EKINOPS-Pm800fr04-MIB
808 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.120 | IdentitymodulePm800fr04 | Creation. | ||
| 1.3.6.1.4.1.20044.120.2 | Nodepm800fr04alarms | |||
| 1.3.6.1.4.1.20044.120.2.1 | Nodepm800fr04AlmOther | |||
| 1.3.6.1.4.1.20044.120.2.1.1 | Nodepm800fr04AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.120.2.1.1.2 | Nodepm800fr04AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.120.2.1.1.2.1 | Scalarpm800fr04AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.120.2.1.1.2.2 | Scalarpm800fr04AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.120.2.1.1.2.3 | Scalarpm800fr04AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.120.2.1.1.2.4 | Scalarpm800fr04AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.120.2.1.1.2.5 | Scalarpm800fr04AlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.120.2.1.2 | Nodepm800fr04AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.120.2.1.2.336 | Nodepm800fr04AlmmodFanFail | |||
| 1.3.6.1.4.1.20044.120.2.1.2.336.2 | Scalarpm800fr04AlmFanHighSpeed | read-only | current | Fan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro… |
| 1.3.6.1.4.1.20044.120.2.1.3 | Nodepm800fr04AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.120.2.1.3.0 | Nodepm800fr04AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.120.2.1.3.0.9 | Scalarpm800fr04AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.120.2.1.3.0.15 | Scalarpm800fr04AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Fuse A Status <Condtype> DEF_FUSE_A <Probcause> powerProblem (36… |
| 1.3.6.1.4.1.20044.120.2.1.3.0.16 | Scalarpm800fr04AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Fuse B Status <Condtype> DEF_FUSE_B <Probcause> powerProblem (36… |
| 1.3.6.1.4.1.20044.120.2.1.3.78 | Nodepm800fr04AlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.120.2.1.3.78.6 | Scalarpm800fr04AlmMsaReady | read-only | current | Line Optical Module Ready :This OID indicates the Line Optical Module is ready to operate <Help> Status indicating the Line Optical Module is ready to operate … |
| 1.3.6.1.4.1.20044.120.2.1.3.78.12 | Scalarpm800fr04AlmModesNotSupported | read-only | current | Line Mode Not Supported :This OID indicates the configured Line Mode is not supported on this version of module.<Help> This alarm indicates the configured Line… |
| 1.3.6.1.4.1.20044.120.2.1.3.78.13 | Scalarpm800fr04AlmMsaTempShutdown | read-only | current | Line Optical Module Temperature Shutdown :This OID indicates a Optical Module shutdown caused by a temperature is out of range<Help> Alarm indicating a Optical… |
| 1.3.6.1.4.1.20044.120.2.2 | Nodepm800fr04AlmClient | |||
| 1.3.6.1.4.1.20044.120.2.2.1 | Nodepm800fr04AlmClientNurg | |||
| 1.3.6.1.4.1.20044.120.2.2.1.272 | Tablepm800fr04AlmclientSfpWarnDdmTable | not-accessible | current | List of pm800fr04AlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1 | Rowpm800fr04AlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm800fr04AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.1 | Columnpm800fr04AlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm800fr04AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.2 | Columnpm800fr04AlmTxPwLowWngPortn | read-only | current | Client Optical Module Tx Power Low Warning :This OID indicates that the Optical Module output power is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.3 | Columnpm800fr04AlmTxPwrHighWngPortn | read-only | current | Client Optical Module Tx Power High Warning :This OID indicates that the Optical Module output power is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.4 | Columnpm800fr04AlmTxBiasLowWngPortn | read-only | current | Client Optical Module Bias Low Warning :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.5 | Columnpm800fr04AlmTxBiasHighWngPortn | read-only | current | Client Optical Module Bias High Warning :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.6 | Columnpm800fr04AlmVccLowWngPortn | read-only | current | Client Optical Module Power Supply Low Warning :This OID indicates that the Optical Module power supply of port is lower than the threshold value written in th… |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.7 | Columnpm800fr04AlmVccHighWngPortn | read-only | current | Client Optical Module Power Supply High Warning :This OID indicates that the Optical Module power supply of port is higher than the threshold value written in … |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.9 | Columnpm800fr04AlmTempHighWngPortn | read-only | current | Client Optical Module Temp High Warning :This OID indicates that the Optical Module temperature of port is higher than the threshold value written in the Optic… |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.16 | Columnpm800fr04AlmRxPwrLowWngPortn | read-only | current | Client Optical Module Rx Power Low Warning :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.120.2.2.1.272.1.17 | Columnpm800fr04AlmRxPwrHighWngPortn | read-only | current | Client Optical Module Rx Power High Warning :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical M… |
| 1.3.6.1.4.1.20044.120.2.2.2 | Nodepm800fr04AlmClientUrg | |||
| 1.3.6.1.4.1.20044.120.2.2.2.240 | Tablepm800fr04AlmclientSfpAlmDdmTable | not-accessible | current | List of pm800fr04AlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1 | Rowpm800fr04AlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm800fr04AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.1 | Columnpm800fr04AlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm800fr04AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.2 | Columnpm800fr04AlmTxPwrLowAlaPortn | read-only | current | Client Optical Module Tx Power Low Alarm :This OID indicates that the Optical Module output power of port is lower than the threshold value written in the Opti… |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.3 | Columnpm800fr04AlmTxPwrHighAlaPortn | read-only | current | Client Optical Module Tx Power High Alarm :This OID indicates that the Optical Module output power of port is higher than the threshold value written in the Op… |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.4 | Columnpm800fr04AlmTxBiasLowAlaPortn | read-only | current | Client Optical Module Bias Low Alarm :This OID indicates that the Optical Module laser bias current of port is lower than the threshold value written in the Op… |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.5 | Columnpm800fr04AlmTxBiasHighAlaPortn | read-only | current | Client Optical Module Bias High Alarm :This OID indicates that the Optical Module laser bias current of port is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.6 | Columnpm800fr04AlmVccLowAlaPortn | read-only | current | Client Optical Module Power Supply Low Alarm :This OID indicates that the Optical Module power supply of port is lower than the threshold value written in the … |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.7 | Columnpm800fr04AlmVccHighAlaPortn | read-only | current | Client Optical Module Power Supply High Alarm :This OID indicates that the Optical Module power supply of port is higher than the threshold value written in th… |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.9 | Columnpm800fr04AlmTempHighAlaPortn | read-only | current | Client Optical Module Temp High Alarm :This OID indicates that the Optical Module temperature of port is higher than the threshold value written in the Optical… |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.16 | Columnpm800fr04AlmRxPwrLowAlaPortn | read-only | current | Client Optical Module Rx Power Low Alarm :This OID indicates that the Optical Module input power of port is lower than the threshold value written in the Optic… |
| 1.3.6.1.4.1.20044.120.2.2.2.240.1.17 | Columnpm800fr04AlmRxPwrHighAlaPortn | read-only | current | Client Optical Module Rx Power High Alarm :This OID indicates that the Optical Module input power of port is higher than the threshold value written in the Opt… |
| 1.3.6.1.4.1.20044.120.2.2.3 | Nodepm800fr04AlmClientCrit | |||
| 1.3.6.1.4.1.20044.120.2.2.3.8 | Tablepm800fr04AlmsynthAlmPortTable | not-accessible | current | List of pm800fr04AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1 | Rowpm800fr04AlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm800fr04AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.1 | Columnpm800fr04AlmsynthAlmPortIndex | read-only | current | Index definition for the pm800fr04AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.2 | Columnpm800fr04AlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> Alarm indicating client optical interface absen… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.3 | Columnpm800fr04AlmDdmAbsentPortn | read-only | current | DDM Supported On Client Optical Module :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status i… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.5 | Columnpm800fr04AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> Alarm indicating a failure on client port, most probabl… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.6 | Columnpm800fr04AlmDwLsdPortn | read-only | current | Client Optical Module Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> Alarm indicating the client transceiver laser is shutd… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.7 | Columnpm800fr04AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> Client port service state <Condtype>… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.9 | Columnpm800fr04AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> Client Alarm Indication Signal insertion status on the clien… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.10 | Columnpm800fr04AlmSfpDdmWarningPortn | read-only | current | Warning On Client Optical Module DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help>DDM Warning has been detected on the… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.11 | Columnpm800fr04AlmSfpDdmAlmPortn | read-only | current | Alarm On Client Optical Module DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> DDM Alarm has been detected on the cli… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.13 | Columnpm800fr04AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> Alarm indicating a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equi… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.14 | Columnpm800fr04AlmClientLoopbackOnPortn | read-only | current | Client Loopback Enabled :This OID indicates a loopback is enabled on the port <Help> Alarm indicating a loopback is enabled on the port <Condtype> CLIENT_LOOPB… |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.16 | Columnpm800fr04Alm100gbeBjfecEnabledPortn | read-only | current | 100GbE BJ-FEC Enabled :This OID indicates 100GbE BJ-FEC status on the port.<Help> If status is inactive, either the interface is not 100GbE BJ-FEC capable, or … |
| 1.3.6.1.4.1.20044.120.2.2.3.8.1.17 | Columnpm800fr04AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> Client Signal Fail insertion status on the line sig… |
