EKINOPS-PmroadmC-MIB
143 objects
MIB for the Ekinops PmroadmC hardware.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.35 | IdentitymodulepmroadmC | MIB for the Ekinops PmroadmC hardware. | ||
| 1.3.6.1.4.1.20044.35.2 | NodepmroadmCalarms | |||
| 1.3.6.1.4.1.20044.35.2.1 | NodepmroadmCAlmOther | |||
| 1.3.6.1.4.1.20044.35.2.1.1 | NodepmroadmCAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.35.2.1.1.17 | NodepmroadmCAlmswitchDegrade | |||
| 1.3.6.1.4.1.20044.35.2.1.1.17.2 | ScalarpmroadmCAlmSwitchTempHighDeg | read-only | current | WSS Temperature High Warning :Warning indicating that the temperature of the Switch in the ROADM is higher than the warning threshold value. <Help> This Warnin… |
| 1.3.6.1.4.1.20044.35.2.1.2 | NodepmroadmCAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.35.2.1.2.16 | NodepmroadmCAlmswitchAlarms | |||
| 1.3.6.1.4.1.20044.35.2.1.2.16.2 | ScalarpmroadmCAlmSwitchTempHighAla | read-only | current | WSS Temperature High Alarm :Alarm indicating that the temperature of the Switch in the ROADM is higher than the alarm threshold value <Help> This Alarm indicat… |
| 1.3.6.1.4.1.20044.35.2.1.2.66 | NodepmroadmCAlmmoduleStatus | |||
| 1.3.6.1.4.1.20044.35.2.1.2.66.1 | ScalarpmroadmCAlmColdReset | read-only | current | Previous Cold Reset : <Help> This status indicates that the previous reset was a Cold Reset. <Condtype> COLD_RESET <Probcause> other (1) <Alarmtype> other (1) … |
| 1.3.6.1.4.1.20044.35.2.1.2.66.2 | ScalarpmroadmCAlmWarmReset | read-only | current | Previous Warm Reset : <Help> This status indicates that the previous reset was a Warm Reset. <Condtype> WARM_RESET <Probcause> other (1) <Alarmtype> other (1) … |
| 1.3.6.1.4.1.20044.35.2.1.2.66.3 | ScalarpmroadmCAlmHotReset | read-only | current | Previous Hot Reset : <Help> This status indicates that the previous reset was a Hot Reset. <Condtype> HOT_RESET <Probcause> other (1) <Alarmtype> other (1) <Po… |
| 1.3.6.1.4.1.20044.35.2.1.2.66.5 | ScalarpmroadmCAlmSwitchNotReady | read-only | current | WSS Not Ready :This OID indicates the switch is not operational. <Help> This status indicates if the Switch of the ROADM has been correctly initialized <Condty… |
| 1.3.6.1.4.1.20044.35.2.1.2.67 | NodepmroadmCAlmmoduleAlarms | |||
| 1.3.6.1.4.1.20044.35.2.1.2.67.2 | ScalarpmroadmCAlmModuleTempHighAla | read-only | current | Module Temperature High Alarm :Alarm indicating that the temperature of the module is higher than the alarm threshold value <Help> This Alarm indicates if the … |
| 1.3.6.1.4.1.20044.35.2.1.2.67.4 | ScalarpmroadmCAlmCaseTempHighAla | read-only | current | Case Temperature High Alarm :Alarm indicating that the temperature of the case is higher than the alarm threshold value <Help> This Alarm indicates if the temp… |
| 1.3.6.1.4.1.20044.35.2.1.2.68 | NodepmroadmCAlmmoduleDegrad | |||
| 1.3.6.1.4.1.20044.35.2.1.2.68.2 | ScalarpmroadmCAlmModuleTempHighDeg | read-only | current | Module Temperature High Warning :Alarm indicating that the temperature of the module is higher than the warning threshold value <Help> This Warning indicates i… |
| 1.3.6.1.4.1.20044.35.2.1.2.68.4 | ScalarpmroadmCAlmCaseTempHighDeg | read-only | current | Case Temperature High Warning :Alarm indicating that the temperature of the case is higher than the warning threshold value <Help> This Warning indicates if th… |
| 1.3.6.1.4.1.20044.35.2.1.3 | NodepmroadmCAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.35.2.1.3.0 | NodepmroadmCAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.35.2.1.3.0.1 | ScalarpmroadmCAlmInServiceNotReady | read-only | current | Building Waveplan :This OID is a status indicating that the switch is currently setting a new waveplan (used plan) <Help> This status indicates that the ROADM … |
| 1.3.6.1.4.1.20044.35.2.1.3.0.9 | ScalarpmroadmCAlmModuleGlobFailure | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MODULE_GLOB_FAILURE <Probcause> equipmentMalfunction (16) <Alarmty… |
