ES-MODULE-MIB
124 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.437 | Nodegrandjunction | |||
| 1.3.6.1.4.1.437.1 | Nodeproducts | |||
| 1.3.6.1.4.1.437.1.1 | NodefastLink | |||
| 1.3.6.1.4.1.437.1.1.2 | NodeseriesG2xx | |||
| 1.3.6.1.4.1.437.1.1.2.1 | NodeesModuleBasic | |||
| 1.3.6.1.4.1.437.1.1.2.1.1 | NodeesModuleBasicInfo | |||
| 1.3.6.1.4.1.437.1.1.2.1.1.1 | ScalaresModuleCapacity | read-only | mandatory | The esModuleCapacity is the number of expansion slots that are available in the unit. |
| 1.3.6.1.4.1.437.1.1.2.1.2 | NodeesModuleInfo | |||
| 1.3.6.1.4.1.437.1.1.2.1.2.1 | TableesModuleTable | not-accessible | mandatory | Table of descriptive and status information about the modules. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1 | RowesModuleEntry | not-accessible | mandatory | An entry in the table, containing information about one of the modules. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.1 | ColumnesModuleIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.2 | ColumnesModuleStatus | read-only | mandatory | Current operational status of the module. This value is the same as swPortStatus for the corresponding switched port. Possible values are: enabled : normal ope… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.3 | ColumnesModuleAdminStatus | read-write | mandatory | By explicit management action, change the port status to either enabled : normal status (transmit and receive) disabled-mgmt: port is no longer in use. This va… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.4 | ColumnesModuleDescr | read-only | mandatory | A text string which includes the full name and version identification of the module's hardware type. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.5 | ColumnesModuleID | read-only | mandatory | A text representation of the Cisco specified identifier for the installed module, or 'notPresent'. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.6 | ColumnesModuleVersion | read-only | mandatory | The Cisco specified unique identification for the module version, ranging from 1 to 254. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.7 | ColumnesModuleObjectID | read-only | mandatory | The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-f… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.8 | ColumnesModulePortCapacity | read-only | mandatory | The number of external port attachments provided by the module. |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.9 | ColumnesModuleReset | read-write | mandatory | Setting this object to reset causes the module to be forced into a reset state. The reset state is a module specific condition in which the module's packet ope… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.10 | ColumnesModuleLastStatusChange | read-only | mandatory | Contains the value of sysUpTime at the time that the value of the esModuleStatus object for this module last changed. A value of zero indicates that the group'… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.11 | ColumnesModuleCollisionPeriods | read-only | mandatory | Contains the count of times the firmware has toggled the front panel module collision LED from the off state to the on state. Successive reads of the counter m… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.12 | ColumnesModuleLinkDisplayMap | read-only | mandatory | A bit array where the presence of a particular bit indicates a lit link LED for a module port. Each octet within the value of this object specifies a set of ei… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.13 | ColumnesModuleDisabledDisplayMap | read-only | mandatory | A bit array where the presence of a particular bit indicates a lit disabled LED for a module port. Each octet within the value of this object specifies a set o… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.14 | ColumnesModuleBroadcastStormBlocked | read-only | mandatory | The current broadcast forwarding status of this module. If this module is blocked by broadcast storm control, the switch drops all broadcasts received from the… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.15 | ColumnesModuleFirmwareVersion | read-only | mandatory | This object returns the version number of the firmware stored in FLASH memory on the module. The string has the format 'v1.00' for the FDDI module. For the ATM… |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.16 | ColumnesModuleBOOTCodeVersion | read-only | mandatory | This object returns the version number of the BOOT code stored in permanent FLASH memory on the module. The string has the format 'v1.00' for the FDDI module. … |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.17 | ColumnesModuleFlashStatus | read-only | mandatory | A string of up to 80 characters indicating the status of the firmware stored in the module's FLASH memory. The string includes the firmware revision, the data … |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.18 | ColumnesModuleResetToFactoryDefaults | read-write | mandatory | Setting this object to reset(2) will cause the settings on the module to revert to factory defaults. The module will then be reset by the system. The module's … |
| 1.3.6.1.4.1.437.1.1.2.1.2.1.1.19 | ColumnesModuleSwPortIndex | read-only | mandatory | This is the value of swPortIndex object in the STANDALONE-ETHERNET-SWITCH-MIB corresponding to the module. |
| 1.3.6.1.4.1.437.1.1.2.1.3 | NodeesModulePortInfo | |||
