EKINOPS-Pmvoa-MIB
142 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.84 | IdentitymodulePmvoa | Creation. | ||
| 1.3.6.1.4.1.20044.84.2 | Nodepmvoaalarms | |||
| 1.3.6.1.4.1.20044.84.2.1 | NodepmvoaAlmOther | |||
| 1.3.6.1.4.1.20044.84.2.1.1 | NodepmvoaAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.84.2.1.1.2 | NodepmvoaAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.84.2.1.1.2.1 | ScalarpmvoaAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.84.2.1.1.2.2 | ScalarpmvoaAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.84.2.1.1.2.3 | ScalarpmvoaAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.84.2.1.1.2.4 | ScalarpmvoaAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.84.2.1.2 | NodepmvoaAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.84.2.1.3 | NodepmvoaAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.84.2.1.3.0 | NodepmvoaAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.84.2.1.3.0.9 | ScalarpmvoaAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.84.2.1.3.0.15 | ScalarpmvoaAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.84.2.1.3.0.16 | ScalarpmvoaAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.84.2.2 | NodepmvoaAlmClient | |||
| 1.3.6.1.4.1.20044.84.2.2.1 | NodepmvoaAlmClientNurg | |||
| 1.3.6.1.4.1.20044.84.2.2.2 | NodepmvoaAlmClientUrg | |||
| 1.3.6.1.4.1.20044.84.2.2.3 | NodepmvoaAlmClientCrit | |||
| 1.3.6.1.4.1.20044.84.2.3 | NodepmvoaAlmLine | |||
| 1.3.6.1.4.1.20044.84.2.3.1 | NodepmvoaAlmLineNurg | |||
| 1.3.6.1.4.1.20044.84.2.3.2 | NodepmvoaAlmLineUrg | |||
| 1.3.6.1.4.1.20044.84.2.3.3 | NodepmvoaAlmLineCrit | |||
| 1.3.6.1.4.1.20044.84.2.3.3.24 | TablepmvoaAlmsynthAlmLineTable | not-accessible | current | List of pmvoaAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.84.2.3.3.24.1 | RowpmvoaAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pmvoaAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.84.2.3.3.24.1.1 | ColumnpmvoaAlmsynthAlmLineIndex | read-only | current | Index definition for the pmvoaAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.84.2.3.3.24.1.2 | ColumnpmvoaAlmLineSfpVoaAbsentPortn | read-only | current | VOA Module Absent :This OID indicates that the VOA SFP is not present. <Help> This alarm indicates if the VOA SFP is absent <Condtype> LINE_SFP_VOA_ABSENT <Pro… |
| 1.3.6.1.4.1.20044.84.2.3.3.24.1.5 | ColumnpmvoaAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.84.2.3.3.24.1.7 | ColumnpmvoaAlmLineOosPortn | read-only | current | VOA Module Out Of Service :This OID indicates that the SFP is In Service or Out of Service<Help> This status indicates if the VOA SFP is in service <Condtype> … |
| 1.3.6.1.4.1.20044.84.2.3.3.24.1.13 | ColumnpmvoaAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.84.2.3.3.40 | TablepmvoaAlmlineAlmTable | not-accessible | current | List of pmvoaAlmlineAlm Article |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1 | RowpmvoaAlmlineAlmEntry | not-accessible | current | Row definition for the pmvoaAlmlineAlm table |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1.1 | ColumnpmvoaAlmlineAlmIndex | read-only | current | Index definition for the pmvoaAlmlineAlm table |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1.2 | ColumnpmvoaAlmOutputErrorPortn | read-only | current | VOA Module Output power Failure :When configured in Constant Output Power, this OID indicates the required output power can�t be reached <Help> When configur… |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1.3 | ColumnpmvoaAlmLossOutputPowerPortn | read-only | current | Loss Of Output Power :This OID indicates that the VOA SFP attenuation is infinite (no output power) <Help> Alarm indicating that the VOA SFP attenuation is inf… |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1.4 | ColumnpmvoaAlmTempHighAlarmPortn | read-only | current | VOA Temp High Alarm :This OID indicates the VOA SFP Temperature is higher than the threshold value written in the SFP <Help> Alarm indicating that the VOA SFP … |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1.5 | ColumnpmvoaAlmTempLowAlarmPortn | read-only | current | VOA Temp Low Alarm :OID indicates the VOA SFP Temperature is lower than the threshold value written in the SFP <Help> Alarm indicating that the VOA SFP Tempera… |
| 1.3.6.1.4.1.20044.84.2.3.3.40.1.6 | ColumnpmvoaAlmLossInputPowerPortn | read-only | current | Loss Of Input Power :This OID indicates that the VOA SFP attenuation has no input power) <Help> Alarm indicating that the VOA SFP attenuation has no input powe… |
| 1.3.6.1.4.1.20044.84.3 | Nodepmvoameasures | |||
| 1.3.6.1.4.1.20044.84.3.1 | NodepmvoaMesrOther | |||
| 1.3.6.1.4.1.20044.84.3.2 | NodepmvoaMesrClient | |||
