EKINOPS-Pmapc-MIB
204 objects
MIB for the Ekinops Pmapc hardware.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.42 | IdentitymodulePmapc | MIB for the Ekinops Pmapc hardware. | ||
| 1.3.6.1.4.1.20044.42.2 | Nodepmapcalarms | |||
| 1.3.6.1.4.1.20044.42.2.1 | NodepmapcAlmOther | |||
| 1.3.6.1.4.1.20044.42.2.1.1 | NodepmapcAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.42.2.1.1.2 | NodepmapcAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.42.2.1.1.2.1 | ScalarpmapcAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.42.2.1.1.2.2 | ScalarpmapcAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.42.2.1.1.2.3 | ScalarpmapcAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.42.2.1.1.2.4 | ScalarpmapcAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.42.2.1.1.65 | NodepmapcAlmmoduleWarning | |||
| 1.3.6.1.4.1.20044.42.2.1.1.65.1 | ScalarpmapcAlmPwrInLowWng | read-only | current | Power Input Low Warning :This OID indicates that input power of the transmit side is lower than the warning threshold <Help> This warning indicates if the rece… |
| 1.3.6.1.4.1.20044.42.2.1.1.65.2 | ScalarpmapcAlmPwrInHighWng | read-only | current | Power Input High Warning :This OID indicates that input power of the transmit side is higher than the warning threshold <Help> This warning indicates if the re… |
| 1.3.6.1.4.1.20044.42.2.1.1.65.3 | ScalarpmapcAlmPwrOutLowWng | read-only | current | Power Output Low Warning :This OID indicates that Output power of the transmit side is lower than the warning threshold <Help> This warning indicates if the tr… |
| 1.3.6.1.4.1.20044.42.2.1.1.65.4 | ScalarpmapcAlmPwrOutHighWng | read-only | current | Power Output High Warning :This OID indicates that Output power of the transmit side is higher than the warning threshold <Help> This warning indicates if the … |
| 1.3.6.1.4.1.20044.42.2.1.1.65.5 | ScalarpmapcAlmEamAttLowWng | read-only | current | EAM Attenuation Low Warning :This OID indicates that the attenuation of the EAM is lower than the warning threshold <Help> This warning indicates if the attenu… |
| 1.3.6.1.4.1.20044.42.2.1.1.65.6 | ScalarpmapcAlmEamAttHighWng | read-only | current | EAM Attenuation High Warning :EThis OID indicates that the attenuation of the EAM is higher than the warning threshold <Help> This warning indicates if the att… |
| 1.3.6.1.4.1.20044.42.2.1.2 | NodepmapcAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.42.2.1.2.64 | NodepmapcAlmmoduleAlarm | |||
| 1.3.6.1.4.1.20044.42.2.1.2.64.1 | ScalarpmapcAlmPwrInLowAla | read-only | current | Power Input Low Alarm :This OID indicates that input power of the transmit side is lower than the alarm threshold <Help> This alarm indicates if the received p… |
| 1.3.6.1.4.1.20044.42.2.1.2.64.2 | ScalarpmapcAlmPwrInHighAla | read-only | current | Power Input High Alarm :This OID indicates that input power of the transmit side is higher than the alarm threshold <Help> This alarm indicates if the received… |
| 1.3.6.1.4.1.20044.42.2.1.2.64.3 | ScalarpmapcAlmPwrOutLowAla | read-only | current | Power Output Low Alarm :This OID indicates that Output power of the transmit side is lower than the alarm threshold <Help> This alarm indicates if the transmit… |
| 1.3.6.1.4.1.20044.42.2.1.2.64.4 | ScalarpmapcAlmPwrOutHighAla | read-only | current | Power Output High Alarm :This OID indicates that Output power of the transmit side is higher than the alarm threshold <Help> This alarm indicates if the transm… |
| 1.3.6.1.4.1.20044.42.2.1.2.64.5 | ScalarpmapcAlmEamAttLowAla | read-only | current | EAM Attenuation Low Alarm :This OID indicates that the attenuation of the EAM is lower than the alarm threshold <Help> This alarm indicates if the attenuation … |
