EKINOPS-Rm10010wb-MIB
865 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.92 | IdentitymoduleRm10010wb | Creation. | ||
| 1.3.6.1.4.1.20044.92.2 | Noderm10010wbalarms | |||
| 1.3.6.1.4.1.20044.92.2.1 | Noderm10010wbAlmOther | |||
| 1.3.6.1.4.1.20044.92.2.1.1 | Noderm10010wbAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.92.2.1.1.2 | Noderm10010wbAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.92.2.1.1.2.1 | Scalarrm10010wbAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.92.2.1.1.2.2 | Scalarrm10010wbAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.92.2.1.1.2.3 | Scalarrm10010wbAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.92.2.1.1.2.4 | Scalarrm10010wbAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.92.2.1.1.2.5 | Scalarrm10010wbAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.92.2.1.2 | Noderm10010wbAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.92.2.1.3 | Noderm10010wbAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.92.2.1.3.0 | Noderm10010wbAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.92.2.1.3.0.2 | Scalarrm10010wbAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.92.2.1.3.0.9 | Scalarrm10010wbAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.92.2.1.3.0.15 | Scalarrm10010wbAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.92.2.1.3.0.16 | Scalarrm10010wbAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.92.2.1.3.78 | Noderm10010wbAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.92.2.1.3.78.1 | Scalarrm10010wbAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.2 | Scalarrm10010wbAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.3 | Scalarrm10010wbAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.4 | Scalarrm10010wbAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.5 | Scalarrm10010wbAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.92.2.1.3.78.6 | Scalarrm10010wbAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.7 | Scalarrm10010wbAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.8 | Scalarrm10010wbAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.9 | Scalarrm10010wbAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.13 | Scalarrm10010wbAlmMsaTempShutdown | read-only | current | Line Trscv Temperature Shutdown :This OID indicates a Trscv shutdown caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature shutdow… |
| 1.3.6.1.4.1.20044.92.2.1.3.78.14 | Scalarrm10010wbAlmMsaTempWarning | read-only | current | Line Trscv Temperature Warning :This OID indicates a Trscv warning caused by a temperature is out of range<Help> Warning indicating a Trscv temperature out of … |
| 1.3.6.1.4.1.20044.92.2.1.3.78.15 | Scalarrm10010wbAlmMsaTempAlarm | read-only | current | Line Trscv Temperature Alarm :This OID indicates a Trscv alarm caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature out of range … |
| 1.3.6.1.4.1.20044.92.2.1.3.78.16 | Scalarrm10010wbAlmCoolingSystemAbsent | read-only | current | Air Flow Module Absent :This OID indicates a cooling system not present as recommended by the rules<Help> Alarm indicating a cooling system not present as reco… |
| 1.3.6.1.4.1.20044.92.2.2 | Noderm10010wbAlmClient | |||
| 1.3.6.1.4.1.20044.92.2.2.1 | Noderm10010wbAlmClientNurg | |||
| 1.3.6.1.4.1.20044.92.2.2.1.272 | Tablerm10010wbAlmclientSfpWarnDdmTable | not-accessible | current | List of rm10010wbAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1 | Rowrm10010wbAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the rm10010wbAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.1 | Columnrm10010wbAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the rm10010wbAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.2 | Columnrm10010wbAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.3 | Columnrm10010wbAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.4 | Columnrm10010wbAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.5 | Columnrm10010wbAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.16 | Columnrm10010wbAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.92.2.2.1.272.1.17 | Columnrm10010wbAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.92.2.2.2 | Noderm10010wbAlmClientUrg | |||
| 1.3.6.1.4.1.20044.92.2.2.2.152 | Tablerm10010wbAlmclientHostLaneFaultTable | not-accessible | current | List of rm10010wbAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1 | Rowrm10010wbAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the rm10010wbAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.1 | Columnrm10010wbAlmclientHostLaneFaultIndex | read-only | current | Index definition for the rm10010wbAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.2 | Columnrm10010wbAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.3 | Columnrm10010wbAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.4 | Columnrm10010wbAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.5 | Columnrm10010wbAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.6 | Columnrm10010wbAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.7 | Columnrm10010wbAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.10 | Columnrm10010wbAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.92.2.2.2.152.1.11 | Columnrm10010wbAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.92.2.2.2.240 | Tablerm10010wbAlmclientSfpAlmDdmTable | not-accessible | current | List of rm10010wbAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1 | Rowrm10010wbAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the rm10010wbAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.1 | Columnrm10010wbAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the rm10010wbAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.2 | Columnrm10010wbAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.3 | Columnrm10010wbAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.4 | Columnrm10010wbAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.5 | Columnrm10010wbAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.16 | Columnrm10010wbAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.92.2.2.2.240.1.17 | Columnrm10010wbAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.92.2.2.3 | Noderm10010wbAlmClientCrit | |||
| 1.3.6.1.4.1.20044.92.2.2.3.8 | Tablerm10010wbAlmsynthAlmPortTable | not-accessible | current | List of rm10010wbAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1 | Rowrm10010wbAlmsynthAlmPortEntry | not-accessible | current | Row definition for the rm10010wbAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.1 | Columnrm10010wbAlmsynthAlmPortIndex | read-only | current | Index definition for the rm10010wbAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.2 | Columnrm10010wbAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.3 | Columnrm10010wbAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.5 | Columnrm10010wbAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.6 | Columnrm10010wbAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.7 | Columnrm10010wbAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.8 | Columnrm10010wbAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.9 | Columnrm10010wbAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.10 | Columnrm10010wbAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.11 | Columnrm10010wbAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.13 | Columnrm10010wbAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.92.2.2.3.8.1.17 | Columnrm10010wbAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.92.2.3 | Noderm10010wbAlmLine | |||
| 1.3.6.1.4.1.20044.92.2.3.1 | Noderm10010wbAlmLineNurg | |||
| 1.3.6.1.4.1.20044.92.2.3.1.184 | Tablerm10010wbAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of rm10010wbAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1 | Rowrm10010wbAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the rm10010wbAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.1 | Columnrm10010wbAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the rm10010wbAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.2 | Columnrm10010wbAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.3 | Columnrm10010wbAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.4 | Columnrm10010wbAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.5 | Columnrm10010wbAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.6 | Columnrm10010wbAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.7 | Columnrm10010wbAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.8 | Columnrm10010wbAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.9 | Columnrm10010wbAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.10 | Columnrm10010wbAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.11 | Columnrm10010wbAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.12 | Columnrm10010wbAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.13 | Columnrm10010wbAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.14 | Columnrm10010wbAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.15 | Columnrm10010wbAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.16 | Columnrm10010wbAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.92.2.3.1.184.1.17 | Columnrm10010wbAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.92.2.3.1.188 | Tablerm10010wbAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of rm10010wbAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1 | Rowrm10010wbAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the rm10010wbAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.1 | Columnrm10010wbAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the rm10010wbAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.2 | Columnrm10010wbAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.3 | Columnrm10010wbAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.4 | Columnrm10010wbAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.5 | Columnrm10010wbAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.6 | Columnrm10010wbAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.7 | Columnrm10010wbAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.8 | Columnrm10010wbAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.9 | Columnrm10010wbAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.10 | Columnrm10010wbAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.11 | Columnrm10010wbAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.12 | Columnrm10010wbAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.13 | Columnrm10010wbAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.14 | Columnrm10010wbAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.15 | Columnrm10010wbAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.16 | Columnrm10010wbAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.92.2.3.1.188.1.17 | Columnrm10010wbAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.92.2.3.2 | Noderm10010wbAlmLineUrg | |||