| 1.3.6.1.4.1.20044.35.2.1.3.0.15 | ScalarpmroadmCAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.35.2.1.3.0.16 | ScalarpmroadmCAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.35.2.1.3.7 | NodepmroadmCAlmsynthAlm7 | |||
| 1.3.6.1.4.1.20044.35.2.1.3.7.2 | ScalarpmroadmCAlmInitNotCompl | read-only | current | WSS Not Ready :This OID indicates the switch is not operational. <Help> This status indicates if the switch has been correctly initialized <Condtype> INIT_NOT_… |
| 1.3.6.1.4.1.20044.35.2.1.3.7.9 | ScalarpmroadmCAlmSwitchDegrade | read-only | current | Warning On WSS :This OID indicates a warning is present coming out of the switch <Help> This alarm indicates if a warning has been detected on the switch <Cond… |
| 1.3.6.1.4.1.20044.35.2.1.3.7.10 | ScalarpmroadmCAlmSwitchAlm | read-only | current | Alarm On WSS :This OID indicates an alarm is present coming out of the switch <Help> This alarm indicates if an Alarm has been detected on the switch <Condtype… |
| 1.3.6.1.4.1.20044.35.3 | NodepmroadmCmeasures | |||
| 1.3.6.1.4.1.20044.35.3.1 | NodepmroadmCMesrOther | |||
| 1.3.6.1.4.1.20044.35.3.1.16 | ScalarpmroadmCMesrswitchTemp | read-only | current | WSS Temperature :This OID gives the temperature value of the switch in the ROADM (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature va… |
| 1.3.6.1.4.1.20044.35.3.1.64 | ScalarpmroadmCMesrmoduleTemp | read-only | current | Module Temperature :This OID gives the temperature value of the ROADM (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature value of the … |
| 1.3.6.1.4.1.20044.35.3.1.65 | ScalarpmroadmCMesrcaseTemp | read-only | current | Case Temperature :This OID gives the temperature value of the case of the ROADM (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature val… |
| 1.3.6.1.4.1.20044.35.6 | NodepmroadmCcontrolsWrite | |||
| 1.3.6.1.4.1.20044.35.6.1 | NodepmroadmCCtrlOther | |||
| 1.3.6.1.4.1.20044.35.6.1.0 | NodepmroadmCCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.35.6.1.0.1 | ScalarpmroadmCCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.35.6.1.0.9 | ScalarpmroadmCCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.35.6.1.0.13 | ScalarpmroadmCCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.35.6.1.4 | NodepmroadmCCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.35.6.1.4.1 | ScalarpmroadmCCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM |
| 1.3.6.1.4.1.20044.35.6.1.4.2 | ScalarpmroadmCCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM |
| 1.3.6.1.4.1.20044.35.6.1.5 | NodepmroadmCCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.35.6.1.5.2 | ScalarpmroadmCCtrlColdReset | read-write | current | Software Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on… |
| 1.3.6.1.4.1.20044.35.6.1.5.3 | ScalarpmroadmCCtrlWarmReset | read-write | current | Software Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remain… |
| 1.3.6.1.4.1.20044.35.6.1.16 | NodepmroadmCCtrlswitchCtrl | |||
| 1.3.6.1.4.1.20044.35.6.1.16.1 | ScalarpmroadmCCtrlAllChannelsHighLoss | read-write | current | Express Ports Shutdown :This OID , when set, puts all the waves on a high attenuation mode. <Help> This control sets the waves on a high attenuation mode |
| 1.3.6.1.4.1.20044.35.6.1.17 | ScalarpmroadmCCtrlcraftSynch | read-write | current | Craft Synchro :This OID is used for internal purpose only |
| 1.3.6.1.4.1.20044.35.6.1.64 | NodepmroadmCCtrlledTest | |||
| 1.3.6.1.4.1.20044.35.6.1.64.1 | ScalarpmroadmCCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.35.6.1.64.2 | ScalarpmroadmCCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.35.6.1.64.3 | ScalarpmroadmCCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.35.6.1.65 | TablepmroadmCCtrlwavePlanAssignmentsRefreshTable | not-accessible | current | List of pmroadmCCtrlwavePlanAssignmentsRefresh Article |
