EKINOPS-PmDGE-MIB
139 objects
MIB for the Ekinops Pmdge hardware.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.56 | Identitymodulepmdge | MIB for the Ekinops Pmdge hardware. | ||
| 1.3.6.1.4.1.20044.56.2 | Nodepmdgealarms | |||
| 1.3.6.1.4.1.20044.56.2.1 | NodepmdgeAlmOther | |||
| 1.3.6.1.4.1.20044.56.2.1.1 | NodepmdgeAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.56.2.1.1.17 | NodepmdgeAlmswitchDegrade | |||
| 1.3.6.1.4.1.20044.56.2.1.1.17.2 | ScalarpmdgeAlmSwitchTempHighDeg | read-only | current | Equalizer Temperature High Warning :Warning indicating that the temperature of the Switch in the module is higher than the warning threshold value. <Help> This… |
| 1.3.6.1.4.1.20044.56.2.1.2 | NodepmdgeAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.56.2.1.2.16 | NodepmdgeAlmswitchAlarms | |||
| 1.3.6.1.4.1.20044.56.2.1.2.16.2 | ScalarpmdgeAlmSwitchTempHighAla | read-only | current | Equalizer Temperature High Alarm :Alarm indicating that the temperature of the Switch in the module is higher than the alarm threshold value <Help> This Alarm … |
| 1.3.6.1.4.1.20044.56.2.1.2.66 | NodepmdgeAlmmoduleStatus | |||
| 1.3.6.1.4.1.20044.56.2.1.2.66.1 | ScalarpmdgeAlmColdReset | read-only | current | Previous Cold Reset : <Help> This status indicates that the previous reset was a Cold Reset. <Condtype> COLD_RESET <Probcause> other (1) <Alarmtype> other (1) … |
| 1.3.6.1.4.1.20044.56.2.1.2.66.2 | ScalarpmdgeAlmWarmReset | read-only | current | Previous Warm Reset : <Help> This status indicates that the previous reset was a Warm Reset. <Condtype> WARM_RESET <Probcause> other (1) <Alarmtype> other (1) … |
| 1.3.6.1.4.1.20044.56.2.1.2.66.3 | ScalarpmdgeAlmHotReset | read-only | current | Previous Hot Reset : <Help> This status indicates that the previous reset was a Hot Reset. <Condtype> HOT_RESET <Probcause> other (1) <Alarmtype> other (1) <Po… |
| 1.3.6.1.4.1.20044.56.2.1.2.66.5 | ScalarpmdgeAlmSwitchNotReady | read-only | current | Equalizer Not Ready :This OID indicates the switch is not operational. <Help> This status indicates if the Switch of the module has been correctly initialized … |
| 1.3.6.1.4.1.20044.56.2.1.2.67 | NodepmdgeAlmmoduleAlarms | |||
| 1.3.6.1.4.1.20044.56.2.1.2.67.2 | ScalarpmdgeAlmModuleTempHighAla | read-only | current | Module Temperature High Alarm :Alarm indicating that the temperature of the module is higher than the alarm threshold value <Help> This Alarm indicates if the … |
| 1.3.6.1.4.1.20044.56.2.1.2.67.4 | ScalarpmdgeAlmCaseTempHighAla | read-only | current | Case Temperature High Alarm :Alarm indicating that the temperature of the case is higher than the alarm threshold value <Help> This Alarm indicates if the temp… |
| 1.3.6.1.4.1.20044.56.2.1.2.68 | NodepmdgeAlmmoduleDegrad | |||
| 1.3.6.1.4.1.20044.56.2.1.2.68.2 | ScalarpmdgeAlmModuleTempHighDeg | read-only | current | Module Temperature High Warning :Alarm indicating that the temperature of the module is higher than the warning threshold value <Help> This Warning indicates i… |
| 1.3.6.1.4.1.20044.56.2.1.2.68.4 | ScalarpmdgeAlmCaseTempHighDeg | read-only | current | Case Temperature High Warning :Alarm indicating that the temperature of the case is higher than the warning threshold value <Help> This Warning indicates if th… |
| 1.3.6.1.4.1.20044.56.2.1.3 | NodepmdgeAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.56.2.1.3.0 | NodepmdgeAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.56.2.1.3.0.1 | ScalarpmdgeAlmInServiceNotReady | read-only | current | Building Waveplan :This OID is a status indicating that the switch is currently setting a new waveplan (used plan) <Help> This status indicates that the module… |
