EQLGROUP-MIB
356 objects
Equallogic Inc. group information Copyright (c) 2002-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
Imported Objects
| EQUALLOGIC-SMI | equalLogic |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowPointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.1 | IdentityeqlgroupModule | Equallogic Inc. group information Copyright (c) 2002-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used ex… | ||
| 1.3.6.1.4.1.12740.1.1 | NodeeqlgroupObjects | |||
| 1.3.6.1.4.1.12740.1.1.1 | TableeqlStorageGroupTable | not-accessible | current | EqualLogic-Persistent Storage Group Table |
| 1.3.6.1.4.1.12740.1.1.1.1 | RoweqlStorageGroupEntry | not-accessible | current | An entry (row) containing storage group information. |
| 1.3.6.1.4.1.12740.1.1.1.1.1 | ColumneqlGroupId | not-accessible | current | This index uniquely identifies the group. This index should always be 1. |
| 1.3.6.1.4.1.12740.1.1.1.1.2 | ColumneqlGroupIsSingleSubnet | read-write | current | This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is single-subnet. |
| 1.3.6.1.4.1.12740.1.1.1.1.3 | ColumneqlGroupDefaultGatewayIpAddress | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.1.1.1.1.4 | ColumneqlGroupDefaultMask | read-write | current | This field is deprecated. |
| 1.3.6.1.4.1.12740.1.1.1.1.5 | ColumneqlGroupDefaultRoutingProtocol | read-write | current | This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and OFPS. The default value is none. |
| 1.3.6.1.4.1.12740.1.1.1.1.6 | ColumneqlGroupIsStorageOptimization | read-write | current | This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The default is capacity. |
| 1.3.6.1.4.1.12740.1.1.1.1.7 | ColumneqlGroupDiskAddWaitTime | read-write | current | This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay allows for multiple drives to b… |
| 1.3.6.1.4.1.12740.1.1.1.1.8 | ColumneqlGroupDefaultLanguage | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.1.1.1.1.9 | ColumneqlGroupDefaultSnapshotSize | read-write | current | This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be overriden on a per volume basis.… |
| 1.3.6.1.4.1.12740.1.1.1.1.10 | ColumneqlGroupDefaultSnapshotWarningLevel | read-write | current | This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhausted. The default is 20%. It ca… |
| 1.3.6.1.4.1.12740.1.1.1.1.11 | ColumneqlGroupDefaultSnapshotDeletePolicy | read-write | current | This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapShot. |
| 1.3.6.1.4.1.12740.1.1.1.1.13 | ColumneqlGroupTimeZone | read-write | current | The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu, AST (GMT-09:00) Alaskan Standard Time: America… |
| 1.3.6.1.4.1.12740.1.1.1.1.14 | ColumneqlGroupLogLevel | read-write | current | This field specifies the loglevel for the group. The log level determines which messages are written to the console. The following levels are supported. The va… |
| 1.3.6.1.4.1.12740.1.1.1.1.15 | ColumneqlGroupDescription | read-write | current | This field contains a use supplied description for the group. There is no default. |
| 1.3.6.1.4.1.12740.1.1.1.1.16 | ColumneqlGroupIscsiNamePrefix | read-write | current | This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the… |
| 1.3.6.1.4.1.12740.1.1.1.1.17 | ColumneqlGroupDefaultAliasToVolumeName | read-write | current | This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume basis. The default is to set th… |
| 1.3.6.1.4.1.12740.1.1.1.1.18 | ColumneqlGroupEmailSrcDomain | read-write | current | This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equallogic.com . |
| 1.3.6.1.4.1.12740.1.1.1.1.19 | ColumneqlGroupName | read-write | current | This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Group Name. |
| 1.3.6.1.4.1.12740.1.1.1.1.20 | ColumneqlGroupIpAddr | read-write | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.1.1.21 | ColumneqlGroupEnableWebAccessSSL | read-write | current | This field specifies whether or not to allow web access to the group using https. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.22 | ColumneqlGroupEnableWebAccessUnsecure | read-write | current | This field specifies whether or not to allow web access to the group using http. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.23 | ColumneqlGroupEnableCliAccessSSH | read-write | current | This field specifies whether or not to allow ssh access to the group. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.24 | ColumneqlGroupEnableCliAccessUnsecure | read-write | current | This field specifies whether or not to allow telnet access to the group. The default is FALSE. |
| 1.3.6.1.4.1.12740.1.1.1.1.25 | ColumneqlGroupEnableEmailNotifications | read-write | current | This field is used to specify whether to notify administrators on alarms via email. The default is FALSE. |
| 1.3.6.1.4.1.12740.1.1.1.1.26 | ColumneqlGroupEnableSNMPTraps | read-write | current | This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE. |
| 1.3.6.1.4.1.12740.1.1.1.1.27 | ColumneqlGroupEnableSyslog | read-write | current | This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE. |
| 1.3.6.1.4.1.12740.1.1.1.1.28 | ColumneqlGroupEmailPriorityMask | read-write | current | This field is used to configure the type of events to be sent in email notifications. The following type of events are supported. info(4), warning(8), error(16… |
| 1.3.6.1.4.1.12740.1.1.1.1.29 | ColumneqlGroupSNMPPriorityMask | read-write | deprecated | This field is currently not being used. |
| 1.3.6.1.4.1.12740.1.1.1.1.30 | ColumneqlGroupSysLogPriorityMask | read-write | current | This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supported. info(4), warning(8), error(1… |
| 1.3.6.1.4.1.12740.1.1.1.1.31 | ColumneqlGroupDefaultSite | read-write | current | This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of … |
| 1.3.6.1.4.1.12740.1.1.1.1.32 | ColumneqlGroupPasswd1 | read-create | current | An octet string containing the password to authenticate members joining the group. If written, it changes the password for the account. If read, it returns a z… |
| 1.3.6.1.4.1.12740.1.1.1.1.33 | ColumneqlGroupPasswd2 | not-accessible | current | This field is deprecated. |
| 1.3.6.1.4.1.12740.1.1.1.1.34 | ColumneqlGroupRowStatus | read-write | current | Rowstatus |
| 1.3.6.1.4.1.12740.1.1.1.1.35 | ColumneqlGroupObjectReuseScrub | read-only | deprecated | If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object. This field is dep… |
| 1.3.6.1.4.1.12740.1.1.1.1.36 | ColumneqlGroupEnableSSH | read-write | deprecated | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.1.1.37 | ColumneqlGroupEnableTelnet | read-write | deprecated | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.1.1.38 | ColumneqlGroupEnableFTP | read-write | current | This field specifies whether or not to allow ftp access to the group. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.39 | ColumneqlGroupEmailSrcUserName | read-write | current | This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic.com . |
| 1.3.6.1.4.1.12740.1.1.1.1.40 | ColumneqlGroupSyslogFacility | read-write | current | This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog. |
| 1.3.6.1.4.1.12740.1.1.1.1.41 | ColumneqlGroupEnableCLB | read-write | current | This field specifies whether or not to turn on Connection Load balancer. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.42 | ColumneqlGroupEnableVolBal | read-write | current | This field specifies whether or not to turn on volume balancing. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.43 | ColumneqlGroupDiscoveryFilter | read-write | current | If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default is FALSE. |
