EKINOPS-Rm10010-MIB
1021 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.53 | IdentitymoduleRm10010 | Creation. | ||
| 1.3.6.1.4.1.20044.53.2 | Noderm10010alarms | |||
| 1.3.6.1.4.1.20044.53.2.1 | Noderm10010AlmOther | |||
| 1.3.6.1.4.1.20044.53.2.1.1 | Noderm10010AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.53.2.1.1.2 | Noderm10010AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.53.2.1.1.2.1 | Scalarrm10010AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.53.2.1.1.2.2 | Scalarrm10010AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.53.2.1.1.2.3 | Scalarrm10010AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.53.2.1.1.2.4 | Scalarrm10010AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.53.2.1.1.2.5 | Scalarrm10010AlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.53.2.1.2 | Noderm10010AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.53.2.1.2.248 | Noderm10010AlmmodFanFail | |||
| 1.3.6.1.4.1.20044.53.2.1.2.248.1 | Scalarrm10010AlmFanModuleAbsent | read-only | current | Fan Module Absent :This OID indicates the presence of the FAN module in the Chassis. <Help> This alarm indicates if the FAN module is detected in the chassis. … |
| 1.3.6.1.4.1.20044.53.2.1.2.248.2 | Scalarrm10010AlmFansFail | read-only | current | Fan Module Failure :This OID indicates that at least one of the 4 FAN unit of the FAN module is in fail condition <Help> This alarm indicates if one the FANs i… |
| 1.3.6.1.4.1.20044.53.2.1.2.248.4 | Scalarrm10010AlmFan1Fail | read-only | current | Fan Unit N�1 Failed On Fan Module :This OID indicates a failure on fan 1. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.53.2.1.2.248.5 | Scalarrm10010AlmFan2Fail | read-only | current | Fan Unit N�2 Failed On Fan Module :This OID indicates a failure on fan 2. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.53.2.1.2.248.6 | Scalarrm10010AlmFan3Fail | read-only | current | Fan Unit N�3 Failed On Fan Module :This OID indicates a failure on fan 3. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.53.2.1.2.248.7 | Scalarrm10010AlmFan4Fail | read-only | current | Fan Unit N�4 Failed On Fan Module :This OID indicates a failure on fan 4. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.53.2.1.3 | Noderm10010AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.53.2.1.3.0 | Noderm10010AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.53.2.1.3.0.2 | Scalarrm10010AlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.53.2.1.3.0.9 | Scalarrm10010AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.53.2.1.3.0.15 | Scalarrm10010AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.53.2.1.3.0.16 | Scalarrm10010AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.53.2.1.3.40 | Noderm10010AlmclientModuleState | |||
| 1.3.6.1.4.1.20044.53.2.1.3.40.1 | Scalarrm10010AlmCfpInitialize | read-only | current | Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress <Help> Status indicating the Client Trscv initialization is in progr… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.2 | Scalarrm10010AlmCfpLowPower | read-only | current | Client Trscv Low Power :This OID indicates the Client Trscv is in low power state <Help> Status indicating the Client Trscv is in low power state <Condtype> CF… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.3 | Scalarrm10010AlmCfpHighPowerUp | read-only | current | Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state <Help> Status indicating the Client Trscv is leaving Low Power state… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.4 | Scalarrm10010AlmCfpTxOff | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF <Help> Status indicating the Client Trscv Laser is OFF <Condtype> CFP_TX_OFF <Pro… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.5 | Scalarrm10010AlmCfpTxTurnOn | read-only | current | Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser <Help> Status indicating the Client Trscv is turning on its laser <Cond… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.6 | Scalarrm10010AlmCfpReady | read-only | current | Client Trscv Ready :This OID indicates the Client Trscv is ready to operate <Help> Status indicating the Client Trscv is ready to operate <Condtype> CFP_READY … |
| 1.3.6.1.4.1.20044.53.2.1.3.40.7 | Scalarrm10010AlmCfpFault | read-only | current | Client Trscv Fault :This OID indicates the Client Trscv is in Fault state <Help> Status indicating the Client Trscv is in Fault state <Condtype> CFP_FAULT <Pro… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.8 | Scalarrm10010AlmCfpTxTurnOff | read-only | current | Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser <Help> Status indicating the Client Trscv is turning off its laser <C… |
| 1.3.6.1.4.1.20044.53.2.1.3.40.9 | Scalarrm10010AlmCfpHighPowerDown | read-only | current | Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state <Help> Status indicating the Client Trscv is entering Low Power s… |
| 1.3.6.1.4.1.20044.53.2.1.3.41 | Noderm10010AlmclientModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.53.2.1.3.41.4 | Scalarrm10010AlmCfpOutOfAlignment | read-only | current | Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Cli… |
| 1.3.6.1.4.1.20044.53.2.1.3.41.5 | Scalarrm10010AlmCfpRxNetworkLol | read-only | current | Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface <Help> Alarm indicating of Loss of … |
| 1.3.6.1.4.1.20044.53.2.1.3.41.6 | Scalarrm10010AlmCfpRxLos | read-only | current | Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.53.2.1.3.41.7 | Scalarrm10010AlmCfpTxHostLol | read-only | current | Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock… |
| 1.3.6.1.4.1.20044.53.2.1.3.41.8 | Scalarrm10010AlmCfpTxLosf | read-only | current | Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv <Help> Alarm indicating a Loss of … |
| 1.3.6.1.4.1.20044.53.2.1.3.41.9 | Scalarrm10010AlmCfpTxCmuLol | read-only | current | Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv <Help> Alarm indicating a Clock Multipli… |
| 1.3.6.1.4.1.20044.53.2.1.3.41.10 | Scalarrm10010AlmCfpTxJitterPllLol | read-only | current | Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv <Help> Alarm indicating a Tx Jitter PLL… |
| 1.3.6.1.4.1.20044.53.2.1.3.41.11 | Scalarrm10010AlmCfpLossOfRefclk | read-only | current | Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv <Help> Alarm indicating a Loss of Reference clock … |
| 1.3.6.1.4.1.20044.53.2.1.3.41.14 | Scalarrm10010AlmCfpHwInterlock | read-only | current | Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity <Help> Alarm indicating the Client Trscv power i… |
| 1.3.6.1.4.1.20044.53.2.1.3.42 | Noderm10010AlmclientGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.53.2.1.3.42.1 | Scalarrm10010AlmCfpSoftGlobAlarmTest | read-only | current | Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose <Help> Status indicating … |
| 1.3.6.1.4.1.20044.53.2.1.3.42.7 | Scalarrm10010AlmCfpNetworkLaneAlarmWarning2 | read-only | current | Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.8 | Scalarrm10010AlmCfpModuleState | read-only | current | Client Trscv Module State :This OID indicates the Client Trscv module state <Help> Synthesis alarm indicating the Client Trscv module state <Condtype> CFP_MODU… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.9 | Scalarrm10010AlmCfpModuleGeneralStatus | read-only | current | Client Trscv General Status :This OID indicates the Client Trscv module general status <Help> Synthesis alarm indicating the Client Trscv module general status… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.10 | Scalarrm10010AlmCfpModuleFault | read-only | current | Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module <Help> Synthesis alarm indicating at least one Fault is… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.11 | Scalarrm10010AlmCfpModuleAlarmWarning1 | read-only | current | Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module <Help> Synthesis alarm indicating … |
| 1.3.6.1.4.1.20044.53.2.1.3.42.12 | Scalarrm10010AlmCfpModuleAlarmWarning2 | read-only | current | Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module <Help> Synthesis alarm indicating at least … |
| 1.3.6.1.4.1.20044.53.2.1.3.42.13 | Scalarrm10010AlmCfpNetworkLaneAlarmWarning1 | read-only | current | Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.14 | Scalarrm10010AlmCfpNetworkLaneFaultStatus | read-only | current | Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface <Help> Synthesis alarm… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.15 | Scalarrm10010AlmCfpHostLaneFaultStatus | read-only | current | Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface <Help> Synthesis alarm indic… |
| 1.3.6.1.4.1.20044.53.2.1.3.42.16 | Scalarrm10010AlmCfpGlobAlarmAssertion | read-only | current | Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module <Help> Synthesis alarm indicating at least on… |
| 1.3.6.1.4.1.20044.53.2.1.3.46 | Noderm10010AlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.53.2.1.3.46.1 | Scalarrm10010AlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.2 | Scalarrm10010AlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.3 | Scalarrm10010AlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.4 | Scalarrm10010AlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.5 | Scalarrm10010AlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.53.2.1.3.46.6 | Scalarrm10010AlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.7 | Scalarrm10010AlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.8 | Scalarrm10010AlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.53.2.1.3.46.9 | Scalarrm10010AlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.53.2.1.3.47 | Noderm10010AlmmsaModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.53.2.1.3.47.4 | Scalarrm10010AlmMsaOutOfAlignment | read-only | current | Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Line Tr… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.5 | Scalarrm10010AlmMsaRxNetworkLol | read-only | current | Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface <Help> Alarm indicating of Loss of Lo… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.6 | Scalarrm10010AlmMsaRxLos | read-only | current | Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.7 | Scalarrm10010AlmMsaTxHostLol | read-only | current | Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock is … |
| 1.3.6.1.4.1.20044.53.2.1.3.47.8 | Scalarrm10010AlmMsaTxLosf | read-only | current | Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv <Help> Alarm indicating a Loss of Sign… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.9 | Scalarrm10010AlmMsaTxCmuLol | read-only | current | Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Clock Multiplier U… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.10 | Scalarrm10010AlmMsaTxJitterPllLol | read-only | current | Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Tx Jitter PLL Lo… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.11 | Scalarrm10010AlmMsaLossOfRefclk | read-only | current | Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv <Help> Alarm indicating a Loss of Reference clock is d… |
| 1.3.6.1.4.1.20044.53.2.1.3.47.14 | Scalarrm10010AlmMsaHwInterlock | read-only | current | Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity <Help> Alarm indicating the Line Trscv power is high… |
| 1.3.6.1.4.1.20044.53.2.1.3.48 | Noderm10010AlmmsaGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.53.2.1.3.48.1 | Scalarrm10010AlmMsaSoftGlobAlarmTest | read-only | current | Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose <Help> Status indicating the … |
| 1.3.6.1.4.1.20044.53.2.1.3.48.6 | Scalarrm10010AlmMsaNetworkHostAlarmStatus | read-only | current | Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv <Help> Synthesis alarm indicating the al… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.7 | Scalarrm10010AlmMsaNetworkLaneAlarmWarning2 | read-only | current | Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.8 | Scalarrm10010AlmMsaModuleState | read-only | current | Line Trscv Module State :This OID indicates the Line Trscv module state <Help> Synthesis alarm indicating the Line Trscv module state <Condtype> MSA_MODULE_STA… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.9 | Scalarrm10010AlmMsaModuleGeneralStatus | read-only | current | Line Trscv General Status :This OID indicates the Line Trscv module general <Help> Synthesis alarm indicating the Line Trscv module general status <Condtype> M… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.10 | Scalarrm10010AlmModuleFault | read-only | current | Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Fault is det… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.11 | Scalarrm10010AlmMsaModuleAlarmWarning1 | read-only | current | Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.53.2.1.3.48.12 | Scalarrm10010AlmMsaModuleAlarmWarning2 | read-only | current | Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.53.2.1.3.48.13 | Scalarrm10010AlmMsaNetworkLaneAlarmWarning1 | read-only | current | Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface <Help> Synthesis alarm indicating a… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.14 | Scalarrm10010AlmMsaNetworkLaneFaultStatus | read-only | current | Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.15 | Scalarrm10010AlmMsaHostLaneFaultStatus | read-only | current | Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface <Help> Synthesis alarm indicatin… |