| 1.3.6.1.4.1.20044.56.2.1.3.0.9 | ScalarpmdgeAlmModuleGlobFailure | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MODULE_GLOB_FAILURE <Probcause> equipmentMalfunction (16) <Alarmty… |
| 1.3.6.1.4.1.20044.56.2.1.3.0.15 | ScalarpmdgeAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.56.2.1.3.0.16 | ScalarpmdgeAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.56.2.1.3.7 | NodepmdgeAlmsynthAlm7 | |||
| 1.3.6.1.4.1.20044.56.2.1.3.7.2 | ScalarpmdgeAlmInitNotCompl | read-only | current | Equalizer Not Ready :This OID indicates the switch is not operational. <Help> This status indicates if the switch has been correctly initialized <Condtype> INI… |
| 1.3.6.1.4.1.20044.56.2.1.3.7.9 | ScalarpmdgeAlmSwitchDegrade | read-only | current | Warning On Equalizer :This OID indicates a warning is present coming out of the switch <Help> This alarm indicates if a warning has been detected on the switch… |
| 1.3.6.1.4.1.20044.56.2.1.3.7.10 | ScalarpmdgeAlmSwitchAlm | read-only | current | Alarm On Equalizer :This OID indicates an alarm is present coming out of the switch <Help> This alarm indicates if an Alarm has been detected on the switch <Co… |
| 1.3.6.1.4.1.20044.56.3 | Nodepmdgemeasures | |||
| 1.3.6.1.4.1.20044.56.3.1 | NodepmdgeMesrOther | |||
| 1.3.6.1.4.1.20044.56.3.1.16 | ScalarpmdgeMesrswitchTemp | read-only | current | Equalizer Temperature :This OID gives the temperature value of the switch in the module (Temperature = AV/256) (Unit = C) <Help> This measure gives the tempera… |
| 1.3.6.1.4.1.20044.56.3.1.64 | ScalarpmdgeMesrmoduleTemp | read-only | current | Module Temperature :This OID gives the temperature value of the module (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature value of the… |
| 1.3.6.1.4.1.20044.56.3.1.65 | ScalarpmdgeMesrcaseTemp | read-only | current | Case Temperature :This OID gives the temperature value of the case of the module (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature va… |
| 1.3.6.1.4.1.20044.56.6 | NodepmdgecontrolsWrite | |||
| 1.3.6.1.4.1.20044.56.6.1 | NodepmdgeCtrlOther | |||
| 1.3.6.1.4.1.20044.56.6.1.0 | NodepmdgeCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.56.6.1.0.1 | ScalarpmdgeCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.56.6.1.0.9 | ScalarpmdgeCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.56.6.1.0.13 | ScalarpmdgeCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.56.6.1.4 | NodepmdgeCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.56.6.1.4.1 | ScalarpmdgeCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM |
| 1.3.6.1.4.1.20044.56.6.1.4.2 | ScalarpmdgeCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM |
| 1.3.6.1.4.1.20044.56.6.1.5 | NodepmdgeCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.56.6.1.5.2 | ScalarpmdgeCtrlColdReset | read-write | current | Software Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on… |
| 1.3.6.1.4.1.20044.56.6.1.5.3 | ScalarpmdgeCtrlWarmReset | read-write | current | Software Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remain… |
| 1.3.6.1.4.1.20044.56.6.1.16 | NodepmdgeCtrlswitchCtrl | |||
| 1.3.6.1.4.1.20044.56.6.1.16.1 | ScalarpmdgeCtrlAllChannelsHighLoss | read-write | current | Equalizer Shutdown :This OID , when set, puts all the waves on a high attenuation mode. <Help> This control sets the waves on a high attenuation mode |
| 1.3.6.1.4.1.20044.56.6.1.17 | ScalarpmdgeCtrlcraftSynch | read-write | current | Craft Synchro :This OID is used for internal purpose only |
| 1.3.6.1.4.1.20044.56.6.1.64 | NodepmdgeCtrlledTest | |||