| 1.3.6.1.4.1.20044.42.2.1.2.64.6 | ScalarpmapcAlmEamAttHighAla | read-only | current | EAM Attenuation High Alarm :This OID indicates that the attenuation of the EAM is higher than the alarm threshold <Help> This alarm indicates if the attenuatio… |
| 1.3.6.1.4.1.20044.42.2.1.2.64.16 | ScalarpmapcAlmLossInputSignal | read-only | current | Loss Of Input Signal :This OID indicates there is a Loss of Signal on the input of the module. <Help> This alarm indicates if there is a Loss of Signal of the … |
| 1.3.6.1.4.1.20044.42.2.1.2.70 | NodepmapcAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.42.2.1.2.70.1 | ScalarpmapcAlmRegReadFail | read-only | current | Reg_Read_Fail : <Condtype> REG_READ_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.2.70.2 | ScalarpmapcAlmResetHwInitFail | read-only | current | Reset_HW_Init_Fail : <Condtype> RESET_HW_INIT_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.2.70.3 | ScalarpmapcAlmConfReadFail | read-only | current | Conf_Read_Fail : <Condtype> CONF_READ_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.2.70.4 | ScalarpmapcAlmInvReadFail | read-only | current | : <Condtype> INV_READ_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.2.70.6 | ScalarpmapcAlmCalibReadFail | read-only | current | Calib_Read_Fail : <Condtype> CALIB_READ_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.2.70.7 | ScalarpmapcAlmThreshConfFail | read-only | current | Thresh_Conf_Fail : <Condtype> THRESH_CONF_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.2.71 | NodepmapcAlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.42.2.1.2.71.1 | ScalarpmapcAlmOptIdentFail | read-only | current | Opt_Ident_Fail : <Condtype> OPT_IDENT_FAIL <Probcause> softwareError (47) <Alarmtype> processingErrorAlarm (4) <Polarity> (2) |
| 1.3.6.1.4.1.20044.42.2.1.3 | NodepmapcAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.42.2.1.3.0 | NodepmapcAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.42.2.1.3.0.5 | ScalarpmapcAlmPwrInAla | read-only | current | Power Input Alarm :This OID indicates that the power input on the transmit side is in fail condition <Help> This alarm indicates that the power input is in an … |
| 1.3.6.1.4.1.20044.42.2.1.3.0.6 | ScalarpmapcAlmPwrInWng | read-only | current | Power Input Warning :This OID indicates that the power input on the transmit side is in warning condition <Help> This warning indicates that the power input is… |
| 1.3.6.1.4.1.20044.42.2.1.3.0.7 | ScalarpmapcAlmPwrOutAla | read-only | current | Power Output Alarm :This OID indicates that the power output on the transmit side is in fail condition <Help> This alarm indicates that the power output is in … |
| 1.3.6.1.4.1.20044.42.2.1.3.0.8 | ScalarpmapcAlmPwrOutWng | read-only | current | Power Output Warning :This OID indicates that the power output on the transmit side is in warning condition <Help> This warning indicates that the power output… |
| 1.3.6.1.4.1.20044.42.2.1.3.0.9 | ScalarpmapcAlmModuleGlobFailure | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MODULE_GLOB_FAILURE <Probcause> equipmentMalfunction (16) <Alarmty… |
| 1.3.6.1.4.1.20044.42.2.1.3.0.15 | ScalarpmapcAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.42.2.1.3.0.16 | ScalarpmapcAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.42.2.2 | NodepmapcAlmClient | |||
| 1.3.6.1.4.1.20044.42.2.2.1 | NodepmapcAlmClientNurg | |||
| 1.3.6.1.4.1.20044.42.2.2.1.18 | NodepmapcAlmlaser1MeasWng | |||
| 1.3.6.1.4.1.20044.42.2.2.1.18.1 | ScalarpmapcAlmPwrLas1LowWng | read-only | current | Laser 1 Pwr Low Warning :This OID indicates that transmit power of the Stuffing Wavelength Laser 1 is lower than the warning threshold <Help> This warning indi… |
| 1.3.6.1.4.1.20044.42.2.2.1.18.2 | ScalarpmapcAlmPwrLas1HighWng | read-only | current | Laser 1 Pwr High Warning :This OID indicates that transmit power of the Stuffing Wavelength Laser 1 is higher than the warning threshold <Help> This warning in… |
