ELH100-MIB
130 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52 | Nodecabletron | |||
| 1.3.6.1.4.1.52.259 | NodecabletronOEM | |||
| 1.3.6.1.4.1.52.259.10 | NodecabletronRepeaters | |||
| 1.3.6.1.4.1.52.259.10.3 | NodecabletronELH100 | |||
| 1.3.6.1.4.1.52.259.10.3.1 | NodecabletronELH100Common | |||
| 1.3.6.1.4.1.52.259.10.3.1.1 | Nodeelh100System | |||
| 1.3.6.1.4.1.52.259.10.3.1.1.1 | Scalarelh100MajorVer | read-only | mandatory | Software major version |
| 1.3.6.1.4.1.52.259.10.3.1.1.2 | Scalarelh100MinorVer | read-only | mandatory | Software minor version |
| 1.3.6.1.4.1.52.259.10.3.1.1.3 | Scalarelh100HardwareVer | read-only | mandatory | Hardware version of system board |
| 1.3.6.1.4.1.52.259.10.3.1.2 | Nodeelh100CommunityMgt | |||
| 1.3.6.1.4.1.52.259.10.3.1.2.3 | Tableelh100CommunityTable | not-accessible | mandatory | Community table |
| 1.3.6.1.4.1.52.259.10.3.1.2.3.1 | Rowelh100CommunityEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.1.2.3.1.1 | Columnelh100CommunityIndex | read-only | mandatory | Index in community table. |
| 1.3.6.1.4.1.52.259.10.3.1.2.3.1.2 | Columnelh100CommunityRowCreation | read-write | mandatory | The status of this row entry. Before add a row into table, it should be created first. Set Valid(1) to a row will create this row. To delete a row from this ta… |
| 1.3.6.1.4.1.52.259.10.3.1.2.3.1.3 | Columnelh100CommunityString | read-write | mandatory | The community string that is required for any requests coming from this host. The default value for this object is 'public'. |
| 1.3.6.1.4.1.52.259.10.3.1.2.3.1.4 | Columnelh100CommunityStatus | read-write | mandatory | Access mode of the community. |
| 1.3.6.1.4.1.52.259.10.3.1.3 | Nodeelh100TrapManagerMgt | |||
| 1.3.6.1.4.1.52.259.10.3.1.3.2 | Tableelh100TrapManagerTable | not-accessible | mandatory | A list of IP trap destination entries. |
| 1.3.6.1.4.1.52.259.10.3.1.3.2.1 | Rowelh100TrapMgtEntry | not-accessible | mandatory | A destination entry which defines the IP address to which traps are sent for a community. |
| 1.3.6.1.4.1.52.259.10.3.1.3.2.1.1 | Columnelh100TrapMgtIndex | read-only | mandatory | A value that uniquely identifies this IPTrap Entry. |
| 1.3.6.1.4.1.52.259.10.3.1.3.2.1.2 | Columnelh100TrapMgtRowCreation | read-write | mandatory | The status of this row entry. Before add a row into table, it should be created first. Set valid(1) to a row will create this row. To delete a row from this ta… |
| 1.3.6.1.4.1.52.259.10.3.1.3.2.1.3 | Columnelh100TrapMgtCommunityString | read-write | mandatory | A community name to which this destination IP address belongs. |
| 1.3.6.1.4.1.52.259.10.3.1.3.2.1.4 | Columnelh100TrapMgtIpAddress | read-write | mandatory | The IP address to send traps to on behalf of this entry. |
| 1.3.6.1.4.1.52.259.10.3.1.4 | Nodeelh100DownloadMgt | |||
| 1.3.6.1.4.1.52.259.10.3.1.4.1 | Scalarelh100DownloadServerIP | read-write | mandatory | The file server of the download file |
| 1.3.6.1.4.1.52.259.10.3.1.4.2 | Scalarelh100DownloadFilename | read-write | mandatory | The file name to download |
| 1.3.6.1.4.1.52.259.10.3.1.4.3 | Scalarelh100DownloadMode | read-write | mandatory | Permanent upgrade stores download software into permanent storage of the agent device. Temporary upgrade just put download software in RAM, often for a test on… |
| 1.3.6.1.4.1.52.259.10.3.1.4.4 | Scalarelh100DownloadAction | read-write | mandatory | elh100DownloadAction triggers the download operation. The run option starts new software execution after download is complete. The noRun option does not start … |
| 1.3.6.1.4.1.52.259.10.3.1.5 | Scalarelh100Restart | read-write | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.2 | NodecabletronELH100BasicCapability | |||
| 1.3.6.1.4.1.52.259.10.3.2.1 | NodecabletronELH100StackInfo | |||
| 1.3.6.1.4.1.52.259.10.3.2.1.1 | ScalarstackInusedIP | read-only | mandatory | The IP address which is in used in the Dual-Speed Hub system. |
| 1.3.6.1.4.1.52.259.10.3.2.1.2 | ScalarstackInusedNetMask | read-only | mandatory | The subnet mask which is in used in the Dual-Speed Hub system. |
| 1.3.6.1.4.1.52.259.10.3.2.1.3 | ScalarstackInusedGateway | read-only | mandatory | The prefered gateway used to send traps. |
| 1.3.6.1.4.1.52.259.10.3.2.1.4 | ScalarstackBootpIP | read-only | mandatory | The IP address of the BOOTP server that last responded. If no BOOP server has responded, then this object will be '0.0.0.0'. |
| 1.3.6.1.4.1.52.259.10.3.2.1.5 | ScalarstackTemporalIP | read-write | mandatory | Used to change the IP address of the Dual-Speed Hub system. |
| 1.3.6.1.4.1.52.259.10.3.2.1.6 | ScalarstackTemporalNetMask | read-write | mandatory | Used to change the subnet mask of the Dual-Speed Hub system. |
| 1.3.6.1.4.1.52.259.10.3.2.1.7 | ScalarstackTemporalGateway | read-write | mandatory | Used to change the prefered gateway to send traps. |
| 1.3.6.1.4.1.52.259.10.3.2.1.8 | ScalarstackBootpEnable | read-write | mandatory | This object allows the users to enable/disable generation of BOOTP requests. |
| 1.3.6.1.4.1.52.259.10.3.2.1.9 | ScalaripInformationReset | read-write | mandatory | Setting the stackIP, stackNetMask,stackGateway, and stackBootUpIP will not make these parameters take effect immediately. They will take effect when ipInformat… |
| 1.3.6.1.4.1.52.259.10.3.2.1.10 | ScalarstackHealthMonitor | read-only | mandatory | < FOR cabletronELH100 Dual-Speed Hub DEFINITION : > There are two kinds of hub : 12 ports need (1+ 12 + 1 + 1 + 1 + 1 +1 +1 +1) 20 bytes and 24 ports need (1+ … |
| 1.3.6.1.4.1.52.259.10.3.2.2 | NodecabletronELH100AgentInfo | |||
| 1.3.6.1.4.1.52.259.10.3.2.2.1 | ScalarnicAttachSegment | read-write | mandatory | The ifIndex of the segment to which the agent's Ethernet NIC (Network Interface Controller) is connected. ifIndex 1 is the 100Mbps NIC; ifIndex 2 is the 10Mbps… |
| 1.3.6.1.4.1.52.259.10.3.2.2.2 | TableserialNumberTable | not-accessible | mandatory | This table defines the unit serial numbers tracked by the agent. A maximum of 6 serial numbers are tracked. |
| 1.3.6.1.4.1.52.259.10.3.2.2.2.1 | RowserialNumberEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.2.2.2.1.1 | ColumnsNIndex | read-only | mandatory | The index of the serial number being referenced. Indexes are always sequential, starting with 1. |
| 1.3.6.1.4.1.52.259.10.3.2.2.2.1.2 | ColumnserialNumber | read-only | mandatory | The serial number. Every ELH100 unit has a unique serial number. |
| 1.3.6.1.4.1.52.259.10.3.2.2.2.1.3 | ColumnsNCurrentUnitID | read-only | mandatory | The current unit ID of the unit with this serial number. If the unit with this serial number is not currently in the stack, this object's value is 255. If this… |
| 1.3.6.1.4.1.52.259.10.3.2.2.3 | ScalartelnetMaxSessions | read-write | mandatory | The maximum number of Telnet sessions that may be active at one time. The factory setting is 2. |
| 1.3.6.1.4.1.52.259.10.3.2.2.4 | ScalartelnetAutoLogoutEnable | read-write | mandatory | Setting this object to enabled(1) causes the agent to automatically close Telnet sessions when no activity has occurred for telnetAutoLogoutTimeout minutes. Se… |
| 1.3.6.1.4.1.52.259.10.3.2.2.5 | ScalartelnetAutoLogoutTimeout | read-write | mandatory | The number of minutes of inactivity after which the agent may automatically close a Telnet session. Telnet auto-logout is active only when telnetAutoLogoutEnab… |
| 1.3.6.1.4.1.52.259.10.3.2.2.6 | ScalarvT100RefreshInterval | read-write | mandatory | The interval for automatic statistics refresh for VT100 screens. The factory setting is seconds30(30). |
| 1.3.6.1.4.1.52.259.10.3.2.3 | NodecabletronELH100gGroupInfo | |||
| 1.3.6.1.4.1.52.259.10.3.2.3.1 | TablegroupTable | not-accessible | mandatory | This table defines basic configuration information for each unit in the stack. |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1 | RowgroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.1 | ColumngroupID | read-only | mandatory | The group ID of the group being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent groups a… |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.2 | ColumngroupType | read-only | mandatory | The type of group. |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.3 | ColumngroupCounterReset | read-write | mandatory | Setting this object to reset(2) causes the agent to reset all RFC1757 and RFC2108 counters for all ports on this group. This object always returns noReset(1) w… |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.4 | ColumnmgmtModuleStatus | read-only | mandatory | The status of this group's management module. Only one management module in a stack is allowed to act as the active agent. A value of notPresent(1) indicates t… |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.5 | ColumnmgmtModuleDatabaseVersion | read-only | mandatory | The configuration database version number of this managing agent. If a management module is not present, this object's value is a zero-length string. Each mana… |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.6 | ColumnswitchModuleType | read-only | mandatory | The type of the switch module. |
| 1.3.6.1.4.1.52.259.10.3.2.3.1.1.7 | ColumnswitchModuleActive | read-only | mandatory | Indicates whether or not a switch module is active. In order to avoid network loops, the switch hardware allows only one switch to bridge the stack's common 10… |
| 1.3.6.1.4.1.52.259.10.3.2.3.2 | TablebackplaneTable | not-accessible | mandatory | This table provides backplane isolation/connection status for each unit's 100Mbps and 10Mbps segments. |
| 1.3.6.1.4.1.52.259.10.3.2.3.2.1 | RowbackplaneEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.2.3.2.1.1 | ColumnbackplaneGroupID | read-only | mandatory | The group ID of the segment being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent groups… |
| 1.3.6.1.4.1.52.259.10.3.2.3.2.1.2 | ColumnbackplaneSegmentID | read-only | mandatory | The segment ID of the segment being referenced. |
| 1.3.6.1.4.1.52.259.10.3.2.3.2.1.3 | ColumnbackplaneIsolated | read-write | mandatory | The status of the segment's connection to the backplane bus. The factory setting is attached(2). |
| 1.3.6.1.4.1.52.259.10.3.2.4 | NodecabletronELH100PortInfo | |||
| 1.3.6.1.4.1.52.259.10.3.2.4.1 | TableportTable | not-accessible | mandatory | This table defines basic configuration information for each repeater port in the stack. |
| 1.3.6.1.4.1.52.259.10.3.2.4.1.1 | RowportEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.2.4.1.1.1 | ColumnportGroupID | read-only | mandatory | The group ID of the repeater port being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent … |
| 1.3.6.1.4.1.52.259.10.3.2.4.1.1.2 | ColumnportID | read-only | mandatory | The port ID of the repeater port being referenced. |
| 1.3.6.1.4.1.52.259.10.3.2.4.1.1.3 | ColumnportLinkSpeed | read-only | mandatory | The speed at which the port is currently operating. If there is no link on the port, this object returns noLink(1). |
| 1.3.6.1.4.1.52.259.10.3.2.4.1.1.4 | ColumnportSpeedConfig | read-write | mandatory | Selects the speed at which the port operates. The factory setting is autoNegotiate(1). |
| 1.3.6.1.4.1.52.259.10.3.3 | NodecabletronELH100PerfMonCapability | |||
| 1.3.6.1.4.1.52.259.10.3.3.1 | NodecabletronELH100PerfMonAgentInfo | |||
| 1.3.6.1.4.1.52.259.10.3.3.1.1 | ScalarperfMonAgentCRCErrors | read-only | mandatory | The number of valid-length packets with CRC errors received on the agent's MAC port. |
| 1.3.6.1.4.1.52.259.10.3.3.1.2 | ScalarperfMonAgentAlignmentErrors | read-only | mandatory | The number of valid-length packets with alignment errors received on the agent's MAC port. |
| 1.3.6.1.4.1.52.259.10.3.3.1.3 | ScalarperfMonAgentCollisions | read-only | mandatory | The number of collisions detected on the agent's MAC port. |
| 1.3.6.1.4.1.52.259.10.3.3.1.4 | ScalarperfMonAgentTotalPortIsolates | read-only | mandatory | The number of times the agent's MAC port became isolated. Port isolation occurs only during 100Mbps operation. |
| 1.3.6.1.4.1.52.259.10.3.3.1.5 | ScalarperfMonAgentSymbolErrors | read-only | mandatory | The number of packets with symbol errors received on the agent's MAC port. Symbol errors occur only during 100Mbps operation. |
| 1.3.6.1.4.1.52.259.10.3.4 | NodecabletronELH100SwitchCapability | |||
| 1.3.6.1.4.1.52.259.10.3.4.1 | NodecabletronELH100SwitchInfo | |||
| 1.3.6.1.4.1.52.259.10.3.4.1.1 | TableswitchPortTable | not-accessible | mandatory | This table provides configuration information about each port on each switch module in the stack. |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1 | RowswitchPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1.1 | ColumnswitchPortGroupID | read-only | mandatory | The group ID of the switch module port being referenced. Groups are numbered in top-down order, with the top group being group 1. If a switch module is not ins… |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1.2 | ColumnswitchPortID | read-only | mandatory | The port ID of the switch module port being referenced. Port 1 is always the internal 100Mbps port. Port 2 is always the internal 10Mbps port; note that this p… |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1.3 | ColumnswitchPortAdminStatus | read-write | mandatory | The administrative status of the port. Setting this object to enabled(1) enables the port. Setting this object to disabled(2) disables the port. On media modul… |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1.4 | ColumnswitchPortSpeed | read-only | mandatory | The speed at which the switch port is currently operating. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), noLink(1) i… |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1.5 | ColumnswitchPortDuplex | read-only | mandatory | The duplex mode in which the switch port is currently operating. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), notAp… |
| 1.3.6.1.4.1.52.259.10.3.4.1.1.1.6 | ColumnswitchPortLink | read-only | mandatory | Indicates if link is detected on the port. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), noLink(2) is returned. |
| 1.3.6.1.4.1.52.259.10.3.4.2 | NodecabletronELH100SwitchStatsInfo | |||
| 1.3.6.1.4.1.52.259.10.3.4.2.1 | TableswitchPortStatsTable | not-accessible | mandatory | This table provides statistics on each port on each switch module in the stack. Note that statistics for the external port on media and switch/media modules ar… |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1 | RowswitchPortStatsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.1 | ColumnswitchPortStatsGroupID | read-only | mandatory | The group ID of the switch module port being referenced. If the group is not present, or if there is no switch module installed in the group, GetRequests and S… |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.2 | ColumnswitchPortStatsID | read-only | mandatory | The port ID of the switch module port being referenced. Port 1 is always the internal 100Mbps port. Port 2 is always the internal 10Mbps port. Port 3 is always… |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.3 | ColumnswitchPortReadableFrames | read-only | mandatory | The number of valid frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.4 | ColumnswitchPortReadableOctets | read-only | mandatory | The number of octets (bytes) in all valid frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.5 | ColumnswitchPortFCSErrors | read-only | mandatory | The number of valid-length frames received by the port that had FCS (frame check sequence) errors. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.6 | ColumnswitchPortAlignmentErrors | read-only | mandatory | The number of valid-length frames received by the port that had alignment errors. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.7 | ColumnswitchPortFramesTooLong | read-only | mandatory | The number of frames received by the port that were longer than 1518 bytes. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.8 | ColumnswitchPortShortEvents | read-only | mandatory | The number of frames received by the port that were shorter than 82 bits. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.9 | ColumnswitchPortRunts | read-only | mandatory | The number of frames received by the port that were longer than 82 bits but shorter than 512 bits (64 bytes). |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.10 | ColumnswitchPortCollisions | read-only | mandatory | The number of collisions detected on the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.11 | ColumnswitchPortLateEvents | read-only | mandatory | The number of collisions detected on the port that occurred later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.12 | ColumnswitchPortVeryLongEvents | read-only | mandatory | The number of times any activity continued for more than 4 to 7.5 milliseconds. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.13 | ColumnswitchPortDataRateMismatches | read-only | mandatory | The number of times the incoming data rate mismatched the local clock source enough to cause a FIFO overflow or underflow. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.14 | ColumnswitchPortAutoPartitions | read-only | mandatory | The number of times this port was auto-partitioned by the hardware. In 100Mbps mode, a port auto-partitions when it detects more than 60 consecutive collisions… |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.15 | ColumnswitchPortBroadcastPackets | read-only | mandatory | The number of good broadcast frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.16 | ColumnswitchPortMulticastPackets | read-only | mandatory | The number of good multicast (not broadcast) frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.17 | ColumnswitchPortIsolates | read-only | mandatory | The number of times this port was auto-isolated by the hardware. This occurs only during 100Mbps operation. A port auto-isolates when it transmits more than 2 … |
| 1.3.6.1.4.1.52.259.10.3.5 | NodecabletronELH100BackupCapability | |||
| 1.3.6.1.4.1.52.259.10.3.5.1 | NodecabletronELH100BackupInfo | |||
| 1.3.6.1.4.1.52.259.10.3.5.1.1 | TablebackupPortTable | not-accessible | mandatory | This table allows configuration of backup port pairs. |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1 | RowbackupPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1.1 | ColumnbackupIndex | read-only | mandatory | The index of the Backup table entry being referenced. Indexes may be nonconsecutive. |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1.2 | ColumnbackupPriPortGroup | read-write | mandatory | Group ID of the primary port. Attempts to set this object to a nonexistent group are rejected with an error-status of badValue(3). If this object belongs to an… |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1.3 | ColumnbackupPriPortPort | read-write | mandatory | Port number of the primary port. Attempts to set this object to a nonexistent port are rejected with an error-status of badValue(3). If this object belongs to … |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1.4 | ColumnbackupSecPortGroup | read-write | mandatory | Group ID of the secondary port. The secondary port may be on any group in the stack. Attempts to set this object to a nonexistent unit are rejected with an err… |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1.5 | ColumnbackupSecPortPort | read-write | mandatory | Port number of the secondary port. Attempts to set this object to a nonexistent port are rejected with an error-status of badValue(3). If this object belongs t… |
| 1.3.6.1.4.1.52.259.10.3.5.1.1.1.6 | ColumnbackupPortAction | read-write | mandatory | The status of backup port monitoring for this port pair. Setting this object to active(2) enables the primary port, disables the secondary port, and activates … |
| 1.3.6.1.4.1.52.259.10.3.6 | NodecabletronELH100SecurityCapability | |||
| 1.3.6.1.4.1.52.259.10.3.6.1 | NodecabletronELH100SecurityInfo | |||
| 1.3.6.1.4.1.52.259.10.3.6.1.1 | TablesecurityTable | not-accessible | mandatory | This table allows configuration of port-level intrusion detection. |
| 1.3.6.1.4.1.52.259.10.3.6.1.1.1 | RowsecurityEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.259.10.3.6.1.1.1.1 | ColumnsecurityGroupID | read-only | mandatory | The group ID of the port being referenced. Groups are numbered in top-down order, with the top group being group 1. Attempts to reference nonexistent units are… |
| 1.3.6.1.4.1.52.259.10.3.6.1.1.1.2 | ColumnsecurityPortID | read-only | mandatory | The port ID of the port being referenced. Attempts to reference nonexistent ports are rejected with an error-status of noSuchName(2). |
| 1.3.6.1.4.1.52.259.10.3.6.1.1.1.3 | ColumnsecurityAddr | read-write | mandatory | The authorized MAC address for this port. This address may be configured through auto-learning if securityAutoLearnAction is set to active(2). Otherwise, the a… |
| 1.3.6.1.4.1.52.259.10.3.6.1.1.1.4 | ColumnsecurityAutoLearnAction | read-write | mandatory | Selects the auto-learning function for the port. Setting this object to inactive(1) disables auto-learning; the user must set securityAddr in order to specify … |
| 1.3.6.1.4.1.52.259.10.3.6.1.1.1.5 | ColumnsecurityEnable | read-write | mandatory | Setting this object to warningAndDisable(2) enables intrusion detection on the port. When an intruder is detected, a RFC2108 rptrInfoHealth trap is transmitted… |