EKINOPS-Pmora14-MIB
147 objects
Creation
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.72 | Identitymodulepmora14 | Creation | ||
| 1.3.6.1.4.1.20044.72.2 | Nodepmora14alarms | |||
| 1.3.6.1.4.1.20044.72.2.1 | Nodepmora14AlmOther | |||
| 1.3.6.1.4.1.20044.72.2.1.1 | Nodepmora14AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.72.2.1.1.2 | Nodepmora14AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.72.2.1.1.2.1 | Scalarpmora14AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.72.2.1.1.2.2 | Scalarpmora14AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.72.2.1.1.2.3 | Scalarpmora14AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.72.2.1.1.75 | Nodepmora14AlmmoduleWarnings | |||
| 1.3.6.1.4.1.20044.72.2.1.1.75.1 | Scalarpmora14AlmModuleTempLowWarning | read-only | current | Module Temperature Low Warning :This OID indicates that the PM temperature if lower than the Warning threshold <Help> This alarm indicates if the module temper… |
| 1.3.6.1.4.1.20044.72.2.1.1.75.2 | Scalarpmora14AlmModuleTempHighWarning | read-only | current | Module Temperature High Warning :This OID indicates that the PM temperature if higher than the Warning threshold <Help> This alarm indicates if the module temp… |
| 1.3.6.1.4.1.20044.72.2.1.2 | Nodepmora14AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.72.2.1.2.74 | Nodepmora14AlmmoduleAlarms | |||
| 1.3.6.1.4.1.20044.72.2.1.2.74.1 | Scalarpmora14AlmModuleTempLowAlarm | read-only | current | Module Temperature Low Alarm :This OID indicates that the PM temperature if lower than the alarm threshold <Help> This alarm indicates if the module temperatur… |
| 1.3.6.1.4.1.20044.72.2.1.2.74.2 | Scalarpmora14AlmModuleTempHighAlarm | read-only | current | Module Temperature High Alarm :This OID indicates that the PM temperature is higher than the alarm threshold <Help> This alarm indicates if the module temperat… |
| 1.3.6.1.4.1.20044.72.2.1.3 | Nodepmora14AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.72.2.1.3.0 | Nodepmora14AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.72.2.1.3.0.1 | Scalarpmora14AlmMaintenanceMode | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode <Help> This status indiates if the module is currently in maintenance mode <Condtype> M… |
| 1.3.6.1.4.1.20044.72.2.1.3.0.2 | Scalarpmora14AlmAprOn | read-only | current | Automatic Power Reduction :This OID indicates that the APR algorithm has been operated and the output of the lasers are shutdown <Help> The APR algorithm has b… |
| 1.3.6.1.4.1.20044.72.2.1.3.0.9 | Scalarpmora14AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Help> This alarm <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (… |
| 1.3.6.1.4.1.20044.72.2.1.3.0.10 | Scalarpmora14AlmInitNotCompl | read-only | current | Raman Module Not Initialized :This OID indicates that the initialisation of the Raman module is not completed <Help> This status indicates if the Raman has bee… |
| 1.3.6.1.4.1.20044.72.2.1.3.0.15 | Scalarpmora14AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.72.2.1.3.0.16 | Scalarpmora14AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.72.2.2 | Nodepmora14AlmClient | |||
| 1.3.6.1.4.1.20044.72.2.2.1 | Nodepmora14AlmClientNurg | |||
| 1.3.6.1.4.1.20044.72.2.2.2 | Nodepmora14AlmClientUrg | |||
| 1.3.6.1.4.1.20044.72.2.2.3 | Nodepmora14AlmClientCrit | |||
| 1.3.6.1.4.1.20044.72.2.3 | Nodepmora14AlmLine | |||