| 1.3.6.1.4.1.12740.1.1.1.1.44 | ColumneqlGroupEmailSupportContact | read-create | current | This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field will enable each member to send… |
| 1.3.6.1.4.1.12740.1.1.1.1.45 | ColumneqlGroupReplicationWindowSize | read-create | current | This field specifies the receiving window size of the tcp connection established to secondary site during replication data transfer. Minimum value is 72KB.Maxi… |
| 1.3.6.1.4.1.12740.1.1.1.1.46 | ColumneqlGroupConfigurationFlags | read-create | current | This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0). and the default value will alw… |
| 1.3.6.1.4.1.12740.1.1.1.1.47 | ColumneqlGroupISCSIPortalGrpTag | read-only | current | A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI Target Portal Group ID. This v… |
| 1.3.6.1.4.1.12740.1.1.1.1.48 | ColumneqlGroupMaxConcurrentReplicas | read-write | current | This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the maximum value is 16, and the defaul… |
| 1.3.6.1.4.1.12740.1.1.1.1.49 | ColumneqlGroupDefaultThinWarn | read-write | current | The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes. |
| 1.3.6.1.4.1.12740.1.1.1.1.50 | ColumneqlGroupDefaultThinMaxGrow | read-write | current | The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes. |
| 1.3.6.1.4.1.12740.1.1.1.1.51 | ColumneqlGroupDefaultMgmtGatewayIpAddressType | read-write | current | This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traf… |
| 1.3.6.1.4.1.12740.1.1.1.1.52 | ColumneqlGroupDefaultMgmtGatewayIpAddress | read-write | current | This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traf… |
| 1.3.6.1.4.1.12740.1.1.1.1.53 | ColumneqlGroupInet6AddrType | read-write | current | This field specifies the type of the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. |
| 1.3.6.1.4.1.12740.1.1.1.1.54 | ColumneqlGroupInet6Addr | read-write | current | This field specifies the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. There is no defaul… |
| 1.3.6.1.4.1.12740.1.1.1.1.55 | ColumneqlGroupInetAddrType | read-write | current | This field specifies the type of the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. |
| 1.3.6.1.4.1.12740.1.1.1.1.56 | ColumneqlGroupInetAddr | read-write | current | This field specifies the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. There is no defaul… |
| 1.3.6.1.4.1.12740.1.1.1.1.57 | ColumneqlGroupSupportSlowSwitch | read-write | current | This field is used to indicate the slow switch support for the group. |
| 1.3.6.1.4.1.12740.1.1.1.1.58 | ColumneqlGroupProfileIndex | read-only | current | This field represents the profile identifier. |
| 1.3.6.1.4.1.12740.1.1.1.1.59 | ColumneqlGroupEnableSSHProtocolV1 | read-write | current | This field specifies whether or not the SSH service should support the V1 Protocol. The default is TRUE. |
| 1.3.6.1.4.1.12740.1.1.1.1.60 | ColumneqlGroupEnableStandbyButton | read-write | current | This field specifies if the standby button on the Pirates/Porfidio enclosures will be enabled/disabled. The default is FALSE. |
| 1.3.6.1.4.1.12740.1.1.1.1.61 | ColumneqlGroupLDAPLoginAuthEnable | read-write | current | This field enables LDAP login authentication. |
| 1.3.6.1.4.1.12740.1.1.1.1.62 | ColumneqlGroupApplianceDiscovery | read-write | current | |
| 1.3.6.1.4.1.12740.1.1.1.1.63 | ColumneqlGroupDefaultDcbVlanId | read-write | current | Default VLAN ID for DCB control packets on interfaces. |
| 1.3.6.1.4.1.12740.1.1.1.1.64 | ColumneqlGroupThermalShutdownOverride | read-write | current | This field specifies whether thermal shutdownn override is enabled or disabled. |
| 1.3.6.1.4.1.12740.1.1.1.1.65 | ColumneqlGroupEnableLegacyCryptos | read-write | current | This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH serv… |
| 1.3.6.1.4.1.12740.1.1.1.1.66 | ColumneqlGroupMaxReplSegments | read-write | current | This field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum… |
| 1.3.6.1.4.1.12740.1.1.1.1.67 | ColumneqlGroupEnableVolumeRecovery | read-write | current | This field specifies whether or not the recoverable volume feature is enabled. The default value is enabled. |
| 1.3.6.1.4.1.12740.1.1.1.1.68 | ColumneqlGroupSessionIdleTimeout | read-write | current | This is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minim… |
| 1.3.6.1.4.1.12740.1.1.1.1.69 | ColumneqlGroupSessionIdleTimeoutEnable | read-write | current | Enable/disable the idle session timeout feature. The default is disabled. |
| 1.3.6.1.4.1.12740.1.1.1.1.70 | ColumneqlGroupSessionBannerEnable | read-write | current | Enable/disable the session banner feature. The default is disabled. |
| 1.3.6.1.4.1.12740.1.1.1.1.71 | ColumneqlGroupDefaultVolSnapshotBorrowEnabled | read-write | current | This field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group. |
| 1.3.6.1.4.1.12740.1.1.1.1.72 | ColumneqlGroupRecoveryLifeTimeEnable | read-write | current | This field enables or disables the lifetime that a deleted volume can remain in the recovery bin. When enabled, a volume will be permanently deleted after the … |
| 1.3.6.1.4.1.12740.1.1.1.1.73 | ColumneqlGroupRecoveryLifeTime | read-write | current | This field defines the amount of time (in seconds) that a deleted volume can remain in the recovery bin before being permanently deleted by the system. The def… |
| 1.3.6.1.4.1.12740.1.1.1.1.74 | ColumneqlGroupTimeProtocol | read-write | current | This field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0). |
| 1.3.6.1.4.1.12740.1.1.1.1.75 | ColumneqlGroupRecoveryTrimmerFreq | read-write | current | This field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value i… |
| 1.3.6.1.4.1.12740.1.1.1.1.76 | ColumneqlGroupUpdateEnable | read-write | current | Enable/disable update available checking. |
| 1.3.6.1.4.1.12740.1.1.1.1.77 | ColumneqlGroupUpdateLast | read-write | current | The time of last update performed represented as the number of seconds since the epoch. |
| 1.3.6.1.4.1.12740.1.1.1.1.78 | ColumneqlGroupDefaultSectorSize | read-create | current | This field specifies, in bytes, the default volume sector size for this group. |
| 1.3.6.1.4.1.12740.1.1.1.1.80 | ColumneqlGroupCompressionScanFreq | read-write | current | This index is the last assigned index value associated with VVol Volumes. |
| 1.3.6.1.4.1.12740.1.1.1.1.81 | ColumneqlGroupRunCompressionScan | read-write | current | Enable/Disable the snapshot compression scanner. |
| 1.3.6.1.4.1.12740.1.1.1.1.82 | ColumneqlGroupMonitorReminderTimestamp | read-write | current | UTC timestamp when to display the monitoring connection reminder. 0 to display immediately. 0x7fffffff to never display. |
| 1.3.6.1.4.1.12740.1.1.2 | TableeqlStorageGroupStatusTable | not-accessible | current | EqualLogic-Dynamic Group Status Table |
| 1.3.6.1.4.1.12740.1.1.2.1 | RoweqlStorageGroupStatusEntry | not-accessible | current | An entry (row) containing Group status information. |
| 1.3.6.1.4.1.12740.1.1.2.1.1 | ColumneqlStorageGroupStatusPoolSpace | read-only | current | This field specifies the total size of the Storage Pool in MBs. |
| 1.3.6.1.4.1.12740.1.1.2.1.2 | ColumneqlStorageGroupStatusPoolSpaceUsed | read-only | current | This field specifies the total space reserved for volume data within the Storage Pool in MBs. Note that this value does not include space reserved for snapshot… |
| 1.3.6.1.4.1.12740.1.1.2.1.3 | ColumneqlStorageGroupStatusTotalMembersOnLine | read-only | current | This field specifies the number of group members which are online. |
