EKINOPS-Pmops2d-MIB
145 objects
MIB for the Ekinops Pmops2d hardware.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.71 | IdentitymodulePmops2d | MIB for the Ekinops Pmops2d hardware. | ||
| 1.3.6.1.4.1.20044.71.2 | Nodepmops2dalarms | |||
| 1.3.6.1.4.1.20044.71.2.1 | Nodepmops2dAlmOther | |||
| 1.3.6.1.4.1.20044.71.2.1.1 | Nodepmops2dAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.71.2.1.1.64 | Nodepmops2dAlmswitchOutOfService | |||
| 1.3.6.1.4.1.20044.71.2.1.1.64.1 | Scalarpmops2dAlmOpsaOutofservice | read-only | current | OPS A Out Of Service :This OID indicates that the OPSA is In Service (1) of Out or Service (2). <Help> This status indicates if the OPS is in service <Condtype… |
| 1.3.6.1.4.1.20044.71.2.1.1.64.2 | Scalarpmops2dAlmOpsbOutofservice | read-only | current | OPS B Out Of Service :This OID indicates that the OPSB is In Service (1) of Out or Service (2). <Help> This status indicates if the OPS is in service <Condtype… |
| 1.3.6.1.4.1.20044.71.2.1.2 | Nodepmops2dAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.71.2.1.3 | Nodepmops2dAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.71.2.1.3.0 | Nodepmops2dAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.71.2.1.3.0.9 | Scalarpmops2dAlmModuleGlobFailure | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MODULE_GLOB_FAILURE <Probcause> equipmentMalfunction (16) <Alarmty… |
| 1.3.6.1.4.1.20044.71.2.1.3.0.15 | Scalarpmops2dAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.71.2.1.3.0.16 | Scalarpmops2dAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.71.2.2 | Nodepmops2dAlmClient | |||
| 1.3.6.1.4.1.20044.71.2.2.1 | Nodepmops2dAlmClientNurg | |||
| 1.3.6.1.4.1.20044.71.2.2.2 | Nodepmops2dAlmClientUrg | |||
| 1.3.6.1.4.1.20044.71.2.2.2.24 | Tablepmops2dAlmclientComAlarmTable | not-accessible | current | List of pmops2dAlmclientComAlarm Article |
| 1.3.6.1.4.1.20044.71.2.2.2.24.1 | Rowpmops2dAlmclientComAlarmEntry | not-accessible | current | Row definition for the pmops2dAlmclientComAlarm table |
| 1.3.6.1.4.1.20044.71.2.2.2.24.1.1 | Columnpmops2dAlmclientComAlarmIndex | read-only | current | Index definition for the pmops2dAlmclientComAlarm table |
| 1.3.6.1.4.1.20044.71.2.2.2.24.1.9 | Columnpmops2dAlmClientComSwitchFailPortn | read-only | current | Switch Fail :This OID indicates the OPS A switch component in in fail condition <Help> This alarm indicates if the OPS switch is in fail condition <Condtype> C… |
| 1.3.6.1.4.1.20044.71.2.2.3 | Nodepmops2dAlmClientCrit | |||
| 1.3.6.1.4.1.20044.71.2.2.3.8 | Tablepmops2dAlmsynthClientAlmTable | not-accessible | current | List of pmops2dAlmsynthClientAlm Article |
| 1.3.6.1.4.1.20044.71.2.2.3.8.1 | Rowpmops2dAlmsynthClientAlmEntry | not-accessible | current | Row definition for the pmops2dAlmsynthClientAlm table |
| 1.3.6.1.4.1.20044.71.2.2.3.8.1.1 | Columnpmops2dAlmsynthClientAlmIndex | read-only | current | Index definition for the pmops2dAlmsynthClientAlm table |
| 1.3.6.1.4.1.20044.71.2.2.3.8.1.5 | Columnpmops2dAlmClientHwFailAccPortn | read-only | current | HW_Fail_Acc :This OID indicates a client hardware failure on the OPS <Help> This alarm indicates if a client HW fail access Alarm has been detected on the OPS … |
| 1.3.6.1.4.1.20044.71.2.2.3.8.1.13 | Columnpmops2dAlmClientFailAccPortn | read-only | current | Client_Acc_Fail :This OID indicates a client failure on the OPS <Help> This alarm indicates if a client fail access Alarm has been detected on the OPS <Condtyp… |
| 1.3.6.1.4.1.20044.71.2.3 | Nodepmops2dAlmLine | |||
| 1.3.6.1.4.1.20044.71.2.3.1 | Nodepmops2dAlmLineNurg | |||