| 1.3.6.1.4.1.20044.72.2.3.1 | Nodepmora14AlmLineNurg | |||
| 1.3.6.1.4.1.20044.72.2.3.1.33 | Nodepmora14AlmclientOraaWarnings | |||
| 1.3.6.1.4.1.20044.72.2.3.1.33.1 | Scalarpmora14AlmPump1CurrentHighWarning | read-only | current | Pump 1 Current High Warning :This OID indicates the Pump1 current is higher than the warning threshold <Help> This alarm indicates if the pump1 current is high… |
| 1.3.6.1.4.1.20044.72.2.3.1.33.2 | Scalarpmora14AlmPump2CurrentHighWarning | read-only | current | Pump 2 Current High Warning :This OID indicates the Pump2 current is higher than the warning threshold <Help> This alarm indicates if the pump2 current is high… |
| 1.3.6.1.4.1.20044.72.2.3.1.33.3 | Scalarpmora14AlmPump1TecWarning | read-only | current | Pump 1 TEC Warning :This OID indicates a transmit laser fail on pump 1 <Help> This alarm indicates if the laser of the pump1 is in fail condition <Condtype> PU… |
| 1.3.6.1.4.1.20044.72.2.3.1.33.4 | Scalarpmora14AlmPump2TecWarning | read-only | current | Pump 2 TEC Warning :This OID indicates a transmit laser fail on pump 2 <Help> This alarm indicates if the laser of the pump2 is in fail condition <Condtype> PU… |
| 1.3.6.1.4.1.20044.72.2.3.2 | Nodepmora14AlmLineUrg | |||
| 1.3.6.1.4.1.20044.72.2.3.2.7 | Nodepmora14AlmsynthAlm7 | |||
| 1.3.6.1.4.1.20044.72.2.3.2.7.4 | Scalarpmora14AlmLineHwFail | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on the HW Line port <… |
| 1.3.6.1.4.1.20044.72.2.3.2.7.5 | Scalarpmora14AlmPumpsTxOff | read-only | current | Pumps Laser Shutdown :This OID indicates the power of the pumps are both on <Help> This status indicates if the pumps lasers are both OFF <Condtype> PUMPS_TX_O… |
| 1.3.6.1.4.1.20044.72.2.3.2.7.12 | Scalarpmora14AlmLineFail | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the Line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.72.2.3.2.32 | Nodepmora14AlmclientOraAlarms1 | |||
| 1.3.6.1.4.1.20044.72.2.3.2.32.1 | Scalarpmora14AlmPump1CurrentHighAlarm | read-only | current | Pump 1 Current High Alarm :This OID indicates the Pump1 current is higher than the alarm threshold <Help> This alarm indicates if the pump1 current is higher t… |
| 1.3.6.1.4.1.20044.72.2.3.2.32.2 | Scalarpmora14AlmPump2CurrentHighAlarm | read-only | current | Pump 2 Current High Alarm :This OID indicates the Pump2 current is higher than the alarm threshold <Help> This alarm indicates if the pump2 current is higher t… |
| 1.3.6.1.4.1.20044.72.2.3.2.32.3 | Scalarpmora14AlmPump1TecAlarm | read-only | current | Pump 1 TEC Alarm :This OID indicates a transmit laser fail on pump 1 <Help> This alarm indicates if the laser of the pump1 is in fail condition <Condtype> PUMP… |
| 1.3.6.1.4.1.20044.72.2.3.2.32.4 | Scalarpmora14AlmPump2TecAlarm | read-only | current | Pump 2 TEC Alarm :This OID indicates a transmit laser fail on pump 2 <Help> This alarm indicates if the laser of the pump2 is in fail condition <Condtype> PUMP… |
| 1.3.6.1.4.1.20044.72.2.3.2.72 | Nodepmora14AlmfiberAlarms | |||
| 1.3.6.1.4.1.20044.72.2.3.2.72.1 | Scalarpmora14AlmSBandLossOfSignal | read-only | current | S Band Loss Of Signal :This OID indicates that a Loss of Signal is detected over the S-Band <Help> This alarm indicates that a Loss of Signal is detected over … |
