EKINOPS-Pmo5005-MIB
732 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.119 | IdentitymodulePmo5005 | Creation. | ||
| 1.3.6.1.4.1.20044.119.2 | Nodepmo5005alarms | |||
| 1.3.6.1.4.1.20044.119.2.1 | Nodepmo5005AlmOther | |||
| 1.3.6.1.4.1.20044.119.2.1.1 | Nodepmo5005AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.119.2.1.1.2 | Nodepmo5005AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.119.2.1.1.2.1 | Scalarpmo5005AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.119.2.1.1.2.2 | Scalarpmo5005AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.119.2.1.1.2.3 | Scalarpmo5005AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.119.2.1.1.2.4 | Scalarpmo5005AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.119.2.1.2 | Nodepmo5005AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.119.2.1.3 | Nodepmo5005AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.119.2.1.3.0 | Nodepmo5005AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.119.2.1.3.0.9 | Scalarpmo5005AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.119.2.1.3.0.15 | Scalarpmo5005AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.119.2.1.3.0.16 | Scalarpmo5005AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.119.2.2 | Nodepmo5005AlmClient | |||
| 1.3.6.1.4.1.20044.119.2.2.1 | Nodepmo5005AlmClientNurg | |||
| 1.3.6.1.4.1.20044.119.2.2.1.232 | Tablepmo5005AlmclientSfpWarnDdmTable | not-accessible | current | List of pmo5005AlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1 | Rowpmo5005AlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pmo5005AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.1 | Columnpmo5005AlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pmo5005AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.2 | Columnpmo5005AlmClientTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Optical Module ouput power is lower than the threshold value written in the Optical Module EEPRO… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.3 | Columnpmo5005AlmClientTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Optical Module ouput power is higher than the threshold value written in the Optical Module EEP… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.4 | Columnpmo5005AlmClientTxBiasLowWngPortn | read-only | current | Client Optical Module Bias Low Warning :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.5 | Columnpmo5005AlmClientTxBiasHighWngPortn | read-only | current | Client Optical Module Bias High Warning :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.6 | Columnpmo5005AlmClientVccLowWngPortn | read-only | current | Client Optical Module power Supply Low Warning :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.7 | Columnpmo5005AlmClientVccHighWngPortn | read-only | current | Client Optical Module power Supply High Warning :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Opti… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.8 | Columnpmo5005AlmClientTempLowWngPortn | read-only | current | Client Optical Module Temp Low Warning :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.9 | Columnpmo5005AlmClientTempHighWngPortn | read-only | current | Client Optical Module Temp High Warning :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.16 | Columnpmo5005AlmClientRxPwrLowWngPortn | read-only | current | Client Optical Module Rx Power Low Warning :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.119.2.2.1.232.1.17 | Columnpmo5005AlmClientRxPwrHighWngPortn | read-only | current | Client Optical Module Rx Power High Warning :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical M… |
| 1.3.6.1.4.1.20044.119.2.2.2 | Nodepmo5005AlmClientUrg | |||
| 1.3.6.1.4.1.20044.119.2.2.2.88 | Tablepmo5005AlmclientHostLaneFaultTable | not-accessible | current | List of pmo5005AlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.119.2.2.2.88.1 | Rowpmo5005AlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pmo5005AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.119.2.2.2.88.1.1 | Columnpmo5005AlmclientHostLaneFaultIndex | read-only | current | Index definition for the pmo5005AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.119.2.2.2.88.1.2 | Columnpmo5005AlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.119.2.2.2.88.1.3 | Columnpmo5005AlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Optical Module <Help> Alarm indicating a Loss of Signal is detected … |
| 1.3.6.1.4.1.20044.119.2.2.2.88.1.7 | Columnpmo5005AlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> Alarm indicating a Client Signal… |
| 1.3.6.1.4.1.20044.119.2.2.2.216 | Tablepmo5005AlmclientSfpAlmDdmTable | not-accessible | current | List of pmo5005AlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1 | Rowpmo5005AlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pmo5005AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.1 | Columnpmo5005AlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pmo5005AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.2 | Columnpmo5005AlmClientTxPwrLowAlaPortn | read-only | current | Client Optical Module Tx Power Low Alarm :This OID indicates that the Optical Module output power is lower than the threshold value written in the Optical Modu… |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.3 | Columnpmo5005AlmClientTxPwrHighAlaPortn | read-only | current | Client Optical Module Tx Power High Alarm :This OID indicates that the Optical Module output power is higher than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.4 | Columnpmo5005AlmClientTxBiasLowAlaPortn | read-only | current | Client Optical Module Bias Low Alarm :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.5 | Columnpmo5005AlmClientTxBiasHighAlaPortn | read-only | current | Client Optical Module Bias High Alarm :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.6 | Columnpmo5005AlmClientVccLowAlaPortn | read-only | current | Client Optical Module Power Supply Low Alarm :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.7 | Columnpmo5005AlmClientVccHighAlaPortn | read-only | current | Client Optical Module Power Supply High Alarm :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.8 | Columnpmo5005AlmClientTempLowAlaPortn | read-only | current | Client Optical Module Temp Low Alarm :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.9 | Columnpmo5005AlmClientTempHighAlaPortn | read-only | current | Client Optical Module Temp High Alarm :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.16 | Columnpmo5005AlmClientRxPwrLowAlaPortn | read-only | current | Client Optical Module Rx Power Low Alarm :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.119.2.2.2.216.1.17 | Columnpmo5005AlmClientRxPwrHighAlaPortn | read-only | current | Client Optical Module Rx Power High Alarm :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.119.2.2.3 | Nodepmo5005AlmClientCrit | |||
| 1.3.6.1.4.1.20044.119.2.2.3.8 | Tablepmo5005AlmsynthAlmPortTable | not-accessible | current | List of pmo5005AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1 | Rowpmo5005AlmsynthAlmPortEntry | not-accessible | current | Row definition for the pmo5005AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.1 | Columnpmo5005AlmsynthAlmPortIndex | read-only | current | Index definition for the pmo5005AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.2 | Columnpmo5005AlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the optical Module is not present in the client port. <Help> Alarm indicating Line Optical Module is not … |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.5 | Columnpmo5005AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.6 | Columnpmo5005AlmDwLsdPortn | read-only | current | Client Optical Module Laser Shutdown :This OID indicates the Client Optical Module laser is shutdown. <Help> Line interface transmit state <Condtype> DW_LSD_1 … |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.7 | Columnpmo5005AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> client port service state : In Servi… |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.8 | Columnpmo5005AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.9 | Columnpmo5005AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> Client Alarm Indication Signal insertion status on the clien… |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.10 | Columnpmo5005AlmSfpDdmWarningPortn | read-only | current | Warning On Client Optical Module DDM :This OID indicates a warning is being received from the Client Optical Module DDM <Help> A DDM Warningis detected on the … |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.11 | Columnpmo5005AlmSfpDdmAlmPortn | read-only | current | Alarm On Client Optical Module DDM :This OID indicates an alarm is being received from the Client Optical Module DDM <Help> A DDM Alarm is detected on the clie… |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.13 | Columnpmo5005AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.14 | Columnpmo5005AlmClientLoopbackOnPortn | read-only | current | Client Loopback Enabled :This OID indicates a loopback is enabled on the port.<Help> Alarm indicating a loopback is enabled on the port <Condtype> CLIENT_LOOPB… |
| 1.3.6.1.4.1.20044.119.2.2.3.8.1.17 | Columnpmo5005AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> Client Signal Fail insertion status on the line sig… |
| 1.3.6.1.4.1.20044.119.2.3 | Nodepmo5005AlmLine | |||
| 1.3.6.1.4.1.20044.119.2.3.1 | Nodepmo5005AlmLineNurg | |||
| 1.3.6.1.4.1.20044.119.2.3.2 | Nodepmo5005AlmLineUrg | |||
