets counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.80.1.4Columnpm400frs04MonupRmonPacketsCounterClientInputOverloadPortnread-onlycurrentPackets Counter Overload :This OID when set indicates a Packets counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.112Tablepm400frs04MonupRmonBroadcastCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonBroadcastCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.112.1Rowpm400frs04MonupRmonBroadcastCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonBroadcastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.112.1.1Columnpm400frs04MonupRmonBroadcastCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonBroadcastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.112.1.2Columnpm400frs04MonupRmonBroadcastCounterClientInputValuePortnread-onlycurrentClient Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B…
1.3.6.1.4.1.20044.100.11.2.4.112.1.3Columnpm400frs04MonupRmonBroadcastCounterClientInputErrorPortnread-onlycurrentBroadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.112.1.4Columnpm400frs04MonupRmonBroadcastCounterClientInputOverloadPortnread-onlycurrentBroadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.144Tablepm400frs04MonupRmonMulticastCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonMulticastCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.144.1Rowpm400frs04MonupRmonMulticastCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonMulticastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.144.1.1Columnpm400frs04MonupRmonMulticastCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonMulticastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.144.1.2Columnpm400frs04MonupRmonMulticastCounterClientInputValuePortnread-onlycurrentClient Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M…
1.3.6.1.4.1.20044.100.11.2.4.144.1.3Columnpm400frs04MonupRmonMulticastCounterClientInputErrorPortnread-onlycurrentMulticast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.144.1.4Columnpm400frs04MonupRmonMulticastCounterClientInputOverloadPortnread-onlycurrentMulticast Counter Overload :This OID when set indicates a Multicast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.176Tablepm400frs04MonupRmonPauseFrameCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonPauseFrameCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.176.1Rowpm400frs04MonupRmonPauseFrameCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonPauseFrameCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.176.1.1Columnpm400frs04MonupRmonPauseFrameCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonPauseFrameCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.176.1.2Columnpm400frs04MonupRmonPauseFrameCounterClientInputValuePortnread-onlycurrentClient Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame…
1.3.6.1.4.1.20044.100.11.2.4.176.1.3Columnpm400frs04MonupRmonPauseFrameCounterClientInputErrorPortnread-onlycurrentPause Counter Error :This OID when set indicates the Pause counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.176.1.4Columnpm400frs04MonupRmonPauseFrameCounterClientInputOverloadPortnread-onlycurrentPause Counter Overload :This OID when set indicates a Pause counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.304Tablepm400frs04MonupRmonUnicastCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonUnicastCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.304.1Rowpm400frs04MonupRmonUnicastCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonUnicastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.304.1.1Columnpm400frs04MonupRmonUnicastCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonUnicastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.304.1.2Columnpm400frs04MonupRmonUnicastCounterClientInputValuePortnread-onlycurrentClient Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica…
1.3.6.1.4.1.20044.100.11.2.4.304.1.3Columnpm400frs04MonupRmonUnicastCounterClientInputErrorPortnread-onlycurrentUnicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.304.1.4Columnpm400frs04MonupRmonUnicastCounterClientInputOverloadPortnread-onlycurrentUnicast Counter Overload :This OID when set indicates a Unicast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.336Tablepm400frs04MonupRmonNonunicastCounterClientInputTablenot-accessiblecurrentList of pm400frs04MonupRmonNonunicastCounterClientInput Article
1.3.6.1.4.1.20044.100.11.2.4.336.1Rowpm400frs04MonupRmonNonunicastCounterClientInputEntrynot-accessiblecurrentRow definition for the pm400frs04MonupRmonNonunicastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.336.1.1Columnpm400frs04MonupRmonNonunicastCounterClientInputIndexread-onlycurrentIndex definition for the pm400frs04MonupRmonNonunicastCounterClientInput table
1.3.6.1.4.1.20044.100.11.2.4.336.1.2Columnpm400frs04MonupRmonNonunicastCounterClientInputValuePortnread-onlycurrentClient Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number …
1.3.6.1.4.1.20044.100.11.2.4.336.1.3Columnpm400frs04MonupRmonNonunicastCounterClientInputErrorPortnread-onlycurrentNon Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.336.1.4Columnpm400frs04MonupRmonNonunicastCounterClientInputOverloadPortnread-onlycurrentNon Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.400Tablepm400frs04MondownRmonBytesCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonBytesCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.400.1Rowpm400frs04MondownRmonBytesCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonBytesCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.400.1.1Columnpm400frs04MondownRmonBytesCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonBytesCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.400.1.2Columnpm400frs04MondownRmonBytesCounterClientOutputValuePortnread-onlycurrentClient Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte…
