EKINOPS-Pmoabphcs-MIB
287 objects
Creation
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.61 | Identitymodulepmoabphcs | Creation | ||
| 1.3.6.1.4.1.20044.61.2 | Nodepmoabphcsalarms | |||
| 1.3.6.1.4.1.20044.61.2.1 | NodepmoabphcsAlmOther | |||
| 1.3.6.1.4.1.20044.61.2.1.1 | NodepmoabphcsAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.61.2.1.1.2 | NodepmoabphcsAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.61.2.1.1.2.1 | ScalarpmoabphcsAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.61.2.1.1.2.2 | ScalarpmoabphcsAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.61.2.1.1.2.3 | ScalarpmoabphcsAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.61.2.1.1.75 | NodepmoabphcsAlmfoaWarnings | |||
| 1.3.6.1.4.1.20044.61.2.1.1.75.7 | ScalarpmoabphcsAlmTermpLowWarning | read-only | current | Temperature Low Warning :This OID indicates that the PM temperature if lower than the Warning threshold <Condtype> TERMP_LOW_WARNING <Probcause> temperatureUna… |
| 1.3.6.1.4.1.20044.61.2.1.1.75.8 | ScalarpmoabphcsAlmTempHighWarning | read-only | current | Temperature High Warning :This OID indicates that the PM temperature if higher than the Warning threshold <Condtype> TEMP_HIGH_WARNING <Probcause> temperatureU… |
| 1.3.6.1.4.1.20044.61.2.1.2 | NodepmoabphcsAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.61.2.1.2.74 | NodepmoabphcsAlmfoaAlarms | |||
| 1.3.6.1.4.1.20044.61.2.1.2.74.7 | ScalarpmoabphcsAlmTermpLowAlarm | read-only | current | Temperature Low Alarm :This OID indicates that the PM temperature if lower than the alarm threshold <Condtype> TERMP_LOW_ALARM <Probcause> temperatureUnaccepta… |
| 1.3.6.1.4.1.20044.61.2.1.2.74.8 | ScalarpmoabphcsAlmTempHighAlarm | read-only | current | Temperature High Alarm :This OID indicates that the PM temperature is higher than the alarm threshold <Condtype> TEMP_HIGH_ALARM <Probcause> temperatureUnaccep… |
| 1.3.6.1.4.1.20044.61.2.1.3 | NodepmoabphcsAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.61.2.1.3.0 | NodepmoabphcsAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.61.2.1.3.0.1 | ScalarpmoabphcsAlmMaintenanceMode | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode <Help> This status indiates if the module is currently in maintenance mode <Condtype> M… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.2 | ScalarpmoabphcsAlmAprOn | read-only | current | Automatic Power Reduction :This OID indicates that the APR algorithm has been operated and the output of the lasers are shutdown <Help> The APR algorithm has b… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.9 | ScalarpmoabphcsAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.10 | ScalarpmoabphcsAlmUpEdfaInitNotCompl | read-only | current | Booster Not Initialized :This OID indicates that the initialisation of the Booster is not completed <Help> This status indicates if the Booster has been correc… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.11 | ScalarpmoabphcsAlmDwEdfaInitNotCompl | read-only | current | Pre-Amp Not Initialized :This OID indicates that the initialisation of the Pre-Amp is not completed <Help> This status indicates if the Pre-Amp has been correc… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.12 | ScalarpmoabphcsAlmExtPump1NotLocked | read-only | current | External Pump Not Detected :This OID indicates that the first external pump is not detected by the amplifier module <Help> This alarm indicates if the external… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.15 | ScalarpmoabphcsAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.61.2.1.3.0.16 | ScalarpmoabphcsAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.61.2.2 | NodepmoabphcsAlmClient | |||
| 1.3.6.1.4.1.20044.61.2.2.1 | NodepmoabphcsAlmClientNurg | |||
| 1.3.6.1.4.1.20044.61.2.2.1.33 | NodepmoabphcsAlmclientEdfaWarnings | |||
| 1.3.6.1.4.1.20044.61.2.2.1.33.1 | ScalarpmoabphcsAlmClientGainLowWarning | read-only | current | Pre-Amp Gain Low Warning :This OID indicates that the Gain is lower than the Warning threshold of the Pre-Amp Module <Help> This alarm indicates if the Pre-Amp… |
| 1.3.6.1.4.1.20044.61.2.2.1.33.2 | ScalarpmoabphcsAlmClientGainHighWarning | read-only | current | Pre-Amp Gain High Warning :This OID indicates that the Gain is higher than the Warning threshold of the Pre-Amp Module <Help> This alarm indicates if the Pre-A… |
| 1.3.6.1.4.1.20044.61.2.2.1.33.3 | ScalarpmoabphcsAlmClientInputPwrLowWarning | read-only | current | Pre-Amp Rx Pwr Low Warning :This OID indicates that the Receive Power is lower than the Warning threshold of the Pre-Amp Optical Module <Help> This warning ind… |
| 1.3.6.1.4.1.20044.61.2.2.1.33.4 | ScalarpmoabphcsAlmClientInputPwrHighWarning | read-only | current | Pre-Amp Rx Pwr High Warning :This OID indicates that the Receive Power is higher than the Warning threshold of the Pre-Amp Optical Module <Help> This warning i… |
| 1.3.6.1.4.1.20044.61.2.2.1.33.5 | ScalarpmoabphcsAlmClientOutputPwrLowWarning | read-only | current | Pre-Amp Tx Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning threshold of the Pre-Amp Optical Module <Help> This warning in… |
| 1.3.6.1.4.1.20044.61.2.2.1.33.6 | ScalarpmoabphcsAlmClientOutputPwrHighWarning | read-only | current | Pre-Amp Tx Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning threshold of the Pre-Amp Optical Module <Help> This warning … |
| 1.3.6.1.4.1.20044.61.2.2.1.33.7 | ScalarpmoabphcsAlmClientBiasLowWarning | read-only | current | Pre-Amp Bias Low Warning :This OID indicates that the Bias is lower than the Warning threshold of the Pre-Amp Optical Module <Help> This warning indicates if t… |
| 1.3.6.1.4.1.20044.61.2.2.1.33.8 | ScalarpmoabphcsAlmClientBiasHighWarning | read-only | current | Pre-Amp Bias High Warning :This OID indicates that the Bias is higher than the Warning threshold of the Pre-Amp Optical Module <Help> This warning indicates if… |
| 1.3.6.1.4.1.20044.61.2.2.2 | NodepmoabphcsAlmClientUrg | |||
| 1.3.6.1.4.1.20044.61.2.2.2.32 | NodepmoabphcsAlmclientEdfaAlarms1 | |||
