EKINOPS-Rm10001wb-MIB
997 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.86 | IdentitymoduleRm10001wb | Creation. | ||
| 1.3.6.1.4.1.20044.86.2 | Noderm10001wbalarms | |||
| 1.3.6.1.4.1.20044.86.2.1 | Noderm10001wbAlmOther | |||
| 1.3.6.1.4.1.20044.86.2.1.1 | Noderm10001wbAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.86.2.1.1.2 | Noderm10001wbAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.86.2.1.1.2.1 | Scalarrm10001wbAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.86.2.1.1.2.2 | Scalarrm10001wbAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.86.2.1.1.2.3 | Scalarrm10001wbAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.86.2.1.1.2.4 | Scalarrm10001wbAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.86.2.1.1.2.5 | Scalarrm10001wbAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.86.2.1.1.338 | Noderm10001wbAlmclientQsfpWarnDdm | |||
| 1.3.6.1.4.1.20044.86.2.1.1.338.1 | Scalarrm10001wbAlmTrscv1VccLowWng1 | read-only | current | Q1 Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.86.2.1.1.338.2 | Scalarrm10001wbAlmTrscv1VccHighWng1 | read-only | current | Q1 Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.86.2.1.1.338.3 | Scalarrm10001wbAlmTrscv1TempLowWng1 | read-only | current | Q1 Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicatin… |
| 1.3.6.1.4.1.20044.86.2.1.1.338.4 | Scalarrm10001wbAlmTrscv1TempHighWng1 | read-only | current | Q1 Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicat… |
| 1.3.6.1.4.1.20044.86.2.1.1.338.5 | Scalarrm10001wbAlmTrscv2VccLowWng1 | read-only | current | Q2 Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.86.2.1.1.338.6 | Scalarrm10001wbAlmTrscv2VccHighWng1 | read-only | current | Q2 Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.86.2.1.1.338.7 | Scalarrm10001wbAlmTrscv2TempLowWng1 | read-only | current | Q2 Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicatin… |
| 1.3.6.1.4.1.20044.86.2.1.1.338.8 | Scalarrm10001wbAlmTrscv2TempHighWng1 | read-only | current | Q2 Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicat… |
| 1.3.6.1.4.1.20044.86.2.1.2 | Noderm10001wbAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.86.2.1.2.337 | Noderm10001wbAlmclientQsfpAlarmDdm | |||
| 1.3.6.1.4.1.20044.86.2.1.2.337.1 | Scalarrm10001wbAlmTrscv1VccLowAla1 | read-only | current | Q1 Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.86.2.1.2.337.2 | Scalarrm10001wbAlmTrscv1VccHighAla1 | read-only | current | Q1 Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.86.2.1.2.337.3 | Scalarrm10001wbAlmTrscv1TempLowAla1 | read-only | current | Q1 Trscv Temp Low Alarm :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.86.2.1.2.337.4 | Scalarrm10001wbAlmTrscv1TempHighAla | read-only | current | Q1 Trscv Temp High Alarm :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.86.2.1.2.337.5 | Scalarrm10001wbAlmTrscv2VccLowAla1 | read-only | current | Q2 Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.86.2.1.2.337.6 | Scalarrm10001wbAlmTrscv2VccHighAla1 | read-only | current | Q2 Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.86.2.1.2.337.7 | Scalarrm10001wbAlmTrscv2TempLowAla1 | read-only | current | Q2 Trscv Temp Low Alarm :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.86.2.1.2.337.8 | Scalarrm10001wbAlmTrscv2TempHighAla1 | read-only | current | Q2 Trscv Temp High Alarm :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.86.2.1.3 | Noderm10001wbAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.86.2.1.3.0 | Noderm10001wbAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.86.2.1.3.0.2 | Scalarrm10001wbAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.86.2.1.3.0.9 | Scalarrm10001wbAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.86.2.1.3.0.15 | Scalarrm10001wbAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.86.2.1.3.0.16 | Scalarrm10001wbAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.86.2.1.3.72 | Noderm10001wbAlmclientModuleState | |||
| 1.3.6.1.4.1.20044.86.2.1.3.72.1 | Scalarrm10001wbAlmCfpInitialize | read-only | current | Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress <Help> Status indicating the Client Trscv initialization is in progr… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.2 | Scalarrm10001wbAlmCfpLowPower | read-only | current | Client Trscv Low Power :This OID indicates the Client Trscv is in low power state <Help> Status indicating the Client Trscv is in low power state <Condtype> CF… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.3 | Scalarrm10001wbAlmCfpHighPowerUp | read-only | current | Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state <Help> Status indicating the Client Trscv is leaving Low Power state… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.4 | Scalarrm10001wbAlmCfpTxOff | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF <Help> Status indicating the Client Trscv Laser is OFF <Condtype> CFP_TX_OFF <Pro… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.5 | Scalarrm10001wbAlmCfpTxTurnOn | read-only | current | Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser <Help> Status indicating the Client Trscv is turning on its laser <Cond… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.6 | Scalarrm10001wbAlmCfpReady | read-only | current | Client Trscv Ready :This OID indicates the Client Trscv is ready to operate <Help> Status indicating the Client Trscv is ready to operate <Condtype> CFP_READY … |
| 1.3.6.1.4.1.20044.86.2.1.3.72.7 | Scalarrm10001wbAlmCfpFault | read-only | current | Client Trscv Fault :This OID indicates the Client Trscv is in Fault state <Help> Status indicating the Client Trscv is in Fault state <Condtype> CFP_FAULT <Pro… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.8 | Scalarrm10001wbAlmCfpTxTurnOff | read-only | current | Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser <Help> Status indicating the Client Trscv is turning off its laser <C… |
| 1.3.6.1.4.1.20044.86.2.1.3.72.9 | Scalarrm10001wbAlmCfpHighPowerDown | read-only | current | Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state <Help> Status indicating the Client Trscv is entering Low Power s… |
| 1.3.6.1.4.1.20044.86.2.1.3.73 | Noderm10001wbAlmclientModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.86.2.1.3.73.4 | Scalarrm10001wbAlmCfpOutOfAlignment | read-only | current | Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Cli… |
| 1.3.6.1.4.1.20044.86.2.1.3.73.5 | Scalarrm10001wbAlmCfpRxNetworkLol | read-only | current | Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface <Help> Alarm indicating of Loss of … |
| 1.3.6.1.4.1.20044.86.2.1.3.73.6 | Scalarrm10001wbAlmCfpRxLos | read-only | current | Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.86.2.1.3.73.7 | Scalarrm10001wbAlmCfpTxHostLol | read-only | current | Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock… |
| 1.3.6.1.4.1.20044.86.2.1.3.73.8 | Scalarrm10001wbAlmCfpTxLosf | read-only | current | Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv <Help> Alarm indicating a Loss of … |
| 1.3.6.1.4.1.20044.86.2.1.3.73.9 | Scalarrm10001wbAlmCfpTxCmuLol | read-only | current | Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv <Help> Alarm indicating a Clock Multipli… |
| 1.3.6.1.4.1.20044.86.2.1.3.73.10 | Scalarrm10001wbAlmCfpTxJitterPllLol | read-only | current | Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv <Help> Alarm indicating a Tx Jitter PLL… |
| 1.3.6.1.4.1.20044.86.2.1.3.73.11 | Scalarrm10001wbAlmCfpLossOfRefclk | read-only | current | Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv <Help> Alarm indicating a Loss of Reference clock … |
| 1.3.6.1.4.1.20044.86.2.1.3.73.14 | Scalarrm10001wbAlmCfpHwInterlock | read-only | current | Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity <Help> Alarm indicating the Client Trscv power i… |
| 1.3.6.1.4.1.20044.86.2.1.3.74 | Noderm10001wbAlmclientGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.86.2.1.3.74.1 | Scalarrm10001wbAlmCfpSoftGlobAlarmTest | read-only | current | Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose <Help> Status indicating … |
| 1.3.6.1.4.1.20044.86.2.1.3.74.7 | Scalarrm10001wbAlmCfpNetworkLaneAlarmWarning2 | read-only | current | Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.8 | Scalarrm10001wbAlmCfpModuleState | read-only | current | Client Trscv Module State :This OID indicates the Client Trscv module state <Help> Synthesis alarm indicating the Client Trscv module state <Condtype> CFP_MODU… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.9 | Scalarrm10001wbAlmCfpModuleGeneralStatus | read-only | current | Client Trscv General Status :This OID indicates the Client Trscv module general status <Help> Synthesis alarm indicating the Client Trscv module general status… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.10 | Scalarrm10001wbAlmCfpModuleFault | read-only | current | Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module <Help> Synthesis alarm indicating at least one Fault is… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.11 | Scalarrm10001wbAlmCfpModuleAlarmWarning1 | read-only | current | Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module <Help> Synthesis alarm indicating … |
| 1.3.6.1.4.1.20044.86.2.1.3.74.12 | Scalarrm10001wbAlmCfpModuleAlarmWarning2 | read-only | current | Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module <Help> Synthesis alarm indicating at least … |
| 1.3.6.1.4.1.20044.86.2.1.3.74.13 | Scalarrm10001wbAlmCfpNetworkLaneAlarmWarning1 | read-only | current | Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.14 | Scalarrm10001wbAlmCfpNetworkLaneFaultStatus | read-only | current | Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface <Help> Synthesis alarm… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.15 | Scalarrm10001wbAlmCfpHostLaneFaultStatus | read-only | current | Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface <Help> Synthesis alarm indic… |
| 1.3.6.1.4.1.20044.86.2.1.3.74.16 | Scalarrm10001wbAlmCfpGlobAlarmAssertion | read-only | current | Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module <Help> Synthesis alarm indicating at least on… |
| 1.3.6.1.4.1.20044.86.2.1.3.78 | Noderm10001wbAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.86.2.1.3.78.1 | Scalarrm10001wbAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.2 | Scalarrm10001wbAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.3 | Scalarrm10001wbAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.4 | Scalarrm10001wbAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.5 | Scalarrm10001wbAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.86.2.1.3.78.6 | Scalarrm10001wbAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.7 | Scalarrm10001wbAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.8 | Scalarrm10001wbAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.9 | Scalarrm10001wbAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.13 | Scalarrm10001wbAlmMsaTempShutdown | read-only | current | Line Trscv Temperature Shutdown :This OID indicates a Trscv shutdown caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature shutdow… |
| 1.3.6.1.4.1.20044.86.2.1.3.78.14 | Scalarrm10001wbAlmMsaTempWarning | read-only | current | Line Trscv Temperature Warning :This OID indicates a Trscv warning caused by a temperature is out of range<Help> Warning indicating a Trscv temperature out of … |
| 1.3.6.1.4.1.20044.86.2.1.3.78.15 | Scalarrm10001wbAlmMsaTempAlarm | read-only | current | Line Trscv Temperature Alarm :This OID indicates a Trscv alarm caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature out of range … |
| 1.3.6.1.4.1.20044.86.2.1.3.79 | Noderm10001wbAlmmsaModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.86.2.1.3.79.4 | Scalarrm10001wbAlmMsaOutOfAlignment | read-only | current | Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Line Tr… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.5 | Scalarrm10001wbAlmMsaRxNetworkLol | read-only | current | Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface <Help> Alarm indicating of Loss of Lo… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.6 | Scalarrm10001wbAlmMsaRxLos | read-only | current | Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.7 | Scalarrm10001wbAlmMsaTxHostLol | read-only | current | Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock is … |
| 1.3.6.1.4.1.20044.86.2.1.3.79.8 | Scalarrm10001wbAlmMsaTxLosf | read-only | current | Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv <Help> Alarm indicating a Loss of Sign… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.9 | Scalarrm10001wbAlmMsaTxCmuLol | read-only | current | Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Clock Multiplier U… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.10 | Scalarrm10001wbAlmMsaTxJitterPllLol | read-only | current | Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Tx Jitter PLL Lo… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.11 | Scalarrm10001wbAlmMsaLossOfRefclk | read-only | current | Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv <Help> Alarm indicating a Loss of Reference clock is d… |
