EKINOPS-Pmc1008MP-MIB
896 objects
MIB for managing Ekinops modules with PM1008MP software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.47 | IdentitymodulePmc1008mp | MIB for managing Ekinops modules with PM1008MP software | ||
| 1.3.6.1.4.1.20044.47.2 | Nodepmc1008mpalarms | |||
| 1.3.6.1.4.1.20044.47.2.1 | Nodepmc1008mpAlmOther | |||
| 1.3.6.1.4.1.20044.47.2.1.1 | Nodepmc1008mpAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.47.2.1.1.2 | Nodepmc1008mpAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.47.2.1.1.2.1 | Scalarpmc1008mpAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.47.2.1.1.2.2 | Scalarpmc1008mpAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.47.2.1.1.2.3 | Scalarpmc1008mpAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.47.2.1.1.2.4 | Scalarpmc1008mpAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.47.2.1.2 | Nodepmc1008mpAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.47.2.1.2.194 | Nodepmc1008mpAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.47.2.1.2.194.1 | Scalarpmc1008mpAlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.47.2.1.2.194.2 | Scalarpmc1008mpAlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.47.2.1.2.194.3 | Scalarpmc1008mpAlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.47.2.1.2.194.4 | Scalarpmc1008mpAlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.47.2.1.2.194.5 | Scalarpmc1008mpAlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.47.2.1.2.195 | Nodepmc1008mpAlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.47.2.1.2.195.1 | Scalarpmc1008mpAlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.2 | Scalarpmc1008mpAlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.3 | Scalarpmc1008mpAlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.5 | Scalarpmc1008mpAlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.6 | Scalarpmc1008mpAlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.7 | Scalarpmc1008mpAlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.8 | Scalarpmc1008mpAlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.9 | Scalarpmc1008mpAlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.10 | Scalarpmc1008mpAlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.11 | Scalarpmc1008mpAlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.12 | Scalarpmc1008mpAlmClient4InitFail | read-only | current | Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 4 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.13 | Scalarpmc1008mpAlmClient5InitFail | read-only | current | Client5 Init Fail :This OID indicates that Client 5 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 5 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.14 | Scalarpmc1008mpAlmClient6InitFail | read-only | current | Client6 Init Fail :This OID indicates that Client 6 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 6 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.15 | Scalarpmc1008mpAlmClient7InitFail | read-only | current | Client7 Init Fail :This OID indicates that Client 7 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 7 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.195.16 | Scalarpmc1008mpAlmClient8InitFail | read-only | current | Client8 Init Fail :This OID indicates that Client 8 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 8 is cor… |
| 1.3.6.1.4.1.20044.47.2.1.2.198 | Nodepmc1008mpAlmadddropTsClientRxProt | |||
| 1.3.6.1.4.1.20044.47.2.1.2.198.1 | Scalarpmc1008mpAlmAdddropClient1West | read-only | current | Client 1 West Rx Side Active :This OID indicates the Client #1 is active on West receiving side <Condtype> ADDDROP_CLIENT1_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.2 | Scalarpmc1008mpAlmAdddropClient2West | read-only | current | Client 2 West Rx Side Active :This OID indicates the Client #2 is active on West receiving side <Condtype> ADDDROP_CLIENT2_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.3 | Scalarpmc1008mpAlmAdddropClient3West | read-only | current | Client 3 West Rx Side Active :This OID indicates the Client #3 is active on West receiving side <Condtype> ADDDROP_CLIENT3_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.4 | Scalarpmc1008mpAlmAdddropClient4West | read-only | current | Client 4 West Rx Side Active :This OID indicates the Client #4 is active on West receiving side <Condtype> ADDDROP_CLIENT4_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.5 | Scalarpmc1008mpAlmAdddropClient5West | read-only | current | Client 5 West Rx Side Active :This OID indicates the Client #5 is active on West receiving side <Condtype> ADDDROP_CLIENT5_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.6 | Scalarpmc1008mpAlmAdddropClient6West | read-only | current | Client 6 West Rx Side Active :This OID indicates the Client #6 is active on West receiving side <Condtype> ADDDROP_CLIENT6_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.7 | Scalarpmc1008mpAlmAdddropClient7West | read-only | current | Client 7 West Rx Side Active :This OID indicates the Client #7 is active on West receiving side <Condtype> ADDDROP_CLIENT7_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.8 | Scalarpmc1008mpAlmAdddropClient8West | read-only | current | Client 8 West Rx Side Active :This OID indicates the Client #8 is active on West receiving side <Condtype> ADDDROP_CLIENT8_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.9 | Scalarpmc1008mpAlmAdddropClient1East | read-only | current | Client 1 East Rx Side Active :This OID indicates the Client #1 is active on East receiving side <Condtype> ADDDROP_CLIENT1_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.10 | Scalarpmc1008mpAlmAdddropClient2East | read-only | current | Client 2 East Rx Side Active :This OID indicates the Client #2 is active on East receiving side <Condtype> ADDDROP_CLIENT2_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.11 | Scalarpmc1008mpAlmAdddropClient3East | read-only | current | Client 3 East Rx Side Active :This OID indicates the Client #3 is active on East receiving side <Condtype> ADDDROP_CLIENT3_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.12 | Scalarpmc1008mpAlmAdddropClient4East | read-only | current | Client 4 East Rx Side Active :This OID indicates the Client #4 is active on East receiving side <Condtype> ADDDROP_CLIENT4_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.13 | Scalarpmc1008mpAlmAdddropClient5East | read-only | current | Client 5 East Rx Side Active :This OID indicates the Client #5 is active on East receiving side <Condtype> ADDDROP_CLIENT5_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.14 | Scalarpmc1008mpAlmAdddropClient6East | read-only | current | Client 6 East Rx Side Active :This OID indicates the Client #6 is active on East receiving side <Condtype> ADDDROP_CLIENT6_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.15 | Scalarpmc1008mpAlmAdddropClient7East | read-only | current | Client 7 East Rx Side Active :This OID indicates the Client #7 is active on East receiving side <Condtype> ADDDROP_CLIENT7_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.2.198.16 | Scalarpmc1008mpAlmAdddropClient8East | read-only | current | Client 8 East Rx Side Active :This OID indicates the Client #8 is active on East receiving side <Condtype> ADDDROP_CLIENT8_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.47.2.1.3 | Nodepmc1008mpAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.47.2.1.3.0 | Nodepmc1008mpAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.47.2.1.3.0.9 | Scalarpmc1008mpAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.47.2.1.3.0.15 | Scalarpmc1008mpAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.47.2.1.3.0.16 | Scalarpmc1008mpAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.47.2.2 | Nodepmc1008mpAlmClient | |||
| 1.3.6.1.4.1.20044.47.2.2.1 | Nodepmc1008mpAlmClientNurg | |||
| 1.3.6.1.4.1.20044.47.2.2.1.48 | Tablepmc1008mpAlmsfpWarnDdmTable | not-accessible | current | List of pmc1008mpAlmsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1 | Rowpmc1008mpAlmsfpWarnDdmEntry | not-accessible | current | Row definition for the pmc1008mpAlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.1 | Columnpmc1008mpAlmsfpWarnDdmIndex | read-only | current | Index definition for the pmc1008mpAlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.2 | Columnpmc1008mpAlmTxPwLowWngPortn | read-only | current | Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.3 | Columnpmc1008mpAlmTxPwrHighWngPortn | read-only | current | Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.4 | Columnpmc1008mpAlmTxBiasLowWngPortn | read-only | current | Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.5 | Columnpmc1008mpAlmTxBiasHighWngPortn | read-only | current | Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.6 | Columnpmc1008mpAlmVccLowWngPortn | read-only | current | Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.7 | Columnpmc1008mpAlmVccHighWngPortn | read-only | current | Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.8 | Columnpmc1008mpAlmTempLowWngPortn | read-only | current | Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LO… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.9 | Columnpmc1008mpAlmTempHighWngPortn | read-only | current | Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.16 | Columnpmc1008mpAlmRxPwrLowWngPortn | read-only | current | Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_… |
| 1.3.6.1.4.1.20044.47.2.2.1.48.1.17 | Columnpmc1008mpAlmRxPwrHighWngPortn | read-only | current | Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> R… |
| 1.3.6.1.4.1.20044.47.2.2.2 | Nodepmc1008mpAlmClientUrg | |||
| 1.3.6.1.4.1.20044.47.2.2.2.32 | Tablepmc1008mpAlmsfpAlmDdmTable | not-accessible | current | List of pmc1008mpAlmsfpAlmDdm Article |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1 | Rowpmc1008mpAlmsfpAlmDdmEntry | not-accessible | current | Row definition for the pmc1008mpAlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.1 | Columnpmc1008mpAlmsfpAlmDdmIndex | read-only | current | Index definition for the pmc1008mpAlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.2 | Columnpmc1008mpAlmTxPwrLowAlaPortn | read-only | current | Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_A… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.3 | Columnpmc1008mpAlmTxPwrHighAlaPortn | read-only | current | Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIG… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.4 | Columnpmc1008mpAlmTxBiasLowAlaPortn | read-only | current | Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LO… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.5 | Columnpmc1008mpAlmTxBiasHighAlaPortn | read-only | current | Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.6 | Columnpmc1008mpAlmVccLowAlaPortn | read-only | current | Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.7 | Columnpmc1008mpAlmVccHighAlaPortn | read-only | current | Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HI… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.8 | Columnpmc1008mpAlmTempLowAlaPortn | read-only | current | Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <P… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.9 | Columnpmc1008mpAlmTempHighAlaPortn | read-only | current | Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.16 | Columnpmc1008mpAlmRxPwrLowAlaPortn | read-only | current | Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_AL… |
| 1.3.6.1.4.1.20044.47.2.2.2.32.1.17 | Columnpmc1008mpAlmRxPwrHighAlaPortn | read-only | current | Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH… |
| 1.3.6.1.4.1.20044.47.2.2.3 | Nodepmc1008mpAlmClientCrit | |||
| 1.3.6.1.4.1.20044.47.2.2.3.8 | Tablepmc1008mpAlmsynthAlmPortTable | not-accessible | current | List of pmc1008mpAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1 | Rowpmc1008mpAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pmc1008mpAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.1 | Columnpmc1008mpAlmsynthAlmPortIndex | read-only | current | Index definition for the pmc1008mpAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.2 | Columnpmc1008mpAlmSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. … |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.3 | Columnpmc1008mpAlmDdmAbsentPortn | read-only | current | DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if … |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.5 | Columnpmc1008mpAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16)… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.6 | Columnpmc1008mpAlmDwLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OF… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.7 | Columnpmc1008mpAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.8 | Columnpmc1008mpAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.9 | Columnpmc1008mpAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.10 | Columnpmc1008mpAlmSfpDdmWarningPortn | read-only | current | Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.11 | Columnpmc1008mpAlmSfpDdmAlmPortn | read-only | current | Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.13 | Columnpmc1008mpAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12)… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.16 | Columnpmc1008mpAlmClientActivePortn | read-only | current | Client Sink (Line1 Or Line2) :This bit indicates the Client #n is active on receive side <Help> This status indicates whether the Client is extracted from Line… |
| 1.3.6.1.4.1.20044.47.2.2.3.8.1.17 | Columnpmc1008mpAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.47.2.2.3.16 | Tablepmc1008mpAlmaccessioAlmTable | not-accessible | current | List of pmc1008mpAlmaccessioAlm Article |
| 1.3.6.1.4.1.20044.47.2.2.3.16.1 | Rowpmc1008mpAlmaccessioAlmEntry | not-accessible | current | Row definition for the pmc1008mpAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.47.2.2.3.16.1.1 | Columnpmc1008mpAlmaccessioAlmIndex | read-only | current | Index definition for the pmc1008mpAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.47.2.2.3.16.1.2 | Columnpmc1008mpAlmDwLasFailPortn | read-only | current | Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.47.2.2.3.16.1.5 | Columnpmc1008mpAlmUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.47.2.2.3.72 | Tablepmc1008mpAlmmapperDeAlmTable | not-accessible | current | List of pmc1008mpAlmmapperDeAlm Article |
