MIB Viewer

EMD-MIB

201 objects
This MIB describes the SNMP functions of the EMX Environmental Monitoring Device by Raritan Computer.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType InetPortNumber
RFC1213-MIBsysContact sysLocation sysName
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIenterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString MacAddress TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.13742IdentityraritanforThis MIB describes the SNMP functions of the EMX Environmental Monitoring Device by Raritan Computer.
1.3.6.1.4.1.13742.8Nodeemd
1.3.6.1.4.1.13742.8.0Nodetraps
1.3.6.1.4.1.13742.8.0.0NodetrapInformation
1.3.6.1.4.1.13742.8.0.0.1ScalaruserNameread-onlycurrentThe user currently logged in.
1.3.6.1.4.1.13742.8.0.0.2ScalartargetUserread-onlycurrentThe user added, deleted, or modified.
1.3.6.1.4.1.13742.8.0.0.3ScalarimageVersionread-onlycurrentThe version of the upgrade image.
1.3.6.1.4.1.13742.8.0.0.4ScalarroleNameread-onlycurrentThe role added, deleted, or modified.
1.3.6.1.4.1.13742.8.0.0.5ScalarsmtpMessageRecipientsread-onlycurrentComma separated list of SMTP Message recipients
1.3.6.1.4.1.13742.8.0.0.6ScalarsmtpServerread-onlycurrentThe IP address/host name of the SMTP server
1.3.6.1.4.1.13742.8.0.0.7ScalaroldSensorStateaccessible-for-notifycurrentThe old sensor state used in Sensor State Transition traps.
1.3.6.1.4.1.13742.8.0.0.8ScalarexternalSensorNumberaccessible-for-notifycurrentA unique value for each sensor. Its value ranges between 1 and the value of externalSensorCount.
1.3.6.1.4.1.13742.8.0.0.9ScalartypeOfSensoraccessible-for-notifycurrentThe type of sensor.
1.3.6.1.4.1.13742.8.0.0.10ScalarerrorDescriptionaccessible-for-notifycurrentDescription of the Error
1.3.6.1.4.1.13742.8.0.0.11ScalardeviceChangedParameteraccessible-for-notifycurrentDescription of the parameter(s) that changed.
1.3.6.1.4.1.13742.8.0.0.12ScalarchangedParameterNewValueaccessible-for-notifycurrentThe new value of the changed parameter
1.3.6.1.4.1.13742.8.0.0.13ScalarlhxSupportEnabledaccessible-for-notifycurrentThe new enabled state for Schroff LHX Support.
1.3.6.1.4.1.13742.8.0.0.14ScalarwebcamModelaccessible-for-notifycurrentThe model of the Webcam
1.3.6.1.4.1.13742.8.0.0.15ScalarwebcamConnectionPortaccessible-for-notifycurrentThe port to which the Webcam is connected
1.3.6.1.4.1.13742.8.0.0.16ScalarperipheralDeviceRomcodeaccessible-for-notifycurrentThe Romcode of an peripheral device
1.3.6.1.4.1.13742.8.0.0.17ScalarperipheralDeviceFirmwareUpdateStateaccessible-for-notifycurrentThe firmware update state of an peripheral device
1.3.6.1.4.1.13742.8.0.0.18ScalaragentInetPortNumberaccessible-for-notifycurrentThe UDP port number used for accessing the SNMP agent on the device. Examples: If deviceCascadeType is portForwarding, then master: 50500 slave 1:50501 slave 2…
1.3.6.1.4.1.13742.8.0.0.19ScalarphoneNumberaccessible-for-notifycurrentThe phone number of e.g. an SMS receiver.
1.3.6.1.4.1.13742.8.0.1NotificationsystemStartedcurrentThe system has started.
1.3.6.1.4.1.13742.8.0.2NotificationsystemResetcurrentThe system was reset. The conditions under which this trap is sent include, but are not limited to, the following. using the GUI - Maintenance->Reset Unit usin…
1.3.6.1.4.1.13742.8.0.3NotificationuserLogincurrentA user logged in.
1.3.6.1.4.1.13742.8.0.4NotificationuserLogoutcurrentA user logged out.
1.3.6.1.4.1.13742.8.0.5NotificationuserAuthenticationFailurecurrentA user authentication attempt failed.
1.3.6.1.4.1.13742.8.0.6NotificationuserSessionTimeoutcurrentA user timed out from the device.
1.3.6.1.4.1.13742.8.0.7NotificationuserAddedcurrentA user was added to the system.
1.3.6.1.4.1.13742.8.0.8NotificationuserModifiedcurrentA user account was modified.
1.3.6.1.4.1.13742.8.0.9NotificationuserDeletedcurrentA user was deleted from the system.
1.3.6.1.4.1.13742.8.0.10NotificationroleAddedcurrentA role was added to the system.
1.3.6.1.4.1.13742.8.0.11NotificationroleModifiedcurrentA role was modified.
1.3.6.1.4.1.13742.8.0.12NotificationroleDeletedcurrentA role was deleted from the system.
1.3.6.1.4.1.13742.8.0.13NotificationdeviceUpdateStartedcurrentThe device update has started.
1.3.6.1.4.1.13742.8.0.14NotificationdeviceUpdateCompletedcurrentThe device update has completed.
1.3.6.1.4.1.13742.8.0.15NotificationuserBlockedcurrentA blocked user tried to log in.
1.3.6.1.4.1.13742.8.0.16NotificationuserPasswordChangedcurrentUser password was changed.
1.3.6.1.4.1.13742.8.0.17NotificationpasswordSettingsChangedcurrentStrong password settings changed.
1.3.6.1.4.1.13742.8.0.18NotificationfirmwareValidationFailedcurrentFirmware validation failed.
1.3.6.1.4.1.13742.8.0.19NotificationlogFileClearedcurrentThe log file has been cleared.
1.3.6.1.4.1.13742.8.0.20NotificationbulkConfigurationSavedcurrentBulk Configuration saved.
1.3.6.1.4.1.13742.8.0.21NotificationbulkConfigurationCopiedcurrentBulk Configuration saved.
1.3.6.1.4.1.13742.8.0.22NotificationexternalSensorStateChangecurrentExternal Sensor State Change.
1.3.6.1.4.1.13742.8.0.23NotificationsmtpMessageTransmissionFailurecurrentSMTP message transmission failure
1.3.6.1.4.1.13742.8.0.24NotificationldapErrorcurrentLDAP Error occurred; errorDescription describes the error
1.3.6.1.4.1.13742.8.0.25NotificationdeviceUpdateFailedcurrentThe device update has failed.
1.3.6.1.4.1.13742.8.0.26NotificationpingServerEnabledcurrentThe ping feature has been enabled
1.3.6.1.4.1.13742.8.0.27NotificationpingServerDisabledcurrentThe ping feature has been disabled
1.3.6.1.4.1.13742.8.0.28NotificationserverNotReachablecurrentThe server is not reachable
1.3.6.1.4.1.13742.8.0.29NotificationserverReachablecurrentThe server is reachable
1.3.6.1.4.1.13742.8.0.30NotificationdeviceIdentificationChangedcurrentDevice identification has changed
1.3.6.1.4.1.13742.8.0.31NotificationusbSlaveConnectedcurrentUSB Connectivity to slave has been established
1.3.6.1.4.1.13742.8.0.32NotificationusbSlaveDisconnectedcurrentUSB Connectivity to slave has been lost
1.3.6.1.4.1.13742.8.0.33NotificationlhxSupportChangedcurrentThe Schroff LHX Support changed to state 'lhxSupportEnabled'.
1.3.6.1.4.1.13742.8.0.34NotificationuserAcceptedRestrictedServiceAgreementcurrentThe user accepted the Restricted Service Agreement.
1.3.6.1.4.1.13742.8.0.35NotificationuserDeclinedRestrictedServiceAgreementcurrentThe user declined the Restricted Service Agreement.
1.3.6.1.4.1.13742.8.0.36NotificationdeviceSettingsSavedcurrentDevice Settings have been saved.
1.3.6.1.4.1.13742.8.0.37NotificationdeviceSettingsRestoredcurrentDevice Settings have been restored.
1.3.6.1.4.1.13742.8.0.38NotificationwebcamInsertedcurrentA webcam has been inserted
1.3.6.1.4.1.13742.8.0.39NotificationwebcamRemovedcurrentA webcam has been removed
1.3.6.1.4.1.13742.8.0.40NotificationserverConnectivityUnrecoverablecurrentThe connection to the server could not be recovered
1.3.6.1.4.1.13742.8.0.41NotificationradiusErrorcurrentLDAP Error occurred; errorDescription describes the error
1.3.6.1.4.1.13742.8.0.42NotificationserverReachabilityErrorcurrentServer Reachability Error occurred; errorDescription describes the error. This trap is sent when the Error state is entered. Reasons for transitioning to the E…
1.3.6.1.4.1.13742.8.0.43NotificationunknownPeripheralDeviceAttachedcurrentAn unknown peripheral device was attached.
1.3.6.1.4.1.13742.8.0.44NotificationperipheralDeviceFirmwareUpdatecurrentThe firmware update state of a peripheral device changed while performing update to peripheralDevicePackageFirmwareVersion.
1.3.6.1.4.1.13742.8.0.45NotificationsmsMessageTransmissionFailurecurrentSending an SMS message failed.
1.3.6.1.4.1.13742.8.1Nodeconfiguration
1.3.6.1.4.1.13742.8.1.1Nodeunit
1.3.6.1.4.1.13742.8.1.1.1NodeunitConfiguration
1.3.6.1.4.1.13742.8.1.1.1.1ScalardeviceNameread-writecurrentThe user-defined name for the EMD.
1.3.6.1.4.1.13742.8.1.1.1.2ScalarhardwareVersionread-onlycurrentThe main boards hardware version.
1.3.6.1.4.1.13742.8.1.1.1.3ScalarfirmwareVersionread-onlycurrentThe firmware version.
1.3.6.1.4.1.13742.8.1.1.1.4ScalarutcOffsetread-onlycurrentThe current UTC offset.
1.3.6.1.4.1.13742.8.1.1.1.5ScalarexternalSensorCountread-onlycurrentThe number of external sensors.
1.3.6.1.4.1.13742.8.1.1.1.6ScalarmanagedExternalSensorCountread-onlycurrentThe number of managed external sensors
1.3.6.1.4.1.13742.8.1.1.1.7ScalarexternalSensorsZCoordinateUnitsread-writecurrentExternal Sensor Z Coordinate units: Freeform Text or Rack Units (U). Default is U.
1.3.6.1.4.1.13742.8.1.1.1.8ScalardeviceMACAddressread-onlycurrentThe current MAC address.
1.3.6.1.4.1.13742.8.1.1.1.9ScalardeviceInetAddressTyperead-onlycurrentThe type of address format
1.3.6.1.4.1.13742.8.1.1.1.10ScalardeviceInetIPAddressread-onlycurrentThe current IP address. A value of 0.0.0.0 indicates an error or an unset option.
1.3.6.1.4.1.13742.8.1.1.1.11ScalardeviceInetNetmaskread-onlycurrentThe current netmask. A value of 0.0.0.0 indicates an error or an unset option.
1.3.6.1.4.1.13742.8.1.1.1.12ScalardeviceInetGatewayread-onlycurrentThe current gateway. A value of 0.0.0.0 indicates an error or an unset option.
1.3.6.1.4.1.13742.8.1.1.1.13ScalarserverCountread-onlycurrentThe number of entries in serverReachabilityTable
1.3.6.1.4.1.13742.8.1.1.1.14Scalarmodelread-onlycurrentThe EMD device model.
1.3.6.1.4.1.13742.8.1.1.1.15ScalarcascadedDeviceConnectedread-onlycurrentIndicates whether a device is connected using an USB cable to the USB-A port of this EMX in a cascaded configuration. true: Connected false: Not Connected
1.3.6.1.4.1.13742.8.1.1.1.16ScalarperipheralDevicesAutoManagementread-writecurrentSet enabled state of auto management for new peripheral devices.