| 1.3.6.1.4.1.20044.86.2.1.3.79.14 | Scalarrm10001wbAlmMsaHwInterlock | read-only | current | Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity <Help> Alarm indicating the Line Trscv power is high… |
| 1.3.6.1.4.1.20044.86.2.1.3.80 | Noderm10001wbAlmmsaGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.86.2.1.3.80.1 | Scalarrm10001wbAlmMsaSoftGlobAlarmTest | read-only | current | Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose <Help> Status indicating the … |
| 1.3.6.1.4.1.20044.86.2.1.3.80.6 | Scalarrm10001wbAlmMsaNetworkHostAlarmStatus | read-only | current | Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv <Help> Synthesis alarm indicating the al… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.7 | Scalarrm10001wbAlmMsaNetworkLaneAlarmWarning2 | read-only | current | Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.8 | Scalarrm10001wbAlmMsaModuleState | read-only | current | Line Trscv Module State :This OID indicates the Line Trscv module state <Help> Synthesis alarm indicating the Line Trscv module state <Condtype> MSA_MODULE_STA… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.9 | Scalarrm10001wbAlmMsaModuleGeneralStatus | read-only | current | Line Trscv General Status :This OID indicates the Line Trscv module general <Help> Synthesis alarm indicating the Line Trscv module general status <Condtype> M… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.10 | Scalarrm10001wbAlmModuleFault | read-only | current | Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Fault is det… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.11 | Scalarrm10001wbAlmMsaModuleAlarmWarning1 | read-only | current | Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.86.2.1.3.80.12 | Scalarrm10001wbAlmMsaModuleAlarmWarning2 | read-only | current | Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.86.2.1.3.80.13 | Scalarrm10001wbAlmMsaNetworkLaneAlarmWarning1 | read-only | current | Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface <Help> Synthesis alarm indicating a… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.14 | Scalarrm10001wbAlmMsaNetworkLaneFaultStatus | read-only | current | Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.15 | Scalarrm10001wbAlmMsaHostLaneFaultStatus | read-only | current | Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface <Help> Synthesis alarm indicatin… |
| 1.3.6.1.4.1.20044.86.2.1.3.80.16 | Scalarrm10001wbAlmMsaGlobAlarmAssertion | read-only | current | Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Al… |
| 1.3.6.1.4.1.20044.86.2.1.3.81 | Noderm10001wbAlmmsaNetworkTxAlignment | |||
| 1.3.6.1.4.1.20044.86.2.1.3.81.12 | Scalarrm10001wbAlmNetTxTimingFault | read-only | current | Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx Timing Fa… |
| 1.3.6.1.4.1.20044.86.2.1.3.81.13 | Scalarrm10001wbAlmNetTxReferenceClockFault | read-only | current | Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a … |
| 1.3.6.1.4.1.20044.86.2.1.3.81.14 | Scalarrm10001wbAlmNetTxCmuLockFault | read-only | current | Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.86.2.1.3.81.15 | Scalarrm10001wbAlmNetTxOutOfAlignment | read-only | current | Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx O… |
| 1.3.6.1.4.1.20044.86.2.1.3.81.16 | Scalarrm10001wbAlmNetTxLossOfAlignment | read-only | current | Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.86.2.1.3.82 | Noderm10001wbAlmmsaNetworkRxAlignment | |||
| 1.3.6.1.4.1.20044.86.2.1.3.82.12 | Scalarrm10001wbAlmNetRxTimingFault | read-only | current | Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx Timing Fa… |
| 1.3.6.1.4.1.20044.86.2.1.3.82.13 | Scalarrm10001wbAlmNetRxOutOfAlignment | read-only | current | Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx O… |
| 1.3.6.1.4.1.20044.86.2.1.3.82.14 | Scalarrm10001wbAlmNetRxLossOfAlignment | read-only | current | Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.86.2.1.3.82.15 | Scalarrm10001wbAlmNetRxModemLockFault | read-only | current | Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx M… |
| 1.3.6.1.4.1.20044.86.2.1.3.82.16 | Scalarrm10001wbAlmNetRxModemSyncDetectFault | read-only | current | Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface <H… |
| 1.3.6.1.4.1.20044.86.2.1.3.83 | Noderm10001wbAlmmsaNetworkHostNetworkAlarmSummary | |||
| 1.3.6.1.4.1.20044.86.2.1.3.83.11 | Scalarrm10001wbAlmNetworkTxAlignment | read-only | current | Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.86.2.1.3.83.12 | Scalarrm10001wbAlmNetworkRxAlignment | read-only | current | Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.86.2.1.3.83.13 | Scalarrm10001wbAlmNetworkRxOtn | read-only | current | Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx OTN Fault i… |
| 1.3.6.1.4.1.20044.86.2.1.3.83.14 | Scalarrm10001wbAlmHostRxAlignment | read-only | current | Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Rx Align… |
| 1.3.6.1.4.1.20044.86.2.1.3.83.15 | Scalarrm10001wbAlmHostTxAlignment | read-only | current | Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx Align… |
| 1.3.6.1.4.1.20044.86.2.1.3.83.16 | Scalarrm10001wbAlmHostTxOtnStatus | read-only | current | Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx OTN Fault is dete… |
| 1.3.6.1.4.1.20044.86.2.1.3.84 | Noderm10001wbAlmmsaHostTxAlignment | |||
| 1.3.6.1.4.1.20044.86.2.1.3.84.13 | Scalarrm10001wbAlmHostTxDeskewLockFault | read-only | current | Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Deske… |
| 1.3.6.1.4.1.20044.86.2.1.3.84.14 | Scalarrm10001wbAlmHostTxOutOfAlignment | read-only | current | Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Out of … |
| 1.3.6.1.4.1.20044.86.2.1.3.84.15 | Scalarrm10001wbAlmHostTxLossOfAlignment | read-only | current | Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Loss … |
| 1.3.6.1.4.1.20044.86.2.1.3.84.16 | Scalarrm10001wbAlmHostTxCdrLockFault | read-only | current | Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.86.2.1.3.85 | Noderm10001wbAlmmsaHostRxAlignment | |||
| 1.3.6.1.4.1.20044.86.2.1.3.85.14 | Scalarrm10001wbAlmHostRxCmuLockFault | read-only | current | Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.86.2.1.3.85.15 | Scalarrm10001wbAlmHostRxOutOfAlignment | read-only | current | Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Out of … |
| 1.3.6.1.4.1.20044.86.2.1.3.85.16 | Scalarrm10001wbAlmHostRxLossOfAlignment | read-only | current | Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Loss … |
| 1.3.6.1.4.1.20044.86.2.2 | Noderm10001wbAlmClient | |||
| 1.3.6.1.4.1.20044.86.2.2.1 | Noderm10001wbAlmClientNurg | |||
| 1.3.6.1.4.1.20044.86.2.2.1.272 | Tablerm10001wbAlmclientSfpWarnDdmTable | not-accessible | current | List of rm10001wbAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1 | Rowrm10001wbAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the rm10001wbAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.1 | Columnrm10001wbAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the rm10001wbAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.2 | Columnrm10001wbAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.3 | Columnrm10001wbAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.4 | Columnrm10001wbAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.5 | Columnrm10001wbAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.16 | Columnrm10001wbAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.86.2.2.1.272.1.17 | Columnrm10001wbAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.86.2.2.2 | Noderm10001wbAlmClientUrg | |||
| 1.3.6.1.4.1.20044.86.2.2.2.152 | Tablerm10001wbAlmclientHostLaneFaultTable | not-accessible | current | List of rm10001wbAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1 | Rowrm10001wbAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the rm10001wbAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.1 | Columnrm10001wbAlmclientHostLaneFaultIndex | read-only | current | Index definition for the rm10001wbAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.2 | Columnrm10001wbAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.3 | Columnrm10001wbAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.4 | Columnrm10001wbAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.5 | Columnrm10001wbAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.6 | Columnrm10001wbAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.7 | Columnrm10001wbAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.10 | Columnrm10001wbAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.86.2.2.2.152.1.11 | Columnrm10001wbAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.86.2.2.2.240 | Tablerm10001wbAlmclientSfpAlmDdmTable | not-accessible | current | List of rm10001wbAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1 | Rowrm10001wbAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the rm10001wbAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.1 | Columnrm10001wbAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the rm10001wbAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.2 | Columnrm10001wbAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.3 | Columnrm10001wbAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.4 | Columnrm10001wbAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.5 | Columnrm10001wbAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.16 | Columnrm10001wbAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.86.2.2.2.240.1.17 | Columnrm10001wbAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.86.2.2.3 | Noderm10001wbAlmClientCrit | |||
| 1.3.6.1.4.1.20044.86.2.2.3.8 | Tablerm10001wbAlmsynthAlmPortTable | not-accessible | current | List of rm10001wbAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1 | Rowrm10001wbAlmsynthAlmPortEntry | not-accessible | current | Row definition for the rm10001wbAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.1 | Columnrm10001wbAlmsynthAlmPortIndex | read-only | current | Index definition for the rm10001wbAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.2 | Columnrm10001wbAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.3 | Columnrm10001wbAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.5 | Columnrm10001wbAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.6 | Columnrm10001wbAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.7 | Columnrm10001wbAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.8 | Columnrm10001wbAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.9 | Columnrm10001wbAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.10 | Columnrm10001wbAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.11 | Columnrm10001wbAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.13 | Columnrm10001wbAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.86.2.2.3.8.1.17 | Columnrm10001wbAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.86.2.3 | Noderm10001wbAlmLine | |||
| 1.3.6.1.4.1.20044.86.2.3.1 | Noderm10001wbAlmLineNurg | |||