1.3.6.1.4.1.20044.100.11.2.4.400.1.3Columnpm400frs04MondownRmonBytesCounterClientOutputErrorPortnread-onlycurrentBytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.400.1.4Columnpm400frs04MondownRmonBytesCounterClientOutputOverloadPortnread-onlycurrentBytes Counter Overload :This OID when set indicates a Bytes counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.432Tablepm400frs04MondownRmonCrcErrorsCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonCrcErrorsCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.432.1Rowpm400frs04MondownRmonCrcErrorsCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonCrcErrorsCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.432.1.1Columnpm400frs04MondownRmonCrcErrorsCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonCrcErrorsCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.432.1.2Columnpm400frs04MondownRmonCrcErrorsCounterClientOutputValuePortnread-onlycurrentClient Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E…
1.3.6.1.4.1.20044.100.11.2.4.432.1.3Columnpm400frs04MondownRmonCrcErrorsCounterClientOutputErrorPortnread-onlycurrentCRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.432.1.4Columnpm400frs04MondownRmonCrcErrorsCounterClientOutputOverloadPortnread-onlycurrentCRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.464Tablepm400frs04MondownRmonPacketsCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonPacketsCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.464.1Rowpm400frs04MondownRmonPacketsCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonPacketsCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.464.1.1Columnpm400frs04MondownRmonPacketsCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonPacketsCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.464.1.2Columnpm400frs04MondownRmonPacketsCounterClientOutputValuePortnread-onlycurrentClient Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt…
1.3.6.1.4.1.20044.100.11.2.4.464.1.3Columnpm400frs04MondownRmonPacketsCounterClientOutputErrorPortnread-onlycurrentPackets Counter Error :This OID when set indicates the Packets counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.464.1.4Columnpm400frs04MondownRmonPacketsCounterClientOutputOverloadPortnread-onlycurrentPackets Counter Overload :This OID when set indicates a Packets counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.496Tablepm400frs04MondownRmonBroadcastCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonBroadcastCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.496.1Rowpm400frs04MondownRmonBroadcastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonBroadcastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.496.1.1Columnpm400frs04MondownRmonBroadcastCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonBroadcastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.496.1.2Columnpm400frs04MondownRmonBroadcastCounterClientOutputValuePortnread-onlycurrentClient Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number …
1.3.6.1.4.1.20044.100.11.2.4.496.1.3Columnpm400frs04MondownRmonBroadcastCounterClientOutputErrorPortnread-onlycurrentBroadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.496.1.4Columnpm400frs04MondownRmonBroadcastCounterClientOutputOverloadPortnread-onlycurrentBroadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.528Tablepm400frs04MondownRmonMulticastCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonMulticastCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.528.1Rowpm400frs04MondownRmonMulticastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonMulticastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.528.1.1Columnpm400frs04MondownRmonMulticastCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonMulticastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.528.1.2Columnpm400frs04MondownRmonMulticastCounterClientOutputValuePortnread-onlycurrentClient Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number …
1.3.6.1.4.1.20044.100.11.2.4.528.1.3Columnpm400frs04MondownRmonMulticastCounterClientOutputErrorPortnread-onlycurrentMulticast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.528.1.4Columnpm400frs04MondownRmonMulticastCounterClientOutputOverloadPortnread-onlycurrentMulticast Counter Overload :This OID when set indicates a Multicast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.560Tablepm400frs04MondownRmonPauseFrameCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonPauseFrameCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.560.1Rowpm400frs04MondownRmonPauseFrameCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonPauseFrameCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.560.1.1Columnpm400frs04MondownRmonPauseFrameCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonPauseFrameCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.560.1.2Columnpm400frs04MondownRmonPauseFrameCounterClientOutputValuePortnread-onlycurrentClient Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f…
1.3.6.1.4.1.20044.100.11.2.4.560.1.3Columnpm400frs04MondownRmonPauseFrameCounterClientOutputErrorPortnread-onlycurrentPause Counter Error :This OID when set indicates the Pause counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.560.1.4Columnpm400frs04MondownRmonPauseFrameCounterClientOutputOverloadPortnread-onlycurrentPause Counter Overload :This OID when set indicates a Pause counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.688Tablepm400frs04MondownRmonUnicastCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonUnicastCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.688.1Rowpm400frs04MondownRmonUnicastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonUnicastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.688.1.1Columnpm400frs04MondownRmonUnicastCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonUnicastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.688.1.2Columnpm400frs04MondownRmonUnicastCounterClientOutputValuePortnread-onlycurrentClient Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U…