| 1.3.6.1.4.1.20044.92.2.3.2.196 | Tablerm10010wbAlmlineHostLaneFaultTable | not-accessible | current | List of rm10010wbAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1 | Rowrm10010wbAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the rm10010wbAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.1 | Columnrm10010wbAlmlineHostLaneFaultIndex | read-only | current | Index definition for the rm10010wbAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.2 | Columnrm10010wbAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.3 | Columnrm10010wbAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.4 | Columnrm10010wbAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.5 | Columnrm10010wbAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.6 | Columnrm10010wbAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.7 | Columnrm10010wbAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.10 | Columnrm10010wbAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.92.2.3.2.196.1.11 | Columnrm10010wbAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.92.2.3.3 | Noderm10010wbAlmLineCrit | |||
| 1.3.6.1.4.1.20044.92.2.3.3.40 | Tablerm10010wbAlmsynthAlmLineTable | not-accessible | current | List of rm10010wbAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1 | Rowrm10010wbAlmsynthAlmLineEntry | not-accessible | current | Row definition for the rm10010wbAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.1 | Columnrm10010wbAlmsynthAlmLineIndex | read-only | current | Index definition for the rm10010wbAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.2 | Columnrm10010wbAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.3 | Columnrm10010wbAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.5 | Columnrm10010wbAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.6 | Columnrm10010wbAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.7 | Columnrm10010wbAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.9 | Columnrm10010wbAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.10 | Columnrm10010wbAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.11 | Columnrm10010wbAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.13 | Columnrm10010wbAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.92.2.3.3.40.1.17 | Columnrm10010wbAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.92.3 | Noderm10010wbmeasures | |||
| 1.3.6.1.4.1.20044.92.3.1 | Noderm10010wbMesrOther | |||
| 1.3.6.1.4.1.20044.92.3.1.0 | Scalarrm10010wbMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.92.3.1.1 | Scalarrm10010wbMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.92.3.1.7 | Scalarrm10010wbMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.92.3.1.196 | Scalarrm10010wbMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.92.3.1.197 | Scalarrm10010wbMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.92.3.1.198 | Scalarrm10010wbMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.92.3.1.199 | Scalarrm10010wbMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.92.3.1.200 | Scalarrm10010wbMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion … |
| 1.3.6.1.4.1.20044.92.3.1.201 | Scalarrm10010wbMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = ps)<Help> … |
| 1.3.6.1.4.1.20044.92.3.1.202 | Scalarrm10010wbMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB) <Help> This measure gi… |
| 1.3.6.1.4.1.20044.92.3.1.203 | Scalarrm10010wbMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Uni… |
| 1.3.6.1.4.1.20044.92.3.1.204 | Scalarrm10010wbMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the av… |
| 1.3.6.1.4.1.20044.92.3.1.212 | Scalarrm10010wbMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.92.3.1.213 | Scalarrm10010wbMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.92.3.1.214 | Scalarrm10010wbMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.92.3.1.215 | Scalarrm10010wbMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.92.3.1.216 | Scalarrm10010wbMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.92.3.1.217 | Scalarrm10010wbMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.92.3.1.218 | Scalarrm10010wbMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.92.3.1.219 | Scalarrm10010wbMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.92.3.1.220 | Scalarrm10010wbMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the minimu… |
| 1.3.6.1.4.1.20044.92.3.1.228 | Scalarrm10010wbMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.92.3.1.229 | Scalarrm10010wbMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.92.3.1.230 | Scalarrm10010wbMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.92.3.1.231 | Scalarrm10010wbMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.92.3.1.232 | Scalarrm10010wbMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.92.3.1.233 | Scalarrm10010wbMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.92.3.1.234 | Scalarrm10010wbMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.92.3.1.235 | Scalarrm10010wbMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.92.3.1.236 | Scalarrm10010wbMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the maximu… |
| 1.3.6.1.4.1.20044.92.3.1.249 | Scalarrm10010wbMesrregVoltage | read-only | current | Regulator Voltage :This OID gives the voltage value of the Regulator (Voltage = AV_U16) (Unit = mV) <Help> This Measure gives the Regulator Voltage |
| 1.3.6.1.4.1.20044.92.3.1.250 | Scalarrm10010wbMesrregCurrent | read-only | current | Regulator Current :This OID gives the current value of the Regulator (Current = AV_U16/1000) (Unit = A) <Help> This Measure gives the Regulator Current |
| 1.3.6.1.4.1.20044.92.3.1.251 | Scalarrm10010wbMesrregTemp | read-only | current | Regulator Temperature :This OID gives the temperature value of the Regulator (Temperature = AV_S16) (Unit = C) <Help> This Measure gives the Regulator Temperat… |
| 1.3.6.1.4.1.20044.92.3.1.252 | Scalarrm10010wbMesrtrscv1Temp | read-only | current | Q1 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Un… |
| 1.3.6.1.4.1.20044.92.3.1.253 | Scalarrm10010wbMesrtrscv2Temp | read-only | current | Q2 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Un… |
| 1.3.6.1.4.1.20044.92.3.1.254 | Scalarrm10010wbMesrtrscv1PowerSupply | read-only | current | Q1 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.92.3.1.255 | Scalarrm10010wbMesrtrscv2PowerSupply | read-only | current | Q2 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.92.3.1.400 | Scalarrm10010wbMesrlineTrscvTemp | read-only | current | LineTrscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (U… |
| 1.3.6.1.4.1.20044.92.3.1.408 | Scalarrm10010wbMesrlineTrscvVoltage | read-only | current | Line Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/100… |
| 1.3.6.1.4.1.20044.92.3.2 | Noderm10010wbMesrClient | |||
| 1.3.6.1.4.1.20044.92.3.2.8 | Scalarrm10010wbMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S… |
| 1.3.6.1.4.1.20044.92.3.2.9 | Scalarrm10010wbMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.92.3.2.10 | Scalarrm10010wbMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit… |
| 1.3.6.1.4.1.20044.92.3.2.16 | Tablerm10010wbMesrclientTxTempTable | not-accessible | current | List of rm10010wbMesrclientTxTemp Article |
| 1.3.6.1.4.1.20044.92.3.2.16.1 | Rowrm10010wbMesrclientTxTempEntry | not-accessible | current | Row definition for the rm10010wbMesrclientTxTemp table |
| 1.3.6.1.4.1.20044.92.3.2.16.1.1 | Columnrm10010wbMesrclientTxTempIndex | read-only | current | Index definition for the rm10010wbMesrclientTxTemp table |
| 1.3.6.1.4.1.20044.92.3.2.16.1.2 | Columnrm10010wbMesrclientTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.92.3.2.48 | Tablerm10010wbMesrclientTxBiasTable | not-accessible | current | List of rm10010wbMesrclientTxBias Article |
| 1.3.6.1.4.1.20044.92.3.2.48.1 | Rowrm10010wbMesrclientTxBiasEntry | not-accessible | current | Row definition for the rm10010wbMesrclientTxBias table |
| 1.3.6.1.4.1.20044.92.3.2.48.1.1 | Columnrm10010wbMesrclientTxBiasIndex | read-only | current | Index definition for the rm10010wbMesrclientTxBias table |
| 1.3.6.1.4.1.20044.92.3.2.48.1.2 | Columnrm10010wbMesrclientTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (… |
| 1.3.6.1.4.1.20044.92.3.2.80 | Tablerm10010wbMesrclientTxPwrTable | not-accessible | current | List of rm10010wbMesrclientTxPwr Article |
| 1.3.6.1.4.1.20044.92.3.2.80.1 | Rowrm10010wbMesrclientTxPwrEntry | not-accessible | current | Row definition for the rm10010wbMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.92.3.2.80.1.1 | Columnrm10010wbMesrclientTxPwrIndex | read-only | current | Index definition for the rm10010wbMesrclientTxPwr table |
| 1.3.6.1.4.1.20044.92.3.2.80.1.2 | Columnrm10010wbMesrclientTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_… |
| 1.3.6.1.4.1.20044.92.3.2.112 | Tablerm10010wbMesrclientRxPwrTable | not-accessible | current | List of rm10010wbMesrclientRxPwr Article |
| 1.3.6.1.4.1.20044.92.3.2.112.1 | Rowrm10010wbMesrclientRxPwrEntry | not-accessible | current | Row definition for the rm10010wbMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.92.3.2.112.1.1 | Columnrm10010wbMesrclientRxPwrIndex | read-only | current | Index definition for the rm10010wbMesrclientRxPwr table |
