EKINOPS-Pmcrypto-MIB
851 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.96 | IdentitymodulePmcrypto | Creation. | ||
| 1.3.6.1.4.1.20044.96.2 | Nodepmcryptoalarms | |||
| 1.3.6.1.4.1.20044.96.2.1 | NodepmcryptoAlmOther | |||
| 1.3.6.1.4.1.20044.96.2.1.1 | NodepmcryptoAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.96.2.1.1.2 | NodepmcryptoAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.96.2.1.1.2.1 | ScalarpmcryptoAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.96.2.1.1.2.2 | ScalarpmcryptoAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.96.2.1.1.2.3 | ScalarpmcryptoAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.96.2.1.1.2.4 | ScalarpmcryptoAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.96.2.1.1.2.5 | ScalarpmcryptoAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.96.2.1.2 | NodepmcryptoAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.96.2.1.2.336 | NodepmcryptoAlmmodFanFail | |||
| 1.3.6.1.4.1.20044.96.2.1.2.336.1 | ScalarpmcryptoAlmFanFail | read-only | current | Fan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition… |
| 1.3.6.1.4.1.20044.96.2.1.2.336.2 | ScalarpmcryptoAlmFanHighSpeed | read-only | current | Fan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro… |
| 1.3.6.1.4.1.20044.96.2.1.3 | NodepmcryptoAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.96.2.1.3.0 | NodepmcryptoAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.96.2.1.3.0.2 | ScalarpmcryptoAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.96.2.1.3.0.9 | ScalarpmcryptoAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.96.2.1.3.0.15 | ScalarpmcryptoAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.96.2.1.3.0.16 | ScalarpmcryptoAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.96.2.1.3.78 | NodepmcryptoAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.96.2.1.3.78.6 | ScalarpmcryptoAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.96.2.1.3.78.7 | ScalarpmcryptoAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.96.2.2 | NodepmcryptoAlmClient | |||
| 1.3.6.1.4.1.20044.96.2.2.1 | NodepmcryptoAlmClientNurg | |||
| 1.3.6.1.4.1.20044.96.2.2.1.272 | TablepmcryptoAlmclientSfpWarnDdmTable | not-accessible | current | List of pmcryptoAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1 | RowpmcryptoAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pmcryptoAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.1 | ColumnpmcryptoAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pmcryptoAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.2 | ColumnpmcryptoAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.3 | ColumnpmcryptoAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.4 | ColumnpmcryptoAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.5 | ColumnpmcryptoAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.6 | ColumnpmcryptoAlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.7 | ColumnpmcryptoAlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.8 | ColumnpmcryptoAlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.9 | ColumnpmcryptoAlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.16 | ColumnpmcryptoAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.96.2.2.1.272.1.17 | ColumnpmcryptoAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.96.2.2.2 | NodepmcryptoAlmClientUrg | |||
| 1.3.6.1.4.1.20044.96.2.2.2.152 | TablepmcryptoAlmclientHostLaneFaultTable | not-accessible | current | List of pmcryptoAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1 | RowpmcryptoAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pmcryptoAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.1 | ColumnpmcryptoAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pmcryptoAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.2 | ColumnpmcryptoAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.3 | ColumnpmcryptoAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.4 | ColumnpmcryptoAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.5 | ColumnpmcryptoAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.6 | ColumnpmcryptoAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.7 | ColumnpmcryptoAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.10 | ColumnpmcryptoAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.11 | ColumnpmcryptoAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.12 | ColumnpmcryptoAlmLfDetectedPortn | read-only | current | Local Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is de… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.13 | ColumnpmcryptoAlmRfDetectedPortn | read-only | current | Remote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.14 | ColumnpmcryptoAlmStm64ProtocDetectedPortn | read-only | current | STM64 Protocol Detected :This OID indicates a STM64 Protocol detected on the Client Port <Help> Status indicating a STM64 protocol received on the Client side … |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.15 | ColumnpmcryptoAlm10gbeProtocDetectedPortn | read-only | current | 10GbE Protocol Detected :This OID indicates a 10GbE Protocol detected on the Client Port <Help> Status indicating a 10GbE protocol received on the Client side … |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.16 | ColumnpmcryptoAlmOtu2ProtocDetectedPortn | read-only | current | OTU2 Protocol Detected :This OID indicates an OTU2 Protocol detected on the Client Port <Help> Status indicating a OTU2 protocol received on the Client side <C… |
| 1.3.6.1.4.1.20044.96.2.2.2.152.1.17 | ColumnpmcryptoAlmOtu2eProtocDetectedPortn | read-only | current | OTU2e Protocol Detected :This OID indicates an OTU2e Protocol detected on the Client Port <Help> Status indicating a OTU2e protocol received on the Client side… |
| 1.3.6.1.4.1.20044.96.2.2.2.240 | TablepmcryptoAlmclientSfpAlmDdmTable | not-accessible | current | List of pmcryptoAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1 | RowpmcryptoAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pmcryptoAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.1 | ColumnpmcryptoAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pmcryptoAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.2 | ColumnpmcryptoAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.3 | ColumnpmcryptoAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.4 | ColumnpmcryptoAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.5 | ColumnpmcryptoAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.6 | ColumnpmcryptoAlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.7 | ColumnpmcryptoAlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.8 | ColumnpmcryptoAlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.9 | ColumnpmcryptoAlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.16 | ColumnpmcryptoAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.96.2.2.2.240.1.17 | ColumnpmcryptoAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.96.2.2.2.304 | TablepmcryptoAlmclientOtnAlmTable | not-accessible | current | List of pmcryptoAlmclientOtnAlm Article |
| 1.3.6.1.4.1.20044.96.2.2.2.304.1 | RowpmcryptoAlmclientOtnAlmEntry | not-accessible | current | Row definition for the pmcryptoAlmclientOtnAlm table |
| 1.3.6.1.4.1.20044.96.2.2.2.304.1.1 | ColumnpmcryptoAlmclientOtnAlmIndex | read-only | current | Index definition for the pmcryptoAlmclientOtnAlm table |
| 1.3.6.1.4.1.20044.96.2.2.2.304.1.2 | ColumnpmcryptoAlmClientOtu2eDlomPortn | read-only | current | DLOM :This OID indicates that a Loss Of Multiframe has been detected on client port<Help> This alarm indicates if a Loss Of Multiframe has been detected on the… |
| 1.3.6.1.4.1.20044.96.2.2.3 | NodepmcryptoAlmClientCrit | |||
| 1.3.6.1.4.1.20044.96.2.2.3.8 | TablepmcryptoAlmsynthAlmPortTable | not-accessible | current | List of pmcryptoAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1 | RowpmcryptoAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pmcryptoAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.1 | ColumnpmcryptoAlmsynthAlmPortIndex | read-only | current | Index definition for the pmcryptoAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.2 | ColumnpmcryptoAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.3 | ColumnpmcryptoAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.5 | ColumnpmcryptoAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.6 | ColumnpmcryptoAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.7 | ColumnpmcryptoAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.8 | ColumnpmcryptoAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.9 | ColumnpmcryptoAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.10 | ColumnpmcryptoAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.11 | ColumnpmcryptoAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.13 | ColumnpmcryptoAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.96.2.2.3.8.1.17 | ColumnpmcryptoAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.96.2.3 | NodepmcryptoAlmLine | |||
| 1.3.6.1.4.1.20044.96.2.3.1 | NodepmcryptoAlmLineNurg | |||