| 1.3.6.1.4.1.20044.47.2.2.3.72.1 | Rowpmc1008mpAlmmapperDeAlmEntry | not-accessible | current | Row definition for the pmc1008mpAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.47.2.2.3.72.1.1 | Columnpmc1008mpAlmmapperDeAlmIndex | read-only | current | Index definition for the pmc1008mpAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.47.2.2.3.72.1.2 | Columnpmc1008mpAlmUpAccOosPortn | read-only | current | Client Loss Of Synchro :This OID indicates the upstream client input port has lost synchronization on its decoder <Help> This alarms indicates if the input cli… |
| 1.3.6.1.4.1.20044.47.2.2.3.72.1.11 | Columnpmc1008mpAlmUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.47.2.2.3.72.1.12 | Columnpmc1008mpAlmDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.47.2.2.3.72.1.15 | Columnpmc1008mpAlmDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.47.2.3 | Nodepmc1008mpAlmLine | |||
| 1.3.6.1.4.1.20044.47.2.3.1 | Nodepmc1008mpAlmLineNurg | |||
| 1.3.6.1.4.1.20044.47.2.3.1.209 | Tablepmc1008mpAlmlineXfp1WarningsTable | not-accessible | current | List of pmc1008mpAlmlineXfp1Warnings Article |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1 | Rowpmc1008mpAlmlineXfp1WarningsEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.1 | Columnpmc1008mpAlmlineXfp1WarningsIndex | read-only | current | Index definition for the pmc1008mpAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.2 | Columnpmc1008mpAlmTxPowerLowWarningPortn | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.3 | Columnpmc1008mpAlmTxPowerHighWarningPortn | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.4 | Columnpmc1008mpAlmTxBiasLowWarningPortn | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.5 | Columnpmc1008mpAlmTxBiasHighWarningPortn | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.8 | Columnpmc1008mpAlmTempLowWarningPortn | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> T… |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.9 | Columnpmc1008mpAlmTempHighWarningPortn | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEM… |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.16 | Columnpmc1008mpAlmRxPowerLowWarningPortn | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.47.2.3.1.209.1.17 | Columnpmc1008mpAlmRxPowerHighWarningPortn | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.47.2.3.1.225 | Tablepmc1008mpAlmlineOtx1TlhWarningsTable | not-accessible | current | List of pmc1008mpAlmlineOtx1TlhWarnings Article |
| 1.3.6.1.4.1.20044.47.2.3.1.225.1 | Rowpmc1008mpAlmlineOtx1TlhWarningsEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.47.2.3.1.225.1.1 | Columnpmc1008mpAlmlineOtx1TlhWarningsIndex | read-only | current | Index definition for the pmc1008mpAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.47.2.3.1.225.1.6 | Columnpmc1008mpAlmLineModulatorAgingHighWarningPortn | read-only | current | Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODUL… |
| 1.3.6.1.4.1.20044.47.2.3.1.225.1.7 | Columnpmc1008mpAlmLineAgingHighWarningPortn | read-only | current | Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.47.2.3.1.225.1.13 | Columnpmc1008mpAlmLineFreqDevHighWarningPortn | read-only | current | Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_F… |
| 1.3.6.1.4.1.20044.47.2.3.1.225.1.15 | Columnpmc1008mpAlmLineLaserTempHighWarningPortn | read-only | current | Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_T… |
| 1.3.6.1.4.1.20044.47.2.3.2 | Nodepmc1008mpAlmLineUrg | |||
| 1.3.6.1.4.1.20044.47.2.3.2.129 | Tablepmc1008mpAlmdfrmBerTable | not-accessible | current | List of pmc1008mpAlmdfrmBer Article |
| 1.3.6.1.4.1.20044.47.2.3.2.129.1 | Rowpmc1008mpAlmdfrmBerEntry | not-accessible | current | Row definition for the pmc1008mpAlmdfrmBer table |
| 1.3.6.1.4.1.20044.47.2.3.2.129.1.1 | Columnpmc1008mpAlmdfrmBerIndex | read-only | current | Index definition for the pmc1008mpAlmdfrmBer table |
| 1.3.6.1.4.1.20044.47.2.3.2.129.1.2 | Columnpmc1008mpAlmLineSignalDegradePortn | read-only | current | Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA… |
| 1.3.6.1.4.1.20044.47.2.3.2.129.1.3 | Columnpmc1008mpAlmLineSignalFailPortn | read-only | current | Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F… |
| 1.3.6.1.4.1.20044.47.2.3.2.129.1.6 | Columnpmc1008mpAlmLineDegradePortn | read-only | current | Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio… |
| 1.3.6.1.4.1.20044.47.2.3.2.208 | Tablepmc1008mpAlmlineXfp1AlarmTable | not-accessible | current | List of pmc1008mpAlmlineXfp1Alarm Article |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1 | Rowpmc1008mpAlmlineXfp1AlarmEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.1 | Columnpmc1008mpAlmlineXfp1AlarmIndex | read-only | current | Index definition for the pmc1008mpAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.2 | Columnpmc1008mpAlmTxPowerLowAlarmPortn | read-only | current | Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.3 | Columnpmc1008mpAlmTxPowerHighAlarmPortn | read-only | current | Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.4 | Columnpmc1008mpAlmTxBiasLowAlarmPortn | read-only | current | Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Co… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.5 | Columnpmc1008mpAlmTxBiasHighAlarmPortn | read-only | current | Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Cond… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.8 | Columnpmc1008mpAlmTempLowAlarmPortn | read-only | current | Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_AL… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.9 | Columnpmc1008mpAlmTempHighAlarmPortn | read-only | current | Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALA… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.16 | Columnpmc1008mpAlmRxPowerLowAlarmPortn | read-only | current | Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER… |
| 1.3.6.1.4.1.20044.47.2.3.2.208.1.17 | Columnpmc1008mpAlmRxPowerHighAlarmPortn | read-only | current | Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POW… |
| 1.3.6.1.4.1.20044.47.2.3.2.212 | Tablepmc1008mpAlmlineXfp1SupplyAlarmTable | not-accessible | current | List of pmc1008mpAlmlineXfp1SupplyAlarm Article |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1 | Rowpmc1008mpAlmlineXfp1SupplyAlarmEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.1 | Columnpmc1008mpAlmlineXfp1SupplyAlarmIndex | read-only | current | Index definition for the pmc1008mpAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.2 | Columnpmc1008mpAlmVee5LowAlarmPortn | read-only | current | VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.3 | Columnpmc1008mpAlmVee5HighAlarmPortn | read-only | current | VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.4 | Columnpmc1008mpAlmVcc2LowAlarmPortn | read-only | current | VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.5 | Columnpmc1008mpAlmVcc2HighAlarmPortn | read-only | current | VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.6 | Columnpmc1008mpAlmVcc3LowAlarmPortn | read-only | current | VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.7 | Columnpmc1008mpAlmVcc3HighAlarmPortn | read-only | current | VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.8 | Columnpmc1008mpAlmVcc5LowAlarmPortn | read-only | current | VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.9 | Columnpmc1008mpAlmVcc5HighAlarmPortn | read-only | current | VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.10 | Columnpmc1008mpAlmVee5LowWarningPortn | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.11 | Columnpmc1008mpAlmVee5HighWarningPortn | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.12 | Columnpmc1008mpAlmVcc2LowWarningPortn | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.13 | Columnpmc1008mpAlmVcc2HighWarningPortn | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.14 | Columnpmc1008mpAlmVcc3LowWarningPortn | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.15 | Columnpmc1008mpAlmVcc3HighWarningPortn | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.16 | Columnpmc1008mpAlmVcc5LowWarningPortn | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.47.2.3.2.212.1.17 | Columnpmc1008mpAlmVcc5HighWarningPortn | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.47.2.3.2.224 | Tablepmc1008mpAlmlineOtx1TlhAlarmsTable | not-accessible | current | List of pmc1008mpAlmlineOtx1TlhAlarms Article |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1 | Rowpmc1008mpAlmlineOtx1TlhAlarmsEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1.1 | Columnpmc1008mpAlmlineOtx1TlhAlarmsIndex | read-only | current | Index definition for the pmc1008mpAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1.6 | Columnpmc1008mpAlmLineModulatorAgingHighAlaPortn | read-only | current | Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR… |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1.7 | Columnpmc1008mpAlmLineAgingHighAlaPortn | read-only | current | Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Pro… |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1.10 | Columnpmc1008mpAlmLineCdrNotReadyPortn | read-only | current | CDR Not Ready :This OID indicates the Clock Data Recovery unit is not yet initialized. <Help> This alarm indicates the Clock Data Recovery unit is not yet init… |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1.13 | Columnpmc1008mpAlmLineFreqDevHighAlaPortn | read-only | current | Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_… |
| 1.3.6.1.4.1.20044.47.2.3.2.224.1.15 | Columnpmc1008mpAlmLineLaserTempHighAlaPortn | read-only | current | Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_… |
| 1.3.6.1.4.1.20044.47.2.3.3 | Nodepmc1008mpAlmLineCrit | |||
| 1.3.6.1.4.1.20044.47.2.3.3.7 | Tablepmc1008mpAlmsynthAlmLineTable | not-accessible | current | List of pmc1008mpAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1 | Rowpmc1008mpAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pmc1008mpAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.1 | Columnpmc1008mpAlmsynthAlmLineIndex | read-only | current | Index definition for the pmc1008mpAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.2 | Columnpmc1008mpAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.3 | Columnpmc1008mpAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver … |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.5 | Columnpmc1008mpAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.6 | Columnpmc1008mpAlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or … |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.7 | Columnpmc1008mpAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.9 | Columnpmc1008mpAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.10 | Columnpmc1008mpAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warni… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.11 | Columnpmc1008mpAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm ha… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.13 | Columnpmc1008mpAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.47.2.3.3.7.1.17 | Columnpmc1008mpAlmLineActivePortn | read-only | current | Line Active :This bit indicates the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIV… |
| 1.3.6.1.4.1.20044.47.2.3.3.128 | Tablepmc1008mpAlmdfrmAlmTable | not-accessible | current | List of pmc1008mpAlmdfrmAlm Article |
| 1.3.6.1.4.1.20044.47.2.3.3.128.1 | Rowpmc1008mpAlmdfrmAlmEntry | not-accessible | current | Row definition for the pmc1008mpAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.47.2.3.3.128.1.1 | Columnpmc1008mpAlmdfrmAlmIndex | read-only | current | Index definition for the pmc1008mpAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.47.2.3.3.128.1.2 | Columnpmc1008mpAlmDwAisDetPortn | read-only | current | MS-AIS/L-AIS Detected On Line Input :This OID indicates that an MS-AIS has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.47.2.3.3.128.1.3 | Columnpmc1008mpAlmDwRdiDetPortn | read-only | current | MS-RDI/L-RDI Detected On Line Input :This OID indicates that an MS-RDI has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.47.2.3.3.128.1.4 | Columnpmc1008mpAlmDwOofPortn | read-only | current | SONET/SDH Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.47.2.3.3.128.1.5 | Columnpmc1008mpAlmDwLofPortn | read-only | current | SONET/SDH Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if … |
| 1.3.6.1.4.1.20044.47.2.3.3.133 | Tablepmc1008mpAlmlineSyncAlarmsTable | not-accessible | current | List of pmc1008mpAlmlineSyncAlarms Article |
| 1.3.6.1.4.1.20044.47.2.3.3.133.1 | Rowpmc1008mpAlmlineSyncAlarmsEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.47.2.3.3.133.1.1 | Columnpmc1008mpAlmlineSyncAlarmsIndex | read-only | current | Index definition for the pmc1008mpAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.47.2.3.3.133.1.13 | Columnpmc1008mpAlmDwLockerrPortn | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFail… |
| 1.3.6.1.4.1.20044.47.2.3.3.133.1.14 | Columnpmc1008mpAlmUpLockerrPortn | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receive… |
| 1.3.6.1.4.1.20044.47.2.3.3.133.1.17 | Columnpmc1008mpAlmDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.47.2.3.3.211 | Tablepmc1008mpAlmlineXfp1AlarmsTable | not-accessible | current | List of pmc1008mpAlmlineXfp1Alarms Article |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1 | Rowpmc1008mpAlmlineXfp1AlarmsEntry | not-accessible | current | Row definition for the pmc1008mpAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.1 | Columnpmc1008mpAlmlineXfp1AlarmsIndex | read-only | current | Index definition for the pmc1008mpAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.3 | Columnpmc1008mpAlmModNrPortn | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.4 | Columnpmc1008mpAlmRxCdrNotLockedPortn | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.6 | Columnpmc1008mpAlmRxNrPortn | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.7 | Columnpmc1008mpAlmTxCdrNotLockedPortn | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.8 | Columnpmc1008mpAlmTxFaultPortn | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.9 | Columnpmc1008mpAlmTxNrPortn | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.11 | Columnpmc1008mpAlmChannelNotAcquiredPortn | read-only | current | DWDM Channel Not Acquired :This OID indicates the transceiver didn't tune the DWDM Channel succesfully. <Help> This status indicates the transceiver has not tu… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.15 | Columnpmc1008mpAlmWavelengthUnlockedPortn | read-only | current | Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wa… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.16 | Columnpmc1008mpAlmTecFaultPortn | read-only | current | Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail con… |
