EKINOPS-Pmo1008mp-MIB
701 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.121 | IdentitymodulePmo1008mp | Creation. | ||
| 1.3.6.1.4.1.20044.121.2 | Nodepmo1008mpalarms | |||
| 1.3.6.1.4.1.20044.121.2.1 | Nodepmo1008mpAlmOther | |||
| 1.3.6.1.4.1.20044.121.2.1.1 | Nodepmo1008mpAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.121.2.1.1.2 | Nodepmo1008mpAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.121.2.1.1.2.1 | Scalarpmo1008mpAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.121.2.1.1.2.2 | Scalarpmo1008mpAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.121.2.1.1.2.3 | Scalarpmo1008mpAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.121.2.1.1.2.4 | Scalarpmo1008mpAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.121.2.1.2 | Nodepmo1008mpAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.121.2.1.2.250 | Nodepmo1008mpAlmadddropTsClientRxProtWest | |||
| 1.3.6.1.4.1.20044.121.2.1.2.250.1 | Scalarpmo1008mpAlmAdddropClient1West | read-only | current | Client 1 From Line 1 Active :This OID indicates the Client #1 from Line 1 is active <Condtype> ADDDROP_CLIENT1_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.2 | Scalarpmo1008mpAlmAdddropClient2West | read-only | current | Client 2 From Line 1 Active :This OID indicates the Client #2 from Line 1 is active <Condtype> ADDDROP_CLIENT2_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.3 | Scalarpmo1008mpAlmAdddropClient3West | read-only | current | Client 3 From Line 1 Active :This OID indicates the Client #3 from Line 1 is active <Condtype> ADDDROP_CLIENT3_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.4 | Scalarpmo1008mpAlmAdddropClient4West | read-only | current | Client 4 From Line 1 Active :This OID indicates the Client #4 from Line 1 is active <Condtype> ADDDROP_CLIENT4_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.5 | Scalarpmo1008mpAlmAdddropClient5West | read-only | current | Client 5 From Line 1 Active :This OID indicates the Client #5 from Line 1 is active <Condtype> ADDDROP_CLIENT5_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.6 | Scalarpmo1008mpAlmAdddropClient6West | read-only | current | Client 6 From Line 1 Active :This OID indicates the Client #6 from Line 1 is active <Condtype> ADDDROP_CLIENT6_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.7 | Scalarpmo1008mpAlmAdddropClient7West | read-only | current | Client 7 From Line 1 Active :This OID indicates the Client #7 from Line 1 is active <Condtype> ADDDROP_CLIENT7_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.250.8 | Scalarpmo1008mpAlmAdddropClient8West | read-only | current | Client 8 From Line 1 Active :This OID indicates the Client #8 from Line 1 is active <Condtype> ADDDROP_CLIENT8_WEST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251 | Nodepmo1008mpAlmadddropTsClientRxProtEast | |||
| 1.3.6.1.4.1.20044.121.2.1.2.251.1 | Scalarpmo1008mpAlmAdddropClient1East | read-only | current | Client 1 From Line 2 Active :This OID indicates the Client #1 from Line 2 is active <Condtype> ADDDROP_CLIENT1_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.2 | Scalarpmo1008mpAlmAdddropClient2East | read-only | current | Client 2 From Line 2 Active :This OID indicates the Client #2 from Line 2 is active <Condtype> ADDDROP_CLIENT2_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.3 | Scalarpmo1008mpAlmAdddropClient3East | read-only | current | Client 3 From Line 2 Active :This OID indicates the Client #3 from Line 2 is active <Condtype> ADDDROP_CLIENT3_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.4 | Scalarpmo1008mpAlmAdddropClient4East | read-only | current | Client 4 From Line 2 Active :This OID indicates the Client #4 from Line 2 is active <Condtype> ADDDROP_CLIENT4_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.5 | Scalarpmo1008mpAlmAdddropClient5East | read-only | current | Client 5 From Line 2 Active :This OID indicates the Client #5 from Line 2 is active <Condtype> ADDDROP_CLIENT5_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.6 | Scalarpmo1008mpAlmAdddropClient6East | read-only | current | Client 6 From Line 2 Active :This OID indicates the Client #6 from Line 2 is active <Condtype> ADDDROP_CLIENT6_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.7 | Scalarpmo1008mpAlmAdddropClient7East | read-only | current | Client 7 From Line 2 Active :This OID indicates the Client #7 from Line 2 is active <Condtype> ADDDROP_CLIENT7_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.2.251.8 | Scalarpmo1008mpAlmAdddropClient8East | read-only | current | Client 8 From Line 2 Active :This OID indicates the Client #8 from Line 2 is active <Condtype> ADDDROP_CLIENT8_EAST <Probcause> other (1) <Alarmtype> other (1)… |
| 1.3.6.1.4.1.20044.121.2.1.3 | Nodepmo1008mpAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.121.2.1.3.0 | Nodepmo1008mpAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.121.2.1.3.0.9 | Scalarpmo1008mpAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.121.2.1.3.0.15 | Scalarpmo1008mpAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.121.2.1.3.0.16 | Scalarpmo1008mpAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.121.2.2 | Nodepmo1008mpAlmClient | |||
| 1.3.6.1.4.1.20044.121.2.2.1 | Nodepmo1008mpAlmClientNurg | |||
| 1.3.6.1.4.1.20044.121.2.2.1.232 | Tablepmo1008mpAlmclientSfpWarnDdmTable | not-accessible | current | List of pmo1008mpAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1 | Rowpmo1008mpAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pmo1008mpAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.1 | Columnpmo1008mpAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pmo1008mpAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.2 | Columnpmo1008mpAlmClientTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Optical Module ouput power is lower than the threshold value written in the Optical Module EEPRO… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.3 | Columnpmo1008mpAlmClientTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Optical Module ouput power is higher than the threshold value written in the Optical Module EEP… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.4 | Columnpmo1008mpAlmClientTxBiasLowWngPortn | read-only | current | Client Optical Module Bias Low Warning :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.5 | Columnpmo1008mpAlmClientTxBiasHighWngPortn | read-only | current | Client Optical Module Bias High Warning :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.6 | Columnpmo1008mpAlmClientVccLowWngPortn | read-only | current | Client Optical Module power Supply Low Warning :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.7 | Columnpmo1008mpAlmClientVccHighWngPortn | read-only | current | Client Optical Module power Supply High Warning :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Opti… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.8 | Columnpmo1008mpAlmClientTempLowWngPortn | read-only | current | Client Optical Module Temp Low Warning :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.9 | Columnpmo1008mpAlmClientTempHighWngPortn | read-only | current | Client Optical Module Temp High Warning :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.16 | Columnpmo1008mpAlmClientRxPwrLowWngPortn | read-only | current | Client Optical Module Rx Power Low Warning :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.121.2.2.1.232.1.17 | Columnpmo1008mpAlmClientRxPwrHighWngPortn | read-only | current | Client Optical Module Rx Power High Warning :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical M… |
| 1.3.6.1.4.1.20044.121.2.2.2 | Nodepmo1008mpAlmClientUrg | |||
| 1.3.6.1.4.1.20044.121.2.2.2.88 | Tablepmo1008mpAlmclientHostLaneFaultTable | not-accessible | current | List of pmo1008mpAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.121.2.2.2.88.1 | Rowpmo1008mpAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pmo1008mpAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.121.2.2.2.88.1.1 | Columnpmo1008mpAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pmo1008mpAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.121.2.2.2.88.1.2 | Columnpmo1008mpAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.121.2.2.2.88.1.3 | Columnpmo1008mpAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Optical Module <Help> Alarm indicating a Loss of Signal is detected … |
| 1.3.6.1.4.1.20044.121.2.2.2.88.1.7 | Columnpmo1008mpAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> Alarm indicating a Client Signal… |
| 1.3.6.1.4.1.20044.121.2.2.2.88.1.10 | Columnpmo1008mpAlmClientOdu2EDaisPortn | read-only | current | ODU2(e) DAIS :This OID indicates that a Alarm Indication SIgnal has been detected on client port<Help> This alarm indicates if an Alarm Indication Signal has b… |
| 1.3.6.1.4.1.20044.121.2.2.2.216 | Tablepmo1008mpAlmclientSfpAlmDdmTable | not-accessible | current | List of pmo1008mpAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1 | Rowpmo1008mpAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pmo1008mpAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.1 | Columnpmo1008mpAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pmo1008mpAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.2 | Columnpmo1008mpAlmClientTxPwrLowAlaPortn | read-only | current | Client Optical Module Tx Power Low Alarm :This OID indicates that the Optical Module output power is lower than the threshold value written in the Optical Modu… |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.3 | Columnpmo1008mpAlmClientTxPwrHighAlaPortn | read-only | current | Client Optical Module Tx Power High Alarm :This OID indicates that the Optical Module output power is higher than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.4 | Columnpmo1008mpAlmClientTxBiasLowAlaPortn | read-only | current | Client Optical Module Bias Low Alarm :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.5 | Columnpmo1008mpAlmClientTxBiasHighAlaPortn | read-only | current | Client Optical Module Bias High Alarm :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.6 | Columnpmo1008mpAlmClientVccLowAlaPortn | read-only | current | Client Optical Module Power Supply Low Alarm :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.7 | Columnpmo1008mpAlmClientVccHighAlaPortn | read-only | current | Client Optical Module Power Supply High Alarm :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.8 | Columnpmo1008mpAlmClientTempLowAlaPortn | read-only | current | Client Optical Module Temp Low Alarm :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.9 | Columnpmo1008mpAlmClientTempHighAlaPortn | read-only | current | Client Optical Module Temp High Alarm :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.16 | Columnpmo1008mpAlmClientRxPwrLowAlaPortn | read-only | current | Client Optical Module Rx Power Low Alarm :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.121.2.2.2.216.1.17 | Columnpmo1008mpAlmClientRxPwrHighAlaPortn | read-only | current | Client Optical Module Rx Power High Alarm :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.121.2.2.3 | Nodepmo1008mpAlmClientCrit | |||
| 1.3.6.1.4.1.20044.121.2.2.3.8 | Tablepmo1008mpAlmsynthAlmPortTable | not-accessible | current | List of pmo1008mpAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1 | Rowpmo1008mpAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pmo1008mpAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.1 | Columnpmo1008mpAlmsynthAlmPortIndex | read-only | current | Index definition for the pmo1008mpAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.2 | Columnpmo1008mpAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the optical Module is not present in the client port. <Help> Alarm indicating Line Optical Module is not … |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.5 | Columnpmo1008mpAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.6 | Columnpmo1008mpAlmDwLsdPortn | read-only | current | Client Optical Module Laser Shutdown :This OID indicates the Client Optical Module laser is shutdown. <Help> Line interface transmit state <Condtype> DW_LSD_1 … |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.7 | Columnpmo1008mpAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> client port service state : In Servi… |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.8 | Columnpmo1008mpAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.9 | Columnpmo1008mpAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> Client Alarm Indication Signal insertion status on the clien… |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.10 | Columnpmo1008mpAlmSfpDdmWarningPortn | read-only | current | Warning On Client Optical Module DDM :This OID indicates a warning is being received from the Client Optical Module DDM <Help> A DDM Warningis detected on the … |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.11 | Columnpmo1008mpAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Optical Module DDM :This OID indicates an alarm is being received from the Client Optical Module DDM <Help> A DDM Alarm is detected on the clie… |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.13 | Columnpmo1008mpAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.14 | Columnpmo1008mpAlmClientLoopbackOnPortn | read-only | current | Client Loopback Enabled :This OID indicates a loopback is enabled on the port.<Help> Alarm indicating a loopback is enabled on the port <Condtype> CLIENT_LOOPB… |
| 1.3.6.1.4.1.20044.121.2.2.3.8.1.17 | Columnpmo1008mpAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> Client Signal Fail insertion status on the line sig… |
| 1.3.6.1.4.1.20044.121.2.3 | Nodepmo1008mpAlmLine | |||
| 1.3.6.1.4.1.20044.121.2.3.1 | Nodepmo1008mpAlmLineNurg | |||
| 1.3.6.1.4.1.20044.121.2.3.2 | Nodepmo1008mpAlmLineUrg | |||
| 1.3.6.1.4.1.20044.121.2.3.2.104 | Tablepmo1008mpAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pmo1008mpAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1 | Rowpmo1008mpAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pmo1008mpAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.1 | Columnpmo1008mpAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pmo1008mpAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.2 | Columnpmo1008mpAlmLineTxPwrLowAlaPortn | read-only | current | Line Optical Module Tx Power Low Alarm :This OID indicates that the Optical Module ouput power is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.3 | Columnpmo1008mpAlmLineTxPwrHighAlaPortn | read-only | current | Line Optical Module Tx Power High Alarm :This OID indicates that the Optical Module ouput power is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.4 | Columnpmo1008mpAlmLineTxBiasLowAlaPortn | read-only | current | Line Optical Module Bias Low Alarm :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical Modu… |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.5 | Columnpmo1008mpAlmLineTxBiasHighAlaPortn | read-only | current | Line Optical Module Bias High Alarm :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.6 | Columnpmo1008mpAlmLineVccLowAlaPortn | read-only | current | Line Optical Module power Supply Low Alarm :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.7 | Columnpmo1008mpAlmLineVccHighAlaPortn | read-only | current | Line Optical Module power Supply High Alarm :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.8 | Columnpmo1008mpAlmLineTempLowAlaPortn | read-only | current | Line Optical Module Temp Low Alarm :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module EEPR… |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.9 | Columnpmo1008mpAlmLineTempHighAlaPortn | read-only | current | Line Optical Module Temp High Alarm :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.16 | Columnpmo1008mpAlmLineRxPwrLowAlaPortn | read-only | current | Line Optical Module Rx Power Low Alarm :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.121.2.3.2.104.1.17 | Columnpmo1008mpAlmLineRxPwrHighAlaPortn | read-only | current | Line Optical Module Rx Power High Alarm :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.121.2.3.2.120 | Tablepmo1008mpAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pmo1008mpAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1 | Rowpmo1008mpAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pmo1008mpAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.1 | Columnpmo1008mpAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pmo1008mpAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.2 | Columnpmo1008mpAlmLineTxPwLowWngPortn | read-only | current | Line Optical Module Tx Power Low Warning :This OID indicates that the Optical Module ouput power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.3 | Columnpmo1008mpAlmLineTxPwrHighWngPortn | read-only | current | Line Optical Module Tx Power High Warning :This OID indicates that the Optical Module ouput power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.4 | Columnpmo1008mpAlmLineTxBiasLowWngPortn | read-only | current | Line Optical Module Bias Low Warning :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.5 | Columnpmo1008mpAlmLineTxBiasHighWngPortn | read-only | current | Line Optical Module Bias High Warning :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.6 | Columnpmo1008mpAlmLineVccLowWngPortn | read-only | current | Line Optical Module power Supply Low Warning :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.7 | Columnpmo1008mpAlmLineVccHighWngPortn | read-only | current | Line Optical Module power Supply High Warning :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.8 | Columnpmo1008mpAlmLineTempLowWngPortn | read-only | current | Line Optical Module Temp Low Warning :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.9 | Columnpmo1008mpAlmLineTempHighWngPortn | read-only | current | Line Optical Module Temp High Warning :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.16 | Columnpmo1008mpAlmLineRxPwrLowWngPortn | read-only | current | Line Optical Module Rx Power Low Warning :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.121.2.3.2.120.1.17 | Columnpmo1008mpAlmLineRxPwrHighWngPortn | read-only | current | Line Optical Module Rx Power High Warning :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.121.2.3.2.152 | Tablepmo1008mpAlmlineHostLaneFaultTable | not-accessible | current | List of pmo1008mpAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.121.2.3.2.152.1 | Rowpmo1008mpAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pmo1008mpAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.121.2.3.2.152.1.1 | Columnpmo1008mpAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pmo1008mpAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.121.2.3.2.152.1.2 | Columnpmo1008mpAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Optical Module<Help> Alarm indicating a Loss of Signal is detected on th… |
| 1.3.6.1.4.1.20044.121.2.3.2.152.1.3 | Columnpmo1008mpAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal<Help> Alarm indicating frame alignment errors on line interface … |
| 1.3.6.1.4.1.20044.121.2.3.2.152.1.4 | Columnpmo1008mpAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal<Help> Alarm indicating a Backward Defect Indic… |
| 1.3.6.1.4.1.20044.121.2.3.2.152.1.5 | Columnpmo1008mpAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal<Help> Alarm indicating a Backward Defect Indic… |