| 1.3.6.1.4.1.20044.120.2.2.3.152 | Tablepm800fr04AlmclientHostLaneFaultTable | not-accessible | current | List of pm800fr04AlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1 | Rowpm800fr04AlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm800fr04AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.1 | Columnpm800fr04AlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm800fr04AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.2 | Columnpm800fr04AlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.3 | Columnpm800fr04AlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Optical Module <Help> Alarm indicating a Loss of Signal is detected … |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.4 | Columnpm800fr04AlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.5 | Columnpm800fr04AlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.6 | Columnpm800fr04AlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.7 | Columnpm800fr04AlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> Alarm indicating a Client Signal… |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.8 | Columnpm800fr04AlmClientInitNotComplPortn | read-only | current | Client Optical Module Initialization :This OID indicates that the Client transceiver is initializing. <Help> Client Optical Module initialization in progress. … |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.10 | Columnpm800fr04AlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Optical Module Host Lane <Help> Alarm indicating a Tx Loss of Lock on the … |
| 1.3.6.1.4.1.20044.120.2.2.3.152.1.11 | Columnpm800fr04AlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Optical Module Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client… |
| 1.3.6.1.4.1.20044.120.2.3 | Nodepm800fr04AlmLine | |||
| 1.3.6.1.4.1.20044.120.2.3.1 | Nodepm800fr04AlmLineNurg | |||
| 1.3.6.1.4.1.20044.120.2.3.1.184 | Tablepm800fr04AlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pm800fr04AlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1 | Rowpm800fr04AlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pm800fr04AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.1 | Columnpm800fr04AlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pm800fr04AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.2 | Columnpm800fr04AlmLineRxPowerLowAlarmPortn | read-only | current | Line Optical Module Rx Power Low Alarm :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.3 | Columnpm800fr04AlmLineRxPowerLowWarningPortn | read-only | current | Line Optical Module Rx Power Low Warning :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.4 | Columnpm800fr04AlmLineRxPowerHighWarningPortn | read-only | current | Line Optical Module Rx Power High Warning :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.5 | Columnpm800fr04AlmLineRxPowerHighAlarmPortn | read-only | current | Line Optical Module Rx Power High Alarm :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.8 | Columnpm800fr04AlmLineLaserTempHighWarningPortn | read-only | current | Line Optical Module Temp High Warning :This OID indicates that the Optical Module Temperature is higher than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.9 | Columnpm800fr04AlmLineLaserTempHighAlarmPortn | read-only | current | Line Optical Module Temp High Alarm :This OID indicates that the Optical Module Temperature is higher than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.10 | Columnpm800fr04AlmLineTxPowerLowAlarmPortn | read-only | current | Line Optical Module Tx Power Low Alarm :This OID indicates that the Optical Module output power is lower than the threshold value written in the Optical Module… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.11 | Columnpm800fr04AlmLineTxPowerLowWarningPortn | read-only | current | Line Optical Module Tx Power Low Warning :This OID indicates that the Optical Module output power is lower than the threshold value written in the Optical Modu… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.12 | Columnpm800fr04AlmLineTxPowerHighWarningPortn | read-only | current | Line Optical Module Tx Power High Warning :This OID indicates that the Optical Module output power is higher than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.120.2.3.1.184.1.13 | Columnpm800fr04AlmLineTxPowerHighAlarmPortn | read-only | current | Line Optical Module Tx Power High Alarm :This OID indicates that the Optical Module output power is higher than the threshold value written in the Optical Modu… |
| 1.3.6.1.4.1.20044.120.2.3.1.188 | Tablepm800fr04AlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pm800fr04AlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1 | Rowpm800fr04AlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pm800fr04AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.1 | Columnpm800fr04AlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pm800fr04AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.8 | Columnpm800fr04AlmRxLaserTempHighWarningPortn | read-only | current | Line Optical Module Rx Laser Temp High Warning :This OID indicates that the Optical Module Rx Laser Temperature is higher than the threshold value written in t… |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.9 | Columnpm800fr04AlmRxLaserTempHighAlarmPortn | read-only | current | Line Optical Module Rx Laser Temp High Alarm :This OID indicates that the Optical Module Rx Laser Temperature is higher than the threshold value written in the… |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.10 | Columnpm800fr04AlmRxLaserOutputLowAlarmPortn | read-only | current | Line Optical Module Rx Output Power Low Alarm :This OID indicates that the Optical Module Rx output power is lower than the threshold value written in the Opti… |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.11 | Columnpm800fr04AlmRxLaserOutputLowWarningPortn | read-only | current | Line Optical Module Rx Output Power Low Warning :This OID indicates that the Optical Module Rx output power is lower than the threshold value written in the Op… |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.12 | Columnpm800fr04AlmRxLaserOutputHighWarningPortn | read-only | current | Line Optical Module Rx Output Power High Warning :This OID indicates that the Optical Module Rx output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.120.2.3.1.188.1.13 | Columnpm800fr04AlmRxLaserOutputHighAlarmPortn | read-only | current | Line Optical Module Rx Output Power High Alarm :This OID indicates that the Optical Module Rx output power is higher than the threshold value written in the Op… |
| 1.3.6.1.4.1.20044.120.2.3.2 | Nodepm800fr04AlmLineUrg | |||
| 1.3.6.1.4.1.20044.120.2.3.3 | Nodepm800fr04AlmLineCrit | |||
| 1.3.6.1.4.1.20044.120.2.3.3.40 | Tablepm800fr04AlmsynthAlmLineTable | not-accessible | current | List of pm800fr04AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1 | Rowpm800fr04AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm800fr04AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.1 | Columnpm800fr04AlmsynthAlmLineIndex | read-only | current | Index definition for the pm800fr04AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.2 | Columnpm800fr04AlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> Alarm indicating Line optical module absent or not detect… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.3 | Columnpm800fr04AlmXfpInitNotComplPortn | read-only | current | Line Optical Module Initialization :This OID indicates that the Line transceiver is initializing. <Help> Line Optical Module initialization in progress. This o… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.5 | Columnpm800fr04AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.6 | Columnpm800fr04AlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> Line interface transmit state <Condtype> XFP_TX_OFF <Probc… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.7 | Columnpm800fr04AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> Line port service state <Condtype> LINE_LOCAL_OOS <P… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.9 | Columnpm800fr04AlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.10 | Columnpm800fr04AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> DDM Warning has been detected on the line… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.11 | Columnpm800fr04AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> DDM Alarm has been detected on the line tran… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.13 | Columnpm800fr04AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> Alarm indicating a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentM… |
| 1.3.6.1.4.1.20044.120.2.3.3.40.1.14 | Columnpm800fr04AlmLineLoopbackOnPortn | read-only | current | Line Loopback Enabled :This OID indicates a loopback is enabled on the port <Help> Alarm indicating a loopback is enabled on the port <Condtype> LINE_LOOPBACK_… |
| 1.3.6.1.4.1.20044.120.2.3.3.196 | Tablepm800fr04AlmlineHostLaneFaultTable | not-accessible | current | List of pm800fr04AlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.120.2.3.3.196.1 | Rowpm800fr04AlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm800fr04AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.120.2.3.3.196.1.1 | Columnpm800fr04AlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm800fr04AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.120.2.3.3.196.1.2 | Columnpm800fr04AlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Optical Module <Help> Alarm indicating a Loss of Signal is detected on t… |
| 1.3.6.1.4.1.20044.120.2.3.3.196.1.3 | Columnpm800fr04AlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating frame alignment errors on line interface… |
| 1.3.6.1.4.1.20044.120.2.3.3.196.1.4 | Columnpm800fr04AlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication(BDI) Sigal is inserted on the Line <Help> Status indicating a SM Backward Defect Indic… |
| 1.3.6.1.4.1.20044.120.2.3.3.196.1.5 | Columnpm800fr04AlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication(BDI) Signal is received from the Line <Help> Alarm indicating a SM Backward Defect Ind… |
| 1.3.6.1.4.1.20044.120.3 | Nodepm800fr04measures | |||
| 1.3.6.1.4.1.20044.120.3.1 | Nodepm800fr04MesrOther | |||
| 1.3.6.1.4.1.20044.120.3.1.0 | Scalarpm800fr04Mesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.120.3.1.1 | Scalarpm800fr04Mesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.120.3.1.7 | Scalarpm800fr04MesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.120.3.1.212 | Scalarpm800fr04MesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Optical Module Tx Laser Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the D… |
| 1.3.6.1.4.1.20044.120.3.1.215 | Scalarpm800fr04MesrlineNetRxLaserInputPwrMin | read-only | current | Min Line Optical Module Rx Laser Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digita… |
| 1.3.6.1.4.1.20044.120.3.1.216 | Scalarpm800fr04MesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.120.3.1.221 | Scalarpm800fr04MesrlineNetRxTotalInputPwrMin | read-only | current | Min Line Optical Module Rx Total Power :This OID gives the minimum Total Receive power value among the network lanes of the Line Transceiver, read in the DDM (… |
| 1.3.6.1.4.1.20044.120.3.1.228 | Scalarpm800fr04MesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Optical Module Tx Laser Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the D… |
| 1.3.6.1.4.1.20044.120.3.1.231 | Scalarpm800fr04MesrlineNetRxLaserInputPwrMax | read-only | current | Max Line Optical Module Rx Laser Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digita… |