| 1.3.6.1.4.1.20044.96.2.3.1.72 | TablepmcryptoAlmlineQsfpAlmDdmTable | not-accessible | current | List of pmcryptoAlmlineQsfpAlmDdm Article |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1 | RowpmcryptoAlmlineQsfpAlmDdmEntry | not-accessible | current | Row definition for the pmcryptoAlmlineQsfpAlmDdm table |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.1 | ColumnpmcryptoAlmlineQsfpAlmDdmIndex | read-only | current | Index definition for the pmcryptoAlmlineQsfpAlmDdm table |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.2 | ColumnpmcryptoAlmLineTxPwLowAlmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.3 | ColumnpmcryptoAlmLineTxPwrHighAlmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.4 | ColumnpmcryptoAlmLineTxBiasLowAlmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.5 | ColumnpmcryptoAlmLineTxBiasHighAlmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.6 | ColumnpmcryptoAlmLineVccLowAlmPortn | read-only | current | Client Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.7 | ColumnpmcryptoAlmLineVccHighAlmPortn | read-only | current | Client Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.8 | ColumnpmcryptoAlmLineTempLowAlmPortn | read-only | current | Client Trscv Temp Low Alarm :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.9 | ColumnpmcryptoAlmLineTempHighAlmPortn | read-only | current | Client Trscv Temp High Alarm :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.16 | ColumnpmcryptoAlmLineRxPwrLowAlmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.96.2.3.1.72.1.17 | ColumnpmcryptoAlmLineRxPwrHighAlmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.96.2.3.1.104 | TablepmcryptoAlmlineQsfpWarnDdmTable | not-accessible | current | List of pmcryptoAlmlineQsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1 | RowpmcryptoAlmlineQsfpWarnDdmEntry | not-accessible | current | Row definition for the pmcryptoAlmlineQsfpWarnDdm table |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.1 | ColumnpmcryptoAlmlineQsfpWarnDdmIndex | read-only | current | Index definition for the pmcryptoAlmlineQsfpWarnDdm table |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.2 | ColumnpmcryptoAlmLineTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.3 | ColumnpmcryptoAlmLineTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.4 | ColumnpmcryptoAlmLineTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.5 | ColumnpmcryptoAlmLineTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.6 | ColumnpmcryptoAlmLineVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.7 | ColumnpmcryptoAlmLineVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.8 | ColumnpmcryptoAlmLineTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.9 | ColumnpmcryptoAlmLineTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.16 | ColumnpmcryptoAlmLineRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.96.2.3.1.104.1.17 | ColumnpmcryptoAlmLineRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.96.2.3.2 | NodepmcryptoAlmLineUrg | |||
| 1.3.6.1.4.1.20044.96.2.3.2.196 | TablepmcryptoAlmlineHostLaneFaultTable | not-accessible | current | List of pmcryptoAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1 | RowpmcryptoAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pmcryptoAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.1 | ColumnpmcryptoAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pmcryptoAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.2 | ColumnpmcryptoAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.3 | ColumnpmcryptoAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.4 | ColumnpmcryptoAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.5 | ColumnpmcryptoAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.6 | ColumnpmcryptoAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.7 | ColumnpmcryptoAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.8 | ColumnpmcryptoAlmOtu4DdegPortn | read-only | current | OTU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port <Help> This alarm indicates if a Signal Degrade has been detected upon thres… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.9 | ColumnpmcryptoAlmClientOtu4DtimPortn | read-only | current | OTU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port <Help> This alarm indicates if a Trace Identifier Mismatch has be… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.10 | ColumnpmcryptoAlmLineEncryptionFailurePortn | read-only | current | Encryption Failure :This OID indicates the encryption mechanism failed, impacting the traffic (the line traffic is down). <Help> This alarm indicates the encry… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.12 | ColumnpmcryptoAlmLineOchr4DlosPPortn | read-only | current | Ochr4 - DLOS-P :This OID indicates that a Transmitter failure has been detected on line port <Help> This alarm indicates if a Transmitter Failure has been dete… |
| 1.3.6.1.4.1.20044.96.2.3.2.196.1.17 | ColumnpmcryptoAlmLineOtu4DlomPortn | read-only | current | OTU4 DLOM :This OID indicates that a Loss Of Multiframe has been detected on line port <Help> This alarm indicates if a Loss Of Multiframe has been detected on… |
| 1.3.6.1.4.1.20044.96.2.3.2.208 | TablepmcryptoAlmlineOdu4AlmTable | not-accessible | current | List of pmcryptoAlmlineOdu4Alm Article |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1 | RowpmcryptoAlmlineOdu4AlmEntry | not-accessible | current | Row definition for the pmcryptoAlmlineOdu4Alm table |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.1 | ColumnpmcryptoAlmlineOdu4AlmIndex | read-only | current | Index definition for the pmcryptoAlmlineOdu4Alm table |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.4 | ColumnpmcryptoAlmLineOdu4DplmPortn | read-only | current | ODU4 DPLM :This OID indicates a Payload Mismatch is detected on the line port<Help> Alarm indicating a Payload Mismatch <Condtype> LINE_ODU4_DPLM <Probcause> r… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.6 | ColumnpmcryptoAlmLineOdu4DdegPortn | read-only | current | ODU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation para… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.8 | ColumnpmcryptoAlmLineOdu4IaisPortn | read-only | current | ODU4 IAIS :This OID indicates that an Alarm Indication Signal has been inserted on line port <Help> This alarm indicates if an Alarm Indication Signal has been… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.9 | ColumnpmcryptoAlmLineOdu4DtimPortn | read-only | current | ODU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port<Help> This alarm indicates if an Trace Identifier Mismatch has be… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.10 | ColumnpmcryptoAlmLineOdu4DaisPortn | read-only | current | ODU4 DAIS :This OID indicates that a Alarm Indication SIgnal has been detected on line port<Help> This alarm indicates if an Alarm Indication Signal has been d… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.12 | ColumnpmcryptoAlmLineOdu4IociPortn | read-only | current | ODU4 IOCI :This OID indicates that an Open Connection has been inserted on line port <Help> This alarm indicates if an Open Connection Indication has been inse… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.13 | ColumnpmcryptoAlmLineOdu4DociPortn | read-only | current | ODU4 DOCI :This OID indicates that a Open Connection has been detected on line port <Help> This alarm indicates if an Open Connection Indication has been detec… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.14 | ColumnpmcryptoAlmLineOdu4IbdiPortn | read-only | current | ODU4 IBDI :This OID indicates that a Backward Defect Indication has been inserted on line port <Help> This alarm indicates if a Backward Defect Indication has … |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.15 | ColumnpmcryptoAlmLineOdu4DbdiPortn | read-only | current | ODU4 DBDI :This OID indicates that a Backward Defect Indication has been detected on line port<Help> This alarm indicates if a Backward Defect Indication has b… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.16 | ColumnpmcryptoAlmLineOdu4IlckPortn | read-only | current | ODU4 ILCK :This OID indicates that a Locked Indication has been inserted on line port <Help> This alarm indicates if a Locked Indication has been inserted on t… |
| 1.3.6.1.4.1.20044.96.2.3.2.208.1.17 | ColumnpmcryptoAlmLineOdu4DlckPortn | read-only | current | ODU4 DLCK :This OID indicates that a Locked Indication has been detected on line port <Help> This alarm indicates if a Locked Indication has been detected on t… |
| 1.3.6.1.4.1.20044.96.2.3.3 | NodepmcryptoAlmLineCrit | |||
| 1.3.6.1.4.1.20044.96.2.3.3.40 | TablepmcryptoAlmsynthAlmLineTable | not-accessible | current | List of pmcryptoAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1 | RowpmcryptoAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pmcryptoAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.1 | ColumnpmcryptoAlmsynthAlmLineIndex | read-only | current | Index definition for the pmcryptoAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.2 | ColumnpmcryptoAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.3 | ColumnpmcryptoAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.5 | ColumnpmcryptoAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.6 | ColumnpmcryptoAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.7 | ColumnpmcryptoAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.9 | ColumnpmcryptoAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.10 | ColumnpmcryptoAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.11 | ColumnpmcryptoAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.96.2.3.3.40.1.13 | ColumnpmcryptoAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.96.3 | Nodepmcryptomeasures | |||
| 1.3.6.1.4.1.20044.96.3.1 | NodepmcryptoMesrOther | |||
| 1.3.6.1.4.1.20044.96.3.1.0 | ScalarpmcryptoMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.96.3.1.1 | ScalarpmcryptoMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.96.3.1.7 | ScalarpmcryptoMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.96.3.1.400 | ScalarpmcryptoMesrlineTrscvTemp | read-only | current | LineTrscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (U… |
| 1.3.6.1.4.1.20044.96.3.1.408 | ScalarpmcryptoMesrlineTrscvVoltage | read-only | current | Line Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/100… |
| 1.3.6.1.4.1.20044.96.3.1.500 | ScalarpmcryptoMesrmoduleTempMin | read-only | current | Min Module Temperature :This OID gives the minimum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the minimum … |
| 1.3.6.1.4.1.20044.96.3.1.501 | ScalarpmcryptoMesrmoduleTempMax | read-only | current | Max Module Temperature :This OID gives the maximum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the maximum … |
| 1.3.6.1.4.1.20044.96.3.2 | NodepmcryptoMesrClient | |||
| 1.3.6.1.4.1.20044.96.3.2.16 | TablepmcryptoMesrclientTxTempTable | not-accessible | current | List of pmcryptoMesrclientTxTemp Article |
| 1.3.6.1.4.1.20044.96.3.2.16.1 | RowpmcryptoMesrclientTxTempEntry | not-accessible | current | Row definition for the pmcryptoMesrclientTxTemp table |
| 1.3.6.1.4.1.20044.96.3.2.16.1.1 | ColumnpmcryptoMesrclientTxTempIndex | read-only | current | Index definition for the pmcryptoMesrclientTxTemp table |
| 1.3.6.1.4.1.20044.96.3.2.16.1.2 | ColumnpmcryptoMesrclientTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.96.3.2.48 | TablepmcryptoMesrclientTxBiasTable | not-accessible | current | List of pmcryptoMesrclientTxBias Article |