1.3.6.1.4.1.20044.100.11.2.4.688.1.3Columnpm400frs04MondownRmonUnicastCounterClientOutputErrorPortnread-onlycurrentUnicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.688.1.4Columnpm400frs04MondownRmonUnicastCounterClientOutputOverloadPortnread-onlycurrentUnicast Counter Overload :This OID when set indicates a Unicast counter overload on client port
1.3.6.1.4.1.20044.100.11.2.4.720Tablepm400frs04MondownRmonNonunicastCounterClientOutputTablenot-accessiblecurrentList of pm400frs04MondownRmonNonunicastCounterClientOutput Article
1.3.6.1.4.1.20044.100.11.2.4.720.1Rowpm400frs04MondownRmonNonunicastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pm400frs04MondownRmonNonunicastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.720.1.1Columnpm400frs04MondownRmonNonunicastCounterClientOutputIndexread-onlycurrentIndex definition for the pm400frs04MondownRmonNonunicastCounterClientOutput table
1.3.6.1.4.1.20044.100.11.2.4.720.1.2Columnpm400frs04MondownRmonNonunicastCounterClientOutputValuePortnread-onlycurrentClient Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num…
1.3.6.1.4.1.20044.100.11.2.4.720.1.3Columnpm400frs04MondownRmonNonunicastCounterClientOutputErrorPortnread-onlycurrentNon Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.100.11.2.4.720.1.4Columnpm400frs04MondownRmonNonunicastCounterClientOutputOverloadPortnread-onlycurrentNon Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port
1.3.6.1.4.1.20044.100.11.5Nodepm400frs04MonPerfOther
1.3.6.1.4.1.20044.100.11.5.1Nodepm400frs04MonPerfSync
1.3.6.1.4.1.20044.100.11.5.1.257Scalarpm400frs04PerfEnableread-writecurrentPerf. Mon. Enable :This OID enables the Performance Monitoring application
1.3.6.1.4.1.20044.100.11.5.1.259Scalarpm400frs04Perf15minSyncread-writecurrentPerf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command
1.3.6.1.4.1.20044.100.11.5.1.260Scalarpm400frs04Perf24hSyncread-writecurrentPerf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command
1.3.6.1.4.1.20044.100.11.5.2Nodepm400frs04MonPerfTimeStamp
1.3.6.1.4.1.20044.100.11.5.2.1Scalarpm400frs04Perf15MinShortread-writecurrent15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds
1.3.6.1.4.1.20044.100.11.5.2.2Scalarpm400frs04Perf15MinLongread-writecurrent15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds
1.3.6.1.4.1.20044.100.11.5.2.5Scalarpm400frs04Perf24HoursShortread-writecurrent24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds
1.3.6.1.4.1.20044.100.11.5.2.6Scalarpm400frs04Perf24HoursLongread-writecurrent24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds
1.3.6.1.4.1.20044.100.11.5.2.7Scalarpm400frs04PerfCurrent15MinElapsedTimeread-writecurrentCurrent 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period
1.3.6.1.4.1.20044.100.11.5.2.8Scalarpm400frs04PerfCurrent24HoursElapsedTimeread-writecurrentCurrent 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period
1.3.6.1.4.1.20044.100.11.6Nodepm400frs04MonPerfClient
1.3.6.1.4.1.20044.100.11.6.16Tablepm400frs04PerfTelecomInputClientCurrent15StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomInputClientCurrent15Stat Article
1.3.6.1.4.1.20044.100.11.6.16.1Rowpm400frs04PerfTelecomInputClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomInputClientCurrent15Stat table
1.3.6.1.4.1.20044.100.11.6.16.1.1Columnpm400frs04PerfTelecomInputClientCurrent15StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomInputClientCurrent15Stat table
1.3.6.1.4.1.20044.100.11.6.16.1.2Columnpm400frs04PerfTelecomInputClientCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.16.1.3Columnpm400frs04PerfTelecomInputClientCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.16.1.4Columnpm400frs04PerfTelecomInputClientCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.16.1.5Columnpm400frs04PerfTelecomInputClientCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.16.1.6Columnpm400frs04PerfTelecomInputClientCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.16.1.7Columnpm400frs04PerfTelecomInputClientCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.16.1.8Columnpm400frs04PerfTelecomInputClientCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.16.1.9Columnpm400frs04PerfTelecomInputClientCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.16.1.10Columnpm400frs04PerfTelecomInputClientCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.16.1.11Columnpm400frs04PerfTelecomInputClientCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.48Tablepm400frs04PerfTelecomInputClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomInputClientPast15StatHistory Article
1.3.6.1.4.1.20044.100.11.6.48.1Rowpm400frs04PerfTelecomInputClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomInputClientPast15StatHistory table
1.3.6.1.4.1.20044.100.11.6.48.1.1Columnpm400frs04PerfTelecomInputClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomInputClientPast15StatHistory table