| 1.3.6.1.4.1.20044.120.3.1.232 | Scalarpm800fr04MesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.120.3.1.237 | Scalarpm800fr04MesrlineNetRxTotalInputPwrMax | read-only | current | Max Line Optical Module Rx Total Power :This OID gives the maximum Total Receive power value among the network lanes of the Line Transceiver, read in the DDM (… |
| 1.3.6.1.4.1.20044.120.3.1.240 | Scalarpm800fr04MesrmodulePwrDissipation | read-only | current | Module Power Dissipation :This OID gives the Total Power consumption of the module with its Optical Modules (Power = AV_U16/100) (Unit = W)<Help> This Measure … |
| 1.3.6.1.4.1.20044.120.3.2 | Nodepm800fr04MesrClient | |||
| 1.3.6.1.4.1.20044.120.3.2.16 | Tablepm800fr04MesrclientTxPwrMinTable | not-accessible | current | List of pm800fr04MesrclientTxPwrMin Article |
| 1.3.6.1.4.1.20044.120.3.2.16.1 | Rowpm800fr04MesrclientTxPwrMinEntry | not-accessible | current | Row definition for the pm800fr04MesrclientTxPwrMin table |
| 1.3.6.1.4.1.20044.120.3.2.16.1.1 | Columnpm800fr04MesrclientTxPwrMinIndex | read-only | current | Index definition for the pm800fr04MesrclientTxPwrMin table |
| 1.3.6.1.4.1.20044.120.3.2.16.1.2 | Columnpm800fr04MesrclientTxPwrMinPortn | read-only | current | Min Client Tx Power Per Lane :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.120.3.2.36 | Tablepm800fr04MesrclientRxPwrMinTable | not-accessible | current | List of pm800fr04MesrclientRxPwrMin Article |
| 1.3.6.1.4.1.20044.120.3.2.36.1 | Rowpm800fr04MesrclientRxPwrMinEntry | not-accessible | current | Row definition for the pm800fr04MesrclientRxPwrMin table |
| 1.3.6.1.4.1.20044.120.3.2.36.1.1 | Columnpm800fr04MesrclientRxPwrMinIndex | read-only | current | Index definition for the pm800fr04MesrclientRxPwrMin table |
| 1.3.6.1.4.1.20044.120.3.2.36.1.2 | Columnpm800fr04MesrclientRxPwrMinPortn | read-only | current | Min Client Rx Power Per Lane :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diag… |
| 1.3.6.1.4.1.20044.120.3.2.56 | Tablepm800fr04MesrclientTxPwrMaxTable | not-accessible | current | List of pm800fr04MesrclientTxPwrMax Article |
| 1.3.6.1.4.1.20044.120.3.2.56.1 | Rowpm800fr04MesrclientTxPwrMaxEntry | not-accessible | current | Row definition for the pm800fr04MesrclientTxPwrMax table |
| 1.3.6.1.4.1.20044.120.3.2.56.1.1 | Columnpm800fr04MesrclientTxPwrMaxIndex | read-only | current | Index definition for the pm800fr04MesrclientTxPwrMax table |
| 1.3.6.1.4.1.20044.120.3.2.56.1.2 | Columnpm800fr04MesrclientTxPwrMaxPortn | read-only | current | Max Client Tx Power Per Lane :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.120.3.2.76 | Tablepm800fr04MesrclientRxPwrMaxTable | not-accessible | current | List of pm800fr04MesrclientRxPwrMax Article |
| 1.3.6.1.4.1.20044.120.3.2.76.1 | Rowpm800fr04MesrclientRxPwrMaxEntry | not-accessible | current | Row definition for the pm800fr04MesrclientRxPwrMax table |
| 1.3.6.1.4.1.20044.120.3.2.76.1.1 | Columnpm800fr04MesrclientRxPwrMaxIndex | read-only | current | Index definition for the pm800fr04MesrclientRxPwrMax table |
| 1.3.6.1.4.1.20044.120.3.2.76.1.2 | Columnpm800fr04MesrclientRxPwrMaxPortn | read-only | current | Max Client Rx Power Per Lane :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.120.3.2.96 | Tablepm800fr04MesrclientTxTempTable | not-accessible | current | List of pm800fr04MesrclientTxTemp Article |
| 1.3.6.1.4.1.20044.120.3.2.96.1 | Rowpm800fr04MesrclientTxTempEntry | not-accessible | current | Row definition for the pm800fr04MesrclientTxTemp table |
| 1.3.6.1.4.1.20044.120.3.2.96.1.1 | Columnpm800fr04MesrclientTxTempIndex | read-only | current | Index definition for the pm800fr04MesrclientTxTemp table |
| 1.3.6.1.4.1.20044.120.3.2.96.1.2 | Columnpm800fr04MesrclientTxTempPortn | read-only | current | Client Optical Module Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV… |
| 1.3.6.1.4.1.20044.120.3.2.116 | Tablepm800fr04MesrclientTxPowerSupplyTable | not-accessible | current | List of pm800fr04MesrclientTxPowerSupply Article |
| 1.3.6.1.4.1.20044.120.3.2.116.1 | Rowpm800fr04MesrclientTxPowerSupplyEntry | not-accessible | current | Row definition for the pm800fr04MesrclientTxPowerSupply table |
| 1.3.6.1.4.1.20044.120.3.2.116.1.1 | Columnpm800fr04MesrclientTxPowerSupplyIndex | read-only | current | Index definition for the pm800fr04MesrclientTxPowerSupply table |
| 1.3.6.1.4.1.20044.120.3.2.116.1.2 | Columnpm800fr04MesrclientTxPowerSupplyPortn | read-only | current | Client Optical Module Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage =… |
| 1.3.6.1.4.1.20044.120.3.2.256 | Tablepm800fr04MesrclientTxCompositePwrTable | not-accessible | current | List of pm800fr04MesrclientTxCompositePwr Article |
| 1.3.6.1.4.1.20044.120.3.2.256.1 | Rowpm800fr04MesrclientTxCompositePwrEntry | not-accessible | current | Row definition for the pm800fr04MesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.120.3.2.256.1.1 | Columnpm800fr04MesrclientTxCompositePwrIndex | read-only | current | Index definition for the pm800fr04MesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.120.3.2.256.1.2 | Columnpm800fr04MesrclientTxCompositePwrPortn | read-only | current | Client Composite Tx Power :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.120.3.2.288 | Tablepm800fr04MesrclientRxCompositePwrTable | not-accessible | current | List of pm800fr04MesrclientRxCompositePwr Article |
| 1.3.6.1.4.1.20044.120.3.2.288.1 | Rowpm800fr04MesrclientRxCompositePwrEntry | not-accessible | current | Row definition for the pm800fr04MesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.120.3.2.288.1.1 | Columnpm800fr04MesrclientRxCompositePwrIndex | read-only | current | Index definition for the pm800fr04MesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.120.3.2.288.1.2 | Columnpm800fr04MesrclientRxCompositePwrPortn | read-only | current | Client Composite Rx Power :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.120.3.3 | Nodepm800fr04MesrLine | |||
| 1.3.6.1.4.1.20044.120.3.3.12 | Scalarpm800fr04MesrlineMsaTemp | read-only | current | Line Optical Module Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature =… |
| 1.3.6.1.4.1.20044.120.3.3.13 | Scalarpm800fr04MesrlineMsa3v3Voltage | read-only | current | Line Optical Module Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/… |
| 1.3.6.1.4.1.20044.120.3.3.144 | Tablepm800fr04MesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of pm800fr04MesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.120.3.3.144.1 | Rowpm800fr04MesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the pm800fr04MesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.120.3.3.144.1.1 | Columnpm800fr04MesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the pm800fr04MesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.120.3.3.144.1.2 | Columnpm800fr04MesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Optical Module Tx Laser Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monit… |
| 1.3.6.1.4.1.20044.120.3.3.156 | Tablepm800fr04MesrlineNetRxLaserInputPwrTable | not-accessible | current | List of pm800fr04MesrlineNetRxLaserInputPwr Article |
| 1.3.6.1.4.1.20044.120.3.3.156.1 | Rowpm800fr04MesrlineNetRxLaserInputPwrEntry | not-accessible | current | Row definition for the pm800fr04MesrlineNetRxLaserInputPwr table |
| 1.3.6.1.4.1.20044.120.3.3.156.1.1 | Columnpm800fr04MesrlineNetRxLaserInputPwrIndex | read-only | current | Index definition for the pm800fr04MesrlineNetRxLaserInputPwr table |
| 1.3.6.1.4.1.20044.120.3.3.156.1.2 | Columnpm800fr04MesrlineNetRxLaserInputPwrPortn | read-only | current | Current Line Optical Module Rx Laser Power :This OID gives the Rx Laser received power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monit… |
| 1.3.6.1.4.1.20044.120.3.3.160 | Tablepm800fr04MesrlineResidualChromaticDispTable | not-accessible | current | List of pm800fr04MesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.120.3.3.160.1 | Rowpm800fr04MesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the pm800fr04MesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.120.3.3.160.1.1 | Columnpm800fr04MesrlineResidualChromaticDispIndex | read-only | current | Index definition for the pm800fr04MesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.120.3.3.160.1.2 | Columnpm800fr04MesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_U16*10) (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.120.3.3.180 | Tablepm800fr04MesrlineNetRxTotalInputPwrTable | not-accessible | current | List of pm800fr04MesrlineNetRxTotalInputPwr Article |
| 1.3.6.1.4.1.20044.120.3.3.180.1 | Rowpm800fr04MesrlineNetRxTotalInputPwrEntry | not-accessible | current | Row definition for the pm800fr04MesrlineNetRxTotalInputPwr table |
| 1.3.6.1.4.1.20044.120.3.3.180.1.1 | Columnpm800fr04MesrlineNetRxTotalInputPwrIndex | read-only | current | Index definition for the pm800fr04MesrlineNetRxTotalInputPwr table |
| 1.3.6.1.4.1.20044.120.3.3.180.1.2 | Columnpm800fr04MesrlineNetRxTotalInputPwrPortn | read-only | current | Current Line Optical Module Rx Total Power :This OID gives the Rx Total received power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monit… |
| 1.3.6.1.4.1.20044.120.4 | Nodepm800fr04counters | |||
| 1.3.6.1.4.1.20044.120.4.1 | Nodepm800fr04CntOther | |||
| 1.3.6.1.4.1.20044.120.4.2 | Nodepm800fr04CntClient | |||
| 1.3.6.1.4.1.20044.120.4.2.112 | Tablepm800fr04CntclientInputErrorCounterTable | not-accessible | current | List of pm800fr04CntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.120.4.2.112.1 | Rowpm800fr04CntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm800fr04CntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.2.112.1.1 | Columnpm800fr04CntclientInputErrorCounterIndex | read-only | current | Index definition for the pm800fr04CntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.2.112.1.2 | Columnpm800fr04CntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter gives the number of SM-BIP8 (OTU4) or BIP errors (x00GbE) received on client port <Help> This counter gives the number of SM-… |
| 1.3.6.1.4.1.20044.120.4.2.112.1.3 | Columnpm800fr04CntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.2.112.1.4 | Columnpm800fr04CntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a BIP8 error counter overload on Port |
| 1.3.6.1.4.1.20044.120.4.2.144 | Tablepm800fr04CntclientCbipCounterTable | not-accessible | current | List of pm800fr04CntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.120.4.2.144.1 | Rowpm800fr04CntclientCbipCounterEntry | not-accessible | current | Row definition for the pm800fr04CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.120.4.2.144.1.1 | Columnpm800fr04CntclientCbipCounterIndex | read-only | current | Index definition for the pm800fr04CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.120.4.2.144.1.2 | Columnpm800fr04CntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter gives the number of SM-BIP8 (OTU4) or BIP errors (x00GbE) transmitted on client port <Help>This counter gives the number of … |
| 1.3.6.1.4.1.20044.120.4.2.144.1.3 | Columnpm800fr04CntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.2.144.1.4 | Columnpm800fr04CntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a BIP8 error counter overload on Port |
| 1.3.6.1.4.1.20044.120.4.3 | Nodepm800fr04CntLine | |||