| 1.3.6.1.4.1.20044.96.3.2.48.1 | RowpmcryptoMesrclientTxBiasEntry | not-accessible | current | Row definition for the pmcryptoMesrclientTxBias table |
| 1.3.6.1.4.1.20044.96.3.2.48.1.1 | ColumnpmcryptoMesrclientTxBiasIndex | read-only | current | Index definition for the pmcryptoMesrclientTxBias table |
| 1.3.6.1.4.1.20044.96.3.2.48.1.2 | ColumnpmcryptoMesrclientTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (… |
| 1.3.6.1.4.1.20044.96.3.2.80 | TablepmcryptoMesrclientTxPwrTable | not-accessible | current | List of pmcryptoMesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.96.3.2.80.1 | RowpmcryptoMesrclientTxPwrEntry | not-accessible | current | Row definition for the pmcryptoMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.96.3.2.80.1.1 | ColumnpmcryptoMesrclientTxPwrIndex | read-only | current | Index definition for the pmcryptoMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.96.3.2.80.1.2 | ColumnpmcryptoMesrclientTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_… |
| 1.3.6.1.4.1.20044.96.3.2.112 | TablepmcryptoMesrclientRxPwrTable | not-accessible | current | List of pmcryptoMesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.96.3.2.112.1 | RowpmcryptoMesrclientRxPwrEntry | not-accessible | current | Row definition for the pmcryptoMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.96.3.2.112.1.1 | ColumnpmcryptoMesrclientRxPwrIndex | read-only | current | Index definition for the pmcryptoMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.96.3.2.112.1.2 | ColumnpmcryptoMesrclientRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16… |
| 1.3.6.1.4.1.20044.96.3.2.416 | TablepmcryptoMesrclientTempMinTable | not-accessible | current | List of pmcryptoMesrclientTempMin Article |
| 1.3.6.1.4.1.20044.96.3.2.416.1 | RowpmcryptoMesrclientTempMinEntry | not-accessible | current | Row definition for the pmcryptoMesrclientTempMin table |
| 1.3.6.1.4.1.20044.96.3.2.416.1.1 | ColumnpmcryptoMesrclientTempMinIndex | read-only | current | Index definition for the pmcryptoMesrclientTempMin table |
| 1.3.6.1.4.1.20044.96.3.2.416.1.2 | ColumnpmcryptoMesrclientTempMinPortn | read-only | current | Min Client Trscv Temperature :This OID gives the minimum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper… |
| 1.3.6.1.4.1.20044.96.3.2.448 | TablepmcryptoMesrclientTempMaxTable | not-accessible | current | List of pmcryptoMesrclientTempMax Article |
| 1.3.6.1.4.1.20044.96.3.2.448.1 | RowpmcryptoMesrclientTempMaxEntry | not-accessible | current | Row definition for the pmcryptoMesrclientTempMax table |
| 1.3.6.1.4.1.20044.96.3.2.448.1.1 | ColumnpmcryptoMesrclientTempMaxIndex | read-only | current | Index definition for the pmcryptoMesrclientTempMax table |
| 1.3.6.1.4.1.20044.96.3.2.448.1.2 | ColumnpmcryptoMesrclientTempMaxPortn | read-only | current | Max Client Trscv Temperature :This OID gives the maximum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper… |
| 1.3.6.1.4.1.20044.96.3.3 | NodepmcryptoMesrLine | |||
| 1.3.6.1.4.1.20044.96.3.3.144 | TablepmcryptoMesrlineTxPwrMinTable | not-accessible | current | List of pmcryptoMesrlineTxPwrMin Article |
| 1.3.6.1.4.1.20044.96.3.3.144.1 | RowpmcryptoMesrlineTxPwrMinEntry | not-accessible | current | Row definition for the pmcryptoMesrlineTxPwrMin table |
| 1.3.6.1.4.1.20044.96.3.3.144.1.1 | ColumnpmcryptoMesrlineTxPwrMinIndex | read-only | current | Index definition for the pmcryptoMesrlineTxPwrMin table |
| 1.3.6.1.4.1.20044.96.3.3.144.1.2 | ColumnpmcryptoMesrlineTxPwrMinPortn | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic… |
| 1.3.6.1.4.1.20044.96.3.3.160 | TablepmcryptoMesrlineTxCompositePwrTable | not-accessible | current | List of pmcryptoMesrlineTxCompositePwr Article |
| 1.3.6.1.4.1.20044.96.3.3.160.1 | RowpmcryptoMesrlineTxCompositePwrEntry | not-accessible | current | Row definition for the pmcryptoMesrlineTxCompositePwr table |
| 1.3.6.1.4.1.20044.96.3.3.160.1.1 | ColumnpmcryptoMesrlineTxCompositePwrIndex | read-only | current | Index definition for the pmcryptoMesrlineTxCompositePwr table |
| 1.3.6.1.4.1.20044.96.3.3.160.1.2 | ColumnpmcryptoMesrlineTxCompositePwrPortn | read-only | current | Line Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Line Transceiver, read from the… |
| 1.3.6.1.4.1.20044.96.3.3.176 | TablepmcryptoMesrlineRxPwrMinTable | not-accessible | current | List of pmcryptoMesrlineRxPwrMin Article |
| 1.3.6.1.4.1.20044.96.3.3.176.1 | RowpmcryptoMesrlineRxPwrMinEntry | not-accessible | current | Row definition for the pmcryptoMesrlineRxPwrMin table |
| 1.3.6.1.4.1.20044.96.3.3.176.1.1 | ColumnpmcryptoMesrlineRxPwrMinIndex | read-only | current | Index definition for the pmcryptoMesrlineRxPwrMin table |
| 1.3.6.1.4.1.20044.96.3.3.176.1.2 | ColumnpmcryptoMesrlineRxPwrMinPortn | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic … |
| 1.3.6.1.4.1.20044.96.3.3.192 | TablepmcryptoMesrlineRxCompositePwrTable | not-accessible | current | List of pmcryptoMesrlineRxCompositePwr Article |
| 1.3.6.1.4.1.20044.96.3.3.192.1 | RowpmcryptoMesrlineRxCompositePwrEntry | not-accessible | current | Row definition for the pmcryptoMesrlineRxCompositePwr table |
| 1.3.6.1.4.1.20044.96.3.3.192.1.1 | ColumnpmcryptoMesrlineRxCompositePwrIndex | read-only | current | Index definition for the pmcryptoMesrlineRxCompositePwr table |
| 1.3.6.1.4.1.20044.96.3.3.192.1.2 | ColumnpmcryptoMesrlineRxCompositePwrPortn | read-only | current | Line Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.96.3.3.208 | TablepmcryptoMesrlineTxPwrMaxTable | not-accessible | current | List of pmcryptoMesrlineTxPwrMax Article |
| 1.3.6.1.4.1.20044.96.3.3.208.1 | RowpmcryptoMesrlineTxPwrMaxEntry | not-accessible | current | Row definition for the pmcryptoMesrlineTxPwrMax table |
| 1.3.6.1.4.1.20044.96.3.3.208.1.1 | ColumnpmcryptoMesrlineTxPwrMaxIndex | read-only | current | Index definition for the pmcryptoMesrlineTxPwrMax table |
| 1.3.6.1.4.1.20044.96.3.3.208.1.2 | ColumnpmcryptoMesrlineTxPwrMaxPortn | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic… |
| 1.3.6.1.4.1.20044.96.3.3.240 | TablepmcryptoMesrlineRxPwrMaxTable | not-accessible | current | List of pmcryptoMesrlineRxPwrMax Article |
| 1.3.6.1.4.1.20044.96.3.3.240.1 | RowpmcryptoMesrlineRxPwrMaxEntry | not-accessible | current | Row definition for the pmcryptoMesrlineRxPwrMax table |
| 1.3.6.1.4.1.20044.96.3.3.240.1.1 | ColumnpmcryptoMesrlineRxPwrMaxIndex | read-only | current | Index definition for the pmcryptoMesrlineRxPwrMax table |
| 1.3.6.1.4.1.20044.96.3.3.240.1.2 | ColumnpmcryptoMesrlineRxPwrMaxPortn | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.96.3.3.492 | ScalarpmcryptoMesrlineTempMin | read-only | current | Min Line Trscv Temperature :This OID gives the minimum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur… |
| 1.3.6.1.4.1.20044.96.3.3.496 | ScalarpmcryptoMesrlineTempMax | read-only | current | Max Line Trscv Temperature :This OID gives the maximum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur… |
| 1.3.6.1.4.1.20044.96.4 | Nodepmcryptocounters | |||
| 1.3.6.1.4.1.20044.96.4.1 | NodepmcryptoCntOther | |||
| 1.3.6.1.4.1.20044.96.4.2 | NodepmcryptoCntClient | |||
| 1.3.6.1.4.1.20044.96.4.2.112 | TablepmcryptoCntclientInputErrorCounterTable | not-accessible | current | List of pmcryptoCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.96.4.2.112.1 | RowpmcryptoCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pmcryptoCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.2.112.1.1 | ColumnpmcryptoCntclientInputErrorCounterIndex | read-only | current | Index definition for the pmcryptoCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.2.112.1.2 | ColumnpmcryptoCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.96.4.2.112.1.3 | ColumnpmcryptoCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.2.112.1.4 | ColumnpmcryptoCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.2.144 | TablepmcryptoCntclientCbipCounterTable | not-accessible | current | List of pmcryptoCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.96.4.2.144.1 | RowpmcryptoCntclientCbipCounterEntry | not-accessible | current | Row definition for the pmcryptoCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.96.4.2.144.1.1 | ColumnpmcryptoCntclientCbipCounterIndex | read-only | current | Index definition for the pmcryptoCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.96.4.2.144.1.2 | ColumnpmcryptoCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.96.4.2.144.1.3 | ColumnpmcryptoCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.2.144.1.4 | ColumnpmcryptoCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.3 | NodepmcryptoCntLine | |||
| 1.3.6.1.4.1.20044.96.4.3.192 | TablepmcryptoCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pmcryptoCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.192.1 | RowpmcryptoCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pmcryptoCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.192.1.1 | ColumnpmcryptoCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pmcryptoCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.192.1.2 | ColumnpmcryptoCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate af… |
