ELTEX-SMI
100 objects
The Structure of Management Information for Eltex Networks.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.34300 | Identityeltex | The Structure of Management Information for Eltex Networks. | ||
| 1.3.6.1.4.1.34300.1 | IdentityelHardware | current | The root of eltex hardware OIDs. | |
| 1.3.6.1.4.1.34300.2 | IdentityelSoftware | current | The root of eltex software OIDs. | |
| 1.3.6.1.4.1.34300.3 | IdentityeltrapGroup | current | The root of eltex traps objects. | |
| 1.3.6.1.4.1.34300.3.3 | Nodemc240AlarmTraps | |||
| 1.3.6.1.4.1.34300.3.3.1 | Notificationmc240StreamAlarmTrap | current | mc-240 stream alarm trap. Severity: alert | |
| 1.3.6.1.4.1.34300.3.3.2 | Notificationmc240SyncAlarmTrap | current | mc-240 sync alarm trap. Severity: warning | |
| 1.3.6.1.4.1.34300.3.3.3 | Notificationmc240ss7LinkAlarmTrap | current | mc-240 ss7 link alarm trap. Severity: alert | |
| 1.3.6.1.4.1.34300.3.3.4 | Notificationmc240ss7LinksetAlarmTrap | current | mc-240 ss7 linkset alarm trap. Severity: critical | |
| 1.3.6.1.4.1.34300.3.3.5 | Notificationmc240FileAlarmTrap | current | mc-240 file alarm trap. Severity: critical | |
| 1.3.6.1.4.1.34300.3.3.6 | Notificationmc240CardAlarmTrap | current | mc-240 card alarm trap. Severity: critical | |
| 1.3.6.1.4.1.34300.3.3.7 | NotificationmxlDPSAlarmTrap | current | mxl DSL DP system alarm trap | |
| 1.3.6.1.4.1.34300.3.3.8 | NotificationmxlTELEAlarmTrap | current | mxl DSL DP system alarm trap | |
| 1.3.6.1.4.1.34300.3.3.9 | Notificationmc240UPSAlarmTrap | current | mc240 UPS alarm trap | |
| 1.3.6.1.4.1.34300.3.3.10 | Notificationmc240SensAlarmTrap | current | mc240 sensor alarm trap (mcTrapExState = sensors bit mask, param1=temp,C, param2=Hum,%) | |
| 1.3.6.1.4.1.34300.3.3.11 | NotificationdslamLinkDownTrap | current | dslam link down trap (mcTrapExState = link state, param1 = ADSLport) | |
| 1.3.6.1.4.1.34300.3.3.12 | NotificationdslamDSRateAlarmTrap | current | Downstream rate for dslam ADSL port change (mcTrapExState = 2-increase 1-decrease, param1 = ADSLport) | |
| 1.3.6.1.4.1.34300.3.3.13 | NotificationdslamUSRateAlarmTrap | current | Downstream rate for dslam ADSL port change (mcTrapExState = 2-increase 1-decrease, param1 = ADSLport) | |
| 1.3.6.1.4.1.34300.3.3.14 | NotificationponONUAuthAlarmTrap | current | Bad registration ONU Event (mcTrapLParam1=Optical Interface Number, mcTrapDescr='description with MAC addr ONU') | |
| 1.3.6.1.4.1.34300.3.3.15 | NotificationponEthAlarmTrap | current | Eth Link Down, mcTrapLParam1=Link Number, Description='GePON: Eth Link N down' | |
| 1.3.6.1.4.1.34300.3.3.16 | NotificationponOpticalAlarmTrap | current | The optical link N (mcTrapLParam1) has no active devices | |
| 1.3.6.1.4.1.34300.3.3.17 | NotificationdslamOverheatAlarmTrap | current | overheat (mcTrapExState = 1 -> DSP, = 2 -> PWR, param1 = val of temp * 10) | |
| 1.3.6.1.4.1.34300.3.3.18 | NotificationdslamVoltageAlarmTrap | current | when voltage deviation become more 10% (param1 = number of voltage nominal mean 12, -12, 3.3, 2.5, 1.8, 1.25, 1.5, 1 correspondly, param2 - whole number part t… | |
| 1.3.6.1.4.1.34300.3.3.19 | NotificationdslamSessionAlarmTrap | current | Trap sending when connection happen, mcTrapLParam1 - means connection from (0)-CLI (1)->Webs (2)->SNMP | |
| 1.3.6.1.4.1.34300.3.3.20 | NotificationdslamEthLinkAlarmTrap | current | Trap sending when switch port link DOWN, mcTrapLParam1 - means port num: for mxa: 0 - p0; 1 - p1; 2 - p2; 3 - cpu; 4 - dsl0; 5 - sfp; 6 - dsl1; for asl: 0 - la… | |
| 1.3.6.1.4.1.34300.3.4 | Nodemc240OkTraps | |||
| 1.3.6.1.4.1.34300.3.4.1 | Notificationmc240StreamOkTrap | current | mc-240 stream ok trap. Severity: alert | |
| 1.3.6.1.4.1.34300.3.4.2 | Notificationmc240SyncOkTrap | current | mc-240 sync ok trap. Severity: warning | |
| 1.3.6.1.4.1.34300.3.4.3 | Notificationmc240ss7LinkOkTrap | current | mc-240 ss7 link ok trap. Severity: alert | |
| 1.3.6.1.4.1.34300.3.4.4 | Notificationmc240ss7LinksetOkTrap | current | mc-240 ss7 linkset ok trap. Severity: critical | |
| 1.3.6.1.4.1.34300.3.4.5 | Notificationmc240FileOkTrap | current | mc-240 file ok trap. Severity: critical | |
| 1.3.6.1.4.1.34300.3.4.6 | Notificationmc240CardOkTrap | current | mc-240 card trap. Severity: critical | |
| 1.3.6.1.4.1.34300.3.4.7 | NotificationmxlDPSOkTrap | current | mxl DSL DP system alarm trap (normal state) | |
| 1.3.6.1.4.1.34300.3.4.8 | NotificationmxlTELEOkTrap | current | mxl DSL DP system alarm trap (normal state) | |
| 1.3.6.1.4.1.34300.3.4.9 | Notificationmc240UPSOkTrap | current | mc240 UPS alarm trap (normal state) | |
| 1.3.6.1.4.1.34300.3.4.10 | Notificationmc240SensOkTrap | current | mc240 sensor alarm trap (normal state) | |
| 1.3.6.1.4.1.34300.3.4.11 | NotificationdslamLinkUpTrap | current | dslam link up trap (mcTrapExState = link state == 0, param1 = ADSLport) | |
| 1.3.6.1.4.1.34300.3.4.12 | NotificationdslamDSRateOkTrap | current | Downstream rate for dslam ADSL port change (mcTrapExState = 0-reate not change, param1 = ADSLport) | |
| 1.3.6.1.4.1.34300.3.4.13 | NotificationdslamUSRateOkTrap | current | Downstream rate for dslam ADSL port change (mcTrapExState = 0-reate not change, param1 = ADSLport) | |
| 1.3.6.1.4.1.34300.3.4.14 | NotificationponONUAuthOkTrap | current | Normal registration ONU Event (mcTrapLParam1=Optical Interface Number, mcTrapDescr='description with MAC addr ONU') | |
| 1.3.6.1.4.1.34300.3.4.15 | NotificationponEthOkTrap | current | Eth Link Up, mcTrapLParam1=Link Number, Description='GePON: Eth Link N up' | |
| 1.3.6.1.4.1.34300.3.4.16 | NotificationponOpticalOkTrap | current | The optical link N (mcTrapLParam1) has M (mcTrapLParam2) active devices | |
| 1.3.6.1.4.1.34300.3.4.17 | NotificationdslamOverheatOkTrap | current | overheat (mcTrapExState = 1 -> DSP, = 2 -> PWR, param1 = val of temp * 10) | |
| 1.3.6.1.4.1.34300.3.4.18 | NotificationdslamVoltageOkTrap | current | when voltage deviation become less 10% (param1 = number of voltage nominal mean 12, -12, 3.3, 2.5, 1.8, 1.25, 1.5, 1 correspondly, param2 - whole number part t… | |