| 1.3.6.1.4.1.20044.92.3.2.112.1.2 | Columnrm10010wbMesrclientRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16… |
| 1.3.6.1.4.1.20044.92.3.2.256 | Tablerm10010wbMesrclientTxCompositePwrTable | not-accessible | current | List of rm10010wbMesrclientTxCompositePwr Article |
| 1.3.6.1.4.1.20044.92.3.2.256.1 | Rowrm10010wbMesrclientTxCompositePwrEntry | not-accessible | current | Row definition for the rm10010wbMesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.92.3.2.256.1.1 | Columnrm10010wbMesrclientTxCompositePwrIndex | read-only | current | Index definition for the rm10010wbMesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.92.3.2.256.1.2 | Columnrm10010wbMesrclientTxCompositePwrPortn | read-only | current | Client Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from… |
| 1.3.6.1.4.1.20044.92.3.2.288 | Tablerm10010wbMesrclientRxCompositePwrTable | not-accessible | current | List of rm10010wbMesrclientRxCompositePwr Article |
| 1.3.6.1.4.1.20044.92.3.2.288.1 | Rowrm10010wbMesrclientRxCompositePwrEntry | not-accessible | current | Row definition for the rm10010wbMesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.92.3.2.288.1.1 | Columnrm10010wbMesrclientRxCompositePwrIndex | read-only | current | Index definition for the rm10010wbMesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.92.3.2.288.1.2 | Columnrm10010wbMesrclientRxCompositePwrPortn | read-only | current | Client Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from t… |
| 1.3.6.1.4.1.20044.92.3.3 | Noderm10010wbMesrLine | |||
| 1.3.6.1.4.1.20044.92.3.3.12 | Scalarrm10010wbMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/2… |
| 1.3.6.1.4.1.20044.92.3.3.13 | Scalarrm10010wbMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000) (U… |
| 1.3.6.1.4.1.20044.92.3.3.14 | Scalarrm10010wbMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.92.3.3.144 | Tablerm10010wbMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of rm10010wbMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.92.3.3.144.1 | Rowrm10010wbMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the rm10010wbMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.92.3.3.144.1.1 | Columnrm10010wbMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the rm10010wbMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.92.3.3.144.1.2 | Columnrm10010wbMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.92.3.3.148 | Tablerm10010wbMesrlineNetTxLaserTempTable | not-accessible | current | List of rm10010wbMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.92.3.3.148.1 | Rowrm10010wbMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the rm10010wbMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.92.3.3.148.1.1 | Columnrm10010wbMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the rm10010wbMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.92.3.3.148.1.2 | Columnrm10010wbMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.92.3.3.152 | Tablerm10010wbMesrlineNetTxBiasCurrentTable | not-accessible | current | List of rm10010wbMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.92.3.3.152.1 | Rowrm10010wbMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the rm10010wbMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.92.3.3.152.1.1 | Columnrm10010wbMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the rm10010wbMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.92.3.3.152.1.2 | Columnrm10010wbMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_… |
| 1.3.6.1.4.1.20044.92.3.3.156 | Tablerm10010wbMesrlineNetRxInputPwrTable | not-accessible | current | List of rm10010wbMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.92.3.3.156.1 | Rowrm10010wbMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the rm10010wbMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.92.3.3.156.1.1 | Columnrm10010wbMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the rm10010wbMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.92.3.3.156.1.2 | Columnrm10010wbMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/10… |
| 1.3.6.1.4.1.20044.92.3.3.160 | Tablerm10010wbMesrlineResidualChromaticDispTable | not-accessible | current | List of rm10010wbMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.92.3.3.160.1 | Rowrm10010wbMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the rm10010wbMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.92.3.3.160.1.1 | Columnrm10010wbMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the rm10010wbMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.92.3.3.160.1.2 | Columnrm10010wbMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_S16*(-2)) (Unit = ps/nm)… |
| 1.3.6.1.4.1.20044.92.3.3.164 | Tablerm10010wbMesrlineDiffGroupDelayTable | not-accessible | current | List of rm10010wbMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.92.3.3.164.1 | Rowrm10010wbMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the rm10010wbMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.92.3.3.164.1.1 | Columnrm10010wbMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the rm10010wbMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.92.3.3.164.1.2 | Columnrm10010wbMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Delay = AV_S16) (Unit = ps)<Help> This measure giv… |
| 1.3.6.1.4.1.20044.92.3.3.168 | Tablerm10010wbMesrlineQFactorTable | not-accessible | current | List of rm10010wbMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.92.3.3.168.1 | Rowrm10010wbMesrlineQFactorEntry | not-accessible | current | Row definition for the rm10010wbMesrlineQFactor table |
| 1.3.6.1.4.1.20044.92.3.3.168.1.1 | Columnrm10010wbMesrlineQFactorIndex | read-only | current | Index definition for the rm10010wbMesrlineQFactor table |
| 1.3.6.1.4.1.20044.92.3.3.168.1.2 | Columnrm10010wbMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Q Factor = AV_U16) (Unit = dB) <Help> This measure gives the current Q Factor on t… |
| 1.3.6.1.4.1.20044.92.3.3.172 | Tablerm10010wbMesrlineCarrierFreqOffsetTable | not-accessible | current | List of rm10010wbMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.92.3.3.172.1 | Rowrm10010wbMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the rm10010wbMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.92.3.3.172.1.1 | Columnrm10010wbMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the rm10010wbMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.92.3.3.172.1.2 | Columnrm10010wbMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Offset = AV_S16) (Unit = MHz)<Help> This measure g… |
| 1.3.6.1.4.1.20044.92.3.3.176 | Tablerm10010wbMesrlineOsnrTable | not-accessible | current | List of rm10010wbMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.92.3.3.176.1 | Rowrm10010wbMesrlineOsnrEntry | not-accessible | current | Row definition for the rm10010wbMesrlineOsnr table |
| 1.3.6.1.4.1.20044.92.3.3.176.1.1 | Columnrm10010wbMesrlineOsnrIndex | read-only | current | Index definition for the rm10010wbMesrlineOsnr table |
| 1.3.6.1.4.1.20044.92.3.3.176.1.2 | Columnrm10010wbMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interf… |
| 1.3.6.1.4.1.20044.92.4 | Noderm10010wbcounters | |||
| 1.3.6.1.4.1.20044.92.4.1 | Noderm10010wbCntOther | |||
| 1.3.6.1.4.1.20044.92.4.2 | Noderm10010wbCntClient | |||
| 1.3.6.1.4.1.20044.92.4.2.112 | Tablerm10010wbCntclientInputErrorCounterTable | not-accessible | current | List of rm10010wbCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.92.4.2.112.1 | Rowrm10010wbCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the rm10010wbCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.2.112.1.1 | Columnrm10010wbCntclientInputErrorCounterIndex | read-only | current | Index definition for the rm10010wbCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.2.112.1.2 | Columnrm10010wbCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.92.4.2.112.1.3 | Columnrm10010wbCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.2.112.1.4 | Columnrm10010wbCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.2.144 | Tablerm10010wbCntclientCbipCounterTable | not-accessible | current | List of rm10010wbCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.92.4.2.144.1 | Rowrm10010wbCntclientCbipCounterEntry | not-accessible | current | Row definition for the rm10010wbCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.92.4.2.144.1.1 | Columnrm10010wbCntclientCbipCounterIndex | read-only | current | Index definition for the rm10010wbCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.92.4.2.144.1.2 | Columnrm10010wbCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.92.4.2.144.1.3 | Columnrm10010wbCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.2.144.1.4 | Columnrm10010wbCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.3 | Noderm10010wbCntLine | |||
| 1.3.6.1.4.1.20044.92.4.3.192 | Tablerm10010wbCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of rm10010wbCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.192.1 | Rowrm10010wbCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm10010wbCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.192.1.1 | Columnrm10010wbCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm10010wbCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.192.1.2 | Columnrm10010wbCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate a… |