| 1.3.6.1.4.1.20044.96.4.3.192.1.3 | ColumnpmcryptoCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.3.192.1.4 | ColumnpmcryptoCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.3.193 | TablepmcryptoCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pmcryptoCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.193.1 | RowpmcryptoCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pmcryptoCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.96.4.3.193.1.1 | ColumnpmcryptoCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pmcryptoCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.96.4.3.193.1.2 | ColumnpmcryptoCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.96.4.3.193.1.3 | ColumnpmcryptoCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.96.4.3.193.1.4 | ColumnpmcryptoCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.96.4.3.194 | TablepmcryptoCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pmcryptoCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.194.1 | RowpmcryptoCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pmcryptoCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.194.1.1 | ColumnpmcryptoCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pmcryptoCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.194.1.2 | ColumnpmcryptoCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.96.4.3.194.1.3 | ColumnpmcryptoCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.96.4.3.194.1.4 | ColumnpmcryptoCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.96.4.3.195 | TablepmcryptoCntlineDfrmTimCntTable | not-accessible | current | List of pmcryptoCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.96.4.3.195.1 | RowpmcryptoCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pmcryptoCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.96.4.3.195.1.1 | ColumnpmcryptoCntlineDfrmTimCntIndex | read-only | current | Index definition for the pmcryptoCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.96.4.3.195.1.2 | ColumnpmcryptoCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.96.4.3.195.1.3 | ColumnpmcryptoCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.3.195.1.4 | ColumnpmcryptoCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.3.196 | TablepmcryptoCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of pmcryptoCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.196.1 | RowpmcryptoCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the pmcryptoCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.196.1.1 | ColumnpmcryptoCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the pmcryptoCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.196.1.2 | ColumnpmcryptoCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre-SD FEC Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft … |
| 1.3.6.1.4.1.20044.96.4.3.196.1.3 | ColumnpmcryptoCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.3.196.1.4 | ColumnpmcryptoCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.3.197 | TablepmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of pmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.197.1 | RowpmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the pmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.197.1.1 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the pmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.96.4.3.197.1.2 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat… |
| 1.3.6.1.4.1.20044.96.4.3.197.1.3 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.3.197.1.4 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.3.198 | TablepmcryptoCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of pmcryptoCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.198.1 | RowpmcryptoCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the pmcryptoCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.96.4.3.198.1.1 | ColumnpmcryptoCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the pmcryptoCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.96.4.3.198.1.2 | ColumnpmcryptoCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.96.4.3.198.1.3 | ColumnpmcryptoCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.3.198.1.4 | ColumnpmcryptoCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.96.4.3.199 | TablepmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of pmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.96.4.3.199.1 | RowpmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the pmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.96.4.3.199.1.1 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the pmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.96.4.3.199.1.2 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.96.4.3.199.1.3 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.96.4.3.199.1.4 | ColumnpmcryptoCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.96.6 | NodepmcryptocontrolsWrite | |||
| 1.3.6.1.4.1.20044.96.6.1 | NodepmcryptoCtrlOther | |||
| 1.3.6.1.4.1.20044.96.6.1.1 | NodepmcryptoCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.96.6.1.1.1 | ScalarpmcryptoCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.96.6.1.1.2 | ScalarpmcryptoCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.96.6.1.1.10 | ScalarpmcryptoCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.96.6.1.1.14 | ScalarpmcryptoCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.96.6.1.4 | NodepmcryptoCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.96.6.1.4.1 | ScalarpmcryptoCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.96.6.1.4.2 | ScalarpmcryptoCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.96.6.1.5 | NodepmcryptoCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.96.6.1.5.2 | ScalarpmcryptoCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.96.6.1.5.3 | ScalarpmcryptoCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.96.6.1.5.5 | ScalarpmcryptoCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.96.6.1.5.6 | ScalarpmcryptoCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.96.6.1.6 | NodepmcryptoCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.96.6.1.6.1 | ScalarpmcryptoCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.96.6.1.6.5 | ScalarpmcryptoCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.96.6.1.6.6 | ScalarpmcryptoCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.96.6.1.6.7 | ScalarpmcryptoCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.96.6.1.6.8 | ScalarpmcryptoCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.96.6.1.192 | NodepmcryptoCtrlledTest | |||
| 1.3.6.1.4.1.20044.96.6.1.192.1 | ScalarpmcryptoCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.96.6.1.192.2 | ScalarpmcryptoCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.96.6.1.192.3 | ScalarpmcryptoCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.96.6.1.201 | NodepmcryptoCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.96.6.1.201.1 | ScalarpmcryptoCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.96.6.1.259 | NodepmcryptoCtrlresetCount | |||
| 1.3.6.1.4.1.20044.96.6.1.259.1 | ScalarpmcryptoCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.96.6.1.260 | NodepmcryptoCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.96.6.1.260.1 | ScalarpmcryptoCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.96.6.1.261 | NodepmcryptoCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.96.6.1.261.1 | ScalarpmcryptoCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.96.6.2 | NodepmcryptoCtrlClient | |||
| 1.3.6.1.4.1.20044.96.6.2.16 | TablepmcryptoCtrlaccessLoopTable | not-accessible | current | List of pmcryptoCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.96.6.2.16.1 | RowpmcryptoCtrlaccessLoopEntry | not-accessible | current | Row definition for the pmcryptoCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.96.6.2.16.1.1 | ColumnpmcryptoCtrlaccessLoopIndex | read-only | current | Index definition for the pmcryptoCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.96.6.2.16.1.2 | ColumnpmcryptoCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.96.6.2.17 | TablepmcryptoCtrlclientLoopToLineTable | not-accessible | current | List of pmcryptoCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.96.6.2.17.1 | RowpmcryptoCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pmcryptoCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.96.6.2.17.1.1 | ColumnpmcryptoCtrlclientLoopToLineIndex | read-only | current | Index definition for the pmcryptoCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.96.6.2.17.1.2 | ColumnpmcryptoCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.96.6.2.21 | TablepmcryptoCtrlcsfUpInsTable | not-accessible | current | List of pmcryptoCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.96.6.2.21.1 | RowpmcryptoCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pmcryptoCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.96.6.2.21.1.1 | ColumnpmcryptoCtrlcsfUpInsIndex | read-only | current | Index definition for the pmcryptoCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.96.6.2.21.1.2 | ColumnpmcryptoCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.96.6.2.22 | TablepmcryptoCtrlcaisDwInsTable | not-accessible | current | List of pmcryptoCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.96.6.2.22.1 | RowpmcryptoCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pmcryptoCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.96.6.2.22.1.1 | ColumnpmcryptoCtrlcaisDwInsIndex | read-only | current | Index definition for the pmcryptoCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.96.6.2.22.1.2 | ColumnpmcryptoCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.96.6.2.262 | TablepmcryptoCtrlclientResetAllCountTable | not-accessible | current | List of pmcryptoCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.96.6.2.262.1 | RowpmcryptoCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pmcryptoCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.96.6.2.262.1.1 | ColumnpmcryptoCtrlclientResetAllCountIndex | read-only | current | Index definition for the pmcryptoCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.96.6.2.262.1.2 | ColumnpmcryptoCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.96.6.3 | NodepmcryptoCtrlLine | |||
| 1.3.6.1.4.1.20044.96.6.3.64 | TablepmcryptoCtrlcommAccessLoopTable | not-accessible | current | List of pmcryptoCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.96.6.3.64.1 | RowpmcryptoCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pmcryptoCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.96.6.3.64.1.1 | ColumnpmcryptoCtrlcommAccessLoopIndex | read-only | current | Index definition for the pmcryptoCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.96.6.3.64.1.2 | ColumnpmcryptoCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.96.6.3.66 | TablepmcryptoCtrllineLoopTable | not-accessible | current | List of pmcryptoCtrllineLoop Article |
| 1.3.6.1.4.1.20044.96.6.3.66.1 | RowpmcryptoCtrllineLoopEntry | not-accessible | current | Row definition for the pmcryptoCtrllineLoop table |
| 1.3.6.1.4.1.20044.96.6.3.66.1.1 | ColumnpmcryptoCtrllineLoopIndex | read-only | current | Index definition for the pmcryptoCtrllineLoop table |
| 1.3.6.1.4.1.20044.96.6.3.66.1.2 | ColumnpmcryptoCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.96.6.3.69 | TablepmcryptoCtrlfecDisableTable | not-accessible | current | List of pmcryptoCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.96.6.3.69.1 | RowpmcryptoCtrlfecDisableEntry | not-accessible | current | Row definition for the pmcryptoCtrlfecDisable table |
