ELECTROLINE-COMMON-CONFIG-MIB
18 objects
No module-level DESCRIPTION found.
Imported Objects
| ELECTROLINE-COMMON-ROOT-MIB | commonConfiguration |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RFC1155-SMI | NetworkAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5802.1.3.1.4.2.1 | IdentitycfgTimers | current | Group of configuration objects related to DHT timing | |
| 1.3.6.1.4.1.5802.1.3.1.4.2.1.1 | ScalarcfgCommonSnmpTimeout | read-write | current | This MIB controls the SNMP activity watchdog period. The value is in minutes. A value of zero deactivates the feature. When the feature is active, if the DHT d… |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2 | IdentitycfgIpInterfaces | current | This sections specifies IP behavior for the DHT monitoring interface. | |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.1 | ScalarcfgIpMode | read-write | current | This object controls the IP interface behavior of the DHT Set it to singleIp(1) to access HMS MIB objects through the DOCSIS management interface. Set it to du… |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50 | IdentitycfgCommonHmsSnmpAgent | current | This sections specifies controls for the agents. | |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.1 | ScalarcfgCommonHmsSnmpManagerCommunity | read-write | current | This MIB is used to specify the SNMP community string used for write access to the SNMP agent in Dual IP mode. The default value for this MIB is DhtHmsWriteSec… |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.2 | ScalarcfgCommonHmsSnmpMonitorCommunity | read-write | current | This MIB is used to specify the SNMP Read-only community string used to access the SNMP agent in Dual IP mode. The default value for this MIB is DhtHmsReadSecr… |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.3 | IdentitycfgCommonHmsSnmpAccess | current | This sub-tree contains configuration information for HMS SNMP access management. | |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.3.1 | TablecfgCommonHmsSnmpAccessTable | read-write | current | This table allow access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.3.1.1 | RowcfgCommonHmsSnmpAccessEntry | not-accessible | current | HMS SNMP Access entry definition |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.3.1.1.1 | ColumncfgCommonHmsSnmpAccessIndex | read-only | current | Index into the HMS SNMP access table |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.3.1.1.2 | ColumncfgCommonHmsSnmpAccessIP | read-write | current | IPv4 address of the network management station |
| 1.3.6.1.4.1.5802.1.3.1.4.2.2.50.3.1.1.3 | ColumncfgCommonHmsSnmpAccessIPMask | read-write | current | IPv4 subnet mask of the network management station |
| 1.3.6.1.4.1.5802.1.3.1.4.2.3 | ScalarcfgVendorInfo | read-write | current | Vendor-specific information in human-readable format. When set, it mirrors and overrides the mib commonVendorInfo from the SCTE tree. |
| 1.3.6.1.4.1.5802.1.3.1.4.2.4 | ScalarcfgHmsTimeReference | read-write | current | This MIB controls the time reference that is applied in the SCTE HMS tree. It affects how commonTime and alarmLogInformation time reference are represented. Se… |
| 1.3.6.1.4.1.5802.1.3.1.4.2.5 | ScalarcfgResetToFactory | read-write | current | This MIB can be used to remotely restore the factory default values, thus overwriting any other setup values (HMS and internal transponder settings) that were … |
| 1.3.6.1.4.1.5802.1.3.1.4.2.6 | ScalarcfgLocalInterfaceMode | read-write | current | This MIB controls the behavior of the local interface port. In craft mode, the USB port (if available on the unit) has a default MAC address which enables a PC… |
| 1.3.6.1.4.1.5802.1.3.1.4.2.7 | ScalarcfgChannelBondingEnable | read-write | current | Enables or disables the support of channel bonding. The value of this MIB is stored in non-volatile memory. |