| 1.3.6.1.4.1.20044.42.2.2.1.18.3 | ScalarpmapcAlmVthLas1LowWng | read-only | current | Laser 1 TEC Temp Low Warning :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 1 is lower than the warning threshold <Help> This wa… |
| 1.3.6.1.4.1.20044.42.2.2.1.18.4 | ScalarpmapcAlmVthLas1HighWng | read-only | current | Laser 1 TEC Temp High Warning :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 1 is higher than the warning threshold <Help> This … |
| 1.3.6.1.4.1.20044.42.2.2.1.18.5 | ScalarpmapcAlmVtecLas1LowWng | read-only | current | Laser 1 TEC Volt Low Warning :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 1 is lower than the warning threshold <Help> This warnin… |
| 1.3.6.1.4.1.20044.42.2.2.1.18.6 | ScalarpmapcAlmVtecLas1HighWng | read-only | current | Laser 1 TEC Volt High Warning :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 1 is higher than the warning threshold <Help> This warn… |
| 1.3.6.1.4.1.20044.42.2.2.1.18.7 | ScalarpmapcAlmILas1LowWng | read-only | current | Laser 1 Current Low Warning :This OID indicates that the current of the Stuffing Wavelength Laser 1 is lower than the warning threshold <Help> This warning ind… |
| 1.3.6.1.4.1.20044.42.2.2.1.18.8 | ScalarpmapcAlmILas1HighWng | read-only | current | Laser 1 Current High Warning :This OID indicates that the current of the Stuffing Wavelength Laser 1 is higher than the warning threshold <Help> This warning i… |
| 1.3.6.1.4.1.20044.42.2.2.2 | NodepmapcAlmClientUrg | |||
| 1.3.6.1.4.1.20044.42.2.2.2.16 | NodepmapcAlmlaser1Alm | |||
| 1.3.6.1.4.1.20044.42.2.2.2.16.1 | ScalarpmapcAlmLas1Fail | read-only | current | Stuff. Wavelength 1 Fail :This OID indicates that the Stuffing Wavelength Laser 1 failed on the transmit side <Help> This alarm indicates if the laser of the t… |
| 1.3.6.1.4.1.20044.42.2.2.2.16.2 | ScalarpmapcAlmLas1Tec1Fail | read-only | current | Stuff. Wavelength 1 TEC Fail :This OID indicates that the TEC of the Stuffing Wavelength Laser 1 failed on the transmit side. <Help> This alarm indicates if th… |
| 1.3.6.1.4.1.20044.42.2.2.2.17 | NodepmapcAlmlaser1MeasAlm | |||
| 1.3.6.1.4.1.20044.42.2.2.2.17.1 | ScalarpmapcAlmPwrLas1LowAla | read-only | current | Laser 1 Pwr Low Alarm :This OID indicates that transmit power of the Stuffing Wavelength Laser 1 is lower than the alarm threshold <Help> This alarm indicates … |
| 1.3.6.1.4.1.20044.42.2.2.2.17.2 | ScalarpmapcAlmPwrLas1HighAla | read-only | current | Laser 1 Pwr High Alarm :This OID indicates that transmit power of the Stuffing Wavelength Laser 1 is higher than the alarm threshold <Help> This alarm indicate… |
| 1.3.6.1.4.1.20044.42.2.2.2.17.3 | ScalarpmapcAlmVthLas1LowAla | read-only | current | Laser 1 TEC Temp Low Alarm :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 1 is lower than the alarm threshold <Help> This alarm … |
| 1.3.6.1.4.1.20044.42.2.2.2.17.4 | ScalarpmapcAlmVthLas1HighAla | read-only | current | Laser 1 TEC Temp High Alarm :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 1 is higher than the alarm threshold <Help> This alar… |
| 1.3.6.1.4.1.20044.42.2.2.2.17.5 | ScalarpmapcAlmVtecLas1LowAla | read-only | current | Laser 1 TEC Volt Low Alarm :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 1 is lower than the alarm threshold <Help> This alarm indi… |
| 1.3.6.1.4.1.20044.42.2.2.2.17.6 | ScalarpmapcAlmVtecLas1HighAla | read-only | current | Laser 1 TEC Volt High Alarm :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 1 is higher than the alarm threshold <Help> This alarm in… |
| 1.3.6.1.4.1.20044.42.2.2.2.17.7 | ScalarpmapcAlmILas1LowAla | read-only | current | Laser 1 Current Low Alarm :This OID indicates that the current of the Stuffing Wavelength Laser 1 is lower than the alarm threshold <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.42.2.2.2.17.8 | ScalarpmapcAlmILas1HighAla | read-only | current | Laser 1 Current High Alarm :This OID indicates that the current of the Stuffing Wavelength Laser 1 is higher than the alarm threshold <Help> This alarm indicat… |
