ENTERASYS-RIPv2-EXT-MIB
17 objects
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the RIPv2 configuration This MIB was designed to be used for configuring the RIP-2 protocol parameters.
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5624.1.2.66 | IdentityetsysRip2ExtMIB | This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the RIPv2 configuration This MIB was designed to be… | ||
| 1.3.6.1.4.1.5624.1.2.66.1 | NodeetsysRip2ExtObjects | |||
| 1.3.6.1.4.1.5624.1.2.66.1.1 | NodeetsysRip2ExtGlobals | |||
| 1.3.6.1.4.1.5624.1.2.66.1.1.1 | ScalaretsysRip2ExtAdminStatus | read-write | current | The current administrative state of the RIP protocol. Setting this object to adminStatusUp turns on the RIP protocol, while setting it to adminStatusDown turns… |
| 1.3.6.1.4.1.5624.1.2.66.1.1.2 | ScalaretsysRip2ExtOperStatus | read-only | current | The current operational state of the RIP Protocol. Changing the state of the etsysRip2ExtAdminStatus object may effect the state of this object. If etsysRip2Ex… |
| 1.3.6.1.4.1.5624.1.2.66.1.1.3 | ScalaretsysRip2ExtMaxEcmpHops | read-write | current | The maximum number of equal-cost next hops that RIP can program in the Routing Table Manager. Changing this value causes RIP to refresh all of its routes in th… |
| 1.3.6.1.4.1.5624.1.2.66.1.1.4 | ScalaretsysRip2ExtRefreshInterval | read-write | current | The frequency at which RIP sends periodic updates to all of its peers. A change to this value takes effect after the next periodic update is sent. |
| 1.3.6.1.4.1.5624.1.2.66.1.1.5 | ScalaretsysRip2ExtTriggeredDelayMin | read-write | current | The lower bound of the random time period that RIP waits between sending Triggered Updates. A change to this value takes effect after the next Triggered Update… |
| 1.3.6.1.4.1.5624.1.2.66.1.1.6 | ScalaretsysRip2ExtTriggeredDelayMax | read-write | current | The upper bound of the random time period that RIP waits between sending Triggered Updates. A change to this value takes effect after the next Triggered Update… |
| 1.3.6.1.4.1.5624.1.2.66.1.1.7 | ScalaretsysRip2ExtRouteCheckInterval | read-write | current | The frequency with which RIP checks the routing table for expired routes. A change to this value takes effect after the next scheduled route check. |
| 1.3.6.1.4.1.5624.1.2.66.1.1.8 | ScalaretsysRip2ExtRouteExpiryInterval | read-write | current | The period from the point of the last refresh after which a route received from a peer times out and is marked as expired. This period is expressed as a multip… |
| 1.3.6.1.4.1.5624.1.2.66.1.1.9 | ScalaretsysRip2ExtRouteFlushInterval | read-write | current | The period from the point of route expiry that a route is finally removed from the routing table, also known as the 'garbage collection time'. This period is e… |
| 1.3.6.1.4.1.5624.1.2.66.2 | NodeetsysRip2ExtConformance | |||
| 1.3.6.1.4.1.5624.1.2.66.2.1 | NodeetsysRip2ExtGroups | |||
| 1.3.6.1.4.1.5624.1.2.66.2.1.1 | GroupetsysRip2ExtGlobalGroup | current | This group defines global controls for Enterasys RIPv2 systems. | |
| 1.3.6.1.4.1.5624.1.2.66.2.2 | NodeetsysRip2ExtCompliances | |||
| 1.3.6.1.4.1.5624.1.2.66.2.2.1 | ComplianceetsysRip2ExtCompliance | current | The compliance statement for devices that support etsysRip2Ext. |