EKINOPS-PmPump3-MIB
175 objects
Creation
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.49 | Identitymodulepmpump3 | Creation | ||
| 1.3.6.1.4.1.20044.49.2 | Nodepmpump3alarms | |||
| 1.3.6.1.4.1.20044.49.2.1 | Nodepmpump3AlmOther | |||
| 1.3.6.1.4.1.20044.49.2.1.1 | Nodepmpump3AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.49.2.1.1.2 | Nodepmpump3AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.49.2.1.1.2.1 | Scalarpmpump3AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.49.2.1.1.2.2 | Scalarpmpump3AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.49.2.1.1.2.3 | Scalarpmpump3AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.49.2.1.1.75 | Nodepmpump3AlmpmWarnings | |||
| 1.3.6.1.4.1.20044.49.2.1.1.75.1 | Scalarpmpump3AlmTermpLowWarning | read-only | current | Module Temperature Low Warning :This OID indicates that the PM temperature if lower than the Warning threshold <Help> This warning indicates if the module temp… |
| 1.3.6.1.4.1.20044.49.2.1.1.75.2 | Scalarpmpump3AlmTempHighWarning | read-only | current | Module Temperature High Warning :This OID indicates that the PM temperature if higher than the Warning threshold <Help> This warning indicates if the module te… |
| 1.3.6.1.4.1.20044.49.2.1.2 | Nodepmpump3AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.49.2.1.2.74 | Nodepmpump3AlmpmAlarms | |||
| 1.3.6.1.4.1.20044.49.2.1.2.74.1 | Scalarpmpump3AlmTermpLowAlarm | read-only | current | Module Temperature Low Alarm :This OID indicates that the PM temperature if lower than the alarm threshold <Help> This alarm indicates if the module temperatur… |
| 1.3.6.1.4.1.20044.49.2.1.2.74.2 | Scalarpmpump3AlmTempHighAlarm | read-only | current | Module Temperature High Alarm :This OID indicates that the PM temperature is higher than the alarm threshold <Help> This alarm indicates if the module temperat… |
| 1.3.6.1.4.1.20044.49.2.1.3 | Nodepmpump3AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.49.2.1.3.0 | Nodepmpump3AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.49.2.1.3.0.9 | Scalarpmpump3AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.49.2.1.3.0.15 | Scalarpmpump3AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.49.2.1.3.0.16 | Scalarpmpump3AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.49.2.2 | Nodepmpump3AlmClient | |||
| 1.3.6.1.4.1.20044.49.2.2.1 | Nodepmpump3AlmClientNurg | |||
| 1.3.6.1.4.1.20044.49.2.2.1.17 | Nodepmpump3Almlaser1Warnings | |||
| 1.3.6.1.4.1.20044.49.2.2.1.17.1 | Scalarpmpump3AlmLaser1TempLowWarning | read-only | current | Booster / IL1 Temp Low Warning :This OID indicates that the pump temperature is lower than the warning threshold of the IL1 pump. <Help> This warning indicates… |
| 1.3.6.1.4.1.20044.49.2.2.1.17.2 | Scalarpmpump3AlmLaser1TempHighWarning | read-only | current | Booster / IL1 Temp High Warning :This OID indicates that the pump temperature is higher than the warning threshold of the IL1 pump. <Help> This warning indicat… |
| 1.3.6.1.4.1.20044.49.2.2.1.17.3 | Scalarpmpump3AlmLaser1VthLowWarning | read-only | current | Booster / IL1 Vth Low Warning :This OID indicates that the thermistor voltage is lower than the warning threshold of the IL1 pump. <Help> This warning indicate… |
| 1.3.6.1.4.1.20044.49.2.2.1.17.4 | Scalarpmpump3AlmLaser1VthHighWarning | read-only | current | Booster / IL1 Vth High Warning :This OID indicates that the thermistor voltage is higher than the warning threshold of the IL1 pump. <Help> This warning indica… |