| 1.3.6.1.4.1.20044.71.2.3.1.48 | Tablepmops2dAlmlineMeasWngTable | not-accessible | current | List of pmops2dAlmlineMeasWng Article |
| 1.3.6.1.4.1.20044.71.2.3.1.48.1 | Rowpmops2dAlmlineMeasWngEntry | not-accessible | current | Row definition for the pmops2dAlmlineMeasWng table |
| 1.3.6.1.4.1.20044.71.2.3.1.48.1.1 | Columnpmops2dAlmlineMeasWngIndex | read-only | current | Index definition for the pmops2dAlmlineMeasWng table |
| 1.3.6.1.4.1.20044.71.2.3.1.48.1.2 | Columnpmops2dAlmLineTxPwrLowWngPortn | read-only | current | Tx Low Warning :This OID indicates that Transmit power or the OPS is lower than the warning threshold of the OPS <Help> This warning indicates if the receive p… |
| 1.3.6.1.4.1.20044.71.2.3.1.48.1.3 | Columnpmops2dAlmLineTxPwrHighWngPortn | read-only | current | Tx High Warning : This OID indicates that Transmit power or the OPS is higher than the warning threshold of the OPS <Help> This warning indicates if the receiv… |
| 1.3.6.1.4.1.20044.71.2.3.1.48.1.4 | Columnpmops2dAlmLineRxPwrLowWngPortn | read-only | current | Rx Low Warning :This OID indicates that Receive power or the OPS is lower than the warning threshold of the OPS <Help> This warning indicates if the receive po… |
| 1.3.6.1.4.1.20044.71.2.3.1.48.1.5 | Columnpmops2dAlmLineRxPwrHighWngPortn | read-only | current | Rx High Warning : This OID indicates that Receive power or the OPS is higher than the warning threshold of the OPS <Help> This warning indicates if the receive… |
| 1.3.6.1.4.1.20044.71.2.3.2 | Nodepmops2dAlmLineUrg | |||
| 1.3.6.1.4.1.20044.71.2.3.2.32 | Tablepmops2dAlmlineAlarmTable | not-accessible | current | List of pmops2dAlmlineAlarm Article |
| 1.3.6.1.4.1.20044.71.2.3.2.32.1 | Rowpmops2dAlmlineAlarmEntry | not-accessible | current | Row definition for the pmops2dAlmlineAlarm table |
| 1.3.6.1.4.1.20044.71.2.3.2.32.1.1 | Columnpmops2dAlmlineAlarmIndex | read-only | current | Index definition for the pmops2dAlmlineAlarm table |
| 1.3.6.1.4.1.20044.71.2.3.2.32.1.2 | Columnpmops2dAlmLosRxPortn | read-only | current | RX Loss Of Signal :This OID indicates that a LOS is detected on the Receive 1 of the OPS <Help> This alarm indicates if an optical signal is detected on the RX… |
| 1.3.6.1.4.1.20044.71.2.3.2.32.1.4 | Columnpmops2dAlmLosTxPortn | read-only | current | TX Loss Of Signal :This OID indicates that a LOS is detected on the Transmit of the OPS <Help> This alarm indicates if an optical signal is detected on the TX … |
| 1.3.6.1.4.1.20044.71.2.3.2.32.1.6 | Columnpmops2dAlmSwitchPositionOnePortn | read-only | current | RX1 Selected :This OID indicates the OPS selects the RX 1 input <Help> This status indicates if the RX 1 input is selected on the OPS <Condtype> SWITCH_POSITIO… |
| 1.3.6.1.4.1.20044.71.2.3.2.32.1.7 | Columnpmops2dAlmSwitchPositionTwoPortn | read-only | current | RX2 Selected :This OID indicates the OPS selects the RX 2 input <Help> This status indicates if the RX2 input is selected on the OPS <Condtype> SWITCH_POSITION… |
| 1.3.6.1.4.1.20044.71.2.3.2.40 | Tablepmops2dAlmlineMeasAlaTable | not-accessible | current | List of pmops2dAlmlineMeasAla Article |
| 1.3.6.1.4.1.20044.71.2.3.2.40.1 | Rowpmops2dAlmlineMeasAlaEntry | not-accessible | current | Row definition for the pmops2dAlmlineMeasAla table |
| 1.3.6.1.4.1.20044.71.2.3.2.40.1.1 | Columnpmops2dAlmlineMeasAlaIndex | read-only | current | Index definition for the pmops2dAlmlineMeasAla table |
| 1.3.6.1.4.1.20044.71.2.3.2.40.1.2 | Columnpmops2dAlmLineTxPwrLowAlaPortn | read-only | current | Tx Low Alarm :This OID indicates that Transmit power or the OPS is lower than the alarm threshold of the OPS <Help> This alarm indicates if the receive power o… |