| 1.3.6.1.4.1.437.1.1.2.1.3.1 | TableesModulePortTable | not-accessible | mandatory | Table of descriptive and status information about the individual ports in a module. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1 | RowesModulePortEntry | not-accessible | mandatory | An entry in the table, containing information about one of the repeater ports. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.1 | ColumnesModuleSlotIndex | read-only | mandatory | This is the value of esModuleIndex object of the module which this port belongs to. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.2 | ColumnesModulePortIndex | read-only | mandatory | This object identifies the port for which this entry contains information. This value is never greater than esModulePortCapacity. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.3 | ColumnesModulePortDescr | read-write | mandatory | A descriptive string of up to 60 characters used by the network administrator to name the port. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.4 | ColumnesModulePortAdminStatus | read-write | mandatory | By explicit management action, change the port status to either enabled : normal status (transmit and receive) disabled : the port neither transmits nor receiv… |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.5 | ColumnesModulePortAutoPartitionState | read-only | mandatory | Indicates whether the port is currently partitioned by the repeater's auto-partition protection. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.6 | ColumnesModulePortOperStatus | read-only | mandatory | Indicates the port's operational status. enabled : port is enabled and working notOperational : the port neither transmits nor receives suspended-not-present: … |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.7 | ColumnesModulePortLinkbeatStatus | read-only | mandatory | The port's current linkbeat status. |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.8 | ColumnesModulePortConnectorType | read-only | mandatory | The connector type for the port. It is one of other : none of the following (unknown) rj45 : common unshielded twisted pair connector bnc : thin-coax (BNC) aui… |
| 1.3.6.1.4.1.437.1.1.2.1.3.1.1.9 | ColumnesModulePortReceivePeriods | read-only | mandatory | Contains the count of times the front panel port receive activity LED has been toggled from the off state to the on state. Successive reads of this counter giv… |
| 1.3.6.1.4.1.437.1.1.2.2 | NodeesModuleSpecific | |||
| 1.3.6.1.4.1.437.1.1.2.2.1 | NodefmFDDIBasic | |||
| 1.3.6.1.4.1.437.1.1.2.2.1.1 | NodefmFDDICfgInfo | |||
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1 | TablefmCfgTable | not-accessible | mandatory | Table of configuration and status information about FDDI modules. |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1 | RowfmCfgEntry | not-accessible | mandatory | An entry in the table, containing information about one a FDDI module. |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.1 | ColumnfmCfgIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.2 | ColumnfmCfgFirmwareVersion | read-only | mandatory | This object returns the version number of the firmware stored in FLASH memory on the FDDI module. The string has the format 'v1.00'. |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.3 | ColumnfmCfgBOOTCodeVersion | read-only | mandatory | This object returns the version number of the BOOT code stored in permanent FLASH memory on the FDDI module. The string has the format 'v1.00'. |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.4 | ColumnfmCfgPOSTResult | read-only | mandatory | This object indicates the result of the FDDI module's Power On Self Test (POST). If the module passed POST, this item will return noFailure(1). |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.5 | ColumnfmCfgPOSTTest | read-only | mandatory | This object indicates the specific test that caused the POST to fail. If the module passed POST, this item will return noFailure(1). |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.6 | ColumnfmCfgPOSTLoopbackResult | read-only | mandatory | In the event that the FDDI module fails the loopback test during POST, this object will indicate which portion of the test caused the failure. If the value of … |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.7 | ColumnfmCfgFlashStatus | read-only | mandatory | A string of up to 80 characters indicating the status of the firmware stored in the FDDI module's FLASH memory. The string includes the firmware revision, the … |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.8 | ColumnfmCfgResetToFactoryDefaults | read-write | mandatory | Setting this object to reset(2) will cause the settings on the FDDI module to revert to factory defaults. The module will then be reset by the system. The modu… |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.9 | ColumnfmCfgResetModule | read-write | mandatory | Setting this object to reset(2) causes the module to be forced into a reset state. During the reset state, the module's packet operations will cease while the … |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.10 | ColumnfmCfgNovellFDDISNAPTranslation | read-write | mandatory | This object specifies the Ethernet frame type that the FDDI module will translate Novell SNAP FDDI frames into. automatic(1): the FDDI module will automaticall… |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.11 | ColumnfmCfgUnmatchedSNAPDestination | read-write | mandatory | This object specifies what the FDDI module is to do with Novell SNAP FDDI frames whose destination frame type cannot be determined. The value of this object is… |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.12 | ColumnfmCfgAuthorizationChecking | read-write | mandatory | This object controls enabling and disabling of authorization string checking by the SMT entity. When enabled, the FDDI module will use the current authorizatio… |
| 1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.13 | ColumnfmCfgAuthorizationString | read-write | mandatory | This item specifies the string to be used in the authentication of SMT requests. The length is from 0 to 32 bytes and must be a multiple of 4 bytes. This item … |
| 1.3.6.1.4.1.437.1.1.2.2.1.2 | NodefmFDDIXlateToEthInfo | |||