| 1.3.6.1.4.1.20044.49.2.2.1.17.5 | Scalarpmpump3AlmLaser1OutputPwrLowWarning | read-only | current | Booster / IL1 Pwr Low Warning :This OID indicates that the Transmit Power is lower than the warning threshold of the IL1 pump. <Help> This warning indicates if… |
| 1.3.6.1.4.1.20044.49.2.2.1.17.6 | Scalarpmpump3AlmLaser1OutputPwrHighWarning | read-only | current | Booster / IL1 Pwr High Warning :This OID indicates that the Transmit Power is higher than the warning threshold of the IL1 pump. <Help> This warning indicates … |
| 1.3.6.1.4.1.20044.49.2.2.1.17.7 | Scalarpmpump3AlmLaser1BiasLowWarning | read-only | current | Booster / IL1 Bias Low Warning :This OID indicates that the Bias is lower than the warning threshold of the IL1 pump. <Help> This warning indicates if the IL1 … |
| 1.3.6.1.4.1.20044.49.2.2.1.17.8 | Scalarpmpump3AlmLaser1BiasHighWarning | read-only | current | Booster / IL1 Bias High Warning :This OID indicates that the Bias is higher than the warning threshold of the IL1 pump. <Help> This warning indicates if the IL… |
| 1.3.6.1.4.1.20044.49.2.2.2 | Nodepmpump3AlmClientUrg | |||
| 1.3.6.1.4.1.20044.49.2.2.2.16 | Nodepmpump3Almlaser1Alarms1 | |||
| 1.3.6.1.4.1.20044.49.2.2.2.16.1 | Scalarpmpump3AlmLaser1TempLowAlarm | read-only | current | Booster / IL1 Temp Low Alarm :This OID indicates that the pump temperature is lower than the alarm threshold of the IL1 pump. <Help> This alarm indicates if th… |
| 1.3.6.1.4.1.20044.49.2.2.2.16.2 | Scalarpmpump3AlmLaser1TempHighAlarm | read-only | current | Booster / IL1 Temp High Alarm :This OID indicates that the pump temperature is higher than the alarm threshold of the IL1 pump. <Help> This alarm indicates if … |
| 1.3.6.1.4.1.20044.49.2.2.2.16.3 | Scalarpmpump3AlmLaser1VthLowAlarm | read-only | current | Booster / IL1 Vth Low Alarm :This OID indicates that the thermistor voltage is lower than the alarm threshold of the IL1 pump. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.49.2.2.2.16.4 | Scalarpmpump3AlmLaser1VthHighAlarm | read-only | current | Booster / IL1 Vth High Alarm :This OID indicates that the thermistor voltage is higher than the alarm threshold of the IL1 pump. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.49.2.2.2.16.5 | Scalarpmpump3AlmLaser1OutputPwrLowAlarm | read-only | current | Booster / IL1 Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm threshold of the IL1 pump. <Help> This alarm indicates if the I… |
| 1.3.6.1.4.1.20044.49.2.2.2.16.6 | Scalarpmpump3AlmLaser1OutputPwrHighAlarm | read-only | current | Booster / IL1 Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm threshold of the IL1 pump. <Help> This alarm indicates if the… |
| 1.3.6.1.4.1.20044.49.2.2.2.16.7 | Scalarpmpump3AlmLaser1BiasLowAlarm | read-only | current | Booster / IL1 Bias Low Alarm :This OID indicates that the Bias is lower than the alarm threshold of the IL1 pump. <Help> This alarm indicates if the IL2 bias i… |
| 1.3.6.1.4.1.20044.49.2.2.2.16.8 | Scalarpmpump3AlmLaser1BiasHighAlarm | read-only | current | Booster / IL1 Bias High Alarm :This OID indicates that the Bias is higher than the alarm threshold of the IL1 pump. <Help> This alarm indicates if the IL2 bias… |
| 1.3.6.1.4.1.20044.49.2.2.3 | Nodepmpump3AlmClientCrit | |||