1.3.6.1.4.1.20044.100.11.6.48.1.2Columnpm400frs04PerfTelecomInputClientPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.48.1.3Columnpm400frs04PerfTelecomInputClientPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.48.1.4Columnpm400frs04PerfTelecomInputClientPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.48.1.5Columnpm400frs04PerfTelecomInputClientPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.48.1.6Columnpm400frs04PerfTelecomInputClientPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.48.1.7Columnpm400frs04PerfTelecomInputClientPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.48.1.8Columnpm400frs04PerfTelecomInputClientPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.48.1.9Columnpm400frs04PerfTelecomInputClientPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.48.1.10Columnpm400frs04PerfTelecomInputClientPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.48.1.11Columnpm400frs04PerfTelecomInputClientPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.80Tablepm400frs04PerfTelecomInputClientCurrent24StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomInputClientCurrent24Stat Article
1.3.6.1.4.1.20044.100.11.6.80.1Rowpm400frs04PerfTelecomInputClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomInputClientCurrent24Stat table
1.3.6.1.4.1.20044.100.11.6.80.1.1Columnpm400frs04PerfTelecomInputClientCurrent24StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomInputClientCurrent24Stat table
1.3.6.1.4.1.20044.100.11.6.80.1.2Columnpm400frs04PerfTelecomInputClientCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.80.1.3Columnpm400frs04PerfTelecomInputClientCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.80.1.4Columnpm400frs04PerfTelecomInputClientCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.80.1.5Columnpm400frs04PerfTelecomInputClientCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.80.1.6Columnpm400frs04PerfTelecomInputClientCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.80.1.7Columnpm400frs04PerfTelecomInputClientCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.80.1.8Columnpm400frs04PerfTelecomInputClientCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.80.1.9Columnpm400frs04PerfTelecomInputClientCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.80.1.10Columnpm400frs04PerfTelecomInputClientCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.80.1.11Columnpm400frs04PerfTelecomInputClientCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.112Tablepm400frs04PerfTelecomInputClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomInputClientPast24StatHistory Article
1.3.6.1.4.1.20044.100.11.6.112.1Rowpm400frs04PerfTelecomInputClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomInputClientPast24StatHistory table
1.3.6.1.4.1.20044.100.11.6.112.1.1Columnpm400frs04PerfTelecomInputClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomInputClientPast24StatHistory table
1.3.6.1.4.1.20044.100.11.6.112.1.2Columnpm400frs04PerfTelecomInputClientPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.112.1.3Columnpm400frs04PerfTelecomInputClientPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.112.1.4Columnpm400frs04PerfTelecomInputClientPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.112.1.5Columnpm400frs04PerfTelecomInputClientPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.112.1.6Columnpm400frs04PerfTelecomInputClientPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.112.1.7Columnpm400frs04PerfTelecomInputClientPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.112.1.8Columnpm400frs04PerfTelecomInputClientPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.112.1.9Columnpm400frs04PerfTelecomInputClientPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.112.1.10Columnpm400frs04PerfTelecomInputClientPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.112.1.11Columnpm400frs04PerfTelecomInputClientPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.144Tablepm400frs04PerfTelecomOutputClientCurrent15StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomOutputClientCurrent15Stat Article
1.3.6.1.4.1.20044.100.11.6.144.1Rowpm400frs04PerfTelecomOutputClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomOutputClientCurrent15Stat table
1.3.6.1.4.1.20044.100.11.6.144.1.1Columnpm400frs04PerfTelecomOutputClientCurrent15StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomOutputClientCurrent15Stat table
1.3.6.1.4.1.20044.100.11.6.144.1.2Columnpm400frs04PerfTelecomOutputClientCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.144.1.3Columnpm400frs04PerfTelecomOutputClientCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.144.1.4Columnpm400frs04PerfTelecomOutputClientCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.144.1.5Columnpm400frs04PerfTelecomOutputClientCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.144.1.6Columnpm400frs04PerfTelecomOutputClientCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.144.1.7Columnpm400frs04PerfTelecomOutputClientCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.144.1.8Columnpm400frs04PerfTelecomOutputClientCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.144.1.9Columnpm400frs04PerfTelecomOutputClientCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.144.1.10Columnpm400frs04PerfTelecomOutputClientCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.144.1.11Columnpm400frs04PerfTelecomOutputClientCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.176Tablepm400frs04PerfTelecomOutputClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomOutputClientPast15StatHistory Article
1.3.6.1.4.1.20044.100.11.6.176.1Rowpm400frs04PerfTelecomOutputClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomOutputClientPast15StatHistory table
1.3.6.1.4.1.20044.100.11.6.176.1.1Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomOutputClientPast15StatHistory table
