EKINOPS-Rm200frs02wb-MIB
884 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.105 | IdentitymoduleRm200frs02wb | Creation. | ||
| 1.3.6.1.4.1.20044.105.2 | Noderm200frs02wbalarms | |||
| 1.3.6.1.4.1.20044.105.2.1 | Noderm200frs02wbAlmOther | |||
| 1.3.6.1.4.1.20044.105.2.1.1 | Noderm200frs02wbAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.105.2.1.1.2 | Noderm200frs02wbAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.105.2.1.1.2.1 | Scalarrm200frs02wbAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.105.2.1.1.2.2 | Scalarrm200frs02wbAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.105.2.1.1.2.3 | Scalarrm200frs02wbAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.105.2.1.1.2.4 | Scalarrm200frs02wbAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.105.2.1.1.2.5 | Scalarrm200frs02wbAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.105.2.1.1.338 | Noderm200frs02wbAlmclientQsfpWarnDdm | |||
| 1.3.6.1.4.1.20044.105.2.1.1.338.1 | Scalarrm200frs02wbAlmTrscv1VccLowWng1 | read-only | current | Q1 Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.105.2.1.1.338.2 | Scalarrm200frs02wbAlmTrscv1VccHighWng1 | read-only | current | Q1 Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.105.2.1.1.338.3 | Scalarrm200frs02wbAlmTrscv1TempLowWng1 | read-only | current | Q1 Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicatin… |
| 1.3.6.1.4.1.20044.105.2.1.1.338.4 | Scalarrm200frs02wbAlmTrscv1TempHighWng1 | read-only | current | Q1 Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicat… |
| 1.3.6.1.4.1.20044.105.2.1.1.338.5 | Scalarrm200frs02wbAlmTrscv2VccLowWng1 | read-only | current | Q2 Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.105.2.1.1.338.6 | Scalarrm200frs02wbAlmTrscv2VccHighWng1 | read-only | current | Q2 Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.105.2.1.1.338.7 | Scalarrm200frs02wbAlmTrscv2TempLowWng1 | read-only | current | Q2 Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicatin… |
| 1.3.6.1.4.1.20044.105.2.1.1.338.8 | Scalarrm200frs02wbAlmTrscv2TempHighWng1 | read-only | current | Q2 Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicat… |
| 1.3.6.1.4.1.20044.105.2.1.2 | Noderm200frs02wbAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.105.2.1.2.337 | Noderm200frs02wbAlmclientQsfpAlarmDdm | |||
| 1.3.6.1.4.1.20044.105.2.1.2.337.1 | Scalarrm200frs02wbAlmTrscv1VccLowAla1 | read-only | current | Q1 Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.105.2.1.2.337.2 | Scalarrm200frs02wbAlmTrscv1VccHighAla1 | read-only | current | Q1 Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.105.2.1.2.337.3 | Scalarrm200frs02wbAlmTrscv1TempLowAla1 | read-only | current | Q1 Trscv Temp Low Alarm :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.105.2.1.2.337.4 | Scalarrm200frs02wbAlmTrscv1TempHighAla | read-only | current | Q1 Trscv Temp High Alarm :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.105.2.1.2.337.5 | Scalarrm200frs02wbAlmTrscv2VccLowAla1 | read-only | current | Q2 Trscv Power Supply Low Alarm :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.105.2.1.2.337.6 | Scalarrm200frs02wbAlmTrscv2VccHighAla1 | read-only | current | Q2 Trscv Power Supply High Alarm :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.105.2.1.2.337.7 | Scalarrm200frs02wbAlmTrscv2TempLowAla1 | read-only | current | Q2 Trscv Temp Low Alarm :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.105.2.1.2.337.8 | Scalarrm200frs02wbAlmTrscv2TempHighAla1 | read-only | current | Q2 Trscv Temp High Alarm :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.105.2.1.3 | Noderm200frs02wbAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.105.2.1.3.0 | Noderm200frs02wbAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.105.2.1.3.0.2 | Scalarrm200frs02wbAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.105.2.1.3.0.9 | Scalarrm200frs02wbAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.105.2.1.3.0.15 | Scalarrm200frs02wbAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.105.2.1.3.0.16 | Scalarrm200frs02wbAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.105.2.1.3.78 | Noderm200frs02wbAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.105.2.1.3.78.1 | Scalarrm200frs02wbAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.2 | Scalarrm200frs02wbAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.3 | Scalarrm200frs02wbAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.4 | Scalarrm200frs02wbAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.5 | Scalarrm200frs02wbAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.105.2.1.3.78.6 | Scalarrm200frs02wbAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.7 | Scalarrm200frs02wbAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.8 | Scalarrm200frs02wbAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.9 | Scalarrm200frs02wbAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.13 | Scalarrm200frs02wbAlmMsaTempShutdown | read-only | current | Line Trscv Temperature Shutdown :This OID indicates a Trscv shutdown caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature shutdow… |
| 1.3.6.1.4.1.20044.105.2.1.3.78.14 | Scalarrm200frs02wbAlmMsaTempWarning | read-only | current | Line Trscv Temperature Warning :This OID indicates a Trscv warning caused by a temperature is out of range<Help> Warning indicating a Trscv temperature out of … |
| 1.3.6.1.4.1.20044.105.2.1.3.78.15 | Scalarrm200frs02wbAlmMsaTempAlarm | read-only | current | Line Trscv Temperature Alarm :This OID indicates a Trscv alarm caused by a temperature is out of range<Help> Alarm indicating a Trscv temperature out of range … |
| 1.3.6.1.4.1.20044.105.2.2 | Noderm200frs02wbAlmClient | |||
| 1.3.6.1.4.1.20044.105.2.2.1 | Noderm200frs02wbAlmClientNurg | |||
| 1.3.6.1.4.1.20044.105.2.2.2 | Noderm200frs02wbAlmClientUrg | |||
| 1.3.6.1.4.1.20044.105.2.2.2.152 | Tablerm200frs02wbAlmclientHostLaneFaultTable | not-accessible | current | List of rm200frs02wbAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1 | Rowrm200frs02wbAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the rm200frs02wbAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.1 | Columnrm200frs02wbAlmclientHostLaneFaultIndex | read-only | current | Index definition for the rm200frs02wbAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.2 | Columnrm200frs02wbAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.3 | Columnrm200frs02wbAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.4 | Columnrm200frs02wbAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.5 | Columnrm200frs02wbAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.6 | Columnrm200frs02wbAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.7 | Columnrm200frs02wbAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.10 | Columnrm200frs02wbAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.105.2.2.2.152.1.11 | Columnrm200frs02wbAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.105.2.2.3 | Noderm200frs02wbAlmClientCrit | |||
| 1.3.6.1.4.1.20044.105.2.2.3.8 | Tablerm200frs02wbAlmsynthAlmPortTable | not-accessible | current | List of rm200frs02wbAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1 | Rowrm200frs02wbAlmsynthAlmPortEntry | not-accessible | current | Row definition for the rm200frs02wbAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.1 | Columnrm200frs02wbAlmsynthAlmPortIndex | read-only | current | Index definition for the rm200frs02wbAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.2 | Columnrm200frs02wbAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.3 | Columnrm200frs02wbAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.5 | Columnrm200frs02wbAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.6 | Columnrm200frs02wbAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.7 | Columnrm200frs02wbAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.8 | Columnrm200frs02wbAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.9 | Columnrm200frs02wbAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.10 | Columnrm200frs02wbAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.11 | Columnrm200frs02wbAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.13 | Columnrm200frs02wbAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.105.2.2.3.8.1.17 | Columnrm200frs02wbAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.105.2.3 | Noderm200frs02wbAlmLine | |||
| 1.3.6.1.4.1.20044.105.2.3.1 | Noderm200frs02wbAlmLineNurg | |||
| 1.3.6.1.4.1.20044.105.2.3.1.184 | Tablerm200frs02wbAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of rm200frs02wbAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1 | Rowrm200frs02wbAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the rm200frs02wbAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.1 | Columnrm200frs02wbAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the rm200frs02wbAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.2 | Columnrm200frs02wbAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.3 | Columnrm200frs02wbAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.4 | Columnrm200frs02wbAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.5 | Columnrm200frs02wbAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.6 | Columnrm200frs02wbAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.7 | Columnrm200frs02wbAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.8 | Columnrm200frs02wbAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.9 | Columnrm200frs02wbAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.10 | Columnrm200frs02wbAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.11 | Columnrm200frs02wbAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.12 | Columnrm200frs02wbAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.13 | Columnrm200frs02wbAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.14 | Columnrm200frs02wbAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.15 | Columnrm200frs02wbAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.16 | Columnrm200frs02wbAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.105.2.3.1.184.1.17 | Columnrm200frs02wbAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.105.2.3.1.188 | Tablerm200frs02wbAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of rm200frs02wbAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1 | Rowrm200frs02wbAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the rm200frs02wbAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.1 | Columnrm200frs02wbAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the rm200frs02wbAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.2 | Columnrm200frs02wbAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.3 | Columnrm200frs02wbAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.4 | Columnrm200frs02wbAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.5 | Columnrm200frs02wbAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.6 | Columnrm200frs02wbAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.7 | Columnrm200frs02wbAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.8 | Columnrm200frs02wbAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.9 | Columnrm200frs02wbAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.10 | Columnrm200frs02wbAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.11 | Columnrm200frs02wbAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.12 | Columnrm200frs02wbAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.13 | Columnrm200frs02wbAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.14 | Columnrm200frs02wbAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.15 | Columnrm200frs02wbAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.16 | Columnrm200frs02wbAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.105.2.3.1.188.1.17 | Columnrm200frs02wbAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.105.2.3.2 | Noderm200frs02wbAlmLineUrg | |||
