MIB Viewer

ETHER-WIS

33 objects
The objects in this MIB module are used in conjunction with objects in the SONET-MIB and the MAU-MIB to manage the Ethernet WAN Interface Sublayer (WIS). The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2000 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002, 'IEEE Standard for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer and Management Parameters for 10 Gb/s Operation', 30 August 2002. Of particular interest are Clause 50, 'WAN Interface Sublayer (WIS), type 10GBASE-W', Clause 30, '10Mb/s, 100Mb/s, 1000Mb/s, and 10Gb/s MAC Control, and Link Aggregation Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3637; see the RFC itself for full legal notices.
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.134IdentityetherWisMIBThe objects in this MIB module are used in conjunction with objects in the SONET-MIB and the MAU-MIB to manage the Ethernet WAN Interface Sublayer (WIS). The f…
1.3.6.1.2.1.10.134.1NodeetherWisObjects
1.3.6.1.2.1.10.134.1.1NodeetherWisDevice
1.3.6.1.2.1.10.134.1.1.1TableetherWisDeviceTablenot-accessiblecurrentThe table for Ethernet WIS devices
1.3.6.1.2.1.10.134.1.1.1.1RowetherWisDeviceEntrynot-accessiblecurrentAn entry in the Ethernet WIS device table. For each instance of this object there MUST be a corresponding instance of sonetMediumEntry.
1.3.6.1.2.1.10.134.1.1.1.1.1ColumnetherWisDeviceTxTestPatternModeread-writecurrentThis variable controls the transmit test pattern mode. The value none(1) puts the the WIS transmit path into the normal operating mode. The value squareWave(2)…
1.3.6.1.2.1.10.134.1.1.1.1.2ColumnetherWisDeviceRxTestPatternModeread-writecurrentThis variable controls the receive test pattern mode. The value none(1) puts the the WIS receive path into the normal operating mode. The value prbs31(3) puts …
1.3.6.1.2.1.10.134.1.1.1.1.3ColumnetherWisDeviceRxTestPatternErrorsread-writecurrentThis object counts the number of errors detected when the WIS receive path is operating in the PRBS31 test pattern mode. It is reset to zero when the WIS recei…
1.3.6.1.2.1.10.134.1.2NodeetherWisSection
1.3.6.1.2.1.10.134.1.2.1TableetherWisSectionCurrentTablenot-accessiblecurrentThe table for the current state of Ethernet WIS sections.
1.3.6.1.2.1.10.134.1.2.1.1RowetherWisSectionCurrentEntrynot-accessiblecurrentAn entry in the etherWisSectionCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetSectionCurrentEntry.
1.3.6.1.2.1.10.134.1.2.1.1.1ColumnetherWisSectionCurrentJ0Transmittedread-writecurrentThis is the 16-octet section trace message that is transmitted in the J0 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic sh…
1.3.6.1.2.1.10.134.1.2.1.1.2ColumnetherWisSectionCurrentJ0Receivedread-onlycurrentThis is the 16-octet section trace message that was most recently received in the J0 byte.
1.3.6.1.2.1.10.134.2NodeetherWisObjectsPath
1.3.6.1.2.1.10.134.2.1NodeetherWisPath
1.3.6.1.2.1.10.134.2.1.1TableetherWisPathCurrentTablenot-accessiblecurrentThe table for the current state of Ethernet WIS paths.
1.3.6.1.2.1.10.134.2.1.1.1RowetherWisPathCurrentEntrynot-accessiblecurrentAn entry in the etherWisPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetPathCurrentEntry.
1.3.6.1.2.1.10.134.2.1.1.1.1ColumnetherWisPathCurrentStatusread-onlycurrentThis variable indicates the current status of the path payload with a bit map that can indicate multiple defects at once. The bit positions are assigned as fol…
1.3.6.1.2.1.10.134.2.1.1.1.2ColumnetherWisPathCurrentJ1Transmittedread-writecurrentThis is the 16-octet path trace message that is transmitted in the J1 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift…
1.3.6.1.2.1.10.134.2.1.1.1.3ColumnetherWisPathCurrentJ1Receivedread-onlycurrentThis is the 16-octet path trace message that was most recently received in the J1 byte.
1.3.6.1.2.1.10.134.2.2NodeetherWisFarEndPath
1.3.6.1.2.1.10.134.2.2.1TableetherWisFarEndPathCurrentTablenot-accessiblecurrentThe table for the current far-end state of Ethernet WIS paths.
1.3.6.1.2.1.10.134.2.2.1.1RowetherWisFarEndPathCurrentEntrynot-accessiblecurrentAn entry in the etherWisFarEndPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetFarEndPathCurrentEntry.
1.3.6.1.2.1.10.134.2.2.1.1.1ColumnetherWisFarEndPathCurrentStatusread-onlycurrentThis variable indicates the current status at the far end of the path using a bit map that can indicate multiple defects at once. The bit positions are assigne…
1.3.6.1.2.1.10.134.3NodeetherWisConformance
1.3.6.1.2.1.10.134.3.1NodeetherWisGroups
1.3.6.1.2.1.10.134.3.1.1GroupetherWisDeviceGroupBasiccurrentA collection of objects that support test features required of all WIS devices.
1.3.6.1.2.1.10.134.3.1.2GroupetherWisDeviceGroupExtracurrentA collection of objects that support optional WIS device test features.
1.3.6.1.2.1.10.134.3.1.3GroupetherWisSectionGroupcurrentA collection of objects that provide required information about a WIS section.
1.3.6.1.2.1.10.134.3.1.4GroupetherWisPathGroupcurrentA collection of objects that provide required information about a WIS path.
1.3.6.1.2.1.10.134.3.1.5GroupetherWisFarEndPathGroupcurrentA collection of objects that provide required information about the far end of a WIS path.
1.3.6.1.2.1.10.134.3.2NodeetherWisCompliances
1.3.6.1.2.1.10.134.3.2.1ComplianceetherWisComplianceread-onlycurrentThe compliance statement for interfaces that include the Ethernet WIS. Compliance with the following external compliance statements is prerequisite: MIB Module…