| 1.3.6.1.4.1.20044.42.2.2.3 | NodepmapcAlmClientCrit | |||
| 1.3.6.1.4.1.20044.42.2.2.3.8 | NodepmapcAlmsynthAlmLaser1 | |||
| 1.3.6.1.4.1.20044.42.2.2.3.8.2 | ScalarpmapcAlmLas1InitNotCompl | read-only | current | Stuff. Wavelength 1 Not Ready :This OID indicates that the optical interface of the Stuffing Wavelength Laser 1 is not operational. <Help> This status indicate… |
| 1.3.6.1.4.1.20044.42.2.2.3.8.4 | ScalarpmapcAlmLas1HwFailAcc | read-only | current | Stuff. Wavelength 1 HW Fail :This OID indicates a hardware failure on the Stuffing Wavelength Laser 1 <Condtype> LAS1_HW_FAIL_ACC <Probcause> equipmentMalfunct… |
| 1.3.6.1.4.1.20044.42.2.2.3.8.6 | ScalarpmapcAlmLas1LocalOos | read-only | current | Stuff. Wavelength 1 Out Of Service :This OID indicates that the Stuffing Wavelength Laser 1 is In Service (1) of Out or Service (2). <Help> This status indicat… |
| 1.3.6.1.4.1.20044.42.2.2.3.8.9 | ScalarpmapcAlmLas1MeasWng | read-only | current | Stuff. Wavelength 1 Warning :This OID indicates a warning is present coming out of Stuffing Wavelength Laser 1 monitoring <Help> This alarm indicates if a moni… |
| 1.3.6.1.4.1.20044.42.2.2.3.8.10 | ScalarpmapcAlmLas1MeasAlm | read-only | current | Stuff. Wavelength 1 Alarm :This OID indicates if an alarm is present coming out of Stuffing Wavelength Laser 1 monitoring <Help> This alarm indicates if a moni… |
| 1.3.6.1.4.1.20044.42.2.2.3.8.12 | ScalarpmapcAlmLas1FailAcc | read-only | current | Stuff. Wavelength 1 Fail :This OID indicates a failure on the Stuffing Wavelength Laser 1 <Condtype> LAS1_FAIL_ACC <Probcause> equipmentMalfunction (16) <Alarm… |
| 1.3.6.1.4.1.20044.42.2.2.3.9 | NodepmapcAlmsynthAlmLaser2 | |||
| 1.3.6.1.4.1.20044.42.2.2.3.9.2 | ScalarpmapcAlmLas2InitNotCompl | read-only | current | Stuff. Wavelength 2 Not Ready :This OID indicates that the optical interface of the Stuffing Wavelength Laser 2 is not operational. <Help> This status indicate… |
| 1.3.6.1.4.1.20044.42.2.2.3.9.4 | ScalarpmapcAlmLas2HwFailAcc | read-only | current | Stuff. Wavelength 2 HW Fail :This OID indicates a hardware failure on the Stuffing Wavelength Laser 2 <Condtype> LAS2_HW_FAIL_ACC <Probcause> equipmentMalfunct… |
| 1.3.6.1.4.1.20044.42.2.2.3.9.6 | ScalarpmapcAlmLas2LocalOos | read-only | current | Stuff. Wavelength 2 Out Of Service :This OID indicates that the Stuffing Wavelength Laser 2 is In Service (2) of Out or Service (2). <Help> This status indicat… |
| 1.3.6.1.4.1.20044.42.2.2.3.9.9 | ScalarpmapcAlmLas2MeasWng | read-only | current | Stuff. Wavelength 2 Warning :This OID indicates a warning is present coming out of Stuffing Wavelength Laser 2 monitoring <Help> This alarm indicates if a moni… |
| 1.3.6.1.4.1.20044.42.2.2.3.9.10 | ScalarpmapcAlmLas2MeasAlm | read-only | current | Stuff. Wavelength 2 Alarm :This OID indicates if an alarm is present coming out of Stuffing Wavelength Laser 2 monitoring <Help> This alarm indicates if a moni… |
| 1.3.6.1.4.1.20044.42.2.2.3.9.12 | ScalarpmapcAlmLas2FailAcc | read-only | current | Stuff. Wavelength 2 Fail :This OID indicates a failure on the Stuffing Wavelength Laser 2 <Condtype> LAS2_FAIL_ACC <Probcause> equipmentMalfunction (16) <Alarm… |
| 1.3.6.1.4.1.20044.42.2.3 | NodepmapcAlmLine | |||
| 1.3.6.1.4.1.20044.42.2.3.1 | NodepmapcAlmLineNurg | |||
| 1.3.6.1.4.1.20044.42.2.3.1.26 | NodepmapcAlmlaser2MeasWng | |||
| 1.3.6.1.4.1.20044.42.2.3.1.26.1 | ScalarpmapcAlmPwrLas2LowWng | read-only | current | Laser 2 Pwr Low Warning :This OID indicates that transmit power of the Stuffing Wavelength Laser 2 is lower than the warning threshold <Help> This warning indi… |
