ENGENIUS-PRIVATE-MIB
145 objects
The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14125 | Nodeengenius | |||
| 1.3.6.1.4.1.14125.2 | Identityengeniusprivate | The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.… | ||
| 1.3.6.1.4.1.14125.2.1 | Nodestatus | |||
| 1.3.6.1.4.1.14125.2.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.14125.2.1.1.1 | ScalarsystemName | read-only | current | The DUT's system name. |
| 1.3.6.1.4.1.14125.2.1.1.2 | ScalarsysPassword | read-only | current | The password that system manager own. |
| 1.3.6.1.4.1.14125.2.1.1.3 | ScalarerrMsg | read-only | current | The error message record |
| 1.3.6.1.4.1.14125.2.1.1.4 | ScalarstatusWLANSTAAssoc | read-only | current | The status of wireless interface connect to AP |
| 1.3.6.1.4.1.14125.2.1.1.5 | ScalarmodelName | read-only | current | Firmware model name |
| 1.3.6.1.4.1.14125.2.1.1.6 | ScalarwirelessMacAddress | read-only | current | The wireless MAC address |
| 1.3.6.1.4.1.14125.2.1.1.7 | ScalarwanIPAddress | read-only | current | The WAN IP address |
| 1.3.6.1.4.1.14125.2.1.1.8 | ScalarwanSubnetMask | read-only | current | The WAN subnet mask |
| 1.3.6.1.4.1.14125.2.2 | Nodeconfiguration | |||
| 1.3.6.1.4.1.14125.2.2.1 | Nodewan | |||
| 1.3.6.1.4.1.14125.2.2.1.1 | ScalarwanConnectionType | read-write | current | The wan connection type which one of Static IP/DHCP/PPPoE/PPTP |
| 1.3.6.1.4.1.14125.2.2.1.2 | ScalarwanGeneralAccount | read-write | current | The DUT network Account ID |
| 1.3.6.1.4.1.14125.2.2.1.3 | ScalarwanGeneralDomain | read-write | current | The DUT network Domain Name |
| 1.3.6.1.4.1.14125.2.2.1.4 | ScalarwanGeneralIP | read-write | current | The DUT wan interface static IP address in static connection type |
| 1.3.6.1.4.1.14125.2.2.1.5 | ScalarwanGeneralSubnetMask | read-write | current | The DUT wan interface subnet mask in static connection type |
| 1.3.6.1.4.1.14125.2.2.1.6 | ScalarwanGeneralGateway | read-write | current | The DUT networks gateway IP address in static connection type |
| 1.3.6.1.4.1.14125.2.2.2 | Nodepppoe | |||
| 1.3.6.1.4.1.14125.2.2.2.1 | ScalarwanPPPoELoginName | read-write | current | PPPoE user name |
| 1.3.6.1.4.1.14125.2.2.2.2 | ScalarwanPPPoEPassword | read-write | current | PPPoE password |
| 1.3.6.1.4.1.14125.2.2.2.3 | ScalarwanPPPoEServiceName | read-write | current | Specifies the desired PPPoE service name |
| 1.3.6.1.4.1.14125.2.2.2.4 | ScalarwanPPPoEConnectionType | read-write | current | PPPoE connection type which keep alive or on demand. |
| 1.3.6.1.4.1.14125.2.2.2.5 | ScalarwanPPPoEMaxIdleTime | read-write | current | The max idle time (minutes) in connect on demand connection type |
| 1.3.6.1.4.1.14125.2.2.2.6 | ScalarwanPPPoERedialPeriod | read-write | current | The redial period (seconds) in keep alive connection type |
| 1.3.6.1.4.1.14125.2.2.3 | Nodedns | |||
| 1.3.6.1.4.1.14125.2.2.3.1 | ScalarwanDNSSourc | read-write | current | Automatically gets DNS IP address from ISP or user sepcisicify |
| 1.3.6.1.4.1.14125.2.2.3.2 | ScalarwanPrimaryDNSIP | read-write | current | The primary DNS IP address |
| 1.3.6.1.4.1.14125.2.2.3.3 | ScalarwanSecondaryDNSIP | read-write | current | The secondary DNS IP address |
| 1.3.6.1.4.1.14125.2.2.4 | Nodemtu | |||
| 1.3.6.1.4.1.14125.2.2.4.1 | ScalarwanMTUMode | read-write | current | Automatically setting MTU value or user sepcisicify |
| 1.3.6.1.4.1.14125.2.2.4.2 | ScalarwanMTU | read-write | current | The Maximum Transmission Unit (MTU) in WAN interface |
| 1.3.6.1.4.1.14125.2.2.4.3 | ScalarpppoeMTU | read-write | current | The Maximum Transmission Unit (MTU) in PPPoE protocol |
| 1.3.6.1.4.1.14125.2.2.5 | Nodelandhcp | |||
| 1.3.6.1.4.1.14125.2.2.5.1 | ScalarlanDHCPC | read-write | current | Automatically get LAN IP address form DHCP server or set static IP address |
| 1.3.6.1.4.1.14125.2.2.5.2 | ScalarlanIP | read-write | current | To setting static LAN IP address in DUT |
| 1.3.6.1.4.1.14125.2.2.5.3 | ScalarlanSubnetmask | read-write | current | To setting static Subnet Mask in DUT |
| 1.3.6.1.4.1.14125.2.2.5.4 | ScalarlanGatewayIP | read-write | current | To setting getway IP address in DUT |
| 1.3.6.1.4.1.14125.2.2.5.5 | ScalarlanWINSAddr | read-write | current | To setting WINS IP address in DUT |
| 1.3.6.1.4.1.14125.2.2.5.6 | ScalarlanDHCPSrvEnable | read-write | current | Enable / Disable DHCP server |
| 1.3.6.1.4.1.14125.2.2.5.7 | ScalarlanDHCPSrvStartAddr | read-write | current | To setting DHCP server allocate IP address up bound |
| 1.3.6.1.4.1.14125.2.2.5.8 | ScalarlanDHCPSrvStopAddr | read-write | current | To setting DHCP server allocate IP address low bound |
| 1.3.6.1.4.1.14125.2.2.6 | Nodentp | |||
| 1.3.6.1.4.1.14125.2.2.6.1 | ScalartimeSettingMode | read-write | current | Automatically get or manually set Date and Time |
| 1.3.6.1.4.1.14125.2.2.6.2 | ScalaruserNTPSrvMode | read-write | current | Enable / Disable user sepcisicify NTP server |
| 1.3.6.1.4.1.14125.2.2.6.3 | ScalaruserNTPSrvIP | read-write | current | User sepcisicify NTP server IP address |
| 1.3.6.1.4.1.14125.2.2.6.4 | ScalartimeZone | read-only | current | To setting time zone in DUT |
| 1.3.6.1.4.1.14125.2.2.8 | Nodeadmin | |||
| 1.3.6.1.4.1.14125.2.2.8.1 | Scalarusername | read-write | current | The User Name that system manager own |
| 1.3.6.1.4.1.14125.2.2.8.3 | ScalarremoteManagementEnable | read-write | current | Enable / Disable remote management DUT function |
| 1.3.6.1.4.1.14125.2.2.8.4 | ScalarremoteUpgradeEnable | read-write | current | Enable / Disable remote upgrade firmware |
| 1.3.6.1.4.1.14125.2.2.8.5 | ScalarremoteManagementPort | read-write | current | To setting remote management port |
| 1.3.6.1.4.1.14125.2.2.8.6 | ScalarremoteManagementVLANID | read-write | current | To setting management Tag on VLAN |
| 1.3.6.1.4.1.14125.2.2.9 | Nodewlan | |||
| 1.3.6.1.4.1.14125.2.2.9.1 | ScalarwlanMode | read-write | current | The wireless lan operation mode. (802.11a/b/g) |
| 1.3.6.1.4.1.14125.2.2.9.2 | ScalarchanBwMode | read-write | current | The WLAN narrow band |
| 1.3.6.1.4.1.14125.2.2.9.3 | ScalarwlanaSSID | read-write | current | The SSID which station connect to |
| 1.3.6.1.4.1.14125.2.2.9.4 | ScalarwlanOpMode | read-write | current | The WLAN operation mode. (Access Point/ Client Bridge/ WDS Bridge/ Repeater/ AP Router / Client Router) |
| 1.3.6.1.4.1.14125.2.2.9.5 | ScalarwlanCountryCode | read-only | current | The country code |
| 1.3.6.1.4.1.14125.2.2.9.6 | ScalarwlanCountry | read-only | current | The string of the country name |
| 1.3.6.1.4.1.14125.2.2.9.7 | ScalarwlanChannel | read-write | current | The wireless channel frequency |
| 1.3.6.1.4.1.14125.2.2.9.8 | ScalarwlanACLMode | read-write | current | The WLAN Mac filter mode. (Disable / Deny / Allow) |
| 1.3.6.1.4.1.14125.2.2.9.9 | ScalarwlanOutdoorDistance | read-write | current | The distance between two DUTs |
| 1.3.6.1.4.1.14125.2.2.9.10 | ScalarwlanDataRate | read-write | current | The wireless LAN Data rate. The available input option: 1M, 2M, 5.5M, 6M, 9M, 11M, 12M, 18M, 24M, 36M, 48M, 54M, auto |
| 1.3.6.1.4.1.14125.2.2.9.11 | ScalarwlanTxPower | read-write | current | The WLAN transmission power |
| 1.3.6.1.4.1.14125.2.2.9.12 | Scalarantennasel | read-write | current | The antenna which prefer to use |
| 1.3.6.1.4.1.14125.2.2.9.13 | ScalarwlanBeaconInterval | read-write | current | The sent beacon interval time |
| 1.3.6.1.4.1.14125.2.2.9.15 | ScalarwlanRTSTh | read-write | current | The WLAN RTS/CTS threshold |
| 1.3.6.1.4.1.14125.2.2.9.16 | ScalarwlanFragLen | read-write | current | The WLAN packages fragment length |
| 1.3.6.1.4.1.14125.2.2.9.18 | ScalarwlanProtmode | read-write | current | Protection transmittion on G band. (CTS or RTS/CTS) |
| 1.3.6.1.4.1.14125.2.2.9.19 | ScalarwlanPreferBSSID | read-write | current | The MAC address of the prefer connection AP |
| 1.3.6.1.4.1.14125.2.2.9.21 | TablewlanTable | not-accessible | current | This table display the wlan table. |
| 1.3.6.1.4.1.14125.2.2.9.21.1 | RowwlanTableEntry | not-accessible | current | Represent the entry in the wlan table. |
| 1.3.6.1.4.1.14125.2.2.9.21.1.1 | ColumnwlanTableIndex | not-accessible | current | Specify the index of the wlan table. |
| 1.3.6.1.4.1.14125.2.2.9.21.1.2 | ColumnwlanEnable | read-write | current | Enable / Disable |
| 1.3.6.1.4.1.14125.2.2.9.21.1.3 | ColumnwlanSSID | read-write | current | The WLAN SSID |
| 1.3.6.1.4.1.14125.2.2.9.21.1.4 | ColumnwlanHideSSID | read-write | current | Enable / Disable broadcast SSID |
| 1.3.6.1.4.1.14125.2.2.9.21.1.5 | ColumnwlanStaSeparation | read-write | current | Enable / Disable STA separation |
| 1.3.6.1.4.1.14125.2.2.9.21.1.6 | ColumnwlanVLANID | read-write | current | The WLAN interface VLAN ID |
| 1.3.6.1.4.1.14125.2.2.9.21.1.7 | ColumnwlanAuth | read-write | current | The WLAN authentication type |
| 1.3.6.1.4.1.14125.2.2.9.21.1.8 | ColumnwlanEncryption | read-write | current | The WLAN encryption type |
| 1.3.6.1.4.1.14125.2.2.9.21.1.9 | ColumnwlanWepDefaultKeyIdx | read-write | current | The WLAN WEP Key index of combination |
| 1.3.6.1.4.1.14125.2.2.9.21.1.10 | ColumnwlanWepKey | read-write | current | The WLAN WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys |
| 1.3.6.1.4.1.14125.2.2.9.21.1.11 | ColumnwlanWpapskPassphrase | read-write | current | The WLAN WPA Key combination |
| 1.3.6.1.4.1.14125.2.2.9.21.1.12 | ColumnwlanWpaRadiusSrvIP | read-write | current | The WLAN WPA-Enterprise remote radius server IP |
| 1.3.6.1.4.1.14125.2.2.9.21.1.13 | ColumnwlanWpaRadiusSrvPort | read-write | current | The WLAN WPA-Enterprise remote radius server port |
| 1.3.6.1.4.1.14125.2.2.9.21.1.14 | ColumnwlanWpaRadiusSrvSecret | read-write | current | The WLAN WPA-Enterprise key combination |
| 1.3.6.1.4.1.14125.2.2.9.21.1.15 | ColumnwlanWpaGroupKeyUpdateInterval | read-write | current | The WLAN WPA-Enterprise group key update interval |
| 1.3.6.1.4.1.14125.2.2.10 | Nodewlansta | |||
| 1.3.6.1.4.1.14125.2.2.10.1 | ScalarwlanSTAAuth | read-write | current | The WLAN STA authentication type |
| 1.3.6.1.4.1.14125.2.2.10.2 | ScalarwlanSTAEncryption | read-write | current | The WLAN STA encryption type |
| 1.3.6.1.4.1.14125.2.2.10.3 | ScalarwlanSTAWepDefaultKeyIdx | read-write | current | The WLAN STA WEP Key index of combination |
| 1.3.6.1.4.1.14125.2.2.10.4 | ScalarwlanSTAWepKey | read-write | current | The WLAN STA WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys |
| 1.3.6.1.4.1.14125.2.2.10.5 | ScalarwlanSTAWpapskPassphrase | read-write | current | The WLAN STA WPA Key combination |
| 1.3.6.1.4.1.14125.2.2.11 | Nodewlanmesh | |||
| 1.3.6.1.4.1.14125.2.2.11.1 | ScalarwlanMESHSSID | read-write | current | The string of the WLAN SSID in MESH mode |
| 1.3.6.1.4.1.14125.2.2.11.2 | ScalarwlanMESHGateway | read-write | current | The Gateway IP address in MESH mode |
| 1.3.6.1.4.1.14125.2.2.11.4 | ScalarwlanMESHAuth | read-write | current | The authentication type in MESH mode |
| 1.3.6.1.4.1.14125.2.2.11.5 | ScalarwlanMESHEncryption | read-write | current | The encryption type in MESH mode |
| 1.3.6.1.4.1.14125.2.2.11.6 | ScalarwlanMESHWepDefaultKeyIdx | read-write | current | The WLAN WEP Key index of combination in MESH mode |
| 1.3.6.1.4.1.14125.2.2.11.7 | ScalarwlanMESHWepKey | read-write | current | The WLAN MESH WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys |
| 1.3.6.1.4.1.14125.2.2.11.8 | ScalarwlanMESHWpapskPassphrase | read-write | current | The WLAN WPA Key combination in MESH mode |
| 1.3.6.1.4.1.14125.2.2.14 | Nodewlanstawds | |||
| 1.3.6.1.4.1.14125.2.2.14.1 | ScalarstaWDS | read-write | current | Enable / Disable WDS link in Client Mode |
| 1.3.6.1.4.1.14125.2.2.15 | Nodestp | |||
| 1.3.6.1.4.1.14125.2.2.15.1 | ScalarstpMode | read-write | current | Enable / Disable Spanning Tree |
| 1.3.6.1.4.1.14125.2.2.15.2 | ScalarstpHelloTime | read-write | current | The interval between periodic transmissions of Configuration Messages by Designated Ports. IEEE802.1D 17.13.6 |
| 1.3.6.1.4.1.14125.2.2.15.3 | ScalarstpMaxAge | read-write | current | The maximum age of the information transmitted by the Bridge when it is the Root Bridge. IEEE 802.1D 17.13.8 |
| 1.3.6.1.4.1.14125.2.2.15.4 | ScalarstpForwardDelay | read-write | current | The delay used by STP Bridges to transition Reoot and Designated Ports to Forwarding. IEEE 802.1D 17.13.5 |
| 1.3.6.1.4.1.14125.2.2.15.5 | ScalarstpPriority | read-write | current | The manageable component of the Port Identifier. IEEE 802.1D 17.13.10 |
| 1.3.6.1.4.1.14125.2.2.16 | Nodesnmp | |||
| 1.3.6.1.4.1.14125.2.2.16.1 | ScalarsnmpEnable | read-write | current | Enable / Disable SNMP agent |
| 1.3.6.1.4.1.14125.2.2.16.2 | ScalarsnmpCmntyRO | read-write | current | The communication string for Read Only |
| 1.3.6.1.4.1.14125.2.2.16.3 | ScalarsnmpCmntyRW | read-write | current | The communication string for Read Write |
| 1.3.6.1.4.1.14125.2.2.16.4 | ScalarsnmpTrapDstIP | read-write | current | The IP address which snmp trap sent to |
| 1.3.6.1.4.1.14125.2.2.16.5 | ScalarsnmpTrapCmnty | read-write | current | The communication string for trap message |
| 1.3.6.1.4.1.14125.2.2.16.6 | ScalarsnmpCont | read-write | current | The snmp contact information |
| 1.3.6.1.4.1.14125.2.2.16.7 | ScalarsnmpLocation | read-write | current | The snmp location information |
| 1.3.6.1.4.1.14125.2.2.16.8 | ScalarsysObjectID | read-only | current | The SNMP company OID |
| 1.3.6.1.4.1.14125.2.2.17 | Nodewmm | |||
| 1.3.6.1.4.1.14125.2.2.17.1 | ScalarwmmEnable | read-write | current | Enable / Disable WMM setting |
| 1.3.6.1.4.1.14125.2.2.20 | Nodelogemail | |||
| 1.3.6.1.4.1.14125.2.2.20.1 | ScalarlogServerEnable | read-write | current | Enable / Disable remote log server which log sent to |
| 1.3.6.1.4.1.14125.2.2.20.2 | ScalarlogServerIP | read-write | current | Remote log server IP address |
| 1.3.6.1.4.1.14125.2.2.20.3 | ScalarlogLocalEnable | read-write | current | Enable / Disable local log server |
| 1.3.6.1.4.1.14125.2.2.20.4 | ScalarlogLevel | read-write | current | The level (all/ Debug/ Information/ Notice/ Warning/ Error/ Critical/ Alert/ Emergency) of log message |
| 1.3.6.1.4.1.14125.2.2.21 | Nodevpn | |||
| 1.3.6.1.4.1.14125.2.2.21.1 | ScalarvpnPassthroughPPTP | read-write | current | Enable / Disable PPTP packages pass through |
| 1.3.6.1.4.1.14125.2.2.21.2 | ScalarvpnPassthroughL2TP | read-write | current | Enable / Disable L2TP packages pass through |
| 1.3.6.1.4.1.14125.2.2.21.3 | ScalarvpnPassthroughIPSec | read-write | current | Enable / Disable IPSec packages pass through |
| 1.3.6.1.4.1.14125.2.2.22 | Nodetraffic | |||
| 1.3.6.1.4.1.14125.2.2.22.1 | ScalartcEnable | read-write | current | Enable Traffic Shapping |
| 1.3.6.1.4.1.14125.2.2.22.2 | ScalartcInRate | read-write | current | Incoming Traffic Limit, in kbits/s |
| 1.3.6.1.4.1.14125.2.2.22.3 | ScalartcInBurst | read-write | current | Incoming Traffic Burst, in kBytes |
| 1.3.6.1.4.1.14125.2.2.22.4 | ScalartcOutRate | read-write | current | Outgoing Traffic Limit, in kbits/s |
| 1.3.6.1.4.1.14125.2.2.22.5 | ScalartcOutBurst | read-write | current | Outgoing Traffic Burst, in kBytes |
| 1.3.6.1.4.1.14125.2.3 | Nodecommand | |||
| 1.3.6.1.4.1.14125.2.3.1 | NodesaveCmd | |||
| 1.3.6.1.4.1.14125.2.3.1.1 | ScalarexecuteSaveCmd | read-write | current | SnmpSet with value 1 to execute the cfg_save() command. |
| 1.3.6.1.4.1.14125.2.3.2 | NoderesetCmd | |||
| 1.3.6.1.4.1.14125.2.3.2.1 | ScalarexecuteResetCmd | read-write | current | SnmpSet with value 1 to execute the cfg_factory_default() command. |
| 1.3.6.1.4.1.14125.2.3.3 | NoderebootCmd | |||
| 1.3.6.1.4.1.14125.2.3.3.1 | ScalarexecuteRebootCmd | read-write | current | Define the timeout (1~300seconds) and execute the reboot command. |