| 1.3.6.1.4.1.20044.56.6.1.64.1 | ScalarpmdgeCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.56.6.1.64.2 | ScalarpmdgeCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.56.6.1.64.3 | ScalarpmdgeCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.56.6.1.65 | TablepmdgeCtrlwavePlanAssignmentsRefreshTable | not-accessible | current | List of pmdgeCtrlwavePlanAssignmentsRefresh Article |
| 1.3.6.1.4.1.20044.56.6.1.65.1 | RowpmdgeCtrlwavePlanAssignmentsRefreshEntry | not-accessible | current | Row definition for the pmdgeCtrlwavePlanAssignmentsRefresh table |
| 1.3.6.1.4.1.20044.56.6.1.65.1.1 | ColumnpmdgeCtrlwavePlanAssignmentsRefreshIndex | read-only | current | Index definition for the pmdgeCtrlwavePlanAssignmentsRefresh table |
| 1.3.6.1.4.1.20044.56.6.1.65.1.2 | ColumnpmdgeCtrlWaveStatusRefreshPortn | read-only | current | WaveStatus :This OID sets the waves status to ON or OFF inside the waveplan. |
| 1.3.6.1.4.1.20044.56.6.1.65.1.3 | ColumnpmdgeCtrlWaveNarrowingRefreshPortn | read-only | current | WaveNarrowing :This OID sets the wave narrowing value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.65.1.4 | ColumnpmdgeCtrlWaveCenterFrequencyRefreshPortn | read-only | current | WaveCenterFrequency :This OID sets the wave center frequency value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.65.1.5 | ColumnpmdgeCtrlWaveOOSRefreshPortn | read-only | current | WaveOOS :This OID sets the wave Out Of Service value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.65.1.6 | ColumnpmdgeCtrlWaveAttenuationRefreshPortn | read-only | current | WaveAttenuation :This OID sets the wave attenuation value inside the waveplan. |
| 1.3.6.1.4.1.20044.56.6.1.65.1.7 | ColumnpmdgeCtrlWaveItuRefreshPortn | read-only | current | WaveItu :This OID sets the wave channel number inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.65.1.8 | ColumnpmdgeCtrlWaveDegreeRefreshPortn | read-only | current | WaveDegree :This OID sets the degree assigned to the wave inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.65.1.16 | ColumnpmdgeCtrlUsageRefreshPortn | read-only | current | Wave Assignment :This OID gives the assignment of a wave for a given waveplan along with the full possible waveplan. |
| 1.3.6.1.4.1.20044.56.6.1.66 | TablepmdgeCtrlwavePlanAssignmentsWorkTable | not-accessible | current | List of pmdgeCtrlwavePlanAssignmentsWork Article |
| 1.3.6.1.4.1.20044.56.6.1.66.1 | RowpmdgeCtrlwavePlanAssignmentsWorkEntry | not-accessible | current | Row definition for the pmdgeCtrlwavePlanAssignmentsWork table |
| 1.3.6.1.4.1.20044.56.6.1.66.1.1 | ColumnpmdgeCtrlwavePlanAssignmentsWorkIndex | read-only | current | Index definition for the pmdgeCtrlwavePlanAssignmentsWork table |
| 1.3.6.1.4.1.20044.56.6.1.66.1.2 | ColumnpmdgeCtrlWaveStatusWorkPortn | read-write | current | WaveStatus :This OID sets the waves status to ON or OFF inside the waveplan. |
| 1.3.6.1.4.1.20044.56.6.1.66.1.3 | ColumnpmdgeCtrlWaveNarrowingWorkPortn | read-write | current | WaveNarrowing :This OID sets the wave narrowing value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.66.1.4 | ColumnpmdgeCtrlWaveCenterFrequencyWorkPortn | read-write | current | WaveCenterFrequency :This OID sets the wave center frequency value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.66.1.5 | ColumnpmdgeCtrlWaveOOSWorkPortn | read-write | current | WaveOOS :This OID sets the wave Out Of Service value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.66.1.6 | ColumnpmdgeCtrlWaveAttenuationWorkPortn | read-write | current | WaveAttenuation :This OID sets the wave attenuation value inside the waveplan. |
