ELECTROLINE-DHT-CONFIG-MIB
57 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5802.1.3.1.2.2.1 | IdentitydhtCfgGlobal | current | Group of configuration objects related to all DHT models | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1 | IdentitydhtCfgHmsEms | current | This sub-tree contains configuration information for trap management. | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1 | TablecfgHmsEmsAddressTable | read-write | current | This is the list of network addresses of the Element Management System(s) to which the DHT will send its HmsColdStart, HmsWarmStart and HmsAlarmEvent traps. Th… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1 | RowcfgHmsEmsAddressEntry | not-accessible | current | HMS EMS entry definition |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.1 | ColumncfgHmsEmsAddressIndex | read-only | current | Index into the EMS address table |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.2 | ColumncfgHmsEmsAddressIP | read-write | deprecated | IPv4 address of the destination EMS that will receive HMS traps. If the EMS server address is unknown or is not an IPv4 address, return 0.0.0.0.. Valide IPv4 a… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.3 | ColumncfgHmsEmsAddressStartTrapAssurance | read-write | current | When this MIB is set to one, additional binding is appended to the cold or warm start Trap (HMS). The EMS must set the bound OID to 1 to acknowledge receipt of… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.4 | ColumncfgHmsEmsAddressAlarmTrapAssurance | read-write | current | When this MIB is set to true, additional binding is appended to all the Alarm Traps (HMS). The EMS must set the bound OID to x to acknowledge receipt of the tr… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.5 | ColumncfgHmsEmsAddressTrapPortNumber | read-write | current | This represents the Ems's port number to which the trap will be sent to. The default value is the common SNMP trap port (162). |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.6 | ColumncfgHmsEmsAddressTypeInet | read-write | current | The address type of the EMS server. Values: unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) The update of this object is coherent to cfgHmsEmsAddress… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.1.1.7 | ColumncfgHmsEmsAddressInet | read-write | current | IPv4 or IPv6 address of the destination EMS that will receive traps. If the message server is unknown, return the zero-length address string. The update of thi… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.2 | ScalarcfgEmsTimeout | read-write | current | This is the period of time (in seconds) during which the DHT expects to receive an acknowlege trap from an EMS that has enabled trap assurance. If no acknowled… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.3 | ScalarcfgEmsRetry | read-write | current | This is the number of times that the DHT resends a trap to an EMS that has enabled the trap assurance, if no acknowledge message is received. The default value… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.4 | ScalarcfgEmsDefaultHmsProperties | read-write | current | This MIB can be used to reset all HMS properties (both analog and discrete table entries) to their factory default values. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.5 | ScalarcfgEmsCompatibilityMode | read-write | obsolete | This MIB is not currently supported by the DHT |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.6 | ScalarcfgEmsXpdrName | read-write | current | This MIB is used by the EEMS software. Its value has no impact on the DHT's operation, but is stored in its non-volatile memory |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.7 | ScalarcfgEmsXpdrLocation | read-write | current | This MIB is used by the EEMS software. Its value has no impact on the DHT's operation, but is stored in its non-volatile memory |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.8 | ScalarcfgEmsXpdrDescription | read-write | current | This MIB is used by the EEMS software. Its value has no impact on the DHT's operation, but is stored in its non-volatile memory |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.9 | ScalarcfgEmsXpdrGroupPath | read-write | current | This MIB is used by the EEMS software to indicate the logical group to which this DHT belongs. This value has no impact on the DHT's operation, but is stored i… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.10 | ScalarcfgEmsXpdrCustomField1 | read-write | current | This MIB is used by the EEMS software to store user-defined data on this DHT. This value has no impact on the DHT's operation, but is stored in its non-volatil… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.11 | ScalarcfgEmsXpdrCustomField2 | read-write | current | This MIB is used by the EEMS software to store user-defined data on this DHT. This value has no impact on the DHT's operation, but is stored in its non-volatil… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.1.12 | ScalarcfgEmsXpdrCustomField3 | read-write | current | This MIB is used by the EEMS software to store user-defined data on this DHT. This value has no impact on the DHT's operation, but is stored in its non-volatil… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.2 | ScalardhtCfgResetToFactory | read-write | deprecated | This MIB can be used to remotely restore the factory default values, thus overwriting any other setup values (HMS and internal transponder settings) that were … |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.3 | ScalardhtCfgUsbMode | read-write | deprecated | This MIB controls the behavior of the USB port. In craft mode, the USB port has a default MAC address which enables a PC to be connected locally to any DHT wit… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.4 | IdentitydhtCfgTimers | deprecated | Group of configuration objects related to DHT timing. Deprecated. Has been move into electrolineCommon branch | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.4.1 | ScalarcfgSnmpTimeout | read-write | deprecated | This MIB controls the SNMP activity watchdog period. The value is in minutes. A value of zero deactivates the feature. When the feature is active, if the DHT d… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5 | IdentitydhtCfgIpInterfaces | deprecated | This sections specifies IP behavior for the DHT monitoring interface. This section has been move to the electroline Common branch | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.1 | ScalarcfgDhtIpMode | read-write | deprecated | This object controls the IP interface behavior of the DHT Set it to singleIp(1) to access HMS MIB objects through the DOCSIS management interface. Set it to du… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50 | IdentitycfgHmsSnmpAgent | deprecated | This sections specifies controls for the agents. This section has been move to electrolineCommon branch | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.1 | ScalarhmsSnmpManagerCommunity | read-write | deprecated | This MIB is used to specify the SNMP community string used for write access to the SNMP agent in Dual IP mode. The default value for this MIB is DhtHmsWriteSec… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.2 | ScalarhmsSnmpMonitorCommunity | read-write | deprecated | This MIB is used to specify the SNMP Read-only community string used to access the SNMP agent in Dual IP mode. The default value for this MIB is DhtHmsReadSecr… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.3 | IdentitycfgHmsSnmpAccess | deprecated | This sub-tree contains configuration information for HMS SNMP access management. Deprecated. Has been move into electrolineCommon branch. | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.3.1 | TablecfgHmsSnmpAccessTable | read-write | deprecated | This table allow access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted. Deprecated. Has been mov… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.3.1.1 | RowcfgHmsSnmpAccessEntry | not-accessible | deprecated | HMS SNMP Access entry definition Deprecated. Has been move into electrolineCommon branch. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.3.1.1.1 | ColumncfgHmsSnmpAccessIndex | read-only | deprecated | Index into the HMS SNMP access table. Deprecated. Has been move into electrolineCommon branch. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.3.1.1.2 | ColumncfgHmsSnmpAccessIP | read-write | deprecated | IPv4 address of the network management station. Deprecated. Has been move into electrolineCommon branch. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.5.50.3.1.1.3 | ColumncfgHmsSnmpAccessIPMask | read-write | deprecated | IPv4 subnet mask of the network management station |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.6 | ScalardhtCfgVendorInfo | read-write | deprecated | Vendor-specific information in human-readable format. When set, it mirrors and overrides the mib commonVendorInfo from the SCTE tree. Deprecated. Has been move… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.1.7 | ScalardhtCfgHmsTimeReference | read-write | deprecated | This MIB controls the time reference that is applied in the SCTE HMS tree. It affects how commonTime and alarmLogInformation time reference are represented. Se… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2 | IdentitydhtCfgPowerSupply | current | Group of configuration objects related to the DHT-PS-NA-01 model only | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.1 | IdentitydhtCfgBatterySave | current | This Sub-tree contains the configuration parameters for the DHT's battery saving mode. This feature allows the DHT to enter sleep mode when any of the batterie… | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.1.1 | ScalarcfgSleepVoltage | read-only | current | Represents the battery voltage in 1/100 of volts at which the DHT enters sleep mode. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.1.2 | ScalarcfgWakeUpDeltaVoltage | read-only | current | This MIB displays the voltage offset at which the DHT will wake up from sleep mode wake up voltage = sleep voltage + Delta. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.1.3 | ScalarcfgBatterySaveEnable | read-write | current | This MIB controls the DHT's battery conservation mode. When set to enable, the DHT automatically enters sleep mode when the voltage of a battery falls below th… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.2 | IdentitydhtCfgPsInverterTest | current | This Sub-tree contains the DHT-specific configuration parameters for inverter test mode. | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.2.1 | ScalarcfgPsInvTestAutoStopTimer | read-write | current | This MIB defines the maximum duration of a remote inverter test, in minutes. The transponder uses a default 15-minute period. When the timer reaches the end of… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3 | IdentitydhtCfgPsSetting | current | This Sub-tree contains the PowerSupply specific configuration settings. | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.1 | ScalarcfgPsNominalInputVoltage | read-write | current | This MIB object indicates if the power line input voltage is 120V or 240V. By default, it is set to 120V. This object affects all input Voltage reporting (for … |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.2 | ScalarcfgPsTemperatureCalibrationOffset | read-write | current | This MIB object can be used to increase the accuracy of the psTemperature probe. The value of this MIB (in 1/10 of degrees Celsius) will be added to the hardwa… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.3 | ScalarcfgPsOutputCurrent | read-write | current | This MIB object can be used when a XM2 power supply is set in high output current mode. To follow the power supply mode, you must set this MIB object to high i… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.4 | IdentitydhtCfgUsmUnified | current | This Sub-tree contains usm unifed specific configuration settings. | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.4.1 | ScalarcfgUsmUnifiedMode | read-write | current | This mib can be used to force a specific usm card when the unified cable is in used. auto mode means the dht will perform a discovery at boot up. You must rebo… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.5 | ScalarcfgPsGenericCreation | read-write | current | This MIB object can be used to force the generic power supply creation. Default value is false. The value of this MIB will be stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.1.3.1.2.2.2.3.6 | ScalarcfgPsMeasurementSource | read-write | current | This MIB object allow the user to select the source for the internal measurement on an XM2 power supply. The choice is either to derive the measurement data fr… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.3 | IdentitydhtCfgHMS022 | current | This sections specifies HMS022 specific configuration, it enables the user to enable select the range of HMS022 address supported. | |
| 1.3.6.1.4.1.5802.1.3.1.2.2.3.1 | ScalarcfgStartAddress | read-write | current | This Mib indecates the starting address of device on the TIB. If startAdress and EndAddress are equal, only on device will be monitored The value of this MIB i… |
| 1.3.6.1.4.1.5802.1.3.1.2.2.3.2 | ScalarcfgEndAddress | read-write | current | This Mib indecates the End address of devices on the TIB. if startAdress and EndAddress are equal, only on device will be monitored The value of this MIB is st… |