| 1.3.6.1.4.1.20044.49.2.2.3.8 | Nodepmpump3AlmsynthAlmLaser1 | |||
| 1.3.6.1.4.1.20044.49.2.2.3.8.2 | Scalarpmpump3AlmLaser1InitNotCompl | read-only | current | Booster / IL1 Pump Not Ready :This OID indicates that the IL1 pump is not operational. <Condtype> LASER1_INIT_NOT_COMPL <Probcause> other (1) <Alarmtype> other… |
| 1.3.6.1.4.1.20044.49.2.2.3.8.4 | Scalarpmpump3AlmLaser1HwFail | read-only | current | Booster / IL1 Pump HW Failure :This OID indicates a failure on IL1 pump, most probably caused by a HW issue <Condtype> LASER1_HW_FAIL <Probcause> equipmentMalf… |
| 1.3.6.1.4.1.20044.49.2.2.3.8.5 | Scalarpmpump3AlmLaser1TxOff | read-only | current | Booster / IL1 Pump Output Shutdown :This OID indicates the IL1 pump optical output power is on. <Help> This status indicates if the IL1 laser pump is ON or OFF… |
| 1.3.6.1.4.1.20044.49.2.2.3.8.6 | Scalarpmpump3AlmLaser1Oos | read-only | current | Booster / IL1 Pump In Service :This OID indicates that the IL1 pump is In Service (1) of Out or Service (2) <Help> This status indicates if the IL1 pump is in … |
| 1.3.6.1.4.1.20044.49.2.2.3.8.9 | Scalarpmpump3AlmLaser1Warning | read-only | current | Warning On Booster / IL1 Pump DDM :This OID indicates a warning is present coming out of IL1 pump DDM <Condtype> LASER1_WARNING <Probcause> equipmentMalfunctio… |
| 1.3.6.1.4.1.20044.49.2.2.3.8.10 | Scalarpmpump3AlmLaser1Alm | read-only | current | Alarm On Booster / IL1 Pump DDM :This OID indicates an alarm is present coming out of the IL1 pump DDM <Condtype> LASER1_ALM <Probcause> equipmentMalfunction (… |
| 1.3.6.1.4.1.20044.49.2.2.3.8.12 | Scalarpmpump3AlmLaser1Fail | read-only | current | Booster / IL1 Pump Failure :This OID indicates a failure on the pump <Condtype> LASER1_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (1… |
| 1.3.6.1.4.1.20044.49.2.2.3.9 | Nodepmpump3AlmsynthAlmLaser2 | |||
| 1.3.6.1.4.1.20044.49.2.2.3.9.2 | Scalarpmpump3AlmLaser2InitNotCompl | read-only | current | Pre-Amp / IL2 Pump Not Ready :This OID indicates that the IL2 pump is not operational. <Condtype> LASER2_INIT_NOT_COMPL <Probcause> other (1) <Alarmtype> other… |
| 1.3.6.1.4.1.20044.49.2.2.3.9.4 | Scalarpmpump3AlmLaser2HwFail | read-only | current | Pre-Amp / IL2 Pump HW Failure :This OID indicates a failure on IL2 pump, most probably caused by a HW issue <Condtype> LASER2_HW_FAIL <Probcause> equipmentMalf… |
| 1.3.6.1.4.1.20044.49.2.2.3.9.5 | Scalarpmpump3AlmLaser2TxOff | read-only | current | Pre-Amp / IL2 Pump Output Shutdown :This OID indicates the IL2 pump optical output power is on. <Help> This status indicates if the IL2 laser pump is ON or OFF… |
| 1.3.6.1.4.1.20044.49.2.2.3.9.6 | Scalarpmpump3AlmLaser2Oos | read-only | current | Pre-Amp / IL2 Pump In Service :This OID indicates that the IL2 pump is In Service (1) of Out or Service (2) <Help> This status indicates if the IL2 pump is in … |
| 1.3.6.1.4.1.20044.49.2.2.3.9.9 | Scalarpmpump3AlmLaser2Warning | read-only | current | Warning On Pre-Amp / IL2 Pump DDM :This OID indicates a warning is present coming out of the IL2 pump DDM <Condtype> LASER2_WARNING <Probcause> equipmentMalfun… |
| 1.3.6.1.4.1.20044.49.2.2.3.9.10 | Scalarpmpump3AlmLaser2Alm | read-only | current | Alarm On Pre-Amp / IL2 Pump DDM :This OID indicates an alarm is present coming out of IL2 pump DDM <Condtype> LASER2_ALM <Probcause> equipmentMalfunction (16) … |