| 1.3.6.1.4.1.20044.84.3.3 | NodepmvoaMesrLine | |||
| 1.3.6.1.4.1.20044.84.3.3.16 | TablepmvoaMesrlineSfpTempTable | not-accessible | current | List of pmvoaMesrlineSfpTemp Article |
| 1.3.6.1.4.1.20044.84.3.3.16.1 | RowpmvoaMesrlineSfpTempEntry | not-accessible | current | Row definition for the pmvoaMesrlineSfpTemp table |
| 1.3.6.1.4.1.20044.84.3.3.16.1.1 | ColumnpmvoaMesrlineSfpTempIndex | read-only | current | Index definition for the pmvoaMesrlineSfpTemp table |
| 1.3.6.1.4.1.20044.84.3.3.16.1.2 | ColumnpmvoaMesrlineSfpTempPortn | read-only | current | Temperature :This OID gives the temperature value of the VOA SFP (Temperature = AV_S16/256) (Unit = C) <Help> This measure gives the temperature value of the V… |
| 1.3.6.1.4.1.20044.84.3.3.48 | TablepmvoaMesrlinePoutTable | not-accessible | current | List of pmvoaMesrlinePout Article |
| 1.3.6.1.4.1.20044.84.3.3.48.1 | RowpmvoaMesrlinePoutEntry | not-accessible | current | Row definition for the pmvoaMesrlinePout table |
| 1.3.6.1.4.1.20044.84.3.3.48.1.1 | ColumnpmvoaMesrlinePoutIndex | read-only | current | Index definition for the pmvoaMesrlinePout table |
| 1.3.6.1.4.1.20044.84.3.3.48.1.2 | ColumnpmvoaMesrlinePoutPortn | read-only | current | Output Power :This OID gives the output power value of the VOA SFP (Power = 10*log(AV_U16)-40) (Unit = dBm) <Help> This measure gives the output power value of… |
| 1.3.6.1.4.1.20044.84.3.3.64 | TablepmvoaMesrlineEstPinTable | not-accessible | current | List of pmvoaMesrlineEstPin Article |
| 1.3.6.1.4.1.20044.84.3.3.64.1 | RowpmvoaMesrlineEstPinEntry | not-accessible | current | Row definition for the pmvoaMesrlineEstPin table |
| 1.3.6.1.4.1.20044.84.3.3.64.1.1 | ColumnpmvoaMesrlineEstPinIndex | read-only | current | Index definition for the pmvoaMesrlineEstPin table |
| 1.3.6.1.4.1.20044.84.3.3.64.1.2 | ColumnpmvoaMesrlineEstPinPortn | read-only | current | Estimated Input Power :This OID gives the estimated input power value of the VOA SFP (Power = 10*log(AV_U16)-40) (Unit = dBm) <Help> This measure gives the est… |
| 1.3.6.1.4.1.20044.84.6 | NodepmvoacontrolsWrite | |||
| 1.3.6.1.4.1.20044.84.6.1 | NodepmvoaCtrlOther | |||
| 1.3.6.1.4.1.20044.84.6.1.1 | NodepmvoaCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.84.6.1.1.1 | ScalarpmvoaCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.84.6.1.1.2 | ScalarpmvoaCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.84.6.1.1.10 | ScalarpmvoaCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.84.6.1.1.14 | ScalarpmvoaCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.84.6.1.4 | NodepmvoaCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.84.6.1.4.1 | ScalarpmvoaCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.84.6.1.4.2 | ScalarpmvoaCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.84.6.1.5 | NodepmvoaCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.84.6.1.5.2 | ScalarpmvoaCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.84.6.1.5.3 | ScalarpmvoaCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.84.6.1.5.5 | ScalarpmvoaCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.84.6.1.5.6 | ScalarpmvoaCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.84.6.1.6 | NodepmvoaCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.84.6.1.6.1 | ScalarpmvoaCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.84.6.1.6.5 | ScalarpmvoaCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.84.6.1.6.6 | ScalarpmvoaCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.84.6.1.6.7 | ScalarpmvoaCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.84.6.1.6.8 | ScalarpmvoaCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.84.6.1.72 | NodepmvoaCtrlledTest | |||
| 1.3.6.1.4.1.20044.84.6.1.72.1 | ScalarpmvoaCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.84.6.1.72.2 | ScalarpmvoaCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.84.6.1.72.3 | ScalarpmvoaCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.84.6.2 | NodepmvoaCtrlClient | |||
| 1.3.6.1.4.1.20044.84.6.3 | NodepmvoaCtrlLine | |||
| 1.3.6.1.4.1.20044.84.7 | Nodepmvoari | |||
| 1.3.6.1.4.1.20044.84.7.1 | NodepmvoariTable | |||
| 1.3.6.1.4.1.20044.84.7.1.2 | TablepmvoaRinvLineTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.84.7.1.2.1 | RowpmvoaRinvLineEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.84.7.1.2.1.1 | ColumnpmvoaRinvLineIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.84.7.1.2.1.2 | ColumnpmvoaRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.84.7.2 | ScalarpmvoaRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.84.7.3 | ScalarpmvoaRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.84.7.4 | ScalarpmvoaRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.84.7.5 | ScalarpmvoaRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.84.7.6 | ScalarpmvoaRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.84.8 | Nodepmvoadownload | |||
