ENTERASYS-SNTP-CLIENT-MIB
52 objects
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to SNTP client configuration and statistical collection.
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5624.1.2.38 | IdentityetsysSntpClientMIB | This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to SNTP client configuration and statistical collectio… | ||
| 1.3.6.1.4.1.5624.1.2.38.1 | NodeetsysSntpClientObjects | |||
| 1.3.6.1.4.1.5624.1.2.38.1.1 | NodeetsysSntpClientDevice | |||
| 1.3.6.1.4.1.5624.1.2.38.1.1.1 | ScalaretsysSntpClientVersion | read-only | current | The SNTP version this device supports. As specified in RFC 2030, higher versions are required to be backwards compatible with all lower versions with the excep… |
| 1.3.6.1.4.1.5624.1.2.38.1.1.2 | ScalaretsysSntpClientSupportedMode | read-only | current | The SNTP client operational modes that this device supports. |
| 1.3.6.1.4.1.5624.1.2.38.1.1.3 | ScalaretsysSntpClientMode | read-write | current | The current operational mode of the SNTP client. A SET of this object will cause the SNTP client to change operational modes. A SET request MUST have only 1 bi… |
| 1.3.6.1.4.1.5624.1.2.38.1.1.4 | ScalaretsysSntpClientLastUpdateTime | read-only | current | The local date and time that the SNTP client last updated the system time on the device since agent reboot. This time is updated for all non-disabled operation… |
| 1.3.6.1.4.1.5624.1.2.38.1.1.5 | ScalaretsysSntpClientLastAttemptTime | read-only | current | The local date and time of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. Essentially, this value is a timestamp fo… |
| 1.3.6.1.4.1.5624.1.2.38.1.1.6 | ScalaretsysSntpClientLastAttemptStatus | read-only | current | The status of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. The status is updated for all non-disabled operational… |
| 1.3.6.1.4.1.5624.1.2.38.1.2 | NodeetsysSntpClientUnicast | |||
| 1.3.6.1.4.1.5624.1.2.38.1.2.1 | ScalaretsysSntpClientUnicastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. This polling interval is used for directed SNTP requests in unicast(1) operational mode. M… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.2 | ScalaretsysSntpClientUnicastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This timeout is used for directed SNTP requ… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.3 | ScalaretsysSntpClientUnicastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. This retry count is used for directed SNTP requests in unicast(1) … |
| 1.3.6.1.4.1.5624.1.2.38.1.2.4 | ScalaretsysSntpClientUServerMaxEntries | read-only | current | The maximum number of server entries that are allowed in the etsysSntpClientUServerTable. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.5 | ScalaretsysSntpClientUServerCurrEntries | read-only | current | The current number of server entries in the etsysSntpClientUServerTable. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6 | TableetsysSntpClientUServerTable | not-accessible | current | A table containing configuration and statistical information for unicast SNTP servers. Each server entry is represented by single conceptual row in this table. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1 | RowetsysSntpClientUServerEntry | not-accessible | current | Information for a particular unicast SNTP server. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.1 | ColumnetsysSntpClientUServerAddrType | not-accessible | current | This object specifies how etsysSntpClientUServerAddr is encoded. Support for all possible enumerations defined by InetAddressType is NOT REQUIRED. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.2 | ColumnetsysSntpClientUServerAddr | not-accessible | current | The encoded unicast IP address or hostname of a SNTP server. Unicast SNTP requests will be sent to this address. If this address is a DNS hostname, then that h… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.3 | ColumnetsysSntpClientUServerPrecedence | read-create | current | The precedence that this server has in relation to its peers in the determining the sequence of servers that SNTP requests will be sent to. When the poll inter… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.4 | ColumnetsysSntpClientUServerLastUpdateTime | read-only | current | The local date and time that the response from this server was used to update the system time on the device since agent reboot. If the SNTP client has not upda… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.5 | ColumnetsysSntpClientUServerLastAttemptTime | read-only | current | The local date and time that this SNTP server was last queried since agent reboot. Essentially, this value is a timestamp for the etsysSntpClientUServerLastAtt… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.6 | ColumnetsysSntpClientUServerLastAttemptStatus | read-only | current | The status of the last SNTP request to this server since agent reboot. If no requests have been made then this object should return 'other'. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.7 | ColumnetsysSntpClientUServerNumRequests | read-only | current | The number of SNTP requests made to this server since the last agent reboot. This includes retry attempts to the server. |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.8 | ColumnetsysSntpClientUServerNumFailedRequests | read-only | current | The number of SNTP requests made to this server that did not result in a successful response since the last agent reboot. This includes retry attempts to the s… |
| 1.3.6.1.4.1.5624.1.2.38.1.2.6.1.9 | ColumnetsysSntpClientUServerStatus | read-create | current | The row status of this conceptual row in the table. active - The server is available for use in SNTP client operations. Other writable leaves in this table MAY… |
| 1.3.6.1.4.1.5624.1.2.38.1.3 | NodeetsysSntpClientMulticast | |||
| 1.3.6.1.4.1.5624.1.2.38.1.3.1 | ScalaretsysSntpClientMulticastDelay | read-write | current | The number of microseconds it takes for an unsolicited SNTP multicast message to travel from the SNTP server to the SNTP client. This value is added to the tim… |
| 1.3.6.1.4.1.5624.1.2.38.1.3.2 | ScalaretsysSntpClientMulticastCount | read-only | current | The number of unsolicited multicast SNTP messages that have been received and processed by the SNTP client. Unsolicited SNTP multicast frames will not be count… |
| 1.3.6.1.4.1.5624.1.2.38.1.4 | NodeetsysSntpClientBroadcast | |||
| 1.3.6.1.4.1.5624.1.2.38.1.4.1 | ScalaretsysSntpClientBroadcastDelay | read-write | current | The number of microseconds it takes for an unsolicited SNTP broadcast message to travel from the SNTP server to the SNTP client. This value is added to the tim… |
| 1.3.6.1.4.1.5624.1.2.38.1.4.2 | ScalaretsysSntpClientBroadcastCount | read-only | current | The number of unsolicited broadcast SNTP messages that have been received and processed by the SNTP client. Unsolicited SNTP broadcast frames will not be count… |
| 1.3.6.1.4.1.5624.1.2.38.1.5 | NodeetsysSntpClientAnycast | |||
| 1.3.6.1.4.1.5624.1.2.38.1.5.1 | ScalaretsysSntpClientAnycastBindRequestInterval | read-write | current | The number of seconds between SNTP anycast bind requests. This polling interval is used when the SNTP client is in anycast(4) operational mode and it is not bo… |
| 1.3.6.1.4.1.5624.1.2.38.1.5.2 | ScalaretsysSntpClientAnycastPollInterval | read-write | current | The number of seconds between SNTP request transmissions. This polling interval is used for directed SNTP requests in anycast(4) operational mode. Maintaining … |
| 1.3.6.1.4.1.5624.1.2.38.1.5.3 | ScalaretsysSntpClientAnycastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the unicast request attempt to have 'timed out'. This timeout is used for di… |
| 1.3.6.1.4.1.5624.1.2.38.1.5.4 | ScalaretsysSntpClientAnycastPollRetry | read-write | current | The number of times to retry a unicast request to a SNTP server that has not successfully responded. This retry count is used for directed SNTP requests in any… |
| 1.3.6.1.4.1.5624.1.2.38.1.5.5 | ScalaretsysSntpClientAnycastServerAddrType | read-only | current | This object specifies how etsysSntpClientAnycastServerAddr is encoded. If the SNTP client is not bound to a server this object MUST return unknown(0). Maintain… |
| 1.3.6.1.4.1.5624.1.2.38.1.5.6 | ScalaretsysSntpClientAnycastServerAddr | read-only | current | The encoded unicast IP address or hostname of the SNTP server that we are bound to in anycast mode. If the SNTP client is not bound to a server this object MUS… |
| 1.3.6.1.4.1.5624.1.2.38.1.5.7 | ScalaretsysSntpClientAnycastNumRequests | read-only | current | The number of anycast bind requests sent from this device since the last agent reboot. |
| 1.3.6.1.4.1.5624.1.2.38.1.5.8 | ScalaretsysSntpClientAnycastNumPollRequests | read-only | current | The number of unicast poll requests sent from this device while in anycast(4) operational mode since the last agent reboot. Unicast poll requests are only sent… |
| 1.3.6.1.4.1.5624.1.2.38.2 | NodeetsysSntpClientConformance | |||
| 1.3.6.1.4.1.5624.1.2.38.2.1 | NodeetsysSntpClientGroups | |||
| 1.3.6.1.4.1.5624.1.2.38.2.1.1 | GroupetsysSntpClientDeviceGroup | current | A collection of objects providing device level control of a SNTP client on Enterasys Network's devices. | |
| 1.3.6.1.4.1.5624.1.2.38.2.1.2 | GroupetsysSntpClientUnicastGroup | current | A collection of objects providing control and statistics for a SNTP client capable of operating in unicast mode. | |
| 1.3.6.1.4.1.5624.1.2.38.2.1.3 | GroupetsysSntpClientMulticastGroup | current | A collection of objects providing control and statistics for a SNTP client capable of operating in multicast mode. | |
| 1.3.6.1.4.1.5624.1.2.38.2.1.4 | GroupetsysSntpClientBroadcastGroup | current | A collection of objects providing control and statistics for a SNTP client capable of operating in broadcast mode. | |
| 1.3.6.1.4.1.5624.1.2.38.2.1.5 | GroupetsysSntpClientAnycastGroup | current | A collection of objects providing control and statistics for a SNTP client capable of operating in anycast mode. | |
| 1.3.6.1.4.1.5624.1.2.38.2.2 | NodeetsysSntpClientCompliances | |||
| 1.3.6.1.4.1.5624.1.2.38.2.2.1 | ComplianceetsysSntpClientCompliance | current | The compliance statement for devices that support etsysSntpClientMIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SntpClientOperModes | BITS { disabled(0), unicast(1), multicast(2), broadcast(3), anycast(4) } | current | A SNTP client may operate in one of several modes. disabled - SNTP is not operational. No SNTP requests are sent from the device nor are any received SNTP messages processed. unicast - SNTP operates in a point-to-point … |
| SntpClientUpdateStatus | INTEGER { other(1), success(2), requestTimedOut(3), badDateEncoded(4), versionNotSupported(5), serverUnsychronized(6) } | current | SNTP client status values for directed SNTP requests and processing of unsolicited SNTP messages. These values are appropriate for all operational modes. other - None of the following enumeration values. success - The S… |