MIB Viewer

EKINOPS-Pmcryptoe100-MIB

848 objects
Creation.
Imported Objects
EKINOPS-MIBEkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.20044.101IdentitymodulePmcryptoe100Creation.
1.3.6.1.4.1.20044.101.2Nodepmcryptoe100alarms
1.3.6.1.4.1.20044.101.2.1Nodepmcryptoe100AlmOther
1.3.6.1.4.1.20044.101.2.1.1Nodepmcryptoe100AlmOtherNurg
1.3.6.1.4.1.20044.101.2.1.1.2Nodepmcryptoe100AlmsynthAlm2
1.3.6.1.4.1.20044.101.2.1.1.2.1Scalarpmcryptoe100AlmConfTableSaveread-onlycurrentPM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor…
1.3.6.1.4.1.20044.101.2.1.1.2.2Scalarpmcryptoe100AlmInvUploadread-onlycurrentInventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot…
1.3.6.1.4.1.20044.101.2.1.1.2.3Scalarpmcryptoe100AlmConfTableLoadread-onlycurrentPM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat…
1.3.6.1.4.1.20044.101.2.1.1.2.4Scalarpmcryptoe100AlmCorrelatOffread-onlycurrentNot Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype…
1.3.6.1.4.1.20044.101.2.1.1.2.5Scalarpmcryptoe100AlmMaintenanceOnread-onlycurrentMaintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> …
1.3.6.1.4.1.20044.101.2.1.2Nodepmcryptoe100AlmOtherUrg
1.3.6.1.4.1.20044.101.2.1.2.336Nodepmcryptoe100AlmmodFanFail
1.3.6.1.4.1.20044.101.2.1.2.336.1Scalarpmcryptoe100AlmFanFailread-onlycurrentFan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition…
1.3.6.1.4.1.20044.101.2.1.2.336.2Scalarpmcryptoe100AlmFanHighSpeedread-onlycurrentFan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro…
1.3.6.1.4.1.20044.101.2.1.3Nodepmcryptoe100AlmOtherCrit
1.3.6.1.4.1.20044.101.2.1.3.0Nodepmcryptoe100AlmsynthAlm0
1.3.6.1.4.1.20044.101.2.1.3.0.2Scalarpmcryptoe100AlmFailFanread-onlycurrentFan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_…
1.3.6.1.4.1.20044.101.2.1.3.0.9Scalarpmcryptoe100AlmModGlobFailread-onlycurrentModule Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip…
1.3.6.1.4.1.20044.101.2.1.3.0.15Scalarpmcryptoe100AlmDefFuseAread-onlycurrentFuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb…
1.3.6.1.4.1.20044.101.2.1.3.0.16Scalarpmcryptoe100AlmDefFuseBread-onlycurrentFuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb…
1.3.6.1.4.1.20044.101.2.1.3.78Nodepmcryptoe100AlmmsaModuleState
1.3.6.1.4.1.20044.101.2.1.3.78.6Scalarpmcryptoe100AlmMsaReadyread-onlycurrentLine Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc…
1.3.6.1.4.1.20044.101.2.1.3.78.7Scalarpmcryptoe100AlmMsaFaultread-onlycurrentLine Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause…
1.3.6.1.4.1.20044.101.2.2Nodepmcryptoe100AlmClient
1.3.6.1.4.1.20044.101.2.2.1Nodepmcryptoe100AlmClientNurg
1.3.6.1.4.1.20044.101.2.2.1.272Tablepmcryptoe100AlmclientSfpWarnDdmTablenot-accessiblecurrentList of pmcryptoe100AlmclientSfpWarnDdm Article
1.3.6.1.4.1.20044.101.2.2.1.272.1Rowpmcryptoe100AlmclientSfpWarnDdmEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmclientSfpWarnDdm table
1.3.6.1.4.1.20044.101.2.2.1.272.1.1Columnpmcryptoe100AlmclientSfpWarnDdmIndexread-onlycurrentIndex definition for the pmcryptoe100AlmclientSfpWarnDdm table
1.3.6.1.4.1.20044.101.2.2.1.272.1.2Columnpmcryptoe100AlmTxPwLowWngPortnread-onlycurrentClient Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning …
1.3.6.1.4.1.20044.101.2.2.1.272.1.3Columnpmcryptoe100AlmTxPwrHighWngPortnread-onlycurrentClient Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin…
1.3.6.1.4.1.20044.101.2.2.1.272.1.4Columnpmcryptoe100AlmTxBiasLowWngPortnread-onlycurrentClient Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin…
1.3.6.1.4.1.20044.101.2.2.1.272.1.5Columnpmcryptoe100AlmTxBiasHighWngPortnread-onlycurrentClient Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn…
1.3.6.1.4.1.20044.101.2.2.1.272.1.6Columnpmcryptoe100AlmVccLowWngPortnread-onlycurrentClient Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn…
1.3.6.1.4.1.20044.101.2.2.1.272.1.7Columnpmcryptoe100AlmVccHighWngPortnread-onlycurrentClient Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa…
1.3.6.1.4.1.20044.101.2.2.1.272.1.8Columnpmcryptoe100AlmTempLowWngPortnread-onlycurrentClient Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic…
1.3.6.1.4.1.20044.101.2.2.1.272.1.9Columnpmcryptoe100AlmTempHighWngPortnread-onlycurrentClient Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind…
1.3.6.1.4.1.20044.101.2.2.1.272.1.16Columnpmcryptoe100AlmRxPwrLowWngPortnread-onlycurrentClient Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i…
1.3.6.1.4.1.20044.101.2.2.1.272.1.17Columnpmcryptoe100AlmRxPwrHighWngPortnread-onlycurrentClient Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning…
1.3.6.1.4.1.20044.101.2.2.2Nodepmcryptoe100AlmClientUrg
1.3.6.1.4.1.20044.101.2.2.2.152Tablepmcryptoe100AlmclientHostLaneFaultTablenot-accessiblecurrentList of pmcryptoe100AlmclientHostLaneFault Article
1.3.6.1.4.1.20044.101.2.2.2.152.1Rowpmcryptoe100AlmclientHostLaneFaultEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmclientHostLaneFault table
1.3.6.1.4.1.20044.101.2.2.2.152.1.1Columnpmcryptoe100AlmclientHostLaneFaultIndexread-onlycurrentIndex definition for the pmcryptoe100AlmclientHostLaneFault table
1.3.6.1.4.1.20044.101.2.2.2.152.1.2Columnpmcryptoe100AlmClientLossOfSyncPortnread-onlycurrentClient Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit…
1.3.6.1.4.1.20044.101.2.2.2.152.1.3Columnpmcryptoe100AlmClientInputLossOfSigPortnread-onlycurrentClient Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl…
1.3.6.1.4.1.20044.101.2.2.2.152.1.4Columnpmcryptoe100AlmClientLanesMarkerUnlockPortnread-onlycurrentClient Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l…
1.3.6.1.4.1.20044.101.2.2.2.152.1.5Columnpmcryptoe100AlmClientLanes6466UnlockPortnread-onlycurrentClient Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C…
1.3.6.1.4.1.20044.101.2.2.2.152.1.6Columnpmcryptoe100AlmClientLanesNotAlignedPortnread-onlycurrentClient Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_…
1.3.6.1.4.1.20044.101.2.2.2.152.1.7Columnpmcryptoe100AlmClientCsfDetectedPortnread-onlycurrentClient Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client…
1.3.6.1.4.1.20044.101.2.2.2.152.1.10Columnpmcryptoe100AlmClientTxHostLolPortnread-onlycurrentClient Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr…
1.3.6.1.4.1.20044.101.2.2.2.152.1.11Columnpmcryptoe100AlmClientLaneTxFifoErrorPortnread-onlycurrentClient Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho…
1.3.6.1.4.1.20044.101.2.2.2.152.1.12Columnpmcryptoe100AlmLfDetectedPortnread-onlycurrentLocal Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is de…
1.3.6.1.4.1.20044.101.2.2.2.152.1.13Columnpmcryptoe100AlmRfDetectedPortnread-onlycurrentRemote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is…
1.3.6.1.4.1.20044.101.2.2.2.152.1.14Columnpmcryptoe100AlmStm64ProtocDetectedPortnread-onlycurrentSTM64 Protocol Detected :This OID indicates a STM64 Protocol detected on the Client Port <Help> Status indicating a STM64 protocol received on the Client side …
1.3.6.1.4.1.20044.101.2.2.2.152.1.15Columnpmcryptoe100Alm10gbeProtocDetectedPortnread-onlycurrent10GbE Protocol Detected :This OID indicates a 10GbE Protocol detected on the Client Port <Help> Status indicating a 10GbE protocol received on the Client side …
1.3.6.1.4.1.20044.101.2.2.2.152.1.16Columnpmcryptoe100AlmOtu2ProtocDetectedPortnread-onlycurrentOTU2 Protocol Detected :This OID indicates an OTU2 Protocol detected on the Client Port <Help> Status indicating a OTU2 protocol received on the Client side <C…
1.3.6.1.4.1.20044.101.2.2.2.152.1.17Columnpmcryptoe100AlmOtu2eProtocDetectedPortnread-onlycurrentOTU2e Protocol Detected :This OID indicates an OTU2e Protocol detected on the Client Port <Help> Status indicating a OTU2e protocol received on the Client side…
1.3.6.1.4.1.20044.101.2.2.2.240Tablepmcryptoe100AlmclientSfpAlmDdmTablenot-accessiblecurrentList of pmcryptoe100AlmclientSfpAlmDdm Article
1.3.6.1.4.1.20044.101.2.2.2.240.1Rowpmcryptoe100AlmclientSfpAlmDdmEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmclientSfpAlmDdm table
1.3.6.1.4.1.20044.101.2.2.2.240.1.1Columnpmcryptoe100AlmclientSfpAlmDdmIndexread-onlycurrentIndex definition for the pmcryptoe100AlmclientSfpAlmDdm table
1.3.6.1.4.1.20044.101.2.2.2.240.1.2Columnpmcryptoe100AlmTxPwrLowAlaPortnread-onlycurrentClient Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in…
1.3.6.1.4.1.20044.101.2.2.2.240.1.3Columnpmcryptoe100AlmTxPwrHighAlaPortnread-onlycurrentClient Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm …
1.3.6.1.4.1.20044.101.2.2.2.240.1.4Columnpmcryptoe100AlmTxBiasLowAlaPortnread-onlycurrentClient Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm …
1.3.6.1.4.1.20044.101.2.2.2.240.1.5Columnpmcryptoe100AlmTxBiasHighAlaPortnread-onlycurrentClient Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar…
1.3.6.1.4.1.20044.101.2.2.2.240.1.6Columnpmcryptoe100AlmVccLowAlaPortnread-onlycurrentClient Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar…
1.3.6.1.4.1.20044.101.2.2.2.240.1.7Columnpmcryptoe100AlmVccHighAlaPortnread-onlycurrentClient Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al…
1.3.6.1.4.1.20044.101.2.2.2.240.1.8Columnpmcryptoe100AlmTempLowAlaPortnread-onlycurrentClient Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat…
1.3.6.1.4.1.20044.101.2.2.2.240.1.9Columnpmcryptoe100AlmTempHighAlaPortnread-onlycurrentClient Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic…
1.3.6.1.4.1.20044.101.2.2.2.240.1.16Columnpmcryptoe100AlmRxPwrLowAlaPortnread-onlycurrentClient Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind…
1.3.6.1.4.1.20044.101.2.2.2.240.1.17Columnpmcryptoe100AlmRxPwrHighAlaPortnread-onlycurrentClient Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i…
1.3.6.1.4.1.20044.101.2.2.2.304Tablepmcryptoe100AlmclientOtnAlmTablenot-accessiblecurrentList of pmcryptoe100AlmclientOtnAlm Article
1.3.6.1.4.1.20044.101.2.2.2.304.1Rowpmcryptoe100AlmclientOtnAlmEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmclientOtnAlm table
1.3.6.1.4.1.20044.101.2.2.2.304.1.1Columnpmcryptoe100AlmclientOtnAlmIndexread-onlycurrentIndex definition for the pmcryptoe100AlmclientOtnAlm table
1.3.6.1.4.1.20044.101.2.2.2.304.1.2Columnpmcryptoe100AlmClientOtu2eDlomPortnread-onlycurrentDLOM :This OID indicates that a Loss Of Multiframe has been detected on client port<Help> This alarm indicates if a Loss Of Multiframe has been detected on the…
1.3.6.1.4.1.20044.101.2.2.3Nodepmcryptoe100AlmClientCrit
1.3.6.1.4.1.20044.101.2.2.3.8Tablepmcryptoe100AlmsynthAlmPortTablenot-accessiblecurrentList of pmcryptoe100AlmsynthAlmPort Article
1.3.6.1.4.1.20044.101.2.2.3.8.1Rowpmcryptoe100AlmsynthAlmPortEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmsynthAlmPort table
1.3.6.1.4.1.20044.101.2.2.3.8.1.1Columnpmcryptoe100AlmsynthAlmPortIndexread-onlycurrentIndex definition for the pmcryptoe100AlmsynthAlmPort table
1.3.6.1.4.1.20044.101.2.2.3.8.1.2Columnpmcryptoe100AlmSfpAbsentPortnread-onlycurrentClient Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver …
1.3.6.1.4.1.20044.101.2.2.3.8.1.3Columnpmcryptoe100AlmDdmAbsentPortnread-onlycurrentDDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates …
1.3.6.1.4.1.20044.101.2.2.3.8.1.5Columnpmcryptoe100AlmHwFailAccPortnread-onlycurrentClient HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro…
1.3.6.1.4.1.20044.101.2.2.3.8.1.6Columnpmcryptoe100AlmDwLsdPortnread-onlycurrentClient Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo…
1.3.6.1.4.1.20044.101.2.2.3.8.1.7Columnpmcryptoe100AlmClientLocalOosPortnread-onlycurrentLocal Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c…
1.3.6.1.4.1.20044.101.2.2.3.8.1.8Columnpmcryptoe100AlmClientRemoteOosPortnread-onlycurrentRemote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot…
1.3.6.1.4.1.20044.101.2.2.3.8.1.9Columnpmcryptoe100AlmDwCaisPortnread-onlycurrentClient AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is…
1.3.6.1.4.1.20044.101.2.2.3.8.1.10Columnpmcryptoe100AlmSfpDdmWarningPortnread-onlycurrentWarning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be…
1.3.6.1.4.1.20044.101.2.2.3.8.1.11Columnpmcryptoe100AlmSfpDdmAlmPortnread-onlycurrentAlarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de…
1.3.6.1.4.1.20044.101.2.2.3.8.1.13Columnpmcryptoe100AlmFailAccPortnread-onlycurrentClient Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> …
1.3.6.1.4.1.20044.101.2.2.3.8.1.17Columnpmcryptoe100AlmUpCsfPortnread-onlycurrentClient Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu…
1.3.6.1.4.1.20044.101.2.3Nodepmcryptoe100AlmLine
1.3.6.1.4.1.20044.101.2.3.1Nodepmcryptoe100AlmLineNurg
1.3.6.1.4.1.20044.101.2.3.1.72Tablepmcryptoe100AlmlineQsfpAlmDdmTablenot-accessiblecurrentList of pmcryptoe100AlmlineQsfpAlmDdm Article
1.3.6.1.4.1.20044.101.2.3.1.72.1Rowpmcryptoe100AlmlineQsfpAlmDdmEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmlineQsfpAlmDdm table
1.3.6.1.4.1.20044.101.2.3.1.72.1.1Columnpmcryptoe100AlmlineQsfpAlmDdmIndexread-onlycurrentIndex definition for the pmcryptoe100AlmlineQsfpAlmDdm table
1.3.6.1.4.1.20044.101.2.3.1.72.1.2Columnpmcryptoe100AlmLineTxPwLowAlmPortnread-onlycurrentClient Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi…
1.3.6.1.4.1.20044.101.2.3.1.72.1.3Columnpmcryptoe100AlmLineTxPwrHighAlmPortnread-onlycurrentClient Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in…
1.3.6.1.4.1.20044.101.2.3.1.72.1.4Columnpmcryptoe100AlmLineTxBiasLowAlmPortnread-onlycurrentClient Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in…
1.3.6.1.4.1.20044.101.2.3.1.72.1.5Columnpmcryptoe100AlmLineTxBiasHighAlmPortnread-onlycurrentClient Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm …
1.3.6.1.4.1.20044.101.2.3.1.72.1.6Columnpmcryptoe100AlmLineVccLowAlmPortnread-onlycurrentClient Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Alarm …
1.3.6.1.4.1.20044.101.2.3.1.72.1.7Columnpmcryptoe100AlmLineVccHighAlmPortnread-onlycurrentClient Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Alar…
1.3.6.1.4.1.20044.101.2.3.1.72.1.8Columnpmcryptoe100AlmLineTempLowAlmPortnread-onlycurrentClient Trscv Temp Low Alarm :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicatin…
1.3.6.1.4.1.20044.101.2.3.1.72.1.9Columnpmcryptoe100AlmLineTempHighAlmPortnread-onlycurrentClient Trscv Temp High Alarm :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicat…
1.3.6.1.4.1.20044.101.2.3.1.72.1.16Columnpmcryptoe100AlmLineRxPwrLowAlmPortnread-onlycurrentClient Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic…
1.3.6.1.4.1.20044.101.2.3.1.72.1.17Columnpmcryptoe100AlmLineRxPwrHighAlmPortnread-onlycurrentClient Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind…
1.3.6.1.4.1.20044.101.2.3.1.104Tablepmcryptoe100AlmlineQsfpWarnDdmTablenot-accessiblecurrentList of pmcryptoe100AlmlineQsfpWarnDdm Article
1.3.6.1.4.1.20044.101.2.3.1.104.1Rowpmcryptoe100AlmlineQsfpWarnDdmEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmlineQsfpWarnDdm table
1.3.6.1.4.1.20044.101.2.3.1.104.1.1Columnpmcryptoe100AlmlineQsfpWarnDdmIndexread-onlycurrentIndex definition for the pmcryptoe100AlmlineQsfpWarnDdm table
1.3.6.1.4.1.20044.101.2.3.1.104.1.2Columnpmcryptoe100AlmLineTxPwLowWngPortnread-onlycurrentClient Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning …
1.3.6.1.4.1.20044.101.2.3.1.104.1.3Columnpmcryptoe100AlmLineTxPwrHighWngPortnread-onlycurrentClient Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin…
1.3.6.1.4.1.20044.101.2.3.1.104.1.4Columnpmcryptoe100AlmLineTxBiasLowWngPortnread-onlycurrentClient Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin…
1.3.6.1.4.1.20044.101.2.3.1.104.1.5Columnpmcryptoe100AlmLineTxBiasHighWngPortnread-onlycurrentClient Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn…
1.3.6.1.4.1.20044.101.2.3.1.104.1.6Columnpmcryptoe100AlmLineVccLowWngPortnread-onlycurrentClient Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn…
1.3.6.1.4.1.20044.101.2.3.1.104.1.7Columnpmcryptoe100AlmLineVccHighWngPortnread-onlycurrentClient Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa…
1.3.6.1.4.1.20044.101.2.3.1.104.1.8Columnpmcryptoe100AlmLineTempLowWngPortnread-onlycurrentClient Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic…
1.3.6.1.4.1.20044.101.2.3.1.104.1.9Columnpmcryptoe100AlmLineTempHighWngPortnread-onlycurrentClient Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind…
1.3.6.1.4.1.20044.101.2.3.1.104.1.16Columnpmcryptoe100AlmLineRxPwrLowWngPortnread-onlycurrentClient Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i…
1.3.6.1.4.1.20044.101.2.3.1.104.1.17Columnpmcryptoe100AlmLineRxPwrHighWngPortnread-onlycurrentClient Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning…
1.3.6.1.4.1.20044.101.2.3.2Nodepmcryptoe100AlmLineUrg
1.3.6.1.4.1.20044.101.2.3.2.196Tablepmcryptoe100AlmlineHostLaneFaultTablenot-accessiblecurrentList of pmcryptoe100AlmlineHostLaneFault Article
1.3.6.1.4.1.20044.101.2.3.2.196.1Rowpmcryptoe100AlmlineHostLaneFaultEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmlineHostLaneFault table
1.3.6.1.4.1.20044.101.2.3.2.196.1.1Columnpmcryptoe100AlmlineHostLaneFaultIndexread-onlycurrentIndex definition for the pmcryptoe100AlmlineHostLaneFault table
1.3.6.1.4.1.20044.101.2.3.2.196.1.2Columnpmcryptoe100AlmLineInputLossOfSignalPortnread-onlycurrentLine Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T…
1.3.6.1.4.1.20044.101.2.3.2.196.1.3Columnpmcryptoe100AlmLineLossOfFramePortnread-onlycurrentLine Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom…
1.3.6.1.4.1.20044.101.2.3.2.196.1.4Columnpmcryptoe100AlmLineSmBdiInsertedPortnread-onlycurrentLine SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect …
1.3.6.1.4.1.20044.101.2.3.2.196.1.5Columnpmcryptoe100AlmLineSmBdiDetectedPortnread-onlycurrentLine SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I…
1.3.6.1.4.1.20044.101.2.3.2.196.1.6Columnpmcryptoe100AlmLineSmIaeInsertedPortnread-onlycurrentLine SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment…
1.3.6.1.4.1.20044.101.2.3.2.196.1.7Columnpmcryptoe100AlmLineSmIaeDetectedPortnread-onlycurrentLine SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment …
1.3.6.1.4.1.20044.101.2.3.2.196.1.8Columnpmcryptoe100AlmOtu4DdegPortnread-onlycurrentOTU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port <Help> This alarm indicates if a Signal Degrade has been detected upon thres…
1.3.6.1.4.1.20044.101.2.3.2.196.1.9Columnpmcryptoe100AlmClientOtu4DtimPortnread-onlycurrentOTU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port <Help> This alarm indicates if a Trace Identifier Mismatch has be…
1.3.6.1.4.1.20044.101.2.3.2.196.1.10Columnpmcryptoe100AlmLineEncryptionFailurePortnread-onlycurrentEncryption Failure :This OID indicates the encryption mechanism failed, impacting the traffic (the line traffic is down). <Help> This alarm indicates the encry…
1.3.6.1.4.1.20044.101.2.3.2.196.1.12Columnpmcryptoe100AlmLineOchr4DlosPPortnread-onlycurrentOchr4 - DLOS-P :This OID indicates that a Transmitter failure has been detected on line port <Help> This alarm indicates if a Transmitter Failure has been dete…
1.3.6.1.4.1.20044.101.2.3.2.196.1.17Columnpmcryptoe100AlmLineOtu4DlomPortnread-onlycurrentOTU4 DLOM :This OID indicates that a Loss Of Multiframe has been detected on line port <Help> This alarm indicates if a Loss Of Multiframe has been detected on…
1.3.6.1.4.1.20044.101.2.3.2.208Tablepmcryptoe100AlmlineOdu4AlmTablenot-accessiblecurrentList of pmcryptoe100AlmlineOdu4Alm Article
1.3.6.1.4.1.20044.101.2.3.2.208.1Rowpmcryptoe100AlmlineOdu4AlmEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmlineOdu4Alm table
1.3.6.1.4.1.20044.101.2.3.2.208.1.1Columnpmcryptoe100AlmlineOdu4AlmIndexread-onlycurrentIndex definition for the pmcryptoe100AlmlineOdu4Alm table
1.3.6.1.4.1.20044.101.2.3.2.208.1.4Columnpmcryptoe100AlmLineOdu4DplmPortnread-onlycurrentODU4 DPLM :This OID indicates a Payload Mismatch is detected on the line port<Help> Alarm indicating a Payload Mismatch <Condtype> LINE_ODU4_DPLM <Probcause> r…
1.3.6.1.4.1.20044.101.2.3.2.208.1.6Columnpmcryptoe100AlmLineOdu4DdegPortnread-onlycurrentODU4 DDEG :This OID indicates that a Signal Degrade has been detected on line port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation para…
1.3.6.1.4.1.20044.101.2.3.2.208.1.8Columnpmcryptoe100AlmLineOdu4IaisPortnread-onlycurrentODU4 IAIS :This OID indicates that an Alarm Indication Signal has been inserted on line port <Help> This alarm indicates if an Alarm Indication Signal has been…
1.3.6.1.4.1.20044.101.2.3.2.208.1.9Columnpmcryptoe100AlmLineOdu4DtimPortnread-onlycurrentODU4 DTIM :This OID indicates that a Trace Identifier Mismatch has been detected on line port<Help> This alarm indicates if an Trace Identifier Mismatch has be…
1.3.6.1.4.1.20044.101.2.3.2.208.1.10Columnpmcryptoe100AlmLineOdu4DaisPortnread-onlycurrentODU4 DAIS :This OID indicates that a Alarm Indication SIgnal has been detected on line port<Help> This alarm indicates if an Alarm Indication Signal has been d…
1.3.6.1.4.1.20044.101.2.3.2.208.1.12Columnpmcryptoe100AlmLineOdu4IociPortnread-onlycurrentODU4 IOCI :This OID indicates that an Open Connection has been inserted on line port <Help> This alarm indicates if an Open Connection Indication has been inse…
1.3.6.1.4.1.20044.101.2.3.2.208.1.13Columnpmcryptoe100AlmLineOdu4DociPortnread-onlycurrentODU4 DOCI :This OID indicates that a Open Connection has been detected on line port <Help> This alarm indicates if an Open Connection Indication has been detec…
1.3.6.1.4.1.20044.101.2.3.2.208.1.14Columnpmcryptoe100AlmLineOdu4IbdiPortnread-onlycurrentODU4 IBDI :This OID indicates that a Backward Defect Indication has been inserted on line port <Help> This alarm indicates if a Backward Defect Indication has …
1.3.6.1.4.1.20044.101.2.3.2.208.1.15Columnpmcryptoe100AlmLineOdu4DbdiPortnread-onlycurrentODU4 DBDI :This OID indicates that a Backward Defect Indication has been detected on line port<Help> This alarm indicates if a Backward Defect Indication has b…
1.3.6.1.4.1.20044.101.2.3.2.208.1.16Columnpmcryptoe100AlmLineOdu4IlckPortnread-onlycurrentODU4 ILCK :This OID indicates that a Locked Indication has been inserted on line port <Help> This alarm indicates if a Locked Indication has been inserted on t…
1.3.6.1.4.1.20044.101.2.3.2.208.1.17Columnpmcryptoe100AlmLineOdu4DlckPortnread-onlycurrentODU4 DLCK :This OID indicates that a Locked Indication has been detected on line port <Help> This alarm indicates if a Locked Indication has been detected on t…
1.3.6.1.4.1.20044.101.2.3.3Nodepmcryptoe100AlmLineCrit
1.3.6.1.4.1.20044.101.2.3.3.40Tablepmcryptoe100AlmsynthAlmLineTablenot-accessiblecurrentList of pmcryptoe100AlmsynthAlmLine Article
1.3.6.1.4.1.20044.101.2.3.3.40.1Rowpmcryptoe100AlmsynthAlmLineEntrynot-accessiblecurrentRow definition for the pmcryptoe100AlmsynthAlmLine table
1.3.6.1.4.1.20044.101.2.3.3.40.1.1Columnpmcryptoe100AlmsynthAlmLineIndexread-onlycurrentIndex definition for the pmcryptoe100AlmsynthAlmLine table
1.3.6.1.4.1.20044.101.2.3.3.40.1.2Columnpmcryptoe100AlmXfpAbsentPortnread-onlycurrentLine Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg…
1.3.6.1.4.1.20044.101.2.3.3.40.1.3Columnpmcryptoe100AlmXfpInitNotComplPortnread-onlycurrentLine Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr…
1.3.6.1.4.1.20044.101.2.3.3.40.1.5Columnpmcryptoe100AlmLineHwFailPortnread-onlycurrentLine Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr…
1.3.6.1.4.1.20044.101.2.3.3.40.1.6Columnpmcryptoe100AlmXfpTxOffPortnread-onlycurrentLine Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co…
1.3.6.1.4.1.20044.101.2.3.3.40.1.7Columnpmcryptoe100AlmLineLocalOosPortnread-onlycurrentLine Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service…
1.3.6.1.4.1.20044.101.2.3.3.40.1.9Columnpmcryptoe100AlmUpRdiInsPortnread-onlycurrentMS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic…
1.3.6.1.4.1.20044.101.2.3.3.40.1.10Columnpmcryptoe100AlmLineDdmWarningPortnread-onlycurrentWarning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has…
1.3.6.1.4.1.20044.101.2.3.3.40.1.11Columnpmcryptoe100AlmLineDdmAlmPortnread-onlycurrentAlarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been…
1.3.6.1.4.1.20044.101.2.3.3.40.1.13Columnpmcryptoe100AlmLineFailPortnread-onlycurrentLine Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm…
1.3.6.1.4.1.20044.101.3Nodepmcryptoe100measures
1.3.6.1.4.1.20044.101.3.1Nodepmcryptoe100MesrOther
1.3.6.1.4.1.20044.101.3.1.0Scalarpmcryptoe100Mesrsynth0read-onlydeprecatedNot Used :
1.3.6.1.4.1.20044.101.3.1.1Scalarpmcryptoe100Mesrsynth1read-onlydeprecatedNot Used :
1.3.6.1.4.1.20044.101.3.1.7Scalarpmcryptoe100MesrpmIntervalNumberread-onlycurrentPM Interval Counter :
1.3.6.1.4.1.20044.101.3.1.252Scalarpmcryptoe100Mesrtrscv1Tempread-onlycurrentClient Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256)…
1.3.6.1.4.1.20044.101.3.1.254Scalarpmcryptoe100Mesrtrscv1PowerSupplyread-onlycurrentClient Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/1…
1.3.6.1.4.1.20044.101.3.1.400Scalarpmcryptoe100MesrlineTrscvTempread-onlycurrentLine Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (…
1.3.6.1.4.1.20044.101.3.1.408Scalarpmcryptoe100MesrlineTrscvVoltageread-onlycurrentLine Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/100…
1.3.6.1.4.1.20044.101.3.2Nodepmcryptoe100MesrClient
1.3.6.1.4.1.20044.101.3.2.256Tablepmcryptoe100MesrclientTxCompositePwrTablenot-accessiblecurrentList of pmcryptoe100MesrclientTxCompositePwr Article
1.3.6.1.4.1.20044.101.3.2.256.1Rowpmcryptoe100MesrclientTxCompositePwrEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrclientTxCompositePwr table
1.3.6.1.4.1.20044.101.3.2.256.1.1Columnpmcryptoe100MesrclientTxCompositePwrIndexread-onlycurrentIndex definition for the pmcryptoe100MesrclientTxCompositePwr table
1.3.6.1.4.1.20044.101.3.2.256.1.2Columnpmcryptoe100MesrclientTxCompositePwrPortnread-onlycurrentClient Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from…
1.3.6.1.4.1.20044.101.3.2.272Tablepmcryptoe100MesrclientTxPwrMinTablenot-accessiblecurrentList of pmcryptoe100MesrclientTxPwrMin Article
1.3.6.1.4.1.20044.101.3.2.272.1Rowpmcryptoe100MesrclientTxPwrMinEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrclientTxPwrMin table
1.3.6.1.4.1.20044.101.3.2.272.1.1Columnpmcryptoe100MesrclientTxPwrMinIndexread-onlycurrentIndex definition for the pmcryptoe100MesrclientTxPwrMin table
1.3.6.1.4.1.20044.101.3.2.272.1.2Columnpmcryptoe100MesrclientTxPwrMinPortnread-onlycurrentMin Client Trscv Tx Power Per Lane :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit…
1.3.6.1.4.1.20044.101.3.2.288Tablepmcryptoe100MesrclientRxCompositePwrTablenot-accessiblecurrentList of pmcryptoe100MesrclientRxCompositePwr Article
1.3.6.1.4.1.20044.101.3.2.288.1Rowpmcryptoe100MesrclientRxCompositePwrEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrclientRxCompositePwr table
1.3.6.1.4.1.20044.101.3.2.288.1.1Columnpmcryptoe100MesrclientRxCompositePwrIndexread-onlycurrentIndex definition for the pmcryptoe100MesrclientRxCompositePwr table
1.3.6.1.4.1.20044.101.3.2.288.1.2Columnpmcryptoe100MesrclientRxCompositePwrPortnread-onlycurrentClient Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from t…
1.3.6.1.4.1.20044.101.3.2.304Tablepmcryptoe100MesrclientRxPwrMinTablenot-accessiblecurrentList of pmcryptoe100MesrclientRxPwrMin Article
1.3.6.1.4.1.20044.101.3.2.304.1Rowpmcryptoe100MesrclientRxPwrMinEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrclientRxPwrMin table
1.3.6.1.4.1.20044.101.3.2.304.1.1Columnpmcryptoe100MesrclientRxPwrMinIndexread-onlycurrentIndex definition for the pmcryptoe100MesrclientRxPwrMin table
1.3.6.1.4.1.20044.101.3.2.304.1.2Columnpmcryptoe100MesrclientRxPwrMinPortnread-onlycurrentMin Client Trscv Rx Power Per Lane :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read from the DDM (Digita…
1.3.6.1.4.1.20044.101.3.2.336Tablepmcryptoe100MesrclientTxPwrMaxTablenot-accessiblecurrentList of pmcryptoe100MesrclientTxPwrMax Article
1.3.6.1.4.1.20044.101.3.2.336.1Rowpmcryptoe100MesrclientTxPwrMaxEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrclientTxPwrMax table
1.3.6.1.4.1.20044.101.3.2.336.1.1Columnpmcryptoe100MesrclientTxPwrMaxIndexread-onlycurrentIndex definition for the pmcryptoe100MesrclientTxPwrMax table
1.3.6.1.4.1.20044.101.3.2.336.1.2Columnpmcryptoe100MesrclientTxPwrMaxPortnread-onlycurrentMax Client Trscv Tx Power Per Lane :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit…
1.3.6.1.4.1.20044.101.3.2.368Tablepmcryptoe100MesrclientRxPwrMaxTablenot-accessiblecurrentList of pmcryptoe100MesrclientRxPwrMax Article
1.3.6.1.4.1.20044.101.3.2.368.1Rowpmcryptoe100MesrclientRxPwrMaxEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrclientRxPwrMax table
1.3.6.1.4.1.20044.101.3.2.368.1.1Columnpmcryptoe100MesrclientRxPwrMaxIndexread-onlycurrentIndex definition for the pmcryptoe100MesrclientRxPwrMax table
1.3.6.1.4.1.20044.101.3.2.368.1.2Columnpmcryptoe100MesrclientRxPwrMaxPortnread-onlycurrentMax Client Trscv Rx Power Per Lane :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital …
1.3.6.1.4.1.20044.101.3.3Nodepmcryptoe100MesrLine
1.3.6.1.4.1.20044.101.3.3.144Tablepmcryptoe100MesrlineTxPwrMinTablenot-accessiblecurrentList of pmcryptoe100MesrlineTxPwrMin Article
1.3.6.1.4.1.20044.101.3.3.144.1Rowpmcryptoe100MesrlineTxPwrMinEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrlineTxPwrMin table
1.3.6.1.4.1.20044.101.3.3.144.1.1Columnpmcryptoe100MesrlineTxPwrMinIndexread-onlycurrentIndex definition for the pmcryptoe100MesrlineTxPwrMin table
1.3.6.1.4.1.20044.101.3.3.144.1.2Columnpmcryptoe100MesrlineTxPwrMinPortnread-onlycurrentMin Line Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic…
1.3.6.1.4.1.20044.101.3.3.160Tablepmcryptoe100MesrlineTxCompositePwrTablenot-accessiblecurrentList of pmcryptoe100MesrlineTxCompositePwr Article
1.3.6.1.4.1.20044.101.3.3.160.1Rowpmcryptoe100MesrlineTxCompositePwrEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrlineTxCompositePwr table
1.3.6.1.4.1.20044.101.3.3.160.1.1Columnpmcryptoe100MesrlineTxCompositePwrIndexread-onlycurrentIndex definition for the pmcryptoe100MesrlineTxCompositePwr table
1.3.6.1.4.1.20044.101.3.3.160.1.2Columnpmcryptoe100MesrlineTxCompositePwrPortnread-onlycurrentLine Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Line Transceiver, read from the…
1.3.6.1.4.1.20044.101.3.3.176Tablepmcryptoe100MesrlineRxPwrMinTablenot-accessiblecurrentList of pmcryptoe100MesrlineRxPwrMin Article
1.3.6.1.4.1.20044.101.3.3.176.1Rowpmcryptoe100MesrlineRxPwrMinEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrlineRxPwrMin table
1.3.6.1.4.1.20044.101.3.3.176.1.1Columnpmcryptoe100MesrlineRxPwrMinIndexread-onlycurrentIndex definition for the pmcryptoe100MesrlineRxPwrMin table
1.3.6.1.4.1.20044.101.3.3.176.1.2Columnpmcryptoe100MesrlineRxPwrMinPortnread-onlycurrentMin Line Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic …
1.3.6.1.4.1.20044.101.3.3.192Tablepmcryptoe100MesrlineRxCompositePwrTablenot-accessiblecurrentList of pmcryptoe100MesrlineRxCompositePwr Article
1.3.6.1.4.1.20044.101.3.3.192.1Rowpmcryptoe100MesrlineRxCompositePwrEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrlineRxCompositePwr table
1.3.6.1.4.1.20044.101.3.3.192.1.1Columnpmcryptoe100MesrlineRxCompositePwrIndexread-onlycurrentIndex definition for the pmcryptoe100MesrlineRxCompositePwr table
1.3.6.1.4.1.20044.101.3.3.192.1.2Columnpmcryptoe100MesrlineRxCompositePwrPortnread-onlycurrentLine Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Line Transceiver, read from the D…
1.3.6.1.4.1.20044.101.3.3.208Tablepmcryptoe100MesrlineTxPwrMaxTablenot-accessiblecurrentList of pmcryptoe100MesrlineTxPwrMax Article
1.3.6.1.4.1.20044.101.3.3.208.1Rowpmcryptoe100MesrlineTxPwrMaxEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrlineTxPwrMax table
1.3.6.1.4.1.20044.101.3.3.208.1.1Columnpmcryptoe100MesrlineTxPwrMaxIndexread-onlycurrentIndex definition for the pmcryptoe100MesrlineTxPwrMax table
1.3.6.1.4.1.20044.101.3.3.208.1.2Columnpmcryptoe100MesrlineTxPwrMaxPortnread-onlycurrentMax Line Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic…
1.3.6.1.4.1.20044.101.3.3.240Tablepmcryptoe100MesrlineRxPwrMaxTablenot-accessiblecurrentList of pmcryptoe100MesrlineRxPwrMax Article
1.3.6.1.4.1.20044.101.3.3.240.1Rowpmcryptoe100MesrlineRxPwrMaxEntrynot-accessiblecurrentRow definition for the pmcryptoe100MesrlineRxPwrMax table
1.3.6.1.4.1.20044.101.3.3.240.1.1Columnpmcryptoe100MesrlineRxPwrMaxIndexread-onlycurrentIndex definition for the pmcryptoe100MesrlineRxPwrMax table
1.3.6.1.4.1.20044.101.3.3.240.1.2Columnpmcryptoe100MesrlineRxPwrMaxPortnread-onlycurrentMax Line Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo…
1.3.6.1.4.1.20044.101.4Nodepmcryptoe100counters
1.3.6.1.4.1.20044.101.4.1Nodepmcryptoe100CntOther
1.3.6.1.4.1.20044.101.4.2Nodepmcryptoe100CntClient
1.3.6.1.4.1.20044.101.4.2.112Tablepmcryptoe100CntclientInputErrorCounterTablenot-accessiblecurrentList of pmcryptoe100CntclientInputErrorCounter Article
1.3.6.1.4.1.20044.101.4.2.112.1Rowpmcryptoe100CntclientInputErrorCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntclientInputErrorCounter table
1.3.6.1.4.1.20044.101.4.2.112.1.1Columnpmcryptoe100CntclientInputErrorCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntclientInputErrorCounter table
1.3.6.1.4.1.20044.101.4.2.112.1.2Columnpmcryptoe100CntclientInputErrorCounterValuePortnread-onlycurrentClient Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the …
1.3.6.1.4.1.20044.101.4.2.112.1.3Columnpmcryptoe100CntclientInputErrorCounterErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the client error counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.2.112.1.4Columnpmcryptoe100CntclientInputErrorCounterOverloadPortnread-onlycurrentClient Counter Overload :This OID when set indicates a client input error counter overload on Port
1.3.6.1.4.1.20044.101.4.2.144Tablepmcryptoe100CntclientCbipCounterTablenot-accessiblecurrentList of pmcryptoe100CntclientCbipCounter Article
1.3.6.1.4.1.20044.101.4.2.144.1Rowpmcryptoe100CntclientCbipCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntclientCbipCounter table
1.3.6.1.4.1.20044.101.4.2.144.1.1Columnpmcryptoe100CntclientCbipCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntclientCbipCounter table
1.3.6.1.4.1.20044.101.4.2.144.1.2Columnpmcryptoe100CntclientCbipCounterValuePortnread-onlycurrentClient Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of…
1.3.6.1.4.1.20044.101.4.2.144.1.3Columnpmcryptoe100CntclientCbipCounterErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.2.144.1.4Columnpmcryptoe100CntclientCbipCounterOverloadPortnread-onlycurrentClient CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port
1.3.6.1.4.1.20044.101.4.3Nodepmcryptoe100CntLine
1.3.6.1.4.1.20044.101.4.3.192Tablepmcryptoe100CntlocalLineSmBip8ErrorCounterTablenot-accessiblecurrentList of pmcryptoe100CntlocalLineSmBip8ErrorCounter Article
1.3.6.1.4.1.20044.101.4.3.192.1Rowpmcryptoe100CntlocalLineSmBip8ErrorCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlocalLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.101.4.3.192.1.1Columnpmcryptoe100CntlocalLineSmBip8ErrorCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntlocalLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.101.4.3.192.1.2Columnpmcryptoe100CntlocalLineSmBip8ErrorCounterValuePortnread-onlycurrentLine Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate af…
1.3.6.1.4.1.20044.101.4.3.192.1.3Columnpmcryptoe100CntlocalLineSmBip8ErrorCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the B1 error counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.3.192.1.4Columnpmcryptoe100CntlocalLineSmBip8ErrorCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a B1 error counter overload on Port
1.3.6.1.4.1.20044.101.4.3.193Tablepmcryptoe100CntlocalLineFecCorrectedErrorsCounterTablenot-accessiblecurrentList of pmcryptoe100CntlocalLineFecCorrectedErrorsCounter Article
1.3.6.1.4.1.20044.101.4.3.193.1Rowpmcryptoe100CntlocalLineFecCorrectedErrorsCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlocalLineFecCorrectedErrorsCounter table
1.3.6.1.4.1.20044.101.4.3.193.1.1Columnpmcryptoe100CntlocalLineFecCorrectedErrorsCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntlocalLineFecCorrectedErrorsCounter table
1.3.6.1.4.1.20044.101.4.3.193.1.2Columnpmcryptoe100CntlocalLineFecCorrectedErrorsCounterValuePortnread-onlycurrentLine Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate…
1.3.6.1.4.1.20044.101.4.3.193.1.3Columnpmcryptoe100CntlocalLineFecCorrectedErrorsCounterErrorPortnread-onlycurrentFEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line
1.3.6.1.4.1.20044.101.4.3.193.1.4Columnpmcryptoe100CntlocalLineFecCorrectedErrorsCounterOverloadPortnread-onlycurrentFEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line
1.3.6.1.4.1.20044.101.4.3.194Tablepmcryptoe100CntremoteLineSmBip8ErrorCounterTablenot-accessiblecurrentList of pmcryptoe100CntremoteLineSmBip8ErrorCounter Article
1.3.6.1.4.1.20044.101.4.3.194.1Rowpmcryptoe100CntremoteLineSmBip8ErrorCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntremoteLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.101.4.3.194.1.1Columnpmcryptoe100CntremoteLineSmBip8ErrorCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntremoteLineSmBip8ErrorCounter table