| 1.3.6.1.4.1.20044.84.8.1 | NodepmvoaDwlOther | |||
| 1.3.6.1.4.1.20044.84.8.1.0 | NodepmvoaDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.84.8.1.0.1 | ScalarpmvoaDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.84.8.1.0.2 | ScalarpmvoaDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.84.8.1.1 | NodepmvoaDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.84.8.1.1.1 | ScalarpmvoaDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.84.8.1.1.2 | ScalarpmvoaDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.84.8.1.1.5 | ScalarpmvoaDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.84.8.1.1.6 | ScalarpmvoaDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.84.8.1.2 | NodepmvoaDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.84.8.1.2.1 | ScalarpmvoaDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.84.8.1.2.2 | ScalarpmvoaDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.84.8.1.2.3 | ScalarpmvoaDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.84.8.1.2.4 | ScalarpmvoaDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.84.8.1.2.5 | ScalarpmvoaDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.84.8.1.2.6 | ScalarpmvoaDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.84.8.1.2.7 | ScalarpmvoaDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.84.8.1.2.8 | ScalarpmvoaDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.84.8.2 | NodepmvoaDwlClient | |||
| 1.3.6.1.4.1.20044.84.8.3 | NodepmvoaDwlLine | |||
| 1.3.6.1.4.1.20044.84.9 | NodepmvoaConfig | |||
| 1.3.6.1.4.1.20044.84.9.1 | NodepmvoaCfgStartup | |||
| 1.3.6.1.4.1.20044.84.9.1.1 | TablepmvoaCfgLinexr1StartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.84.9.1.1.1 | RowpmvoaCfgLinexr1StartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.84.9.1.1.1.1 | ColumnpmvoaCfgLinexr1StartupIndex | read-only | current | Index definition for the linexr1Startup table |
| 1.3.6.1.4.1.20044.84.9.1.1.1.3 | ColumnpmvoaCfgSfpModePortn | read-write | current | Default mode on the SFP :This register configures the default initialisation settings on the SFP |
| 1.3.6.1.4.1.20044.84.9.1.1.1.4 | ColumnpmvoaCfgAttenuationCtrlPortn | read-write | current | Default attenuation setting on the SFP :This register configures the default initialisation settings of the attenuation |
| 1.3.6.1.4.1.20044.84.9.1.1.1.5 | ColumnpmvoaCfgPowerCtrlPortn | read-write | current | Default power setting on the SFP :This register configures the default initialisation settings of the power |
| 1.3.6.1.4.1.20044.84.9.1.1.1.6 | ColumnpmvoaCfgLosInputThresholdPortn | read-write | current | Default threshold setting on the SFP :This register configures the default initialisation settings of the input threshold |
| 1.3.6.1.4.1.20044.84.9.1.1.1.7 | ColumnpmvoaCfgInsertionLossValuePortn | read-write | current | Default Insertion Loss setting on the SFP :This register configures the default initialisation settings of the insertion loss value |
| 1.3.6.1.4.1.20044.84.9.2 | NodepmvoaCfgLabels | |||
| 1.3.6.1.4.1.20044.84.9.2.1 | TablepmvoaCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.84.9.2.1.1 | RowpmvoaCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.84.9.2.1.1.1 | ColumnpmvoaCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.84.9.2.1.1.3 | ColumnpmvoaCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.84.9.2.2 | TablepmvoaCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.84.9.2.2.1 | RowpmvoaCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.84.9.2.2.1.1 | ColumnpmvoaCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.84.9.2.2.1.3 | ColumnpmvoaCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.84.9.257 | ScalarpmvoaCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.84.10 | Nodepmvoatraps | |||
| 1.3.6.1.4.1.20044.84.10.2 | ScalarpmvoatrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.84.10.3 | ScalarpmvoatrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.84.10.4 | ScalarpmvoatrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.84.10.34 | NotificationpmvoaLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.84.10.35 | NotificationpmvoaLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.84.10.50 | NotificationpmvoaPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.84.10.51 | NotificationpmvoaPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PmvoaMode | INTEGER { attenuationctrl(0), powerctrl(1) } | current | Mode for the SFP VOA |