| 1.3.6.1.4.1.20044.92.4.3.192.1.3 | Columnrm10010wbCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.3.192.1.4 | Columnrm10010wbCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.3.193 | Tablerm10010wbCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of rm10010wbCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.193.1 | Rowrm10010wbCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the rm10010wbCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.92.4.3.193.1.1 | Columnrm10010wbCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the rm10010wbCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.92.4.3.193.1.2 | Columnrm10010wbCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.92.4.3.193.1.3 | Columnrm10010wbCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.92.4.3.193.1.4 | Columnrm10010wbCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.92.4.3.194 | Tablerm10010wbCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of rm10010wbCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.194.1 | Rowrm10010wbCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm10010wbCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.194.1.1 | Columnrm10010wbCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm10010wbCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.194.1.2 | Columnrm10010wbCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.92.4.3.194.1.3 | Columnrm10010wbCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.92.4.3.194.1.4 | Columnrm10010wbCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.92.4.3.195 | Tablerm10010wbCntlineDfrmTimCntTable | not-accessible | current | List of rm10010wbCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.92.4.3.195.1 | Rowrm10010wbCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the rm10010wbCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.92.4.3.195.1.1 | Columnrm10010wbCntlineDfrmTimCntIndex | read-only | current | Index definition for the rm10010wbCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.92.4.3.195.1.2 | Columnrm10010wbCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.92.4.3.195.1.3 | Columnrm10010wbCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.3.195.1.4 | Columnrm10010wbCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.3.196 | Tablerm10010wbCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of rm10010wbCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.196.1 | Rowrm10010wbCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the rm10010wbCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.196.1.1 | Columnrm10010wbCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the rm10010wbCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.196.1.2 | Columnrm10010wbCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC |
| 1.3.6.1.4.1.20044.92.4.3.196.1.3 | Columnrm10010wbCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.3.196.1.4 | Columnrm10010wbCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.3.197 | Tablerm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of rm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.197.1 | Rowrm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the rm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.197.1.1 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the rm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.92.4.3.197.1.2 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate a… |
| 1.3.6.1.4.1.20044.92.4.3.197.1.3 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.3.197.1.4 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.3.198 | Tablerm10010wbCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of rm10010wbCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.198.1 | Rowrm10010wbCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the rm10010wbCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.92.4.3.198.1.1 | Columnrm10010wbCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the rm10010wbCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.92.4.3.198.1.2 | Columnrm10010wbCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.92.4.3.198.1.3 | Columnrm10010wbCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.3.198.1.4 | Columnrm10010wbCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.92.4.3.199 | Tablerm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of rm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.92.4.3.199.1 | Rowrm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the rm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.92.4.3.199.1.1 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the rm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.92.4.3.199.1.2 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.92.4.3.199.1.3 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.92.4.3.199.1.4 | Columnrm10010wbCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.92.6 | Noderm10010wbcontrolsWrite | |||
| 1.3.6.1.4.1.20044.92.6.1 | Noderm10010wbCtrlOther | |||
| 1.3.6.1.4.1.20044.92.6.1.1 | Noderm10010wbCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.92.6.1.1.1 | Scalarrm10010wbCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.92.6.1.1.2 | Scalarrm10010wbCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.92.6.1.1.10 | Scalarrm10010wbCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.92.6.1.1.14 | Scalarrm10010wbCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.92.6.1.4 | Noderm10010wbCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.92.6.1.4.1 | Scalarrm10010wbCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.92.6.1.4.2 | Scalarrm10010wbCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.92.6.1.5 | Noderm10010wbCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.92.6.1.5.2 | Scalarrm10010wbCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.92.6.1.5.3 | Scalarrm10010wbCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.92.6.1.5.5 | Scalarrm10010wbCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.92.6.1.5.6 | Scalarrm10010wbCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.92.6.1.6 | Noderm10010wbCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.92.6.1.6.1 | Scalarrm10010wbCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.92.6.1.6.5 | Scalarrm10010wbCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.92.6.1.6.6 | Scalarrm10010wbCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.92.6.1.6.7 | Scalarrm10010wbCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.92.6.1.6.8 | Scalarrm10010wbCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.92.6.1.192 | Noderm10010wbCtrlledTest | |||
| 1.3.6.1.4.1.20044.92.6.1.192.1 | Scalarrm10010wbCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.92.6.1.192.2 | Scalarrm10010wbCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.92.6.1.192.3 | Scalarrm10010wbCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.92.6.1.201 | Noderm10010wbCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.92.6.1.201.1 | Scalarrm10010wbCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.92.6.1.259 | Noderm10010wbCtrlresetCount | |||
| 1.3.6.1.4.1.20044.92.6.1.259.1 | Scalarrm10010wbCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.92.6.1.260 | Noderm10010wbCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.92.6.1.260.1 | Scalarrm10010wbCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.92.6.1.261 | Noderm10010wbCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.92.6.1.261.1 | Scalarrm10010wbCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.92.6.2 | Noderm10010wbCtrlClient | |||
| 1.3.6.1.4.1.20044.92.6.2.16 | Tablerm10010wbCtrlaccessLoopTable | not-accessible | current | List of rm10010wbCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.92.6.2.16.1 | Rowrm10010wbCtrlaccessLoopEntry | not-accessible | current | Row definition for the rm10010wbCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.92.6.2.16.1.1 | Columnrm10010wbCtrlaccessLoopIndex | read-only | current | Index definition for the rm10010wbCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.92.6.2.16.1.2 | Columnrm10010wbCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.92.6.2.17 | Tablerm10010wbCtrlclientLoopToLineTable | not-accessible | current | List of rm10010wbCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.92.6.2.17.1 | Rowrm10010wbCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the rm10010wbCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.92.6.2.17.1.1 | Columnrm10010wbCtrlclientLoopToLineIndex | read-only | current | Index definition for the rm10010wbCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.92.6.2.17.1.2 | Columnrm10010wbCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.92.6.2.21 | Tablerm10010wbCtrlcsfUpInsTable | not-accessible | current | List of rm10010wbCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.92.6.2.21.1 | Rowrm10010wbCtrlcsfUpInsEntry | not-accessible | current | Row definition for the rm10010wbCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.92.6.2.21.1.1 | Columnrm10010wbCtrlcsfUpInsIndex | read-only | current | Index definition for the rm10010wbCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.92.6.2.21.1.2 | Columnrm10010wbCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.92.6.2.22 | Tablerm10010wbCtrlcaisDwInsTable | not-accessible | current | List of rm10010wbCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.92.6.2.22.1 | Rowrm10010wbCtrlcaisDwInsEntry | not-accessible | current | Row definition for the rm10010wbCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.92.6.2.22.1.1 | Columnrm10010wbCtrlcaisDwInsIndex | read-only | current | Index definition for the rm10010wbCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.92.6.2.22.1.2 | Columnrm10010wbCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.92.6.2.262 | Tablerm10010wbCtrlclientResetAllCountTable | not-accessible | current | List of rm10010wbCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.92.6.2.262.1 | Rowrm10010wbCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the rm10010wbCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.92.6.2.262.1.1 | Columnrm10010wbCtrlclientResetAllCountIndex | read-only | current | Index definition for the rm10010wbCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.92.6.2.262.1.2 | Columnrm10010wbCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.92.6.3 | Noderm10010wbCtrlLine | |||
| 1.3.6.1.4.1.20044.92.6.3.64 | Tablerm10010wbCtrlcommAccessLoopTable | not-accessible | current | List of rm10010wbCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.92.6.3.64.1 | Rowrm10010wbCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the rm10010wbCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.92.6.3.64.1.1 | Columnrm10010wbCtrlcommAccessLoopIndex | read-only | current | Index definition for the rm10010wbCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.92.6.3.64.1.2 | Columnrm10010wbCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.92.6.3.66 | Tablerm10010wbCtrllineLoopTable | not-accessible | current | List of rm10010wbCtrllineLoop Article |