| 1.3.6.1.4.1.20044.86.2.3.1.184 | Tablerm10001wbAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of rm10001wbAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1 | Rowrm10001wbAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the rm10001wbAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.1 | Columnrm10001wbAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the rm10001wbAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.2 | Columnrm10001wbAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.3 | Columnrm10001wbAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.4 | Columnrm10001wbAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.5 | Columnrm10001wbAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.6 | Columnrm10001wbAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.7 | Columnrm10001wbAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.8 | Columnrm10001wbAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.9 | Columnrm10001wbAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.10 | Columnrm10001wbAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.11 | Columnrm10001wbAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.12 | Columnrm10001wbAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.13 | Columnrm10001wbAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.14 | Columnrm10001wbAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.15 | Columnrm10001wbAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.16 | Columnrm10001wbAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.86.2.3.1.184.1.17 | Columnrm10001wbAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.86.2.3.1.188 | Tablerm10001wbAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of rm10001wbAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1 | Rowrm10001wbAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the rm10001wbAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.1 | Columnrm10001wbAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the rm10001wbAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.2 | Columnrm10001wbAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.3 | Columnrm10001wbAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.4 | Columnrm10001wbAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.5 | Columnrm10001wbAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.6 | Columnrm10001wbAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.7 | Columnrm10001wbAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.8 | Columnrm10001wbAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.9 | Columnrm10001wbAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.10 | Columnrm10001wbAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.11 | Columnrm10001wbAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.12 | Columnrm10001wbAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.13 | Columnrm10001wbAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.14 | Columnrm10001wbAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.15 | Columnrm10001wbAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.16 | Columnrm10001wbAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.86.2.3.1.188.1.17 | Columnrm10001wbAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.86.2.3.2 | Noderm10001wbAlmLineUrg | |||
| 1.3.6.1.4.1.20044.86.2.3.2.192 | Tablerm10001wbAlmlineNetworkLaneFaultTable | not-accessible | current | List of rm10001wbAlmlineNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1 | Rowrm10001wbAlmlineNetworkLaneFaultEntry | not-accessible | current | Row definition for the rm10001wbAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.1 | Columnrm10001wbAlmlineNetworkLaneFaultIndex | read-only | current | Index definition for the rm10001wbAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.3 | Columnrm10001wbAlmLineLaneRxTecFaultPortn | read-only | current | Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Netwo… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.4 | Columnrm10001wbAlmLineLaneRxFifoErrorPortn | read-only | current | Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Ne… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.5 | Columnrm10001wbAlmLineLaneRxLolPortn | read-only | current | Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.6 | Columnrm10001wbAlmLineLaneRxLosPortn | read-only | current | Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the L… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.8 | Columnrm10001wbAlmLineLaneTxLolPortn | read-only | current | Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.9 | Columnrm10001wbAlmLineLaneTxLosfPortn | read-only | current | Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.15 | Columnrm10001wbAlmLineLaneApdPowerSupplyPortn | read-only | current | Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply f… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.16 | Columnrm10001wbAlmLineLaneWavelengthUnlockedPortn | read-only | current | Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the L… |
| 1.3.6.1.4.1.20044.86.2.3.2.192.1.17 | Columnrm10001wbAlmLineLaneTecFaultPortn | read-only | current | Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network … |
| 1.3.6.1.4.1.20044.86.2.3.2.196 | Tablerm10001wbAlmlineHostLaneFaultTable | not-accessible | current | List of rm10001wbAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1 | Rowrm10001wbAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the rm10001wbAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.1 | Columnrm10001wbAlmlineHostLaneFaultIndex | read-only | current | Index definition for the rm10001wbAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.2 | Columnrm10001wbAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.3 | Columnrm10001wbAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.4 | Columnrm10001wbAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.5 | Columnrm10001wbAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.6 | Columnrm10001wbAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.7 | Columnrm10001wbAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.10 | Columnrm10001wbAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.86.2.3.2.196.1.11 | Columnrm10001wbAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.86.2.3.2.200 | Tablerm10001wbAlmlineNetworkLaneRxOtnTable | not-accessible | current | List of rm10001wbAlmlineNetworkLaneRxOtn Article |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1 | Rowrm10001wbAlmlineNetworkLaneRxOtnEntry | not-accessible | current | Row definition for the rm10001wbAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.1 | Columnrm10001wbAlmlineNetworkLaneRxOtnIndex | read-only | current | Index definition for the rm10001wbAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.10 | Columnrm10001wbAlmLineRxOtnOduAisPortn | read-only | current | Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.11 | Columnrm10001wbAlmLineRxOtnOtuAisPortn | read-only | current | Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.12 | Columnrm10001wbAlmLineRxSmBdiPortn | read-only | current | Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.13 | Columnrm10001wbAlmLineRxOtnIaePortn | read-only | current | Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incomi… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.14 | Columnrm10001wbAlmLineRxOtnOomPortn | read-only | current | Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multif… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.15 | Columnrm10001wbAlmLineRxOtnLomPortn | read-only | current | Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multif… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.16 | Columnrm10001wbAlmLineRxOtnOofPortn | read-only | current | Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is de… |
| 1.3.6.1.4.1.20044.86.2.3.2.200.1.17 | Columnrm10001wbAlmLineRxOtnLofPortn | read-only | current | Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is de… |
| 1.3.6.1.4.1.20044.86.2.3.2.204 | Tablerm10001wbAlmlineHostLaneTxOtnTable | not-accessible | current | List of rm10001wbAlmlineHostLaneTxOtn Article |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1 | Rowrm10001wbAlmlineHostLaneTxOtnEntry | not-accessible | current | Row definition for the rm10001wbAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.1 | Columnrm10001wbAlmlineHostLaneTxOtnIndex | read-only | current | Index definition for the rm10001wbAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.10 | Columnrm10001wbAlmLineTxOtnOduAisPortn | read-only | current | Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OD… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.11 | Columnrm10001wbAlmLineTxOtnOtuAisPortn | read-only | current | Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OT… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.12 | Columnrm10001wbAlmLineTxSmBdiPortn | read-only | current | Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM B… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.13 | Columnrm10001wbAlmLineTxOtnIaePortn | read-only | current | Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Ali… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.14 | Columnrm10001wbAlmLineTxOtnOomPortn | read-only | current | Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe i… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.15 | Columnrm10001wbAlmLineTxOtnLomPortn | read-only | current | Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe i… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.16 | Columnrm10001wbAlmLineTxOtnOofPortn | read-only | current | Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected… |
| 1.3.6.1.4.1.20044.86.2.3.2.204.1.17 | Columnrm10001wbAlmLineTxOtnLofPortn | read-only | current | Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected… |
| 1.3.6.1.4.1.20044.86.2.3.3 | Noderm10001wbAlmLineCrit | |||
| 1.3.6.1.4.1.20044.86.2.3.3.40 | Tablerm10001wbAlmsynthAlmLineTable | not-accessible | current | List of rm10001wbAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1 | Rowrm10001wbAlmsynthAlmLineEntry | not-accessible | current | Row definition for the rm10001wbAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.1 | Columnrm10001wbAlmsynthAlmLineIndex | read-only | current | Index definition for the rm10001wbAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.2 | Columnrm10001wbAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.3 | Columnrm10001wbAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.5 | Columnrm10001wbAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.6 | Columnrm10001wbAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.7 | Columnrm10001wbAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.9 | Columnrm10001wbAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.10 | Columnrm10001wbAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.11 | Columnrm10001wbAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.13 | Columnrm10001wbAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.86.2.3.3.40.1.17 | Columnrm10001wbAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.86.3 | Noderm10001wbmeasures | |||
| 1.3.6.1.4.1.20044.86.3.1 | Noderm10001wbMesrOther | |||
| 1.3.6.1.4.1.20044.86.3.1.0 | Scalarrm10001wbMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.86.3.1.1 | Scalarrm10001wbMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.86.3.1.7 | Scalarrm10001wbMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.86.3.1.196 | Scalarrm10001wbMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.86.3.1.197 | Scalarrm10001wbMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.86.3.1.198 | Scalarrm10001wbMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.86.3.1.199 | Scalarrm10001wbMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.86.3.1.200 | Scalarrm10001wbMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion … |
| 1.3.6.1.4.1.20044.86.3.1.201 | Scalarrm10001wbMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = ps)<Help> … |
| 1.3.6.1.4.1.20044.86.3.1.202 | Scalarrm10001wbMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB) <Help> This measure gi… |
| 1.3.6.1.4.1.20044.86.3.1.203 | Scalarrm10001wbMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Uni… |
| 1.3.6.1.4.1.20044.86.3.1.204 | Scalarrm10001wbMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the av… |
| 1.3.6.1.4.1.20044.86.3.1.212 | Scalarrm10001wbMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.86.3.1.213 | Scalarrm10001wbMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.86.3.1.214 | Scalarrm10001wbMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.86.3.1.215 | Scalarrm10001wbMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.86.3.1.216 | Scalarrm10001wbMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.86.3.1.217 | Scalarrm10001wbMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.86.3.1.218 | Scalarrm10001wbMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.86.3.1.219 | Scalarrm10001wbMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.86.3.1.220 | Scalarrm10001wbMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the minimu… |
| 1.3.6.1.4.1.20044.86.3.1.228 | Scalarrm10001wbMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.86.3.1.229 | Scalarrm10001wbMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.86.3.1.230 | Scalarrm10001wbMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.86.3.1.231 | Scalarrm10001wbMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.86.3.1.232 | Scalarrm10001wbMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.86.3.1.233 | Scalarrm10001wbMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.86.3.1.234 | Scalarrm10001wbMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.86.3.1.235 | Scalarrm10001wbMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.86.3.1.236 | Scalarrm10001wbMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the maximu… |
| 1.3.6.1.4.1.20044.86.3.1.249 | Scalarrm10001wbMesrregVoltage | read-only | current | Regulator Voltage :This OID gives the voltage value of the Regulator (Voltage = AV_U16) (Unit = mV) <Help> This Measure gives the Regulator Voltage |