| 1.3.6.1.4.1.20044.47.2.3.3.211.1.17 | Columnpmc1008mpAlmApdSupplyFaultPortn | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.47.3 | Nodepmc1008mpmeasures | |||
| 1.3.6.1.4.1.20044.47.3.1 | Nodepmc1008mpMesrOther | |||
| 1.3.6.1.4.1.20044.47.3.1.0 | Scalarpmc1008mpMesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.47.3.1.1 | Scalarpmc1008mpMesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.47.3.2 | Nodepmc1008mpMesrClient | |||
| 1.3.6.1.4.1.20044.47.3.2.16 | Tablepmc1008mpMesrtempMeasTable | not-accessible | current | List of pmc1008mpMesrtempMeas Article |
| 1.3.6.1.4.1.20044.47.3.2.16.1 | Rowpmc1008mpMesrtempMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrtempMeas table |
| 1.3.6.1.4.1.20044.47.3.2.16.1.1 | Columnpmc1008mpMesrtempMeasIndex | read-only | current | Index definition for the pmc1008mpMesrtempMeas table |
| 1.3.6.1.4.1.20044.47.3.2.16.1.2 | Columnpmc1008mpMesrtempMeasPortn | read-only | current | Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/25… |
| 1.3.6.1.4.1.20044.47.3.2.24 | Tablepmc1008mpMesrvoltMeasTable | not-accessible | current | List of pmc1008mpMesrvoltMeas Article |
| 1.3.6.1.4.1.20044.47.3.2.24.1 | Rowpmc1008mpMesrvoltMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrvoltMeas table |
| 1.3.6.1.4.1.20044.47.3.2.24.1.1 | Columnpmc1008mpMesrvoltMeasIndex | read-only | current | Index definition for the pmc1008mpMesrvoltMeas table |
| 1.3.6.1.4.1.20044.47.3.2.24.1.2 | Columnpmc1008mpMesrvoltMeasPortn | read-only | current | Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/100… |
| 1.3.6.1.4.1.20044.47.3.2.32 | Tablepmc1008mpMesrbiasMeasTable | not-accessible | current | List of pmc1008mpMesrbiasMeas Article |
| 1.3.6.1.4.1.20044.47.3.2.32.1 | Rowpmc1008mpMesrbiasMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrbiasMeas table |
| 1.3.6.1.4.1.20044.47.3.2.32.1.1 | Columnpmc1008mpMesrbiasMeasIndex | read-only | current | Index definition for the pmc1008mpMesrbiasMeas table |
| 1.3.6.1.4.1.20044.47.3.2.32.1.2 | Columnpmc1008mpMesrbiasMeasPortn | read-only | current | Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.47.3.2.40 | Tablepmc1008mpMesrtxpwrMeasTable | not-accessible | current | List of pmc1008mpMesrtxpwrMeas Article |
| 1.3.6.1.4.1.20044.47.3.2.40.1 | Rowpmc1008mpMesrtxpwrMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.47.3.2.40.1.1 | Columnpmc1008mpMesrtxpwrMeasIndex | read-only | current | Index definition for the pmc1008mpMesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.47.3.2.40.1.2 | Columnpmc1008mpMesrtxpwrMeasPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV… |
| 1.3.6.1.4.1.20044.47.3.2.48 | Tablepmc1008mpMesrrxpwrMeasTable | not-accessible | current | List of pmc1008mpMesrrxpwrMeas Article |
| 1.3.6.1.4.1.20044.47.3.2.48.1 | Rowpmc1008mpMesrrxpwrMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.47.3.2.48.1.1 | Columnpmc1008mpMesrrxpwrMeasIndex | read-only | current | Index definition for the pmc1008mpMesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.47.3.2.48.1.2 | Columnpmc1008mpMesrrxpwrMeasPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-4… |
| 1.3.6.1.4.1.20044.47.3.3 | Nodepmc1008mpMesrLine | |||
| 1.3.6.1.4.1.20044.47.3.3.208 | Tablepmc1008mpMesrxfp1LxModTempMeasTable | not-accessible | current | List of pmc1008mpMesrxfp1LxModTempMeas Article |
| 1.3.6.1.4.1.20044.47.3.3.208.1 | Rowpmc1008mpMesrxfp1LxModTempMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.47.3.3.208.1.1 | Columnpmc1008mpMesrxfp1LxModTempMeasIndex | read-only | current | Index definition for the pmc1008mpMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.47.3.3.208.1.2 | Columnpmc1008mpMesrxfp1LxModTempMeasPortn | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Tempera… |
| 1.3.6.1.4.1.20044.47.3.3.209 | Tablepmc1008mpMesrxfp1ReservedTable | not-accessible | deprecated | List of pmc1008mpMesrxfp1Reserved Article |
| 1.3.6.1.4.1.20044.47.3.3.209.1 | Rowpmc1008mpMesrxfp1ReservedEntry | not-accessible | deprecated | Row definition for the pmc1008mpMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.47.3.3.209.1.1 | Columnpmc1008mpMesrxfp1ReservedIndex | read-only | deprecated | Index definition for the pmc1008mpMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.47.3.3.209.1.2 | Columnpmc1008mpMesrxfp1ReservedPortn | read-only | deprecated | Not Used :Reserved |
| 1.3.6.1.4.1.20044.47.3.3.210 | Tablepmc1008mpMesrxfp1LoBiasCurrentMeasTable | not-accessible | current | List of pmc1008mpMesrxfp1LoBiasCurrentMeas Article |
| 1.3.6.1.4.1.20044.47.3.3.210.1 | Rowpmc1008mpMesrxfp1LoBiasCurrentMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.47.3.3.210.1.1 | Columnpmc1008mpMesrxfp1LoBiasCurrentMeasIndex | read-only | current | Index definition for the pmc1008mpMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.47.3.3.210.1.2 | Columnpmc1008mpMesrxfp1LoBiasCurrentMeasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.47.3.3.211 | Tablepmc1008mpMesrxfp1LoTxPowerMeasTable | not-accessible | current | List of pmc1008mpMesrxfp1LoTxPowerMeas Article |
| 1.3.6.1.4.1.20044.47.3.3.211.1 | Rowpmc1008mpMesrxfp1LoTxPowerMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.47.3.3.211.1.1 | Columnpmc1008mpMesrxfp1LoTxPowerMeasIndex | read-only | current | Index definition for the pmc1008mpMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.47.3.3.211.1.2 | Columnpmc1008mpMesrxfp1LoTxPowerMeasPortn | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.47.3.3.212 | Tablepmc1008mpMesrxfp1LiRxPowerMeasTable | not-accessible | current | List of pmc1008mpMesrxfp1LiRxPowerMeas Article |
| 1.3.6.1.4.1.20044.47.3.3.212.1 | Rowpmc1008mpMesrxfp1LiRxPowerMeasEntry | not-accessible | current | Row definition for the pmc1008mpMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.47.3.3.212.1.1 | Columnpmc1008mpMesrxfp1LiRxPowerMeasIndex | read-only | current | Index definition for the pmc1008mpMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.47.3.3.212.1.2 | Columnpmc1008mpMesrxfp1LiRxPowerMeasPortn | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (P… |
| 1.3.6.1.4.1.20044.47.3.3.213 | Tablepmc1008mpMesrxfp1LxAux1MeasTable | not-accessible | deprecated | List of pmc1008mpMesrxfp1LxAux1Meas Article |
| 1.3.6.1.4.1.20044.47.3.3.213.1 | Rowpmc1008mpMesrxfp1LxAux1MeasEntry | not-accessible | deprecated | Row definition for the pmc1008mpMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.47.3.3.213.1.1 | Columnpmc1008mpMesrxfp1LxAux1MeasIndex | read-only | deprecated | Index definition for the pmc1008mpMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.47.3.3.213.1.2 | Columnpmc1008mpMesrxfp1LxAux1MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.47.3.3.214 | Tablepmc1008mpMesrxfp1LxAux2MeasTable | not-accessible | deprecated | List of pmc1008mpMesrxfp1LxAux2Meas Article |
| 1.3.6.1.4.1.20044.47.3.3.214.1 | Rowpmc1008mpMesrxfp1LxAux2MeasEntry | not-accessible | deprecated | Row definition for the pmc1008mpMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.47.3.3.214.1.1 | Columnpmc1008mpMesrxfp1LxAux2MeasIndex | read-only | deprecated | Index definition for the pmc1008mpMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.47.3.3.214.1.2 | Columnpmc1008mpMesrxfp1LxAux2MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.47.3.3.224 | Tablepmc1008mpMesrotx1AgingTable | not-accessible | current | List of pmc1008mpMesrotx1Aging Article |
| 1.3.6.1.4.1.20044.47.3.3.224.1 | Rowpmc1008mpMesrotx1AgingEntry | not-accessible | current | Row definition for the pmc1008mpMesrotx1Aging table |
| 1.3.6.1.4.1.20044.47.3.3.224.1.1 | Columnpmc1008mpMesrotx1AgingIndex | read-only | current | Index definition for the pmc1008mpMesrotx1Aging table |
| 1.3.6.1.4.1.20044.47.3.3.224.1.2 | Columnpmc1008mpMesrotx1AgingPortn | read-only | current | Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure… |
| 1.3.6.1.4.1.20044.47.3.3.225 | Tablepmc1008mpMesrotx1LaserTemperatureTable | not-accessible | deprecated | List of pmc1008mpMesrotx1LaserTemperature Article |
| 1.3.6.1.4.1.20044.47.3.3.225.1 | Rowpmc1008mpMesrotx1LaserTemperatureEntry | not-accessible | deprecated | Row definition for the pmc1008mpMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.47.3.3.225.1.1 | Columnpmc1008mpMesrotx1LaserTemperatureIndex | read-only | deprecated | Index definition for the pmc1008mpMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.47.3.3.225.1.2 | Columnpmc1008mpMesrotx1LaserTemperaturePortn | read-only | deprecated | Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.47.3.3.226 | Tablepmc1008mpMesrotx1FreqDeviationTable | not-accessible | current | List of pmc1008mpMesrotx1FreqDeviation Article |
| 1.3.6.1.4.1.20044.47.3.3.226.1 | Rowpmc1008mpMesrotx1FreqDeviationEntry | not-accessible | current | Row definition for the pmc1008mpMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.47.3.3.226.1.1 | Columnpmc1008mpMesrotx1FreqDeviationIndex | read-only | current | Index definition for the pmc1008mpMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.47.3.3.226.1.2 | Columnpmc1008mpMesrotx1FreqDeviationPortn | read-only | current | Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (A… |
| 1.3.6.1.4.1.20044.47.3.3.227 | Tablepmc1008mpMesrotx1LaserWvlengthTable | not-accessible | current | List of pmc1008mpMesrotx1LaserWvlength Article |
| 1.3.6.1.4.1.20044.47.3.3.227.1 | Rowpmc1008mpMesrotx1LaserWvlengthEntry | not-accessible | current | Row definition for the pmc1008mpMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.47.3.3.227.1.1 | Columnpmc1008mpMesrotx1LaserWvlengthIndex | read-only | current | Index definition for the pmc1008mpMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.47.3.3.227.1.2 | Columnpmc1008mpMesrotx1LaserWvlengthPortn | read-only | current | Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=29979245… |
| 1.3.6.1.4.1.20044.47.4 | Nodepmc1008mpcounters | |||
| 1.3.6.1.4.1.20044.47.4.1 | Nodepmc1008mpCntOther | |||
| 1.3.6.1.4.1.20044.47.4.2 | Nodepmc1008mpCntClient | |||
| 1.3.6.1.4.1.20044.47.4.2.16 | Tablepmc1008mpCntupRaRemCntTable | not-accessible | current | List of pmc1008mpCntupRaRemCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.16.1 | Rowpmc1008mpCntupRaRemCntEntry | not-accessible | current | Row definition for the pmc1008mpCntupRaRemCnt table |
| 1.3.6.1.4.1.20044.47.4.2.16.1.1 | Columnpmc1008mpCntupRaRemCntIndex | read-only | current | Index definition for the pmc1008mpCntupRaRemCnt table |
| 1.3.6.1.4.1.20044.47.4.2.16.1.2 | Columnpmc1008mpCntupRaRemCntValuePortn | read-only | current | Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
| 1.3.6.1.4.1.20044.47.4.2.16.1.3 | Columnpmc1008mpCntupRaRemCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.16.1.4 | Columnpmc1008mpCntupRaRemCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.2.24 | Tablepmc1008mpCntupRaInsCntTable | not-accessible | current | List of pmc1008mpCntupRaInsCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.24.1 | Rowpmc1008mpCntupRaInsCntEntry | not-accessible | current | Row definition for the pmc1008mpCntupRaInsCnt table |
| 1.3.6.1.4.1.20044.47.4.2.24.1.1 | Columnpmc1008mpCntupRaInsCntIndex | read-only | current | Index definition for the pmc1008mpCntupRaInsCnt table |
| 1.3.6.1.4.1.20044.47.4.2.24.1.2 | Columnpmc1008mpCntupRaInsCntValuePortn | read-only | current | Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
| 1.3.6.1.4.1.20044.47.4.2.24.1.3 | Columnpmc1008mpCntupRaInsCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.24.1.4 | Columnpmc1008mpCntupRaInsCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.2.32 | Tablepmc1008mpCntupRdErrCntTable | not-accessible | current | List of pmc1008mpCntupRdErrCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.32.1 | Rowpmc1008mpCntupRdErrCntEntry | not-accessible | current | Row definition for the pmc1008mpCntupRdErrCnt table |
| 1.3.6.1.4.1.20044.47.4.2.32.1.1 | Columnpmc1008mpCntupRdErrCntIndex | read-only | current | Index definition for the pmc1008mpCntupRdErrCnt table |
| 1.3.6.1.4.1.20044.47.4.2.32.1.2 | Columnpmc1008mpCntupRdErrCntValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.47.4.2.32.1.3 | Columnpmc1008mpCntupRdErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.32.1.4 | Columnpmc1008mpCntupRdErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.2.40 | Tablepmc1008mpCntupTimCntTable | not-accessible | current | List of pmc1008mpCntupTimCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.40.1 | Rowpmc1008mpCntupTimCntEntry | not-accessible | current | Row definition for the pmc1008mpCntupTimCnt table |
| 1.3.6.1.4.1.20044.47.4.2.40.1.1 | Columnpmc1008mpCntupTimCntIndex | read-only | current | Index definition for the pmc1008mpCntupTimCnt table |
| 1.3.6.1.4.1.20044.47.4.2.40.1.2 | Columnpmc1008mpCntupTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.47.4.2.40.1.3 | Columnpmc1008mpCntupTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.40.1.4 | Columnpmc1008mpCntupTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.2.48 | Tablepmc1008mpCntupCvErrCntTable | not-accessible | current | List of pmc1008mpCntupCvErrCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.48.1 | Rowpmc1008mpCntupCvErrCntEntry | not-accessible | current | Row definition for the pmc1008mpCntupCvErrCnt table |
| 1.3.6.1.4.1.20044.47.4.2.48.1.1 | Columnpmc1008mpCntupCvErrCntIndex | read-only | current | Index definition for the pmc1008mpCntupCvErrCnt table |
| 1.3.6.1.4.1.20044.47.4.2.48.1.2 | Columnpmc1008mpCntupCvErrCntValuePortn | read-only | current | Client Coding Violation Counter :This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
| 1.3.6.1.4.1.20044.47.4.2.48.1.3 | Columnpmc1008mpCntupCvErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the coding violation counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.48.1.4 | Columnpmc1008mpCntupCvErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a coding violation counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.2.64 | Tablepmc1008mpCntdwCbipCntTable | not-accessible | current | List of pmc1008mpCntdwCbipCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.64.1 | Rowpmc1008mpCntdwCbipCntEntry | not-accessible | current | Row definition for the pmc1008mpCntdwCbipCnt table |
| 1.3.6.1.4.1.20044.47.4.2.64.1.1 | Columnpmc1008mpCntdwCbipCntIndex | read-only | current | Index definition for the pmc1008mpCntdwCbipCnt table |