| 1.3.6.1.4.1.20044.42.2.3.1.26.2 | ScalarpmapcAlmPwrLas2HighWng | read-only | current | Laser 2 Pwr High Warning :This OID indicates that transmit power of the Stuffing Wavelength Laser 2 is higher than the warning threshold <Help> This warning in… |
| 1.3.6.1.4.1.20044.42.2.3.1.26.3 | ScalarpmapcAlmVthLas2LowWng | read-only | current | Laser 2 TEC Temp Low Warning :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 2 is lower than the warning threshold <Help> This wa… |
| 1.3.6.1.4.1.20044.42.2.3.1.26.4 | ScalarpmapcAlmVthLas2HighWng | read-only | current | Laser 2 TEC Temp High Warning :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 2 is higher than the warning threshold <Help> This … |
| 1.3.6.1.4.1.20044.42.2.3.1.26.5 | ScalarpmapcAlmVtecLas2LowWng | read-only | current | Laser 2 TEC Volt Low Warning :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 2 is lower than the warning threshold <Help> This warnin… |
| 1.3.6.1.4.1.20044.42.2.3.1.26.6 | ScalarpmapcAlmVtecLas2HighWng | read-only | current | Laser 2 TEC Volt High Warning :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 2 is higher than the warning threshold <Help> This warn… |
| 1.3.6.1.4.1.20044.42.2.3.1.26.7 | ScalarpmapcAlmILas2LowWng | read-only | current | Laser 2 Current Low Warning :This OID indicates that the current of the Stuffing Wavelength Laser 2 is lower than the warning threshold <Help> This warning ind… |
| 1.3.6.1.4.1.20044.42.2.3.1.26.8 | ScalarpmapcAlmILas2HighWng | read-only | current | Laser 2 Current High Warning :This OID indicates that the current of the Stuffing Wavelength Laser 2 is higher than the warning threshold <Help> This warning i… |
| 1.3.6.1.4.1.20044.42.2.3.2 | NodepmapcAlmLineUrg | |||
| 1.3.6.1.4.1.20044.42.2.3.2.24 | NodepmapcAlmlaser2Alm | |||
| 1.3.6.1.4.1.20044.42.2.3.2.24.1 | ScalarpmapcAlmLas2Fail | read-only | current | Stuff. Wavelength 2 Fail :This OID indicates that the Stuffing Wavelength Laser 2 failed on the transmit side <Help> This alarm indicates if the laser of the t… |
| 1.3.6.1.4.1.20044.42.2.3.2.24.2 | ScalarpmapcAlmLas2TecFail | read-only | current | Stuff. Wavelength 2 TEC Fail :This OID indicates that the TEC of the Stuffing Wavelength Laser 2 failed on the transmit side. <Help> This alarm indicates if th… |
| 1.3.6.1.4.1.20044.42.2.3.2.25 | NodepmapcAlmlaser2MeasAla | |||
| 1.3.6.1.4.1.20044.42.2.3.2.25.1 | ScalarpmapcAlmPwrLas2LowAla | read-only | current | Laser 2 Pwr Low Alarm :This OID indicates that transmit power of the Stuffing Wavelength Laser 2 is lower than the alarm threshold <Help> This alarm indicates … |
| 1.3.6.1.4.1.20044.42.2.3.2.25.2 | ScalarpmapcAlmPwrLas2HighAla | read-only | current | Laser 2 Pwr High Alarm :This OID indicates that transmit power of the Stuffing Wavelength Laser 2 is higher than the alarm threshold <Help> This alarm indicate… |
| 1.3.6.1.4.1.20044.42.2.3.2.25.3 | ScalarpmapcAlmVthLas2LowAla | read-only | current | Laser 2 TEC Temp Low Alarm :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 2 is lower than the alarm threshold <Help> This alarm … |
| 1.3.6.1.4.1.20044.42.2.3.2.25.4 | ScalarpmapcAlmVthLas2HighAla | read-only | current | Laser 2 TEC Temp High Alarm :This OID indicates that the TEC temperature of the Stuffing Wavelength Laser 2 is higher than the alarm threshold <Help> This alar… |
| 1.3.6.1.4.1.20044.42.2.3.2.25.5 | ScalarpmapcAlmVtecLas2LowAla | read-only | current | Laser 2 TEC Volt Low Alarm :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 2 is lower than the alarm threshold <Help> This alarm indi… |
| 1.3.6.1.4.1.20044.42.2.3.2.25.6 | ScalarpmapcAlmVtecLas2HighAla | read-only | current | Laser 2 TEC Volt High Alarm :This OID indicates that the TEC voltage of the Stuffing Wavelength Laser 2 is higher than the alarm threshold <Help> This alarm in… |