| 1.3.6.1.4.1.20044.86.3.1.250 | Scalarrm10001wbMesrregCurrent | read-only | current | Regulator Current :This OID gives the current value of the Regulator (Current = AV_U16/1000) (Unit = A) <Help> This Measure gives the Regulator Current |
| 1.3.6.1.4.1.20044.86.3.1.251 | Scalarrm10001wbMesrregTemp | read-only | current | Regulator Temperature :This OID gives the temperature value of the Regulator (Temperature = AV_S16) (Unit = C) <Help> This Measure gives the Regulator Temperat… |
| 1.3.6.1.4.1.20044.86.3.1.252 | Scalarrm10001wbMesrtrscv1Temp | read-only | current | Q1 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Un… |
| 1.3.6.1.4.1.20044.86.3.1.253 | Scalarrm10001wbMesrtrscv2Temp | read-only | current | Q2 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Un… |
| 1.3.6.1.4.1.20044.86.3.1.254 | Scalarrm10001wbMesrtrscv1PowerSupply | read-only | current | Q1 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.86.3.1.255 | Scalarrm10001wbMesrtrscv2PowerSupply | read-only | current | Q2 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.86.3.2 | Noderm10001wbMesrClient | |||
| 1.3.6.1.4.1.20044.86.3.2.8 | Scalarrm10001wbMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S… |
| 1.3.6.1.4.1.20044.86.3.2.9 | Scalarrm10001wbMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.86.3.2.10 | Scalarrm10001wbMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit… |
| 1.3.6.1.4.1.20044.86.3.2.16 | Tablerm10001wbMesrclientTxPwrMinTable | not-accessible | current | List of rm10001wbMesrclientTxPwrMin Article |
| 1.3.6.1.4.1.20044.86.3.2.16.1 | Rowrm10001wbMesrclientTxPwrMinEntry | not-accessible | current | Row definition for the rm10001wbMesrclientTxPwrMin table |
| 1.3.6.1.4.1.20044.86.3.2.16.1.1 | Columnrm10001wbMesrclientTxPwrMinIndex | read-only | current | Index definition for the rm10001wbMesrclientTxPwrMin table |
| 1.3.6.1.4.1.20044.86.3.2.16.1.2 | Columnrm10001wbMesrclientTxPwrMinPortn | read-only | current | Min Client Trscv Tx Power Per Lane :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit… |
| 1.3.6.1.4.1.20044.86.3.2.48 | Tablerm10001wbMesrclientRxPwrMinTable | not-accessible | current | List of rm10001wbMesrclientRxPwrMin Article |
| 1.3.6.1.4.1.20044.86.3.2.48.1 | Rowrm10001wbMesrclientRxPwrMinEntry | not-accessible | current | Row definition for the rm10001wbMesrclientRxPwrMin table |
| 1.3.6.1.4.1.20044.86.3.2.48.1.1 | Columnrm10001wbMesrclientRxPwrMinIndex | read-only | current | Index definition for the rm10001wbMesrclientRxPwrMin table |
| 1.3.6.1.4.1.20044.86.3.2.48.1.2 | Columnrm10001wbMesrclientRxPwrMinPortn | read-only | current | Min Client Trscv Rx Power Per Lane :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read from the DDM (Digita… |
| 1.3.6.1.4.1.20044.86.3.2.80 | Tablerm10001wbMesrclientTxPwrMaxTable | not-accessible | current | List of rm10001wbMesrclientTxPwrMax Article |
| 1.3.6.1.4.1.20044.86.3.2.80.1 | Rowrm10001wbMesrclientTxPwrMaxEntry | not-accessible | current | Row definition for the rm10001wbMesrclientTxPwrMax table |
| 1.3.6.1.4.1.20044.86.3.2.80.1.1 | Columnrm10001wbMesrclientTxPwrMaxIndex | read-only | current | Index definition for the rm10001wbMesrclientTxPwrMax table |
| 1.3.6.1.4.1.20044.86.3.2.80.1.2 | Columnrm10001wbMesrclientTxPwrMaxPortn | read-only | current | Max Client Trscv Tx Power Per Lane :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit… |
| 1.3.6.1.4.1.20044.86.3.2.112 | Tablerm10001wbMesrclientRxPwrMaxTable | not-accessible | current | List of rm10001wbMesrclientRxPwrMax Article |
| 1.3.6.1.4.1.20044.86.3.2.112.1 | Rowrm10001wbMesrclientRxPwrMaxEntry | not-accessible | current | Row definition for the rm10001wbMesrclientRxPwrMax table |
| 1.3.6.1.4.1.20044.86.3.2.112.1.1 | Columnrm10001wbMesrclientRxPwrMaxIndex | read-only | current | Index definition for the rm10001wbMesrclientRxPwrMax table |
| 1.3.6.1.4.1.20044.86.3.2.112.1.2 | Columnrm10001wbMesrclientRxPwrMaxPortn | read-only | current | Max Client Trscv Rx Power Per Lane :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital … |
| 1.3.6.1.4.1.20044.86.3.2.256 | Tablerm10001wbMesrclientTxCompositePwrTable | not-accessible | current | List of rm10001wbMesrclientTxCompositePwr Article |
| 1.3.6.1.4.1.20044.86.3.2.256.1 | Rowrm10001wbMesrclientTxCompositePwrEntry | not-accessible | current | Row definition for the rm10001wbMesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.86.3.2.256.1.1 | Columnrm10001wbMesrclientTxCompositePwrIndex | read-only | current | Index definition for the rm10001wbMesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.86.3.2.256.1.2 | Columnrm10001wbMesrclientTxCompositePwrPortn | read-only | current | Client Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from… |
| 1.3.6.1.4.1.20044.86.3.2.288 | Tablerm10001wbMesrclientRxCompositePwrTable | not-accessible | current | List of rm10001wbMesrclientRxCompositePwr Article |
| 1.3.6.1.4.1.20044.86.3.2.288.1 | Rowrm10001wbMesrclientRxCompositePwrEntry | not-accessible | current | Row definition for the rm10001wbMesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.86.3.2.288.1.1 | Columnrm10001wbMesrclientRxCompositePwrIndex | read-only | current | Index definition for the rm10001wbMesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.86.3.2.288.1.2 | Columnrm10001wbMesrclientRxCompositePwrPortn | read-only | current | Client Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from t… |
| 1.3.6.1.4.1.20044.86.3.3 | Noderm10001wbMesrLine | |||
| 1.3.6.1.4.1.20044.86.3.3.12 | Scalarrm10001wbMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/2… |
| 1.3.6.1.4.1.20044.86.3.3.13 | Scalarrm10001wbMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000) (U… |
| 1.3.6.1.4.1.20044.86.3.3.14 | Scalarrm10001wbMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.86.3.3.144 | Tablerm10001wbMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of rm10001wbMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.86.3.3.144.1 | Rowrm10001wbMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the rm10001wbMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.86.3.3.144.1.1 | Columnrm10001wbMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the rm10001wbMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.86.3.3.144.1.2 | Columnrm10001wbMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.86.3.3.148 | Tablerm10001wbMesrlineNetTxLaserTempTable | not-accessible | current | List of rm10001wbMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.86.3.3.148.1 | Rowrm10001wbMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the rm10001wbMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.86.3.3.148.1.1 | Columnrm10001wbMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the rm10001wbMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.86.3.3.148.1.2 | Columnrm10001wbMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.86.3.3.152 | Tablerm10001wbMesrlineNetTxBiasCurrentTable | not-accessible | current | List of rm10001wbMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.86.3.3.152.1 | Rowrm10001wbMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the rm10001wbMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.86.3.3.152.1.1 | Columnrm10001wbMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the rm10001wbMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.86.3.3.152.1.2 | Columnrm10001wbMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_… |
| 1.3.6.1.4.1.20044.86.3.3.156 | Tablerm10001wbMesrlineNetRxInputPwrTable | not-accessible | current | List of rm10001wbMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.86.3.3.156.1 | Rowrm10001wbMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the rm10001wbMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.86.3.3.156.1.1 | Columnrm10001wbMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the rm10001wbMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.86.3.3.156.1.2 | Columnrm10001wbMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/10… |
| 1.3.6.1.4.1.20044.86.3.3.160 | Tablerm10001wbMesrlineResidualChromaticDispTable | not-accessible | current | List of rm10001wbMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.86.3.3.160.1 | Rowrm10001wbMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the rm10001wbMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.86.3.3.160.1.1 | Columnrm10001wbMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the rm10001wbMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.86.3.3.160.1.2 | Columnrm10001wbMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_S16*(-2)) (Unit = ps/nm)… |
| 1.3.6.1.4.1.20044.86.3.3.164 | Tablerm10001wbMesrlineDiffGroupDelayTable | not-accessible | current | List of rm10001wbMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.86.3.3.164.1 | Rowrm10001wbMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the rm10001wbMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.86.3.3.164.1.1 | Columnrm10001wbMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the rm10001wbMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.86.3.3.164.1.2 | Columnrm10001wbMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Delay = AV_S16) (Unit = ps)<Help> This measure giv… |
| 1.3.6.1.4.1.20044.86.3.3.168 | Tablerm10001wbMesrlineQFactorTable | not-accessible | current | List of rm10001wbMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.86.3.3.168.1 | Rowrm10001wbMesrlineQFactorEntry | not-accessible | current | Row definition for the rm10001wbMesrlineQFactor table |
| 1.3.6.1.4.1.20044.86.3.3.168.1.1 | Columnrm10001wbMesrlineQFactorIndex | read-only | current | Index definition for the rm10001wbMesrlineQFactor table |
| 1.3.6.1.4.1.20044.86.3.3.168.1.2 | Columnrm10001wbMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Q Factor = AV_U16) (Unit = dB) <Help> This measure gives the current Q Factor on t… |
| 1.3.6.1.4.1.20044.86.3.3.172 | Tablerm10001wbMesrlineCarrierFreqOffsetTable | not-accessible | current | List of rm10001wbMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.86.3.3.172.1 | Rowrm10001wbMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the rm10001wbMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.86.3.3.172.1.1 | Columnrm10001wbMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the rm10001wbMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.86.3.3.172.1.2 | Columnrm10001wbMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Offset = AV_S16) (Unit = MHz)<Help> This measure g… |
| 1.3.6.1.4.1.20044.86.3.3.176 | Tablerm10001wbMesrlineOsnrTable | not-accessible | current | List of rm10001wbMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.86.3.3.176.1 | Rowrm10001wbMesrlineOsnrEntry | not-accessible | current | Row definition for the rm10001wbMesrlineOsnr table |
| 1.3.6.1.4.1.20044.86.3.3.176.1.1 | Columnrm10001wbMesrlineOsnrIndex | read-only | current | Index definition for the rm10001wbMesrlineOsnr table |
| 1.3.6.1.4.1.20044.86.3.3.176.1.2 | Columnrm10001wbMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interf… |
| 1.3.6.1.4.1.20044.86.4 | Noderm10001wbcounters | |||
| 1.3.6.1.4.1.20044.86.4.1 | Noderm10001wbCntOther | |||
| 1.3.6.1.4.1.20044.86.4.2 | Noderm10001wbCntClient | |||
| 1.3.6.1.4.1.20044.86.4.2.112 | Tablerm10001wbCntclientInputErrorCounterTable | not-accessible | current | List of rm10001wbCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.86.4.2.112.1 | Rowrm10001wbCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the rm10001wbCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.2.112.1.1 | Columnrm10001wbCntclientInputErrorCounterIndex | read-only | current | Index definition for the rm10001wbCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.2.112.1.2 | Columnrm10001wbCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.86.4.2.112.1.3 | Columnrm10001wbCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.2.112.1.4 | Columnrm10001wbCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.2.144 | Tablerm10001wbCntclientCbipCounterTable | not-accessible | current | List of rm10001wbCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.86.4.2.144.1 | Rowrm10001wbCntclientCbipCounterEntry | not-accessible | current | Row definition for the rm10001wbCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.86.4.2.144.1.1 | Columnrm10001wbCntclientCbipCounterIndex | read-only | current | Index definition for the rm10001wbCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.86.4.2.144.1.2 | Columnrm10001wbCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.86.4.2.144.1.3 | Columnrm10001wbCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.2.144.1.4 | Columnrm10001wbCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.3 | Noderm10001wbCntLine | |||