| 1.3.6.1.4.1.20044.72.2.3.2.72.2 | Scalarpmora14AlmLowSBand | read-only | current | Low S Band :This OID indicates that the input power over the S-Band is too low <Help> This alarm indicates that the input power over the S-Band is too low <Con… |
| 1.3.6.1.4.1.20044.72.2.3.2.72.3 | Scalarpmora14AlmCBandLossOfSignal | read-only | current | C Band Loss Of Signal :This OID indicates that a Loss of Signal is detected over the C-Band <Help> This alarm indicates that a Loss of Signal is detected over … |
| 1.3.6.1.4.1.20044.72.2.3.2.72.4 | Scalarpmora14AlmHighBackReflection | read-only | current | High Back Reflection :This OID indicates that a High Back Reflection ratio is too high <Help> This alarm indicates that a High Back Reflection ratio is too hig… |
| 1.3.6.1.4.1.20044.72.2.3.2.72.5 | Scalarpmora14AlmLineConnectorUnlocked | read-only | current | Line Connector Unlocked :This OID indicates the Fonrt panel Line connector is not locked <Help> This alarm indicates the Fonrt panel Line connector is not lock… |
| 1.3.6.1.4.1.20044.72.2.3.2.72.6 | Scalarpmora14AlmOscFailed | read-only | current | Osc Failed :This OID indicates that an OSC Loss of Frame is reported by the linked HCS amplifier <Help> This alarm indicates that an OSC Loss of Frame is repor… |
| 1.3.6.1.4.1.20044.72.2.3.2.72.7 | Scalarpmora14AlmPartialAprSecurity | read-only | current | Partial APR Security :This OID indicates at least one APR security switch has been disabled <Help> This alarm indicates at least one APR security switch has be… |
| 1.3.6.1.4.1.20044.72.2.3.2.72.8 | Scalarpmora14AlmStartupLowSBand | read-only | current | Startup Low S Band :This OID indicates that the input power over the S-Band is too low on startup <Help> This alarm indicates that the input power over the S-B… |
| 1.3.6.1.4.1.20044.72.2.3.2.72.9 | Scalarpmora14AlmStartupHighBackReflection | read-only | current | Startup High Back Reflection :This OID indicates that a High Back Reflection ratio is too high on startup <Help> This alarm indicates that a High Back Reflecti… |
| 1.3.6.1.4.1.20044.72.2.3.3 | Nodepmora14AlmLineCrit | |||
| 1.3.6.1.4.1.20044.72.2.3.3.35 | Nodepmora14Almpump1Alarms | |||
| 1.3.6.1.4.1.20044.72.2.3.3.35.1 | Scalarpmora14AlmPump1Shutdown | read-only | current | Pump 1 Laser Shutdown :This OID indicates that the pump 1 is shutdown <Help> This status indicates if the pump1 is shutdown <Condtype> PUMP1_SHUTDOWN <Probcaus… |
| 1.3.6.1.4.1.20044.72.2.3.3.35.2 | Scalarpmora14AlmPump1TecFail | read-only | current | Pump 1 TEC Fail :This OID indicates that the TEC is in fail condition on pump 1 <Help> This alarm indicates if the TEC of the pump1 is in fail condition <Condt… |
| 1.3.6.1.4.1.20044.72.2.3.3.36 | Nodepmora14Almpump2Alarms | |||
| 1.3.6.1.4.1.20044.72.2.3.3.36.1 | Scalarpmora14AlmPump2Shutdown | read-only | current | Pump 2 Laser Shutdown :This OID indicates that the pump 2 is shutdown <Help> This status indicates if the pump2 is shutdown <Condtype> PUMP2_SHUTDOWN <Probcaus… |
| 1.3.6.1.4.1.20044.72.2.3.3.36.2 | Scalarpmora14AlmPump2TecFail | read-only | current | Pump 2 TEC Fail :This OID indicates that the TEC is in fail condition on pump 2 <Help> This alarm indicates if the TEC of the pump2 is in fail condition <Condt… |
| 1.3.6.1.4.1.20044.72.3 | Nodepmora14measures | |||
| 1.3.6.1.4.1.20044.72.3.1 | Nodepmora14MesrOther | |||
| 1.3.6.1.4.1.20044.72.3.1.80 | Scalarpmora14MesrpmTempMeas | read-only | current | Module Temperature :This OID gives the temperature of the PM (Temperature =AV/256) (Unit = C)<Help> This measure gives the temperature of the module |