| 1.3.6.1.4.1.20044.96.6.3.69.1.1 | ColumnpmcryptoCtrlfecDisableIndex | read-only | current | Index definition for the pmcryptoCtrlfecDisable table |
| 1.3.6.1.4.1.20044.96.6.3.69.1.2 | ColumnpmcryptoCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.96.6.3.209 | TablepmcryptoCtrlmsaLineLoopTable | not-accessible | current | List of pmcryptoCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.96.6.3.209.1 | RowpmcryptoCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pmcryptoCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.96.6.3.209.1.1 | ColumnpmcryptoCtrlmsaLineLoopIndex | read-only | current | Index definition for the pmcryptoCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.96.6.3.209.1.2 | ColumnpmcryptoCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.96.6.3.210 | TablepmcryptoCtrlmsaTxResetTable | not-accessible | current | List of pmcryptoCtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.96.6.3.210.1 | RowpmcryptoCtrlmsaTxResetEntry | not-accessible | current | Row definition for the pmcryptoCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.96.6.3.210.1.1 | ColumnpmcryptoCtrlmsaTxResetIndex | read-only | current | Index definition for the pmcryptoCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.96.6.3.210.1.2 | ColumnpmcryptoCtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.96.6.3.211 | TablepmcryptoCtrlmsaRxResetTable | not-accessible | current | List of pmcryptoCtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.96.6.3.211.1 | RowpmcryptoCtrlmsaRxResetEntry | not-accessible | current | Row definition for the pmcryptoCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.96.6.3.211.1.1 | ColumnpmcryptoCtrlmsaRxResetIndex | read-only | current | Index definition for the pmcryptoCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.96.6.3.211.1.2 | ColumnpmcryptoCtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.96.6.3.212 | TablepmcryptoCtrlmsaShutdownTable | not-accessible | current | List of pmcryptoCtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.96.6.3.212.1 | RowpmcryptoCtrlmsaShutdownEntry | not-accessible | current | Row definition for the pmcryptoCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.96.6.3.212.1.1 | ColumnpmcryptoCtrlmsaShutdownIndex | read-only | current | Index definition for the pmcryptoCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.96.6.3.212.1.2 | ColumnpmcryptoCtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.96.6.3.221 | TablepmcryptoCtrlforceKeyExchangeTable | not-accessible | deprecated | List of pmcryptoCtrlforceKeyExchange Article |
| 1.3.6.1.4.1.20044.96.6.3.221.1 | RowpmcryptoCtrlforceKeyExchangeEntry | not-accessible | deprecated | Row definition for the pmcryptoCtrlforceKeyExchange table |
| 1.3.6.1.4.1.20044.96.6.3.221.1.1 | ColumnpmcryptoCtrlforceKeyExchangeIndex | read-only | deprecated | Index definition for the pmcryptoCtrlforceKeyExchange table |
| 1.3.6.1.4.1.20044.96.6.3.221.1.2 | ColumnpmcryptoCtrlforceKeyExchangePortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.96.6.3.222 | TablepmcryptoCtrldisableEncryptionTable | not-accessible | deprecated | List of pmcryptoCtrldisableEncryption Article |
| 1.3.6.1.4.1.20044.96.6.3.222.1 | RowpmcryptoCtrldisableEncryptionEntry | not-accessible | deprecated | Row definition for the pmcryptoCtrldisableEncryption table |
| 1.3.6.1.4.1.20044.96.6.3.222.1.1 | ColumnpmcryptoCtrldisableEncryptionIndex | read-only | deprecated | Index definition for the pmcryptoCtrldisableEncryption table |
| 1.3.6.1.4.1.20044.96.6.3.222.1.2 | ColumnpmcryptoCtrldisableEncryptionPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.96.6.3.223 | TablepmcryptoCtrlresetMonitoringTable | not-accessible | deprecated | List of pmcryptoCtrlresetMonitoring Article |
| 1.3.6.1.4.1.20044.96.6.3.223.1 | RowpmcryptoCtrlresetMonitoringEntry | not-accessible | deprecated | Row definition for the pmcryptoCtrlresetMonitoring table |
| 1.3.6.1.4.1.20044.96.6.3.223.1.1 | ColumnpmcryptoCtrlresetMonitoringIndex | read-only | deprecated | Index definition for the pmcryptoCtrlresetMonitoring table |
| 1.3.6.1.4.1.20044.96.6.3.223.1.2 | ColumnpmcryptoCtrlresetMonitoringPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.96.6.3.263 | TablepmcryptoCtrllineResetAllCountTable | not-accessible | current | List of pmcryptoCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.96.6.3.263.1 | RowpmcryptoCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pmcryptoCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.96.6.3.263.1.1 | ColumnpmcryptoCtrllineResetAllCountIndex | read-only | current | Index definition for the pmcryptoCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.96.6.3.263.1.2 | ColumnpmcryptoCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.96.7 | Nodepmcryptori | |||
| 1.3.6.1.4.1.20044.96.7.1 | NodepmcryptoriTable | |||
| 1.3.6.1.4.1.20044.96.7.1.1 | TablepmcryptoRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.96.7.1.1.1 | RowpmcryptoRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.96.7.1.1.1.1 | ColumnpmcryptoRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.96.7.1.1.1.2 | ColumnpmcryptoRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.96.7.1.2 | TablepmcryptoRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.96.7.1.2.1 | RowpmcryptoRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.96.7.1.2.1.1 | ColumnpmcryptoRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.96.7.1.2.1.2 | ColumnpmcryptoRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.96.7.2 | ScalarpmcryptoRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.96.7.3 | ScalarpmcryptoRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.96.7.4 | ScalarpmcryptoRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.96.7.5 | ScalarpmcryptoRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.96.7.6 | ScalarpmcryptoRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.96.8 | Nodepmcryptodownload | |||
| 1.3.6.1.4.1.20044.96.8.1 | NodepmcryptoDwlOther | |||
| 1.3.6.1.4.1.20044.96.8.1.0 | NodepmcryptoDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.96.8.1.0.1 | ScalarpmcryptoDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.96.8.1.0.2 | ScalarpmcryptoDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.96.8.1.1 | NodepmcryptoDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.96.8.1.1.1 | ScalarpmcryptoDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.96.8.1.1.2 | ScalarpmcryptoDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.96.8.1.1.5 | ScalarpmcryptoDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.96.8.1.1.6 | ScalarpmcryptoDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.96.8.1.2 | NodepmcryptoDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.96.8.1.2.1 | ScalarpmcryptoDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.96.8.1.2.2 | ScalarpmcryptoDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.96.8.1.2.3 | ScalarpmcryptoDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.96.8.1.2.4 | ScalarpmcryptoDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.96.8.1.2.5 | ScalarpmcryptoDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.96.8.1.2.6 | ScalarpmcryptoDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.96.8.1.2.7 | ScalarpmcryptoDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.96.8.1.2.8 | ScalarpmcryptoDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.96.8.2 | NodepmcryptoDwlClient | |||
| 1.3.6.1.4.1.20044.96.8.3 | NodepmcryptoDwlLine | |||
| 1.3.6.1.4.1.20044.96.9 | NodepmcryptoConfig | |||
| 1.3.6.1.4.1.20044.96.9.1 | NodepmcryptoCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.96.9.1.1 | TablepmcryptoCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.1.1.1 | RowpmcryptoCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.96.9.1.1.1.1 | ColumnpmcryptoCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.96.9.1.1.1.3 | ColumnpmcryptoCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.96.9.2 | NodepmcryptoCfgStartup | |||
| 1.3.6.1.4.1.20044.96.9.2.1 | TablepmcryptoCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.2.1.1 | RowpmcryptoCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.96.9.2.1.1.1 | ColumnpmcryptoCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.96.9.2.1.1.3 | ColumnpmcryptoCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.96.9.2.1.1.4 | ColumnpmcryptoCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.96.9.2.1.1.14 | ColumnpmcryptoCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.96.9.2.2 | TablepmcryptoCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.2.2.1 | RowpmcryptoCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.96.9.2.2.1.1 | ColumnpmcryptoCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.96.9.2.2.1.3 | ColumnpmcryptoCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.96.9.2.2.1.14 | ColumnpmcryptoCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.96.9.2.3 | TablepmcryptoCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.2.3.1 | RowpmcryptoCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.96.9.2.3.1.1 | ColumnpmcryptoCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.96.9.2.3.1.3 | ColumnpmcryptoCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.96.9.3 | NodepmcryptoCfgLabels | |||
| 1.3.6.1.4.1.20044.96.9.3.1 | TablepmcryptoCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.3.1.1 | RowpmcryptoCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.96.9.3.1.1.1 | ColumnpmcryptoCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.96.9.3.1.1.3 | ColumnpmcryptoCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.96.9.3.2 | TablepmcryptoCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.3.2.1 | RowpmcryptoCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.96.9.3.2.1.1 | ColumnpmcryptoCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.96.9.3.2.1.3 | ColumnpmcryptoCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.96.9.4 | NodepmcryptoCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.96.9.4.1 | TablepmcryptoCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.4.1.1 | RowpmcryptoCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.96.9.4.1.1.1 | ColumnpmcryptoCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.96.9.4.1.1.6 | ColumnpmcryptoCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.96.9.4.1.1.7 | ColumnpmcryptoCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.96.9.4.1.1.8 | ColumnpmcryptoCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.96.9.4.1.1.9 | ColumnpmcryptoCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.96.9.4.1.1.10 | ColumnpmcryptoCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.96.9.5 | NodepmcryptoCfgOther | |||