| 1.3.6.1.4.1.20044.86.4.3.192 | Tablerm10001wbCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of rm10001wbCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.192.1 | Rowrm10001wbCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm10001wbCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.192.1.1 | Columnrm10001wbCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm10001wbCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.192.1.2 | Columnrm10001wbCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate a… |
| 1.3.6.1.4.1.20044.86.4.3.192.1.3 | Columnrm10001wbCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.3.192.1.4 | Columnrm10001wbCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.3.193 | Tablerm10001wbCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of rm10001wbCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.193.1 | Rowrm10001wbCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the rm10001wbCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.86.4.3.193.1.1 | Columnrm10001wbCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the rm10001wbCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.86.4.3.193.1.2 | Columnrm10001wbCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.86.4.3.193.1.3 | Columnrm10001wbCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.86.4.3.193.1.4 | Columnrm10001wbCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.86.4.3.194 | Tablerm10001wbCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of rm10001wbCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.194.1 | Rowrm10001wbCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm10001wbCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.194.1.1 | Columnrm10001wbCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm10001wbCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.194.1.2 | Columnrm10001wbCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.86.4.3.194.1.3 | Columnrm10001wbCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.86.4.3.194.1.4 | Columnrm10001wbCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.86.4.3.195 | Tablerm10001wbCntlineDfrmTimCntTable | not-accessible | current | List of rm10001wbCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.86.4.3.195.1 | Rowrm10001wbCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the rm10001wbCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.86.4.3.195.1.1 | Columnrm10001wbCntlineDfrmTimCntIndex | read-only | current | Index definition for the rm10001wbCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.86.4.3.195.1.2 | Columnrm10001wbCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.86.4.3.195.1.3 | Columnrm10001wbCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.3.195.1.4 | Columnrm10001wbCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.3.196 | Tablerm10001wbCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of rm10001wbCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.196.1 | Rowrm10001wbCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the rm10001wbCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.196.1.1 | Columnrm10001wbCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the rm10001wbCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.196.1.2 | Columnrm10001wbCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC |
| 1.3.6.1.4.1.20044.86.4.3.196.1.3 | Columnrm10001wbCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.3.196.1.4 | Columnrm10001wbCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.3.197 | Tablerm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of rm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.197.1 | Rowrm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the rm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.197.1.1 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the rm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.86.4.3.197.1.2 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate a… |
| 1.3.6.1.4.1.20044.86.4.3.197.1.3 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.3.197.1.4 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.3.198 | Tablerm10001wbCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of rm10001wbCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.198.1 | Rowrm10001wbCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the rm10001wbCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.86.4.3.198.1.1 | Columnrm10001wbCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the rm10001wbCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.86.4.3.198.1.2 | Columnrm10001wbCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.86.4.3.198.1.3 | Columnrm10001wbCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.3.198.1.4 | Columnrm10001wbCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.86.4.3.199 | Tablerm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of rm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.86.4.3.199.1 | Rowrm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the rm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.86.4.3.199.1.1 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the rm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.86.4.3.199.1.2 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.86.4.3.199.1.3 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.86.4.3.199.1.4 | Columnrm10001wbCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.86.6 | Noderm10001wbcontrolsWrite | |||
| 1.3.6.1.4.1.20044.86.6.1 | Noderm10001wbCtrlOther | |||
| 1.3.6.1.4.1.20044.86.6.1.1 | Noderm10001wbCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.86.6.1.1.1 | Scalarrm10001wbCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.86.6.1.1.2 | Scalarrm10001wbCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.86.6.1.1.10 | Scalarrm10001wbCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.86.6.1.1.14 | Scalarrm10001wbCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.86.6.1.4 | Noderm10001wbCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.86.6.1.4.1 | Scalarrm10001wbCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.86.6.1.4.2 | Scalarrm10001wbCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.86.6.1.5 | Noderm10001wbCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.86.6.1.5.2 | Scalarrm10001wbCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.86.6.1.5.3 | Scalarrm10001wbCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.86.6.1.5.5 | Scalarrm10001wbCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.86.6.1.5.6 | Scalarrm10001wbCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.86.6.1.6 | Noderm10001wbCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.86.6.1.6.1 | Scalarrm10001wbCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.86.6.1.6.5 | Scalarrm10001wbCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.86.6.1.6.6 | Scalarrm10001wbCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.86.6.1.6.7 | Scalarrm10001wbCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.86.6.1.6.8 | Scalarrm10001wbCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.86.6.1.192 | Noderm10001wbCtrlledTest | |||
| 1.3.6.1.4.1.20044.86.6.1.192.1 | Scalarrm10001wbCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.86.6.1.192.2 | Scalarrm10001wbCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.86.6.1.192.3 | Scalarrm10001wbCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.86.6.1.201 | Noderm10001wbCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.86.6.1.201.1 | Scalarrm10001wbCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.86.6.1.259 | Noderm10001wbCtrlresetCount | |||
| 1.3.6.1.4.1.20044.86.6.1.259.1 | Scalarrm10001wbCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.86.6.1.260 | Noderm10001wbCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.86.6.1.260.1 | Scalarrm10001wbCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.86.6.1.261 | Noderm10001wbCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.86.6.1.261.1 | Scalarrm10001wbCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.86.6.2 | Noderm10001wbCtrlClient | |||
| 1.3.6.1.4.1.20044.86.6.2.16 | Tablerm10001wbCtrlaccessLoopTable | not-accessible | current | List of rm10001wbCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.86.6.2.16.1 | Rowrm10001wbCtrlaccessLoopEntry | not-accessible | current | Row definition for the rm10001wbCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.86.6.2.16.1.1 | Columnrm10001wbCtrlaccessLoopIndex | read-only | current | Index definition for the rm10001wbCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.86.6.2.16.1.2 | Columnrm10001wbCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.86.6.2.17 | Tablerm10001wbCtrlclientLoopToLineTable | not-accessible | current | List of rm10001wbCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.86.6.2.17.1 | Rowrm10001wbCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the rm10001wbCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.86.6.2.17.1.1 | Columnrm10001wbCtrlclientLoopToLineIndex | read-only | current | Index definition for the rm10001wbCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.86.6.2.17.1.2 | Columnrm10001wbCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.86.6.2.21 | Tablerm10001wbCtrlcsfUpInsTable | not-accessible | current | List of rm10001wbCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.86.6.2.21.1 | Rowrm10001wbCtrlcsfUpInsEntry | not-accessible | current | Row definition for the rm10001wbCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.86.6.2.21.1.1 | Columnrm10001wbCtrlcsfUpInsIndex | read-only | current | Index definition for the rm10001wbCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.86.6.2.21.1.2 | Columnrm10001wbCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.86.6.2.22 | Tablerm10001wbCtrlcaisDwInsTable | not-accessible | current | List of rm10001wbCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.86.6.2.22.1 | Rowrm10001wbCtrlcaisDwInsEntry | not-accessible | current | Row definition for the rm10001wbCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.86.6.2.22.1.1 | Columnrm10001wbCtrlcaisDwInsIndex | read-only | current | Index definition for the rm10001wbCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.86.6.2.22.1.2 | Columnrm10001wbCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.86.6.2.262 | Tablerm10001wbCtrlclientResetAllCountTable | not-accessible | current | List of rm10001wbCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.86.6.2.262.1 | Rowrm10001wbCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the rm10001wbCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.86.6.2.262.1.1 | Columnrm10001wbCtrlclientResetAllCountIndex | read-only | current | Index definition for the rm10001wbCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.86.6.2.262.1.2 | Columnrm10001wbCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.86.6.3 | Noderm10001wbCtrlLine | |||
| 1.3.6.1.4.1.20044.86.6.3.64 | Tablerm10001wbCtrlcommAccessLoopTable | not-accessible | current | List of rm10001wbCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.86.6.3.64.1 | Rowrm10001wbCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the rm10001wbCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.86.6.3.64.1.1 | Columnrm10001wbCtrlcommAccessLoopIndex | read-only | current | Index definition for the rm10001wbCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.86.6.3.64.1.2 | Columnrm10001wbCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.86.6.3.66 | Tablerm10001wbCtrllineLoopTable | not-accessible | current | List of rm10001wbCtrllineLoop Article |
| 1.3.6.1.4.1.20044.86.6.3.66.1 | Rowrm10001wbCtrllineLoopEntry | not-accessible | current | Row definition for the rm10001wbCtrllineLoop table |
| 1.3.6.1.4.1.20044.86.6.3.66.1.1 | Columnrm10001wbCtrllineLoopIndex | read-only | current | Index definition for the rm10001wbCtrllineLoop table |
| 1.3.6.1.4.1.20044.86.6.3.66.1.2 | Columnrm10001wbCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.86.6.3.69 | Tablerm10001wbCtrlfecDisableTable | not-accessible | current | List of rm10001wbCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.86.6.3.69.1 | Rowrm10001wbCtrlfecDisableEntry | not-accessible | current | Row definition for the rm10001wbCtrlfecDisable table |
| 1.3.6.1.4.1.20044.86.6.3.69.1.1 | Columnrm10001wbCtrlfecDisableIndex | read-only | current | Index definition for the rm10001wbCtrlfecDisable table |
| 1.3.6.1.4.1.20044.86.6.3.69.1.2 | Columnrm10001wbCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.86.6.3.209 | Tablerm10001wbCtrlmsaLineLoopTable | not-accessible | current | List of rm10001wbCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.86.6.3.209.1 | Rowrm10001wbCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the rm10001wbCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.86.6.3.209.1.1 | Columnrm10001wbCtrlmsaLineLoopIndex | read-only | current | Index definition for the rm10001wbCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.86.6.3.209.1.2 | Columnrm10001wbCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.86.6.3.210 | Tablerm10001wbCtrlmsaRestartTable | not-accessible | current | List of rm10001wbCtrlmsaRestart Article |