| 1.3.6.1.4.1.12740.1.1.2.1.4 | ColumneqlStorageGroupStatusPoolSpaceReserved | read-only | current | This field specifies the total space reserved for SnapShot data within the Storage Pool in MBs. |
| 1.3.6.1.4.1.12740.1.1.2.1.5 | ColumneqlStorageGroupStatusReservedSpaceInUse | read-only | current | This field specifies the total reserved space in use by snapshots in the storage pool . This will be equal to sum of eqlMemberSnapStorage for all members. |
| 1.3.6.1.4.1.12740.1.1.2.1.6 | ColumneqlStorageGroupStatusDateAndTime | read-write | current | This field specifies the current time in group represented as number of seconds since epoch. |
| 1.3.6.1.4.1.12740.1.1.2.1.7 | ColumneqlStorageGroupStatusSnapshotsInUse | read-only | current | This field specifies the total number of snapshots within the group that currently have active iSCSI connections. |
| 1.3.6.1.4.1.12740.1.1.2.1.8 | ColumneqlStorageGroupStatusVolumesInUse | read-only | current | This field specifies the total number of snapshotsvolumes within the group that currently have active iSCSI connections. |
| 1.3.6.1.4.1.12740.1.1.2.1.9 | ColumneqlStorageGroupStatusSnapshotsOnline | read-only | current | This field specifies the total number of snapshots available for iSCSI connections. |
| 1.3.6.1.4.1.12740.1.1.2.1.10 | ColumneqlStorageGroupStatusVolumesOnline | read-only | current | This field specifies the total number of volumes available for iSCSI connections. |
| 1.3.6.1.4.1.12740.1.1.2.1.11 | ColumneqlStorageGroupStatusSnapshotCount | read-only | current | This field specifies the total number of snapshots in this group. |
| 1.3.6.1.4.1.12740.1.1.2.1.12 | ColumneqlStorageGroupStatusVolumeCount | read-only | current | This field specifies the total number of volumes in this group. |
| 1.3.6.1.4.1.12740.1.1.2.1.13 | ColumneqlStorageGroupStatusMemberCount | read-only | current | This field specifies the total number of members in this group irrelevant of current member state. |
| 1.3.6.1.4.1.12740.1.1.2.1.14 | ColumneqlStorageGroupStatusMembersInUse | read-only | current | This field specifies the total number of online+offline members in this group. |
| 1.3.6.1.4.1.12740.1.1.2.1.15 | ColumneqlStorageGroupStatusFreeSpace | read-only | current | This field specifies the total free space of the Storage Pool in Mega Bytes. |
| 1.3.6.1.4.1.12740.1.1.2.1.16 | ColumneqlStorageGroupStatusPoolSpaceDelegated | read-only | current | This field specifies the amount of free space of the Storage Pool which has been partitioned for use by external services such as remote replication. This spac… |
| 1.3.6.1.4.1.12740.1.1.2.1.17 | ColumneqlStorageGroupStatusDelegatedUsedSpace | read-only | current | This field specifies the amount of space used by external services such as remote replication. This sum represents total space used by all of the entries in th… |
| 1.3.6.1.4.1.12740.1.1.2.1.18 | ColumneqlStorageGroupStatusReplReserveSpace | read-only | current | This sum represents total space reserved for all volumes for replication purposes. |
| 1.3.6.1.4.1.12740.1.1.2.1.19 | ColumneqlStorageGroupStatusReplReserveInUse | read-only | current | This sum represents total space in use for all volumes for replication purposes. This value will be equal to sum of eqlMemberReplStorage for all members. |
| 1.3.6.1.4.1.12740.1.1.2.1.20 | ColumneqlStorageGroupStatusVolumeSpaceSubscribed | read-only | current | This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a re… |
| 1.3.6.1.4.1.12740.1.1.2.1.21 | ColumneqlStorageGroupStatusVolumeSpaceAllocated | read-only | current | The value of this object represents the sum of actual materialized pages for all volumes in the group. |
| 1.3.6.1.4.1.12740.1.1.2.1.22 | ColumneqlStorageGroupStatusFailbackSpace | read-only | current | This field represents the amount of space consumed by fail-back replicasets in this storage group. |
| 1.3.6.1.4.1.12740.1.1.2.1.23 | ColumneqlStorageGroupStatusThinProvFreeSpace | read-only | current | This field represents the amount of space available for Thin Provisioned Volumes in this storage group. |
| 1.3.6.1.4.1.12740.1.1.2.1.24 | ColumneqlStorageGroupStatusConnectionCount | read-only | current | This field gives the number of iSCSI connections that are currently connected to volumes in this group. |
| 1.3.6.1.4.1.12740.1.1.2.1.25 | ColumneqlStorageGroupStatusSnapReserveSpaceFree | read-only | current | This represents the total space still available for Snapshot usage. |
| 1.3.6.1.4.1.12740.1.1.2.1.26 | ColumneqlStorageGroupStatusReplReserveSpaceFree | read-only | current | This represents the total space still available for Replica Snapshot usage. |
| 1.3.6.1.4.1.12740.1.1.2.1.27 | ColumneqlStorageGroupStatusGroupId | read-only | current | This represents an ID uniquely representing a group. |
| 1.3.6.1.4.1.12740.1.1.2.1.28 | ColumneqlStorageGroupStatusVirtualVolumeCount | read-only | current | This field specifies the total number of volumes in this group, adjusted to remove volumes not typically visible such as synchronous replication standbys. |
| 1.3.6.1.4.1.12740.1.1.2.1.29 | ColumneqlStorageGroupStatusVirtualVolumesOnline | read-only | current | This field specifies the total number of volumes available for iSCSI connections, excluding synchronous replication standbys. |
| 1.3.6.1.4.1.12740.1.1.2.1.30 | ColumneqlStorageGroupStatusVirtualVolumesInUse | read-only | current | This field specifies the total number of volumes within the group that currently have active iSCSI connections excluding synchronous replication standbys. |
| 1.3.6.1.4.1.12740.1.1.2.1.31 | ColumneqlStorageGroupStatusVirtualVolumeSpaceSubscribed | read-only | current | This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a re… |
| 1.3.6.1.4.1.12740.1.1.2.1.32 | ColumneqlStorageGroupStatsTotalSpaceBorrowing | read-only | current | This field specifies the total amount of borrowing against other volume's free snapshot reserve and pool free space. This includes snapshots and recoverable vo… |
| 1.3.6.1.4.1.12740.1.1.2.1.34 | ColumneqlStorageGroupStatusStorageContainerCount | read-only | current | This field specifies the total number of storage containers within the group. |
| 1.3.6.1.4.1.12740.1.1.2.1.35 | ColumneqlStorageGroupStatusStorageContainerVolumeCount | read-only | current | This field specifies the total number of volume resources that are being consumed within all storage containers. |
| 1.3.6.1.4.1.12740.1.1.2.1.36 | ColumneqlStorageGroupStatusStorageContainerSnapCount | read-only | current | This field specifies the total number of snapshot resources that are being consumed within all storage containers. |
| 1.3.6.1.4.1.12740.1.1.2.1.37 | ColumneqlStorageGroupStatusStorageContainerVolumesOnline | read-only | current | This field specifies the total number of online volume resources that are being consumed within all storage containers. |
| 1.3.6.1.4.1.12740.1.1.2.1.38 | ColumneqlStorageGroupStatusStorageContainerSpaceReserved | read-only | current | This field specifies the total amount of storage that is being consumed within all storage containers. |
| 1.3.6.1.4.1.12740.1.1.2.1.39 | ColumneqlStorageGroupStatusCompressedSpaceUsed | read-only | current | This field specifies the total amount of space in MB that is currently utilized for compressed pages. This is a dynamic value and cannot be set. |
| 1.3.6.1.4.1.12740.1.1.2.1.40 | ColumneqlStorageGroupStatusVirtualSpaceSize | read-only | current | This field specifies the total amount of space in MB that would be utilized by compressed pages if there was no compression. |
| 1.3.6.1.4.1.12740.1.1.2.1.41 | ColumneqlStorageGroupStatusReplicationSnapCount | read-only | current | This field specifies the total number of snapshot resources that are being consumed for replication. This includes inbound replicas, and temporary snapshots us… |