| 1.3.6.1.4.1.34300.3.4.19 | NotificationdslamSessionOkTrap | current | Trap sending when connection closed, mcTrapLParam1 - means disconnection from (0)-CLI (1)->Webs (2)->SNMP | |
| 1.3.6.1.4.1.34300.3.4.20 | NotificationdslamEthLinkOkTrap | current | Trap sending when switch port link UP, mcTrapLParam1 - means port num: for mxa: 0 - p0; 1 - p1; 2 - p2; 3 - cpu; 4 - dsl0; 5 - sfp; 6 - dsl1; for asl: 0 - lan;… | |
| 1.3.6.1.4.1.34300.3.5 | Nodemc240TrapTypes | |||
| 1.3.6.1.4.1.34300.3.5.1 | ScalarmcTrapExState | read-only | current | state (additional state) |
| 1.3.6.1.4.1.34300.3.5.2 | ScalarmcTrapLParam1 | read-only | current | param-1 (slot or index) |
| 1.3.6.1.4.1.34300.3.5.3 | ScalarmcTrapLParam2 | read-only | current | param-2 (port or index) |
| 1.3.6.1.4.1.34300.3.5.4 | ScalarmcTrapLParam3 | read-only | current | param-3 (other index) |
| 1.3.6.1.4.1.34300.3.5.5 | ScalarmcTrapID | read-only | current | ID (pbx trap id) |
| 1.3.6.1.4.1.34300.3.5.6 | ScalarmcTrapDescr | read-only | current | Alarm description |
| 1.3.6.1.4.1.34300.3.5.7 | ScalarmcTrapRestoredAlarmID | read-only | current | If this restore event then here writed Alarm ID. If this alarm event then mcTrapRestoredAlarmID=0. |
| 1.3.6.1.4.1.34300.3.5.8 | ScalarmcTrapSyncType | read-only | current | Type of trap: 0 - Normal; 1 - Journal alarms; 2 - Active alarms |
| 1.3.6.1.4.1.34300.3.5.9 | ScalarmcReservedFlag | read-only | current | Reserved flag |
| 1.3.6.1.4.1.34300.3.8 | Nodemp800mkAlarmTraps | |||
| 1.3.6.1.4.1.34300.3.8.1 | Notificationmp800mkMPStatusAlarmTrap | current | MP operation error. | |
| 1.3.6.1.4.1.34300.3.8.2 | Notificationmp800mkInpParmAlarmTrap | current | Incorrect input parameters. | |
| 1.3.6.1.4.1.34300.3.8.3 | Notificationmp800mkUEPConfAlarmTrap | current | UEP configuration error. | |
| 1.3.6.1.4.1.34300.3.8.4 | Notificationmp800mkTMAlarmTrap | current | Temperature measurement error. | |
| 1.3.6.1.4.1.34300.3.8.5 | Notificationmp800mkACVMAlarmTrap | current | ACV measurement error. | |
| 1.3.6.1.4.1.34300.3.8.6 | Notificationmp800mkIbatMAlarmTrap | current | Battery current measurement error. | |
| 1.3.6.1.4.1.34300.3.8.7 | Notificationmp800mkVbatMAlarmTrap | current | Battery voltage measurement error. | |
| 1.3.6.1.4.1.34300.3.8.8 | Notificationmp800mkVbatChAlarmTrap | current | Can't change (increase or decrease) battery voltage. | |
| 1.3.6.1.4.1.34300.3.8.9 | Notificationmp800mkRlsDevAlarmTrap | current | Release device is off (battery disconnected). | |
| 1.3.6.1.4.1.34300.3.8.10 | Notificationmp800mkDVcellAlarmTrap | current | Battery cell voltage spread is out of range. | |
| 1.3.6.1.4.1.34300.3.8.11 | Notificationmp800mkACVAlarmTrap | current | AC voltage is out of range. | |
| 1.3.6.1.4.1.34300.3.8.12 | Notificationmp800mkBatChargeAlarmTrap | current | Battery is close to total discharge. | |
| 1.3.6.1.4.1.34300.3.8.13 | Notificationmp800mkIloadAlarmTrap | current | Load current is out of range. | |
| 1.3.6.1.4.1.34300.3.8.14 | Notificationmp800mkIbatChAlarmTrap | current | Battery charge current is too high. | |
| 1.3.6.1.4.1.34300.3.8.15 | Notificationmp800mkSuppAlarmTrap | current | Power supply from battery. | |
| 1.3.6.1.4.1.34300.3.8.16 | Notificationmp800mkBatConnAlarmTrap | current | Battery is disconnected from MPs' output. | |
| 1.3.6.1.4.1.34300.3.9 | Nodemp800mkOkTraps | |||
| 1.3.6.1.4.1.34300.3.9.1 | Notificationmp800mkMPStatusOkTrap | current | MP operation OK. | |
| 1.3.6.1.4.1.34300.3.9.2 | Notificationmp800mkInpParmOkTrap | current | Input parameters OK. | |
| 1.3.6.1.4.1.34300.3.9.3 | Notificationmp800mkUEPConfOkTrap | current | UEP configuration OK. | |
| 1.3.6.1.4.1.34300.3.9.4 | Notificationmp800mkTMOkTrap | current | Temperature measurement OK. | |
| 1.3.6.1.4.1.34300.3.9.5 | Notificationmp800mkACVMOkTrap | current | ACV measurement OK. | |
| 1.3.6.1.4.1.34300.3.9.6 | Notificationmp800mkIbatMOkTrap | current | Battery current measurement OK. | |
| 1.3.6.1.4.1.34300.3.9.7 | Notificationmp800mkVbatMOkTrap | current | Battery voltage measurement OK. | |
| 1.3.6.1.4.1.34300.3.9.8 | Notificationmp800mkVbatChOkTrap | current | Battery voltage changing OK. | |
| 1.3.6.1.4.1.34300.3.9.9 | Notificationmp800mkRlsDevOkTrap | current | Release device is on. | |
| 1.3.6.1.4.1.34300.3.9.10 | Notificationmp800mkDVcellOkTrap | current | Battery cell voltage spread is in range. | |
| 1.3.6.1.4.1.34300.3.9.11 | Notificationmp800mkACVOkTrap | current | AC voltage is in range. | |
| 1.3.6.1.4.1.34300.3.9.12 | Notificationmp800mkBatChargeOkTrap | current | Battery charge status is OK. | |
| 1.3.6.1.4.1.34300.3.9.13 | Notificationmp800mkIloadOkTrap | current | Load current is in range. | |
| 1.3.6.1.4.1.34300.3.9.14 | Notificationmp800mkIbatChOkTrap | current | Battery charge current is in range. | |
| 1.3.6.1.4.1.34300.3.9.15 | Notificationmp800mkSuppOkTrap | current | Power supply from MPs. | |
| 1.3.6.1.4.1.34300.3.9.16 | Notificationmp800mkBatConnOkTrap | current | Battery is connected to MPs' output. | |
| 1.3.6.1.4.1.34300.3.10 | Nodemp800mkTrapTypes | |||
| 1.3.6.1.4.1.34300.3.10.1 | Scalarmp800mkTrapParameter | read-only | current | Parameter (V, I, T, etc...) |
| 1.3.6.1.4.1.34300.3.10.2 | Scalarmp800mkTrapValue | read-only | current | Value (X mV, Y mA, Z grad, etc...) |
| 1.3.6.1.4.1.34300.3.10.3 | Scalarmp800mkTrapComment | read-only | current | Comment (V is out of range [Vmin ... Vmax]!, etc...) |
| 1.3.6.1.4.1.34300.3.20 | NodeomsOperationAlarmTraps | |||
| 1.3.6.1.4.1.34300.3.20.1 | NotificationomsOperationCommandAlarm | current | mcTrapLParam1 = command <upload=1, download=2, apply=3, confirm=4, save=5>; mcTrapLParam2 = filetype <pattern=1, private=2, binary=3> mcTrapDescr = Description… | |
| 1.3.6.1.4.1.34300.3.21 | NodeomsOperationOkTraps | |||
| 1.3.6.1.4.1.34300.3.21.1 | NotificationomsOperationCommandOk | current | mcTrapLParam1 = command <upload=1, download=2, apply=3, confirm=4, save=5>; mcTrapLParam2 = filetype <pattern=1, private=2, binary=3> mcTrapDescr = Description… | |
| 1.3.6.1.4.1.34300.3.100 | GroupeltrapNotificationGroup | current | ||
| 1.3.6.1.4.1.34300.3.101 | GroupeltrapObjectGroup | current |