| 1.3.6.1.4.1.20044.119.2.3.2.104 | Tablepmo5005AlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pmo5005AlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1 | Rowpmo5005AlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pmo5005AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.1 | Columnpmo5005AlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pmo5005AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.2 | Columnpmo5005AlmLineTxPwrLowAlaPortn | read-only | current | Line Optical Module Tx Power Low Alarm :This OID indicates that the Optical Module ouput power is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.3 | Columnpmo5005AlmLineTxPwrHighAlaPortn | read-only | current | Line Optical Module Tx Power High Alarm :This OID indicates that the Optical Module ouput power is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.4 | Columnpmo5005AlmLineTxBiasLowAlaPortn | read-only | current | Line Optical Module Bias Low Alarm :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical Modu… |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.5 | Columnpmo5005AlmLineTxBiasHighAlaPortn | read-only | current | Line Optical Module Bias High Alarm :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.6 | Columnpmo5005AlmLineVccLowAlaPortn | read-only | current | Line Optical Module power Supply Low Alarm :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.7 | Columnpmo5005AlmLineVccHighAlaPortn | read-only | current | Line Optical Module power Supply High Alarm :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.8 | Columnpmo5005AlmLineTempLowAlaPortn | read-only | current | Line Optical Module Temp Low Alarm :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module EEPR… |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.9 | Columnpmo5005AlmLineTempHighAlaPortn | read-only | current | Line Optical Module Temp High Alarm :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.16 | Columnpmo5005AlmLineRxPwrLowAlaPortn | read-only | current | Line Optical Module Rx Power Low Alarm :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.119.2.3.2.104.1.17 | Columnpmo5005AlmLineRxPwrHighAlaPortn | read-only | current | Line Optical Module Rx Power High Alarm :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.119.2.3.2.120 | Tablepmo5005AlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pmo5005AlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1 | Rowpmo5005AlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pmo5005AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.1 | Columnpmo5005AlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pmo5005AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.2 | Columnpmo5005AlmLineTxPwLowWngPortn | read-only | current | Line Optical Module Tx Power Low Warning :This OID indicates that the Optical Module ouput power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.3 | Columnpmo5005AlmLineTxPwrHighWngPortn | read-only | current | Line Optical Module Tx Power High Warning :This OID indicates that the Optical Module ouput power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.4 | Columnpmo5005AlmLineTxBiasLowWngPortn | read-only | current | Line Optical Module Bias Low Warning :This OID indicates that the Optical Module laser bias current is lower than the threshold value written in the Optical Mo… |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.5 | Columnpmo5005AlmLineTxBiasHighWngPortn | read-only | current | Line Optical Module Bias High Warning :This OID indicates that the Optical Module laser bias current is higher than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.6 | Columnpmo5005AlmLineVccLowWngPortn | read-only | current | Line Optical Module power Supply Low Warning :This OID indicates that the Optical Module power supply is lower than the threshold value written in the Optical … |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.7 | Columnpmo5005AlmLineVccHighWngPortn | read-only | current | Line Optical Module power Supply High Warning :This OID indicates that the Optical Module power supply is higher than the threshold value written in the Optica… |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.8 | Columnpmo5005AlmLineTempLowWngPortn | read-only | current | Line Optical Module Temp Low Warning :This OID indicates that the Optical Module temperature is lower than the threshold value written in the Optical Module EE… |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.9 | Columnpmo5005AlmLineTempHighWngPortn | read-only | current | Line Optical Module Temp High Warning :This OID indicates that the Optical Module temperature is higher than the threshold value written in the Optical Module … |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.16 | Columnpmo5005AlmLineRxPwrLowWngPortn | read-only | current | Line Optical Module Rx Power Low Warning :This OID indicates that the Optical Module input power is lower than the threshold value written in the Optical Modul… |
| 1.3.6.1.4.1.20044.119.2.3.2.120.1.17 | Columnpmo5005AlmLineRxPwrHighWngPortn | read-only | current | Line Optical Module Rx Power High Warning :This OID indicates that the Optical Module input power is higher than the threshold value written in the Optical Mod… |
| 1.3.6.1.4.1.20044.119.2.3.2.152 | Tablepmo5005AlmlineHostLaneFaultTable | not-accessible | current | List of pmo5005AlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.119.2.3.2.152.1 | Rowpmo5005AlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pmo5005AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.119.2.3.2.152.1.1 | Columnpmo5005AlmlineHostLaneFaultIndex | read-only | current | Index definition for the pmo5005AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.119.2.3.2.152.1.2 | Columnpmo5005AlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Optical Module<Help> Alarm indicating a Loss of Signal is detected on th… |
| 1.3.6.1.4.1.20044.119.2.3.2.152.1.3 | Columnpmo5005AlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal<Help> Alarm indicating frame alignment errors on line interface … |
| 1.3.6.1.4.1.20044.119.2.3.2.152.1.4 | Columnpmo5005AlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal<Help> Alarm indicating a Backward Defect Indic… |
| 1.3.6.1.4.1.20044.119.2.3.2.152.1.5 | Columnpmo5005AlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal<Help> Alarm indicating a Backward Defect Indic… |
| 1.3.6.1.4.1.20044.119.2.3.3 | Nodepmo5005AlmLineCrit | |||
| 1.3.6.1.4.1.20044.119.2.3.3.24 | Tablepmo5005AlmsynthAlmLineTable | not-accessible | current | List of pmo5005AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1 | Rowpmo5005AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pmo5005AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.1 | Columnpmo5005AlmsynthAlmLineIndex | read-only | current | Index definition for the pmo5005AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.2 | Columnpmo5005AlmLineSfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the optical Module is not present in the line port. <Help> Alarm indicating Line Optical Module is not plug… |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.5 | Columnpmo5005AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.6 | Columnpmo5005AlmLineTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the Line Optical module laser is shutdown. <Help> Line interface transmit state <Condtype> LINE_TX_OFF <… |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.7 | Columnpmo5005AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) or Out of Service (2) <Help> line port service state : In Service (OFF) / Out Of … |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.10 | Columnpmo5005AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> A DDM Warningis detected on the line Opti… |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.11 | Columnpmo5005AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line Optical Module DDM. <Help> A DDM Alarm is detected on the line Opti… |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.13 | Columnpmo5005AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.119.2.3.3.24.1.14 | Columnpmo5005AlmLineLoopbackOnPortn | read-only | current | Line Loopback Enabled :This OID indicates a loopback is enabled on the port.<Help> Alarm indicating a loopback is enabled on the port <Condtype> LINE_LOOPBACK_… |
| 1.3.6.1.4.1.20044.119.3 | Nodepmo5005measures | |||
| 1.3.6.1.4.1.20044.119.3.1 | Nodepmo5005MesrOther | |||
| 1.3.6.1.4.1.20044.119.3.1.144 | Scalarpmo5005MesrmodulePwrConsumption | read-only | current | Module Power Consumption :This OID gives the Total Power consumption of the module with its Optical Modules (Power = AV_U16/100) (Unit = W)<Help> This Measure … |
| 1.3.6.1.4.1.20044.119.3.2 | Nodepmo5005MesrClient | |||
| 1.3.6.1.4.1.20044.119.3.2.16 | Tablepmo5005MesrclientTempTable | not-accessible | current | List of pmo5005MesrclientTemp Article |
| 1.3.6.1.4.1.20044.119.3.2.16.1 | Rowpmo5005MesrclientTempEntry | not-accessible | current | Row definition for the pmo5005MesrclientTemp table |
| 1.3.6.1.4.1.20044.119.3.2.16.1.1 | Columnpmo5005MesrclientTempIndex | read-only | current | Index definition for the pmo5005MesrclientTemp table |
| 1.3.6.1.4.1.20044.119.3.2.16.1.2 | Columnpmo5005MesrclientTempPortn | read-only | current | Client Optical Module Temperature :This OID gives the Laser temperature value of the Client Optical Module, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.119.3.2.32 | Tablepmo5005MesrclientTxBiasTable | not-accessible | current | List of pmo5005MesrclientTxBias Article |
| 1.3.6.1.4.1.20044.119.3.2.32.1 | Rowpmo5005MesrclientTxBiasEntry | not-accessible | current | Row definition for the pmo5005MesrclientTxBias table |
| 1.3.6.1.4.1.20044.119.3.2.32.1.1 | Columnpmo5005MesrclientTxBiasIndex | read-only | current | Index definition for the pmo5005MesrclientTxBias table |
| 1.3.6.1.4.1.20044.119.3.2.32.1.2 | Columnpmo5005MesrclientTxBiasPortn | read-only | current | Client Optical Module Laser Bias :This OID gives the Laser bias value of the Client Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.119.3.2.48 | Tablepmo5005MesrclientTxPwrTable | not-accessible | current | List of pmo5005MesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.119.3.2.48.1 | Rowpmo5005MesrclientTxPwrEntry | not-accessible | current | Row definition for the pmo5005MesrclientTxPwr table |