| 1.3.6.1.4.1.20044.96.9.5.1 | NodepmcryptotablemoduleOther | |||
| 1.3.6.1.4.1.20044.96.9.5.1.2 | ScalarpmcryptoCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.96.9.5.1.3 | ScalarpmcryptoCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.96.9.5.1.4 | ScalarpmcryptoCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.96.9.5.1.5 | ScalarpmcryptoCfgprotocolMode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.96.9.6 | NodepmcryptoCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.96.9.6.1 | TablepmcryptoCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.96.9.6.1.1 | RowpmcryptoCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.96.9.6.1.1.1 | ColumnpmcryptoCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.96.9.6.1.1.3 | ColumnpmcryptoCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.96.9.6.1.1.4 | ColumnpmcryptoCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.96.9.6.1.1.5 | ColumnpmcryptoCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.96.9.6.1.1.6 | ColumnpmcryptoCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.96.9.6.1.1.7 | ColumnpmcryptoCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.96.9.257 | ScalarpmcryptoCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.96.10 | Nodepmcryptotraps | |||
| 1.3.6.1.4.1.20044.96.10.2 | ScalarpmcryptotrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.96.10.3 | ScalarpmcryptotrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.96.10.4 | ScalarpmcryptotrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.96.10.30 | NotificationpmcryptoLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.96.10.31 | NotificationpmcryptoLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.96.10.32 | NotificationpmcryptoLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.96.10.33 | NotificationpmcryptoLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.96.10.34 | NotificationpmcryptoLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.96.10.35 | NotificationpmcryptoLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.96.10.40 | NotificationpmcryptoClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.96.10.41 | NotificationpmcryptoClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.96.10.42 | NotificationpmcryptoClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.96.10.43 | NotificationpmcryptoClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.96.10.44 | NotificationpmcryptoClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.96.10.45 | NotificationpmcryptoClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.96.10.50 | NotificationpmcryptoPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.96.10.51 | NotificationpmcryptoPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.96.11 | NodepmcryptoMonitoring | |||
| 1.3.6.1.4.1.20044.96.11.1 | NodepmcryptoMonOther | |||
| 1.3.6.1.4.1.20044.96.11.1.3 | NodepmcryptoMonRmon | |||
| 1.3.6.1.4.1.20044.96.11.2 | NodepmcryptoMonClient | |||
| 1.3.6.1.4.1.20044.96.11.2.4 | NodepmcryptoMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.96.11.2.4.16 | TablepmcryptoMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.16.1 | RowpmcryptoMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.16.1.1 | ColumnpmcryptoMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.16.1.2 | ColumnpmcryptoMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.96.11.2.4.16.1.3 | ColumnpmcryptoMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.16.1.4 | ColumnpmcryptoMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.48 | TablepmcryptoMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.48.1 | RowpmcryptoMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.48.1.1 | ColumnpmcryptoMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.48.1.2 | ColumnpmcryptoMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.96.11.2.4.48.1.3 | ColumnpmcryptoMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.48.1.4 | ColumnpmcryptoMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.80 | TablepmcryptoMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.80.1 | RowpmcryptoMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.80.1.1 | ColumnpmcryptoMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.80.1.2 | ColumnpmcryptoMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.96.11.2.4.80.1.3 | ColumnpmcryptoMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.80.1.4 | ColumnpmcryptoMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.112 | TablepmcryptoMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.112.1 | RowpmcryptoMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.112.1.1 | ColumnpmcryptoMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.112.1.2 | ColumnpmcryptoMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.96.11.2.4.112.1.3 | ColumnpmcryptoMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.112.1.4 | ColumnpmcryptoMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.144 | TablepmcryptoMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.144.1 | RowpmcryptoMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.144.1.1 | ColumnpmcryptoMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.144.1.2 | ColumnpmcryptoMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.96.11.2.4.144.1.3 | ColumnpmcryptoMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.144.1.4 | ColumnpmcryptoMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.176 | TablepmcryptoMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.176.1 | RowpmcryptoMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.176.1.1 | ColumnpmcryptoMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.176.1.2 | ColumnpmcryptoMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.96.11.2.4.176.1.3 | ColumnpmcryptoMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.176.1.4 | ColumnpmcryptoMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.304 | TablepmcryptoMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.304.1 | RowpmcryptoMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.304.1.1 | ColumnpmcryptoMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.304.1.2 | ColumnpmcryptoMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.96.11.2.4.304.1.3 | ColumnpmcryptoMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.304.1.4 | ColumnpmcryptoMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.336 | TablepmcryptoMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pmcryptoMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.336.1 | RowpmcryptoMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pmcryptoMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.336.1.1 | ColumnpmcryptoMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pmcryptoMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.96.11.2.4.336.1.2 | ColumnpmcryptoMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.96.11.2.4.336.1.3 | ColumnpmcryptoMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.336.1.4 | ColumnpmcryptoMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.400 | TablepmcryptoMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.400.1 | RowpmcryptoMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.400.1.1 | ColumnpmcryptoMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.400.1.2 | ColumnpmcryptoMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.96.11.2.4.400.1.3 | ColumnpmcryptoMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.400.1.4 | ColumnpmcryptoMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.432 | TablepmcryptoMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.432.1 | RowpmcryptoMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.432.1.1 | ColumnpmcryptoMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.432.1.2 | ColumnpmcryptoMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.96.11.2.4.432.1.3 | ColumnpmcryptoMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.432.1.4 | ColumnpmcryptoMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.464 | TablepmcryptoMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.464.1 | RowpmcryptoMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.464.1.1 | ColumnpmcryptoMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.464.1.2 | ColumnpmcryptoMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.96.11.2.4.464.1.3 | ColumnpmcryptoMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.464.1.4 | ColumnpmcryptoMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.496 | TablepmcryptoMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.496.1 | RowpmcryptoMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.496.1.1 | ColumnpmcryptoMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.496.1.2 | ColumnpmcryptoMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.96.11.2.4.496.1.3 | ColumnpmcryptoMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.496.1.4 | ColumnpmcryptoMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.528 | TablepmcryptoMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.528.1 | RowpmcryptoMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.528.1.1 | ColumnpmcryptoMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.528.1.2 | ColumnpmcryptoMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.96.11.2.4.528.1.3 | ColumnpmcryptoMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.528.1.4 | ColumnpmcryptoMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.560 | TablepmcryptoMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.560.1 | RowpmcryptoMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.560.1.1 | ColumnpmcryptoMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.560.1.2 | ColumnpmcryptoMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.96.11.2.4.560.1.3 | ColumnpmcryptoMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.560.1.4 | ColumnpmcryptoMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.688 | TablepmcryptoMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.688.1 | RowpmcryptoMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.688.1.1 | ColumnpmcryptoMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.688.1.2 | ColumnpmcryptoMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.96.11.2.4.688.1.3 | ColumnpmcryptoMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.688.1.4 | ColumnpmcryptoMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.720 | TablepmcryptoMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pmcryptoMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.96.11.2.4.720.1 | RowpmcryptoMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pmcryptoMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.720.1.1 | ColumnpmcryptoMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pmcryptoMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.96.11.2.4.720.1.2 | ColumnpmcryptoMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.96.11.2.4.720.1.3 | ColumnpmcryptoMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.96.11.2.4.720.1.4 | ColumnpmcryptoMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.96.11.5 | NodepmcryptoMonPerfOther | |||