| 1.3.6.1.4.1.20044.56.6.1.66.1.7 | ColumnpmdgeCtrlWaveItuWorkPortn | read-only | current | WaveItu :This OID sets the wave channel number inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.66.1.8 | ColumnpmdgeCtrlWaveDegreeWorkPortn | read-write | current | WaveDegree :This OID sets the degree assigned to the wave inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.56.6.1.66.1.16 | ColumnpmdgeCtrlUsageWorkPortn | read-only | current | Wave Assignment :This OID gives the assignment of a wave for a given waveplan along with the full possible waveplan. |
| 1.3.6.1.4.1.20044.56.6.1.67 | ScalarpmdgeCtrlbuildFromMgntPlan | read-write | current | Build From MGNT :This OID builds a waveplan from the waveplans stored in the MGNT board. <Help> This control builds a waveplan from the waveplans stored in the… |
| 1.3.6.1.4.1.20044.56.6.1.68 | ScalarpmdgeCtrlloadToWorkplan | read-write | current | Display Waveplan :This OID displays in the user interface one of the following waveplan : In service Waveplan, Saved Waveplan 1, Saved Waveplan 2, Build from M… |
| 1.3.6.1.4.1.20044.56.6.1.69 | ScalarpmdgeCtrlsaveWorkPlanTo | read-write | current | Save Waveplan : This OID saves (in the Saved Waveplan 1 or Saved Waveplan 2) the waveplan built with the user interface. <Help> This control saves (in the Save… |
| 1.3.6.1.4.1.20044.56.6.1.70 | ScalarpmdgeCtrlloadPlanToUse | read-write | current | Set Waveplan In Service : This OID sets on the following waveplan In Service (Saved Waveplan 1, Saved Waveplan 2 or Displayed Waveplan). <Help> This control se… |
| 1.3.6.1.4.1.20044.56.6.1.71 | ScalarpmdgeCtrlrefreshWithPlan | read-write | current | Refresh User Interface :This OID refreshes the user interface with the information coming from the In service Waveplan, the Saved Waveplan 1 or the Saved Wavep… |
| 1.3.6.1.4.1.20044.56.6.1.72 | ScalarpmdgeCtrlsavePlanToFile | read-write | current | Export To File On MGNT :This OID exports the Displayed Waveplan to a file on the MGNT board. <Help> This control the Displayed waveplan to a file on the MGNT b… |
| 1.3.6.1.4.1.20044.56.6.1.73 | ScalarpmdgeCtrlloadPlanFromFile | read-write | current | Import From File On MGNT :This OID imports a waveplan from a file on the MGNT board to the Displayed Waveplan. <Help> This control imports a waveplan from a fi… |
| 1.3.6.1.4.1.20044.56.6.2 | NodepmdgeCtrlEqualizer | |||
| 1.3.6.1.4.1.20044.56.6.2.19 | TablepmdgeCtrlequTxCommonAttDegTable | not-accessible | current | List of pmdgeCtrlequTxCommonAttDeg Article |
| 1.3.6.1.4.1.20044.56.6.2.19.1 | RowpmdgeCtrlequTxCommonAttDegEntry | not-accessible | current | Row definition for the pmdgeCtrlequTxCommonAttDeg table |
| 1.3.6.1.4.1.20044.56.6.2.19.1.1 | ColumnpmdgeCtrlequTxCommonAttDegIndex | read-only | current | Index definition for the pmdgeCtrlequTxCommonAttDeg table |
| 1.3.6.1.4.1.20044.56.6.2.19.1.2 | ColumnpmdgeCtrlequTxCommonAttDegPortn | read-write | current | Equalizer Output Attenuation :This OID defines the line output attenuation. <Help> This OID defines the line output attenuation |
| 1.3.6.1.4.1.20044.56.6.2.44 | NodepmdgeCtrlapplyPlanUpdate | |||
| 1.3.6.1.4.1.20044.56.6.2.44.1 | ScalarpmdgeCtrlApply | read-write | current | Apply Update :This OID confirms the parameters selected for the waveplan modification |
| 1.3.6.1.4.1.20044.56.6.3 | NodepmdgeCtrlLine | |||
| 1.3.6.1.4.1.20044.56.7 | Nodepmdgeri | |||
| 1.3.6.1.4.1.20044.56.7.1 | NodepmdgeriTable | |||
| 1.3.6.1.4.1.20044.56.7.1.1 | TablepmdgeRinvPortTable | not-accessible | current | List of the Ports on the selected module |
| 1.3.6.1.4.1.20044.56.7.1.1.1 | RowpmdgeRinvPortEntry | not-accessible | current | Row definition for the Port table |
| 1.3.6.1.4.1.20044.56.7.1.1.1.1 | ColumnpmdgeRinvPortIndex | read-only | current | Index for Port table |
| 1.3.6.1.4.1.20044.56.7.1.1.1.2 | ColumnpmdgeRinvPort | read-only | current | Inventory for the Port: This OID contains the inventory for the Port |