| 1.3.6.1.4.1.20044.47.4.2.64.1.2 | Columnpmc1008mpCntdwCbipCntValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.47.4.2.64.1.3 | Columnpmc1008mpCntdwCbipCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.64.1.4 | Columnpmc1008mpCntdwCbipCntOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.2.72 | Tablepmc1008mpCntdwTimCntTable | not-accessible | current | List of pmc1008mpCntdwTimCnt Article |
| 1.3.6.1.4.1.20044.47.4.2.72.1 | Rowpmc1008mpCntdwTimCntEntry | not-accessible | current | Row definition for the pmc1008mpCntdwTimCnt table |
| 1.3.6.1.4.1.20044.47.4.2.72.1.1 | Columnpmc1008mpCntdwTimCntIndex | read-only | current | Index definition for the pmc1008mpCntdwTimCnt table |
| 1.3.6.1.4.1.20044.47.4.2.72.1.2 | Columnpmc1008mpCntdwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.47.4.2.72.1.3 | Columnpmc1008mpCntdwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.2.72.1.4 | Columnpmc1008mpCntdwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.3 | Nodepmc1008mpCntLine | |||
| 1.3.6.1.4.1.20044.47.4.3.152 | Tablepmc1008mpCntdfrmB1ErrCntTable | not-accessible | current | List of pmc1008mpCntdfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.47.4.3.152.1 | Rowpmc1008mpCntdfrmB1ErrCntEntry | not-accessible | current | Row definition for the pmc1008mpCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.47.4.3.152.1.1 | Columnpmc1008mpCntdfrmB1ErrCntIndex | read-only | current | Index definition for the pmc1008mpCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.47.4.3.152.1.2 | Columnpmc1008mpCntdfrmB1ErrCntValuePortn | read-only | current | Line Input B1 Errors :This counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 err… |
| 1.3.6.1.4.1.20044.47.4.3.152.1.3 | Columnpmc1008mpCntdfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.3.152.1.4 | Columnpmc1008mpCntdfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.3.153 | Tablepmc1008mpCntdfrmTimCntTable | not-accessible | current | List of pmc1008mpCntdfrmTimCnt Article |
| 1.3.6.1.4.1.20044.47.4.3.153.1 | Rowpmc1008mpCntdfrmTimCntEntry | not-accessible | current | Row definition for the pmc1008mpCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.47.4.3.153.1.1 | Columnpmc1008mpCntdfrmTimCntIndex | read-only | current | Index definition for the pmc1008mpCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.47.4.3.153.1.2 | Columnpmc1008mpCntdfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.47.4.3.153.1.3 | Columnpmc1008mpCntdfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.47.4.3.153.1.4 | Columnpmc1008mpCntdfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.47.4.3.154 | Tablepmc1008mpCntdfrmPrimLineErrCntTable | not-accessible | current | List of pmc1008mpCntdfrmPrimLineErrCnt Article |
| 1.3.6.1.4.1.20044.47.4.3.154.1 | Rowpmc1008mpCntdfrmPrimLineErrCntEntry | not-accessible | current | Row definition for the pmc1008mpCntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.47.4.3.154.1.1 | Columnpmc1008mpCntdfrmPrimLineErrCntIndex | read-only | current | Index definition for the pmc1008mpCntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.47.4.3.154.1.2 | Columnpmc1008mpCntdfrmPrimLineErrCntValuePortn | read-only | current | Line Input FEC Corrected Errors :This counter is incremented each time the FEC is correcting an error on the line input stream. <Help> This counter gives the n… |
| 1.3.6.1.4.1.20044.47.4.3.154.1.3 | Columnpmc1008mpCntdfrmPrimLineErrCntErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.47.4.3.154.1.4 | Columnpmc1008mpCntdfrmPrimLineErrCntOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.47.4.259 | Scalarpmc1008mpCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.47.4.260 | Scalarpmc1008mpCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.47.6 | Nodepmc1008mpcontrolsWrite | |||
| 1.3.6.1.4.1.20044.47.6.1 | Nodepmc1008mpCtrlOther | |||
| 1.3.6.1.4.1.20044.47.6.1.1 | Nodepmc1008mpCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.47.6.1.1.1 | Scalarpmc1008mpCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.47.6.1.1.2 | Scalarpmc1008mpCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.47.6.1.1.10 | Scalarpmc1008mpCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.47.6.1.1.14 | Scalarpmc1008mpCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.47.6.1.4 | Nodepmc1008mpCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.47.6.1.4.1 | Scalarpmc1008mpCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.47.6.1.4.2 | Scalarpmc1008mpCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.47.6.1.5 | Nodepmc1008mpCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.47.6.1.5.2 | Scalarpmc1008mpCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.47.6.1.5.3 | Scalarpmc1008mpCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.47.6.1.5.5 | Scalarpmc1008mpCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.47.6.1.5.6 | Scalarpmc1008mpCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.47.6.1.6 | Nodepmc1008mpCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.47.6.1.6.1 | Scalarpmc1008mpCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.47.6.1.6.5 | Scalarpmc1008mpCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.47.6.1.6.6 | Scalarpmc1008mpCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.47.6.1.6.7 | Scalarpmc1008mpCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.47.6.1.6.8 | Scalarpmc1008mpCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.47.6.1.192 | Nodepmc1008mpCtrlledTest | |||
| 1.3.6.1.4.1.20044.47.6.1.192.1 | Scalarpmc1008mpCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.47.6.1.192.2 | Scalarpmc1008mpCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.47.6.1.192.3 | Scalarpmc1008mpCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.47.6.1.193 | Nodepmc1008mpCtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.47.6.1.193.1 | Scalarpmc1008mpCtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.47.6.1.196 | Scalarpmc1008mpCtrlmoduleDccMgnt | read-write | current | DCC Mode :This OID defines the DCC mode of the PM (No DCC, Master, Slave Line 1&2, Terminal Line 1, Terminal Line 2, Terminal Line 1&2) <Help> This control def… |
| 1.3.6.1.4.1.20044.47.6.1.197 | Nodepmc1008mpCtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.47.6.1.197.1 | Scalarpmc1008mpCtrlMaintenanceMode | read-write | current | Enable Maintenance :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.47.6.2 | Nodepmc1008mpCtrlClient | |||
| 1.3.6.1.4.1.20044.47.6.2.16 | Tablepmc1008mpCtrlaccessLoopTable | not-accessible | current | List of pmc1008mpCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.47.6.2.16.1 | Rowpmc1008mpCtrlaccessLoopEntry | not-accessible | current | Row definition for the pmc1008mpCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.47.6.2.16.1.1 | Columnpmc1008mpCtrlaccessLoopIndex | read-only | current | Index definition for the pmc1008mpCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.47.6.2.16.1.2 | Columnpmc1008mpCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.47.6.2.18 | Tablepmc1008mpCtrlportOosModeTable | not-accessible | current | List of pmc1008mpCtrlportOosMode Article |
| 1.3.6.1.4.1.20044.47.6.2.18.1 | Rowpmc1008mpCtrlportOosModeEntry | not-accessible | current | Row definition for the pmc1008mpCtrlportOosMode table |
| 1.3.6.1.4.1.20044.47.6.2.18.1.1 | Columnpmc1008mpCtrlportOosModeIndex | read-only | current | Index definition for the pmc1008mpCtrlportOosMode table |
| 1.3.6.1.4.1.20044.47.6.2.18.1.2 | Columnpmc1008mpCtrlportOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.47.6.2.19 | Tablepmc1008mpCtrlsfpOnCtrlTable | not-accessible | current | List of pmc1008mpCtrlsfpOnCtrl Article |
| 1.3.6.1.4.1.20044.47.6.2.19.1 | Rowpmc1008mpCtrlsfpOnCtrlEntry | not-accessible | current | Row definition for the pmc1008mpCtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.47.6.2.19.1.1 | Columnpmc1008mpCtrlsfpOnCtrlIndex | read-only | current | Index definition for the pmc1008mpCtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.47.6.2.19.1.2 | Columnpmc1008mpCtrlsfpOnCtrlPortn | read-write | current | Client SFP Optical Laser ON :This OID switches on the SFP. |
| 1.3.6.1.4.1.20044.47.6.2.20 | Tablepmc1008mpCtrlsfpOffCtrlTable | not-accessible | current | List of pmc1008mpCtrlsfpOffCtrl Article |
| 1.3.6.1.4.1.20044.47.6.2.20.1 | Rowpmc1008mpCtrlsfpOffCtrlEntry | not-accessible | current | Row definition for the pmc1008mpCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.47.6.2.20.1.1 | Columnpmc1008mpCtrlsfpOffCtrlIndex | read-only | current | Index definition for the pmc1008mpCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.47.6.2.20.1.2 | Columnpmc1008mpCtrlsfpOffCtrlPortn | read-write | current | Client SFP Optical Laser OFF :This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.47.6.2.21 | Tablepmc1008mpCtrlcsfUpInsTable | not-accessible | current | List of pmc1008mpCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.47.6.2.21.1 | Rowpmc1008mpCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pmc1008mpCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.47.6.2.21.1.1 | Columnpmc1008mpCtrlcsfUpInsIndex | read-only | current | Index definition for the pmc1008mpCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.47.6.2.21.1.2 | Columnpmc1008mpCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.47.6.2.22 | Tablepmc1008mpCtrlcaisDwInsTable | not-accessible | current | List of pmc1008mpCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.47.6.2.22.1 | Rowpmc1008mpCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pmc1008mpCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.47.6.2.22.1.1 | Columnpmc1008mpCtrlcaisDwInsIndex | read-only | current | Index definition for the pmc1008mpCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.47.6.2.22.1.2 | Columnpmc1008mpCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.47.6.2.26 | Tablepmc1008mpCtrlclientAccessTermLoopTable | not-accessible | current | List of pmc1008mpCtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.47.6.2.26.1 | Rowpmc1008mpCtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pmc1008mpCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.47.6.2.26.1.1 | Columnpmc1008mpCtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pmc1008mpCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.47.6.2.26.1.2 | Columnpmc1008mpCtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.47.6.2.48 | Tablepmc1008mpCtrlprotocolTable | not-accessible | current | List of pmc1008mpCtrlprotocol Article |
| 1.3.6.1.4.1.20044.47.6.2.48.1 | Rowpmc1008mpCtrlprotocolEntry | not-accessible | current | Row definition for the pmc1008mpCtrlprotocol table |
| 1.3.6.1.4.1.20044.47.6.2.48.1.1 | Columnpmc1008mpCtrlprotocolIndex | read-only | current | Index definition for the pmc1008mpCtrlprotocol table |
| 1.3.6.1.4.1.20044.47.6.2.48.1.2 | Columnpmc1008mpCtrlprotocolPortn | read-write | current | Protocol used for client port: This OID sets the protocol of the Client port. |
| 1.3.6.1.4.1.20044.47.6.2.128 | Tablepmc1008mpCtrladddropTsClientARxProtectTable | not-accessible | current | List of pmc1008mpCtrladddropTsClientARxProtect Article |
| 1.3.6.1.4.1.20044.47.6.2.128.1 | Rowpmc1008mpCtrladddropTsClientARxProtectEntry | not-accessible | current | Row definition for the pmc1008mpCtrladddropTsClientARxProtect table |
| 1.3.6.1.4.1.20044.47.6.2.128.1.1 | Columnpmc1008mpCtrladddropTsClientARxProtectIndex | read-only | current | Index definition for the pmc1008mpCtrladddropTsClientARxProtect table |
| 1.3.6.1.4.1.20044.47.6.2.128.1.2 | Columnpmc1008mpCtrladddropTsClientARxProtectPortn | read-write | current | Client A Switch Mode :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the client inter… |
| 1.3.6.1.4.1.20044.47.6.2.136 | Tablepmc1008mpCtrladddropTsPairModeTable | not-accessible | current | List of pmc1008mpCtrladddropTsPairMode Article |
| 1.3.6.1.4.1.20044.47.6.2.136.1 | Rowpmc1008mpCtrladddropTsPairModeEntry | not-accessible | current | Row definition for the pmc1008mpCtrladddropTsPairMode table |
| 1.3.6.1.4.1.20044.47.6.2.136.1.1 | Columnpmc1008mpCtrladddropTsPairModeIndex | read-only | current | Index definition for the pmc1008mpCtrladddropTsPairMode table |
| 1.3.6.1.4.1.20044.47.6.2.136.1.2 | Columnpmc1008mpCtrladddropTsPairModePortn | read-write | current | TS Group Mode :This OID selects the mode on the group of clients <Help> This control defines the mode (Add/Drop or Split&Select) of two consecutive Client (1/2… |
| 1.3.6.1.4.1.20044.47.6.2.271 | Tablepmc1008mpCtrlclientResetAllCountTable | not-accessible | current | List of pmc1008mpCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.47.6.2.271.1 | Rowpmc1008mpCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pmc1008mpCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.47.6.2.271.1.1 | Columnpmc1008mpCtrlclientResetAllCountIndex | read-only | current | Index definition for the pmc1008mpCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.47.6.2.271.1.2 | Columnpmc1008mpCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.47.6.3 | Nodepmc1008mpCtrlLine | |||
| 1.3.6.1.4.1.20044.47.6.3.64 | Nodepmc1008mpCtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.47.6.3.64.1 | Scalarpmc1008mpCtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.47.6.3.66 | Nodepmc1008mpCtrllineLoop | |||
| 1.3.6.1.4.1.20044.47.6.3.66.1 | Scalarpmc1008mpCtrlLineLoop | read-write | deprecated | PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups… |
| 1.3.6.1.4.1.20044.47.6.3.67 | Nodepmc1008mpCtrlmsAis | |||
| 1.3.6.1.4.1.20044.47.6.3.67.1 | Scalarpmc1008mpCtrlMsAis | read-write | current | Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
| 1.3.6.1.4.1.20044.47.6.3.69 | Tablepmc1008mpCtrlfecDisableTable | not-accessible | current | List of pmc1008mpCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.47.6.3.69.1 | Rowpmc1008mpCtrlfecDisableEntry | not-accessible | current | Row definition for the pmc1008mpCtrlfecDisable table |
| 1.3.6.1.4.1.20044.47.6.3.69.1.1 | Columnpmc1008mpCtrlfecDisableIndex | read-only | current | Index definition for the pmc1008mpCtrlfecDisable table |
| 1.3.6.1.4.1.20044.47.6.3.69.1.2 | Columnpmc1008mpCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.47.6.3.74 | Tablepmc1008mpCtrllineOosModeTable | not-accessible | current | List of pmc1008mpCtrllineOosMode Article |
| 1.3.6.1.4.1.20044.47.6.3.74.1 | Rowpmc1008mpCtrllineOosModeEntry | not-accessible | current | Row definition for the pmc1008mpCtrllineOosMode table |