| 1.3.6.1.4.1.20044.53.2.1.3.48.16 | Scalarrm10010AlmMsaGlobAlarmAssertion | read-only | current | Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Al… |
| 1.3.6.1.4.1.20044.53.2.1.3.49 | Noderm10010AlmmsaNetworkTxAlignment | |||
| 1.3.6.1.4.1.20044.53.2.1.3.49.12 | Scalarrm10010AlmNetTxTimingFault | read-only | current | Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx Timing Fa… |
| 1.3.6.1.4.1.20044.53.2.1.3.49.13 | Scalarrm10010AlmNetTxReferenceClockFault | read-only | current | Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a … |
| 1.3.6.1.4.1.20044.53.2.1.3.49.14 | Scalarrm10010AlmNetTxCmuLockFault | read-only | current | Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.53.2.1.3.49.15 | Scalarrm10010AlmNetTxOutOfAlignment | read-only | current | Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx O… |
| 1.3.6.1.4.1.20044.53.2.1.3.49.16 | Scalarrm10010AlmNetTxLossOfAlignment | read-only | current | Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.53.2.1.3.50 | Noderm10010AlmmsaNetworkRxAlignment | |||
| 1.3.6.1.4.1.20044.53.2.1.3.50.12 | Scalarrm10010AlmNetRxTimingFault | read-only | current | Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx Timing Fa… |
| 1.3.6.1.4.1.20044.53.2.1.3.50.13 | Scalarrm10010AlmNetRxOutOfAlignment | read-only | current | Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx O… |
| 1.3.6.1.4.1.20044.53.2.1.3.50.14 | Scalarrm10010AlmNetRxLossOfAlignment | read-only | current | Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.53.2.1.3.50.15 | Scalarrm10010AlmNetRxModemLockFault | read-only | current | Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx M… |
| 1.3.6.1.4.1.20044.53.2.1.3.50.16 | Scalarrm10010AlmNetRxModemSyncDetectFault | read-only | current | Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface <H… |
| 1.3.6.1.4.1.20044.53.2.1.3.51 | Noderm10010AlmmsaNetworkHostNetworkAlarmSummary | |||
| 1.3.6.1.4.1.20044.53.2.1.3.51.11 | Scalarrm10010AlmNetworkTxAlignment | read-only | current | Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.53.2.1.3.51.12 | Scalarrm10010AlmNetworkRxAlignment | read-only | current | Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.53.2.1.3.51.13 | Scalarrm10010AlmNetworkRxOtn | read-only | current | Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx OTN Fault i… |
| 1.3.6.1.4.1.20044.53.2.1.3.51.14 | Scalarrm10010AlmHostRxAlignment | read-only | current | Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Rx Align… |
| 1.3.6.1.4.1.20044.53.2.1.3.51.15 | Scalarrm10010AlmHostTxAlignment | read-only | current | Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx Align… |
| 1.3.6.1.4.1.20044.53.2.1.3.51.16 | Scalarrm10010AlmHostTxOtnStatus | read-only | current | Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx OTN Fault is dete… |
| 1.3.6.1.4.1.20044.53.2.1.3.52 | Noderm10010AlmmsaHostTxAlignment | |||
| 1.3.6.1.4.1.20044.53.2.1.3.52.13 | Scalarrm10010AlmHostTxDeskewLockFault | read-only | current | Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Deske… |
| 1.3.6.1.4.1.20044.53.2.1.3.52.14 | Scalarrm10010AlmHostTxOutOfAlignment | read-only | current | Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Out of … |
| 1.3.6.1.4.1.20044.53.2.1.3.52.15 | Scalarrm10010AlmHostTxLossOfAlignment | read-only | current | Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Loss … |
| 1.3.6.1.4.1.20044.53.2.1.3.52.16 | Scalarrm10010AlmHostTxCdrLockFault | read-only | current | Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.53.2.1.3.53 | Noderm10010AlmmsaHostRxAlignment | |||
| 1.3.6.1.4.1.20044.53.2.1.3.53.14 | Scalarrm10010AlmHostRxCmuLockFault | read-only | current | Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.53.2.1.3.53.15 | Scalarrm10010AlmHostRxOutOfAlignment | read-only | current | Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Out of … |
| 1.3.6.1.4.1.20044.53.2.1.3.53.16 | Scalarrm10010AlmHostRxLossOfAlignment | read-only | current | Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Loss … |
| 1.3.6.1.4.1.20044.53.2.2 | Noderm10010AlmClient | |||
| 1.3.6.1.4.1.20044.53.2.2.1 | Noderm10010AlmClientNurg | |||
| 1.3.6.1.4.1.20044.53.2.2.1.56 | Tablerm10010AlmclientNetworkLaneAlarmWarningTable | not-accessible | current | List of rm10010AlmclientNetworkLaneAlarmWarning Article |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1 | Rowrm10010AlmclientNetworkLaneAlarmWarningEntry | not-accessible | current | Row definition for the rm10010AlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.1 | Columnrm10010AlmclientNetworkLaneAlarmWarningIndex | read-only | current | Index definition for the rm10010AlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.2 | Columnrm10010AlmClientRxPowerLowAlarmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.3 | Columnrm10010AlmClientRxPowerLowWarningPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.4 | Columnrm10010AlmClientRxPowerHighWarningPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.5 | Columnrm10010AlmClientRxPowerHighAlarmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.6 | Columnrm10010AlmLaserTempLowAlarmPortn | read-only | current | Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Ala… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.7 | Columnrm10010AlmClientLaserTempLowWarningPortn | read-only | current | Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> W… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.8 | Columnrm10010AlmClientLaserTempHighWarningPortn | read-only | current | Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.9 | Columnrm10010AlmClientLaserTempHighAlarmPortn | read-only | current | Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> A… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.10 | Columnrm10010AlmClientTxPowerLowAlarmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.11 | Columnrm10010AlmClientTxPowerLowWarningPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.12 | Columnrm10010AlmClientTxPowerHighWarningPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.13 | Columnrm10010AlmClientTxPowerHighAlarmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.14 | Columnrm10010AlmClientBiasLowAlarmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.15 | Columnrm10010AlmClientBiasLowWarningPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.16 | Columnrm10010AlmClientBiasHighWarningPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.53.2.2.1.56.1.17 | Columnrm10010AlmClientBiasHighAlarmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.53.2.2.1.232 | Tablerm10010AlmclientSfpWarnDdmTable | not-accessible | current | List of rm10010AlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1 | Rowrm10010AlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the rm10010AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.1 | Columnrm10010AlmclientSfpWarnDdmIndex | read-only | current | Index definition for the rm10010AlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.2 | Columnrm10010AlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.3 | Columnrm10010AlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.4 | Columnrm10010AlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.5 | Columnrm10010AlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.6 | Columnrm10010AlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.7 | Columnrm10010AlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.8 | Columnrm10010AlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.9 | Columnrm10010AlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.16 | Columnrm10010AlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.53.2.2.1.232.1.17 | Columnrm10010AlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.53.2.2.2 | Noderm10010AlmClientUrg | |||
| 1.3.6.1.4.1.20044.53.2.2.2.72 | Tablerm10010AlmclientNetworkLaneFaultTable | not-accessible | current | List of rm10010AlmclientNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1 | Rowrm10010AlmclientNetworkLaneFaultEntry | not-accessible | current | Row definition for the rm10010AlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.1 | Columnrm10010AlmclientNetworkLaneFaultIndex | read-only | current | Index definition for the rm10010AlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.4 | Columnrm10010AlmClientLaneRxFifoErrorPortn | read-only | current | Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Tr… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.5 | Columnrm10010AlmClientLaneRxLolPortn | read-only | current | Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.6 | Columnrm10010AlmClientLaneRxLosPortn | read-only | current | Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on t… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.8 | Columnrm10010AlmClientLaneTxLolPortn | read-only | current | Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.9 | Columnrm10010AlmClientLaneTxLosfPortn | read-only | current | Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.15 | Columnrm10010AlmClientLaneApdPowerSupplyPortn | read-only | current | Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supp… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.16 | Columnrm10010AlmClientLaneWavelengthUnlockedPortn | read-only | current | Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on t… |
| 1.3.6.1.4.1.20044.53.2.2.2.72.1.17 | Columnrm10010AlmClientLaneTecFaultPortn | read-only | current | Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network … |
| 1.3.6.1.4.1.20044.53.2.2.2.88 | Tablerm10010AlmclientHostLaneFaultTable | not-accessible | current | List of rm10010AlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1 | Rowrm10010AlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the rm10010AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.1 | Columnrm10010AlmclientHostLaneFaultIndex | read-only | current | Index definition for the rm10010AlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.2 | Columnrm10010AlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.3 | Columnrm10010AlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.4 | Columnrm10010AlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.5 | Columnrm10010AlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.6 | Columnrm10010AlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.7 | Columnrm10010AlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.10 | Columnrm10010AlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.53.2.2.2.88.1.11 | Columnrm10010AlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.53.2.2.2.216 | Tablerm10010AlmclientSfpAlmDdmTable | not-accessible | current | List of rm10010AlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1 | Rowrm10010AlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the rm10010AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.1 | Columnrm10010AlmclientSfpAlmDdmIndex | read-only | current | Index definition for the rm10010AlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.2 | Columnrm10010AlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.3 | Columnrm10010AlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.4 | Columnrm10010AlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.5 | Columnrm10010AlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.6 | Columnrm10010AlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.7 | Columnrm10010AlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.8 | Columnrm10010AlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.9 | Columnrm10010AlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.16 | Columnrm10010AlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.53.2.2.2.216.1.17 | Columnrm10010AlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.53.2.2.3 | Noderm10010AlmClientCrit | |||
| 1.3.6.1.4.1.20044.53.2.2.3.8 | Tablerm10010AlmsynthAlmPortTable | not-accessible | current | List of rm10010AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1 | Rowrm10010AlmsynthAlmPortEntry | not-accessible | current | Row definition for the rm10010AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.1 | Columnrm10010AlmsynthAlmPortIndex | read-only | current | Index definition for the rm10010AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.2 | Columnrm10010AlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.3 | Columnrm10010AlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.5 | Columnrm10010AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.6 | Columnrm10010AlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.7 | Columnrm10010AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.8 | Columnrm10010AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.9 | Columnrm10010AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.10 | Columnrm10010AlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.11 | Columnrm10010AlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.13 | Columnrm10010AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.53.2.2.3.8.1.17 | Columnrm10010AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.53.2.3 | Noderm10010AlmLine | |||
| 1.3.6.1.4.1.20044.53.2.3.1 | Noderm10010AlmLineNurg | |||