| 1.3.6.1.4.1.12740.1.1.2.1.42 | ColumneqlStorageGroupStatusStorageContainerVolumesBound | read-only | current | This field specifies the total number of bound volume across all storage containers. |
| 1.3.6.1.4.1.12740.1.1.3 | TableeqlStorageGroupSiteTable | not-accessible | current | EqualLogic-Persistent Storage Group Site Table |
| 1.3.6.1.4.1.12740.1.1.3.1 | RoweqlStorageGroupSiteEntry | not-accessible | current | An entry (row) containing storage group site information. |
| 1.3.6.1.4.1.12740.1.1.3.1.1 | ColumneqlGroupSiteIndex | not-accessible | current | This field specifies the unique index used to identify a site. |
| 1.3.6.1.4.1.12740.1.1.3.1.2 | ColumneqlGroupSiteName | read-create | current | This field specifies the name of the site default site for the group. |
| 1.3.6.1.4.1.12740.1.1.3.1.3 | ColumneqlGroupSiteDescription | read-create | current | This field contains a description of the site. For example the phsyical address of the site. There is no default. |
| 1.3.6.1.4.1.12740.1.1.3.1.4 | ColumneqlGroupSiteContactEmail | read-create | current | This field specifies the email address of the Administrators responsible for this site. |
| 1.3.6.1.4.1.12740.1.1.3.1.5 | ColumneqlGroupSiteContactPhone | read-create | current | This field specifies the phone number of the Administrator responsible for this site. |
| 1.3.6.1.4.1.12740.1.1.3.1.6 | ColumneqlGroupSiteContactMobile | read-create | current | This field specifies the cell phone number of the Administrator responsible for this site. |
| 1.3.6.1.4.1.12740.1.1.3.1.7 | ColumneqlGroupSiteRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.12740.1.1.4 | TableeqlStorageGroupDnsServerTable | not-accessible | current | EqualLogic-Persistent Storage Group DNS Server Table TimeoutAll:600 |
| 1.3.6.1.4.1.12740.1.1.4.1 | RoweqlStorageGroupDnsServerEntry | not-accessible | current | An entry (row) containing group dns server information. |
| 1.3.6.1.4.1.12740.1.1.4.1.1 | ColumneqlGroupDnsServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the DNS server entry. |
| 1.3.6.1.4.1.12740.1.1.4.1.2 | ColumneqlGroupDnsServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.4.1.3 | ColumneqlGroupDnsServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.4.1.4 | ColumneqlGroupDnsServerInetAddressType | read-create | current | This field contains the IP address type for the DNS server. |
| 1.3.6.1.4.1.12740.1.1.4.1.5 | ColumneqlGroupDnsServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the DNS server. |
| 1.3.6.1.4.1.12740.1.1.4.1.6 | ColumneqlGroupDnsServerConfigState | read-create | current | This field denotes the transaction state of the eqlStorageGroupDnsServerTable. |
| 1.3.6.1.4.1.12740.1.1.5 | TableeqlStorageGroupNtpServerTable | not-accessible | current | EqualLogic-Persistent Storage Group NTP Server Table |
| 1.3.6.1.4.1.12740.1.1.5.1 | RoweqlStorageGroupNtpServerEntry | not-accessible | current | An entry (row) containing group ntp server information. |
| 1.3.6.1.4.1.12740.1.1.5.1.1 | ColumneqlGroupNtpServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the NTP server entry. |
| 1.3.6.1.4.1.12740.1.1.5.1.2 | ColumneqlGroupNtpServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.5.1.3 | ColumneqlGroupNtpServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.5.1.4 | ColumneqlGroupNtpServerPort | read-write | current | The listening port number of the ntp server.Default value implies well known ntp port number ( 123 ) assigned by the IANA. |
| 1.3.6.1.4.1.12740.1.1.5.1.5 | ColumneqlGroupNtpServerInetAddressType | read-create | current | This field contains the IP address type for the NTP server. |
| 1.3.6.1.4.1.12740.1.1.5.1.6 | ColumneqlGroupNtpServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the NTP server. |
| 1.3.6.1.4.1.12740.1.1.6 | TableeqlStorageGroupChapServerTable | not-accessible | current | EqualLogic-Persistent Storage Group Chap Server Table |
| 1.3.6.1.4.1.12740.1.1.6.1 | RoweqlStorageGroupChapServerEntry | not-accessible | current | An entry (row) containing storage group chap server information. |
| 1.3.6.1.4.1.12740.1.1.6.1.1 | ColumneqlGroupChapServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the CHAP server entry. |
| 1.3.6.1.4.1.12740.1.1.6.1.2 | ColumneqlGroupChapServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.6.1.3 | ColumneqlGroupChapServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.6.1.4 | ColumneqlGroupChapServerPort | read-create | current | The listening port number of chap server at the specified ipaddress. The default value of zero implies that the authentication request will be forwarded to the… |
| 1.3.6.1.4.1.12740.1.1.6.1.5 | ColumneqlGroupChapServerRADIUSSecret | read-write | current | This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read. |
| 1.3.6.1.4.1.12740.1.1.6.1.6 | ColumneqlGroupChapServerInetAddressType | read-create | current | This field contains the IP address type for the CHAP server. |
| 1.3.6.1.4.1.12740.1.1.6.1.7 | ColumneqlGroupChapServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the CHAP server. |
| 1.3.6.1.4.1.12740.1.1.7 | TableeqlStorageGroupSMTPServerTable | not-accessible | current | EqualLogic-Persistent Storage Group SMTP Server Table |
| 1.3.6.1.4.1.12740.1.1.7.1 | RoweqlStorageGroupSMTPServerEntry | not-accessible | current | An entry (row) containing group smtp sever information. |
| 1.3.6.1.4.1.12740.1.1.7.1.1 | ColumneqlGroupSMTPServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the SMTP server entry. |
| 1.3.6.1.4.1.12740.1.1.7.1.2 | ColumneqlGroupSMTPServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.7.1.3 | ColumneqlGroupSMTPServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.7.1.4 | ColumneqlGroupSMTPServerPort | read-create | current | The listening port number of the SMTP server. The default value of zero implies that the server is listening on wellknown port number ( 25 ) for SMTP asssigned… |
| 1.3.6.1.4.1.12740.1.1.7.1.5 | ColumneqlGroupSMTPServerInetAddressType | read-create | current | This field contains the IP address type for the SMTP server. |
| 1.3.6.1.4.1.12740.1.1.7.1.6 | ColumneqlGroupSMTPServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the SMTP server. |
| 1.3.6.1.4.1.12740.1.1.8 | TableeqlStorageGroupSysLogServerTable | not-accessible | current | EqualLogic-Persistent Storage Group SysLog Server Table |
| 1.3.6.1.4.1.12740.1.1.8.1 | RoweqlStorageGroupSysLogServerEntry | not-accessible | current | An entry (row) containing group syslog server info. |
| 1.3.6.1.4.1.12740.1.1.8.1.1 | ColumneqlGroupSysLogServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the syslog server entry. |
| 1.3.6.1.4.1.12740.1.1.8.1.2 | ColumneqlGroupSysLogServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.8.1.3 | ColumneqlGroupSysLogServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.8.1.4 | ColumneqlGroupSysLogServerInetAddressType | read-create | current | This field contains the IP address type for the syslog server. |
| 1.3.6.1.4.1.12740.1.1.8.1.5 | ColumneqlGroupSysLogServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the syslog server. |
| 1.3.6.1.4.1.12740.1.1.9 | TableeqlStorageGroupAlertEmailTable | not-accessible | current | EqualLogic-Persistent Storage Group Email Alert Table |
| 1.3.6.1.4.1.12740.1.1.9.1 | RoweqlStorageGroupAlertEmailEntry | not-accessible | current | An entry (row) containing group alert email info. |
| 1.3.6.1.4.1.12740.1.1.9.1.1 | ColumneqlGroupAlertEmailIndex | not-accessible | current | This field specifies an index that uniquely identifies the email user to alert. |