| 1.3.6.1.4.1.20044.92.6.3.66.1 | Rowrm10010wbCtrllineLoopEntry | not-accessible | current | Row definition for the rm10010wbCtrllineLoop table |
| 1.3.6.1.4.1.20044.92.6.3.66.1.1 | Columnrm10010wbCtrllineLoopIndex | read-only | current | Index definition for the rm10010wbCtrllineLoop table |
| 1.3.6.1.4.1.20044.92.6.3.66.1.2 | Columnrm10010wbCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.92.6.3.69 | Tablerm10010wbCtrlfecDisableTable | not-accessible | current | List of rm10010wbCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.92.6.3.69.1 | Rowrm10010wbCtrlfecDisableEntry | not-accessible | current | Row definition for the rm10010wbCtrlfecDisable table |
| 1.3.6.1.4.1.20044.92.6.3.69.1.1 | Columnrm10010wbCtrlfecDisableIndex | read-only | current | Index definition for the rm10010wbCtrlfecDisable table |
| 1.3.6.1.4.1.20044.92.6.3.69.1.2 | Columnrm10010wbCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.92.6.3.209 | Tablerm10010wbCtrlmsaLineLoopTable | not-accessible | current | List of rm10010wbCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.92.6.3.209.1 | Rowrm10010wbCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the rm10010wbCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.92.6.3.209.1.1 | Columnrm10010wbCtrlmsaLineLoopIndex | read-only | current | Index definition for the rm10010wbCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.92.6.3.209.1.2 | Columnrm10010wbCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.92.6.3.210 | Tablerm10010wbCtrlmsaRestartTable | not-accessible | current | List of rm10010wbCtrlmsaRestart Article |
| 1.3.6.1.4.1.20044.92.6.3.210.1 | Rowrm10010wbCtrlmsaRestartEntry | not-accessible | current | Row definition for the rm10010wbCtrlmsaRestart table |
| 1.3.6.1.4.1.20044.92.6.3.210.1.1 | Columnrm10010wbCtrlmsaRestartIndex | read-only | current | Index definition for the rm10010wbCtrlmsaRestart table |
| 1.3.6.1.4.1.20044.92.6.3.210.1.2 | Columnrm10010wbCtrlmsaRestartPortn | read-write | current | Force Line Restart :This OID forces the restart of the line after a shutdown due to Line high temperature<Help> This parameter forces the restart of the line a… |
| 1.3.6.1.4.1.20044.92.6.3.263 | Tablerm10010wbCtrllineResetAllCountTable | not-accessible | current | List of rm10010wbCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.92.6.3.263.1 | Rowrm10010wbCtrllineResetAllCountEntry | not-accessible | current | Row definition for the rm10010wbCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.92.6.3.263.1.1 | Columnrm10010wbCtrllineResetAllCountIndex | read-only | current | Index definition for the rm10010wbCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.92.6.3.263.1.2 | Columnrm10010wbCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.92.7 | Noderm10010wbri | |||
| 1.3.6.1.4.1.20044.92.7.1 | Noderm10010wbriTable | |||
| 1.3.6.1.4.1.20044.92.7.1.1 | Tablerm10010wbRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.92.7.1.1.1 | Rowrm10010wbRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.92.7.1.1.1.1 | Columnrm10010wbRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.92.7.1.1.1.2 | Columnrm10010wbRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.92.7.1.2 | Tablerm10010wbRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.92.7.1.2.1 | Rowrm10010wbRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.92.7.1.2.1.1 | Columnrm10010wbRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.92.7.1.2.1.2 | Columnrm10010wbRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.92.7.2 | Scalarrm10010wbRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.92.7.3 | Scalarrm10010wbRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.92.7.4 | Scalarrm10010wbRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.92.7.5 | Scalarrm10010wbRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.92.7.6 | Scalarrm10010wbRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.92.8 | Noderm10010wbdownload | |||
| 1.3.6.1.4.1.20044.92.8.1 | Noderm10010wbDwlOther | |||
| 1.3.6.1.4.1.20044.92.8.1.0 | Noderm10010wbDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.92.8.1.0.1 | Scalarrm10010wbDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.92.8.1.0.2 | Scalarrm10010wbDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.92.8.1.1 | Noderm10010wbDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.92.8.1.1.1 | Scalarrm10010wbDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.92.8.1.1.2 | Scalarrm10010wbDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.92.8.1.1.5 | Scalarrm10010wbDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.92.8.1.1.6 | Scalarrm10010wbDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.92.8.1.2 | Noderm10010wbDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.92.8.1.2.1 | Scalarrm10010wbDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.92.8.1.2.2 | Scalarrm10010wbDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.92.8.1.2.3 | Scalarrm10010wbDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.92.8.1.2.4 | Scalarrm10010wbDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.92.8.1.2.5 | Scalarrm10010wbDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.92.8.1.2.6 | Scalarrm10010wbDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.92.8.1.2.7 | Scalarrm10010wbDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.92.8.1.2.8 | Scalarrm10010wbDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.92.8.2 | Noderm10010wbDwlClient | |||
| 1.3.6.1.4.1.20044.92.8.3 | Noderm10010wbDwlLine | |||
| 1.3.6.1.4.1.20044.92.9 | Noderm10010wbConfig | |||
| 1.3.6.1.4.1.20044.92.9.1 | Noderm10010wbCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.92.9.1.1 | Tablerm10010wbCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.1.1.1 | Rowrm10010wbCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.92.9.1.1.1.1 | Columnrm10010wbCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.92.9.1.1.1.3 | Columnrm10010wbCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.92.9.2 | Noderm10010wbCfgStartup | |||
| 1.3.6.1.4.1.20044.92.9.2.1 | Tablerm10010wbCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.2.1.1 | Rowrm10010wbCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.92.9.2.1.1.1 | Columnrm10010wbCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.92.9.2.1.1.3 | Columnrm10010wbCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.92.9.2.1.1.4 | Columnrm10010wbCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.92.9.2.1.1.14 | Columnrm10010wbCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.92.9.2.2 | Tablerm10010wbCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.2.2.1 | Rowrm10010wbCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.92.9.2.2.1.1 | Columnrm10010wbCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.92.9.2.2.1.3 | Columnrm10010wbCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.92.9.2.2.1.14 | Columnrm10010wbCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.92.9.2.3 | Tablerm10010wbCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.2.3.1 | Rowrm10010wbCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.92.9.2.3.1.1 | Columnrm10010wbCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.92.9.2.3.1.3 | Columnrm10010wbCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.92.9.3 | Noderm10010wbCfgLabels | |||
| 1.3.6.1.4.1.20044.92.9.3.1 | Tablerm10010wbCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.3.1.1 | Rowrm10010wbCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.92.9.3.1.1.1 | Columnrm10010wbCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.92.9.3.1.1.3 | Columnrm10010wbCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.92.9.3.2 | Tablerm10010wbCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.3.2.1 | Rowrm10010wbCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.92.9.3.2.1.1 | Columnrm10010wbCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.92.9.3.2.1.3 | Columnrm10010wbCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.92.9.4 | Noderm10010wbCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.92.9.4.1 | Tablerm10010wbCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.4.1.1 | Rowrm10010wbCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.92.9.4.1.1.1 | Columnrm10010wbCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.92.9.4.1.1.6 | Columnrm10010wbCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.92.9.4.1.1.7 | Columnrm10010wbCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.92.9.4.1.1.8 | Columnrm10010wbCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.92.9.4.1.1.9 | Columnrm10010wbCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.92.9.4.1.1.10 | Columnrm10010wbCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.92.9.5 | Noderm10010wbCfgOther | |||
| 1.3.6.1.4.1.20044.92.9.5.1 | Noderm10010wbtablemoduleOther | |||
| 1.3.6.1.4.1.20044.92.9.5.1.2 | Scalarrm10010wbCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.92.9.5.1.3 | Scalarrm10010wbCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.92.9.5.1.4 | Scalarrm10010wbCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.92.9.5.1.5 | Scalarrm10010wbCfgprotocolMode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.92.9.6 | Noderm10010wbCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.92.9.6.1 | Tablerm10010wbCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.92.9.6.1.1 | Rowrm10010wbCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.92.9.6.1.1.1 | Columnrm10010wbCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.92.9.6.1.1.3 | Columnrm10010wbCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.92.9.6.1.1.4 | Columnrm10010wbCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.92.9.6.1.1.5 | Columnrm10010wbCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.92.9.6.1.1.6 | Columnrm10010wbCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.92.9.6.1.1.7 | Columnrm10010wbCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.92.9.257 | Scalarrm10010wbCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.92.10 | Noderm10010wbtraps | |||