| 1.3.6.1.4.1.20044.71.2.3.2.40.1.3 | Columnpmops2dAlmLineTxPwrHighAlaPortn | read-only | current | Tx High Alarm : This OID indicates that Transmit power or the OPS is higher than the alarm threshold of the OPS <Help> This alarm indicates if the receive powe… |
| 1.3.6.1.4.1.20044.71.2.3.2.40.1.4 | Columnpmops2dAlmLineRxPwrLowAlaPortn | read-only | current | Rx Low Alarm :This OID indicates that Receive power or the OPS is lower than the alarm threshold of the OPS <Help> This alarm indicates if the receive power on… |
| 1.3.6.1.4.1.20044.71.2.3.2.40.1.5 | Columnpmops2dAlmLineRxPwrHighAlaPortn | read-only | current | Rx High Alarm : This OID indicates that Receive power of the OPS is higher than the alarm threshold of the OPS <Help> This alarm indicates if the receive power… |
| 1.3.6.1.4.1.20044.71.2.3.3 | Nodepmops2dAlmLineCrit | |||
| 1.3.6.1.4.1.20044.71.2.3.3.16 | Tablepmops2dAlmsynthLineAlmTable | not-accessible | current | List of pmops2dAlmsynthLineAlm Article |
| 1.3.6.1.4.1.20044.71.2.3.3.16.1 | Rowpmops2dAlmsynthLineAlmEntry | not-accessible | current | Row definition for the pmops2dAlmsynthLineAlm table |
| 1.3.6.1.4.1.20044.71.2.3.3.16.1.1 | Columnpmops2dAlmsynthLineAlmIndex | read-only | current | Index definition for the pmops2dAlmsynthLineAlm table |
| 1.3.6.1.4.1.20044.71.2.3.3.16.1.5 | Columnpmops2dAlmLineHwFailAccPortn | read-only | current | HW_Fail_Acc :This OID indicates a line hardware failure on the OPS <Help> This alarm indicates if a line HW fail access Alarm has been detected on the OPS <Con… |
| 1.3.6.1.4.1.20044.71.2.3.3.16.1.10 | Columnpmops2dAlmLineMeasWngPortn | read-only | current | Measure Warning :This OID indicates a line warning is present coming out of OPS diagnostic monitoring <Help> This alarm indicates if a line diagnostic monitori… |
| 1.3.6.1.4.1.20044.71.2.3.3.16.1.11 | Columnpmops2dAlmLineMeasAlmPortn | read-only | current | Measure Alarm :This OID indicates an line alarm is present coming out of OPS diagnostic monitoring <Help> This alarm indicates if a line diagnostic monitoring … |
| 1.3.6.1.4.1.20044.71.2.3.3.16.1.13 | Columnpmops2dAlmLineFailAccPortn | read-only | current | Line_Acc_Fail :This OID indicates a line failure on the OPS <Help> This alarm indicates if a line fail access Alarm has been detected on the OPS <Condtype> LIN… |
| 1.3.6.1.4.1.20044.71.3 | Nodepmops2dmeasures | |||
| 1.3.6.1.4.1.20044.71.3.1 | Nodepmops2dMesrOther | |||
| 1.3.6.1.4.1.20044.71.3.2 | Nodepmops2dMesrClient | |||
| 1.3.6.1.4.1.20044.71.3.3 | Nodepmops2dMesrLine | |||
| 1.3.6.1.4.1.20044.71.3.3.16 | Tablepmops2dMesrtxPowerTable | not-accessible | current | List of pmops2dMesrtxPower Article |
| 1.3.6.1.4.1.20044.71.3.3.16.1 | Rowpmops2dMesrtxPowerEntry | not-accessible | current | Row definition for the pmops2dMesrtxPower table |
| 1.3.6.1.4.1.20044.71.3.3.16.1.1 | Columnpmops2dMesrtxPowerIndex | read-only | current | Index definition for the pmops2dMesrtxPower table |
| 1.3.6.1.4.1.20044.71.3.3.16.1.2 | Columnpmops2dMesrtxPowerPortn | read-only | current | TX Power :This OID gives the transmit power value of the signal , read on the coupler output (Power=(AV-32768)*0.005) (Unit = dBm) <Help> This measure gives th… |
| 1.3.6.1.4.1.20044.71.3.3.24 | Tablepmops2dMesrrxPowerTable | not-accessible | current | List of pmops2dMesrrxPower Article |
| 1.3.6.1.4.1.20044.71.3.3.24.1 | Rowpmops2dMesrrxPowerEntry | not-accessible | current | Row definition for the pmops2dMesrrxPower table |
| 1.3.6.1.4.1.20044.71.3.3.24.1.1 | Columnpmops2dMesrrxPowerIndex | read-only | current | Index definition for the pmops2dMesrrxPower table |
| 1.3.6.1.4.1.20044.71.3.3.24.1.2 | Columnpmops2dMesrrxPowerPortn | read-only | current | RX Power :This OID gives the receive power value of the signal , read on the switch input (Power=(AV-32768)*0.005) (Unit = dBm) <Help> This measure gives the R… |
| 1.3.6.1.4.1.20044.71.6 | Nodepmops2dcontrolsWrite | |||
| 1.3.6.1.4.1.20044.71.6.1 | Nodepmops2dCtrlOther | |||
| 1.3.6.1.4.1.20044.71.6.1.0 | Nodepmops2dCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.71.6.1.0.1 | Scalarpmops2dCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.71.6.1.0.9 | Scalarpmops2dCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.71.6.1.0.13 | Scalarpmops2dCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.71.6.1.4 | Nodepmops2dCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.71.6.1.4.1 | Scalarpmops2dCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.71.6.1.4.2 | Scalarpmops2dCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.71.6.1.5 | Nodepmops2dCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.71.6.1.5.2 | Scalarpmops2dCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.71.6.1.5.3 | Scalarpmops2dCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.71.6.1.64 | Nodepmops2dCtrlledTest | |||
| 1.3.6.1.4.1.20044.71.6.1.64.1 | Scalarpmops2dCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.71.6.1.64.2 | Scalarpmops2dCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.71.6.1.64.3 | Scalarpmops2dCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.71.6.2 | Nodepmops2dCtrlClient | |||
| 1.3.6.1.4.1.20044.71.6.3 | Nodepmops2dCtrlLine | |||
| 1.3.6.1.4.1.20044.71.7 | Nodepmops2dri | |||
| 1.3.6.1.4.1.20044.71.7.1 | Nodepmops2driTable | |||
| 1.3.6.1.4.1.20044.71.7.1.1 | Tablepmops2dRinvSfpTable | not-accessible | current | List of the clients on the selected module |
| 1.3.6.1.4.1.20044.71.7.1.1.1 | Rowpmops2dRinvSfpEntry | not-accessible | current | Row definition for the client table |
| 1.3.6.1.4.1.20044.71.7.1.1.1.1 | Columnpmops2dRinvSfpIndex | read-only | current | Index for Sfp table |
| 1.3.6.1.4.1.20044.71.7.1.1.1.2 | Columnpmops2dRinvSfp | read-only | current | Inventory for the Clients: This OID contains the inventory for the clients |
| 1.3.6.1.4.1.20044.71.7.1.2 | Tablepmops2dRinvLineTable | not-accessible | current | List of the lines on the selected module |
| 1.3.6.1.4.1.20044.71.7.1.2.1 | Rowpmops2dRinvLineEntry | not-accessible | current | Row definition for the line table |
| 1.3.6.1.4.1.20044.71.7.1.2.1.1 | Columnpmops2dRinvLineIndex | read-only | current | Index for line table |
| 1.3.6.1.4.1.20044.71.7.1.2.1.2 | Columnpmops2dRinvLine | read-only | current | Inventory for the lines: This OID contains the inventory for the lines |
| 1.3.6.1.4.1.20044.71.7.2 | Scalarpmops2dRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.71.7.3 | Scalarpmops2dRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.71.7.4 | Scalarpmops2dRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.71.7.5 | Scalarpmops2dRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.71.9 | Nodepmops2dConfig | |||
| 1.3.6.1.4.1.20044.71.9.1 | Nodepmops2dCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.71.9.1.1 | Tablepmops2dCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.71.9.1.1.1 | Rowpmops2dCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.71.9.1.1.1.1 | Columnpmops2dCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.71.9.1.1.1.3 | Columnpmops2dCfgReservedPortn | read-write | current | : |