| 1.3.6.1.4.1.20044.56.7.1.2 | TablepmdgeRinvLineTable | not-accessible | current | List of the Lines on the selected module |
| 1.3.6.1.4.1.20044.56.7.1.2.1 | RowpmdgeRinvLineEntry | not-accessible | current | Row definition for the Line table |
| 1.3.6.1.4.1.20044.56.7.1.2.1.1 | ColumnpmdgeRinvLineIndex | read-only | current | Index for Line table |
| 1.3.6.1.4.1.20044.56.7.1.2.1.2 | ColumnpmdgeRinvxfpLine | read-only | current | Inventory for the Line: This OID contains the inventory for the Line |
| 1.3.6.1.4.1.20044.56.7.2 | ScalarpmdgeRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.56.7.4 | ScalarpmdgeRinvHwPlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.56.7.5 | ScalarpmdgeRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.56.9 | NodepmdgeConfig | |||
| 1.3.6.1.4.1.20044.56.9.1 | NodepmdgeCfgLsd | |||
| 1.3.6.1.4.1.20044.56.9.1.1 | NodepmdgetableclientLsd | |||
| 1.3.6.1.4.1.20044.56.9.2 | NodepmdgeCfgStartup | |||
| 1.3.6.1.4.1.20044.56.9.2.1 | TablepmdgeCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.56.9.2.1.1 | RowpmdgeCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.56.9.2.1.1.1 | ColumnpmdgeCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.56.9.2.1.1.3 | ColumnpmdgeCfgLineaRxCommonAttDegPortn | read-write | current | Defaut setting on attenuation on Rx Express :This register selects the Rx attenuator value of the Express line on setup |
| 1.3.6.1.4.1.20044.56.9.2.2 | NodepmdgetablelineStartup | |||
| 1.3.6.1.4.1.20044.56.9.2.3 | NodepmdgetableclientsDge | |||
| 1.3.6.1.4.1.20044.56.9.2.4 | NodepmdgetablelinesDge | |||
| 1.3.6.1.4.1.20044.56.9.2.4.2 | ScalarpmdgeCfgequGridCurrent | read-write | current | Default setting of the grid :This register selects the configuration of the grid used on setup |
| 1.3.6.1.4.1.20044.56.9.2.5 | Nodepmdgetableother | |||
| 1.3.6.1.4.1.20044.56.9.2.5.2 | ScalarpmdgeCfgcomponentType | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.56.9.2.5.3 | ScalarpmdgeCfgmiscellaneous | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.56.9.2.5.4 | ScalarpmdgeCfgfirstChannel | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.56.9.2.5.5 | ScalarpmdgeCfglastChannel | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.56.9.2.5.6 | ScalarpmdgeCfggrid | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.56.9.3 | NodepmdgeCfgLabels | |||
| 1.3.6.1.4.1.20044.56.9.3.1 | TablepmdgeCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.56.9.3.1.1 | RowpmdgeCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.56.9.3.1.1.1 | ColumnpmdgeCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.56.9.3.1.1.3 | ColumnpmdgeCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.56.9.3.2 | TablepmdgeCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.56.9.3.2.1 | RowpmdgeCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.56.9.3.2.1.1 | ColumnpmdgeCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.56.9.3.2.1.3 | ColumnpmdgeCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.56.9.257 | ScalarpmdgeCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.56.10 | Nodepmdgetraps | |||
| 1.3.6.1.4.1.20044.56.10.4 | ScalarpmdgetrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.56.10.50 | NotificationpmdgePowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.56.10.51 | NotificationpmdgePowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PmdgeChannel | INTEGER { } | current | Channel selection on line ports |
| PmdgeGrid | INTEGER { dgegrid200(200), dgegrid100(100), dgegrid50(50) } | current | Different grids on line ports |
| PmdgePlanNumber | INTEGER { workingPlan(0), savedPlan1(1), savedPlan2(2), usedPlan(7) } | current | Different values for plans |