MIB Viewer

ENTERASYS-LINK-FLAP-MIB

30 objects
This is the MIB module for Enterasys Link Flap Detection, a mechanism to automatically limit the effect of frequent link state transitions on Enterasys devices.
Imported Objects
ENTERASYS-MIB-NAMESetsysModules
IF-MIBifIndex ifName
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCTEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.5624.1.2.52IdentityetsysLinkFlapMIBThis is the MIB module for Enterasys Link Flap Detection, a mechanism to automatically limit the effect of frequent link state transitions on Enterasys devices.
1.3.6.1.4.1.5624.1.2.52.1NodeetsysLinkFlapObjects
1.3.6.1.4.1.5624.1.2.52.1.0NodeetsysLinkFlapNotificationBranch
1.3.6.1.4.1.5624.1.2.52.1.0.1NotificationetsysLinkFlapViolationcurrentIf the Link Flap feature is globally enabled and specifically enabled for this interface, then this trap is sent when a link state transition is detected which…
1.3.6.1.4.1.5624.1.2.52.1.1NodeetsysLinkFlapSystemBranch
1.3.6.1.4.1.5624.1.2.52.1.1.1ScalaretsysLinkFlapSystemStateread-writecurrentThe current state of the active part of the Link Flap feature. enabled (1) - All supported aspects of Link Flap are operational. disabled (2) - Link Flap is co…
1.3.6.1.4.1.5624.1.2.52.1.1.2ScalaretsysLinkFlapSystemSupportedActionsread-onlycurrentThe supported actions that the Link Flap feature can take when link flap activity exceeds the associated threshold on this interface. disableInterface(0) - Cap…
1.3.6.1.4.1.5624.1.2.52.1.1.3ScalaretsysLinkFlapSystemLinkFlapMaximumread-onlycurrentThe greatest number of linkdown events which can occur per ten second interval. This is an implementation-specific parameter which will determine the allowable…
1.3.6.1.4.1.5624.1.2.52.1.2NodeetsysLinkFlapInterfaceBranch
1.3.6.1.4.1.5624.1.2.52.1.2.1TableetsysLinkFlapInterfaceTablenot-accessiblecurrentA table that provides for the configuration, status, and statistics related to, the Link Flap feature on a per interface basis.
1.3.6.1.4.1.5624.1.2.52.1.2.1.1RowetsysLinkFlapInterfaceEntrynot-accessiblecurrentThe configuration, status, and statistics related to, the Link Flap feature for an individual interface.
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.1ColumnetsysLinkFlapIntfEnabledStatusread-writecurrentThe enable state of Link Flap on this interface. Transitioning from enabled(1) to disabled(2) will disable the active part of the Link Flap feature as defined …
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.2ColumnetsysLinkFlapIntfActionread-writecurrentThe configured actions that the Link Flap feature can take when link flap activity exceeds the associated threshold on this interface. disableInterface(0) - In…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.3ColumnetsysLinkFlapIntfOperStatusread-writecurrentThe current status of the interface with respect to Link Flap detection. A read of operational(1) indicates that the Link Flap feature has not taken any action…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.4ColumnetsysLinkFlapIntfClearStatsread-writecurrentWhen set to true(1) the following objects: etsysLinkFlapIntfLinkdownCountCurrent etsysLinkFlapIntfLinkdownCountTotal etsysLinkFlapIntfLinkFlapViolations in thi…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.5ColumnetsysLinkFlapIntfCountThresholdread-writecurrentThe threshold count of link state transitions, which if exceeded within time limit etsysLinkFlapIntfTimeInterval, necessitates actions specified in LinkFlapInt…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.6ColumnetsysLinkFlapIntfTimeIntervalread-writecurrentThe time period during which link state transitions accrue toward the threshold count etsysLinkFlapIntfCountThreshold. Setting etsysLinkFlapIntfTimeInterval su…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.7ColumnetsysLinkFlapIntfDownTimeread-writecurrentThe time period during which the violating interface operational status may be held to 'down' by the LinkFlap functionality. Note that one special value, 0 (ze…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.8ColumnetsysLinkFlapIntfLinkdownCountCurrentread-onlycurrentThe current number of link state transitions accrued during the current monitor interval. This information is always available and current. Maintaining the val…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.9ColumnetsysLinkFlapIntfLinkdownCountTotalread-onlycurrentThe total number of link state transitions accrued on this interface. Discontinuities in the value of this counter can occur at re-initialization of the manage…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.10ColumnetsysLinkFlapIntfCurrentElapsedread-onlycurrentThe current number of completed system ticks accrued on this interface during the current monitor interval. Discontinuities in the value of this counter can oc…
1.3.6.1.4.1.5624.1.2.52.1.2.1.1.11ColumnetsysLinkFlapIntfLinkFlapViolationsread-onlycurrentThe total number of link flap violations accrued on this interface. Discontinuities in the value of this counter can occur at re-initialization of the manageme…
1.3.6.1.4.1.5624.1.2.52.2NodeetsysLinkFlapConformance
1.3.6.1.4.1.5624.1.2.52.2.1NodeetsysLinkFlapGroups
1.3.6.1.4.1.5624.1.2.52.2.1.1GroupetsysLinkFlapSystemGroupcurrentA collection of objects providing global configuration and status for the Link Flap feature.
1.3.6.1.4.1.5624.1.2.52.2.1.2GroupetsysLinkFlapInterfaceGroupcurrentA collection of objects providing interface based configuration, status, and statistics of the Link Flap feature.
1.3.6.1.4.1.5624.1.2.52.2.1.3GroupetsysLinkFlapNotificationGroupcurrentA collection of notifications for violation of link state transition rates on individual interfaces.
1.3.6.1.4.1.5624.1.2.52.2.2NodeetsysLinkFlapCompliances
1.3.6.1.4.1.5624.1.2.52.2.2.1ComplianceetsysLinkFlapComplianceread-onlycurrentThe compliance statement for devices that support Link Flap.
Type Definitions
NameSyntaxStatusDescription
LinkFlapIntfActionBITS { disableInterface(0), generateSyslogEntry(1), generateNotification(2) }currentThe possible actions that the Link Flap feature can take when link flap activity exceeds the associated action limits. disableInterface(0) - Operationally disable the interface, ifOperStatus for the interface MUST go in…