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1 | TablefmXlateToEthTable | not-accessible | mandatory | Table of statistics that count the number of frames successfully forwarded from the FDDI module to the switch forwarding engine. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1 | RowfmXlateToEthEntry | not-accessible | mandatory | An entry in the table, containing information about a FDDI module. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.1 | ColumnfmXlateToEthIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.2 | ColumnfmXlateToEthNovellSnapToRaw8023Frames | read-only | mandatory | This object is a count of the number of Novell SNAP FDDI frames that have been converted to Raw 802.3 Ethernet frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.3 | ColumnfmXlateToEthNovellSnapToEthIIFrames | read-only | mandatory | This object is a count of the number of Novell SNAP FDDI frames that have been converted to Ethernet II frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.4 | ColumnfmXlateToEthNovellSnapToSnapFrames | read-only | mandatory | This object is a count of the number of Novell SNAP FDDI frames that have been converted to Novell SNAP Ethernet frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.5 | ColumnfmXlateToEthAppleTalkSnapToSnapFrames | read-only | mandatory | This object is a count of the number of AppleTalk SNAP FDDI frames that have been converted to Novell SNAP Ethernet frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.6 | ColumnfmXlateToEthIpSnapForFragmentationFrames | read-only | mandatory | This object is a count of the number of IP FDDI frames that were fragmented. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.7 | ColumnfmXlateToEthIpSnapFragmentedFrames | read-only | mandatory | This object is a count of the number of Ethernet frames that were forwarded to the switch forwarding engine as a result of IP fragmentation. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.8 | ColumnfmXlateToEthBridgeTunnelToEthIIFrames | read-only | mandatory | This object is a count of the number of Bridge Tunnel FDDI frames that have been converted to Ethernet II frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.9 | ColumnfmXlateToEthOtherSnapToEthIIFrames | read-only | mandatory | This object is a count of the number of SNAP FDDI frames that do not fall into one of the previous SNAP FDDI categories that have been converted to Ethernet II… |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.10 | ColumnfmXlateToEthOtherSnapToSnapFrames | read-only | mandatory | This object is a count of the number of SNAP FDDI frames that do not fall into one of the previous SNAP FDDI categories that have been converted to Ethernet SN… |
| 1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.11 | ColumnfmXlateToEth8022To8022Frames | read-only | mandatory | This object is a count of the number of 802.2 FDDI frames that have been converted to Ethernet 802.2 frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3 | NodefmFDDIXlateToFDDIInfo | |||
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1 | TablefmXlateToFDDITable | not-accessible | mandatory | Table of statistics that count the number of frames successfully forwarded from the switch forwarding engine to the FDDI ring. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1 | RowfmXlateToFDDIEntry | not-accessible | mandatory | An entry in the table, containing information about a FDDI module. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.1 | ColumnfmXlateToFDDIIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.2 | ColumnfmXlateToFDDINovellRaw8023ToSnapFrames | read-only | mandatory | This object is a count of the number of Novell Raw 802.3 Ethernet frames that have been converted to SNAP FDDI frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.3 | ColumnfmXlateToFDDINovellEthIIToSnapFrames | read-only | mandatory | This object is a count of the number of Ethernet II frames that have been converted to SNAP FDDI frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.4 | ColumnfmXlateToFDDINovellSnapToSnapFrames | read-only | mandatory | This object is a count of the number of Novell SNAP Ethernet frames that have been converted to SNAP FDDI frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.5 | ColumnfmXlateToFDDIEthIIToBridgeTunnelFrames | read-only | mandatory | This object is a count of the number of Ethernet II frames that have been converted to Bridge Tunnel FDDI frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.6 | ColumnfmXlateToFDDIEthIIToSnapFrames | read-only | mandatory | This object is a count of the number of Ethernet II frames that have been converted to SNAP FDDI frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.7 | ColumnfmXlateToFDDIOtherSnapToSnapFrames | read-only | mandatory | This object is a count of the number of SNAP frames that do not fall into one of the above listed SNAP type categories that have been translated to Ethernet II. |
| 1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.8 | ColumnfmXlateToFDDI8022To8022Frames | read-only | mandatory | This object is a count of the number of FDDI 802.2 frames that have been converted to Ethernet 802.2 frames. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4 | NodefmFDDIFilterInfo | |||
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1 | TablefmFilterTable | not-accessible | mandatory | Table of statistics that count the number of frames that were not forwarded by the FDDI module. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1 | RowfmFilterEntry | not-accessible | mandatory | An entry in the table, containing information about a FDDI module. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.1 | ColumnfmFilterIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.2 | ColumnfmFilterFcsInvalidFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid FCS. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.3 | ColumnfmFilterDataLengthFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid data length. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.4 | ColumnfmFilterErrorIndFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame's error indication flag was set. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.5 | ColumnfmFilterFddiFifoOverrunFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the FDDI FIFO experienced an overflow. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.6 | ColumnfmFilterFddiInternalErrorFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the module experienced an internal error. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.7 | ColumnfmFilterNoBufferSpaceFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the module did not have sufficient buffer space. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.8 | ColumnfmFilterNoEndDelimitFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid end delimiter. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.9 | ColumnfmFilterNoLlcHeaderFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid LLC header. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.10 | ColumnfmFilterSourceRouteFrames | read-only | mandatory | The FDDI module does not forward source routing frames. This object is a count of the number of such frames that were filtered. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.11 | ColumnfmFilterNoSnapHeaderFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid SNAP header. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.12 | ColumnfmFilterTooLargeFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame was too large. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.13 | ColumnfmFilterNovellSnapFilteredFrames | read-only | mandatory | This object is a count of the number of Novell SNAP FDDI frames that were filtered by the module. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.14 | ColumnfmFilterCantFragmentFrames | read-only | mandatory | This object is a count of the number of FDDI IP frames that were not forwarded because the module was unable to fragment the frame. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.15 | ColumnfmFilterBadIpHeaderFrames | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid IP header. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.16 | ColumnfmFilterRingDownDiscards | read-only | mandatory | This object is a count of the number of FDDI frames that were not forwarded because the FDDI ring was not operational. |
| 1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.17 | ColumnfmFilterNovellOtherFilteredFrames | read-only | mandatory | This object is the sum of the Novell Ethernet frames that were not forwarded because they contained an invalid size field and the number of Novell Ethernet fra… |
| 1.3.6.1.4.1.437.1.1.2.2.2 | NodefmAtmBasic | |||
| 1.3.6.1.4.1.437.1.1.2.2.2.1 | NodefmAtmCfgInfo | |||
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1 | TablefmAtmCfgTable | not-accessible | mandatory | Table of configuration and status information about ATM modules. |
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1.1 | RowfmAtmCfgEntry | not-accessible | mandatory | An entry in the table, containing information about one ATM module. |
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.1 | ColumnfmAtmCfgIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.2 | ColumnfmAtmCfgPOSTResult | read-only | mandatory | This object indicates the result of the ATM module's Power On Self Test (POST), that is, which module component, if any, failed POST. If the module passed POST… |
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.3 | ColumnfmAtmCfgPOSTTest | read-only | mandatory | This object indicates the specific test that caused the POST to fail. If the ATM module passed POST, this item will return no-failure(2). |
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.4 | ColumnfmAtmCfgPOSTLoopbackResult | read-only | mandatory | In the event that the ATM module fails a loopback test during POST, this object will indicate which portion of the test caused the failure. If the value of fmA… |
| 1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.5 | ColumnfmAtmCfgFramingMode | read-only | mandatory | The mode of operation for the SONET PLIM. The default value is sts-3c(1). |
| 1.3.6.1.4.1.437.1.1.2.2.2.2 | NodefmAtmStatsInfo | |||
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1 | TablefmAtmRxStatTable | not-accessible | mandatory | Table of receive statistics on ATM modules. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1 | RowfmAtmRxStatEntry | not-accessible | mandatory | An entry in the table, containing receive statistics about one ATM module. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.1 | ColumnfmAtmRxStatIndex | read-only | mandatory | This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.2 | ColumnfmAtmRxControlFrames | read-only | mandatory | A count of number of AAL5 control frames received by the module. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.3 | ColumnfmAtmRxLocalLecFrames | read-only | mandatory | A count of AAL5 frames received with LEC ids matching the module's LEC id. These frames are discarded. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.4 | ColumnfmAtmRxNoBufferDiscards | read-only | mandatory | A count of AAL5 frames received that were discarded due to a lack of frame buffer resources in the module's forwarding engine. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.5 | ColumnfmAtmRxCRCErrors | read-only | mandatory | A count of AAL5 frames received that were discarded due to CRC errors. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.6 | ColumnfmAtmRxFrameTooLongs | read-only | mandatory | A count of AAL5 frames received that exceed the maximum permitted frame size as defined by ifMtu object the port. |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.7 | ColumnfmAtmRxOtherDiscards | read-only | mandatory | A count of AAL5 frames received that were discarded due to reasons other than a lack of frame buffer resources in the module's forwarding engine, errors, frame… |
| 1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.8 | ColumnfmAtmRxHecCellErrors | read-only | mandatory | A count of ATM cells received with errors in HEC header. |