| 1.3.6.1.4.1.20044.35.6.1.65.1 | RowpmroadmCCtrlwavePlanAssignmentsRefreshEntry | not-accessible | current | Row definition for the pmroadmCCtrlwavePlanAssignmentsRefresh table |
| 1.3.6.1.4.1.20044.35.6.1.65.1.1 | ColumnpmroadmCCtrlwavePlanAssignmentsRefreshIndex | read-only | current | Index definition for the pmroadmCCtrlwavePlanAssignmentsRefresh table |
| 1.3.6.1.4.1.20044.35.6.1.65.1.2 | ColumnpmroadmCCtrlWaveStatusRefreshPortn | read-only | current | WaveStatus :This OID sets the waves status to ON or OFF inside the waveplan. |
| 1.3.6.1.4.1.20044.35.6.1.65.1.3 | ColumnpmroadmCCtrlWaveNarrowingRefreshPortn | read-only | current | WaveNarrowing :This OID sets the wave narrowing value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.65.1.4 | ColumnpmroadmCCtrlWaveCenterFrequencyRefreshPortn | read-only | current | WaveCenterFrequency :This OID sets the wave center frequency value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.65.1.5 | ColumnpmroadmCCtrlWaveOOSRefreshPortn | read-only | current | WaveOOS :This OID sets the wave Out Of Service value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.65.1.6 | ColumnpmroadmCCtrlWaveAttenuationRefreshPortn | read-only | current | WaveAttenuation :This OID sets the wave attenuation value inside the waveplan. |
| 1.3.6.1.4.1.20044.35.6.1.65.1.7 | ColumnpmroadmCCtrlWaveItuRefreshPortn | read-only | current | WaveItu :This OID sets the wave channel number inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.65.1.8 | ColumnpmroadmCCtrlWaveDegreeRefreshPortn | read-only | current | WaveDegree :This OID sets the degree assigned to the wave inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.65.1.16 | ColumnpmroadmCCtrlUsageRefreshPortn | read-only | current | Wave Assignment :This OID gives the assignment of a wave for a given waveplan along with the full possible waveplan. |
| 1.3.6.1.4.1.20044.35.6.1.66 | TablepmroadmCCtrlwavePlanAssignmentsWorkTable | not-accessible | current | List of pmroadmCCtrlwavePlanAssignmentsWork Article |
| 1.3.6.1.4.1.20044.35.6.1.66.1 | RowpmroadmCCtrlwavePlanAssignmentsWorkEntry | not-accessible | current | Row definition for the pmroadmCCtrlwavePlanAssignmentsWork table |
| 1.3.6.1.4.1.20044.35.6.1.66.1.1 | ColumnpmroadmCCtrlwavePlanAssignmentsWorkIndex | read-only | current | Index definition for the pmroadmCCtrlwavePlanAssignmentsWork table |
| 1.3.6.1.4.1.20044.35.6.1.66.1.2 | ColumnpmroadmCCtrlWaveStatusWorkPortn | read-write | current | WaveStatus :This OID sets the waves status to ON or OFF inside the waveplan. |
| 1.3.6.1.4.1.20044.35.6.1.66.1.3 | ColumnpmroadmCCtrlWaveNarrowingWorkPortn | read-write | current | WaveNarrowing :This OID sets the wave narrowing value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.66.1.4 | ColumnpmroadmCCtrlWaveCenterFrequencyWorkPortn | read-write | current | WaveCenterFrequency :This OID sets the wave center frequency value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.66.1.5 | ColumnpmroadmCCtrlWaveOOSWorkPortn | read-write | current | WaveOOS :This OID sets the wave Out Of Service value inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.66.1.6 | ColumnpmroadmCCtrlWaveAttenuationWorkPortn | read-write | current | WaveAttenuation :This OID sets the wave attenuation value inside the waveplan. |
| 1.3.6.1.4.1.20044.35.6.1.66.1.7 | ColumnpmroadmCCtrlWaveItuWorkPortn | read-only | current | WaveItu :This OID sets the wave channel number inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.66.1.8 | ColumnpmroadmCCtrlWaveDegreeWorkPortn | read-write | current | WaveDegree :This OID sets the degree assigned to the wave inside the waveplan (Not Used) |
| 1.3.6.1.4.1.20044.35.6.1.66.1.16 | ColumnpmroadmCCtrlUsageWorkPortn | read-only | current | Wave Assignment :This OID gives the assignment of a wave for a given waveplan along with the full possible waveplan. |