| 1.3.6.1.4.1.12740.1.1.9.1.2 | ColumneqlGroupAlertEmailAddress | read-create | current | This field specifies the email address of the Adminstrator targeted to recieve the email the email alerts. |
| 1.3.6.1.4.1.12740.1.1.9.1.3 | ColumneqlGroupAlertEmailRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.10 | TableeqlStorageGroupAdminAccountTable | not-accessible | current | EqualLogic-Persistent Storage Group Administration account table. This table contains a collection of administration account records. It is indexed by group id… |
| 1.3.6.1.4.1.12740.1.1.10.1 | RoweqlStorageGroupAdminAccountEntry | not-accessible | current | An entry (row) containing administration account settings. |
| 1.3.6.1.4.1.12740.1.1.10.1.1 | ColumneqlStorageGroupAdminAccountIndex | not-accessible | current | The index value that uniquely identifies the administration account record. |
| 1.3.6.1.4.1.12740.1.1.10.1.2 | ColumneqlStorageGroupAdminAccountRowStatus | read-create | current | This value is used to manage the conceptual row. |
| 1.3.6.1.4.1.12740.1.1.10.1.3 | ColumneqlStorageGroupAdminAccountName | read-create | current | EQL-SECONDARY-KEY The name of the administration account. This name must be used for user authentication. |
| 1.3.6.1.4.1.12740.1.1.10.1.4 | ColumneqlStorageGroupAdminAccountPassword | read-create | current | An octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length… |
| 1.3.6.1.4.1.12740.1.1.10.1.5 | ColumneqlStorageGroupAdminAccountDescription | read-create | current | This field contains a description of the administration account. |
| 1.3.6.1.4.1.12740.1.1.10.1.6 | ColumneqlStorageGroupAdminAccountType | read-create | current | This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only… |
| 1.3.6.1.4.1.12740.1.1.10.1.7 | ColumneqlStorageGroupAdminAccountContact | read-create | current | This field contains the full name of the owner of this administration account. |
| 1.3.6.1.4.1.12740.1.1.10.1.8 | ColumneqlStorageGroupAdminAccountEmail | read-create | current | This field specifies the email address of the owner of this administration account. |
| 1.3.6.1.4.1.12740.1.1.10.1.9 | ColumneqlStorageGroupAdminAccountPhone | read-create | current | This field specifies the phone number of the owner of this administration account. |
| 1.3.6.1.4.1.12740.1.1.10.1.10 | ColumneqlStorageGroupAdminAccountMobile | read-create | current | This field specifies the cell phone number of the owner of this administration account. |
| 1.3.6.1.4.1.12740.1.1.10.1.11 | ColumneqlStorageGroupAdminAccountStatus | read-create | current | This field represents the administration status of the account. Disabling the account will prevent the user from logging into CLI and GUI. Currently logged-in … |
| 1.3.6.1.4.1.12740.1.1.10.1.12 | ColumneqlStorageGroupAdminAccountCliFlags | read-create | current | This field specifies the set of configuration flags used by the CLI. These flags allow the administrator to save CLI configuration settings between the CLI ses… |
| 1.3.6.1.4.1.12740.1.1.10.1.13 | ColumneqlStorageGroupAdminAccountGuiFlags | read-create | current | This field specifies the set of configuration flags used by the GUI. These flags allow the administrator to save GUI configuration settings between the GUI ses… |
| 1.3.6.1.4.1.12740.1.1.10.1.14 | ColumneqlStorageGroupAdminAccountPollInterval | read-create | current | The value of this field specifies how often the group configuration data must be repolled by the GUI. This value is expressed in seconds. The minimum is 5 seco… |
| 1.3.6.1.4.1.12740.1.1.10.1.15 | ColumneqlStorageGroupAdminAccountAuthType | read-create | current | This field represents the type of authentication for the administrator. Note that RADIUS/LDAP type users will only appear in the table after a successful login. |
| 1.3.6.1.4.1.12740.1.1.10.1.16 | ColumneqlStorageGroupAdminAccountRecentLogin | read-only | current | This field represents a timestamp of the most recent time this admin account has logged in. Currently only applies to radius auth type users. |
| 1.3.6.1.4.1.12740.1.1.10.1.17 | ColumneqlStorageGroupAdminAccountClass | read-only | current | This field contains the contents of the class attribute received in the RADIUS Access-Request and must be reflected in the RADIUS Accounting-Request if account… |
| 1.3.6.1.4.1.12740.1.1.10.1.18 | ColumneqlStorageGroupAdminAccountPrivilege | read-create | current | This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designat… |
| 1.3.6.1.4.1.12740.1.1.10.1.19 | ColumneqlStorageGroupAdminAccountSnmpKey | read-create | current | This field contain part of the SNMP key for this account. |
| 1.3.6.1.4.1.12740.1.1.10.1.20 | ColumneqlStorageGroupAdminAccountSnmpKey2 | read-create | current | This field contain part of the SNMP second key for this account. |
| 1.3.6.1.4.1.12740.1.1.10.1.21 | ColumneqlStorageGroupAdminAccountCHAPPassword | read-create | current | An octet string containing the (cleartext) password for this account. If written, it changes the password for the account. If read, it returns a zero-length st… |
| 1.3.6.1.4.1.12740.1.1.10.1.22 | ColumneqlStorageGroupAdminAccountKey | read-only | current | A value to uniquely identify this account. The MIB attribute eqliscsiVolumeAdminAccountKey uses this value to associate a volume with an account. No two accoun… |
| 1.3.6.1.4.1.12740.1.1.10.1.23 | ColumneqlStorageGroupAdminAccountAdGroupName | read-create | current | The name of the Active Directory group, valid only when auth type is LDAP. Same as cn attribute of the AD group. |
| 1.3.6.1.4.1.12740.1.1.10.1.24 | ColumneqlStorageGroupAdminAccountSNMPPrivProt | read-create | current | An enum field used by the Agent to determine which privacy protocol is used to encrypt external SNMP messages for this user. |
| 1.3.6.1.4.1.12740.1.1.11 | TableeqlStorageGroupiSNSServerTable | not-accessible | current | EqualLogic-Persistent Storage Group iSNS Server Table |
| 1.3.6.1.4.1.12740.1.1.11.1 | RoweqlStorageGroupiSNSServerEntry | not-accessible | current | An entry (row) containing group iSNS server information. |
| 1.3.6.1.4.1.12740.1.1.11.1.1 | ColumneqlGroupiSNSServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the iSNS server entry. |
| 1.3.6.1.4.1.12740.1.1.11.1.2 | ColumneqlGroupiSNSServerRowStatus | read-create | current | Used to manage conceptual row. |
| 1.3.6.1.4.1.12740.1.1.11.1.3 | ColumneqlGroupiSNSServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.11.1.4 | ColumneqlGroupiSNSServerPort | read-write | current | Indicates the port the iSNS server is accepting iSNSP messages on, generally the iSNS well known port.The well known port for iSNSP is 3205. The default value … |
| 1.3.6.1.4.1.12740.1.1.11.1.5 | ColumneqlGroupiSNSServerInetAddressType | read-create | current | This field contains the IP address type for the iSNS server. |
| 1.3.6.1.4.1.12740.1.1.11.1.6 | ColumneqlGroupiSNSServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the iSNS server. |
| 1.3.6.1.4.1.12740.1.1.12 | TableeqlGroupCompatibilityTable | not-accessible | current | EqualLogic-Dynamic Group Compatibility Table |
| 1.3.6.1.4.1.12740.1.1.12.1 | RoweqlGroupCompatibilityEntry | not-accessible | current | An entry (row) containing group compatibility information. |
| 1.3.6.1.4.1.12740.1.1.12.1.1 | ColumneqlGroupCurrentCompLevel | read-only | current | This field represents the current compatibility level of the group. |
| 1.3.6.1.4.1.12740.1.1.13 | TableeqlStorageGroupCollectionTable | not-accessible | current | EqualLogic-Dynamic Group Collection Table. This table maintains overall number of volume collections and snap collection in a group. |