| 1.3.6.1.4.1.20044.92.10.2 | Scalarrm10010wbtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.92.10.3 | Scalarrm10010wbtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.92.10.4 | Scalarrm10010wbtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.92.10.30 | Notificationrm10010wbLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.92.10.31 | Notificationrm10010wbLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.92.10.32 | Notificationrm10010wbLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.92.10.33 | Notificationrm10010wbLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.92.10.34 | Notificationrm10010wbLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.92.10.35 | Notificationrm10010wbLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.92.10.40 | Notificationrm10010wbClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.92.10.41 | Notificationrm10010wbClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.92.10.42 | Notificationrm10010wbClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.92.10.43 | Notificationrm10010wbClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.92.10.44 | Notificationrm10010wbClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.92.10.45 | Notificationrm10010wbClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.92.10.50 | Notificationrm10010wbPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.92.10.51 | Notificationrm10010wbPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.92.11 | Noderm10010wbMonitoring | |||
| 1.3.6.1.4.1.20044.92.11.1 | Noderm10010wbMonOther | |||
| 1.3.6.1.4.1.20044.92.11.1.3 | Noderm10010wbMonRmon | |||
| 1.3.6.1.4.1.20044.92.11.2 | Noderm10010wbMonClient | |||
| 1.3.6.1.4.1.20044.92.11.2.4 | Noderm10010wbMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.92.11.2.4.16 | Tablerm10010wbMonupRmonBytesCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.16.1 | Rowrm10010wbMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.16.1.1 | Columnrm10010wbMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.16.1.2 | Columnrm10010wbMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.92.11.2.4.16.1.3 | Columnrm10010wbMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.16.1.4 | Columnrm10010wbMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.48 | Tablerm10010wbMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.48.1 | Rowrm10010wbMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.48.1.1 | Columnrm10010wbMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.48.1.2 | Columnrm10010wbMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.92.11.2.4.48.1.3 | Columnrm10010wbMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.48.1.4 | Columnrm10010wbMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.80 | Tablerm10010wbMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.80.1 | Rowrm10010wbMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.80.1.1 | Columnrm10010wbMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.80.1.2 | Columnrm10010wbMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.92.11.2.4.80.1.3 | Columnrm10010wbMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.80.1.4 | Columnrm10010wbMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.112 | Tablerm10010wbMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.112.1 | Rowrm10010wbMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.112.1.1 | Columnrm10010wbMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.112.1.2 | Columnrm10010wbMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.92.11.2.4.112.1.3 | Columnrm10010wbMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.112.1.4 | Columnrm10010wbMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.144 | Tablerm10010wbMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.144.1 | Rowrm10010wbMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.144.1.1 | Columnrm10010wbMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.144.1.2 | Columnrm10010wbMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.92.11.2.4.144.1.3 | Columnrm10010wbMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.144.1.4 | Columnrm10010wbMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.176 | Tablerm10010wbMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.176.1 | Rowrm10010wbMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.176.1.1 | Columnrm10010wbMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.176.1.2 | Columnrm10010wbMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.92.11.2.4.176.1.3 | Columnrm10010wbMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.176.1.4 | Columnrm10010wbMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.304 | Tablerm10010wbMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.304.1 | Rowrm10010wbMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.304.1.1 | Columnrm10010wbMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.304.1.2 | Columnrm10010wbMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.92.11.2.4.304.1.3 | Columnrm10010wbMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.304.1.4 | Columnrm10010wbMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.336 | Tablerm10010wbMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of rm10010wbMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.336.1 | Rowrm10010wbMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the rm10010wbMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.336.1.1 | Columnrm10010wbMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the rm10010wbMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.92.11.2.4.336.1.2 | Columnrm10010wbMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.92.11.2.4.336.1.3 | Columnrm10010wbMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.336.1.4 | Columnrm10010wbMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.400 | Tablerm10010wbMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.400.1 | Rowrm10010wbMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.400.1.1 | Columnrm10010wbMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.400.1.2 | Columnrm10010wbMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.92.11.2.4.400.1.3 | Columnrm10010wbMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.400.1.4 | Columnrm10010wbMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.432 | Tablerm10010wbMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.432.1 | Rowrm10010wbMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.432.1.1 | Columnrm10010wbMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.432.1.2 | Columnrm10010wbMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.92.11.2.4.432.1.3 | Columnrm10010wbMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.432.1.4 | Columnrm10010wbMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.464 | Tablerm10010wbMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.464.1 | Rowrm10010wbMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.464.1.1 | Columnrm10010wbMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.464.1.2 | Columnrm10010wbMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.92.11.2.4.464.1.3 | Columnrm10010wbMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.464.1.4 | Columnrm10010wbMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.496 | Tablerm10010wbMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.496.1 | Rowrm10010wbMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.496.1.1 | Columnrm10010wbMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.496.1.2 | Columnrm10010wbMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.92.11.2.4.496.1.3 | Columnrm10010wbMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.496.1.4 | Columnrm10010wbMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.528 | Tablerm10010wbMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.528.1 | Rowrm10010wbMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.528.1.1 | Columnrm10010wbMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.528.1.2 | Columnrm10010wbMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.92.11.2.4.528.1.3 | Columnrm10010wbMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.528.1.4 | Columnrm10010wbMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.560 | Tablerm10010wbMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.560.1 | Rowrm10010wbMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.560.1.1 | Columnrm10010wbMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.560.1.2 | Columnrm10010wbMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.92.11.2.4.560.1.3 | Columnrm10010wbMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.560.1.4 | Columnrm10010wbMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.688 | Tablerm10010wbMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.688.1 | Rowrm10010wbMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.688.1.1 | Columnrm10010wbMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.688.1.2 | Columnrm10010wbMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.92.11.2.4.688.1.3 | Columnrm10010wbMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.688.1.4 | Columnrm10010wbMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.720 | Tablerm10010wbMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of rm10010wbMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.92.11.2.4.720.1 | Rowrm10010wbMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm10010wbMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.720.1.1 | Columnrm10010wbMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the rm10010wbMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.92.11.2.4.720.1.2 | Columnrm10010wbMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.92.11.2.4.720.1.3 | Columnrm10010wbMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.92.11.2.4.720.1.4 | Columnrm10010wbMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.92.11.5 | Noderm10010wbMonPerfOther | |||