| 1.3.6.1.4.1.20044.47.6.3.74.1.1 | Columnpmc1008mpCtrllineOosModeIndex | read-only | current | Index definition for the pmc1008mpCtrllineOosMode table |
| 1.3.6.1.4.1.20044.47.6.3.74.1.2 | Columnpmc1008mpCtrllineOosModePortn | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.47.6.3.208 | Tablepmc1008mpCtrlxfpOnoffTable | not-accessible | current | List of pmc1008mpCtrlxfpOnoff Article |
| 1.3.6.1.4.1.20044.47.6.3.208.1 | Rowpmc1008mpCtrlxfpOnoffEntry | not-accessible | current | Row definition for the pmc1008mpCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.47.6.3.208.1.1 | Columnpmc1008mpCtrlxfpOnoffIndex | read-only | current | Index definition for the pmc1008mpCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.47.6.3.208.1.2 | Columnpmc1008mpCtrlxfpOnoffPortn | read-write | current | XFP/OTX Optical Laser OFF :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.47.6.3.209 | Tablepmc1008mpCtrlxfpLineLoopTable | not-accessible | current | List of pmc1008mpCtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.47.6.3.209.1 | Rowpmc1008mpCtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pmc1008mpCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.47.6.3.209.1.1 | Columnpmc1008mpCtrlxfpLineLoopIndex | read-only | current | Index definition for the pmc1008mpCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.47.6.3.209.1.2 | Columnpmc1008mpCtrlxfpLineLoopPortn | read-write | current | Line XFP/OTX Loop :This OID operates a line loopback on the XFP or the OTX <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.47.6.3.210 | Tablepmc1008mpCtrlxfpXfiLoopTable | not-accessible | current | List of pmc1008mpCtrlxfpXfiLoop Article |
| 1.3.6.1.4.1.20044.47.6.3.210.1 | Rowpmc1008mpCtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pmc1008mpCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.47.6.3.210.1.1 | Columnpmc1008mpCtrlxfpXfiLoopIndex | read-only | current | Index definition for the pmc1008mpCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.47.6.3.210.1.2 | Columnpmc1008mpCtrlxfpXfiLoopPortn | read-write | current | Line XFP/OTX XFI Loop :This OID operates a XFI loopback on the XFP or the OTX <Help> This control defines the XFI loop back of the line transceiver |
| 1.3.6.1.4.1.20044.47.6.3.212 | Tablepmc1008mpCtrllineTunableChannelTable | not-accessible | current | List of pmc1008mpCtrllineTunableChannel Article |
| 1.3.6.1.4.1.20044.47.6.3.212.1 | Rowpmc1008mpCtrllineTunableChannelEntry | not-accessible | current | Row definition for the pmc1008mpCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.47.6.3.212.1.1 | Columnpmc1008mpCtrllineTunableChannelIndex | read-only | current | Index definition for the pmc1008mpCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.47.6.3.212.1.2 | Columnpmc1008mpCtrllineTunableChannelPortn | read-write | current | ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
| 1.3.6.1.4.1.20044.47.6.3.213 | Tablepmc1008mpCtrllinePhotodiodeModeTable | not-accessible | current | List of pmc1008mpCtrllinePhotodiodeMode Article |
| 1.3.6.1.4.1.20044.47.6.3.213.1 | Rowpmc1008mpCtrllinePhotodiodeModeEntry | not-accessible | current | Row definition for the pmc1008mpCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.47.6.3.213.1.1 | Columnpmc1008mpCtrllinePhotodiodeModeIndex | read-only | current | Index definition for the pmc1008mpCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.47.6.3.213.1.2 | Columnpmc1008mpCtrllinePhotodiodeModePortn | read-write | current | OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL… |
| 1.3.6.1.4.1.20044.47.6.3.214 | Tablepmc1008mpCtrllinePhotodiodeValueTable | not-accessible | current | List of pmc1008mpCtrllinePhotodiodeValue Article |
| 1.3.6.1.4.1.20044.47.6.3.214.1 | Rowpmc1008mpCtrllinePhotodiodeValueEntry | not-accessible | current | Row definition for the pmc1008mpCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.47.6.3.214.1.1 | Columnpmc1008mpCtrllinePhotodiodeValueIndex | read-only | current | Index definition for the pmc1008mpCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.47.6.3.214.1.2 | Columnpmc1008mpCtrllinePhotodiodeValuePortn | read-write | current | OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl… |
| 1.3.6.1.4.1.20044.47.6.3.215 | Tablepmc1008mpCtrllinePowerLaserTable | not-accessible | current | List of pmc1008mpCtrllinePowerLaser Article |
| 1.3.6.1.4.1.20044.47.6.3.215.1 | Rowpmc1008mpCtrllinePowerLaserEntry | not-accessible | current | Row definition for the pmc1008mpCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.47.6.3.215.1.1 | Columnpmc1008mpCtrllinePowerLaserIndex | read-only | current | Index definition for the pmc1008mpCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.47.6.3.215.1.2 | Columnpmc1008mpCtrllinePowerLaserPortn | read-write | current | Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (Unit = dBm) <Help> This control defines the start-up output po… |
| 1.3.6.1.4.1.20044.47.6.3.216 | Tablepmc1008mpCtrlotxVlhResetTable | not-accessible | current | List of pmc1008mpCtrlotxVlhReset Article |
| 1.3.6.1.4.1.20044.47.6.3.216.1 | Rowpmc1008mpCtrlotxVlhResetEntry | not-accessible | current | Row definition for the pmc1008mpCtrlotxVlhReset table |
| 1.3.6.1.4.1.20044.47.6.3.216.1.1 | Columnpmc1008mpCtrlotxVlhResetIndex | read-only | current | Index definition for the pmc1008mpCtrlotxVlhReset table |
| 1.3.6.1.4.1.20044.47.6.3.216.1.2 | Columnpmc1008mpCtrlOtxVlhResetPortn | read-write | current | OTX-VLH Reset :This OID resets the OTX-VLH module <Help> This control resets the OTX-VLH and its parameters |
| 1.3.6.1.4.1.20044.47.6.3.217 | Tablepmc1008mpCtrllineAccessLoopTable | not-accessible | current | List of pmc1008mpCtrllineAccessLoop Article |
| 1.3.6.1.4.1.20044.47.6.3.217.1 | Rowpmc1008mpCtrllineAccessLoopEntry | not-accessible | current | Row definition for the pmc1008mpCtrllineAccessLoop table |
| 1.3.6.1.4.1.20044.47.6.3.217.1.1 | Columnpmc1008mpCtrllineAccessLoopIndex | read-only | current | Index definition for the pmc1008mpCtrllineAccessLoop table |
| 1.3.6.1.4.1.20044.47.6.3.217.1.2 | Columnpmc1008mpCtrllineAccessLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.47.6.3.218 | Tablepmc1008mpCtrllineLoopTransceiverTable | not-accessible | current | List of pmc1008mpCtrllineLoopTransceiver Article |
| 1.3.6.1.4.1.20044.47.6.3.218.1 | Rowpmc1008mpCtrllineLoopTransceiverEntry | not-accessible | current | Row definition for the pmc1008mpCtrllineLoopTransceiver table |
| 1.3.6.1.4.1.20044.47.6.3.218.1.1 | Columnpmc1008mpCtrllineLoopTransceiverIndex | read-only | current | Index definition for the pmc1008mpCtrllineLoopTransceiver table |
| 1.3.6.1.4.1.20044.47.6.3.218.1.2 | Columnpmc1008mpCtrllineLoopTransceiverPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.47.6.3.335 | Tablepmc1008mpCtrllineResetAllCountTable | not-accessible | current | List of pmc1008mpCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.47.6.3.335.1 | Rowpmc1008mpCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pmc1008mpCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.47.6.3.335.1.1 | Columnpmc1008mpCtrllineResetAllCountIndex | read-only | current | Index definition for the pmc1008mpCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.47.6.3.335.1.2 | Columnpmc1008mpCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.47.7 | Nodepmc1008mpri | |||
| 1.3.6.1.4.1.20044.47.7.1 | Nodepmc1008mpriTable | |||
| 1.3.6.1.4.1.20044.47.7.1.1 | Tablepmc1008mpRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.47.7.1.1.1 | Rowpmc1008mpRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.47.7.1.1.1.1 | Columnpmc1008mpRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.47.7.1.1.1.2 | Columnpmc1008mpRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.47.7.1.2 | Tablepmc1008mpRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.47.7.1.2.1 | Rowpmc1008mpRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.47.7.1.2.1.1 | Columnpmc1008mpRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.47.7.1.2.1.2 | Columnpmc1008mpRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.47.7.2 | Scalarpmc1008mpRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.47.7.3 | Scalarpmc1008mpRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.47.7.4 | Scalarpmc1008mpRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.47.7.5 | Scalarpmc1008mpRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.47.7.6 | Scalarpmc1008mpRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.47.8 | Nodepmc1008mpdownload | |||
| 1.3.6.1.4.1.20044.47.8.1 | Nodepmc1008mpDwlOther | |||
| 1.3.6.1.4.1.20044.47.8.1.0 | Nodepmc1008mpDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.47.8.1.0.1 | Scalarpmc1008mpDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.47.8.1.0.2 | Scalarpmc1008mpDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.47.8.1.1 | Nodepmc1008mpDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.47.8.1.1.1 | Scalarpmc1008mpDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.47.8.1.1.2 | Scalarpmc1008mpDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.47.8.1.1.5 | Scalarpmc1008mpDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.47.8.1.1.6 | Scalarpmc1008mpDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.47.8.1.2 | Nodepmc1008mpDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.47.8.1.2.1 | Scalarpmc1008mpDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.47.8.1.2.2 | Scalarpmc1008mpDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.47.8.1.2.3 | Scalarpmc1008mpDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.47.8.1.2.4 | Scalarpmc1008mpDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.47.8.1.2.5 | Scalarpmc1008mpDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.47.8.1.2.6 | Scalarpmc1008mpDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.47.8.1.2.7 | Scalarpmc1008mpDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.47.8.1.2.8 | Scalarpmc1008mpDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.47.8.2 | Nodepmc1008mpDwlClient | |||
| 1.3.6.1.4.1.20044.47.8.3 | Nodepmc1008mpDwlLine | |||
| 1.3.6.1.4.1.20044.47.9 | Nodepmc1008mpConfig | |||
| 1.3.6.1.4.1.20044.47.9.1 | Nodepmc1008mpCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.47.9.1.1 | Tablepmc1008mpCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.1.1.1 | Rowpmc1008mpCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.47.9.1.1.1.1 | Columnpmc1008mpCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.47.9.1.1.1.3 | Columnpmc1008mpCfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.47.9.1.1.1.9 | Columnpmc1008mpCfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.47.9.1.1.1.10 | Columnpmc1008mpCfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.47.9.1.1.1.17 | Columnpmc1008mpCfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.47.9.1.1.1.18 | Columnpmc1008mpCfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.47.9.1.1.1.19 | Columnpmc1008mpCfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.47.9.1.1.1.20 | Columnpmc1008mpCfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.47.9.2 | Nodepmc1008mpCfgStartup | |||
| 1.3.6.1.4.1.20044.47.9.2.1 | Tablepmc1008mpCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.2.1.1 | Rowpmc1008mpCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.47.9.2.1.1.1 | Columnpmc1008mpCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.47.9.2.1.1.3 | Columnpmc1008mpCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.47.9.2.1.1.4 | Columnpmc1008mpCfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.47.9.2.1.1.5 | Columnpmc1008mpCfgAdddropConfPortPortn | read-write | deprecated | Default Add&Drop mode on Client Port :This register configures the default Add&Drop mode on the port. |
| 1.3.6.1.4.1.20044.47.9.2.2 | Nodepmc1008mptablelineStartup | |||
| 1.3.6.1.4.1.20044.47.9.2.2.2 | Scalarpmc1008mpCfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.47.9.2.2.5 | Scalarpmc1008mpCfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.47.9.2.2.6 | Scalarpmc1008mpCfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.47.9.2.2.7 | Scalarpmc1008mpCfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.47.9.2.2.9 | Scalarpmc1008mpCfglineOptions2 | read-write | deprecated | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.47.9.2.3 | Tablepmc1008mpCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.2.3.1 | Rowpmc1008mpCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.47.9.2.3.1.1 | Columnpmc1008mpCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.47.9.2.3.1.3 | Columnpmc1008mpCfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.47.9.2.3.1.4 | Columnpmc1008mpCfgDataRateConfXfpPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.47.9.2.4 | Tablepmc1008mpCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.2.4.1 | Rowpmc1008mpCfgOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.47.9.2.4.1.1 | Columnpmc1008mpCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.47.9.2.4.1.3 | Columnpmc1008mpCfgLineOtxMiscPortn | read-write | current | Default Line OTX TLH miscellaneous :This register configures the start-up miscellaneous mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.4 | Columnpmc1008mpCfgLineDitherRatePortn | read-write | current | Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.5 | Columnpmc1008mpCfgLineDitherFhzPortn | read-write | current | Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.6 | Columnpmc1008mpCfgLinePwrLaserPortn | read-write | current | Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
| 1.3.6.1.4.1.20044.47.9.2.4.1.7 | Columnpmc1008mpCfgLineFCurrentPortn | read-write | current | Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.8 | Columnpmc1008mpCfgLineGridCurrentPortn | read-write | current | Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.9 | Columnpmc1008mpCfgFPortn | read-write | current | Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.10 | Columnpmc1008mpCfgReservedPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.47.9.2.4.1.11 | Columnpmc1008mpCfgLinePhotodiodeModePortn | read-write | current | Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.2.4.1.12 | Columnpmc1008mpCfgLinePhotodiodeValuePortn | read-write | current | Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH |
| 1.3.6.1.4.1.20044.47.9.3 | Nodepmc1008mpCfgOther | |||
| 1.3.6.1.4.1.20044.47.9.3.1 | Nodepmc1008mptablemoduleOther | |||
| 1.3.6.1.4.1.20044.47.9.3.1.2 | Scalarpmc1008mpCfgmode | read-write | current | Default settings on Module :This register selects the DCC configuration of the PM |
| 1.3.6.1.4.1.20044.47.9.4 | Nodepmc1008mpCfgLabels | |||