| 1.3.6.1.4.1.20044.35.6.1.67 | ScalarpmroadmCCtrlbuildFromMgntPlan | read-write | current | Build From MGNT :This OID builds a waveplan from the waveplans stored in the MGNT board. <Help> This control builds a waveplan from the waveplans stored in the… |
| 1.3.6.1.4.1.20044.35.6.1.68 | ScalarpmroadmCCtrlloadToWorkplan | read-write | current | Display Waveplan :This OID displays in the user interface one of the following waveplan : In service Waveplan, Saved Waveplan 1, Saved Waveplan 2, Build from M… |
| 1.3.6.1.4.1.20044.35.6.1.69 | ScalarpmroadmCCtrlsaveWorkPlanTo | read-write | current | Save Waveplan : This OID saves (in the Saved Waveplan 1 or Saved Waveplan 2) the waveplan built with the user interface. <Help> This control saves (in the Save… |
| 1.3.6.1.4.1.20044.35.6.1.70 | ScalarpmroadmCCtrlloadPlanToUse | read-write | current | Set Waveplan In Service : This OID sets on the following waveplan In Service (Saved Waveplan 1, Saved Waveplan 2 or Displayed Waveplan). <Help> This control se… |
| 1.3.6.1.4.1.20044.35.6.1.71 | ScalarpmroadmCCtrlrefreshWithPlan | read-write | current | Refresh User Interface :This OID refreshes the user interface with the information coming from the In service Waveplan, the Saved Waveplan 1 or the Saved Wavep… |
| 1.3.6.1.4.1.20044.35.6.1.72 | ScalarpmroadmCCtrlsavePlanToFile | read-write | current | Export To File On MGNT :This OID exports the Displayed Waveplan to a file on the MGNT board. <Help> This control the Displayed waveplan to a file on the MGNT b… |
| 1.3.6.1.4.1.20044.35.6.1.73 | ScalarpmroadmCCtrlloadPlanFromFile | read-write | current | Import From File On MGNT :This OID imports a waveplan from a file on the MGNT board to the Displayed Waveplan. <Help> This control imports a waveplan from a fi… |
| 1.3.6.1.4.1.20044.35.6.2 | NodepmroadmCCtrlExpress | |||
| 1.3.6.1.4.1.20044.35.6.2.19 | TablepmroadmCCtrlexpTxCommonAttDegTable | not-accessible | current | List of pmroadmCCtrlexpTxCommonAttDeg Article |
| 1.3.6.1.4.1.20044.35.6.2.19.1 | RowpmroadmCCtrlexpTxCommonAttDegEntry | not-accessible | current | Row definition for the pmroadmCCtrlexpTxCommonAttDeg table |
| 1.3.6.1.4.1.20044.35.6.2.19.1.1 | ColumnpmroadmCCtrlexpTxCommonAttDegIndex | read-only | current | Index definition for the pmroadmCCtrlexpTxCommonAttDeg table |
| 1.3.6.1.4.1.20044.35.6.2.19.1.2 | ColumnpmroadmCCtrlexpTxCommonAttDegPortn | read-write | current | Express Output Attenuation :This OID defines the line output attenuation. <Help> This OID defines the line output attenuation |
| 1.3.6.1.4.1.20044.35.6.2.43 | TablepmroadmCCtrlexpRxCommonAttDegTable | not-accessible | current | List of pmroadmCCtrlexpRxCommonAttDeg Article |
| 1.3.6.1.4.1.20044.35.6.2.43.1 | RowpmroadmCCtrlexpRxCommonAttDegEntry | not-accessible | current | Row definition for the pmroadmCCtrlexpRxCommonAttDeg table |
| 1.3.6.1.4.1.20044.35.6.2.43.1.1 | ColumnpmroadmCCtrlexpRxCommonAttDegIndex | read-only | current | Index definition for the pmroadmCCtrlexpRxCommonAttDeg table |
| 1.3.6.1.4.1.20044.35.6.2.43.1.2 | ColumnpmroadmCCtrlexpRxCommonAttDegPortn | read-write | current | Express Input Attenuation :This OID defines the line input attenuation. (Unit = dB) <Help> This OID defines the line input attenuation |
| 1.3.6.1.4.1.20044.35.6.2.44 | NodepmroadmCCtrlapplyPlanUpdate | |||
| 1.3.6.1.4.1.20044.35.6.2.44.1 | ScalarpmroadmCCtrlApply | read-write | current | Apply Update :This OID confirms the parameters selected for the waveplan modification |
| 1.3.6.1.4.1.20044.35.6.3 | NodepmroadmCCtrlLine | |||
| 1.3.6.1.4.1.20044.35.7 | NodepmroadmCri | |||
| 1.3.6.1.4.1.20044.35.7.1 | NodepmroadmCriTable | |||
| 1.3.6.1.4.1.20044.35.7.1.1 | TablepmroadmCRinvPortTable | not-accessible | current | List of the Ports on the selected module |
| 1.3.6.1.4.1.20044.35.7.1.1.1 | RowpmroadmCRinvPortEntry | not-accessible | current | Row definition for the Port table |
| 1.3.6.1.4.1.20044.35.7.1.1.1.1 | ColumnpmroadmCRinvPortIndex | read-only | current | Index for Port table |
| 1.3.6.1.4.1.20044.35.7.1.1.1.2 | ColumnpmroadmCRinvPort | read-only | current | Inventory for the Port: This OID contains the inventory for the Port |
| 1.3.6.1.4.1.20044.35.7.1.2 | TablepmroadmCRinvLineTable | not-accessible | current | List of the Lines on the selected module |
| 1.3.6.1.4.1.20044.35.7.1.2.1 | RowpmroadmCRinvLineEntry | not-accessible | current | Row definition for the Line table |
| 1.3.6.1.4.1.20044.35.7.1.2.1.1 | ColumnpmroadmCRinvLineIndex | read-only | current | Index for Line table |
| 1.3.6.1.4.1.20044.35.7.1.2.1.2 | ColumnpmroadmCRinvxfpLine | read-only | current | Inventory for the Line: This OID contains the inventory for the Line |
| 1.3.6.1.4.1.20044.35.7.2 | ScalarpmroadmCRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.35.7.4 | ScalarpmroadmCRinvHwPlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.35.7.5 | ScalarpmroadmCRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.35.9 | NodepmroadmCConfig | |||
| 1.3.6.1.4.1.20044.35.9.1 | NodepmroadmCCfgLsd | |||
| 1.3.6.1.4.1.20044.35.9.1.1 | NodepmroadmCtableclientLsd | |||
| 1.3.6.1.4.1.20044.35.9.2 | NodepmroadmCCfgStartup | |||
| 1.3.6.1.4.1.20044.35.9.2.1 | TablepmroadmCCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.35.9.2.1.1 | RowpmroadmCCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.35.9.2.1.1.1 | ColumnpmroadmCCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.35.9.2.1.1.3 | ColumnpmroadmCCfgLineaRxCommonAttDegPortn | read-write | current | Defaut setting on attenuation on Rx Express :This register selects the Rx attenuator value of the Express line on setup |
| 1.3.6.1.4.1.20044.35.9.2.2 | NodepmroadmCtablelineStartup | |||
| 1.3.6.1.4.1.20044.35.9.2.3 | NodepmroadmCtableclientsRoadm | |||
| 1.3.6.1.4.1.20044.35.9.2.4 | NodepmroadmCtablelinesRoadm | |||
| 1.3.6.1.4.1.20044.35.9.2.4.2 | ScalarpmroadmCCfgexpGridCurrent | read-write | current | Default setting of the grid :This register selects the configuration of the grid used on setup |
| 1.3.6.1.4.1.20044.35.9.2.5 | NodepmroadmCtableother | |||
| 1.3.6.1.4.1.20044.35.9.2.5.2 | ScalarpmroadmCCfgcomponentType | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.35.9.2.5.3 | ScalarpmroadmCCfgmiscellaneous | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.35.9.2.5.4 | ScalarpmroadmCCfgfirstChannel | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.35.9.2.5.5 | ScalarpmroadmCCfglastChannel | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.35.9.2.5.6 | ScalarpmroadmCCfggrid | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.35.9.3 | NodepmroadmCCfgLabels | |||
| 1.3.6.1.4.1.20044.35.9.3.1 | TablepmroadmCCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.35.9.3.1.1 | RowpmroadmCCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.35.9.3.1.1.1 | ColumnpmroadmCCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.35.9.3.1.1.3 | ColumnpmroadmCCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.35.9.3.2 | TablepmroadmCCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.35.9.3.2.1 | RowpmroadmCCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.35.9.3.2.1.1 | ColumnpmroadmCCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.35.9.3.2.1.3 | ColumnpmroadmCCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.35.9.257 | ScalarpmroadmCCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.35.10 | NodepmroadmCtraps | |||
| 1.3.6.1.4.1.20044.35.10.4 | ScalarpmroadmCtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.35.10.50 | NotificationpmroadmCPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.35.10.51 | NotificationpmroadmCPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PmroadmCChannel | INTEGER { } | current | Channel selection on line ports |
| PmroadmCGrid | INTEGER { roadmCgrid200(200), roadmCgrid100(100), roadmCgrid50(50) } | current | Different grids on line ports |
| PmroadmCPlanNumber | INTEGER { workingPlan(0), savedPlan1(1), savedPlan2(2), usedPlan(7) } | current | Different values for plans |