| 1.3.6.1.4.1.20044.72.3.2 | Nodepmora14MesrClient | |||
| 1.3.6.1.4.1.20044.72.3.3 | Nodepmora14MesrLine | |||
| 1.3.6.1.4.1.20044.72.3.3.64 | Scalarpmora14Mesrpump1CurrentMeas | read-only | current | Pump 1 Laser Current :This OID gives the Pump1 laser current (Current =AV/10) (Unit = mA) <Help> This measure gives the Pump1 Laser current |
| 1.3.6.1.4.1.20044.72.3.3.65 | Scalarpmora14Mesrpump1PowerMeas | read-only | current | Pump 1 Tx Power :This OID gives the Pump1 power value (Power =AV/20) (Unit = mW) <Help> This measure gives the Pump1 Power value |
| 1.3.6.1.4.1.20044.72.3.3.66 | Scalarpmora14Mesrpump1TempMeas | read-only | current | Pump 1 Temperature :This OID gives the Pump1 TEC temperature (Temperature =AV/256) (Unit = C)<Help> This measure gives the Pump1 TEC temperature |
| 1.3.6.1.4.1.20044.72.3.3.67 | Scalarpmora14Mesrpump1TecCurrentMeas | read-only | current | Pump 1 TEC Current :This OID gives the Pump1 TEC current (Current =AV/10) (Unit = mA) <Help> This measure gives the Pump1 TEC current |
| 1.3.6.1.4.1.20044.72.3.3.68 | Scalarpmora14Mesrpump2CurrentMeas | read-only | current | Pump 2 Laser Current :This OID gives the Pump2 laser current (Current =AV/10) (Unit = mA) <Help> This measure gives the Pump2 Laser current |
| 1.3.6.1.4.1.20044.72.3.3.69 | Scalarpmora14Mesrpump2PowerMeas | read-only | current | Pump 2 Tx Power :This OID gives the Pump2 power value (Power =AV/20) (Unit = mW) <Help> This measure gives the Pump2 Power value |
| 1.3.6.1.4.1.20044.72.3.3.70 | Scalarpmora14Mesrpump2TempMeas | read-only | current | Pump 2 Temperature :This OID gives the Pump2 TEC temperature (Temperature =AV/256) (Unit = C) <Help> This measure gives the Pump2 TEC temperature |
| 1.3.6.1.4.1.20044.72.3.3.71 | Scalarpmora14Mesrpump2TecCurrentMeas | read-only | current | Pump 2 TEC Current :This OID gives the Pump2 TEC current (Current =AV/10) (Unit = mA) <Help> This measure gives the Pump2 TEC current |
| 1.3.6.1.4.1.20044.72.3.3.72 | Scalarpmora14MesrtotalPumpsPower | read-only | current | Total Pumps Power :This OID indicates the total pumps power (Power = AV/20) (Unit = mW) <Help> This measure indicates the total pump power |
| 1.3.6.1.4.1.20044.72.3.3.73 | Scalarpmora14MesrinputCBandPower | read-only | current | Input C Band Power :This OID indicates the input power over the C-Band (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indicates the input power ove… |
| 1.3.6.1.4.1.20044.72.3.3.74 | Scalarpmora14MesrsBandPower | read-only | current | S Band Power :This OID indicates the input power over the S-band (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indicates the input power over the … |
| 1.3.6.1.4.1.20044.72.3.3.75 | Scalarpmora14MesrbackReflectionPumpPower | read-only | current | Back Reflection Pump Power :This OID indicates the Back Reflection Pump power (Power =(AV-32768)*0,005) (Unit = dBm) <Help> This measure indicates the Back Ref… |
| 1.3.6.1.4.1.20044.72.3.3.76 | Scalarpmora14MesrbackReflectionPumpRatio | read-only | current | Back Reflection Pump Ratio :This OID indicates the Back Relfection Pump ration (Power =(AV-32768)*0,005) (Unit = dB) <Help> This measure indicates the Back Ref… |
| 1.3.6.1.4.1.20044.72.4 | Nodepmora14counters | |||
| 1.3.6.1.4.1.20044.72.4.1 | Nodepmora14CntOther | |||
