ENTERASYS-ESWITCH-MIB
37 objects
The Enterasys Networks Proprietary MIB module for entities implementing the Extended Switch Objects.
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5624.1.2.10 | IdentityenterasysESwitchMIB | The Enterasys Networks Proprietary MIB module for entities implementing the Extended Switch Objects. | ||
| 1.3.6.1.4.1.5624.1.2.10.1 | NodeetsysESwitchObjects | |||
| 1.3.6.1.4.1.5624.1.2.10.1.1 | NodeetsysESwitchParams | |||
| 1.3.6.1.4.1.5624.1.2.10.1.1.1 | ScalaretsysESwitchAdminStatus | read-write | current | DURABLE: The meanings of the values are: enabled(1) - setting this object to enabled causes the device to begin it's power up sequence and attempt to enter its… |
| 1.3.6.1.4.1.5624.1.2.10.1.2 | NodeetsysESwitchRateLimiting | |||
| 1.3.6.1.4.1.5624.1.2.10.1.2.1 | TableetsysESwitchRateLimitingTable | not-accessible | current | This table allows rate limiting of multicast frames received on bridge ports. A typical application of this might be to limit a broadcast storm to the confines… |
| 1.3.6.1.4.1.5624.1.2.10.1.2.1.1 | RowetsysESwitchRateLimitingEntry | not-accessible | current | An Entry (conceptual row) in the RateLimiting Table. A collection of objects containing information for enabling and configuring RateLimiting. |
| 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.1 | ColumnetsysESwitchRateLimitSwitch | read-write | current | DURABLE: By default, rate limiting will be disabled. It can be enabled by setting this object to 'true(1)'. |
| 1.3.6.1.4.1.5624.1.2.10.1.2.1.1.2 | ColumnetsysESwitchRateLimit | read-write | current | DURABLE: This is the maximum number of rate-limited frames per second that the bridge will forward per second. |
| 1.3.6.1.4.1.5624.1.2.10.1.3 | NodeetsysESwitchFilter | |||
| 1.3.6.1.4.1.5624.1.2.10.1.3.1 | TableetsysESwitchAddrFilterTable | not-accessible | current | A list of interface entries. The number of entries is given by ifNumber, defined in MIB-II. |
| 1.3.6.1.4.1.5624.1.2.10.1.3.1.1 | RowetsysESwitchAddrFilterEntry | not-accessible | current | A collection of objects containing information for a given interface. |
| 1.3.6.1.4.1.5624.1.2.10.1.3.1.1.1 | ColumnetsysESwitchAddressFilter | read-write | current | DURABLE: A switch that controls address filtering. When true, the bridge purges the learned entries from its forwarding database, stops its learning process, a… |
| 1.3.6.1.4.1.5624.1.2.10.1.4 | NodeetsysESwitchProtocolObjects | |||
| 1.3.6.1.4.1.5624.1.2.10.1.4.1 | TableetsysESwitchEtherTypeTable | not-accessible | current | A table for defining the meaning of the 'userEtherType' rows in the etsysESwitchProtocolTable. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.1.1 | RowetsysESwitchEtherTypeEntry | not-accessible | current | Each row defines a particular EtherType that may be used as a basis for protocol filtering and VLAN classification. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.1.1.1 | ColumnetsysESwitchEtherTypeIndex | not-accessible | current | A number between 1 and N that identifies a table row, and that serves to link entries in this table to those in etsysESwitchProtocolTable. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.1.1.2 | ColumnetsysESwitchEtherTypeValue | read-create | current | Defines an EtherType for use with etsysESwitchESwitchProtocolTable. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.1.1.3 | ColumnetsysESwitchEtherTypeStatus | read-create | current | This object indicates the administrative status of this entry. other(1) - This entry is currently in effect, but the conditions under which it will remain so d… |
| 1.3.6.1.4.1.5624.1.2.10.1.4.1.1.4 | ColumnetsysESwitchEtherTypePreempted | read-only | current | If true, indicates that the switch has taken control of this row and its associated resources (e.g., to support 802.1x authentication). |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2 | TableetsysESwitchProtocolTable | not-accessible | current | A table for configuring, and obtaining information about, protocol- based filtering and VLAN assignment. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1 | RowetsysESwitchProtocolEntry | not-accessible | current | Each row in etsysESwitchProtocolTable holds filtering instructions, or VLAN classification instructions, for one (port, protocol) pair. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.1 | ColumnetsysESwitchProtocolReceivePort | not-accessible | current | Identifies the receive port to which the protocol filter is to be applied. The value '0' (when allowed) represents 'all ports'. |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.2 | ColumnetsysESwitchProtocolType | not-accessible | current | Identifies the protocol type. The switch chip in the RoamAbout M2 can recognize nine predefined high-level protocol types, and up to three user-defined EtherTy… |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.3 | ColumnetsysESwitchProtocolIndex | not-accessible | current | When etsysESwitchProtocolType indicates a user-defined protocol type, this index should identify the corresponding protocol definition. That is, to say, for a … |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.4 | ColumnetsysESwitchProtocolConstraint | read-create | current | Indicates what type of constraint the switch should apply to packets caught by the (port, protocol) filter. portMask(1) - Use the etsysESwitchProtocolAllowedTo… |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.5 | ColumnetsysESwitchProtocolAllowedToGoTo | read-create | current | A port mask object indicating where packets that match this row's (port, protocol) filter are allowed to go. It applies when etsysESwitchProtocolConstraint has… |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.6 | ColumnetsysESwitchProtocolVlanId | read-create | current | A number identifying a VLAN to which packets that match this row's (port, protocol) filter should be assigned. It applies when etsysESwitchProtocolConstraint h… |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.7 | ColumnetsysESwitchProtocolStatus | read-create | current | This object indicates the administrative status of this entry. other(1) - This entry is currently in effect, but the conditions under which it will remain so d… |
| 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.8 | ColumnetsysESwitchProtocolPreempted | read-only | current | If true, indicates that the switch has taken control of this row and its associated resources (e.g., to support 802.1x authentication). |
| 1.3.6.1.4.1.5624.1.2.10.2 | NodeetsysESwitchConformance | |||
| 1.3.6.1.4.1.5624.1.2.10.2.1 | NodeetsysESwitchGroups | |||
| 1.3.6.1.4.1.5624.1.2.10.2.1.1 | GroupetsysESwitchBaseGroup | current | The basic etsysESwitch objects. | |
| 1.3.6.1.4.1.5624.1.2.10.2.1.2 | GroupetsysESwitchEtherTypeGroup | current | A collection of objects for configuring user-defined EtherTypes. | |
| 1.3.6.1.4.1.5624.1.2.10.2.1.3 | GroupetsysESwitchProtocolGroup | current | A collection of objects for configuring protocol-based filtering. | |
| 1.3.6.1.4.1.5624.1.2.10.2.2 | NodeetsysESwitchCompliances | |||
| 1.3.6.1.4.1.5624.1.2.10.2.2.1 | ComplianceetsysESwitchCompliance | read-only | current | The compliance statement for devices that support Extended Switch. |