1.3.6.1.4.1.20044.100.11.6.176.1.2Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.176.1.3Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.176.1.4Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.176.1.5Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.176.1.6Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.176.1.7Columnpm400frs04PerfTelecomOutputClientPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.176.1.8Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.176.1.9Columnpm400frs04PerfTelecomOutputClientPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.176.1.10Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.176.1.11Columnpm400frs04PerfTelecomOutputClientPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.208Tablepm400frs04PerfTelecomOutputClientCurrent24StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomOutputClientCurrent24Stat Article
1.3.6.1.4.1.20044.100.11.6.208.1Rowpm400frs04PerfTelecomOutputClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomOutputClientCurrent24Stat table
1.3.6.1.4.1.20044.100.11.6.208.1.1Columnpm400frs04PerfTelecomOutputClientCurrent24StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomOutputClientCurrent24Stat table
1.3.6.1.4.1.20044.100.11.6.208.1.2Columnpm400frs04PerfTelecomOutputClientCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.208.1.3Columnpm400frs04PerfTelecomOutputClientCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.208.1.4Columnpm400frs04PerfTelecomOutputClientCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.208.1.5Columnpm400frs04PerfTelecomOutputClientCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.208.1.6Columnpm400frs04PerfTelecomOutputClientCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.208.1.7Columnpm400frs04PerfTelecomOutputClientCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.208.1.8Columnpm400frs04PerfTelecomOutputClientCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.208.1.9Columnpm400frs04PerfTelecomOutputClientCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.208.1.10Columnpm400frs04PerfTelecomOutputClientCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.208.1.11Columnpm400frs04PerfTelecomOutputClientCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.240Tablepm400frs04PerfTelecomOutputClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomOutputClientPast24StatHistory Article
1.3.6.1.4.1.20044.100.11.6.240.1Rowpm400frs04PerfTelecomOutputClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomOutputClientPast24StatHistory table
1.3.6.1.4.1.20044.100.11.6.240.1.1Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomOutputClientPast24StatHistory table
1.3.6.1.4.1.20044.100.11.6.240.1.2Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.6.240.1.3Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.6.240.1.4Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.240.1.5Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.240.1.6Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.240.1.7Columnpm400frs04PerfTelecomOutputClientPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.6.240.1.8Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.240.1.9Columnpm400frs04PerfTelecomOutputClientPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.6.240.1.10Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.6.240.1.11Columnpm400frs04PerfTelecomOutputClientPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.6.848Tablepm400frs04PerfDatacomClientCurrent15StatTablenot-accessiblecurrentList of pm400frs04PerfDatacomClientCurrent15Stat Article
1.3.6.1.4.1.20044.100.11.6.848.1Rowpm400frs04PerfDatacomClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfDatacomClientCurrent15Stat table
1.3.6.1.4.1.20044.100.11.6.848.1.1Columnpm400frs04PerfDatacomClientCurrent15StatIndexread-onlycurrentIndex definition for the pm400frs04PerfDatacomClientCurrent15Stat table
1.3.6.1.4.1.20044.100.11.6.848.1.4Columnpm400frs04perfdatacomclientCurrent15StatInCrcCountInvPortnread-onlycurrentClient Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.848.1.5Columnpm400frs04perfdatacomclientCurrent15StatInCrcCountPortnread-onlycurrentClient Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value
1.3.6.1.4.1.20044.100.11.6.848.1.6Columnpm400frs04perfdatacomclientCurrent15StatInPacketCountInvPortnread-onlycurrentClient Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid
1.3.6.1.4.1.20044.100.11.6.848.1.7Columnpm400frs04perfdatacomclientCurrent15StatInPacketCountPortnread-onlycurrentClient Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value
1.3.6.1.4.1.20044.100.11.6.848.1.28Columnpm400frs04perfdatacomclientCurrent15StatOutCrcCountInvPortnread-onlycurrentClient Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.848.1.29Columnpm400frs04perfdatacomclientCurrent15StatOutCrcCountPortnread-onlycurrentClient Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value
1.3.6.1.4.1.20044.100.11.6.848.1.30Columnpm400frs04perfdatacomclientCurrent15StatOutPacketCountInvPortnread-onlycurrentClient Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid
1.3.6.1.4.1.20044.100.11.6.848.1.31Columnpm400frs04perfdatacomclientCurrent15StatOutPacketCountPortnread-onlycurrentClient Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value
1.3.6.1.4.1.20044.100.11.6.880Tablepm400frs04PerfDatacomClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfDatacomClientPast15StatHistory Article
1.3.6.1.4.1.20044.100.11.6.880.1Rowpm400frs04PerfDatacomClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfDatacomClientPast15StatHistory table
1.3.6.1.4.1.20044.100.11.6.880.1.1Columnpm400frs04PerfDatacomClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfDatacomClientPast15StatHistory table
1.3.6.1.4.1.20044.100.11.6.880.1.4Columnpm400frs04perfdatacomclientPast15StatInCrcCountInvPort1read-onlycurrentClient Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.880.1.5Columnpm400frs04perfdatacomclientPast15StatInCrcCountPort1read-onlycurrentClient Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value