| 1.3.6.1.4.1.20044.92.11.5.1 | Noderm10010wbMonPerfSync | |||
| 1.3.6.1.4.1.20044.92.11.5.1.257 | Scalarrm10010wbPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.92.11.5.1.259 | Scalarrm10010wbPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.92.11.5.1.260 | Scalarrm10010wbPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.92.11.5.2 | Noderm10010wbMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.92.11.5.2.1 | Scalarrm10010wbPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.92.11.5.2.2 | Scalarrm10010wbPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.92.11.5.2.5 | Scalarrm10010wbPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.92.11.5.2.6 | Scalarrm10010wbPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.92.11.5.2.7 | Scalarrm10010wbPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.92.11.5.2.8 | Scalarrm10010wbPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.92.11.6 | Noderm10010wbMonPerfClient | |||
| 1.3.6.1.4.1.20044.92.11.6.16 | Tablerm10010wbPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of rm10010wbPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.92.11.6.16.1 | Rowrm10010wbPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.6.16.1.1 | Columnrm10010wbPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.6.16.1.2 | Columnrm10010wbPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.16.1.3 | Columnrm10010wbPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.16.1.4 | Columnrm10010wbPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.16.1.5 | Columnrm10010wbPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.16.1.6 | Columnrm10010wbPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.16.1.7 | Columnrm10010wbPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.16.1.8 | Columnrm10010wbPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.16.1.9 | Columnrm10010wbPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.16.1.10 | Columnrm10010wbPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.16.1.11 | Columnrm10010wbPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.48 | Tablerm10010wbPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.6.48.1 | Rowrm10010wbPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.48.1.1 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.48.1.2 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.48.1.3 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.48.1.4 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.48.1.5 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.48.1.6 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.48.1.7 | Columnrm10010wbPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.48.1.8 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.48.1.9 | Columnrm10010wbPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.48.1.10 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.48.1.11 | Columnrm10010wbPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.80 | Tablerm10010wbPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of rm10010wbPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.92.11.6.80.1 | Rowrm10010wbPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.6.80.1.1 | Columnrm10010wbPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.6.80.1.2 | Columnrm10010wbPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.80.1.3 | Columnrm10010wbPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.80.1.4 | Columnrm10010wbPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.80.1.5 | Columnrm10010wbPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.80.1.6 | Columnrm10010wbPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.80.1.7 | Columnrm10010wbPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.80.1.8 | Columnrm10010wbPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.80.1.9 | Columnrm10010wbPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.80.1.10 | Columnrm10010wbPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.80.1.11 | Columnrm10010wbPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.112 | Tablerm10010wbPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.6.112.1 | Rowrm10010wbPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.112.1.1 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.112.1.2 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.112.1.3 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.112.1.4 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.112.1.5 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.112.1.6 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.112.1.7 | Columnrm10010wbPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.112.1.8 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.112.1.9 | Columnrm10010wbPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.112.1.10 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.112.1.11 | Columnrm10010wbPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.144 | Tablerm10010wbPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of rm10010wbPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.92.11.6.144.1 | Rowrm10010wbPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.6.144.1.1 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.6.144.1.2 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.144.1.3 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.144.1.4 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.144.1.5 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.144.1.6 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.144.1.7 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.144.1.8 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.144.1.9 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.144.1.10 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.144.1.11 | Columnrm10010wbPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.176 | Tablerm10010wbPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.6.176.1 | Rowrm10010wbPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.176.1.1 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.176.1.2 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.176.1.3 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.176.1.4 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.176.1.5 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.176.1.6 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.176.1.7 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.176.1.8 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.176.1.9 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.176.1.10 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.176.1.11 | Columnrm10010wbPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.208 | Tablerm10010wbPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of rm10010wbPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.92.11.6.208.1 | Rowrm10010wbPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.6.208.1.1 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.6.208.1.2 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.208.1.3 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.208.1.4 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.208.1.5 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.208.1.6 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.208.1.7 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.208.1.8 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.208.1.9 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.208.1.10 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.208.1.11 | Columnrm10010wbPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.240 | Tablerm10010wbPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.6.240.1 | Rowrm10010wbPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.240.1.1 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.240.1.2 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.240.1.3 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.6.240.1.4 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.240.1.5 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.240.1.6 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.240.1.7 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.240.1.8 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.240.1.9 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.240.1.10 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.240.1.11 | Columnrm10010wbPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.6.848 | Tablerm10010wbPerfDatacomClientCurrent15StatTable | not-accessible | current | List of rm10010wbPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.92.11.6.848.1 | Rowrm10010wbPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the rm10010wbPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.6.848.1.1 | Columnrm10010wbPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the rm10010wbPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.6.848.1.4 | Columnrm10010wbperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.848.1.5 | Columnrm10010wbperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.848.1.6 | Columnrm10010wbperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.848.1.7 | Columnrm10010wbperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.92.11.6.848.1.28 | Columnrm10010wbperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.848.1.29 | Columnrm10010wbperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.848.1.30 | Columnrm10010wbperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.848.1.31 | Columnrm10010wbperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.92.11.6.880 | Tablerm10010wbPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.6.880.1 | Rowrm10010wbPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.880.1.1 | Columnrm10010wbPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.880.1.4 | Columnrm10010wbperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.880.1.5 | Columnrm10010wbperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.880.1.6 | Columnrm10010wbperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.880.1.7 | Columnrm10010wbperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.92.11.6.880.1.28 | Columnrm10010wbperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.880.1.29 | Columnrm10010wbperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.880.1.30 | Columnrm10010wbperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.880.1.31 | Columnrm10010wbperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.92.11.6.912 | Tablerm10010wbPerfDatacomClientCurrent24StatTable | not-accessible | current | List of rm10010wbPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.92.11.6.912.1 | Rowrm10010wbPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the rm10010wbPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.6.912.1.1 | Columnrm10010wbPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the rm10010wbPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.6.912.1.4 | Columnrm10010wbperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.912.1.5 | Columnrm10010wbperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.912.1.6 | Columnrm10010wbperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.912.1.7 | Columnrm10010wbperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.92.11.6.912.1.28 | Columnrm10010wbperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.912.1.29 | Columnrm10010wbperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.912.1.30 | Columnrm10010wbperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.912.1.31 | Columnrm10010wbperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.92.11.6.944 | Tablerm10010wbPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.6.944.1 | Rowrm10010wbPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.944.1.1 | Columnrm10010wbPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.6.944.1.4 | Columnrm10010wbperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.944.1.5 | Columnrm10010wbperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.944.1.6 | Columnrm10010wbperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.944.1.7 | Columnrm10010wbperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.92.11.6.944.1.28 | Columnrm10010wbperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.944.1.29 | Columnrm10010wbperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.92.11.6.944.1.30 | Columnrm10010wbperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.92.11.6.944.1.31 | Columnrm10010wbperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.92.11.7 | Noderm10010wbMonPerfLine | |||
| 1.3.6.1.4.1.20044.92.11.7.336 | Tablerm10010wbPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of rm10010wbPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.92.11.7.336.1 | Rowrm10010wbPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.7.336.1.1 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.7.336.1.2 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.336.1.3 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.336.1.4 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.336.1.5 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.336.1.6 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.336.1.7 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.336.1.8 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.336.1.9 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.336.1.10 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.336.1.11 | Columnrm10010wbPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.337 | Tablerm10010wbPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.7.337.1 | Rowrm10010wbPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.337.1.1 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.337.1.2 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.337.1.3 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.337.1.4 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.337.1.5 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.337.1.6 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.337.1.7 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.337.1.8 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.337.1.9 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.337.1.10 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.337.1.11 | Columnrm10010wbPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.338 | Tablerm10010wbPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of rm10010wbPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.92.11.7.338.1 | Rowrm10010wbPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.7.338.1.1 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.7.338.1.2 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.338.1.3 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.338.1.4 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.338.1.5 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.338.1.6 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.338.1.7 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.338.1.8 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.338.1.9 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.338.1.10 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.338.1.11 | Columnrm10010wbPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.339 | Tablerm10010wbPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.7.339.1 | Rowrm10010wbPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.339.1.1 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.339.1.2 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.339.1.3 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.339.1.4 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.339.1.5 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.339.1.6 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.339.1.7 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.339.1.8 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.339.1.9 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.339.1.10 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.339.1.11 | Columnrm10010wbPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.352 | Tablerm10010wbPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of rm10010wbPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.92.11.7.352.1 | Rowrm10010wbPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.7.352.1.1 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.92.11.7.352.1.2 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.352.1.3 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.352.1.4 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.352.1.5 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.352.1.6 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.352.1.7 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.353 | Tablerm10010wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.7.353.1 | Rowrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.353.1.1 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.353.1.2 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.353.1.3 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.353.1.4 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.353.1.5 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.353.1.6 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.353.1.7 | Columnrm10010wbPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.354 | Tablerm10010wbPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of rm10010wbPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.92.11.7.354.1 | Rowrm10010wbPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the rm10010wbPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.7.354.1.1 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the rm10010wbPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.92.11.7.354.1.2 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.354.1.3 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.354.1.4 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.354.1.5 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.354.1.6 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.354.1.7 | Columnrm10010wbPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.355 | Tablerm10010wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of rm10010wbPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.92.11.7.355.1 | Rowrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm10010wbPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.355.1.1 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm10010wbPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.92.11.7.355.1.2 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.355.1.3 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.92.11.7.355.1.4 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.355.1.5 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.92.11.7.355.1.6 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.92.11.7.355.1.7 | Columnrm10010wbPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Rm10010wbClientProtocolA | INTEGER { protocolclientvalue0A(1), protocolclientvalue1A(2), protocolclientvalue2A(3) } | current | Different values on the protocol on the client ports |
| Rm10010wbClientProtocolB | INTEGER { protocolclientvalue0B(1), protocolclientvalue1B(2), protocolclientvalue2B(3), protocolclientvalue3B(4), protocolclientvalue4B(5) } | current | Different values on the protocol on the client ports |
| Rm10010wbClientProtocolC | INTEGER { protocolclientvalue0C(1) } | current | Different values on the protocol on the client ports |
| Rm10010wbDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Rm10010wbOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Rm10010wbOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Rm10010wbOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Rm10010wbProtocolMode | INTEGER { protocolmodevalue0(1), protocolmodevalue1(2), protocolmodevalue2(3) } | current | Different values on the protocol mode |