| 1.3.6.1.4.1.20044.120.4.3.192 | Tablepm800fr04CntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm800fr04CntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.120.4.3.192.1 | Rowpm800fr04CntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.192.1.1 | Columnpm800fr04CntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm800fr04CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.192.1.2 | Columnpm800fr04CntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (resi… |
| 1.3.6.1.4.1.20044.120.4.3.192.1.3 | Columnpm800fr04CntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.192.1.4 | Columnpm800fr04CntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.120.4.3.193 | Tablepm800fr04CntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm800fr04CntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.120.4.3.193.1 | Rowpm800fr04CntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.120.4.3.193.1.1 | Columnpm800fr04CntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm800fr04CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.120.4.3.193.1.2 | Columnpm800fr04CntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Error count before the Hard Decision FEC <Help> This counter gives the current Error count befor… |
| 1.3.6.1.4.1.20044.120.4.3.193.1.3 | Columnpm800fr04CntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.120.4.3.193.1.4 | Columnpm800fr04CntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.120.4.3.194 | Tablepm800fr04CntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm800fr04CntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.120.4.3.194.1 | Rowpm800fr04CntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm800fr04CntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.194.1.1 | Columnpm800fr04CntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm800fr04CntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.194.1.2 | Columnpm800fr04CntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.120.4.3.194.1.3 | Columnpm800fr04CntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.120.4.3.194.1.4 | Columnpm800fr04CntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.120.4.3.195 | Tablepm800fr04CntlineDfrmTimCntTable | not-accessible | current | List of pm800fr04CntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.120.4.3.195.1 | Rowpm800fr04CntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm800fr04CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.120.4.3.195.1.1 | Columnpm800fr04CntlineDfrmTimCntIndex | read-only | current | Index definition for the pm800fr04CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.120.4.3.195.1.2 | Columnpm800fr04CntlineDfrmTimCntValuePortn | read-only | current | Deframer Timer Counter :This OID when set indicates the deframer timer counter on Port<Help>This counter gives the deframer timer counter on Port |
| 1.3.6.1.4.1.20044.120.4.3.195.1.3 | Columnpm800fr04CntlineDfrmTimCntErrorPortn | read-only | current | Deframer Timer Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.195.1.4 | Columnpm800fr04CntlineDfrmTimCntOverloadPortn | read-only | current | Deframer Timer Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.120.4.3.196 | Tablepm800fr04CntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of pm800fr04CntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.120.4.3.196.1 | Rowpm800fr04CntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.196.1.1 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the pm800fr04CntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.196.1.2 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre FEC Errors :This OID gives the number of Bit Errors (SM-BIP8 error) before FEC<Help> This counter gives the number of Bit Errors (SM-BIP8 error) before FEC |
| 1.3.6.1.4.1.20044.120.4.3.196.1.3 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Pre FEC Counter Error :This OID when set indicates the Pre FEC Error Counter value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.196.1.4 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Pre FEC Counter Overload :This OID when set indicates a Pre FEC Error Counter overload on Port |
| 1.3.6.1.4.1.20044.120.4.3.197 | Tablepm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.120.4.3.197.1 | Rowpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.197.1.1 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.120.4.3.197.1.2 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the number of Bit Errors (residual SM-BIP8 error) after FEC<Help> his counter gives the number of Bit Errors (residual S… |
| 1.3.6.1.4.1.20044.120.4.3.197.1.3 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Uncorrected FEC Counter Error :This OID when set indicates the Uncorrected FEC Error Counter value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.197.1.4 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Uncorrected FEC Counter Overload :This OID when set indicates a Uncorrected FEC Error Counter overload on Port |
| 1.3.6.1.4.1.20044.120.4.3.198 | Tablepm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrentTable | not-accessible | current | List of pm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrent Article |
| 1.3.6.1.4.1.20044.120.4.3.198.1 | Rowpm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrentEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrent table |
| 1.3.6.1.4.1.20044.120.4.3.198.1.1 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrentIndex | read-only | current | Index definition for the pm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrent table |
| 1.3.6.1.4.1.20044.120.4.3.198.1.2 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrentValuePortn | read-only | current | Instant Pre FEC Error Rate :This OID gives the Instant Bit Error Rate (SM-BIP8 error) before FEC<Help>This counter gives the instant Bit Error Rate (SM-BIP8 er… |
| 1.3.6.1.4.1.20044.120.4.3.198.1.3 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorRateCurrentErrorPortn | read-only | current | Instant Pre FEC Rate Error :This OID when set indicates the instant Pre FEC Error Rate value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.199 | Tablepm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrentTable | not-accessible | current | List of pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrent Article |
| 1.3.6.1.4.1.20044.120.4.3.199.1 | Rowpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrentEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrent table |
| 1.3.6.1.4.1.20044.120.4.3.199.1.1 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrentIndex | read-only | current | Index definition for the pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrent table |
| 1.3.6.1.4.1.20044.120.4.3.199.1.2 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrentValuePortn | read-only | current | Instant Uncorrected FEC Error Rate :This OID gives the Instant Bit Error Rate (SM-BIP8 error) after FEC <Help> This counter gives the instant Bit Error Rate (S… |
| 1.3.6.1.4.1.20044.120.4.3.199.1.3 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateCurrentErrorPortn | read-only | current | Instant Uncorrected FEC Rate Error :This OID when set indicates the Instant Uncorrected FEC Error Rate value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.200 | Tablepm800fr04CntlocalLineTrscvPreSdFecErrorRateAverageTable | not-accessible | current | List of pm800fr04CntlocalLineTrscvPreSdFecErrorRateAverage Article |
| 1.3.6.1.4.1.20044.120.4.3.200.1 | Rowpm800fr04CntlocalLineTrscvPreSdFecErrorRateAverageEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineTrscvPreSdFecErrorRateAverage table |
| 1.3.6.1.4.1.20044.120.4.3.200.1.1 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorRateAverageIndex | read-only | current | Index definition for the pm800fr04CntlocalLineTrscvPreSdFecErrorRateAverage table |
| 1.3.6.1.4.1.20044.120.4.3.200.1.2 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorRateAverageValuePortn | read-only | current | Average Pre FEC Error Rate :This OID gives the Average Bit Error Rate (SM-BIP8 error) before FEC<Help>This counter gives the average Bit Error Rate (SM-BIP8 er… |
| 1.3.6.1.4.1.20044.120.4.3.200.1.3 | Columnpm800fr04CntlocalLineTrscvPreSdFecErrorRateAverageErrorPortn | read-only | current | Average Pre FEC Rate Error :This OID when set indicates the Average Pre FEC Error Rate value is invalid on Port |
| 1.3.6.1.4.1.20044.120.4.3.201 | Tablepm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverageTable | not-accessible | current | List of pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverage Article |
| 1.3.6.1.4.1.20044.120.4.3.201.1 | Rowpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverageEntry | not-accessible | current | Row definition for the pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverage table |
| 1.3.6.1.4.1.20044.120.4.3.201.1.1 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverageIndex | read-only | current | Index definition for the pm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverage table |
| 1.3.6.1.4.1.20044.120.4.3.201.1.2 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverageValuePortn | read-only | current | Average Uncorrected FEC Error Rate :This OID gives the Average Bit Error Rate (SM-BIP8 error) after FEC <Help> This counter gives the average Bit Error Rate (S… |
| 1.3.6.1.4.1.20044.120.4.3.201.1.3 | Columnpm800fr04CntlocalLineTrscvUncorrectedSdFecErrorRateAverageErrorPortn | read-only | current | Average Uncorrected FEC Rate Error :This OID when set indicates the Average Uncorrected FEC Error Rate value is invalid on Port |
| 1.3.6.1.4.1.20044.120.6 | Nodepm800fr04controlsWrite | |||
| 1.3.6.1.4.1.20044.120.6.1 | Nodepm800fr04CtrlOther | |||
| 1.3.6.1.4.1.20044.120.6.1.1 | Nodepm800fr04CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.120.6.1.1.1 | Scalarpm800fr04CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.120.6.1.1.2 | Scalarpm800fr04CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.120.6.1.1.10 | Scalarpm800fr04CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.120.6.1.1.14 | Scalarpm800fr04CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.120.6.1.4 | Nodepm800fr04Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.120.6.1.4.1 | Scalarpm800fr04CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.120.6.1.4.2 | Scalarpm800fr04CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.120.6.1.5 | Nodepm800fr04CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.120.6.1.5.2 | Scalarpm800fr04CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.120.6.1.5.3 | Scalarpm800fr04CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.120.6.1.5.5 | Scalarpm800fr04CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.120.6.1.5.6 | Scalarpm800fr04CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.120.6.1.6 | Nodepm800fr04CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.120.6.1.6.1 | Scalarpm800fr04CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.120.6.1.6.5 | Scalarpm800fr04CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.120.6.1.6.6 | Scalarpm800fr04CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.120.6.1.6.7 | Scalarpm800fr04CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.120.6.1.6.8 | Scalarpm800fr04CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.120.6.1.192 | Nodepm800fr04CtrlledTest | |||
| 1.3.6.1.4.1.20044.120.6.1.192.1 | Scalarpm800fr04CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs green |
| 1.3.6.1.4.1.20044.120.6.1.192.2 | Scalarpm800fr04CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs red |