| 1.3.6.1.4.1.20044.42.2.3.2.25.7 | ScalarpmapcAlmILas2LowAla | read-only | current | Laser 2 Current Low Alarm :This OID indicates that the current of the Stuffing Wavelength Laser 2 is lower than the alarm threshold <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.42.2.3.2.25.8 | ScalarpmapcAlmILas2HighAla | read-only | current | Laser 2 Current High Alarm :This OID indicates that the current of the Stuffing Wavelength Laser 2 is higher than the alarm threshold <Help> This alarm indicat… |
| 1.3.6.1.4.1.20044.42.2.3.3 | NodepmapcAlmLineCrit | |||
| 1.3.6.1.4.1.20044.42.3 | Nodepmapcmeasures | |||
| 1.3.6.1.4.1.20044.42.3.1 | NodepmapcMesrOther | |||
| 1.3.6.1.4.1.20044.42.3.1.64 | ScalarpmapcMesrmodulePowerIn | read-only | current | Module Input Power :This OID gives the input power of the module (Power=(AV-32768)*0.005) (Unit = dBm) <Help> This measure gives the input power of the module |
| 1.3.6.1.4.1.20044.42.3.1.65 | ScalarpmapcMesrmoduleVPowerOut | read-only | current | Module Output Power Voltage :This OID gives the output power voltage (Voltage = AV/10000) (Unit = V) <Help> This measure gives the output power voltage of the … |
| 1.3.6.1.4.1.20044.42.3.1.66 | ScalarpmapcMesrmoduleEamAtt | read-only | current | Stuffing Lasers Attenuation :This OID gives the attenuation level applied on the stuffing lasers in percent (0: not attenuation, 100: full attenuation) (Attenu… |
| 1.3.6.1.4.1.20044.42.3.1.67 | ScalarpmapcMesrmoduleTemp | read-only | current | Module Temperature :This OID gives the module temperature (Temperature = AV/256) (Unit = C) <Help> This measure gives the module temperature |
| 1.3.6.1.4.1.20044.42.3.1.68 | ScalarpmapcMesrmodule33v | read-only | current | Module 3.3 Voltage :This OID gives the module 3V3 Voltage (Voltage = AV/10000) (Unit = V) <Help> This measure gives the module 3V3 Voltage |
| 1.3.6.1.4.1.20044.42.3.2 | NodepmapcMesrClient | |||
| 1.3.6.1.4.1.20044.42.3.2.16 | ScalarpmapcMesrpowerLas1 | read-only | current | Stuff, Wavelength 1 Power :This OID gives the power value of the Sutfing Wavelength 1 Laser (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the … |
| 1.3.6.1.4.1.20044.42.3.2.17 | ScalarpmapcMesrvthLas1 | read-only | current | Stuff. Wavelength 1 Temp. Reg. Volt :This OID gives the Voltage of the Temperature Regulator of the Stuffing Wavelength 1 (Voltage = AV/10000) (Unit = V) <Help… |
| 1.3.6.1.4.1.20044.42.3.2.18 | ScalarpmapcMesrvtecLas1 | read-only | current | Stuff. Wavelength 1 TEC Voltage :This OID gives the Voltage of the TEC of the Stuffing Wavelength 1 (Voltage = AV/10000) (Unit = V) <Help> This measure gives t… |
| 1.3.6.1.4.1.20044.42.3.2.19 | ScalarpmapcMesriLas1 | read-only | current | : |
| 1.3.6.1.4.1.20044.42.3.3 | NodepmapcMesrLine | |||
| 1.3.6.1.4.1.20044.42.3.3.24 | ScalarpmapcMesrpowerLas2 | read-only | current | Stuff, Wavelength 2 Power :This OID gives the power value of the Sutfing Wavelength 2 Laser (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the … |
| 1.3.6.1.4.1.20044.42.3.3.25 | ScalarpmapcMesrvthLas2 | read-only | current | Stuff. Wavelength 2 Temp. Reg. Volt :This OID gives the Voltage of the Temperature Regulator of the Stuffing Wavelength 2 (Voltage = AV/10000) (Unit = V) <Help… |
| 1.3.6.1.4.1.20044.42.3.3.26 | ScalarpmapcMesrvtecLas2 | read-only | current | Stuff. Wavelength 2 TEC Voltage :This OID gives the Voltage of the TEC of the Stuffing Wavelength 2 (Voltage = AV/10000) (Unit = V) <Help> This measure gives t… |
| 1.3.6.1.4.1.20044.42.3.3.27 | ScalarpmapcMesriLas2 | read-only | current | : |
| 1.3.6.1.4.1.20044.42.6 | NodepmapccontrolsWrite | |||
| 1.3.6.1.4.1.20044.42.6.1 | NodepmapcCtrlOther | |||