| 1.3.6.1.4.1.20044.71.9.2 | Nodepmops2dCfgStartUp | |||
| 1.3.6.1.4.1.20044.71.9.2.1 | Tablepmops2dCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.71.9.2.1.1 | Rowpmops2dCfgClientStartupEntry | not-accessible | current | Row definition for the startUp table |
| 1.3.6.1.4.1.20044.71.9.2.1.1.1 | Columnpmops2dCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.71.9.2.1.1.3 | Columnpmops2dCfgClientSwitchModePortn | read-write | current | Default setting on OPS switch :This register configures the default switch mode |
| 1.3.6.1.4.1.20044.71.9.2.2 | Tablepmops2dCfgLineStartupThreshTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.71.9.2.2.1 | Rowpmops2dCfgLineStartupThreshEntry | not-accessible | current | Row definition for the startUp table |
| 1.3.6.1.4.1.20044.71.9.2.2.1.1 | Columnpmops2dCfgLineStartupThreshIndex | read-only | current | Index definition for the lineStartupThresh table |
| 1.3.6.1.4.1.20044.71.9.2.2.1.4 | Columnpmops2dCfgLineRxPwrSettingPortn | read-write | current | Default setting on OPS Rx Pwr :This register configures the default RX1 Loss threshold on the OPS B (Unit = dBm) |
| 1.3.6.1.4.1.20044.71.9.3 | Nodepmops2dCfgOther | |||
| 1.3.6.1.4.1.20044.71.9.3.1 | Nodepmops2dtablemoduleOther | |||
| 1.3.6.1.4.1.20044.71.9.3.1.2 | Scalarpmops2dCfgoutOfService | read-write | current | Default Setting on the OOS of the OPS :This register configures the default mode on the OOS of the OPS |
| 1.3.6.1.4.1.20044.71.9.4 | Nodepmops2dCfgLabels | |||
| 1.3.6.1.4.1.20044.71.9.4.1 | Tablepmops2dCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.71.9.4.1.1 | Rowpmops2dCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.71.9.4.1.1.1 | Columnpmops2dCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.71.9.4.1.1.3 | Columnpmops2dCfgLabelclientPortn | read-write | current | Default settings on the label of the clients :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.71.9.4.2 | Tablepmops2dCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.71.9.4.2.1 | Rowpmops2dCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.71.9.4.2.1.1 | Columnpmops2dCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.71.9.4.2.1.3 | Columnpmops2dCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.71.9.257 | Scalarpmops2dCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.71.10 | Nodepmops2dtraps | |||
| 1.3.6.1.4.1.20044.71.10.2 | Scalarpmops2dtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.71.10.3 | Scalarpmops2dtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.71.10.4 | Scalarpmops2dtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.71.10.30 | Notificationpmops2dLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.71.10.31 | Notificationpmops2dLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.71.10.32 | Notificationpmops2dLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.71.10.33 | Notificationpmops2dLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.71.10.34 | Notificationpmops2dLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.71.10.35 | Notificationpmops2dLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.71.10.44 | Notificationpmops2dClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.71.10.45 | Notificationpmops2dClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.71.10.50 | Notificationpmops2dPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.71.10.51 | Notificationpmops2dPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pmops2dSwitchMode | INTEGER { switchManual1(1), switchManual2(2), switchAuto(4), switchAutoRevertive(8) } | current | different switch mode for port |