| 1.3.6.1.4.1.12740.1.1.13.1 | RoweqlStorageGroupCollectionEntry | not-accessible | current | An entry (row) containing volume/snap collections information in a group. |
| 1.3.6.1.4.1.12740.1.1.13.1.1 | ColumneqlGrpNoofVolCollections | read-only | current | This field specifies the total number of volume collections in the group ie number of rows in eqliscsiVolCollectionTable. |
| 1.3.6.1.4.1.12740.1.1.13.1.2 | ColumneqlGrpNoofSnapCollections | read-only | current | This field specifies the total number of snapshot collections in the group ie number of rows in eqliscsiSnapCollectionTable. |
| 1.3.6.1.4.1.12740.1.1.13.1.3 | ColumneqlGrpNoofOrphanSnapCollections | read-only | current | This field specifies the total number of snapshot collections in the group that dont have a corresponding volume set ie number of rows in eqliscsiSnapCollectio… |
| 1.3.6.1.4.1.12740.1.1.14 | TableeqlRADIUSTable | not-accessible | current | EqualLogic-Persistent Group RADIUS Configuration Table. This table maintains the configuration for the RADIUS implementation. |
| 1.3.6.1.4.1.12740.1.1.14.1 | RoweqlRADIUSEntry | not-accessible | current | An entry (row) containing RADIUS information in a group. |
| 1.3.6.1.4.1.12740.1.1.14.1.1 | ColumneqlRADIUSSecret | read-write | current | This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read. |
| 1.3.6.1.4.1.12740.1.1.14.1.2 | ColumneqlRADIUSLoginAuthEnable | read-write | current | This field enables RADIUS login authentication. |
| 1.3.6.1.4.1.12740.1.1.14.1.3 | ColumneqlRADIUSAuthRecvTimeout | read-write | current | This field configures the RADIUS authentication message receive timeout in seconds. |
| 1.3.6.1.4.1.12740.1.1.14.1.4 | ColumneqlRADIUSAuthMaxRetries | read-write | current | This field configures the number of RADIUS authentication retries. |
| 1.3.6.1.4.1.12740.1.1.14.1.5 | ColumneqlRADIUSLoginAcctEnable | read-write | current | This field enables RADIUS accounting for login administrators. |
| 1.3.6.1.4.1.12740.1.1.14.1.6 | ColumneqlRADIUSAcctRecvTimeout | read-write | current | This field configures the RADIUS accounting message receive timeout in seconds. |
| 1.3.6.1.4.1.12740.1.1.14.1.7 | ColumneqlRADIUSAcctMaxRetries | read-write | current | This field configures the number of RADIUS accounting retries. |
| 1.3.6.1.4.1.12740.1.1.14.1.8 | ColumneqlRADIUSiscsiAuthEnable | read-write | current | This field enables RADIUS authentication for ISCSI initiators. |
| 1.3.6.1.4.1.12740.1.1.14.1.9 | ColumneqlLocaliscsiAuthEnable | read-write | current | This field enables Local authentication for ISCSI initiators. |
| 1.3.6.1.4.1.12740.1.1.14.1.10 | ColumneqlRADIUSRequireAdminAttrEnable | read-write | current | This field enables requiring the EQL-Admin RADIUS return attribute. |
| 1.3.6.1.4.1.12740.1.1.15 | TableeqlRADIUSAcctServerTable | not-accessible | current | EqualLogic-Persistent Group RADIUS Accounting server table. |
| 1.3.6.1.4.1.12740.1.1.15.1 | RoweqlRADIUSAcctServerEntry | not-accessible | current | An entry (row) containing the configuration for a RADIUS accounting server. |
| 1.3.6.1.4.1.12740.1.1.15.1.1 | ColumneqlRADIUSAcctServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the RADIUS Accounting server entry. |
| 1.3.6.1.4.1.12740.1.1.15.1.2 | ColumneqlRADIUSAcctServerIpAddress | read-create | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.15.1.3 | ColumneqlRADIUSAcctServerPort | read-create | current | The listening port number of the RADIUS Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be for… |
| 1.3.6.1.4.1.12740.1.1.15.1.4 | ColumneqlRADIUSAcctServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.15.1.5 | ColumneqlRADIUSAcctServerSecret | read-write | current | This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read. |
| 1.3.6.1.4.1.12740.1.1.15.1.6 | ColumneqlRADIUSAcctServerInetAddressType | read-create | current | This field contains the IP address type for the RADIUS Accounting server. |
| 1.3.6.1.4.1.12740.1.1.15.1.7 | ColumneqlRADIUSAcctServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the RADIUS Accounting server. |
| 1.3.6.1.4.1.12740.1.1.16 | TableeqlUserSessionTable | not-accessible | current | EqualLogic-Dynamic user session table. |
| 1.3.6.1.4.1.12740.1.1.16.1 | RoweqlUserSessionEntry | not-accessible | current | An entry (row) containing an active user administrative session. |
| 1.3.6.1.4.1.12740.1.1.16.1.1 | ColumneqlUserSessionIndex | not-accessible | current | This field specifies an index that uniquely identifies the user session entry. |
| 1.3.6.1.4.1.12740.1.1.16.1.2 | ColumneqlUserSessionAdminAccountIndex | read-write | current | This field specifies an index that uniquely identifies a storage group admin account entry. |
| 1.3.6.1.4.1.12740.1.1.16.1.3 | ColumneqlUserSessionStart | read-write | current | The timestamp from the start of the administrative session. |
| 1.3.6.1.4.1.12740.1.1.16.1.4 | ColumneqlUserSessionProtocol | read-write | current | The incoming protocol through which the administrator is connecting to the array. |
| 1.3.6.1.4.1.12740.1.1.16.1.5 | ColumneqlUserSessionRemoteAddress | read-write | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.16.1.6 | ColumneqlUserSessionLocalAddress | read-write | current | This field is deprecated and will be unsupported in the next release. |
| 1.3.6.1.4.1.12740.1.1.16.1.7 | ColumneqlUserSessionRemoteInetAddressType | read-write | current | The remote IP address type, if applicable, from which the administrator is connecting. |
| 1.3.6.1.4.1.12740.1.1.16.1.8 | ColumneqlUserSessionRemoteInetAddress | read-write | current | The remote IP address, if applicable, from which the administrator is connecting. |
| 1.3.6.1.4.1.12740.1.1.16.1.9 | ColumneqlUserSessionLocalInetAddressType | read-write | current | The local interface IP address type, if applicable, at which the administrator is connecting. |
| 1.3.6.1.4.1.12740.1.1.16.1.10 | ColumneqlUserSessionLocalInetAddress | read-write | current | The local interface IP address, if applicable, at which the administrator is connecting. |
| 1.3.6.1.4.1.12740.1.1.17 | TableeqlRecordVersionTable | not-accessible | current | EqualLogic record version table. |
| 1.3.6.1.4.1.12740.1.1.17.1 | RoweqlRecordVersionEntry | not-accessible | current | An entry (row) containing min and max record version. |
| 1.3.6.1.4.1.12740.1.1.17.1.1 | ColumneqlRecordVersionTableType | not-accessible | current | This field identifies a specific MIB table by tableType_t (see tableTypes.h). |
| 1.3.6.1.4.1.12740.1.1.17.1.2 | ColumneqlRecordVersionMin | read-write | current | This field specifies the lowest REC_HDR::major value found in any record of this table. |
| 1.3.6.1.4.1.12740.1.1.17.1.3 | ColumneqlRecordVersionMax | read-write | current | This field specifies the current REC_HDR::major value for records of this table. |
| 1.3.6.1.4.1.12740.1.1.18 | TableeqlGroupTaskTable | not-accessible | current | EqualLogic-Persistent task table. A row in this table represents a task currently executing in the group. |
| 1.3.6.1.4.1.12740.1.1.18.1 | RoweqlGroupTaskEntry | not-accessible | current | A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will exe… |
| 1.3.6.1.4.1.12740.1.1.18.1.1 | ColumneqlGroupTaskIndex | not-accessible | current | This field specifies an index that uniquely identifies a task. |
| 1.3.6.1.4.1.12740.1.1.18.1.2 | ColumneqlGroupTaskRowStatus | read-create | current | This field is used to manage the conceptual row. |
| 1.3.6.1.4.1.12740.1.1.18.1.3 | ColumneqlGroupTaskType | read-create | current | This field represents the type of the task. |
| 1.3.6.1.4.1.12740.1.1.18.1.4 | ColumneqlGroupTaskContext | read-create | current | Context associated with the task. For ex: a volume or replicaset. |
| 1.3.6.1.4.1.12740.1.1.18.1.5 | ColumneqlGroupTaskNumSubTasks | read-create | current | Number of subtasks in this task. |
| 1.3.6.1.4.1.12740.1.1.18.1.6 | ColumneqlGroupTaskSubTaskInProgress | read-create | current | Subtask that is currently in progress for this task. |
| 1.3.6.1.4.1.12740.1.1.18.1.7 | ColumneqlGroupTaskSubtaskStatus | read-create | current | Status of currently executing subtask. |
| 1.3.6.1.4.1.12740.1.1.18.1.8 | ColumneqlGroupTaskStatus | read-create | current | set to true if user action is required for the task to proceed further. |
| 1.3.6.1.4.1.12740.1.1.18.1.9 | ColumneqlGroupTaskUserAction | read-create | current | user action on the task. |
| 1.3.6.1.4.1.12740.1.1.18.1.10 | ColumneqlGroupTaskStartTime | read-create | current | time at which this task started represented as number of seconds since epoch. |
| 1.3.6.1.4.1.12740.1.1.18.1.11 | ColumneqlGroupTaskReplication | read-create | current | If set to true, a manual replica will be created when performing replication. |
| 1.3.6.1.4.1.12740.1.1.20 | TableeqlStorageGroupProfileTable | not-accessible | current | EqualLogic-Persistent Group Profile Table |
| 1.3.6.1.4.1.12740.1.1.20.1 | RoweqlStorageGroupProfileEntry | not-accessible | current | An entry (row) containing the profile limits and configuration information. |
| 1.3.6.1.4.1.12740.1.1.20.1.1 | ColumneqlStorageGroupProfileVersion | read-only | current | This field specifies the current version of the Profile. The most significant 16 bits are the compat level, the least significant 16 bits are the profile versi… |
| 1.3.6.1.4.1.12740.1.1.20.1.2 | ColumneqlStorageGroupProfileWeight | read-only | current | This field specifies the current weight of the Profile |
| 1.3.6.1.4.1.12740.1.1.20.1.3 | ColumneqlStorageGroupProfileMaxMembers | read-only | current | This field specifies the maximum members that can exist in the group with this profile id. |
| 1.3.6.1.4.1.12740.1.1.20.1.4 | ColumneqlStorageGroupProfileMaxVolumes | read-only | current | This field specifies the maximum number of volumes in group. |
| 1.3.6.1.4.1.12740.1.1.20.1.5 | ColumneqlStorageGroupProfileMaxSnapsPerGroup | read-only | current | This field specifies the maximum number of snaps in group. |
| 1.3.6.1.4.1.12740.1.1.20.1.6 | ColumneqlStorageGroupProfileMaxSnapsPerVolume | read-only | current | This field specifies the maximum number of snaps per volume. |
| 1.3.6.1.4.1.12740.1.1.20.1.7 | ColumneqlStorageGroupProfileMaxReplicasPerVolume | read-only | current | This field specifies the maximum number of Replicas per volume. |
| 1.3.6.1.4.1.12740.1.1.20.1.8 | ColumneqlStorageGroupProfileMaxReplVolumes | read-only | current | This field specifies the maximum number of replication volumes in group. |
| 1.3.6.1.4.1.12740.1.1.20.1.9 | ColumneqlStorageGroupProfileMaxConnections | read-only | current | This field specifies the maximum number of connections allowed per pool. |
| 1.3.6.1.4.1.12740.1.1.20.1.10 | ColumneqlStorageGroupProfileMaxPartners | read-only | current | This field specifies the maximum number of partners in group. |
| 1.3.6.1.4.1.12740.1.1.20.1.11 | ColumneqlStorageGroupProfileMaxConnWarning | read-only | current | This field specifies when will warning be issued for connection limit. |
| 1.3.6.1.4.1.12740.1.1.20.1.12 | ColumneqlStorageGroupProfileMaxSyncReplVolumes | read-only | current | This field specifies the maximum number of Sync Repl volumes allowed in the group. |
| 1.3.6.1.4.1.12740.1.1.21 | TableeqlStorageGroupAdminAccountKeyTable | not-accessible | current | EqualLogic-Dynamic table converting a eqlStorageGroupAdminAccountKey to a eqlStorageGroupAdminAccountIndex. |
| 1.3.6.1.4.1.12740.1.1.21.1 | RoweqlStorageGroupAdminAccountKeyEntry | not-accessible | current | An entry (row) containing the value of the account index. |
| 1.3.6.1.4.1.12740.1.1.21.1.1 | ColumneqlStorageGroupAdminAccountIndexValue | read-only | current | The index to use to access the group admin account associated with the key specified. |
| 1.3.6.1.4.1.12740.1.1.22 | TableeqlStorageGroupChapAccountTable | not-accessible | current | EqualLogic-Persistent Storage Group CHAP account table. This table contains a collection of CHAP account records, each containing Equallogic specific CHAP acco… |
| 1.3.6.1.4.1.12740.1.1.22.1 | RoweqlStorageGroupChapAccountEntry | not-accessible | current | An entry (row) containing administration account settings. |
| 1.3.6.1.4.1.12740.1.1.22.1.1 | ColumneqlStorageGroupChapAccountIndex | not-accessible | current | The index value that uniquely identifies the CHAP account record. |
| 1.3.6.1.4.1.12740.1.1.22.1.2 | ColumneqlStorageGroupChapAccountRowStatus | read-create | current | This value is used to manage the conceptual row. |
| 1.3.6.1.4.1.12740.1.1.22.1.3 | ColumneqlStorageGroupChapAccountAdminAccountKey | read-create | current | A value to uniquely identify this administrative account that created this CHAP account. This value matches the eqlStorageGroupAdminAccountKey of the creating … |
| 1.3.6.1.4.1.12740.1.1.22.1.4 | ColumneqlStorageGroupChapAccountPublic | read-create | current | If true, the name of the associated CHAP account is viewable by all admin accounts. If false, the name of the associated CHAP account is not viewable by volume… |
| 1.3.6.1.4.1.12740.1.1.24 | TableeqlLDAPServerTable | not-accessible | current | EqualLogic-Persistent Group LDAP Accounting server table. |
| 1.3.6.1.4.1.12740.1.1.24.1 | RoweqlLDAPServerEntry | not-accessible | current | An entry (row) containing the configuration for a LDAP server. |
| 1.3.6.1.4.1.12740.1.1.24.1.1 | ColumneqlLDAPServerIndex | not-accessible | current | This field specifies an index that uniquely identifies the LDAP server entry. |
| 1.3.6.1.4.1.12740.1.1.24.1.2 | ColumneqlLDAPServerBaseDN | read-create | current | This field contains the LDAP server BASE DN used for ldapsearch queries. |
| 1.3.6.1.4.1.12740.1.1.24.1.3 | ColumneqlLDAPServerSecureProtocol | read-create | current | This field represent the security protocol between PS Group and the LDAP server. Default value is none meaning that the user credentials will be sent over the … |
| 1.3.6.1.4.1.12740.1.1.24.1.4 | ColumneqlLDAPServerInetAddressType | read-create | current | This field contains the IP address type for the LDAP Accounting server. |
| 1.3.6.1.4.1.12740.1.1.24.1.5 | ColumneqlLDAPServerInetAddress | read-create | current | This field contains the IP address, in network byte order, for the LDAP Accounting server. |
| 1.3.6.1.4.1.12740.1.1.24.1.6 | ColumneqlLDAPServerPort | read-create | current | The listening port number of the LDAP Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwa… |
| 1.3.6.1.4.1.12740.1.1.24.1.7 | ColumneqlLDAPServerAnonymousAccess | read-create | current | This field specifies whether an anonymous bind can be done, in which case the bind DN and the bind password are not needed. The default is no anonymous access. |
| 1.3.6.1.4.1.12740.1.1.24.1.8 | ColumneqlLDAPServerBindDN | read-create | current | This field contains the LDAP bind DN (username) for this client. It can be set but it returns a zero-length string upon read. |
| 1.3.6.1.4.1.12740.1.1.24.1.9 | ColumneqlLDAPServerBindPassword | read-create | current | This field contains the LDAP bind password for this client. It can be set but it returns a zero-length string upon read. |
| 1.3.6.1.4.1.12740.1.1.24.1.10 | ColumneqlLDAPServerRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.25 | TableeqlLdapLoginAccessTable | not-accessible | current | EqualLogic-Persistent Group Active directory group table. Stores the access that an AD group or account receives when logging in through an entry in this table. |
