ELECTROLINE-DHT-TEST-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| ELECTROLINE-DHT-ROOT-MIB | dhtPrivate |
| RFC1213-MIB | DisplayString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5802.1.3.1.2.4.1 | NodedhtTest | |||
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1 | NodedhtAnalogPorts | |||
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1 | TablecurrentAnalogValueTable | not-accessible | current | Provide Read access to Analog Ports |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1 | RowcurrentAnalogValueEntry | not-accessible | current | Analog port index and value |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1.1 | ColumnanalogPortId | read-only | current | Index into analog value table, all analog ports are enumerated together starting at zero. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1.2 | ColumnanalogValue | read-only | current | Returns the current value of the analog port. When calibrated, the displayed value is in the unit used for the calibration settings. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.1.1.3 | ColumnanalogPortIdDesc | read-only | current | Returns the name of the current PortId |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.2 | ScalaranalogCalibrationValue | read-write | current | Calibration value for portID |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.3 | ScalaranalogPortToCalibrate | read-write | current | portID to calibrate: Writes analogCalibrationValue first then sets associated portID. The analogCalibrationCommit must be set after all ports are calibrated to… |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.4 | ScalaranalogCalibrationCommit | read-write | current | Must be set to 1 after all ports are calibrated in order to store the values in non-volatile memory. The Read command always returns the value 0. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.5 | ScalaranalogCalibrationSetDefault | read-write | current | Set this MIB to 1 to reset all the calibration values to the factory default. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6 | TablecurrentCalibrationValueTable | not-accessible | current | Provides Read access to Analog Calibration Table. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1 | RowcurrentCalibrationValueEntry | not-accessible | current | Displays the stored analog calibration table content. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.1 | ColumnanalogCalibrationPortId | read-only | current | Index into analog value table. Each analog port has an entry in the calibration table. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.2 | ColumnrawValue | read-only | current | Returns a rawValue that corresponds to the calibrated value. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.3 | ColumncalibratedValue | read-only | current | Returns the real display value at calibration time. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.1.6.1.4 | ColumncalibratedPortIdDesc | read-only | current | Returns the name of the current PortId. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2 | NodedhtDigitalPorts | |||
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1 | TablecurrentDigitalStatusTable | not-accessible | current | Provides Read access to Digital Status (Input)Ports. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1 | RowcurrentDigitalStatusEntry | not-accessible | current | Digital Status (Input) port index and value. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1.1 | ColumnstatusPortId | read-only | current | Index into digital Status value table. All digital ports are enumerated together starting at zero. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1.2 | ColumnstatusValue | read-only | current | Current value of the port 0: Unknown state (read error) 1: OFF (Inactive) 2: ON (Active) Note that inverse polarity is taken into account. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.1.1.3 | ColumnstatusPortIdDesc | read-only | current | Returns the name of the current PortId. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2 | TablecurrentDigitalControlTable | not-accessible | current | Provides Read/Write access to Digital Control (output) Ports. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1 | RowcurrentDigitalControlEntry | not-accessible | current | Digital Control (output) port index and value. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1.1 | ColumncontrolPortId | read-only | current | Index into digital Control value table. All digital ports are enumerated together starting at zero. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1.2 | ColumncontrolValue | read-write | current | Current value of the digital port 0: Unknown state (Read Error) 1: OFF (Inactive) 2: ON (Active) Note that inverse polarity is taken into account. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.2.2.1.3 | ColumncontrolPortIdDesc | read-only | current | Gives the name of the current PortId |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.3 | NodedhtMicroControllers | |||
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.3.1 | ScalarusmFirmwareVersion | read-only | current | ID & version of the USM micro-controller. The MSB byte represents the firmware ID and the LSB byte the revision number. Unavailable indicates a communication p… |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.3.2 | ScalarbatFirmwareVersion | read-only | current | ID & version of the Battery micro-controller. The MSB byte represents the firmware ID and the LSB byte the revision number. Unavailable indicates a communicati… |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.3.3 | Scalarreset | read-write | current | The Read command returns the last DHT reset cause as follows: 0: Unknown reset cause (= error while reading). 1: Power On reset 2: Hard reset 3: Soft reset 4: … |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.3.4 | ScalarwakeUpVoltage | read-write | current | This is the battery voltage at which the DHT automatically wakes up when a shutdown is requested. The specified voltage units must match the calibrated units f… |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.3.5 | ScalarwakeUpPortId | read-write | current | Enter the portID corresponding to the battery to be monitored. When its voltage rises above the wakeUpVoltage, the DHT restarts. Note that although this was de… |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.4 | NodedhtExternalDevices | |||
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.4.1 | ScalarspiExternalTest | read-only | current | SpiExternalTest returns 1 if an Spi Communication test has failed. The value 2 is returned if an Spi Communication test has passed. |
| 1.3.6.1.4.1.5802.1.3.1.2.4.1.4.2 | ScalarcprTest | read-only | current | CprTest returns 1 if an Spi Communication test has failed. The value 2 is returned if an CprTest has passed. |