| 1.3.6.1.4.1.20044.42.6.1.0 | NodepmapcCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.42.6.1.0.1 | ScalarpmapcCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.42.6.1.0.9 | ScalarpmapcCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.42.6.1.0.13 | ScalarpmapcCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.42.6.1.4 | NodepmapcCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.42.6.1.4.1 | ScalarpmapcCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.42.6.1.4.2 | ScalarpmapcCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.42.6.1.5 | NodepmapcCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.42.6.1.5.2 | ScalarpmapcCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.42.6.1.5.3 | ScalarpmapcCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.42.6.1.64 | NodepmapcCtrlledTest | |||
| 1.3.6.1.4.1.20044.42.6.1.64.1 | ScalarpmapcCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.42.6.1.64.2 | ScalarpmapcCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.42.6.1.64.3 | ScalarpmapcCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.42.6.2 | NodepmapcCtrlClient | |||
| 1.3.6.1.4.1.20044.42.6.2.16 | NodepmapcCtrllaser1Shutdown | |||
| 1.3.6.1.4.1.20044.42.6.2.16.1 | ScalarpmapcCtrlLaser1Shutdown | read-write | current | Stuff. Wavelength 1 Laser Shutdown :This OID shuts down the laser of the Stuffing Wavelength 1 <Help> This control shuts down the laser of the Stuffing Wavelen… |
| 1.3.6.1.4.1.20044.42.6.2.18 | NodepmapcCtrllaser1Oos | |||
| 1.3.6.1.4.1.20044.42.6.2.18.1 | ScalarpmapcCtrlLaser1OosMode | read-write | current | Stuff. Wavelength 1 Out Of Service :This OID sets the Stuffing Wavelength 1 Out of Service <Help> This controls defines the service state of the Stuffing Wavel… |
| 1.3.6.1.4.1.20044.42.6.3 | NodepmapcCtrlLine | |||
| 1.3.6.1.4.1.20044.42.6.3.17 | NodepmapcCtrllaser2Shutdown | |||
| 1.3.6.1.4.1.20044.42.6.3.17.1 | ScalarpmapcCtrlLaser2Shutdown | read-write | current | Stuff. Wavelength 2 Laser Shutdown :This OID shuts down the laser of the Stuffing Wavelength 2 <Help> This control shuts down the laser of the Stuffing Wavelen… |
| 1.3.6.1.4.1.20044.42.6.3.19 | NodepmapcCtrllaser2Oos | |||
| 1.3.6.1.4.1.20044.42.6.3.19.1 | ScalarpmapcCtrlLaser2OosMode | read-write | current | Stuff. Wavelength 2 Out Of Service :This OID sets the Stuffing Wavelength 2 Out of Service <Help> This controls defines the service state of the Stuffing Wavel… |
| 1.3.6.1.4.1.20044.42.6.3.65 | ScalarpmapcCtrlmoduleOutputPwrSetting | read-write | current | Module Output Power [-14 , +6] :This OID sets the output power of the module (AV=(Power/0.005)+32768) (Unit = dBm) <Help> This control defines the output power… |
| 1.3.6.1.4.1.20044.42.6.3.66 | ScalarpmapcCtrlmoduleInputPwrSetting | read-write | current | Module Input Power :This OID sets the input power of the module (AV=(Power/0.005)+32768) (Unit = dBm) <Help> This control defines the input power of the module |
| 1.3.6.1.4.1.20044.42.7 | Nodepmapcri | |||
| 1.3.6.1.4.1.20044.42.7.1 | NodepmapcriTable | |||
| 1.3.6.1.4.1.20044.42.7.1.1 | TablepmapcRinvLaser1Table | not-accessible | current | List of the laser clients on the selected module |
| 1.3.6.1.4.1.20044.42.7.1.1.1 | RowpmapcRinvLaser1Entry | not-accessible | current | Row definition for the laser client table |
| 1.3.6.1.4.1.20044.42.7.1.1.1.1 | ColumnpmapcRinvLaser1Index | read-only | current | Index for laser client table |
| 1.3.6.1.4.1.20044.42.7.1.1.1.2 | ColumnpmapcRinvLaser1 | read-only | current | Inventory for the laser client: This OID contains the inventory for the laser client |
| 1.3.6.1.4.1.20044.42.7.1.2 | TablepmapcRinvLaser2Table | not-accessible | current | List of the laser clients on the selected module |
| 1.3.6.1.4.1.20044.42.7.1.2.1 | RowpmapcRinvLaser2Entry | not-accessible | current | Row definition for the laser client table |
| 1.3.6.1.4.1.20044.42.7.1.2.1.1 | ColumnpmapcRinvLaser2Index | read-only | current | Index for laser client table |