| 1.3.6.1.4.1.20044.47.9.4.1 | Tablepmc1008mpCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.4.1.1 | Rowpmc1008mpCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.47.9.4.1.1.1 | Columnpmc1008mpCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.47.9.4.1.1.3 | Columnpmc1008mpCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.47.9.4.2 | Tablepmc1008mpCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.4.2.1 | Rowpmc1008mpCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.47.9.4.2.1.1 | Columnpmc1008mpCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.47.9.4.2.1.3 | Columnpmc1008mpCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.47.9.5 | Nodepmc1008mpCfgStartuptimeslotsline1 | |||
| 1.3.6.1.4.1.20044.47.9.5.1 | Tablepmc1008mpCfgTimeslotsportsline1Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.5.1.1 | Rowpmc1008mpCfgTimeslotsportsline1Entry | not-accessible | current | Row definition for the startuptimeslotsline1 table |
| 1.3.6.1.4.1.20044.47.9.5.1.1.1 | Columnpmc1008mpCfgTimeslotsportsline1Index | read-only | current | Index definition for the timeslotsportsline1 table |
| 1.3.6.1.4.1.20044.47.9.5.1.1.3 | Columnpmc1008mpCfgLine1Timeslotb2PortPortn | read-write | current | Port Defaut Time Slot allocation (MSB) on Line1 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.47.9.5.1.1.4 | Columnpmc1008mpCfgLine1Timeslotb1PortPortn | read-write | current | Port Defaut Time Slot allocation (LSB) on Line1 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.47.9.5.1.1.5 | Columnpmc1008mpCfgLine1ProtocolPortPortn | read-write | current | Port Defaut Protocol on Line1 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.47.9.6 | Nodepmc1008mpCfgStartuptimeslotsline2 | |||
| 1.3.6.1.4.1.20044.47.9.6.1 | Tablepmc1008mpCfgTimeslotsportsline2Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.6.1.1 | Rowpmc1008mpCfgTimeslotsportsline2Entry | not-accessible | current | Row definition for the startuptimeslotsline2 table |
| 1.3.6.1.4.1.20044.47.9.6.1.1.1 | Columnpmc1008mpCfgTimeslotsportsline2Index | read-only | current | Index definition for the timeslotsportsline2 table |
| 1.3.6.1.4.1.20044.47.9.6.1.1.3 | Columnpmc1008mpCfgLine2Timeslotb2PortPortn | read-write | current | Port Defaut Time Slot allocation (MSB) on Line2 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.47.9.6.1.1.4 | Columnpmc1008mpCfgLine2Timeslotb1PortPortn | read-write | current | Port Defaut Time Slot allocation (LSB) on Line2 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.47.9.6.1.1.5 | Columnpmc1008mpCfgLine2ProtocolPortPortn | read-write | current | Port Defaut Protocol on Line2 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.47.9.7 | Nodepmc1008mpCfgStartuptimeslotspassthroughline1 | |||
| 1.3.6.1.4.1.20044.47.9.7.1 | Tablepmc1008mpCfgTimeslotspassthroughline1Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.7.1.1 | Rowpmc1008mpCfgTimeslotspassthroughline1Entry | not-accessible | current | Row definition for the startuptimeslotspassthroughline1 table |
| 1.3.6.1.4.1.20044.47.9.7.1.1.1 | Columnpmc1008mpCfgTimeslotspassthroughline1Index | read-only | current | Index definition for the timeslotspassthroughline1 table |
| 1.3.6.1.4.1.20044.47.9.7.1.1.3 | Columnpmc1008mpCfgLine1Timeslotb2PassthroughPortn | read-write | current | Port Defaut PassThrough Time Slot allocation (MSB) on Line1 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.47.9.7.1.1.4 | Columnpmc1008mpCfgLine1Timeslotb1PassthroughPortn | read-write | current | Port Defaut PassThroughTime Slot allocation (LSB) on Line1 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.47.9.7.1.1.5 | Columnpmc1008mpCfgLine1ProtocolPassthroughPortn | read-write | current | Port Defaut PassThrough Protocol on Line1 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.47.9.8 | Nodepmc1008mpCfgStartuptimeslotspassthroughline2 | |||
| 1.3.6.1.4.1.20044.47.9.8.1 | Tablepmc1008mpCfgTimeslotspassthroughline2Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.8.1.1 | Rowpmc1008mpCfgTimeslotspassthroughline2Entry | not-accessible | current | Row definition for the startuptimeslotspassthroughline2 table |
| 1.3.6.1.4.1.20044.47.9.8.1.1.1 | Columnpmc1008mpCfgTimeslotspassthroughline2Index | read-only | current | Index definition for the timeslotspassthroughline2 table |
| 1.3.6.1.4.1.20044.47.9.8.1.1.3 | Columnpmc1008mpCfgLine2Timeslotb2PassthroughPortn | read-write | current | Port Defaut PassThrough Time Slot allocation (MSB) on Line2 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.47.9.8.1.1.4 | Columnpmc1008mpCfgLine2Timeslotb1PassthroughPortn | read-write | current | Port Defaut PassThroughTime Slot allocation (LSB) on Line2 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.47.9.8.1.1.5 | Columnpmc1008mpCfgLine2ProtocolPassthroughPortn | read-write | current | Port Defaut PassThrough Protocol on Line2 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.47.9.9 | Nodepmc1008mpCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.47.9.9.1 | Tablepmc1008mpCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.47.9.9.1.1 | Rowpmc1008mpCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.47.9.9.1.1.1 | Columnpmc1008mpCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.47.9.9.1.1.3 | Columnpmc1008mpCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.47.9.9.1.1.4 | Columnpmc1008mpCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.47.9.9.1.1.5 | Columnpmc1008mpCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.47.9.9.1.1.6 | Columnpmc1008mpCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.47.9.9.1.1.7 | Columnpmc1008mpCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.47.9.257 | Scalarpmc1008mpCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.47.10 | Nodepmc1008mptraps | |||
| 1.3.6.1.4.1.20044.47.10.2 | Scalarpmc1008mptrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.47.10.3 | Scalarpmc1008mptrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.47.10.4 | Scalarpmc1008mptrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.47.10.30 | Notificationpmc1008mpLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.47.10.31 | Notificationpmc1008mpLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.47.10.32 | Notificationpmc1008mpLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.47.10.33 | Notificationpmc1008mpLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.47.10.34 | Notificationpmc1008mpLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.47.10.35 | Notificationpmc1008mpLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.47.10.40 | Notificationpmc1008mpClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.47.10.41 | Notificationpmc1008mpClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.47.10.42 | Notificationpmc1008mpClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.47.10.43 | Notificationpmc1008mpClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.47.10.44 | Notificationpmc1008mpClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.47.10.45 | Notificationpmc1008mpClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.47.10.50 | Notificationpmc1008mpPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.47.10.51 | Notificationpmc1008mpPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.47.11 | Nodepmc1008mpMonitoring | |||
| 1.3.6.1.4.1.20044.47.11.1 | Nodepmc1008mpMonOther | |||
| 1.3.6.1.4.1.20044.47.11.1.1 | Nodepmc1008mpMonSync | |||
| 1.3.6.1.4.1.20044.47.11.1.1.257 | Scalarpmc1008mpPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.47.11.1.1.259 | Scalarpmc1008mpPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.47.11.1.1.260 | Scalarpmc1008mpPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.47.11.1.2 | Nodepmc1008mpMonTimeStamp | |||
| 1.3.6.1.4.1.20044.47.11.1.2.1 | Scalarpmc1008mpPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.47.11.1.2.2 | Scalarpmc1008mpPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.47.11.1.2.5 | Scalarpmc1008mpPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.47.11.1.2.6 | Scalarpmc1008mpPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.47.11.1.2.7 | Scalarpmc1008mpPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.47.11.1.2.8 | Scalarpmc1008mpPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.47.11.1.3 | Nodepmc1008mpMonRmon | |||
| 1.3.6.1.4.1.20044.47.11.1.3.359 | Scalarpmc1008mpMonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.47.11.1.3.360 | Scalarpmc1008mpMonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.47.11.2 | Nodepmc1008mpMonClient | |||
| 1.3.6.1.4.1.20044.47.11.2.4 | Nodepmc1008mpMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.47.11.2.4.16 | Tablepmc1008mpMonupRmonByteCntTable | not-accessible | current | List of pmc1008mpMonupRmonByteCnt Article |
| 1.3.6.1.4.1.20044.47.11.2.4.16.1 | Rowpmc1008mpMonupRmonByteCntEntry | not-accessible | current | Row definition for the pmc1008mpMonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.16.1.1 | Columnpmc1008mpMonupRmonByteCntIndex | read-only | current | Index definition for the pmc1008mpMonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.16.1.2 | Columnpmc1008mpMonupRmonByteCntValuePortn | read-only | current | Bytes Counter On Client Input :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes rec… |
| 1.3.6.1.4.1.20044.47.11.2.4.16.1.3 | Columnpmc1008mpMonupRmonByteCntErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.47.11.2.4.16.1.4 | Columnpmc1008mpMonupRmonByteCntOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.47.11.2.4.24 | Tablepmc1008mpMonupRmonCrcErrorCntTable | not-accessible | current | List of pmc1008mpMonupRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.47.11.2.4.24.1 | Rowpmc1008mpMonupRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pmc1008mpMonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.24.1.1 | Columnpmc1008mpMonupRmonCrcErrorCntIndex | read-only | current | Index definition for the pmc1008mpMonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.24.1.2 | Columnpmc1008mpMonupRmonCrcErrorCntValuePortn | read-only | current | CRC Errors Counter On Client Input :This counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC … |
| 1.3.6.1.4.1.20044.47.11.2.4.24.1.3 | Columnpmc1008mpMonupRmonCrcErrorCntErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.47.11.2.4.24.1.4 | Columnpmc1008mpMonupRmonCrcErrorCntOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.47.11.2.4.32 | Tablepmc1008mpMonupRmonPacketsCntTable | not-accessible | current | List of pmc1008mpMonupRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.47.11.2.4.32.1 | Rowpmc1008mpMonupRmonPacketsCntEntry | not-accessible | current | Row definition for the pmc1008mpMonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.32.1.1 | Columnpmc1008mpMonupRmonPacketsCntIndex | read-only | current | Index definition for the pmc1008mpMonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.32.1.2 | Columnpmc1008mpMonupRmonPacketsCntValuePortn | read-only | current | Packets Counter On Client Input :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets re… |
| 1.3.6.1.4.1.20044.47.11.2.4.32.1.3 | Columnpmc1008mpMonupRmonPacketsCntErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.47.11.2.4.32.1.4 | Columnpmc1008mpMonupRmonPacketsCntOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.47.11.2.4.40 | Tablepmc1008mpMonupRmonBroadcastCntTable | not-accessible | current | List of pmc1008mpMonupRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.47.11.2.4.40.1 | Rowpmc1008mpMonupRmonBroadcastCntEntry | not-accessible | current | Row definition for the pmc1008mpMonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.40.1.1 | Columnpmc1008mpMonupRmonBroadcastCntIndex | read-only | current | Index definition for the pmc1008mpMonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.40.1.2 | Columnpmc1008mpMonupRmonBroadcastCntValuePortn | read-only | current | Broadcast Counter On Client Input :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number o… |
| 1.3.6.1.4.1.20044.47.11.2.4.40.1.3 | Columnpmc1008mpMonupRmonBroadcastCntErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.47.11.2.4.40.1.4 | Columnpmc1008mpMonupRmonBroadcastCntOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.47.11.2.4.48 | Tablepmc1008mpMonupRmonMulticastCntTable | not-accessible | current | List of pmc1008mpMonupRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.47.11.2.4.48.1 | Rowpmc1008mpMonupRmonMulticastCntEntry | not-accessible | current | Row definition for the pmc1008mpMonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.48.1.1 | Columnpmc1008mpMonupRmonMulticastCntIndex | read-only | current | Index definition for the pmc1008mpMonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.47.11.2.4.48.1.2 | Columnpmc1008mpMonupRmonMulticastCntValuePortn | read-only | current | Multicast Counter On Client Input :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number o… |