| 1.3.6.1.4.1.20044.105.2.3.2.196 | Tablerm200frs02wbAlmlineHostLaneFaultTable | not-accessible | current | List of rm200frs02wbAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1 | Rowrm200frs02wbAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the rm200frs02wbAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.1 | Columnrm200frs02wbAlmlineHostLaneFaultIndex | read-only | current | Index definition for the rm200frs02wbAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.2 | Columnrm200frs02wbAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.3 | Columnrm200frs02wbAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.4 | Columnrm200frs02wbAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.5 | Columnrm200frs02wbAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.6 | Columnrm200frs02wbAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.7 | Columnrm200frs02wbAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.10 | Columnrm200frs02wbAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.105.2.3.2.196.1.11 | Columnrm200frs02wbAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.105.2.3.3 | Noderm200frs02wbAlmLineCrit | |||
| 1.3.6.1.4.1.20044.105.2.3.3.40 | Tablerm200frs02wbAlmsynthAlmLineTable | not-accessible | current | List of rm200frs02wbAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1 | Rowrm200frs02wbAlmsynthAlmLineEntry | not-accessible | current | Row definition for the rm200frs02wbAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.1 | Columnrm200frs02wbAlmsynthAlmLineIndex | read-only | current | Index definition for the rm200frs02wbAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.2 | Columnrm200frs02wbAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.3 | Columnrm200frs02wbAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.5 | Columnrm200frs02wbAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.6 | Columnrm200frs02wbAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.7 | Columnrm200frs02wbAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.9 | Columnrm200frs02wbAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.10 | Columnrm200frs02wbAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.11 | Columnrm200frs02wbAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.13 | Columnrm200frs02wbAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.105.2.3.3.40.1.17 | Columnrm200frs02wbAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.105.3 | Noderm200frs02wbmeasures | |||
| 1.3.6.1.4.1.20044.105.3.1 | Noderm200frs02wbMesrOther | |||
| 1.3.6.1.4.1.20044.105.3.1.0 | Scalarrm200frs02wbMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.105.3.1.1 | Scalarrm200frs02wbMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.105.3.1.7 | Scalarrm200frs02wbMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.105.3.1.196 | Scalarrm200frs02wbMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.105.3.1.197 | Scalarrm200frs02wbMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.105.3.1.198 | Scalarrm200frs02wbMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.105.3.1.199 | Scalarrm200frs02wbMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.105.3.1.200 | Scalarrm200frs02wbMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion … |
| 1.3.6.1.4.1.20044.105.3.1.201 | Scalarrm200frs02wbMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = ps)<Help> … |
| 1.3.6.1.4.1.20044.105.3.1.202 | Scalarrm200frs02wbMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB) <Help> This measure gi… |
| 1.3.6.1.4.1.20044.105.3.1.203 | Scalarrm200frs02wbMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Uni… |
| 1.3.6.1.4.1.20044.105.3.1.204 | Scalarrm200frs02wbMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the av… |
| 1.3.6.1.4.1.20044.105.3.1.212 | Scalarrm200frs02wbMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.105.3.1.213 | Scalarrm200frs02wbMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.105.3.1.214 | Scalarrm200frs02wbMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.105.3.1.215 | Scalarrm200frs02wbMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.105.3.1.216 | Scalarrm200frs02wbMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.105.3.1.217 | Scalarrm200frs02wbMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.105.3.1.218 | Scalarrm200frs02wbMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.105.3.1.219 | Scalarrm200frs02wbMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.105.3.1.220 | Scalarrm200frs02wbMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the minimu… |
| 1.3.6.1.4.1.20044.105.3.1.228 | Scalarrm200frs02wbMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.105.3.1.229 | Scalarrm200frs02wbMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.105.3.1.230 | Scalarrm200frs02wbMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.105.3.1.231 | Scalarrm200frs02wbMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.105.3.1.232 | Scalarrm200frs02wbMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.105.3.1.233 | Scalarrm200frs02wbMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.105.3.1.234 | Scalarrm200frs02wbMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.105.3.1.235 | Scalarrm200frs02wbMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.105.3.1.236 | Scalarrm200frs02wbMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the maximu… |
| 1.3.6.1.4.1.20044.105.3.1.249 | Scalarrm200frs02wbMesrregVoltage | read-only | current | Regulator Voltage :This OID gives the voltage value of the Regulator (Voltage = AV_U16) (Unit = mV) <Help> This Measure gives the Regulator Voltage |
| 1.3.6.1.4.1.20044.105.3.1.250 | Scalarrm200frs02wbMesrregCurrent | read-only | current | Regulator Current :This OID gives the current value of the Regulator (Current = AV_U16/1000) (Unit = A) <Help> This Measure gives the Regulator Current |
| 1.3.6.1.4.1.20044.105.3.1.251 | Scalarrm200frs02wbMesrregTemp | read-only | current | Regulator Temperature :This OID gives the temperature value of the Regulator (Temperature = AV_S16) (Unit = C) <Help> This Measure gives the Regulator Temperat… |
| 1.3.6.1.4.1.20044.105.3.1.252 | Scalarrm200frs02wbMesrtrscv1Temp | read-only | current | Q1 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Un… |
| 1.3.6.1.4.1.20044.105.3.1.253 | Scalarrm200frs02wbMesrtrscv2Temp | read-only | current | Q2 Trscv Temperature :This OID gives the temperature value of the Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Un… |
| 1.3.6.1.4.1.20044.105.3.1.254 | Scalarrm200frs02wbMesrtrscv1PowerSupply | read-only | current | Q1 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.105.3.1.255 | Scalarrm200frs02wbMesrtrscv2PowerSupply | read-only | current | Q2 Trscv Voltage :This OID gives the voltage value of the QSFP plugged into the port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.105.3.1.500 | Scalarrm200frs02wbMesrmoduleTempMin | read-only | current | Min Module Temperature :This OID gives the minimum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the minimum … |
| 1.3.6.1.4.1.20044.105.3.1.501 | Scalarrm200frs02wbMesrmoduleTempMax | read-only | current | Max Module Temperature :This OID gives the maximum temperature value of the Module (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the maximum … |
| 1.3.6.1.4.1.20044.105.3.2 | Noderm200frs02wbMesrClient | |||
| 1.3.6.1.4.1.20044.105.3.2.8 | Scalarrm200frs02wbMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S… |
| 1.3.6.1.4.1.20044.105.3.2.9 | Scalarrm200frs02wbMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.105.3.2.10 | Scalarrm200frs02wbMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit… |
| 1.3.6.1.4.1.20044.105.3.2.16 | Tablerm200frs02wbMesrclientTxPwrMinTable | not-accessible | current | List of rm200frs02wbMesrclientTxPwrMin Article |
| 1.3.6.1.4.1.20044.105.3.2.16.1 | Rowrm200frs02wbMesrclientTxPwrMinEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientTxPwrMin table |
| 1.3.6.1.4.1.20044.105.3.2.16.1.1 | Columnrm200frs02wbMesrclientTxPwrMinIndex | read-only | current | Index definition for the rm200frs02wbMesrclientTxPwrMin table |
| 1.3.6.1.4.1.20044.105.3.2.16.1.2 | Columnrm200frs02wbMesrclientTxPwrMinPortn | read-only | current | Min Client Trscv Tx Power Per Lane :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit… |
| 1.3.6.1.4.1.20044.105.3.2.48 | Tablerm200frs02wbMesrclientRxPwrMinTable | not-accessible | current | List of rm200frs02wbMesrclientRxPwrMin Article |
| 1.3.6.1.4.1.20044.105.3.2.48.1 | Rowrm200frs02wbMesrclientRxPwrMinEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientRxPwrMin table |
| 1.3.6.1.4.1.20044.105.3.2.48.1.1 | Columnrm200frs02wbMesrclientRxPwrMinIndex | read-only | current | Index definition for the rm200frs02wbMesrclientRxPwrMin table |
| 1.3.6.1.4.1.20044.105.3.2.48.1.2 | Columnrm200frs02wbMesrclientRxPwrMinPortn | read-only | current | Min Client Trscv Rx Power Per Lane :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read from the DDM (Digita… |
| 1.3.6.1.4.1.20044.105.3.2.80 | Tablerm200frs02wbMesrclientTxPwrMaxTable | not-accessible | current | List of rm200frs02wbMesrclientTxPwrMax Article |
| 1.3.6.1.4.1.20044.105.3.2.80.1 | Rowrm200frs02wbMesrclientTxPwrMaxEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientTxPwrMax table |