| 1.3.6.1.4.1.20044.86.6.3.210.1 | Rowrm10001wbCtrlmsaRestartEntry | not-accessible | current | Row definition for the rm10001wbCtrlmsaRestart table |
| 1.3.6.1.4.1.20044.86.6.3.210.1.1 | Columnrm10001wbCtrlmsaRestartIndex | read-only | current | Index definition for the rm10001wbCtrlmsaRestart table |
| 1.3.6.1.4.1.20044.86.6.3.210.1.2 | Columnrm10001wbCtrlmsaRestartPortn | read-write | current | Force Line Restart :This OID forces the restart of the line after a shutdown due to Line high temperature<Help> This parameter forces the restart of the line a… |
| 1.3.6.1.4.1.20044.86.6.3.263 | Tablerm10001wbCtrllineResetAllCountTable | not-accessible | current | List of rm10001wbCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.86.6.3.263.1 | Rowrm10001wbCtrllineResetAllCountEntry | not-accessible | current | Row definition for the rm10001wbCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.86.6.3.263.1.1 | Columnrm10001wbCtrllineResetAllCountIndex | read-only | current | Index definition for the rm10001wbCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.86.6.3.263.1.2 | Columnrm10001wbCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.86.7 | Noderm10001wbri | |||
| 1.3.6.1.4.1.20044.86.7.1 | Noderm10001wbriTable | |||
| 1.3.6.1.4.1.20044.86.7.1.1 | Tablerm10001wbRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.86.7.1.1.1 | Rowrm10001wbRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.86.7.1.1.1.1 | Columnrm10001wbRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.86.7.1.1.1.2 | Columnrm10001wbRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.86.7.1.2 | Tablerm10001wbRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.86.7.1.2.1 | Rowrm10001wbRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.86.7.1.2.1.1 | Columnrm10001wbRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.86.7.1.2.1.2 | Columnrm10001wbRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.86.7.2 | Scalarrm10001wbRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.86.7.3 | Scalarrm10001wbRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.86.7.4 | Scalarrm10001wbRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.86.7.5 | Scalarrm10001wbRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.86.7.6 | Scalarrm10001wbRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.86.8 | Noderm10001wbdownload | |||
| 1.3.6.1.4.1.20044.86.8.1 | Noderm10001wbDwlOther | |||
| 1.3.6.1.4.1.20044.86.8.1.0 | Noderm10001wbDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.86.8.1.0.1 | Scalarrm10001wbDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.86.8.1.0.2 | Scalarrm10001wbDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.86.8.1.1 | Noderm10001wbDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.86.8.1.1.1 | Scalarrm10001wbDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.86.8.1.1.2 | Scalarrm10001wbDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.86.8.1.1.5 | Scalarrm10001wbDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.86.8.1.1.6 | Scalarrm10001wbDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.86.8.1.2 | Noderm10001wbDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.86.8.1.2.1 | Scalarrm10001wbDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.86.8.1.2.2 | Scalarrm10001wbDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.86.8.1.2.3 | Scalarrm10001wbDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.86.8.1.2.4 | Scalarrm10001wbDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.86.8.1.2.5 | Scalarrm10001wbDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.86.8.1.2.6 | Scalarrm10001wbDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.86.8.1.2.7 | Scalarrm10001wbDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.86.8.1.2.8 | Scalarrm10001wbDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.86.8.2 | Noderm10001wbDwlClient | |||
| 1.3.6.1.4.1.20044.86.8.3 | Noderm10001wbDwlLine | |||
| 1.3.6.1.4.1.20044.86.9 | Noderm10001wbConfig | |||
| 1.3.6.1.4.1.20044.86.9.1 | Noderm10001wbCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.86.9.1.1 | Tablerm10001wbCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.1.1.1 | Rowrm10001wbCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.86.9.1.1.1.1 | Columnrm10001wbCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.86.9.1.1.1.3 | Columnrm10001wbCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.86.9.2 | Noderm10001wbCfgStartup | |||
| 1.3.6.1.4.1.20044.86.9.2.1 | Tablerm10001wbCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.2.1.1 | Rowrm10001wbCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.86.9.2.1.1.1 | Columnrm10001wbCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.86.9.2.1.1.3 | Columnrm10001wbCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.86.9.2.1.1.4 | Columnrm10001wbCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.86.9.2.1.1.14 | Columnrm10001wbCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.86.9.2.2 | Tablerm10001wbCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.2.2.1 | Rowrm10001wbCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.86.9.2.2.1.1 | Columnrm10001wbCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.86.9.2.2.1.3 | Columnrm10001wbCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.86.9.2.2.1.14 | Columnrm10001wbCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.86.9.2.3 | Tablerm10001wbCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.2.3.1 | Rowrm10001wbCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.86.9.2.3.1.1 | Columnrm10001wbCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.86.9.2.3.1.3 | Columnrm10001wbCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.86.9.3 | Noderm10001wbCfgLabels | |||
| 1.3.6.1.4.1.20044.86.9.3.1 | Tablerm10001wbCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.3.1.1 | Rowrm10001wbCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.86.9.3.1.1.1 | Columnrm10001wbCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.86.9.3.1.1.3 | Columnrm10001wbCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.86.9.3.2 | Tablerm10001wbCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.3.2.1 | Rowrm10001wbCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.86.9.3.2.1.1 | Columnrm10001wbCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.86.9.3.2.1.3 | Columnrm10001wbCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.86.9.4 | Noderm10001wbCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.86.9.4.1 | Tablerm10001wbCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.4.1.1 | Rowrm10001wbCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.86.9.4.1.1.1 | Columnrm10001wbCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.86.9.4.1.1.6 | Columnrm10001wbCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.86.9.4.1.1.7 | Columnrm10001wbCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.86.9.4.1.1.8 | Columnrm10001wbCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.86.9.4.1.1.9 | Columnrm10001wbCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.86.9.4.1.1.10 | Columnrm10001wbCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.86.9.5 | Noderm10001wbCfgOther | |||
| 1.3.6.1.4.1.20044.86.9.5.1 | Noderm10001wbtablemoduleOther | |||
| 1.3.6.1.4.1.20044.86.9.5.1.2 | Scalarrm10001wbCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.86.9.5.1.3 | Scalarrm10001wbCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.86.9.5.1.4 | Scalarrm10001wbCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.86.9.6 | Noderm10001wbCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.86.9.6.1 | Tablerm10001wbCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.86.9.6.1.1 | Rowrm10001wbCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.86.9.6.1.1.1 | Columnrm10001wbCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.86.9.6.1.1.3 | Columnrm10001wbCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.86.9.6.1.1.4 | Columnrm10001wbCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.86.9.6.1.1.5 | Columnrm10001wbCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.86.9.6.1.1.6 | Columnrm10001wbCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.86.9.6.1.1.7 | Columnrm10001wbCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.86.9.257 | Scalarrm10001wbCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.86.10 | Noderm10001wbtraps | |||
| 1.3.6.1.4.1.20044.86.10.2 | Scalarrm10001wbtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.86.10.3 | Scalarrm10001wbtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.86.10.4 | Scalarrm10001wbtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.86.10.30 | Notificationrm10001wbLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.86.10.31 | Notificationrm10001wbLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.86.10.32 | Notificationrm10001wbLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.86.10.33 | Notificationrm10001wbLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.86.10.34 | Notificationrm10001wbLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.86.10.35 | Notificationrm10001wbLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.86.10.40 | Notificationrm10001wbClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.86.10.41 | Notificationrm10001wbClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.86.10.42 | Notificationrm10001wbClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.86.10.43 | Notificationrm10001wbClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.86.10.44 | Notificationrm10001wbClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.86.10.45 | Notificationrm10001wbClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.86.10.50 | Notificationrm10001wbPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.86.10.51 | Notificationrm10001wbPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.86.11 | Noderm10001wbMonitoring | |||
| 1.3.6.1.4.1.20044.86.11.1 | Noderm10001wbMonOther | |||
| 1.3.6.1.4.1.20044.86.11.1.3 | Noderm10001wbMonRmon | |||
| 1.3.6.1.4.1.20044.86.11.2 | Noderm10001wbMonClient | |||
| 1.3.6.1.4.1.20044.86.11.2.4 | Noderm10001wbMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.86.11.2.4.16 | Tablerm10001wbMonupRmonBytesCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.16.1 | Rowrm10001wbMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.16.1.1 | Columnrm10001wbMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.16.1.2 | Columnrm10001wbMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.86.11.2.4.16.1.3 | Columnrm10001wbMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.16.1.4 | Columnrm10001wbMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.48 | Tablerm10001wbMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.48.1 | Rowrm10001wbMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.48.1.1 | Columnrm10001wbMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.48.1.2 | Columnrm10001wbMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.86.11.2.4.48.1.3 | Columnrm10001wbMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.48.1.4 | Columnrm10001wbMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.80 | Tablerm10001wbMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.80.1 | Rowrm10001wbMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.80.1.1 | Columnrm10001wbMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.80.1.2 | Columnrm10001wbMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.86.11.2.4.80.1.3 | Columnrm10001wbMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.80.1.4 | Columnrm10001wbMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.112 | Tablerm10001wbMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.112.1 | Rowrm10001wbMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.112.1.1 | Columnrm10001wbMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.112.1.2 | Columnrm10001wbMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.86.11.2.4.112.1.3 | Columnrm10001wbMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.112.1.4 | Columnrm10001wbMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.144 | Tablerm10001wbMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.144.1 | Rowrm10001wbMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.144.1.1 | Columnrm10001wbMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.144.1.2 | Columnrm10001wbMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.86.11.2.4.144.1.3 | Columnrm10001wbMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.144.1.4 | Columnrm10001wbMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.176 | Tablerm10001wbMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.176.1 | Rowrm10001wbMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.176.1.1 | Columnrm10001wbMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.176.1.2 | Columnrm10001wbMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.86.11.2.4.176.1.3 | Columnrm10001wbMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.176.1.4 | Columnrm10001wbMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.304 | Tablerm10001wbMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.304.1 | Rowrm10001wbMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.304.1.1 | Columnrm10001wbMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.304.1.2 | Columnrm10001wbMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.86.11.2.4.304.1.3 | Columnrm10001wbMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.304.1.4 | Columnrm10001wbMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.336 | Tablerm10001wbMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of rm10001wbMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.336.1 | Rowrm10001wbMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the rm10001wbMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.336.1.1 | Columnrm10001wbMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the rm10001wbMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.86.11.2.4.336.1.2 | Columnrm10001wbMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.86.11.2.4.336.1.3 | Columnrm10001wbMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.336.1.4 | Columnrm10001wbMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.400 | Tablerm10001wbMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.400.1 | Rowrm10001wbMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.400.1.1 | Columnrm10001wbMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.400.1.2 | Columnrm10001wbMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.86.11.2.4.400.1.3 | Columnrm10001wbMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.400.1.4 | Columnrm10001wbMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.432 | Tablerm10001wbMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.432.1 | Rowrm10001wbMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.432.1.1 | Columnrm10001wbMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.432.1.2 | Columnrm10001wbMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.86.11.2.4.432.1.3 | Columnrm10001wbMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.432.1.4 | Columnrm10001wbMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.464 | Tablerm10001wbMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.464.1 | Rowrm10001wbMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.464.1.1 | Columnrm10001wbMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.464.1.2 | Columnrm10001wbMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.86.11.2.4.464.1.3 | Columnrm10001wbMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.464.1.4 | Columnrm10001wbMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.496 | Tablerm10001wbMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.496.1 | Rowrm10001wbMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.496.1.1 | Columnrm10001wbMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.496.1.2 | Columnrm10001wbMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.86.11.2.4.496.1.3 | Columnrm10001wbMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.496.1.4 | Columnrm10001wbMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.528 | Tablerm10001wbMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.528.1 | Rowrm10001wbMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.528.1.1 | Columnrm10001wbMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.528.1.2 | Columnrm10001wbMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.86.11.2.4.528.1.3 | Columnrm10001wbMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.528.1.4 | Columnrm10001wbMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.560 | Tablerm10001wbMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.560.1 | Rowrm10001wbMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.560.1.1 | Columnrm10001wbMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.560.1.2 | Columnrm10001wbMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.86.11.2.4.560.1.3 | Columnrm10001wbMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.560.1.4 | Columnrm10001wbMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.688 | Tablerm10001wbMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.688.1 | Rowrm10001wbMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.688.1.1 | Columnrm10001wbMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.688.1.2 | Columnrm10001wbMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.86.11.2.4.688.1.3 | Columnrm10001wbMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.688.1.4 | Columnrm10001wbMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.720 | Tablerm10001wbMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of rm10001wbMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.86.11.2.4.720.1 | Rowrm10001wbMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10001wbMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.720.1.1 | Columnrm10001wbMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the rm10001wbMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.86.11.2.4.720.1.2 | Columnrm10001wbMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.86.11.2.4.720.1.3 | Columnrm10001wbMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.86.11.2.4.720.1.4 | Columnrm10001wbMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.86.11.5 | Noderm10001wbMonPerfOther | |||
| 1.3.6.1.4.1.20044.86.11.5.1 | Noderm10001wbMonPerfSync | |||
| 1.3.6.1.4.1.20044.86.11.5.1.257 | Scalarrm10001wbPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.86.11.5.1.259 | Scalarrm10001wbPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.86.11.5.1.260 | Scalarrm10001wbPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.86.11.5.2 | Noderm10001wbMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.86.11.5.2.1 | Scalarrm10001wbPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.86.11.5.2.2 | Scalarrm10001wbPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.86.11.5.2.5 | Scalarrm10001wbPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.86.11.5.2.6 | Scalarrm10001wbPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.86.11.5.2.7 | Scalarrm10001wbPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.86.11.5.2.8 | Scalarrm10001wbPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.86.11.6 | Noderm10001wbMonPerfClient | |||
| 1.3.6.1.4.1.20044.86.11.6.16 | Tablerm10001wbPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of rm10001wbPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.86.11.6.16.1 | Rowrm10001wbPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.6.16.1.1 | Columnrm10001wbPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.6.16.1.2 | Columnrm10001wbPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.16.1.3 | Columnrm10001wbPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.16.1.4 | Columnrm10001wbPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.16.1.5 | Columnrm10001wbPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.16.1.6 | Columnrm10001wbPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.16.1.7 | Columnrm10001wbPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.16.1.8 | Columnrm10001wbPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.16.1.9 | Columnrm10001wbPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.16.1.10 | Columnrm10001wbPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.16.1.11 | Columnrm10001wbPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.48 | Tablerm10001wbPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.6.48.1 | Rowrm10001wbPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.48.1.1 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.48.1.2 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.48.1.3 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.48.1.4 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.48.1.5 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.48.1.6 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.48.1.7 | Columnrm10001wbPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.48.1.8 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.48.1.9 | Columnrm10001wbPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.48.1.10 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.48.1.11 | Columnrm10001wbPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.80 | Tablerm10001wbPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of rm10001wbPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.86.11.6.80.1 | Rowrm10001wbPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.6.80.1.1 | Columnrm10001wbPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.6.80.1.2 | Columnrm10001wbPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.80.1.3 | Columnrm10001wbPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.80.1.4 | Columnrm10001wbPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.80.1.5 | Columnrm10001wbPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.80.1.6 | Columnrm10001wbPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.80.1.7 | Columnrm10001wbPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.80.1.8 | Columnrm10001wbPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.80.1.9 | Columnrm10001wbPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.80.1.10 | Columnrm10001wbPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.80.1.11 | Columnrm10001wbPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.112 | Tablerm10001wbPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.6.112.1 | Rowrm10001wbPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.112.1.1 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.112.1.2 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.112.1.3 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.112.1.4 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.112.1.5 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.112.1.6 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.112.1.7 | Columnrm10001wbPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.112.1.8 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.112.1.9 | Columnrm10001wbPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.112.1.10 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.112.1.11 | Columnrm10001wbPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.144 | Tablerm10001wbPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of rm10001wbPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.86.11.6.144.1 | Rowrm10001wbPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.6.144.1.1 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.6.144.1.2 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.144.1.3 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.144.1.4 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.144.1.5 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.144.1.6 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.144.1.7 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.144.1.8 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.144.1.9 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.144.1.10 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.144.1.11 | Columnrm10001wbPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.176 | Tablerm10001wbPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.6.176.1 | Rowrm10001wbPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.176.1.1 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.176.1.2 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.176.1.3 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.176.1.4 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.176.1.5 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.176.1.6 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.176.1.7 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.176.1.8 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.176.1.9 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.176.1.10 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.176.1.11 | Columnrm10001wbPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.208 | Tablerm10001wbPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of rm10001wbPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.86.11.6.208.1 | Rowrm10001wbPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.6.208.1.1 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.6.208.1.2 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.208.1.3 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.208.1.4 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.208.1.5 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.208.1.6 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.208.1.7 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.208.1.8 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.208.1.9 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.208.1.10 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.208.1.11 | Columnrm10001wbPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.240 | Tablerm10001wbPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.6.240.1 | Rowrm10001wbPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.240.1.1 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.240.1.2 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.240.1.3 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.6.240.1.4 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.240.1.5 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.240.1.6 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.240.1.7 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.240.1.8 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.240.1.9 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.240.1.10 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.240.1.11 | Columnrm10001wbPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.6.848 | Tablerm10001wbPerfDatacomClientCurrent15StatTable | not-accessible | current | List of rm10001wbPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.86.11.6.848.1 | Rowrm10001wbPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10001wbPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.6.848.1.1 | Columnrm10001wbPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the rm10001wbPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.6.848.1.4 | Columnrm10001wbperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.848.1.5 | Columnrm10001wbperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.848.1.6 | Columnrm10001wbperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.848.1.7 | Columnrm10001wbperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.86.11.6.848.1.28 | Columnrm10001wbperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.848.1.29 | Columnrm10001wbperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.848.1.30 | Columnrm10001wbperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.848.1.31 | Columnrm10001wbperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.86.11.6.880 | Tablerm10001wbPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.6.880.1 | Rowrm10001wbPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.880.1.1 | Columnrm10001wbPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.880.1.4 | Columnrm10001wbperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.880.1.5 | Columnrm10001wbperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.880.1.6 | Columnrm10001wbperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.880.1.7 | Columnrm10001wbperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.86.11.6.880.1.28 | Columnrm10001wbperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.880.1.29 | Columnrm10001wbperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.880.1.30 | Columnrm10001wbperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.880.1.31 | Columnrm10001wbperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.86.11.6.912 | Tablerm10001wbPerfDatacomClientCurrent24StatTable | not-accessible | current | List of rm10001wbPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.86.11.6.912.1 | Rowrm10001wbPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10001wbPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.6.912.1.1 | Columnrm10001wbPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the rm10001wbPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.6.912.1.4 | Columnrm10001wbperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.912.1.5 | Columnrm10001wbperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.912.1.6 | Columnrm10001wbperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.912.1.7 | Columnrm10001wbperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.86.11.6.912.1.28 | Columnrm10001wbperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.912.1.29 | Columnrm10001wbperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.912.1.30 | Columnrm10001wbperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.912.1.31 | Columnrm10001wbperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.86.11.6.944 | Tablerm10001wbPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.6.944.1 | Rowrm10001wbPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.944.1.1 | Columnrm10001wbPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.6.944.1.4 | Columnrm10001wbperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.944.1.5 | Columnrm10001wbperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.944.1.6 | Columnrm10001wbperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.944.1.7 | Columnrm10001wbperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.86.11.6.944.1.28 | Columnrm10001wbperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.944.1.29 | Columnrm10001wbperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.86.11.6.944.1.30 | Columnrm10001wbperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.86.11.6.944.1.31 | Columnrm10001wbperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.86.11.7 | Noderm10001wbMonPerfLine | |||
| 1.3.6.1.4.1.20044.86.11.7.336 | Tablerm10001wbPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of rm10001wbPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.86.11.7.336.1 | Rowrm10001wbPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.7.336.1.1 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.7.336.1.2 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.336.1.3 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.336.1.4 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.336.1.5 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.336.1.6 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.336.1.7 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.336.1.8 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.336.1.9 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.336.1.10 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.336.1.11 | Columnrm10001wbPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.337 | Tablerm10001wbPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.7.337.1 | Rowrm10001wbPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.337.1.1 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.337.1.2 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.337.1.3 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.337.1.4 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.337.1.5 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.337.1.6 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.337.1.7 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.337.1.8 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.337.1.9 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.337.1.10 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.337.1.11 | Columnrm10001wbPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.338 | Tablerm10001wbPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of rm10001wbPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.86.11.7.338.1 | Rowrm10001wbPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.7.338.1.1 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.7.338.1.2 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.338.1.3 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.338.1.4 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.338.1.5 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.338.1.6 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.338.1.7 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.338.1.8 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.338.1.9 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.338.1.10 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.338.1.11 | Columnrm10001wbPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.339 | Tablerm10001wbPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.7.339.1 | Rowrm10001wbPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.339.1.1 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.339.1.2 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.339.1.3 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.339.1.4 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.339.1.5 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.339.1.6 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.339.1.7 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.339.1.8 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.339.1.9 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.339.1.10 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.339.1.11 | Columnrm10001wbPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.352 | Tablerm10001wbPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of rm10001wbPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.86.11.7.352.1 | Rowrm10001wbPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.7.352.1.1 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.86.11.7.352.1.2 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.352.1.3 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.352.1.4 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.352.1.5 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.352.1.6 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.352.1.7 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.353 | Tablerm10001wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.7.353.1 | Rowrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.353.1.1 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.353.1.2 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.353.1.3 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.353.1.4 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.353.1.5 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.353.1.6 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.353.1.7 | Columnrm10001wbPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.354 | Tablerm10001wbPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of rm10001wbPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.86.11.7.354.1 | Rowrm10001wbPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the rm10001wbPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.7.354.1.1 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the rm10001wbPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.86.11.7.354.1.2 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.354.1.3 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.354.1.4 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.354.1.5 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.354.1.6 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.354.1.7 | Columnrm10001wbPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.355 | Tablerm10001wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of rm10001wbPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.86.11.7.355.1 | Rowrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10001wbPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.355.1.1 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10001wbPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.86.11.7.355.1.2 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.355.1.3 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.86.11.7.355.1.4 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.355.1.5 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.86.11.7.355.1.6 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.86.11.7.355.1.7 | Columnrm10001wbPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Rm10001wbAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Rm10001wbClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Rm10001wbDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Rm10001wbMultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Rm10001wbOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Rm10001wbOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Rm10001wbOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Rm10001wbOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Rm10001wbProtocolMode | INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } | current | Different values on the protocol mode |