| 1.3.6.1.4.1.20044.119.3.2.48.1.1 | Columnpmo5005MesrclientTxPwrIndex | read-only | current | Index definition for the pmo5005MesrclientTxPwr table |
| 1.3.6.1.4.1.20044.119.3.2.48.1.2 | Columnpmo5005MesrclientTxPwrPortn | read-only | current | Client Optical Module Tx Power :This OID gives the transmit power value of the Client Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Power … |
| 1.3.6.1.4.1.20044.119.3.2.64 | Tablepmo5005MesrclientRxPwrTable | not-accessible | current | List of pmo5005MesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.119.3.2.64.1 | Rowpmo5005MesrclientRxPwrEntry | not-accessible | current | Row definition for the pmo5005MesrclientRxPwr table |
| 1.3.6.1.4.1.20044.119.3.2.64.1.1 | Columnpmo5005MesrclientRxPwrIndex | read-only | current | Index definition for the pmo5005MesrclientRxPwr table |
| 1.3.6.1.4.1.20044.119.3.2.64.1.2 | Columnpmo5005MesrclientRxPwrPortn | read-only | current | Client Optical Module Rx Power :This OID gives the receive power value of the Client Optical Module, read in the DDM (Digital Diagnostic Monitoring) (Power = 1… |
| 1.3.6.1.4.1.20044.119.3.3 | Nodepmo5005MesrLine | |||
| 1.3.6.1.4.1.20044.119.3.3.80 | Tablepmo5005MesrlineTxPwrTable | not-accessible | current | List of pmo5005MesrlineTxPwr Article |
| 1.3.6.1.4.1.20044.119.3.3.80.1 | Rowpmo5005MesrlineTxPwrEntry | not-accessible | current | Row definition for the pmo5005MesrlineTxPwr table |
| 1.3.6.1.4.1.20044.119.3.3.80.1.1 | Columnpmo5005MesrlineTxPwrIndex | read-only | current | Index definition for the pmo5005MesrlineTxPwr table |
| 1.3.6.1.4.1.20044.119.3.3.80.1.2 | Columnpmo5005MesrlineTxPwrPortn | read-only | current | Line Optical Module Tx Power :This OID gives the Tx Laser transmit power value of the Line Optical Module, read in the DDM (Digital Diagnostic Monitoring) (Pow… |
| 1.3.6.1.4.1.20044.119.3.3.96 | Tablepmo5005MesrlineTempTable | not-accessible | current | List of pmo5005MesrlineTemp Article |
| 1.3.6.1.4.1.20044.119.3.3.96.1 | Rowpmo5005MesrlineTempEntry | not-accessible | current | Row definition for the pmo5005MesrlineTemp table |
| 1.3.6.1.4.1.20044.119.3.3.96.1.1 | Columnpmo5005MesrlineTempIndex | read-only | current | Index definition for the pmo5005MesrlineTemp table |
| 1.3.6.1.4.1.20044.119.3.3.96.1.2 | Columnpmo5005MesrlineTempPortn | read-only | current | Line Optical Module Temperature :This OID gives the Laser Temperature value of the Line Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Temp… |
| 1.3.6.1.4.1.20044.119.3.3.112 | Tablepmo5005MesrlineTxBiasTable | not-accessible | current | List of pmo5005MesrlineTxBias Article |
| 1.3.6.1.4.1.20044.119.3.3.112.1 | Rowpmo5005MesrlineTxBiasEntry | not-accessible | current | Row definition for the pmo5005MesrlineTxBias table |
| 1.3.6.1.4.1.20044.119.3.3.112.1.1 | Columnpmo5005MesrlineTxBiasIndex | read-only | current | Index definition for the pmo5005MesrlineTxBias table |
| 1.3.6.1.4.1.20044.119.3.3.112.1.2 | Columnpmo5005MesrlineTxBiasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the Tx Laser Bias value of the Line Optical Module, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV… |
| 1.3.6.1.4.1.20044.119.3.3.128 | Tablepmo5005MesrlineRxPwrTable | not-accessible | current | List of pmo5005MesrlineRxPwr Article |
| 1.3.6.1.4.1.20044.119.3.3.128.1 | Rowpmo5005MesrlineRxPwrEntry | not-accessible | current | Row definition for the pmo5005MesrlineRxPwr table |
| 1.3.6.1.4.1.20044.119.3.3.128.1.1 | Columnpmo5005MesrlineRxPwrIndex | read-only | current | Index definition for the pmo5005MesrlineRxPwr table |
| 1.3.6.1.4.1.20044.119.3.3.128.1.2 | Columnpmo5005MesrlineRxPwrPortn | read-only | current | Line Optical Module Rx Power :This OID gives the Receive power value of the Line Optical Module, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*lo… |
| 1.3.6.1.4.1.20044.119.4 | Nodepmo5005counters | |||
| 1.3.6.1.4.1.20044.119.4.1 | Nodepmo5005CntOther | |||
| 1.3.6.1.4.1.20044.119.4.2 | Nodepmo5005CntClient | |||
| 1.3.6.1.4.1.20044.119.4.2.64 | Tablepmo5005CntclientRemoteBipTable | not-accessible | current | List of pmo5005CntclientRemoteBip Article |
| 1.3.6.1.4.1.20044.119.4.2.64.1 | Rowpmo5005CntclientRemoteBipEntry | not-accessible | current | Row definition for the pmo5005CntclientRemoteBip table |
| 1.3.6.1.4.1.20044.119.4.2.64.1.1 | Columnpmo5005CntclientRemoteBipIndex | read-only | current | Index definition for the pmo5005CntclientRemoteBip table |
| 1.3.6.1.4.1.20044.119.4.2.64.1.2 | Columnpmo5005CntclientRemoteBipValuePortn | read-only | current | Client Output B1 Errors :This counter is increased each time a B1 error (OC192/STM64 Only) is detected on the Client path<Help> This counter gives the number o… |
| 1.3.6.1.4.1.20044.119.4.2.64.1.3 | Columnpmo5005CntclientRemoteBipErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.119.4.2.64.1.4 | Columnpmo5005CntclientRemoteBipOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a BIP8 error counter overload on Port |
| 1.3.6.1.4.1.20044.119.4.2.96 | Tablepmo5005CntclientCbipCounterTable | not-accessible | current | List of pmo5005CntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.119.4.2.96.1 | Rowpmo5005CntclientCbipCounterEntry | not-accessible | current | Row definition for the pmo5005CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.119.4.2.96.1.1 | Columnpmo5005CntclientCbipCounterIndex | read-only | current | Index definition for the pmo5005CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.119.4.2.96.1.2 | Columnpmo5005CntclientCbipCounterValuePortn | read-only | current | Client Input B1 Errors :This counter is incremented each time a B1 error (OC192/STM64 Only) is detected on the Client port<Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.119.4.2.96.1.3 | Columnpmo5005CntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.119.4.2.96.1.4 | Columnpmo5005CntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.119.4.3 | Nodepmo5005CntLine | |||
| 1.3.6.1.4.1.20044.119.4.3.192 | Tablepmo5005CntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pmo5005CntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.119.4.3.192.1 | Rowpmo5005CntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pmo5005CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.119.4.3.192.1.1 | Columnpmo5005CntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pmo5005CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.119.4.3.192.1.2 | Columnpmo5005CntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line SM BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (residua… |
| 1.3.6.1.4.1.20044.119.4.3.192.1.3 | Columnpmo5005CntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.119.4.3.192.1.4 | Columnpmo5005CntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.119.4.3.200 | Tablepmo5005CntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pmo5005CntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.119.4.3.200.1 | Rowpmo5005CntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pmo5005CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.119.4.3.200.1.1 | Columnpmo5005CntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pmo5005CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.119.4.3.200.1.2 | Columnpmo5005CntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line pre-FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC |
| 1.3.6.1.4.1.20044.119.4.3.200.1.3 | Columnpmo5005CntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.119.4.3.200.1.4 | Columnpmo5005CntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.119.4.3.216 | Tablepmo5005CntlineDfrmTimCntTable | not-accessible | current | List of pmo5005CntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.119.4.3.216.1 | Rowpmo5005CntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pmo5005CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.119.4.3.216.1.1 | Columnpmo5005CntlineDfrmTimCntIndex | read-only | current | Index definition for the pmo5005CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.119.4.3.216.1.2 | Columnpmo5005CntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.119.4.3.216.1.3 | Columnpmo5005CntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.119.4.3.216.1.4 | Columnpmo5005CntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.119.4.259 | Scalarpmo5005CntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.119.4.260 | Scalarpmo5005CntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.119.6 | Nodepmo5005controlsWrite | |||
| 1.3.6.1.4.1.20044.119.6.1 | Nodepmo5005CtrlOther | |||
| 1.3.6.1.4.1.20044.119.6.1.1 | Nodepmo5005CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.119.6.1.1.1 | Scalarpmo5005CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.119.6.1.1.2 | Scalarpmo5005CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.119.6.1.1.10 | Scalarpmo5005CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.119.6.1.1.14 | Scalarpmo5005CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.119.6.1.4 | Nodepmo5005Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.119.6.1.4.1 | Scalarpmo5005CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.119.6.1.4.2 | Scalarpmo5005CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.119.6.1.5 | Nodepmo5005CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.119.6.1.5.2 | Scalarpmo5005CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.119.6.1.5.3 | Scalarpmo5005CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.119.6.1.5.5 | Scalarpmo5005CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.119.6.1.5.6 | Scalarpmo5005CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.119.6.1.6 | Nodepmo5005CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.119.6.1.6.1 | Scalarpmo5005CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.119.6.1.6.5 | Scalarpmo5005CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.119.6.1.6.6 | Scalarpmo5005CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.119.6.1.6.7 | Scalarpmo5005CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.119.6.1.6.8 | Scalarpmo5005CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.119.6.1.192 | Nodepmo5005CtrlledTest | |||