1.3.6.1.4.1.13742.8.1.1.1.17ScalarsynchronizeWithNTPServerread-writecurrentSet enabled state of the device's NTP client.
1.3.6.1.4.1.13742.8.1.1.1.18ScalaruseDHCPProvidedNTPServerread-writecurrentEnable usage of the DHCP/BOOTP provided NTP server addresses; the value is used only if synchronizeWithNTPServer is enabled.
1.3.6.1.4.1.13742.8.1.1.1.19ScalarfirstNTPServerAddressTyperead-writecurrentRepresents the type of firstNTPServerAddress.
1.3.6.1.4.1.13742.8.1.1.1.20ScalarfirstNTPServerAddressread-writecurrentThe address of the primary NTP server.
1.3.6.1.4.1.13742.8.1.1.1.21ScalarsecondNTPServerAddressTyperead-writecurrentRepresents the type of secondNTPServerAddress.
1.3.6.1.4.1.13742.8.1.1.1.22ScalarsecondNTPServerAddressread-writecurrentThe address of the secondary NTP server.
1.3.6.1.4.1.13742.8.1.1.2NodelogConfiguration
1.3.6.1.4.1.13742.8.1.1.2.1ScalardataLoggingread-writecurrentData Retrieval: enabled/disabled.
1.3.6.1.4.1.13742.8.1.1.2.2ScalarmeasurementPeriodread-onlycurrentData Collection periodicity. This is the periodicity of the data collected by the PX. This value is fixed at 1 second.
1.3.6.1.4.1.13742.8.1.1.2.3ScalarmeasurementsPerLogEntryread-writecurrentThe number of measurements used for each entry in the log.
1.3.6.1.4.1.13742.8.1.1.2.4ScalarlogSizeread-onlycurrentThe number of entries in the log.
1.3.6.1.4.1.13742.8.1.1.2.5ScalardataLoggingEnableForAllSensorsread-writecurrentOperation to control data logging for all sensors. If this OID is set to true, then all xxxSensorLogAvailable are set to true If this OID is set to false, then…
1.3.6.1.4.1.13742.8.1.2NodeexternalSensors
1.3.6.1.4.1.13742.8.1.2.1TableexternalSensorConfigurationTablenot-accessiblecurrentA list of externalSensor configuration entries. The number of entries is given by the value of externalSensorCount for the EMD.
1.3.6.1.4.1.13742.8.1.2.1.1RowexternalSensorConfigurationEntrynot-accessiblecurrentAn entry containing parameters for an external sensor.
1.3.6.1.4.1.13742.8.1.2.1.1.1ColumnsensorIDnot-accessiblecurrentA unique value for each sensor. Its value ranges between 1 and the value of externalSensorCount.
1.3.6.1.4.1.13742.8.1.2.1.1.2ColumnexternalSensorTyperead-onlycurrentThe type of sensor.
1.3.6.1.4.1.13742.8.1.2.1.1.3ColumnexternalSensorSerialNumberread-onlycurrentThe sensor serial number.
1.3.6.1.4.1.13742.8.1.2.1.1.4ColumnexternalSensorNameread-writecurrentThe user-defined name.
1.3.6.1.4.1.13742.8.1.2.1.1.5ColumnexternalSensorDescriptionread-writecurrentThe user-defined description.
1.3.6.1.4.1.13742.8.1.2.1.1.6ColumnexternalSensorXCoordinateread-writecurrentThe X coordinate.
1.3.6.1.4.1.13742.8.1.2.1.1.7ColumnexternalSensorYCoordinateread-writecurrentThe Y coordinate.
1.3.6.1.4.1.13742.8.1.2.1.1.8ColumnexternalSensorZCoordinateread-writecurrentThe Z coordinate.
1.3.6.1.4.1.13742.8.1.2.1.1.9ColumnexternalSensorChannelNumberread-onlycurrentThe channel number, applies only to contact sensors; -1 for other sensors
1.3.6.1.4.1.13742.8.1.2.1.1.10ColumnexternalOnOffSensorSubtyperead-writecurrentType of measurement in case sensor type is discrete OnOff
1.3.6.1.4.1.13742.8.1.2.1.1.11ColumnexternalSensorUnitsread-onlycurrentThe base units. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.
1.3.6.1.4.1.13742.8.1.2.1.1.12ColumnexternalSensorDecimalDigitsread-onlycurrentThe number of digits displayed to the right of the decimal point This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensor…
1.3.6.1.4.1.13742.8.1.2.1.1.13ColumnexternalSensorAccuracyread-onlycurrentThe accuracy: how close (in percent) the measurement is to the actual value. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDete…
1.3.6.1.4.1.13742.8.1.2.1.1.14ColumnexternalSensorResolutionread-onlycurrentThe resolution: the minimum difference between any two measured values. The value of this OID variable should be scaled by externalSensorDecimalDigits. For exa…
1.3.6.1.4.1.13742.8.1.2.1.1.15ColumnexternalSensorToleranceread-onlycurrentThe resolution: the difference between a sensor value and the actual value. The value of this OID variable should be scaled by (externalSensorDecimalDigits + 1…
1.3.6.1.4.1.13742.8.1.2.1.1.16ColumnexternalSensorMaximumread-onlycurrentThe largest possible value The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDec…
1.3.6.1.4.1.13742.8.1.2.1.1.17ColumnexternalSensorMinimumread-onlycurrentThe smallest possible value The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDe…
1.3.6.1.4.1.13742.8.1.2.1.1.18ColumnexternalSensorHysteresisread-writecurrentThe hysteresis used for deassertions The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externa…
1.3.6.1.4.1.13742.8.1.2.1.1.19ColumnexternalSensorStateChangeDelayread-writecurrentThe delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n,…
1.3.6.1.4.1.13742.8.1.2.1.1.20ColumnexternalSensorLowerCriticalThresholdread-writecurrentThe lower critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorD…
1.3.6.1.4.1.13742.8.1.2.1.1.21ColumnexternalSensorLowerWarningThresholdread-writecurrentThe lower non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and e…
1.3.6.1.4.1.13742.8.1.2.1.1.22ColumnexternalSensorUpperCriticalThresholdread-writecurrentThe upper critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorD…
1.3.6.1.4.1.13742.8.1.2.1.1.23ColumnexternalSensorUpperWarningThresholdread-writecurrentThe upper non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and e…
1.3.6.1.4.1.13742.8.1.2.1.1.24ColumnexternalSensorEnabledThresholdsread-writecurrentA bit string which indicates which thresholds are enabled. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors
1.3.6.1.4.1.13742.8.1.2.1.1.25ColumnexternalSensorPortread-onlycurrentThe position of the sensor. The format is a semicolon separated list of Keyword:value pairs - Keyword1:Value1;Keyword2:value2;... Keyword can be one of the fol…
1.3.6.1.4.1.13742.8.1.2.1.1.26ColumnexternalSensorIsActuatorread-onlycurrentIs this an actuator? True: It is an actuator False: It is not an actuator
1.3.6.1.4.1.13742.8.1.2.1.1.27ColumnexternalSensorAlarmedToNormalDelayread-writecurrentThe delay in seconds for transitions from the alarmed state to the normal state. If the sensor type is motionDetection, then it can set to a value greater >= 0…
1.3.6.1.4.1.13742.8.1.2.1.1.28ColumnexternalSensorUseDefaultThresholdsread-writecurrentUse default thresholds for this sensor? True: Use default thresholds for this sensor False: Do not use default thresholds for this sensor
1.3.6.1.4.1.13742.8.1.2.4TableexternalSensorTypeDefaultThresholdsTablenot-accessiblecurrentA list of entries listing the default thresholds for each sensor type.
1.3.6.1.4.1.13742.8.1.2.4.1RowexternalSensorTypeDefaultThresholdsEntrynot-accessiblecurrentAn entry containing default thresholds for a sensor type.
1.3.6.1.4.1.13742.8.1.2.4.1.3ColumnexternalSensorTypeDefaultHysteresisread-writecurrentThe hysteresis used for deassertions The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externa…
1.3.6.1.4.1.13742.8.1.2.4.1.4ColumnexternalSensorTypeDefaultStateChangeDelayread-writecurrentThe delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n,…
1.3.6.1.4.1.13742.8.1.2.4.1.5ColumnexternalSensorTypeDefaultLowerCriticalThresholdread-writecurrentThe lower critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorD…
1.3.6.1.4.1.13742.8.1.2.4.1.6ColumnexternalSensorTypeDefaultLowerWarningThresholdread-writecurrentThe lower non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and e…
1.3.6.1.4.1.13742.8.1.2.4.1.7ColumnexternalSensorTypeDefaultUpperCriticalThresholdread-writecurrentThe upper critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorD…
1.3.6.1.4.1.13742.8.1.2.4.1.8ColumnexternalSensorTypeDefaultUpperWarningThresholdread-writecurrentThe upper non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and e…
1.3.6.1.4.1.13742.8.1.2.4.1.9ColumnexternalSensorTypeDefaultEnabledThresholdsread-writecurrentA bit string which indicates which thresholds are enabled. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors
1.3.6.1.4.1.13742.8.1.2.5TableperipheralDevicePackageTablenot-accessiblecurrentA list of entries for the peripheral Device Packages connected to an EMX. The number of entries is given by the value of peripheralDevicePackagesCount.
1.3.6.1.4.1.13742.8.1.2.5.1RowperipheralDevicePackageEntrynot-accessiblecurrentAn entry containing objects for a controller.
1.3.6.1.4.1.13742.8.1.2.5.1.1ColumnperipheralDevicePackageIdnot-accessiblecurrentA unique value for each peripheral device package.
1.3.6.1.4.1.13742.8.1.2.5.1.3ColumnperipheralDevicePackageSerialNumberread-onlycurrentThe peripheral device package serial number.
1.3.6.1.4.1.13742.8.1.2.5.1.4ColumnperipheralDevicePackageModelread-onlycurrentThe peripheral device package model. Examples are DX-D2C6, DPX2-T1, DPX2-T1H1, DPX2-T2H1, DPX2-T3H1
1.3.6.1.4.1.13742.8.1.2.5.1.5ColumnperipheralDevicePackageFirmwareVersionread-onlycurrentThe peripheral device package firmware version.
1.3.6.1.4.1.13742.8.1.2.5.1.6ColumnperipheralDevicePackageMinFirmwareVersionread-onlycurrentThe peripheral device package minimum firmware version. This field may be empty. If it is not empty, then it shall not be possible to downgrade the peripheral …
1.3.6.1.4.1.13742.8.1.2.5.1.7ColumnperipheralDevicePackageFirmwareTimeStampread-onlycurrentThe time when the peripheralDevicePackage firmware was updated in UNIX(epoch)time. It is measured in seconds relative to January 1, 1970 (midnight UTC/GMT), i.…
1.3.6.1.4.1.13742.8.1.2.5.1.8ColumnperipheralDevicePackagePositionread-onlycurrentThe position of the package. The format is a semicolon separated list of Keyword:value pairs - Keyword1:Value1;Keyword2:value2;... Keyword can be one of the fo…
1.3.6.1.4.1.13742.8.1.2.5.1.9ColumnperipheralDevicePackageStateread-onlycurrentThe state of the package.
1.3.6.1.4.1.13742.8.1.3NodeserverReachability
1.3.6.1.4.1.13742.8.1.3.1TableserverReachabilityTablenot-accessiblecurrentA list of server entries. The number of entries is given by the value of serverCount for the EMD.
1.3.6.1.4.1.13742.8.1.3.1.1RowserverReachabilityEntrynot-accessiblecurrentAn entry containing parameters for a server.
1.3.6.1.4.1.13742.8.1.3.1.1.1ColumnserverIDnot-accessiblecurrentA unique value for each server. Its value ranges between 1 and the value of serverCount for that EMD
1.3.6.1.4.1.13742.8.1.3.1.1.2ColumnserverIPAddressread-onlycurrentThe IP Address/host name of the server
1.3.6.1.4.1.13742.8.1.3.1.1.3ColumnserverPingEnabledread-writecurrentIs ping enabled for this server?
1.3.6.1.4.1.13742.8.2Nodemeasurements
1.3.6.1.4.1.13742.8.2.1NodemeasurementsExternalSensor
1.3.6.1.4.1.13742.8.2.1.1TableexternalSensorMeasurementsTablenot-accessiblecurrentA list of external sensor entries. The number of entries is given by the value of externalSensorCount for the EMD.
1.3.6.1.4.1.13742.8.2.1.1.1RowexternalSensorMeasurementsEntrynot-accessiblecurrentAn entry containing measurement objects for an external sensor.
1.3.6.1.4.1.13742.8.2.1.1.1.1ColumnmeasurementsExternalSensorIsAvailableread-onlycurrentIs the sensor available?
1.3.6.1.4.1.13742.8.2.1.1.1.2ColumnmeasurementsExternalSensorStateread-onlycurrentThe sensor state.
1.3.6.1.4.1.13742.8.2.1.1.1.3ColumnmeasurementsExternalSensorValueread-onlycurrentThe sensor reading. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.
1.3.6.1.4.1.13742.8.2.1.1.1.4ColumnmeasurementsExternalSensorTimeStampread-onlycurrentThe sensor reading timestamp.
1.3.6.1.4.1.13742.8.3Nodeconformance
1.3.6.1.4.1.13742.8.3.1Nodecompliances
1.3.6.1.4.1.13742.8.3.1.1CompliancecomplianceRev1currentThe requirements for conformance to the EMD-MIB.
1.3.6.1.4.1.13742.8.3.2Nodegroups
1.3.6.1.4.1.13742.8.3.2.1GroupconfigGroupcurrentA collection of objects representing configuration data.
1.3.6.1.4.1.13742.8.3.2.2GroupmeasurementsGroupcurrentA collection of objects providing the measurement capability of EMD.
1.3.6.1.4.1.13742.8.3.2.3GrouptrapInformationGroupcurrentA collection of objects providing information in the traps.
1.3.6.1.4.1.13742.8.3.2.4GrouptrapsGroupcurrentA collection of traps.
1.3.6.1.4.1.13742.8.3.2.5GrouplogGroupcurrentA collection of objects providing the logging capabilities about the EMD.
1.3.6.1.4.1.13742.8.3.2.6GroupcontrolGroupcurrentA collection of objects providing the ability to control actuators of the EMD.
1.3.6.1.4.1.13742.8.4Nodelog
1.3.6.1.4.1.13742.8.4.1NodelogUnit
1.3.6.1.4.1.13742.8.4.1.1ScalaroldestLogIDread-onlycurrentThe index of the oldest data in the buffer for this EMD.
1.3.6.1.4.1.13742.8.4.1.2ScalarnewestLogIDread-onlycurrentThe index of the newest data in the buffer for this EMD.
1.3.6.1.4.1.13742.8.4.1.3TablelogTimeStampTablenot-accessiblecurrentA list of entries containing the timestamps of the entries in the log.
1.3.6.1.4.1.13742.8.4.1.3.1RowlogTimeStampEntrynot-accessiblecurrentAn entry containing the timestamp for log entries.
1.3.6.1.4.1.13742.8.4.1.3.1.1ColumnlogIndexnot-accessiblecurrentA unique value for each entry in the log. Its value ranges between 1 and the value of logSize.
1.3.6.1.4.1.13742.8.4.1.3.1.2ColumnlogTimeStampread-onlycurrentThe time when the data was collected. It is measured in seconds relative to January 1, 1970 (midnight UTC/GMT), i.e a value of 0 indicates January 1, 1970 (mid…
1.3.6.1.4.1.13742.8.4.2NodelogExternalSensor
1.3.6.1.4.1.13742.8.4.2.1TableexternalSensorLogTablenot-accessiblecurrentA list of external sensor entries. The number of entries is given by the value of externalSensorCount for the EMD.
1.3.6.1.4.1.13742.8.4.2.1.1RowexternalSensorLogEntrynot-accessiblecurrentAn entry containing log objects for an external sensor.
1.3.6.1.4.1.13742.8.4.2.1.1.2ColumnlogExternalSensorDataAvailableread-onlycurrentIs data available for this sensor during this measurement period?
1.3.6.1.4.1.13742.8.4.2.1.1.3ColumnlogExternalSensorStateread-onlycurrentThe sensor state.
1.3.6.1.4.1.13742.8.4.2.1.1.4ColumnlogExternalSensorAvgValueread-onlycurrentThe sensor reading average value.
1.3.6.1.4.1.13742.8.4.2.1.1.5ColumnlogExternalSensorMaxValueread-onlycurrentThe sensor reading maximum value.
1.3.6.1.4.1.13742.8.4.2.1.1.6ColumnlogExternalSensorMinValueread-onlycurrentThe sensor reading minimum value.
1.3.6.1.4.1.13742.8.5Nodecontrol
1.3.6.1.4.1.13742.8.5.1NodeactuatorControl
1.3.6.1.4.1.13742.8.5.1.1TableactuatorControlTablenot-accessiblecurrentA list of actuators for an EMX.
1.3.6.1.4.1.13742.8.5.1.1.1RowactuatorControlEntrynot-accessiblecurrentAn entry for implementing user-initiated state changes for an actuator.
1.3.6.1.4.1.13742.8.5.1.1.1.1ColumnactuatorStateread-writecurrentThe actuator state. A Get operation retrieves the state of the actuator. A Set operation changes the stae of the sensor. The valid states for set operations ar…
Type Definitions
NameSyntaxStatusDescription
DeviceIdentificationParameterEnumerationINTEGER { deviceName(0), sysContact(1), sysName(2), sysLocation(3) }currentThe configurable parameters.
ExternalSensorsZCoordinateUnitsEnumerationINTEGER { rackUnits(0), text(1) }currentThe units of the external Sensor Z Coordinate. rackUnits implies that the Z Coordinate for all external sensors is in rack Units (U) text implies that the Z Coordinate for all external sensors is a text string (label)
HundredthsOfAPercentageUnsigned32 (0..10000)currentData type for reporting values in hundredths of percentage, i.e. 0.01 %.
PeripheralDeviceFirmwareUpdateStateEnumerationINTEGER { started(1), successful(2), failed(3) }currentThe state of an peripheral device firmware update.
SensorStateEnumerationINTEGER { unavailable(-1), open(0), closed(1), belowLowerCritical(2), belowLowerWarning(3), normal(4), aboveUpperWarning(5), aboveUpperCritical(6), on(7), off(8), detected(9), notDetected(10), alarmed(11) }currentThe states a sensor can be in.
SensorTypeEnumerationINTEGER { rmsCurrent(1), peakCurrent(2), unbalancedCurrent(3), rmsVoltage(4), activePower(5), apparentPower(6), powerFactor(7), activeEnergy(8), apparentEnergy(9), temperature(10), humidity(11), airFlow(12), airPressure(13), onOff(14), trip(15), vibration(16), waterDetection(17), smokeDetection(18), binary(19), contact(20), fanSpeed(21), absoluteHumidity(28), other(30), none(31), illuminance(42), doorContact(43), tamperDetection(44), motionDetection(45) }currentThe types a sensor can be.
SensorUnitsEnumerationINTEGER { none(-1), other(0), volt(1), amp(2), watt(3), voltamp(4), wattHour(5), voltampHour(6), degreeC(7), hertz(8), percent(9), meterpersec(10), pascal(11), psi(12), g(13), degreeF(14), feet(15), inches(16), cm(17), meters(18), rpm(19), degrees(20), lux(21), grampercubicmeter(22), voltampReactive(23) }currentThe types a sensor can be.
MIB Viewer