| 1.3.6.1.4.1.20044.49.2.2.3.9.12 | Scalarpmpump3AlmLaser2Fail | read-only | current | Pre-Amp / IL2 Pump Failure :This OID indicates a failure on the pump <Condtype> LASER2_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (1… |
| 1.3.6.1.4.1.20044.49.2.2.3.19 | Nodepmpump3Almlaser1Alarms2 | |||
| 1.3.6.1.4.1.20044.49.2.2.3.19.1 | Scalarpmpump3AlmLaser1AlmCurrent | read-only | current | Booster / IL1 Current Alarm :This OID indicates that maximum current has reached the internal limitation <Help> This alarm indicates if the current has reached… |
| 1.3.6.1.4.1.20044.49.2.2.3.19.2 | Scalarpmpump3AlmLaser1AlmTemp | read-only | current | Booster / IL1 Temperature Alarm :This OID indicates that the temperature of the current driver has reached the internal limitation. <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.49.2.2.3.19.3 | Scalarpmpump3AlmLaser1AlmTecPower | read-only | current | Booster / IL1 TEC Pw :This OID indicates that the TEC power supply is in fail condition . <Help> This alarm indicates if the TEC power is in fail condition <Co… |
| 1.3.6.1.4.1.20044.49.2.2.3.19.4 | Scalarpmpump3AlmLaser1AlmTecDev | read-only | current | Booster / IL1 TEC Deviation :This OID indicates that the loop control of the TEC is in fail condition <Help> This alarm indicates if the loop control of the TE… |
| 1.3.6.1.4.1.20044.49.2.2.3.19.5 | Scalarpmpump3AlmLaser1OaDisconnectedLsd | read-only | current | Booster / IL1 Pump Link Disconnected :This OID indicates that the link betwenn the amplifier and the pump is open <Help> This alarm indicates that the OA or th… |
| 1.3.6.1.4.1.20044.49.2.2.3.19.6 | Scalarpmpump3AlmLaser1ExtLsd | read-only | current | Booster / IL1 Laser Shutdown :This OID indicates that the laser of the pump is shut down <Help> This status indicates that the laser of the pump is shut down <… |
| 1.3.6.1.4.1.20044.49.2.3 | Nodepmpump3AlmLine | |||
| 1.3.6.1.4.1.20044.49.2.3.1 | Nodepmpump3AlmLineNurg | |||
| 1.3.6.1.4.1.20044.49.2.3.1.25 | Nodepmpump3Almlaser2Warnings | |||
| 1.3.6.1.4.1.20044.49.2.3.1.25.1 | Scalarpmpump3AlmLaser2TempLowWarning | read-only | current | Pre-Amp / IL2 Temp Low Warning :This OID indicates that the Gain is lower than the Warning threshold of the IL1 Module <Help> This warning indicates if the IL2… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.2 | Scalarpmpump3AlmLaser2TempHighWarning | read-only | current | Pre-Amp / IL2 Temp High Warning :This OID indicates that the Gain is higher than the Warning threshold of the IL1 Module <Help> This warning indicates if the I… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.3 | Scalarpmpump3AlmLaser2VthLowWarning | read-only | current | Pre-Amp / IL2 Vth Low Warning :This OID indicates that the Receive Power is lower than the Warning threshold of the IL2 Optical Module <Help> This warning indi… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.4 | Scalarpmpump3AlmLaser2VthHighWarning | read-only | current | Pre-Amp / IL2 Vth High Warning :This OID indicates that the Receive Power is higher than the Warning threshold of the IL2 Optical Module <Help> This warning in… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.5 | Scalarpmpump3AlmLaser2OutputPwrLowWarning | read-only | current | Pre-Amp / IL2 Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning threshold of the IL1 Optical Module <Help> This warning ind… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.6 | Scalarpmpump3AlmLaser2OutputPwrHighWarning | read-only | current | Pre-Amp / IL2 Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning threshold of the IL1 Optical Module <Help> This warning i… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.7 | Scalarpmpump3AlmLaser2BiasLowWarning | read-only | current | Pre-Amp / IL2 Bias Low Warning :This OID indicates that the Bias is lower than the Warning threshold of the IL1 Optical Module <Help> This warning indicates if… |
| 1.3.6.1.4.1.20044.49.2.3.1.25.8 | Scalarpmpump3AlmLaser2BiasHighWarning | read-only | current | Pre-Amp / IL2 Bias High Warning :This OID indicates that the Bias is higher than the Warning threshold of the IL1 Optical Module <Help> This warning indicates … |
| 1.3.6.1.4.1.20044.49.2.3.2 | Nodepmpump3AlmLineUrg | |||
| 1.3.6.1.4.1.20044.49.2.3.2.24 | Nodepmpump3Almlaser2Alarms1 | |||
| 1.3.6.1.4.1.20044.49.2.3.2.24.1 | Scalarpmpump3AlmLaser2TempLowAlarm | read-only | current | Pre-Amp / IL2 Temp Low Alarm :This OID indicates that the Gain is lower than the alarm threshold of the IL1 Module <Help> This alarm indicates if the IL2 pump … |
| 1.3.6.1.4.1.20044.49.2.3.2.24.2 | Scalarpmpump3AlmLaser2TempHighAlarm | read-only | current | Pre-Amp / IL2 Temp High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the IL1 Module <Help> This alarm indicates if the IL2 pum… |
| 1.3.6.1.4.1.20044.49.2.3.2.24.3 | Scalarpmpump3AlmLaser2VthLowAlarm | read-only | current | Pre-Amp / IL2 Vth Low Alarm :This OID indicates that the Receive Power is lower than the alarm threshold of the IL2 Optical Module <Help> This alarm indicates … |
| 1.3.6.1.4.1.20044.49.2.3.2.24.4 | Scalarpmpump3AlmLaser2VthHighAlarm | read-only | current | Pre-Amp / IL2 Vth High Alarm :This OID indicates that the Receive Power is higher than the alarm threshold of the IL2 Optical Module <Help> This alarm indicate… |
| 1.3.6.1.4.1.20044.49.2.3.2.24.5 | Scalarpmpump3AlmLaser2OutputPwrLowAlarm | read-only | current | Pre-Amp / IL2 Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm threshold of the IL1 Optical Module <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.49.2.3.2.24.6 | Scalarpmpump3AlmLaser2OutputPwrHighAlarm | read-only | current | Pre-Amp / IL2 Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm threshold of the IL1 Optical Module <Help> This alarm indicat… |
| 1.3.6.1.4.1.20044.49.2.3.2.24.7 | Scalarpmpump3AlmLaser2BiasLowAlarm | read-only | current | Pre-Amp / IL2 Bias Low Alarm :This OID indicates that the Bias is lower than the alarm threshold of the IL1 Optical Module <Help> This alarm indicates if the I… |
| 1.3.6.1.4.1.20044.49.2.3.2.24.8 | Scalarpmpump3AlmLaser2BiasHighAlarm | read-only | current | Pre-Amp / IL2 Bias High Alarm :This OID indicates that the Bias is higher than the alarm threshold of the IL1 Optical Module <Help> This alarm indicates if the… |
| 1.3.6.1.4.1.20044.49.2.3.3 | Nodepmpump3AlmLineCrit | |||
| 1.3.6.1.4.1.20044.49.2.3.3.27 | Nodepmpump3Almlaser2Alarms2 | |||
| 1.3.6.1.4.1.20044.49.2.3.3.27.1 | Scalarpmpump3AlmLaser2AlmCurrent | read-only | current | Pre-Amp / IL2 Current Alarm :This OID indicates that maximum current has reached the internal limitation <Help> This alarm indicates if the current has reached… |
| 1.3.6.1.4.1.20044.49.2.3.3.27.2 | Scalarpmpump3AlmLaser2AlmTemp | read-only | current | Pre-Amp / IL2 Temperature Alarm :This OID indicates that the temperature of the current driver has reached the internal limitation. <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.49.2.3.3.27.3 | Scalarpmpump3AlmLaser2AlmTecPower | read-only | current | Pre-Amp / IL2 TEC Pw :This OID indicates that the TEC power supply is in fail condition . <Help> This alarm indicates if the TEC power is in fail condition <Co… |
| 1.3.6.1.4.1.20044.49.2.3.3.27.4 | Scalarpmpump3AlmLaser2AlmTecDev | read-only | current | Pre-Amp / IL2 TEC Deviation :This OID indicates that the loop control of the TEC is in fail condition <Help> This alarm indicates if the loop control of the TE… |
| 1.3.6.1.4.1.20044.49.2.3.3.27.5 | Scalarpmpump3AlmLaser2OaDisconnectedLsd | read-only | current | Pre-Amp / IL2 Pump Link Disconnected :This OID indicates that the link betwenn the amplifier and the pump is open <Help> This alarm indicates that the OA or th… |
| 1.3.6.1.4.1.20044.49.2.3.3.27.6 | Scalarpmpump3AlmLaser2ExtLsd | read-only | current | Pre-Amp / IL2 Laser Shutdown :This OID indicates that the laser of the pump is shut down <Help> This status indicates that the laser of the pump is shut down <… |
| 1.3.6.1.4.1.20044.49.3 | Nodepmpump3measures | |||
| 1.3.6.1.4.1.20044.49.3.1 | Nodepmpump3MesrOther | |||
| 1.3.6.1.4.1.20044.49.3.1.74 | Scalarpmpump3MesrtempMeas | read-only | current | Module Temperature :This OID gives the temperature of the PM (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature of the module |
| 1.3.6.1.4.1.20044.49.3.2 | Nodepmpump3MesrClient | |||
| 1.3.6.1.4.1.20044.49.3.2.16 | Scalarpmpump3Mesrlaser1BiasMeas | read-only | current | Booster / IL1 Pump Laser Bias :This OID gives the pump laser current of the IL1 laser (Bias = AV/20) (Unit = mA) <Help> This measure gives the bias of the IL1 … |
| 1.3.6.1.4.1.20044.49.3.2.17 | Scalarpmpump3Mesrlaser1VthMeas | read-only | current | Booster / IL1 Pump Temp. Reg. Volt :This OID gives the Voltage of the Temperature Regulator of the IL1 laser (Voltage = AV/10000) (Unit = V) <Help> This measur… |
| 1.3.6.1.4.1.20044.49.3.2.36 | Scalarpmpump3Mesrlaser1Pwr | read-only | current | Booster / IL1 Pump Power :This OID gives the power value provided by the external pump to the IL1 (Power = AV/20) (Unit = mW) <Help> This measure gives the pow… |
| 1.3.6.1.4.1.20044.49.3.2.37 | Scalarpmpump3Mesrlaser1Temp | read-only | current | Booster / IL1 Pump Temperature :This OID gives the temperature value of the pump linked to the IL1 (Temperature = AV/256) (Unit = C) <Help> This measure gives … |
| 1.3.6.1.4.1.20044.49.3.3 | Nodepmpump3MesrLine | |||
| 1.3.6.1.4.1.20044.49.3.3.24 | Scalarpmpump3Mesrlaser2BiasMeas | read-only | current | Pre-Amp / IL2 Pump Laser Bias :This OID gives the pump laser current of the IL2 laser (Bias = AV/20) (Unit = mA) <Help> This measure gives the bias of the IL2 … |
| 1.3.6.1.4.1.20044.49.3.3.25 | Scalarpmpump3Mesrlaser2VthMeas | read-only | current | Pre-Amp / IL2 Pump Temp. Reg. Volt :This OID gives the Voltage of the Temperature Regulator of the IL2 laser (Voltage = AV/10000) (Unit = V) <Help> This measur… |
| 1.3.6.1.4.1.20044.49.3.3.44 | Scalarpmpump3Mesrlaser2Pwr | read-only | current | Pre-Amp / IL2 Pump Power : This OID gives the power value provided by the external pump to the IL2 (Power = AV/20) (Unit = mW) <Help> This measure gives the po… |
| 1.3.6.1.4.1.20044.49.3.3.45 | Scalarpmpump3Mesrlaser2Temp | read-only | current | Pre-Amp / IL2 Pump Temperature :This OID gives the temperature value of the pump linked to the IL2 (Temperature = AV/256) (Unit = C) <Help> This measure gives … |
| 1.3.6.1.4.1.20044.49.6 | Nodepmpump3controlsWrite | |||
| 1.3.6.1.4.1.20044.49.6.1 | Nodepmpump3CtrlOther | |||
| 1.3.6.1.4.1.20044.49.6.1.0 | Nodepmpump3Ctrlsynth0 | |||
| 1.3.6.1.4.1.20044.49.6.1.0.1 | Scalarpmpump3CtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.49.6.1.0.9 | Scalarpmpump3CtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.49.6.1.0.13 | Scalarpmpump3CtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.49.6.1.5 | Nodepmpump3CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.49.6.1.5.2 | Scalarpmpump3CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.49.6.1.5.3 | Scalarpmpump3CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.49.6.1.73 | Nodepmpump3CtrlledTest | |||
| 1.3.6.1.4.1.20044.49.6.1.73.1 | Scalarpmpump3CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.49.6.1.73.2 | Scalarpmpump3CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.49.6.1.73.3 | Scalarpmpump3CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.49.6.2 | Nodepmpump3CtrlClient | |||
| 1.3.6.1.4.1.20044.49.6.2.32 | Nodepmpump3Ctrllaser1LaserOff | |||
| 1.3.6.1.4.1.20044.49.6.2.32.1 | Scalarpmpump3CtrlLaser1LaserOff | read-write | current | Booster / IL1 Pump Laser Off :This OID switches OFF the laser of the IL1 pump. <Help> This control defines the laser state of the IL1 |
| 1.3.6.1.4.1.20044.49.6.2.37 | Scalarpmpump3Ctrllaser1EffPwrOutSettingValue | read-write | current | Booster / IL1 Effective Output Power :This OID sets the value of the effective output power of the IL1 pump (Unit = dBm) <Help> This control defines the IL1 ef… |
| 1.3.6.1.4.1.20044.49.6.3 | Nodepmpump3CtrlLine | |||
| 1.3.6.1.4.1.20044.49.6.3.40 | Nodepmpump3Ctrllaser2LaserOff | |||
| 1.3.6.1.4.1.20044.49.6.3.40.1 | Scalarpmpump3CtrlLaser2LaserOff | read-write | current | Preampli / IL2 Pump Laser Off :This OID switches OFF the laser of the IL2 pump. <Help> This control defines the laser state of the IL2 |
| 1.3.6.1.4.1.20044.49.6.3.45 | Scalarpmpump3Ctrllaser2EffPwrOutSettingValue | read-write | current | Preampli / IL2 Effective Output Power :This OID sets the value of the effective output power of the IL2 pump (Unit = dBm) <Help> This control defines the IL2 e… |
| 1.3.6.1.4.1.20044.49.7 | Nodepmpump3ri | |||
| 1.3.6.1.4.1.20044.49.7.1 | Nodepmpump3riTable | |||
| 1.3.6.1.4.1.20044.49.7.1.1 | Tablepmpump3RinvLaser1Table | not-accessible | current | List of the lasers on the selected module |
| 1.3.6.1.4.1.20044.49.7.1.1.1 | Rowpmpump3RinvLaser1Entry | not-accessible | current | Row definition for the laser table |
| 1.3.6.1.4.1.20044.49.7.1.1.1.1 | Columnpmpump3RinvLaser1Index | read-only | current | Index for laser table |
| 1.3.6.1.4.1.20044.49.7.1.1.1.2 | Columnpmpump3RinvLaser1 | read-only | current | Inventory for the laser: This OID contains the inventory for the laser |
| 1.3.6.1.4.1.20044.49.7.1.2 | Tablepmpump3RinvLaser2Table | not-accessible | current | List of the lasers on the selected module |
| 1.3.6.1.4.1.20044.49.7.1.2.1 | Rowpmpump3RinvLaser2Entry | not-accessible | current | Row definition for the laser table |
| 1.3.6.1.4.1.20044.49.7.1.2.1.1 | Columnpmpump3RinvLaser2Index | read-only | current | Index for laser table |
| 1.3.6.1.4.1.20044.49.7.1.2.1.2 | Columnpmpump3RinvLaser2 | read-only | current | Inventory for the laser: This OID contains the inventory for the laser |
| 1.3.6.1.4.1.20044.49.7.2 | Scalarpmpump3RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.49.7.3 | Scalarpmpump3RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.49.7.4 | Scalarpmpump3RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.49.7.5 | Scalarpmpump3RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.49.9 | Nodepmpump3Config | |||
| 1.3.6.1.4.1.20044.49.9.1 | Nodepmpump3CfgNoValue | |||
| 1.3.6.1.4.1.20044.49.9.1.1 | Nodepmpump3tableclientStartup | |||
| 1.3.6.1.4.1.20044.49.9.1.1.2 | Scalarpmpump3Cfglaser1Ctrl | read-write | current | Default Settings on IL1 pump Laser :This OID configures the default initialisation settings on the IL1 pump laser. |
| 1.3.6.1.4.1.20044.49.9.2 | Nodepmpump3CfgLineStartUp | |||
| 1.3.6.1.4.1.20044.49.9.2.1 | Nodepmpump3tablelineStartup | |||
| 1.3.6.1.4.1.20044.49.9.2.1.2 | Scalarpmpump3Cfglaser2Ctrl | read-write | current | Default Settings on IL2 pump Laser :This OID configures the default initialisation settings on the IL2 pump laser. |
| 1.3.6.1.4.1.20044.49.9.3 | Nodepmpump3CfgLabels | |||
| 1.3.6.1.4.1.20044.49.9.3.1 | Tablepmpump3CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.49.9.3.1.1 | Rowpmpump3CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.49.9.3.1.1.1 | Columnpmpump3CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.49.9.3.1.1.3 | Columnpmpump3CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.49.9.3.2 | Tablepmpump3CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.49.9.3.2.1 | Rowpmpump3CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.49.9.3.2.1.1 | Columnpmpump3CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.49.9.3.2.1.3 | Columnpmpump3CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.49.9.257 | Scalarpmpump3CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.49.10 | Nodepmpump3traps | |||
| 1.3.6.1.4.1.20044.49.10.4 | Scalarpmpump3trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.49.10.30 | Notificationpmpump3Laser2TrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.49.10.31 | Notificationpmpump3Laser2TrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.49.10.32 | Notificationpmpump3Laser2TrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.49.10.33 | Notificationpmpump3Laser2TrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.49.10.34 | Notificationpmpump3Laser2TrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.49.10.35 | Notificationpmpump3Laser2TrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.49.10.40 | Notificationpmpump3Laser1TrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.49.10.41 | Notificationpmpump3Laser1TrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.49.10.42 | Notificationpmpump3Laser1TrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.49.10.43 | Notificationpmpump3Laser1TrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.49.10.44 | Notificationpmpump3Laser1TrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.49.10.45 | Notificationpmpump3Laser1TrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.49.10.50 | Notificationpmpump3PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.49.10.51 | Notificationpmpump3PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |