EKINOPS-Pme1008-MIB
482 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.79 | IdentitymodulePme1008 | Creation. | ||
| 1.3.6.1.4.1.20044.79.2 | Nodepme1008alarms | |||
| 1.3.6.1.4.1.20044.79.2.1 | Nodepme1008AlmOther | |||
| 1.3.6.1.4.1.20044.79.2.1.1 | Nodepme1008AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.79.2.1.1.2 | Nodepme1008AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.79.2.1.1.2.1 | Scalarpme1008AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.79.2.1.1.2.2 | Scalarpme1008AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.79.2.1.1.2.3 | Scalarpme1008AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.79.2.1.1.2.4 | Scalarpme1008AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.79.2.1.2 | Nodepme1008AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.79.2.1.3 | Nodepme1008AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.79.2.1.3.0 | Nodepme1008AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.79.2.1.3.0.9 | Scalarpme1008AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.79.2.1.3.0.15 | Scalarpme1008AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.79.2.1.3.0.16 | Scalarpme1008AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.79.2.2 | Nodepme1008AlmClient | |||
| 1.3.6.1.4.1.20044.79.2.2.1 | Nodepme1008AlmClientNurg | |||
| 1.3.6.1.4.1.20044.79.2.2.1.232 | Tablepme1008AlmclientSfpWarnDdmTable | not-accessible | current | List of pme1008AlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1 | Rowpme1008AlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pme1008AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.1 | Columnpme1008AlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pme1008AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.2 | Columnpme1008AlmClientTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.3 | Columnpme1008AlmClientTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.4 | Columnpme1008AlmClientTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.5 | Columnpme1008AlmClientTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.6 | Columnpme1008AlmClientVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.7 | Columnpme1008AlmClientVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.8 | Columnpme1008AlmClientTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.9 | Columnpme1008AlmClientTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.16 | Columnpme1008AlmClientRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.79.2.2.1.232.1.17 | Columnpme1008AlmClientRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.79.2.2.2 | Nodepme1008AlmClientUrg | |||
| 1.3.6.1.4.1.20044.79.2.2.2.88 | Tablepme1008AlmclientHostLaneFaultTable | not-accessible | current | List of pme1008AlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.79.2.2.2.88.1 | Rowpme1008AlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pme1008AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.79.2.2.2.88.1.1 | Columnpme1008AlmclientHostLaneFaultIndex | read-only | current | Index definition for the pme1008AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.79.2.2.2.88.1.2 | Columnpme1008AlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.79.2.2.2.88.1.3 | Columnpme1008AlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.79.2.2.2.88.1.7 | Columnpme1008AlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.79.2.2.2.88.1.11 | Columnpme1008AlmClientLaneTxFifoErrorPortn | read-only | current | Client Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv <Help> Alarm indicating a Tx FIFO Error on the Client Trscv <Condtype> CLIENT_LANE… |
| 1.3.6.1.4.1.20044.79.2.2.2.216 | Tablepme1008AlmclientSfpAlmDdmTable | not-accessible | current | List of pme1008AlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1 | Rowpme1008AlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pme1008AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.1 | Columnpme1008AlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pme1008AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.2 | Columnpme1008AlmClientTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.3 | Columnpme1008AlmClientTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.4 | Columnpme1008AlmClientTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.5 | Columnpme1008AlmClientTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.6 | Columnpme1008AlmClientVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.7 | Columnpme1008AlmClientVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.8 | Columnpme1008AlmClientTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.9 | Columnpme1008AlmClientTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.16 | Columnpme1008AlmClientRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.79.2.2.2.216.1.17 | Columnpme1008AlmClientRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.79.2.2.3 | Nodepme1008AlmClientCrit | |||
| 1.3.6.1.4.1.20044.79.2.2.3.8 | Tablepme1008AlmsynthAlmPortTable | not-accessible | current | List of pme1008AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1 | Rowpme1008AlmsynthAlmPortEntry | not-accessible | current | Row definition for the pme1008AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.1 | Columnpme1008AlmsynthAlmPortIndex | read-only | current | Index definition for the pme1008AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.2 | Columnpme1008AlmSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver is not plug… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.3 | Columnpme1008AlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.5 | Columnpme1008AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.6 | Columnpme1008AlmDwLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdown… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.7 | Columnpme1008AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.8 | Columnpme1008AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.9 | Columnpme1008AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.10 | Columnpme1008AlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.11 | Columnpme1008AlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.13 | Columnpme1008AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.79.2.2.3.8.1.17 | Columnpme1008AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.79.2.3 | Nodepme1008AlmLine | |||
| 1.3.6.1.4.1.20044.79.2.3.1 | Nodepme1008AlmLineNurg | |||
| 1.3.6.1.4.1.20044.79.2.3.2 | Nodepme1008AlmLineUrg | |||
| 1.3.6.1.4.1.20044.79.2.3.2.104 | Tablepme1008AlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pme1008AlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1 | Rowpme1008AlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pme1008AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.1 | Columnpme1008AlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pme1008AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.2 | Columnpme1008AlmLineTxPwrLowAlaPortn | read-only | current | Line Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.3 | Columnpme1008AlmLineTxPwrHighAlaPortn | read-only | current | Line Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.4 | Columnpme1008AlmLineTxBiasLowAlaPortn | read-only | current | Line Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.5 | Columnpme1008AlmLineTxBiasHighAlaPortn | read-only | current | Line Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.6 | Columnpme1008AlmLineVccLowAlaPortn | read-only | current | Line Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.7 | Columnpme1008AlmLineVccHighAlaPortn | read-only | current | Line Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.8 | Columnpme1008AlmLineTempLowAlaPortn | read-only | current | Line Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.9 | Columnpme1008AlmLineTempHighAlaPortn | read-only | current | Line Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.16 | Columnpme1008AlmLineRxPwrLowAlaPortn | read-only | current | Line Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.79.2.3.2.104.1.17 | Columnpme1008AlmLineRxPwrHighAlaPortn | read-only | current | Line Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.79.2.3.2.120 | Tablepme1008AlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pme1008AlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1 | Rowpme1008AlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pme1008AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.1 | Columnpme1008AlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pme1008AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.2 | Columnpme1008AlmLineTxPwLowWngPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.3 | Columnpme1008AlmLineTxPwrHighWngPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.4 | Columnpme1008AlmLineTxBiasLowWngPortn | read-only | current | Line Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.5 | Columnpme1008AlmLineTxBiasHighWngPortn | read-only | current | Line Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.6 | Columnpme1008AlmLineVccLowWngPortn | read-only | current | Line Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.7 | Columnpme1008AlmLineVccHighWngPortn | read-only | current | Line Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.8 | Columnpme1008AlmLineTempLowWngPortn | read-only | current | Line Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicat… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.9 | Columnpme1008AlmLineTempHighWngPortn | read-only | current | Line Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.16 | Columnpme1008AlmLineRxPwrLowWngPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.79.2.3.2.120.1.17 | Columnpme1008AlmLineRxPwrHighWngPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.79.2.3.2.152 | Tablepme1008AlmlineHostLaneFaultTable | not-accessible | current | List of pme1008AlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.79.2.3.2.152.1 | Rowpme1008AlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pme1008AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.79.2.3.2.152.1.1 | Columnpme1008AlmlineHostLaneFaultIndex | read-only | current | Index definition for the pme1008AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.79.2.3.2.152.1.2 | Columnpme1008AlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv<Help> This alarm indicates if an Optical Path Break has been detec… |
| 1.3.6.1.4.1.20044.79.2.3.2.152.1.3 | Columnpme1008AlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal<Help> This alarm indicates if a Loss Of Frame has been detected … |
| 1.3.6.1.4.1.20044.79.2.3.3 | Nodepme1008AlmLineCrit | |||
| 1.3.6.1.4.1.20044.79.2.3.3.24 | Tablepme1008AlmsynthAlmLineTable | not-accessible | current | List of pme1008AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1 | Rowpme1008AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pme1008AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.1 | Columnpme1008AlmsynthAlmLineIndex | read-only | current | Index definition for the pme1008AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.2 | Columnpme1008AlmLineSfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.3 | Columnpme1008AlmLineDdmAbsentPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.5 | Columnpme1008AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.6 | Columnpme1008AlmLineTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shu… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.7 | Columnpme1008AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.9 | Columnpme1008AlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.10 | Columnpme1008AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.11 | Columnpme1008AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.79.2.3.3.24.1.13 | Columnpme1008AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.79.3 | Nodepme1008measures | |||
| 1.3.6.1.4.1.20044.79.3.1 | Nodepme1008MesrOther | |||
| 1.3.6.1.4.1.20044.79.3.2 | Nodepme1008MesrClient | |||
| 1.3.6.1.4.1.20044.79.3.2.16 | Tablepme1008MesrclientTempTable | not-accessible | current | List of pme1008MesrclientTemp Article |
| 1.3.6.1.4.1.20044.79.3.2.16.1 | Rowpme1008MesrclientTempEntry | not-accessible | current | Row definition for the pme1008MesrclientTemp table |
| 1.3.6.1.4.1.20044.79.3.2.16.1.1 | Columnpme1008MesrclientTempIndex | read-only | current | Index definition for the pme1008MesrclientTemp table |
| 1.3.6.1.4.1.20044.79.3.2.16.1.2 | Columnpme1008MesrclientTempPortn | read-only | current | Client SFP Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = … |
| 1.3.6.1.4.1.20044.79.3.2.32 | Tablepme1008MesrclientTxBiasTable | not-accessible | current | List of pme1008MesrclientTxBias Article |
| 1.3.6.1.4.1.20044.79.3.2.32.1 | Rowpme1008MesrclientTxBiasEntry | not-accessible | current | Row definition for the pme1008MesrclientTxBias table |
| 1.3.6.1.4.1.20044.79.3.2.32.1.1 | Columnpme1008MesrclientTxBiasIndex | read-only | current | Index definition for the pme1008MesrclientTxBias table |
| 1.3.6.1.4.1.20044.79.3.2.32.1.2 | Columnpme1008MesrclientTxBiasPortn | read-only | current | Client SFP Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit =… |
| 1.3.6.1.4.1.20044.79.3.2.48 | Tablepme1008MesrclientTxPwrTable | not-accessible | current | List of pme1008MesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.79.3.2.48.1 | Rowpme1008MesrclientTxPwrEntry | not-accessible | current | Row definition for the pme1008MesrclientTxPwr table |
| 1.3.6.1.4.1.20044.79.3.2.48.1.1 | Columnpme1008MesrclientTxPwrIndex | read-only | current | Index definition for the pme1008MesrclientTxPwr table |
| 1.3.6.1.4.1.20044.79.3.2.48.1.2 | Columnpme1008MesrclientTxPwrPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-4… |
| 1.3.6.1.4.1.20044.79.3.2.64 | Tablepme1008MesrclientRxPwrTable | not-accessible | current | List of pme1008MesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.79.3.2.64.1 | Rowpme1008MesrclientRxPwrEntry | not-accessible | current | Row definition for the pme1008MesrclientRxPwr table |
| 1.3.6.1.4.1.20044.79.3.2.64.1.1 | Columnpme1008MesrclientRxPwrIndex | read-only | current | Index definition for the pme1008MesrclientRxPwr table |
| 1.3.6.1.4.1.20044.79.3.2.64.1.2 | Columnpme1008MesrclientRxPwrPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) … |
| 1.3.6.1.4.1.20044.79.3.3 | Nodepme1008MesrLine | |||
| 1.3.6.1.4.1.20044.79.3.3.80 | Tablepme1008MesrlineTxPwrTable | not-accessible | current | List of pme1008MesrlineTxPwr Article |
| 1.3.6.1.4.1.20044.79.3.3.80.1 | Rowpme1008MesrlineTxPwrEntry | not-accessible | current | Row definition for the pme1008MesrlineTxPwr table |
| 1.3.6.1.4.1.20044.79.3.3.80.1.1 | Columnpme1008MesrlineTxPwrIndex | read-only | current | Index definition for the pme1008MesrlineTxPwr table |
| 1.3.6.1.4.1.20044.79.3.3.80.1.2 | Columnpme1008MesrlineTxPwrPortn | read-only | current | Line Optical Module Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power … |
| 1.3.6.1.4.1.20044.79.3.3.96 | Tablepme1008MesrlineTempTable | not-accessible | current | List of pme1008MesrlineTemp Article |
| 1.3.6.1.4.1.20044.79.3.3.96.1 | Rowpme1008MesrlineTempEntry | not-accessible | current | Row definition for the pme1008MesrlineTemp table |
| 1.3.6.1.4.1.20044.79.3.3.96.1.1 | Columnpme1008MesrlineTempIndex | read-only | current | Index definition for the pme1008MesrlineTemp table |
| 1.3.6.1.4.1.20044.79.3.3.96.1.2 | Columnpme1008MesrlineTempPortn | read-only | current | Line Optical Module Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temp… |
| 1.3.6.1.4.1.20044.79.3.3.112 | Tablepme1008MesrlineTxBiasTable | not-accessible | current | List of pme1008MesrlineTxBias Article |
| 1.3.6.1.4.1.20044.79.3.3.112.1 | Rowpme1008MesrlineTxBiasEntry | not-accessible | current | Row definition for the pme1008MesrlineTxBias table |
| 1.3.6.1.4.1.20044.79.3.3.112.1.1 | Columnpme1008MesrlineTxBiasIndex | read-only | current | Index definition for the pme1008MesrlineTxBias table |
| 1.3.6.1.4.1.20044.79.3.3.112.1.2 | Columnpme1008MesrlineTxBiasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/50… |
| 1.3.6.1.4.1.20044.79.3.3.128 | Tablepme1008MesrlineRxPwrTable | not-accessible | current | List of pme1008MesrlineRxPwr Article |
| 1.3.6.1.4.1.20044.79.3.3.128.1 | Rowpme1008MesrlineRxPwrEntry | not-accessible | current | Row definition for the pme1008MesrlineRxPwr table |
| 1.3.6.1.4.1.20044.79.3.3.128.1.1 | Columnpme1008MesrlineRxPwrIndex | read-only | current | Index definition for the pme1008MesrlineRxPwr table |
| 1.3.6.1.4.1.20044.79.3.3.128.1.2 | Columnpme1008MesrlineRxPwrPortn | read-only | current | Line Optical Module Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(A… |
| 1.3.6.1.4.1.20044.79.4 | Nodepme1008counters | |||
| 1.3.6.1.4.1.20044.79.4.1 | Nodepme1008CntOther | |||
| 1.3.6.1.4.1.20044.79.4.2 | Nodepme1008CntClient | |||
| 1.3.6.1.4.1.20044.79.4.2.96 | Tablepme1008CntclientCbipCounterTable | not-accessible | current | List of pme1008CntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.79.4.2.96.1 | Rowpme1008CntclientCbipCounterEntry | not-accessible | current | Row definition for the pme1008CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.79.4.2.96.1.1 | Columnpme1008CntclientCbipCounterIndex | read-only | current | Index definition for the pme1008CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.79.4.2.96.1.2 | Columnpme1008CntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a BIP error is detected on the Client path <Help> This counter gives the number of CBIP errors on t… |
| 1.3.6.1.4.1.20044.79.4.2.96.1.3 | Columnpme1008CntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.79.4.2.96.1.4 | Columnpme1008CntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.79.4.3 | Nodepme1008CntLine | |||
| 1.3.6.1.4.1.20044.79.4.3.192 | Tablepme1008CntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pme1008CntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.79.4.3.192.1 | Rowpme1008CntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pme1008CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.79.4.3.192.1.1 | Columnpme1008CntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pme1008CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.79.4.3.192.1.2 | Columnpme1008CntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line Input FCS Errors :This counter is increased each time a FCS error is detected on the line input stream <Help> This counter gives the number of FCS errors … |
| 1.3.6.1.4.1.20044.79.4.3.192.1.3 | Columnpme1008CntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.79.4.3.192.1.4 | Columnpme1008CntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.79.4.3.216 | Tablepme1008CntlineDfrmTimCntTable | not-accessible | current | List of pme1008CntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.79.4.3.216.1 | Rowpme1008CntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pme1008CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.79.4.3.216.1.1 | Columnpme1008CntlineDfrmTimCntIndex | read-only | current | Index definition for the pme1008CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.79.4.3.216.1.2 | Columnpme1008CntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.79.4.3.216.1.3 | Columnpme1008CntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.79.4.3.216.1.4 | Columnpme1008CntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.79.4.259 | Scalarpme1008CntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.79.4.260 | Scalarpme1008CntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.79.6 | Nodepme1008controlsWrite | |||
| 1.3.6.1.4.1.20044.79.6.1 | Nodepme1008CtrlOther | |||
| 1.3.6.1.4.1.20044.79.6.1.1 | Nodepme1008CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.79.6.1.1.1 | Scalarpme1008CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.79.6.1.1.2 | Scalarpme1008CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.79.6.1.1.10 | Scalarpme1008CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.79.6.1.1.14 | Scalarpme1008CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.79.6.1.4 | Nodepme1008Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.79.6.1.4.1 | Scalarpme1008CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.79.6.1.4.2 | Scalarpme1008CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.79.6.1.5 | Nodepme1008CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.79.6.1.5.2 | Scalarpme1008CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.79.6.1.5.3 | Scalarpme1008CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.79.6.1.5.5 | Scalarpme1008CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.79.6.1.5.6 | Scalarpme1008CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.79.6.1.6 | Nodepme1008CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.79.6.1.6.1 | Scalarpme1008CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.79.6.1.6.5 | Scalarpme1008CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.79.6.1.6.6 | Scalarpme1008CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.79.6.1.6.7 | Scalarpme1008CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.79.6.1.6.8 | Scalarpme1008CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.79.6.1.192 | Nodepme1008CtrlledTest | |||
| 1.3.6.1.4.1.20044.79.6.1.192.1 | Scalarpme1008CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.79.6.1.192.2 | Scalarpme1008CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.79.6.1.192.3 | Scalarpme1008CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.79.6.2 | Nodepme1008CtrlClient | |||
| 1.3.6.1.4.1.20044.79.6.2.16 | Tablepme1008CtrlaccessLoopTable | not-accessible | current | List of pme1008CtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.79.6.2.16.1 | Rowpme1008CtrlaccessLoopEntry | not-accessible | current | Row definition for the pme1008CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.79.6.2.16.1.1 | Columnpme1008CtrlaccessLoopIndex | read-only | current | Index definition for the pme1008CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.79.6.2.16.1.2 | Columnpme1008CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.79.6.2.17 | Tablepme1008CtrlclientLoopToLineTable | not-accessible | current | List of pme1008CtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.79.6.2.17.1 | Rowpme1008CtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pme1008CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.79.6.2.17.1.1 | Columnpme1008CtrlclientLoopToLineIndex | read-only | current | Index definition for the pme1008CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.79.6.2.17.1.2 | Columnpme1008CtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.79.6.2.21 | Tablepme1008CtrlcsfUpInsTable | not-accessible | current | List of pme1008CtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.79.6.2.21.1 | Rowpme1008CtrlcsfUpInsEntry | not-accessible | current | Row definition for the pme1008CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.79.6.2.21.1.1 | Columnpme1008CtrlcsfUpInsIndex | read-only | current | Index definition for the pme1008CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.79.6.2.21.1.2 | Columnpme1008CtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.79.6.2.22 | Tablepme1008CtrlcaisDwInsTable | not-accessible | current | List of pme1008CtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.79.6.2.22.1 | Rowpme1008CtrlcaisDwInsEntry | not-accessible | current | Row definition for the pme1008CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.79.6.2.22.1.1 | Columnpme1008CtrlcaisDwInsIndex | read-only | current | Index definition for the pme1008CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.79.6.2.22.1.2 | Columnpme1008CtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.79.6.2.23 | Tablepme1008CtrlclientOciTable | not-accessible | current | List of pme1008CtrlclientOci Article |
| 1.3.6.1.4.1.20044.79.6.2.23.1 | Rowpme1008CtrlclientOciEntry | not-accessible | current | Row definition for the pme1008CtrlclientOci table |
| 1.3.6.1.4.1.20044.79.6.2.23.1.1 | Columnpme1008CtrlclientOciIndex | read-only | current | Index definition for the pme1008CtrlclientOci table |
| 1.3.6.1.4.1.20044.79.6.2.23.1.2 | Columnpme1008CtrlclientOciPortn | read-write | current | ODU2e-OCI :Label <Help> This control inserts a Client OCI |
| 1.3.6.1.4.1.20044.79.6.2.24 | Tablepme1008CtrlclientLckTable | not-accessible | current | List of pme1008CtrlclientLck Article |
| 1.3.6.1.4.1.20044.79.6.2.24.1 | Rowpme1008CtrlclientLckEntry | not-accessible | current | Row definition for the pme1008CtrlclientLck table |
| 1.3.6.1.4.1.20044.79.6.2.24.1.1 | Columnpme1008CtrlclientLckIndex | read-only | current | Index definition for the pme1008CtrlclientLck table |
| 1.3.6.1.4.1.20044.79.6.2.24.1.2 | Columnpme1008CtrlclientLckPortn | read-write | current | ODU2e-LCK :Label <Help> This control inserts a Client LCK |
| 1.3.6.1.4.1.20044.79.6.2.25 | Tablepme1008CtrlclientAisTable | not-accessible | current | List of pme1008CtrlclientAis Article |
| 1.3.6.1.4.1.20044.79.6.2.25.1 | Rowpme1008CtrlclientAisEntry | not-accessible | current | Row definition for the pme1008CtrlclientAis table |
| 1.3.6.1.4.1.20044.79.6.2.25.1.1 | Columnpme1008CtrlclientAisIndex | read-only | current | Index definition for the pme1008CtrlclientAis table |
| 1.3.6.1.4.1.20044.79.6.2.25.1.2 | Columnpme1008CtrlclientAisPortn | read-write | current | ODU2e-AIS :Label <Help> This control inserts a Client AIS |
| 1.3.6.1.4.1.20044.79.6.2.26 | Tablepme1008CtrlclientBdiTable | not-accessible | current | List of pme1008CtrlclientBdi Article |
| 1.3.6.1.4.1.20044.79.6.2.26.1 | Rowpme1008CtrlclientBdiEntry | not-accessible | current | Row definition for the pme1008CtrlclientBdi table |
| 1.3.6.1.4.1.20044.79.6.2.26.1.1 | Columnpme1008CtrlclientBdiIndex | read-only | current | Index definition for the pme1008CtrlclientBdi table |
| 1.3.6.1.4.1.20044.79.6.2.26.1.2 | Columnpme1008CtrlclientBdiPortn | read-write | current | ODU2e-BDI :Label <Help> This control inserts a Client BDI |
| 1.3.6.1.4.1.20044.79.6.3 | Nodepme1008CtrlLine | |||
| 1.3.6.1.4.1.20044.79.6.3.64 | Tablepme1008CtrlcommAccessLoopTable | not-accessible | current | List of pme1008CtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.79.6.3.64.1 | Rowpme1008CtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pme1008CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.79.6.3.64.1.1 | Columnpme1008CtrlcommAccessLoopIndex | read-only | current | Index definition for the pme1008CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.79.6.3.64.1.2 | Columnpme1008CtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This cont… |
| 1.3.6.1.4.1.20044.79.6.3.66 | Tablepme1008CtrllineLoopTable | not-accessible | current | List of pme1008CtrllineLoop Article |
| 1.3.6.1.4.1.20044.79.6.3.66.1 | Rowpme1008CtrllineLoopEntry | not-accessible | current | Row definition for the pme1008CtrllineLoop table |
| 1.3.6.1.4.1.20044.79.6.3.66.1.1 | Columnpme1008CtrllineLoopIndex | read-only | current | Index definition for the pme1008CtrllineLoop table |
| 1.3.6.1.4.1.20044.79.6.3.66.1.2 | Columnpme1008CtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. Th… |
| 1.3.6.1.4.1.20044.79.6.3.69 | Tablepme1008CtrlfecDisableTable | not-accessible | current | List of pme1008CtrlfecDisable Article |
| 1.3.6.1.4.1.20044.79.6.3.69.1 | Rowpme1008CtrlfecDisableEntry | not-accessible | current | Row definition for the pme1008CtrlfecDisable table |
| 1.3.6.1.4.1.20044.79.6.3.69.1.1 | Columnpme1008CtrlfecDisableIndex | read-only | current | Index definition for the pme1008CtrlfecDisable table |
| 1.3.6.1.4.1.20044.79.6.3.69.1.2 | Columnpme1008CtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.79.6.3.70 | Tablepme1008CtrllineBdiTable | not-accessible | current | List of pme1008CtrllineBdi Article |
| 1.3.6.1.4.1.20044.79.6.3.70.1 | Rowpme1008CtrllineBdiEntry | not-accessible | current | Row definition for the pme1008CtrllineBdi table |
| 1.3.6.1.4.1.20044.79.6.3.70.1.1 | Columnpme1008CtrllineBdiIndex | read-only | current | Index definition for the pme1008CtrllineBdi table |
| 1.3.6.1.4.1.20044.79.6.3.70.1.2 | Columnpme1008CtrllineBdiPortn | read-write | current | OTU2e-BDI :Label <Help> This control inserts a Line BDI |
| 1.3.6.1.4.1.20044.79.7 | Nodepme1008ri | |||
| 1.3.6.1.4.1.20044.79.7.1 | Nodepme1008riTable | |||
| 1.3.6.1.4.1.20044.79.7.1.1 | Tablepme1008RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.79.7.1.1.1 | Rowpme1008RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.79.7.1.1.1.1 | Columnpme1008RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.79.7.1.1.1.2 | Columnpme1008Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.79.7.1.2 | Tablepme1008RinvLineTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.79.7.1.2.1 | Rowpme1008RinvLineEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.79.7.1.2.1.1 | Columnpme1008RinvLineIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.79.7.1.2.1.2 | Columnpme1008RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.79.7.2 | Scalarpme1008RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.79.7.3 | Scalarpme1008RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.79.7.4 | Scalarpme1008RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.79.7.5 | Scalarpme1008RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.79.7.6 | Scalarpme1008RinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.79.8 | Nodepme1008download | |||
| 1.3.6.1.4.1.20044.79.8.1 | Nodepme1008DwlOther | |||
| 1.3.6.1.4.1.20044.79.8.1.0 | Nodepme1008DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.79.8.1.0.1 | Scalarpme1008DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.79.8.1.0.2 | Scalarpme1008DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.79.8.1.1 | Nodepme1008DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.79.8.1.1.1 | Scalarpme1008DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.79.8.1.1.2 | Scalarpme1008DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.79.8.1.1.5 | Scalarpme1008DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.79.8.1.1.6 | Scalarpme1008DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.79.8.1.2 | Nodepme1008DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.79.8.1.2.1 | Scalarpme1008DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.79.8.1.2.2 | Scalarpme1008DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.79.8.1.2.3 | Scalarpme1008DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.79.8.1.2.4 | Scalarpme1008DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.79.8.1.2.5 | Scalarpme1008DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.79.8.1.2.6 | Scalarpme1008DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.79.8.1.2.7 | Scalarpme1008DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.79.8.1.2.8 | Scalarpme1008DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.79.8.2 | Nodepme1008DwlClient | |||
| 1.3.6.1.4.1.20044.79.8.3 | Nodepme1008DwlLine | |||
| 1.3.6.1.4.1.20044.79.9 | Nodepme1008Config | |||
| 1.3.6.1.4.1.20044.79.9.1 | Nodepme1008CfgStartup | |||
| 1.3.6.1.4.1.20044.79.9.1.1 | Tablepme1008CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.1.1.1 | Rowpme1008CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.79.9.1.1.1.1 | Columnpme1008CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.79.9.1.1.1.3 | Columnpme1008CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.79.9.1.1.1.4 | Columnpme1008CfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.79.9.1.1.1.14 | Columnpme1008CfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.79.9.1.2 | Tablepme1008CfgLinexr1StartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.1.2.1 | Rowpme1008CfgLinexr1StartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.79.9.1.2.1.1 | Columnpme1008CfgLinexr1StartupIndex | read-only | current | Index definition for the linexr1Startup table |
| 1.3.6.1.4.1.20044.79.9.1.2.1.3 | Columnpme1008CfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.79.9.1.2.1.14 | Columnpme1008CfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.79.9.1.3 | Tablepme1008CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.1.3.1 | Rowpme1008CfgOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.79.9.1.3.1.1 | Columnpme1008CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.79.9.1.3.1.3 | Columnpme1008CfgLineControlsPortn | read-write | deprecated | Default Line settings :This register configures the start-up settings on the ports |
| 1.3.6.1.4.1.20044.79.9.1.3.1.6 | Columnpme1008CfgLinePwrLaserPortn | read-write | current | Default Line output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.79.9.1.3.1.7 | Columnpme1008CfgLineFCurrentPortn | read-write | current | Default Line transceiver Channel :This register configures the start-up laser channel of the client transceiver |
| 1.3.6.1.4.1.20044.79.9.1.3.1.8 | Columnpme1008CfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the client transceiver |
| 1.3.6.1.4.1.20044.79.9.1.3.1.9 | Columnpme1008CfgLineFoPortn | read-write | current | Default Line first Frequency :This register configures the start-up first frequency of the client transceiver |
| 1.3.6.1.4.1.20044.79.9.2 | Nodepme1008CfgLabels | |||
| 1.3.6.1.4.1.20044.79.9.2.1 | Tablepme1008CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.2.1.1 | Rowpme1008CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.79.9.2.1.1.1 | Columnpme1008CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.79.9.2.1.1.3 | Columnpme1008CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.79.9.2.2 | Tablepme1008CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.2.2.1 | Rowpme1008CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.79.9.2.2.1.1 | Columnpme1008CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.79.9.2.2.1.3 | Columnpme1008CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.79.9.3 | Nodepme1008CfgOther | |||
| 1.3.6.1.4.1.20044.79.9.3.1 | Nodepme1008tablemoduleOther | |||
| 1.3.6.1.4.1.20044.79.9.3.1.2 | Scalarpme1008Cfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.79.9.4 | Nodepme1008CfgOdu2Clienta | |||
| 1.3.6.1.4.1.20044.79.9.4.1 | Tablepme1008CfgClientStartupOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.4.1.1 | Rowpme1008CfgClientStartupOduEntry | not-accessible | current | Row definition for the odu2Clienta table |
| 1.3.6.1.4.1.20044.79.9.4.1.1.1 | Columnpme1008CfgClientStartupOduIndex | read-only | current | Index definition for the clientStartupOdu table |
| 1.3.6.1.4.1.20044.79.9.4.1.1.3 | Columnpme1008CfgOdu2ReserveLsbPortn | read-write | current | : |
| 1.3.6.1.4.1.20044.79.9.4.1.1.4 | Columnpme1008CfgOdu2DegthresholdPortn | read-write | current | ODU2 Degrade Threshold : |
| 1.3.6.1.4.1.20044.79.9.4.1.1.5 | Columnpme1008CfgOdu2DegmPortn | read-write | current | ODU2 Degrade Confirmation : |
| 1.3.6.1.4.1.20044.79.9.4.1.1.6 | Columnpme1008CfgOdu2SettingsPortn | read-write | current | ODU2 Settings : |
| 1.3.6.1.4.1.20044.79.9.5 | Nodepme1008CfgOtu2Line | |||
| 1.3.6.1.4.1.20044.79.9.5.1 | Tablepme1008CfgLinexStartupOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.5.1.1 | Rowpme1008CfgLinexStartupOtuEntry | not-accessible | current | Row definition for the otu2Line table |
| 1.3.6.1.4.1.20044.79.9.5.1.1.1 | Columnpme1008CfgLinexStartupOtuIndex | read-only | current | Index definition for the linexStartupOtu table |
| 1.3.6.1.4.1.20044.79.9.5.1.1.3 | Columnpme1008CfgOtu2ReserveMsbPortn | read-write | current | : |
| 1.3.6.1.4.1.20044.79.9.5.1.1.4 | Columnpme1008CfgOtu2DegthresholdPortn | read-write | current | OTU2 Degrade Threshold : |
| 1.3.6.1.4.1.20044.79.9.5.1.1.5 | Columnpme1008CfgOtu2DegmPortn | read-write | current | OTU2 Degrade Confirmation : |
| 1.3.6.1.4.1.20044.79.9.5.1.1.6 | Columnpme1008CfgOtu2SettingsPortn | read-write | current | OTU2 Settings : |
| 1.3.6.1.4.1.20044.79.9.6 | Nodepme1008CfgSapiTxClient | |||
| 1.3.6.1.4.1.20044.79.9.6.1 | Tablepme1008CfgClientSapiTxOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.6.1.1 | Rowpme1008CfgClientSapiTxOduEntry | not-accessible | current | Row definition for the sapiTxClient table |
| 1.3.6.1.4.1.20044.79.9.6.1.1.1 | Columnpme1008CfgClientSapiTxOduIndex | read-only | current | Index definition for the clientSapiTxOdu table |
| 1.3.6.1.4.1.20044.79.9.6.1.1.3 | Columnpme1008CfgClientSapiTxSetupPortn | read-write | current | Client Transmitted SAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.79.9.7 | Nodepme1008CfgSapiExpClient | |||
| 1.3.6.1.4.1.20044.79.9.7.1 | Tablepme1008CfgClientSapiExpOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.7.1.1 | Rowpme1008CfgClientSapiExpOduEntry | not-accessible | current | Row definition for the sapiExpClient table |
| 1.3.6.1.4.1.20044.79.9.7.1.1.1 | Columnpme1008CfgClientSapiExpOduIndex | read-only | current | Index definition for the clientSapiExpOdu table |
| 1.3.6.1.4.1.20044.79.9.7.1.1.3 | Columnpme1008CfgClientSapiExpSetupPortn | read-write | current | Client Expected SAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.8 | Nodepme1008CfgSapiAccClient | |||
| 1.3.6.1.4.1.20044.79.9.8.1 | Tablepme1008CfgClientSapiAccOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.8.1.1 | Rowpme1008CfgClientSapiAccOduEntry | not-accessible | current | Row definition for the sapiAccClient table |
| 1.3.6.1.4.1.20044.79.9.8.1.1.1 | Columnpme1008CfgClientSapiAccOduIndex | read-only | current | Index definition for the clientSapiAccOdu table |
| 1.3.6.1.4.1.20044.79.9.8.1.1.3 | Columnpme1008CfgClientSapiAccSetupPortn | read-write | deprecated | Client Accepted SAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.9 | Nodepme1008CfgDapiTxClient | |||
| 1.3.6.1.4.1.20044.79.9.9.1 | Tablepme1008CfgClientDapiTxOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.9.1.1 | Rowpme1008CfgClientDapiTxOduEntry | not-accessible | current | Row definition for the dapiTxClient table |
| 1.3.6.1.4.1.20044.79.9.9.1.1.1 | Columnpme1008CfgClientDapiTxOduIndex | read-only | current | Index definition for the clientDapiTxOdu table |
| 1.3.6.1.4.1.20044.79.9.9.1.1.3 | Columnpme1008CfgClientDapiTxSetupPortn | read-write | current | Client Transmitted DAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.79.9.10 | Nodepme1008CfgDapiExpClient | |||
| 1.3.6.1.4.1.20044.79.9.10.1 | Tablepme1008CfgClientDapiExpOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.10.1.1 | Rowpme1008CfgClientDapiExpOduEntry | not-accessible | current | Row definition for the dapiExpClient table |
| 1.3.6.1.4.1.20044.79.9.10.1.1.1 | Columnpme1008CfgClientDapiExpOduIndex | read-only | current | Index definition for the clientDapiExpOdu table |
| 1.3.6.1.4.1.20044.79.9.10.1.1.3 | Columnpme1008CfgClientDapiExpSetupPortn | read-write | current | Client Expected DAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.11 | Nodepme1008CfgDapiAccClient | |||
| 1.3.6.1.4.1.20044.79.9.11.1 | Tablepme1008CfgClientDapiAccOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.11.1.1 | Rowpme1008CfgClientDapiAccOduEntry | not-accessible | current | Row definition for the dapiAccClient table |
| 1.3.6.1.4.1.20044.79.9.11.1.1.1 | Columnpme1008CfgClientDapiAccOduIndex | read-only | current | Index definition for the clientDapiAccOdu table |
| 1.3.6.1.4.1.20044.79.9.11.1.1.3 | Columnpme1008CfgClientDapiAccSetupPortn | read-write | deprecated | Client Accepted DAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.12 | Nodepme1008CfgSapiTxLine | |||
| 1.3.6.1.4.1.20044.79.9.12.1 | Tablepme1008CfgLineSapiTxOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.12.1.1 | Rowpme1008CfgLineSapiTxOtuEntry | not-accessible | current | Row definition for the sapiTxLine table |
| 1.3.6.1.4.1.20044.79.9.12.1.1.1 | Columnpme1008CfgLineSapiTxOtuIndex | read-only | current | Index definition for the lineSapiTxOtu table |
| 1.3.6.1.4.1.20044.79.9.12.1.1.3 | Columnpme1008CfgLineSapiTxSetupPortn | read-write | current | Line Transmitted SAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.79.9.13 | Nodepme1008CfgSapiExpLine | |||
| 1.3.6.1.4.1.20044.79.9.13.1 | Tablepme1008CfgLineSapiExpOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.13.1.1 | Rowpme1008CfgLineSapiExpOtuEntry | not-accessible | current | Row definition for the sapiExpLine table |
| 1.3.6.1.4.1.20044.79.9.13.1.1.1 | Columnpme1008CfgLineSapiExpOtuIndex | read-only | current | Index definition for the lineSapiExpOtu table |
| 1.3.6.1.4.1.20044.79.9.13.1.1.3 | Columnpme1008CfgLineSapiExpSetupPortn | read-write | current | Line Expected SAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.14 | Nodepme1008CfgSapiAccLine | |||
| 1.3.6.1.4.1.20044.79.9.14.1 | Tablepme1008CfgLineSapiAccOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.14.1.1 | Rowpme1008CfgLineSapiAccOtuEntry | not-accessible | current | Row definition for the sapiAccLine table |
| 1.3.6.1.4.1.20044.79.9.14.1.1.1 | Columnpme1008CfgLineSapiAccOtuIndex | read-only | current | Index definition for the lineSapiAccOtu table |
| 1.3.6.1.4.1.20044.79.9.14.1.1.3 | Columnpme1008CfgLineSapiAccSetupPortn | read-write | deprecated | Line Accepted SAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.15 | Nodepme1008CfgDapiTxLine | |||
| 1.3.6.1.4.1.20044.79.9.15.1 | Tablepme1008CfgLineDapiTxOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.15.1.1 | Rowpme1008CfgLineDapiTxOtuEntry | not-accessible | current | Row definition for the dapiTxLine table |
| 1.3.6.1.4.1.20044.79.9.15.1.1.1 | Columnpme1008CfgLineDapiTxOtuIndex | read-only | current | Index definition for the lineDapiTxOtu table |
| 1.3.6.1.4.1.20044.79.9.15.1.1.3 | Columnpme1008CfgLineDapiTxSetupPortn | read-write | current | Line Transmitted DAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.79.9.16 | Nodepme1008CfgDapiExpLine | |||
| 1.3.6.1.4.1.20044.79.9.16.1 | Tablepme1008CfgLineDapiExpOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.16.1.1 | Rowpme1008CfgLineDapiExpOtuEntry | not-accessible | current | Row definition for the dapiExpLine table |
| 1.3.6.1.4.1.20044.79.9.16.1.1.1 | Columnpme1008CfgLineDapiExpOtuIndex | read-only | current | Index definition for the lineDapiExpOtu table |
| 1.3.6.1.4.1.20044.79.9.16.1.1.3 | Columnpme1008CfgLineDapiExpSetupPortn | read-write | current | Line Expected DAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.17 | Nodepme1008CfgDapiAccLine | |||
| 1.3.6.1.4.1.20044.79.9.17.1 | Tablepme1008CfgLineDapiAccOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.17.1.1 | Rowpme1008CfgLineDapiAccOtuEntry | not-accessible | current | Row definition for the dapiAccLine table |
| 1.3.6.1.4.1.20044.79.9.17.1.1.1 | Columnpme1008CfgLineDapiAccOtuIndex | read-only | current | Index definition for the lineDapiAccOtu table |
| 1.3.6.1.4.1.20044.79.9.17.1.1.3 | Columnpme1008CfgLineDapiAccSetupPortn | read-write | deprecated | Line Accepted DAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.79.9.18 | Nodepme1008CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.79.9.18.1 | Tablepme1008CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.79.9.18.1.1 | Rowpme1008CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.79.9.18.1.1.1 | Columnpme1008CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.79.9.18.1.1.3 | Columnpme1008CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.79.9.18.1.1.4 | Columnpme1008CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.79.9.18.1.1.5 | Columnpme1008CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.79.9.18.1.1.6 | Columnpme1008CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.79.9.18.1.1.7 | Columnpme1008CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.79.9.257 | Scalarpme1008CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.79.10 | Nodepme1008traps | |||
| 1.3.6.1.4.1.20044.79.10.2 | Scalarpme1008trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.79.10.3 | Scalarpme1008trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.79.10.4 | Scalarpme1008trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.79.10.30 | Notificationpme1008LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.79.10.31 | Notificationpme1008LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.79.10.32 | Notificationpme1008LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.79.10.33 | Notificationpme1008LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.79.10.34 | Notificationpme1008LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.79.10.35 | Notificationpme1008LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.79.10.40 | Notificationpme1008ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.79.10.41 | Notificationpme1008ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.79.10.42 | Notificationpme1008ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.79.10.43 | Notificationpme1008ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.79.10.44 | Notificationpme1008ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.79.10.45 | Notificationpme1008ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.79.10.50 | Notificationpme1008PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.79.10.51 | Notificationpme1008PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.79.11 | Nodepme1008Monitoring | |||
| 1.3.6.1.4.1.20044.79.11.1 | Nodepme1008MonOther | |||
| 1.3.6.1.4.1.20044.79.11.1.3 | Nodepme1008MonRmon | |||
| 1.3.6.1.4.1.20044.79.11.1.3.359 | Scalarpme1008MonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.79.11.1.3.360 | Scalarpme1008MonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.79.11.2 | Nodepme1008MonClient | |||
| 1.3.6.1.4.1.20044.79.11.2.4 | Nodepme1008MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.79.11.2.4.16 | Tablepme1008MonupRmonBytesCounterClientInputTable | not-accessible | current | List of pme1008MonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.16.1 | Rowpme1008MonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pme1008MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.16.1.1 | Columnpme1008MonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pme1008MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.16.1.2 | Columnpme1008MonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.79.11.2.4.16.1.3 | Columnpme1008MonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.16.1.4 | Columnpme1008MonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.32 | Tablepme1008MonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pme1008MonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.32.1 | Rowpme1008MonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pme1008MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.32.1.1 | Columnpme1008MonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pme1008MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.32.1.2 | Columnpme1008MonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a B1/FCS error is detected on the client port <Help> This counter gives the number of B1/FCS Error… |
| 1.3.6.1.4.1.20044.79.11.2.4.32.1.3 | Columnpme1008MonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.32.1.4 | Columnpme1008MonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.48 | Tablepme1008MonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pme1008MonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.48.1 | Rowpme1008MonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pme1008MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.48.1.1 | Columnpme1008MonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pme1008MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.48.1.2 | Columnpme1008MonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.79.11.2.4.48.1.3 | Columnpme1008MonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.48.1.4 | Columnpme1008MonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.64 | Tablepme1008MonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pme1008MonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.64.1 | Rowpme1008MonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pme1008MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.64.1.1 | Columnpme1008MonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pme1008MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.64.1.2 | Columnpme1008MonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.79.11.2.4.64.1.3 | Columnpme1008MonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.64.1.4 | Columnpme1008MonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.80 | Tablepme1008MonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pme1008MonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.80.1 | Rowpme1008MonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pme1008MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.80.1.1 | Columnpme1008MonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pme1008MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.80.1.2 | Columnpme1008MonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.79.11.2.4.80.1.3 | Columnpme1008MonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.80.1.4 | Columnpme1008MonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.96 | Tablepme1008MonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pme1008MonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.96.1 | Rowpme1008MonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pme1008MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.96.1.1 | Columnpme1008MonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pme1008MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.79.11.2.4.96.1.2 | Columnpme1008MonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.79.11.2.4.96.1.3 | Columnpme1008MonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.96.1.4 | Columnpme1008MonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.224 | Tablepme1008MondwRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pme1008MondwRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.224.1 | Rowpme1008MondwRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pme1008MondwRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.79.11.2.4.224.1.1 | Columnpme1008MondwRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pme1008MondwRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.79.11.2.4.224.1.2 | Columnpme1008MondwRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the output client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.79.11.2.4.224.1.3 | Columnpme1008MondwRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | Output B1/FCS Errors Counter Error :This OID when set indicates the output B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.224.1.4 | Columnpme1008MondwRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | Output B1/FCS Errors Counter Overload :This OID when set indicates an output B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.240 | Tablepme1008MondwRmonPacketsCounterClientOutputTable | not-accessible | current | List of pme1008MondwRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.79.11.2.4.240.1 | Rowpme1008MondwRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pme1008MondwRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.79.11.2.4.240.1.1 | Columnpme1008MondwRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pme1008MondwRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.79.11.2.4.240.1.2 | Columnpme1008MondwRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packets detected… |
| 1.3.6.1.4.1.20044.79.11.2.4.240.1.3 | Columnpme1008MondwRmonPacketsCounterClientOutputErrorPortn | read-only | current | Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.79.11.2.4.240.1.4 | Columnpme1008MondwRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pme1008ClientProtocol | INTEGER { protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue6(6), protocolclientvalue7(7) } | current | Different values on the protocol on the client ports |
| Pme1008DccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pme1008LineChannel | INTEGER | current | Channel selection on transceiver Line ports |
| Pme1008Odu2SapiMode | INTEGER { off(0), sapi(1), dapi(2), sapidapi(3) } | current | Mode for SAPI-DAPI |
| Pme1008Otu2SapiMode | INTEGER { off(0), sapi(1), dapi(2), sapidapi(3) } | current | Mode for SAPI-DAPI |
| Pme1008OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on client and line ports |