1.3.6.1.4.1.20044.100.11.6.880.1.6Columnpm400frs04perfdatacomclientPast15StatInPacketCountInvPort1read-onlycurrentClient Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid
1.3.6.1.4.1.20044.100.11.6.880.1.7Columnpm400frs04perfdatacomclientPast15StatInPacketCountPort1read-onlycurrentClient Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value
1.3.6.1.4.1.20044.100.11.6.880.1.28Columnpm400frs04perfdatacomclientPast15StatOutCrcCountInvPort1read-onlycurrentClient Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.880.1.29Columnpm400frs04perfdatacomclientPast15StatOutCrcCountPort1read-onlycurrentClient Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value
1.3.6.1.4.1.20044.100.11.6.880.1.30Columnpm400frs04perfdatacomclientPast15StatOutPacketCountInvPort1read-onlycurrentClient Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid
1.3.6.1.4.1.20044.100.11.6.880.1.31Columnpm400frs04perfdatacomclientPast15StatOutPacketCountPort1read-onlycurrentClient Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value
1.3.6.1.4.1.20044.100.11.6.912Tablepm400frs04PerfDatacomClientCurrent24StatTablenot-accessiblecurrentList of pm400frs04PerfDatacomClientCurrent24Stat Article
1.3.6.1.4.1.20044.100.11.6.912.1Rowpm400frs04PerfDatacomClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfDatacomClientCurrent24Stat table
1.3.6.1.4.1.20044.100.11.6.912.1.1Columnpm400frs04PerfDatacomClientCurrent24StatIndexread-onlycurrentIndex definition for the pm400frs04PerfDatacomClientCurrent24Stat table
1.3.6.1.4.1.20044.100.11.6.912.1.4Columnpm400frs04perfdatacomclientCurrent24StatInCrcCountInvPortnread-onlycurrentClient Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.912.1.5Columnpm400frs04perfdatacomclientCurrent24StatInCrcCountPortnread-onlycurrentClient Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value
1.3.6.1.4.1.20044.100.11.6.912.1.6Columnpm400frs04perfdatacomclientCurrent24StatInPacketCountInvPortnread-onlycurrentClient Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid
1.3.6.1.4.1.20044.100.11.6.912.1.7Columnpm400frs04perfdatacomclientCurrent24StatInPacketCountPortnread-onlycurrentClient Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value
1.3.6.1.4.1.20044.100.11.6.912.1.28Columnpm400frs04perfdatacomclientCurrent24StatOutCrcCountInvPortnread-onlycurrentClient Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.912.1.29Columnpm400frs04perfdatacomclientCurrent24StatOutCrcCountPortnread-onlycurrentClient Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value
1.3.6.1.4.1.20044.100.11.6.912.1.30Columnpm400frs04perfdatacomclientCurrent24StatOutPacketCountInvPortnread-onlycurrentClient Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid
1.3.6.1.4.1.20044.100.11.6.912.1.31Columnpm400frs04perfdatacomclientCurrent24StatOutPacketCountPortnread-onlycurrentClient Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value
1.3.6.1.4.1.20044.100.11.6.944Tablepm400frs04PerfDatacomClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfDatacomClientPast24StatHistory Article
1.3.6.1.4.1.20044.100.11.6.944.1Rowpm400frs04PerfDatacomClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfDatacomClientPast24StatHistory table
1.3.6.1.4.1.20044.100.11.6.944.1.1Columnpm400frs04PerfDatacomClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfDatacomClientPast24StatHistory table
1.3.6.1.4.1.20044.100.11.6.944.1.4Columnpm400frs04perfdatacomclientPast24StatInCrcCountInvPort1read-onlycurrentClient Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.944.1.5Columnpm400frs04perfdatacomclientPast24StatInCrcCountPort1read-onlycurrentClient Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value
1.3.6.1.4.1.20044.100.11.6.944.1.6Columnpm400frs04perfdatacomclientPast24StatInPacketCountInvPort1read-onlycurrentClient Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid
1.3.6.1.4.1.20044.100.11.6.944.1.7Columnpm400frs04perfdatacomclientPast24StatInPacketCountPort1read-onlycurrentClient Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value
1.3.6.1.4.1.20044.100.11.6.944.1.28Columnpm400frs04perfdatacomclientPast24StatOutCrcCountInvPort1read-onlycurrentClient Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid
1.3.6.1.4.1.20044.100.11.6.944.1.29Columnpm400frs04perfdatacomclientPast24StatOutCrcCountPort1read-onlycurrentClient Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value
1.3.6.1.4.1.20044.100.11.6.944.1.30Columnpm400frs04perfdatacomclientPast24StatOutPacketCountInvPort1read-onlycurrentClient Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid
1.3.6.1.4.1.20044.100.11.6.944.1.31Columnpm400frs04perfdatacomclientPast24StatOutPacketCountPort1read-onlycurrentClient Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value
1.3.6.1.4.1.20044.100.11.7Nodepm400frs04MonPerfLine
1.3.6.1.4.1.20044.100.11.7.336Tablepm400frs04PerfTelecomLinePostFecCurrent15StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomLinePostFecCurrent15Stat Article
1.3.6.1.4.1.20044.100.11.7.336.1Rowpm400frs04PerfTelecomLinePostFecCurrent15StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomLinePostFecCurrent15Stat table
1.3.6.1.4.1.20044.100.11.7.336.1.1Columnpm400frs04PerfTelecomLinePostFecCurrent15StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomLinePostFecCurrent15Stat table