| 1.3.6.1.4.1.20044.61.2.2.2.32.1 | ScalarpmoabphcsAlmClientGainLowAlarm | read-only | current | Pre-Amp Gain Low Alarm :This OID indicates that the Gain is lower than the alarm threshold of the Pre-Amp Module <Help> This alarm indicates if the Pre-Amp gai… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.2 | ScalarpmoabphcsAlmClientGainHighAlarm | read-only | current | Pre-Amp Gain High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the Pre-Amp Module <Help> This alarm indicates if the Pre-Amp g… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.3 | ScalarpmoabphcsAlmClientInputPwrLowAlarm | read-only | current | Pre-Amp Rx Pwr Low Alarm :This OID indicates that the Receive Power is lower than the alarm threshold of the Pre-Amp Optical Module <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.4 | ScalarpmoabphcsAlmClientInputPwrHighAlarm | read-only | current | Pre-Amp Rx Pwr High Alarm :This OID indicates that the Receive Power is higher than the alarm threshold of the Pre-Amp Optical Module <Help> This alarm indicat… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.5 | ScalarpmoabphcsAlmClientOutputPwrLowAlarm | read-only | current | Pre-Amp Tx Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm threshold of the Pre-Amp Optical Module <Help> This alarm indicate… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.6 | ScalarpmoabphcsAlmClientOutputPwrHighAlarm | read-only | current | Pre-Amp Tx Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm threshold of the Pre-Amp Optical Module <Help> This alarm indica… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.7 | ScalarpmoabphcsAlmClientBiasLowAlarm | read-only | current | Pre-Amp Bias Low Alarm :This OID indicates that the Bias is lower than the alarm threshold of the Pre-Amp Optical Module <Help> This alarm indicates if the Pre… |
| 1.3.6.1.4.1.20044.61.2.2.2.32.8 | ScalarpmoabphcsAlmClientBiasHighAlarm | read-only | current | Pre-Amp Bias High Alarm :This OID indicates that the Bias is higher than the alarm threshold of the Pre-Amp Optical Module <Help> This alarm indicates if the P… |
| 1.3.6.1.4.1.20044.61.2.2.3 | NodepmoabphcsAlmClientCrit | |||
| 1.3.6.1.4.1.20044.61.2.2.3.8 | NodepmoabphcsAlmsynthAlm8 | |||
| 1.3.6.1.4.1.20044.61.2.2.3.8.4 | ScalarpmoabphcsAlmClientHwFail | read-only | current | Client Port HW Failure :This OID indicates a failure on Client port, most probably caused by a HW issue <Condtype> CLIENT_HW_FAIL <Probcause> equipmentMalfunct… |
| 1.3.6.1.4.1.20044.61.2.2.3.8.5 | ScalarpmoabphcsAlmClientTxOff | read-only | current | Pre-Amp Optical Output Shutdown :This OID indicates the Pre-Amp optical output power is on <Help> This status indicates if the Pre-Amp laser pump transceiver l… |
| 1.3.6.1.4.1.20044.61.2.2.3.8.12 | ScalarpmoabphcsAlmClientFail | read-only | current | Client Port Failure :This OID indicates a failure on the Client port <Condtype> CLIENT_FAIL <Probcause> bandwidthReduced(4) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.61.2.2.3.8.13 | ScalarpmoabphcsAlmClientExtPumpFail | read-only | current | Pre-Amp External Pump Fail :This OID indicates that the external pump linked to the Pre-Amp is in fail condition <Help> This alarm indicates if the external pu… |
| 1.3.6.1.4.1.20044.61.2.2.3.8.14 | ScalarpmoabphcsAlmSupvbFail | read-only | current | : <Condtype> SUPVB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
| 1.3.6.1.4.1.20044.61.2.2.3.35 | NodepmoabphcsAlmclientEdfaAlarms2 | |||
| 1.3.6.1.4.1.20044.61.2.2.3.35.1 | ScalarpmoabphcsAlmClientEdfaNr | read-only | current | Pre-Amp Optical Module Not Ready :This OID indicates that the Pre-Amp Optical Module is not ready <Help> This status indicates if the Pre-Amp has been correctl… |
| 1.3.6.1.4.1.20044.61.2.2.3.35.2 | ScalarpmoabphcsAlmClientEdfaTecFail | read-only | current | Pre-Amp TEC Fail :This OID indicates that the TEC is in fail condition on the Pre-Amp Optical Module <Help> This alarm indicates if the TEC of the Pre-Amp is i… |
| 1.3.6.1.4.1.20044.61.2.2.3.35.3 | ScalarpmoabphcsAlmClientEdfaLaserFail | read-only | current | Pre-Amp Pump Laser Fail :This OID indicates a Transmit Laser Fail on the Pre-Amp Optical Module <Help> This alarm indicates if the laser of the Pre-Amp is in f… |
| 1.3.6.1.4.1.20044.61.2.2.3.35.4 | ScalarpmoabphcsAlmClientEdfaLos | read-only | current | Pre-Amp Loss Of Signal :This OID indicates a Loss of Signal on the Pre-Amp Optical Module <Help> This alarm indicates if an optical signal is detected on the P… |
| 1.3.6.1.4.1.20044.61.2.2.3.35.5 | ScalarpmoabphcsAlmClientExtPumpEdfaLowCurrent | read-only | current | Pre-Amp Pump Low Current :This OID indicates that the EDFA pump current of Pre-Amp is too low because of the external pump high power<Help> This alarm (only ac… |
| 1.3.6.1.4.1.20044.61.2.2.3.35.6 | ScalarpmoabphcsAlmClientGainOutOfRange | read-only | current | Pre-Amp Gain Out Of Range :This OID indicates the target gain of the Pre-Amp is out of range (18-32dB), the flatness of the Booster is not guaranteed.<Help> Th… |
| 1.3.6.1.4.1.20044.61.2.2.3.37 | NodepmoabphcsAlmclientMsaAlarms | |||
| 1.3.6.1.4.1.20044.61.2.2.3.37.1 | ScalarpmoabphcsAlmClientMsaLos | read-only | current | Pre-Amp MSA Loss Of Signal :This OID indicates a Loss of Signal is detected on the Mid Stage Access of the Pre-Amp EDFAThis alarm indicates a Loss of Signal is… |
| 1.3.6.1.4.1.20044.61.2.2.3.37.2 | ScalarpmoabphcsAlmClientMsaAttenuation | read-only | current | Pre-Amp MSA Attenuation Alarm :This OID indicates the attenuation on the Pre-Amp Mid Stage access has changed.This alarm indicates the attenuation on the Pre-A… |
| 1.3.6.1.4.1.20044.61.2.3 | NodepmoabphcsAlmLine | |||
| 1.3.6.1.4.1.20044.61.2.3.1 | NodepmoabphcsAlmLineNurg | |||
| 1.3.6.1.4.1.20044.61.2.3.1.41 | NodepmoabphcsAlmlineEdfaWarnings | |||
| 1.3.6.1.4.1.20044.61.2.3.1.41.1 | ScalarpmoabphcsAlmLineGainLowWarning | read-only | current | Booster Gain Low Warning :This OID indicates that the Gain is lower than the Warning threshold of the Booster Module <Help> This alarm indicates if the Booster… |
| 1.3.6.1.4.1.20044.61.2.3.1.41.2 | ScalarpmoabphcsAlmLineGainHighWarning | read-only | current | Booster Gain High Warning :This OID indicates that the Gain is higher than the Warning threshold of the Booster Module <Help> This alarm indicates if the Boost… |
| 1.3.6.1.4.1.20044.61.2.3.1.41.3 | ScalarpmoabphcsAlmLineInputPwrLowWarning | read-only | current | Booster Rx Pwr Low Warning :This OID indicates that the Receive Power is lower than the Warning threshold of the Booster Optical Module <Help> This warning ind… |
| 1.3.6.1.4.1.20044.61.2.3.1.41.4 | ScalarpmoabphcsAlmLineInputPwrHighWarning | read-only | current | Booster Rx Pwr High Warning :This OID indicates that the Receive Power is higher than the Warning threshold of the Booster Optical Module <Help> This warning i… |
| 1.3.6.1.4.1.20044.61.2.3.1.41.5 | ScalarpmoabphcsAlmLineOutputPwrLowWarning | read-only | current | Booster Tx Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning threshold of the Booster Optical Module <Help> This warning in… |
| 1.3.6.1.4.1.20044.61.2.3.1.41.6 | ScalarpmoabphcsAlmLineOutputPwrHighWarning | read-only | current | Booster Tx Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning threshold of the Booster Optical Module <Help> This warning … |
| 1.3.6.1.4.1.20044.61.2.3.1.41.7 | ScalarpmoabphcsAlmLineBiasLowWarning | read-only | current | Booster Bias Low Warning :This OID indicates that the Bias is lower than the Warning threshold of the Booster Optical Module <Help> This warning indicates if t… |
| 1.3.6.1.4.1.20044.61.2.3.1.41.8 | ScalarpmoabphcsAlmLineBiasHighWarning | read-only | current | Booster Bias High Warning :This OID indicates that the Bias is higher than the Warning threshold of the Booster Optical Module <Help> This warning indicates if… |
| 1.3.6.1.4.1.20044.61.2.3.2 | NodepmoabphcsAlmLineUrg | |||
| 1.3.6.1.4.1.20044.61.2.3.2.40 | NodepmoabphcsAlmlineEdfaAlarms1 | |||
| 1.3.6.1.4.1.20044.61.2.3.2.40.1 | ScalarpmoabphcsAlmLineGainLowAlarm | read-only | current | Booster Gain Low Alarm :This OID indicates that the Gain is lower than the alarm threshold of the Booster Module <Help> This alarm indicates if the Booster gai… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.2 | ScalarpmoabphcsAlmLineGainHighAlarm | read-only | current | Booster Gain High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the Booster Module <Help> This alarm indicates if the Booster g… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.3 | ScalarpmoabphcsAlmLineInputPwrLowAlarm | read-only | current | Booster Rx Pwr Low Alarm :This OID indicates that the Receive Power is lower than the alarm threshold of the Booster Optical Module <Help> This alarm indicates… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.4 | ScalarpmoabphcsAlmLineInputPwrHighAlarm | read-only | current | Booster Rx Pwr High Alarm :This OID indicates that the Receive Power is higher than the alarm threshold of the Booster Optical Module <Help> This alarm indicat… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.5 | ScalarpmoabphcsAlmLineOutputPwrLowAlarm | read-only | current | Booster Tx Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm threshold of the Booster Optical Module <Help> This alarm indicate… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.6 | ScalarpmoabphcsAlmLineOutputPwrHighAlarm | read-only | current | Booster Tx Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm threshold of the Booster Optical Module <Help> This alarm indica… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.7 | ScalarpmoabphcsAlmLineBiasLowAlarm | read-only | current | Booster Bias Low Alarm :This OID indicates that the Bias is lower than the alarm threshold of the Booster Optical Module <Help> This alarm indicates if the Boo… |
| 1.3.6.1.4.1.20044.61.2.3.2.40.8 | ScalarpmoabphcsAlmLineBiasHighAlarm | read-only | current | Booster Bias High Alarm :This OID indicates that the Bias is higher than the alarm threshold of the Booster Optical Module <Help> This alarm indicates if the B… |
| 1.3.6.1.4.1.20044.61.2.3.3 | NodepmoabphcsAlmLineCrit | |||
| 1.3.6.1.4.1.20044.61.2.3.3.7 | NodepmoabphcsAlmsynthAlm7 | |||
| 1.3.6.1.4.1.20044.61.2.3.3.7.4 | ScalarpmoabphcsAlmLineHwFail | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.61.2.3.3.7.5 | ScalarpmoabphcsAlmLineTxOff | read-only | current | Booster Optical Output Shutdown :This OID indicates the Booster optical output power is on <Help> This status indicates if the Booster laser pump is ON or OFF … |
| 1.3.6.1.4.1.20044.61.2.3.3.7.12 | ScalarpmoabphcsAlmLineFail | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> callEstablishmentError(5) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.61.2.3.3.7.13 | ScalarpmoabphcsAlmLineExtPumpFail | read-only | current | Booster External Pump Fail :This OID indicates that the external pump linked to the Booster is in fail condition <Help> This alarm indicates if the external pu… |
| 1.3.6.1.4.1.20044.61.2.3.3.7.14 | ScalarpmoabphcsAlmSupvaFail | read-only | current | : <Condtype> SUPVA_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
| 1.3.6.1.4.1.20044.61.2.3.3.43 | NodepmoabphcsAlmlineEdfaAlarms2 | |||
| 1.3.6.1.4.1.20044.61.2.3.3.43.1 | ScalarpmoabphcsAlmLineEdfaNr | read-only | current | Booster Optical Module Not Ready :This OID indicates that the Booster Optical Module is not ready <Help> This status indicates if the Booster has been correctl… |
| 1.3.6.1.4.1.20044.61.2.3.3.43.2 | ScalarpmoabphcsAlmLineEdfaTecFail | read-only | current | Booster TEC Fail :This OID indicates that the TEC is in fail condition on the Booster Optical Module <Help> This alarm indicates if the TEC of the Booster is i… |
| 1.3.6.1.4.1.20044.61.2.3.3.43.3 | ScalarpmoabphcsAlmLineEdfaLaserFail | read-only | current | Booster Pump Laser Fail :This OID indicates a Transmit Laser Fail on the Booster Optical Module <Help> This alarm indicates if the laser of the Booster is in f… |
| 1.3.6.1.4.1.20044.61.2.3.3.43.4 | ScalarpmoabphcsAlmLineEdfaLos | read-only | current | Booster Loss Of Signal :This OID indicates a Loss of Signal on the Booster Optical Module <Help> This alarm indicates if an optical signal is detected on the B… |
| 1.3.6.1.4.1.20044.61.2.3.3.43.5 | ScalarpmoabphcsAlmLineExtPumpEdfaLowCurrent | read-only | current | Booster Pump Low Current :This OID indicates that the EDFA pump current of Booster is too low because of the external pump high power<Help> This alarm (only ac… |
| 1.3.6.1.4.1.20044.61.2.3.3.43.6 | ScalarpmoabphcsAlmLineGainOutOfRange | read-only | current | Booster Gain Out Of Range :This OID indicates the target gain of the Booster is out of range (10-18dB), the flatness of the Booster is not guaranteed.<Help> Th… |
| 1.3.6.1.4.1.20044.61.2.3.3.45 | NodepmoabphcsAlmlineMsaAlarms | |||
| 1.3.6.1.4.1.20044.61.2.3.3.45.1 | ScalarpmoabphcsAlmLineMsaLos | read-only | current | Booster MSA Loss Of Signal :This OID indicates a Loss of Signal is detected on the Mid Stage Access of the Booster EDFAThis alarm indicates a Loss of Signal is… |
