EKINOPS-Trfan-MIB
84 objects
MIB for the Ekinops Trfan hardware.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.45 | Identitymoduletrfan | MIB for the Ekinops Trfan hardware. | ||
| 1.3.6.1.4.1.20044.45.2 | Nodetrfanalarms | |||
| 1.3.6.1.4.1.20044.45.2.1 | NodetrfanAlmOther | |||
| 1.3.6.1.4.1.20044.45.2.1.1 | NodetrfanAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.45.2.1.1.2 | NodetrfanAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.45.2.1.1.2.1 | ScalartrfanAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.45.2.1.1.2.2 | ScalartrfanAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.45.2.1.1.2.3 | ScalartrfanAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.45.2.1.1.2.4 | ScalartrfanAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.45.2.1.2 | NodetrfanAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.45.2.1.2.16 | NodetrfanAlmfilterAlm | |||
| 1.3.6.1.4.1.20044.45.2.1.2.16.15 | ScalartrfanAlmFilterNotPresent | read-only | current | Dust Filter Presence :This OID indicates that the dust filter is not present <Help> This alarm indicates that the dust filter is not present <Condtype> FILTER_… |
| 1.3.6.1.4.1.20044.45.2.1.2.20 | NodetrfanAlmfansMgnt | |||
| 1.3.6.1.4.1.20044.45.2.1.2.20.2 | ScalartrfanAlmFan1Fail | read-only | current | Fan Unit #1 Failed On Fan Module :This OID indicates a failure on fan #1. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.3 | ScalartrfanAlmFan2Fail | read-only | current | Fan Unit #2 Failed On Fan Module :This OID indicates a failure on fan #2. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.4 | ScalartrfanAlmFan3Fail | read-only | current | Fan Unit #3 Failed On Fan Module :This OID indicates a failure on fan #3. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.5 | ScalartrfanAlmFan4Fail | read-only | current | Fan Unit #4 Failed On Fan Module :This OID indicates a failure on fan #4. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.6 | ScalartrfanAlmFan5Fail | read-only | current | Fan Unit #5 Failed On Fan Module :This OID indicates a failure on fan #5. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.7 | ScalartrfanAlmFan6Fail | read-only | current | Fan Unit #6 Failed On Fan Module :This OID indicates a failure on fan #6. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if t… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.13 | ScalartrfanAlmFansOff | read-only | current | Fans Fail :This OID indicates the 6 fans of the TR-FAN are OFF <Help> This alarm indicates the 6 fans of the TR-FAN are OFF <Condtype> FANS_OFF <Probcause> hea… |
| 1.3.6.1.4.1.20044.45.2.1.2.20.14 | ScalartrfanAlmFanLowSpeed | read-only | current | Fan High Speed :This OID indicates the 6 fans of the TR-FAN are blowing at high speed <Help> This status indicates the 6 fans of the TR-FAN are blowing at high… |
| 1.3.6.1.4.1.20044.45.2.1.2.24 | NodetrfanAlmpwrMgnt | |||
| 1.3.6.1.4.1.20044.45.2.1.2.24.13 | ScalartrfanAlmPwr12v1Fail | read-only | current | Fan Power 1 Fail :This OID indicates a failure on the power 1 of the FAN module. <Help> This alarm indicates if one of the two powers converters of the FAN mod… |
| 1.3.6.1.4.1.20044.45.2.1.2.24.14 | ScalartrfanAlmPwr12v2Fail | read-only | current | Fan Power 2 Fail :This OID indicates a failure on the power 2 of the FAN module. <Help> This alarm indicates if one of the two powers converters of the FAN mod… |
| 1.3.6.1.4.1.20044.45.2.1.2.70 | NodetrfanAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.45.2.1.2.70.1 | ScalartrfanAlmRegReadFail | read-only | current | Reg_Read_Fail : <Condtype> REG_READ_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.45.2.1.2.70.2 | ScalartrfanAlmResetHwInitFail | read-only | current | Reset_HW_Init_Fail : <Condtype> RESET_HW_INIT_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.45.2.1.2.70.3 | ScalartrfanAlmConfReadFail | read-only | current | Conf_Read_Fail : <Condtype> CONF_READ_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.45.2.1.2.70.4 | ScalartrfanAlmInvReadFail | read-only | current | : <Condtype> INV_READ_FAIL <Probcause> other (1) <Alarmtype> other (1) <Polarity> (2) |
| 1.3.6.1.4.1.20044.45.2.1.3 | NodetrfanAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.45.2.1.3.0 | NodetrfanAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.45.2.1.3.0.9 | ScalartrfanAlmModuleGlobFailure | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MODULE_GLOB_FAILURE <Probcause> equipmentMalfunction (16) <Alarmty… |
| 1.3.6.1.4.1.20044.45.2.1.3.0.11 | ScalartrfanAlmDefPowerA | read-only | current | Power Input A Present :This OID indicates that there is not input power on the right power connector (A). <Help> This alarm indicates if the power input B is p… |
| 1.3.6.1.4.1.20044.45.2.1.3.0.12 | ScalartrfanAlmDefPowerB | read-only | current | Power Input B Present :This OID indicates that there is not input power on the right power connector (B). <Help> This alarm indicates if the power input B is p… |
| 1.3.6.1.4.1.20044.45.2.1.3.0.13 | ScalartrfanAlmAcknowledge | read-only | current | Alarm Ack. :This OID indicates the alarms have been acknowledged by the user (locally or remotely) <Help> This status indicates the alarms have been acknowledg… |
| 1.3.6.1.4.1.20044.45.2.1.3.0.15 | ScalartrfanAlmDefFuse | read-only | current | Fuse Fail :This OID indicates that the fuse of the power input is in fail condition. <Help> Status of the Fuse <Condtype> DEF_FUSE <Probcause> powerProblem (36… |
| 1.3.6.1.4.1.20044.45.2.1.3.1 | NodetrfanAlmsynthAlm1 | |||
| 1.3.6.1.4.1.20044.45.2.1.3.1.10 | ScalartrfanAlmFansFailure | read-only | current | Chassis Fan Module Failure :This OID indicates that at least one of the six FAN unit of the FAN module is in fail condition <Help> This alarm indicates that on… |
| 1.3.6.1.4.1.20044.45.3 | Nodetrfanmeasures | |||
| 1.3.6.1.4.1.20044.45.3.1 | NodetrfanMesrOther | |||
| 1.3.6.1.4.1.20044.45.3.1.16 | ScalartrfanMesrvoltMeas12v1 | read-only | current | Internal 12V_1 :This OID gives the internal voltage value of the TRFAN (Voltage = AV/500) (Unit = V) <Help> This measure gives the internal voltage value of th… |
| 1.3.6.1.4.1.20044.45.3.1.17 | ScalartrfanMesrvoltMeas12v2 | read-only | current | Internal 12V_2 :This OID gives the internal voltage value of the TRFAN (Voltage = AV/500) (Unit = V) <Help> This measure gives the internal voltage value of th… |
| 1.3.6.1.4.1.20044.45.3.1.64 | ScalartrfanMesrtempChassis | read-only | current | Chassis Temperature :This OID gives the temperature value of the Chassis (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature value of t… |
| 1.3.6.1.4.1.20044.45.6 | NodetrfancontrolsWrite | |||
| 1.3.6.1.4.1.20044.45.6.1 | NodetrfanCtrlOther | |||
| 1.3.6.1.4.1.20044.45.6.1.0 | NodetrfanCtrlsynth0 | |||
| 1.3.6.1.4.1.20044.45.6.1.0.1 | ScalartrfanCtrlConfLoad | read-write | current | Load Configuration Tables :When set this enables loading from flash configuration1 into the module. |
| 1.3.6.1.4.1.20044.45.6.1.0.9 | ScalartrfanCtrlConfFlash | read-write | current | Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. <Help> This control saves the customer config… |
| 1.3.6.1.4.1.20044.45.6.1.0.13 | ScalartrfanCtrlConfClear | read-write | current | Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. <Help> This control restores the default configuration of… |
| 1.3.6.1.4.1.20044.45.6.1.4 | NodetrfanCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.45.6.1.4.1 | ScalartrfanCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.45.6.1.4.2 | ScalartrfanCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.45.6.1.5 | NodetrfanCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.45.6.1.5.2 | ScalartrfanCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start… |
| 1.3.6.1.4.1.20044.45.6.1.5.3 | ScalartrfanCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unch… |
| 1.3.6.1.4.1.20044.45.6.1.64 | NodetrfanCtrlledTest | |||
| 1.3.6.1.4.1.20044.45.6.1.64.1 | ScalartrfanCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.45.6.1.64.2 | ScalartrfanCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.45.6.1.64.3 | ScalartrfanCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.45.6.1.65 | NodetrfanCtrlacknowledgeActiv | |||
| 1.3.6.1.4.1.20044.45.6.1.65.1 | ScalartrfanCtrlAckActiv | read-write | current | Alarm Ack. :This OID is used to acknowledge the current active alarms of the chassis <Help> This control is used to acknowledge the current active alarms of th… |
| 1.3.6.1.4.1.20044.45.7 | Nodetrfanri | |||
| 1.3.6.1.4.1.20044.45.7.1 | NodetrfanriTable | |||
| 1.3.6.1.4.1.20044.45.7.2 | ScalartrfanRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.45.7.3 | ScalartrfanRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.45.7.4 | ScalartrfanRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.45.7.5 | ScalartrfanRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.45.9 | NodetrfanConfig | |||
| 1.3.6.1.4.1.20044.45.9.1 | NodetrfanCfgLsd | |||
| 1.3.6.1.4.1.20044.45.9.2 | NodetrfanCfgStartUp | |||
| 1.3.6.1.4.1.20044.45.9.2.1 | Nodetrfantableother | |||
| 1.3.6.1.4.1.20044.45.9.2.1.2 | ScalartrfanCfglowspeedThresh | read-write | current | Fans Low Speed Threshold Temp :This register selects the temperature threshold to trigger the fans to a low speed when the temperature is reaching that thresho… |
| 1.3.6.1.4.1.20044.45.9.2.1.3 | ScalartrfanCfghighspeedThresh | read-write | current | Fans High Speed Threshold Temp :This register selects the temperature threshold to trigger the fans to a high speed when the temperature is reaching that thres… |
| 1.3.6.1.4.1.20044.45.9.2.1.10 | ScalartrfanCfgtrfanMgnt | read-write | current | Trfan Management :This register selects the features to manage the Trfan |
| 1.3.6.1.4.1.20044.45.9.3 | NodetrfanCfgLabels | |||
| 1.3.6.1.4.1.20044.45.9.257 | ScalartrfanCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.45.10 | Nodetrfantraps | |||
| 1.3.6.1.4.1.20044.45.10.2 | ScalartrfantrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.45.10.32 | NotificationtrfanPowerTrapUrgentGoesOn | current | Urgent power default is activated | |
| 1.3.6.1.4.1.20044.45.10.33 | NotificationtrfanPowerTrapUrgentGoesOff | current | Urgent power default disappeared | |
| 1.3.6.1.4.1.20044.45.10.34 | NotificationtrfanPowerTrapCritGoesOn | current | Critical power default is activated | |
| 1.3.6.1.4.1.20044.45.10.35 | NotificationtrfanPowerTrapCritGoesOff | current | Critical power default disappeared | |
| 1.3.6.1.4.1.20044.45.10.44 | NotificationtrfanFanTrapCritGoesOn | current | Critical fan default is activated | |
| 1.3.6.1.4.1.20044.45.10.45 | NotificationtrfanFanTrapCritGoesOff | current | Critical fan default disappeared |