| 1.3.6.1.4.1.20044.120.6.1.192.3 | Scalarpm800fr04CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs OFF |
| 1.3.6.1.4.1.20044.120.6.1.201 | Nodepm800fr04CtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.120.6.1.201.1 | Scalarpm800fr04CtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.120.6.1.213 | Nodepm800fr04CtrlforceLineRestart | |||
| 1.3.6.1.4.1.20044.120.6.1.213.1 | Scalarpm800fr04CtrlForceLineRestart | read-write | current | Force Line Restart :This OID forces the restart of the line after a temperature shutdown<Help> This maintenance parameter initiates the restart of the line aft… |
| 1.3.6.1.4.1.20044.120.6.1.258 | Nodepm800fr04CtrlresetCountModule | |||
| 1.3.6.1.4.1.20044.120.6.1.258.1 | Scalarpm800fr04CtrlResetcountmodule | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.120.6.1.259 | Nodepm800fr04CtrlresetCount | |||
| 1.3.6.1.4.1.20044.120.6.1.259.1 | Scalarpm800fr04CtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.120.6.1.260 | Nodepm800fr04CtrlresetRmon | |||
| 1.3.6.1.4.1.20044.120.6.1.260.1 | Scalarpm800fr04CtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.120.6.1.261 | Nodepm800fr04CtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.120.6.1.261.1 | Scalarpm800fr04CtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.120.6.2 | Nodepm800fr04CtrlClient | |||
| 1.3.6.1.4.1.20044.120.6.2.16 | Tablepm800fr04CtrlaccessLoopTable | not-accessible | current | List of pm800fr04CtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.120.6.2.16.1 | Rowpm800fr04CtrlaccessLoopEntry | not-accessible | current | Row definition for the pm800fr04CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.120.6.2.16.1.1 | Columnpm800fr04CtrlaccessLoopIndex | read-only | current | Index definition for the pm800fr04CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.120.6.2.16.1.2 | Columnpm800fr04CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID enables the Client Facility Loopback, looping the client signal input on the output. <Help> This control enables the Client … |
| 1.3.6.1.4.1.20044.120.6.2.17 | Tablepm800fr04CtrlclientLoopToLineTable | not-accessible | current | List of pm800fr04CtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.120.6.2.17.1 | Rowpm800fr04CtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm800fr04CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.120.6.2.17.1.1 | Columnpm800fr04CtrlclientLoopToLineIndex | read-only | current | Index definition for the pm800fr04CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.120.6.2.17.1.2 | Columnpm800fr04CtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID enables the Client Terminal Loopback, looping the client output signal on the input. <Help> This control enables the Client … |
| 1.3.6.1.4.1.20044.120.6.2.21 | Tablepm800fr04CtrlcsfUpInsTable | not-accessible | current | List of pm800fr04CtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.120.6.2.21.1 | Rowpm800fr04CtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm800fr04CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.120.6.2.21.1.1 | Columnpm800fr04CtrlcsfUpInsIndex | read-only | current | Index definition for the pm800fr04CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.120.6.2.21.1.2 | Columnpm800fr04CtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.120.6.2.22 | Tablepm800fr04CtrlcaisDwInsTable | not-accessible | current | List of pm800fr04CtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.120.6.2.22.1 | Rowpm800fr04CtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm800fr04CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.120.6.2.22.1.1 | Columnpm800fr04CtrlcaisDwInsIndex | read-only | current | Index definition for the pm800fr04CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.120.6.2.22.1.2 | Columnpm800fr04CtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.120.6.2.262 | Tablepm800fr04CtrlclientResetAllCountTable | not-accessible | current | List of pm800fr04CtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.120.6.2.262.1 | Rowpm800fr04CtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm800fr04CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.120.6.2.262.1.1 | Columnpm800fr04CtrlclientResetAllCountIndex | read-only | current | Index definition for the pm800fr04CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.120.6.2.262.1.2 | Columnpm800fr04CtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.120.6.3 | Nodepm800fr04CtrlLine | |||
| 1.3.6.1.4.1.20044.120.6.3.64 | Tablepm800fr04CtrlcommAccessLoopTable | not-accessible | current | List of pm800fr04CtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.120.6.3.64.1 | Rowpm800fr04CtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm800fr04CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.120.6.3.64.1.1 | Columnpm800fr04CtrlcommAccessLoopIndex | read-only | current | Index definition for the pm800fr04CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.120.6.3.64.1.2 | Columnpm800fr04CtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, enables the Line Terminal loopback, looping the line output signal on the input. <Help> This control enables the Line Termina… |
| 1.3.6.1.4.1.20044.120.6.3.66 | Tablepm800fr04CtrllineLoopTable | not-accessible | current | List of pm800fr04CtrllineLoop Article |
| 1.3.6.1.4.1.20044.120.6.3.66.1 | Rowpm800fr04CtrllineLoopEntry | not-accessible | current | Row definition for the pm800fr04CtrllineLoop table |
| 1.3.6.1.4.1.20044.120.6.3.66.1.1 | Columnpm800fr04CtrllineLoopIndex | read-only | current | Index definition for the pm800fr04CtrllineLoop table |
| 1.3.6.1.4.1.20044.120.6.3.66.1.2 | Columnpm800fr04CtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID enables the Line Facility Loopback mode, looping the line input signal on the output. The Upstream part of the module is timed… |
| 1.3.6.1.4.1.20044.120.6.3.263 | Tablepm800fr04CtrllineResetAllCountTable | not-accessible | current | List of pm800fr04CtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.120.6.3.263.1 | Rowpm800fr04CtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm800fr04CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.120.6.3.263.1.1 | Columnpm800fr04CtrllineResetAllCountIndex | read-only | current | Index definition for the pm800fr04CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.120.6.3.263.1.2 | Columnpm800fr04CtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.120.7 | Nodepm800fr04ri | |||
| 1.3.6.1.4.1.20044.120.7.1 | Nodepm800fr04riTable | |||
| 1.3.6.1.4.1.20044.120.7.1.1 | Tablepm800fr04RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.120.7.1.1.1 | Rowpm800fr04RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.120.7.1.1.1.1 | Columnpm800fr04RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.120.7.1.1.1.2 | Columnpm800fr04Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.120.7.1.2 | Tablepm800fr04RinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.120.7.1.2.1 | Rowpm800fr04RinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.120.7.1.2.1.1 | Columnpm800fr04RinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.120.7.1.2.1.2 | Columnpm800fr04RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.120.7.2 | Scalarpm800fr04RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.120.7.3 | Scalarpm800fr04RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.120.7.4 | Scalarpm800fr04RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.120.7.5 | Scalarpm800fr04RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.120.7.6 | Scalarpm800fr04RinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.120.8 | Nodepm800fr04download | |||
| 1.3.6.1.4.1.20044.120.8.1 | Nodepm800fr04DwlOther | |||
| 1.3.6.1.4.1.20044.120.8.1.0 | Nodepm800fr04DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.120.8.1.0.1 | Scalarpm800fr04DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.120.8.1.0.2 | Scalarpm800fr04DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.120.8.1.1 | Nodepm800fr04DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.120.8.1.1.1 | Scalarpm800fr04DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.120.8.1.1.2 | Scalarpm800fr04DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.120.8.1.1.5 | Scalarpm800fr04DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.120.8.1.1.6 | Scalarpm800fr04DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.120.8.1.2 | Nodepm800fr04DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.120.8.1.2.1 | Scalarpm800fr04DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.120.8.1.2.2 | Scalarpm800fr04DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.120.8.1.2.3 | Scalarpm800fr04DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.120.8.1.2.4 | Scalarpm800fr04DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.120.8.1.2.5 | Scalarpm800fr04DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.120.8.1.2.6 | Scalarpm800fr04DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.120.8.1.2.7 | Scalarpm800fr04DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.120.8.1.2.8 | Scalarpm800fr04DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.120.8.2 | Nodepm800fr04DwlClient | |||
| 1.3.6.1.4.1.20044.120.8.3 | Nodepm800fr04DwlLine | |||
| 1.3.6.1.4.1.20044.120.9 | Nodepm800fr04Config | |||
| 1.3.6.1.4.1.20044.120.9.1 | Nodepm800fr04CfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.120.9.1.1 | Tablepm800fr04CfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.1.1.1 | Rowpm800fr04CfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.120.9.1.1.1.1 | Columnpm800fr04CfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.120.9.1.1.1.3 | Columnpm800fr04CfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.120.9.2 | Nodepm800fr04CfgStartup | |||
| 1.3.6.1.4.1.20044.120.9.2.1 | Tablepm800fr04CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.2.1.1 | Rowpm800fr04CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.120.9.2.1.1.1 | Columnpm800fr04CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.120.9.2.1.1.3 | Columnpm800fr04CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.120.9.2.1.1.4 | Columnpm800fr04CfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.120.9.2.1.1.14 | Columnpm800fr04CfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.120.9.2.2 | Tablepm800fr04CfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.2.2.1 | Rowpm800fr04CfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.120.9.2.2.1.1 | Columnpm800fr04CfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.120.9.2.2.1.3 | Columnpm800fr04CfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.120.9.2.2.1.4 | Columnpm800fr04CfgNetConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.120.9.2.2.1.14 | Columnpm800fr04CfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.120.9.2.3 | Tablepm800fr04CfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.2.3.1 | Rowpm800fr04CfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.120.9.2.3.1.1 | Columnpm800fr04CfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.120.9.2.3.1.3 | Columnpm800fr04CfgSystConfMsaLinePortn | read-write | current | Default settings on TRX :This register configures the default initialisation settings on TRX |
| 1.3.6.1.4.1.20044.120.9.2.3.1.6 | Columnpm800fr04CfgLineInputPowerHighAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.7 | Columnpm800fr04CfgLineInputPowerHighWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.8 | Columnpm800fr04CfgLineInputPowerLowWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.9 | Columnpm800fr04CfgLineInputPowerLowAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.10 | Columnpm800fr04CfgLineOutputPowerHighAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.11 | Columnpm800fr04CfgLineOutputPowerHighWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.12 | Columnpm800fr04CfgLineOutputPowerLowWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.13 | Columnpm800fr04CfgLineOutputPowerLowAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.2.3.1.14 | Columnpm800fr04CfgLineLossOfSignalPortn | read-write | current | Default settings on Los threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.120.9.3 | Nodepm800fr04CfgLabels | |||
| 1.3.6.1.4.1.20044.120.9.4 | Nodepm800fr04CfgStartuptlh | |||
| 1.3.6.1.4.1.20044.120.9.4.1 | Tablepm800fr04CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.4.1.1 | Rowpm800fr04CfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.120.9.4.1.1.1 | Columnpm800fr04CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.120.9.4.1.1.6 | Columnpm800fr04CfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.120.9.4.1.1.7 | Columnpm800fr04CfgLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.120.9.4.1.1.8 | Columnpm800fr04CfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.120.9.4.1.1.9 | Columnpm800fr04CfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.120.9.4.1.1.10 | Columnpm800fr04CfgTxLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.120.9.4.1.1.11 | Columnpm800fr04CfgLineSpectralBandwidthPortn | read-only | current | Default Line Spectral Bandwidth :This OID displays the line signal spectral bandwidth (Ghz) |
| 1.3.6.1.4.1.20044.120.9.5 | Nodepm800fr04CfgOther | |||
| 1.3.6.1.4.1.20044.120.9.5.1 | Nodepm800fr04tablemoduleOther | |||
| 1.3.6.1.4.1.20044.120.9.5.1.2 | Scalarpm800fr04CfgclientMode | read-write | deprecated | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.120.9.5.1.5 | Scalarpm800fr04CfgmoduleMode | read-write | current | Default settings on Module :This register selects the configuration mode of the module <Event> ObjectClearHistoPerf |
| 1.3.6.1.4.1.20044.120.9.6 | Nodepm800fr04CfgLabelsClient | |||
| 1.3.6.1.4.1.20044.120.9.6.1 | Tablepm800fr04CfgClientStartupLabelsTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.6.1.1 | Rowpm800fr04CfgClientStartupLabelsEntry | not-accessible | current | Row definition for the labelsClient table |
| 1.3.6.1.4.1.20044.120.9.6.1.1.1 | Columnpm800fr04CfgClientStartupLabelsIndex | read-only | current | Index definition for the clientStartupLabels table |
| 1.3.6.1.4.1.20044.120.9.6.1.1.3 | Columnpm800fr04CfgLabelClientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.120.9.7 | Nodepm800fr04CfgLabelsLine | |||
| 1.3.6.1.4.1.20044.120.9.7.1 | Tablepm800fr04CfgLineStartupLabelsTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.7.1.1 | Rowpm800fr04CfgLineStartupLabelsEntry | not-accessible | current | Row definition for the labelsLine table |
| 1.3.6.1.4.1.20044.120.9.7.1.1.1 | Columnpm800fr04CfgLineStartupLabelsIndex | read-only | current | Index definition for the lineStartupLabels table |
| 1.3.6.1.4.1.20044.120.9.7.1.1.3 | Columnpm800fr04CfgLabelLinePortn | read-write | current | Default settings on the label of the Lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.120.9.8 | Nodepm800fr04CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.120.9.8.1 | Tablepm800fr04CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.120.9.8.1.1 | Rowpm800fr04CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.120.9.8.1.1.1 | Columnpm800fr04CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.120.9.8.1.1.3 | Columnpm800fr04CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.120.9.8.1.1.4 | Columnpm800fr04CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.120.9.8.1.1.5 | Columnpm800fr04CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.120.9.8.1.1.6 | Columnpm800fr04CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.120.9.8.1.1.7 | Columnpm800fr04CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.120.9.257 | Scalarpm800fr04CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.120.10 | Nodepm800fr04traps | |||
| 1.3.6.1.4.1.20044.120.10.2 | Scalarpm800fr04trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.120.10.3 | Scalarpm800fr04trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.120.10.4 | Scalarpm800fr04trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.120.10.30 | Notificationpm800fr04LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.120.10.31 | Notificationpm800fr04LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.120.10.32 | Notificationpm800fr04LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.120.10.33 | Notificationpm800fr04LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.120.10.34 | Notificationpm800fr04LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.120.10.35 | Notificationpm800fr04LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.120.10.40 | Notificationpm800fr04ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.120.10.41 | Notificationpm800fr04ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.120.10.42 | Notificationpm800fr04ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.120.10.43 | Notificationpm800fr04ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.120.10.44 | Notificationpm800fr04ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.120.10.45 | Notificationpm800fr04ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.120.10.50 | Notificationpm800fr04PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.120.10.51 | Notificationpm800fr04PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.120.11 | Nodepm800fr04Monitoring | |||
| 1.3.6.1.4.1.20044.120.11.1 | Nodepm800fr04MonOther | |||
| 1.3.6.1.4.1.20044.120.11.1.3 | Nodepm800fr04MonRmon | |||
| 1.3.6.1.4.1.20044.120.11.2 | Nodepm800fr04MonClient | |||
| 1.3.6.1.4.1.20044.120.11.2.4 | Nodepm800fr04MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.120.11.2.4.16 | Tablepm800fr04MonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.16.1 | Rowpm800fr04MonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.16.1.1 | Columnpm800fr04MonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.16.1.2 | Columnpm800fr04MonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.120.11.2.4.16.1.3 | Columnpm800fr04MonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.16.1.4 | Columnpm800fr04MonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.48 | Tablepm800fr04MonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.48.1 | Rowpm800fr04MonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.48.1.1 | Columnpm800fr04MonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.48.1.2 | Columnpm800fr04MonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.120.11.2.4.48.1.3 | Columnpm800fr04MonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.48.1.4 | Columnpm800fr04MonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.80 | Tablepm800fr04MonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.80.1 | Rowpm800fr04MonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.80.1.1 | Columnpm800fr04MonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.80.1.2 | Columnpm800fr04MonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.120.11.2.4.80.1.3 | Columnpm800fr04MonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.80.1.4 | Columnpm800fr04MonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.112 | Tablepm800fr04MonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.112.1 | Rowpm800fr04MonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.112.1.1 | Columnpm800fr04MonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.112.1.2 | Columnpm800fr04MonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.120.11.2.4.112.1.3 | Columnpm800fr04MonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.112.1.4 | Columnpm800fr04MonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.144 | Tablepm800fr04MonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.144.1 | Rowpm800fr04MonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.144.1.1 | Columnpm800fr04MonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.144.1.2 | Columnpm800fr04MonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.120.11.2.4.144.1.3 | Columnpm800fr04MonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.144.1.4 | Columnpm800fr04MonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.176 | Tablepm800fr04MonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.176.1 | Rowpm800fr04MonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.176.1.1 | Columnpm800fr04MonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.176.1.2 | Columnpm800fr04MonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.120.11.2.4.176.1.3 | Columnpm800fr04MonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.176.1.4 | Columnpm800fr04MonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.304 | Tablepm800fr04MonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.304.1 | Rowpm800fr04MonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.304.1.1 | Columnpm800fr04MonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.304.1.2 | Columnpm800fr04MonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.120.11.2.4.304.1.3 | Columnpm800fr04MonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.304.1.4 | Columnpm800fr04MonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.336 | Tablepm800fr04MonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pm800fr04MonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.336.1 | Rowpm800fr04MonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pm800fr04MonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.336.1.1 | Columnpm800fr04MonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pm800fr04MonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.120.11.2.4.336.1.2 | Columnpm800fr04MonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.120.11.2.4.336.1.3 | Columnpm800fr04MonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.336.1.4 | Columnpm800fr04MonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.400 | Tablepm800fr04MondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.400.1 | Rowpm800fr04MondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.400.1.1 | Columnpm800fr04MondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.400.1.2 | Columnpm800fr04MondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.120.11.2.4.400.1.3 | Columnpm800fr04MondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.400.1.4 | Columnpm800fr04MondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.432 | Tablepm800fr04MondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.432.1 | Rowpm800fr04MondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.432.1.1 | Columnpm800fr04MondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.432.1.2 | Columnpm800fr04MondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.120.11.2.4.432.1.3 | Columnpm800fr04MondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.432.1.4 | Columnpm800fr04MondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.464 | Tablepm800fr04MondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.464.1 | Rowpm800fr04MondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.464.1.1 | Columnpm800fr04MondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.464.1.2 | Columnpm800fr04MondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.120.11.2.4.464.1.3 | Columnpm800fr04MondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.464.1.4 | Columnpm800fr04MondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.496 | Tablepm800fr04MondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.496.1 | Rowpm800fr04MondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.496.1.1 | Columnpm800fr04MondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.496.1.2 | Columnpm800fr04MondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.120.11.2.4.496.1.3 | Columnpm800fr04MondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.496.1.4 | Columnpm800fr04MondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.528 | Tablepm800fr04MondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.528.1 | Rowpm800fr04MondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.528.1.1 | Columnpm800fr04MondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.528.1.2 | Columnpm800fr04MondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.120.11.2.4.528.1.3 | Columnpm800fr04MondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.528.1.4 | Columnpm800fr04MondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.560 | Tablepm800fr04MondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.560.1 | Rowpm800fr04MondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.560.1.1 | Columnpm800fr04MondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.560.1.2 | Columnpm800fr04MondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.120.11.2.4.560.1.3 | Columnpm800fr04MondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.560.1.4 | Columnpm800fr04MondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.688 | Tablepm800fr04MondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.688.1 | Rowpm800fr04MondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.688.1.1 | Columnpm800fr04MondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.688.1.2 | Columnpm800fr04MondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.120.11.2.4.688.1.3 | Columnpm800fr04MondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.688.1.4 | Columnpm800fr04MondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.720 | Tablepm800fr04MondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pm800fr04MondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.120.11.2.4.720.1 | Rowpm800fr04MondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm800fr04MondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.720.1.1 | Columnpm800fr04MondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pm800fr04MondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.120.11.2.4.720.1.2 | Columnpm800fr04MondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.120.11.2.4.720.1.3 | Columnpm800fr04MondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.120.11.2.4.720.1.4 | Columnpm800fr04MondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.120.11.5 | Nodepm800fr04MonPerfOther | |||
| 1.3.6.1.4.1.20044.120.11.5.1 | Nodepm800fr04MonPerfSync | |||
| 1.3.6.1.4.1.20044.120.11.5.1.257 | Scalarpm800fr04PerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.120.11.5.1.259 | Scalarpm800fr04Perf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.120.11.5.1.260 | Scalarpm800fr04Perf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.120.11.5.2 | Nodepm800fr04MonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.120.11.5.2.1 | Scalarpm800fr04Perf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.120.11.5.2.2 | Scalarpm800fr04Perf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.120.11.5.2.5 | Scalarpm800fr04Perf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.120.11.5.2.6 | Scalarpm800fr04Perf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.120.11.5.2.7 | Scalarpm800fr04PerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.120.11.5.2.8 | Scalarpm800fr04PerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.120.11.6 | Nodepm800fr04MonPerfClient | |||
| 1.3.6.1.4.1.20044.120.11.6.16 | Tablepm800fr04PerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pm800fr04PerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.120.11.6.16.1 | Rowpm800fr04PerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.6.16.1.1 | Columnpm800fr04PerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.6.16.1.2 | Columnpm800fr04PerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.16.1.3 | Columnpm800fr04PerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.16.1.4 | Columnpm800fr04PerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.16.1.5 | Columnpm800fr04PerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.16.1.6 | Columnpm800fr04PerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.16.1.7 | Columnpm800fr04PerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.16.1.8 | Columnpm800fr04PerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.16.1.9 | Columnpm800fr04PerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.16.1.10 | Columnpm800fr04PerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.16.1.11 | Columnpm800fr04PerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.48 | Tablepm800fr04PerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.6.48.1 | Rowpm800fr04PerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.48.1.1 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.48.1.2 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.48.1.3 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.48.1.4 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.48.1.5 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.48.1.6 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.48.1.7 | Columnpm800fr04PerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.48.1.8 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.48.1.9 | Columnpm800fr04PerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.48.1.10 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.48.1.11 | Columnpm800fr04PerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.80 | Tablepm800fr04PerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pm800fr04PerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.120.11.6.80.1 | Rowpm800fr04PerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.6.80.1.1 | Columnpm800fr04PerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.6.80.1.2 | Columnpm800fr04PerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.80.1.3 | Columnpm800fr04PerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.80.1.4 | Columnpm800fr04PerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.80.1.5 | Columnpm800fr04PerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.80.1.6 | Columnpm800fr04PerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.80.1.7 | Columnpm800fr04PerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.80.1.8 | Columnpm800fr04PerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.80.1.9 | Columnpm800fr04PerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.80.1.10 | Columnpm800fr04PerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.80.1.11 | Columnpm800fr04PerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.112 | Tablepm800fr04PerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.6.112.1 | Rowpm800fr04PerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.112.1.1 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.112.1.2 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.112.1.3 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.112.1.4 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.112.1.5 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.112.1.6 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.112.1.7 | Columnpm800fr04PerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.112.1.8 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.112.1.9 | Columnpm800fr04PerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.112.1.10 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.112.1.11 | Columnpm800fr04PerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.144 | Tablepm800fr04PerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pm800fr04PerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.120.11.6.144.1 | Rowpm800fr04PerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.6.144.1.1 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.6.144.1.2 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.144.1.3 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.144.1.4 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.144.1.5 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.144.1.6 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.144.1.7 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.144.1.8 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.144.1.9 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.144.1.10 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.144.1.11 | Columnpm800fr04PerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.176 | Tablepm800fr04PerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.6.176.1 | Rowpm800fr04PerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.176.1.1 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.176.1.2 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.176.1.3 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.176.1.4 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.176.1.5 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.176.1.6 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.176.1.7 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.176.1.8 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.176.1.9 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.176.1.10 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.176.1.11 | Columnpm800fr04PerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.208 | Tablepm800fr04PerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pm800fr04PerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.120.11.6.208.1 | Rowpm800fr04PerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.6.208.1.1 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.6.208.1.2 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.208.1.3 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.208.1.4 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.208.1.5 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.208.1.6 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.208.1.7 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.208.1.8 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.208.1.9 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.208.1.10 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.208.1.11 | Columnpm800fr04PerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.240 | Tablepm800fr04PerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.6.240.1 | Rowpm800fr04PerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.240.1.1 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.240.1.2 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.240.1.3 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.6.240.1.4 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.240.1.5 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.240.1.6 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.240.1.7 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.240.1.8 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.240.1.9 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.240.1.10 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.240.1.11 | Columnpm800fr04PerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.6.848 | Tablepm800fr04PerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm800fr04PerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.120.11.6.848.1 | Rowpm800fr04PerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm800fr04PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.6.848.1.1 | Columnpm800fr04PerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm800fr04PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.6.848.1.4 | Columnpm800fr04perfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.848.1.5 | Columnpm800fr04perfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.848.1.6 | Columnpm800fr04perfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.848.1.7 | Columnpm800fr04perfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.120.11.6.848.1.28 | Columnpm800fr04perfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.848.1.29 | Columnpm800fr04perfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.848.1.30 | Columnpm800fr04perfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.848.1.31 | Columnpm800fr04perfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.120.11.6.880 | Tablepm800fr04PerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.6.880.1 | Rowpm800fr04PerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.880.1.1 | Columnpm800fr04PerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.880.1.4 | Columnpm800fr04perfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.880.1.5 | Columnpm800fr04perfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.880.1.6 | Columnpm800fr04perfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.880.1.7 | Columnpm800fr04perfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.120.11.6.880.1.28 | Columnpm800fr04perfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.880.1.29 | Columnpm800fr04perfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.880.1.30 | Columnpm800fr04perfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.880.1.31 | Columnpm800fr04perfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.120.11.6.912 | Tablepm800fr04PerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm800fr04PerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.120.11.6.912.1 | Rowpm800fr04PerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm800fr04PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.6.912.1.1 | Columnpm800fr04PerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm800fr04PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.6.912.1.4 | Columnpm800fr04perfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.912.1.5 | Columnpm800fr04perfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.912.1.6 | Columnpm800fr04perfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.912.1.7 | Columnpm800fr04perfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.120.11.6.912.1.28 | Columnpm800fr04perfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.912.1.29 | Columnpm800fr04perfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.912.1.30 | Columnpm800fr04perfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.912.1.31 | Columnpm800fr04perfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.120.11.6.944 | Tablepm800fr04PerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.6.944.1 | Rowpm800fr04PerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.944.1.1 | Columnpm800fr04PerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.6.944.1.4 | Columnpm800fr04perfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.944.1.5 | Columnpm800fr04perfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.944.1.6 | Columnpm800fr04perfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.944.1.7 | Columnpm800fr04perfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.120.11.6.944.1.28 | Columnpm800fr04perfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.944.1.29 | Columnpm800fr04perfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.120.11.6.944.1.30 | Columnpm800fr04perfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.120.11.6.944.1.31 | Columnpm800fr04perfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.120.11.7 | Nodepm800fr04MonPerfLine | |||
| 1.3.6.1.4.1.20044.120.11.7.336 | Tablepm800fr04PerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pm800fr04PerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.120.11.7.336.1 | Rowpm800fr04PerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.7.336.1.1 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.7.336.1.2 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.336.1.3 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.336.1.4 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.336.1.5 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.336.1.6 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.336.1.7 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.336.1.8 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.336.1.9 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.336.1.10 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.336.1.11 | Columnpm800fr04PerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.337 | Tablepm800fr04PerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.7.337.1 | Rowpm800fr04PerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.337.1.1 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.337.1.2 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.337.1.3 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.337.1.4 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.337.1.5 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.337.1.6 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.337.1.7 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.337.1.8 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.337.1.9 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.337.1.10 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.337.1.11 | Columnpm800fr04PerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.338 | Tablepm800fr04PerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pm800fr04PerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.120.11.7.338.1 | Rowpm800fr04PerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.7.338.1.1 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.7.338.1.2 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.338.1.3 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.338.1.4 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.338.1.5 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.338.1.6 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.338.1.7 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.338.1.8 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.338.1.9 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.338.1.10 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.338.1.11 | Columnpm800fr04PerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.339 | Tablepm800fr04PerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.7.339.1 | Rowpm800fr04PerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.339.1.1 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.339.1.2 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.339.1.3 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.339.1.4 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.339.1.5 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.339.1.6 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.339.1.7 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.339.1.8 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.339.1.9 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.339.1.10 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.339.1.11 | Columnpm800fr04PerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.352 | Tablepm800fr04PerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pm800fr04PerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.120.11.7.352.1 | Rowpm800fr04PerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.7.352.1.1 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.120.11.7.352.1.2 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.352.1.3 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.352.1.4 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.352.1.5 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.352.1.6 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.352.1.7 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.353 | Tablepm800fr04PerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.7.353.1 | Rowpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.353.1.1 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.353.1.2 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.353.1.3 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.353.1.4 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.353.1.5 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.353.1.6 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.353.1.7 | Columnpm800fr04PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.354 | Tablepm800fr04PerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pm800fr04PerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.120.11.7.354.1 | Rowpm800fr04PerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pm800fr04PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.7.354.1.1 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pm800fr04PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.120.11.7.354.1.2 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.354.1.3 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.354.1.4 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.354.1.5 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.354.1.6 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.354.1.7 | Columnpm800fr04PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.355 | Tablepm800fr04PerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pm800fr04PerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.120.11.7.355.1 | Rowpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm800fr04PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.355.1.1 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm800fr04PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.120.11.7.355.1.2 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.355.1.3 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.120.11.7.355.1.4 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.355.1.5 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.120.11.7.355.1.6 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.120.11.7.355.1.7 | Columnpm800fr04PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm800fr04DccMode | INTEGER { dccOff(0), dccOn(1) } | current | Mode for DCC |
| Pm800fr04OrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm800fr04OtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm800fr04OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50), otxgrid25(25) } | current | Different grids on OTX-TLH on client and line ports |