| 1.3.6.1.4.1.20044.72.4.2 | Nodepmora14CntClient | |||
| 1.3.6.1.4.1.20044.72.4.3 | Nodepmora14CntLine | |||
| 1.3.6.1.4.1.20044.72.4.259 | Scalarpmora14CntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.72.4.260 | Scalarpmora14CntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.72.6 | Nodepmora14controlsWrite | |||
| 1.3.6.1.4.1.20044.72.6.1 | Nodepmora14CtrlOther | |||
| 1.3.6.1.4.1.20044.72.6.1.0 | Nodepmora14Ctrlsynth0 | |||
| 1.3.6.1.4.1.20044.72.6.1.0.1 | Scalarpmora14CtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.72.6.1.0.9 | Scalarpmora14CtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.72.6.1.0.13 | Scalarpmora14CtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.72.6.1.5 | Nodepmora14CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.72.6.1.5.2 | Scalarpmora14CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.72.6.1.5.3 | Scalarpmora14CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.72.6.1.16 | Scalarpmora14CtrlaprMode | read-write | current | APR Mode :This OID selects the APR Mode <Help> This control initiates the APR Mode |
| 1.3.6.1.4.1.20044.72.6.1.73 | Nodepmora14CtrlledTest | |||
| 1.3.6.1.4.1.20044.72.6.1.73.1 | Scalarpmora14CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.72.6.1.73.2 | Scalarpmora14CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.72.6.1.73.3 | Scalarpmora14CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.72.6.1.74 | Nodepmora14CtrlmaintMode | |||
| 1.3.6.1.4.1.20044.72.6.1.74.1 | Scalarpmora14CtrlMaintenance | read-write | current | PM Maintenance Mode :This OID sets the PM in maintenance mode <Help> This control enables the maintenance mode of the module |
| 1.3.6.1.4.1.20044.72.6.2 | Nodepmora14CtrlClient | |||
| 1.3.6.1.4.1.20044.72.6.3 | Nodepmora14CtrlLine | |||
| 1.3.6.1.4.1.20044.72.6.3.75 | Nodepmora14CtrlaprManualRestart | |||
| 1.3.6.1.4.1.20044.72.6.3.75.1 | Scalarpmora14CtrlAprManualRestart | read-write | current | APR Manual Restart :This OID initiates the Restart mechanism to retrieve from the APR state.<Help> This control initiates the Restart mechanism to retrieve fro… |
| 1.3.6.1.4.1.20044.72.7 | Nodepmora14ri | |||
| 1.3.6.1.4.1.20044.72.7.1 | Nodepmora14riTable | |||
| 1.3.6.1.4.1.20044.72.7.1.2 | Tablepmora14RinvLineTable | not-accessible | current | List of the Lines on the selected module |
| 1.3.6.1.4.1.20044.72.7.1.2.1 | Rowpmora14RinvLineEntry | not-accessible | current | Row definition for the Line table |
| 1.3.6.1.4.1.20044.72.7.1.2.1.1 | Columnpmora14RinvLineIndex | read-only | current | Index for Line table |
| 1.3.6.1.4.1.20044.72.7.1.2.1.2 | Columnpmora14RinvportLine | read-only | current | Inventory for the Line: This OID contains the inventory for the Line |
| 1.3.6.1.4.1.20044.72.7.2 | Scalarpmora14RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.72.7.3 | Scalarpmora14RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.72.7.4 | Scalarpmora14RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.72.7.5 | Scalarpmora14RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.72.7.6 | Scalarpmora14RinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the gateware platform. |
| 1.3.6.1.4.1.20044.72.9 | Nodepmora14Config | |||
| 1.3.6.1.4.1.20044.72.9.1 | Nodepmora14CfgNoValue | |||
| 1.3.6.1.4.1.20044.72.9.1.1 | Nodepmora14tablelineStartup | |||
| 1.3.6.1.4.1.20044.72.9.1.1.2 | Scalarpmora14CfgoraModuleCtrl | read-write | current | Default Settings on the module :This OID configures the default initialisation settings of the Raman module |
| 1.3.6.1.4.1.20044.72.9.1.1.3 | Scalarpmora14CfgautoRestartDelay | read-write | current | Default Settings on autorestart delay :This OID configures the default period on the autorestart |
| 1.3.6.1.4.1.20044.72.9.1.1.4 | Scalarpmora14CfgramanGain | read-write | current | Default Settings on the Raman Gain :This OID configures the default gain on the Raman module |
| 1.3.6.1.4.1.20044.72.9.1.1.5 | Scalarpmora14CfgramanMode | read-write | current | Default Settings on Raman mode :This OID configures the default Raman mode |
| 1.3.6.1.4.1.20044.72.9.1.1.6 | Scalarpmora14CfgtiltValue | read-write | current | Default Settings on the tilt value :This OID configures the default tilt on the line amplifier. |
| 1.3.6.1.4.1.20044.72.9.1.1.7 | Scalarpmora14CfghighBackreflectionThreshold | read-write | current | Default Settings on the backreflection threshold :This OID configures the default threshold on the backreflection |
| 1.3.6.1.4.1.20044.72.9.1.1.8 | Scalarpmora14CfgsBandThreshold | read-write | current | Default Settings on the S band threshold :This OID configures the default threshold on the S band |
| 1.3.6.1.4.1.20044.72.9.1.1.9 | Scalarpmora14Cfgpump1ManualPower | read-write | current | Default Settings on the pump power :This OID configures the default value on the power |
| 1.3.6.1.4.1.20044.72.9.1.1.10 | Scalarpmora14Cfgpump2ManualPower | read-write | current | Default Settings on the pump power :This OID configures the default value on the power |
| 1.3.6.1.4.1.20044.72.9.2 | Nodepmora14CfgLabels | |||
| 1.3.6.1.4.1.20044.72.9.2.1 | Tablepmora14CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.72.9.2.1.1 | Rowpmora14CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.72.9.2.1.1.1 | Columnpmora14CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.72.9.2.1.1.3 | Columnpmora14CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.72.9.2.2 | Tablepmora14CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.72.9.2.2.1 | Rowpmora14CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.72.9.2.2.1.1 | Columnpmora14CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.72.9.2.2.1.3 | Columnpmora14CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.72.9.257 | Scalarpmora14CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.72.10 | Nodepmora14traps | |||
| 1.3.6.1.4.1.20044.72.10.4 | Scalarpmora14trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.72.10.34 | Notificationpmora14LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.72.10.35 | Notificationpmora14LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.72.10.50 | Notificationpmora14PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.72.10.51 | Notificationpmora14PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pmora14AprMode | INTEGER { ora14aproffmode(0), ora14aproscmode(1), ora14aprbrratiomode(2) ora14aprsbandmode(3) ora14aprfullmode(4) } | current | Different modes on APR |
| Pmora14LineFiberTypeMode | INTEGER { ora14g652mode(0), ora14g655leafmode(1), ora14g655truewavemode(2) ora14g654mode(3) ora14g653mode(4) } | current | Different modes on APR |
| Pmora14PumpsMode | INTEGER { ora14maxpowermode(0), ora14gaincontrolmode(1), ora14manualcontrolmode(2) } | current | Different modes on the Raman Module |