| 1.3.6.1.4.1.20044.47.11.2.4.48.1.3 | Columnpmc1008mpMonupRmonMulticastCntErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.47.11.2.4.48.1.4 | Columnpmc1008mpMonupRmonMulticastCntOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.47.11.2.16 | Tablepmc1008mpPerfTelecomClientCurrent15StatTable | not-accessible | current | List of pmc1008mpPerfTelecomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.47.11.2.16.1 | Rowpmc1008mpPerfTelecomClientCurrent15StatEntry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.47.11.2.16.1.1 | Columnpmc1008mpPerfTelecomClientCurrent15StatIndex | read-only | current | Index definition for the pmc1008mpPerfTelecomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.47.11.2.16.1.2 | Columnpmc1008mpPerfTelecomClientCurrent15StatInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.16.1.3 | Columnpmc1008mpPerfTelecomClientCurrent15StatCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.2.16.1.4 | Columnpmc1008mpPerfTelecomClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.16.1.5 | Columnpmc1008mpPerfTelecomClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.16.1.6 | Columnpmc1008mpPerfTelecomClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.16.1.7 | Columnpmc1008mpPerfTelecomClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.16.1.8 | Columnpmc1008mpPerfTelecomClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.16.1.9 | Columnpmc1008mpPerfTelecomClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.16.1.10 | Columnpmc1008mpPerfTelecomClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.16.1.11 | Columnpmc1008mpPerfTelecomClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.24 | Tablepmc1008mpPerfTelecomClientPast15StatHistoryPort1Table | not-accessible | current | List of pmc1008mpPerfTelecomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.47.11.2.24.1 | Rowpmc1008mpPerfTelecomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.24.1.1 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmc1008mpPerfTelecomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.24.1.2 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.24.1.3 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.2.24.1.4 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.24.1.5 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.24.1.6 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.24.1.7 | Columnpmc1008mpPerfTelecomClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.24.1.8 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.24.1.9 | Columnpmc1008mpPerfTelecomClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.24.1.10 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.24.1.11 | Columnpmc1008mpPerfTelecomClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.32 | Tablepmc1008mpPerfTelecomClientCurrent24StatTable | not-accessible | current | List of pmc1008mpPerfTelecomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.47.11.2.32.1 | Rowpmc1008mpPerfTelecomClientCurrent24StatEntry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.47.11.2.32.1.1 | Columnpmc1008mpPerfTelecomClientCurrent24StatIndex | read-only | current | Index definition for the pmc1008mpPerfTelecomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.47.11.2.32.1.2 | Columnpmc1008mpPerfTelecomClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.32.1.3 | Columnpmc1008mpPerfTelecomClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.2.32.1.4 | Columnpmc1008mpPerfTelecomClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.32.1.5 | Columnpmc1008mpPerfTelecomClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.32.1.6 | Columnpmc1008mpPerfTelecomClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.32.1.7 | Columnpmc1008mpPerfTelecomClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.32.1.8 | Columnpmc1008mpPerfTelecomClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.32.1.9 | Columnpmc1008mpPerfTelecomClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.32.1.10 | Columnpmc1008mpPerfTelecomClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.32.1.11 | Columnpmc1008mpPerfTelecomClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.40 | Tablepmc1008mpPerfTelecomClientPast24StatHistoryPort1Table | not-accessible | current | List of pmc1008mpPerfTelecomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.47.11.2.40.1 | Rowpmc1008mpPerfTelecomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.40.1.1 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmc1008mpPerfTelecomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.40.1.2 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.40.1.3 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.2.40.1.4 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.40.1.5 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.40.1.6 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.40.1.7 | Columnpmc1008mpPerfTelecomClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.40.1.8 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.40.1.9 | Columnpmc1008mpPerfTelecomClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.40.1.10 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.40.1.11 | Columnpmc1008mpPerfTelecomClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.2.256 | Tablepmc1008mpPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pmc1008mpPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.47.11.2.256.1 | Rowpmc1008mpPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pmc1008mpPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.47.11.2.256.1.1 | Columnpmc1008mpPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pmc1008mpPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.47.11.2.256.1.2 | Columnpmc1008mpperfdatacomclientCurrent15StatInBytesCountInvPortn | read-only | current | Client Current 15-min Input Bytes counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.3 | Columnpmc1008mpperfdatacomclientCurrent15StatInBytesCountPortn | read-only | current | Client Current 15-min Input Bytes counter :This OID gives the current 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.4 | Columnpmc1008mpperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min CRC counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.5 | Columnpmc1008mpperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min CRC counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.8 | Columnpmc1008mpperfdatacomclientCurrent15StatInBroadcastCountInvPortn | read-only | current | Client Current 15-min Input Broadcast counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.9 | Columnpmc1008mpperfdatacomclientCurrent15StatInBroadcastCountPortn | read-only | current | Client Current 15-min Input Broadcast counter :This OID gives the current 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.10 | Columnpmc1008mpperfdatacomclientCurrent15StatInMulticastCountInvPortn | read-only | current | Client Current 15-min Input Multicast counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.11 | Columnpmc1008mpperfdatacomclientCurrent15StatInMulticastCountPortn | read-only | current | Client Current 15-min Input Multicast counter :This OID gives the current 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.20 | Columnpmc1008mpperfdatacomclientCurrent15StatInUnicastCountInvPortn | read-only | current | Client Current 15-min Input Unicast counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.21 | Columnpmc1008mpperfdatacomclientCurrent15StatInUnicastCountPortn | read-only | current | Client Current 15-min Input Unicast counter :This OID gives the current 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.22 | Columnpmc1008mpperfdatacomclientCurrent15StatInNonunicastCountInvPortn | read-only | current | Client Current 15-min Input Non Unicast counter inv. :This OID indicates that the current 15-min Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.23 | Columnpmc1008mpperfdatacomclientCurrent15StatInNonunicastCountPortn | read-only | current | Client Current 15-min Input Non Unicast counter :This OID gives the current 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.26 | Columnpmc1008mpperfdatacomclientCurrent15StatOutBytesCountInvPortn | read-only | current | Client Current 15-min Output Bytes counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.27 | Columnpmc1008mpperfdatacomclientCurrent15StatOutBytesCountPortn | read-only | current | Client Current 15-min Output Bytes counter :This OID gives the current 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.32 | Columnpmc1008mpperfdatacomclientCurrent15StatOutBroadcastCountInvPortn | read-only | current | Client Current 15-min Output Broadcast counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.33 | Columnpmc1008mpperfdatacomclientCurrent15StatOutBroadcastCountPortn | read-only | current | Client Current 15-min Output Broadcast counter :This OID gives the current 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.34 | Columnpmc1008mpperfdatacomclientCurrent15StatOutMulticastCountInvPortn | read-only | current | Client Current 15-min Output Multicast counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.35 | Columnpmc1008mpperfdatacomclientCurrent15StatOutMulticastCountPortn | read-only | current | Client Current 15-min Output Multicast counter :This OID gives the current 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.42 | Columnpmc1008mpperfdatacomclientCurrent15StatOutUnicastCountInvPortn | read-only | current | Client Current 15-min Output Unicast counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.43 | Columnpmc1008mpperfdatacomclientCurrent15StatOutUnicastCountPortn | read-only | current | Client Current 15-min Output Unicast counter :This OID gives the current 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.256.1.44 | Columnpmc1008mpperfdatacomclientCurrent15StatOutNonunicastCountInvPortn | read-only | current | Client Current 15-min Output Non Unicast counter inv. :This OID indicates that the current 15-min Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.256.1.45 | Columnpmc1008mpperfdatacomclientCurrent15StatOutNonunicastCountPortn | read-only | current | Client Current 15-min Output Non Unicast counter :This OID gives the current 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264 | Tablepmc1008mpPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pmc1008mpPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.47.11.2.264.1 | Rowpmc1008mpPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmc1008mpPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.264.1.1 | Columnpmc1008mpPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmc1008mpPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.264.1.2 | Columnpmc1008mpperfdatacomclientPast15StatInBytesCountInvPort1 | read-only | current | Client Past 15-min Input Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.3 | Columnpmc1008mpperfdatacomclientPast15StatInBytesCountPort1 | read-only | current | Client Past 15-min Input Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.4 | Columnpmc1008mpperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min CRC counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.5 | Columnpmc1008mpperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min CRC counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.8 | Columnpmc1008mpperfdatacomclientPast15StatInBroadcastCountInvPort1 | read-only | current | Client Past 15-min Input Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.9 | Columnpmc1008mpperfdatacomclientPast15StatInBroadcastCountPort1 | read-only | current | Client Past 15-min Input Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.10 | Columnpmc1008mpperfdatacomclientPast15StatInMulticastCountInvPort1 | read-only | current | Client Past 15-min Input Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.11 | Columnpmc1008mpperfdatacomclientPast15StatInMulticastCountPort1 | read-only | current | Client Past 15-min Input Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.20 | Columnpmc1008mpperfdatacomclientPast15StatInUnicastCountInvPort1 | read-only | current | Client Past 15-min Input Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.21 | Columnpmc1008mpperfdatacomclientPast15StatInUnicastCountPort1 | read-only | current | Client Past 15-min Input Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.22 | Columnpmc1008mpperfdatacomclientPast15StatInNonunicastCountInvPort1 | read-only | current | Client Past 15-min Input Non Unicast counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.23 | Columnpmc1008mpperfdatacomclientPast15StatInNonunicastCountPort1 | read-only | current | Client Past 15-min Input Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.26 | Columnpmc1008mpperfdatacomclientPast15StatOutBytesCountInvPort1 | read-only | current | Client Past 15-min Output Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.27 | Columnpmc1008mpperfdatacomclientPast15StatOutBytesCountPort1 | read-only | current | Client Past 15-min Output Bytes counter :This OID gives the past 15-min Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.32 | Columnpmc1008mpperfdatacomclientPast15StatOutBroadcastCountInvPort1 | read-only | current | Client Past 15-min Output Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.33 | Columnpmc1008mpperfdatacomclientPast15StatOutBroadcastCountPort1 | read-only | current | Client Past 15-min Output Broadcast counter :This OID gives the past 15-min Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.34 | Columnpmc1008mpperfdatacomclientPast15StatOutMulticastCountInvPort1 | read-only | current | Client Past 15-min Output Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.35 | Columnpmc1008mpperfdatacomclientPast15StatOutMulticastCountPort1 | read-only | current | Client Past 15-min Output Multicast counter :This OID gives the past 15-min Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.42 | Columnpmc1008mpperfdatacomclientPast15StatOutUnicastCountInvPort1 | read-only | current | Client Past 15-min Output Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.43 | Columnpmc1008mpperfdatacomclientPast15StatOutUnicastCountPort1 | read-only | current | Client Past 15-min Output Unicast counter :This OID gives the past 15-min Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.264.1.44 | Columnpmc1008mpperfdatacomclientPast15StatOutNonunicastCountInvPort1 | read-only | current | Client Past 15-min Output Non Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.264.1.45 | Columnpmc1008mpperfdatacomclientPast15StatOutNonunicastCountPort1 | read-only | current | Client Past 15-min Output Non Unicast counter :This OID gives the past 15-min Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272 | Tablepmc1008mpPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pmc1008mpPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.47.11.2.272.1 | Rowpmc1008mpPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pmc1008mpPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.47.11.2.272.1.1 | Columnpmc1008mpPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pmc1008mpPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.47.11.2.272.1.2 | Columnpmc1008mpperfdatacomclientCurrent24StatInBytesCountInvPortn | read-only | current | Client Current 24-hours Input Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.3 | Columnpmc1008mpperfdatacomclientCurrent24StatInBytesCountPortn | read-only | current | Client Current 24-hours Input Bytes counter :This OID gives the current 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.4 | Columnpmc1008mpperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours CRC counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.5 | Columnpmc1008mpperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours CRC counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.8 | Columnpmc1008mpperfdatacomclientCurrent24StatInBroadcastCountInvPortn | read-only | current | Client Current 24-hours Input Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.9 | Columnpmc1008mpperfdatacomclientCurrent24StatInBroadcastCountPortn | read-only | current | Client Current 24-hours