EKINOPS-Pmfan-MIB
91 objects
MIB for the Ekinops Pmfan hardware.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.59 | Identitymodulepmfan | MIB for the Ekinops Pmfan hardware. | ||
| 1.3.6.1.4.1.20044.59.2 | Nodepmfanalarms | |||
| 1.3.6.1.4.1.20044.59.2.1 | NodepmfanAlmOther | |||
| 1.3.6.1.4.1.20044.59.2.1.1 | NodepmfanAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.59.2.1.1.2 | NodepmfanAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.59.2.1.1.2.1 | ScalarpmfanAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.59.2.1.1.2.2 | ScalarpmfanAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.59.2.1.1.2.3 | ScalarpmfanAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.59.2.1.1.2.4 | ScalarpmfanAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.59.2.1.2 | NodepmfanAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.59.2.1.2.16 | NodepmfanAlmfilterAlm | |||
| 1.3.6.1.4.1.20044.59.2.1.2.16.15 | ScalarpmfanAlmFilterNotPresent | read-only | current | Dust Filter Presence :This OID indicates that the dust filter is not present <Help> This alarm indicates that the dust filter is not present <Condtype> FILTER_… |
| 1.3.6.1.4.1.20044.59.2.1.2.20 | NodepmfanAlmfansMgnt | |||
| 1.3.6.1.4.1.20044.59.2.1.2.20.2 | ScalarpmfanAlmFan1Fail | read-only | current | Fan Unit N�1 Failed On Fan Module :This OID indicates a failure on fan 1. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.3 | ScalarpmfanAlmFan2Fail | read-only | current | Fan Unit N�2 Failed On Fan Module :This OID indicates a failure on fan 2. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.4 | ScalarpmfanAlmFan3Fail | read-only | current | Fan Unit N�3 Failed On Fan Module :This OID indicates a failure on fan 3. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.5 | ScalarpmfanAlmFan4Fail | read-only | current | Fan Unit N�4 Failed On Fan Module :This OID indicates a failure on fan 4. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.6 | ScalarpmfanAlmFan5Fail | read-only | current | Fan Unit N�5 Failed On Fan Module :This OID indicates a failure on fan 5. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.7 | ScalarpmfanAlmFan6Fail | read-only | current | Fan Unit N�6 Failed On Fan Module :This OID indicates a failure on fan 6. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.13 | ScalarpmfanAlmFansOff | read-only | current | Fans Fail :This OID indicates the fans of the PMFAN are OFF <Help> This alarm indicates the fans of the PMFAN are OFF <Condtype> FANS_OFF <Probcause> heatingVe… |
| 1.3.6.1.4.1.20044.59.2.1.2.20.14 | ScalarpmfanAlmFanLowSpeed | read-only | current | Fan Low Speed :This OID indicates the fans of the PM FAN are blowing at low speed <Help> This alarm indicates the fans of the PM FAN are blowing at low speed <… |
| 1.3.6.1.4.1.20044.59.2.1.2.21 | NodepmfanAlmchassisTempAlarms | |||
| 1.3.6.1.4.1.20044.59.2.1.2.21.1 | ScalarpmfanAlmChassisTempLowAlarm | read-only | current | Chassis Temperature Low Alarm :This OID indicates a low threshold temperature alarm is reached <Help> This alarm indicates that the chassis temperature is unde… |
| 1.3.6.1.4.1.20044.59.2.1.2.21.2 | ScalarpmfanAlmChassisTempHighAlarm | read-only | current | Chassis Temperature High Alarm :This OID indicates a high threshold temperature alarm is reached <Help> This alarm indicates that the chassis temperature is ov… |
| 1.3.6.1.4.1.20044.59.2.1.2.22 | NodepmfanAlmchassisTempWarnings | |||
| 1.3.6.1.4.1.20044.59.2.1.2.22.1 | ScalarpmfanAlmChassisTempLowWarning | read-only | current | Chassis Temperature Low Warning :This OID indicates a low threshold temperature warning is reached <Help> This alarm indicates that the chassis temperature is … |
| 1.3.6.1.4.1.20044.59.2.1.2.22.2 | ScalarpmfanAlmChassisTempHighWarning | read-only | current | Chassis Temperature High Warning :This OID indicates a high threshold temperature warning is reached <Help> This alarm indicates that the chassis temperature i… |
| 1.3.6.1.4.1.20044.59.2.1.2.70 | NodepmfanAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.59.2.1.2.70.1 | ScalarpmfanAlmRegReadFail | read-only | current | Reg_Read_Fail : <Condtype> REG_READ_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.59.2.1.2.70.2 | ScalarpmfanAlmResetHwInitFail | read-only | current | Reset_HW_Init_Fail : <Condtype> RESET_HW_INIT_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.59.2.1.2.70.3 | ScalarpmfanAlmConfReadFail | read-only | current | Conf_Read_Fail : <Condtype> CONF_READ_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.59.2.1.2.70.4 | ScalarpmfanAlmInvReadFail | read-only | current | : <Condtype> INV_READ_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.59.2.1.3 | NodepmfanAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.59.2.1.3.0 | NodepmfanAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.59.2.1.3.0.9 | ScalarpmfanAlmModuleGlobFailure | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MODULE_GLOB_FAILURE <Probcause> equipmentMalfunction (16) <Alarmty… |
| 1.3.6.1.4.1.20044.59.2.1.3.0.11 | ScalarpmfanAlmDefPowerA | read-only | current | Power Input A Present :This OID indicates that there is not input power on the right power connector (A). <Help> This alarm indicates if the power input A is p… |
| 1.3.6.1.4.1.20044.59.2.1.3.0.12 | ScalarpmfanAlmDefPowerB | read-only | current | Power Input B Present :This OID indicates that there is not input power on the right power connector (B). <Help> This alarm indicates if the power input B is p… |
| 1.3.6.1.4.1.20044.59.2.1.3.0.13 | ScalarpmfanAlmAcknowledge | read-only | current | Alarm Ack. :This OID indicates the alarms have been acknowledged by the user (locally or remotely) <Help> This status indicates the alarms have been acknowledg… |
| 1.3.6.1.4.1.20044.59.2.1.3.0.15 | ScalarpmfanAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition. <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerPro… |
| 1.3.6.1.4.1.20044.59.2.1.3.0.16 | ScalarpmfanAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition. <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerPro… |
| 1.3.6.1.4.1.20044.59.2.1.3.1 | NodepmfanAlmsynthAlm1 | |||
| 1.3.6.1.4.1.20044.59.2.1.3.1.10 | ScalarpmfanAlmFansFailure | read-only | current | Chassis Fan Module Failure :This OID indicates that at least one of the FAN unit of the FAN module is in fail condition <Help> This alarm indicates that one of… |
| 1.3.6.1.4.1.20044.59.3 | Nodepmfanmeasures | |||
| 1.3.6.1.4.1.20044.59.3.1 | NodepmfanMesrOther | |||
| 1.3.6.1.4.1.20044.59.3.1.64 | ScalarpmfanMesrtempChassis | read-only | current | Chassis Temperature :This OID gives the temperature value of the Chassis (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature value of t… |
| 1.3.6.1.4.1.20044.59.3.1.65 | ScalarpmfanMesrtempModule | read-only | current | Module Temperature :This OID gives the temperature value of the PMFAN (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature value of the … |
| 1.3.6.1.4.1.20044.59.6 | NodepmfancontrolsWrite | |||
| 1.3.6.1.4.1.20044.59.6.1 | NodepmfanCtrlOther | |||
| 1.3.6.1.4.1.20044.59.6.1.0 | NodepmfanCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.59.6.1.0.1 | ScalarpmfanCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.59.6.1.0.9 | ScalarpmfanCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.59.6.1.0.13 | ScalarpmfanCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.59.6.1.4 | NodepmfanCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.59.6.1.4.1 | ScalarpmfanCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.59.6.1.4.2 | ScalarpmfanCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.59.6.1.5 | NodepmfanCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.59.6.1.5.2 | ScalarpmfanCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.59.6.1.5.3 | ScalarpmfanCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.59.6.1.43 | NodepmfanCtrlpoweraLed | |||
| 1.3.6.1.4.1.20044.59.6.1.43.1 | ScalarpmfanCtrlLedPowerA | read-write | current | PowerA_Led :This OID switches on the PowerA Led on the PMFAN <Help> This control sets the PowerA led |
| 1.3.6.1.4.1.20044.59.6.1.44 | NodepmfanCtrlpowerbLed | |||
| 1.3.6.1.4.1.20044.59.6.1.44.1 | ScalarpmfanCtrlLedPowerB | read-write | current | PowerB_Led :This OID switches on the PowerB Led on the PMFAN <Help> This control sets the PowerB led |
| 1.3.6.1.4.1.20044.59.6.1.64 | NodepmfanCtrlledTest | |||
| 1.3.6.1.4.1.20044.59.6.1.64.1 | ScalarpmfanCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.59.6.1.64.2 | ScalarpmfanCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.59.6.1.64.3 | ScalarpmfanCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.59.6.1.65 | NodepmfanCtrlacknowledgeActiv | |||
| 1.3.6.1.4.1.20044.59.6.1.65.1 | ScalarpmfanCtrlAckActiv | read-write | current | Alarm Ack. :This OID is used to acknowledge the current active alarms of the chassis <Help> This control is used to acknowledge the current active alarms of th… |
| 1.3.6.1.4.1.20044.59.7 | Nodepmfanri | |||
| 1.3.6.1.4.1.20044.59.7.1 | NodepmfanriTable | |||
| 1.3.6.1.4.1.20044.59.7.2 | ScalarpmfanRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.59.7.3 | ScalarpmfanRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.59.7.4 | ScalarpmfanRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.59.7.5 | ScalarpmfanRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.59.9 | NodepmfanConfig | |||
| 1.3.6.1.4.1.20044.59.9.1 | NodepmfanCfgLsd | |||
| 1.3.6.1.4.1.20044.59.9.2 | NodepmfanCfgStartUp | |||
| 1.3.6.1.4.1.20044.59.9.2.1 | Nodepmfantableother | |||
| 1.3.6.1.4.1.20044.59.9.2.1.2 | ScalarpmfanCfglowspeedThresh | read-write | current | Fans Low Speed Threshold Temp :This register selects the temperature threshold to trigger the fans to a low speed when the temperature is reaching that thresho… |
| 1.3.6.1.4.1.20044.59.9.2.1.3 | ScalarpmfanCfghighspeedThresh | read-write | current | Fans High Speed Threshold Temp :This register selects the temperature threshold to trigger the fans to a high speed when the temperature is reaching that thres… |
| 1.3.6.1.4.1.20044.59.9.2.1.10 | ScalarpmfanCfgpmfanMgnt | read-write | current | Pmfan Management :This register selects the features to manage the Pmfan |
| 1.3.6.1.4.1.20044.59.9.3 | NodepmfanCfgLabels | |||
| 1.3.6.1.4.1.20044.59.9.257 | ScalarpmfanCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.59.10 | Nodepmfantraps | |||
| 1.3.6.1.4.1.20044.59.10.2 | ScalarpmfantrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.59.10.32 | NotificationpmfanPowerTrapUrgentGoesOn | current | Urgent power default is activated | |
| 1.3.6.1.4.1.20044.59.10.33 | NotificationpmfanPowerTrapUrgentGoesOff | current | Urgent power default disappeared | |
| 1.3.6.1.4.1.20044.59.10.34 | NotificationpmfanPowerTrapCritGoesOn | current | Critical power default is activated | |
| 1.3.6.1.4.1.20044.59.10.35 | NotificationpmfanPowerTrapCritGoesOff | current | Critical power default disappeared | |
| 1.3.6.1.4.1.20044.59.10.44 | NotificationpmfanFanTrapCritGoesOn | current | Critical fan default is activated | |
| 1.3.6.1.4.1.20044.59.10.45 | NotificationpmfanFanTrapCritGoesOff | current | Critical fan default disappeared |