| 1.3.6.1.4.1.20044.61.2.3.3.45.2 | ScalarpmoabphcsAlmLineMsaAttenuation | read-only | current | Booster MSA Attenuation Alarm :This OID indicates the attenuation on the Booster Mid Stage access has changed.This alarm indicates the attenuation on the Pre-A… |
| 1.3.6.1.4.1.20044.61.2.3.3.48 | TablepmoabphcsAlmlineOscAlarmsTable | not-accessible | current | List of pmoabphcsAlmlineOscAlarms Article |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1 | RowpmoabphcsAlmlineOscAlarmsEntry | not-accessible | current | Row definition for the pmoabphcsAlmlineOscAlarms table |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.1 | ColumnpmoabphcsAlmlineOscAlarmsIndex | read-only | current | Index definition for the pmoabphcsAlmlineOscAlarms table |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.2 | ColumnpmoabphcsAlmLineLosPortn | read-only | current | OSC Loss Of Signal :This OID indicates that no signal is present on the OSC <Help> This alarms indicates that no signal is present on the OSC <Condtype> LINE_L… |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.3 | ColumnpmoabphcsAlmLineTxOffPortn | read-only | current | OSC Optical Output Shutdown :This OID indicates the optical output power is shutdown on OSC<Help> This alarm indicates the optical output power is shutdown on … |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.4 | ColumnpmoabphcsAlmLineTxFailPortn | read-only | current | OSC Tx Fail :This OID indicates the OSC Laser is in fail condition<Help> This alarm indicates the OSC Laser is in fail condition <Condtype> LINE_TX_FAIL_1 <Pro… |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.5 | ColumnpmoabphcsAlmLineFecFailPortn | read-only | current | OSC FEC Fail :This OID indicates the FEC is in fail condition on the OSC input port<Help> This alarms indicates the FEC is in fail condition on the OSC input p… |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.6 | ColumnpmoabphcsAlmLineOosPortn | read-only | current | OSC In Service :This OID indicates that the OSC is In Service (1) or Out or Service (2)<Help> This status indicates that the OSC is In Service or Out or Servic… |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.7 | ColumnpmoabphcsAlmLineLofPortn | read-only | current | OSC Loss Of Frame : <Condtype> LINE_LOF_1 <Probcause> inputOutputDeviceError(24) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.8 | ColumnpmoabphcsAlmLineOofPortn | read-only | current | OSC Out Of Frame : <Condtype> LINE_OOF_1 <Probcause> inputOutputDeviceError(24) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.9 | ColumnpmoabphcsAlmLineRemoteTxFailPortn | read-only | current | OSC Remote Tx Fail : <Condtype> LINE_REMOTE_TX_FAIL_1 <Probcause> informationalStatus(1000) <Alarmtype> other(1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.10 | ColumnpmoabphcsAlmLineWarningPortn | read-only | current | OSC DDM Warning :This OID indicates a warning is present on OSC Tx power, Receive power or temperature<Help> This alarm indicates a warning is present on OSC T… |
| 1.3.6.1.4.1.20044.61.2.3.3.48.1.11 | ColumnpmoabphcsAlmLineAlmPortn | read-only | current | OSC DDM Alarm :This alarm indicates an alarm is present on OSC Tx power, Rx power or temperature <Help> This alarm indicates an alarm is present on OSC Tx powe… |
| 1.3.6.1.4.1.20044.61.2.3.3.49 | TablepmoabphcsAlmlineOscThresholdAlarmsTable | not-accessible | current | List of pmoabphcsAlmlineOscThresholdAlarms Article |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1 | RowpmoabphcsAlmlineOscThresholdAlarmsEntry | not-accessible | current | Row definition for the pmoabphcsAlmlineOscThresholdAlarms table |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.1 | ColumnpmoabphcsAlmlineOscThresholdAlarmsIndex | read-only | current | Index definition for the pmoabphcsAlmlineOscThresholdAlarms table |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.2 | ColumnpmoabphcsAlmLineTxPwrLowAlarmPortn | read-only | current | OSC Tx Power Low Alarm :This OID indicates the Tx Power of the OSC is lower than the warning threshold<Help> This alarm indicates the Tx Power of the OSC is lo… |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.3 | ColumnpmoabphcsAlmLineTxPwrHighAlarmPortn | read-only | current | OSC Tx Power High Alarm :This OID indicates the Tx Power of the OSC is higher than the warning threshold<Help> This alarm indicates the Tx Power of the OSC is … |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.4 | ColumnpmoabphcsAlmLineRxPwrLowAlarmPortn | read-only | current | OSC Rx Power Low Alarm :This OID indicates the Rx Power of the OSC is lower than the alarm threshold<Help> This alarm indicates the Rx Power of the OSC is lowe… |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.5 | ColumnpmoabphcsAlmLineRxPwrHighAlarmPortn | read-only | current | OSC Rx Power High Alarm :This OID indicates the Rx Power of the OSC is higher than the alarm threshold<Help> This alarm indicates the Rx Power of the OSC is hi… |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.6 | ColumnpmoabphcsAlmLineSpanlossLowAlarmPortn | read-only | current | OSC Span Loss Low Alarm :This OID indicates the OSC Span Loss is 3dB lower than the span loss reference<Help> This alarm indicates the OSC Span Loss is 3dB low… |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.7 | ColumnpmoabphcsAlmLineSpanlossHighAlarmPortn | read-only | current | OSC Span Loss High Alarm :This OID indicates the OSC Span Loss is 3dB higher than the span loss reference <Help> This alarm indicates the OSC Span Loss is 3dB … |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.8 | ColumnpmoabphcsAlmLineOscBiasLowAlarmPortn | read-only | current | OSC Bias Current Low Alarm :This OID indicates the OSC bias current is lower than the alarm threshold <Help> This alarm indicates the OSC bias current is lower… |
| 1.3.6.1.4.1.20044.61.2.3.3.49.1.9 | ColumnpmoabphcsAlmLineOscBiasHighAlarmPortn | read-only | current | OSC Bias Current High Alarm :This OID indicates the OSC bias current is higher than the alarm threshold <Help> This alarm indicates the OSC bias current is hig… |
| 1.3.6.1.4.1.20044.61.2.3.3.50 | TablepmoabphcsAlmlineOscThresholdsWarningsTable | not-accessible | current | List of pmoabphcsAlmlineOscThresholdsWarnings Article |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1 | RowpmoabphcsAlmlineOscThresholdsWarningsEntry | not-accessible | current | Row definition for the pmoabphcsAlmlineOscThresholdsWarnings table |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.1 | ColumnpmoabphcsAlmlineOscThresholdsWarningsIndex | read-only | current | Index definition for the pmoabphcsAlmlineOscThresholdsWarnings table |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.2 | ColumnpmoabphcsAlmLineTxPwrLowWarningPortn | read-only | current | OSC Tx Power Low Warning :This OID indicates the Tx Power of the OSC is lower than the warning threshold<Help> This alarm indicates the Tx Power of the OSC is … |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.3 | ColumnpmoabphcsAlmLineTxPwrHighWarningPortn | read-only | current | OSC Tx Power High Warning :This OID indicates the Tx Power of the OSC is higher than the warning threshold<Help> This alarm indicates the Tx Power of the OSB i… |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.4 | ColumnpmoabphcsAlmLineRxPwrLowWarningPortn | read-only | current | OSC Rx Power Low Warning :This OID indicates the Rx Power of the OSC is lower than the warning threshold<Help> This alarm indicates the Tx Power of the OSC is … |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.5 | ColumnpmoabphcsAlmLineRxPwrHighWarningPortn | read-only | current | OSC Rx Power High Warning :This OID indicates the Rx Power of the OSC is higher than the warning threshold<Help> This alarm indicates the Rx Power of the OSC i… |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.6 | ColumnpmoabphcsAlmLineSpanlossLowWarningPortn | read-only | current | OSC Span Loss Low Warning :This OID indicates the OSC Span Loss is 1dB lower than the span loss reference<Help> This alarm indicates the OSC Span Loss is 1dB l… |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.7 | ColumnpmoabphcsAlmLineSpanlossHighWarningPortn | read-only | current | OSC Span Loss High Warning :This OID indicates the OSC Span Loss is 1dB higher than the span loss reference <Help> This alarm indicates the OSC Span Loss is 1d… |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.8 | ColumnpmoabphcsAlmLineOscBiasLowWarningPortn | read-only | current | OSC Bias Current Low Warning :This OID indicates the OSC bias current is lower than the warning threshold <Help> This alarm indicates the OSC bias current is l… |
| 1.3.6.1.4.1.20044.61.2.3.3.50.1.9 | ColumnpmoabphcsAlmLineOscBiasHighWarningPortn | read-only | current | OSC Bias Current High Warning :This OID indicates the OSC bias current is higher than the warning threshold <Help> This alarm indicates the OSC bias current is… |
| 1.3.6.1.4.1.20044.61.3 | Nodepmoabphcsmeasures | |||
| 1.3.6.1.4.1.20044.61.3.1 | NodepmoabphcsMesrOther | |||
| 1.3.6.1.4.1.20044.61.3.1.80 | ScalarpmoabphcsMesrtempMeas | read-only | current | Module Temperature :This OID gives the temperature of the PM (Temperature =AV/256) (Unit = C) <Help> This measure gives the temperature of the module |
| 1.3.6.1.4.1.20044.61.3.2 | NodepmoabphcsMesrClient | |||
| 1.3.6.1.4.1.20044.61.3.2.32 | ScalarpmoabphcsMesrclientEdfaBiasMeas | read-only | current | Pre-Amp Pump Laser Current :This OID gives the pump laser current of the Pre-Amp Optical Module (Current =AV/100) (Unit = mA) <Help> This measure gives the bia… |
| 1.3.6.1.4.1.20044.61.3.2.33 | ScalarpmoabphcsMesrclientEdfaTxpwrMeas | read-only | current | Pre-Amp Tx Power :This OID gives the transmit power value of the Pre-Amp Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure gives the Tx… |
| 1.3.6.1.4.1.20044.61.3.2.34 | ScalarpmoabphcsMesrclientEdfaRxpwrMeas | read-only | current | Pre-Amp Rx Power :This OID gives the receive power value of the Pre-Amp Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure gives the Rx … |
| 1.3.6.1.4.1.20044.61.3.2.35 | ScalarpmoabphcsMesrclientEdfaGainMeas | read-only | current | Pre-Amp Gain Target :This OID gives the gain value of the Pre-Amp Module (Gain =(AV-32768)*0,005) (Unit = dB) <Help> This information gives the target gain of … |
| 1.3.6.1.4.1.20044.61.3.2.36 | ScalarpmoabphcsMesrclientOscSpanLoss | read-only | current | Pre-Amp Input Span Loss :This OID indicates the attenuation of the span connected to the Pre-amp input (Power =(AV-32768)*0,005) (Unit = dB) <Help> This measur… |
| 1.3.6.1.4.1.20044.61.3.2.37 | ScalarpmoabphcsMesrclientOscSpanLossRef | read-only | current | Pre-Amp Input Span Loss Ref :This OID indicates the referenced attenuation of the span connected to the Pre-amp input (Used to monitor the variation of the spa… |
| 1.3.6.1.4.1.20044.61.3.2.38 | ScalarpmoabphcsMesrclientCorrectedGain | read-only | current | Pre-Amp Gain :This OID gives the gain value of the Pre-Amp Module corrected by the ASE compensation mechanism (Gain =(AV-32768)*0,005) (Unit = dB) <Help> This … |
| 1.3.6.1.4.1.20044.61.3.2.39 | ScalarpmoabphcsMesrclientMsaInputPower | read-only | current | Pre-Amp MSA Rx Power :This OID indicates the input power of the Mid Stage Access of the Pre-Amp (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indi… |
| 1.3.6.1.4.1.20044.61.3.2.40 | ScalarpmoabphcsMesrclientMsaOutputPower | read-only | current | Pre-Amp MSA Tx Power :This OID indicates the output power of the Mid Stage Access of the Pre-Amp (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure ind… |
| 1.3.6.1.4.1.20044.61.3.2.41 | ScalarpmoabphcsMesrclientMsaAttenuation | read-only | current | Pre-Amp MSA Attenuation :This OID indicates the attenuation applied on the Mid Stage Access of the Pre-Amp (Attenuation =(AV-32768)*0,005) (Unit = dB) <Help> T… |
| 1.3.6.1.4.1.20044.61.3.2.42 | ScalarpmoabphcsMesrclientMsaAttenuationRef | read-only | current | Pre-Amp MSA Attenuation Ref :This OID indicates the reference attenuation stored for the Mid Stage Access of the In-Line1 (Used to monitor the variation of thi… |
| 1.3.6.1.4.1.20044.61.3.3 | NodepmoabphcsMesrLine | |||
| 1.3.6.1.4.1.20044.61.3.3.48 | ScalarpmoabphcsMesrlineEdfaBiasMeas | read-only | current | Booster Pump Laser Current :This OID gives the pump laser current of the Booster Optical Module (Current =AV/100) (Unit = mA) <Help> This measure gives the bia… |
| 1.3.6.1.4.1.20044.61.3.3.49 | ScalarpmoabphcsMesrlineEdfaTxpwrMeas | read-only | current | Booster Tx Power :This OID gives the transmit power value of the Booster Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure gives the Tx… |
| 1.3.6.1.4.1.20044.61.3.3.50 | ScalarpmoabphcsMesrlineEdfaRxpwrMeas | read-only | current | Booster Rx Power :This OID gives the receive power value of the Booster Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure gives the Rx … |
| 1.3.6.1.4.1.20044.61.3.3.51 | ScalarpmoabphcsMesrlineEdfaGainMeas | read-only | current | Booster Gain Target :This OID gives the gain value of the Booster Module (Gain =(AV-32768)*0,005) (Unit = dB) <Help> This information gives the target gain of … |
| 1.3.6.1.4.1.20044.61.3.3.52 | ScalarpmoabphcsMesrlineOscSpanLoss | read-only | current | Booster Input Span Loss :This OID indicates the attenuation of the span connected to the Booster input (Power =(AV-32768)*0,005) (Unit = dB) <Help> This measur… |
| 1.3.6.1.4.1.20044.61.3.3.53 | ScalarpmoabphcsMesrlineOscSpanLossRef | read-only | current | Booster Input Span Loss Ref :This OID indicates the referenced attenuation of the span connected to the Booster input (Used to monitor the variation of the spa… |
| 1.3.6.1.4.1.20044.61.3.3.54 | ScalarpmoabphcsMesrlineCorrectedGain | read-only | current | Booster Gain :This OID gives the gain value of the Booster Module corrected by the ASE compensation mechanism (Gain =(AV-32768)*0,005) (Unit = dB) <Help> This … |
| 1.3.6.1.4.1.20044.61.3.3.55 | ScalarpmoabphcsMesrlineMsaInputPower | read-only | current | Booster MSA Rx Power :This OID indicates the input power of the Mid Stage Access of the Booster (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indi… |
| 1.3.6.1.4.1.20044.61.3.3.56 | ScalarpmoabphcsMesrlineMsaOutputPower | read-only | current | Booster MSA Tx Power :This OID indicates the output power of the Mid Stage Access of the Booster (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure ind… |
| 1.3.6.1.4.1.20044.61.3.3.57 | ScalarpmoabphcsMesrlineMsaAttenuation | read-only | current | Booster MSA Attenuation :This OID indicates the attenuation applied on the Mid Stage Access of the Booster (Attenuation =(AV-32768)*0,005) (Unit = dB) <Help> T… |
| 1.3.6.1.4.1.20044.61.3.3.58 | ScalarpmoabphcsMesrlineMsaAttenuationRef | read-only | current | Booster MSA Attenuation Ref :This OID indicates the reference attenuation stored for the Mid Stage Access of the Booster (Used to monitor the variation of this… |
| 1.3.6.1.4.1.20044.61.3.3.64 | TablepmoabphcsMesrlineOscTxPowerTable | not-accessible | current | List of pmoabphcsMesrlineOscTxPower Article |
| 1.3.6.1.4.1.20044.61.3.3.64.1 | RowpmoabphcsMesrlineOscTxPowerEntry | not-accessible | current | Row definition for the pmoabphcsMesrlineOscTxPower table |
| 1.3.6.1.4.1.20044.61.3.3.64.1.1 | ColumnpmoabphcsMesrlineOscTxPowerIndex | read-only | current | Index definition for the pmoabphcsMesrlineOscTxPower table |
| 1.3.6.1.4.1.20044.61.3.3.64.1.2 | ColumnpmoabphcsMesrlineOscTxPowerPortn | read-only | current | OSC Tx Power :This OID indicates the output power of the OSC (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indicates the output power of the OSC |
| 1.3.6.1.4.1.20044.61.3.3.65 | TablepmoabphcsMesrlineOscRxPowerTable | not-accessible | current | List of pmoabphcsMesrlineOscRxPower Article |
| 1.3.6.1.4.1.20044.61.3.3.65.1 | RowpmoabphcsMesrlineOscRxPowerEntry | not-accessible | current | Row definition for the pmoabphcsMesrlineOscRxPower table |
| 1.3.6.1.4.1.20044.61.3.3.65.1.1 | ColumnpmoabphcsMesrlineOscRxPowerIndex | read-only | current | Index definition for the pmoabphcsMesrlineOscRxPower table |
| 1.3.6.1.4.1.20044.61.3.3.65.1.2 | ColumnpmoabphcsMesrlineOscRxPowerPortn | read-only | current | OSC Rx Power :This OID indicates the input power of the OSC (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indicates the input power of the OSC |
| 1.3.6.1.4.1.20044.61.4 | Nodepmoabphcscounters | |||
| 1.3.6.1.4.1.20044.61.4.1 | NodepmoabphcsCntOther | |||
| 1.3.6.1.4.1.20044.61.4.2 | NodepmoabphcsCntClient | |||
| 1.3.6.1.4.1.20044.61.4.3 | NodepmoabphcsCntLine | |||
| 1.3.6.1.4.1.20044.61.4.3.16 | TablepmoabphcsCntlineOscErrTable | not-accessible | current | List of pmoabphcsCntlineOscErr Article |
| 1.3.6.1.4.1.20044.61.4.3.16.1 | RowpmoabphcsCntlineOscErrEntry | not-accessible | current | Row definition for the pmoabphcsCntlineOscErr table |
| 1.3.6.1.4.1.20044.61.4.3.16.1.1 | ColumnpmoabphcsCntlineOscErrIndex | read-only | current | Index definition for the pmoabphcsCntlineOscErr table |
| 1.3.6.1.4.1.20044.61.4.3.16.1.2 | ColumnpmoabphcsCntlineOscErrValuePortn | read-only | current | OSC FEC Counter :This OID indicates the number of errors corrected by the FEC of the OSC<Help> This measure indicates the number of errors corrected by the FEC… |
| 1.3.6.1.4.1.20044.61.4.3.16.1.3 | ColumnpmoabphcsCntlineOscErrErrorPortn | read-only | current | B1 Counter Error :This OID when set indicates the B1 counter value is invalid on Port |
| 1.3.6.1.4.1.20044.61.4.3.16.1.4 | ColumnpmoabphcsCntlineOscErrOverloadPortn | read-only | current | B1 Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.61.4.259 | ScalarpmoabphcsCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.61.4.260 | ScalarpmoabphcsCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.61.6 | NodepmoabphcscontrolsWrite | |||
| 1.3.6.1.4.1.20044.61.6.1 | NodepmoabphcsCtrlOther | |||
| 1.3.6.1.4.1.20044.61.6.1.0 | NodepmoabphcsCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.61.6.1.0.1 | ScalarpmoabphcsCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.61.6.1.0.9 | ScalarpmoabphcsCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.61.6.1.0.13 | ScalarpmoabphcsCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.61.6.1.5 | NodepmoabphcsCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.61.6.1.5.2 | ScalarpmoabphcsCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.61.6.1.5.3 | ScalarpmoabphcsCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.61.6.1.73 | NodepmoabphcsCtrlledTest | |||
| 1.3.6.1.4.1.20044.61.6.1.73.1 | ScalarpmoabphcsCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.61.6.1.73.2 | ScalarpmoabphcsCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.61.6.1.73.3 | ScalarpmoabphcsCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.61.6.1.75 | NodepmoabphcsCtrlmaintMode | |||
| 1.3.6.1.4.1.20044.61.6.1.75.1 | ScalarpmoabphcsCtrlMaintenance | read-write | current | PM Maintenance Mode :This OID sets the PM in maintenance mode <Help> This control enables the maintenance mode of the module |
| 1.3.6.1.4.1.20044.61.6.1.76 | NodepmoabphcsCtrlaprRestart | |||
| 1.3.6.1.4.1.20044.61.6.1.76.1 | ScalarpmoabphcsCtrlAprManualRestart | read-write | current | APR Manual Restart :This OID initiates the Restart mechanism to retrieve from the APR state.<Help> This control initiates the Restart mechanism to retrieve fro… |
| 1.3.6.1.4.1.20044.61.6.2 | NodepmoabphcsCtrlClient | |||
| 1.3.6.1.4.1.20044.61.6.2.33 | NodepmoabphcsCtrlclientOscInputSpanLoss | |||
| 1.3.6.1.4.1.20044.61.6.2.33.1 | ScalarpmoabphcsCtrlClientSpanLoss | read-write | current | Store Pre-Amp Input Span Loss :This OID stores the current input span Loss as a reference to monitor the span loss variation <Help> This parameter stores the c… |
| 1.3.6.1.4.1.20044.61.6.2.34 | ScalarpmoabphcsCtrlclientGainCstMonitorValue | read-write | current | Pre-Amp Fiber Aging Period :This OID sets the value of the monitoring period to detect a fiber aging. (Unit = s) This value sets the monitoring period to detec… |
| 1.3.6.1.4.1.20044.61.6.2.36 | ScalarpmoabphcsCtrlclientGainSettingValue | read-write | current | Pre-Amp Gain Target :This OID sets the value of the nominal gain of the Pre-Amplifier Module (active only in constant output power mode) (AV=(Gain/0,005) + 327… |
| 1.3.6.1.4.1.20044.61.6.2.37 | NodepmoabphcsCtrlclientGainProcessing | |||
| 1.3.6.1.4.1.20044.61.6.2.37.1 | ScalarpmoabphcsCtrlClientGainProc | read-write | current | Pre-Amp Gain Adjustment :This OID initiates the automatic nominal gain adjustment on the Pre-Amplifier Module<Help> This control initiates the automatic nomina… |
| 1.3.6.1.4.1.20044.61.6.2.38 | ScalarpmoabphcsCtrlclientGainCstFiberAgingMarginValue | read-write | current | Pre-Amp Aging Threshold :This OID sets the threshold to consider the power drop as a fiber aging. (active only in constant gain mode) (AV=(Gain/0,005) + 32768)… |
| 1.3.6.1.4.1.20044.61.6.2.40 | NodepmoabphcsCtrlclientMsaAttenuationValue | |||
| 1.3.6.1.4.1.20044.61.6.2.40.1 | ScalarpmoabphcsCtrlClientAttenuation | read-write | current | Store Pre-Amp MSA Attenuation :This OID stores the current attenuation applied on the Mid Stage Access of the Pre-Amp (used for monitoring the MSA attenuation … |
| 1.3.6.1.4.1.20044.61.6.3 | NodepmoabphcsCtrlLine | |||
| 1.3.6.1.4.1.20044.61.6.3.49 | NodepmoabphcsCtrllineOscInputSpanLoss | |||
| 1.3.6.1.4.1.20044.61.6.3.49.1 | ScalarpmoabphcsCtrlLineSpanLoss | read-write | current | Store Booster Input Span Loss :This OID stores the current input span Loss as a reference to monitor the span loss variation<Help> This parameter stores the cu… |
| 1.3.6.1.4.1.20044.61.6.3.50 | ScalarpmoabphcsCtrllineGainCstMonitorValue | read-write | current | Booster Fiber Aging Period :This OID sets the value of the monitoring period to detect a fiber aging. (Unit = s) This value sets the monitoring period to detec… |
| 1.3.6.1.4.1.20044.61.6.3.52 | ScalarpmoabphcsCtrllineGainSettingValue | read-write | current | Booster Gain Target :This OID sets the value of the nominal gain of the Booster Module (active only in constant output power mode) (AV=(Gain/0,005) + 32768) (U… |
| 1.3.6.1.4.1.20044.61.6.3.53 | NodepmoabphcsCtrllineGainProcessing | |||
| 1.3.6.1.4.1.20044.61.6.3.53.1 | ScalarpmoabphcsCtrlLineGainProc | read-write | current | Booster Gain Adjustment :This OID initiates the automatic nominal gain adjustment on the Booster Module<Help> This control initiates the automatic nominal gain… |
| 1.3.6.1.4.1.20044.61.6.3.54 | ScalarpmoabphcsCtrllineGainCstFiberAgingMarginValue | read-write | current | Booster Aging Threshold :This OID sets the threshold to consider the power drop as a fiber aging. (active only in constant gain mode) (AV=(Gain/0,005) + 32768)… |
| 1.3.6.1.4.1.20044.61.6.3.56 | NodepmoabphcsCtrllineMsaAttenuationValue | |||
| 1.3.6.1.4.1.20044.61.6.3.56.1 | ScalarpmoabphcsCtrlLineAttenuation | read-write | current | Store Booster MSA Attenuation :This OID stores the current attenuation applied on the Mid Stage Access of the Booster (used for monitoring the MSA attenuation … |
| 1.3.6.1.4.1.20044.61.7 | Nodepmoabphcsri | |||
| 1.3.6.1.4.1.20044.61.7.2 | ScalarpmoabphcsRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.61.7.3 | ScalarpmoabphcsRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.61.7.4 | ScalarpmoabphcsRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.61.7.5 | ScalarpmoabphcsRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.61.7.6 | ScalarpmoabphcsRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the gateware platform. |
| 1.3.6.1.4.1.20044.61.7.7 | TablepmoabphcsRinvBoosterTable | not-accessible | current | List of the Boosters on the selected module |
| 1.3.6.1.4.1.20044.61.7.7.1 | RowpmoabphcsRinvBoosterEntry | not-accessible | current | Row definition for the Boosters table |
| 1.3.6.1.4.1.20044.61.7.7.1.1 | ColumnpmoabphcsRinvBoosterIndex | read-only | current | Index for Booster table |
| 1.3.6.1.4.1.20044.61.7.7.1.2 | ColumnpmoabphcsRinvBooster | read-only | current | Inventory for the Booster: This OID contains the inventory for the Booster |
| 1.3.6.1.4.1.20044.61.7.8 | TablepmoabphcsRinvPreAmpTable | not-accessible | current | List of the PreAmps on the selected module |
| 1.3.6.1.4.1.20044.61.7.8.1 | RowpmoabphcsRinvPreAmpEntry | not-accessible | current | Row definition for the PreAmp table |
| 1.3.6.1.4.1.20044.61.7.8.1.1 | ColumnpmoabphcsRinvPreAmpIndex | read-only | current | Index for PreAmp table |
| 1.3.6.1.4.1.20044.61.7.8.1.2 | ColumnpmoabphcsRinvPreAmp | read-only | current | Inventory for the PreAmp: This OID contains the inventory for the PreAmp |
| 1.3.6.1.4.1.20044.61.9 | NodepmoabphcsConfig | |||
| 1.3.6.1.4.1.20044.61.9.1 | NodepmoabphcsCfgNoValue | |||
| 1.3.6.1.4.1.20044.61.9.1.1 | NodepmoabphcstableclientStartup | |||
| 1.3.6.1.4.1.20044.61.9.1.1.2 | ScalarpmoabphcsCfgclientEdfaLaserCtrl | read-write | current | Default Settings on Client Laser :This OID configures the default initialisation settings on the client laser. |
| 1.3.6.1.4.1.20044.61.9.1.1.3 | ScalarpmoabphcsCfgclientEdfaLaserMode | read-write | current | Default Settings on Client mode :This OID configures the default mode on the client amplifier. |
| 1.3.6.1.4.1.20044.61.9.1.1.4 | ScalarpmoabphcsCfgclientGainValue | read-write | current | Default Settings on Client Gain :This OID configures the default gain on the client amplifier. |
| 1.3.6.1.4.1.20044.61.9.1.1.5 | ScalarpmoabphcsCfgclientTiltValue | read-write | current | Default Settings on Client Tilt :This OID configures the default tilt on the client amplifier. |
| 1.3.6.1.4.1.20044.61.9.1.1.6 | ScalarpmoabphcsCfgclientMsaLoss | read-write | current | Default Settings on Client MSA :This OID configures the default MSA value on the client amplifier. |
| 1.3.6.1.4.1.20044.61.9.1.1.7 | ScalarpmoabphcsCfgclientOutputPowerValue | read-write | current | Default Settings on Client Output power :This OID configures the default Output power value on the client amplifier. |
| 1.3.6.1.4.1.20044.61.9.1.1.8 | ScalarpmoabphcsCfgclientAseCompensation | read-write | current | Default Settings on Client ASE :This OID configures the default ASE compensation value on the client amplifier. |
| 1.3.6.1.4.1.20044.61.9.2 | NodepmoabphcsCfgLineStartUp | |||
| 1.3.6.1.4.1.20044.61.9.2.1 | NodepmoabphcstablelineStartup | |||
| 1.3.6.1.4.1.20044.61.9.2.1.2 | ScalarpmoabphcsCfglineEdfaLaserCtrl | read-write | current | Default Settings on Line Laser :This OID configures the default initialisation settings on the line laser. |
| 1.3.6.1.4.1.20044.61.9.2.1.3 | ScalarpmoabphcsCfglineEdfaLaserMode | read-write | current | Default Settings on Line mode :This OID configures the default mode on the line amplifier. |
| 1.3.6.1.4.1.20044.61.9.2.1.4 | ScalarpmoabphcsCfglineGainValue | read-write | current | Default Settings on Line Gain :This OID configures the default gain on the line amplifier. |
| 1.3.6.1.4.1.20044.61.9.2.1.5 | ScalarpmoabphcsCfglineTiltValue | read-write | current | Default Settings on Line Tilt :This OID configures the default tilt on the line amplifier. |
| 1.3.6.1.4.1.20044.61.9.2.1.6 | ScalarpmoabphcsCfglineMsaLoss | read-write | current | Default Settings on Line MSA :This OID configures the default MSA value on the line amplifier. |
| 1.3.6.1.4.1.20044.61.9.2.1.7 | ScalarpmoabphcsCfglineOutputPowerValue | read-write | current | Default Settings on Line Output power :This OID configures the default Output power value on the line amplifier. |
| 1.3.6.1.4.1.20044.61.9.2.1.8 | ScalarpmoabphcsCfglineAseCompensation | read-write | current | Default Settings on Line ASE :This OID configures the default ASE compensation value on the line amplifier. |
| 1.3.6.1.4.1.20044.61.9.2.1.11 | ScalarpmoabphcsCfgaprMode | read-write | current | Default setting on module :This OID configures the default mode on the APR |
| 1.3.6.1.4.1.20044.61.9.3 | NodepmoabphcsCfgClientSupvStartUp | |||
| 1.3.6.1.4.1.20044.61.9.3.1 | TablepmoabphcsCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.61.9.3.1.1 | RowpmoabphcsCfgLineStartupEntry | not-accessible | current | Row definition for the clientSupvStartUp table |
| 1.3.6.1.4.1.20044.61.9.3.1.1.1 | ColumnpmoabphcsCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.61.9.3.1.1.3 | ColumnpmoabphcsCfgLineOscLaserCtrlPortn | read-write | current | Default Settings on OSC Laser :This OID configures the default initialisation settings on the OSC |
| 1.3.6.1.4.1.20044.61.9.3.1.1.4 | ColumnpmoabphcsCfgLineOscOosPortn | read-write | current | Default Settings on OSC mode :This OID configures the default mode on the OSC |
| 1.3.6.1.4.1.20044.61.9.3.1.1.5 | ColumnpmoabphcsCfgLineOscSpanLengthPortn | read-write | current | Default Settings on OSC span length :This OID defines the length of the span connected on the OSC port |
| 1.3.6.1.4.1.20044.61.9.3.1.1.6 | ColumnpmoabphcsCfgLineOscCorrectionFactorPortn | read-write | current | Default Settings on OSC attenuation corrector factor :This OID defines the correction factor to apply on the span attenuation measure on the OSC Channel (1510)… |
| 1.3.6.1.4.1.20044.61.9.4 | NodepmoabphcsCfgLabels | |||
| 1.3.6.1.4.1.20044.61.9.4.1 | TablepmoabphcsCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.61.9.4.1.1 | RowpmoabphcsCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.61.9.4.1.1.1 | ColumnpmoabphcsCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.61.9.4.1.1.3 | ColumnpmoabphcsCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.61.9.4.2 | TablepmoabphcsCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.61.9.4.2.1 | RowpmoabphcsCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.61.9.4.2.1.1 | ColumnpmoabphcsCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.61.9.4.2.1.3 | ColumnpmoabphcsCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.61.9.257 | ScalarpmoabphcsCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.61.10 | Nodepmoabphcstraps | |||
| 1.3.6.1.4.1.20044.61.10.4 | ScalarpmoabphcstrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.61.10.34 | NotificationpmoabphcsLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.61.10.35 | NotificationpmoabphcsLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.61.10.44 | NotificationpmoabphcsClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.61.10.45 | NotificationpmoabphcsClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.61.10.50 | NotificationpmoabphcsPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.61.10.51 | NotificationpmoabphcsPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PmoabphcsaprMode | INTEGER { oabphcsaproffmode(0), oabphcsaprsemiautomode(1), oabphcsaprautomode(2) oabphcsaprlossforwardingmode(3) oabphcsaprrepeatmode(4) } | current | Different modes on APR |
| PmoabphcsBoosterCstGainAdjMode | INTEGER { oabphcsboostercstgainadjsemiautomode(1), oabphcsboostercstgainadjautomode(2) } | current | Different modes when constant Gain |
| PmoabphcsBoosterGainAdjMode | INTEGER { oabphcsboostergainadjmanualmode(0), oabphcsboostergainadjsemiautomode(1), oabphcsboostergainadjautomode(2) } | current | Different modes on Gain |
| PmoabphcsboosterMode | INTEGER { oabphcsboosterdefaultmode(0), oabphcsboosterconstantcurrentmode(1), oabphcsboosterconstantpowermode(2) oabphcsboosterconstantgainmode(3) oabphcsboosterpoutpinmode(4) oabphcsboostermanualmode(5) oabphcsboosterfeedforwardmode(6) oabphcsboostertransientsupmode(7) } | current | Different modes on OA booster |
| PmoabphcsPreampCstGainAdjMode | INTEGER { oabphcspreampcstgainadjsemiautomode(1), oabphcspreampcstgainadjautomode(2) } | current | Different modes when constant Gain |
| PmoabphcsPreampGainAdjMode | INTEGER { oabphcspreampgainadjmanualmode(0), oabphcspreampgainadjsemiautomode(1), oabphcspreampgainadjautomode(2) } | current | Different modes on Gain |
| PmoabphcspreampMode | INTEGER { oabphcspreampdefaultmode(0), oabphcspreampconstantcurrentmode(1), oabphcspreampconstantpowermode(2) oabphcspreampconstantgainmode(3) oabphcspreamppoutpinmode(4) oabphcspreampmanualmode(5) oabphcspreampfeedforwardmode(6) oabphcspreamptransientsupmode(7) } | current | Different modes on OA preamp |