| 1.3.6.1.4.1.20044.105.3.2.80.1.1 | Columnrm200frs02wbMesrclientTxPwrMaxIndex | read-only | current | Index definition for the rm200frs02wbMesrclientTxPwrMax table |
| 1.3.6.1.4.1.20044.105.3.2.80.1.2 | Columnrm200frs02wbMesrclientTxPwrMaxPortn | read-only | current | Max Client Trscv Tx Power Per Lane :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digit… |
| 1.3.6.1.4.1.20044.105.3.2.112 | Tablerm200frs02wbMesrclientRxPwrMaxTable | not-accessible | current | List of rm200frs02wbMesrclientRxPwrMax Article |
| 1.3.6.1.4.1.20044.105.3.2.112.1 | Rowrm200frs02wbMesrclientRxPwrMaxEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientRxPwrMax table |
| 1.3.6.1.4.1.20044.105.3.2.112.1.1 | Columnrm200frs02wbMesrclientRxPwrMaxIndex | read-only | current | Index definition for the rm200frs02wbMesrclientRxPwrMax table |
| 1.3.6.1.4.1.20044.105.3.2.112.1.2 | Columnrm200frs02wbMesrclientRxPwrMaxPortn | read-only | current | Max Client Trscv Rx Power Per Lane :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital … |
| 1.3.6.1.4.1.20044.105.3.2.256 | Tablerm200frs02wbMesrclientTxCompositePwrTable | not-accessible | current | List of rm200frs02wbMesrclientTxCompositePwr Article |
| 1.3.6.1.4.1.20044.105.3.2.256.1 | Rowrm200frs02wbMesrclientTxCompositePwrEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.105.3.2.256.1.1 | Columnrm200frs02wbMesrclientTxCompositePwrIndex | read-only | current | Index definition for the rm200frs02wbMesrclientTxCompositePwr table |
| 1.3.6.1.4.1.20044.105.3.2.256.1.2 | Columnrm200frs02wbMesrclientTxCompositePwrPortn | read-only | current | Client Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from… |
| 1.3.6.1.4.1.20044.105.3.2.288 | Tablerm200frs02wbMesrclientRxCompositePwrTable | not-accessible | current | List of rm200frs02wbMesrclientRxCompositePwr Article |
| 1.3.6.1.4.1.20044.105.3.2.288.1 | Rowrm200frs02wbMesrclientRxCompositePwrEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.105.3.2.288.1.1 | Columnrm200frs02wbMesrclientRxCompositePwrIndex | read-only | current | Index definition for the rm200frs02wbMesrclientRxCompositePwr table |
| 1.3.6.1.4.1.20044.105.3.2.288.1.2 | Columnrm200frs02wbMesrclientRxCompositePwrPortn | read-only | current | Client Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from t… |
| 1.3.6.1.4.1.20044.105.3.2.416 | Tablerm200frs02wbMesrclientTempMinTable | not-accessible | current | List of rm200frs02wbMesrclientTempMin Article |
| 1.3.6.1.4.1.20044.105.3.2.416.1 | Rowrm200frs02wbMesrclientTempMinEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientTempMin table |
| 1.3.6.1.4.1.20044.105.3.2.416.1.1 | Columnrm200frs02wbMesrclientTempMinIndex | read-only | current | Index definition for the rm200frs02wbMesrclientTempMin table |
| 1.3.6.1.4.1.20044.105.3.2.416.1.2 | Columnrm200frs02wbMesrclientTempMinPortn | read-only | current | Min Client Trscv Temperature :This OID gives the minimum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper… |
| 1.3.6.1.4.1.20044.105.3.2.448 | Tablerm200frs02wbMesrclientTempMaxTable | not-accessible | current | List of rm200frs02wbMesrclientTempMax Article |
| 1.3.6.1.4.1.20044.105.3.2.448.1 | Rowrm200frs02wbMesrclientTempMaxEntry | not-accessible | current | Row definition for the rm200frs02wbMesrclientTempMax table |
| 1.3.6.1.4.1.20044.105.3.2.448.1.1 | Columnrm200frs02wbMesrclientTempMaxIndex | read-only | current | Index definition for the rm200frs02wbMesrclientTempMax table |
| 1.3.6.1.4.1.20044.105.3.2.448.1.2 | Columnrm200frs02wbMesrclientTempMaxPortn | read-only | current | Max Client Trscv Temperature :This OID gives the maximum temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temper… |
| 1.3.6.1.4.1.20044.105.3.3 | Noderm200frs02wbMesrLine | |||
| 1.3.6.1.4.1.20044.105.3.3.12 | Scalarrm200frs02wbMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/2… |
| 1.3.6.1.4.1.20044.105.3.3.13 | Scalarrm200frs02wbMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000) (U… |
| 1.3.6.1.4.1.20044.105.3.3.14 | Scalarrm200frs02wbMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.105.3.3.144 | Tablerm200frs02wbMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of rm200frs02wbMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.105.3.3.144.1 | Rowrm200frs02wbMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.105.3.3.144.1.1 | Columnrm200frs02wbMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the rm200frs02wbMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.105.3.3.144.1.2 | Columnrm200frs02wbMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.105.3.3.148 | Tablerm200frs02wbMesrlineNetTxLaserTempTable | not-accessible | current | List of rm200frs02wbMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.105.3.3.148.1 | Rowrm200frs02wbMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.105.3.3.148.1.1 | Columnrm200frs02wbMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the rm200frs02wbMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.105.3.3.148.1.2 | Columnrm200frs02wbMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.105.3.3.152 | Tablerm200frs02wbMesrlineNetTxBiasCurrentTable | not-accessible | current | List of rm200frs02wbMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.105.3.3.152.1 | Rowrm200frs02wbMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.105.3.3.152.1.1 | Columnrm200frs02wbMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the rm200frs02wbMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.105.3.3.152.1.2 | Columnrm200frs02wbMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_… |
| 1.3.6.1.4.1.20044.105.3.3.156 | Tablerm200frs02wbMesrlineNetRxInputPwrTable | not-accessible | current | List of rm200frs02wbMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.105.3.3.156.1 | Rowrm200frs02wbMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.105.3.3.156.1.1 | Columnrm200frs02wbMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the rm200frs02wbMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.105.3.3.156.1.2 | Columnrm200frs02wbMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/10… |
| 1.3.6.1.4.1.20044.105.3.3.160 | Tablerm200frs02wbMesrlineResidualChromaticDispTable | not-accessible | current | List of rm200frs02wbMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.105.3.3.160.1 | Rowrm200frs02wbMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.105.3.3.160.1.1 | Columnrm200frs02wbMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the rm200frs02wbMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.105.3.3.160.1.2 | Columnrm200frs02wbMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_S16*(-2)) (Unit = ps/nm)… |
| 1.3.6.1.4.1.20044.105.3.3.164 | Tablerm200frs02wbMesrlineDiffGroupDelayTable | not-accessible | current | List of rm200frs02wbMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.105.3.3.164.1 | Rowrm200frs02wbMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.105.3.3.164.1.1 | Columnrm200frs02wbMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the rm200frs02wbMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.105.3.3.164.1.2 | Columnrm200frs02wbMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Delay = AV_S16) (Unit = ps)<Help> This measure giv… |
| 1.3.6.1.4.1.20044.105.3.3.168 | Tablerm200frs02wbMesrlineQFactorTable | not-accessible | current | List of rm200frs02wbMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.105.3.3.168.1 | Rowrm200frs02wbMesrlineQFactorEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineQFactor table |
| 1.3.6.1.4.1.20044.105.3.3.168.1.1 | Columnrm200frs02wbMesrlineQFactorIndex | read-only | current | Index definition for the rm200frs02wbMesrlineQFactor table |
| 1.3.6.1.4.1.20044.105.3.3.168.1.2 | Columnrm200frs02wbMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Q Factor = AV_U16) (Unit = dB) <Help> This measure gives the current Q Factor on t… |
| 1.3.6.1.4.1.20044.105.3.3.172 | Tablerm200frs02wbMesrlineCarrierFreqOffsetTable | not-accessible | current | List of rm200frs02wbMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.105.3.3.172.1 | Rowrm200frs02wbMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.105.3.3.172.1.1 | Columnrm200frs02wbMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the rm200frs02wbMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.105.3.3.172.1.2 | Columnrm200frs02wbMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Offset = AV_S16) (Unit = MHz)<Help> This measure g… |
| 1.3.6.1.4.1.20044.105.3.3.176 | Tablerm200frs02wbMesrlineOsnrTable | not-accessible | current | List of rm200frs02wbMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.105.3.3.176.1 | Rowrm200frs02wbMesrlineOsnrEntry | not-accessible | current | Row definition for the rm200frs02wbMesrlineOsnr table |
| 1.3.6.1.4.1.20044.105.3.3.176.1.1 | Columnrm200frs02wbMesrlineOsnrIndex | read-only | current | Index definition for the rm200frs02wbMesrlineOsnr table |
| 1.3.6.1.4.1.20044.105.3.3.176.1.2 | Columnrm200frs02wbMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interf… |
| 1.3.6.1.4.1.20044.105.3.3.492 | Scalarrm200frs02wbMesrlineTempMin | read-only | current | Min Line Trscv Temperature :This OID gives the minimum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur… |
| 1.3.6.1.4.1.20044.105.3.3.496 | Scalarrm200frs02wbMesrlineTempMax | read-only | current | Max Line Trscv Temperature :This OID gives the maximum temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperatur… |
| 1.3.6.1.4.1.20044.105.4 | Noderm200frs02wbcounters | |||
| 1.3.6.1.4.1.20044.105.4.1 | Noderm200frs02wbCntOther | |||
| 1.3.6.1.4.1.20044.105.4.2 | Noderm200frs02wbCntClient | |||
| 1.3.6.1.4.1.20044.105.4.2.112 | Tablerm200frs02wbCntclientInputErrorCounterTable | not-accessible | current | List of rm200frs02wbCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.105.4.2.112.1 | Rowrm200frs02wbCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.2.112.1.1 | Columnrm200frs02wbCntclientInputErrorCounterIndex | read-only | current | Index definition for the rm200frs02wbCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.2.112.1.2 | Columnrm200frs02wbCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter gives the number of SM-BIP8 on the client port (OTU4 only) <Help> This counter gives the number of SM-BIP8 on the client port… |