| 1.3.6.1.4.1.20044.42.7.1.2.1.2 | ColumnpmapcRinvLaser2 | read-only | current | Inventory for the laser client: This OID contains the inventory for the laser client |
| 1.3.6.1.4.1.20044.42.7.2 | ScalarpmapcRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.42.7.3 | ScalarpmapcRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.42.7.4 | ScalarpmapcRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.42.7.5 | ScalarpmapcRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.42.9 | NodepmapcConfig | |||
| 1.3.6.1.4.1.20044.42.9.1 | NodepmapcCfgLsd | |||
| 1.3.6.1.4.1.20044.42.9.1.1 | NodepmapctablecomaLsd | |||
| 1.3.6.1.4.1.20044.42.9.2 | NodepmapcCfgStartUp | |||
| 1.3.6.1.4.1.20044.42.9.2.1 | NodepmapctablecomaStartup | |||
| 1.3.6.1.4.1.20044.42.9.2.1.2 | ScalarpmapcCfglaser1Oos | read-write | current | Default setting on laser 1 :This register configures the default service state on laser 1 |
| 1.3.6.1.4.1.20044.42.9.2.2 | NodepmapctablecombStartup | |||
| 1.3.6.1.4.1.20044.42.9.2.2.2 | ScalarpmapcCfglaser2Oos | read-write | current | Default setting on laser 2 :This register configures the default service state on laser 2 |
| 1.3.6.1.4.1.20044.42.9.2.2.10 | ScalarpmapcCfgmoduleOutputPwrSetting | read-write | current | Default setting on module output power :This register configures the default output power level of the module |
| 1.3.6.1.4.1.20044.42.9.2.2.11 | ScalarpmapcCfgmoduleInputPwrSetting | read-write | current | Default setting on module input power :This register configures the default input power level of the module |
| 1.3.6.1.4.1.20044.42.9.3 | NodepmapcCfgLabels | |||
| 1.3.6.1.4.1.20044.42.9.3.1 | TablepmapcCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.42.9.3.1.1 | RowpmapcCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.42.9.3.1.1.1 | ColumnpmapcCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.42.9.3.1.1.3 | ColumnpmapcCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.42.9.3.2 | TablepmapcCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.42.9.3.2.1 | RowpmapcCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.42.9.3.2.1.1 | ColumnpmapcCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.42.9.3.2.1.3 | ColumnpmapcCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.42.9.257 | ScalarpmapcCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.42.10 | Nodepmapctraps | |||
| 1.3.6.1.4.1.20044.42.10.2 | ScalarpmapctrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.42.10.3 | ScalarpmapctrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.42.10.4 | ScalarpmapctrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.42.10.30 | NotificationpmapcLas2TrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.42.10.31 | NotificationpmapcLas2TrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.42.10.32 | NotificationpmapcLas2TrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.42.10.33 | NotificationpmapcLas2TrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.42.10.34 | NotificationpmapcLas2TrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.42.10.35 | NotificationpmapcLas2TrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.42.10.40 | NotificationpmapcLas1TrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.42.10.41 | NotificationpmapcLas1TrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.42.10.42 | NotificationpmapcLas1TrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.42.10.43 | NotificationpmapcLas1TrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.42.10.44 | NotificationpmapcLas1TrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.42.10.45 | NotificationpmapcLas1TrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.42.10.50 | NotificationpmapcPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.42.10.51 | NotificationpmapcPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |