ENTERASYS-IEEE802DOT11EXT-MIB
49 objects
This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the IEEE802Dot11 MIB. This Enterasys Networks Proprietary MIB was designed to be used for read-write access to configuration objects not provided by IEEE802.11 MIB, or any other standard MIB.
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| IEEE802dot11-MIB | dot11WEPDefaultKeyIndex |
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | AutonomousType MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5624.1.2.9 | IdentityetsysDot11ExtMIB | This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the IEEE802Dot11 MIB. This Enterasys N… | ||
| 1.3.6.1.4.1.5624.1.2.9.1 | NodeetsysDot11ExtObjects | |||
| 1.3.6.1.4.1.5624.1.2.9.1.1 | NodeetsysDot11ExtLinkTest | |||
| 1.3.6.1.4.1.5624.1.2.9.1.1.1 | TableetsysDot11ExtLinkTestTable | not-accessible | current | This table contains objects to test the link between a requester (entity which sends out the management request message) and a responder (entity which responds… |
| 1.3.6.1.4.1.5624.1.2.9.1.1.1.1 | RowetsysDot11ExtLinkTestEntry | not-accessible | current | An Entry (conceptual row) in the LinkTest Table. By means of message transmission between requester and responder, the communication quality between the two st… |
| 1.3.6.1.4.1.5624.1.2.9.1.1.1.1.1 | ColumnetsysDot11ExtLTRemoteStationMAC | read-write | current | The MAC address for the remote station to participate in the Link Test. To initiate a search for a participating station, write the broadcast address (FF-FF-FF… |
| 1.3.6.1.4.1.5624.1.2.9.1.1.1.1.2 | ColumnetsysDot11ExtLTRemoteStationName | read-only | current | The wireless station name of the remote station participating in the Link Test. |
| 1.3.6.1.4.1.5624.1.2.9.1.1.1.1.3 | ColumnetsysDot11ExtLTTrigger | read-write | current | Writing a 1 to this variable causes a single Link Test request message to be sent to the remote station. |
| 1.3.6.1.4.1.5624.1.2.9.1.1.1.1.4 | ColumnetsysDot11ExtLTRemoteContents | read-only | current | The exact byte-by-byte contents of the Link Test packet returned by the remote station. |
| 1.3.6.1.4.1.5624.1.2.9.1.2 | NodeetsysDot11ExtGeneral | |||
| 1.3.6.1.4.1.5624.1.2.9.1.2.1 | TableetsysDot11ExtGeneralTable | not-accessible | current | This table contains all the objects that must be configured on every radio card installed in the Access Point regardless of the operating mode in use. |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1 | RowetsysDot11ExtGeneralEntry | not-accessible | current | An Entry (conceptual row) in the Dot11General Table. This allows for multiple instances of radio cards in the Access Point. |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.1 | ColumnetsysDot11ExtPCCardType | read-only | current | The type of PC card inserted in the Access Point. |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.2 | ColumnetsysDot11ExtPCCardVersions | read-only | current | Specifies the version identifiers for the PC card. This will indicate both the Hardware and the Firmware versions. |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3 | ColumnetsysDot11ExtBridgeMode | read-write | current | CURRENT Access Point bridge mode state. In workgroup mode all communications between clients passes through the Access Point. LAN-to-LAN mode is the improved n… |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4 | ColumnetsysDot11ExtResetOptions | read-write | current | noReset (0) No reset is performed. A 'get' on this object always returns this value. resetRadioCardIfNecessary (1) Some parameters can only be given to the car… |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.5 | ColumnetsysDot11ExtSystemScale | read-write | current | Specifies the CURRENT Access Point density in the Extended Service Set (ESS). This object must be saved across a system reset and/or a power cycle. |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.6 | ColumnetsysDot11ExtSecureAccess | read-write | current | When this mode is set to enabled, the AP will only associate with stations that have the same network name as the AP. When this mode is set to disabled, a stat… |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.7 | ColumnetsysDot11ExtMulticastTxRate | read-write | current | This value specifies the Multicast data transmission rate of the AP. It is implemented when cards that operate faster than the 2Mbit 802.11 standard are insert… |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8 | ColumnetsysDot11ExtIntraBSSRelay | read-write | current | When this mode is enabled the AP entity within the PC Card will relay frames to destined for stations associated with it and will NOT forward them to the bridg… |
| 1.3.6.1.4.1.5624.1.2.9.1.2.1.1.9 | ColumnetsysDot11ExtStationName | read-write | current | DURABLE: The wireless station name sent out as part of the beacon messages. Valid only when a DS card is inserted in the Access Point. |
| 1.3.6.1.4.1.5624.1.2.9.1.3 | NodeetsysDot11ExtBldg | |||
| 1.3.6.1.4.1.5624.1.2.9.1.3.1 | TableetsysDot11ExtBldgTable | not-accessible | current | This table contains the objects required to enable the Access Point to operate in Point-to-MultiPoint mode. |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1 | RowetsysDot11ExtBldgEntry | not-accessible | current | An Entry (conceptual row) in the Dot11Bldg Table. A collection of objects containing information for activating and using the Access Point in Point-to-MultiPoi… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.1 | ColumnetsysDot11ExtBldgRemoteMAC1 | read-write | current | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycl… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.2 | ColumnetsysDot11ExtBldgRemoteMAC2 | read-write | current | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycl… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.3 | ColumnetsysDot11ExtBldgRemoteMAC3 | read-write | current | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycl… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.4 | ColumnetsysDot11ExtBldgRemoteMAC4 | read-write | current | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycl… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.5 | ColumnetsysDot11ExtBldgRemoteMAC5 | read-write | current | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycl… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.6 | ColumnetsysDot11ExtBldgRemoteMAC6 | read-write | current | The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycl… |
| 1.3.6.1.4.1.5624.1.2.9.1.3.1.1.7 | ColumnetsysDot11ExtBldgMPActivationKey | read-write | current | Point-to-multipoint bridge mode requires an activation key to enable. A valid multipoint activation key must be entered as a string of ACSCII characters transl… |
| 1.3.6.1.4.1.5624.1.2.9.1.4 | NodeetsysDot11ExtWEP | |||
| 1.3.6.1.4.1.5624.1.2.9.1.4.1 | TableetsysDot11ExtWEPDefaultKeysTable | not-accessible | current | Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP… |
| 1.3.6.1.4.1.5624.1.2.9.1.4.1.1 | RowetsysDot11ExtWEPDefaultKeysEntry | not-accessible | current | An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so… |
| 1.3.6.1.4.1.5624.1.2.9.1.4.1.1.1 | ColumnetsysDot11ExtWEPKeyDefined | read-only | current | The state column used for determining if an encryption key is set (true) or not (false), false is the default value. |
| 1.3.6.1.4.1.5624.1.2.9.1.4.1.1.2 | ColumnetsysDot11ExtWEPKeyValue | read-write | current | A WEP default secret key value. For 40-bit encryption use 5 printable characters or 10 HEX digits. For 128-bit encryption use 13 printable characters or 26 HEX… |
| 1.3.6.1.4.1.5624.1.2.9.1.4.2 | TableetsysDot11ExtWEPEnhancedTable | not-accessible | current | Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP… |
| 1.3.6.1.4.1.5624.1.2.9.1.4.2.1 | RowetsysDot11ExtWEPEnhancedEntry | not-accessible | current | An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so… |
| 1.3.6.1.4.1.5624.1.2.9.1.4.2.1.1 | ColumnetsysDot11ExtWEPEnhancedImplemented | read-only | current | This value indicates whether the AP is capable of Enhanced Wireless Equivalent Privacy (WEP), using 128-bit keys. |
| 1.3.6.1.4.1.5624.1.2.9.1.5 | NodeetsysDot11ExtEffect | |||
| 1.3.6.1.4.1.5624.1.2.9.1.5.1 | TableetsysDot11ExtOIDNotInEffectTable | not-accessible | current | This table will be used to determine which wireless parameters have been modified but are not yet in effect. These parameters will not take effect until a rese… |
| 1.3.6.1.4.1.5624.1.2.9.1.5.1.1 | RowetsysDot11ExtOIDNotInEffectEntry | not-accessible | current | |
| 1.3.6.1.4.1.5624.1.2.9.1.5.1.1.1 | ColumnetsysDot11ExtOIDIndex | not-accessible | current | This object will keep a list of OIDS |
| 1.3.6.1.4.1.5624.1.2.9.1.5.1.1.2 | ColumnetsysDot11ExtOIDNotInEffect | read-only | current | This object specifies if the OID being accesed currently has been changed but is not in effect. |
| 1.3.6.1.4.1.5624.1.2.9.2 | NodeetsysDot11ExtConformance | |||
| 1.3.6.1.4.1.5624.1.2.9.2.1 | NodeetsysDot11ExtGroups | |||
| 1.3.6.1.4.1.5624.1.2.9.2.1.1 | GroupetsysDot11ExtBaseGroup | current | The basic etsysDot11Ext stuff. | |
| 1.3.6.1.4.1.5624.1.2.9.2.2 | NodeetsysDot11ExtCompliances | |||
| 1.3.6.1.4.1.5624.1.2.9.2.2.1 | ComplianceetsysDot11ExtCompliance | current | The compliance statement for devices that support 802Dot11 extensions. |