| 1.3.6.1.4.1.20044.53.2.3.1.104 | Tablerm10010AlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of rm10010AlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1 | Rowrm10010AlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the rm10010AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.1 | Columnrm10010AlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the rm10010AlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.2 | Columnrm10010AlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.3 | Columnrm10010AlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.4 | Columnrm10010AlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.5 | Columnrm10010AlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.6 | Columnrm10010AlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.7 | Columnrm10010AlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.8 | Columnrm10010AlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.9 | Columnrm10010AlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.10 | Columnrm10010AlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.11 | Columnrm10010AlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.12 | Columnrm10010AlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.13 | Columnrm10010AlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.14 | Columnrm10010AlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.15 | Columnrm10010AlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.16 | Columnrm10010AlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.53.2.3.1.104.1.17 | Columnrm10010AlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.53.2.3.1.120 | Tablerm10010AlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of rm10010AlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1 | Rowrm10010AlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the rm10010AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.1 | Columnrm10010AlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the rm10010AlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.2 | Columnrm10010AlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.3 | Columnrm10010AlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.4 | Columnrm10010AlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.5 | Columnrm10010AlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.6 | Columnrm10010AlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.7 | Columnrm10010AlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.8 | Columnrm10010AlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.9 | Columnrm10010AlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.10 | Columnrm10010AlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.11 | Columnrm10010AlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.12 | Columnrm10010AlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.13 | Columnrm10010AlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.14 | Columnrm10010AlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.15 | Columnrm10010AlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.16 | Columnrm10010AlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.53.2.3.1.120.1.17 | Columnrm10010AlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.53.2.3.2 | Noderm10010AlmLineUrg | |||
| 1.3.6.1.4.1.20044.53.2.3.2.136 | Tablerm10010AlmlineNetworkLaneFaultTable | not-accessible | current | List of rm10010AlmlineNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1 | Rowrm10010AlmlineNetworkLaneFaultEntry | not-accessible | current | Row definition for the rm10010AlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.1 | Columnrm10010AlmlineNetworkLaneFaultIndex | read-only | current | Index definition for the rm10010AlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.3 | Columnrm10010AlmLineLaneRxTecFaultPortn | read-only | current | Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Netwo… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.4 | Columnrm10010AlmLineLaneRxFifoErrorPortn | read-only | current | Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Ne… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.5 | Columnrm10010AlmLineLaneRxLolPortn | read-only | current | Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.6 | Columnrm10010AlmLineLaneRxLosPortn | read-only | current | Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the L… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.8 | Columnrm10010AlmLineLaneTxLolPortn | read-only | current | Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.9 | Columnrm10010AlmLineLaneTxLosfPortn | read-only | current | Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.15 | Columnrm10010AlmLineLaneApdPowerSupplyPortn | read-only | current | Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply f… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.16 | Columnrm10010AlmLineLaneWavelengthUnlockedPortn | read-only | current | Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the L… |
| 1.3.6.1.4.1.20044.53.2.3.2.136.1.17 | Columnrm10010AlmLineLaneTecFaultPortn | read-only | current | Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network … |
| 1.3.6.1.4.1.20044.53.2.3.2.152 | Tablerm10010AlmlineHostLaneFaultTable | not-accessible | current | List of rm10010AlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1 | Rowrm10010AlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the rm10010AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.1 | Columnrm10010AlmlineHostLaneFaultIndex | read-only | current | Index definition for the rm10010AlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.2 | Columnrm10010AlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.3 | Columnrm10010AlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.4 | Columnrm10010AlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.5 | Columnrm10010AlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.6 | Columnrm10010AlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.7 | Columnrm10010AlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.10 | Columnrm10010AlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.53.2.3.2.152.1.11 | Columnrm10010AlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.53.2.3.2.168 | Tablerm10010AlmlineNetworkLaneRxOtnTable | not-accessible | current | List of rm10010AlmlineNetworkLaneRxOtn Article |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1 | Rowrm10010AlmlineNetworkLaneRxOtnEntry | not-accessible | current | Row definition for the rm10010AlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.1 | Columnrm10010AlmlineNetworkLaneRxOtnIndex | read-only | current | Index definition for the rm10010AlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.10 | Columnrm10010AlmLineRxOtnOduAisPortn | read-only | current | Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.11 | Columnrm10010AlmLineRxOtnOtuAisPortn | read-only | current | Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.12 | Columnrm10010AlmLineRxSmBdiPortn | read-only | current | Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.13 | Columnrm10010AlmLineRxOtnIaePortn | read-only | current | Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incomi… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.14 | Columnrm10010AlmLineRxOtnOomPortn | read-only | current | Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multif… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.15 | Columnrm10010AlmLineRxOtnLomPortn | read-only | current | Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multif… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.16 | Columnrm10010AlmLineRxOtnOofPortn | read-only | current | Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is de… |
| 1.3.6.1.4.1.20044.53.2.3.2.168.1.17 | Columnrm10010AlmLineRxOtnLofPortn | read-only | current | Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is de… |
| 1.3.6.1.4.1.20044.53.2.3.2.184 | Tablerm10010AlmlineHostLaneTxOtnTable | not-accessible | current | List of rm10010AlmlineHostLaneTxOtn Article |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1 | Rowrm10010AlmlineHostLaneTxOtnEntry | not-accessible | current | Row definition for the rm10010AlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.1 | Columnrm10010AlmlineHostLaneTxOtnIndex | read-only | current | Index definition for the rm10010AlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.10 | Columnrm10010AlmLineTxOtnOduAisPortn | read-only | current | Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OD… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.11 | Columnrm10010AlmLineTxOtnOtuAisPortn | read-only | current | Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OT… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.12 | Columnrm10010AlmLineTxSmBdiPortn | read-only | current | Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM B… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.13 | Columnrm10010AlmLineTxOtnIaePortn | read-only | current | Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Ali… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.14 | Columnrm10010AlmLineTxOtnOomPortn | read-only | current | Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe i… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.15 | Columnrm10010AlmLineTxOtnLomPortn | read-only | current | Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe i… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.16 | Columnrm10010AlmLineTxOtnOofPortn | read-only | current | Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected… |
| 1.3.6.1.4.1.20044.53.2.3.2.184.1.17 | Columnrm10010AlmLineTxOtnLofPortn | read-only | current | Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected… |
| 1.3.6.1.4.1.20044.53.2.3.3 | Noderm10010AlmLineCrit | |||
| 1.3.6.1.4.1.20044.53.2.3.3.24 | Tablerm10010AlmsynthAlmLineTable | not-accessible | current | List of rm10010AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1 | Rowrm10010AlmsynthAlmLineEntry | not-accessible | current | Row definition for the rm10010AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.1 | Columnrm10010AlmsynthAlmLineIndex | read-only | current | Index definition for the rm10010AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.2 | Columnrm10010AlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.3 | Columnrm10010AlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.5 | Columnrm10010AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.6 | Columnrm10010AlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.7 | Columnrm10010AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.9 | Columnrm10010AlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.10 | Columnrm10010AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.11 | Columnrm10010AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.13 | Columnrm10010AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.53.2.3.3.24.1.17 | Columnrm10010AlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.53.3 | Noderm10010measures | |||
| 1.3.6.1.4.1.20044.53.3.1 | Noderm10010MesrOther | |||
| 1.3.6.1.4.1.20044.53.3.1.0 | Scalarrm10010Mesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.53.3.1.1 | Scalarrm10010Mesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.53.3.1.7 | Scalarrm10010MesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.53.3.1.180 | Scalarrm10010MesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.53.3.1.181 | Scalarrm10010MesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.53.3.1.182 | Scalarrm10010MesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.53.3.1.183 | Scalarrm10010MesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.53.3.1.184 | Scalarrm10010MesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset <Help> This … |
| 1.3.6.1.4.1.20044.53.3.1.185 | Scalarrm10010MesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset <Help> This measure gives the avera… |
| 1.3.6.1.4.1.20044.53.3.1.186 | Scalarrm10010MesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset <Help> This measure gives the average Q Factor on the … |
| 1.3.6.1.4.1.20044.53.3.1.187 | Scalarrm10010MesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset <Help> This measure gi… |
| 1.3.6.1.4.1.20044.53.3.1.188 | Scalarrm10010MesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset <Help> This measure gives the average OSNR on the Line interfa… |
| 1.3.6.1.4.1.20044.53.3.1.192 | Scalarrm10010MesrclientNetTxTempMin | read-only | current | Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.53.3.1.193 | Scalarrm10010MesrclientNetTxBiasMin | read-only | current | Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.53.3.1.194 | Scalarrm10010MesrclientNetTxPwrMin | read-only | current | Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.53.3.1.195 | Scalarrm10010MesrclientNetRxPwrMin | read-only | current | Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.53.3.1.196 | Scalarrm10010MesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.53.3.1.197 | Scalarrm10010MesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.53.3.1.198 | Scalarrm10010MesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.53.3.1.199 | Scalarrm10010MesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.53.3.1.200 | Scalarrm10010MesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.53.3.1.201 | Scalarrm10010MesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.53.3.1.202 | Scalarrm10010MesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the minimum Q Factor … |