1.3.6.1.4.1.20044.101.4.3.194.1.2Columnpmcryptoe100CntremoteLineSmBip8ErrorCounterValuePortnread-onlycurrentRemote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error…
1.3.6.1.4.1.20044.101.4.3.194.1.3Columnpmcryptoe100CntremoteLineSmBip8ErrorCounterErrorPortnread-onlycurrentRemote Counter Error :
1.3.6.1.4.1.20044.101.4.3.194.1.4Columnpmcryptoe100CntremoteLineSmBip8ErrorCounterOverloadPortnread-onlycurrentRemote Counter Overload :
1.3.6.1.4.1.20044.101.4.3.195Tablepmcryptoe100CntlineDfrmTimCntTablenot-accessiblecurrentList of pmcryptoe100CntlineDfrmTimCnt Article
1.3.6.1.4.1.20044.101.4.3.195.1Rowpmcryptoe100CntlineDfrmTimCntEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlineDfrmTimCnt table
1.3.6.1.4.1.20044.101.4.3.195.1.1Columnpmcryptoe100CntlineDfrmTimCntIndexread-onlycurrentIndex definition for the pmcryptoe100CntlineDfrmTimCnt table
1.3.6.1.4.1.20044.101.4.3.195.1.2Columnpmcryptoe100CntlineDfrmTimCntValuePortnread-onlycurrentLine Timer Counter :
1.3.6.1.4.1.20044.101.4.3.195.1.3Columnpmcryptoe100CntlineDfrmTimCntErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.3.195.1.4Columnpmcryptoe100CntlineDfrmTimCntOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.101.4.3.196Tablepmcryptoe100CntlocalLineTrscvPreSdFecErrorCounterTablenot-accessiblecurrentList of pmcryptoe100CntlocalLineTrscvPreSdFecErrorCounter Article
1.3.6.1.4.1.20044.101.4.3.196.1Rowpmcryptoe100CntlocalLineTrscvPreSdFecErrorCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlocalLineTrscvPreSdFecErrorCounter table
1.3.6.1.4.1.20044.101.4.3.196.1.1Columnpmcryptoe100CntlocalLineTrscvPreSdFecErrorCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntlocalLineTrscvPreSdFecErrorCounter table
1.3.6.1.4.1.20044.101.4.3.196.1.2Columnpmcryptoe100CntlocalLineTrscvPreSdFecErrorCounterValuePortnread-onlycurrentPre-SD FEC Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft …
1.3.6.1.4.1.20044.101.4.3.196.1.3Columnpmcryptoe100CntlocalLineTrscvPreSdFecErrorCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.3.196.1.4Columnpmcryptoe100CntlocalLineTrscvPreSdFecErrorCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.101.4.3.197Tablepmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounterTablenot-accessiblecurrentList of pmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounter Article
1.3.6.1.4.1.20044.101.4.3.197.1Rowpmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounter table
1.3.6.1.4.1.20044.101.4.3.197.1.1Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounter table
1.3.6.1.4.1.20044.101.4.3.197.1.2Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortnread-onlycurrentUncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat…
1.3.6.1.4.1.20044.101.4.3.197.1.3Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.3.197.1.4Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.101.4.3.198Tablepmcryptoe100CntlocalLineTrscvPreSdFecBitCounterTablenot-accessiblecurrentList of pmcryptoe100CntlocalLineTrscvPreSdFecBitCounter Article
1.3.6.1.4.1.20044.101.4.3.198.1Rowpmcryptoe100CntlocalLineTrscvPreSdFecBitCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlocalLineTrscvPreSdFecBitCounter table
1.3.6.1.4.1.20044.101.4.3.198.1.1Columnpmcryptoe100CntlocalLineTrscvPreSdFecBitCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntlocalLineTrscvPreSdFecBitCounter table
1.3.6.1.4.1.20044.101.4.3.198.1.2Columnpmcryptoe100CntlocalLineTrscvPreSdFecBitCounterValuePortnread-onlycurrentPre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis…
1.3.6.1.4.1.20044.101.4.3.198.1.3Columnpmcryptoe100CntlocalLineTrscvPreSdFecBitCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.3.198.1.4Columnpmcryptoe100CntlocalLineTrscvPreSdFecBitCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.101.4.3.199Tablepmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounterTablenot-accessiblecurrentList of pmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounter Article
1.3.6.1.4.1.20044.101.4.3.199.1Rowpmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounterEntrynot-accessiblecurrentRow definition for the pmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounter table
1.3.6.1.4.1.20044.101.4.3.199.1.1Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounterIndexread-onlycurrentIndex definition for the pmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounter table
1.3.6.1.4.1.20044.101.4.3.199.1.2Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounterValuePortnread-onlycurrentUncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft…
1.3.6.1.4.1.20044.101.4.3.199.1.3Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.101.4.3.199.1.4Columnpmcryptoe100CntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.101.6Nodepmcryptoe100controlsWrite
1.3.6.1.4.1.20044.101.6.1Nodepmcryptoe100CtrlOther
1.3.6.1.4.1.20044.101.6.1.1Nodepmcryptoe100CtrlconfMgnt1
1.3.6.1.4.1.20044.101.6.1.1.1Scalarpmcryptoe100CtrlConf1Load1read-writecurrentLoad Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM.
1.3.6.1.4.1.20044.101.6.1.1.2Scalarpmcryptoe100CtrlConf2Load1read-writecurrentLoad Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM.
1.3.6.1.4.1.20044.101.6.1.1.10Scalarpmcryptoe100CtrlConf2Flash1read-writecurrentWrite Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura…
1.3.6.1.4.1.20044.101.6.1.1.14Scalarpmcryptoe100CtrlConf2Clear1read-writecurrentClear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o…
1.3.6.1.4.1.20044.101.6.1.4Nodepmcryptoe100Ctrlsynth4
1.3.6.1.4.1.20044.101.6.1.4.1Scalarpmcryptoe100CtrlCorrelatOnread-writecurrentEnable Alarm Correlation :This OID enables the alarm correlation in the PM.
1.3.6.1.4.1.20044.101.6.1.4.2Scalarpmcryptoe100CtrlCorrelatOffread-writecurrentDisable Alarm Correlation :This OID disables the alarm correlation in the PM.
1.3.6.1.4.1.20044.101.6.1.5Nodepmcryptoe100CtrlswMgnt
1.3.6.1.4.1.20044.101.6.1.5.2Scalarpmcryptoe100CtrlColdResetread-writecurrentPM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> …
1.3.6.1.4.1.20044.101.6.1.5.3Scalarpmcryptoe100CtrlWarmResetread-writecurrentPM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th…
1.3.6.1.4.1.20044.101.6.1.5.5Scalarpmcryptoe100CtrlLoadSwBank1read-writecurrentSet Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW…
1.3.6.1.4.1.20044.101.6.1.5.6Scalarpmcryptoe100CtrlLoadSwBank2read-writecurrentSet Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S…
1.3.6.1.4.1.20044.101.6.1.6Nodepmcryptoe100CtrlgwMgnt
1.3.6.1.4.1.20044.101.6.1.6.1Scalarpmcryptoe100CtrlCurrentGwResetread-writecurrentActive Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting.
1.3.6.1.4.1.20044.101.6.1.6.5Scalarpmcryptoe100CtrlLoadGwBank1read-writecurrentSet Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.101.6.1.6.6Scalarpmcryptoe100CtrlLoadGwBank2read-writecurrentSet Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.101.6.1.6.7Scalarpmcryptoe100CtrlLoadGwBank3read-writecurrentSet Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.101.6.1.6.8Scalarpmcryptoe100CtrlLoadGwBank4read-writecurrentSet Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.101.6.1.192Nodepmcryptoe100CtrlledTest
1.3.6.1.4.1.20044.101.6.1.192.1Scalarpmcryptoe100CtrlGreenLedread-writecurrentGreen Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green
1.3.6.1.4.1.20044.101.6.1.192.2Scalarpmcryptoe100CtrlRedLedread-writecurrentRed Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red
1.3.6.1.4.1.20044.101.6.1.192.3Scalarpmcryptoe100CtrlLedOffread-writecurrentLeds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF
1.3.6.1.4.1.20044.101.6.1.201Nodepmcryptoe100CtrlinitSwitchMarvell
1.3.6.1.4.1.20044.101.6.1.201.1Scalarpmcryptoe100CtrlInitSwitchMarvellread-writecurrentSwitch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit…
1.3.6.1.4.1.20044.101.6.1.259Nodepmcryptoe100CtrlresetCount
1.3.6.1.4.1.20044.101.6.1.259.1Scalarpmcryptoe100CtrlResetcountread-writecurrentModule Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module
1.3.6.1.4.1.20044.101.6.1.260Nodepmcryptoe100CtrlresetRmon
1.3.6.1.4.1.20044.101.6.1.260.1Scalarpmcryptoe100CtrlResetrmonread-writecurrentModule Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module
1.3.6.1.4.1.20044.101.6.1.261Nodepmcryptoe100CtrlresetMeasurements
1.3.6.1.4.1.20044.101.6.1.261.1Scalarpmcryptoe100CtrlResetmeasurementsread-writecurrentManagement Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management
1.3.6.1.4.1.20044.101.6.2Nodepmcryptoe100CtrlClient
1.3.6.1.4.1.20044.101.6.2.16Tablepmcryptoe100CtrlaccessLoopTablenot-accessiblecurrentList of pmcryptoe100CtrlaccessLoop Article
1.3.6.1.4.1.20044.101.6.2.16.1Rowpmcryptoe100CtrlaccessLoopEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlaccessLoop table
1.3.6.1.4.1.20044.101.6.2.16.1.1Columnpmcryptoe100CtrlaccessLoopIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlaccessLoop table
1.3.6.1.4.1.20044.101.6.2.16.1.2Columnpmcryptoe100CtrlaccessLoopPortnread-writecurrentClient Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help…
1.3.6.1.4.1.20044.101.6.2.17Tablepmcryptoe100CtrlclientLoopToLineTablenot-accessiblecurrentList of pmcryptoe100CtrlclientLoopToLine Article
1.3.6.1.4.1.20044.101.6.2.17.1Rowpmcryptoe100CtrlclientLoopToLineEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlclientLoopToLine table
1.3.6.1.4.1.20044.101.6.2.17.1.1Columnpmcryptoe100CtrlclientLoopToLineIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlclientLoopToLine table
1.3.6.1.4.1.20044.101.6.2.17.1.2Columnpmcryptoe100CtrlclientLoopToLinePortnread-writecurrentClient Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena…
1.3.6.1.4.1.20044.101.6.2.21Tablepmcryptoe100CtrlcsfUpInsTablenot-accessiblecurrentList of pmcryptoe100CtrlcsfUpIns Article
1.3.6.1.4.1.20044.101.6.2.21.1Rowpmcryptoe100CtrlcsfUpInsEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlcsfUpIns table
1.3.6.1.4.1.20044.101.6.2.21.1.1Columnpmcryptoe100CtrlcsfUpInsIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlcsfUpIns table
1.3.6.1.4.1.20044.101.6.2.21.1.2Columnpmcryptoe100CtrlcsfUpInsPortnread-writecurrentClient Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo…
1.3.6.1.4.1.20044.101.6.2.22Tablepmcryptoe100CtrlcaisDwInsTablenot-accessiblecurrentList of pmcryptoe100CtrlcaisDwIns Article
1.3.6.1.4.1.20044.101.6.2.22.1Rowpmcryptoe100CtrlcaisDwInsEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlcaisDwIns table
1.3.6.1.4.1.20044.101.6.2.22.1.1Columnpmcryptoe100CtrlcaisDwInsIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlcaisDwIns table
1.3.6.1.4.1.20044.101.6.2.22.1.2Columnpmcryptoe100CtrlcaisDwInsPortnread-writecurrentClient AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port
1.3.6.1.4.1.20044.101.6.2.262Tablepmcryptoe100CtrlclientResetAllCountTablenot-accessiblecurrentList of pmcryptoe100CtrlclientResetAllCount Article
1.3.6.1.4.1.20044.101.6.2.262.1Rowpmcryptoe100CtrlclientResetAllCountEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlclientResetAllCount table
1.3.6.1.4.1.20044.101.6.2.262.1.1Columnpmcryptoe100CtrlclientResetAllCountIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlclientResetAllCount table
1.3.6.1.4.1.20044.101.6.2.262.1.2Columnpmcryptoe100CtrlclientResetAllCountsPortnread-writecurrentClient Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl…
1.3.6.1.4.1.20044.101.6.3Nodepmcryptoe100CtrlLine
1.3.6.1.4.1.20044.101.6.3.64Tablepmcryptoe100CtrlcommAccessLoopTablenot-accessiblecurrentList of pmcryptoe100CtrlcommAccessLoop Article
1.3.6.1.4.1.20044.101.6.3.64.1Rowpmcryptoe100CtrlcommAccessLoopEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlcommAccessLoop table
1.3.6.1.4.1.20044.101.6.3.64.1.1Columnpmcryptoe100CtrlcommAccessLoopIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlcommAccessLoop table
1.3.6.1.4.1.20044.101.6.3.64.1.2Columnpmcryptoe100CtrlcommAccessLoopPortnread-writecurrentLine Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co…
1.3.6.1.4.1.20044.101.6.3.66Tablepmcryptoe100CtrllineLoopTablenot-accessiblecurrentList of pmcryptoe100CtrllineLoop Article
1.3.6.1.4.1.20044.101.6.3.66.1Rowpmcryptoe100CtrllineLoopEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrllineLoop table
1.3.6.1.4.1.20044.101.6.3.66.1.1Columnpmcryptoe100CtrllineLoopIndexread-onlycurrentIndex definition for the pmcryptoe100CtrllineLoop table
1.3.6.1.4.1.20044.101.6.3.66.1.2Columnpmcryptoe100CtrllineLoopPortnread-writecurrentLine Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. …
1.3.6.1.4.1.20044.101.6.3.69Tablepmcryptoe100CtrlfecDisableTablenot-accessiblecurrentList of pmcryptoe100CtrlfecDisable Article
1.3.6.1.4.1.20044.101.6.3.69.1Rowpmcryptoe100CtrlfecDisableEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlfecDisable table
1.3.6.1.4.1.20044.101.6.3.69.1.1Columnpmcryptoe100CtrlfecDisableIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlfecDisable table
1.3.6.1.4.1.20044.101.6.3.69.1.2Columnpmcryptoe100CtrlfecDisablePortnread-writecurrentForward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t…
1.3.6.1.4.1.20044.101.6.3.209Tablepmcryptoe100CtrlmsaLineLoopTablenot-accessiblecurrentList of pmcryptoe100CtrlmsaLineLoop Article
1.3.6.1.4.1.20044.101.6.3.209.1Rowpmcryptoe100CtrlmsaLineLoopEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlmsaLineLoop table
1.3.6.1.4.1.20044.101.6.3.209.1.1Columnpmcryptoe100CtrlmsaLineLoopIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlmsaLineLoop table
1.3.6.1.4.1.20044.101.6.3.209.1.2Columnpmcryptoe100CtrlmsaLineLoopPortnread-writecurrentMSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver
1.3.6.1.4.1.20044.101.6.3.210Tablepmcryptoe100CtrlmsaTxResetTablenot-accessiblecurrentList of pmcryptoe100CtrlmsaTxReset Article
1.3.6.1.4.1.20044.101.6.3.210.1Rowpmcryptoe100CtrlmsaTxResetEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlmsaTxReset table
1.3.6.1.4.1.20044.101.6.3.210.1.1Columnpmcryptoe100CtrlmsaTxResetIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlmsaTxReset table
1.3.6.1.4.1.20044.101.6.3.210.1.2Columnpmcryptoe100CtrlmsaTxResetPortnread-writecurrentLine MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side
1.3.6.1.4.1.20044.101.6.3.211Tablepmcryptoe100CtrlmsaRxResetTablenot-accessiblecurrentList of pmcryptoe100CtrlmsaRxReset Article
1.3.6.1.4.1.20044.101.6.3.211.1Rowpmcryptoe100CtrlmsaRxResetEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlmsaRxReset table
1.3.6.1.4.1.20044.101.6.3.211.1.1Columnpmcryptoe100CtrlmsaRxResetIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlmsaRxReset table
1.3.6.1.4.1.20044.101.6.3.211.1.2Columnpmcryptoe100CtrlmsaRxResetPortnread-writecurrentLine MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side
1.3.6.1.4.1.20044.101.6.3.212Tablepmcryptoe100CtrlmsaShutdownTablenot-accessiblecurrentList of pmcryptoe100CtrlmsaShutdown Article
1.3.6.1.4.1.20044.101.6.3.212.1Rowpmcryptoe100CtrlmsaShutdownEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrlmsaShutdown table
1.3.6.1.4.1.20044.101.6.3.212.1.1Columnpmcryptoe100CtrlmsaShutdownIndexread-onlycurrentIndex definition for the pmcryptoe100CtrlmsaShutdown table
1.3.6.1.4.1.20044.101.6.3.212.1.2Columnpmcryptoe100CtrlmsaShutdownPortnread-writecurrentLine MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module
1.3.6.1.4.1.20044.101.6.3.221Tablepmcryptoe100CtrlforceKeyExchangeTablenot-accessibledeprecatedList of pmcryptoe100CtrlforceKeyExchange Article
1.3.6.1.4.1.20044.101.6.3.221.1Rowpmcryptoe100CtrlforceKeyExchangeEntrynot-accessibledeprecatedRow definition for the pmcryptoe100CtrlforceKeyExchange table
1.3.6.1.4.1.20044.101.6.3.221.1.1Columnpmcryptoe100CtrlforceKeyExchangeIndexread-onlydeprecatedIndex definition for the pmcryptoe100CtrlforceKeyExchange table
1.3.6.1.4.1.20044.101.6.3.221.1.2Columnpmcryptoe100CtrlforceKeyExchangePortnread-writedeprecated:
1.3.6.1.4.1.20044.101.6.3.222Tablepmcryptoe100CtrldisableEncryptionTablenot-accessibledeprecatedList of pmcryptoe100CtrldisableEncryption Article
1.3.6.1.4.1.20044.101.6.3.222.1Rowpmcryptoe100CtrldisableEncryptionEntrynot-accessibledeprecatedRow definition for the pmcryptoe100CtrldisableEncryption table
1.3.6.1.4.1.20044.101.6.3.222.1.1Columnpmcryptoe100CtrldisableEncryptionIndexread-onlydeprecatedIndex definition for the pmcryptoe100CtrldisableEncryption table
1.3.6.1.4.1.20044.101.6.3.222.1.2Columnpmcryptoe100CtrldisableEncryptionPortnread-writedeprecated:
1.3.6.1.4.1.20044.101.6.3.223Tablepmcryptoe100CtrlresetMonitoringTablenot-accessibledeprecatedList of pmcryptoe100CtrlresetMonitoring Article
1.3.6.1.4.1.20044.101.6.3.223.1Rowpmcryptoe100CtrlresetMonitoringEntrynot-accessibledeprecatedRow definition for the pmcryptoe100CtrlresetMonitoring table
1.3.6.1.4.1.20044.101.6.3.223.1.1Columnpmcryptoe100CtrlresetMonitoringIndexread-onlydeprecatedIndex definition for the pmcryptoe100CtrlresetMonitoring table
1.3.6.1.4.1.20044.101.6.3.223.1.2Columnpmcryptoe100CtrlresetMonitoringPortnread-writedeprecated:
1.3.6.1.4.1.20044.101.6.3.263Tablepmcryptoe100CtrllineResetAllCountTablenot-accessiblecurrentList of pmcryptoe100CtrllineResetAllCount Article
1.3.6.1.4.1.20044.101.6.3.263.1Rowpmcryptoe100CtrllineResetAllCountEntrynot-accessiblecurrentRow definition for the pmcryptoe100CtrllineResetAllCount table
1.3.6.1.4.1.20044.101.6.3.263.1.1Columnpmcryptoe100CtrllineResetAllCountIndexread-onlycurrentIndex definition for the pmcryptoe100CtrllineResetAllCount table
1.3.6.1.4.1.20044.101.6.3.263.1.2Columnpmcryptoe100CtrllineResetAllCountsPortnread-writecurrentLine Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p…
1.3.6.1.4.1.20044.101.7Nodepmcryptoe100ri
1.3.6.1.4.1.20044.101.7.1Nodepmcryptoe100riTable
1.3.6.1.4.1.20044.101.7.1.1Tablepmcryptoe100RinvSfpTablenot-accessiblecurrentList of the SFPs on the selected module
1.3.6.1.4.1.20044.101.7.1.1.1Rowpmcryptoe100RinvSfpEntrynot-accessiblecurrentRow definition for the SFP table
1.3.6.1.4.1.20044.101.7.1.1.1.1Columnpmcryptoe100RinvSfpIndexread-onlycurrentIndex for SFP table
1.3.6.1.4.1.20044.101.7.1.1.1.2Columnpmcryptoe100Rinvsfpread-onlycurrentInventory for the SFP: This OID contains the inventory for the SFP
1.3.6.1.4.1.20044.101.7.1.2Tablepmcryptoe100RinvLineTablenot-accessiblecurrentList of the XFPs on the selected module
1.3.6.1.4.1.20044.101.7.1.2.1Rowpmcryptoe100RinvLineEntrynot-accessiblecurrentRow definition for the XFP table
1.3.6.1.4.1.20044.101.7.1.2.1.1Columnpmcryptoe100RinvLineIndexread-onlycurrentIndex for XFP table
1.3.6.1.4.1.20044.101.7.1.2.1.2Columnpmcryptoe100RinvxfpLineread-onlycurrentInventory for the XFP: This OID contains the inventory for the XFP
1.3.6.1.4.1.20044.101.7.2Scalarpmcryptoe100RinvReloadInventoryread-writecurrentReload the inventory: This OID triggers an inventory reload.
1.3.6.1.4.1.20044.101.7.3Scalarpmcryptoe100RinvHwPlatformread-onlycurrentHW platform description: This OID contains the description of the Hardware platform.
1.3.6.1.4.1.20044.101.7.4Scalarpmcryptoe100RinvModulePlatformread-onlycurrentModule platform description: This OID contains the description of the Module.
1.3.6.1.4.1.20044.101.7.5Scalarpmcryptoe100RinvSwPlatformread-onlycurrentSW platform description: This OID contains the description of the Software platform.
1.3.6.1.4.1.20044.101.7.6Scalarpmcryptoe100RinvGwPlatformread-onlycurrentGW platform description: This OID contains the description of the Gateware platform.
1.3.6.1.4.1.20044.101.8Nodepmcryptoe100download
1.3.6.1.4.1.20044.101.8.1Nodepmcryptoe100DwlOther
1.3.6.1.4.1.20044.101.8.1.0Nodepmcryptoe100DwlrestartProcess
1.3.6.1.4.1.20044.101.8.1.0.1Scalarpmcryptoe100DwlWarmRestartProcessedread-onlycurrentWarm Restart :This OID indicates that the module last restart was a Warm RESTART
1.3.6.1.4.1.20044.101.8.1.0.2Scalarpmcryptoe100DwlColdRestartProcessedread-onlycurrentCold Restart :This OID indicates that the module last restart was a Cold RESTART
1.3.6.1.4.1.20044.101.8.1.1Nodepmcryptoe100DwlswBanksUsed
1.3.6.1.4.1.20044.101.8.1.1.1Scalarpmcryptoe100DwlSwBank1Usedread-onlycurrentSW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby
1.3.6.1.4.1.20044.101.8.1.1.2Scalarpmcryptoe100DwlSwBank2Usedread-onlycurrentSW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby
1.3.6.1.4.1.20044.101.8.1.1.5Scalarpmcryptoe100DwlSwBank1Notemptyread-onlycurrentSW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package
1.3.6.1.4.1.20044.101.8.1.1.6Scalarpmcryptoe100DwlSwBank2Notemptyread-onlycurrentSW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package
1.3.6.1.4.1.20044.101.8.1.2Nodepmcryptoe100DwlgwBanksUsed
1.3.6.1.4.1.20044.101.8.1.2.1Scalarpmcryptoe100DwlGwBank1Usedread-onlycurrentGW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby
1.3.6.1.4.1.20044.101.8.1.2.2Scalarpmcryptoe100DwlGwBank2Usedread-onlycurrentGW bank 2 active :This OID indicates the module is working on GW bank 2
1.3.6.1.4.1.20044.101.8.1.2.3Scalarpmcryptoe100DwlGwBank3Usedread-onlycurrentGW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby
1.3.6.1.4.1.20044.101.8.1.2.4Scalarpmcryptoe100DwlGwBank4Usedread-onlycurrentGW bank 4 active :This OID indicates the module is working on GW bank 4
1.3.6.1.4.1.20044.101.8.1.2.5Scalarpmcryptoe100DwlGwBank1Notemptyread-onlycurrentGW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package
1.3.6.1.4.1.20044.101.8.1.2.6Scalarpmcryptoe100DwlGwBank2Notemptyread-onlycurrentGW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2
1.3.6.1.4.1.20044.101.8.1.2.7Scalarpmcryptoe100DwlGwBank3Notemptyread-onlycurrentGW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package
1.3.6.1.4.1.20044.101.8.1.2.8Scalarpmcryptoe100DwlGwBank4Notemptyread-onlycurrentGW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4
1.3.6.1.4.1.20044.101.8.2Nodepmcryptoe100DwlClient
1.3.6.1.4.1.20044.101.8.3Nodepmcryptoe100DwlLine
1.3.6.1.4.1.20044.101.9Nodepmcryptoe100Config
1.3.6.1.4.1.20044.101.9.1Nodepmcryptoe100CfgAccessCAisCsf
1.3.6.1.4.1.20044.101.9.1.1Tablepmcryptoe100CfgClientcaiscsfTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.1.1.1Rowpmcryptoe100CfgClientcaiscsfEntrynot-accessiblecurrentRow definition for the accessCAisCsf table
1.3.6.1.4.1.20044.101.9.1.1.1.1Columnpmcryptoe100CfgClientcaiscsfIndexread-onlycurrentIndex definition for the clientcaiscsf table
1.3.6.1.4.1.20044.101.9.1.1.1.3Columnpmcryptoe100CfgReservePortnread-writecurrentCAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition
1.3.6.1.4.1.20044.101.9.2Nodepmcryptoe100CfgStartup
1.3.6.1.4.1.20044.101.9.2.1Tablepmcryptoe100CfgClientStartupTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.2.1.1Rowpmcryptoe100CfgClientStartupEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.101.9.2.1.1.1Columnpmcryptoe100CfgClientStartupIndexread-onlycurrentIndex definition for the clientStartup table
1.3.6.1.4.1.20044.101.9.2.1.1.3Columnpmcryptoe100CfgSystConfPortPortnread-writecurrentDefault Settings on Client Port :This register configures the default initialisation settings on the port.
1.3.6.1.4.1.20044.101.9.2.1.1.4Columnpmcryptoe100CfgNetConfPortPortnread-writecurrentDefault Settings on Client Port :This register configures the default initialisation settings on the port.
1.3.6.1.4.1.20044.101.9.2.1.1.14Columnpmcryptoe100CfgOptionsPortPortnread-writecurrentDefault Options on Client Port :This register configures the default options on the port.
1.3.6.1.4.1.20044.101.9.2.2Tablepmcryptoe100CfgLineStartupTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.2.2.1Rowpmcryptoe100CfgLineStartupEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.101.9.2.2.1.1Columnpmcryptoe100CfgLineStartupIndexread-onlycurrentIndex definition for the lineStartup table
1.3.6.1.4.1.20044.101.9.2.2.1.3Columnpmcryptoe100CfgSystConfLinePortnread-writecurrentDefault Settings on Line :This register configures the default initialisation settings on Line
1.3.6.1.4.1.20044.101.9.2.2.1.14Columnpmcryptoe100CfgOptionsLinePortnread-writecurrentDefault Options on Line :This register configures the default options on the line
1.3.6.1.4.1.20044.101.9.2.3Tablepmcryptoe100CfgXfpTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.2.3.1Rowpmcryptoe100CfgXfpEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.101.9.2.3.1.1Columnpmcryptoe100CfgXfpIndexread-onlycurrentIndex definition for the xfp table
1.3.6.1.4.1.20044.101.9.2.3.1.3Columnpmcryptoe100CfgSystConfMsaLinePortnread-writecurrentDefault settings on MSA :This register configures the default initialisation settings on MSA
1.3.6.1.4.1.20044.101.9.3Nodepmcryptoe100CfgLabels
1.3.6.1.4.1.20044.101.9.3.1Tablepmcryptoe100CfgLabelclientTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.3.1.1Rowpmcryptoe100CfgLabelclientEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.101.9.3.1.1.1Columnpmcryptoe100CfgLabelclientIndexread-onlycurrentIndex definition for the labelclient table
1.3.6.1.4.1.20044.101.9.3.1.1.3Columnpmcryptoe100CfgLabelclientPortnread-writecurrentDefault settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports.
1.3.6.1.4.1.20044.101.9.3.2Tablepmcryptoe100CfgLabellineTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.3.2.1Rowpmcryptoe100CfgLabellineEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.101.9.3.2.1.1Columnpmcryptoe100CfgLabellineIndexread-onlycurrentIndex definition for the labelline table
1.3.6.1.4.1.20044.101.9.3.2.1.3Columnpmcryptoe100CfgLabellinePortnread-writecurrentDefault settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines.
1.3.6.1.4.1.20044.101.9.4Nodepmcryptoe100CfgStartuptlh
1.3.6.1.4.1.20044.101.9.4.1Tablepmcryptoe100CfgOtxtlhTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.4.1.1Rowpmcryptoe100CfgOtxtlhEntrynot-accessiblecurrentRow definition for the startuptlh table
1.3.6.1.4.1.20044.101.9.4.1.1.1Columnpmcryptoe100CfgOtxtlhIndexread-onlycurrentIndex definition for the otxtlh table
1.3.6.1.4.1.20044.101.9.4.1.1.6Columnpmcryptoe100CfgLinePwrLaserPortnread-writecurrentDefaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm)
1.3.6.1.4.1.20044.101.9.4.1.1.7Columnpmcryptoe100CfgLineFCurrentPortnread-writecurrentDefault Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver
1.3.6.1.4.1.20044.101.9.4.1.1.8Columnpmcryptoe100CfgLineGridCurrentPortnread-writecurrentDefault Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver
1.3.6.1.4.1.20044.101.9.4.1.1.9Columnpmcryptoe100CfgFPortnread-writecurrentDefault Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver
1.3.6.1.4.1.20044.101.9.4.1.1.10Columnpmcryptoe100CfgRxLineFCurrentPortnread-writecurrentDefault Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver
1.3.6.1.4.1.20044.101.9.5Nodepmcryptoe100CfgOther
1.3.6.1.4.1.20044.101.9.5.1Nodepmcryptoe100tablemoduleOther
1.3.6.1.4.1.20044.101.9.5.1.2Scalarpmcryptoe100Cfgmoderead-writecurrentDefault settings on Module :This register selects the configuration mode of the module
1.3.6.1.4.1.20044.101.9.5.1.3Scalarpmcryptoe100CfgfanLowSpeedThresholdread-writecurrentDefault settings on Module :This register selects the speed threshold of the fan's
1.3.6.1.4.1.20044.101.9.5.1.4Scalarpmcryptoe100CfgfanHighSpeedThresholdread-writecurrentDefault settings on Module :This register selects the speed threshold of the fan's
1.3.6.1.4.1.20044.101.9.6Nodepmcryptoe100CfgStartuptablefive
1.3.6.1.4.1.20044.101.9.6.1Tablepmcryptoe100CfgOtxtlhcapabilitiesTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.101.9.6.1.1Rowpmcryptoe100CfgOtxtlhcapabilitiesEntrynot-accessiblecurrentRow definition for the startuptablefive table
1.3.6.1.4.1.20044.101.9.6.1.1.1Columnpmcryptoe100CfgOtxtlhcapabilitiesIndexread-onlycurrentIndex definition for the otxtlhcapabilities table
1.3.6.1.4.1.20044.101.9.6.1.1.3Columnpmcryptoe100CfgComponentTypePortnread-onlycurrentComponent parameters :This OID defines the component parameters
1.3.6.1.4.1.20044.101.9.6.1.1.4Columnpmcryptoe100CfgMiscellaneousPortnread-onlycurrentMiscellaneous default settings :This OID defines the miscellaneous parameters
1.3.6.1.4.1.20044.101.9.6.1.1.5Columnpmcryptoe100CfgFirstChannelPortnread-onlycurrentNumber of the first channel of the component :This OID defines the first channel number of the PM
1.3.6.1.4.1.20044.101.9.6.1.1.6Columnpmcryptoe100CfgLastChannelPortnread-onlycurrentNumber of the last channel of the component :This OID defines the last channel number of the PM
1.3.6.1.4.1.20044.101.9.6.1.1.7Columnpmcryptoe100CfgGridPortnread-onlycurrentGrid value of the component :This OID defines the grid of the PM
1.3.6.1.4.1.20044.101.9.257Scalarpmcryptoe100CfgWriteConfigurationread-writecurrentWrite configuration to module:This OID writes the complete configuration to the module
1.3.6.1.4.1.20044.101.10Nodepmcryptoe100traps
1.3.6.1.4.1.20044.101.10.2Scalarpmcryptoe100trapPortNumberread-onlycurrentLast port which generates a trap
1.3.6.1.4.1.20044.101.10.3Scalarpmcryptoe100trapLineNumberread-onlycurrentLast Line which generates a trap
1.3.6.1.4.1.20044.101.10.4Scalarpmcryptoe100trapBoardNumberread-onlycurrentLast module which generates a trap
1.3.6.1.4.1.20044.101.10.30Notificationpmcryptoe100LineTrapNotUrgentGoesOncurrentNot urgent Line default is activated
1.3.6.1.4.1.20044.101.10.31Notificationpmcryptoe100LineTrapNotUrgentGoesOffcurrentNot urgent Line default disappeared
1.3.6.1.4.1.20044.101.10.32Notificationpmcryptoe100LineTrapUrgentGoesOncurrentUrgent Line default is activated
1.3.6.1.4.1.20044.101.10.33Notificationpmcryptoe100LineTrapUrgentGoesOffcurrentUrgent Line default disappeared
1.3.6.1.4.1.20044.101.10.34Notificationpmcryptoe100LineTrapCritGoesOncurrentCritical Line default is activated
1.3.6.1.4.1.20044.101.10.35Notificationpmcryptoe100LineTrapCritGoesOffcurrentCritical Line default disappeared
1.3.6.1.4.1.20044.101.10.40Notificationpmcryptoe100ClientTrapNotUrgentGoesOncurrentNot urgent client default is activated
1.3.6.1.4.1.20044.101.10.41Notificationpmcryptoe100ClientTrapNotUrgentGoesOffcurrentNot urgent client default disappeared
1.3.6.1.4.1.20044.101.10.42Notificationpmcryptoe100ClientTrapUrgentGoesOncurrentUrgent client default is activated
1.3.6.1.4.1.20044.101.10.43Notificationpmcryptoe100ClientTrapUrgentGoesOffcurrentUrgent client default disappeared
1.3.6.1.4.1.20044.101.10.44Notificationpmcryptoe100ClientTrapCritGoesOncurrentCritical client default is activated
1.3.6.1.4.1.20044.101.10.45Notificationpmcryptoe100ClientTrapCritGoesOffcurrentCritical client default disappeared
1.3.6.1.4.1.20044.101.10.50Notificationpmcryptoe100PowerTrapUrgentGoesOncurrentUrgent power supply default is activated
1.3.6.1.4.1.20044.101.10.51Notificationpmcryptoe100PowerTrapUrgentGoesOffcurrentUrgent power supply default disappeared
1.3.6.1.4.1.20044.101.11Nodepmcryptoe100Monitoring
1.3.6.1.4.1.20044.101.11.1Nodepmcryptoe100MonOther
1.3.6.1.4.1.20044.101.11.1.3Nodepmcryptoe100MonRmon
1.3.6.1.4.1.20044.101.11.2Nodepmcryptoe100MonClient
1.3.6.1.4.1.20044.101.11.2.4Nodepmcryptoe100MonClientRmonCounter
1.3.6.1.4.1.20044.101.11.2.4.16Tablepmcryptoe100MonupRmonBytesCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonBytesCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.16.1Rowpmcryptoe100MonupRmonBytesCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonBytesCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.16.1.1Columnpmcryptoe100MonupRmonBytesCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonBytesCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.16.1.2Columnpmcryptoe100MonupRmonBytesCounterClientInputValuePortnread-onlycurrentClient Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th…
1.3.6.1.4.1.20044.101.11.2.4.16.1.3Columnpmcryptoe100MonupRmonBytesCounterClientInputErrorPortnread-onlycurrentBytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.16.1.4Columnpmcryptoe100MonupRmonBytesCounterClientInputOverloadPortnread-onlycurrentBytes Counter Overload :This OID when set indicates a Bytes counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.48Tablepmcryptoe100MonupRmonCrcErrorsCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonCrcErrorsCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.48.1Rowpmcryptoe100MonupRmonCrcErrorsCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonCrcErrorsCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.48.1.1Columnpmcryptoe100MonupRmonCrcErrorsCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonCrcErrorsCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.48.1.2Columnpmcryptoe100MonupRmonCrcErrorsCounterClientInputValuePortnread-onlycurrentClient Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei…
1.3.6.1.4.1.20044.101.11.2.4.48.1.3Columnpmcryptoe100MonupRmonCrcErrorsCounterClientInputErrorPortnread-onlycurrentCRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.48.1.4Columnpmcryptoe100MonupRmonCrcErrorsCounterClientInputOverloadPortnread-onlycurrentCRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.80Tablepmcryptoe100MonupRmonPacketsCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonPacketsCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.80.1Rowpmcryptoe100MonupRmonPacketsCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonPacketsCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.80.1.1Columnpmcryptoe100MonupRmonPacketsCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonPacketsCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.80.1.2Columnpmcryptoe100MonupRmonPacketsCounterClientInputValuePortnread-onlycurrentClient Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t…
1.3.6.1.4.1.20044.101.11.2.4.80.1.3Columnpmcryptoe100MonupRmonPacketsCounterClientInputErrorPortnread-onlycurrentPackets Counter Error :This OID when set indicates the Packets counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.80.1.4Columnpmcryptoe100MonupRmonPacketsCounterClientInputOverloadPortnread-onlycurrentPackets Counter Overload :This OID when set indicates a Packets counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.112Tablepmcryptoe100MonupRmonBroadcastCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonBroadcastCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.112.1Rowpmcryptoe100MonupRmonBroadcastCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonBroadcastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.112.1.1Columnpmcryptoe100MonupRmonBroadcastCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonBroadcastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.112.1.2Columnpmcryptoe100MonupRmonBroadcastCounterClientInputValuePortnread-onlycurrentClient Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B…
1.3.6.1.4.1.20044.101.11.2.4.112.1.3Columnpmcryptoe100MonupRmonBroadcastCounterClientInputErrorPortnread-onlycurrentBroadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.112.1.4Columnpmcryptoe100MonupRmonBroadcastCounterClientInputOverloadPortnread-onlycurrentBroadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.144Tablepmcryptoe100MonupRmonMulticastCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonMulticastCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.144.1Rowpmcryptoe100MonupRmonMulticastCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonMulticastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.144.1.1Columnpmcryptoe100MonupRmonMulticastCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonMulticastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.144.1.2Columnpmcryptoe100MonupRmonMulticastCounterClientInputValuePortnread-onlycurrentClient Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M…
1.3.6.1.4.1.20044.101.11.2.4.144.1.3Columnpmcryptoe100MonupRmonMulticastCounterClientInputErrorPortnread-onlycurrentMulticast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.144.1.4Columnpmcryptoe100MonupRmonMulticastCounterClientInputOverloadPortnread-onlycurrentMulticast Counter Overload :This OID when set indicates a Multicast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.176Tablepmcryptoe100MonupRmonPauseFrameCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonPauseFrameCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.176.1Rowpmcryptoe100MonupRmonPauseFrameCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonPauseFrameCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.176.1.1Columnpmcryptoe100MonupRmonPauseFrameCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonPauseFrameCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.176.1.2Columnpmcryptoe100MonupRmonPauseFrameCounterClientInputValuePortnread-onlycurrentClient Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame…
1.3.6.1.4.1.20044.101.11.2.4.176.1.3Columnpmcryptoe100MonupRmonPauseFrameCounterClientInputErrorPortnread-onlycurrentPause Counter Error :This OID when set indicates the Pause counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.176.1.4Columnpmcryptoe100MonupRmonPauseFrameCounterClientInputOverloadPortnread-onlycurrentPause Counter Overload :This OID when set indicates a Pause counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.304Tablepmcryptoe100MonupRmonUnicastCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonUnicastCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.304.1Rowpmcryptoe100MonupRmonUnicastCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonUnicastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.304.1.1Columnpmcryptoe100MonupRmonUnicastCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonUnicastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.304.1.2Columnpmcryptoe100MonupRmonUnicastCounterClientInputValuePortnread-onlycurrentClient Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica…
1.3.6.1.4.1.20044.101.11.2.4.304.1.3Columnpmcryptoe100MonupRmonUnicastCounterClientInputErrorPortnread-onlycurrentUnicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.304.1.4Columnpmcryptoe100MonupRmonUnicastCounterClientInputOverloadPortnread-onlycurrentUnicast Counter Overload :This OID when set indicates a Unicast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.336Tablepmcryptoe100MonupRmonNonunicastCounterClientInputTablenot-accessiblecurrentList of pmcryptoe100MonupRmonNonunicastCounterClientInput Article
1.3.6.1.4.1.20044.101.11.2.4.336.1Rowpmcryptoe100MonupRmonNonunicastCounterClientInputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MonupRmonNonunicastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.336.1.1Columnpmcryptoe100MonupRmonNonunicastCounterClientInputIndexread-onlycurrentIndex definition for the pmcryptoe100MonupRmonNonunicastCounterClientInput table
1.3.6.1.4.1.20044.101.11.2.4.336.1.2Columnpmcryptoe100MonupRmonNonunicastCounterClientInputValuePortnread-onlycurrentClient Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number …
1.3.6.1.4.1.20044.101.11.2.4.336.1.3Columnpmcryptoe100MonupRmonNonunicastCounterClientInputErrorPortnread-onlycurrentNon Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.336.1.4Columnpmcryptoe100MonupRmonNonunicastCounterClientInputOverloadPortnread-onlycurrentNon Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.400Tablepmcryptoe100MondownRmonBytesCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonBytesCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.400.1Rowpmcryptoe100MondownRmonBytesCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonBytesCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.400.1.1Columnpmcryptoe100MondownRmonBytesCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonBytesCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.400.1.2Columnpmcryptoe100MondownRmonBytesCounterClientOutputValuePortnread-onlycurrentClient Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte…
1.3.6.1.4.1.20044.101.11.2.4.400.1.3Columnpmcryptoe100MondownRmonBytesCounterClientOutputErrorPortnread-onlycurrentBytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.400.1.4Columnpmcryptoe100MondownRmonBytesCounterClientOutputOverloadPortnread-onlycurrentBytes Counter Overload :This OID when set indicates a Bytes counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.432Tablepmcryptoe100MondownRmonCrcErrorsCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonCrcErrorsCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.432.1Rowpmcryptoe100MondownRmonCrcErrorsCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonCrcErrorsCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.432.1.1Columnpmcryptoe100MondownRmonCrcErrorsCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonCrcErrorsCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.432.1.2Columnpmcryptoe100MondownRmonCrcErrorsCounterClientOutputValuePortnread-onlycurrentClient Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E…
1.3.6.1.4.1.20044.101.11.2.4.432.1.3Columnpmcryptoe100MondownRmonCrcErrorsCounterClientOutputErrorPortnread-onlycurrentCRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.432.1.4Columnpmcryptoe100MondownRmonCrcErrorsCounterClientOutputOverloadPortnread-onlycurrentCRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.464Tablepmcryptoe100MondownRmonPacketsCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonPacketsCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.464.1Rowpmcryptoe100MondownRmonPacketsCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonPacketsCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.464.1.1Columnpmcryptoe100MondownRmonPacketsCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonPacketsCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.464.1.2Columnpmcryptoe100MondownRmonPacketsCounterClientOutputValuePortnread-onlycurrentClient Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt…
1.3.6.1.4.1.20044.101.11.2.4.464.1.3Columnpmcryptoe100MondownRmonPacketsCounterClientOutputErrorPortnread-onlycurrentPackets Counter Error :This OID when set indicates the Packets counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.464.1.4Columnpmcryptoe100MondownRmonPacketsCounterClientOutputOverloadPortnread-onlycurrentPackets Counter Overload :This OID when set indicates a Packets counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.496Tablepmcryptoe100MondownRmonBroadcastCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonBroadcastCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.496.1Rowpmcryptoe100MondownRmonBroadcastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonBroadcastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.496.1.1Columnpmcryptoe100MondownRmonBroadcastCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonBroadcastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.496.1.2Columnpmcryptoe100MondownRmonBroadcastCounterClientOutputValuePortnread-onlycurrentClient Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number …
1.3.6.1.4.1.20044.101.11.2.4.496.1.3Columnpmcryptoe100MondownRmonBroadcastCounterClientOutputErrorPortnread-onlycurrentBroadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.496.1.4Columnpmcryptoe100MondownRmonBroadcastCounterClientOutputOverloadPortnread-onlycurrentBroadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.528Tablepmcryptoe100MondownRmonMulticastCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonMulticastCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.528.1Rowpmcryptoe100MondownRmonMulticastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonMulticastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.528.1.1Columnpmcryptoe100MondownRmonMulticastCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonMulticastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.528.1.2Columnpmcryptoe100MondownRmonMulticastCounterClientOutputValuePortnread-onlycurrentClient Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number …
1.3.6.1.4.1.20044.101.11.2.4.528.1.3Columnpmcryptoe100MondownRmonMulticastCounterClientOutputErrorPortnread-onlycurrentMulticast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.528.1.4Columnpmcryptoe100MondownRmonMulticastCounterClientOutputOverloadPortnread-onlycurrentMulticast Counter Overload :This OID when set indicates a Multicast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.560Tablepmcryptoe100MondownRmonPauseFrameCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonPauseFrameCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.560.1Rowpmcryptoe100MondownRmonPauseFrameCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonPauseFrameCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.560.1.1Columnpmcryptoe100MondownRmonPauseFrameCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonPauseFrameCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.560.1.2Columnpmcryptoe100MondownRmonPauseFrameCounterClientOutputValuePortnread-onlycurrentClient Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f…
1.3.6.1.4.1.20044.101.11.2.4.560.1.3Columnpmcryptoe100MondownRmonPauseFrameCounterClientOutputErrorPortnread-onlycurrentPause Counter Error :This OID when set indicates the Pause counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.560.1.4Columnpmcryptoe100MondownRmonPauseFrameCounterClientOutputOverloadPortnread-onlycurrentPause Counter Overload :This OID when set indicates a Pause counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.688Tablepmcryptoe100MondownRmonUnicastCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonUnicastCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.688.1Rowpmcryptoe100MondownRmonUnicastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonUnicastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.688.1.1Columnpmcryptoe100MondownRmonUnicastCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonUnicastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.688.1.2Columnpmcryptoe100MondownRmonUnicastCounterClientOutputValuePortnread-onlycurrentClient Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U…
1.3.6.1.4.1.20044.101.11.2.4.688.1.3Columnpmcryptoe100MondownRmonUnicastCounterClientOutputErrorPortnread-onlycurrentUnicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.688.1.4Columnpmcryptoe100MondownRmonUnicastCounterClientOutputOverloadPortnread-onlycurrentUnicast Counter Overload :This OID when set indicates a Unicast counter overload on client port
1.3.6.1.4.1.20044.101.11.2.4.720Tablepmcryptoe100MondownRmonNonunicastCounterClientOutputTablenot-accessiblecurrentList of pmcryptoe100MondownRmonNonunicastCounterClientOutput Article
1.3.6.1.4.1.20044.101.11.2.4.720.1Rowpmcryptoe100MondownRmonNonunicastCounterClientOutputEntrynot-accessiblecurrentRow definition for the pmcryptoe100MondownRmonNonunicastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.720.1.1Columnpmcryptoe100MondownRmonNonunicastCounterClientOutputIndexread-onlycurrentIndex definition for the pmcryptoe100MondownRmonNonunicastCounterClientOutput table
1.3.6.1.4.1.20044.101.11.2.4.720.1.2Columnpmcryptoe100MondownRmonNonunicastCounterClientOutputValuePortnread-onlycurrentClient Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num…
1.3.6.1.4.1.20044.101.11.2.4.720.1.3Columnpmcryptoe100MondownRmonNonunicastCounterClientOutputErrorPortnread-onlycurrentNon Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port
1.3.6.1.4.1.20044.101.11.2.4.720.1.4Columnpmcryptoe100MondownRmonNonunicastCounterClientOutputOverloadPortnread-onlycurrentNon Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port
1.3.6.1.4.1.20044.101.11.5Nodepmcryptoe100MonPerfOther
1.3.6.1.4.1.20044.101.11.5.1Nodepmcryptoe100MonPerfSync
1.3.6.1.4.1.20044.101.11.5.1.257Scalarpmcryptoe100PerfEnableread-writecurrentPerf. Mon. Enable :This OID enables the Performance Monitoring application
1.3.6.1.4.1.20044.101.11.5.1.259Scalarpmcryptoe100Perf15minSyncread-writecurrentPerf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command
1.3.6.1.4.1.20044.101.11.5.1.260Scalarpmcryptoe100Perf24hSyncread-writecurrentPerf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command
1.3.6.1.4.1.20044.101.11.5.2Nodepmcryptoe100MonPerfTimeStamp
1.3.6.1.4.1.20044.101.11.5.2.1Scalarpmcryptoe100Perf15MinShortread-writecurrent15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds
1.3.6.1.4.1.20044.101.11.5.2.2Scalarpmcryptoe100Perf15MinLongread-writecurrent15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds
1.3.6.1.4.1.20044.101.11.5.2.5Scalarpmcryptoe100Perf24HoursShortread-writecurrent24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds
1.3.6.1.4.1.20044.101.11.5.2.6Scalarpmcryptoe100Perf24HoursLongread-writecurrent24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds
1.3.6.1.4.1.20044.101.11.5.2.7Scalarpmcryptoe100PerfCurrent15MinElapsedTimeread-writecurrentCurrent 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period
1.3.6.1.4.1.20044.101.11.5.2.8Scalarpmcryptoe100PerfCurrent24HoursElapsedTimeread-writecurrentCurrent 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period
1.3.6.1.4.1.20044.101.11.6Nodepmcryptoe100MonPerfClient
1.3.6.1.4.1.20044.101.11.6.16Tablepmcryptoe100PerfTelecomInputClientCurrent15StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomInputClientCurrent15Stat Article
1.3.6.1.4.1.20044.101.11.6.16.1Rowpmcryptoe100PerfTelecomInputClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomInputClientCurrent15Stat table
1.3.6.1.4.1.20044.101.11.6.16.1.1Columnpmcryptoe100PerfTelecomInputClientCurrent15StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomInputClientCurrent15Stat table
1.3.6.1.4.1.20044.101.11.6.16.1.2Columnpmcryptoe100PerfTelecomInputClientCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.16.1.3Columnpmcryptoe100PerfTelecomInputClientCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.16.1.4Columnpmcryptoe100PerfTelecomInputClientCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.16.1.5Columnpmcryptoe100PerfTelecomInputClientCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.16.1.6Columnpmcryptoe100PerfTelecomInputClientCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.16.1.7Columnpmcryptoe100PerfTelecomInputClientCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.16.1.8Columnpmcryptoe100PerfTelecomInputClientCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.16.1.9Columnpmcryptoe100PerfTelecomInputClientCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.16.1.10Columnpmcryptoe100PerfTelecomInputClientCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.16.1.11Columnpmcryptoe100PerfTelecomInputClientCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.48Tablepmcryptoe100PerfTelecomInputClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomInputClientPast15StatHistory Article
1.3.6.1.4.1.20044.101.11.6.48.1Rowpmcryptoe100PerfTelecomInputClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomInputClientPast15StatHistory table
1.3.6.1.4.1.20044.101.11.6.48.1.1Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomInputClientPast15StatHistory table
1.3.6.1.4.1.20044.101.11.6.48.1.2Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.48.1.3Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.48.1.4Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.48.1.5Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.48.1.6Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.48.1.7Columnpmcryptoe100PerfTelecomInputClientPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.48.1.8Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.48.1.9Columnpmcryptoe100PerfTelecomInputClientPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.48.1.10Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.48.1.11Columnpmcryptoe100PerfTelecomInputClientPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.80Tablepmcryptoe100PerfTelecomInputClientCurrent24StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomInputClientCurrent24Stat Article
1.3.6.1.4.1.20044.101.11.6.80.1Rowpmcryptoe100PerfTelecomInputClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomInputClientCurrent24Stat table
1.3.6.1.4.1.20044.101.11.6.80.1.1Columnpmcryptoe100PerfTelecomInputClientCurrent24StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomInputClientCurrent24Stat table
1.3.6.1.4.1.20044.101.11.6.80.1.2Columnpmcryptoe100PerfTelecomInputClientCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.80.1.3Columnpmcryptoe100PerfTelecomInputClientCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.80.1.4Columnpmcryptoe100PerfTelecomInputClientCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.80.1.5Columnpmcryptoe100PerfTelecomInputClientCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.80.1.6Columnpmcryptoe100PerfTelecomInputClientCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.80.1.7Columnpmcryptoe100PerfTelecomInputClientCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.80.1.8Columnpmcryptoe100PerfTelecomInputClientCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.80.1.9Columnpmcryptoe100PerfTelecomInputClientCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.80.1.10Columnpmcryptoe100PerfTelecomInputClientCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.80.1.11Columnpmcryptoe100PerfTelecomInputClientCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.112Tablepmcryptoe100PerfTelecomInputClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomInputClientPast24StatHistory Article
1.3.6.1.4.1.20044.101.11.6.112.1Rowpmcryptoe100PerfTelecomInputClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomInputClientPast24StatHistory table
1.3.6.1.4.1.20044.101.11.6.112.1.1Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomInputClientPast24StatHistory table
1.3.6.1.4.1.20044.101.11.6.112.1.2Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.112.1.3Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.112.1.4Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.112.1.5Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.112.1.6Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.112.1.7Columnpmcryptoe100PerfTelecomInputClientPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.112.1.8Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.112.1.9Columnpmcryptoe100PerfTelecomInputClientPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.112.1.10Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.112.1.11Columnpmcryptoe100PerfTelecomInputClientPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.144Tablepmcryptoe100PerfTelecomOutputClientCurrent15StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomOutputClientCurrent15Stat Article
1.3.6.1.4.1.20044.101.11.6.144.1Rowpmcryptoe100PerfTelecomOutputClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomOutputClientCurrent15Stat table
1.3.6.1.4.1.20044.101.11.6.144.1.1Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomOutputClientCurrent15Stat table
1.3.6.1.4.1.20044.101.11.6.144.1.2Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.144.1.3Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.144.1.4Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.144.1.5Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.144.1.6Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.144.1.7Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.144.1.8Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.144.1.9Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.144.1.10Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.144.1.11Columnpmcryptoe100PerfTelecomOutputClientCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.176Tablepmcryptoe100PerfTelecomOutputClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomOutputClientPast15StatHistory Article
1.3.6.1.4.1.20044.101.11.6.176.1Rowpmcryptoe100PerfTelecomOutputClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomOutputClientPast15StatHistory table
1.3.6.1.4.1.20044.101.11.6.176.1.1Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomOutputClientPast15StatHistory table
1.3.6.1.4.1.20044.101.11.6.176.1.2Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.176.1.3Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.176.1.4Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.176.1.5Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.176.1.6Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.176.1.7Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.176.1.8Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.176.1.9Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.176.1.10Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.176.1.11Columnpmcryptoe100PerfTelecomOutputClientPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.208Tablepmcryptoe100PerfTelecomOutputClientCurrent24StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomOutputClientCurrent24Stat Article
1.3.6.1.4.1.20044.101.11.6.208.1Rowpmcryptoe100PerfTelecomOutputClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomOutputClientCurrent24Stat table
1.3.6.1.4.1.20044.101.11.6.208.1.1Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomOutputClientCurrent24Stat table
1.3.6.1.4.1.20044.101.11.6.208.1.2Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.208.1.3Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.208.1.4Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.208.1.5Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.208.1.6Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.208.1.7Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.208.1.8Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.208.1.9Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.208.1.10Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.208.1.11Columnpmcryptoe100PerfTelecomOutputClientCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.240Tablepmcryptoe100PerfTelecomOutputClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomOutputClientPast24StatHistory Article
1.3.6.1.4.1.20044.101.11.6.240.1Rowpmcryptoe100PerfTelecomOutputClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomOutputClientPast24StatHistory table
1.3.6.1.4.1.20044.101.11.6.240.1.1Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomOutputClientPast24StatHistory table
1.3.6.1.4.1.20044.101.11.6.240.1.2Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.6.240.1.3Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.6.240.1.4Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.240.1.5Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.240.1.6Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.240.1.7Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.6.240.1.8Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.240.1.9Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.6.240.1.10Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.6.240.1.11Columnpmcryptoe100PerfTelecomOutputClientPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.6.848Tablepmcryptoe100PerfDatacomClientCurrent15StatTablenot-accessiblecurrentList of pmcryptoe100PerfDatacomClientCurrent15Stat Article
1.3.6.1.4.1.20044.101.11.6.848.1Rowpmcryptoe100PerfDatacomClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfDatacomClientCurrent15Stat table
1.3.6.1.4.1.20044.101.11.6.848.1.1Columnpmcryptoe100PerfDatacomClientCurrent15StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfDatacomClientCurrent15Stat table
1.3.6.1.4.1.20044.101.11.6.848.1.4Columnpmcryptoe100perfdatacomclientCurrent15StatInCrcCountInvPortnread-onlycurrentClient Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.848.1.5Columnpmcryptoe100perfdatacomclientCurrent15StatInCrcCountPortnread-onlycurrentClient Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value
1.3.6.1.4.1.20044.101.11.6.848.1.6Columnpmcryptoe100perfdatacomclientCurrent15StatInPacketCountInvPortnread-onlycurrentClient Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid
1.3.6.1.4.1.20044.101.11.6.848.1.7Columnpmcryptoe100perfdatacomclientCurrent15StatInPacketCountPortnread-onlycurrentClient Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value
1.3.6.1.4.1.20044.101.11.6.848.1.28Columnpmcryptoe100perfdatacomclientCurrent15StatOutCrcCountInvPortnread-onlycurrentClient Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.848.1.29Columnpmcryptoe100perfdatacomclientCurrent15StatOutCrcCountPortnread-onlycurrentClient Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value
1.3.6.1.4.1.20044.101.11.6.848.1.30Columnpmcryptoe100perfdatacomclientCurrent15StatOutPacketCountInvPortnread-onlycurrentClient Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid
1.3.6.1.4.1.20044.101.11.6.848.1.31Columnpmcryptoe100perfdatacomclientCurrent15StatOutPacketCountPortnread-onlycurrentClient Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value
1.3.6.1.4.1.20044.101.11.6.880Tablepmcryptoe100PerfDatacomClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfDatacomClientPast15StatHistory Article
1.3.6.1.4.1.20044.101.11.6.880.1Rowpmcryptoe100PerfDatacomClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfDatacomClientPast15StatHistory table
1.3.6.1.4.1.20044.101.11.6.880.1.1Columnpmcryptoe100PerfDatacomClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfDatacomClientPast15StatHistory table
1.3.6.1.4.1.20044.101.11.6.880.1.4Columnpmcryptoe100perfdatacomclientPast15StatInCrcCountInvPort1read-onlycurrentClient Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.880.1.5Columnpmcryptoe100perfdatacomclientPast15StatInCrcCountPort1read-onlycurrentClient Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value
1.3.6.1.4.1.20044.101.11.6.880.1.6Columnpmcryptoe100perfdatacomclientPast15StatInPacketCountInvPort1read-onlycurrentClient Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid
1.3.6.1.4.1.20044.101.11.6.880.1.7Columnpmcryptoe100perfdatacomclientPast15StatInPacketCountPort1read-onlycurrentClient Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value
1.3.6.1.4.1.20044.101.11.6.880.1.28Columnpmcryptoe100perfdatacomclientPast15StatOutCrcCountInvPort1read-onlycurrentClient Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.880.1.29Columnpmcryptoe100perfdatacomclientPast15StatOutCrcCountPort1read-onlycurrentClient Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value
1.3.6.1.4.1.20044.101.11.6.880.1.30Columnpmcryptoe100perfdatacomclientPast15StatOutPacketCountInvPort1read-onlycurrentClient Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid
1.3.6.1.4.1.20044.101.11.6.880.1.31Columnpmcryptoe100perfdatacomclientPast15StatOutPacketCountPort1read-onlycurrentClient Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value
1.3.6.1.4.1.20044.101.11.6.912Tablepmcryptoe100PerfDatacomClientCurrent24StatTablenot-accessiblecurrentList of pmcryptoe100PerfDatacomClientCurrent24Stat Article
1.3.6.1.4.1.20044.101.11.6.912.1Rowpmcryptoe100PerfDatacomClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfDatacomClientCurrent24Stat table
1.3.6.1.4.1.20044.101.11.6.912.1.1Columnpmcryptoe100PerfDatacomClientCurrent24StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfDatacomClientCurrent24Stat table
1.3.6.1.4.1.20044.101.11.6.912.1.4Columnpmcryptoe100perfdatacomclientCurrent24StatInCrcCountInvPortnread-onlycurrentClient Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.912.1.5Columnpmcryptoe100perfdatacomclientCurrent24StatInCrcCountPortnread-onlycurrentClient Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value
1.3.6.1.4.1.20044.101.11.6.912.1.6Columnpmcryptoe100perfdatacomclientCurrent24StatInPacketCountInvPortnread-onlycurrentClient Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid
1.3.6.1.4.1.20044.101.11.6.912.1.7Columnpmcryptoe100perfdatacomclientCurrent24StatInPacketCountPortnread-onlycurrentClient Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value
1.3.6.1.4.1.20044.101.11.6.912.1.28Columnpmcryptoe100perfdatacomclientCurrent24StatOutCrcCountInvPortnread-onlycurrentClient Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.912.1.29Columnpmcryptoe100perfdatacomclientCurrent24StatOutCrcCountPortnread-onlycurrentClient Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value
1.3.6.1.4.1.20044.101.11.6.912.1.30Columnpmcryptoe100perfdatacomclientCurrent24StatOutPacketCountInvPortnread-onlycurrentClient Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid
1.3.6.1.4.1.20044.101.11.6.912.1.31Columnpmcryptoe100perfdatacomclientCurrent24StatOutPacketCountPortnread-onlycurrentClient Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value
1.3.6.1.4.1.20044.101.11.6.944Tablepmcryptoe100PerfDatacomClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfDatacomClientPast24StatHistory Article
1.3.6.1.4.1.20044.101.11.6.944.1Rowpmcryptoe100PerfDatacomClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfDatacomClientPast24StatHistory table
1.3.6.1.4.1.20044.101.11.6.944.1.1Columnpmcryptoe100PerfDatacomClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfDatacomClientPast24StatHistory table
1.3.6.1.4.1.20044.101.11.6.944.1.4Columnpmcryptoe100perfdatacomclientPast24StatInCrcCountInvPort1read-onlycurrentClient Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.944.1.5Columnpmcryptoe100perfdatacomclientPast24StatInCrcCountPort1read-onlycurrentClient Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value
1.3.6.1.4.1.20044.101.11.6.944.1.6Columnpmcryptoe100perfdatacomclientPast24StatInPacketCountInvPort1read-onlycurrentClient Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid
1.3.6.1.4.1.20044.101.11.6.944.1.7Columnpmcryptoe100perfdatacomclientPast24StatInPacketCountPort1read-onlycurrentClient Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value
1.3.6.1.4.1.20044.101.11.6.944.1.28Columnpmcryptoe100perfdatacomclientPast24StatOutCrcCountInvPort1read-onlycurrentClient Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid
1.3.6.1.4.1.20044.101.11.6.944.1.29Columnpmcryptoe100perfdatacomclientPast24StatOutCrcCountPort1read-onlycurrentClient Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value
1.3.6.1.4.1.20044.101.11.6.944.1.30Columnpmcryptoe100perfdatacomclientPast24StatOutPacketCountInvPort1read-onlycurrentClient Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid
1.3.6.1.4.1.20044.101.11.6.944.1.31Columnpmcryptoe100perfdatacomclientPast24StatOutPacketCountPort1read-onlycurrentClient Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value
1.3.6.1.4.1.20044.101.11.7Nodepmcryptoe100MonPerfLine
1.3.6.1.4.1.20044.101.11.7.336Tablepmcryptoe100PerfTelecomLinePostFecCurrent15StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomLinePostFecCurrent15Stat Article
1.3.6.1.4.1.20044.101.11.7.336.1Rowpmcryptoe100PerfTelecomLinePostFecCurrent15StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomLinePostFecCurrent15Stat table
1.3.6.1.4.1.20044.101.11.7.336.1.1Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomLinePostFecCurrent15Stat table
1.3.6.1.4.1.20044.101.11.7.336.1.2Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.336.1.3Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.336.1.4Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.336.1.5Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.336.1.6Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.336.1.7Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.336.1.8Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.336.1.9Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.7.336.1.10Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.336.1.11Columnpmcryptoe100PerfTelecomLinePostFecCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.7.337Tablepmcryptoe100PerfTelecomLinePostFecPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomLinePostFecPast15StatHistory Article
1.3.6.1.4.1.20044.101.11.7.337.1Rowpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomLinePostFecPast15StatHistory table
1.3.6.1.4.1.20044.101.11.7.337.1.1Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomLinePostFecPast15StatHistory table
1.3.6.1.4.1.20044.101.11.7.337.1.2Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.337.1.3Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.337.1.4Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.337.1.5Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.337.1.6Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.337.1.7Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.337.1.8Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.337.1.9Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.7.337.1.10Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.337.1.11Columnpmcryptoe100PerfTelecomLinePostFecPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.7.338Tablepmcryptoe100PerfTelecomLinePostFecCurrent24StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomLinePostFecCurrent24Stat Article
1.3.6.1.4.1.20044.101.11.7.338.1Rowpmcryptoe100PerfTelecomLinePostFecCurrent24StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomLinePostFecCurrent24Stat table
1.3.6.1.4.1.20044.101.11.7.338.1.1Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomLinePostFecCurrent24Stat table
1.3.6.1.4.1.20044.101.11.7.338.1.2Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.338.1.3Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.338.1.4Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.338.1.5Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.338.1.6Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.338.1.7Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.338.1.8Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.338.1.9Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.7.338.1.10Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.338.1.11Columnpmcryptoe100PerfTelecomLinePostFecCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.7.339Tablepmcryptoe100PerfTelecomLinePostFecPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomLinePostFecPast24StatHistory Article
1.3.6.1.4.1.20044.101.11.7.339.1Rowpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomLinePostFecPast24StatHistory table
1.3.6.1.4.1.20044.101.11.7.339.1.1Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomLinePostFecPast24StatHistory table
1.3.6.1.4.1.20044.101.11.7.339.1.2Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.339.1.3Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.339.1.4Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.339.1.5Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.339.1.6Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.339.1.7Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.339.1.8Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.339.1.9Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.101.11.7.339.1.10Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.339.1.11Columnpmcryptoe100PerfTelecomLinePostFecPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.101.11.7.352Tablepmcryptoe100PerfTelecomBerLinePreFecCurrent15StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomBerLinePreFecCurrent15Stat Article
1.3.6.1.4.1.20044.101.11.7.352.1Rowpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomBerLinePreFecCurrent15Stat table
1.3.6.1.4.1.20044.101.11.7.352.1.1Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomBerLinePreFecCurrent15Stat table
1.3.6.1.4.1.20044.101.11.7.352.1.2Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatInvBerPortnread-onlycurrentCurrent 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.352.1.3Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatBerValuePortnread-onlycurrentCurrent 15-min BER counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.352.1.4Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortnread-onlycurrentCurrent 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.352.1.5Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortnread-onlycurrentCurrent 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.352.1.6Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortnread-onlycurrentCurrent 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.352.1.7Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortnread-onlycurrentCurrent 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.353Tablepmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomBerLinePreFecPast15StatHistory Article
1.3.6.1.4.1.20044.101.11.7.353.1Rowpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomBerLinePreFecPast15StatHistory table
1.3.6.1.4.1.20044.101.11.7.353.1.1Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomBerLinePreFecPast15StatHistory table
1.3.6.1.4.1.20044.101.11.7.353.1.2Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1read-onlycurrentPrevious 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.353.1.3Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1read-onlycurrentPrevious 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.353.1.4Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1read-onlycurrentPrevious 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.353.1.5Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1read-onlycurrentPrevious 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.353.1.6Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1read-onlycurrentPrevious 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.353.1.7Columnpmcryptoe100PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1read-onlycurrentPrevious 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.354Tablepmcryptoe100PerfTelecomBerLinePreFecCurrent24StatTablenot-accessiblecurrentList of pmcryptoe100PerfTelecomBerLinePreFecCurrent24Stat Article
1.3.6.1.4.1.20044.101.11.7.354.1Rowpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatEntrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomBerLinePreFecCurrent24Stat table
1.3.6.1.4.1.20044.101.11.7.354.1.1Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatIndexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomBerLinePreFecCurrent24Stat table
1.3.6.1.4.1.20044.101.11.7.354.1.2Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatInvBerPortnread-onlycurrentCurrent 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.354.1.3Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatBerValuePortnread-onlycurrentCurrent 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.354.1.4Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortnread-onlycurrentCurrent 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.354.1.5Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortnread-onlycurrentCurrent 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.354.1.6Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortnread-onlycurrentCurrent 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.354.1.7Columnpmcryptoe100PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortnread-onlycurrentCurrent 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.355Tablepmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmcryptoe100PerfTelecomBerLinePreFecPast24StatHistory Article
1.3.6.1.4.1.20044.101.11.7.355.1Rowpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmcryptoe100PerfTelecomBerLinePreFecPast24StatHistory table
1.3.6.1.4.1.20044.101.11.7.355.1.1Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmcryptoe100PerfTelecomBerLinePreFecPast24StatHistory table
1.3.6.1.4.1.20044.101.11.7.355.1.2Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1read-onlycurrentPrevious 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.101.11.7.355.1.3Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1read-onlycurrentPrevious 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.101.11.7.355.1.4Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1read-onlycurrentPrevious 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.355.1.5Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1read-onlycurrentPrevious 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.101.11.7.355.1.6Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1read-onlycurrentPrevious 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.101.11.7.355.1.7Columnpmcryptoe100PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1read-onlycurrentPrevious 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value
Type Definitions
NameSyntaxStatusDescription
Pmcryptoe100ClientProtocolAINTEGER { protocolclientvalue0A(1), protocolclientvalue1A(2), protocolclientvalue2A(3) }currentDifferent values on the protocol on the client ports
Pmcryptoe100ClientProtocolBINTEGER { protocolclientvalue0B(1), protocolclientvalue1B(2), protocolclientvalue2B(3), protocolclientvalue3B(4), protocolclientvalue4B(5) }currentDifferent values on the protocol on the client ports
Pmcryptoe100ClientProtocolCINTEGER { protocolclientvalue0C(1) }currentDifferent values on the protocol on the client ports
Pmcryptoe100DccModeINTEGER { dccNo(0), dccLine1(1), dccLine2(2) }currentMode for DCC
Pmcryptoe100OrxChannelINTEGERcurrentChannel selection on transceiver Rx line ports
Pmcryptoe100OtxChannelINTEGERcurrentChannel selection on transceiver Tx line ports
Pmcryptoe100OtxGridINTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) }currentDifferent grids on OTX-TLH on client and line ports
Pmcryptoe100ProtocolModeINTEGER { protocolmodevalue0(1), protocolmodevalue1(2), protocolmodevalue2(3) }currentDifferent values on the protocol mode
MIB Viewer