| 1.3.6.1.4.1.20044.119.6.1.192.1 | Scalarpmo5005CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.119.6.1.192.2 | Scalarpmo5005CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.119.6.1.192.3 | Scalarpmo5005CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.119.6.2 | Nodepmo5005CtrlClient | |||
| 1.3.6.1.4.1.20044.119.6.2.16 | Tablepmo5005CtrlaccessLoopTable | not-accessible | current | List of pmo5005CtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.119.6.2.16.1 | Rowpmo5005CtrlaccessLoopEntry | not-accessible | current | Row definition for the pmo5005CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.119.6.2.16.1.1 | Columnpmo5005CtrlaccessLoopIndex | read-only | current | Index definition for the pmo5005CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.119.6.2.16.1.2 | Columnpmo5005CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID enables the Client Facility Loopback, looping the client signal input on the output. <Help> This control enables the Client … |
| 1.3.6.1.4.1.20044.119.6.2.17 | Tablepmo5005CtrlclientLoopToLineTable | not-accessible | current | List of pmo5005CtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.119.6.2.17.1 | Rowpmo5005CtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pmo5005CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.119.6.2.17.1.1 | Columnpmo5005CtrlclientLoopToLineIndex | read-only | current | Index definition for the pmo5005CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.119.6.2.17.1.2 | Columnpmo5005CtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID enables the Client Terminal Loopback, looping the client output signal on the input. <Help> This control enables the Client … |
| 1.3.6.1.4.1.20044.119.6.2.262 | Tablepmo5005CtrlclientResetAllCountTable | not-accessible | current | List of pmo5005CtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.119.6.2.262.1 | Rowpmo5005CtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pmo5005CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.119.6.2.262.1.1 | Columnpmo5005CtrlclientResetAllCountIndex | read-only | current | Index definition for the pmo5005CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.119.6.2.262.1.2 | Columnpmo5005CtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.119.6.3 | Nodepmo5005CtrlLine | |||
| 1.3.6.1.4.1.20044.119.6.3.64 | Tablepmo5005CtrlcommAccessLoopTable | not-accessible | current | List of pmo5005CtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.119.6.3.64.1 | Rowpmo5005CtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pmo5005CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.119.6.3.64.1.1 | Columnpmo5005CtrlcommAccessLoopIndex | read-only | current | Index definition for the pmo5005CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.119.6.3.64.1.2 | Columnpmo5005CtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID enables the Line Terminal loopback, looping the line output signal on the input. <Help> This control enables the Line Terminal… |
| 1.3.6.1.4.1.20044.119.6.3.66 | Tablepmo5005CtrllineLoopTable | not-accessible | current | List of pmo5005CtrllineLoop Article |
| 1.3.6.1.4.1.20044.119.6.3.66.1 | Rowpmo5005CtrllineLoopEntry | not-accessible | current | Row definition for the pmo5005CtrllineLoop table |
| 1.3.6.1.4.1.20044.119.6.3.66.1.1 | Columnpmo5005CtrllineLoopIndex | read-only | current | Index definition for the pmo5005CtrllineLoop table |
| 1.3.6.1.4.1.20044.119.6.3.66.1.2 | Columnpmo5005CtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID enables the Line Facility Loopback mode, looping the line input signal on the output. The Upstream part of the module is timed… |
| 1.3.6.1.4.1.20044.119.6.3.263 | Tablepmo5005CtrllineResetAllCountTable | not-accessible | current | List of pmo5005CtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.119.6.3.263.1 | Rowpmo5005CtrllineResetAllCountEntry | not-accessible | current | Row definition for the pmo5005CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.119.6.3.263.1.1 | Columnpmo5005CtrllineResetAllCountIndex | read-only | current | Index definition for the pmo5005CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.119.6.3.263.1.2 | Columnpmo5005CtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.119.7 | Nodepmo5005ri | |||
| 1.3.6.1.4.1.20044.119.7.1 | Nodepmo5005riTable | |||
| 1.3.6.1.4.1.20044.119.7.1.1 | Tablepmo5005RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.119.7.1.1.1 | Rowpmo5005RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.119.7.1.1.1.1 | Columnpmo5005RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.119.7.1.1.1.2 | Columnpmo5005Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.119.7.1.2 | Tablepmo5005RinvLineTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.119.7.1.2.1 | Rowpmo5005RinvLineEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.119.7.1.2.1.1 | Columnpmo5005RinvLineIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.119.7.1.2.1.2 | Columnpmo5005RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.119.7.2 | Scalarpmo5005RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.119.7.3 | Scalarpmo5005RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.119.7.4 | Scalarpmo5005RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.119.7.5 | Scalarpmo5005RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.119.7.6 | Scalarpmo5005RinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.119.8 | Nodepmo5005download | |||
| 1.3.6.1.4.1.20044.119.8.1 | Nodepmo5005DwlOther | |||
| 1.3.6.1.4.1.20044.119.8.1.0 | Nodepmo5005DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.119.8.1.0.1 | Scalarpmo5005DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.119.8.1.0.2 | Scalarpmo5005DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.119.8.1.1 | Nodepmo5005DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.119.8.1.1.1 | Scalarpmo5005DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.119.8.1.1.2 | Scalarpmo5005DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.119.8.1.1.5 | Scalarpmo5005DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.119.8.1.1.6 | Scalarpmo5005DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.119.8.1.2 | Nodepmo5005DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.119.8.1.2.1 | Scalarpmo5005DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.119.8.1.2.2 | Scalarpmo5005DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.119.8.1.2.3 | Scalarpmo5005DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.119.8.1.2.4 | Scalarpmo5005DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.119.8.1.2.5 | Scalarpmo5005DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.119.8.1.2.6 | Scalarpmo5005DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.119.8.1.2.7 | Scalarpmo5005DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.119.8.1.2.8 | Scalarpmo5005DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.119.8.2 | Nodepmo5005DwlClient | |||
| 1.3.6.1.4.1.20044.119.8.3 | Nodepmo5005DwlLine | |||
| 1.3.6.1.4.1.20044.119.9 | Nodepmo5005Config | |||
| 1.3.6.1.4.1.20044.119.9.1 | Nodepmo5005CfgStartup | |||
| 1.3.6.1.4.1.20044.119.9.1.1 | Tablepmo5005CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.1.1.1 | Rowpmo5005CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.119.9.1.1.1.1 | Columnpmo5005CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.119.9.1.1.1.3 | Columnpmo5005CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.119.9.1.1.1.4 | Columnpmo5005CfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.119.9.1.1.1.14 | Columnpmo5005CfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.119.9.1.2 | Tablepmo5005CfgLinexr1StartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.1.2.1 | Rowpmo5005CfgLinexr1StartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.119.9.1.2.1.1 | Columnpmo5005CfgLinexr1StartupIndex | read-only | current | Index definition for the linexr1Startup table |
| 1.3.6.1.4.1.20044.119.9.1.2.1.3 | Columnpmo5005CfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.119.9.1.2.1.14 | Columnpmo5005CfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.119.9.1.3 | Tablepmo5005CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.1.3.1 | Rowpmo5005CfgOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.119.9.1.3.1.1 | Columnpmo5005CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.119.9.1.3.1.3 | Columnpmo5005CfgLineControlsPortn | read-write | deprecated | Default Line settings :This register configures the start-up settings on the ports |
| 1.3.6.1.4.1.20044.119.9.1.3.1.6 | Columnpmo5005CfgLinePwrLaserPortn | read-write | current | Default Line output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.119.9.1.3.1.7 | Columnpmo5005CfgLineFCurrentPortn | read-write | current | Default Line transceiver Channel :This register configures the start-up laser channel of the client transceiver |
| 1.3.6.1.4.1.20044.119.9.1.3.1.8 | Columnpmo5005CfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the client transceiver |
| 1.3.6.1.4.1.20044.119.9.1.3.1.9 | Columnpmo5005CfgLineFoPortn | read-write | current | Default Line first Frequency :This register configures the start-up first frequency of the client transceiver |
| 1.3.6.1.4.1.20044.119.9.1.4 | Tablepmo5005CfgClientOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.1.4.1 | Rowpmo5005CfgClientOtxtlhEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.119.9.1.4.1.1 | Columnpmo5005CfgClientOtxtlhIndex | read-only | current | Index definition for the clientOtxtlh table |
| 1.3.6.1.4.1.20044.119.9.1.4.1.3 | Columnpmo5005CfgControlsPortn | read-write | deprecated | Defaut Client settings :This register configures the start-up settings on the ports |