| 1.3.6.1.4.1.20044.53.3.1.203 | Scalarrm10010MesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.53.3.1.204 | Scalarrm10010MesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the minimum OS… |
| 1.3.6.1.4.1.20044.53.3.1.208 | Scalarrm10010MesrclientNetTxTempMax | read-only | current | Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.53.3.1.209 | Scalarrm10010MesrclientNetTxBiasMax | read-only | current | Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.53.3.1.210 | Scalarrm10010MesrclientNetTxPwrMax | read-only | current | Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.53.3.1.211 | Scalarrm10010MesrclientNetRxPwrMax | read-only | current | Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.53.3.1.212 | Scalarrm10010MesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.53.3.1.213 | Scalarrm10010MesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.53.3.1.214 | Scalarrm10010MesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.53.3.1.215 | Scalarrm10010MesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.53.3.1.216 | Scalarrm10010MesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.53.3.1.217 | Scalarrm10010MesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.53.3.1.218 | Scalarrm10010MesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the maximum Q Factor … |
| 1.3.6.1.4.1.20044.53.3.1.219 | Scalarrm10010MesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.53.3.1.220 | Scalarrm10010MesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the maximum OS… |
| 1.3.6.1.4.1.20044.53.3.2 | Noderm10010MesrClient | |||
| 1.3.6.1.4.1.20044.53.3.2.8 | Scalarrm10010MesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.53.3.2.9 | Scalarrm10010MesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Un… |
| 1.3.6.1.4.1.20044.53.3.2.10 | Scalarrm10010MesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = m… |
| 1.3.6.1.4.1.20044.53.3.2.16 | Tablerm10010MesrclientNetTxTempTable | not-accessible | current | List of rm10010MesrclientNetTxTemp Article |
| 1.3.6.1.4.1.20044.53.3.2.16.1 | Rowrm10010MesrclientNetTxTempEntry | not-accessible | current | Row definition for the rm10010MesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.53.3.2.16.1.1 | Columnrm10010MesrclientNetTxTempIndex | read-only | current | Index definition for the rm10010MesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.53.3.2.16.1.2 | Columnrm10010MesrclientNetTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.53.3.2.32 | Tablerm10010MesrclientNetTxBiasTable | not-accessible | current | List of rm10010MesrclientNetTxBias Article |
| 1.3.6.1.4.1.20044.53.3.2.32.1 | Rowrm10010MesrclientNetTxBiasEntry | not-accessible | current | Row definition for the rm10010MesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.53.3.2.32.1.1 | Columnrm10010MesrclientNetTxBiasIndex | read-only | current | Index definition for the rm10010MesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.53.3.2.32.1.2 | Columnrm10010MesrclientNetTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit… |
| 1.3.6.1.4.1.20044.53.3.2.48 | Tablerm10010MesrclientNetTxPwrTable | not-accessible | current | List of rm10010MesrclientNetTxPwr Article |
| 1.3.6.1.4.1.20044.53.3.2.48.1 | Rowrm10010MesrclientNetTxPwrEntry | not-accessible | current | Row definition for the rm10010MesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.53.3.2.48.1.1 | Columnrm10010MesrclientNetTxPwrIndex | read-only | current | Index definition for the rm10010MesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.53.3.2.48.1.2 | Columnrm10010MesrclientNetTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)… |
| 1.3.6.1.4.1.20044.53.3.2.64 | Tablerm10010MesrclientNetRxPwrTable | not-accessible | current | List of rm10010MesrclientNetRxPwr Article |
| 1.3.6.1.4.1.20044.53.3.2.64.1 | Rowrm10010MesrclientNetRxPwrEntry | not-accessible | current | Row definition for the rm10010MesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.53.3.2.64.1.1 | Columnrm10010MesrclientNetRxPwrIndex | read-only | current | Index definition for the rm10010MesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.53.3.2.64.1.2 | Columnrm10010MesrclientNetRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40… |
| 1.3.6.1.4.1.20044.53.3.3 | Noderm10010MesrLine | |||
| 1.3.6.1.4.1.20044.53.3.3.12 | Scalarrm10010MesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) … |
| 1.3.6.1.4.1.20044.53.3.3.13 | Scalarrm10010MesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit =… |
| 1.3.6.1.4.1.20044.53.3.3.14 | Scalarrm10010MesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <H… |
| 1.3.6.1.4.1.20044.53.3.3.80 | Tablerm10010MesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of rm10010MesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.53.3.3.80.1 | Rowrm10010MesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the rm10010MesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.53.3.3.80.1.1 | Columnrm10010MesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the rm10010MesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.53.3.3.80.1.2 | Columnrm10010MesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.53.3.3.96 | Tablerm10010MesrlineNetTxLaserTempTable | not-accessible | current | List of rm10010MesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.53.3.3.96.1 | Rowrm10010MesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the rm10010MesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.53.3.3.96.1.1 | Columnrm10010MesrlineNetTxLaserTempIndex | read-only | current | Index definition for the rm10010MesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.53.3.3.96.1.2 | Columnrm10010MesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.53.3.3.112 | Tablerm10010MesrlineNetTxBiasCurrentTable | not-accessible | current | List of rm10010MesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.53.3.3.112.1 | Rowrm10010MesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the rm10010MesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.53.3.3.112.1.1 | Columnrm10010MesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the rm10010MesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.53.3.3.112.1.2 | Columnrm10010MesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.53.3.3.128 | Tablerm10010MesrlineNetRxInputPwrTable | not-accessible | current | List of rm10010MesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.53.3.3.128.1 | Rowrm10010MesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the rm10010MesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.53.3.3.128.1.1 | Columnrm10010MesrlineNetRxInputPwrIndex | read-only | current | Index definition for the rm10010MesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.53.3.3.128.1.2 | Columnrm10010MesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (… |
| 1.3.6.1.4.1.20044.53.3.3.144 | Tablerm10010MesrlineResidualChromaticDispTable | not-accessible | current | List of rm10010MesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.53.3.3.144.1 | Rowrm10010MesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the rm10010MesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.53.3.3.144.1.1 | Columnrm10010MesrlineResidualChromaticDispIndex | read-only | current | Index definition for the rm10010MesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.53.3.3.144.1.2 | Columnrm10010MesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.53.3.3.148 | Tablerm10010MesrlineDiffGroupDelayTable | not-accessible | current | List of rm10010MesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.53.3.3.148.1 | Rowrm10010MesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the rm10010MesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.53.3.3.148.1.1 | Columnrm10010MesrlineDiffGroupDelayIndex | read-only | current | Index definition for the rm10010MesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.53.3.3.148.1.2 | Columnrm10010MesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Di… |
| 1.3.6.1.4.1.20044.53.3.3.152 | Tablerm10010MesrlineQFactorTable | not-accessible | current | List of rm10010MesrlineQFactor Article |
| 1.3.6.1.4.1.20044.53.3.3.152.1 | Rowrm10010MesrlineQFactorEntry | not-accessible | current | Row definition for the rm10010MesrlineQFactor table |
| 1.3.6.1.4.1.20044.53.3.3.152.1.1 | Columnrm10010MesrlineQFactorIndex | read-only | current | Index definition for the rm10010MesrlineQFactor table |
| 1.3.6.1.4.1.20044.53.3.3.152.1.2 | Columnrm10010MesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
| 1.3.6.1.4.1.20044.53.3.3.156 | Tablerm10010MesrlineCarrierFreqOffsetTable | not-accessible | current | List of rm10010MesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.53.3.3.156.1 | Rowrm10010MesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the rm10010MesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.53.3.3.156.1.1 | Columnrm10010MesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the rm10010MesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.53.3.3.156.1.2 | Columnrm10010MesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current C… |
| 1.3.6.1.4.1.20044.53.3.3.160 | Tablerm10010MesrlineOsnrTable | not-accessible | current | List of rm10010MesrlineOsnr Article |
| 1.3.6.1.4.1.20044.53.3.3.160.1 | Rowrm10010MesrlineOsnrEntry | not-accessible | current | Row definition for the rm10010MesrlineOsnr table |
| 1.3.6.1.4.1.20044.53.3.3.160.1.1 | Columnrm10010MesrlineOsnrIndex | read-only | current | Index definition for the rm10010MesrlineOsnr table |
| 1.3.6.1.4.1.20044.53.3.3.160.1.2 | Columnrm10010MesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
| 1.3.6.1.4.1.20044.53.4 | Noderm10010counters | |||
| 1.3.6.1.4.1.20044.53.4.1 | Noderm10010CntOther | |||
| 1.3.6.1.4.1.20044.53.4.2 | Noderm10010CntClient | |||
| 1.3.6.1.4.1.20044.53.4.2.16 | Tablerm10010CntclientInputErrorCounterLaneOneTable | not-accessible | current | List of rm10010CntclientInputErrorCounterLaneOne Article |
| 1.3.6.1.4.1.20044.53.4.2.16.1 | Rowrm10010CntclientInputErrorCounterLaneOneEntry | not-accessible | current | Row definition for the rm10010CntclientInputErrorCounterLaneOne table |
| 1.3.6.1.4.1.20044.53.4.2.16.1.1 | Columnrm10010CntclientInputErrorCounterLaneOneIndex | read-only | current | Index definition for the rm10010CntclientInputErrorCounterLaneOne table |
| 1.3.6.1.4.1.20044.53.4.2.16.1.2 | Columnrm10010CntclientInputErrorCounterLaneOneValuePortn | read-only | current | Client_Input_Error_Counter_Lane1 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This c… |
| 1.3.6.1.4.1.20044.53.4.2.16.1.3 | Columnrm10010CntclientInputErrorCounterLaneOneErrorPortn | read-only | current | Client Input Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.2.16.1.4 | Columnrm10010CntclientInputErrorCounterLaneOneOverloadPortn | read-only | current | Client Input Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.2.32 | Tablerm10010CntclientInputErrorCounterLaneTwoTable | not-accessible | current | List of rm10010CntclientInputErrorCounterLaneTwo Article |
| 1.3.6.1.4.1.20044.53.4.2.32.1 | Rowrm10010CntclientInputErrorCounterLaneTwoEntry | not-accessible | current | Row definition for the rm10010CntclientInputErrorCounterLaneTwo table |
| 1.3.6.1.4.1.20044.53.4.2.32.1.1 | Columnrm10010CntclientInputErrorCounterLaneTwoIndex | read-only | current | Index definition for the rm10010CntclientInputErrorCounterLaneTwo table |
| 1.3.6.1.4.1.20044.53.4.2.32.1.2 | Columnrm10010CntclientInputErrorCounterLaneTwoValuePortn | read-only | current | Client_Input_Error_Counter_Lane2 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This c… |
| 1.3.6.1.4.1.20044.53.4.2.32.1.3 | Columnrm10010CntclientInputErrorCounterLaneTwoErrorPortn | read-only | current | Client Input Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.2.32.1.4 | Columnrm10010CntclientInputErrorCounterLaneTwoOverloadPortn | read-only | current | Client Input Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.2.80 | Tablerm10010CntclientInputErrorCounterTable | not-accessible | current | List of rm10010CntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.53.4.2.80.1 | Rowrm10010CntclientInputErrorCounterEntry | not-accessible | current | Row definition for the rm10010CntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.2.80.1.1 | Columnrm10010CntclientInputErrorCounterIndex | read-only | current | Index definition for the rm10010CntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.2.80.1.2 | Columnrm10010CntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.53.4.2.80.1.3 | Columnrm10010CntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.2.80.1.4 | Columnrm10010CntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.2.96 | Tablerm10010CntclientCbipCounterTable | not-accessible | current | List of rm10010CntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.53.4.2.96.1 | Rowrm10010CntclientCbipCounterEntry | not-accessible | current | Row definition for the rm10010CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.53.4.2.96.1.1 | Columnrm10010CntclientCbipCounterIndex | read-only | current | Index definition for the rm10010CntclientCbipCounter table |
| 1.3.6.1.4.1.20044.53.4.2.96.1.2 | Columnrm10010CntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.53.4.2.96.1.3 | Columnrm10010CntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.2.96.1.4 | Columnrm10010CntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.3 | Noderm10010CntLine | |||
| 1.3.6.1.4.1.20044.53.4.3.192 | Tablerm10010CntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of rm10010CntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.53.4.3.192.1 | Rowrm10010CntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm10010CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.192.1.1 | Columnrm10010CntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm10010CntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.192.1.2 | Columnrm10010CntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (r… |
| 1.3.6.1.4.1.20044.53.4.3.192.1.3 | Columnrm10010CntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.3.192.1.4 | Columnrm10010CntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.3.193 | Tablerm10010CntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of rm10010CntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.53.4.3.193.1 | Rowrm10010CntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the rm10010CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.53.4.3.193.1.1 | Columnrm10010CntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the rm10010CntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.53.4.3.193.1.2 | Columnrm10010CntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.53.4.3.193.1.3 | Columnrm10010CntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.53.4.3.193.1.4 | Columnrm10010CntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.53.4.3.194 | Tablerm10010CntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of rm10010CntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.53.4.3.194.1 | Rowrm10010CntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm10010CntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.194.1.1 | Columnrm10010CntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm10010CntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.194.1.2 | Columnrm10010CntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.53.4.3.194.1.3 | Columnrm10010CntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.53.4.3.194.1.4 | Columnrm10010CntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.53.4.3.195 | Tablerm10010CntlineDfrmTimCntTable | not-accessible | current | List of rm10010CntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.53.4.3.195.1 | Rowrm10010CntlineDfrmTimCntEntry | not-accessible | current | Row definition for the rm10010CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.53.4.3.195.1.1 | Columnrm10010CntlineDfrmTimCntIndex | read-only | current | Index definition for the rm10010CntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.53.4.3.195.1.2 | Columnrm10010CntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.53.4.3.195.1.3 | Columnrm10010CntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.3.195.1.4 | Columnrm10010CntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.3.196 | Tablerm10010CntlocalLineTrscvFecCorrectedErrorCounterTable | not-accessible | current | List of rm10010CntlocalLineTrscvFecCorrectedErrorCounter Article |
| 1.3.6.1.4.1.20044.53.4.3.196.1 | Rowrm10010CntlocalLineTrscvFecCorrectedErrorCounterEntry | not-accessible | current | Row definition for the rm10010CntlocalLineTrscvFecCorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.196.1.1 | Columnrm10010CntlocalLineTrscvFecCorrectedErrorCounterIndex | read-only | current | Index definition for the rm10010CntlocalLineTrscvFecCorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.196.1.2 | Columnrm10010CntlocalLineTrscvFecCorrectedErrorCounterValuePortn | read-only | current | Line Input SD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.53.4.3.196.1.3 | Columnrm10010CntlocalLineTrscvFecCorrectedErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.3.196.1.4 | Columnrm10010CntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.53.4.3.197 | Tablerm10010CntlocalLineTrscvFecUncorrectedErrorCounterTable | not-accessible | current | List of rm10010CntlocalLineTrscvFecUncorrectedErrorCounter Article |
| 1.3.6.1.4.1.20044.53.4.3.197.1 | Rowrm10010CntlocalLineTrscvFecUncorrectedErrorCounterEntry | not-accessible | current | Row definition for the rm10010CntlocalLineTrscvFecUncorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.197.1.1 | Columnrm10010CntlocalLineTrscvFecUncorrectedErrorCounterIndex | read-only | current | Index definition for the rm10010CntlocalLineTrscvFecUncorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.53.4.3.197.1.2 | Columnrm10010CntlocalLineTrscvFecUncorrectedErrorCounterValuePortn | read-only | current | SD Uncorrected :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the… |
| 1.3.6.1.4.1.20044.53.4.3.197.1.3 | Columnrm10010CntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.53.4.3.197.1.4 | Columnrm10010CntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.53.6 | Noderm10010controlsWrite | |||
| 1.3.6.1.4.1.20044.53.6.1 | Noderm10010CtrlOther | |||
| 1.3.6.1.4.1.20044.53.6.1.1 | Noderm10010CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.53.6.1.1.1 | Scalarrm10010CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.53.6.1.1.2 | Scalarrm10010CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.53.6.1.1.10 | Scalarrm10010CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.53.6.1.1.14 | Scalarrm10010CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.53.6.1.4 | Noderm10010Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.53.6.1.4.1 | Scalarrm10010CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.53.6.1.4.2 | Scalarrm10010CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.53.6.1.5 | Noderm10010CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.53.6.1.5.2 | Scalarrm10010CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.53.6.1.5.3 | Scalarrm10010CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.53.6.1.5.5 | Scalarrm10010CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.53.6.1.5.6 | Scalarrm10010CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.53.6.1.6 | Noderm10010CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.53.6.1.6.1 | Scalarrm10010CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.53.6.1.6.5 | Scalarrm10010CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.53.6.1.6.6 | Scalarrm10010CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.53.6.1.6.7 | Scalarrm10010CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.53.6.1.6.8 | Scalarrm10010CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.53.6.1.192 | Noderm10010CtrlledTest | |||
| 1.3.6.1.4.1.20044.53.6.1.192.1 | Scalarrm10010CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.53.6.1.192.2 | Scalarrm10010CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.53.6.1.192.3 | Scalarrm10010CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.53.6.1.201 | Noderm10010CtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.53.6.1.201.1 | Scalarrm10010CtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.53.6.1.259 | Noderm10010CtrlresetCount | |||
| 1.3.6.1.4.1.20044.53.6.1.259.1 | Scalarrm10010CtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.53.6.1.260 | Noderm10010CtrlresetRmon | |||
| 1.3.6.1.4.1.20044.53.6.1.260.1 | Scalarrm10010CtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.53.6.1.261 | Noderm10010CtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.53.6.1.261.1 | Scalarrm10010CtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.53.6.2 | Noderm10010CtrlClient | |||
| 1.3.6.1.4.1.20044.53.6.2.16 | Tablerm10010CtrlaccessLoopTable | not-accessible | current | List of rm10010CtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.53.6.2.16.1 | Rowrm10010CtrlaccessLoopEntry | not-accessible | current | Row definition for the rm10010CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.53.6.2.16.1.1 | Columnrm10010CtrlaccessLoopIndex | read-only | current | Index definition for the rm10010CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.53.6.2.16.1.2 | Columnrm10010CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.53.6.2.17 | Tablerm10010CtrlclientLoopToLineTable | not-accessible | current | List of rm10010CtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.53.6.2.17.1 | Rowrm10010CtrlclientLoopToLineEntry | not-accessible | current | Row definition for the rm10010CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.53.6.2.17.1.1 | Columnrm10010CtrlclientLoopToLineIndex | read-only | current | Index definition for the rm10010CtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.53.6.2.17.1.2 | Columnrm10010CtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.53.6.2.21 | Tablerm10010CtrlcsfUpInsTable | not-accessible | current | List of rm10010CtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.53.6.2.21.1 | Rowrm10010CtrlcsfUpInsEntry | not-accessible | current | Row definition for the rm10010CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.53.6.2.21.1.1 | Columnrm10010CtrlcsfUpInsIndex | read-only | current | Index definition for the rm10010CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.53.6.2.21.1.2 | Columnrm10010CtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.53.6.2.22 | Tablerm10010CtrlcaisDwInsTable | not-accessible | current | List of rm10010CtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.53.6.2.22.1 | Rowrm10010CtrlcaisDwInsEntry | not-accessible | current | Row definition for the rm10010CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.53.6.2.22.1.1 | Columnrm10010CtrlcaisDwInsIndex | read-only | current | Index definition for the rm10010CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.53.6.2.22.1.2 | Columnrm10010CtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.53.6.2.262 | Tablerm10010CtrlclientResetAllCountTable | not-accessible | current | List of rm10010CtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.53.6.2.262.1 | Rowrm10010CtrlclientResetAllCountEntry | not-accessible | current | Row definition for the rm10010CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.53.6.2.262.1.1 | Columnrm10010CtrlclientResetAllCountIndex | read-only | current | Index definition for the rm10010CtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.53.6.2.262.1.2 | Columnrm10010CtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.53.6.3 | Noderm10010CtrlLine | |||
| 1.3.6.1.4.1.20044.53.6.3.64 | Tablerm10010CtrlcommAccessLoopTable | not-accessible | current | List of rm10010CtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.53.6.3.64.1 | Rowrm10010CtrlcommAccessLoopEntry | not-accessible | current | Row definition for the rm10010CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.53.6.3.64.1.1 | Columnrm10010CtrlcommAccessLoopIndex | read-only | current | Index definition for the rm10010CtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.53.6.3.64.1.2 | Columnrm10010CtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.53.6.3.66 | Tablerm10010CtrllineLoopTable | not-accessible | current | List of rm10010CtrllineLoop Article |
| 1.3.6.1.4.1.20044.53.6.3.66.1 | Rowrm10010CtrllineLoopEntry | not-accessible | current | Row definition for the rm10010CtrllineLoop table |
| 1.3.6.1.4.1.20044.53.6.3.66.1.1 | Columnrm10010CtrllineLoopIndex | read-only | current | Index definition for the rm10010CtrllineLoop table |
| 1.3.6.1.4.1.20044.53.6.3.66.1.2 | Columnrm10010CtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. … |
| 1.3.6.1.4.1.20044.53.6.3.69 | Tablerm10010CtrlfecDisableTable | not-accessible | current | List of rm10010CtrlfecDisable Article |
| 1.3.6.1.4.1.20044.53.6.3.69.1 | Rowrm10010CtrlfecDisableEntry | not-accessible | current | Row definition for the rm10010CtrlfecDisable table |
| 1.3.6.1.4.1.20044.53.6.3.69.1.1 | Columnrm10010CtrlfecDisableIndex | read-only | current | Index definition for the rm10010CtrlfecDisable table |