| 1.3.6.1.4.1.20044.96.11.5.1 | NodepmcryptoMonPerfSync | |||
| 1.3.6.1.4.1.20044.96.11.5.1.257 | ScalarpmcryptoPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.96.11.5.1.259 | ScalarpmcryptoPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.96.11.5.1.260 | ScalarpmcryptoPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.96.11.5.2 | NodepmcryptoMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.96.11.5.2.1 | ScalarpmcryptoPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.96.11.5.2.2 | ScalarpmcryptoPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.96.11.5.2.5 | ScalarpmcryptoPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.96.11.5.2.6 | ScalarpmcryptoPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.96.11.5.2.7 | ScalarpmcryptoPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.96.11.5.2.8 | ScalarpmcryptoPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.96.11.6 | NodepmcryptoMonPerfClient | |||
| 1.3.6.1.4.1.20044.96.11.6.16 | TablepmcryptoPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pmcryptoPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.96.11.6.16.1 | RowpmcryptoPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.6.16.1.1 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.6.16.1.2 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.16.1.3 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.16.1.4 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.16.1.5 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.16.1.6 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.16.1.7 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.16.1.8 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.16.1.9 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.16.1.10 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.16.1.11 | ColumnpmcryptoPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.48 | TablepmcryptoPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.6.48.1 | RowpmcryptoPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.48.1.1 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.48.1.2 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.48.1.3 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.48.1.4 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.48.1.5 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.48.1.6 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.48.1.7 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.48.1.8 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.48.1.9 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.48.1.10 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.48.1.11 | ColumnpmcryptoPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.80 | TablepmcryptoPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pmcryptoPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.96.11.6.80.1 | RowpmcryptoPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.6.80.1.1 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.6.80.1.2 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.80.1.3 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.80.1.4 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.80.1.5 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.80.1.6 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.80.1.7 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.80.1.8 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.80.1.9 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.80.1.10 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.80.1.11 | ColumnpmcryptoPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.112 | TablepmcryptoPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.6.112.1 | RowpmcryptoPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.112.1.1 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.112.1.2 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.112.1.3 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.112.1.4 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.112.1.5 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.112.1.6 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.112.1.7 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.112.1.8 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.112.1.9 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.112.1.10 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.112.1.11 | ColumnpmcryptoPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.144 | TablepmcryptoPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pmcryptoPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.96.11.6.144.1 | RowpmcryptoPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.6.144.1.1 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.6.144.1.2 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.144.1.3 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.144.1.4 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.144.1.5 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.144.1.6 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.144.1.7 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.144.1.8 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.144.1.9 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.144.1.10 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.144.1.11 | ColumnpmcryptoPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.176 | TablepmcryptoPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.6.176.1 | RowpmcryptoPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.176.1.1 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.176.1.2 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.176.1.3 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.176.1.4 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.176.1.5 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.176.1.6 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.176.1.7 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.176.1.8 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.176.1.9 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.176.1.10 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.176.1.11 | ColumnpmcryptoPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.208 | TablepmcryptoPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pmcryptoPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.96.11.6.208.1 | RowpmcryptoPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.6.208.1.1 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.6.208.1.2 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.208.1.3 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.208.1.4 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.208.1.5 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.208.1.6 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.208.1.7 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.208.1.8 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.208.1.9 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.208.1.10 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.208.1.11 | ColumnpmcryptoPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.240 | TablepmcryptoPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.6.240.1 | RowpmcryptoPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.240.1.1 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.240.1.2 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.240.1.3 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.6.240.1.4 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.240.1.5 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.240.1.6 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.240.1.7 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.240.1.8 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.240.1.9 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.240.1.10 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.240.1.11 | ColumnpmcryptoPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.6.848 | TablepmcryptoPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pmcryptoPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.96.11.6.848.1 | RowpmcryptoPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pmcryptoPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.6.848.1.1 | ColumnpmcryptoPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pmcryptoPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.6.848.1.4 | ColumnpmcryptoperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.848.1.5 | ColumnpmcryptoperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.848.1.6 | ColumnpmcryptoperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.848.1.7 | ColumnpmcryptoperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.96.11.6.848.1.28 | ColumnpmcryptoperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.848.1.29 | ColumnpmcryptoperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.848.1.30 | ColumnpmcryptoperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.848.1.31 | ColumnpmcryptoperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.96.11.6.880 | TablepmcryptoPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.6.880.1 | RowpmcryptoPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.880.1.1 | ColumnpmcryptoPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.880.1.4 | ColumnpmcryptoperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.880.1.5 | ColumnpmcryptoperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.880.1.6 | ColumnpmcryptoperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.880.1.7 | ColumnpmcryptoperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.96.11.6.880.1.28 | ColumnpmcryptoperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.880.1.29 | ColumnpmcryptoperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.880.1.30 | ColumnpmcryptoperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.880.1.31 | ColumnpmcryptoperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.96.11.6.912 | TablepmcryptoPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pmcryptoPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.96.11.6.912.1 | RowpmcryptoPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pmcryptoPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.6.912.1.1 | ColumnpmcryptoPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pmcryptoPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.6.912.1.4 | ColumnpmcryptoperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.912.1.5 | ColumnpmcryptoperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.912.1.6 | ColumnpmcryptoperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.912.1.7 | ColumnpmcryptoperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.96.11.6.912.1.28 | ColumnpmcryptoperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.912.1.29 | ColumnpmcryptoperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.912.1.30 | ColumnpmcryptoperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.912.1.31 | ColumnpmcryptoperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.96.11.6.944 | TablepmcryptoPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.6.944.1 | RowpmcryptoPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.944.1.1 | ColumnpmcryptoPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.6.944.1.4 | ColumnpmcryptoperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.944.1.5 | ColumnpmcryptoperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.944.1.6 | ColumnpmcryptoperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.944.1.7 | ColumnpmcryptoperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.96.11.6.944.1.28 | ColumnpmcryptoperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.944.1.29 | ColumnpmcryptoperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.96.11.6.944.1.30 | ColumnpmcryptoperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.96.11.6.944.1.31 | ColumnpmcryptoperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.96.11.7 | NodepmcryptoMonPerfLine | |||
| 1.3.6.1.4.1.20044.96.11.7.336 | TablepmcryptoPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pmcryptoPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.96.11.7.336.1 | RowpmcryptoPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.7.336.1.1 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.7.336.1.2 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.336.1.3 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.336.1.4 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.336.1.5 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.336.1.6 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.336.1.7 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.336.1.8 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.336.1.9 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.336.1.10 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.336.1.11 | ColumnpmcryptoPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.337 | TablepmcryptoPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.7.337.1 | RowpmcryptoPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.337.1.1 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.337.1.2 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.337.1.3 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.337.1.4 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.337.1.5 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.337.1.6 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.337.1.7 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.337.1.8 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.337.1.9 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.337.1.10 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.337.1.11 | ColumnpmcryptoPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.338 | TablepmcryptoPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pmcryptoPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.96.11.7.338.1 | RowpmcryptoPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.7.338.1.1 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.7.338.1.2 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.338.1.3 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.338.1.4 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.338.1.5 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.338.1.6 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.338.1.7 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.338.1.8 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.338.1.9 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.338.1.10 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.338.1.11 | ColumnpmcryptoPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.339 | TablepmcryptoPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.7.339.1 | RowpmcryptoPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.339.1.1 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.339.1.2 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.339.1.3 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.339.1.4 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.339.1.5 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.339.1.6 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.339.1.7 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.339.1.8 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.339.1.9 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.339.1.10 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.339.1.11 | ColumnpmcryptoPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.352 | TablepmcryptoPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pmcryptoPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.96.11.7.352.1 | RowpmcryptoPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.7.352.1.1 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.96.11.7.352.1.2 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.352.1.3 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.352.1.4 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.352.1.5 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.352.1.6 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.352.1.7 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.353 | TablepmcryptoPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.7.353.1 | RowpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.353.1.1 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.353.1.2 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.353.1.3 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.353.1.4 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.353.1.5 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.353.1.6 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.353.1.7 | ColumnpmcryptoPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.354 | TablepmcryptoPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pmcryptoPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.96.11.7.354.1 | RowpmcryptoPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pmcryptoPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.7.354.1.1 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pmcryptoPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.96.11.7.354.1.2 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.354.1.3 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.354.1.4 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.354.1.5 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.354.1.6 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.354.1.7 | ColumnpmcryptoPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.355 | TablepmcryptoPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pmcryptoPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.96.11.7.355.1 | RowpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmcryptoPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.355.1.1 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pmcryptoPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.96.11.7.355.1.2 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.355.1.3 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.96.11.7.355.1.4 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.355.1.5 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.96.11.7.355.1.6 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.96.11.7.355.1.7 | ColumnpmcryptoPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PmcryptoClientProtocolA | INTEGER { protocolclientvalue0A(1), protocolclientvalue1A(2), protocolclientvalue2A(3) } | current | Different values on the protocol on the client ports |
| PmcryptoClientProtocolB | INTEGER { protocolclientvalue0B(1), protocolclientvalue1B(2), protocolclientvalue2B(3), protocolclientvalue3B(4), protocolclientvalue4B(5) } | current | Different values on the protocol on the client ports |
| PmcryptoClientProtocolC | INTEGER { protocolclientvalue0C(1) } | current | Different values on the protocol on the client ports |
| PmcryptoDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| PmcryptoOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| PmcryptoOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| PmcryptoOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| PmcryptoProtocolMode | INTEGER { protocolmodevalue0(1), protocolmodevalue1(2), protocolmodevalue2(3) } | current | Different values on the protocol mode |