| 1.3.6.1.4.1.20044.121.2.3.3 | Nodepmo1008mpAlmLineCrit | |||
| 1.3.6.1.4.1.20044.121.2.3.3.24 | Tablepmo1008mpAlmsynthAlmLineTable | not-accessible | current | List of pmo1008mpAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1 | Rowpmo1008mpAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pmo1008mpAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.1 | Columnpmo1008mpAlmsynthAlmLineIndex | read-only | current | Index definition for the pmo1008mpAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.2 | Columnpmo1008mpAlmLineSfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the optical Module is not present in the line port. <Help> Alarm indicating Line Optical Module is not plug… |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.5 | Columnpmo1008mpAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.6 | Columnpmo1008mpAlmLineTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the Line Optical module laser is shutdown. <Help> Line interface transmit state <Condtype> LINE_TX_OFF <… |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.7 | Columnpmo1008mpAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) or Out of Service (2) <Help> line port service state : In Service (OFF) / Out Of … |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.10 | Columnpmo1008mpAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> A DDM Warningis detected on the line Opti… |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.11 | Columnpmo1008mpAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line Optical Module DDM. <Help> A DDM Alarm is detected on the line Opti… |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.13 | Columnpmo1008mpAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.121.2.3.3.24.1.14 | Columnpmo1008mpAlmLineLoopbackOnPortn | read-only | current | Line Loopback Enabled :This OID indicates a loopback is enabled on the port.<Help> Alarm indicating a loopback is enabled on the port <Condtype> LINE_LOOPBACK_… |
| 1.3.6.1.4.1.20044.121.3 | Nodepmo1008mpmeasures | |||
| 1.3.6.1.4.1.20044.121.3.1 | Nodepmo1008mpMesrOther | |||
| 1.3.6.1.4.1.20044.121.3.1.144 | Scalarpmo1008mpMesrmodulePwrConsumption | read-only | current | Module Power Consumption :This OID gives the Total Power consumption of the module with its Optical Modules (Power = AV_U16/100) (Unit = W)<Help> This Measure … |
| 1.3.6.1.4.1.20044.121.3.2 | Nodepmo1008mpMesrClient | |||
| 1.3.6.1.4.1.20044.121.3.2.16 | Tablepmo1008mpMesrclientTempTable | not-accessible | current | List of pmo1008mpMesrclientTemp Article |
| 1.3.6.1.4.1.20044.121.3.2.16.1 | Rowpmo1008mpMesrclientTempEntry | not-accessible | current | Row definition for the pmo1008mpMesrclientTemp table |
| 1.3.6.1.4.1.20044.121.3.2.16.1.1 | Columnpmo1008mpMesrclientTempIndex | read-only | current | Index definition for the pmo1008mpMesrclientTemp table |
| 1.3.6.1.4.1.20044.121.3.2.16.1.2 | Columnpmo1008mpMesrclientTempPortn | read-only | current | Client Optical Module Temperature :This OID gives the Laser temperature value of the Client Optical Module, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.121.3.2.32 | Tablepmo1008mpMesrclientTxBiasTable | not-accessible | current | List of pmo1008mpMesrclientTxBias Article |
| 1.3.6.1.4.1.20044.121.3.2.32.1 | Rowpmo1008mpMesrclientTxBiasEntry | not-accessible | current | Row definition for the pmo1008mpMesrclientTxBias table |
| 1.3.6.1.4.1.20044.121.3.2.32.1.1 | Columnpmo1008mpMesrclientTxBiasIndex | read-only | current | Index definition for the pmo1008mpMesrclientTxBias table |
| 1.3.6.1.4.1.20044.121.3.2.32.1.2 | Columnpmo1008mpMesrclientTxBiasPortn | read-only | current | Client Optical Module Laser Bias :This OID gives the Laser bias value of the Client Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.121.3.2.48 | Tablepmo1008mpMesrclientTxPwrTable | not-accessible | current | List of pmo1008mpMesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.121.3.2.48.1 | Rowpmo1008mpMesrclientTxPwrEntry | not-accessible | current | Row definition for the pmo1008mpMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.121.3.2.48.1.1 | Columnpmo1008mpMesrclientTxPwrIndex | read-only | current | Index definition for the pmo1008mpMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.121.3.2.48.1.2 | Columnpmo1008mpMesrclientTxPwrPortn | read-only | current | Client Optical Module Tx Power :This OID gives the transmit power value of the Client Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Power … |
| 1.3.6.1.4.1.20044.121.3.2.64 | Tablepmo1008mpMesrclientRxPwrTable | not-accessible | current | List of pmo1008mpMesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.121.3.2.64.1 | Rowpmo1008mpMesrclientRxPwrEntry | not-accessible | current | Row definition for the pmo1008mpMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.121.3.2.64.1.1 | Columnpmo1008mpMesrclientRxPwrIndex | read-only | current | Index definition for the pmo1008mpMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.121.3.2.64.1.2 | Columnpmo1008mpMesrclientRxPwrPortn | read-only | current | Client Optical Module Rx Power :This OID gives the receive power value of the Client Optical Module, read in the DDM (Digital Diagnostic Monitoring) (Power = 1… |
| 1.3.6.1.4.1.20044.121.3.3 | Nodepmo1008mpMesrLine | |||
| 1.3.6.1.4.1.20044.121.3.3.80 | Tablepmo1008mpMesrlineTxPwrTable | not-accessible | current | List of pmo1008mpMesrlineTxPwr Article |
| 1.3.6.1.4.1.20044.121.3.3.80.1 | Rowpmo1008mpMesrlineTxPwrEntry | not-accessible | current | Row definition for the pmo1008mpMesrlineTxPwr table |
| 1.3.6.1.4.1.20044.121.3.3.80.1.1 | Columnpmo1008mpMesrlineTxPwrIndex | read-only | current | Index definition for the pmo1008mpMesrlineTxPwr table |
| 1.3.6.1.4.1.20044.121.3.3.80.1.2 | Columnpmo1008mpMesrlineTxPwrPortn | read-only | current | Line Optical Module Tx Power :This OID gives the Tx Laser transmit power value of the Line Optical Module, read in the DDM (Digital Diagnostic Monitoring) (Pow… |
| 1.3.6.1.4.1.20044.121.3.3.96 | Tablepmo1008mpMesrlineTempTable | not-accessible | current | List of pmo1008mpMesrlineTemp Article |
| 1.3.6.1.4.1.20044.121.3.3.96.1 | Rowpmo1008mpMesrlineTempEntry | not-accessible | current | Row definition for the pmo1008mpMesrlineTemp table |
| 1.3.6.1.4.1.20044.121.3.3.96.1.1 | Columnpmo1008mpMesrlineTempIndex | read-only | current | Index definition for the pmo1008mpMesrlineTemp table |
| 1.3.6.1.4.1.20044.121.3.3.96.1.2 | Columnpmo1008mpMesrlineTempPortn | read-only | current | Line Optical Module Temperature :This OID gives the Laser Temperature value of the Line Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Temp… |
| 1.3.6.1.4.1.20044.121.3.3.112 | Tablepmo1008mpMesrlineTxBiasTable | not-accessible | current | List of pmo1008mpMesrlineTxBias Article |
| 1.3.6.1.4.1.20044.121.3.3.112.1 | Rowpmo1008mpMesrlineTxBiasEntry | not-accessible | current | Row definition for the pmo1008mpMesrlineTxBias table |
| 1.3.6.1.4.1.20044.121.3.3.112.1.1 | Columnpmo1008mpMesrlineTxBiasIndex | read-only | current | Index definition for the pmo1008mpMesrlineTxBias table |
| 1.3.6.1.4.1.20044.121.3.3.112.1.2 | Columnpmo1008mpMesrlineTxBiasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the Tx Laser Bias value of the Line Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV… |
| 1.3.6.1.4.1.20044.121.3.3.128 | Tablepmo1008mpMesrlineRxPwrTable | not-accessible | current | List of pmo1008mpMesrlineRxPwr Article |
| 1.3.6.1.4.1.20044.121.3.3.128.1 | Rowpmo1008mpMesrlineRxPwrEntry | not-accessible | current | Row definition for the pmo1008mpMesrlineRxPwr table |
| 1.3.6.1.4.1.20044.121.3.3.128.1.1 | Columnpmo1008mpMesrlineRxPwrIndex | read-only | current | Index definition for the pmo1008mpMesrlineRxPwr table |
| 1.3.6.1.4.1.20044.121.3.3.128.1.2 | Columnpmo1008mpMesrlineRxPwrPortn | read-only | current | Line Optical Module Rx Power :This OID gives the Receive power value of the Line Optical Module, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*lo… |
| 1.3.6.1.4.1.20044.121.4 | Nodepmo1008mpcounters | |||
| 1.3.6.1.4.1.20044.121.4.1 | Nodepmo1008mpCntOther | |||
| 1.3.6.1.4.1.20044.121.4.2 | Nodepmo1008mpCntClient | |||
| 1.3.6.1.4.1.20044.121.4.2.64 | Tablepmo1008mpCntclientRemoteBipTable | not-accessible | current | List of pmo1008mpCntclientRemoteBip Article |
| 1.3.6.1.4.1.20044.121.4.2.64.1 | Rowpmo1008mpCntclientRemoteBipEntry | not-accessible | current | Row definition for the pmo1008mpCntclientRemoteBip table |
| 1.3.6.1.4.1.20044.121.4.2.64.1.1 | Columnpmo1008mpCntclientRemoteBipIndex | read-only | current | Index definition for the pmo1008mpCntclientRemoteBip table |
| 1.3.6.1.4.1.20044.121.4.2.64.1.2 | Columnpmo1008mpCntclientRemoteBipValuePortn | read-only | current | Client Output Errors :This counter is increased each time a B1 error (OC192/STM64 Only) is detected on the Client path<Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.121.4.2.64.1.3 | Columnpmo1008mpCntclientRemoteBipErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.121.4.2.64.1.4 | Columnpmo1008mpCntclientRemoteBipOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a BIP8 error counter overload on Port |
| 1.3.6.1.4.1.20044.121.4.2.96 | Tablepmo1008mpCntclientCbipCounterTable | not-accessible | current | List of pmo1008mpCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.121.4.2.96.1 | Rowpmo1008mpCntclientCbipCounterEntry | not-accessible | current | Row definition for the pmo1008mpCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.121.4.2.96.1.1 | Columnpmo1008mpCntclientCbipCounterIndex | read-only | current | Index definition for the pmo1008mpCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.121.4.2.96.1.2 | Columnpmo1008mpCntclientCbipCounterValuePortn | read-only | current | Client Input Errors :This counter is incremented each time a B1 error (OC192/STM64 Only) is detected on the Client port<Help> This counter gives the number of … |
| 1.3.6.1.4.1.20044.121.4.2.96.1.3 | Columnpmo1008mpCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.121.4.2.96.1.4 | Columnpmo1008mpCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.121.4.3 | Nodepmo1008mpCntLine | |||
| 1.3.6.1.4.1.20044.121.4.3.192 | Tablepmo1008mpCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pmo1008mpCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.121.4.3.192.1 | Rowpmo1008mpCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pmo1008mpCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.121.4.3.192.1.1 | Columnpmo1008mpCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pmo1008mpCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.121.4.3.192.1.2 | Columnpmo1008mpCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line SM BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (residua… |
| 1.3.6.1.4.1.20044.121.4.3.192.1.3 | Columnpmo1008mpCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.121.4.3.192.1.4 | Columnpmo1008mpCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.121.4.3.200 | Tablepmo1008mpCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pmo1008mpCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.121.4.3.200.1 | Rowpmo1008mpCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pmo1008mpCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.121.4.3.200.1.1 | Columnpmo1008mpCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pmo1008mpCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.121.4.3.200.1.2 | Columnpmo1008mpCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line pre-FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC |
| 1.3.6.1.4.1.20044.121.4.3.200.1.3 | Columnpmo1008mpCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.121.4.3.200.1.4 | Columnpmo1008mpCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.121.4.3.216 | Tablepmo1008mpCntlineDfrmTimCntTable | not-accessible | current | List of pmo1008mpCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.121.4.3.216.1 | Rowpmo1008mpCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pmo1008mpCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.121.4.3.216.1.1 | Columnpmo1008mpCntlineDfrmTimCntIndex | read-only | current | Index definition for the pmo1008mpCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.121.4.3.216.1.2 | Columnpmo1008mpCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.121.4.3.216.1.3 | Columnpmo1008mpCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.121.4.3.216.1.4 | Columnpmo1008mpCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.121.4.259 | Scalarpmo1008mpCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.121.4.260 | Scalarpmo1008mpCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.121.6 | Nodepmo1008mpcontrolsWrite | |||
| 1.3.6.1.4.1.20044.121.6.1 | Nodepmo1008mpCtrlOther | |||
| 1.3.6.1.4.1.20044.121.6.1.1 | Nodepmo1008mpCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.121.6.1.1.1 | Scalarpmo1008mpCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.121.6.1.1.2 | Scalarpmo1008mpCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.121.6.1.1.10 | Scalarpmo1008mpCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.121.6.1.1.14 | Scalarpmo1008mpCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.121.6.1.4 | Nodepmo1008mpCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.121.6.1.4.1 | Scalarpmo1008mpCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.121.6.1.4.2 | Scalarpmo1008mpCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.121.6.1.5 | Nodepmo1008mpCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.121.6.1.5.2 | Scalarpmo1008mpCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.121.6.1.5.3 | Scalarpmo1008mpCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.121.6.1.5.5 | Scalarpmo1008mpCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.121.6.1.5.6 | Scalarpmo1008mpCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.121.6.1.6 | Nodepmo1008mpCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.121.6.1.6.1 | Scalarpmo1008mpCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.121.6.1.6.5 | Scalarpmo1008mpCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.121.6.1.6.6 | Scalarpmo1008mpCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.121.6.1.6.7 | Scalarpmo1008mpCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.121.6.1.6.8 | Scalarpmo1008mpCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.121.6.1.192 | Nodepmo1008mpCtrlledTest | |||
| 1.3.6.1.4.1.20044.121.6.1.192.1 | Scalarpmo1008mpCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.121.6.1.192.2 | Scalarpmo1008mpCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.121.6.1.192.3 | Scalarpmo1008mpCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.121.6.2 | Nodepmo1008mpCtrlClient | |||
| 1.3.6.1.4.1.20044.121.6.2.16 | Tablepmo1008mpCtrlaccessLoopTable | not-accessible | current | List of pmo1008mpCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.121.6.2.16.1 | Rowpmo1008mpCtrlaccessLoopEntry | not-accessible | current | Row definition for the pmo1008mpCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.121.6.2.16.1.1 | Columnpmo1008mpCtrlaccessLoopIndex | read-only | current | Index definition for the pmo1008mpCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.121.6.2.16.1.2 | Columnpmo1008mpCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID enables the Client Facility Loopback, looping the client signal input on the output. <Help> This control enables the Client … |
| 1.3.6.1.4.1.20044.121.6.2.17 | Tablepmo1008mpCtrlclientLoopToLineTable | not-accessible | current | List of pmo1008mpCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.121.6.2.17.1 | Rowpmo1008mpCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pmo1008mpCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.121.6.2.17.1.1 | Columnpmo1008mpCtrlclientLoopToLineIndex | read-only | current | Index definition for the pmo1008mpCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.121.6.2.17.1.2 | Columnpmo1008mpCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID enables the Client Terminal Loopback, looping the client output signal on the input. <Help> This control enables the Client … |
| 1.3.6.1.4.1.20044.121.6.2.262 | Tablepmo1008mpCtrlclientResetAllCountTable | not-accessible | current | List of pmo1008mpCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.121.6.2.262.1 | Rowpmo1008mpCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pmo1008mpCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.121.6.2.262.1.1 | Columnpmo1008mpCtrlclientResetAllCountIndex | read-only | current | Index definition for the pmo1008mpCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.121.6.2.262.1.2 | Columnpmo1008mpCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.121.6.3 | Nodepmo1008mpCtrlLine | |||
| 1.3.6.1.4.1.20044.121.6.3.64 | Tablepmo1008mpCtrlcommAccessLoopTable | not-accessible | current | List of pmo1008mpCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.121.6.3.64.1 | Rowpmo1008mpCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pmo1008mpCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.121.6.3.64.1.1 | Columnpmo1008mpCtrlcommAccessLoopIndex | read-only | current | Index definition for the pmo1008mpCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.121.6.3.64.1.2 | Columnpmo1008mpCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID enables the Line Terminal loopback, looping the line output signal on the input. <Help> This control enables the Line Terminal… |
| 1.3.6.1.4.1.20044.121.6.3.66 | Tablepmo1008mpCtrllineLoopTable | not-accessible | current | List of pmo1008mpCtrllineLoop Article |
| 1.3.6.1.4.1.20044.121.6.3.66.1 | Rowpmo1008mpCtrllineLoopEntry | not-accessible | current | Row definition for the pmo1008mpCtrllineLoop table |
| 1.3.6.1.4.1.20044.121.6.3.66.1.1 | Columnpmo1008mpCtrllineLoopIndex | read-only | current | Index definition for the pmo1008mpCtrllineLoop table |
| 1.3.6.1.4.1.20044.121.6.3.66.1.2 | Columnpmo1008mpCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID enables the Line Facility Loopback mode, looping the line input signal on the output. The Upstream part of the module is timed… |
| 1.3.6.1.4.1.20044.121.6.3.263 | Tablepmo1008mpCtrllineResetAllCountTable | not-accessible | current | List of pmo1008mpCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.121.6.3.263.1 | Rowpmo1008mpCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pmo1008mpCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.121.6.3.263.1.1 | Columnpmo1008mpCtrllineResetAllCountIndex | read-only | current | Index definition for the pmo1008mpCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.121.6.3.263.1.2 | Columnpmo1008mpCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.121.7 | Nodepmo1008mpri | |||
| 1.3.6.1.4.1.20044.121.7.1 | Nodepmo1008mpriTable | |||
| 1.3.6.1.4.1.20044.121.7.1.1 | Tablepmo1008mpRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.121.7.1.1.1 | Rowpmo1008mpRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.121.7.1.1.1.1 | Columnpmo1008mpRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.121.7.1.1.1.2 | Columnpmo1008mpRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.121.7.1.2 | Tablepmo1008mpRinvLineTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.121.7.1.2.1 | Rowpmo1008mpRinvLineEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.121.7.1.2.1.1 | Columnpmo1008mpRinvLineIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.121.7.1.2.1.2 | Columnpmo1008mpRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.121.7.2 | Scalarpmo1008mpRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.121.7.3 | Scalarpmo1008mpRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.121.7.4 | Scalarpmo1008mpRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.121.7.5 | Scalarpmo1008mpRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.121.7.6 | Scalarpmo1008mpRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.121.8 | Nodepmo1008mpdownload | |||
| 1.3.6.1.4.1.20044.121.8.1 | Nodepmo1008mpDwlOther | |||
| 1.3.6.1.4.1.20044.121.8.1.0 | Nodepmo1008mpDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.121.8.1.0.1 | Scalarpmo1008mpDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.121.8.1.0.2 | Scalarpmo1008mpDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.121.8.1.1 | Nodepmo1008mpDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.121.8.1.1.1 | Scalarpmo1008mpDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.121.8.1.1.2 | Scalarpmo1008mpDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.121.8.1.1.5 | Scalarpmo1008mpDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.121.8.1.1.6 | Scalarpmo1008mpDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.121.8.1.2 | Nodepmo1008mpDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.121.8.1.2.1 | Scalarpmo1008mpDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.121.8.1.2.2 | Scalarpmo1008mpDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.121.8.1.2.3 | Scalarpmo1008mpDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.121.8.1.2.4 | Scalarpmo1008mpDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.121.8.1.2.5 | Scalarpmo1008mpDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.121.8.1.2.6 | Scalarpmo1008mpDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.121.8.1.2.7 | Scalarpmo1008mpDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.121.8.1.2.8 | Scalarpmo1008mpDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.121.8.2 | Nodepmo1008mpDwlClient | |||
| 1.3.6.1.4.1.20044.121.8.3 | Nodepmo1008mpDwlLine | |||
| 1.3.6.1.4.1.20044.121.9 | Nodepmo1008mpConfig | |||
| 1.3.6.1.4.1.20044.121.9.1 | Nodepmo1008mpCfgStartup | |||
| 1.3.6.1.4.1.20044.121.9.1.1 | Tablepmo1008mpCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.1.1.1 | Rowpmo1008mpCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.121.9.1.1.1.1 | Columnpmo1008mpCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.121.9.1.1.1.3 | Columnpmo1008mpCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.121.9.1.1.1.4 | Columnpmo1008mpCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.121.9.1.1.1.14 | Columnpmo1008mpCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.121.9.1.2 | Tablepmo1008mpCfgLinexr1StartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.1.2.1 | Rowpmo1008mpCfgLinexr1StartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.121.9.1.2.1.1 | Columnpmo1008mpCfgLinexr1StartupIndex | read-only | current | Index definition for the linexr1Startup table |
| 1.3.6.1.4.1.20044.121.9.1.2.1.3 | Columnpmo1008mpCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.121.9.1.2.1.14 | Columnpmo1008mpCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.121.9.1.3 | Tablepmo1008mpCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.1.3.1 | Rowpmo1008mpCfgOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.121.9.1.3.1.1 | Columnpmo1008mpCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.121.9.1.3.1.3 | Columnpmo1008mpCfgLineControlsPortn | read-write | deprecated | Default Line settings :This register configures the start-up settings on the ports |
| 1.3.6.1.4.1.20044.121.9.1.3.1.6 | Columnpmo1008mpCfgLinePwrLaserPortn | read-write | current | Default Line output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.121.9.1.3.1.7 | Columnpmo1008mpCfgLineFCurrentPortn | read-write | current | Default Line transceiver Channel :This register configures the start-up laser channel of the client transceiver |
| 1.3.6.1.4.1.20044.121.9.1.3.1.8 | Columnpmo1008mpCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the client transceiver |
| 1.3.6.1.4.1.20044.121.9.1.3.1.9 | Columnpmo1008mpCfgLineFoPortn | read-write | current | Default Line first Frequency :This register configures the start-up first frequency of the client transceiver |
| 1.3.6.1.4.1.20044.121.9.1.4 | Tablepmo1008mpCfgClientOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.1.4.1 | Rowpmo1008mpCfgClientOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.121.9.1.4.1.1 | Columnpmo1008mpCfgClientOtxtlhIndex | read-only | current | Index definition for the clientOtxtlh table |
| 1.3.6.1.4.1.20044.121.9.1.4.1.3 | Columnpmo1008mpCfgControlsPortn | read-write | deprecated | Defaut Client settings :This register configures the start-up settings on the ports |
| 1.3.6.1.4.1.20044.121.9.1.4.1.6 | Columnpmo1008mpCfgClientPwrLaserPortn | read-write | deprecated | Defaut Client output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.121.9.1.4.1.7 | Columnpmo1008mpCfgClientFCurrentPortn | read-write | deprecated | Default Client transceiver Channel :This register configures the start-up laser channel of the client transceiver |
| 1.3.6.1.4.1.20044.121.9.1.4.1.8 | Columnpmo1008mpCfgClientGridCurrentPortn | read-write | deprecated | Default Client transceiver Grid :This register configures the start-up laser grid of the client transceiver |
| 1.3.6.1.4.1.20044.121.9.1.4.1.9 | Columnpmo1008mpCfgClientFoPortn | read-write | deprecated | Default Client first Frequency :This register configures the start-up first frequency of the client transceiver |
| 1.3.6.1.4.1.20044.121.9.2 | Nodepmo1008mpCfgLabels | |||
| 1.3.6.1.4.1.20044.121.9.3 | Nodepmo1008mpCfgOther | |||
| 1.3.6.1.4.1.20044.121.9.3.1 | Nodepmo1008mptablemoduleOther | |||
| 1.3.6.1.4.1.20044.121.9.3.1.2 | Scalarpmo1008mpCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.121.9.4 | Nodepmo1008mpCfgLabelsClient | |||
| 1.3.6.1.4.1.20044.121.9.4.1 | Tablepmo1008mpCfgClientStartupLabelsTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.4.1.1 | Rowpmo1008mpCfgClientStartupLabelsEntry | not-accessible | current | Row definition for the labelsClient table |
| 1.3.6.1.4.1.20044.121.9.4.1.1.1 | Columnpmo1008mpCfgClientStartupLabelsIndex | read-only | current | Index definition for the clientStartupLabels table |
| 1.3.6.1.4.1.20044.121.9.4.1.1.3 | Columnpmo1008mpCfgLabelClientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.121.9.5 | Nodepmo1008mpCfgLabelsLine | |||
| 1.3.6.1.4.1.20044.121.9.5.1 | Tablepmo1008mpCfgLineStartupLabelsTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.5.1.1 | Rowpmo1008mpCfgLineStartupLabelsEntry | not-accessible | current | Row definition for the labelsLine table |
| 1.3.6.1.4.1.20044.121.9.5.1.1.1 | Columnpmo1008mpCfgLineStartupLabelsIndex | read-only | current | Index definition for the lineStartupLabels table |
| 1.3.6.1.4.1.20044.121.9.5.1.1.3 | Columnpmo1008mpCfgLabelLinePortn | read-write | current | Default settings on the label of the Lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.121.9.6 | Nodepmo1008mpCfgStartuptimeslotsline1 | |||
| 1.3.6.1.4.1.20044.121.9.6.1 | Tablepmo1008mpCfgTimeslotsportsline1Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.6.1.1 | Rowpmo1008mpCfgTimeslotsportsline1Entry | not-accessible | current | Row definition for the startuptimeslotsline1 table |
| 1.3.6.1.4.1.20044.121.9.6.1.1.1 | Columnpmo1008mpCfgTimeslotsportsline1Index | read-only | current | Index definition for the timeslotsportsline1 table |
| 1.3.6.1.4.1.20044.121.9.6.1.1.3 | Columnpmo1008mpCfgLine1Timeslotb2PortPortn | read-write | current | Port Defaut Time Slot allocation (MSB) on Line1 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.121.9.6.1.1.4 | Columnpmo1008mpCfgLine1Timeslotb1PortPortn | read-write | current | Port Defaut Time Slot allocation (LSB) on Line1 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.121.9.6.1.1.5 | Columnpmo1008mpCfgLine1ProtocolPortPortn | read-write | current | Port Defaut Protocol on Line1 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.121.9.7 | Nodepmo1008mpCfgStartuptimeslotsline2 | |||
| 1.3.6.1.4.1.20044.121.9.7.1 | Tablepmo1008mpCfgTimeslotsportsline2Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.7.1.1 | Rowpmo1008mpCfgTimeslotsportsline2Entry | not-accessible | current | Row definition for the startuptimeslotsline2 table |
| 1.3.6.1.4.1.20044.121.9.7.1.1.1 | Columnpmo1008mpCfgTimeslotsportsline2Index | read-only | current | Index definition for the timeslotsportsline2 table |
| 1.3.6.1.4.1.20044.121.9.7.1.1.3 | Columnpmo1008mpCfgLine2Timeslotb2PortPortn | read-write | current | Port Defaut Time Slot allocation (MSB) on Line2 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.121.9.7.1.1.4 | Columnpmo1008mpCfgLine2Timeslotb1PortPortn | read-write | current | Port Defaut Time Slot allocation (LSB) on Line2 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.121.9.7.1.1.5 | Columnpmo1008mpCfgLine2ProtocolPortPortn | read-write | current | Port Defaut Protocol on Line2 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.121.9.8 | Nodepmo1008mpCfgStartuptimeslotspassthroughline1 | |||
| 1.3.6.1.4.1.20044.121.9.8.1 | Tablepmo1008mpCfgTimeslotspassthroughline1Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.8.1.1 | Rowpmo1008mpCfgTimeslotspassthroughline1Entry | not-accessible | current | Row definition for the startuptimeslotspassthroughline1 table |
| 1.3.6.1.4.1.20044.121.9.8.1.1.1 | Columnpmo1008mpCfgTimeslotspassthroughline1Index | read-only | current | Index definition for the timeslotspassthroughline1 table |
| 1.3.6.1.4.1.20044.121.9.8.1.1.3 | Columnpmo1008mpCfgLine1Timeslotb2PassthroughPortn | read-write | current | Port Defaut PassThrough Time Slot allocation (MSB) on Line1 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.121.9.8.1.1.4 | Columnpmo1008mpCfgLine1Timeslotb1PassthroughPortn | read-write | current | Port Defaut PassThroughTime Slot allocation (LSB) on Line1 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.121.9.8.1.1.5 | Columnpmo1008mpCfgLine1ProtocolPassthroughPortn | read-write | current | Port Defaut PassThrough Protocol on Line1 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.121.9.9 | Nodepmo1008mpCfgStartuptimeslotspassthroughline2 | |||
| 1.3.6.1.4.1.20044.121.9.9.1 | Tablepmo1008mpCfgTimeslotspassthroughline2Table | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.9.1.1 | Rowpmo1008mpCfgTimeslotspassthroughline2Entry | not-accessible | current | Row definition for the startuptimeslotspassthroughline2 table |
| 1.3.6.1.4.1.20044.121.9.9.1.1.1 | Columnpmo1008mpCfgTimeslotspassthroughline2Index | read-only | current | Index definition for the timeslotspassthroughline2 table |
| 1.3.6.1.4.1.20044.121.9.9.1.1.3 | Columnpmo1008mpCfgLine2Timeslotb2PassthroughPortn | read-write | current | Port Defaut PassThrough Time Slot allocation (MSB) on Line2 :This register configures the start-up timeslots allocation on the port (MSB) |
| 1.3.6.1.4.1.20044.121.9.9.1.1.4 | Columnpmo1008mpCfgLine2Timeslotb1PassthroughPortn | read-write | current | Port Defaut PassThroughTime Slot allocation (LSB) on Line2 :This register configures the start-up timeslots allocation on the port (LSB) |
| 1.3.6.1.4.1.20044.121.9.9.1.1.5 | Columnpmo1008mpCfgLine2ProtocolPassthroughPortn | read-write | current | Port Defaut PassThrough Protocol on Line2 :This register configures the start-up protocol on the port |
| 1.3.6.1.4.1.20044.121.9.11 | Nodepmo1008mpCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.121.9.11.1 | Tablepmo1008mpCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.121.9.11.1.1 | Rowpmo1008mpCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.121.9.11.1.1.1 | Columnpmo1008mpCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.121.9.11.1.1.3 | Columnpmo1008mpCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.121.9.11.1.1.4 | Columnpmo1008mpCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.121.9.11.1.1.5 | Columnpmo1008mpCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.121.9.11.1.1.6 | Columnpmo1008mpCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.121.9.11.1.1.7 | Columnpmo1008mpCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.121.9.257 | Scalarpmo1008mpCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.121.10 | Nodepmo1008mptraps | |||
| 1.3.6.1.4.1.20044.121.10.2 | Scalarpmo1008mptrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.121.10.3 | Scalarpmo1008mptrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.121.10.4 | Scalarpmo1008mptrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.121.10.30 | Notificationpmo1008mpLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.121.10.31 | Notificationpmo1008mpLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.121.10.32 | Notificationpmo1008mpLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.121.10.33 | Notificationpmo1008mpLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.121.10.34 | Notificationpmo1008mpLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.121.10.35 | Notificationpmo1008mpLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.121.10.40 | Notificationpmo1008mpClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.121.10.41 | Notificationpmo1008mpClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.121.10.42 | Notificationpmo1008mpClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.121.10.43 | Notificationpmo1008mpClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.121.10.44 | Notificationpmo1008mpClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.121.10.45 | Notificationpmo1008mpClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.121.10.50 | Notificationpmo1008mpPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.121.10.51 | Notificationpmo1008mpPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.121.11 | Nodepmo1008mpMonitoring | |||
| 1.3.6.1.4.1.20044.121.11.1 | Nodepmo1008mpMonOther | |||
| 1.3.6.1.4.1.20044.121.11.1.3 | Nodepmo1008mpMonRmon | |||
| 1.3.6.1.4.1.20044.121.11.1.3.359 | Scalarpmo1008mpMonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.121.11.1.3.360 | Scalarpmo1008mpMonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.121.11.2 | Nodepmo1008mpMonClient | |||
| 1.3.6.1.4.1.20044.121.11.2.4 | Nodepmo1008mpMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.121.11.2.4.16 | Tablepmo1008mpMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pmo1008mpMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.16.1 | Rowpmo1008mpMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.16.1.1 | Columnpmo1008mpMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.16.1.2 | Columnpmo1008mpMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.121.11.2.4.16.1.3 | Columnpmo1008mpMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.16.1.4 | Columnpmo1008mpMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.32 | Tablepmo1008mpMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pmo1008mpMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.32.1 | Rowpmo1008mpMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.32.1.1 | Columnpmo1008mpMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.32.1.2 | Columnpmo1008mpMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a FCS error is detected on the client port <Help> This counter gives the number of CRC Errors rece… |
| 1.3.6.1.4.1.20044.121.11.2.4.32.1.3 | Columnpmo1008mpMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.32.1.4 | Columnpmo1008mpMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.48 | Tablepmo1008mpMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pmo1008mpMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.48.1 | Rowpmo1008mpMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.48.1.1 | Columnpmo1008mpMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.48.1.2 | Columnpmo1008mpMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.121.11.2.4.48.1.3 | Columnpmo1008mpMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.48.1.4 | Columnpmo1008mpMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.64 | Tablepmo1008mpMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pmo1008mpMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.64.1 | Rowpmo1008mpMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.64.1.1 | Columnpmo1008mpMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.64.1.2 | Columnpmo1008mpMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.121.11.2.4.64.1.3 | Columnpmo1008mpMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.64.1.4 | Columnpmo1008mpMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.80 | Tablepmo1008mpMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pmo1008mpMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.80.1 | Rowpmo1008mpMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.80.1.1 | Columnpmo1008mpMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.80.1.2 | Columnpmo1008mpMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.121.11.2.4.80.1.3 | Columnpmo1008mpMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.80.1.4 | Columnpmo1008mpMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.96 | Tablepmo1008mpMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pmo1008mpMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.96.1 | Rowpmo1008mpMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.96.1.1 | Columnpmo1008mpMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.96.1.2 | Columnpmo1008mpMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.121.11.2.4.96.1.3 | Columnpmo1008mpMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.96.1.4 | Columnpmo1008mpMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.224 | Tablepmo1008mpMondwRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pmo1008mpMondwRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.224.1 | Rowpmo1008mpMondwRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMondwRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.224.1.1 | Columnpmo1008mpMondwRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMondwRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.224.1.2 | Columnpmo1008mpMondwRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a FCS error is detected on the output client port <Help> This counter gives the number of CRC Err… |
| 1.3.6.1.4.1.20044.121.11.2.4.224.1.3 | Columnpmo1008mpMondwRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | Output B1/FCS Errors Counter Error :This OID when set indicates the output B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.224.1.4 | Columnpmo1008mpMondwRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | Output B1/FCS Errors Counter Overload :This OID when set indicates an output B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.240 | Tablepmo1008mpMondwRmonPacketsCounterClientInputTable | not-accessible | current | List of pmo1008mpMondwRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.121.11.2.4.240.1 | Rowpmo1008mpMondwRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pmo1008mpMondwRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.240.1.1 | Columnpmo1008mpMondwRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pmo1008mpMondwRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.121.11.2.4.240.1.2 | Columnpmo1008mpMondwRmonPacketsCounterClientInputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packets transmit… |
| 1.3.6.1.4.1.20044.121.11.2.4.240.1.3 | Columnpmo1008mpMondwRmonPacketsCounterClientInputErrorPortn | read-only | current | Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.121.11.2.4.240.1.4 | Columnpmo1008mpMondwRmonPacketsCounterClientInputOverloadPortn | read-only | current | Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port |
| 1.3.6.1.4.1.20044.121.11.5 | Nodepmo1008mpMonPerfOther | |||
| 1.3.6.1.4.1.20044.121.11.5.1 | Nodepmo1008mpMonPerfSync | |||
| 1.3.6.1.4.1.20044.121.11.5.1.257 | Scalarpmo1008mpPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.121.11.5.1.259 | Scalarpmo1008mpPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.121.11.5.1.260 | Scalarpmo1008mpPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.121.11.5.2 | Nodepmo1008mpMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.121.11.5.2.1 | Scalarpmo1008mpPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.121.11.5.2.2 | Scalarpmo1008mpPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.121.11.5.2.5 | Scalarpmo1008mpPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.121.11.5.2.6 | Scalarpmo1008mpPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.121.11.5.2.7 | Scalarpmo1008mpPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.121.11.5.2.8 | Scalarpmo1008mpPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.121.11.6 | Nodepmo1008mpMonPerfClient | |||
| 1.3.6.1.4.1.20044.121.11.6.16 | Tablepmo1008mpPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pmo1008mpPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.121.11.6.16.1 | Rowpmo1008mpPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.6.16.1.1 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.6.16.1.2 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.16.1.3 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.16.1.4 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.16.1.5 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.16.1.6 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.16.1.7 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.16.1.8 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.16.1.9 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.16.1.10 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.16.1.11 | Columnpmo1008mpPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.32 | Tablepmo1008mpPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.6.32.1 | Rowpmo1008mpPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.32.1.1 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.32.1.2 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.32.1.3 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.32.1.4 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.32.1.5 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.32.1.6 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.32.1.7 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.32.1.8 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.32.1.9 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.32.1.10 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.32.1.11 | Columnpmo1008mpPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.48 | Tablepmo1008mpPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pmo1008mpPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.121.11.6.48.1 | Rowpmo1008mpPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.6.48.1.1 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.6.48.1.2 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.48.1.3 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.48.1.4 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.48.1.5 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.48.1.6 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.48.1.7 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.48.1.8 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.48.1.9 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.48.1.10 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.48.1.11 | Columnpmo1008mpPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.64 | Tablepmo1008mpPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.6.64.1 | Rowpmo1008mpPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.64.1.1 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.64.1.2 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.64.1.3 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.64.1.4 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.64.1.5 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.64.1.6 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.64.1.7 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.64.1.8 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.64.1.9 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.64.1.10 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.64.1.11 | Columnpmo1008mpPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.80 | Tablepmo1008mpPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pmo1008mpPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.121.11.6.80.1 | Rowpmo1008mpPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.6.80.1.1 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.6.80.1.2 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.80.1.3 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.80.1.4 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.80.1.5 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.80.1.6 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.80.1.7 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.80.1.8 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.80.1.9 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.80.1.10 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.80.1.11 | Columnpmo1008mpPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.96 | Tablepmo1008mpPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.6.96.1 | Rowpmo1008mpPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.96.1.1 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.96.1.2 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.96.1.3 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.96.1.4 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.96.1.5 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.96.1.6 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.96.1.7 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.96.1.8 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.96.1.9 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.96.1.10 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.96.1.11 | Columnpmo1008mpPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.112 | Tablepmo1008mpPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pmo1008mpPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.121.11.6.112.1 | Rowpmo1008mpPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.6.112.1.1 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.6.112.1.2 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.112.1.3 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.112.1.4 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.112.1.5 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.112.1.6 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.112.1.7 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.112.1.8 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.112.1.9 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.112.1.10 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.112.1.11 | Columnpmo1008mpPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.128 | Tablepmo1008mpPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.6.128.1 | Rowpmo1008mpPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.128.1.1 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.128.1.2 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.128.1.3 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.6.128.1.4 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.128.1.5 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.128.1.6 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.128.1.7 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.128.1.8 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.128.1.9 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.128.1.10 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.128.1.11 | Columnpmo1008mpPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.6.432 | Tablepmo1008mpPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pmo1008mpPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.121.11.6.432.1 | Rowpmo1008mpPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.6.432.1.1 | Columnpmo1008mpPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pmo1008mpPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.6.432.1.4 | Columnpmo1008mpperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.432.1.5 | Columnpmo1008mpperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.432.1.6 | Columnpmo1008mpperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.432.1.7 | Columnpmo1008mpperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.121.11.6.432.1.28 | Columnpmo1008mpperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.432.1.29 | Columnpmo1008mpperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.432.1.30 | Columnpmo1008mpperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.432.1.31 | Columnpmo1008mpperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.121.11.6.448 | Tablepmo1008mpPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.6.448.1 | Rowpmo1008mpPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.448.1.1 | Columnpmo1008mpPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.448.1.4 | Columnpmo1008mpperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.448.1.5 | Columnpmo1008mpperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.448.1.6 | Columnpmo1008mpperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.448.1.7 | Columnpmo1008mpperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.121.11.6.448.1.28 | Columnpmo1008mpperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.448.1.29 | Columnpmo1008mpperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.448.1.30 | Columnpmo1008mpperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.448.1.31 | Columnpmo1008mpperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.121.11.6.464 | Tablepmo1008mpPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pmo1008mpPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.121.11.6.464.1 | Rowpmo1008mpPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.6.464.1.1 | Columnpmo1008mpPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pmo1008mpPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.6.464.1.4 | Columnpmo1008mpperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.464.1.5 | Columnpmo1008mpperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.464.1.6 | Columnpmo1008mpperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.464.1.7 | Columnpmo1008mpperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.121.11.6.464.1.28 | Columnpmo1008mpperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.464.1.29 | Columnpmo1008mpperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.464.1.30 | Columnpmo1008mpperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.464.1.31 | Columnpmo1008mpperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.121.11.6.480 | Tablepmo1008mpPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.6.480.1 | Rowpmo1008mpPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.480.1.1 | Columnpmo1008mpPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.6.480.1.4 | Columnpmo1008mpperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.480.1.5 | Columnpmo1008mpperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.480.1.6 | Columnpmo1008mpperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.480.1.7 | Columnpmo1008mpperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.121.11.6.480.1.28 | Columnpmo1008mpperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.480.1.29 | Columnpmo1008mpperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.121.11.6.480.1.30 | Columnpmo1008mpperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.121.11.6.480.1.31 | Columnpmo1008mpperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.121.11.7 | Nodepmo1008mpMonPerfLine | |||
| 1.3.6.1.4.1.20044.121.11.7.192 | Tablepmo1008mpPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pmo1008mpPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.121.11.7.192.1 | Rowpmo1008mpPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.7.192.1.1 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.7.192.1.2 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.192.1.3 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.192.1.4 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.192.1.5 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.192.1.6 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.192.1.7 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.192.1.8 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.192.1.9 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.192.1.10 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.192.1.11 | Columnpmo1008mpPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.193 | Tablepmo1008mpPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.7.193.1 | Rowpmo1008mpPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.193.1.1 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.193.1.2 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.193.1.3 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.193.1.4 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.193.1.5 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.193.1.6 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.193.1.7 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.193.1.8 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.193.1.9 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.193.1.10 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.193.1.11 | Columnpmo1008mpPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.194 | Tablepmo1008mpPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pmo1008mpPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.121.11.7.194.1 | Rowpmo1008mpPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.7.194.1.1 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.7.194.1.2 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.194.1.3 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.194.1.4 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.194.1.5 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.194.1.6 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.194.1.7 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.194.1.8 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.194.1.9 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.194.1.10 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.194.1.11 | Columnpmo1008mpPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.195 | Tablepmo1008mpPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.7.195.1 | Rowpmo1008mpPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.195.1.1 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.195.1.2 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.195.1.3 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.195.1.4 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.195.1.5 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.195.1.6 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.195.1.7 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.195.1.8 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.195.1.9 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.195.1.10 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.195.1.11 | Columnpmo1008mpPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.208 | Tablepmo1008mpPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pmo1008mpPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.121.11.7.208.1 | Rowpmo1008mpPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.7.208.1.1 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.121.11.7.208.1.2 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.208.1.3 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.208.1.4 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.208.1.5 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.208.1.6 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.208.1.7 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.209 | Tablepmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.7.209.1 | Rowpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.209.1.1 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.209.1.2 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.209.1.3 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.209.1.4 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.209.1.5 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.209.1.6 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.209.1.7 | Columnpmo1008mpPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.210 | Tablepmo1008mpPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pmo1008mpPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.121.11.7.210.1 | Rowpmo1008mpPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.7.210.1.1 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pmo1008mpPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.121.11.7.210.1.2 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.210.1.3 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.210.1.4 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.210.1.5 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.210.1.6 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.210.1.7 | Columnpmo1008mpPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.211 | Tablepmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pmo1008mpPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.121.11.7.211.1 | Rowpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo1008mpPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.211.1.1 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo1008mpPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.121.11.7.211.1.2 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.211.1.3 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.121.11.7.211.1.4 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.211.1.5 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.121.11.7.211.1.6 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.121.11.7.211.1.7 | Columnpmo1008mpPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pmo1008mpClientChannel | INTEGER | current | Channel selection on transceiver Client ports |
| Pmo1008mpClientProtocol | INTEGER { protocolclientoc3(10), protocolclientoc12(11), protocolclientoc48(4), protocolclient1GbE(1) } | current | Different values on the protocol on the client ports |
| Pmo1008mpDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pmo1008mpLineChannel | INTEGER | current | Channel selection on transceiver Line ports |
| Pmo1008mpOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on client and line ports |