| 1.3.6.1.4.1.20044.53.6.3.69.1.2 | Columnrm10010CtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.53.6.3.209 | Tablerm10010CtrlmsaLineLoopTable | not-accessible | current | List of rm10010CtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.53.6.3.209.1 | Rowrm10010CtrlmsaLineLoopEntry | not-accessible | current | Row definition for the rm10010CtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.53.6.3.209.1.1 | Columnrm10010CtrlmsaLineLoopIndex | read-only | current | Index definition for the rm10010CtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.53.6.3.209.1.2 | Columnrm10010CtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.53.6.3.210 | Tablerm10010CtrlmsaTxResetTable | not-accessible | current | List of rm10010CtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.53.6.3.210.1 | Rowrm10010CtrlmsaTxResetEntry | not-accessible | current | Row definition for the rm10010CtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.53.6.3.210.1.1 | Columnrm10010CtrlmsaTxResetIndex | read-only | current | Index definition for the rm10010CtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.53.6.3.210.1.2 | Columnrm10010CtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.53.6.3.211 | Tablerm10010CtrlmsaRxResetTable | not-accessible | current | List of rm10010CtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.53.6.3.211.1 | Rowrm10010CtrlmsaRxResetEntry | not-accessible | current | Row definition for the rm10010CtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.53.6.3.211.1.1 | Columnrm10010CtrlmsaRxResetIndex | read-only | current | Index definition for the rm10010CtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.53.6.3.211.1.2 | Columnrm10010CtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.53.6.3.212 | Tablerm10010CtrlmsaShutdownTable | not-accessible | current | List of rm10010CtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.53.6.3.212.1 | Rowrm10010CtrlmsaShutdownEntry | not-accessible | current | Row definition for the rm10010CtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.53.6.3.212.1.1 | Columnrm10010CtrlmsaShutdownIndex | read-only | current | Index definition for the rm10010CtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.53.6.3.212.1.2 | Columnrm10010CtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.53.6.3.263 | Tablerm10010CtrllineResetAllCountTable | not-accessible | current | List of rm10010CtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.53.6.3.263.1 | Rowrm10010CtrllineResetAllCountEntry | not-accessible | current | Row definition for the rm10010CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.53.6.3.263.1.1 | Columnrm10010CtrllineResetAllCountIndex | read-only | current | Index definition for the rm10010CtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.53.6.3.263.1.2 | Columnrm10010CtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.53.7 | Noderm10010ri | |||
| 1.3.6.1.4.1.20044.53.7.1 | Noderm10010riTable | |||
| 1.3.6.1.4.1.20044.53.7.1.1 | Tablerm10010RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.53.7.1.1.1 | Rowrm10010RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.53.7.1.1.1.1 | Columnrm10010RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.53.7.1.1.1.2 | Columnrm10010Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.53.7.1.2 | Tablerm10010RinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.53.7.1.2.1 | Rowrm10010RinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.53.7.1.2.1.1 | Columnrm10010RinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.53.7.1.2.1.2 | Columnrm10010RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.53.7.2 | Scalarrm10010RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.53.7.3 | Scalarrm10010RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.53.7.4 | Scalarrm10010RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.53.7.5 | Scalarrm10010RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.53.7.6 | Scalarrm10010RinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.53.8 | Noderm10010download | |||
| 1.3.6.1.4.1.20044.53.8.1 | Noderm10010DwlOther | |||
| 1.3.6.1.4.1.20044.53.8.1.0 | Noderm10010DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.53.8.1.0.1 | Scalarrm10010DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.53.8.1.0.2 | Scalarrm10010DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.53.8.1.1 | Noderm10010DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.53.8.1.1.1 | Scalarrm10010DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.53.8.1.1.2 | Scalarrm10010DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.53.8.1.1.5 | Scalarrm10010DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.53.8.1.1.6 | Scalarrm10010DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.53.8.1.2 | Noderm10010DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.53.8.1.2.1 | Scalarrm10010DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.53.8.1.2.2 | Scalarrm10010DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.53.8.1.2.3 | Scalarrm10010DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.53.8.1.2.4 | Scalarrm10010DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.53.8.1.2.5 | Scalarrm10010DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.53.8.1.2.6 | Scalarrm10010DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.53.8.1.2.7 | Scalarrm10010DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.53.8.1.2.8 | Scalarrm10010DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.53.8.2 | Noderm10010DwlClient | |||
| 1.3.6.1.4.1.20044.53.8.3 | Noderm10010DwlLine | |||
| 1.3.6.1.4.1.20044.53.9 | Noderm10010Config | |||
| 1.3.6.1.4.1.20044.53.9.1 | Noderm10010CfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.53.9.1.1 | Tablerm10010CfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.1.1.1 | Rowrm10010CfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.53.9.1.1.1.1 | Columnrm10010CfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.53.9.1.1.1.3 | Columnrm10010CfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.53.9.2 | Noderm10010CfgStartup | |||
| 1.3.6.1.4.1.20044.53.9.2.1 | Tablerm10010CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.2.1.1 | Rowrm10010CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.53.9.2.1.1.1 | Columnrm10010CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.53.9.2.1.1.3 | Columnrm10010CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.53.9.2.1.1.4 | Columnrm10010CfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.53.9.2.1.1.14 | Columnrm10010CfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.53.9.2.2 | Tablerm10010CfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.2.2.1 | Rowrm10010CfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.53.9.2.2.1.1 | Columnrm10010CfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.53.9.2.2.1.3 | Columnrm10010CfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.53.9.2.2.1.14 | Columnrm10010CfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.53.9.2.3 | Tablerm10010CfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.2.3.1 | Rowrm10010CfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.53.9.2.3.1.1 | Columnrm10010CfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.53.9.2.3.1.3 | Columnrm10010CfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.53.9.3 | Noderm10010CfgLabels | |||
| 1.3.6.1.4.1.20044.53.9.3.1 | Tablerm10010CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.3.1.1 | Rowrm10010CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.53.9.3.1.1.1 | Columnrm10010CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.53.9.3.1.1.3 | Columnrm10010CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.53.9.3.2 | Tablerm10010CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.3.2.1 | Rowrm10010CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.53.9.3.2.1.1 | Columnrm10010CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.53.9.3.2.1.3 | Columnrm10010CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.53.9.4 | Noderm10010CfgStartuptlh | |||
| 1.3.6.1.4.1.20044.53.9.4.1 | Tablerm10010CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.4.1.1 | Rowrm10010CfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.53.9.4.1.1.1 | Columnrm10010CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.53.9.4.1.1.6 | Columnrm10010CfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.53.9.4.1.1.7 | Columnrm10010CfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.53.9.4.1.1.8 | Columnrm10010CfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.53.9.4.1.1.9 | Columnrm10010CfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.53.9.4.1.1.10 | Columnrm10010CfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.53.9.5 | Noderm10010CfgOther | |||
| 1.3.6.1.4.1.20044.53.9.5.1 | Noderm10010tablemoduleOther | |||
| 1.3.6.1.4.1.20044.53.9.5.1.2 | Scalarrm10010Cfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.53.9.5.1.3 | Scalarrm10010CfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.53.9.5.1.4 | Scalarrm10010CfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.53.9.6 | Noderm10010CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.53.9.6.1 | Tablerm10010CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.53.9.6.1.1 | Rowrm10010CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.53.9.6.1.1.1 | Columnrm10010CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.53.9.6.1.1.3 | Columnrm10010CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.53.9.6.1.1.4 | Columnrm10010CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.53.9.6.1.1.5 | Columnrm10010CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.53.9.6.1.1.6 | Columnrm10010CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.53.9.6.1.1.7 | Columnrm10010CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.53.9.257 | Scalarrm10010CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.53.10 | Noderm10010traps | |||
| 1.3.6.1.4.1.20044.53.10.2 | Scalarrm10010trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.53.10.3 | Scalarrm10010trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.53.10.4 | Scalarrm10010trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.53.10.30 | Notificationrm10010LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.53.10.31 | Notificationrm10010LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.53.10.32 | Notificationrm10010LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.53.10.33 | Notificationrm10010LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.53.10.34 | Notificationrm10010LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.53.10.35 | Notificationrm10010LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.53.10.40 | Notificationrm10010ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.53.10.41 | Notificationrm10010ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.53.10.42 | Notificationrm10010ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.53.10.43 | Notificationrm10010ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.53.10.44 | Notificationrm10010ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.53.10.45 | Notificationrm10010ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.53.10.50 | Notificationrm10010PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.53.10.51 | Notificationrm10010PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.53.11 | Noderm10010Monitoring | |||
| 1.3.6.1.4.1.20044.53.11.1 | Noderm10010MonOther | |||
| 1.3.6.1.4.1.20044.53.11.1.3 | Noderm10010MonRmon | |||
| 1.3.6.1.4.1.20044.53.11.2 | Noderm10010MonClient | |||
| 1.3.6.1.4.1.20044.53.11.2.4 | Noderm10010MonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.53.11.2.4.16 | Tablerm10010MonupRmonBytesCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.16.1 | Rowrm10010MonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.16.1.1 | Columnrm10010MonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.16.1.2 | Columnrm10010MonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.53.11.2.4.16.1.3 | Columnrm10010MonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.16.1.4 | Columnrm10010MonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.32 | Tablerm10010MonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.32.1 | Rowrm10010MonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.32.1.1 | Columnrm10010MonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.32.1.2 | Columnrm10010MonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors rece… |
| 1.3.6.1.4.1.20044.53.11.2.4.32.1.3 | Columnrm10010MonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.32.1.4 | Columnrm10010MonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.48 | Tablerm10010MonupRmonPacketsCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.48.1 | Rowrm10010MonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.48.1.1 | Columnrm10010MonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.48.1.2 | Columnrm10010MonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.53.11.2.4.48.1.3 | Columnrm10010MonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.48.1.4 | Columnrm10010MonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.64 | Tablerm10010MonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.64.1 | Rowrm10010MonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.64.1.1 | Columnrm10010MonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.64.1.2 | Columnrm10010MonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.53.11.2.4.64.1.3 | Columnrm10010MonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.64.1.4 | Columnrm10010MonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.80 | Tablerm10010MonupRmonMulticastCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.80.1 | Rowrm10010MonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.80.1.1 | Columnrm10010MonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.80.1.2 | Columnrm10010MonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.53.11.2.4.80.1.3 | Columnrm10010MonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.80.1.4 | Columnrm10010MonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.96 | Tablerm10010MonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.96.1 | Rowrm10010MonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.96.1.1 | Columnrm10010MonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.96.1.2 | Columnrm10010MonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.53.11.2.4.96.1.3 | Columnrm10010MonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.96.1.4 | Columnrm10010MonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.160 | Tablerm10010MonupRmonUnicastCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.160.1 | Rowrm10010MonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.160.1.1 | Columnrm10010MonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.160.1.2 | Columnrm10010MonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.53.11.2.4.160.1.3 | Columnrm10010MonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.160.1.4 | Columnrm10010MonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.176 | Tablerm10010MonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of rm10010MonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.176.1 | Rowrm10010MonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010MonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.176.1.1 | Columnrm10010MonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the rm10010MonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.53.11.2.4.176.1.2 | Columnrm10010MonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.53.11.2.4.176.1.3 | Columnrm10010MonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.176.1.4 | Columnrm10010MonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.208 | Tablerm10010MondownRmonBytesCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.208.1 | Rowrm10010MondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.208.1.1 | Columnrm10010MondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.208.1.2 | Columnrm10010MondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.53.11.2.4.208.1.3 | Columnrm10010MondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.208.1.4 | Columnrm10010MondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.224 | Tablerm10010MondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.224.1 | Rowrm10010MondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.224.1.1 | Columnrm10010MondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.224.1.2 | Columnrm10010MondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.53.11.2.4.224.1.3 | Columnrm10010MondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.224.1.4 | Columnrm10010MondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.240 | Tablerm10010MondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.240.1 | Rowrm10010MondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.240.1.1 | Columnrm10010MondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.240.1.2 | Columnrm10010MondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.53.11.2.4.240.1.3 | Columnrm10010MondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.240.1.4 | Columnrm10010MondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.256 | Tablerm10010MondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.256.1 | Rowrm10010MondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.256.1.1 | Columnrm10010MondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.256.1.2 | Columnrm10010MondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.53.11.2.4.256.1.3 | Columnrm10010MondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.256.1.4 | Columnrm10010MondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.272 | Tablerm10010MondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.272.1 | Rowrm10010MondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.272.1.1 | Columnrm10010MondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.272.1.2 | Columnrm10010MondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.53.11.2.4.272.1.3 | Columnrm10010MondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.272.1.4 | Columnrm10010MondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.288 | Tablerm10010MondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.288.1 | Rowrm10010MondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.288.1.1 | Columnrm10010MondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.288.1.2 | Columnrm10010MondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.53.11.2.4.288.1.3 | Columnrm10010MondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.288.1.4 | Columnrm10010MondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.352 | Tablerm10010MondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.352.1 | Rowrm10010MondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.352.1.1 | Columnrm10010MondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.352.1.2 | Columnrm10010MondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.53.11.2.4.352.1.3 | Columnrm10010MondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.352.1.4 | Columnrm10010MondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.368 | Tablerm10010MondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of rm10010MondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.53.11.2.4.368.1 | Rowrm10010MondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010MondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.368.1.1 | Columnrm10010MondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the rm10010MondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.53.11.2.4.368.1.2 | Columnrm10010MondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.53.11.2.4.368.1.3 | Columnrm10010MondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.53.11.2.4.368.1.4 | Columnrm10010MondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.53.11.5 | Noderm10010MonPerfOther | |||
| 1.3.6.1.4.1.20044.53.11.5.1 | Noderm10010MonPerfSync | |||
| 1.3.6.1.4.1.20044.53.11.5.1.257 | Scalarrm10010PerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.53.11.5.1.259 | Scalarrm10010Perf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.53.11.5.1.260 | Scalarrm10010Perf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.53.11.5.2 | Noderm10010MonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.53.11.5.2.1 | Scalarrm10010Perf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.53.11.5.2.2 | Scalarrm10010Perf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.53.11.5.2.5 | Scalarrm10010Perf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.53.11.5.2.6 | Scalarrm10010Perf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.53.11.5.2.7 | Scalarrm10010PerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.53.11.5.2.8 | Scalarrm10010PerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.53.11.6 | Noderm10010MonPerfClient | |||
| 1.3.6.1.4.1.20044.53.11.6.16 | Tablerm10010PerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of rm10010PerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.53.11.6.16.1 | Rowrm10010PerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.6.16.1.1 | Columnrm10010PerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the rm10010PerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.6.16.1.2 | Columnrm10010PerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.16.1.3 | Columnrm10010PerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.16.1.4 | Columnrm10010PerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.16.1.5 | Columnrm10010PerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.16.1.6 | Columnrm10010PerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.16.1.7 | Columnrm10010PerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.16.1.8 | Columnrm10010PerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.16.1.9 | Columnrm10010PerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.16.1.10 | Columnrm10010PerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.16.1.11 | Columnrm10010PerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.32 | Tablerm10010PerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.6.32.1 | Rowrm10010PerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.32.1.1 | Columnrm10010PerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.32.1.2 | Columnrm10010PerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.32.1.3 | Columnrm10010PerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.32.1.4 | Columnrm10010PerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.32.1.5 | Columnrm10010PerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.32.1.6 | Columnrm10010PerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.32.1.7 | Columnrm10010PerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.32.1.8 | Columnrm10010PerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.32.1.9 | Columnrm10010PerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.32.1.10 | Columnrm10010PerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.32.1.11 | Columnrm10010PerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.48 | Tablerm10010PerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of rm10010PerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.53.11.6.48.1 | Rowrm10010PerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.6.48.1.1 | Columnrm10010PerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the rm10010PerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.6.48.1.2 | Columnrm10010PerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.48.1.3 | Columnrm10010PerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.48.1.4 | Columnrm10010PerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.48.1.5 | Columnrm10010PerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.48.1.6 | Columnrm10010PerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.48.1.7 | Columnrm10010PerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.48.1.8 | Columnrm10010PerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.48.1.9 | Columnrm10010PerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.48.1.10 | Columnrm10010PerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.48.1.11 | Columnrm10010PerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.64 | Tablerm10010PerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.6.64.1 | Rowrm10010PerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.64.1.1 | Columnrm10010PerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.64.1.2 | Columnrm10010PerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.64.1.3 | Columnrm10010PerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.64.1.4 | Columnrm10010PerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.64.1.5 | Columnrm10010PerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.64.1.6 | Columnrm10010PerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.64.1.7 | Columnrm10010PerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.64.1.8 | Columnrm10010PerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.64.1.9 | Columnrm10010PerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.64.1.10 | Columnrm10010PerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.64.1.11 | Columnrm10010PerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.80 | Tablerm10010PerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of rm10010PerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.53.11.6.80.1 | Rowrm10010PerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.6.80.1.1 | Columnrm10010PerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the rm10010PerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.6.80.1.2 | Columnrm10010PerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.80.1.3 | Columnrm10010PerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.80.1.4 | Columnrm10010PerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.80.1.5 | Columnrm10010PerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.80.1.6 | Columnrm10010PerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.80.1.7 | Columnrm10010PerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.80.1.8 | Columnrm10010PerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.80.1.9 | Columnrm10010PerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.80.1.10 | Columnrm10010PerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.80.1.11 | Columnrm10010PerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.96 | Tablerm10010PerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.6.96.1 | Rowrm10010PerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.96.1.1 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.96.1.2 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.96.1.3 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.96.1.4 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.96.1.5 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.96.1.6 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.96.1.7 | Columnrm10010PerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.96.1.8 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.96.1.9 | Columnrm10010PerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.96.1.10 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.96.1.11 | Columnrm10010PerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.112 | Tablerm10010PerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of rm10010PerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.53.11.6.112.1 | Rowrm10010PerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.6.112.1.1 | Columnrm10010PerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the rm10010PerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.6.112.1.2 | Columnrm10010PerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.112.1.3 | Columnrm10010PerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.112.1.4 | Columnrm10010PerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.112.1.5 | Columnrm10010PerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.112.1.6 | Columnrm10010PerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.112.1.7 | Columnrm10010PerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.112.1.8 | Columnrm10010PerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.112.1.9 | Columnrm10010PerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.112.1.10 | Columnrm10010PerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.112.1.11 | Columnrm10010PerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.128 | Tablerm10010PerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.6.128.1 | Rowrm10010PerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.128.1.1 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.128.1.2 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.128.1.3 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.6.128.1.4 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.128.1.5 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.128.1.6 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.128.1.7 | Columnrm10010PerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.128.1.8 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.128.1.9 | Columnrm10010PerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.128.1.10 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.128.1.11 | Columnrm10010PerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.6.432 | Tablerm10010PerfDatacomClientCurrent15StatTable | not-accessible | current | List of rm10010PerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.53.11.6.432.1 | Rowrm10010PerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10010PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.6.432.1.1 | Columnrm10010PerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the rm10010PerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.6.432.1.4 | Columnrm10010perfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.432.1.5 | Columnrm10010perfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.432.1.6 | Columnrm10010perfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.432.1.7 | Columnrm10010perfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.53.11.6.432.1.28 | Columnrm10010perfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.432.1.29 | Columnrm10010perfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.432.1.30 | Columnrm10010perfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.432.1.31 | Columnrm10010perfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.53.11.6.448 | Tablerm10010PerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10010PerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.6.448.1 | Rowrm10010PerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.448.1.1 | Columnrm10010PerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.448.1.4 | Columnrm10010perfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.448.1.5 | Columnrm10010perfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.448.1.6 | Columnrm10010perfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.448.1.7 | Columnrm10010perfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.53.11.6.448.1.28 | Columnrm10010perfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.448.1.29 | Columnrm10010perfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.448.1.30 | Columnrm10010perfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.448.1.31 | Columnrm10010perfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.53.11.6.464 | Tablerm10010PerfDatacomClientCurrent24StatTable | not-accessible | current | List of rm10010PerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.53.11.6.464.1 | Rowrm10010PerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10010PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.6.464.1.1 | Columnrm10010PerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the rm10010PerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.6.464.1.4 | Columnrm10010perfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.464.1.5 | Columnrm10010perfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.464.1.6 | Columnrm10010perfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.464.1.7 | Columnrm10010perfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.53.11.6.464.1.28 | Columnrm10010perfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.464.1.29 | Columnrm10010perfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.464.1.30 | Columnrm10010perfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.464.1.31 | Columnrm10010perfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.53.11.6.480 | Tablerm10010PerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10010PerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.6.480.1 | Rowrm10010PerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.480.1.1 | Columnrm10010PerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.6.480.1.4 | Columnrm10010perfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.480.1.5 | Columnrm10010perfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.480.1.6 | Columnrm10010perfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.480.1.7 | Columnrm10010perfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.53.11.6.480.1.28 | Columnrm10010perfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.480.1.29 | Columnrm10010perfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.53.11.6.480.1.30 | Columnrm10010perfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.53.11.6.480.1.31 | Columnrm10010perfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.53.11.7 | Noderm10010MonPerfLine | |||
| 1.3.6.1.4.1.20044.53.11.7.192 | Tablerm10010PerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of rm10010PerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.53.11.7.192.1 | Rowrm10010PerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.7.192.1.1 | Columnrm10010PerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the rm10010PerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.7.192.1.2 | Columnrm10010PerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.192.1.3 | Columnrm10010PerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.192.1.4 | Columnrm10010PerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.192.1.5 | Columnrm10010PerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.192.1.6 | Columnrm10010PerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.192.1.7 | Columnrm10010PerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.192.1.8 | Columnrm10010PerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.192.1.9 | Columnrm10010PerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.192.1.10 | Columnrm10010PerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.192.1.11 | Columnrm10010PerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.193 | Tablerm10010PerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.7.193.1 | Rowrm10010PerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.193.1.1 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.193.1.2 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.193.1.3 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.193.1.4 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.193.1.5 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.193.1.6 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.193.1.7 | Columnrm10010PerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.193.1.8 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.193.1.9 | Columnrm10010PerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.193.1.10 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.193.1.11 | Columnrm10010PerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.194 | Tablerm10010PerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of rm10010PerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.53.11.7.194.1 | Rowrm10010PerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.7.194.1.1 | Columnrm10010PerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the rm10010PerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.7.194.1.2 | Columnrm10010PerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.194.1.3 | Columnrm10010PerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.194.1.4 | Columnrm10010PerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.194.1.5 | Columnrm10010PerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.194.1.6 | Columnrm10010PerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.194.1.7 | Columnrm10010PerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.194.1.8 | Columnrm10010PerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.194.1.9 | Columnrm10010PerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.194.1.10 | Columnrm10010PerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.194.1.11 | Columnrm10010PerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.195 | Tablerm10010PerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.7.195.1 | Rowrm10010PerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.195.1.1 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.195.1.2 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.195.1.3 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.195.1.4 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.195.1.5 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.195.1.6 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.195.1.7 | Columnrm10010PerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.195.1.8 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.195.1.9 | Columnrm10010PerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.195.1.10 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.195.1.11 | Columnrm10010PerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.208 | Tablerm10010PerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of rm10010PerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.53.11.7.208.1 | Rowrm10010PerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.7.208.1.1 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the rm10010PerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.53.11.7.208.1.2 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.208.1.3 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.208.1.4 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.208.1.5 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.208.1.6 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.208.1.7 | Columnrm10010PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.209 | Tablerm10010PerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.7.209.1 | Rowrm10010PerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.209.1.1 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.209.1.2 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.209.1.3 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.209.1.4 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.209.1.5 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.209.1.6 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.209.1.7 | Columnrm10010PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.210 | Tablerm10010PerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of rm10010PerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.53.11.7.210.1 | Rowrm10010PerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the rm10010PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.7.210.1.1 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the rm10010PerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.53.11.7.210.1.2 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.210.1.3 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.210.1.4 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.210.1.5 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.210.1.6 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.210.1.7 | Columnrm10010PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.211 | Tablerm10010PerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of rm10010PerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.53.11.7.211.1 | Rowrm10010PerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.211.1.1 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010PerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.53.11.7.211.1.2 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.211.1.3 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.53.11.7.211.1.4 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.211.1.5 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.53.11.7.211.1.6 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.53.11.7.211.1.7 | Columnrm10010PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Rm10010AdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Rm10010ClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Rm10010MultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Rm10010OrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Rm10010OtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Rm10010OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Rm10010OtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Rm10010ProtocolMode | INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } | current | Different values on the protocol mode |