Input Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.10 | Columnpmc1008mpperfdatacomclientCurrent24StatInMulticastCountInvPortn | read-only | current | Client Current 24-hours Input Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.11 | Columnpmc1008mpperfdatacomclientCurrent24StatInMulticastCountPortn | read-only | current | Client Current 24-hours Input Multicast counter :This OID gives the current 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.20 | Columnpmc1008mpperfdatacomclientCurrent24StatInUnicastCountInvPortn | read-only | current | Client Current 24-hours Input Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.21 | Columnpmc1008mpperfdatacomclientCurrent24StatInUnicastCountPortn | read-only | current | Client Current 24-hours Input Unicast counter :This OID gives the current 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.22 | Columnpmc1008mpperfdatacomclientCurrent24StatInNonunicastCountInvPortn | read-only | current | Client Current 24-hours Input Non Unicast counter inv. :This OID indicates that the current 24-hours Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.23 | Columnpmc1008mpperfdatacomclientCurrent24StatInNonunicastCountPortn | read-only | current | Client Current 24-hours Input Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.26 | Columnpmc1008mpperfdatacomclientCurrent24StatOutBytesCountInvPortn | read-only | current | Client Current 24-hours Output Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.27 | Columnpmc1008mpperfdatacomclientCurrent24StatOutBytesCountPortn | read-only | current | Client Current 24-hours Output Bytes counter :This OID gives the current 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.32 | Columnpmc1008mpperfdatacomclientCurrent24StatOutBroadcastCountInvPortn | read-only | current | Client Current 24-hours Output Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.33 | Columnpmc1008mpperfdatacomclientCurrent24StatOutBroadcastCountPortn | read-only | current | Client Current 24-hours Output Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.34 | Columnpmc1008mpperfdatacomclientCurrent24StatOutMulticastCountInvPortn | read-only | current | Client Current 24-hours Output Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.35 | Columnpmc1008mpperfdatacomclientCurrent24StatOutMulticastCountPortn | read-only | current | Client Current 24-hours Output Multicast counter :This OID gives the current 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.42 | Columnpmc1008mpperfdatacomclientCurrent24StatOutUnicastCountInvPortn | read-only | current | Client Current 24-hours Output Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.43 | Columnpmc1008mpperfdatacomclientCurrent24StatOutUnicastCountPortn | read-only | current | Client Current 24-hours Output Unicast counter :This OID gives the current 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.272.1.44 | Columnpmc1008mpperfdatacomclientCurrent24StatOutNonunicastCountInvPortn | read-only | current | Client Current 24-hours Output Non Unicast counter inv. :This OID indicates that the current 24-hours Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.272.1.45 | Columnpmc1008mpperfdatacomclientCurrent24StatOutNonunicastCountPortn | read-only | current | Client Current 24-hours Output Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280 | Tablepmc1008mpPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pmc1008mpPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.47.11.2.280.1 | Rowpmc1008mpPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmc1008mpPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.280.1.1 | Columnpmc1008mpPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmc1008mpPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.47.11.2.280.1.2 | Columnpmc1008mpperfdatacomclientPast24StatInBytesCountInvPort1 | read-only | current | Client Past 24-hours Input Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.3 | Columnpmc1008mpperfdatacomclientPast24StatInBytesCountPort1 | read-only | current | Client Past 24-hours Input Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.4 | Columnpmc1008mpperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.5 | Columnpmc1008mpperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours CRC counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.8 | Columnpmc1008mpperfdatacomclientPast24StatInBroadcastCountInvPort1 | read-only | current | Client Past 24-hours Input Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.9 | Columnpmc1008mpperfdatacomclientPast24StatInBroadcastCountPort1 | read-only | current | Client Past 24-hours Input Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.10 | Columnpmc1008mpperfdatacomclientPast24StatInMulticastCountInvPort1 | read-only | current | Client Past 24-hours Input Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.11 | Columnpmc1008mpperfdatacomclientPast24StatInMulticastCountPort1 | read-only | current | Client Past 24-hours Input Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.20 | Columnpmc1008mpperfdatacomclientPast24StatInUnicastCountInvPort1 | read-only | current | Client Past 24-hours Input Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.21 | Columnpmc1008mpperfdatacomclientPast24StatInUnicastCountPort1 | read-only | current | Client Past 24-hours Input Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.22 | Columnpmc1008mpperfdatacomclientPast24StatInNonunicastCountInvPort1 | read-only | current | Client Past 24-hours Input Non Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.23 | Columnpmc1008mpperfdatacomclientPast24StatInNonunicastCountPort1 | read-only | current | Client Past 24-hours Input Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.26 | Columnpmc1008mpperfdatacomclientPast24StatOutBytesCountInvPort1 | read-only | current | Client Past 24-hours Output Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.27 | Columnpmc1008mpperfdatacomclientPast24StatOutBytesCountPort1 | read-only | current | Client Past 24-hours Output Bytes counter :This OID gives the past 24-hours Bytes counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.32 | Columnpmc1008mpperfdatacomclientPast24StatOutBroadcastCountInvPort1 | read-only | current | Client Past 24-hours Output Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.33 | Columnpmc1008mpperfdatacomclientPast24StatOutBroadcastCountPort1 | read-only | current | Client Past 24-hours Output Broadcast counter :This OID gives the past 24-hours Broadcast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.34 | Columnpmc1008mpperfdatacomclientPast24StatOutMulticastCountInvPort1 | read-only | current | Client Past 24-hours Output Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.35 | Columnpmc1008mpperfdatacomclientPast24StatOutMulticastCountPort1 | read-only | current | Client Past 24-hours Output Multicast counter :This OID gives the past 24-hours Multicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.42 | Columnpmc1008mpperfdatacomclientPast24StatOutUnicastCountInvPort1 | read-only | current | Client Past 24-hours Output Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.43 | Columnpmc1008mpperfdatacomclientPast24StatOutUnicastCountPort1 | read-only | current | Client Past 24-hours Output Unicast counter :This OID gives the past 24-hours Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.2.280.1.44 | Columnpmc1008mpperfdatacomclientPast24StatOutNonunicastCountInvPort1 | read-only | current | Client Past 24-hours Output Non Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
| 1.3.6.1.4.1.20044.47.11.2.280.1.45 | Columnpmc1008mpperfdatacomclientPast24StatOutNonunicastCountPort1 | read-only | current | Client Past 24-hours Output Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
| 1.3.6.1.4.1.20044.47.11.3 | Nodepmc1008mpMonLine | |||
| 1.3.6.1.4.1.20044.47.11.3.128 | Tablepmc1008mpPerfTelecomLineCurrent15StatTable | not-accessible | current | List of pmc1008mpPerfTelecomLineCurrent15Stat Article |
| 1.3.6.1.4.1.20044.47.11.3.128.1 | Rowpmc1008mpPerfTelecomLineCurrent15StatEntry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomLineCurrent15Stat table |
| 1.3.6.1.4.1.20044.47.11.3.128.1.1 | Columnpmc1008mpPerfTelecomLineCurrent15StatIndex | read-only | current | Index definition for the pmc1008mpPerfTelecomLineCurrent15Stat table |
| 1.3.6.1.4.1.20044.47.11.3.128.1.2 | Columnpmc1008mpPerfTelecomLineCurrent15StatInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.128.1.3 | Columnpmc1008mpPerfTelecomLineCurrent15StatCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.3.128.1.4 | Columnpmc1008mpPerfTelecomLineCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.128.1.5 | Columnpmc1008mpPerfTelecomLineCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.128.1.6 | Columnpmc1008mpPerfTelecomLineCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.128.1.7 | Columnpmc1008mpPerfTelecomLineCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.128.1.8 | Columnpmc1008mpPerfTelecomLineCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.128.1.9 | Columnpmc1008mpPerfTelecomLineCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.128.1.10 | Columnpmc1008mpPerfTelecomLineCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.128.1.11 | Columnpmc1008mpPerfTelecomLineCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.129 | Tablepmc1008mpPerfTelecomLinePast15StatHistoryPort1Table | not-accessible | current | List of pmc1008mpPerfTelecomLinePast15StatHistory Article |
| 1.3.6.1.4.1.20044.47.11.3.129.1 | Rowpmc1008mpPerfTelecomLinePast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomLinePast15StatHistory table |
| 1.3.6.1.4.1.20044.47.11.3.129.1.1 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryPort1Index | read-only | current | Index definition for the pmc1008mpPerfTelecomLinePast15StatHistory table |
| 1.3.6.1.4.1.20044.47.11.3.129.1.2 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.129.1.3 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.3.129.1.4 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.129.1.5 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.129.1.6 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.129.1.7 | Columnpmc1008mpPerfTelecomLinePast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.129.1.8 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.129.1.9 | Columnpmc1008mpPerfTelecomLinePast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.129.1.10 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.129.1.11 | Columnpmc1008mpPerfTelecomLinePast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.130 | Tablepmc1008mpPerfTelecomLineCurrent24StatTable | not-accessible | current | List of pmc1008mpPerfTelecomLineCurrent24Stat Article |
| 1.3.6.1.4.1.20044.47.11.3.130.1 | Rowpmc1008mpPerfTelecomLineCurrent24StatEntry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomLineCurrent24Stat table |
| 1.3.6.1.4.1.20044.47.11.3.130.1.1 | Columnpmc1008mpPerfTelecomLineCurrent24StatIndex | read-only | current | Index definition for the pmc1008mpPerfTelecomLineCurrent24Stat table |
| 1.3.6.1.4.1.20044.47.11.3.130.1.2 | Columnpmc1008mpPerfTelecomLineCurrent24StatInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.130.1.3 | Columnpmc1008mpPerfTelecomLineCurrent24StatCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.3.130.1.4 | Columnpmc1008mpPerfTelecomLineCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.130.1.5 | Columnpmc1008mpPerfTelecomLineCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.130.1.6 | Columnpmc1008mpPerfTelecomLineCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.130.1.7 | Columnpmc1008mpPerfTelecomLineCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.130.1.8 | Columnpmc1008mpPerfTelecomLineCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.130.1.9 | Columnpmc1008mpPerfTelecomLineCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.130.1.10 | Columnpmc1008mpPerfTelecomLineCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.130.1.11 | Columnpmc1008mpPerfTelecomLineCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.131 | Tablepmc1008mpPerfTelecomLinePast24StatHistoryPort1Table | not-accessible | current | List of pmc1008mpPerfTelecomLinePast24StatHistory Article |
| 1.3.6.1.4.1.20044.47.11.3.131.1 | Rowpmc1008mpPerfTelecomLinePast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmc1008mpPerfTelecomLinePast24StatHistory table |
| 1.3.6.1.4.1.20044.47.11.3.131.1.1 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryPort1Index | read-only | current | Index definition for the pmc1008mpPerfTelecomLinePast24StatHistory table |
| 1.3.6.1.4.1.20044.47.11.3.131.1.2 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.131.1.3 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.47.11.3.131.1.4 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.131.1.5 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.131.1.6 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.131.1.7 | Columnpmc1008mpPerfTelecomLinePast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.131.1.8 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.131.1.9 | Columnpmc1008mpPerfTelecomLinePast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.47.11.3.131.1.10 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.47.11.3.131.1.11 | Columnpmc1008mpPerfTelecomLinePast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pmc1008mpAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pmc1008mpDccMode | INTEGER { dccNo(0), dcctermLine1(1), dcctermLine2(2), dcctermLines12(3), dccmaster(4), dccslaveLine12(7) } | current | Mode for DCC |
| Pmc1008mpModeAddDrop | INTEGER { dualPassThrough(1), addDropTsA(2), addDropTsB(4), splitSelectTsA(8), splitSelectTsB(16), splitSelectTsATsB(32) } | current | different mode for client B |
| Pmc1008mpModeAddDropA | INTEGER { passThroughA(1), addDropTsA(2), splitSelectTsA(4) } | current | different mode for client A |
| Pmc1008mpModeTimeSlot | INTEGER { dualPassThrough(1), addDropTsA(2), addDropTsB(4), splitSelectTsA(8), splitSelectTsB(16), splitSelectTsATsB(32) } | current | different mode for time slot |
| Pmc1008mpOtxChannel | INTEGER | current | Channel selection on OTX-TLH on client and line ports |
| Pmc1008mpOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pmc1008mpOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Pmc1008mpProtectionStartUp | INTEGER { auto(2), manualX2Line2(0), manualX1Line1(1) } | current | protection for startup |
| Pmc1008mpProtectionTimeSlot | INTEGER { auto(0), manualX1Line1(257), manualX2Line2(513) } | current | protection for control |