1.3.6.1.4.1.20044.100.11.7.336.1.2Columnpm400frs04PerfTelecomLinePostFecCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.336.1.3Columnpm400frs04PerfTelecomLinePostFecCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.336.1.4Columnpm400frs04PerfTelecomLinePostFecCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.336.1.5Columnpm400frs04PerfTelecomLinePostFecCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.336.1.6Columnpm400frs04PerfTelecomLinePostFecCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.336.1.7Columnpm400frs04PerfTelecomLinePostFecCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.336.1.8Columnpm400frs04PerfTelecomLinePostFecCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.336.1.9Columnpm400frs04PerfTelecomLinePostFecCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.7.336.1.10Columnpm400frs04PerfTelecomLinePostFecCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.336.1.11Columnpm400frs04PerfTelecomLinePostFecCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.7.337Tablepm400frs04PerfTelecomLinePostFecPast15StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomLinePostFecPast15StatHistory Article
1.3.6.1.4.1.20044.100.11.7.337.1Rowpm400frs04PerfTelecomLinePostFecPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomLinePostFecPast15StatHistory table
1.3.6.1.4.1.20044.100.11.7.337.1.1Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomLinePostFecPast15StatHistory table
1.3.6.1.4.1.20044.100.11.7.337.1.2Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.337.1.3Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.337.1.4Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.337.1.5Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.337.1.6Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.337.1.7Columnpm400frs04PerfTelecomLinePostFecPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.337.1.8Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.337.1.9Columnpm400frs04PerfTelecomLinePostFecPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.7.337.1.10Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.337.1.11Columnpm400frs04PerfTelecomLinePostFecPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.7.338Tablepm400frs04PerfTelecomLinePostFecCurrent24StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomLinePostFecCurrent24Stat Article
1.3.6.1.4.1.20044.100.11.7.338.1Rowpm400frs04PerfTelecomLinePostFecCurrent24StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomLinePostFecCurrent24Stat table
1.3.6.1.4.1.20044.100.11.7.338.1.1Columnpm400frs04PerfTelecomLinePostFecCurrent24StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomLinePostFecCurrent24Stat table
1.3.6.1.4.1.20044.100.11.7.338.1.2Columnpm400frs04PerfTelecomLinePostFecCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.338.1.3Columnpm400frs04PerfTelecomLinePostFecCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.338.1.4Columnpm400frs04PerfTelecomLinePostFecCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.338.1.5Columnpm400frs04PerfTelecomLinePostFecCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.338.1.6Columnpm400frs04PerfTelecomLinePostFecCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.338.1.7Columnpm400frs04PerfTelecomLinePostFecCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.338.1.8Columnpm400frs04PerfTelecomLinePostFecCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.338.1.9Columnpm400frs04PerfTelecomLinePostFecCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.7.338.1.10Columnpm400frs04PerfTelecomLinePostFecCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.338.1.11Columnpm400frs04PerfTelecomLinePostFecCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.7.339Tablepm400frs04PerfTelecomLinePostFecPast24StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomLinePostFecPast24StatHistory Article
1.3.6.1.4.1.20044.100.11.7.339.1Rowpm400frs04PerfTelecomLinePostFecPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomLinePostFecPast24StatHistory table
1.3.6.1.4.1.20044.100.11.7.339.1.1Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomLinePostFecPast24StatHistory table
1.3.6.1.4.1.20044.100.11.7.339.1.2Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.339.1.3Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.339.1.4Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.339.1.5Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.339.1.6Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.339.1.7Columnpm400frs04PerfTelecomLinePostFecPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.339.1.8Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.339.1.9Columnpm400frs04PerfTelecomLinePostFecPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.100.11.7.339.1.10Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.339.1.11Columnpm400frs04PerfTelecomLinePostFecPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.100.11.7.352Tablepm400frs04PerfTelecomBerLinePreFecCurrent15StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomBerLinePreFecCurrent15Stat Article
1.3.6.1.4.1.20044.100.11.7.352.1Rowpm400frs04PerfTelecomBerLinePreFecCurrent15StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomBerLinePreFecCurrent15Stat table
1.3.6.1.4.1.20044.100.11.7.352.1.1Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomBerLinePreFecCurrent15Stat table
1.3.6.1.4.1.20044.100.11.7.352.1.2Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatInvBerPortnread-onlycurrentCurrent 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.352.1.3Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatBerValuePortnread-onlycurrentCurrent 15-min BER counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.352.1.4Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortnread-onlycurrentCurrent 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.352.1.5Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortnread-onlycurrentCurrent 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.352.1.6Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortnread-onlycurrentCurrent 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.352.1.7Columnpm400frs04PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortnread-onlycurrentCurrent 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.353Tablepm400frs04PerfTelecomBerLinePreFecPast15StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomBerLinePreFecPast15StatHistory Article