| 1.3.6.1.4.1.20044.119.9.1.4.1.6 | Columnpmo5005CfgClientPwrLaserPortn | read-write | deprecated | Defaut Client output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.119.9.1.4.1.7 | Columnpmo5005CfgClientFCurrentPortn | read-write | deprecated | Default Client transceiver Channel :This register configures the start-up laser channel of the client transceiver |
| 1.3.6.1.4.1.20044.119.9.1.4.1.8 | Columnpmo5005CfgClientGridCurrentPortn | read-write | deprecated | Default Client transceiver Grid :This register configures the start-up laser grid of the client transceiver |
| 1.3.6.1.4.1.20044.119.9.1.4.1.9 | Columnpmo5005CfgClientFoPortn | read-write | deprecated | Default Client first Frequency :This register configures the start-up first frequency of the client transceiver |
| 1.3.6.1.4.1.20044.119.9.2 | Nodepmo5005CfgLabels | |||
| 1.3.6.1.4.1.20044.119.9.3 | Nodepmo5005CfgOther | |||
| 1.3.6.1.4.1.20044.119.9.3.1 | Nodepmo5005tablemoduleOther | |||
| 1.3.6.1.4.1.20044.119.9.3.1.2 | Scalarpmo5005Cfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.119.9.4 | Nodepmo5005CfgLabelsClient | |||
| 1.3.6.1.4.1.20044.119.9.4.1 | Tablepmo5005CfgClientStartupLabelsTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.4.1.1 | Rowpmo5005CfgClientStartupLabelsEntry | not-accessible | current | Row definition for the labelsClient table |
| 1.3.6.1.4.1.20044.119.9.4.1.1.1 | Columnpmo5005CfgClientStartupLabelsIndex | read-only | current | Index definition for the clientStartupLabels table |
| 1.3.6.1.4.1.20044.119.9.4.1.1.3 | Columnpmo5005CfgLabelClientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.119.9.5 | Nodepmo5005CfgLabelsLine | |||
| 1.3.6.1.4.1.20044.119.9.5.1 | Tablepmo5005CfgLineStartupLabelsTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.5.1.1 | Rowpmo5005CfgLineStartupLabelsEntry | not-accessible | current | Row definition for the labelsLine table |
| 1.3.6.1.4.1.20044.119.9.5.1.1.1 | Columnpmo5005CfgLineStartupLabelsIndex | read-only | current | Index definition for the lineStartupLabels table |
| 1.3.6.1.4.1.20044.119.9.5.1.1.3 | Columnpmo5005CfgLabelLinePortn | read-write | current | Default settings on the label of the Lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.119.9.6 | Nodepmo5005CfgOdu2Clienta | |||
| 1.3.6.1.4.1.20044.119.9.6.1 | Tablepmo5005CfgClientStartupOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.6.1.1 | Rowpmo5005CfgClientStartupOduEntry | not-accessible | current | Row definition for the odu2Clienta table |
| 1.3.6.1.4.1.20044.119.9.6.1.1.1 | Columnpmo5005CfgClientStartupOduIndex | read-only | current | Index definition for the clientStartupOdu table |
| 1.3.6.1.4.1.20044.119.9.6.1.1.3 | Columnpmo5005CfgOdu2ReserveLsbPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.119.9.6.1.1.4 | Columnpmo5005CfgOdu2DegthresholdPortn | read-write | deprecated | ODU2 Degrade Threshold : |
| 1.3.6.1.4.1.20044.119.9.6.1.1.5 | Columnpmo5005CfgOdu2DegmPortn | read-write | deprecated | ODU2 Degrade Confirmation : |
| 1.3.6.1.4.1.20044.119.9.6.1.1.6 | Columnpmo5005CfgOdu2SettingsPortn | read-write | deprecated | ODU2 Settings : |
| 1.3.6.1.4.1.20044.119.9.7 | Nodepmo5005CfgOtu2Line | |||
| 1.3.6.1.4.1.20044.119.9.7.1 | Tablepmo5005CfgLinexStartupOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.7.1.1 | Rowpmo5005CfgLinexStartupOtuEntry | not-accessible | current | Row definition for the otu2Line table |
| 1.3.6.1.4.1.20044.119.9.7.1.1.1 | Columnpmo5005CfgLinexStartupOtuIndex | read-only | current | Index definition for the linexStartupOtu table |
| 1.3.6.1.4.1.20044.119.9.7.1.1.3 | Columnpmo5005CfgOtu2ReserveMsbPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.119.9.7.1.1.4 | Columnpmo5005CfgOtu2DegthresholdPortn | read-write | deprecated | OTU2 Degrade Threshold : |
| 1.3.6.1.4.1.20044.119.9.7.1.1.5 | Columnpmo5005CfgOtu2DegmPortn | read-write | deprecated | OTU2 Degrade Confirmation : |
| 1.3.6.1.4.1.20044.119.9.7.1.1.6 | Columnpmo5005CfgOtu2SettingsPortn | read-write | deprecated | OTU2 Settings : |
| 1.3.6.1.4.1.20044.119.9.8 | Nodepmo5005CfgSapiTxClient | |||
| 1.3.6.1.4.1.20044.119.9.8.1 | Tablepmo5005CfgClientSapiTxOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.8.1.1 | Rowpmo5005CfgClientSapiTxOduEntry | not-accessible | current | Row definition for the sapiTxClient table |
| 1.3.6.1.4.1.20044.119.9.8.1.1.1 | Columnpmo5005CfgClientSapiTxOduIndex | read-only | current | Index definition for the clientSapiTxOdu table |
| 1.3.6.1.4.1.20044.119.9.8.1.1.3 | Columnpmo5005CfgClientSapiTxSetupPortn | read-write | deprecated | Client Transmitted SAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.119.9.9 | Nodepmo5005CfgSapiExpClient | |||
| 1.3.6.1.4.1.20044.119.9.9.1 | Tablepmo5005CfgClientSapiExpOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.9.1.1 | Rowpmo5005CfgClientSapiExpOduEntry | not-accessible | current | Row definition for the sapiExpClient table |
| 1.3.6.1.4.1.20044.119.9.9.1.1.1 | Columnpmo5005CfgClientSapiExpOduIndex | read-only | current | Index definition for the clientSapiExpOdu table |
| 1.3.6.1.4.1.20044.119.9.9.1.1.3 | Columnpmo5005CfgClientSapiExpSetupPortn | read-write | deprecated | Client Expected SAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.10 | Nodepmo5005CfgSapiAccClient | |||
| 1.3.6.1.4.1.20044.119.9.10.1 | Tablepmo5005CfgClientSapiAccOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.10.1.1 | Rowpmo5005CfgClientSapiAccOduEntry | not-accessible | current | Row definition for the sapiAccClient table |
| 1.3.6.1.4.1.20044.119.9.10.1.1.1 | Columnpmo5005CfgClientSapiAccOduIndex | read-only | current | Index definition for the clientSapiAccOdu table |
| 1.3.6.1.4.1.20044.119.9.10.1.1.3 | Columnpmo5005CfgClientSapiAccSetupPortn | read-write | deprecated | Client Accepted SAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.11 | Nodepmo5005CfgDapiTxClient | |||
| 1.3.6.1.4.1.20044.119.9.11.1 | Tablepmo5005CfgClientDapiTxOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.11.1.1 | Rowpmo5005CfgClientDapiTxOduEntry | not-accessible | current | Row definition for the dapiTxClient table |
| 1.3.6.1.4.1.20044.119.9.11.1.1.1 | Columnpmo5005CfgClientDapiTxOduIndex | read-only | current | Index definition for the clientDapiTxOdu table |
| 1.3.6.1.4.1.20044.119.9.11.1.1.3 | Columnpmo5005CfgClientDapiTxSetupPortn | read-write | deprecated | Client Transmitted DAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.119.9.12 | Nodepmo5005CfgDapiExpClient | |||
| 1.3.6.1.4.1.20044.119.9.12.1 | Tablepmo5005CfgClientDapiExpOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.12.1.1 | Rowpmo5005CfgClientDapiExpOduEntry | not-accessible | current | Row definition for the dapiExpClient table |
| 1.3.6.1.4.1.20044.119.9.12.1.1.1 | Columnpmo5005CfgClientDapiExpOduIndex | read-only | current | Index definition for the clientDapiExpOdu table |
| 1.3.6.1.4.1.20044.119.9.12.1.1.3 | Columnpmo5005CfgClientDapiExpSetupPortn | read-write | deprecated | Client Expected DAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.13 | Nodepmo5005CfgDapiAccClient | |||
| 1.3.6.1.4.1.20044.119.9.13.1 | Tablepmo5005CfgClientDapiAccOduTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.13.1.1 | Rowpmo5005CfgClientDapiAccOduEntry | not-accessible | current | Row definition for the dapiAccClient table |
| 1.3.6.1.4.1.20044.119.9.13.1.1.1 | Columnpmo5005CfgClientDapiAccOduIndex | read-only | current | Index definition for the clientDapiAccOdu table |
| 1.3.6.1.4.1.20044.119.9.13.1.1.3 | Columnpmo5005CfgClientDapiAccSetupPortn | read-write | deprecated | Client Accepted DAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.14 | Nodepmo5005CfgSapiTxLine | |||
| 1.3.6.1.4.1.20044.119.9.14.1 | Tablepmo5005CfgLineSapiTxOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.14.1.1 | Rowpmo5005CfgLineSapiTxOtuEntry | not-accessible | current | Row definition for the sapiTxLine table |
| 1.3.6.1.4.1.20044.119.9.14.1.1.1 | Columnpmo5005CfgLineSapiTxOtuIndex | read-only | current | Index definition for the lineSapiTxOtu table |
| 1.3.6.1.4.1.20044.119.9.14.1.1.3 | Columnpmo5005CfgLineSapiTxSetupPortn | read-write | deprecated | Line Transmitted SAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.119.9.15 | Nodepmo5005CfgSapiExpLine | |||
| 1.3.6.1.4.1.20044.119.9.15.1 | Tablepmo5005CfgLineSapiExpOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.15.1.1 | Rowpmo5005CfgLineSapiExpOtuEntry | not-accessible | current | Row definition for the sapiExpLine table |
| 1.3.6.1.4.1.20044.119.9.15.1.1.1 | Columnpmo5005CfgLineSapiExpOtuIndex | read-only | current | Index definition for the lineSapiExpOtu table |
| 1.3.6.1.4.1.20044.119.9.15.1.1.3 | Columnpmo5005CfgLineSapiExpSetupPortn | read-write | deprecated | Line Expected SAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.16 | Nodepmo5005CfgSapiAccLine | |||
| 1.3.6.1.4.1.20044.119.9.16.1 | Tablepmo5005CfgLineSapiAccOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.16.1.1 | Rowpmo5005CfgLineSapiAccOtuEntry | not-accessible | current | Row definition for the sapiAccLine table |
| 1.3.6.1.4.1.20044.119.9.16.1.1.1 | Columnpmo5005CfgLineSapiAccOtuIndex | read-only | current | Index definition for the lineSapiAccOtu table |
| 1.3.6.1.4.1.20044.119.9.16.1.1.3 | Columnpmo5005CfgLineSapiAccSetupPortn | read-write | deprecated | Line Accepted SAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.17 | Nodepmo5005CfgDapiTxLine | |||
| 1.3.6.1.4.1.20044.119.9.17.1 | Tablepmo5005CfgLineDapiTxOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.17.1.1 | Rowpmo5005CfgLineDapiTxOtuEntry | not-accessible | current | Row definition for the dapiTxLine table |
| 1.3.6.1.4.1.20044.119.9.17.1.1.1 | Columnpmo5005CfgLineDapiTxOtuIndex | read-only | current | Index definition for the lineDapiTxOtu table |
| 1.3.6.1.4.1.20044.119.9.17.1.1.3 | Columnpmo5005CfgLineDapiTxSetupPortn | read-write | deprecated | Line Transmitted DAPI :This register defines the value of the transmitted Trace Identifier on the line output |
| 1.3.6.1.4.1.20044.119.9.18 | Nodepmo5005CfgDapiExpLine | |||
