ENTERASYS-MSTP-MIB
82 objects
This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to the Multiple Spanning Tree Protocol defined by IEEE 802.1s. This MIB is used to manage devices which support MSTP. It will be supported until a standard IEEE 802.1s MIB has been defined by the IETF.
Imported Objects
| BRIDGE-MIB | BridgeId |
| ENTERASYS-MIB-NAMES | etsysModules |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5624.1.2.28 | IdentityetsysMstpMIB | This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to the Multiple Spanning Tree Protocol define… | ||
| 1.3.6.1.4.1.5624.1.2.28.1 | NodeetsysMstpObjects | |||
| 1.3.6.1.4.1.5624.1.2.28.1.0 | NodeetsysMstpNotifications | |||
| 1.3.6.1.4.1.5624.1.2.28.1.0.1 | NotificationetsysMstpLoopProtectEvent | current | This notification indicates that a Loop Protect event has occurred on a bridge port on an MSTI. | |
| 1.3.6.1.4.1.5624.1.2.28.1.1 | NodeetsysMstpConfig | |||
| 1.3.6.1.4.1.5624.1.2.28.1.1.1 | ScalaretsysMstpMaxMstId | read-only | current | The maximum Multiple Spanning Tree (MST) instance ID that this device supports. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.2 | ScalaretsysMstpMaxSupportedMsts | read-only | current | The maximum number of Multiple Spanning Tree instances that this device supports. The value of this object is not affected by the value of etsysMstpMaxConfigur… |
| 1.3.6.1.4.1.5624.1.2.28.1.1.3 | ScalaretsysMstpNumMsts | read-only | current | The current number of Multiple Spanning Tree instances that are configured in this device. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.4 | TableetsysMstpMstiTable | not-accessible | current | The list of configured Multiple Spanning Tree instances. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.4.1 | RowetsysMstpMstiEntry | not-accessible | current | A table entry representing a Multiple Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.4.1.1 | ColumnetsysMstpMstId | not-accessible | current | The unique ID of this Multiple Spanning Tree instance. This value SHALL be between 1 and etsysMstpMaxMstId inclusively. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.4.1.2 | ColumnetsysMstpMstiStatus | read-create | current | This object allows for the dynamic creation and deletion of the corresponding Spanning Tree instance. Creation and activation of a conceptual row in this table… |
| 1.3.6.1.4.1.5624.1.2.28.1.1.5 | TableetsysMstpAllocTable | not-accessible | current | A table that contains the mapping of Filtering Databases to Spanning Tree instances. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.5.1 | RowetsysMstpAllocEntry | not-accessible | current | The mapping of a particular Filtering Database to a Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.5.1.1 | ColumnetsysMstpFdbId | not-accessible | current | The unique ID of the Filtering Database to which the information in this table entry applies. This value SHALL be between 1 and dot1qMaxVlanId inclusively. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.5.1.2 | ColumnetsysMstpMstIdOfFdb | read-write | current | The ID of the Spanning Tree instance to which the corresponding FID is mapped. This ID must either be 0 (i.e., the CIST) or be a value which is present in the … |
| 1.3.6.1.4.1.5624.1.2.28.1.1.6 | TableetsysMstpConfigTable | not-accessible | current | A table that contains the mapping of VLANs to Spanning Tree instances. This table is a read-only table, its elements derived from the VID to FID allocation tab… |
| 1.3.6.1.4.1.5624.1.2.28.1.1.6.1 | RowetsysMstpConfigEntry | not-accessible | current | The mapping of a particular VLAN to a Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.6.1.1 | ColumnetsysMstpVlanId | not-accessible | current | The unique ID of the VLAN to which the information in this table entry applies. This value SHALL be between 1 and dot1qMaxVlanId inclusively. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.6.1.2 | ColumnetsysMstpMstIdOfVlan | read-only | current | The ID of the Spanning Tree instance to which the corresponding VLAN is mapped. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.7 | ScalaretsysMstpFormatSelector | read-only | current | The format selector value of the Configuration Identifier. This has a value of 0 to indicate the format specified in the IEEE 802.1s standard. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.8 | ScalaretsysMstpConfigName | read-write | current | The configuration name of the MST region to which this bridge belongs. The default value is the Bridge Address of this bridge, as a text string using the Hexad… |
| 1.3.6.1.4.1.5624.1.2.28.1.1.9 | ScalaretsysMstpRevisionLevel | read-write | current | The revision level of the MST region to which this bridge belongs. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.10 | ScalaretsysMstpConfigDigest | read-only | current | The Configuration Digest derived from the MST Configuration Table. |
| 1.3.6.1.4.1.5624.1.2.28.1.1.11 | ScalaretsysMstpMaxConfigurableMsts | read-write | current | The maximum number of Multiple Spanning Tree instances that can configured on this entity. This object cannot be set to a value greater than the value of etsys… |
| 1.3.6.1.4.1.5624.1.2.28.1.2 | NodeetsysMstpBridge | |||
| 1.3.6.1.4.1.5624.1.2.28.1.2.1 | ScalaretsysMstpCistRegionalRootIdentifier | read-only | current | The Bridge Identifier of the current CIST Regional Root. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.2 | ScalaretsysMstpCistPathCost | read-only | current | The CIST path cost from this bridge to the CIST Regional Root. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.3 | ScalaretsysMstpMaxHopCount | read-write | current | The maximum number of hops that the information for a particular Spanning Tree instance may traverse (via relay of BPDUs within the applicable MST region) befo… |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4 | TableetsysMstpBridgeTable | not-accessible | current | A table that contains bridge protocol parameter values associated with each configured Multiple Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1 | RowetsysMstpBridgeEntry | not-accessible | current | A list of information maintained by each Multiple Spanning Tree instance configured on this bridge. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.1 | ColumnetsysMstpBridgePriority | read-write | current | The value of the priority component of the Bridge ID for the corresponding Spanning Tree instance. Specifically, the four most significant bits of the most sig… |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.2 | ColumnetsysMstpTimeSinceTopologyChange | read-only | current | The elapsed time, in units of hundredths of a second, since the last time a topology change was detected by the corresponding Spanning Tree instance (specifica… |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.3 | ColumnetsysMstpTopologyChangeCount | read-only | current | The total number of topology changes detected by the corresponding Spanning Tree instance since the management entity was last reset or initialized (specifical… |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.4 | ColumnetsysMstpTopologyChangeInProgress | read-only | current | True(1) if the tcWhile timer is non-zero for any port for the corresponding Spanning Tree instance, false(2) otherwise. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.5 | ColumnetsysMstpDesignatedRoot | read-only | current | The bridge identifier of the root for the corresponding Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.6 | ColumnetsysMstpRootPathCost | read-only | current | The cost of the path to the root of the corresponding Spanning Tree instance as seen from this bridge. |
| 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.7 | ColumnetsysMstpRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge for the corresponding Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.3 | NodeetsysMstpPort | |||
| 1.3.6.1.4.1.5624.1.2.28.1.3.1 | TableetsysMstpPortTable | not-accessible | current | A table that contains port parameter values for each configured Multiple Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1 | RowetsysMstpPortEntry | not-accessible | current | A list of information maintained for every port by each Multiple Spanning Tree instance configured on this bridge. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.1 | ColumnetsysMstpPortNumber | not-accessible | current | The port number of the port for which this entry contains Multiple Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.2 | ColumnetsysMstpPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID for the corresponding Spanning Tree… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.3 | ColumnetsysMstpPortState | read-only | current | The port's current state in the corresponding Spanning Tree instance as defined by application of the Multiple Spanning Tree Protocol. This state controls what… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.4 | ColumnetsysMstpPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths towards the root of the corresponding Spanning Tree instance. W… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.5 | ColumnetsysMstpPortOperPathCost | read-only | current | The operational value for the contribution of this port to the path cost of paths towards the root of the corresponding Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.6 | ColumnetsysMstpPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root of the corresponding Spanning Tree in the Configuration BPDUs transmitted by the Designated Bri… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.7 | ColumnetsysMstpPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port, for the corresponding Spanning Tree instance. This value is compared to the Root Pa… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.8 | ColumnetsysMstpPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment on the corresponding Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.9 | ColumnetsysMstpPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment on the corresponding Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.10 | ColumnetsysMstpPortRoleValue | read-only | current | Indicates this port's role on the corresponding Spanning Tree instance. disabled root instance. designated port on this MST instance. alternate on this MST ins… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.2 | TableetsysMstpGlobalPortTable | not-accessible | current | A table that contains port parameter values which apply to all Spanning Tree instances. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.2.1 | RowetsysMstpGlobalPortEntry | not-accessible | current | A list of information maintained for every port which applies to all Spanning Tree instances. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.2.1.1 | ColumnetsysMstpHelloTime | read-only | current | The amount of time, in hundredths of a second, between the transmission of Configuration bridge PDUs on this port when it has the role of designated port for a… |
| 1.3.6.1.4.1.5624.1.2.28.1.3.2.1.2 | ColumnetsysMstpPortHelloTime | read-write | current | The value, in hundredths of a second, that all bridges attached to this port's LAN segment use for HelloTime when this bridge is acting as the CIST root. |
| 1.3.6.1.4.1.5624.1.2.28.1.3.2.1.3 | ColumnetsysMstpBoundaryPort | read-only | current | True(1) if this port is attached to a LAN which is in a different MST Region than this bridge, false(2) otherwise. |
| 1.3.6.1.4.1.5624.1.2.28.1.4 | NodeetsysMstpExtn | |||
| 1.3.6.1.4.1.5624.1.2.28.1.4.1 | ScalaretsysMstpAutoEdgeDetection | read-write | current | The enabled/disabled status of automatic edge detection. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.2 | ScalaretsysMstpBridgeHelloTimeMode | read-write | current | The enabled/disabled status of the legacy bridge hello mode of operation. When enabled, and this bridge is acting as the root bridge, dot1dStpBridgeHelloTime i… |
| 1.3.6.1.4.1.5624.1.2.28.1.4.3 | TableetsysMstpMstiExtnTable | not-accessible | current | Extensions to the table of Multiple Spanning Tree instances. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.3.1 | RowetsysMstpMstiExtnEntry | not-accessible | current | A list of extensions to the information maintained for each Multiple Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.3.1.1 | ColumnetsysMstpMstiExtnBackupRootEnable | read-write | current | The enabled/disabled status of the Backup Root functionality on this MSTI. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.4 | TableetsysMstpPortExtnTable | not-accessible | current | Extensions to the table that contains port parameter values for each configured Multiple Spanning Tree instance. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.4.1 | RowetsysMstpPortExtnEntry | not-accessible | current | A list of extensions to the information maintained for every port by each Multiple Spanning Tree instance configured on this bridge. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.4.1.1 | ColumnetsysMstpPortExtnNonForwardingReason | read-only | current | Indicates the reason why this port has been placed in a non-forwarding state on this MSTI (other than as a result of normal Spanning Tree protocol operation). … |
| 1.3.6.1.4.1.5624.1.2.28.1.4.4.1.2 | ColumnetsysMstpPortExtnLoopProtectEnable | read-write | current | The enabled/disabled status of the Loop Protect functionality for this port on this MSTI. |
| 1.3.6.1.4.1.5624.1.2.28.1.4.4.1.3 | ColumnetsysMstpPortExtnLoopProtectBlocking | read-write | current | The state of this port on this MSTI with respect to the Loop Protect feature. true(1) - this port is being held in the blocking state by the Loop Protect featu… |
| 1.3.6.1.4.1.5624.1.2.28.2 | NodeetsysMstpConformance | |||
| 1.3.6.1.4.1.5624.1.2.28.2.1 | NodeetsysMstpGroups | |||
| 1.3.6.1.4.1.5624.1.2.28.2.1.1 | GroupetsysMstpConfigGroup | current | A collection of objects providing configuration support for the Multiple Spanning Tree Protocol. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.2 | GroupetsysMstpBridgeGroup | current | A collection of objects providing bridge-level support for the Multiple Spanning Tree Protocol. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.3 | GroupetsysMstpPortGroup | current | A collection of objects providing port-level support for the Multiple Spanning Tree Protocol. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.4 | GroupetsysMstpAutoEdgeDetectGroup | current | An object for controlling Auto Edge Detection. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.5 | GroupetsysMstpBridgeHelloTimeGroup | current | An object for modifying the Hello Time mode. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.6 | GroupetsysMstpBackupRootGroup | current | An object for enabling and disabling the Backup Root feature. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.7 | GroupetsysMstpMaxInstancesGroup | current | An object for restricting the number of configurable MSTIs. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.8 | GroupetsysMstpNonForwardingReasonGroup | current | An object that indicates the reason for an exceptional non-forwarding condition per port/MSTI. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.9 | GroupetsysMstpLoopProtectGroup | current | A collection of objects providing support for the Loop Protect feature. | |
| 1.3.6.1.4.1.5624.1.2.28.2.1.10 | GroupetsysMstpLoopProtectNotificationGroup | current | The Loop Protect Event Notification for MSTIs. | |
| 1.3.6.1.4.1.5624.1.2.28.2.2 | NodeetsysMstpCompliances | |||
| 1.3.6.1.4.1.5624.1.2.28.2.2.1 | ComplianceetsysMstpCompliance | current | The compliance statement for devices that support the Multiple Spanning Tree Protocol. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HexString | OCTET STRING (SIZE (0..1024)) | current | An OCTET-STRING with a suitable display hint. |