1.3.6.1.4.1.20044.100.11.7.353.1Rowpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomBerLinePreFecPast15StatHistory table
1.3.6.1.4.1.20044.100.11.7.353.1.1Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomBerLinePreFecPast15StatHistory table
1.3.6.1.4.1.20044.100.11.7.353.1.2Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1read-onlycurrentPrevious 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.353.1.3Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1read-onlycurrentPrevious 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.353.1.4Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1read-onlycurrentPrevious 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.353.1.5Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1read-onlycurrentPrevious 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.353.1.6Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1read-onlycurrentPrevious 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.353.1.7Columnpm400frs04PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1read-onlycurrentPrevious 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.354Tablepm400frs04PerfTelecomBerLinePreFecCurrent24StatTablenot-accessiblecurrentList of pm400frs04PerfTelecomBerLinePreFecCurrent24Stat Article
1.3.6.1.4.1.20044.100.11.7.354.1Rowpm400frs04PerfTelecomBerLinePreFecCurrent24StatEntrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomBerLinePreFecCurrent24Stat table
1.3.6.1.4.1.20044.100.11.7.354.1.1Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatIndexread-onlycurrentIndex definition for the pm400frs04PerfTelecomBerLinePreFecCurrent24Stat table
1.3.6.1.4.1.20044.100.11.7.354.1.2Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatInvBerPortnread-onlycurrentCurrent 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.354.1.3Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatBerValuePortnread-onlycurrentCurrent 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.354.1.4Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortnread-onlycurrentCurrent 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.354.1.5Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortnread-onlycurrentCurrent 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.354.1.6Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortnread-onlycurrentCurrent 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.354.1.7Columnpm400frs04PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortnread-onlycurrentCurrent 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.355Tablepm400frs04PerfTelecomBerLinePreFecPast24StatHistoryPort1Tablenot-accessiblecurrentList of pm400frs04PerfTelecomBerLinePreFecPast24StatHistory Article
1.3.6.1.4.1.20044.100.11.7.355.1Rowpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pm400frs04PerfTelecomBerLinePreFecPast24StatHistory table
1.3.6.1.4.1.20044.100.11.7.355.1.1Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pm400frs04PerfTelecomBerLinePreFecPast24StatHistory table
1.3.6.1.4.1.20044.100.11.7.355.1.2Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1read-onlycurrentPrevious 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.100.11.7.355.1.3Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1read-onlycurrentPrevious 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.100.11.7.355.1.4Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1read-onlycurrentPrevious 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.355.1.5Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1read-onlycurrentPrevious 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.100.11.7.355.1.6Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1read-onlycurrentPrevious 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.100.11.7.355.1.7Columnpm400frs04PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1read-onlycurrentPrevious 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value
Type Definitions
NameSyntaxStatusDescription
Pm400frs04ClientBistINTEGER { bistdisable(0), bisttxenable(1), bistrxEnable(2) }currentMode for BIST
Pm400frs04ClientModeAINTEGER { clientmode4x100gbe(1), clientmode400gbe(2) }currentDifferent values on the client mode
Pm400frs04ClientProtocolAINTEGER { protocolclientotu4(1), protocolclient100gbe(2) }currentDifferent values on the protocol on the client ports
Pm400frs04DccModeINTEGER { dccOff(0), dccOn(1) }currentMode for DCC
Pm400frs04ModuleModeAINTEGER { modulemodea100gulh(1008), modulemodea200glh(688), modulemodea400g(128) }currentDifferent values on the module mode
Pm400frs04ModuleModeBINTEGER { modulemodeb100gulh(1008), modulemodeb200glh(688), modulemodeb400gma(128), modulemodeb200gmr(609), modulemodeb300gmr(321), modulemodeb500gzr(1184), modulemodeb600gzr(1136) }currentDifferent values on the module mode
Pm400frs04ModuleModeCINTEGER { modulemodec100gulh(1008), modulemodec200glh(688), modulemodec200gmr(609), modulemodec300gmr(321), modulemodec400gma(128), modulemodec200gmrmaster(610), modulemodec200gmrslave (611), modulemodec200glhmaster(689), modulemodec200glhslave(690) }currentDifferent values on the module mode
Pm400frs04OrxChannelINTEGERcurrentChannel selection on transceiver Rx line ports
Pm400frs04OtxChannelINTEGERcurrentChannel selection on transceiver Tx line ports
Pm400frs04OtxGridINTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50), otxgrid25(25) }currentDifferent grids on OTX-TLH on client and line ports
MIB Viewer