| 1.3.6.1.4.1.20044.119.9.18.1 | Tablepmo5005CfgLineDapiExpOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.18.1.1 | Rowpmo5005CfgLineDapiExpOtuEntry | not-accessible | current | Row definition for the dapiExpLine table |
| 1.3.6.1.4.1.20044.119.9.18.1.1.1 | Columnpmo5005CfgLineDapiExpOtuIndex | read-only | current | Index definition for the lineDapiExpOtu table |
| 1.3.6.1.4.1.20044.119.9.18.1.1.3 | Columnpmo5005CfgLineDapiExpSetupPortn | read-write | deprecated | Line Expected DAPI :This register defines the value of the expected Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.19 | Nodepmo5005CfgDapiAccLine | |||
| 1.3.6.1.4.1.20044.119.9.19.1 | Tablepmo5005CfgLineDapiAccOtuTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.19.1.1 | Rowpmo5005CfgLineDapiAccOtuEntry | not-accessible | current | Row definition for the dapiAccLine table |
| 1.3.6.1.4.1.20044.119.9.19.1.1.1 | Columnpmo5005CfgLineDapiAccOtuIndex | read-only | current | Index definition for the lineDapiAccOtu table |
| 1.3.6.1.4.1.20044.119.9.19.1.1.3 | Columnpmo5005CfgLineDapiAccSetupPortn | read-write | deprecated | Line Accepted DAPI :This register defines the value of the accepted Trace Identifier on the line input |
| 1.3.6.1.4.1.20044.119.9.20 | Nodepmo5005CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.119.9.20.1 | Tablepmo5005CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.119.9.20.1.1 | Rowpmo5005CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.119.9.20.1.1.1 | Columnpmo5005CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.119.9.20.1.1.3 | Columnpmo5005CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.119.9.20.1.1.4 | Columnpmo5005CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.119.9.20.1.1.5 | Columnpmo5005CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.119.9.20.1.1.6 | Columnpmo5005CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.119.9.20.1.1.7 | Columnpmo5005CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.119.9.257 | Scalarpmo5005CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.119.10 | Nodepmo5005traps | |||
| 1.3.6.1.4.1.20044.119.10.2 | Scalarpmo5005trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.119.10.3 | Scalarpmo5005trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.119.10.4 | Scalarpmo5005trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.119.10.30 | Notificationpmo5005LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.119.10.31 | Notificationpmo5005LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.119.10.32 | Notificationpmo5005LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.119.10.33 | Notificationpmo5005LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.119.10.34 | Notificationpmo5005LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.119.10.35 | Notificationpmo5005LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.119.10.40 | Notificationpmo5005ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.119.10.41 | Notificationpmo5005ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.119.10.42 | Notificationpmo5005ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.119.10.43 | Notificationpmo5005ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.119.10.44 | Notificationpmo5005ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.119.10.45 | Notificationpmo5005ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.119.10.50 | Notificationpmo5005PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.119.10.51 | Notificationpmo5005PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.119.11 | Nodepmo5005Monitoring | |||
| 1.3.6.1.4.1.20044.119.11.1 | Nodepmo5005MonOther | |||
| 1.3.6.1.4.1.20044.119.11.1.3 | Nodepmo5005MonRmon | |||
| 1.3.6.1.4.1.20044.119.11.1.3.359 | Scalarpmo5005MonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.119.11.1.3.360 | Scalarpmo5005MonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.119.11.2 | Nodepmo5005MonClient | |||
| 1.3.6.1.4.1.20044.119.11.2.4 | Nodepmo5005MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.119.11.2.4.16 | Tablepmo5005MonupRmonBytesCounterClientInputTable | not-accessible | current | List of pmo5005MonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.16.1 | Rowpmo5005MonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.16.1.1 | Columnpmo5005MonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pmo5005MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.16.1.2 | Columnpmo5005MonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.119.11.2.4.16.1.3 | Columnpmo5005MonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.16.1.4 | Columnpmo5005MonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.32 | Tablepmo5005MonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pmo5005MonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.32.1 | Rowpmo5005MonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.32.1.1 | Columnpmo5005MonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pmo5005MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.32.1.2 | Columnpmo5005MonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a FCS error is detected on the client port <Help> This counter gives the number of CRC Errors rece… |
| 1.3.6.1.4.1.20044.119.11.2.4.32.1.3 | Columnpmo5005MonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.32.1.4 | Columnpmo5005MonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.48 | Tablepmo5005MonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pmo5005MonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.48.1 | Rowpmo5005MonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.48.1.1 | Columnpmo5005MonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pmo5005MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.48.1.2 | Columnpmo5005MonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.119.11.2.4.48.1.3 | Columnpmo5005MonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.48.1.4 | Columnpmo5005MonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.64 | Tablepmo5005MonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pmo5005MonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.64.1 | Rowpmo5005MonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.64.1.1 | Columnpmo5005MonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pmo5005MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.64.1.2 | Columnpmo5005MonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.119.11.2.4.64.1.3 | Columnpmo5005MonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.64.1.4 | Columnpmo5005MonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.80 | Tablepmo5005MonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pmo5005MonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.80.1 | Rowpmo5005MonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.80.1.1 | Columnpmo5005MonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pmo5005MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.80.1.2 | Columnpmo5005MonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.119.11.2.4.80.1.3 | Columnpmo5005MonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.80.1.4 | Columnpmo5005MonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.96 | Tablepmo5005MonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pmo5005MonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.96.1 | Rowpmo5005MonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.96.1.1 | Columnpmo5005MonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pmo5005MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.96.1.2 | Columnpmo5005MonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.119.11.2.4.96.1.3 | Columnpmo5005MonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.96.1.4 | Columnpmo5005MonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.224 | Tablepmo5005MondwRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pmo5005MondwRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.224.1 | Rowpmo5005MondwRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MondwRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.224.1.1 | Columnpmo5005MondwRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pmo5005MondwRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.224.1.2 | Columnpmo5005MondwRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a FCS error is detected on the output client port <Help> This counter gives the number of CRC Err… |
| 1.3.6.1.4.1.20044.119.11.2.4.224.1.3 | Columnpmo5005MondwRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | Output B1/FCS Errors Counter Error :This OID when set indicates the output B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.224.1.4 | Columnpmo5005MondwRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | Output B1/FCS Errors Counter Overload :This OID when set indicates an output B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.240 | Tablepmo5005MondwRmonPacketsCounterClientInputTable | not-accessible | current | List of pmo5005MondwRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.119.11.2.4.240.1 | Rowpmo5005MondwRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pmo5005MondwRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.240.1.1 | Columnpmo5005MondwRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pmo5005MondwRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.119.11.2.4.240.1.2 | Columnpmo5005MondwRmonPacketsCounterClientInputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packets transmit… |
| 1.3.6.1.4.1.20044.119.11.2.4.240.1.3 | Columnpmo5005MondwRmonPacketsCounterClientInputErrorPortn | read-only | current | Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.119.11.2.4.240.1.4 | Columnpmo5005MondwRmonPacketsCounterClientInputOverloadPortn | read-only | current | Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port |
| 1.3.6.1.4.1.20044.119.11.5 | Nodepmo5005MonPerfOther | |||
| 1.3.6.1.4.1.20044.119.11.5.1 | Nodepmo5005MonPerfSync | |||
| 1.3.6.1.4.1.20044.119.11.5.1.257 | Scalarpmo5005PerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.119.11.5.1.259 | Scalarpmo5005Perf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.119.11.5.1.260 | Scalarpmo5005Perf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.119.11.5.2 | Nodepmo5005MonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.119.11.5.2.1 | Scalarpmo5005Perf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.119.11.5.2.2 | Scalarpmo5005Perf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.119.11.5.2.5 | Scalarpmo5005Perf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.119.11.5.2.6 | Scalarpmo5005Perf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.119.11.5.2.7 | Scalarpmo5005PerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.119.11.5.2.8 | Scalarpmo5005PerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.119.11.6 | Nodepmo5005MonPerfClient | |||
| 1.3.6.1.4.1.20044.119.11.6.16 | Tablepmo5005PerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pmo5005PerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.119.11.6.16.1 | Rowpmo5005PerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.6.16.1.1 | Columnpmo5005PerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.6.16.1.2 | Columnpmo5005PerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.16.1.3 | Columnpmo5005PerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.16.1.4 | Columnpmo5005PerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.16.1.5 | Columnpmo5005PerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.16.1.6 | Columnpmo5005PerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.16.1.7 | Columnpmo5005PerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.16.1.8 | Columnpmo5005PerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.16.1.9 | Columnpmo5005PerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.16.1.10 | Columnpmo5005PerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.16.1.11 | Columnpmo5005PerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.32 | Tablepmo5005PerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.6.32.1 | Rowpmo5005PerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.32.1.1 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.32.1.2 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.32.1.3 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.32.1.4 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.32.1.5 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.32.1.6 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.32.1.7 | Columnpmo5005PerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.32.1.8 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.32.1.9 | Columnpmo5005PerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.32.1.10 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.32.1.11 | Columnpmo5005PerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.48 | Tablepmo5005PerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pmo5005PerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.119.11.6.48.1 | Rowpmo5005PerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.6.48.1.1 | Columnpmo5005PerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.6.48.1.2 | Columnpmo5005PerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.48.1.3 | Columnpmo5005PerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.48.1.4 | Columnpmo5005PerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.48.1.5 | Columnpmo5005PerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.48.1.6 | Columnpmo5005PerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.48.1.7 | Columnpmo5005PerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.48.1.8 | Columnpmo5005PerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.48.1.9 | Columnpmo5005PerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.48.1.10 | Columnpmo5005PerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.48.1.11 | Columnpmo5005PerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.64 | Tablepmo5005PerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.6.64.1 | Rowpmo5005PerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.64.1.1 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.64.1.2 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.64.1.3 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.64.1.4 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.64.1.5 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.64.1.6 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.64.1.7 | Columnpmo5005PerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.64.1.8 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.64.1.9 | Columnpmo5005PerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.64.1.10 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.64.1.11 | Columnpmo5005PerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.80 | Tablepmo5005PerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pmo5005PerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.119.11.6.80.1 | Rowpmo5005PerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.6.80.1.1 | Columnpmo5005PerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.6.80.1.2 | Columnpmo5005PerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.80.1.3 | Columnpmo5005PerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.80.1.4 | Columnpmo5005PerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.80.1.5 | Columnpmo5005PerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.80.1.6 | Columnpmo5005PerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.80.1.7 | Columnpmo5005PerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.80.1.8 | Columnpmo5005PerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.80.1.9 | Columnpmo5005PerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.80.1.10 | Columnpmo5005PerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.80.1.11 | Columnpmo5005PerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.96 | Tablepmo5005PerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.6.96.1 | Rowpmo5005PerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.96.1.1 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.96.1.2 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.96.1.3 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.96.1.4 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.96.1.5 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.96.1.6 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.96.1.7 | Columnpmo5005PerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.96.1.8 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.96.1.9 | Columnpmo5005PerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.96.1.10 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.96.1.11 | Columnpmo5005PerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.112 | Tablepmo5005PerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pmo5005PerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.119.11.6.112.1 | Rowpmo5005PerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.6.112.1.1 | Columnpmo5005PerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.6.112.1.2 | Columnpmo5005PerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.112.1.3 | Columnpmo5005PerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.112.1.4 | Columnpmo5005PerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.112.1.5 | Columnpmo5005PerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.112.1.6 | Columnpmo5005PerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.112.1.7 | Columnpmo5005PerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.112.1.8 | Columnpmo5005PerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.112.1.9 | Columnpmo5005PerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.112.1.10 | Columnpmo5005PerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.112.1.11 | Columnpmo5005PerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.128 | Tablepmo5005PerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.6.128.1 | Rowpmo5005PerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.128.1.1 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.128.1.2 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.128.1.3 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.6.128.1.4 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.128.1.5 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.128.1.6 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.128.1.7 | Columnpmo5005PerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.128.1.8 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.128.1.9 | Columnpmo5005PerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.128.1.10 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.128.1.11 | Columnpmo5005PerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.6.432 | Tablepmo5005PerfDatacomClientCurrent15StatTable | not-accessible | current | List of pmo5005PerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.119.11.6.432.1 | Rowpmo5005PerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pmo5005PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.6.432.1.1 | Columnpmo5005PerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pmo5005PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.6.432.1.4 | Columnpmo5005perfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.432.1.5 | Columnpmo5005perfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.432.1.6 | Columnpmo5005perfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.432.1.7 | Columnpmo5005perfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.119.11.6.432.1.28 | Columnpmo5005perfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.432.1.29 | Columnpmo5005perfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.432.1.30 | Columnpmo5005perfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.432.1.31 | Columnpmo5005perfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.119.11.6.448 | Tablepmo5005PerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.6.448.1 | Rowpmo5005PerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.448.1.1 | Columnpmo5005PerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.448.1.4 | Columnpmo5005perfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.448.1.5 | Columnpmo5005perfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.448.1.6 | Columnpmo5005perfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.448.1.7 | Columnpmo5005perfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.119.11.6.448.1.28 | Columnpmo5005perfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.448.1.29 | Columnpmo5005perfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.448.1.30 | Columnpmo5005perfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.448.1.31 | Columnpmo5005perfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.119.11.6.464 | Tablepmo5005PerfDatacomClientCurrent24StatTable | not-accessible | current | List of pmo5005PerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.119.11.6.464.1 | Rowpmo5005PerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pmo5005PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.6.464.1.1 | Columnpmo5005PerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pmo5005PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.6.464.1.4 | Columnpmo5005perfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.464.1.5 | Columnpmo5005perfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.464.1.6 | Columnpmo5005perfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.464.1.7 | Columnpmo5005perfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.119.11.6.464.1.28 | Columnpmo5005perfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.464.1.29 | Columnpmo5005perfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.464.1.30 | Columnpmo5005perfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.464.1.31 | Columnpmo5005perfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.119.11.6.480 | Tablepmo5005PerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.6.480.1 | Rowpmo5005PerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.480.1.1 | Columnpmo5005PerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.6.480.1.4 | Columnpmo5005perfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.480.1.5 | Columnpmo5005perfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.480.1.6 | Columnpmo5005perfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.480.1.7 | Columnpmo5005perfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.119.11.6.480.1.28 | Columnpmo5005perfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.480.1.29 | Columnpmo5005perfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.119.11.6.480.1.30 | Columnpmo5005perfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.119.11.6.480.1.31 | Columnpmo5005perfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.119.11.7 | Nodepmo5005MonPerfLine | |||
| 1.3.6.1.4.1.20044.119.11.7.192 | Tablepmo5005PerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pmo5005PerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.119.11.7.192.1 | Rowpmo5005PerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.7.192.1.1 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.7.192.1.2 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.192.1.3 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.192.1.4 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.192.1.5 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.192.1.6 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.192.1.7 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.192.1.8 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.192.1.9 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.192.1.10 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.192.1.11 | Columnpmo5005PerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.193 | Tablepmo5005PerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.7.193.1 | Rowpmo5005PerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.193.1.1 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.193.1.2 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.193.1.3 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.193.1.4 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.193.1.5 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.193.1.6 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.193.1.7 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.193.1.8 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.193.1.9 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.193.1.10 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.193.1.11 | Columnpmo5005PerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.194 | Tablepmo5005PerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pmo5005PerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.119.11.7.194.1 | Rowpmo5005PerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.7.194.1.1 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.7.194.1.2 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.194.1.3 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.194.1.4 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.194.1.5 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.194.1.6 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.194.1.7 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.194.1.8 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.194.1.9 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.194.1.10 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.194.1.11 | Columnpmo5005PerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.195 | Tablepmo5005PerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.7.195.1 | Rowpmo5005PerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.195.1.1 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.195.1.2 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.195.1.3 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.195.1.4 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.195.1.5 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.195.1.6 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.195.1.7 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.195.1.8 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.195.1.9 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.195.1.10 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.195.1.11 | Columnpmo5005PerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.208 | Tablepmo5005PerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pmo5005PerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.119.11.7.208.1 | Rowpmo5005PerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.7.208.1.1 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.119.11.7.208.1.2 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.208.1.3 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.208.1.4 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.208.1.5 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.208.1.6 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.208.1.7 | Columnpmo5005PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.209 | Tablepmo5005PerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.7.209.1 | Rowpmo5005PerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.209.1.1 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.209.1.2 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.209.1.3 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.209.1.4 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.209.1.5 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.209.1.6 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.209.1.7 | Columnpmo5005PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.210 | Tablepmo5005PerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pmo5005PerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.119.11.7.210.1 | Rowpmo5005PerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pmo5005PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.7.210.1.1 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pmo5005PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.119.11.7.210.1.2 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.210.1.3 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.210.1.4 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.210.1.5 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.210.1.6 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.210.1.7 | Columnpmo5005PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.211 | Tablepmo5005PerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pmo5005PerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.119.11.7.211.1 | Rowpmo5005PerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pmo5005PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.211.1.1 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pmo5005PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.119.11.7.211.1.2 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.211.1.3 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.119.11.7.211.1.4 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.211.1.5 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.119.11.7.211.1.6 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.119.11.7.211.1.7 | Columnpmo5005PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pmo5005ClientChannel | INTEGER | current | Channel selection on transceiver Client ports |
| Pmo5005ClientProtocol | INTEGER { protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue6(6), protocolclientvalue7(7) } | current | Different values on the protocol on the client ports |
| Pmo5005DccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pmo5005LineChannel | INTEGER | current | Channel selection on transceiver Line ports |
| Pmo5005Odu2SapiMode | INTEGER { off(0), sapi(1), dapi(2), sapidapi(3) } | current | Mode for SAPI-DAPI |
| Pmo5005Otu2SapiMode | INTEGER { off(0), sapi(1), dapi(2), sapidapi(3) } | current | Mode for SAPI-DAPI |
| Pmo5005OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on client and line ports |