| 1.3.6.1.4.1.12740.1.1.25.1 | RoweqlLdapLoginAccessEntry | not-accessible | current | An entry (row) containing the configuration for the LDAP object access details. |
| 1.3.6.1.4.1.12740.1.1.25.1.1 | ColumneqlLdapLoginAccessName | read-create | current | The name of the LDAP object access description. For AD groups, it is the same as cn attribute of the AD group. For LDAP accounts, it is the same as the account… |
| 1.3.6.1.4.1.12740.1.1.25.1.2 | ColumneqlLdapLoginAccessType | read-create | current | This field represents the type of LDAP object that this entry grants access to. |
| 1.3.6.1.4.1.12740.1.1.25.1.3 | ColumneqlLdapLoginAccessAccountPrivilege | read-create | current | This field specifies the privilege level of the account that logs in through this LDAP object access. The default is global-admin. Global-admin grants full acc… |
| 1.3.6.1.4.1.12740.1.1.25.1.4 | ColumneqlLdapLoginAccessAccountType | read-create | current | This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only… |
| 1.3.6.1.4.1.12740.1.1.25.1.5 | ColumneqlLdapLoginAccessRowStatus | read-create | current | This field indicates the status of this entry. |
| 1.3.6.1.4.1.12740.1.1.25.1.6 | ColumneqlLdapLoginAccessAdDomainName | read-create | current | The name of the AD Domain associated with this LDAP object. Length allows for terminating null terminating character. |
| 1.3.6.1.4.1.12740.1.1.26 | TableeqlStorageGroupDnsSuffixTable | not-accessible | current | EqualLogic-Persistent Storage Group DNS Suffix Table TimeoutAll:600 |
| 1.3.6.1.4.1.12740.1.1.26.1 | RoweqlStorageGroupDnsSuffixEntry | not-accessible | current | An entry (row) containing group dns suffix information. |
| 1.3.6.1.4.1.12740.1.1.26.1.1 | ColumneqlGroupDnsSuffixIndex | not-accessible | current | This field specifies an index that uniquely identifies the DNS suffix entry. |
| 1.3.6.1.4.1.12740.1.1.26.1.2 | ColumneqlGroupDnsSuffixRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.12740.1.1.26.1.3 | ColumneqlGroupDnsSuffixString | read-create | current | This field contains a suffix string. |
| 1.3.6.1.4.1.12740.1.1.26.1.4 | ColumneqlGroupDnsSuffixConfigState | read-create | current | This field denotes the transaction state of the eqlStorageGroupDnsSuffixTable. |
| 1.3.6.1.4.1.12740.1.1.27 | TableeqlStorageGroupSnmpTable | not-accessible | current | EqualLogic-Dynamic Storage Group Snmp Table. Used solely to communicate Group Snmp params to the Appliance. |
| 1.3.6.1.4.1.12740.1.1.27.1 | RoweqlStorageGroupSnmpEntry | not-accessible | current | An entry (row) containing snmp information. |
| 1.3.6.1.4.1.12740.1.1.27.1.1 | ColumneqlStorageGroupSnmpRowStatus | read-create | current | Rowstatus |
| 1.3.6.1.4.1.12740.1.1.27.1.2 | ColumneqlStorageGroupSnmpManagersList | read-create | current | Specifies a list of SNMP managers that can receive SNMP traps. Contains Max of 5 comma separated IP addresses. |
| 1.3.6.1.4.1.12740.1.1.27.1.3 | ColumneqlStorageGroupSnmpTrapCommunity | read-create | current | Specifies the trap read-only community string. |
| 1.3.6.1.4.1.12740.1.1.28 | TableeqlGroupSessionBannerTable | not-accessible | current | EqualLogic-Persistent Storage Group Session Banner Table |
| 1.3.6.1.4.1.12740.1.1.28.1 | RoweqlGroupSessionBannerEntry | not-accessible | current | An entry (row) containing session banner information. |
| 1.3.6.1.4.1.12740.1.1.28.1.1 | ColumneqlGroupSessionBannerRowStatus | read-create | current | Rowstatus |
| 1.3.6.1.4.1.12740.1.1.28.1.2 | ColumneqlGroupSessionBannerText | read-create | current | Up to 1000 bytes of UTF-8 string to display at the beginning of any session |
| 1.3.6.1.4.1.12740.1.1.29 | TableeqlGroupSingleSignOnStatusTable | not-accessible | current | EqualLogic-Dynamic Single Sign on status table |
| 1.3.6.1.4.1.12740.1.1.29.1 | RoweqlGroupSingleSignOnStatusEntry | not-accessible | current | An entry (row) containing session Single Sign on status information. |
| 1.3.6.1.4.1.12740.1.1.29.1.1 | ColumneqlGroupSingleSignOnStatus | read-only | current | This field specifies the local status for signle sign on as maintained by the PS group It will be set to Ready if an attempt to join the AD server had succeede… |
| 1.3.6.1.4.1.12740.1.1.29.1.2 | ColumneqlGroupSingleSignOnRegGroupName | read-only | current | This field specifies the group name that was registered with the AD server |
| 1.3.6.1.4.1.12740.1.1.29.1.3 | ColumneqlGroupSingleSignOnKrbRealm | read-only | current | This field contains kerberos relam or the domain name expressed using a dot notation. This field should match the dc part of the BASE DN in the eqlLDAPServerTa… |
| 1.3.6.1.4.1.12740.1.1.30 | TableeqlNextAvailableIndexTable | not-accessible | current | EqualLogic-Dynamic Next Available Index Table This table tracks the next available index for a specified table type. |
| 1.3.6.1.4.1.12740.1.1.30.1 | RoweqlNextAvailableIndexEntry | not-accessible | current | An entry (row) which tracks an available index for the specified table type. |
| 1.3.6.1.4.1.12740.1.1.30.1.1 | ColumneqlNextAvailableIndexTableType | not-accessible | current | This field indicates the table for which this index is maintained (from tableTypes.h). |
| 1.3.6.1.4.1.12740.1.1.30.1.2 | ColumneqlNextAvailableIndexValue | read-only | current | This field maintains the last db index value used for the specified table. |
| 1.3.6.1.4.1.12740.1.1.31 | TableeqlStorageGroupSnmpReadOnlyCommunityTable | not-accessible | current | EqualLogic-Dynamic Storage Group Snmp Read Only Community Table. Used solely to manage the Group SNMP read only community string. |
| 1.3.6.1.4.1.12740.1.1.31.1 | RoweqlStorageGroupSnmpReadOnlyCommunityEntry | not-accessible | current | An entry (row) containing snmp community information. |
| 1.3.6.1.4.1.12740.1.1.31.1.1 | ColumneqlStorageGroupSnmpReadOnlyCommunity | read-create | current | Specifies SNMP read only community string. |
| 1.3.6.1.4.1.12740.1.1.32 | TableeqlEULAAcceptInfoTable | not-accessible | current | EqualLogic-Persistent EULA acceptance information table. This table contains a single record that stores information associated with the most recent EULA accep… |
| 1.3.6.1.4.1.12740.1.1.32.1 | RoweqlEULAAcceptInfoEntry | not-accessible | current | An entry (row) containing EULA acceptance information. |
| 1.3.6.1.4.1.12740.1.1.32.1.1 | ColumneqlEULAAcceptInfoFirmwareType | read-create | current | The firmware type of the accepted EULA. |
| 1.3.6.1.4.1.12740.1.1.32.1.2 | ColumneqlEULAAcceptInfoRowStatus | read-create | current | This value is used to manage the conceptual row. |
| 1.3.6.1.4.1.12740.1.1.32.1.3 | ColumneqlEULAAcceptInfoAccountName | read-create | current | The name of the administration account used to accept the EULA. |
| 1.3.6.1.4.1.12740.1.1.32.1.4 | ColumneqlEULAAcceptInfoEULAVersion | read-create | current | The version of the accepted EULA. |
| 1.3.6.1.4.1.12740.1.1.32.1.5 | ColumneqlEULAAcceptInfoTimestamp | read-create | current | The timestamp when the EULA was accepted.. |
| 1.3.6.1.4.1.12740.1.2 | NodeeqlgroupNotifications | |||
| 1.3.6.1.4.1.12740.1.3 | NodeeqlgroupConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdminAccountPrivilegeType | INTEGER { global-admin (0), pool-admin (1), pool-admin-group-read (2), volume-admin (3) } | current | This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pool… |
| AdminAccountType | INTEGER { read-write (1), read-only (2) } | current | This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-wri… |
| UTFString | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct… |