| 1.3.6.1.4.1.20044.105.4.2.112.1.3 | Columnrm200frs02wbCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.2.112.1.4 | Columnrm200frs02wbCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a BIP8 error counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.2.144 | Tablerm200frs02wbCntclientCbipCounterTable | not-accessible | current | List of rm200frs02wbCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.105.4.2.144.1 | Rowrm200frs02wbCntclientCbipCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.105.4.2.144.1.1 | Columnrm200frs02wbCntclientCbipCounterIndex | read-only | current | Index definition for the rm200frs02wbCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.105.4.2.144.1.2 | Columnrm200frs02wbCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter gives the number of SM-BIP8 on the client port (OTU4 only) <Help> This counter gives the number of SM-BIP8 on the client por… |
| 1.3.6.1.4.1.20044.105.4.2.144.1.3 | Columnrm200frs02wbCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.2.144.1.4 | Columnrm200frs02wbCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a BIP8 error counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.3 | Noderm200frs02wbCntLine | |||
| 1.3.6.1.4.1.20044.105.4.3.192 | Tablerm200frs02wbCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of rm200frs02wbCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.192.1 | Rowrm200frs02wbCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.192.1.1 | Columnrm200frs02wbCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm200frs02wbCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.192.1.2 | Columnrm200frs02wbCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (resi… |
| 1.3.6.1.4.1.20044.105.4.3.192.1.3 | Columnrm200frs02wbCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.3.192.1.4 | Columnrm200frs02wbCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.3.193 | Tablerm200frs02wbCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of rm200frs02wbCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.193.1 | Rowrm200frs02wbCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.105.4.3.193.1.1 | Columnrm200frs02wbCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the rm200frs02wbCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.105.4.3.193.1.2 | Columnrm200frs02wbCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.105.4.3.193.1.3 | Columnrm200frs02wbCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.105.4.3.193.1.4 | Columnrm200frs02wbCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.105.4.3.194 | Tablerm200frs02wbCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of rm200frs02wbCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.194.1 | Rowrm200frs02wbCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.194.1.1 | Columnrm200frs02wbCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the rm200frs02wbCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.194.1.2 | Columnrm200frs02wbCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.105.4.3.194.1.3 | Columnrm200frs02wbCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.105.4.3.194.1.4 | Columnrm200frs02wbCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.105.4.3.195 | Tablerm200frs02wbCntlineDfrmTimCntTable | not-accessible | current | List of rm200frs02wbCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.105.4.3.195.1 | Rowrm200frs02wbCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the rm200frs02wbCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.105.4.3.195.1.1 | Columnrm200frs02wbCntlineDfrmTimCntIndex | read-only | current | Index definition for the rm200frs02wbCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.105.4.3.195.1.2 | Columnrm200frs02wbCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.105.4.3.195.1.3 | Columnrm200frs02wbCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.3.195.1.4 | Columnrm200frs02wbCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.3.196 | Tablerm200frs02wbCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of rm200frs02wbCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.196.1 | Rowrm200frs02wbCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.196.1.1 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the rm200frs02wbCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.196.1.2 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC |
| 1.3.6.1.4.1.20044.105.4.3.196.1.3 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.3.196.1.4 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.3.197 | Tablerm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of rm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.197.1 | Rowrm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.197.1.1 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the rm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.105.4.3.197.1.2 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate a… |
| 1.3.6.1.4.1.20044.105.4.3.197.1.3 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.3.197.1.4 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.3.198 | Tablerm200frs02wbCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of rm200frs02wbCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.198.1 | Rowrm200frs02wbCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.105.4.3.198.1.1 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the rm200frs02wbCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.105.4.3.198.1.2 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.105.4.3.198.1.3 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.3.198.1.4 | Columnrm200frs02wbCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.105.4.3.199 | Tablerm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of rm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.105.4.3.199.1 | Rowrm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the rm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.105.4.3.199.1.1 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the rm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.105.4.3.199.1.2 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.105.4.3.199.1.3 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.105.4.3.199.1.4 | Columnrm200frs02wbCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.105.6 | Noderm200frs02wbcontrolsWrite | |||
| 1.3.6.1.4.1.20044.105.6.1 | Noderm200frs02wbCtrlOther | |||
| 1.3.6.1.4.1.20044.105.6.1.1 | Noderm200frs02wbCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.105.6.1.1.1 | Scalarrm200frs02wbCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.105.6.1.1.2 | Scalarrm200frs02wbCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.105.6.1.1.10 | Scalarrm200frs02wbCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.105.6.1.1.14 | Scalarrm200frs02wbCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.105.6.1.4 | Noderm200frs02wbCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.105.6.1.4.1 | Scalarrm200frs02wbCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.105.6.1.4.2 | Scalarrm200frs02wbCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.105.6.1.5 | Noderm200frs02wbCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.105.6.1.5.2 | Scalarrm200frs02wbCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.105.6.1.5.3 | Scalarrm200frs02wbCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.105.6.1.5.5 | Scalarrm200frs02wbCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.105.6.1.5.6 | Scalarrm200frs02wbCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.105.6.1.6 | Noderm200frs02wbCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.105.6.1.6.1 | Scalarrm200frs02wbCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.105.6.1.6.5 | Scalarrm200frs02wbCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.105.6.1.6.6 | Scalarrm200frs02wbCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.105.6.1.6.7 | Scalarrm200frs02wbCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.105.6.1.6.8 | Scalarrm200frs02wbCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.105.6.1.192 | Noderm200frs02wbCtrlledTest | |||
| 1.3.6.1.4.1.20044.105.6.1.192.1 | Scalarrm200frs02wbCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.105.6.1.192.2 | Scalarrm200frs02wbCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.105.6.1.192.3 | Scalarrm200frs02wbCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.105.6.1.201 | Noderm200frs02wbCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.105.6.1.201.1 | Scalarrm200frs02wbCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.105.6.1.259 | Noderm200frs02wbCtrlresetCount | |||
| 1.3.6.1.4.1.20044.105.6.1.259.1 | Scalarrm200frs02wbCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.105.6.1.260 | Noderm200frs02wbCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.105.6.1.260.1 | Scalarrm200frs02wbCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.105.6.1.261 | Noderm200frs02wbCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.105.6.1.261.1 | Scalarrm200frs02wbCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.105.6.2 | Noderm200frs02wbCtrlClient | |||
| 1.3.6.1.4.1.20044.105.6.2.16 | Tablerm200frs02wbCtrlaccessLoopTable | not-accessible | current | List of rm200frs02wbCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.105.6.2.16.1 | Rowrm200frs02wbCtrlaccessLoopEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.105.6.2.16.1.1 | Columnrm200frs02wbCtrlaccessLoopIndex | read-only | current | Index definition for the rm200frs02wbCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.105.6.2.16.1.2 | Columnrm200frs02wbCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.105.6.2.17 | Tablerm200frs02wbCtrlclientLoopToLineTable | not-accessible | current | List of rm200frs02wbCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.105.6.2.17.1 | Rowrm200frs02wbCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.105.6.2.17.1.1 | Columnrm200frs02wbCtrlclientLoopToLineIndex | read-only | current | Index definition for the rm200frs02wbCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.105.6.2.17.1.2 | Columnrm200frs02wbCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.105.6.2.21 | Tablerm200frs02wbCtrlcsfUpInsTable | not-accessible | current | List of rm200frs02wbCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.105.6.2.21.1 | Rowrm200frs02wbCtrlcsfUpInsEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.105.6.2.21.1.1 | Columnrm200frs02wbCtrlcsfUpInsIndex | read-only | current | Index definition for the rm200frs02wbCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.105.6.2.21.1.2 | Columnrm200frs02wbCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.105.6.2.22 | Tablerm200frs02wbCtrlcaisDwInsTable | not-accessible | current | List of rm200frs02wbCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.105.6.2.22.1 | Rowrm200frs02wbCtrlcaisDwInsEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.105.6.2.22.1.1 | Columnrm200frs02wbCtrlcaisDwInsIndex | read-only | current | Index definition for the rm200frs02wbCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.105.6.2.22.1.2 | Columnrm200frs02wbCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.105.6.2.262 | Tablerm200frs02wbCtrlclientResetAllCountTable | not-accessible | current | List of rm200frs02wbCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.105.6.2.262.1 | Rowrm200frs02wbCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.105.6.2.262.1.1 | Columnrm200frs02wbCtrlclientResetAllCountIndex | read-only | current | Index definition for the rm200frs02wbCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.105.6.2.262.1.2 | Columnrm200frs02wbCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.105.6.3 | Noderm200frs02wbCtrlLine | |||
| 1.3.6.1.4.1.20044.105.6.3.64 | Tablerm200frs02wbCtrlcommAccessLoopTable | not-accessible | current | List of rm200frs02wbCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.105.6.3.64.1 | Rowrm200frs02wbCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.105.6.3.64.1.1 | Columnrm200frs02wbCtrlcommAccessLoopIndex | read-only | current | Index definition for the rm200frs02wbCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.105.6.3.64.1.2 | Columnrm200frs02wbCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.105.6.3.66 | Tablerm200frs02wbCtrllineLoopTable | not-accessible | current | List of rm200frs02wbCtrllineLoop Article |
| 1.3.6.1.4.1.20044.105.6.3.66.1 | Rowrm200frs02wbCtrllineLoopEntry | not-accessible | current | Row definition for the rm200frs02wbCtrllineLoop table |
| 1.3.6.1.4.1.20044.105.6.3.66.1.1 | Columnrm200frs02wbCtrllineLoopIndex | read-only | current | Index definition for the rm200frs02wbCtrllineLoop table |
| 1.3.6.1.4.1.20044.105.6.3.66.1.2 | Columnrm200frs02wbCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.105.6.3.69 | Tablerm200frs02wbCtrlfecDisableTable | not-accessible | current | List of rm200frs02wbCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.105.6.3.69.1 | Rowrm200frs02wbCtrlfecDisableEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlfecDisable table |
| 1.3.6.1.4.1.20044.105.6.3.69.1.1 | Columnrm200frs02wbCtrlfecDisableIndex | read-only | current | Index definition for the rm200frs02wbCtrlfecDisable table |
| 1.3.6.1.4.1.20044.105.6.3.69.1.2 | Columnrm200frs02wbCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.105.6.3.209 | Tablerm200frs02wbCtrlmsaLineLoopTable | not-accessible | current | List of rm200frs02wbCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.105.6.3.209.1 | Rowrm200frs02wbCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.105.6.3.209.1.1 | Columnrm200frs02wbCtrlmsaLineLoopIndex | read-only | current | Index definition for the rm200frs02wbCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.105.6.3.209.1.2 | Columnrm200frs02wbCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.105.6.3.210 | Tablerm200frs02wbCtrlmsaRestartTable | not-accessible | current | List of rm200frs02wbCtrlmsaRestart Article |
| 1.3.6.1.4.1.20044.105.6.3.210.1 | Rowrm200frs02wbCtrlmsaRestartEntry | not-accessible | current | Row definition for the rm200frs02wbCtrlmsaRestart table |
| 1.3.6.1.4.1.20044.105.6.3.210.1.1 | Columnrm200frs02wbCtrlmsaRestartIndex | read-only | current | Index definition for the rm200frs02wbCtrlmsaRestart table |
| 1.3.6.1.4.1.20044.105.6.3.210.1.2 | Columnrm200frs02wbCtrlmsaRestartPortn | read-write | current | Force Line Restart :This OID forces the restart of the line after a shutdown due to Line high temperature<Help> This parameter forces the restart of the line a… |
| 1.3.6.1.4.1.20044.105.6.3.263 | Tablerm200frs02wbCtrllineResetAllCountTable | not-accessible | current | List of rm200frs02wbCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.105.6.3.263.1 | Rowrm200frs02wbCtrllineResetAllCountEntry | not-accessible | current | Row definition for the rm200frs02wbCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.105.6.3.263.1.1 | Columnrm200frs02wbCtrllineResetAllCountIndex | read-only | current | Index definition for the rm200frs02wbCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.105.6.3.263.1.2 | Columnrm200frs02wbCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.105.7 | Noderm200frs02wbri | |||
| 1.3.6.1.4.1.20044.105.7.1 | Noderm200frs02wbriTable | |||
| 1.3.6.1.4.1.20044.105.7.1.1 | Tablerm200frs02wbRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.105.7.1.1.1 | Rowrm200frs02wbRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.105.7.1.1.1.1 | Columnrm200frs02wbRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.105.7.1.1.1.2 | Columnrm200frs02wbRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.105.7.1.2 | Tablerm200frs02wbRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.105.7.1.2.1 | Rowrm200frs02wbRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.105.7.1.2.1.1 | Columnrm200frs02wbRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.105.7.1.2.1.2 | Columnrm200frs02wbRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.105.7.2 | Scalarrm200frs02wbRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.105.7.3 | Scalarrm200frs02wbRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.105.7.4 | Scalarrm200frs02wbRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.105.7.5 | Scalarrm200frs02wbRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.105.7.6 | Scalarrm200frs02wbRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.105.8 | Noderm200frs02wbdownload | |||
| 1.3.6.1.4.1.20044.105.8.1 | Noderm200frs02wbDwlOther | |||
| 1.3.6.1.4.1.20044.105.8.1.0 | Noderm200frs02wbDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.105.8.1.0.1 | Scalarrm200frs02wbDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.105.8.1.0.2 | Scalarrm200frs02wbDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.105.8.1.1 | Noderm200frs02wbDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.105.8.1.1.1 | Scalarrm200frs02wbDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.105.8.1.1.2 | Scalarrm200frs02wbDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.105.8.1.1.5 | Scalarrm200frs02wbDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.105.8.1.1.6 | Scalarrm200frs02wbDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.105.8.1.2 | Noderm200frs02wbDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.105.8.1.2.1 | Scalarrm200frs02wbDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.105.8.1.2.2 | Scalarrm200frs02wbDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.105.8.1.2.3 | Scalarrm200frs02wbDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.105.8.1.2.4 | Scalarrm200frs02wbDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.105.8.1.2.5 | Scalarrm200frs02wbDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.105.8.1.2.6 | Scalarrm200frs02wbDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.105.8.1.2.7 | Scalarrm200frs02wbDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.105.8.1.2.8 | Scalarrm200frs02wbDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.105.8.2 | Noderm200frs02wbDwlClient | |||
| 1.3.6.1.4.1.20044.105.8.3 | Noderm200frs02wbDwlLine | |||
| 1.3.6.1.4.1.20044.105.9 | Noderm200frs02wbConfig | |||
| 1.3.6.1.4.1.20044.105.9.1 | Noderm200frs02wbCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.105.9.1.1 | Tablerm200frs02wbCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.1.1.1 | Rowrm200frs02wbCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.105.9.1.1.1.1 | Columnrm200frs02wbCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.105.9.1.1.1.3 | Columnrm200frs02wbCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.105.9.2 | Noderm200frs02wbCfgStartup | |||
| 1.3.6.1.4.1.20044.105.9.2.1 | Tablerm200frs02wbCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.2.1.1 | Rowrm200frs02wbCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.105.9.2.1.1.1 | Columnrm200frs02wbCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.105.9.2.1.1.3 | Columnrm200frs02wbCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.105.9.2.1.1.4 | Columnrm200frs02wbCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.105.9.2.1.1.14 | Columnrm200frs02wbCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.105.9.2.2 | Tablerm200frs02wbCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.2.2.1 | Rowrm200frs02wbCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.105.9.2.2.1.1 | Columnrm200frs02wbCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.105.9.2.2.1.3 | Columnrm200frs02wbCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.105.9.2.2.1.14 | Columnrm200frs02wbCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.105.9.2.3 | Tablerm200frs02wbCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.2.3.1 | Rowrm200frs02wbCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.105.9.2.3.1.1 | Columnrm200frs02wbCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.105.9.2.3.1.3 | Columnrm200frs02wbCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.105.9.2.3.1.6 | Columnrm200frs02wbCfgLineInputPowerHighAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.7 | Columnrm200frs02wbCfgLineInputPowerHighWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.8 | Columnrm200frs02wbCfgLineInputPowerLowWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.9 | Columnrm200frs02wbCfgLineInputPowerLowAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.10 | Columnrm200frs02wbCfgLineOutputPowerHighAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.11 | Columnrm200frs02wbCfgLineOutputPowerHighWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.12 | Columnrm200frs02wbCfgLineOutputPowerLowWarningPortn | read-write | current | Default settings on warning threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.13 | Columnrm200frs02wbCfgLineOutputPowerLowAlarmPortn | read-write | current | Default settings on alarm threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.2.3.1.14 | Columnrm200frs02wbCfgLineLossOfSignalPortn | read-write | current | Default settings on Los threshold :This register configures the default initialisation settings on a threshold |
| 1.3.6.1.4.1.20044.105.9.3 | Noderm200frs02wbCfgLabels | |||
| 1.3.6.1.4.1.20044.105.9.3.1 | Tablerm200frs02wbCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.3.1.1 | Rowrm200frs02wbCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.105.9.3.1.1.1 | Columnrm200frs02wbCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.105.9.3.1.1.3 | Columnrm200frs02wbCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.105.9.3.2 | Tablerm200frs02wbCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.3.2.1 | Rowrm200frs02wbCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.105.9.3.2.1.1 | Columnrm200frs02wbCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.105.9.3.2.1.3 | Columnrm200frs02wbCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.105.9.4 | Noderm200frs02wbCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.105.9.4.1 | Tablerm200frs02wbCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.4.1.1 | Rowrm200frs02wbCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.105.9.4.1.1.1 | Columnrm200frs02wbCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.105.9.4.1.1.6 | Columnrm200frs02wbCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.105.9.4.1.1.7 | Columnrm200frs02wbCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.105.9.4.1.1.8 | Columnrm200frs02wbCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.105.9.4.1.1.9 | Columnrm200frs02wbCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.105.9.4.1.1.10 | Columnrm200frs02wbCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.105.9.5 | Noderm200frs02wbCfgOther | |||
| 1.3.6.1.4.1.20044.105.9.5.1 | Noderm200frs02wbtablemoduleOther | |||
| 1.3.6.1.4.1.20044.105.9.5.1.2 | Scalarrm200frs02wbCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.105.9.5.1.3 | Scalarrm200frs02wbCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.105.9.5.1.4 | Scalarrm200frs02wbCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.105.9.5.1.5 | Scalarrm200frs02wbCfgmoduleMode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.105.9.6 | Noderm200frs02wbCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.105.9.6.1 | Tablerm200frs02wbCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.105.9.6.1.1 | Rowrm200frs02wbCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.105.9.6.1.1.1 | Columnrm200frs02wbCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.105.9.6.1.1.3 | Columnrm200frs02wbCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.105.9.6.1.1.4 | Columnrm200frs02wbCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.105.9.6.1.1.5 | Columnrm200frs02wbCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.105.9.6.1.1.6 | Columnrm200frs02wbCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.105.9.6.1.1.7 | Columnrm200frs02wbCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.105.9.257 | Scalarrm200frs02wbCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.105.10 | Noderm200frs02wbtraps | |||
| 1.3.6.1.4.1.20044.105.10.2 | Scalarrm200frs02wbtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.105.10.3 | Scalarrm200frs02wbtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.105.10.4 | Scalarrm200frs02wbtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.105.10.30 | Notificationrm200frs02wbLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.105.10.31 | Notificationrm200frs02wbLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.105.10.32 | Notificationrm200frs02wbLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.105.10.33 | Notificationrm200frs02wbLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.105.10.34 | Notificationrm200frs02wbLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.105.10.35 | Notificationrm200frs02wbLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.105.10.40 | Notificationrm200frs02wbClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.105.10.41 | Notificationrm200frs02wbClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.105.10.42 | Notificationrm200frs02wbClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.105.10.43 | Notificationrm200frs02wbClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.105.10.44 | Notificationrm200frs02wbClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.105.10.45 | Notificationrm200frs02wbClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.105.10.50 | Notificationrm200frs02wbPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.105.10.51 | Notificationrm200frs02wbPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.105.11 | Noderm200frs02wbMonitoring | |||
| 1.3.6.1.4.1.20044.105.11.1 | Noderm200frs02wbMonOther | |||
| 1.3.6.1.4.1.20044.105.11.1.3 | Noderm200frs02wbMonRmon | |||
| 1.3.6.1.4.1.20044.105.11.2 | Noderm200frs02wbMonClient | |||
| 1.3.6.1.4.1.20044.105.11.2.4 | Noderm200frs02wbMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.105.11.2.4.16 | Tablerm200frs02wbMonupRmonBytesCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.16.1 | Rowrm200frs02wbMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.16.1.1 | Columnrm200frs02wbMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.16.1.2 | Columnrm200frs02wbMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.105.11.2.4.16.1.3 | Columnrm200frs02wbMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.16.1.4 | Columnrm200frs02wbMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.48 | Tablerm200frs02wbMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.48.1 | Rowrm200frs02wbMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.48.1.1 | Columnrm200frs02wbMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.48.1.2 | Columnrm200frs02wbMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.105.11.2.4.48.1.3 | Columnrm200frs02wbMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.48.1.4 | Columnrm200frs02wbMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.80 | Tablerm200frs02wbMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.80.1 | Rowrm200frs02wbMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.80.1.1 | Columnrm200frs02wbMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.80.1.2 | Columnrm200frs02wbMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.105.11.2.4.80.1.3 | Columnrm200frs02wbMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.80.1.4 | Columnrm200frs02wbMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.112 | Tablerm200frs02wbMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.112.1 | Rowrm200frs02wbMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.112.1.1 | Columnrm200frs02wbMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.112.1.2 | Columnrm200frs02wbMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.105.11.2.4.112.1.3 | Columnrm200frs02wbMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.112.1.4 | Columnrm200frs02wbMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.144 | Tablerm200frs02wbMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.144.1 | Rowrm200frs02wbMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.144.1.1 | Columnrm200frs02wbMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.144.1.2 | Columnrm200frs02wbMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.105.11.2.4.144.1.3 | Columnrm200frs02wbMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.144.1.4 | Columnrm200frs02wbMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.176 | Tablerm200frs02wbMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.176.1 | Rowrm200frs02wbMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.176.1.1 | Columnrm200frs02wbMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.176.1.2 | Columnrm200frs02wbMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.105.11.2.4.176.1.3 | Columnrm200frs02wbMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.176.1.4 | Columnrm200frs02wbMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.304 | Tablerm200frs02wbMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.304.1 | Rowrm200frs02wbMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.304.1.1 | Columnrm200frs02wbMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.304.1.2 | Columnrm200frs02wbMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.105.11.2.4.304.1.3 | Columnrm200frs02wbMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.304.1.4 | Columnrm200frs02wbMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.336 | Tablerm200frs02wbMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of rm200frs02wbMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.336.1 | Rowrm200frs02wbMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the rm200frs02wbMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.336.1.1 | Columnrm200frs02wbMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the rm200frs02wbMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.105.11.2.4.336.1.2 | Columnrm200frs02wbMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.105.11.2.4.336.1.3 | Columnrm200frs02wbMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.336.1.4 | Columnrm200frs02wbMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.400 | Tablerm200frs02wbMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.400.1 | Rowrm200frs02wbMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.400.1.1 | Columnrm200frs02wbMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.400.1.2 | Columnrm200frs02wbMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.105.11.2.4.400.1.3 | Columnrm200frs02wbMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.400.1.4 | Columnrm200frs02wbMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.432 | Tablerm200frs02wbMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.432.1 | Rowrm200frs02wbMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.432.1.1 | Columnrm200frs02wbMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.432.1.2 | Columnrm200frs02wbMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.105.11.2.4.432.1.3 | Columnrm200frs02wbMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.432.1.4 | Columnrm200frs02wbMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.464 | Tablerm200frs02wbMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.464.1 | Rowrm200frs02wbMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.464.1.1 | Columnrm200frs02wbMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.464.1.2 | Columnrm200frs02wbMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.105.11.2.4.464.1.3 | Columnrm200frs02wbMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.464.1.4 | Columnrm200frs02wbMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.496 | Tablerm200frs02wbMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.496.1 | Rowrm200frs02wbMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.496.1.1 | Columnrm200frs02wbMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.496.1.2 | Columnrm200frs02wbMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.105.11.2.4.496.1.3 | Columnrm200frs02wbMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.496.1.4 | Columnrm200frs02wbMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.528 | Tablerm200frs02wbMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.528.1 | Rowrm200frs02wbMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.528.1.1 | Columnrm200frs02wbMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.528.1.2 | Columnrm200frs02wbMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.105.11.2.4.528.1.3 | Columnrm200frs02wbMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.528.1.4 | Columnrm200frs02wbMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.560 | Tablerm200frs02wbMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.560.1 | Rowrm200frs02wbMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.560.1.1 | Columnrm200frs02wbMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.560.1.2 | Columnrm200frs02wbMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.105.11.2.4.560.1.3 | Columnrm200frs02wbMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.560.1.4 | Columnrm200frs02wbMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.688 | Tablerm200frs02wbMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.688.1 | Rowrm200frs02wbMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.688.1.1 | Columnrm200frs02wbMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.688.1.2 | Columnrm200frs02wbMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.105.11.2.4.688.1.3 | Columnrm200frs02wbMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.688.1.4 | Columnrm200frs02wbMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.720 | Tablerm200frs02wbMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of rm200frs02wbMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.105.11.2.4.720.1 | Rowrm200frs02wbMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the rm200frs02wbMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.720.1.1 | Columnrm200frs02wbMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the rm200frs02wbMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.105.11.2.4.720.1.2 | Columnrm200frs02wbMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.105.11.2.4.720.1.3 | Columnrm200frs02wbMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.105.11.2.4.720.1.4 | Columnrm200frs02wbMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.105.11.5 | Noderm200frs02wbMonPerfOther | |||
| 1.3.6.1.4.1.20044.105.11.5.1 | Noderm200frs02wbMonPerfSync | |||
| 1.3.6.1.4.1.20044.105.11.5.1.257 | Scalarrm200frs02wbPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.105.11.5.1.259 | Scalarrm200frs02wbPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.105.11.5.1.260 | Scalarrm200frs02wbPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.105.11.5.2 | Noderm200frs02wbMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.105.11.5.2.1 | Scalarrm200frs02wbPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.105.11.5.2.2 | Scalarrm200frs02wbPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.105.11.5.2.5 | Scalarrm200frs02wbPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.105.11.5.2.6 | Scalarrm200frs02wbPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.105.11.5.2.7 | Scalarrm200frs02wbPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.105.11.5.2.8 | Scalarrm200frs02wbPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.105.11.6 | Noderm200frs02wbMonPerfClient | |||
| 1.3.6.1.4.1.20044.105.11.6.16 | Tablerm200frs02wbPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.105.11.6.16.1 | Rowrm200frs02wbPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.6.16.1.1 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.6.16.1.2 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.16.1.3 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.16.1.4 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.16.1.5 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.16.1.6 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.16.1.7 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.16.1.8 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.16.1.9 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.16.1.10 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.16.1.11 | Columnrm200frs02wbPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.48 | Tablerm200frs02wbPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.6.48.1 | Rowrm200frs02wbPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.48.1.1 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.48.1.2 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.48.1.3 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.48.1.4 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.48.1.5 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.48.1.6 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.48.1.7 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.48.1.8 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.48.1.9 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.48.1.10 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.48.1.11 | Columnrm200frs02wbPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.80 | Tablerm200frs02wbPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.105.11.6.80.1 | Rowrm200frs02wbPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.6.80.1.1 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.6.80.1.2 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.80.1.3 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.80.1.4 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.80.1.5 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.80.1.6 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.80.1.7 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.80.1.8 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.80.1.9 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.80.1.10 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.80.1.11 | Columnrm200frs02wbPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.112 | Tablerm200frs02wbPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.6.112.1 | Rowrm200frs02wbPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.112.1.1 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.112.1.2 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.112.1.3 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.112.1.4 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.112.1.5 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.112.1.6 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.112.1.7 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.112.1.8 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.112.1.9 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.112.1.10 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.112.1.11 | Columnrm200frs02wbPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.144 | Tablerm200frs02wbPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.105.11.6.144.1 | Rowrm200frs02wbPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.6.144.1.1 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.6.144.1.2 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.144.1.3 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.144.1.4 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.144.1.5 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.144.1.6 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.144.1.7 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.144.1.8 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.144.1.9 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.144.1.10 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.144.1.11 | Columnrm200frs02wbPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.176 | Tablerm200frs02wbPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.6.176.1 | Rowrm200frs02wbPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.176.1.1 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.176.1.2 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.176.1.3 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.176.1.4 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.176.1.5 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.176.1.6 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.176.1.7 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.176.1.8 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.176.1.9 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.176.1.10 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.176.1.11 | Columnrm200frs02wbPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.208 | Tablerm200frs02wbPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.105.11.6.208.1 | Rowrm200frs02wbPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.6.208.1.1 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.6.208.1.2 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.208.1.3 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.208.1.4 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.208.1.5 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.208.1.6 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.208.1.7 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.208.1.8 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.208.1.9 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.208.1.10 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.208.1.11 | Columnrm200frs02wbPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.240 | Tablerm200frs02wbPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.6.240.1 | Rowrm200frs02wbPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.240.1.1 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.240.1.2 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.240.1.3 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.6.240.1.4 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.240.1.5 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.240.1.6 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.240.1.7 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.240.1.8 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.240.1.9 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.240.1.10 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.240.1.11 | Columnrm200frs02wbPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.6.848 | Tablerm200frs02wbPerfDatacomClientCurrent15StatTable | not-accessible | current | List of rm200frs02wbPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.105.11.6.848.1 | Rowrm200frs02wbPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.6.848.1.1 | Columnrm200frs02wbPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the rm200frs02wbPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.6.848.1.4 | Columnrm200frs02wbperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.848.1.5 | Columnrm200frs02wbperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.848.1.6 | Columnrm200frs02wbperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.848.1.7 | Columnrm200frs02wbperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.105.11.6.848.1.28 | Columnrm200frs02wbperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.848.1.29 | Columnrm200frs02wbperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.848.1.30 | Columnrm200frs02wbperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.848.1.31 | Columnrm200frs02wbperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.105.11.6.880 | Tablerm200frs02wbPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.6.880.1 | Rowrm200frs02wbPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.880.1.1 | Columnrm200frs02wbPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.880.1.4 | Columnrm200frs02wbperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.880.1.5 | Columnrm200frs02wbperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.880.1.6 | Columnrm200frs02wbperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.880.1.7 | Columnrm200frs02wbperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.105.11.6.880.1.28 | Columnrm200frs02wbperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.880.1.29 | Columnrm200frs02wbperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.880.1.30 | Columnrm200frs02wbperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.880.1.31 | Columnrm200frs02wbperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.105.11.6.912 | Tablerm200frs02wbPerfDatacomClientCurrent24StatTable | not-accessible | current | List of rm200frs02wbPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.105.11.6.912.1 | Rowrm200frs02wbPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.6.912.1.1 | Columnrm200frs02wbPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the rm200frs02wbPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.6.912.1.4 | Columnrm200frs02wbperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.912.1.5 | Columnrm200frs02wbperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.912.1.6 | Columnrm200frs02wbperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.912.1.7 | Columnrm200frs02wbperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.105.11.6.912.1.28 | Columnrm200frs02wbperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.912.1.29 | Columnrm200frs02wbperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.912.1.30 | Columnrm200frs02wbperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.912.1.31 | Columnrm200frs02wbperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.105.11.6.944 | Tablerm200frs02wbPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.6.944.1 | Rowrm200frs02wbPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.944.1.1 | Columnrm200frs02wbPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.6.944.1.4 | Columnrm200frs02wbperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.944.1.5 | Columnrm200frs02wbperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.944.1.6 | Columnrm200frs02wbperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.944.1.7 | Columnrm200frs02wbperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.105.11.6.944.1.28 | Columnrm200frs02wbperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.944.1.29 | Columnrm200frs02wbperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.105.11.6.944.1.30 | Columnrm200frs02wbperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.105.11.6.944.1.31 | Columnrm200frs02wbperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.105.11.7 | Noderm200frs02wbMonPerfLine | |||
| 1.3.6.1.4.1.20044.105.11.7.336 | Tablerm200frs02wbPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.105.11.7.336.1 | Rowrm200frs02wbPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.7.336.1.1 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.7.336.1.2 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.336.1.3 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.336.1.4 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.336.1.5 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.336.1.6 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.336.1.7 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.336.1.8 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.336.1.9 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.336.1.10 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.336.1.11 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.337 | Tablerm200frs02wbPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.7.337.1 | Rowrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.337.1.1 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.337.1.2 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.337.1.3 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.337.1.4 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.337.1.5 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.337.1.6 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.337.1.7 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.337.1.8 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.337.1.9 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.337.1.10 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.337.1.11 | Columnrm200frs02wbPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.338 | Tablerm200frs02wbPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.105.11.7.338.1 | Rowrm200frs02wbPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.7.338.1.1 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.7.338.1.2 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.338.1.3 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.338.1.4 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.338.1.5 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.338.1.6 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.338.1.7 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.338.1.8 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.338.1.9 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.338.1.10 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.338.1.11 | Columnrm200frs02wbPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.339 | Tablerm200frs02wbPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.7.339.1 | Rowrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.339.1.1 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.339.1.2 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.339.1.3 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.339.1.4 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.339.1.5 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.339.1.6 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.339.1.7 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.339.1.8 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.339.1.9 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.339.1.10 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.339.1.11 | Columnrm200frs02wbPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.352 | Tablerm200frs02wbPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.105.11.7.352.1 | Rowrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.7.352.1.1 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.105.11.7.352.1.2 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.352.1.3 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.352.1.4 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.352.1.5 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.352.1.6 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.352.1.7 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.353 | Tablerm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.7.353.1 | Rowrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.353.1.1 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.353.1.2 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.353.1.3 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.353.1.4 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.353.1.5 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.353.1.6 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.353.1.7 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.354 | Tablerm200frs02wbPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of rm200frs02wbPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.105.11.7.354.1 | Rowrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.7.354.1.1 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the rm200frs02wbPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.105.11.7.354.1.2 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.354.1.3 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.354.1.4 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.354.1.5 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.354.1.6 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.354.1.7 | Columnrm200frs02wbPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.355 | Tablerm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of rm200frs02wbPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.105.11.7.355.1 | Rowrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the rm200frs02wbPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.355.1.1 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the rm200frs02wbPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.105.11.7.355.1.2 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.355.1.3 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.105.11.7.355.1.4 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.355.1.5 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.105.11.7.355.1.6 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.105.11.7.355.1.7 | Columnrm200frs02wbPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Rm200frs02wbAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Rm200frs02wbClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Rm200frs02wbDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Rm200frs02wbModuleMode | INTEGER { modulemodevalue0(0), modulemodevalue1(1), modulemodevalue2(2), modulemodevalue3(3), modulemodevalue4(4), modulemodevalue5(5) } | current | Different values on the module mode |
| Rm200frs02wbMultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Rm200frs02wbOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Rm200frs02wbOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Rm200frs02wbOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Rm200frs02wbOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |