MIB Viewer

EXTREME-BASE-MIB

1925 objects
Extreme System objects: objects common to all platforms
Imported Objects
RFC1155-SMIenterprises
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIOBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.1916Nodeextremenetworks
1.3.6.1.4.1.1916.0NodeextremeV1Traps
1.3.6.1.4.1.1916.0.6NotificationextremeOverheatcurrentA overheat trap indicates that the on board tempature sensor has reported a overheat condition. System will shutdown until unit has suficiently cooled such tha…
1.3.6.1.4.1.1916.0.7NotificationextremeFanfailedcurrentA fan failed trap indicates one or more of the cooling fans inside the device has failed. A fanOK trap will be sent once the fan has attained normal operation.
1.3.6.1.4.1.1916.0.8NotificationextremeFanOKcurrentA fan has transitioned out of a failure state and is now operating correctly.
1.3.6.1.4.1.1916.0.9NotificationextremeInvalidLoginAttemptcurrentA user attempted to login to console or by telnet but was refused access due to incorrect username or password
1.3.6.1.4.1.1916.0.10NotificationextremePowerSupplyFailcurrentOne or more sources of power to this agent has failed. Presumably a redundant power-supply has taken over.
1.3.6.1.4.1.1916.0.11NotificationextremePowerSupplyGoodcurrentOne or more previously bad sources of power to this agent has come back to life without causing an agent restart.
1.3.6.1.4.1.1916.0.12NotificationextremeRpsAlarmcurrentAttached Redundant Power Supply device is indicating an alarm condition.
1.3.6.1.4.1.1916.0.13NotificationextremeRpsNoAlarmcurrentAttached Redundant Power Supply device is no longer indicating an alarm condition.
1.3.6.1.4.1.1916.0.14NotificationextremeSmartTrapcurrentSignifies that the value of one of the object identifiers (or the value of an object below that in the MIB tree) defined in the extremeSmartTrapRulesTable has …
1.3.6.1.4.1.1916.0.15NotificationextremeModuleStateChangedcurrentSignifies that the value of the extremeSlotModuleState for the specified extremeSlotNumber has changed.
1.3.6.1.4.1.1916.0.17NotificationextremeEsrpStateChangecurrentSignifies Esrp state change
1.3.6.1.4.1.1916.0.18NotificationextremeSlbUnitAddedcurrentThe server load balancer has activated a group of virtual servers that it normally would not activate. This may be due to the failure of another server load ba…
1.3.6.1.4.1.1916.0.19NotificationextremeSlbUnitRemovedcurrentThe server load balancer has deactivated a group of virtual servers that it normally has active. This indicates that something is wrong in the server load bala…
1.3.6.1.4.1.1916.0.20NotificationextremeEdpNeighborAddedcurrentThis node discovers a new neighbor through Extreme Discovery Protocol.
1.3.6.1.4.1.1916.0.21NotificationextremeEdpNeighborRemovedcurrentNo EDP updates are received from this neighbor within the configured timeout period and this neighbor entry is aged out by the device.
1.3.6.1.4.1.1916.1NodeextremeAgent
1.3.6.1.4.1.1916.1.1IdentityextremeSystemExtreme System objects: objects common to all platforms
1.3.6.1.4.1.1916.1.1.1NodeextremeSystemCommon
1.3.6.1.4.1.1916.1.1.1.3ScalarextremeSaveConfigurationread-writecurrentWhen this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value…
1.3.6.1.4.1.1916.1.1.1.4ScalarextremeSaveStatusread-onlycurrentThis object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this o…
1.3.6.1.4.1.1916.1.1.1.5ScalarextremeCurrentConfigInUseread-onlycurrentShows which NVRAM configuration store was used at last boot
1.3.6.1.4.1.1916.1.1.1.6ScalarextremeConfigToUseOnRebootread-writecurrentControls which NVRAM configuration store will be used on next reboot.
1.3.6.1.4.1.1916.1.1.1.7ScalarextremeOverTemperatureAlarmread-onlycurrentAlarm status of overtemperature sensor in device enclosure.
1.3.6.1.4.1.1916.1.1.1.8ScalarextremeCurrentTemperatureread-onlycurrentCurrent temperature in degrees celcius measured inside device enclosure.
1.3.6.1.4.1.1916.1.1.1.9TableextremeFanStatusTablenot-accessiblecurrentTable of operational status of all internal cooling fans.
1.3.6.1.4.1.1916.1.1.1.9.1RowextremeFanStatusEntrynot-accessiblecurrentEntry in table of all internal cooling fans.
1.3.6.1.4.1.1916.1.1.1.9.1.1ColumnextremeFanNumberread-onlycurrentIdentifier of cooling fan, numbered from the front and/or left side of device.
1.3.6.1.4.1.1916.1.1.1.9.1.2ColumnextremeFanOperationalread-onlycurrentOperational status of a cooling fan.
1.3.6.1.4.1.1916.1.1.1.9.1.3ColumnextremeFanEntPhysicalIndexread-onlycurrentThe entity index for this fan entity in the entity table.
1.3.6.1.4.1.1916.1.1.1.10ScalarextremePrimaryPowerOperationalread-onlycurrentOperational status of internal power supply of a device.
1.3.6.1.4.1.1916.1.1.1.11ScalarextremeRedundantPowerStatusread-onlycurrentOperational status of an external redundant power supply to a device.
1.3.6.1.4.1.1916.1.1.1.12ScalarextremeRedundantPowerAlarmread-onlycurrentAlarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
1.3.6.1.4.1.1916.1.1.1.13ScalarextremePrimarySoftwareRevread-onlycurrentThe software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This …
1.3.6.1.4.1.1916.1.1.1.14ScalarextremeSecondarySoftwareRevread-onlycurrentThe software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. Thi…
1.3.6.1.4.1.1916.1.1.1.15ScalarextremeImageToUseOnRebootread-writecurrentControls which image will be used on next reboot.
1.3.6.1.4.1.1916.1.1.1.16ScalarextremeSystemIDread-onlycurrentThis represents the System ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.17ScalarextremeSystemBoardIDread-onlycurrentThis represents the Board ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.18ScalarextremeSystemLeftBoardIDread-onlycurrentThis represents the Left Board ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.19ScalarextremeSystemRightBoardIDread-onlycurrentThis represents the Right Board ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.20ScalarextremeInputPowerVoltageread-onlycurrentThe input power voltage at which the system is currently operating.
1.3.6.1.4.1.1916.1.1.1.21ScalarextremePowerStatusread-onlycurrentOperational status of the power supply to a device.
1.3.6.1.4.1.1916.1.1.1.22ScalarextremePowerAlarmread-onlycurrentAlarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
1.3.6.1.4.1.1916.1.1.1.23ScalarextremeRmonEnableread-writecurrentSetting this to true will cause the agent to start collecting RMON statistics.
1.3.6.1.4.1.1916.1.1.1.25ScalarextremeBootROMVersionread-onlycurrentThe software revision of the bootrom on the device. This string will have a zero length if the revision is unknown or invalid.
1.3.6.1.4.1.1916.1.1.1.26ScalarextremeDot1dTpFdbTableEnableread-writecurrentSetting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed.
1.3.6.1.4.1.1916.1.1.1.27TableextremePowerSupplyTablenot-accessiblecurrentTable of status of all power supplies in the system.
1.3.6.1.4.1.1916.1.1.1.27.1RowextremePowerSupplyEntrynot-accessiblecurrentAn entry indicating the status of a specific power supply.
1.3.6.1.4.1.1916.1.1.1.27.1.1ColumnextremePowerSupplyNumberaccessible-for-notifycurrentPower supply number.
1.3.6.1.4.1.1916.1.1.1.27.1.2ColumnextremePowerSupplyStatusread-onlycurrentStatus of the power supply.
1.3.6.1.4.1.1916.1.1.1.27.1.3ColumnextremePowerSupplyInputVoltageread-onlycurrentInput voltage of the power supply
1.3.6.1.4.1.1916.1.1.1.27.1.4ColumnextremePowerSupplySerialNumberread-onlycurrentThe serial number of the power supply unit.
1.3.6.1.4.1.1916.1.1.1.27.1.5ColumnextremePowerSupplyEntPhysicalIndexread-onlycurrentThe entity index for this psu entity in the entity table.
1.3.6.1.4.1.1916.1.1.1.28ScalarextremeCpuAggregateUtilizationread-onlycurrentThe aggregate CPU utilization since the time the start started executing.
1.3.6.1.4.1.1916.1.1.1.29TableextremeCpuTask2Tablenot-accessiblecurrentTable of CPU tasks that are active.
1.3.6.1.4.1.1916.1.1.1.29.1RowextremeCpuTask2Entrynot-accessiblecurrentAn entry in table of describes a single task.
1.3.6.1.4.1.1916.1.1.1.29.1.1ColumnextremeCpuTask2CpuIdnot-accessiblecurrentCPU on which this task last executed or is executing. The primary CPU has a value of 1.
1.3.6.1.4.1.1916.1.1.1.29.1.2ColumnextremeCpuTask2Namenot-accessiblecurrentName associated with the reported task id.
1.3.6.1.4.1.1916.1.1.1.29.1.3ColumnextremeCpuTask2Idread-onlycurrentTask identifier assigned by the operating system when this task is spawned.
1.3.6.1.4.1.1916.1.1.1.29.1.4ColumnextremeCpuTask2Pcread-onlycurrentThe value of the program counter for this task. It indicates the address of the next instruction that would be executed once the operating system resumes this …
1.3.6.1.4.1.1916.1.1.1.29.1.5ColumnextremeCpuTask2Statusread-onlycurrentThe current status of the task as reported by the operating system.
1.3.6.1.4.1.1916.1.1.1.29.1.6ColumnextremeCpuTask2Utilizationread-onlycurrentThe current CPU utilization by this task. This is the utilization when the task last executed.
1.3.6.1.4.1.1916.1.1.1.29.1.7ColumnextremeCpuTask2MaxUtilizationread-writecurrentThe maximum CPU utilization by this task since the time the start started executing. This value may be cleared.
1.3.6.1.4.1.1916.1.1.1.30ScalarextremeAuthFailSrcAddraccessible-for-notifycurrentThe IP address of the originator of the bad SNMP request that caused the generation of an authentication failure trap.
1.3.6.1.4.1.1916.1.1.1.31ScalarextremeCpuTransmitPriorityread-writedeprecatedThe CPU transmit priority.
1.3.6.1.4.1.1916.1.1.1.32ScalarextremeImageBootedread-onlycurrentThe image with which the switch was last booted, using which it is currently running.
1.3.6.1.4.1.1916.1.1.1.33ScalarextremeMsmFailoverCauseread-onlycurrentThe cause of the last MSM failover. never(1) means an MSM Failover has not occurred since the last reboot. admin(2) means the failover was initiated by the use…
1.3.6.1.4.1.1916.1.1.1.34TableextremeImageTablenot-accessiblecurrentA table containing information about each software image.
1.3.6.1.4.1.1916.1.1.1.34.1RowextremeImageEntrynot-accessiblecurrentA table entry containing information about each software image.
1.3.6.1.4.1.1916.1.1.1.34.1.1ColumnextremeImageNumberread-onlycurrentA unique integer identifying the particular software image.
1.3.6.1.4.1.1916.1.1.1.34.1.2ColumnextremeMajorVersionread-onlycurrentThe ExtremeWare Release Major Version.
1.3.6.1.4.1.1916.1.1.1.34.1.3ColumnextremeSubMajorVersionread-onlydeprecatedThe ExtremeWare Release Sub-major Version. This object is deprecated from extremeware 7.3. The extremeMinorVersion gets the value of extremeSubMajorVersion and…
1.3.6.1.4.1.1916.1.1.1.34.1.4ColumnextremeMinorVersionread-onlycurrentThe ExtremeWare Release Minor Version.
1.3.6.1.4.1.1916.1.1.1.34.1.5ColumnextremeBuildNumberread-onlycurrentThe ExtremeWare Build Number.
1.3.6.1.4.1.1916.1.1.1.34.1.6ColumnextremeTechnologyReleaseNumberread-onlycurrentThe Technology Release version. This value is zero for all but TR releases.
1.3.6.1.4.1.1916.1.1.1.34.1.7ColumnextremeSustainingReleaseNumberread-onlycurrentThe Sustaining Release number for the ExtremeWare version.
1.3.6.1.4.1.1916.1.1.1.34.1.8ColumnextremeBranchRevisionNumberread-onlycurrentThe incremental build on specified branch.
1.3.6.1.4.1.1916.1.1.1.34.1.9ColumnextremeImageTyperead-onlycurrentThe branch type from which the image was built.
1.3.6.1.4.1.1916.1.1.1.34.1.10ColumnextremeImageDescriptionread-onlycurrentA unique string that can be used to identify the specific patch, technology, or development branch release.
1.3.6.1.4.1.1916.1.1.1.34.1.11ColumnextremeImageSecurityread-onlydeprecatedIndicates whether image was built with ssh.This object is deprecated, the ssh capability can be obtained from the extremeImageSshCapability of the ImageFeature…
1.3.6.1.4.1.1916.1.1.1.34.1.12ColumnextremePatchVersionread-onlycurrentThe ExtremeWare Release Patch Version.
1.3.6.1.4.1.1916.1.1.1.35TableextremeImageFeatureTablenot-accessiblecurrentA table containing information about the software features.
1.3.6.1.4.1.1916.1.1.1.35.1RowextremeImageFeatureEntrynot-accessiblecurrentA table entry containing information about software features.
1.3.6.1.4.1.1916.1.1.1.35.1.1ColumnextremeImageFeatureNumberread-onlycurrentA unique integer identifying the particular software image.
1.3.6.1.4.1.1916.1.1.1.35.1.2ColumnextremeImageSshCapabilityread-onlycurrentIndicates whether image has ssh capability.
1.3.6.1.4.1.1916.1.1.1.35.1.3ColumnextremeImageUAACapabilityread-onlycurrentIndicates whether image has Wireless(UAA) components.
1.3.6.1.4.1.1916.1.1.2NodeextremeChassisGroup
1.3.6.1.4.1.1916.1.1.2.1ScalarextremeMasterMSMSlotread-onlycurrentThe extremeSlotNumber of the master MSM module.
1.3.6.1.4.1.1916.1.1.2.2TableextremeSlotTablenot-accessiblecurrentA table containing information about each slot in the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1RowextremeSlotEntrynot-accessiblecurrentA table entry containing information about the module in each slot of the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1.1ColumnextremeSlotNumberread-onlycurrentA unique integer identifying the particular slot in the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1.2ColumnextremeSlotNameread-onlycurrentA name identifying the particular slot in the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1.3ColumnextremeSlotModuleConfiguredTyperead-writecurrentThe configured module type for the given slot. At startup, the module-type is none(1). It is possible to configure the module-type even if there is no module i…
1.3.6.1.4.1.1916.1.1.2.2.1.4ColumnextremeSlotModuleInsertedTyperead-onlycurrentThe module type inserted into the slot. It is possible to have a slot inserted into the slot even though extremeSlotConfiguredType is none(1).
1.3.6.1.4.1.1916.1.1.2.2.1.5ColumnextremeSlotModuleStateread-onlycurrentThe state of the module inserted in this slot.
1.3.6.1.4.1.1916.1.1.2.2.1.6ColumnextremeSlotModuleSerialNumberread-onlycurrentThe serial number of the module inserted in this slot.
1.3.6.1.4.1.1916.1.1.2.3ScalarextremeChassisPortsPerSlotread-onlycurrentThe maximum number of ports that can be accomodated in a single slot. This number would change to accomodate blades with higher port density than current ones.
1.3.6.1.4.1.1916.1.1.3NodeextremeSystemHealthCheck
1.3.6.1.4.1.1916.1.1.3.1ScalarextremeHealthCheckErrorTypeaccessible-for-notifycurrentThe error reported in the system health check trap
1.3.6.1.4.1.1916.1.1.3.2ScalarextremeHealthCheckActionread-onlycurrentThe action/alarm level that has been configured for health check.
1.3.6.1.4.1.1916.1.1.3.3ScalarextremeHealthCheckMaxRetriesread-onlycurrentThe maximum number of times a module restart will be attempted if it fails. If extremeHealthCheckAction is not autorecovery(5), then this value is zero.
1.3.6.1.4.1.1916.1.1.4NodeextremeSystemThresholds
1.3.6.1.4.1.1916.1.1.4.1ScalarextremeCpuUtilRisingThresholdread-writecurrentRising threshold for CPU Aggregation utilization trap
1.3.6.1.4.1.1916.1.1.4.2ScalarextremeCpuTaskUtilPairaccessible-for-notifycurrentTaskName/CPU_% Util pair reported in CPU Utilization trap
1.3.6.1.4.1.1916.1.2IdentityextremeVlanExtreme Virtual LAN objects
1.3.6.1.4.1.1916.1.2.1NodeextremeVlanGroup
1.3.6.1.4.1.1916.1.2.1.1TableextremeVlanGlobalMappingTablenot-accessibledeprecatedThis table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a glob…
1.3.6.1.4.1.1916.1.2.1.1.1RowextremeVlanGlobalMappingEntrynot-accessiblecurrentAn individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTa…
1.3.6.1.4.1.1916.1.2.1.1.1.1ColumnextremeVlanGlobalMappingIdentifierread-onlycurrentAn index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN …
1.3.6.1.4.1.1916.1.2.1.1.1.2ColumnextremeVlanGlobalMappingIfIndexread-onlycurrentThe value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry.
1.3.6.1.4.1.1916.1.2.1.2TableextremeVlanIfTablenot-accessiblecurrentThis table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be …
1.3.6.1.4.1.1916.1.2.1.2.1RowextremeVlanIfEntrynot-accessiblecurrentAn individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIf…
1.3.6.1.4.1.1916.1.2.1.2.1.1ColumnextremeVlanIfIndexread-createcurrentThe index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex …
1.3.6.1.4.1.1916.1.2.1.2.1.2ColumnextremeVlanIfDescrread-createcurrentThis is a description of the VLAN interface.
1.3.6.1.4.1.1916.1.2.1.2.1.3ColumnextremeVlanIfTyperead-createcurrentThe VLAN interface type.
1.3.6.1.4.1.1916.1.2.1.2.1.4ColumnextremeVlanIfGlobalIdentifierread-createdeprecatedAn administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, th…
1.3.6.1.4.1.1916.1.2.1.2.1.6ColumnextremeVlanIfStatusread-createcurrentThe status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac…
1.3.6.1.4.1.1916.1.2.1.2.1.7ColumnextremeVlanIfIgnoreStpFlagread-writecurrentEnable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, th…
1.3.6.1.4.1.1916.1.2.1.2.1.8ColumnextremeVlanIfIgnoreBpduFlagread-writecurrentSetting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own net…
1.3.6.1.4.1.1916.1.2.1.2.1.9ColumnextremeVlanIfLoopbackModeFlagread-writecurrentSetting this object to true causes loopback mode to be enabled on this VLAN.
1.3.6.1.4.1.1916.1.2.1.2.1.10ColumnextremeVlanIfVlanIdread-onlycurrentThe VLAN ID of this VLAN.
1.3.6.1.4.1.1916.1.2.2NodeextremeVirtualGroup
1.3.6.1.4.1.1916.1.2.2.1ScalarextremeNextAvailableVirtIfIndexread-onlycurrentThe value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The curr…
1.3.6.1.4.1.1916.1.2.3NodeextremeEncapsulationGroup
1.3.6.1.4.1.1916.1.2.3.1TableextremeVlanEncapsIfTablenot-accessiblecurrentThis table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the syst…
1.3.6.1.4.1.1916.1.2.3.1.1RowextremeVlanEncapsIfEntrynot-accessiblecurrentAn individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextA…
1.3.6.1.4.1.1916.1.2.3.1.1.1ColumnextremeVlanEncapsIfIndexread-createcurrentThe index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by …
1.3.6.1.4.1.1916.1.2.3.1.1.2ColumnextremeVlanEncapsIfTyperead-createcurrentThe encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
1.3.6.1.4.1.1916.1.2.3.1.1.3ColumnextremeVlanEncapsIfTagread-createcurrentThe tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
1.3.6.1.4.1.1916.1.2.3.1.1.4ColumnextremeVlanEncapsIfStatusread-createcurrentThe row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may …
1.3.6.1.4.1.1916.1.2.4NodeextremeVlanIpGroup
1.3.6.1.4.1.1916.1.2.4.1TableextremeVlanIpTablenot-accessiblecurrentA list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index.
1.3.6.1.4.1.1916.1.2.4.1.1RowextremeVlanIpEntrynot-accessiblecurrentA extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface.
1.3.6.1.4.1.1916.1.2.4.1.1.1ColumnextremeVlanIpNetAddressread-createcurrentThe IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index.
1.3.6.1.4.1.1916.1.2.4.1.1.2ColumnextremeVlanIpNetMaskread-createcurrentThe IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress.
1.3.6.1.4.1.1916.1.2.4.1.1.3ColumnextremeVlanIpStatusread-createcurrentThe status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting th…
1.3.6.1.4.1.1916.1.2.4.1.1.4ColumnextremeVlanIpForwardingStateread-createcurrentIndicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable.
1.3.6.1.4.1.1916.1.2.5NodeextremeProtocolGroup
1.3.6.1.4.1.1916.1.2.5.1TableextremeVlanProtocolTablenot-accessiblecurrentTable of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProto…
1.3.6.1.4.1.1916.1.2.5.1.1RowextremeVlanProtocolEntrynot-accessiblecurrentOne member protocol ID of a protocol definition.
1.3.6.1.4.1.1916.1.2.5.1.1.1ColumnextremeVlanProtocolIndexread-createcurrentAn index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
1.3.6.1.4.1.1916.1.2.5.1.1.2ColumnextremeVlanProtocolIdIndexread-createcurrentAn index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to …
1.3.6.1.4.1.1916.1.2.5.1.1.3ColumnextremeVlanProtocolNameread-createcurrentA human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProto…
1.3.6.1.4.1.1916.1.2.5.1.1.4ColumnextremeVlanProtocolDllEncapsTyperead-createcurrentRepresents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and m…
1.3.6.1.4.1.1916.1.2.5.1.1.5ColumnextremeVlanProtocolIdread-createcurrentThe protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a conca…
1.3.6.1.4.1.1916.1.2.5.1.1.6ColumnextremeVlanProtocolStatusread-createcurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.1916.1.2.5.2TableextremeVlanProtocolVlanTablenot-accessiblecurrentTable to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited…
1.3.6.1.4.1.1916.1.2.5.2.1RowextremeVlanProtocolVlanEntrynot-accessiblecurrentA mapping of untagged packets of one protocol onto a particular VLAN.
1.3.6.1.4.1.1916.1.2.5.2.1.1ColumnextremeVlanProtocolVlanIfIndexread-createcurrentThe index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex …
1.3.6.1.4.1.1916.1.2.5.2.1.2ColumnextremeVlanProtocolVlanProtocolIndexread-createcurrentAn index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
1.3.6.1.4.1.1916.1.2.5.2.1.3ColumnextremeVlanProtocolVlanStatusread-createcurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.1916.1.2.6NodeextremeVlanOpaqueGroup
1.3.6.1.4.1.1916.1.2.6.1TableextremeVlanOpaqueTablenot-accessiblecurrentThis table lists the ports associated with each VLAN interface.
1.3.6.1.4.1.1916.1.2.6.1.1RowextremeVlanOpaqueEntrynot-accessiblecurrentThis represents the tagged and untagged ports on each slot per vlan.
1.3.6.1.4.1.1916.1.2.6.1.1.1ColumnextremeVlanOpaqueTaggedPortsread-onlycurrentEach bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise.
1.3.6.1.4.1.1916.1.2.6.1.1.2ColumnextremeVlanOpaqueUntaggedPortsread-onlycurrentEach bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise.
1.3.6.1.4.1.1916.1.2.7NodeextremeVlanStackGroup
1.3.6.1.4.1.1916.1.2.7.1TableextremeVlanStackTablenot-accessiblecurrentRepresents those components of the ifStackTable that do not contain a Physical interface.
1.3.6.1.4.1.1916.1.2.7.1.1RowextremeVlanStackEntrynot-accessiblecurrentEach entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physic…
1.3.6.1.4.1.1916.1.2.7.1.1.1ColumnextremeVlanStackHigherLayerread-onlycurrentThe higher layer in the logical vlan hierarchy.
1.3.6.1.4.1.1916.1.2.7.1.1.2ColumnextremeVlanStackLowerLayerread-onlycurrentThe lower layer in the logical vlan hierarchy.
1.3.6.1.4.1.1916.1.2.8NodeextremeVlanStatsGroup
1.3.6.1.4.1.1916.1.2.8.1TableextremeVlanL2StatsTablenot-accessiblecurrentThis tables contains per-VLAN layer 2 statistics information.
1.3.6.1.4.1.1916.1.2.8.1.1RowextremeVlanL2StatsEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.2.8.1.1.1ColumnextremeVlanL2StatsIfDescrread-onlycurrentThis is a description(name) of the VLAN.
1.3.6.1.4.1.1916.1.2.8.1.1.2ColumnextremeVlanL2StatsPktsToCpuread-onlycurrentThe total number of packets of this VLAN sent to the CPU.
1.3.6.1.4.1.1916.1.2.8.1.1.3ColumnextremeVlanL2StatsPktsLearntread-onlycurrentThe total number of packets learnt on this VLAN.
1.3.6.1.4.1.1916.1.2.8.1.1.4ColumnextremeVlanL2StatsIgmpCtrlPktsSnoopedread-onlycurrentThe total number of IGMP control packets snooped on this VLAN.
1.3.6.1.4.1.1916.1.2.8.1.1.5ColumnextremeVlanL2StatsIgmpDataPktsSwitchedread-onlycurrentThe total number of IGMP data packets switched on this VLAN.
1.3.6.1.4.1.1916.1.2.9NodeextremeVlanAggregationGroup
1.3.6.1.4.1.1916.1.2.9.1TableextremeVlanAggregationTablenot-accessiblecurrentThis table contains the VLAN aggregation information.
1.3.6.1.4.1.1916.1.2.9.1.1RowextremeVlanAggregationEntrynot-accessiblecurrentInformation about the individual VLAN aggregation entry.
1.3.6.1.4.1.1916.1.2.9.1.1.1ColumnextremeVlanAggregationSuperVlanIfIndexread-onlycurrentThe Super Vlan index for this entry.
1.3.6.1.4.1.1916.1.2.9.1.1.2ColumnextremeVlanAggregationSubVlanIfIndexread-onlycurrentThe Sub Vlan index for this entry.
1.3.6.1.4.1.1916.1.2.9.1.1.3ColumnextremeVlanAggregationSubVlanStartIpNetAddressread-createcurrentThis represents the start network address of the IP range.
1.3.6.1.4.1.1916.1.2.9.1.1.4ColumnextremeVlanAggregationSubVlanStartIpNetMaskread-onlycurrentThis represents the start network address mask of the IP range
1.3.6.1.4.1.1916.1.2.9.1.1.5ColumnextremeVlanAggregationSubVlanEndIpNetAddressread-createcurrentThis represents the end network address of the IP range.
1.3.6.1.4.1.1916.1.2.9.1.1.6ColumnextremeVlanAggregationSubVlanEndIpNetMaskread-onlycurrentThis represents the end network address mask of the IP range.
1.3.6.1.4.1.1916.1.2.9.1.1.7ColumnextremeVlanAggregationStatusread-createcurrentThe status of this entry.
1.3.6.1.4.1.1916.1.2.9.2TableextremeVlanAggregationConfigTablenot-accessiblecurrentThis table contains the sub VLAN proxy setting information.
1.3.6.1.4.1.1916.1.2.9.2.1RowextremeVlanAggregationConfigEntrynot-accessiblecurrentInformation about the individual VLAN aggregation entry.
1.3.6.1.4.1.1916.1.2.9.2.1.1ColumnextremeVlanAggregationConfigSuperVlanIfIndexread-onlycurrentThe Super Vlan index for this entry.
1.3.6.1.4.1.1916.1.2.9.2.1.2ColumnextremeVlanAggregationConfigSubVlanProxyEnableread-createcurrentThe boolean flag that prevents normal communication between sub vlans.
1.3.6.1.4.1.1916.1.2.10NodeextremeVlanTranslationGroup
1.3.6.1.4.1.1916.1.2.10.1TableextremeVlanTranslationTablenot-accessiblecurrentThis table contains the VLAN translation information.
1.3.6.1.4.1.1916.1.2.10.1.1RowextremeVlanTranslationEntrynot-accessiblecurrentInformation about the individual VLAN translation entry.
1.3.6.1.4.1.1916.1.2.10.1.1.1ColumnextremeVlanTranslationSuperVlanIfIndexread-onlycurrentThe Super Vlan index for this entry.
1.3.6.1.4.1.1916.1.2.10.1.1.2ColumnextremeVlanTranslationMemberVlanIfIndexread-onlycurrentThe member Vlan index for this entry.
1.3.6.1.4.1.1916.1.2.10.1.1.3ColumnextremeVlanTranslationStatusread-createcurrentThe status of this entry.
1.3.6.1.4.1.1916.1.3IdentityextremeQosExtreme Quality-of-Service objects
1.3.6.1.4.1.1916.1.3.1NodeextremeQosCommon
1.3.6.1.4.1.1916.1.3.1.1ScalarextremeUnitPaceModeread-writedeprecatedThis object specifies whether the device currently recognises and gives priority treatment to the forwarding of packets with the PACE(tm) bit set in their MAC …
1.3.6.1.4.1.1916.1.3.1.4ScalarextremeQosModeread-writedeprecatedIndicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p prio…
1.3.6.1.4.1.1916.1.3.1.5ScalarextremeQosUnconfigureread-writedeprecatedSetting this to true will reset all QoS settings in the device to factory defaults. Reads from this value return an undefined value.
1.3.6.1.4.1.1916.1.3.1.6TableextremeQosProfileTablenot-accessiblecurrentThis table lists QoS profiles.
1.3.6.1.4.1.1916.1.3.1.6.1RowextremeQosProfileEntrynot-accessiblecurrentAn individual QoS profile Entry.
1.3.6.1.4.1.1916.1.3.1.6.1.1ColumnextremeQosProfileIndexread-createcurrentAn index that uniquely identifies an entry in the qos table.
1.3.6.1.4.1.1916.1.3.1.6.1.2ColumnextremeQosProfileNameread-createcurrentA unique qos profile name.
1.3.6.1.4.1.1916.1.3.1.6.1.3ColumnextremeQosProfileMinBwread-createcurrentThe minumum percentage of bandwidth that this queue requires. The Switch is required to provide the minumum amount of bandwidth to the queue. The lowest possib…
1.3.6.1.4.1.1916.1.3.1.6.1.4ColumnextremeQosProfileMaxBwread-createcurrentThe maximum percentage of bandwidth that this queue is permitted to use. If a non-default value is set for this object then it negates any previously set value…
1.3.6.1.4.1.1916.1.3.1.6.1.5ColumnextremeQosProfilePriorityread-createcurrentThe level of priority in which this queue will be serviced by the Switch.
1.3.6.1.4.1.1916.1.3.1.6.1.6ColumnextremeQosProfileRowStatusread-createcurrentThe status of the extremeQosProfile entry. This object can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac…
1.3.6.1.4.1.1916.1.3.1.7TableextremeQosByVlanMappingTablenot-accessiblecurrentTable to associate a Vlan with the QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table correspon…
1.3.6.1.4.1.1916.1.3.1.7.1RowextremeQosByVlanMappingEntrynot-accessiblecurrentThe QoS associated with a particular Vlan.
1.3.6.1.4.1.1916.1.3.1.7.1.1ColumnextremeQosByVlanMappingQosProfileIndexread-writecurrentValue of extremeQosProfileIndex that uniquely identifies a QoS Profile entry in extremeQosProfileTable. This indicates the QoS to be given to traffic for this …
1.3.6.1.4.1.1916.1.3.1.8TableextremePerPortQosTablenot-accessiblecurrentGlobal Qos Profiles are defined in the extremeQosProfileTable. This table contains a list of ports for which the definition of certain global Qos Profiles has …
1.3.6.1.4.1.1916.1.3.1.8.1RowextremePerPortQosEntrynot-accessiblecurrentAn individual overridden QoS profile Entry.
1.3.6.1.4.1.1916.1.3.1.8.1.1ColumnextremePerPortQosIndexread-createcurrentThe value of this variable is the same as the value of extremeQosProfileIndex of the Qos Profile which is overridden (for the port specified by ifIndex) by the…
1.3.6.1.4.1.1916.1.3.1.8.1.2ColumnextremePerPortQosMinBwread-createcurrentThe minumum percentage of bandwidth that this queue on the specified port requires. The Switch is required to provide the minumum amount of bandwidth to the qu…
1.3.6.1.4.1.1916.1.3.1.8.1.3ColumnextremePerPortQosMaxBwread-createcurrentThe maximum percentage of bandwidth that this queue on the specified port is permitted to use.
1.3.6.1.4.1.1916.1.3.1.8.1.4ColumnextremePerPortQosPriorityread-createcurrentThe level of priority in which this queue will be serviced by the Switch.
1.3.6.1.4.1.1916.1.3.1.8.1.5ColumnextremePerPortQosRowStatusread-createcurrentThe status of the extremePerPortQos entry. This object can be set to active(1) createAndGo(4) The following value may be read: active(1) Note that a destroy(6)…
1.3.6.1.4.1.1916.1.3.1.9TableextremeQosIngressPriorityTablenot-accessiblecurrentThis table lists QoS ingress priority settings.
1.3.6.1.4.1.1916.1.3.1.9.1RowextremeQosIngressPriorityEntrynot-accessiblecurrentAn individual QoS ingress priority Entry.
1.3.6.1.4.1.1916.1.3.1.9.1.1ColumnextremeQosIngressPriorityIndexread-onlycurrentAn index that uniquely identifies an entry in the qos ingress priority table.
1.3.6.1.4.1.1916.1.3.1.9.1.2ColumnextremeQosIngressPriorityNameread-onlycurrentA qos ingress priority name.
1.3.6.1.4.1.1916.1.3.1.9.1.3ColumnextremeQosIngressPriorityValueread-onlycurrentThe ingress Qos priority value.
1.3.6.1.4.1.1916.1.3.1.10TableextremeIQosProfileTablenot-accessiblecurrentThis table lists ingress QoS profiles.
1.3.6.1.4.1.1916.1.3.1.10.1RowextremeIQosProfileEntrynot-accessiblecurrentAn individual ingress QoS profile Entry.
1.3.6.1.4.1.1916.1.3.1.10.1.1ColumnextremeIQosProfileIndexread-onlycurrentAn index that uniquely identifies an entry in the ingress Qos table.
1.3.6.1.4.1.1916.1.3.1.10.1.2ColumnextremeIQosProfileNameread-onlycurrentA unique ingress Qos profile name.
1.3.6.1.4.1.1916.1.3.1.10.1.3ColumnextremeIQosProfileMinBwTyperead-onlycurrentThe type of the current minimum bandwith setting. A value of 1 signifies that the minimum bandwith value is a percentage of the configurable port bandwidth. A …
1.3.6.1.4.1.1916.1.3.1.10.1.4ColumnextremeIQosProfileMinBwread-onlycurrentThe guaranteed minimum bandwidth for this queue, expressed as either a percentage or a specific bandwidth value, as specified by the value of extremeIQosProfil…
1.3.6.1.4.1.1916.1.3.1.10.1.5ColumnextremeIQosProfileMaxBwTyperead-onlycurrentThe type of the current maximum bandwith setting. A value of 1 signifies that the maximum bandwith value is a percentage of the configurable port bandwidth. A …
1.3.6.1.4.1.1916.1.3.1.10.1.6ColumnextremeIQosProfileMaxBwread-onlycurrentThe maximum allowed input bandwidth for this queue, expressed as either a percentage or a specific bandwidth value, as specified by the value of extremeIQosPro…
1.3.6.1.4.1.1916.1.3.1.10.1.7ColumnextremeIQosProfileREDread-onlycurrentThe Random Early Drop threshold. When the input queue fill ratio exceeds this percentage, frames start to drop randomly with a linear increasing drop probabili…
1.3.6.1.4.1.1916.1.3.1.10.1.8ColumnextremeIQosProfileMaxBufread-onlycurrentThe percentage of the total ingress queue size to use. Lower values can be used to reduce the max latency through this queue, but with potentially greater loss…
1.3.6.1.4.1.1916.1.3.1.11TableextremeIQosByVlanMappingTablenot-accessiblecurrentTable to associate a Vlan with the ingress QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table c…
1.3.6.1.4.1.1916.1.3.1.11.1RowextremeIQosByVlanMappingEntrynot-accessiblecurrentThe ingress QoS associated with a particular Vlan.
1.3.6.1.4.1.1916.1.3.1.11.1.1ColumnextremeIQosByVlanMappingIQosProfileIndexread-onlycurrentValue of extremeIQosProfileIndex that uniquely identifies an ingress QoS Profile entry in extremeIQosProfileTable. This indicates the QoS to be given to traffi…
1.3.6.1.4.1.1916.1.4IdentityextremePortExtreme network port objects
1.3.6.1.4.1.1916.1.4.1TableextremePortLoadshareTablenot-accessibledeprecatedA table of bindings between a master port and its load-sharing slaves: create/delete entries here to add/delete a port to/from a load-sharing group. Default is…
1.3.6.1.4.1.1916.1.4.1.1RowextremePortLoadshareEntrynot-accessibledeprecatedA binding between a master port and one of its load-sharing slave ports.
1.3.6.1.4.1.1916.1.4.1.1.1ColumnextremePortLoadshareMasterIfIndexread-createdeprecatedThe ifIndex value which identifies the port controlling a loadsharing group of ports which includes extremePortLoadshareSlaveIfIndex.
1.3.6.1.4.1.1916.1.4.1.1.2ColumnextremePortLoadshareSlaveIfIndexread-createdeprecatedThe ifIndex value which identifies the port which is a member of a loadsharing group controlled by extremePortLoadshareMasterIfIndex.
1.3.6.1.4.1.1916.1.4.1.1.3ColumnextremePortLoadshareGroupingread-createdeprecatedThe Grouping value which identifies if load sharing is in pair or quad.
1.3.6.1.4.1.1916.1.4.1.1.4ColumnextremePortLoadshareStatusread-createdeprecatedThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.1916.1.4.2TableextremePortSummitlinkTablenot-accessibledeprecatedA table of Extreme link configuration and status information. Contains a row for only those ports that are capable of operating in Summitlink-mode.
1.3.6.1.4.1.1916.1.4.2.1RowextremePortSummitlinkEntrynot-accessibledeprecatedLink configuration and status information for a Summitlink Port.
1.3.6.1.4.1.1916.1.4.2.1.1ColumnextremePortSummitlinkAdminModeread-writedeprecatedConfigurable operating mode for this Summitlink port. Configure to summitlinkOnly(1) before connecting this port to a SummitVC device.
1.3.6.1.4.1.1916.1.4.2.1.2ColumnextremePortSummitlinkOperModeread-onlydeprecatedActual Operating mode.
1.3.6.1.4.1.1916.1.4.2.1.3ColumnextremePortSummitlinkStateread-onlydeprecatedCurrent status of a Summitlink link. Where a port has redundant PMD capability, this indicates up if either of the PMDs has an active link.
1.3.6.1.4.1.1916.1.4.2.1.4ColumnextremePortSummitlinkRejectReasonread-onlydeprecatedIf a Summitlink connection has been attempted and failed to reach the up(1) state, this indicates the potential source of the failure.
1.3.6.1.4.1.1916.1.4.3TableextremePortLoadshare2Tablenot-accessiblecurrentA table of bindings between a master port and its load-sharing slaves: create/delete entries here to add/delete a port to/from a load-sharing group. Default is…
1.3.6.1.4.1.1916.1.4.3.1RowextremePortLoadshare2Entrynot-accessiblecurrentA binding between a master port and one of its load-sharing slave ports.
1.3.6.1.4.1.1916.1.4.3.1.1ColumnextremePortLoadshare2MasterIfIndexnot-accessiblecurrentThe ifIndex value which identifies the port controlling a loadsharing group of ports which includes extremePortLoadshareSlaveIfIndex.
1.3.6.1.4.1.1916.1.4.3.1.2ColumnextremePortLoadshare2SlaveIfIndexnot-accessiblecurrentThe ifIndex value which identifies the port which is a member of a loadsharing group controlled by extremePortLoadshare2MasterIfIndex.
1.3.6.1.4.1.1916.1.4.3.1.3ColumnextremePortLoadshare2Algorithmread-createcurrentThis value identifies the load sharing algorithm to be used for this group of load shared ports.
1.3.6.1.4.1.1916.1.4.3.1.4ColumnextremePortLoadshare2Statusread-createcurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.1916.1.4.4TableextremePortRateShapeTablenot-accessiblecurrentA list of ports that have ingress rate limiting enforced.
1.3.6.1.4.1.1916.1.4.4.1RowextremePortRateShapeEntrynot-accessiblecurrentAn entry that is either a rate limited or a loopback port. Any vlan that has rate limited ports should have one loopback port defined. The traffic parameters f…
1.3.6.1.4.1.1916.1.4.4.1.1ColumnextremePortRateShapePortTyperead-createcurrentWhether a loopback or rate limited port.
1.3.6.1.4.1.1916.1.4.4.1.2ColumnextremePortRateShapeLoopbackTagread-createcurrentAn unique internal tag that will needs to be set up for the vlan corresponding to this entry for adding ingress rate limited ports to the corresponding vlan.
1.3.6.1.4.1.1916.1.4.4.1.3ColumnextremePortRateShapeStatusread-createcurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.1916.1.4.5TableextremePortUtilizationTablenot-accessiblecurrentGlobal Qos Profiles are defined in the extremeQosProfileTable. This table contains a list of ports for which certain QoS parms are reported.
1.3.6.1.4.1.1916.1.4.5.1RowextremePortUtilizationEntrynot-accessiblecurrentAn individual QoSReport Entry.
1.3.6.1.4.1.1916.1.4.5.1.1ColumnextremePortUtilizationAvgTxBwread-onlycurrentThe reported average bandwidth in the txmit direction. When displayed it shows as an Integer value i.e 99.99% is displayed as 9999.
1.3.6.1.4.1.1916.1.4.5.1.2ColumnextremePortUtilizationAvgRxBwread-onlycurrentThe reported average bandwidth in the receive direction. When displayed it shows as an Integer value i.e 99.99% is displayed as 9999.
1.3.6.1.4.1.1916.1.4.5.1.3ColumnextremePortUtilizationPeakTxBwread-onlycurrentThe reported peak bandwidth in the txmit direction. When displayed it shows as an Integer value i.e 99.99% is displayed as 9999.
1.3.6.1.4.1.1916.1.4.5.1.4ColumnextremePortUtilizationPeakRxBwread-onlycurrentThe reported peak bandwidth in the receive direction. When displayed it shows as an Integer value i.e 99.99% is displayed as 9999.
1.3.6.1.4.1.1916.1.4.6TableextremePortInfoTablenot-accessiblecurrentThis table contains a list of port information.
1.3.6.1.4.1.1916.1.4.6.1RowextremePortInfoEntrynot-accessiblecurrentAn individual Port Information Entry.
1.3.6.1.4.1.1916.1.4.6.1.1ColumnextremePortInfoFilterUpCounterread-writecurrentThe reported Port Filter up counter value. This counter indicates the number of times a port's link state has transitioned from DOWN to UP state.
1.3.6.1.4.1.1916.1.4.6.1.2ColumnextremePortInfoFilterDownCounterread-writecurrentThe reported Port Filter down counter value. This counter indicates the number of times a port's link state has transitioned from UP to DOWN state.
1.3.6.1.4.1.1916.1.4.7TableextremePortXenpakVendorTablenot-accessiblecurrentA table of Extreme Xenpak Module Vendor Name and type information. Contains a row for only those ports that are part of Xenpak module .
1.3.6.1.4.1.1916.1.4.7.1RowextremePortXenpakVendorEntrynot-accessiblecurrentVendor name and type for Xenpak module.
1.3.6.1.4.1.1916.1.4.7.1.1ColumnextremePortXenpakVendorNameread-onlycurrentA human-readable string representing Vendor name of this module. This string should be the same for all entries having the same Xenpak module: this entry may n…
1.3.6.1.4.1.1916.1.4.8NodeextremePortIngressStats
1.3.6.1.4.1.1916.1.4.8.1TableextremePortIngressStatsPortTablenot-accessiblecurrentPort ingress statistics are returned for ports which support ingress queuing. This table contains a list of counters for each port.
1.3.6.1.4.1.1916.1.4.8.1.1RowextremePortIngressPortStatsEntrynot-accessiblecurrentAn individual IngressStats Entry.
1.3.6.1.4.1.1916.1.4.8.1.1.1ColumnextremePortIngressStatsLinkStatusread-onlycurrentThe current status of the link. Ready indicates the port is ready to accept a link; Active indicates the link is present at this port; Disabled shows that the …
1.3.6.1.4.1.1916.1.4.8.1.1.2ColumnextremePortIngressStatsPortHighPriBytesread-onlycurrentThe sum of all per queue CIR counts for this port, which indicates the bytes forwarded for high-priority packets.
1.3.6.1.4.1.1916.1.4.8.1.1.3ColumnextremePortIngressStatsPortLowPriBytesread-onlycurrentThe sum of all per queue PR counts for this port, which indicates the bytes forwarded for low-priority packets.
1.3.6.1.4.1.1916.1.4.8.1.1.4ColumnextremePortIngressStatsPortDroppedBytesread-onlycurrentThe total number of bytes dropped for this port.
1.3.6.1.4.1.1916.1.4.8.1.1.5ColumnextremePortIngressStatsTxXoffread-onlycurrentThe number of XOFF Flow Control packets sent from this port due to receive traffic congestion.
1.3.6.1.4.1.1916.1.4.8.2TableextremePortIngressStatsQueueTablenot-accessiblecurrentPort ingress statistics are returned for ingress queues. This table contains a list of counters for each ingress queue.
1.3.6.1.4.1.1916.1.4.8.2.1RowextremePortIngressQueueStatsEntrynot-accessiblecurrentAn individual IngressStatsQueue Entry.
1.3.6.1.4.1.1916.1.4.8.2.1.1ColumnextremePortIngressStatsQueueIndexread-onlycurrentThe ingress queue being queried.
1.3.6.1.4.1.1916.1.4.8.2.1.2ColumnextremePortIngressStatsQueueHighPriBytesread-onlycurrentThe sum of all per queue CIR counts for this queue, which indicates the bytes forwarded for high-priority packets.
1.3.6.1.4.1.1916.1.4.8.2.1.3ColumnextremePortIngressStatsQueueLowPriBytesread-onlycurrentThe sum of all per queue PR counts for this queue, which indicates the bytes forwarded for low-priority packets.
1.3.6.1.4.1.1916.1.4.8.2.1.4ColumnextremePortIngressStatsQueuePercentDroppedread-onlycurrentThe percentage of receive bytes dropped by this queue relative to the total number of bytes input to this queue.
1.3.6.1.4.1.1916.1.4.9TableextremePortEgressRateLimitTablenot-accessiblecurrentPort egress rate limit statistics for a port.
1.3.6.1.4.1.1916.1.4.9.1RowextremePortEgressRateLimitEntrynot-accessiblecurrentAn individual EgressRateLimit Entry.
1.3.6.1.4.1.1916.1.4.9.1.1ColumnextremePortEgressRateLimitTyperead-onlycurrentThe type of the current egress rate setting. A value of 1 signifies that the egress rate limit value is represented by a percentage of the maximum configurable…
1.3.6.1.4.1.1916.1.4.9.1.2ColumnextremePortEgressRateLimitValueread-onlycurrentThe configured egress rate value.
1.3.6.1.4.1.1916.1.4.10TableextremeWiredClientTablenot-accessiblecurrentThis table contains the entries for authenticated Clinets.
1.3.6.1.4.1.1916.1.4.10.1RowextremeWiredClientEntrynot-accessiblecurrentAn entry in the extremeWiredClientTable.
1.3.6.1.4.1.1916.1.4.10.1.1ColumnextremeWiredClientIDread-onlycurrentThe Unique MAC Address of the station for which this address table entry pertains.
1.3.6.1.4.1.1916.1.4.10.1.2ColumnextremeWiredClientStateread-onlycurrentThis attribute shall indicate the current state of the client. The attribute is enumerated as follows: 1 - Authenticated - client is authenticated. 2 - Unauthe…
1.3.6.1.4.1.1916.1.4.10.1.3ColumnextremeWiredClientVLANread-onlycurrentThis is the per-client VLAN which was pushed over by a RADIUS server or other mechanism.
1.3.6.1.4.1.1916.1.4.10.1.4ColumnextremeWiredClientPriorityread-onlycurrentThis is a per-client 802.1p value which was either configured by the RADIUS server or statically through the port configuration table.
1.3.6.1.4.1.1916.1.4.10.1.5ColumnextremeWiredClientAuthTyperead-onlycurrentThis is an indication of what access method was used to authenticated the client.
1.3.6.1.4.1.1916.1.4.10.1.6ColumnextremeWiredClientLastStateChangeTimeread-onlycurrentThis is the sysUpTime of the switch when the clients state changed last
1.3.6.1.4.1.1916.1.4.10.1.7ColumnextremeWiredClientIPread-onlycurrentIP Address of the wired client.
1.3.6.1.4.1.1916.1.5IdentityextremeVCExtreme Virtual Chassis objects
1.3.6.1.4.1.1916.1.5.1TableextremeVCLinkTablenot-accessibledeprecatedA table of information about any neighbouring Extreme Virtual Chassis device. Only contains valid data for ports that are configured to have extremePortSummitl…
1.3.6.1.4.1.1916.1.5.1.1RowextremeVCLinkEntrynot-accessibledeprecatedNeighbour information for a single Summitlink Port.
1.3.6.1.4.1.1916.1.5.1.1.1ColumnextremeVCLinkValidread-onlydeprecatedFlag indicating whether other columns of this table contain data.
1.3.6.1.4.1.1916.1.5.1.1.2ColumnextremeVCLinkDeviceIdread-onlydeprecatedID of the current SummitVC device connected to this Summitlink port.
1.3.6.1.4.1.1916.1.5.1.1.3ColumnextremeVCLinkPortIndexread-onlydeprecatedThe Summitlink subchannel number that the Summit device on the other side of the neighbouring SummitVC will use to reach this device.
1.3.6.1.4.1.1916.1.6IdentityextremeTrapPollExtreme SmartTraps trap-based-polling objects
1.3.6.1.4.1.1916.1.6.1TableextremeSmartTrapRulesTablenot-accessiblecurrentA table of rules that are used to generate extremeSmartTraps.
1.3.6.1.4.1.1916.1.6.1.1RowextremeSmartTrapRulesEntrynot-accessiblecurrentEach row in the table represents a rule.
1.3.6.1.4.1.1916.1.6.1.1.1ColumnextremeSmartTrapRulesIndexread-onlycurrentAn index into the extremeSmartTraps rules table.
1.3.6.1.4.1.1916.1.6.1.1.2ColumnextremeSmartTrapRulesRowStatusread-createcurrentIndicates the status of row.
1.3.6.1.4.1.1916.1.6.1.1.3ColumnextremeSmartTrapRulesDesiredOIDread-createcurrentThe OID for which the rule is desired. When the OID specified by this object undergoes an operation specified by extremeSmartTrapRulesOperation, then an entry …
1.3.6.1.4.1.1916.1.6.1.1.4ColumnextremeSmartTrapRulesSupportedOIDread-onlycurrentThe OID for which this entry is created. This is based on the granularity supported by the agent corresponding to the extremeSmartTrapRulesDesiredOID that the …
1.3.6.1.4.1.1916.1.6.1.1.5ColumnextremeSmartTrapRulesOperationread-createcurrentThe write operations on extremeSmartTrapRulesDesiredOID for which extremeSmartTrapsInstanceEntry should be created.
1.3.6.1.4.1.1916.1.6.1.1.6ColumnextremeSmartTrapRulesTrapDestIndexread-createcurrentA pointer to a row in RMON2's trapDestTable that was created by the management station that defined this rule. Any extremeSmartTraps generated by this agent du…
1.3.6.1.4.1.1916.1.6.2TableextremeSmartTrapInstanceTablenot-accessiblecurrentA table representing containing information about which variables have changed according to the rules defined in extremeSmartTrapRulesTable.
1.3.6.1.4.1.1916.1.6.2.1RowextremeSmartTrapInstanceEntrynot-accessiblecurrentAn entry corresponding to a change in value of one of the OIDs defined in extremeSmartTrapRulesTable. Entries are indexed by a pointer to the relevant row in R…
1.3.6.1.4.1.1916.1.6.2.1.1ColumnextremeSmartTrapInstanceSubindexread-onlycurrentAn additional index into the table of extremeSmartTrap instance data. Each row which has the same OID for the same management station (i.e. same cookie) is ass…
1.3.6.1.4.1.1916.1.6.2.1.2ColumnextremeSmartTrapInstanceRuleread-onlycurrentThe index of the rule from the extremeSmartTrapRulesTable for which this entry was created.
1.3.6.1.4.1.1916.1.6.2.1.3ColumnextremeSmartTrapInstanceChangedOidread-onlycurrentThe OID value that has changed.
1.3.6.1.4.1.1916.1.6.2.1.4ColumnextremeSmartTrapInstanceActualOperationread-onlycurrentThe operation that was recently performed on this extremeSmartTrapInstanceChangedOid.
1.3.6.1.4.1.1916.1.6.2.1.5ColumnextremeSmartTrapInstanceChangeTimeread-onlycurrentThe sysUpTime when this entry was created.
1.3.6.1.4.1.1916.1.6.3ScalarextremeSmartTrapFlushInstanceTableIndexread-writecurrentWhen this object is set, the agent will delete all rows from the extremeSmartTrapInstanceTable which meet the following rules: 1. The InstanceTableIndex is equ…
1.3.6.1.4.1.1916.1.7IdentityextremeQosPolicyExtreme QoS Policy configuration objects
1.3.6.1.4.1.1916.1.7.1ScalarextremeNextAvailableQosRuleIndexread-onlycurrentThe value of the next available QoS Rule index. This object is used by an NMS to select an index value for row-creation in the extremeQosRuleTable. The current…
1.3.6.1.4.1.1916.1.7.2TableextremeQosRuleTablenot-accessiblecurrentTable of QoS policy rules. Entries that duplicate the exact same set of policy conditions are not allowed.
1.3.6.1.4.1.1916.1.7.2.1RowextremeQosRuleEntrynot-accessiblecurrentEntry in table of QoS policy rules
1.3.6.1.4.1.1916.1.7.2.1.1ColumnextremeQosRuleIndexread-createcurrentAn index into the table of QoS policy pattern rules. The index for a manager to use for creating new rows is determined by reading the value of extremeNextAvai…
1.3.6.1.4.1.1916.1.7.2.1.2ColumnextremeQosRuleScoperead-createcurrentThe scope of conditions in which this rule applies. The value 'signaled' means that the policy rule is applied only to QoS signaling messages e.g. RSVP. The va…
1.3.6.1.4.1.1916.1.7.2.1.3ColumnextremeQosRuleDirectionread-createcurrentThe direction in which this rule applies. The value 'forward' means that the rule is applied to data streams in the direction specified by the classification p…
1.3.6.1.4.1.1916.1.7.2.1.4ColumnextremeQosRuleInPortread-createcurrentThe ifIndex value of the physical switch input port for which this rule applies. Rules that indicate an individual value for this object have a lower precedenc…
1.3.6.1.4.1.1916.1.7.2.1.5ColumnextremeQosRuleInPortMaskread-createcurrentThe list of physical switch input ports which further qualifies an IP flow. This object is an octet string with the MSB of octet 0 indicating port 0 and LSB in…
1.3.6.1.4.1.1916.1.7.2.1.6ColumnextremeQosRuleDestAddrStartread-createcurrentThe start of the destination IP address range for which this rule applies.If this object has any value other than the default then this rule takes precedence o…
1.3.6.1.4.1.1916.1.7.2.1.7ColumnextremeQosRuleDestAddrEndread-createcurrentThe end of the destination IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence ov…
1.3.6.1.4.1.1916.1.7.2.1.8ColumnextremeQosRuleSrcAddrStartread-createcurrentThe start of the source IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over …
1.3.6.1.4.1.1916.1.7.2.1.9ColumnextremeQosRuleSrcAddrEndread-createcurrentThe end of the source IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over an…
1.3.6.1.4.1.1916.1.7.2.1.10ColumnextremeQosRuleProtocolread-createcurrentThe IP protocol number for which this rule applies. If this object has any value other than 'any' then this rule takes precedence over any rule that specifies …
1.3.6.1.4.1.1916.1.7.2.1.11ColumnextremeQosRuleDestL4PortStartread-createcurrentThe destination starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 information would be ignored when ma…
1.3.6.1.4.1.1916.1.7.2.1.12ColumnextremeQosRuleSourceL4PortStartread-createcurrentThe source starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matchin…
1.3.6.1.4.1.1916.1.7.2.1.13ColumnextremeQosRuleTosMaskread-createdeprecatedA mask for the incoming IP Type-of-Service field to be applied when matching. The value of 0 means that any incoming IP ToS field is ignored. Only the default …
1.3.6.1.4.1.1916.1.7.2.1.14ColumnextremeQosRuleTosMatchread-createdeprecatedIf the value of the incoming IP Type-of-Service field, after applying a mask of extremeQosRuleTosMask, is this value then this rule is applied. Only the defaul…
1.3.6.1.4.1.1916.1.7.2.1.15ColumnextremeQosRuleQosProfileIndexread-createcurrentA pointer into the extremeQosProfileTable indicating the QoS treatment and actions to be applied to traffic matching this rule. A value of 0 means that this tr…
1.3.6.1.4.1.1916.1.7.2.1.16ColumnextremeQosRuleOwnerread-createcurrentIndicates the identity of the manager that configured this entry.
1.3.6.1.4.1.1916.1.7.2.1.17ColumnextremeQosRuleRowStatusread-createcurrentThe row status for this QoS rule. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) n…
1.3.6.1.4.1.1916.1.7.2.1.18ColumnextremeQosRuleDestL4PortEndread-createcurrentThe destination last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all layer 4 information would be…
1.3.6.1.4.1.1916.1.7.2.1.19ColumnextremeQosRuleSourceL4PortEndread-createcurrentThe source last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all layer 4 information would be igno…
1.3.6.1.4.1.1916.1.7.2.1.20ColumnextremeQosRulePrecedenceread-createcurrentThe precedence used to select one rule over potentially multiple rules that might match an L3/L4 flow. The rule with highest precedence takes precedence over a…
1.3.6.1.4.1.1916.1.7.2.1.21ColumnextremeQosRuleCounterread-onlycurrent
1.3.6.1.4.1.1916.1.7.2.1.22ColumnextremeQosRuleNameread-createcurrentA unique Qos rule name. If this is not specified then the system generates one automatically.
1.3.6.1.4.1.1916.1.7.3TableextremeQosCapabilitiesTablenot-accessiblecurrentTable of per-port QoS policy capabilities. An entry only exists in this table for ifTable entries representing physical ports. On a modular system with mixed c…
1.3.6.1.4.1.1916.1.7.3.1RowextremeQosCapabilitiesEntrynot-accessiblecurrentEntry in table of QoS policy capabilities for a given switch port.
1.3.6.1.4.1.1916.1.7.3.1.1ColumnextremeQosCapMarkIpTosCapableread-onlycurrentThis port is capable of supporting policies that involve the changing of IP TOS octet values.
1.3.6.1.4.1.1916.1.7.3.1.2ColumnextremeQosCapMatchIpTosCapableread-onlycurrentThis port is capable of supporting policies that involve packet classification based on matching of IP TOS octet values.
1.3.6.1.4.1.1916.1.7.4ScalarextremeQosClearIPFdbread-writecurrentSetting this to true will clear the hardware IP flow table.
1.3.6.1.4.1.1916.1.7.5ScalarextremeQosClearFdbread-writecurrentSetting this to true will clear the hardware MAC flow table.
1.3.6.1.4.1.1916.1.8IdentityextremeDlcsExtreme Dynamic-Link Context System (DLCS) status objects
1.3.6.1.4.1.1916.1.8.1ScalarextremeDlcsEnableread-writecurrentSetting this to true will allow the agent to start collecting DLCS binding information.
1.3.6.1.4.1.1916.1.8.2ScalarextremeDlcsNetbiosEnableread-writecurrentSetting this to true will allow the agent to start collecting DLCS binding information using the NetBios protocol.
1.3.6.1.4.1.1916.1.8.3ScalarextremeDlcsKerberos5Enableread-writecurrentSetting this to true will allow the agent to start collecting DLCS binding information using the Kerberos V5 protocol.
1.3.6.1.4.1.1916.1.8.4ScalarextremeDlcsRsvpEnableread-writecurrentSetting this to true will allow the agent to start collecting DLCS binding information using the RSVP protocol.
1.3.6.1.4.1.1916.1.8.5ScalarextremeDlcsDnsEnableread-writecurrentSetting this to true will allow the agent to start collecting DLCS binding information using the DNS protocol.
1.3.6.1.4.1.1916.1.8.6TableextremeDlcsBindingTablenot-accessiblecurrentTable of DLCS Binding information. Entries are added and deleted by the agent based on information gathered from the local network environment. Multiple entrie…
1.3.6.1.4.1.1916.1.8.6.1RowextremeDlcsBindingEntrynot-accessiblecurrentEntry in table of DLCS bindings.
1.3.6.1.4.1.1916.1.8.6.1.1ColumnextremeDlcsBindingIndexread-onlycurrentAn index into this table, chosen by the agent. This has no significance to the manager beyond its uniqueness within this agent.
1.3.6.1.4.1.1916.1.8.6.1.2ColumnextremeDlcsBindingTyperead-onlycurrentThe type of binding expressed here. A given bit is set if DLCS has detected that the two relevant items are bound together. e.g. an entry with application2user…
1.3.6.1.4.1.1916.1.8.6.1.3ColumnextremeDlcsBindingSourceread-onlycurrentThe source of the information binding.
1.3.6.1.4.1.1916.1.8.6.1.4ColumnextremeDlcsBindingUserread-onlycurrentThe User name detected by DLCS. A string of length zero indicates no valid User name has been detected for this binding.
1.3.6.1.4.1.1916.1.8.6.1.5ColumnextremeDlcsBindingGroupread-onlycurrentThe Group name detected by DLCS. A string of length zero indicates no valid Group name has been detected for this binding.
1.3.6.1.4.1.1916.1.8.6.1.6ColumnextremeDlcsBindingApplicationread-onlycurrentThe Application name detected by DLCS. A string of length zero indicates no valid Application name has been detected for this binding.
1.3.6.1.4.1.1916.1.8.6.1.7ColumnextremeDlcsBindingHostread-onlycurrentThe Host name detected by DLCS. A string of length zero indicates no valid Host name has been detected for this binding.
1.3.6.1.4.1.1916.1.8.6.1.8ColumnextremeDlcsBindingIpAddressread-onlycurrentThe IP address detected by DLCS. A value of 0.0.0.0 indicates no valid IP address has been detected for this binding.
1.3.6.1.4.1.1916.1.8.6.1.9ColumnextremeDlcsBindingPhysPortread-onlycurrentThe physical port number (ifIndex) detected by DLCS. This is valid in all bindings.
1.3.6.1.4.1.1916.1.8.6.1.10ColumnextremeDlcsBindingUpdateTimeread-onlycurrentThe value of sysUpTime when this entry was last updated.
1.3.6.1.4.1.1916.1.10IdentityextremeFileTransferExtreme File transfer objects
1.3.6.1.4.1.1916.1.10.1NodeextremeFileTransferGroup
1.3.6.1.4.1.1916.1.10.1.1ScalarextremeFileTransferNextAvailableIndexread-onlycurrentThe index of the next free row in the extremeFileTransferTable.
1.3.6.1.4.1.1916.1.10.1.2TableextremeFileTransferTablenot-accessiblecurrentA table of pending and completed file transfers.
1.3.6.1.4.1.1916.1.10.1.2.1RowextremeFileTransferEntrynot-accessiblecurrentA table entry containing information on a pending or completed file transfer.
1.3.6.1.4.1.1916.1.10.1.2.1.1ColumnextremeFileTransferIndexnot-accessiblecurrentAn index into the file transfer table.
1.3.6.1.4.1.1916.1.10.1.2.1.2ColumnextremeFileTransferServerAddressread-createcurrentThis is the address of the TFTP server from which to download the image or configuration or upload the configuration.
1.3.6.1.4.1.1916.1.10.1.2.1.3ColumnextremeFileTransferFileNameread-createcurrentThis is the name of the file to be downloaded or uploaded.
1.3.6.1.4.1.1916.1.10.1.2.1.4ColumnextremeFileTransferOperationread-createcurrentIndication of the file transfer operation. This object allows configuration of uploads and/or downloads either immediately or at a scheduled time. A value of d…
1.3.6.1.4.1.1916.1.10.1.2.1.5ColumnextremeFileTransferScheduledTimeread-createcurrentThe time of the day at which the file transfer operation should be initiated. This object is meaningful only for scheduled file transfers. field octets content…
1.3.6.1.4.1.1916.1.10.1.2.1.6ColumnextremeFileTransferStartAdminStatusread-createcurrentWriting to this object initiates the upload/download or schedules one. The extremeFileTransferStartOperStatus object should be checked before attempting to set…
1.3.6.1.4.1.1916.1.10.1.2.1.7ColumnextremeFileTransferStartOperStatusread-onlycurrentThe agent sets this value to reflect the current status of the file transfer operation. Reading this object is meaningful only if the extremeFileTransferRowSta…
1.3.6.1.4.1.1916.1.10.1.2.1.8ColumnextremeFileTransferLastExecutionStatusread-onlycurrentThe status of the last file transfer operation. This value is returned as statusUnknown(1) until the extremeFileTransferRowStatus is set to active(1) or when t…
1.3.6.1.4.1.1916.1.10.1.2.1.9ColumnextremeFileTransferOwnerread-createcurrentIndicates the identity of the manager that configured this file transfer entry.
1.3.6.1.4.1.1916.1.10.1.2.1.10ColumnextremeFileTransferRowStatusread-createcurrentThe status of this table entry. This object can not be modified while the extremeFileTransferStatus is inProgress(1). Setting this object to notInService(2) or…
1.3.6.1.4.1.1916.1.11IdentityextremeRtStatsExtreme real time stats related objects
1.3.6.1.4.1.1916.1.11.1TableextremeRtStatsTablenot-accessiblecurrentA list of real time stats entries.
1.3.6.1.4.1.1916.1.11.1.1RowextremeRtStatsEntrynot-accessiblecurrentThe last sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the RMON historyControlEntry which set up the paramet…
1.3.6.1.4.1.1916.1.11.1.1.1ColumnextremeRtStatsIndexread-onlycurrentThe history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of hi…
1.3.6.1.4.1.1916.1.11.1.1.2ColumnextremeRtStatsIntervalStartread-onlycurrentThe value of sysUpTime at the start of the interval over which this sample was measured.
1.3.6.1.4.1.1916.1.11.1.1.3ColumnextremeRtStatsCRCAlignErrorsread-onlycurrentThe number of packets received during the last sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets…
1.3.6.1.4.1.1916.1.11.1.1.4ColumnextremeRtStatsUndersizePktsread-onlycurrentThe number of packets received during the last sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were …
1.3.6.1.4.1.1916.1.11.1.1.5ColumnextremeRtStatsOversizePktsread-onlycurrentThe number of packets received during the last sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were o…
1.3.6.1.4.1.1916.1.11.1.1.6ColumnextremeRtStatsFragmentsread-onlycurrentThe total number of packets received during the last sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets…
1.3.6.1.4.1.1916.1.11.1.1.7ColumnextremeRtStatsJabbersread-onlycurrentThe number of packets received during the last sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had e…
1.3.6.1.4.1.1916.1.11.1.1.8ColumnextremeRtStatsCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment during this sampling interval.
1.3.6.1.4.1.1916.1.11.1.1.9ColumnextremeRtStatsTotalErrorsread-onlycurrentThe total number of errors on this Ethernet segment during this sampling interval. This is the sum of the crc, fragments, jabbers and collisions counters over …
1.3.6.1.4.1.1916.1.11.1.1.10ColumnextremeRtStatsUtilizationread-onlycurrentThe best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
1.3.6.1.4.1.1916.1.12IdentityextremeEsrpExtreme Standby Routing Protocol information
1.3.6.1.4.1.1916.1.12.2TableextremeEsrpTablenot-accessiblecurrentThis table contains ESRP information for this device.
1.3.6.1.4.1.1916.1.12.2.1RowextremeEsrpEntrynot-accessiblecurrentAn individual entry of this table contains ESRP information for a given vlan belonging to a given ESRP group.
1.3.6.1.4.1.1916.1.12.2.1.1ColumnextremeEsrpVlanIfIndexaccessible-for-notifycurrentAny index to this table has a value that is the same as the ifIndex of one of the vlans present in the ifTable.
1.3.6.1.4.1.1916.1.12.2.1.2ColumnextremeEsrpGroupaccessible-for-notifycurrentIndicates a gateway addresses this router backs up. Any gateway address can be backed up by a group of routers with one as the master and the others as backup.…
1.3.6.1.4.1.1916.1.12.2.1.3ColumnextremeEsrpRowStatusread-createcurrentThe status of this entry.
1.3.6.1.4.1.1916.1.12.2.1.4ColumnextremeEsrpNetAddressread-onlycurrentThe IP/IPX address of this vlan. This entry is null if no address has been assigned to the vlan.
1.3.6.1.4.1.1916.1.12.2.1.5ColumnextremeEsrpStateread-onlycurrentThis indicates the ESRP state of this ESRP router.
1.3.6.1.4.1.1916.1.12.2.1.6ColumnextremeEsrpPriorityread-createcurrentThe priority which would be advertised by this router for determining the esrp master.
1.3.6.1.4.1.1916.1.12.2.1.7ColumnextremeEsrpElectionAlgorithmread-createcurrentThe algorithm to use in selecting the esrp master.
1.3.6.1.4.1.1916.1.12.2.1.8ColumnextremeEsrpHelloTimerread-createcurrentThe time interval for exchanging hello messages.
1.3.6.1.4.1.1916.1.12.2.1.9ColumnextremeEsrpActivePortsread-onlycurrentThe number of physical ports that are in this vlan.
1.3.6.1.4.1.1916.1.12.2.1.10ColumnextremeEsrpTrackedActivePortsread-onlycurrentThe total number of ports belonging to the vlans that are tracked by this esrp router.
1.3.6.1.4.1.1916.1.12.2.1.11ColumnextremeEsrpTrackedIpRoutesread-onlycurrentThe total number of ip routes that are tracked by this esrp router.
1.3.6.1.4.1.1916.1.12.2.1.12ColumnextremeEsrpTrackedPingsread-onlycurrentThe total number of ip addresses that are ping-tracked by this esrp router.
1.3.6.1.4.1.1916.1.12.2.1.13ColumnextremeEsrpNumTransitionsToMasterread-onlycurrentThe total number of transitions to Master by this esrp router.
1.3.6.1.4.1.1916.1.12.2.1.14ColumnextremeEsrpNumTransitionsToSlaveread-onlycurrentThe total number of transitions to Slave by this esrp router.
1.3.6.1.4.1.1916.1.12.2.1.15ColumnextremeEsrpInternalActivePortsread-onlycurrentThe number of internal physical ports that are in this vlan.
1.3.6.1.4.1.1916.1.12.3TableextremeEsrpNeighborTablenot-accessiblecurrentThis table contains ESRP information received from the ESRP neighbors of this device.
1.3.6.1.4.1.1916.1.12.3.1RowextremeEsrpNeighborEntrynot-accessiblecurrentEach individual entry of this table contains ESRP information of one ESRP neighbor.
1.3.6.1.4.1.1916.1.12.3.1.1ColumnextremeEsrpNeighborMacAddressnot-accessiblecurrentMac address of other esrp routers that backup this gateway address.
1.3.6.1.4.1.1916.1.12.3.1.2ColumnextremeEsrpNeighborGroupnot-accessiblecurrentIndicates a gateway addresses this router backs up. Any gateway address can be backed up by a group of routers with one as the master and the others as backup.…
1.3.6.1.4.1.1916.1.12.3.1.3ColumnextremeEsrpNeighborNetAddressread-onlycurrentThe network layer address of this router. This may be null if no address was assigned.
1.3.6.1.4.1.1916.1.12.3.1.4ColumnextremeEsrpNeighborStateread-onlycurrentState of the esrp neighbor.
1.3.6.1.4.1.1916.1.12.3.1.5ColumnextremeEsrpNeighborPriorityread-onlycurrentThe priority reported by this esrp neighbor.
1.3.6.1.4.1.1916.1.12.3.1.6ColumnextremeEsrpNeighborElectionAlgorithmread-onlycurrentThe algorithm to use in selecting the esrp master reported by this esrp neighbor.
1.3.6.1.4.1.1916.1.12.3.1.7ColumnextremeEsrpNeighborHelloTimerread-onlycurrentThe time interval for exchanging hello messages configured at this esrp neighbor.
1.3.6.1.4.1.1916.1.12.3.1.8ColumnextremeEsrpNeighborActivePortsread-onlycurrentThe number of physical ports that are in present in the neighbor's vlan.
1.3.6.1.4.1.1916.1.12.3.1.9ColumnextremeEsrpNeighborTrackedActivePortsread-onlycurrentThe total number of ports belonging to the vlans that are tracked by this esrp neighbor.
1.3.6.1.4.1.1916.1.12.3.1.10ColumnextremeEsrpNeighborTrackedIpRoutesread-onlycurrentThe total number of ip routes that are tracked by this esrp neighbor.
1.3.6.1.4.1.1916.1.12.3.1.11ColumnextremeEsrpNeighborInternalActivePortsread-onlycurrentThe number of internal ports that are in present in the neighbor.
1.3.6.1.4.1.1916.1.12.4TableextremeEsrpTrackVlanTablenot-accessiblecurrentA table containing information on the VLANs tracked by this ESRP router.
1.3.6.1.4.1.1916.1.12.4.1RowextremeEsrpTrackVlanEntrynot-accessiblecurrentAn entry in the table of tracked VLAN information.
1.3.6.1.4.1.1916.1.12.4.1.1ColumnextremeEsrpTrackVlanIfIndexnot-accessiblecurrentThe ifIndex of the tracked vlan.
1.3.6.1.4.1.1916.1.12.4.1.2ColumnextremeEsrpTrackVlanRowStatusread-createcurrentThe status of this entry.
1.3.6.1.4.1.1916.1.12.5TableextremeEsrpTrackIpRouteTablenot-accessiblecurrentA table containing information on the IP routes tracked by this ESRP router.
1.3.6.1.4.1.1916.1.12.5.1RowextremeEsrpTrackIpRouteEntrynot-accessiblecurrentAn entry in the table of tracked IP routes information.
1.3.6.1.4.1.1916.1.12.5.1.1ColumnextremeEsrpTrackIpRouteIpAddressnot-accessiblecurrentThe ifIndex of the tracked vlan.
1.3.6.1.4.1.1916.1.12.5.1.2ColumnextremeEsrpTrackIpRouteNetMasknot-accessiblecurrentThe ifIndex of the tracked vlan.
1.3.6.1.4.1.1916.1.12.5.1.3ColumnextremeEsrpTrackIpRouteRowStatusread-createcurrentThe status of this entry.
1.3.6.1.4.1.1916.1.12.6TableextremeEsrpPortTablenot-accessiblecurrentA table containing information on the ports belonging to the ESRP vlans on this router.
1.3.6.1.4.1.1916.1.12.6.1RowextremeEsrpPortEntrynot-accessiblecurrentAn entry in the table of ESRP port information.
1.3.6.1.4.1.1916.1.12.6.1.1ColumnextremeEsrpPortIfIndexnot-accessiblecurrentThe ifIndex of the physical port that is part of the vlan specified by the extremeEsrpVlanIfIndex.
1.3.6.1.4.1.1916.1.12.6.1.2ColumnextremeEsrpPortStateread-writecurrentIndicates if esrp is enabled or disabled on this port.
1.3.6.1.4.1.1916.1.13IdentityextremeEdpExtreme Discovery Protocol information
1.3.6.1.4.1.1916.1.13.2TableextremeEdpTablenot-accessiblecurrentThis table contains EDP information of this device.
1.3.6.1.4.1.1916.1.13.2.1RowextremeEdpEntrynot-accessiblecurrentAn entry in the table of EDP information of this device.
1.3.6.1.4.1.1916.1.13.2.1.1ColumnextremeEdpPortIfIndexaccessible-for-notifycurrentThe ifIndex of the physical port on which this entry was discovered via edp.
1.3.6.1.4.1.1916.1.13.2.1.2ColumnextremeEdpNeighborIdaccessible-for-notifycurrentThe identifier associated with the neighbor.
1.3.6.1.4.1.1916.1.13.2.1.3ColumnextremeEdpNeighborNameread-onlycurrentThe identifier associated with the neighbor.
1.3.6.1.4.1.1916.1.13.2.1.4ColumnextremeEdpNeighborSoftwareVersionread-onlycurrentThe identifier associated with the neighbor.
1.3.6.1.4.1.1916.1.13.2.1.5ColumnextremeEdpNeighborSlotread-onlycurrentThe slot on which this neighbor received the edp message.
1.3.6.1.4.1.1916.1.13.2.1.6ColumnextremeEdpNeighborPortread-onlycurrentThe port on which this neighbor received the edp message.
1.3.6.1.4.1.1916.1.13.2.1.7ColumnextremeEdpEntryAgeread-onlycurrentThe time in seconds since this entry was last updated.
1.3.6.1.4.1.1916.1.13.3TableextremeEdpNeighborTablenot-accessiblecurrentThis table contains EDP neighbor information.
1.3.6.1.4.1.1916.1.13.3.1RowextremeEdpNeighborEntrynot-accessiblecurrentAn entry in the table of EDP Neighbor information.
1.3.6.1.4.1.1916.1.13.3.1.1ColumnextremeEdpNeighborVlanNamenot-accessiblecurrentThe name of the vlan configured on and reported by this edp neighbor.
1.3.6.1.4.1.1916.1.13.3.1.2ColumnextremeEdpNeighborVlanIdread-onlycurrentThe vlan identifier associated with this vlan configured on this neighbor.
1.3.6.1.4.1.1916.1.13.3.1.3ColumnextremeEdpNeighborVlanIpAddressread-onlycurrentThe ip address of the reported vlan.
1.3.6.1.4.1.1916.1.13.4TableextremeEdpPortTablenot-accessiblecurrent
1.3.6.1.4.1.1916.1.13.4.1RowextremeEdpPortEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.13.4.1.1ColumnextremeEdpPortStateread-writecurrentIndicates if edp is enabled or disabled on this port.
1.3.6.1.4.1.1916.1.14IdentityextremeSlbExtreme Server Load Balancing information
1.3.6.1.4.1.1916.1.14.1TableextremeSlbRealServerTablenot-accessiblecurrentThis table contains information about a real server. It currently indicates only whether the server is up.
1.3.6.1.4.1.1916.1.14.1.1RowextremeSlbRealServerEntrynot-accessiblecurrentAn entry in the table of real server information.
1.3.6.1.4.1.1916.1.14.1.1.1ColumnextremeSlbRealServerIpAddressnot-accessiblecurrentThe IP address of the real server.
1.3.6.1.4.1.1916.1.14.1.1.2ColumnextremeSlbRealServerUpread-writecurrentIndicates whether the server is operational. If the server is up, the load balancer may send traffic to applications on the server. If the server is not up, th…
1.3.6.1.4.1.1916.1.14.2TableextremeSlbRealAppTablenot-accessiblecurrentThis table contains information about an application on a particular TCP or UDP port of a real server. It currently indicates only whether the application is u…
1.3.6.1.4.1.1916.1.14.2.1RowextremeSlbRealAppEntrynot-accessiblecurrentAn entry in the table of real server application information.
1.3.6.1.4.1.1916.1.14.2.1.1ColumnextremeSlbRealAppIpAddressnot-accessiblecurrentThe IP address of the real server.
1.3.6.1.4.1.1916.1.14.2.1.2ColumnextremeSlbRealAppPortnot-accessiblecurrentThe TCP or UDP port on the real server that the application is using.
1.3.6.1.4.1.1916.1.14.2.1.3ColumnextremeSlbRealAppUpread-writecurrentIndicates whether the application is operational. If the application is up, the load balancer may send traffic to it. If the application is not up, the load ba…
1.3.6.1.4.1.1916.1.15IdentityextremeOspfExtreme specific OSPF information
1.3.6.1.4.1.1916.1.15.1TableextremeOspfInterfaceTablenot-accessiblecurrentThis table contains Extreme Networks specific information about OSPF interfaces.
1.3.6.1.4.1.1916.1.15.1.1RowextremeOspfInterfaceEntrynot-accessiblecurrentAn entry in the table containing Extreme Networks specific OSPF interface information.
1.3.6.1.4.1.1916.1.15.1.1.1ColumnextremeOspfAreaIdread-writecurrentA 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
1.3.6.1.4.1.1916.1.15.1.1.2ColumnextremeOspfInterfacePassiveread-writecurrentIndicates whether the OSPF interface on this Vlan is Passive or not. Passive interfaces do not send routing updates. A true value indicates that the interface …
1.3.6.1.4.1.1916.1.15.1.1.3ColumnextremeOspfInterfaceStatusread-createcurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.1916.1.16IdentityextremeFdbExtreme FDB and IP FDB tables.
1.3.6.1.4.1.1916.1.16.1TableextremeFdbMacFdbTablenot-accessiblecurrentA table that contains information about the hardware MAC FDB table.
1.3.6.1.4.1.1916.1.16.1.1RowextremeFdbMacFdbEntrynot-accessiblecurrentAn entry in the table of MAC FDB information.
1.3.6.1.4.1.1916.1.16.1.1.1ColumnextremeFdbMacFdbVlanIfIndexnot-accessiblecurrentThe ifIndex of the Vlan on which this mac is learned.
1.3.6.1.4.1.1916.1.16.1.1.2ColumnextremeFdbMacFdbSequenceNumbernot-accessiblecurrentThe sequence number of this FDB entry in the forwarding database.
1.3.6.1.4.1.1916.1.16.1.1.3ColumnextremeFdbMacFdbMacAddressread-onlycurrentA MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.1916.1.16.1.1.4ColumnextremeFdbMacFdbPortIfIndexread-onlycurrentEither the value '0', or the IfIndex of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress…
1.3.6.1.4.1.1916.1.16.1.1.5ColumnextremeFdbMacFdbStatusread-onlycurrentThe status of this entry. This is the value of dot1dTpFdbStatus in RFC1493.
1.3.6.1.4.1.1916.1.16.2TableextremeFdbIpFdbTablenot-accessiblecurrentA table that contains information about the hardware IP FDB table.
1.3.6.1.4.1.1916.1.16.2.1RowextremeFdbIpFdbEntrynot-accessiblecurrentAn entry in the table of IP FDB information.
1.3.6.1.4.1.1916.1.16.2.1.1ColumnextremeFdbIpFdbSequenceNumbernot-accessiblecurrentThe sequence number of this entry in the IP FDB
1.3.6.1.4.1.1916.1.16.2.1.2ColumnextremeFdbIpFdbIPAddressread-onlycurrentThe IP Address of the IP FDB entry
1.3.6.1.4.1.1916.1.16.2.1.3ColumnextremeFdbIpFdbMacAddressread-onlycurrentThe MAC address corresponding to the IP Address.
1.3.6.1.4.1.1916.1.16.2.1.4ColumnextremeFdbIpFdbVlanIfIndexread-onlycurrentThe ifIndex of the Vlan on which this ip is learned
1.3.6.1.4.1.1916.1.16.2.1.5ColumnextremeFdbIpFdbPortIfIndexread-onlycurrentThe IfIndex of the port on which this entry was learned
1.3.6.1.4.1.1916.1.16.3TableextremeFdbPermFdbTablenot-accessiblecurrentThis table contains information on the secure-mac permanent FDB entries. It may later be extended to display other types of permanent FDB entries.
1.3.6.1.4.1.1916.1.16.3.1RowextremeFdbPermFdbEntrynot-accessiblecurrentAn entry in the table of secure-mac permanent FDB information.
1.3.6.1.4.1.1916.1.16.3.1.1ColumnextremeFdbPermFdbFilterNumread-onlycurrentThis object always returns 1. In future, it may be used to provide additional capability.
1.3.6.1.4.1.1916.1.16.3.1.2ColumnextremeFdbPermFdbMacAddressread-onlycurrentThe is the MAC Address to which this FDB entry pertains.
1.3.6.1.4.1.1916.1.16.3.1.3ColumnextremeFdbPermFdbVlanIdread-onlycurrentThe VLAN ID of the VLAN to which this FDB entry pertains.
1.3.6.1.4.1.1916.1.16.3.1.4ColumnextremeFdbPermFdbPortListread-createcurrentThis is the list of port(s) on which the given MAC Address is configured Note that this port list is constructed assuming there are as many ports per slot as g…
1.3.6.1.4.1.1916.1.16.3.1.5ColumnextremeFdbPermFdbFlagsread-createcurrentThis object contains the flags associated with the FDB entry. The flags are similar to those displayed on the device Command Line Interface. At present, only t…
1.3.6.1.4.1.1916.1.16.3.1.6ColumnextremeFdbPermFdbStatusread-createcurrentThe status of this entry as per standard RowStatus conventions. Note however, that createAndWait and notInService states are not supported.
1.3.6.1.4.1.1916.1.16.5TableextremeFdbMacFdbCounterTablenot-accessiblecurrentA table that contains change counters for the Operational FDB. Each entry in the table corresponds to an individual port. Whenever a change occurs to the opera…
1.3.6.1.4.1.1916.1.16.5.1RowextremeFdbMacFdbCounterEntrynot-accessiblecurrentAn entry in the table of MAC FDB change counters.
1.3.6.1.4.1.1916.1.16.5.1.1ColumnextremeFdbMacFdbCounterPortIfIndexnot-accessiblecurrentThe ifIndex of the Port for which the counte applies.
1.3.6.1.4.1.1916.1.16.5.1.2ColumnextremeFdbMacFdbCounterValueread-onlycurrentThe count of the number of FDB changes for the given port since the counter was last reset.
1.3.6.1.4.1.1916.1.17IdentityextremeStpExtreme STP extensions
1.3.6.1.4.1.1916.1.17.1TableextremeStpDomainTablenot-accessiblecurrentThis table contains STP information per STP domain.
1.3.6.1.4.1.1916.1.17.1.1RowextremeStpDomainEntrynot-accessiblecurrentAn entry in the extremeStpDomain Table.
1.3.6.1.4.1.1916.1.17.1.1.1ColumnextremeStpDomainStpdInstanceaccessible-for-notifycurrentThe unique identifier of this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.2ColumnextremeStpDomainStpdNameread-onlycurrentThe name associated with this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.3ColumnextremeStpDomainStpEnabledread-onlycurrentThe Enabled/Disabled state of STP on this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.4ColumnextremeStpDomainRstpEnabledread-onlycurrentThe Enabled/Disabled state of Rapid STP on this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.5ColumnextremeStpDomainStpdTagread-onlycurrentThe StpdId of this STP domain which appears as the 802.1Q tag. Therefore, it must be the VLAN tag of one of the wholly-contained VLANs of this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.6ColumnextremeStpDomainNumPortsread-onlycurrentThe number of physical ports belonging to this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.7ColumnextremeStpDomainBridgeIdread-onlycurrentThe bridge identifier of this bridge for this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.8ColumnextremeStpDomainBridgePriorityread-onlycurrentThe bridge priority of this bridge for this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.9ColumnextremeStpDomainDesignatedRootread-onlycurrentThe root bridge identifier for this STP domain as determined by the STP running on this bridge for this STP domain
1.3.6.1.4.1.1916.1.17.1.1.10ColumnextremeStpDomainRootPortIfIndexread-onlycurrentThe port ifIndex of the root port of this bridge for this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.11ColumnextremeStpDomainRootCostread-onlycurrentThe cost of the path from this bridge to the root bridge of this STP domain
1.3.6.1.4.1.1916.1.17.1.1.12ColumnextremeStpDomainRRFailoverEnabledread-onlycurrentThe Enabled/Disabled state of Rapid Root Failover for this bridge on this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.13ColumnextremeStpDomainMaxAgeread-onlycurrentThe maximum allowable age, in units of hundredths of a second, of STP information learned by this bridge for this STP domain, after which it is discarded. This…
1.3.6.1.4.1.1916.1.17.1.1.14ColumnextremeStpDomainHelloTimeread-onlycurrentThe time, in hundredths of a second, between successive transmissions of Configuration BPDUs when this bridge is(or is trying to become) the root bridge for th…
1.3.6.1.4.1.1916.1.17.1.1.15ColumnextremeStpDomainForwardDelayread-onlycurrentThe forward delay time, in hundredths of a second, currently being used by this bridge on this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.16ColumnextremeStpDomainBridgeMaxAgeread-onlycurrentThis is the value of MaxAge used by all other bridges in this STP domain when this bridge is the root bridge.
1.3.6.1.4.1.1916.1.17.1.1.17ColumnextremeStpDomainBridgeHelloTimeread-onlycurrentThis is the value of HelloTime used by all other bridges in this STP domain when this bridge is the root bridge.
1.3.6.1.4.1.1916.1.17.1.1.18ColumnextremeStpDomainBridgeForwardDelayread-onlycurrentThis is the value of ForwardDelay used by all other bridges in this STP domain when this bridge is the root bridge.
1.3.6.1.4.1.1916.1.17.1.1.19ColumnextremeStpDomainHoldTimeread-onlycurrentThis is the Hold Time, in hundredths of a second, for this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.20ColumnextremeStpDomainTopChangesread-onlycurrentThe number of topology changes detected by this bridge for this STP domain since the management entity was initialized or reset.
1.3.6.1.4.1.1916.1.17.1.1.21ColumnextremeStpDomainTimeSinceTopologyChangeread-onlycurrentThe time, in hundredths of a second, since a topology change was last detected by this bridge for this STP domain.
1.3.6.1.4.1.1916.1.17.1.1.22ColumnextremeStpDomainRowStatusread-onlycurrentThe status of this entry, as per standard RowStatus conventions.
1.3.6.1.4.1.1916.1.17.2TableextremeStpPortTablenot-accessiblecurrentThis table contains port-specific information per STP domain.
1.3.6.1.4.1.1916.1.17.2.1RowextremeStpPortEntrynot-accessiblecurrentAn entry in the extremeStpPort table.
1.3.6.1.4.1.1916.1.17.2.1.1ColumnextremeStpPortPortIfIndexnot-accessiblecurrentThe ifIndex of the physical port for which this entry contains STP information.
1.3.6.1.4.1.1916.1.17.2.1.2ColumnextremeStpPortStpEnabledread-onlycurrentThe enabled/disabled state of this STP instance on this port.
1.3.6.1.4.1.1916.1.17.2.1.3ColumnextremeStpPortPortModeread-onlycurrentThe port mode of this port in this STP domain.
1.3.6.1.4.1.1916.1.17.2.1.4ColumnextremeStpPortPortStateread-onlycurrentThe port state of this port in this STP domain.
1.3.6.1.4.1.1916.1.17.2.1.5ColumnextremeStpPortPortPriorityread-onlycurrentThe port priority of this port in this STP domain.
1.3.6.1.4.1.1916.1.17.2.1.6ColumnextremeStpPortPortIdread-onlycurrentThe port identifier of this port in this STP domain.
1.3.6.1.4.1.1916.1.17.2.1.7ColumnextremeStpPortPathCostread-onlycurrentThe path cost of this port for this STP domain.
1.3.6.1.4.1.1916.1.17.2.1.8ColumnextremeStpPortDesignatedCostread-onlycurrentThe path cost, for this STP domain, of the Designated Port of the segment connected to this port.
1.3.6.1.4.1.1916.1.17.2.1.9ColumnextremeStpPortDesignatedRootread-onlycurrentThe root bridge identifier, for this STP domain, that is sent in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which this por…
1.3.6.1.4.1.1916.1.17.2.1.10ColumnextremeStpPortDesignatedBridgeread-onlycurrentThe bridge identifier for the bridge considered to be the Designated Bridge, in this STP domain, for the segment connected to this port.
1.3.6.1.4.1.1916.1.17.2.1.11ColumnextremeStpPortDesignatedPortread-onlycurrentThe port identifier of the Designated Port on this port's segment, for this STP domain.
1.3.6.1.4.1.1916.1.17.2.1.12ColumnextremeStpPortRowStatusread-onlycurrentThe status of this entry, as per standard RowStatus conventions.
1.3.6.1.4.1.1916.1.17.3TableextremeStpVlanPortTablenot-accessiblecurrentThis table contains information of the ports belonging to a STP domain on a per VLAN basis.
1.3.6.1.4.1.1916.1.17.3.1RowextremeStpVlanPortEntrynot-accessiblecurrentAn entry in the extremeStpVlanPort table.
1.3.6.1.4.1.1916.1.17.3.1.1ColumnextremeStpVlanPortPortMaskread-onlycurrentThe list of ports in this STP domain and in this VLAN.
1.3.6.1.4.1.1916.1.17.3.1.2ColumnextremeStpVlanPortRowStatusread-onlycurrentThe status of this entry, as per standard RowStatus conventions.
1.3.6.1.4.1.1916.1.17.4NodeextremeStpTraps
1.3.6.1.4.1.1916.1.17.4.0NodeextremeStpTrapsPrefix
1.3.6.1.4.1.1916.1.17.4.0.1NotificationextremeStpEdgePortBlockedcurrentThe extremeStpEdgePortBlocked notification is generated when the STP's edge port is Blocked due to the misconfiguration
1.3.6.1.4.1.1916.1.18IdentityextremeEapsEthernet Automatic Protection Switching information
1.3.6.1.4.1.1916.1.18.1TableextremeEapsTablenot-accessiblecurrentThis table contains EAPS information about all EAPS domains on this device.
1.3.6.1.4.1.1916.1.18.1.1RowextremeEapsEntrynot-accessiblecurrentAn individual entry of this table contains EAPS information related to that EAPS domain.
1.3.6.1.4.1.1916.1.18.1.1.1ColumnextremeEapsNameread-onlycurrentThe EAPS domain name.
1.3.6.1.4.1.1916.1.18.1.1.2ColumnextremeEapsModeread-onlycurrentThis indicates the mode of the EAPS domain.
1.3.6.1.4.1.1916.1.18.1.1.3ColumnextremeEapsStateread-onlycurrentThis indicates the current EAPS state of this EAPS domain.
1.3.6.1.4.1.1916.1.18.2ScalarextremeEapsPrevStateread-onlycurrentThis indicates the previous EAPS state of this EAPS domain. Used in state change traps information.
1.3.6.1.4.1.1916.1.20IdentityextremePOSMibExtreme POS objects: objects common to POS MIBs
1.3.6.1.4.1.1916.1.20.1NodeextremeAps
1.3.6.1.4.1.1916.1.20.1.1NodeextremeApsConfig
1.3.6.1.4.1.1916.1.20.1.1.1ScalarextremeApsConfigEnabledread-onlycurrentGlobal APS enablement
1.3.6.1.4.1.1916.1.20.1.1.2TableextremeApsGroupConfigTablenot-accessiblecurrentThis table contains configuration information by defined APS group.
1.3.6.1.4.1.1916.1.20.1.1.2.1RowextremeApsGroupConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.1.2.1.1ColumnextremeApsGroupConfigGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.2.1.2ColumnextremeApsGroupConfigRevertModeread-onlycurrentThe revertive mode configured for the APS group. This indicates whether APS will switch-back automatically after the working line error is cleared. In non-reve…
1.3.6.1.4.1.1916.1.20.1.1.2.1.3ColumnextremeApsGroupConfigRevertMinutesread-onlycurrentThe number of minutes APS will wait after the error has been cleared before switching back to the working line. During this interval, the K1 request will indic…
1.3.6.1.4.1.1916.1.20.1.1.2.1.4ColumnextremeApsGroupConfigDirectionread-onlycurrentThe directional mode configured for the APS group. This indicates whether protection switches are coordinated between both POS equipment and ADM (bidirectional…
1.3.6.1.4.1.1916.1.20.1.1.2.1.5ColumnextremeApsGroupConfigTimerIntervalread-onlycurrentThe number of seconds between APS out-of-band peer protocol hello messages. This value is relevant when the working line and protection line exist is physicall…
1.3.6.1.4.1.1916.1.20.1.1.2.1.6ColumnextremeApsGroupConfigTimerMissesread-onlycurrentThe number of APS out-of-band peer protocol messages transmitted without receiving a response before the protection switch declares the working switch inoperab…
1.3.6.1.4.1.1916.1.20.1.1.2.1.7ColumnextremeApsGroupConfigAuthenticateread-onlycurrentWhen enabled, the authentication string on both working and protection switches must match.
1.3.6.1.4.1.1916.1.20.1.1.2.1.8ColumnextremeApsGroupConfigAuthStringread-onlycurrentIf configured, this is the authentication string that must match between working and protection switches. This field is relevant if the APS group is configured…
1.3.6.1.4.1.1916.1.20.1.1.3TableextremeApsPortConfigTablenot-accessiblecurrentThis table contains configuration information for APS ports.
1.3.6.1.4.1.1916.1.20.1.1.3.1RowextremeApsPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.1.3.1.1ColumnextremeApsPortConfigGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.3.1.2ColumnextremeApsPortConfigPortNumberread-onlycurrentThe value of ifIndex that identifies the port.
1.3.6.1.4.1.1916.1.20.1.1.3.1.3ColumnextremeApsPortConfigPortTyperead-onlycurrentThe port type designation.
1.3.6.1.4.1.1916.1.20.1.1.4TableextremeApsProtectPortConfigTablenot-accessiblecurrentThis table contains configuration information for APS protection ports.
1.3.6.1.4.1.1916.1.20.1.1.4.1RowextremeApsProtectPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.1.4.1.1ColumnextremeApsProtectPortConfigGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.4.1.2ColumnextremeApsProtectPortConfigPortNumberread-onlycurrentThe value of ifIndex that identifies the protection port.
1.3.6.1.4.1.1916.1.20.1.1.4.1.3ColumnextremeApsProtectPortConfigWorkingIpAddrread-onlycurrentThe IP address of the working switch. If the working and protection lines reside on the same chassis, this IP address will be a local address.
1.3.6.1.4.1.1916.1.20.1.2NodeextremeApsStatus
1.3.6.1.4.1.1916.1.20.1.2.1TableextremeApsGroupTablenot-accessiblecurrentThis table contains run-time information by defined APS group.
1.3.6.1.4.1.1916.1.20.1.2.1.1RowextremeApsGroupEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.2.1.1.1ColumnextremeApsGroupGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.2.1.1.2ColumnextremeApsGroupActivePortread-onlycurrentThe APS port which is currently carrying the network traffic.
1.3.6.1.4.1.1916.1.20.1.2.1.1.3ColumnextremeApsGroupEffectiveDirectionread-onlycurrentThe effective directional mode for the APS group. When this value differs from the configured directional mode, check the ADM and switch provisioning for a mis…
1.3.6.1.4.1.1916.1.20.1.2.1.1.4ColumnextremeApsGroupPeerProtoStatusread-onlycurrentThe APS out-of-band peer protocol status for a group.
1.3.6.1.4.1.1916.1.20.1.2.2TableextremeApsProtectPortTablenot-accessiblecurrentThis table contains run-time information by defined APS protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1RowextremeApsProtectPortEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.2.2.1.1ColumnextremeApsProtectPortGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.2.2.1.2ColumnextremeApsProtectPortPortNumberread-onlycurrentThe value of ifIndex that identifies the protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.3ColumnextremeApsProtectPortTransmitK1read-onlycurrentThe K1 overhead byte currently being transmitted on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.4ColumnextremeApsProtectPortTransmitK2read-onlycurrentThe K2 overhead byte currently being transmitted on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.5ColumnextremeApsProtectPortReceiveK1read-onlycurrentThe K1 overhead byte currently being received on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.6ColumnextremeApsProtectPortReceiveK2read-onlycurrentThe K2 overhead byte currently being received on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.7ColumnextremeApsProtectPortSwitchInitByWorkingread-onlycurrentThe number of switches that have been initiated by the working-line router.
1.3.6.1.4.1.1916.1.20.1.2.2.1.8ColumnextremeApsProtectPortSwitchInitByProtectread-onlycurrentThe number of switches that have been initiated by the protection-line router.
1.3.6.1.4.1.1916.1.20.1.2.2.1.9ColumnextremeApsProtectPortSwitchInitByADMread-onlycurrentThe number of switches that have been initiated by the ADM.
1.3.6.1.4.1.1916.1.20.1.2.2.1.10ColumnextremeApsProtectPortSwitchInitByCmdread-onlycurrentThe number of switches that have been initiated by an external CLI command.
1.3.6.1.4.1.1916.1.20.1.2.2.1.11ColumnextremeApsProtectPortSuccessfulSwitchesread-onlycurrentThe number of successful APS line switches.
1.3.6.1.4.1.1916.1.20.1.2.2.1.12ColumnextremeApsProtectPortHelloProtFailsread-onlycurrentThe number of APS out-of-band peer protocol failures recorded. This situation causes the protection-line router to initiate a line switch.
1.3.6.1.4.1.1916.1.20.1.3NodeextremeApsErrors
1.3.6.1.4.1.1916.1.20.1.3.1TableextremeApsLineErrorTablenot-accessiblecurrentThis table contains APS line error information.
1.3.6.1.4.1.1916.1.20.1.3.1.1RowextremeApsLineErrorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.3.1.1.1ColumnextremeApsLineErrorGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.3.1.1.2ColumnextremeApsLineErrorPortNumberread-onlycurrentThe ifIndex value which identifies the APS port.
1.3.6.1.4.1.1916.1.20.1.3.1.1.3ColumnextremeApsLineErrorSignalDegradeActiveread-onlycurrentIndicates whether a signal degrade condition currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.4ColumnextremeApsLineErrorBERSignalDegradeActiveread-onlycurrentIndicates whether a signal degrade condition due to excessive Bit-Error-Rate currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.5ColumnextremeApsLineErrorSignalFailActiveread-onlycurrentIndicates whether a signal fail condition currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.6ColumnextremeApsLineErrorBERSignalFailActiveread-onlycurrentIndicates whether a signal fail condition due to excessive Bit-Error-Rate currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.7ColumnextremeApsLineErrorSignalDegradesread-onlycurrentThe number of signal degrades that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.8ColumnextremeApsLineErrorBERSignalDegradesread-onlycurrentThe number of signal degrades due to excessive Bit-Error-Rate that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.9ColumnextremeApsLineErrorSignalFailsread-onlycurrentThe number of signal fails that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.10ColumnextremeApsLineErrorBERSignalFailsread-onlycurrentThe number of signal fails due to excessive Bit-Error-Rate that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.2TableextremeApsProtocolErrorTablenot-accessiblecurrentThis table contains APS protocol error information. These errors are relevant for APS protection ports.
1.3.6.1.4.1.1916.1.20.1.3.2.1RowextremeApsProtocolErrorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.3.2.1.1ColumnextremeApsProtocolErrorGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.3.2.1.2ColumnextremeApsProtocolErrorPortNumberread-onlycurrentThe ifIndex value which identifies the APS protection port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.3ColumnextremeApsProtocolErrorModeMismatchDefectread-onlycurrentIndicates whether a Mode Mismatch defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.4ColumnextremeApsProtocolErrorProtSwitchByteDefectread-onlycurrentIndicates whether a Protection Switching Byte defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.5ColumnextremeApsProtocolErrorChannelMismatchDefectread-onlycurrentIndicates whether a Channel Mismatch defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.6ColumnextremeApsProtocolErrorFarEndProtectDefectread-onlycurrentIndicates whether a Far-End Protection defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.7ColumnextremeApsProtocolErrorModeMismatchFailureread-onlycurrentIndicates whether a Mode Mismatch failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.8ColumnextremeApsProtocolErrorProtSwitchByteFailureread-onlycurrentIndicates whether a Protection Switching Byte failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.9ColumnextremeApsProtocolErrorChannelMismatchFailureread-onlycurrentIndicates whether a Channel Mismatch failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.10ColumnextremeApsProtocolErrorFarEndProtectFailureread-onlycurrentIndicates whether a Far-End Protection failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.11ColumnextremeApsProtocolErrorModeMismatchNumFailsread-onlycurrentThe number of Mode Mismatch failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.12ColumnextremeApsProtocolErrorProtSwitchByteNumFailsread-onlycurrentThe number of Protection Switching Byte failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.13ColumnextremeApsProtocolErrorChannelMismatchNumFailsread-onlycurrentThe number of Channel Mismatch failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.14ColumnextremeApsProtocolErrorFarEndProtectNumFailsread-onlycurrentThe number of Far-End Protection failures that have been recorded.
1.3.6.1.4.1.1916.1.21IdentityextremeNPMibExtreme NP objects: NP card information
1.3.6.1.4.1.1916.1.21.1NodeextremeNPModule
1.3.6.1.4.1.1916.1.21.1.1TableextremeNPModuleTablenot-accessiblecurrentA table containing information about each Intelligent module in the chassis.
1.3.6.1.4.1.1916.1.21.1.1.1RowextremeNPModuleEntrynot-accessiblecurrentA table entry containing information about the intelligent modules configured in the chassis. This table does not contain rows for the slots which do not have …
1.3.6.1.4.1.1916.1.21.1.1.1.1ColumnextremeNPModuleSlotNumberread-onlycurrentA unique integer identifying the particular slot in the chassis.
1.3.6.1.4.1.1916.1.21.1.1.1.2ColumnextremeNPModuleDescriptionread-onlycurrentA description of the particular slot in the chassis.
1.3.6.1.4.1.1916.1.21.1.1.1.3ColumnextremeNPModuleCurrentSoftwareread-onlycurrentThe version of the software currently running on the module.
1.3.6.1.4.1.1916.1.21.1.1.1.4ColumnextremeNPModulePrimarySoftwareread-onlycurrentThe version of software in the primary image of the module.
1.3.6.1.4.1.1916.1.21.1.1.1.5ColumnextremeNPModuleSecondarySoftwareread-onlycurrentThe version of software in the secondary image of the module.
1.3.6.1.4.1.1916.1.21.1.1.1.6ColumnextremeNPModuleBootromVersionread-onlycurrentThe version of bootrom that the module will use when restarting.
1.3.6.1.4.1.1916.1.21.1.1.1.7ColumnextremeNPModuleProcessorStateread-onlycurrentAn Octet String indicating the status of the various processors on an Intelligent Module. Each byte in the Octet String represents state for one processor. For…
1.3.6.1.4.1.1916.1.21.2NodeextremeSMAModule
1.3.6.1.4.1.1916.1.21.2.1TableextremeSMATablenot-accessiblecurrentA table containing information about each SMA module in the chassis.
1.3.6.1.4.1.1916.1.21.2.1.1RowextremeSMAEntrynot-accessiblecurrentA table entry containing information about the SMA modules configured in the chassis. This table does not contain rows for the slots which do not have an SMA m…
1.3.6.1.4.1.1916.1.21.2.1.1.1ColumnextremeSMASlotNumberread-onlycurrentA unique integer identifying the particular slot in the chassis.
1.3.6.1.4.1.1916.1.21.2.1.1.2ColumnextremeSMAProtocolVersionread-onlycurrentProtocol version.
1.3.6.1.4.1.1916.1.21.2.1.1.3ColumnextremeSMAServiceVersionread-onlycurrentService release version.
1.3.6.1.4.1.1916.1.21.2.1.1.4ColumnextremeSMAUpTimeread-onlycurrentContinuous operating time of the module in seconds.
1.3.6.1.4.1.1916.1.21.2.1.1.5ColumnextremeSMACpuUtilizationread-onlycurrentPercentage of CPU utilized in the last 5 seconds.
1.3.6.1.4.1.1916.1.21.2.1.1.6ColumnextremeSMAMemUtilizationread-onlycurrentPercentage of memory utilized.
1.3.6.1.4.1.1916.1.21.2.1.1.7ColumnextremeSMAQosBroadcasterread-onlycurrent60 second rolling average of %QoS. Number of bytes received / Number of bytes expected per duration. Note: this can potentially exceed 100%.
1.3.6.1.4.1.1916.1.21.2.1.1.8ColumnextremeSMANumFromBroadcasterread-onlycurrentThe total number of broadcasters sending streams.
1.3.6.1.4.1.1916.1.21.2.1.1.9ColumnextremeSMANumToListenerread-onlycurrentThe total number of listeners connected.
1.3.6.1.4.1.1916.1.21.2.1.1.10ColumnextremeSMABytesBroadcasterread-onlycurrentThe total number of media bytes received from the broadcasters.
1.3.6.1.4.1.1916.1.21.2.1.1.11ColumnextremeSMABytesListenerread-onlycurrentThe total number of data bytes sent to listeners.
1.3.6.1.4.1.1916.1.21.3NodeextremeATMModule
1.3.6.1.4.1.1916.1.21.3.1TableextremeATMCellPduTablenot-accessiblecurrentA table containing information about each ATM module in the chassis.
1.3.6.1.4.1.1916.1.21.3.1.1RowextremeATMCellPduEntrynot-accessiblecurrentA table entry containing information about the ATM modules configured in the chassis. This table does not contain rows for the slots which do not have an ATM m…
1.3.6.1.4.1.1916.1.21.3.1.1.1ColumnextremeATMPortNumberread-onlycurrentA unique integer identifying the particular port number in the chassis.
1.3.6.1.4.1.1916.1.21.3.1.1.2ColumnextremeATMRxCellread-onlycurrentThe number of ATM cell Received.
1.3.6.1.4.1.1916.1.21.3.1.1.3ColumnextremeATMTxCellread-onlycurrentThe number of ATM cell Transmitted.
1.3.6.1.4.1.1916.1.21.3.1.1.4ColumnextremeATMRxCellHecErrorread-onlycurrentThe number of received cells with HEC error.
1.3.6.1.4.1.1916.1.21.3.1.1.5ColumnextremeATMRxCellErrorread-onlycurrentThe number of received cells discarded due to other error.
1.3.6.1.4.1.1916.1.21.3.1.1.6ColumnextremeATMRxAAL5Pduread-onlycurrentThe number AAL-5 PDU Received.
1.3.6.1.4.1.1916.1.21.3.1.1.7ColumnextremeATMTxAAL5Pduread-onlycurrentThe number AAL-5 PDU Transmitted.
1.3.6.1.4.1.1916.1.21.3.1.1.8ColumnextremeATMRxAAL5Bytesread-onlycurrentThe number AAL-5 PDU Octetd Received.
1.3.6.1.4.1.1916.1.21.3.1.1.9ColumnextremeATMTxAAL5Bytesread-onlycurrentThe number AAL-5 PDU Octetd Transmitted.
1.3.6.1.4.1.1916.1.21.3.1.1.10ColumnextremeATMPortStatusread-onlycurrentATM port status.
1.3.6.1.4.1.1916.1.21.3.2TableextremeATMVpiVciTablenot-accessiblecurrentA table containing information about each ATM module in the chassis.
1.3.6.1.4.1.1916.1.21.3.2.1RowextremeATMVpiVciEntrynot-accessiblecurrentA table entry containing information about the ATM modules configured in the chassis. This table does not contain rows for the slots which do not have an ATM m…
1.3.6.1.4.1.1916.1.21.3.2.1.1ColumnextremeATMPortNumread-onlycurrentA unique integer identifying the particular port number in the chassis.
1.3.6.1.4.1.1916.1.21.3.2.1.2ColumnextremeATMPvcread-onlycurrentA unique integer identifying the pvc number configured on a single port.
1.3.6.1.4.1.1916.1.21.3.2.1.3ColumnextremeATMVpiread-onlycurrentA unique integer identifying the VPI value of the configured PVCs.
1.3.6.1.4.1.1916.1.21.3.2.1.4ColumnextremeATMVciread-onlycurrentA unique integer identifying the VCI value of the configured PVCs.
1.3.6.1.4.1.1916.1.21.4NodeextremeMplsModule
1.3.6.1.4.1.1916.1.21.4.1TableextremeMplsTlsTablenot-accessiblecurrentA table containing information about each MPLS TLS tunnel in the chassis.
1.3.6.1.4.1.1916.1.21.4.1.1RowextremeMplsTlsEntrynot-accessiblecurrentA table entry containing information about the MPLS TLS tunnel.
1.3.6.1.4.1.1916.1.21.4.1.1.1ColumnextremeMplsTlsNumread-onlycurrentAn index used to reference each configured TLS tunnel.
1.3.6.1.4.1.1916.1.21.4.1.1.2ColumnextremeMplsTlsNameread-onlycurrentThe user defined TLS tunnel identifier name.
1.3.6.1.4.1.1916.1.21.4.1.1.3ColumnextremeMplsTlsLocalIpAddrread-onlycurrentThe TLS tunnel local endpoint IP address, only valid if TLS tunnel is Dynamic. Otherwise, this field is set to zero.
1.3.6.1.4.1.1916.1.21.4.1.1.4ColumnextremeMplsTlsPeerIpAddrread-onlycurrentThe TLS tunnel peer endpoint IP address.
1.3.6.1.4.1.1916.1.21.4.1.1.5ColumnextremeMplsTlsLocalVlanIDread-onlycurrentThe local Egress Vlan ID.
1.3.6.1.4.1.1916.1.21.4.1.1.6ColumnextremeMplsTlsLocalVlanNameread-onlycurrentThe local Egress Vlan Name.
1.3.6.1.4.1.1916.1.21.4.1.1.7ColumnextremeMplsTlsDynamicread-onlycurrentFlag indicating that the TLS tunnel is Dynamic. If set, the TLS tunnel is dynamically signaled. If zero, the TLS tunnel is statically configured.
1.3.6.1.4.1.1916.1.21.4.1.1.8ColumnextremeMplsTlsTyperead-onlycurrentThe TLS tunnel type 0- MPLS, Static 1- MPLS, Martini .
1.3.6.1.4.1.1916.1.21.4.1.1.9ColumnextremeMplsTlsVcIDread-onlycurrentThe configured VC ID, only valid if TLS tunnel is Dynamic. Otherwise, this field is set to zero.
1.3.6.1.4.1.1916.1.21.4.1.1.10ColumnextremeMplsTlsLocalGroupIDread-onlycurrentThe configured Local Group ID, only valid if TLS tunnel is Dynamic. Otherwise, this field is set to zero.
1.3.6.1.4.1.1916.1.21.4.1.1.11ColumnextremeMplsTlsRemoteGroupIDread-onlycurrentThe learned Remote Group ID, only valid if TLS tunnel is Dynamic. Otherwise, this field is set to zero.
1.3.6.1.4.1.1916.1.21.4.1.1.12ColumnextremeMplsTlsIngressVcLabelread-onlycurrentThe TLS tunnel VLAN Ingress Label. If the TLS tunnel is Static, this value is configured. If TLS tunnel is Dynamic, this value is dynamically allocated from th…
1.3.6.1.4.1.1916.1.21.4.1.1.13ColumnextremeMplsTlsEgressVcLabelread-onlycurrentThe TLS tunnel VLAN Egress Label. If the TLS tunnel is Static, this value is configured. If TLS tunnel is Dynamic, this value is learned from the TLS tunnel pe…
1.3.6.1.4.1.1916.1.21.4.1.1.14ColumnextremeMplsTlsVcStateread-onlycurrentThe TLS tunnel VC state. Valid states include: - Idle - No LSP Available - Waiting for LDP session - Pending label mapping - Pending local configuration - MTU …
1.3.6.1.4.1.1916.1.21.4.1.1.15ColumnextremeMplsTlsPacketTxread-onlycurrentThe number of Packets Transmitted on this TLS tunnel.
1.3.6.1.4.1.1916.1.21.4.1.1.16ColumnextremeMplsTlsPacketRxread-onlycurrentThe number of Packets Received on this TLS tunnel.
1.3.6.1.4.1.1916.1.21.4.1.1.17ColumnextremeMplsTlsOctetTxread-onlycurrentThe number of Octets Transmitted on this TLS tunnel.
1.3.6.1.4.1.1916.1.21.4.1.1.18ColumnextremeMplsTlsOctetRxread-onlycurrentThe number of Octets Received on this TLS tunnel.
1.3.6.1.4.1.1916.1.22IdentityextremeNetFlowExtreme NetFlow tables.
1.3.6.1.4.1.1916.1.22.1NodeextremeNetFlowConfigPort
1.3.6.1.4.1.1916.1.22.1.1TableextremeNetFlowPortConfigTablenot-accessiblecurrentThis table contains configuration information for a defined NetFlow port.
1.3.6.1.4.1.1916.1.22.1.1.1RowextremeNetFlowPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.22.1.1.1.1ColumnextremeNetFlowPortConfigPortIndexnot-accessiblecurrentThe index value for the port.
1.3.6.1.4.1.1916.1.22.1.1.1.2ColumnextremeNetFlowPortConfigEnabledread-onlycurrentFlag indicating if port is enabled.
1.3.6.1.4.1.1916.1.22.1.1.1.3ColumnextremeNetFlowPortConfigTimoutread-onlycurrentThe port timeout value.
1.3.6.1.4.1.1916.1.22.1.1.1.4ColumnextremeNetFlowPortOverFlowPacketsread-onlycurrentThe number of packets not accounted for due to lack of resources. Implemented on PoS ports only
1.3.6.1.4.1.1916.1.22.1.2TableextremeNetFlowPortFilterConfigTablenot-accessiblecurrentThis table contains configuration information for a defined NetFlow filter.
1.3.6.1.4.1.1916.1.22.1.2.1RowextremeNetFlowPortFilterConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.22.1.2.1.1ColumnextremeNetFlowPortConfigPortNumbernot-accessiblecurrentThe port number for the filter.
1.3.6.1.4.1.1916.1.22.1.2.1.2ColumnextremeNetFlowPortConfigFilterEgressnot-accessiblecurrentFlag indicating whether this is a request for an egress filter (1) or an ingress filter (0).
1.3.6.1.4.1.1916.1.22.1.2.1.3ColumnextremeNetFlowPortConfigFilterNumbernot-accessiblecurrentThe filter number being requested (1-8).
1.3.6.1.4.1.1916.1.22.1.2.1.4ColumnextremeNetFlowPortEnabledread-onlycurrentFlag indicating whether port is enabled.
1.3.6.1.4.1.1916.1.22.1.2.1.5ColumnextremeNetFlowFilterEnabledread-onlycurrentFlag indicating whether filter is enabled.
1.3.6.1.4.1.1916.1.22.1.2.1.6ColumnextremeNetFlowDestIpAddressread-onlycurrentFilter Destination IP address.
1.3.6.1.4.1.1916.1.22.1.2.1.7ColumnextremeNetFlowDestIpAddressMaskread-onlycurrentFilter Destination IP address Mask.
1.3.6.1.4.1.1916.1.22.1.2.1.8ColumnextremeNetFlowSourceIpAddressread-onlycurrentFilter Source IP address.
1.3.6.1.4.1.1916.1.22.1.2.1.9ColumnextremeNetFlowSourceIpAddressMaskread-onlycurrentFilter Source IP address Mask.
1.3.6.1.4.1.1916.1.22.1.2.1.10ColumnextremeNetFlowDestPortread-onlycurrentThe destination port (valid for TCP and UDP flows only).
1.3.6.1.4.1.1916.1.22.1.2.1.11ColumnextremeNetFlowDestPortMaskread-onlycurrentThe destination port mask.
1.3.6.1.4.1.1916.1.22.1.2.1.12ColumnextremeNetFlowSourcePortread-onlycurrentThe source port (valid for TCP and UDP flows only).
1.3.6.1.4.1.1916.1.22.1.2.1.13ColumnextremeNetFlowSourcePortMaskread-onlycurrentThe source port mask.
1.3.6.1.4.1.1916.1.22.1.2.1.14ColumnextremeNetFlowProtocolread-onlycurrentThe IP protocol for the filter.
1.3.6.1.4.1.1916.1.22.1.2.1.15ColumnextremeNetFlowProtocolMaskread-onlycurrentThe IP protocol mask.
1.3.6.1.4.1.1916.1.22.1.2.1.16ColumnextremeNetFlowFilterGroupNumberread-onlycurrentThe Group Number.
1.3.6.1.4.1.1916.1.22.1.2.1.17ColumnextremeNetFlowMatchAllFlagread-onlycurrentFilter is set to match all flows.
1.3.6.1.4.1.1916.1.22.1.2.1.18ColumnextremeNetFlowMatchNoneFlagread-onlycurrentFilter is set to not match any flows.
1.3.6.1.4.1.1916.1.22.2NodeextremeNetFlowConfigGroup
1.3.6.1.4.1.1916.1.22.2.2TableextremeNetFlowGroupCollectorTablenot-accessiblecurrentThis table contains configuration information for a defined NetFlow group flow entry.
1.3.6.1.4.1.1916.1.22.2.2.1RowextremeNetFlowGroupCollectorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.22.2.2.1.1ColumnextremeNetFlowGroupNumbernot-accessiblecurrentThe group number.
1.3.6.1.4.1.1916.1.22.2.2.1.2ColumnextremeNetFlowCollectorIdnot-accessiblecurrentThe collector number.
1.3.6.1.4.1.1916.1.22.2.2.1.3ColumnextremeNetFlowGroupPingEnabledread-onlycurrentFlag indicating if ping is enabled for the group
1.3.6.1.4.1.1916.1.22.2.2.1.4ColumnextremeNetFlowGroupSourceIpread-onlycurrentSource IP address for the group.
1.3.6.1.4.1.1916.1.22.2.2.1.5ColumnextremeNetFlowCollectorIpAddressread-onlycurrentThe collector's configured IP address.
1.3.6.1.4.1.1916.1.22.2.2.1.6ColumnextremeNetFlowCollectorUdpPortread-onlycurrentThe collector's configured UDP port number.
1.3.6.1.4.1.1916.1.22.2.2.1.7ColumnextremeNetFlowCollectorStatusUpread-onlycurrentFlag indicating if the collector is up.
1.3.6.1.4.1.1916.1.22.2.2.1.8ColumnextremeNetFlowCollectorDowntimeread-onlycurrentThe downtime value for the collector.
1.3.6.1.4.1.1916.1.22.2.2.1.9ColumnextremeNetFlowCollectorPacketsTxread-onlycurrentThe transmit packet count for the collector.
1.3.6.1.4.1.1916.1.23IdentityextremeSnmpv3Extreme-specific SNMPv3 objects
1.3.6.1.4.1.1916.1.23.1NodeextremeTarget
1.3.6.1.4.1.1916.1.23.1.1TableextremeTargetAddrExtTablenot-accessiblecurrentThis table is an extension to the snmpTargetAddrTable found in the SNMP-TARGET-MIB. It contains Extreme Networks specific objects needed for each management ta…
1.3.6.1.4.1.1916.1.23.1.1.1RowextremeTargetAddrExtEntrynot-accessiblecurrentAn entry in the extremeTargetAddrExtTable.
1.3.6.1.4.1.1916.1.23.1.1.1.1ColumnextremeTargetAddrExtIgnoreMPModelread-writecurrentWhen this object is set to TRUE, the version of the trap/notification sent to the corresponding management target (trap receiver) will be the same as in releas…
1.3.6.1.4.1.1916.1.23.1.1.1.2ColumnextremeTargetAddrExtStandardModeread-writecurrentWhen this object is set to TRUE, the management target will be treated as a 'standard mode' one, in that any Extreme Networks specific extra varbinds present i…
1.3.6.1.4.1.1916.1.23.1.1.1.3ColumnextremeTargetAddrExtTrapDestIndexread-onlycurrentThis object contains the value of the trapDestIndex in the corresponding entry of the RMON trapDestTable.
1.3.6.1.4.1.1916.1.23.1.1.1.4ColumnextremeTargetAddrExtUseEventCommread-writecurrentThis object is used only when sending RMON alarms as SNMPv3 traps. When it is set to TRUE and an RMON risingAlarm or fallingAlarm is being sent for an event, t…
1.3.6.1.4.1.1916.1.24IdentityextremeCableExtreme-specific Cable objects
1.3.6.1.4.1.1916.1.24.1NodeextremeDiagConfigGroup
1.3.6.1.4.1.1916.1.24.1.1ScalarextremeDiagConfigTimeread-writecurrentIndicates the time at which the Diagnostics information will be collected for the ports which have Auto-Diagnostics configured. Time must be given in hh:mm:ss …
1.3.6.1.4.1.1916.1.24.1.2ScalarextremeDiagConfigRoFread-writecurrentIndicates whether a port should return to INIT state on Diagnostics Failure. If TRUE the port will be restarted even if the Diagnostics indicate a Failure. If …
1.3.6.1.4.1.1916.1.24.2TableextremeDiagPortConfigTablenot-accessiblecurrentTable, which contains the diagnostic configuration information for the ports
1.3.6.1.4.1.1916.1.24.2.1RowextremeDiagPortConfigEntrynot-accessiblecurrentEach row represents port related diagnostics configuration
1.3.6.1.4.1.1916.1.24.2.1.1ColumnextremeDiagPortCfgPortIfIndexread-onlycurrentIfIndex of the Port for which the information in this row applies
1.3.6.1.4.1.1916.1.24.2.1.2ColumnextremeDiagPortCfgModeread-onlycurrentThe mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected.
1.3.6.1.4.1.1916.1.24.2.1.3ColumnextremeDiagPortCfgStatusread-writecurrentSpecifies whether Diagnostics are enabled or disabled for the port. In the manual mode, enable and disable will disable the corresponding bit in the manual Dia…
1.3.6.1.4.1.1916.1.24.3TableextremeDiagPortDiagTablenot-accessiblecurrentTable contains the diagnostic information for the ports
1.3.6.1.4.1.1916.1.24.3.1RowextremeDiagPortDiagEntrynot-accessiblecurrentEach row represents port related diagnostics information
1.3.6.1.4.1.1916.1.24.3.1.1ColumnextremeDiagPortDiagPortIfIndexread-onlycurrentIfIndex of the Port for which the information in this row applies
1.3.6.1.4.1.1916.1.24.3.1.2ColumnextremeDiagPortDiagModeread-onlycurrentThe mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected.
1.3.6.1.4.1.1916.1.24.3.1.3ColumnextremeDiagPortSpeedread-onlycurrentSpecifies the speed of the port
1.3.6.1.4.1.1916.1.24.3.1.4ColumnextremeDiagPortSwapABread-onlycurrentSpecifies whether pairA pairB cables are swapped
1.3.6.1.4.1.1916.1.24.3.1.5ColumnextremeDiagPortSwapCDread-onlycurrentSpecifies whether pairC and pairD cables are swapped
1.3.6.1.4.1.1916.1.24.3.1.6ColumnextremeDiagPortPairAPolread-onlycurrentSpecifies the polarity of pairA cables
1.3.6.1.4.1.1916.1.24.3.1.7ColumnextremeDiagPortPairAFlenread-onlycurrentSpecifies the distance of Fault in the pairA cables
1.3.6.1.4.1.1916.1.24.3.1.8ColumnextremeDiagPortPairALenread-onlycurrentSpecifies the length of the pairA cables
1.3.6.1.4.1.1916.1.24.3.1.9ColumnextremeDiagPortPairASkewread-onlycurrentSkew of pairA cables with respect to the fastest pair
1.3.6.1.4.1.1916.1.24.3.1.10ColumnextremeDiagPortPairAStatusread-onlycurrentIndicates whether pairA cables are properly terminated, short or open
1.3.6.1.4.1.1916.1.24.3.1.11ColumnextremeDiagPortPairBPolread-onlycurrentSpecifies the polarity of pairB cables
1.3.6.1.4.1.1916.1.24.3.1.12ColumnextremeDiagPortPairBFlenread-onlycurrentSpecifies the distance of Fault in the pairB cables
1.3.6.1.4.1.1916.1.24.3.1.13ColumnextremeDiagPortPairBLenread-onlycurrentSpecifies the length of the pairB cables
1.3.6.1.4.1.1916.1.24.3.1.14ColumnextremeDiagPortPairBSkewread-onlycurrentSkew of pairB cables with respect to the fastest pair
1.3.6.1.4.1.1916.1.24.3.1.15ColumnextremeDiagPortPairBStatusread-onlycurrentIndicates whether pairB cables are properly terminated, short or open
1.3.6.1.4.1.1916.1.24.3.1.16ColumnextremeDiagPortPairCPolread-onlycurrentSpecifies the polarity of pairC cables
1.3.6.1.4.1.1916.1.24.3.1.17ColumnextremeDiagPortPairCFlenread-onlycurrentSpecifies the distance of Fault in the pairC cables
1.3.6.1.4.1.1916.1.24.3.1.18ColumnextremeDiagPortPairCLenread-onlycurrentSpecifies the length of the pairC cables
1.3.6.1.4.1.1916.1.24.3.1.19ColumnextremeDiagPortPairCSkewread-onlycurrentSkew of pairC cables with respect to the fastest pair
1.3.6.1.4.1.1916.1.24.3.1.20ColumnextremeDiagPortPairCStatusread-onlycurrentIndicates whether pairC cables are properly terminated, short or open
1.3.6.1.4.1.1916.1.24.3.1.21ColumnextremeDiagPortPairDPolread-onlycurrentSpecifies the polarity of pairD cables
1.3.6.1.4.1.1916.1.24.3.1.22ColumnextremeDiagPortPairDFlenread-onlycurrentSpecifies the distance of Fault in the pairD cables
1.3.6.1.4.1.1916.1.24.3.1.23ColumnextremeDiagPortPairDLenread-onlycurrentSpecifies the length of the pairD cables
1.3.6.1.4.1.1916.1.24.3.1.24ColumnextremeDiagPortPairDSkewread-onlycurrentSkew of pairD cables with respect to the fastest pair
1.3.6.1.4.1.1916.1.24.3.1.25ColumnextremeDiagPortPairDStatusread-onlycurrentIndicates whether pairD cables are properly terminated, short or open
1.3.6.1.4.1.1916.1.24.3.1.26ColumnextremeDiagPortDateTimeread-onlycurrentDate and time at which the Diagnostic information was collected
1.3.6.1.4.1.1916.1.24.4TableextremeDiagPortStatsTablenot-accessiblecurrentTable, which contains the diagnostic statistic information for the ports
1.3.6.1.4.1.1916.1.24.4.1RowextremeDiagPortStatsEntrynot-accessiblecurrentEach row represents port related diagnostics statistics information
1.3.6.1.4.1.1916.1.24.4.1.1ColumnextremeDiagPortStatsPortIfIndexread-onlycurrentIfIndex of the Port for which the information in this row applies
1.3.6.1.4.1.1916.1.24.4.1.2ColumnextremeDiagPortStatsNumDiagread-onlycurrentNumber of times Diagnostics information collected for this port
1.3.6.1.4.1.1916.1.24.4.1.3ColumnextremeDiagPortStatsNumSuccessread-onlycurrentNumber of times Diagnostics for this port completed successfully without any errors
1.3.6.1.4.1.1916.1.24.4.1.4ColumnextremeDiagPortStatsNumFailread-onlycurrentNumber of times Diagnostics for this port Failed due to errors in the cable pairs
1.3.6.1.4.1.1916.1.24.4.1.5ColumnextremeDiagPortStatsNumChangeread-onlycurrentNumber of times Diagnostics Changed for this port
1.3.6.1.4.1.1916.1.24.4.1.6ColumnextremeDiagPortStatsNumAbortread-onlycurrentNumber of times Diagnostics was aborted by the user for this port
1.3.6.1.4.1.1916.1.25IdentityextremeWirelessExtreme Wireless Access Tables
1.3.6.1.4.1.1916.1.25.1NodeextremeAP
1.3.6.1.4.1.1916.1.25.1.1TableextremeWirelessPortStatusTablenot-accessiblecurrentThis table contains one entry per detected AP.
1.3.6.1.4.1.1916.1.25.1.1.1RowextremeWirelessPortStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.1.1.1ColumnextremeWirelessPortIpAddressread-writecurrentThis value is assigned to the port for external management.
1.3.6.1.4.1.1916.1.25.1.1.1.2ColumnextremeWirelessPortNetmaskread-writecurrentThis value is assigned to the AP for external management.
1.3.6.1.4.1.1916.1.25.1.1.1.3ColumnextremeWirelessPortGatewayread-writecurrentThis value is assigned to the AP for external management.
1.3.6.1.4.1.1916.1.25.1.1.1.4ColumnextremeWirelessPortManagementIPread-writecurrentThis value is used by the AP when sending out Management packets to the external world. This IP is used as src-ip address in Syslog messages, as NAS-Identifier…
1.3.6.1.4.1.1916.1.25.1.1.1.5ColumnextremeWirelessPortEnableWirelessTrapsread-writecurrentIf set to TRUE the wireless port will send traps for Authentication and association successful events. If set to FALSE no traps will be generated. Note: We alw…
1.3.6.1.4.1.1916.1.25.1.1.1.6ColumnextremeWirelessPortLocationread-writecurrentThis describes the physical location of the wireless port.
1.3.6.1.4.1.1916.1.25.1.1.1.7ColumnextremeWirelessPortDetectedMaxAgeread-writecurrentThis is the number of seconds a station can stay in the detected station table without authenticating.
1.3.6.1.4.1.1916.1.25.1.1.1.8ColumnextremeWirelessPortMgmtVLANread-onlycurrentThis value indicates the VLAN tag that should be applied to all control traffic between the AP and the platform.
1.3.6.1.4.1.1916.1.25.1.1.1.9ColumnextremeWirelessPortBootromVersionread-onlycurrentThis is the current version of the bootrom on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.10ColumnextremeWirelessPortSWVersionread-onlycurrentThis is the current software version of this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.11ColumnextremeWirelessPortSysDescrread-onlycurrentThis is the equivalent value of sysDescr from the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.12ColumnextremeWirelessPortManufacturerNameread-onlycurrent
1.3.6.1.4.1.1916.1.25.1.1.1.13ColumnextremeWirelessPortProductNameread-onlycurrent
1.3.6.1.4.1.1916.1.25.1.1.1.14ColumnextremeWirelessPortSerialNumberread-onlycurrentThis is the unique serial number for this device.
1.3.6.1.4.1.1916.1.25.1.1.1.15ColumnextremeWirelessPortEdpNeighborIdread-onlycurrentEDP assigns a unique ID to each neighbor to disambiguate references. This can be used to index into the extremeEdpTable.
1.3.6.1.4.1.1916.1.25.1.1.1.16ColumnextremeWirelessPortClearCountersread-writecurrentThis value can be set to true to force the device to reset it's counters. A read will return false.
1.3.6.1.4.1.1916.1.25.1.1.1.17ColumnextremeWirelessPortClearLogread-writecurrentThis value can be set to true to force the device to clear its local log store. A read will return false.
1.3.6.1.4.1.1916.1.25.1.1.1.18ColumnextremeWirelessPortWatchdogResetread-writecurrentThis is to enable/disable watchdog timer reset on timeout. Default is enable. If it is enabled, system should reset when the watchdog kicks in. On next bootup,…
1.3.6.1.4.1.1916.1.25.1.1.1.19ColumnextremeWirelessPortNumPhysInterfacesread-onlycurrentEach wireless port has a set of physical interface which are numbered 1-N. This variable gives the number of physical interfaces on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.20ColumnextremeWirelessPortHWVersionread-onlycurrentThis is the current hardware version of this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.21ColumnextremeWirelessPortMacAddressread-onlycurrentUnique MAC Address assigned to the ethernet interface on the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.22ColumnextremeWirelessPortRadiusPortIDread-writecurrentA string value that should be sent by the AP to the radius server as the Port-ID radius attribute in authentication requests
1.3.6.1.4.1.1916.1.25.1.1.1.23ColumnextremeWirelessPortBootUpTimeread-writecurrentThe sysUpTime of the LAC when the port was booted up. Should be set only during the AP boot up.
1.3.6.1.4.1.1916.1.25.1.1.1.24ColumnextremeWirelessPortCountryCoderead-writecurrentThe country code that the AP is programmed to operate in.
1.3.6.1.4.1.1916.1.25.1.1.1.25ColumnextremeWirelessPortWallclockTimeread-writecurrentThe wall clock time as known to the LAC. Expressed in number of seconds since Jan 1, 1970
1.3.6.1.4.1.1916.1.25.1.1.1.26ColumnextremeWirelessPortPartNumberread-writecurrentThis describes the part number of the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.27ColumnextremeWirelessPortPartRevisionread-writecurrentThis describes the revision of the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.28ColumnextremeWirelessPortUpTimeread-writecurrentThe number of seconds the port has been in the online state.
1.3.6.1.4.1.1916.1.25.1.1.1.29ColumnextremeWirelessPortStatusAntennaTyperead-writecurrentThis is the type of the Antenna for Detachable product. For Altitude-2d series, further selection is available through this variable.
1.3.6.1.4.1.1916.1.25.1.1.1.30ColumnextremeWirelessPortStatusAntennaLocationread-writecurrentThis specifies the location the detachable antenna.
1.3.6.1.4.1.1916.1.25.1.1.1.31ColumnextremeWirelessPortStatusAntenna2point4GHZGainread-createcurrentThis specifies 2.4GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.1.1.1.32ColumnextremeWirelessPortStatusAntenna5GHZGainread-createcurrentThis specifies 5GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.1.1.1.33ColumnextremeWirelessPortPrimaryBootloaderVersionread-onlycurrentThis is the version of the primary bootloader on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.34ColumnextremeWirelessPortSecondaryBootloaderVersionread-onlycurrentThis is the version of the Secondary bootloader on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.35ColumnextremeWirelessPortCurrentBootloaderInUseread-onlycurrentThis specifies if the bootloader booted is primary or secondary one.
1.3.6.1.4.1.1916.1.25.1.2TableextremeWirelessPortLogStatusTablenot-accessiblecurrentThis table contains one entry for each wireless port which is configured via the configuration table.
1.3.6.1.4.1.1916.1.25.1.2.1RowextremeWirelessPortLogStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.2.1.1ColumnextremeWirelessPortLogStatusIndexnot-accessiblecurrentThere are 9 entries in this table to correspond to the 8 entries configured in the cfg table plus one for the LAC.
1.3.6.1.4.1.1916.1.25.1.2.1.2ColumnextremeWirelessPortLogStatusDestIpread-writecurrentThis is the IP address to which syslog messsages will be sent. A value of 0.0.0.0 indicates that this entry is disabled. The source IP for every syslog message…
1.3.6.1.4.1.1916.1.25.1.2.1.3ColumnextremeWirelessPortLogStatusDestIpTyperead-writecurrentThe type of address specified in the object 'extremeWirelessPortLogStatusDestIp. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.1.2.1.4ColumnextremeWirelessPortLogStatusPortread-writecurrentThis is the port to which syslog messages will be sent.
1.3.6.1.4.1.1916.1.25.1.2.1.5ColumnextremeWirelessPortLogStatusFacilityread-writecurrentOptional value for syslog facility local0-7.
1.3.6.1.4.1.1916.1.25.1.2.1.6ColumnextremeWirelessPortLogStatusSeverityread-writecurrentThe syslog message severity. All syslog messages that have a severity >= specified severity, will be sent to this syslog server.
1.3.6.1.4.1.1916.1.25.1.2.1.7ColumnextremeWirelessPortLogStatusStatusread-writecurrentSpecifies whether the log server is enabled or not.
1.3.6.1.4.1.1916.1.25.1.3TableextremeWirelessPortLogTablenot-accessiblecurrentThis table allows access to the syslog entries on particular wireless ports.
1.3.6.1.4.1.1916.1.25.1.3.1RowextremeWirelessPortLogEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.3.1.1ColumnextremeWirelessPortLogIndexnot-accessiblecurrentThis is an arbitrary integer which is assinged to entries in order of their insertion.
1.3.6.1.4.1.1916.1.25.1.3.1.2ColumnextremeWirelessPortLogMessageread-onlycurrentThis is the formatted syslog message which was sent.
1.3.6.1.4.1.1916.1.25.1.4TableextremeWirelessPhysInterfaceCtlTablenot-accessiblecurrentThis table provides configuration of per-physical interface values.
1.3.6.1.4.1.1916.1.25.1.4.1RowextremeWirelessPhysInterfaceCtlEntrynot-accessiblecurrentEach entry is indexed by the wirelessInterfaceIndex, and represents a wireless interface.
1.3.6.1.4.1.1916.1.25.1.4.1.1ColumnextremeWirelessPhysInterfaceIndexaccessible-for-notifycurrentThis is the ifIndex of an individual physical interface on an AP. Each radio will have a unique value.
1.3.6.1.4.1.1916.1.25.1.4.1.2ColumnextremeWirelessPhysInterfacePHYChannelread-writecurrentThis is the RF channel which will be used by this transmitter. Range should be established by configuration of RegDomain and PHYType.
1.3.6.1.4.1.1916.1.25.1.4.1.3ColumnextremeWirelessPhysInterfaceSpeedread-writecurrentThis value indicates the current setting for Tx speed for the interface. Only one of thebits of this bit set can be set. If all bits are unset (ie a 0 is passe…
1.3.6.1.4.1.1916.1.25.1.4.1.4ColumnextremeWirelessPhysInterfaceNumVirtInterfacesread-writecurrentEach physical interface has a number of virtual interfaces This specifies the number of virt interfaces.
1.3.6.1.4.1.1916.1.25.1.4.1.5ColumnextremeWirelessPhysInterfaceChannelAutoSelectStatusread-onlycurrentThis OID reflects the status of the channel auto selection process.
1.3.6.1.4.1.1916.1.25.1.4.1.6ColumnextremeWirelessPhysInterfaceRadarInterfaceChannelListread-onlycurrentThis OID reflects the list oc 802.11(a) channels on which radar interference was detected.
1.3.6.1.4.1.1916.1.25.1.5TableextremeWirelessInterfaceStatusTablenot-accessiblecurrentThis table provides statistics and information on the current condition of each wireless interace. There is one entry per virtual and physical wireless interfa…
1.3.6.1.4.1.1916.1.25.1.5.1RowextremeWirelessInterfaceStatusEntrynot-accessiblecurrentEach entry in this table is indexed by either a virtual or a physical ifIndex.
1.3.6.1.4.1.1916.1.25.1.5.1.1ColumnextremeWirelessIntfTotalDetectedread-onlycurrentThis gives the total number of stations which have entered the detected state on this wireless interface since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.5.1.2ColumnextremeWirelessIntfTotalAuthedread-onlycurrentThis gives the total number of stations which have entered the authenticated state on this wireless interface since the last time the counters were cleared. No…
1.3.6.1.4.1.1916.1.25.1.5.1.3ColumnextremeWirelessIntfTotalAuthFailedread-onlycurrentThis gives the total number of stations which have failed to authenticate on this wireless interface. Note that no distinction is made between a MAC-layer or h…
1.3.6.1.4.1.1916.1.25.1.5.1.4ColumnextremeWirelessIntfTotalAssocread-onlycurrentThis gives the total number of stations which have entered the associated state on this wireless interface since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.5.1.5ColumnextremeWirelessIntfTotalAssocFailedread-onlycurrentThis gives the total number of stations which have failed the association on this wireless interface since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.5.1.6ColumnextremeWirelessIntfRateDetectedread-onlycurrentThis gives the rate of clients being detected on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.7ColumnextremeWirelessIntfRateAuthedread-onlycurrentThis gives teh rate of clients being authenticated on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.8ColumnextremeWirelessIntfRateAuthFailedread-onlycurrentThis gives the rate of clients failed authentication on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.9ColumnextremeWirelessIntfRateAssocread-onlycurrentThis gives the rate of clients being associated on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.10ColumnextremeWirelessIntfRateAssocFailedread-onlycurrentThis gives the rate of clients failing association on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.11ColumnextremeWirelessIntfBlockTimeread-onlycurrentThis value specifies the number of ticks until traffic will be allowed back on this interface. A non-zero value indicates that traffic has been blocked, most l…
1.3.6.1.4.1.1916.1.25.1.5.1.12ColumnextremeWirelessIntfCurrentDetectedread-onlycurrentThis gives the current number of stations which are in the detected state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.13ColumnextremeWirelessIntfCurrentAuthedread-onlycurrentThis gives the current number of stations which are in the authenticated state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.14ColumnextremeWirelessIntfCurrentAssocread-onlycurrentThis gives the current number of stations which are in the associated state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.15ColumnextremeWirelessIntfCurrentForwardingread-onlycurrentThis gives the current number of stations which are in the forwarding state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.6TableextremeWirelessVirtInterfaceCtlTablenot-accessiblecurrentThis table provides configuration of per-physical-interface values.
1.3.6.1.4.1.1916.1.25.1.6.1RowextremeWirelessVirtInterfaceCtlEntrynot-accessiblecurrentEach entry is indexed by the wirelessInterfaceIndex, and represents a virtual wireless interface.
1.3.6.1.4.1.1916.1.25.1.6.1.1ColumnextremeWirelessVirtInterfaceIndexaccessible-for-notifycurrentThis is the ifIndex of an individual interface on an AP. Each virtual interface will have a unique value.
1.3.6.1.4.1.1916.1.25.1.6.1.2ColumnextremeWirelessVirtInterfaceMacAddressread-onlycurrentThe maximum number of clients that can associate with this virtual interface.
1.3.6.1.4.1.1916.1.25.1.6.1.3ColumnextremeWirelessVirtInterfaceMaxClientsread-writecurrentThe maximum number of clients that can associate with this virtual interface.
1.3.6.1.4.1.1916.1.25.1.6.1.4ColumnextremeWirelessVirtInterfaceWirelessBridgingread-writecurrentThis specifies whether wireless bridging is enabled on this interface. If wireless bridging is enabled then traffic originating from a client on this interface…
1.3.6.1.4.1.1916.1.25.1.6.1.5ColumnextremeWirelessVirtInterfaceLastStateChangeread-onlycurrentThe value of sysUpTime when the virtual interface entered its current state
1.3.6.1.4.1.1916.1.25.1.6.1.6ColumnextremeWirelessVirtInterfaceStateread-writecurrentThis value specifies whether the virtual interface is active or not
1.3.6.1.4.1.1916.1.25.1.6.1.7ColumnextremeWirelessVirtInterfaceIappEnabledread-writecurrentIAPP status. A value of TRUE indicates IAPP is enabled on the interface.
1.3.6.1.4.1.1916.1.25.1.6.1.8ColumnextremeWirelessVirtInterfaceSvpEnabledread-writecurrentSVP status. A value of TRUE indicates SVP is enabled on the interface.
1.3.6.1.4.1.1916.1.25.1.7TableextremeWirelessVirtInterfaceSecurityCtlTablenot-accessiblecurrentThis table provides configuration of per-interface values.
1.3.6.1.4.1.1916.1.25.1.7.1RowextremeWirelessVirtInterfaceSecurityCtlEntrynot-accessiblecurrentEach entry is indexed by the wirelessInterfaceIndex, and represents a wireless interface.
1.3.6.1.4.1.1916.1.25.1.7.1.1ColumnextremeWirelessVirtInterfaceESSNameread-writecurrentThe ESS ID of this interface.
1.3.6.1.4.1.1916.1.25.1.7.1.2ColumnextremeWirelessVirtInterfaceSSIDInBeaconread-writecurrentDoes this interface generate a beacon with the SSID in it?
1.3.6.1.4.1.1916.1.25.1.7.1.3ColumnextremeWirelessVirtInterfaceDot11AuthModeread-writecurrentSetting this to true indicates whether to use open or shared authentication
1.3.6.1.4.1.1916.1.25.1.7.1.4ColumnextremeWirelessVirtInterfaceNetworkAuthModeread-writecurrentThis specifies the authentication mode to use on top of dot11 MAC authentication
1.3.6.1.4.1.1916.1.25.1.7.1.5ColumnextremeWirelessVirtInterfaceDataVlanread-writecurrentThis is the VLAN to use for client data in case of the VLAN is not received as a VSA. This VLAN is also used for authentication types like PSK, WEP, etc
1.3.6.1.4.1.1916.1.25.1.7.1.6ColumnextremeWirelessVirtInterfaceIgnoreVSAVlanread-writecurrentIf this is set then the VLAN returned as a VSA will be ignored and the Data Vlan specified above will be used instead
1.3.6.1.4.1.1916.1.25.1.7.1.7ColumnextremeWirelessVirtInterfaceWEPDefaultKeyread-writecurrentThis value indicates the index in dot11WEPDefaultKeyTable that identifies the key this interface will use to decrypt packets.
1.3.6.1.4.1.1916.1.25.1.7.1.8ColumnextremeWirelessVirtInterfaceEncryptionLengthread-writecurrentThis is the length of the encryption key to use in case of dot1x legacy mode and WEP. If this length is 0 then no WEP encryption.
1.3.6.1.4.1.1916.1.25.1.8TableextremeWirelessVirtInterfaceDot1xCtlTablenot-accessiblecurrentThere is one entry in this table for each virtual interface It reflects the dot1x security config
1.3.6.1.4.1.1916.1.25.1.8.1RowextremeWirelessVirtInterfaceDot1xCtlEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.8.1.1ColumnextremeWirelessVirtInterfaceKeyMgmtSuiteread-writecurrentThis bitmask configures the authentication suites to be used.
1.3.6.1.4.1.1916.1.25.1.8.1.2ColumnextremeWirelessVirtInterfaceMcastCipherSuiteread-writecurrentThis configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic is derived from this using the following algorithm: Mcas…
1.3.6.1.4.1.1916.1.25.1.8.1.3ColumnextremeWirelessVirtInterfaceDot1xPSKValueread-writecurrentThe Pre-Shared Key (PSK) for when WPA in PSK mode is the selected authentication suite.
1.3.6.1.4.1.1916.1.25.1.8.1.4ColumnextremeWirelessVirtInterfaceDot1xPSKPassPhraseread-writecurrentThe PSK, for when WPA in PSK mode is the selected authentication suite, is configured by extremeWirelessVirtInterfaceKeyMgmtSuite. An alternative manner of set…
1.3.6.1.4.1.1916.1.25.1.8.1.5ColumnextremeWirelessVirtInterfaceDot1xReAuthPeriodread-writecurrentNumber of seconds a clients authentication will last before the AP automatically issues a reauthentication request.
1.3.6.1.4.1.1916.1.25.1.8.1.6ColumnextremeWirelessVirtInterfaceGroupUpdateTimeOutread-writecurrentThe time in minutes after which the RSN group update handshake will be retried. The timer shall start at the moment the group update message is sent.
1.3.6.1.4.1.1916.1.25.1.8.1.7ColumnextremeWirelessVirtInterfacePairwiseUpdateTimeOutread-writecurrentThe time in minutes after which the RSN 4-way handshake will be retried. The timer shall start at the moment a 4-way message is sent.
1.3.6.1.4.1.1916.1.25.1.8.1.8ColumnextremeWirelessVirtInterfaceDot11iPreauthEnableread-writecurrentEnables/Disable 802.11i pre-authentication.
1.3.6.1.4.1.1916.1.25.1.9TableextremeWirelessVirtInterfaceWEPKeyTablenot-accessiblecurrentThis table contains per-profile WEP keys. Reference ieee802dot11.1.2.3.
1.3.6.1.4.1.1916.1.25.1.9.1RowextremeWirelessVirtInterfaceWEPKeyEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.9.1.1ColumnextremeWirelessVirtInterfaceWEPKeyIndexnot-accessiblecurrentThere can be upto 4 wep keys for any wireless interface. Four of the keys are to be used with WEP Authentication, and the other four with MAC Auth.
1.3.6.1.4.1.1916.1.25.1.9.1.2ColumnextremeWirelessVirtInterfaceWEPKeyread-createcurrentThis is a write-only wep key.
1.3.6.1.4.1.1916.1.25.1.9.1.3ColumnextremeWirelessVirtInterfaceWEPKeyStatusread-createcurrentSpecifies whether the key is present or not.
1.3.6.1.4.1.1916.1.25.1.10TableextremeWirelessPhysInterfaceRFCtlTablenot-accessiblecurrentThis table provides configuration of per-interface values.
1.3.6.1.4.1.1916.1.25.1.10.1RowextremeWirelessPhysInterfaceRFCtlEntrynot-accessiblecurrentEach entry is indexed by the wirelessInterfaceIndex, and represents a wireless interface.
1.3.6.1.4.1.1916.1.25.1.10.1.1ColumnextremeWirelessPhysInterfaceBeaconPeriodread-writecurrentThis is the beacon interval to use
1.3.6.1.4.1.1916.1.25.1.10.1.2ColumnextremeWirelessPhysInterfaceTxPowerLevelread-writecurrentThis is the % of max power to transmit at.
1.3.6.1.4.1.1916.1.25.1.10.1.3ColumnextremeWirelessPhysInterfaceDTIMPeriodread-writecurrentThis is the DTIM period.
1.3.6.1.4.1.1916.1.25.1.10.1.4ColumnextremeWirelessPhysInterfaceFragLengthread-writecurrent
1.3.6.1.4.1.1916.1.25.1.10.1.5ColumnextremeWirelessPhysInterfaceLongRetryread-writecurrentAttribute indicates the maximum number of transmission attempts of a frame whose size is > RTS.
1.3.6.1.4.1.1916.1.25.1.10.1.6ColumnextremeWirelessPhysInterfaceShortRetryread-writecurrentAttribute indicates the maximum number of transmission attempts of a frame whose size is <= RTS.
1.3.6.1.4.1.1916.1.25.1.10.1.7ColumnextremeWirelessPhysInterfaceRTSThresholdread-writecurrent
1.3.6.1.4.1.1916.1.25.1.10.1.8ColumnextremeWirelessPhysInterfaceSupportedDataRatesRxValueread-onlycurrentA bitmask of all supported datarates for Rx.
1.3.6.1.4.1.1916.1.25.1.10.1.9ColumnextremeWirelessPhysInterfaceSupportedDataRatesTxValueread-onlycurrentA bitmask of all supported datarates for Tx.
1.3.6.1.4.1.1916.1.25.1.10.1.10ColumnextremeWirelessPhysInterfacePHYTyperead-writecurrentThis variable selects between 802.11 a/b/g for this transmitter. It should be used by ap to range check frequency, etc.
1.3.6.1.4.1.1916.1.25.1.10.1.11ColumnextremeWirelessPhysInterfacePHYSupportedTypesread-onlycurrentThis is the 802.11 standard supported by this interface as a bitmask
1.3.6.1.4.1.1916.1.25.1.10.1.12ColumnextremeWirelessPhysInterfacePreambleread-writecurrentThis changes the 802 preamble expected by the interface.
1.3.6.1.4.1.1916.1.25.1.10.1.13ColumnextremeWirelessPhysInterfaceAbsTxPowerLevelread-onlycurrentThis is the absolute value of max power to transmit level in dBm.
1.3.6.1.4.1.1916.1.25.1.11TableextremeWirelessClientTablenot-accessiblecurrentThis table augments the Dot11AccessPointAddressTableEntry to add a per-client VLAN entry.
1.3.6.1.4.1.1916.1.25.1.11.1RowextremeWirelessClientEntrynot-accessiblecurrentAn entry in the extremeWirelessClientTable. It is possible for there to be multiple IEEE 802.11 interfaces on one agent, each with its unique MAC address. The …
1.3.6.1.4.1.1916.1.25.1.11.1.1ColumnextremeWirelessClientIDread-onlycurrentThe Unique MAC Address of the station for which this address table entry pertains.
1.3.6.1.4.1.1916.1.25.1.11.1.2ColumnextremeWirelessClientStateread-onlycurrentThis attribute shall indicate the current state of the connection between a wireless station and the AP. The attribute is enumerated as follows: 1 - Detected -…
1.3.6.1.4.1.1916.1.25.1.11.1.3ColumnextremeWirelessClientEncryptionread-onlycurrentThis attribute is contains the encryption mechanism being used by the station in an AP that allows mixed encryption modes.
1.3.6.1.4.1.1916.1.25.1.11.1.4ColumnextremeWirelessClientSignalStrengthread-onlycurrentThis attribute shall specify the signal strength of the last frame received from the station in - dBm. e.g. a value of 50 implies -50 dBm.
1.3.6.1.4.1.1916.1.25.1.11.1.5ColumnextremeWirelessClientLinkQualityread-onlycurrentThis attribute shall contain an indication of the quality of the signal as measured in the last frame received from the station. TBD format of this attribute
1.3.6.1.4.1.1916.1.25.1.11.1.6ColumnextremeWirelessClientVLANread-onlycurrentThis is the per-client VLAN which was pushed over by a RADIUS server or other mechanism.
1.3.6.1.4.1.1916.1.25.1.11.1.7ColumnextremeWirelessClientPriorityread-onlycurrentThis is a per-client 802.1p value which was either configured by the RADIUS server or statically through the port configuration table.
1.3.6.1.4.1.1916.1.25.1.11.1.8ColumnextremeWirelessClientAuthTyperead-onlycurrentThis is an indication of what access method was used to authenticated the client. The strongest mechanism used should be listed here, in case more than one was…
1.3.6.1.4.1.1916.1.25.1.11.1.9ColumnextremeWirelessClientLastStateChangeTimeread-onlycurrentThis is the sysUpTime of the switch when the clients state changed last
1.3.6.1.4.1.1916.1.25.1.11.1.10ColumnextremeWirelessClientTxFramesread-onlycurrentThis is the number of packets transmitted to the client
1.3.6.1.4.1.1916.1.25.1.11.1.11ColumnextremeWirelessClientRxFramesread-onlycurrentThis is the number of packets transmitted by the client
1.3.6.1.4.1.1916.1.25.1.11.1.12ColumnextremeWirelessClientTxBytesread-onlycurrentThis is the number of bytes transmitted to the client
1.3.6.1.4.1.1916.1.25.1.11.1.13ColumnextremeWirelessClientRxBytesread-onlycurrentThis is the number of bytes transmitted by the client
1.3.6.1.4.1.1916.1.25.1.11.1.14ColumnextremeWirelessClientLastPacketTyperead-onlycurrentThis the the last packet type seen from the specific client
1.3.6.1.4.1.1916.1.25.1.11.1.15ColumnextremeWirelessClientSSIDread-onlycurrentThe SSID that this client was using
1.3.6.1.4.1.1916.1.25.1.11.1.16ColumnextremeWirelessClientStatusread-writecurrentThis variable is used to delete an entry from the table. The only value this can be set to, is delete (6). If an entry is deleted, that is already in Associate…
1.3.6.1.4.1.1916.1.25.1.11.1.17ColumnextremeWirelessClientIPread-onlycurrentIP Address of the wireless client.
1.3.6.1.4.1.1916.1.25.1.11.1.18ColumnextremeWirelessClientUsernameread-onlycurrentUsername (if any) of the wireless client.
1.3.6.1.4.1.1916.1.25.1.11.1.19ColumnextremeWirelessClientDecryptionFailuresread-onlycurrentThis is the number of failures during decrypting packets from this client.
1.3.6.1.4.1.1916.1.25.1.11.1.20ColumnextremeWirelessClientMICFailuresread-onlycurrentThis is the number of MIC failures for this client.
1.3.6.1.4.1.1916.1.25.1.12TableextremeAPAuthServerTablenot-accessiblecurrentThis table is proxied by the wireless APs. It allows the wireless concentrator to configure the APs security settings.
1.3.6.1.4.1.1916.1.25.1.12.1RowextremeAPAuthServerEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.12.1.1ColumnextremeAPAuthServerIndexnot-accessiblecurrentInteger representing either primary (1) or backup (2) server.
1.3.6.1.4.1.1916.1.25.1.12.1.2ColumnextremeAPAuthServerAddressTyperead-onlycurrentThe type of address specified in the object 'extremeAuthServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.1.12.1.3ColumnextremeAPAuthServerAddressread-writecurrentIP address of the radius server. The act of assigning an IP address enables the client to use the server. Setting this value to 0.0.0.0 disables this entry.
1.3.6.1.4.1.1916.1.25.1.12.1.4ColumnextremeAPAuthServerPortread-onlycurrentThe UDP port number of the remote syslog server to which syslog messages will be sent.
1.3.6.1.4.1.1916.1.25.1.12.1.5ColumnextremeAPAuthServerSecretread-writecurrentThis is the shared secret between the Authenticator and radius server. This is logically write-only.
1.3.6.1.4.1.1916.1.25.1.12.1.6ColumnextremeAPAuthServerReTransmitread-writecurrentThis is the timeout in seconds after which the Authenticator will re transmit requests to the radius server.
1.3.6.1.4.1.1916.1.25.1.12.1.7ColumnextremeAPAuthServerStatusread-writecurrentSpecifies whether the DNS entry is in use or not
1.3.6.1.4.1.1916.1.25.1.21IdentityextremeDot11apThis MIB module provides managemetn of a set of APs. It is based on the IEEE AP MIB with additions for better indexing.
1.3.6.1.4.1.1916.1.25.1.22IdentityextremeDot11fThis MIB module provides management of IAPP on a set of APs. It is functionally identical to the IAPP MIB from the IEEE with the addition of a new index.
1.3.6.1.4.1.1916.1.25.1.24TableextremeWirelessScanCfgTablenot-accessiblecurrentThis table contains one entry per wireless interface. It allows for configuration of active and passive scan parameters.
1.3.6.1.4.1.1916.1.25.1.24.1RowextremeWirelessScanCfgEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.24.1.1ColumnextremeWirelessScanEnableread-writecurrentBy setting this to true the wireless interface will collect information from beacons and (possible) probe responses. If this value is set to false this informa…
1.3.6.1.4.1.1916.1.25.1.24.1.2ColumnextremeWirelessScanSendProberead-writecurrentIf this value is set to TRUE the wireless interface will send probe requests to the broadcast SSID every ProbeInterval. The results of these probes will be rec…
1.3.6.1.4.1.1916.1.25.1.24.1.3ColumnextremeWirelessScanProbeIntervalread-writecurrentThis allows for the configuration of the interval over which probe requests will be sent.
1.3.6.1.4.1.1916.1.25.1.24.1.4ColumnextremeWirelessScanResultTableSizeread-writecurrentThis parameter permits the configuration of the result table size. If there are more entries discovered than there are room for the new entry will replace the …
1.3.6.1.4.1.1916.1.25.1.24.1.5ColumnextremeWirelessScanResultTimeoutread-writecurrentBy default the scan result table will age out entries which haven't been updated for some time. When an entry is aged out of the table a scanResultAgeOut trap …
1.3.6.1.4.1.1916.1.25.1.24.1.6ColumnextremeWirelessScanResetStatsread-writecurrentSetting this to TRUE will cause the scan module to reset its internal statistics, as well as the packet counts for each entry in the scan results table. It wil…
1.3.6.1.4.1.1916.1.25.1.24.1.7ColumnextremeWirelessScanClearTableread-writecurrentSetting this to TRUE will cause the scan module to reset its internal table. All currently detected stations will be removed. Scan statistics (i.e. watermark) …
1.3.6.1.4.1.1916.1.25.1.24.1.8ColumnextremeWirelessScanSendAPAddedTrapread-writecurrentSetting this to TRUE will cause the scan module to send a trap whenever a new entry is added to the scan results table. If this value is false the scan module …
1.3.6.1.4.1.1916.1.25.1.24.1.9ColumnextremeWirelessScanSendAPRemovedTrapread-writecurrentSetting this to TRUE will cause the scan module to send a trap whenever an entry is removed from the scan results table.
1.3.6.1.4.1.1916.1.25.1.24.1.10ColumnextremeWirelessScanSendAPUpdatedTrapread-writecurrentSetting this to TRUE will cause the scan module to send a trap whenever an entry is updated in the scan results table. This will happen if the list of IEs sent…
1.3.6.1.4.1.1916.1.25.1.25TableextremeWirelessOffChannelScanCfgTablenot-accessiblecurrentThis table contains one entry per wireless interface. It allows for configuration of off-channel scan. To start an off-channel scan the management station shou…
1.3.6.1.4.1.1916.1.25.1.25.1RowextremeWirelessOffChannelScanCfgEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.25.1.1ColumnextremeWirelessOffChannelScanStartread-writecurrentSetting this to TRUE will cause the scan module to start an off-channel scan. The radio will be disabled for the duration of the scan. The scan module will cha…
1.3.6.1.4.1.1916.1.25.1.25.1.2ColumnextremeWirelessOffChannelScanListread-writecurrentThis value controls the channels which will be scanned during the off-channel scan. Two special values should be noted: all - causes the radio to scan all chan…
1.3.6.1.4.1.1916.1.25.1.25.1.3ColumnextremeWirelessOffChannelScanMinWaitread-writecurrentThis value controls the minimum time the off-channel scan will wait on a particular channel if it doesn't see any traffic.
1.3.6.1.4.1.1916.1.25.1.25.1.4ColumnextremeWirelessOffChannelScanMaxWaitread-writecurrentThis value controls the maximum time the off-channel scan will wait on a particular channel even if it is receiving beacons etc.
1.3.6.1.4.1.1916.1.25.1.25.1.5ColumnextremeWirelessOffChannelContinuousread-writecurrentSetting this value to true results in the off-channel scan looping on the configured values until the channel scan is disabled.
1.3.6.1.4.1.1916.1.25.1.26TableextremeWirelessScanStatusTablenot-accessiblecurrentThis table contains one entry per wireless interface. It provides status and statistics information for the scan feature operating on that wireless interface.
1.3.6.1.4.1.1916.1.25.1.26.1RowextremeWirelessScanStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.26.1.1ColumnextremeWirelessScanCurrentTableSizeread-onlycurrentThis indicates the current number of entries in the scan results table.
1.3.6.1.4.1.1916.1.25.1.26.1.2ColumnextremeWirelessScanTableWatermarkread-onlycurrentThis indicates the largest size the results table has reached since the status values have been reset, or the system has booted.
1.3.6.1.4.1.1916.1.25.1.26.1.3ColumnextremeWirelessScanTotalOverflowsread-onlycurrentThis gives the total number of entries which have been removed to make room for a newer entry. This should be equal to the number of AP added traps the system …
1.3.6.1.4.1.1916.1.25.1.26.1.4ColumnextremeWirelessScanTotalTimeoutsread-onlycurrentThis gives the total number of entries which have been removed because they have become stale. This should be equal to the number of AP removed traps sent by t…
1.3.6.1.4.1.1916.1.25.1.26.1.5ColumnextremeWirelessScanOffChannelRunningread-onlycurrentIf this value is true it indicates that an off-channel scan is currently running. This implies that the radio is current disabled.
1.3.6.1.4.1.1916.1.25.1.26.1.6ColumnextremeWirelessScanCurrentChannelread-onlycurrentIf the value of extremeWirelessScanOffChannelRunning is true this variable give the value of the current channel the AP is scanning on. If a scan is not runnin…
1.3.6.1.4.1.1916.1.25.1.26.1.7ColumnextremeWirelessScanLastElementread-onlycurrentThis gives the sysUpTime when the last new station was inserted in the results table.
1.3.6.1.4.1.1916.1.25.1.26.1.8ColumnextremeWirelessScanNumProbesread-onlycurrentThis gives the number of probe requests sent by this wireless interface.
1.3.6.1.4.1.1916.1.25.1.27TableextremeWirelessScanResultsTablenot-accessiblecurrentThis table contains one entry per wireless interface. It provides status and statistics information for the scan feature operating on that wireless interface.
1.3.6.1.4.1.1916.1.25.1.27.1RowextremeWirelessScanResultsEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.27.1.1ColumnextremeWirelessScanResultsStationIdread-onlycurrentThis is the MAC address of the detected station.
1.3.6.1.4.1.1916.1.25.1.27.1.2ColumnextremeWirelessScanResultsFirstSeenread-onlycurrentThis gives the sysUpTime when this station entry was created.
1.3.6.1.4.1.1916.1.25.1.27.1.3ColumnextremeWirelessScanResultsLastChangeread-onlycurrentThis gives the sysUpTime of the station entry the last time it was updated (i.e. a beacon etc was received).
1.3.6.1.4.1.1916.1.25.1.27.1.4ColumnextremeWirelessScanResultsPacketTimeread-onlycurrentThis gives the timestamp field from the last beacon/probe response received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.5ColumnextremeWirelessScanResultsPacketRateread-onlycurrentThis gives the rate at which the last packet was sent by the station. TODO: What are the units here on rate?
1.3.6.1.4.1.1916.1.25.1.27.1.6ColumnextremeWirelessScanResultsChannelread-onlycurrentThis gives the channel the last packet received by this station was recieved on.
1.3.6.1.4.1.1916.1.25.1.27.1.7ColumnextremeWirelessScanResultsMinRSSread-onlycurrentThis is the smallest RSS value of any packet recieved from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.8ColumnextremeWirelessScanResultsMaxRSSread-onlycurrentThis is the largest RSS value of any packet recieved from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.9ColumnextremeWirelessScanResultsAvgRSSread-onlycurrentThis is a running average of RSS values of all the packets received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.10ColumnextremeWirelessScanResultsTotalBeaconsread-onlycurrentThis counter gives the total number of beacons received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.11ColumnextremeWirelessScanResultsTotalProbesread-onlycurrentThis counter gives the total number of probe responses received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.12ColumnextremeWirelessScanResultsDiscoveredByread-onlycurrentThis gives the type of packet which cause this results entry to be created.
1.3.6.1.4.1.1916.1.25.1.27.1.13ColumnextremeWirelessScanResultsDSSOFDMread-onlycurrentTODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.14ColumnextremeWirelessScanResultsRSNEnabledread-onlycurrentIndicates if RSN capabilities are enabled on the sending station.
1.3.6.1.4.1.1916.1.25.1.27.1.15ColumnextremeWirelessScanResultsGShortSlotread-onlycurrentTODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.16ColumnextremeWirelessScanResultsChannelAgilityread-onlycurrentTODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.17ColumnextremeWirelessScanResultsPBCCread-onlycurrentTODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.18ColumnextremeWirelessScanResultsPreambleread-onlycurrentTODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.19ColumnextremeWirelessScanResultsPrivacyread-onlycurrentThis is true if MAC-based privacy is invoked on the sending station.
1.3.6.1.4.1.1916.1.25.1.27.1.20ColumnextremeWirelessScanResultsCFPollReqread-onlycurrentTODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.21ColumnextremeWirelessScanResultsCFPollableread-onlycurrentTODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.22ColumnextremeWirelessScanResultsNetworkTyperead-onlycurrentThis indicates what type of network it is. If this value is IBSS the last beacon/probe response was sent by a host operating in ad-hoc mode.
1.3.6.1.4.1.1916.1.25.1.27.1.23ColumnextremeWirelessScanResultsSSIDread-onlycurrentThis provides the value of the SSID value as is was recieved in the beacon or probe response. If no SSID was sent in the probe this value is NULL.
1.3.6.1.4.1.1916.1.25.1.27.1.24ColumnextremeWirelessScanResultsRateSetread-onlycurrentThis provides the value of the rate set IE as it was received in the beacon or probe response. If no rate set was recieved then this value is NULL.
1.3.6.1.4.1.1916.1.25.1.27.1.25ColumnextremeWirelessScanResultsExtRateSetread-onlycurrentThis provides the value of the extended rate set IE as it was received in the beacon or probe response. If no rate set was recieved then this value is NULL.
1.3.6.1.4.1.1916.1.25.1.27.1.26ColumnextremeWirelessScanResultsDSSParameterread-onlycurrentProvides the value of the DSS parameter IE, which is the channel.
1.3.6.1.4.1.1916.1.25.1.27.1.27ColumnextremeWirelessScanResultsTIMCountread-onlycurrentTODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.28ColumnextremeWirelessScanResultsTIMPeriodread-onlycurrentTODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.29ColumnextremeWirelessScanResultsTIMTrafficIndread-onlycurrentTODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.30ColumnextremeWirelessScanResultsCountryCoderead-onlycurrentValue of country code supplied by the IE
1.3.6.1.4.1.1916.1.25.1.27.1.31ColumnextremeWirelessScanWPAIEPresentread-onlycurrentIf this value is true it indicates that WPA information was gathered from this AP in the last beacon. It implies that the WPA variables below are valid. If thi…
1.3.6.1.4.1.1916.1.25.1.27.1.32ColumnextremeWirelessScanWPAVersionread-onlycurrentThis value gives the version of WPA supported by this AP. See IEEE 802.11i Draft 3.0 section 7 for meaning of various values.
1.3.6.1.4.1.1916.1.25.1.27.1.33ColumnextremeWirelessScanWPAIEMcastCipherread-onlycurrentThis value gives the single multicast cipher supported by this AP.
1.3.6.1.4.1.1916.1.25.1.27.1.34ColumnextremeWirelessScanWPAUcastCipherCountread-onlycurrentThis value gives the total number of unicast ciphers supported by this AP. It corresponds to the number of bits set in the extremeWirelessScanWPAUcastCipher va…
1.3.6.1.4.1.1916.1.25.1.27.1.35ColumnextremeWirelessScanWPAUcastCipherread-onlycurrentThis gives the list of cipher suites which are supported by this AP.
1.3.6.1.4.1.1916.1.25.1.27.1.36ColumnextremeWirelessScanWPAKeyMgmtCountread-onlycurrentThis gives the number of key-management schemes supported by this AP. It corresponds to the number of bits set in the extremeWirelessScanWPAKeyMgmtSuite variab…
1.3.6.1.4.1.1916.1.25.1.27.1.37ColumnextremeWirelessScanWPAKeyMgmtSuiteread-onlycurrentThis indicates the supported key-management suites supported by this AP.
1.3.6.1.4.1.1916.1.25.1.27.1.38ColumnextremeWirelessScanResultsIEBlobread-onlycurrentAll the IEs received in the last packet encoded as a blob of Type, Length, Value tuples.
1.3.6.1.4.1.1916.1.25.1.28TableextremeWirelessProbeInfoCfgTablenot-accessiblecurrentThis table contains one entry per physical and virtual interface. It controls the collection of client information via PROBE REQ packets.
1.3.6.1.4.1.1916.1.25.1.28.1RowextremeWirelessProbeInfoCfgEntrynot-accessiblecurrentNote that the ifIndex here can be either a physical or virtual wireless interface index.
1.3.6.1.4.1.1916.1.25.1.28.1.1ColumnextremeWirelessProbeInfoEnableread-writecurrentIf this is set to TRUE then this virtual or physical interface will register with the MAC layer to receive notification of PROBE REQ packets. In the case of a …
1.3.6.1.4.1.1916.1.25.1.28.1.2ColumnextremeWirelessProbeInfoKeepIEsread-writecurrentIf this value is set to TRUE then the rate IE which is carried in the PROBE REQ packet will be recorded. If FALSE, no rate information will be kept.
1.3.6.1.4.1.1916.1.25.1.28.1.3ColumnextremeWirelessProbeInfoTableSizeread-writecurrentThis value sets the maximum size of the probe info results table, which limits the number of clients this AP can record PROBE REQ information from.
1.3.6.1.4.1.1916.1.25.1.28.1.4ColumnextremeWirelessProbeInfoTimeoutread-writecurrentThis is the timeout, in seconds, for an entry in the probe info table. Once a PROBE REQ has not been heard from a client in this time period, it's entry is rem…
1.3.6.1.4.1.1916.1.25.1.28.1.5ColumnextremeWirelessProbeInfoTableClearread-writecurrentSetting this value to TRUE causes all entries in the probe info table to be removed. Reading this value has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.6ColumnextremeWirelessProbeInfoSourceClearread-writecurrentSetting this to the value of some MAC address results in any matching MAC address in the probe info table being removed. Reading this value has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.7ColumnextremeWirelessProbeInfoTableStatsClearread-writecurrentSetting this to TRUE results in all historical statistics in the probe info table being set to 0. No entries will be removed. Reading this has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.8ColumnextremeWirelessProbeInfoSourceStatsClearread-writecurrentSetting this to a MAC address will clear the historical stats associated with the matching MAC address in the probe info table. Reading this has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.9ColumnextremeWirelessProbeInfoSendAddedTrapread-writecurrentSetting this to TRUE will cause the management module to send a trap whenever a new PROBE REQ source is added to the probe info table. Setting this to FALSE wi…
1.3.6.1.4.1.1916.1.25.1.28.1.10ColumnextremeWirelessProbeInfoSendRemovedTrapread-writecurrentSetting this to TRUE will cause the management module to send a trap whenever a PROBE REQ source is removed from the probe info table. Setting this to false wi…
1.3.6.1.4.1.1916.1.25.1.29TableextremeWirelessProbeInfoStatusTablenot-accessiblecurrentThis table contains one entry per physical and virtual interface. It gives debugging and status information for the operation of the probe info feature on that…
1.3.6.1.4.1.1916.1.25.1.29.1RowextremeWirelessProbeInfoStatusEntrynot-accessiblecurrentNote that the ifIndex here can be either a physical or virtual wireless interface index.
1.3.6.1.4.1.1916.1.25.1.29.1.1ColumnextremeWirelessProbeInfoStatusCurrentTableSizeread-onlycurrentThis gives the current number of entries in the probe info table for this interface.
1.3.6.1.4.1.1916.1.25.1.29.1.2ColumnextremeWirelessProbeInfoStatusWatermarkread-onlycurrentThis is the maximum size the probe info table has been since the statistics have been reset.
1.3.6.1.4.1.1916.1.25.1.29.1.3ColumnextremeWirelessProbeInfoStatusTotalOverflowsread-onlycurrentThis gives the number of times an entry in the probe info table was overwritten because the table was full.
1.3.6.1.4.1.1916.1.25.1.29.1.4ColumnextremeWirelessProbeInfoStatusTotalTimeoutsread-onlycurrentThis gives the number of times an entry in the probe info table was timed out.
1.3.6.1.4.1.1916.1.25.1.29.1.5ColumnextremeWirelessProbeInfoStatusLastElementread-onlycurrentThis gives the sysUpTime the last time an entry was added to the probe info table (or modified).
1.3.6.1.4.1.1916.1.25.1.29.1.6ColumnextremeWirelessProbeInfoStatusTotalProbesread-onlycurrentThis gives the total number of PROBE REQ packets that this interface has gotten.
1.3.6.1.4.1.1916.1.25.1.30TableextremeWirelessProbeInfoTablenot-accessiblecurrentThis table contains one entry for each source MAC from which a PROBE REQ packet has been received. Entries are added when a packet is recieved from a new sourc…
1.3.6.1.4.1.1916.1.25.1.30.1RowextremeWirelessProbeInfoEntrynot-accessiblecurrentNote that the ifIndex here can be either a physical or virtual wireless interface index. In addition, this table is indexed by the MAC address of the PROBE REQ…
1.3.6.1.4.1.1916.1.25.1.30.1.1ColumnextremeWirelessProbeInfoSourceread-onlycurrentThis is the MAC address of the source which sent us the PROBE REQ packets described by this entry.
1.3.6.1.4.1.1916.1.25.1.30.1.2ColumnextremeWirelessProbeInfoTotalProbesread-onlycurrentThis gives the total number of PROBE REQ packets we have received from this source since the last time the stats were cleared.
1.3.6.1.4.1.1916.1.25.1.30.1.3ColumnextremeWirelessProbeInfoTotalProbeRespread-onlycurrentThis gives the total number of PROBE RESP packets we have sent to this source. This may not be equal to PROBE REQ based on rxmit, misses, etc.
1.3.6.1.4.1.1916.1.25.1.30.1.4ColumnextremeWirelessProbeInfoRateIESizeread-onlycurrentThis gives the size of the rate-ie field in bytes. This may be 0, at which point there is no rate-ie.
1.3.6.1.4.1.1916.1.25.1.30.1.5ColumnextremeWirelessProbeInfoRateIEread-onlycurrentThis gives the rate IE as recieved in the last PROBE REQ packet. It is encoded as a TLV exactly as it was in the frame. This field may return NULL if storing o…
1.3.6.1.4.1.1916.1.25.1.30.1.6ColumnextremeWirelessProbeInfoFirstSeenread-onlycurrentThis gives the sysUpTime the first time a PROBE REQ was seen from this source.
1.3.6.1.4.1.1916.1.25.1.30.1.7ColumnextremeWirelessProbeInfoLastChangeread-onlycurrentThis gives the sysUpTime the last time a PROBE REQ was seen from this source.
1.3.6.1.4.1.1916.1.25.1.30.1.8ColumnextremeWirelessProbeInfoLastRSSread-onlycurrentThis gives the RSSI from the last PROBE REQ packet received from this station.
1.3.6.1.4.1.1916.1.25.1.30.1.9ColumnextremeWirelessProbeInfoLastRateread-onlycurrentThis gives the rate at which the last packet was received from this station.
1.3.6.1.4.1.1916.1.25.1.30.1.10ColumnextremeWirelessProbeInfoLastChannelread-onlycurrentThis gives the channel on which the last PROBE REQ from this station was heard. PROBE REQs may be heard during an off-channel scan, at which point this may not…
1.3.6.1.4.1.1916.1.25.1.31TableextremeWirelessClientDiagCfgTablenot-accessiblecurrentThis table contains one row per wireless interface. Each row contains configuration values for collection of per-client diagnostic information.
1.3.6.1.4.1.1916.1.25.1.31.1RowextremeWirelessClientDiagCfgEntrynot-accessiblecurrentThere is one entry in this table per virtual interface (SSID).
1.3.6.1.4.1.1916.1.25.1.31.1.1ColumnextremeWirelessClientDiagCfgEnableread-writecurrentSetting this to TRUE enables the collection of historical information on this virtual interface. This implies that stations which send ASSOC or AUTH packets wi…
1.3.6.1.4.1.1916.1.25.1.31.1.2ColumnextremeWirelessClientDiagCfgClearClientread-writecurrentSetting this to the MAC address of a client in the diag tables will clear the counters for that client. The entry will not be removed from the table, but all s…
1.3.6.1.4.1.1916.1.25.1.31.1.3ColumnextremeWirelessClientDiagCfgTableSizeread-writecurrentThis value will configure the maximum size of the diag table. The value is specified in number of entries. A value of 0 implies no upper limit.
1.3.6.1.4.1.1916.1.25.1.31.1.4ColumnextremeWirelessClientDiagCfgTimeoutread-writecurrentThis value will configure the timeout of an entry from the diagnostics tables. The value is given in seconds. A value of 0 implies no timeout.
1.3.6.1.4.1.1916.1.25.1.32TableextremeWirelessClientDiagStatusTablenot-accessiblecurrentThis table contains one entry per virtual interface. Values stored here give current status of the historical client diag feature.
1.3.6.1.4.1.1916.1.25.1.32.1RowextremeWirelessClientDiagStatusEntrynot-accessiblecurrentNote that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.32.1.1ColumnextremeWirelessClientDiagCurrentTableSizeread-onlycurrentThis is the current size, in entries of the client diag tables.
1.3.6.1.4.1.1916.1.25.1.32.1.2ColumnextremeWirelessClientDiagTableWatermarkread-onlycurrentThis is the maximum size the client diag table has been since the last time the statistics were cleared.
1.3.6.1.4.1.1916.1.25.1.32.1.3ColumnextremeWirelessClientDiagTotalOverflowsread-onlycurrentThis is the total number of times an entry has been replaced by a newer entry because there was no room left in the table.
1.3.6.1.4.1.1916.1.25.1.32.1.4ColumnextremeWirelessClientDiagTotalTimeoutsread-onlycurrentThis is the total number of times an entry has been aged-out of the table.
1.3.6.1.4.1.1916.1.25.1.32.1.5ColumnextremeWirelessClientDiagLastElementread-onlycurrentThis is sysUpTime when the last entry was added to the table.
1.3.6.1.4.1.1916.1.25.1.32.1.6ColumnextremeWirelessClientDiagSupportsSpeedCountersread-onlycurrentThis value indicates if this AP supports the speed-based counters from the extremeWirelessClientSpeedCountersTable.
1.3.6.1.4.1.1916.1.25.1.32.1.7ColumnextremeWirelessClientDiagSupportsSizeCountersread-onlycurrentThis value indicates if this AP supports the size-based counters from the extremeWirelessClientMACSizeCounterTable.
1.3.6.1.4.1.1916.1.25.1.32.1.8ColumnextremeWirelessClientDiagSupportsPacketCountersread-onlycurrentThis value indicates if this AP supports the packet-based counters from the extremeWirelessClientPacketCountersTable.
1.3.6.1.4.1.1916.1.25.1.33TableextremeWirelessClientDiagTablenot-accessiblecurrentThis table contains information on a per-client basis. Rows are indexed first by virtual interface, then by client MAC.
1.3.6.1.4.1.1916.1.25.1.33.1RowextremeWirelessClientDiagEntrynot-accessiblecurrentNote that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.33.1.1ColumnextremeWirelessClientDiagMacread-onlycurrentThis is the MAC address of the station this entry describes.
1.3.6.1.4.1.1916.1.25.1.33.1.2ColumnextremeWirelessClientDiagStateWatermarkread-onlycurrentThis is the highest state this client has been in.
1.3.6.1.4.1.1916.1.25.1.33.1.3ColumnextremeWirelessClientDiagEntersInDetectedread-onlycurrentThis is the total number of times the client has entered the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.4ColumnextremeWirelessClientDiagErrorsInDetectedread-onlycurrentThis is the total number of errors this client has experienced since the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.33.1.5ColumnextremeWirelessClientDiagAuthReqInDetectedread-onlycurrentThis is the total number of AUTH REQ packets received from this client while it was in the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.6ColumnextremeWirelessClientDiagOtherReqInDetectedread-onlycurrentThis is the total number of REQ packets received from this client while it was in detected state that were not AUTH REQ packets.
1.3.6.1.4.1.1916.1.25.1.33.1.7ColumnextremeWirelessClientDiagMgmtActionInDetectedread-onlycurrentThis is the total number of times management initiated action (i.e. force-disassociate) was received for this client in the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.8ColumnextremeWirelessClientDiagTimeOutInDetectedread-onlycurrentThis is the total number of timeouts which happened to this client in the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.9ColumnextremeWirelessClientDiagEntersInAuthread-onlycurrentThis is the total number of times the client has entered the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.10ColumnextremeWirelessClientDiagErrorsInAuthread-onlycurrentThis is the total number of times the client has had errors in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.11ColumnextremeWirelessClientDiagAssocReqInAuthread-onlycurrentThis is the total number of ASSOC REQ or REASSOC REQ packets received from this client while in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.12ColumnextremeWirelessClientDiagOtherReqInAuthread-onlycurrentThis is the total number of non-ASSOC/REASSOC packets received from this client while in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.13ColumnextremeWirelessClientDiagMgmtActionInAuthread-onlycurrentThis is the total number of management initiated action which this client experienced while in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.14ColumnextremeWirelessClientDiagTimeOutInAuthread-onlycurrentThis is the total number of times this client timed out while in the authed state.
1.3.6.1.4.1.1916.1.25.1.33.1.15ColumnextremeWirelessClientDiagEntersInAssocread-onlycurrentThis is the total number of times this client has entered the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.16ColumnextremeWirelessClientDiagErrorsInAssocread-onlycurrentThis is the total number of errors this client has had in the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.17ColumnextremeWirelessClientDiagMgmtActionInAssocread-onlycurrentThis is the total number of management actions which have happened to this client in the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.18ColumnextremeWirelessClientDiagTimeOutInAssocread-onlycurrentThis is the total number of times this station has been timed-out in the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.19ColumnextremeWirelessClientDiagEntersInForwardread-onlycurrentThis is the total number of times this client has entered the forwarding state.
1.3.6.1.4.1.1916.1.25.1.33.1.20ColumnextremeWirelessClientDiagMgmtActionInForwardread-onlycurrentThis is the total number of times this client has experience a management action while in forwarding.
1.3.6.1.4.1.1916.1.25.1.33.1.21ColumnextremeWirelessClientDiagTimeOutInForwardread-onlycurrentThis is the total number of timeouts this client has experienced while in forwarding.
1.3.6.1.4.1.1916.1.25.1.33.1.22ColumnextremeWirelessClientDiagTotal802Authsread-onlycurrentThis is the total number of times this client has tried to authenticate using 802.1x.
1.3.6.1.4.1.1916.1.25.1.33.1.23ColumnextremeWirelessClientDiagTotalNetLoginAuthsread-onlycurrentThis is the total number of times this client has tried to authenticate using NetLogin.
1.3.6.1.4.1.1916.1.25.1.34TableextremeWirelessClientAssocInfoTablenot-accessiblecurrentThis table contains one row per client on a wireless interface. It gives information about the association history and parameters of that client.
1.3.6.1.4.1.1916.1.25.1.34.1RowextremeWirelessClientAssocInfoEntrynot-accessiblecurrentNote that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.34.1.1ColumnextremeWirelessClientAssocInfoAssociatedread-onlycurrentThis gives the current MAC-layer association status of this client.
1.3.6.1.4.1.1916.1.25.1.34.1.2ColumnextremeWirelessClientAssocInfoTotalAssocReqread-onlycurrentThis gives the total number of ASSOC REQ pdus recieved from this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.34.1.3ColumnextremeWirelessClientAssocInfoTotalReAssocReqread-onlycurrentThis gives the total number of REASSOC REQ PDUs received from this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.34.1.4ColumnextremeWirelessClientAssocInfoTotalAssocRespread-onlycurrentThis gives the total number of ASSOC RESP pdus sent to this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.34.1.5ColumnextremeWirelessClientAssocInfoTotalAssocOKread-onlycurrentThis gives the total number of ASSOC RESP PDUs which carried a status = ok response.
1.3.6.1.4.1.1916.1.25.1.34.1.6ColumnextremeWirelessClientAssocInfoTotalAssocFailread-onlycurrentThis gives the total number of ASSOC RESP PDUs which carried a status = failed response.
1.3.6.1.4.1.1916.1.25.1.34.1.7ColumnextremeWirelessClientAssocInfoTotalDisassocReqread-onlycurrentThis gives the total number of ASSOC RESP PDUs which carried a status = failed response.
1.3.6.1.4.1.1916.1.25.1.34.1.8ColumnextremeWirelessClientAssocInfoTotalDisassocRespread-onlycurrentThis gives the total number of ASSOC RESP PDUs which carried a status = failed response.
1.3.6.1.4.1.1916.1.25.1.34.1.9ColumnextremeWirelessClientAssocInfoRateIEread-onlycurrentThis is the value of the rate IE carried in the last ASSOC REQ packet if this wireless interface is configured to keep IEs. If it's not, this will be NULL. The…
1.3.6.1.4.1.1916.1.25.1.34.1.10ColumnextremeWirelessClientAssocInfoLastAssocread-onlycurrentThis is sysUpTime when the last ASSOC REQ was received from this client.
1.3.6.1.4.1.1916.1.25.1.34.1.11ColumnextremeWirelessClientAssocInfoLastErrorread-onlycurrentThis is sysUpTime when the last ASSOC RESP was sent to this client with a failure status.
1.3.6.1.4.1.1916.1.25.1.34.1.12ColumnextremeWirelessClientAssocInfoLastErrorTyperead-onlycurrentThis is an enumerated type which indicates which was the last error this client experienced during association.
1.3.6.1.4.1.1916.1.25.1.34.1.13ColumnextremeWirelessClientAssocInfoErrorRateMismatchread-onlycurrentThis is the total number of failed associations due to a mismatch of the rate IEs.
1.3.6.1.4.1.1916.1.25.1.34.1.14ColumnextremeWirelessClientAssocInfoErrorBadStateread-onlycurrentThis is the total number of failed associations due to the client being in the wrong state.
1.3.6.1.4.1.1916.1.25.1.34.1.15ColumnextremeWirelessClientAssocInfoErrorBadCapabilityread-onlycurrentThis is the total number of failed associations due to the client having a capability mismatch with the AP.
1.3.6.1.4.1.1916.1.25.1.34.1.16ColumnextremeWirelessClientAssocInfoErrorCounterMeasureread-onlycurrentThis is the total number of failed associations due to the client being subject to a counter measure.
1.3.6.1.4.1.1916.1.25.1.34.1.17ColumnextremeWirelessClientAssocInfoErrorMcastCipherread-onlycurrentThis is the total number of failed associations due to the client not supporting the current multicast cipher.
1.3.6.1.4.1.1916.1.25.1.34.1.18ColumnextremeWirelessClientAssocInfoErrorMaxAssocread-onlycurrentThis is the total number of failed associations due to the AP having too many associations already.
1.3.6.1.4.1.1916.1.25.1.34.1.19ColumnextremeWirelessClientAssocInfoErrorRSNRequiredread-onlycurrentThis is the total number of failed associations due to the client not supplying the (required) RSN IE.
1.3.6.1.4.1.1916.1.25.1.34.1.20ColumnextremeWirelessClientAssocInfoErrorRSNMismatchread-onlycurrentThis is the total number of failed associations due to the client's RSN IE not matching supported features on the AP.
1.3.6.1.4.1.1916.1.25.1.34.1.21ColumnextremeWirelessClientAssocInfoErrorOtherread-onlycurrentThis is the total number of failed associations due to the client's RSN IE not matching supported features on the AP.
1.3.6.1.4.1.1916.1.25.1.34.1.22ColumnextremeWirelessClientAssocInfoWPAIEPresentread-onlycurrentIf this value is true it indicates that WPA information was gathered from this station in the last association request. If true, it implies the values of the W…
1.3.6.1.4.1.1916.1.25.1.34.1.23ColumnextremeWirelessClientAssocInfoWPAVersionread-onlycurrentThis value gives the version of WPA supported by this station. See IEEE 802.11i Draft 3.0 section 7 for meaning of various values.
1.3.6.1.4.1.1916.1.25.1.34.1.24ColumnextremeWirelessClientAssocInfoWPAIEMcastCipherread-onlycurrentThis value gives the single multicast cipher supported by this client.
1.3.6.1.4.1.1916.1.25.1.34.1.25ColumnextremeWirelessClientAssocInfoWPAUcastCipherCountread-onlycurrentThis gives the number of set bits in the ucast cipher variable below. In this case this number should always be 1.
1.3.6.1.4.1.1916.1.25.1.34.1.26ColumnextremeWirelessClientAssocInfoWPAUcastCipherread-onlycurrentThis gives the cipher suites which was requested by this client during its last assoc req.
1.3.6.1.4.1.1916.1.25.1.34.1.27ColumnextremeWirelessClientAssocInfoWPAKeyMgmtCountread-onlycurrentThis value gives the number of key management suites requested by this client in the last assoc. req message. It indicates the number of set bits in the mgmt s…
1.3.6.1.4.1.1916.1.25.1.34.1.28ColumnextremeWirelessClientAssocInfoWPAKeyMgmtSuiteread-onlycurrentGives the key management suite requested by this client during its last association request.
1.3.6.1.4.1.1916.1.25.1.34.1.29ColumnextremeWirelessClientAssocIEBlobread-onlycurrentThis is the IE list sent in the association frame encoded as a series of TLVs.
1.3.6.1.4.1.1916.1.25.1.35TableextremeWirelessClientAuthInfoTablenot-accessiblecurrentThis table contains one row per client on a wireless interface. It gives information about the authentication history and params of that client.
1.3.6.1.4.1.1916.1.25.1.35.1RowextremeWirelessClientAuthInfoEntrynot-accessiblecurrentNote that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.35.1.1ColumnextremeWirelessClientAuthInfoCurrentAuthread-onlycurrentThis gives the current MAC-layer authentication status of the client.
1.3.6.1.4.1.1916.1.25.1.35.1.2ColumnextremeWirelessClientAuthInfoTotalAuthsread-onlycurrentThis is the total number of AUTH REQ packets received from this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.35.1.3ColumnextremeWirelessClientAuthInfoTotalAuthRespread-onlycurrentThis is the total number of AUTH RESP packets sent to this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.35.1.4ColumnextremeWirelessClientAuthInfoTotalAuthsOKread-onlycurrentThis is the total number of AUTH RESP packets sent to this client which carried a STATUS = OK message.
1.3.6.1.4.1.1916.1.25.1.35.1.5ColumnextremeWirelessClientAuthInfoTotalAuthsFailedread-onlycurrentThis is the total number of AUTH RESP packets sent to this client which carried a STATUS = Failed message.
1.3.6.1.4.1.1916.1.25.1.35.1.6ColumnextremeWirelessClientAuthInfoTotalDeauthReqread-onlycurrentThis is the total number of DEAUTH REQ packets sent from this client.
1.3.6.1.4.1.1916.1.25.1.35.1.7ColumnextremeWirelessClientAuthInfoTotalDeauthRespread-onlycurrentThis is the total number of DEAUTH RESP packets sent to this client.
1.3.6.1.4.1.1916.1.25.1.35.1.8ColumnextremeWirelessClientAuthInfoTotalOpenread-onlycurrentThis is the total number of AUTH REQ packets which requested open authentication from the AP.
1.3.6.1.4.1.1916.1.25.1.35.1.9ColumnextremeWirelessClientAuthInfoTotalSharedread-onlycurrentThis is the total number of AUTH REQ packets which requested shared authentication from the AP.
1.3.6.1.4.1.1916.1.25.1.35.1.10ColumnextremeWirelessClientAuthInfoLastAuthread-onlycurrentThis is the sysUpTime the last time this client sent a request for authentication.
1.3.6.1.4.1.1916.1.25.1.35.1.11ColumnextremeWirelessClientAuthInfoLastAuthTyperead-onlycurrentThis is the last type of authentication requested by this client.
1.3.6.1.4.1.1916.1.25.1.35.1.12ColumnextremeWirelessClientAuthInfoLastErrorread-onlycurrentThis is the sysUpTime of the last authentication failure for this client.
1.3.6.1.4.1.1916.1.25.1.35.1.13ColumnextremeWirelessClientAuthInfoLastErrorTyperead-onlycurrentThis is the OID of the last error counter that was incremented for this client.
1.3.6.1.4.1.1916.1.25.1.35.1.14ColumnextremeWirelessClientAuthInfoErrorResourceFailureread-onlycurrentThis is the total number of authentication failures which have resulted from resource failures.
1.3.6.1.4.1.1916.1.25.1.35.1.15ColumnextremeWirelessClientAuthInfoErrorSequenceNumread-onlycurrentThis is the total number of authentication failures which have resulted from bad packet sequence numbers.
1.3.6.1.4.1.1916.1.25.1.35.1.16ColumnextremeWirelessClientAuthInfoErrorChallengeTextread-onlycurrentThis is the total number of authentication failures which have resutled from challenge text mismatch.
1.3.6.1.4.1.1916.1.25.1.35.1.17ColumnextremeWirelessClientAuthInfoErrorTypeMismatchread-onlycurrentThis is the total number of authentication failures which have resutled from the requested authentication type (i.e. open/shared) not matching what this viruta…
1.3.6.1.4.1.1916.1.25.1.35.1.18ColumnextremeWirelessClientAuthInfoErrorKeyIndexread-onlycurrentThis is the total number of authentication failures which have resulted from key index mismatches.
1.3.6.1.4.1.1916.1.25.1.35.1.19ColumnextremeWirelessClientAuthInfoErrorOtherread-onlycurrentThis is the total number of authentication failures which have resulted from unspecified errors.
1.3.6.1.4.1.1916.1.25.1.36TableextremeWirelessClientMACInfoTablenot-accessiblecurrentThis table contains one entry per source MAC which has tried to authenticate with this virtual interface (SSID). Entries are created when AUTH or REATH REQ pac…
1.3.6.1.4.1.1916.1.25.1.36.1RowextremeWirelessClientMACInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.36.1.1ColumnextremeWirelessClientMACInfoMinRSSread-onlycurrentThis gives the minimum RSS indication of any packet we have seen from this client. A value of 0 indicates that RSSI has been unavailable.
1.3.6.1.4.1.1916.1.25.1.36.1.2ColumnextremeWirelessClientMACInfoMaxRSSread-onlycurrentThis gives the maximum RSS indication of any packet we have seen from this client. A value of 0 indicates that RSSI has been unavailable.
1.3.6.1.4.1.1916.1.25.1.36.1.3ColumnextremeWirelessClientMACInfoAvgRSSread-onlycurrentThis gives the average RSS indication of any packet we have seen from this client. A value of 0 indicates that RSSI has been unavailable.
1.3.6.1.4.1.1916.1.25.1.36.1.4ColumnextremeWirelessClientMACInfoTotalProbeReqread-onlycurrentThis gives the total number of PROBE REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.5ColumnextremeWirelessClientMACInfoTotalAuthReqread-onlycurrentThis gives the total number of AUTH REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.6ColumnextremeWirelessClientMACInfoTotalAssocReqread-onlycurrentThis gives the total number of ASSOC REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.7ColumnextremeWirelessClientMACInfoTotalReAssocReqread-onlycurrentThis gives the total number of REASSOC REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.8ColumnextremeWirelessClientMACInfoTotalDeAssocReqread-onlycurrentThis gives the total number of DEASSOC REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.9ColumnextremeWirelessClientMACInfoTotalDeAuthReqread-onlycurrentThis gives the total number of DEAUTH REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.10ColumnextremeWirelessClientMACInfoTotalPsPollread-onlycurrentThis gives the total number of PS POLL packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.11ColumnextremeWirelessClientMACInfoTotalDataread-onlycurrentThis gives the total number of data frames received from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.12ColumnextremeWirelessClientMACInfoNavValueread-onlycurrentTODO: Is this an average, total, what?
1.3.6.1.4.1.1916.1.25.1.37TableextremeWirelessClientSizeCounterTablenot-accessiblecurrentThere is one entry in this table for each client which has tried to authenticate with this virtual interface. A new entry is created when an AUTH or REATH REQ …
1.3.6.1.4.1.1916.1.25.1.37.1RowextremeWirelessClientSizeCounterEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.37.1.1ColumnextremeWirelessClientFrameSizeReXmit64read-onlycurrentThis gives the number of frags retransmitted to this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.2ColumnextremeWirelessClientFrameSizeReXmit128read-onlycurrentThis gives the number of frags retransmitted to this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.3ColumnextremeWirelessClientFrameSizeReXmit256read-onlycurrentThis gives the number of frags retransmitted to this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.4ColumnextremeWirelessClientFrameSizeReXmit512read-onlycurrentThis gives the number of frags retransmitted to this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.5ColumnextremeWirelessClientFrameSizeReXmit1024read-onlycurrentThis gives the number of frags retransmitted to this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.6ColumnextremeWirelessClientFrameSizeReXmit2048read-onlycurrentThis gives the number of frags retransmitted to this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.7ColumnextremeWirelessClientFrameSizeTX64read-onlycurrentThis gives the number of frags transmitted to this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.8ColumnextremeWirelessClientFrameSizeTX128read-onlycurrentThis gives the number of frags transmitted to this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.9ColumnextremeWirelessClientFrameSizeTX256read-onlycurrentThis gives the number of frags transmitted to this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.10ColumnextremeWirelessClientFrameSizeTX512read-onlycurrentThis gives the number of frags transmitted to this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.11ColumnextremeWirelessClientFrameSizeTX1024read-onlycurrentThis gives the number of frags transmitted to this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.12ColumnextremeWirelessClientFrameSizeTX2048read-onlycurrentThis gives the number of frags transmitted to this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.13ColumnextremeWirelessClientFrameSizeRX64read-onlycurrentThis gives the number of frags received from this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.14ColumnextremeWirelessClientFrameSizeRX128read-onlycurrentThis gives the number of frags received from this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.15ColumnextremeWirelessClientFrameSizeRX256read-onlycurrentThis gives the number of frags received from this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.16ColumnextremeWirelessClientFrameSizeRX512read-onlycurrentThis gives the number of frags received from this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.17ColumnextremeWirelessClientFrameSizeRX1024read-onlycurrentThis gives the number of frags received from this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.18ColumnextremeWirelessClientFrameSizeRX2048read-onlycurrentThis gives the number of frags received from this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.19ColumnextremeWirelessClientFrameSizeErrorTX64read-onlycurrentThis gives the number of frags which failed to be sent from this client with a length between 0 and 64 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.20ColumnextremeWirelessClientFrameSizeErrorTX128read-onlycurrentThis gives the number of frags which failed to be sent from this client with a length between 65 and 128 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.21ColumnextremeWirelessClientFrameSizeErrorTX256read-onlycurrentThis gives the number of frags which failed to be sent from this client with a length between 129 and 256 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.22ColumnextremeWirelessClientFrameSizeErrorTX512read-onlycurrentThis gives the number of frags which failed to be sent from this client with a length between 257 and 512 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.23ColumnextremeWirelessClientFrameSizeErrorTX1024read-onlycurrentThis gives the number of frags which failed to be sent from this client with a length between 513 and 1024 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.24ColumnextremeWirelessClientFrameSizeErrorTX2048read-onlycurrentThis gives the number of frags which failed to be sent from this client with a length between 1025 and 2048 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.25ColumnextremeWirelessClientFrameSizeErrorRX64read-onlycurrentThis gives the number of frags which were received with an FCS or other error and a length between 0 and 64 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.26ColumnextremeWirelessClientFrameSizeErrorRX128read-onlycurrentThis gives the number of frags which were received with an FCS or other error and a length between 65 and 128 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.27ColumnextremeWirelessClientFrameSizeErrorRX256read-onlycurrentThis gives the number of frags which were received with an FCS or other error and a length between 129 and 256 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.28ColumnextremeWirelessClientFrameSizeErrorRX512read-onlycurrentThis gives the number of frags which were received with an FCS or other error and a length between 257 and 512 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.29ColumnextremeWirelessClientFrameSizeErrorRX1024read-onlycurrentThis gives the number of frags which were received with an FCS or other error and a length between 513 and 1024 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.30ColumnextremeWirelessClientFrameSizeErrorRX2048read-onlycurrentThis gives the number of frags which were received with an FCS or other error and a length between 1025 and 2048 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.31ColumnextremeWirelessClientPacketSizeTX64read-onlycurrentThis gives the number of packets transmitted to this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.32ColumnextremeWirelessClientPacketSizeTX128read-onlycurrentThis gives the number of packets transmitted to this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.33ColumnextremeWirelessClientPacketSizeTX256read-onlycurrentThis gives the number of packets transmitted to this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.34ColumnextremeWirelessClientPacketSizeTX512read-onlycurrentThis gives the number of packets transmitted to this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.35ColumnextremeWirelessClientPacketSizeTX1024read-onlycurrentThis gives the number of packets transmitted to this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.36ColumnextremeWirelessClientPacketSizeTX2048read-onlycurrentThis gives the number of packets transmitted to this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.37ColumnextremeWirelessClientPacketSizeRX64read-onlycurrentThis gives the number of packets received from this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.38ColumnextremeWirelessClientPacketSizeRX128read-onlycurrentThis gives the number of packets received from this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.39ColumnextremeWirelessClientPacketSizeRX256read-onlycurrentThis gives the number of packets received from this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.40ColumnextremeWirelessClientPacketSizeRX512read-onlycurrentThis gives the number of packets received from this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.41ColumnextremeWirelessClientPacketSizeRX1024read-onlycurrentThis gives the number of packets received from this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.42ColumnextremeWirelessClientPacketSizeRX2048read-onlycurrentThis gives the number of packets received from this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.38TableextremeWirelessClientSpeedCounterTablenot-accessiblecurrentThis table is indexed by wireless interface index. These are the virtual interfaces corresponding to the SSID. Support for this table is optional, indicated by…
1.3.6.1.4.1.1916.1.25.1.38.1RowextremeWirelessClientSpeedCounterEntrynot-accessiblecurrentThe ifIndex here is the wireless interface (SSID). It is expected that an entry will be created in this table only after a client sends a AUTH or REATH packet …
1.3.6.1.4.1.1916.1.25.1.38.1.1ColumnextremeWirelessClientSpeedReXmit1read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.2ColumnextremeWirelessClientSpeedReXmit2read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.3ColumnextremeWirelessClientSpeedReXmit5p5read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.4ColumnextremeWirelessClientSpeedReXmit6read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.5ColumnextremeWirelessClientSpeedReXmit9read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.6ColumnextremeWirelessClientSpeedReXmit12read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.7ColumnextremeWirelessClientSpeedReXmit18read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.8ColumnextremeWirelessClientSpeedReXmit24read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.9ColumnextremeWirelessClientSpeedReXmit36read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.10ColumnextremeWirelessClientSpeedReXmit48read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.11ColumnextremeWirelessClientSpeedReXmit54read-onlycurrentThis gives the number of frags which were retransmitted to the given client at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.12ColumnextremeWirelessClientSpeedTX1read-onlycurrentThis gives the number of frags which were transmitted to the given client at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.13ColumnextremeWirelessClientSpeedTX2read-onlycurrentThis gives the number of frags which were transmitted to the given client at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.14ColumnextremeWirelessClientSpeedTX5p5read-onlycurrentThis gives the number of frags which were transmitted to the given client at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.15ColumnextremeWirelessClientSpeedTX6read-onlycurrentThis gives the number of frags which were transmitted to the given client at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.16ColumnextremeWirelessClientSpeedTX9read-onlycurrentThis gives the number of frags which were transmitted to the given client at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.17ColumnextremeWirelessClientSpeedTX12read-onlycurrentThis gives the number of frags which were transmitted to the given client at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.18ColumnextremeWirelessClientSpeedTX18read-onlycurrentThis gives the number of frags which were transmitted to the given client at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.19ColumnextremeWirelessClientSpeedTX24read-onlycurrentThis gives the number of frags which were transmitted to the given client at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.20ColumnextremeWirelessClientSpeedTX36read-onlycurrentThis gives the number of frags which were transmitted to the given client at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.21ColumnextremeWirelessClientSpeedTX48read-onlycurrentThis gives the number of frags which were transmitted to the given client at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.22ColumnextremeWirelessClientSpeedTX54read-onlycurrentThis gives the number of frags which were transmitted to the given client at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.23ColumnextremeWirelessClientSpeedRX1read-onlycurrentThis gives the number of frags which were received from the given client at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.24ColumnextremeWirelessClientSpeedRX2read-onlycurrentThis gives the number of frags which were received from the given client at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.25ColumnextremeWirelessClientSpeedRX5p5read-onlycurrentThis gives the number of frags which were received from the given client at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.26ColumnextremeWirelessClientSpeedRX6read-onlycurrentThis gives the number of frags which were received from the given client at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.27ColumnextremeWirelessClientSpeedRX9read-onlycurrentThis gives the number of frags which were received from the given client at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.28ColumnextremeWirelessClientSpeedRX12read-onlycurrentThis gives the number of frags which were received from the given client at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.29ColumnextremeWirelessClientSpeedRX18read-onlycurrentThis gives the number of frags which were received from the given client at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.30ColumnextremeWirelessClientSpeedRX24read-onlycurrentThis gives the number of frags which were received from the given client at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.31ColumnextremeWirelessClientSpeedRX36read-onlycurrentThis gives the number of frags which were received from the given client at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.32ColumnextremeWirelessClientSpeedRX48read-onlycurrentThis gives the number of frags which were received from the given client at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.33ColumnextremeWirelessClientSpeedRX54read-onlycurrentThis gives the number of frags which were received from the given client at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.39TableextremeWirelessIntfFrameSizeTablenot-accessiblecurrentThere is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtu…
1.3.6.1.4.1.1916.1.25.1.39.1RowextremeWirelessIntfFrameSizeEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.39.1.1ColumnextremeWirelessIntfFrameSizeMgmtTX64read-onlycurrentThis gives the number of management-type frames transmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.2ColumnextremeWirelessIntfFrameSizeMgmtTX128read-onlycurrentThis gives the number of management-type frames transmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.3ColumnextremeWirelessIntfFrameSizeMgmtTX256read-onlycurrentThis gives the number of management-type frames transmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.4ColumnextremeWirelessIntfFrameSizeMgmtTX512read-onlycurrentThis gives the number of management-type frames transmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.5ColumnextremeWirelessIntfFrameSizeMgmtTX1024read-onlycurrentThis gives the number of management-type frames transmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.6ColumnextremeWirelessIntfFrameSizeMgmtTX2048read-onlycurrentThis gives the number of management-type frames transmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.7ColumnextremeWirelessIntfFrameSizeMgmtRX64read-onlycurrentThis gives the number of management-type frames received on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.8ColumnextremeWirelessIntfFrameSizeMgmtRX128read-onlycurrentThis gives the number of management-type frames received on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.9ColumnextremeWirelessIntfFrameSizeMgmtRX256read-onlycurrentThis gives the number of management-type frames received on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.10ColumnextremeWirelessIntfFrameSizeMgmtRX512read-onlycurrentThis gives the number of management-type frames received on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.11ColumnextremeWirelessIntfFrameSizeMgmtRX1024read-onlycurrentThis gives the number of management-type frames received on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.12ColumnextremeWirelessIntfFrameSizeMgmtRX2048read-onlycurrentThis gives the number of management-type frames received on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.13ColumnextremeWirelessIntfFrameSizeCtlTX64read-onlycurrentThis gives the number of control-type frames transmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.14ColumnextremeWirelessIntfFrameSizeCtlTX128read-onlycurrentThis gives the number of control-type frames transmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.15ColumnextremeWirelessIntfFrameSizeCtlTX256read-onlycurrentThis gives the number of control-type frames transmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.16ColumnextremeWirelessIntfFrameSizeCtlTX512read-onlycurrentThis gives the number of control-type frames transmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.17ColumnextremeWirelessIntfFrameSizeCtlTX1024read-onlycurrentThis gives the number of control-type frames transmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.18ColumnextremeWirelessIntfFrameSizeCtlTX2048read-onlycurrentThis gives the number of control-type frames transmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.19ColumnextremeWirelessIntfFrameSizeCtlRX64read-onlycurrentThis gives the number of control-type frames received on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.20ColumnextremeWirelessIntfFrameSizeCtlRX128read-onlycurrentThis gives the number of control-type frames received on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.21ColumnextremeWirelessIntfFrameSizeCtlRX256read-onlycurrentThis gives the number of control-type frames received on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.22ColumnextremeWirelessIntfFrameSizeCtlRX512read-onlycurrentThis gives the number of control-type frames received on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.23ColumnextremeWirelessIntfFrameSizeCtlRX1024read-onlycurrentThis gives the number of control-type frames received on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.24ColumnextremeWirelessIntfFrameSizeCtlRX2048read-onlycurrentThis gives the number of control-type frames received on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.25ColumnextremeWirelessIntfFrameSizeDataTX64read-onlycurrentThis gives the number of data-type frames transmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.26ColumnextremeWirelessIntfFrameSizeDataTX128read-onlycurrentThis gives the number of data-type frames transmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.27ColumnextremeWirelessIntfFrameSizeDataTX256read-onlycurrentThis gives the number of data-type frames transmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.28ColumnextremeWirelessIntfFrameSizeDataTX512read-onlycurrentThis gives the number of data-type frames transmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.29ColumnextremeWirelessIntfFrameSizeDataTX1024read-onlycurrentThis gives the number of data-type frames transmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.30ColumnextremeWirelessIntfFrameSizeDataTX2048read-onlycurrentThis gives the number of data-type frames transmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.31ColumnextremeWirelessIntfFrameSizeDataRX64read-onlycurrentThis gives the number of data-type frames received on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.32ColumnextremeWirelessIntfFrameSizeDataRX128read-onlycurrentThis gives the number of data-type frames received on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.33ColumnextremeWirelessIntfFrameSizeDataRX256read-onlycurrentThis gives the number of data-type frames received on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.34ColumnextremeWirelessIntfFrameSizeDataRX512read-onlycurrentThis gives the number of data-type frames received on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.35ColumnextremeWirelessIntfFrameSizeDataRX1024read-onlycurrentThis gives the number of data-type frames received on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.36ColumnextremeWirelessIntfFrameSizeDataRX2048read-onlycurrentThis gives the number of data-type frames received on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40TableextremeWirelessIntfFrameSizeErrorTablenot-accessiblecurrentThere is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtu…
1.3.6.1.4.1.1916.1.25.1.40.1RowextremeWirelessIntfFrameSizeErrorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.40.1.1ColumnextremeWirelessIntfFrameSizeReXmit64read-onlycurrentThis gives the number of frames retransmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.2ColumnextremeWirelessIntfFrameSizeReXmit128read-onlycurrentThis gives the number of frames retransmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.3ColumnextremeWirelessIntfFrameSizeReXmit256read-onlycurrentThis gives the number of frames retransmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.4ColumnextremeWirelessIntfFrameSizeReXmit512read-onlycurrentThis gives the number of frames retransmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.5ColumnextremeWirelessIntfFrameSizeReXmit1024read-onlycurrentThis gives the number of frames retransmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.6ColumnextremeWirelessIntfFrameSizeReXmit2048read-onlycurrentThis gives the number of frames retransmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.7ColumnextremeWirelessIntfFrameSizeErrorTX64read-onlycurrentThis gives the number of frames which failed to be transmitted interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.8ColumnextremeWirelessIntfFrameSizeErrorTX128read-onlycurrentThis gives the number of frames which failed to be transmitted interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.9ColumnextremeWirelessIntfFrameSizeErrorTX256read-onlycurrentThis gives the number of frames which failed to be transmitted interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.10ColumnextremeWirelessIntfFrameSizeErrorTX512read-onlycurrentThis gives the number of frames which failed to be transmitted interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.11ColumnextremeWirelessIntfFrameSizeErrorTX1024read-onlycurrentThis gives the number of frames which failed to be transmitted interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.12ColumnextremeWirelessIntfFrameSizeErrorTX2048read-onlycurrentThis gives the number of frames which failed to be transmitted interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.13ColumnextremeWirelessIntfFrameSizeErrorRX64read-onlycurrentThis gives the number of frames which had errors on receive on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.14ColumnextremeWirelessIntfFrameSizeErrorRX128read-onlycurrentThis gives the number of frames which had errors on receive on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.15ColumnextremeWirelessIntfFrameSizeErrorRX256read-onlycurrentThis gives the number of frames which had errors on receive on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.16ColumnextremeWirelessIntfFrameSizeErrorRX512read-onlycurrentThis gives the number of frames which had errors on receive on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.17ColumnextremeWirelessIntfFrameSizeErrorRX1024read-onlycurrentThis gives the number of frames which had errors on receive on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.18ColumnextremeWirelessIntfFrameSizeErrorRX2048read-onlycurrentThis gives the number of frames which had errors on receive on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.41TableextremeWirelessIntfFrameSpeedTablenot-accessiblecurrentThere is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtu…
1.3.6.1.4.1.1916.1.25.1.41.1RowextremeWirelessIntfFrameSpeedEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.41.1.1ColumnextremeWirelessIntfSpeedMgmtTX1read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.2ColumnextremeWirelessIntfSpeedMgmtTX2read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.3ColumnextremeWirelessIntfSpeedMgmtTX5p5read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.4ColumnextremeWirelessIntfSpeedMgmtTX6read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.5ColumnextremeWirelessIntfSpeedMgmtTX9read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.6ColumnextremeWirelessIntfSpeedMgmtTX11read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.7ColumnextremeWirelessIntfSpeedMgmtTX12read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.8ColumnextremeWirelessIntfSpeedMgmtTX18read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.9ColumnextremeWirelessIntfSpeedMgmtTX24read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.10ColumnextremeWirelessIntfSpeedMgmtTX36read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.11ColumnextremeWirelessIntfSpeedMgmtTX48read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.12ColumnextremeWirelessIntfSpeedMgmtTX54read-onlycurrentThis gives the number of management-type frames transmitted on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.13ColumnextremeWirelessIntfSpeedMgmtRX1read-onlycurrentThis gives the number of management-type frames recieved on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.14ColumnextremeWirelessIntfSpeedMgmtRX2read-onlycurrentThis gives the number of management-type frames recieved on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.15ColumnextremeWirelessIntfSpeedMgmtRX5p5read-onlycurrentThis gives the number of management-type frames recieved on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.16ColumnextremeWirelessIntfSpeedMgmtRX6read-onlycurrentThis gives the number of management-type frames recieved on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.17ColumnextremeWirelessIntfSpeedMgmtRX9read-onlycurrentThis gives the number of management-type frames recieved on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.18ColumnextremeWirelessIntfSpeedMgmtRX11read-onlycurrentThis gives the number of management-type frames recieved on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.19ColumnextremeWirelessIntfSpeedMgmtRX12read-onlycurrentThis gives the number of management-type frames recieved on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.20ColumnextremeWirelessIntfSpeedMgmtRX18read-onlycurrentThis gives the number of management-type frames recieved on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.21ColumnextremeWirelessIntfSpeedMgmtRX24read-onlycurrentThis gives the number of management-type frames recieved on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.22ColumnextremeWirelessIntfSpeedMgmtRX36read-onlycurrentThis gives the number of management-type frames recieved on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.23ColumnextremeWirelessIntfSpeedMgmtRX48read-onlycurrentThis gives the number of management-type frames recieved on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.24ColumnextremeWirelessIntfSpeedMgmtRX54read-onlycurrentThis gives the number of management-type frames recieved on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.25ColumnextremeWirelessIntfSpeedCtlTX1read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.26ColumnextremeWirelessIntfSpeedCtlTX2read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.27ColumnextremeWirelessIntfSpeedCtlTX5p5read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.28ColumnextremeWirelessIntfSpeedCtlTX6read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.29ColumnextremeWirelessIntfSpeedCtlTX9read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.30ColumnextremeWirelessIntfSpeedCtlTX11read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.31ColumnextremeWirelessIntfSpeedCtlTX12read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.32ColumnextremeWirelessIntfSpeedCtlTX18read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.33ColumnextremeWirelessIntfSpeedCtlTX24read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.34ColumnextremeWirelessIntfSpeedCtlTX36read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.35ColumnextremeWirelessIntfSpeedCtlTX48read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.36ColumnextremeWirelessIntfSpeedCtlTX54read-onlycurrentThis gives the number of control-type frames transmitted on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.37ColumnextremeWirelessIntfSpeedCtlRX1read-onlycurrentThis gives the number of control-type frames recieved on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.38ColumnextremeWirelessIntfSpeedCtlRX2read-onlycurrentThis gives the number of control-type frames recieved on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.39ColumnextremeWirelessIntfSpeedCtlRX5p5read-onlycurrentThis gives the number of control-type frames recieved on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.40ColumnextremeWirelessIntfSpeedCtlRX6read-onlycurrentThis gives the number of control-type frames recieved on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.41ColumnextremeWirelessIntfSpeedCtlRX9read-onlycurrentThis gives the number of control-type frames recieved on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.42ColumnextremeWirelessIntfSpeedCtlRX11read-onlycurrentThis gives the number of control-type frames recieved on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.43ColumnextremeWirelessIntfSpeedCtlRX12read-onlycurrentThis gives the number of control-type frames recieved on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.44ColumnextremeWirelessIntfSpeedCtlRX18read-onlycurrentThis gives the number of control-type frames recieved on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.45ColumnextremeWirelessIntfSpeedCtlRX24read-onlycurrentThis gives the number of control-type frames recieved on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.46ColumnextremeWirelessIntfSpeedCtlRX36read-onlycurrentThis gives the number of control-type frames recieved on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.47ColumnextremeWirelessIntfSpeedCtlRX48read-onlycurrentThis gives the number of control-type frames recieved on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.48ColumnextremeWirelessIntfSpeedCtlRX54read-onlycurrentThis gives the number of control-type frames recieved on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.49ColumnextremeWirelessIntfSpeedDataTX1read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.50ColumnextremeWirelessIntfSpeedDataTX2read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.51ColumnextremeWirelessIntfSpeedDataTX5p5read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.52ColumnextremeWirelessIntfSpeedDataTX6read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.53ColumnextremeWirelessIntfSpeedDataTX9read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.54ColumnextremeWirelessIntfSpeedDataTX11read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.55ColumnextremeWirelessIntfSpeedDataTX12read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.56ColumnextremeWirelessIntfSpeedDataTX18read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.57ColumnextremeWirelessIntfSpeedDataTX24read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.58ColumnextremeWirelessIntfSpeedDataTX36read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.59ColumnextremeWirelessIntfSpeedDataTX48read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.60ColumnextremeWirelessIntfSpeedDataTX54read-onlycurrentThis gives the number of data-type frames transmitted on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.61ColumnextremeWirelessIntfSpeedDataRX1read-onlycurrentThis gives the number of data-type frames recieved on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.62ColumnextremeWirelessIntfSpeedDataRX2read-onlycurrentThis gives the number of data-type frames recieved on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.63ColumnextremeWirelessIntfSpeedDataRX5p5read-onlycurrentThis gives the number of data-type frames recieved on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.64ColumnextremeWirelessIntfSpeedDataRX6read-onlycurrentThis gives the number of data-type frames recieved on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.65ColumnextremeWirelessIntfSpeedDataRX9read-onlycurrentThis gives the number of data-type frames recieved on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.66ColumnextremeWirelessIntfSpeedDataRX11read-onlycurrentThis gives the number of data-type frames recieved on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.67ColumnextremeWirelessIntfSpeedDataRX12read-onlycurrentThis gives the number of data-type frames recieved on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.68ColumnextremeWirelessIntfSpeedDataRX18read-onlycurrentThis gives the number of data-type frames recieved on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.69ColumnextremeWirelessIntfSpeedDataRX24read-onlycurrentThis gives the number of data-type frames recieved on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.70ColumnextremeWirelessIntfSpeedDataRX36read-onlycurrentThis gives the number of data-type frames recieved on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.71ColumnextremeWirelessIntfSpeedDataRX48read-onlycurrentThis gives the number of data-type frames recieved on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.72ColumnextremeWirelessIntfSpeedDataRX54read-onlycurrentThis gives the number of data-type frames recieved on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.42TableextremeWirelessIntfFrameSpeedErrorTablenot-accessiblecurrentThere is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtu…
1.3.6.1.4.1.1916.1.25.1.42.1RowextremeWirelessIntfFrameSpeedErrorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.42.1.1ColumnextremeWirelessIntfSpeedReXmit1read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.2ColumnextremeWirelessIntfSpeedReXmit2read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.3ColumnextremeWirelessIntfSpeedReXmit5p5read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.4ColumnextremeWirelessIntfSpeedReXmit6read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.5ColumnextremeWirelessIntfSpeedReXmit9read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.6ColumnextremeWirelessIntfSpeedReXmit11read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 11 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.7ColumnextremeWirelessIntfSpeedReXmit12read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.8ColumnextremeWirelessIntfSpeedReXmit18read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.9ColumnextremeWirelessIntfSpeedReXmit24read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.10ColumnextremeWirelessIntfSpeedReXmit36read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.11ColumnextremeWirelessIntfSpeedReXmit48read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.12ColumnextremeWirelessIntfSpeedReXmit54read-onlycurrentThis gives the number of frames which were retransmitted on this interface at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.13ColumnextremeWirelessIntfSpeedErrorTX1read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.14ColumnextremeWirelessIntfSpeedErrorTX2read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.15ColumnextremeWirelessIntfSpeedErrorTX5p5read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.16ColumnextremeWirelessIntfSpeedErrorTX6read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.17ColumnextremeWirelessIntfSpeedErrorTX9read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.18ColumnextremeWirelessIntfSpeedErrorTX11read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.19ColumnextremeWirelessIntfSpeedErrorTX12read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.20ColumnextremeWirelessIntfSpeedErrorTX18read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.21ColumnextremeWirelessIntfSpeedErrorTX24read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.22ColumnextremeWirelessIntfSpeedErrorTX36read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.23ColumnextremeWirelessIntfSpeedErrorTX48read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.24ColumnextremeWirelessIntfSpeedErrorTX54read-onlycurrentThis gives the number of frames which were transmited with errors on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.25ColumnextremeWirelessIntfSpeedErrorRX1read-onlycurrentThis gives the number of frames which were received with errors on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.26ColumnextremeWirelessIntfSpeedErrorRX2read-onlycurrentThis gives the number of frames which were received with errors on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.27ColumnextremeWirelessIntfSpeedErrorRX5p5read-onlycurrentThis gives the number of frames which were received with errors on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.28ColumnextremeWirelessIntfSpeedErrorRX6read-onlycurrentThis gives the number of frames which were received with errors on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.29ColumnextremeWirelessIntfSpeedErrorRX9read-onlycurrentThis gives the number of frames which were received with errors on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.30ColumnextremeWirelessIntfSpeedErrorRX11read-onlycurrentThis gives the number of frames which were received with errors on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.31ColumnextremeWirelessIntfSpeedErrorRX12read-onlycurrentThis gives the number of frames which were received with errors on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.32ColumnextremeWirelessIntfSpeedErrorRX18read-onlycurrentThis gives the number of frames which were received with errors on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.33ColumnextremeWirelessIntfSpeedErrorRX24read-onlycurrentThis gives the number of frames which were received with errors on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.34ColumnextremeWirelessIntfSpeedErrorRX36read-onlycurrentThis gives the number of frames which were received with errors on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.35ColumnextremeWirelessIntfSpeedErrorRX48read-onlycurrentThis gives the number of frames which were received with errors on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.36ColumnextremeWirelessIntfSpeedErrorRX54read-onlycurrentThis gives the number of frames which were received with errors on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.43TableextremeWirelessIntfUtilizationTablenot-accessiblecurrentThere is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtu…
1.3.6.1.4.1.1916.1.25.1.43.1RowextremeWirelessIntfUtilizationEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.43.1.1ColumnextremeWirelessIntfUtilizationNavread-onlycurrentThis gives the instantaneous NAV value on this interface, or some increasing-metric of utilization.
1.3.6.1.4.1.1916.1.25.1.43.1.2ColumnextremeWirelessIntfUtilizationNoiseFloorread-onlycurrentThis gives the noise floor in dBm for this interface.
1.3.6.1.4.1.1916.1.25.1.44ScalarextremeWirelessCounterMeasureSourceaccessible-for-notifycurrentThis value is used in the counter measure traps to indicate the reason that counter measures have been invoked.
1.3.6.1.4.1.1916.1.25.1.47TableextremeWirelessClientWPAStatsTablenot-accessiblecurrentThis table contains information of the WPA state transitions on a per-client basis. Rows are indexed first by virtual interface, then by client MAC.
1.3.6.1.4.1.1916.1.25.1.47.1RowextremeWirelessClientWPAStatsEntrynot-accessiblecurrentNote that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.47.1.1ColumnextremeWirelessClientWPAStatsStartsread-onlycurrentNumber of starts of the WPA key exchange process
1.3.6.1.4.1.1916.1.25.1.47.1.2ColumnextremeWirelessClientWPAStatsPairwiseKeySuccessesread-onlycurrentNumber of successes in the pairwise key handshake
1.3.6.1.4.1.1916.1.25.1.47.1.3ColumnextremeWirelessClientWPAStatsPairwiseKeyFailuresread-onlycurrentNumber of failures the pairwise key handshake
1.3.6.1.4.1.1916.1.25.1.47.1.4ColumnextremeWirelessClientWPAStatsGroupKeySuccessesread-onlycurrentNumber of successes of the group key exchange
1.3.6.1.4.1.1916.1.25.1.47.1.5ColumnextremeWirelessClientWPAStatsGroupKeyFailuresread-onlycurrentNumber of failures of the group key handshake
1.3.6.1.4.1.1916.1.25.1.47.1.6ColumnextremeWirelessClientWPAStatsPairwiseKey1Sendsread-onlycurrentNumber of times the first packet of the pairwise key exchange was sent.
1.3.6.1.4.1.1916.1.25.1.47.1.7ColumnextremeWirelessClientWPAStatsPairwiseKey3Sendsread-onlycurrentNumber of times the third packet of the pairwise key exchange was sent.
1.3.6.1.4.1.1916.1.25.1.47.1.8ColumnextremeWirelessClientWPAStatsGroupKeySendsread-onlycurrentNumber of times the group key packet was sent.
1.3.6.1.4.1.1916.1.25.1.47.1.9ColumnextremeWirelessClientWPAStatsEAPOLKeyReceivedInPairwise1Keyread-onlycurrentNumber of times an EAPOL Key packet was recieved after sending the 1st pairwise key exchange packet
1.3.6.1.4.1.1916.1.25.1.47.1.10ColumnextremeWirelessClientWPAStatsEAPOLKeyReceivedInPairwise3Keyread-onlycurrentNumber of times an EAPOL Key packet was recieved after sending the 3rd pairwise key exchange packet
1.3.6.1.4.1.1916.1.25.1.47.1.11ColumnextremeWirelessClientWPAStatsEAPOLKeyReceivedInGroupKeyread-onlycurrentNumber of times an EAPOL Key packet was recieved after sending the group key packet
1.3.6.1.4.1.1916.1.25.1.47.1.12ColumnextremeWirelessClientWPAStatsDoubleEAPOLKeyReceivedread-onlycurrentNumber of times an EAPOL Key packet was recieved when already processing a previous key packet.
1.3.6.1.4.1.1916.1.25.1.47.1.13ColumnextremeWirelessClientWPAStatsEAPOLKeyIgnoresread-onlycurrentNumber of times an EAPOL Key packet was ignored.
1.3.6.1.4.1.1916.1.25.1.47.1.14ColumnextremeWirelessClientWPAStatsEAPOLKeyErrorsread-onlycurrentNumber of times an EAPOL Key packet was errored.
1.3.6.1.4.1.1916.1.25.1.47.1.15ColumnextremeWirelessClientWPAStatsEAPOLKeyAbortsread-onlycurrentNumber of times an EAPOL Key packet caused the WPA state machine to abort.
1.3.6.1.4.1.1916.1.25.1.47.1.16ColumnextremeWirelessClientWPAStatsEAPOLKeyVerificationSuccessesread-onlycurrentNumber of times an EAPOL Key packet was verified correctly.
1.3.6.1.4.1.1916.1.25.1.99TableextremeWirelessOpaqueTablenot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.99.1RowextremeWirelessOpaqueEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.99.1.1ColumnextremeWirelessClientDataread-onlycurrent
1.3.6.1.4.1.1916.1.25.1.99.1.2ColumnextremeWirelessPAEStatsDataread-onlycurrent
1.3.6.1.4.1.1916.1.25.1.99.1.3ColumnextremeWirelessPAEDiagDataread-onlycurrent
1.3.6.1.4.1.1916.1.25.1.99.1.4ColumnextremeWirelessScanResultsDataread-onlycurrentThis is the contents of the scan results table encoded as a series of TLVs.
1.3.6.1.4.1.1916.1.25.1.99.1.5ColumnextremeWirelessProbeInfoDataread-onlycurrentThis is the contents of the probe info table encoded as a series of TLVs. Each item is encoded as the entry above.
1.3.6.1.4.1.1916.1.25.1.99.1.6ColumnextremeWirelessClientDiagDataread-onlycurrentThis is the contents of the client diag table encoded as a series of TLVs. Each item is encoded as the entry above.
1.3.6.1.4.1.1916.1.25.1.99.1.7ColumnextremeWirelessClientAssocDataread-onlycurrentThis is the contents of the client assoc table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a m…
1.3.6.1.4.1.1916.1.25.1.99.1.8ColumnextremeWirelessClientAuthDataread-onlycurrentThis is the contents of the client auth table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a me…
1.3.6.1.4.1.1916.1.25.1.99.1.9ColumnextremeWirelessClientMACInfoDataread-onlycurrentThis is the contents of the client MAC info table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not …
1.3.6.1.4.1.1916.1.25.1.99.1.10ColumnextremeWirelessSizeCounterDataread-onlycurrentThis is the contents of the client size counter table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is …
1.3.6.1.4.1.1916.1.25.1.99.1.11ColumnextremeWirelessSpeedCounterDataread-onlycurrentThis is the contents of the client speed counter table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is…
1.3.6.1.4.1.1916.1.25.1.100TableextremeWirelessTraceTablenot-accessiblecurrentThis table contains one entry per wireless port. This allows access to various stastics about the tracing mod ule on that wireless port.
1.3.6.1.4.1.1916.1.25.1.100.1RowextremeWirelessTraceEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.100.1.1ColumnextremeWirelessTraceMsgsOutread-onlycurrentThis gives the number of trace messages the system has sent out to the syslog server. Suppressed messages are not counted toward this total.
1.3.6.1.4.1.1916.1.25.1.100.1.2ColumnextremeWirelessTraceBytesOutread-onlycurrentThis give the number of bytes total sent out by the trace system. This is a simple sum of the string lengths of all messages sent out.
1.3.6.1.4.1.1916.1.25.1.100.1.3ColumnextremeWirelessTraceSuppressedread-onlycurrentThis variable is incremented whenever a message is not sent out because the trace level of that system is lower than the message level.
1.3.6.1.4.1.1916.1.25.1.100.1.4ColumnextremeWirelessTraceOtherErrread-onlycurrentThis variable is incremented when a message is not sent out due to internal errors (i.e. out of memory).
1.3.6.1.4.1.1916.1.25.1.100.1.5ColumnextremeWirelessTraceOpaqueread-onlycurrentThis is the opaque representation of the module table to optimize retreival.
1.3.6.1.4.1.1916.1.25.1.101TableextremeWirelessTraceModuleTablenot-accessiblecurrentThis table contains one entry per trace module. Each entry is indexed by an arbitrary integer value.
1.3.6.1.4.1.1916.1.25.1.101.1RowextremeWirelessTraceModuleEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.1.101.1.1ColumnextremeWirelessTraceModuleIdnot-accessiblecurrentThis is an arbitrary integer index which is assigned to each trace module.
1.3.6.1.4.1.1916.1.25.1.101.1.2ColumnextremeWirelessTraceModuleDescread-onlycurrentThis is a string which briefly describes the purpose of this debug trace. It may include whitespace. An example is: 802.1x State Machine
1.3.6.1.4.1.1916.1.25.1.101.1.3ColumnextremeWirelessTraceModuleHeaderread-onlycurrentThis is a string which is prepended to the syslog messages sent out by this debug level. It is short (5-6 characters) and does not contain white space. (i.e. D…
1.3.6.1.4.1.1916.1.25.1.101.1.4ColumnextremeWirelessTraceModuleLevelread-writecurrentThis value is the current debug level for this module. A lower value indicates that fewer messages will be generated by the component. A write on this value wi…
1.3.6.1.4.1.1916.1.25.1.101.1.5ColumnextremeWirelessTraceModuleSuppressedread-onlycurrentThis value indicates the number of messages logged by this module which have not been sent out because the current log level is less than the level at which th…
1.3.6.1.4.1.1916.1.25.1.101.1.6ColumnextremeWirelessTraceModuleMsgsOutread-onlycurrentThis value indicates the number messages which have been logged by this component.
1.3.6.1.4.1.1916.1.25.1.101.1.7ColumnextremeWirelessTraceModuleBytesOutread-onlycurrentThis value indicates the number of bytes which have been logged by this component. This count includes the header specified in extremeWirelessTraceModuleHeader.
1.3.6.1.4.1.1916.1.25.1.102TableextremeWirelessLogDiagTablenot-accessiblecurrentThis table contains counters per-log level for the event log, syslog and NVRAM subsystems for logging.
1.3.6.1.4.1.1916.1.25.1.102.1RowextremeWirelessLogDiagEntrynot-accessiblecurrentThere is one entry in this table per physical port.
1.3.6.1.4.1.1916.1.25.1.102.1.1ColumnextremeWirelessLogDiagEventLogTotalCountread-onlycurrentThis gives the total number of messages logged since the last time the statistics were cleared.
1.3.6.1.4.1.1916.1.25.1.102.1.2ColumnextremeWirelessLogDiagEventLogTotalEmergCountread-onlycurrentThis gives the total number of messages logged at the EMERG level.
1.3.6.1.4.1.1916.1.25.1.102.1.3ColumnextremeWirelessLogDiagEventLogTotalAlertCountread-onlycurrentThis gives the total number of messages logged at the ALERT level.
1.3.6.1.4.1.1916.1.25.1.102.1.4ColumnextremeWirelessLogDiagEventLogTotalCritCountread-onlycurrentThis gives the total number of messages logged at the CRIT level.
1.3.6.1.4.1.1916.1.25.1.102.1.5ColumnextremeWirelessLogDiagEventLogTotalErrorCountread-onlycurrentThis gives the total number of messages logged at the ERROR level.
1.3.6.1.4.1.1916.1.25.1.102.1.6ColumnextremeWirelessLogDiagEventLogTotalWarnCountread-onlycurrentThis gives the total number of messages logged at the WARN level.
1.3.6.1.4.1.1916.1.25.1.102.1.7ColumnextremeWirelessLogDiagEventLogTotalNoticeCountread-onlycurrentThis gives the total number of messages logged at the NOTICE level.
1.3.6.1.4.1.1916.1.25.1.102.1.8ColumnextremeWirelessLogDiagEventLogTotalInfoCountread-onlycurrentThis gives the total number of messages logged at the INFO level.
1.3.6.1.4.1.1916.1.25.1.102.1.9ColumnextremeWirelessLogDiagEventLogTotalDebugCountread-onlycurrentThis gives the total number of messages logged at the DEBUG level.
1.3.6.1.4.1.1916.1.25.1.102.1.10ColumnextremeWirelessLogDiagEventLogTotalSuppressedCountread-onlycurrentThis gives the total number of messages which were suppressed due to log level.
1.3.6.1.4.1.1916.1.25.1.102.1.11ColumnextremeWirelessLogDiagEventLogTotalByteCountread-onlycurrentThis gives the total number of bytes logged by the logging subsystem.
1.3.6.1.4.1.1916.1.25.1.102.1.12ColumnextremeWirelessLogDiagSyslogTotalEventCountread-onlycurrentThis gives the total number of messages which have been sent out to remote syslog servers.
1.3.6.1.4.1.1916.1.25.1.102.1.13ColumnextremeWirelessLogDiagSyslogTotalSuppressedCountread-onlycurrentThis gives the total number of syslog messages which have been suppressed due to log level.
1.3.6.1.4.1.1916.1.25.1.102.1.14ColumnextremeWirelessLogDiagSyslogTotalByteCountread-onlycurrentThis gives the total number of bytes of syslog messages which have been logged.
1.3.6.1.4.1.1916.1.25.1.102.1.15ColumnextremeWirelessLogDiagNVRAMTotalEventCountread-onlycurrentTotal number of messages which have been logged to NVRAM.
1.3.6.1.4.1.1916.1.25.1.102.1.16ColumnextremeWirelessLogDiagNVRAMTotalSuppressedCountread-onlycurrentTotal number of messages which have been suppressed by NVRAM due to NVRAM threashold.
1.3.6.1.4.1.1916.1.25.1.102.1.17ColumnextremeWirelessLogDiagNVRAMTotalDroppedCountread-onlycurrentTotal number of messages which have been dropped by the NVRAM.
1.3.6.1.4.1.1916.1.25.1.102.1.18ColumnextremeWirelessLogDiagNVRAMTotalByteCountread-onlycurrentTotal number of bytes which have been written to the NVRAM.
1.3.6.1.4.1.1916.1.25.1.102.1.19ColumnextremeWirelessLogDiagClearStatsread-writecurrentSetting this value to TRUE causes the statistics to be reset to 0. Reading this value has no meaning.
1.3.6.1.4.1.1916.1.25.2NodeextremeLAC
1.3.6.1.4.1.1916.1.25.2.1NodeextremeLACGeneral
1.3.6.1.4.1.1916.1.25.2.1.1ScalarextremeAPTotalAuthFailuresread-onlycurrentThis variable gives the total number of Authentication failures that have been seen by all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.2ScalarextremeAPTotalDetectedStationsread-onlycurrentThis variable gives the total number of detected stations on all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.3ScalarextremeAPTotalAssociatedStationsread-onlycurrentThis variable gives the total number of associated stations on all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.4ScalarextremeAPTotalAuthenticatedStationsread-onlycurrentThis variable gives the total number of authenticated stations on all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.5ScalarextremeWirelessCfgMgmtVLANread-writecurrentThis value indicates the VLAN tag that should be applied to all control traffic between the AP and the platform.
1.3.6.1.4.1.1916.1.25.2.1.6ScalarextremeWirelessCfgNetmaskread-writecurrentThis value is the subnet of the Mgmt Vlan
1.3.6.1.4.1.1916.1.25.2.1.7ScalarextremeWirelessCfgGatewayread-writecurrentThis value is assigned to the APs as the gateway for the management vlan.
1.3.6.1.4.1.1916.1.25.2.1.8ScalarextremeWirelessCfgEnableWirelessTrapsread-writecurrentIf set to TRUE the wireless port will send traps for Authentication and association events. If set to FALSE no traps will be generated. Note: We always generat…
1.3.6.1.4.1.1916.1.25.2.1.10ScalarextremeWirelessCfgCountryCoderead-writecurrentThis variable allows configuration of the country code in which the AP will operate. Setting this value will enable the AP to range check frequency and other r…
1.3.6.1.4.1.1916.1.25.2.2NodeextremeProfile
1.3.6.1.4.1.1916.1.25.2.2.1NodeextremeRFProfile
1.3.6.1.4.1.1916.1.25.2.2.1.1TableextremeRFProfileTablenot-accessiblecurrentThere is one entry in this table for each RF profile defined on the LAC. Configuration for wireless intf. should only be done by manipulating these variables. …
1.3.6.1.4.1.1916.1.25.2.2.1.1.1RowextremeRFProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.1ColumnextremeRFProfileIndexnot-accessiblecurrentInteger index for this table. This is here to avoid having to index into the table via the string name.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.2ColumnextremeRFProfileNameread-createcurrentString name of this profile. The value |default| is a special token and should not be allowed.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.3ColumnextremeRFProfileTyperead-createcurrentThis is the type of this RF profile. This will decide the ranges of some of the values (i.e. channel).
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.5ColumnextremeRFProfileBeaconIntervalread-createcurrentThis is the number of TU between beacon frames.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.6ColumnextremeRFProfileDTIMread-createcurrent
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.7ColumnextremeRFProfileFragLengthread-createcurrent
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.8ColumnextremeRFProfileRTSThreshread-createcurrent
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.9ColumnextremeRFProfilePreambleread-createcurrentThis changes the 802 preamble expected by the interface.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.11ColumnextremeRFProfileShortRetryread-createcurrentAttribute indicates the maximum number of transmission attempts of a frame whose size is <= RTS.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.12ColumnextremeRFProfileLongRetryread-createcurrentAttribute indicates the maximum number of transmission attempts of a frame whose size is > RTS.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.13ColumnextremeRFProfileStatusread-createcurrentStandard row-status semantics.
1.3.6.1.4.1.1916.1.25.2.2.2NodeextremeSecurityProfile
1.3.6.1.4.1.1916.1.25.2.2.2.1TableextremeSecurityProfileTablenot-accessiblecurrentThere is one entry in this table per security profile on the LAC. Each profile is identified by a string name.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1RowextremeSecurityProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.1ColumnextremeSecurityProfileIndexnot-accessiblecurrentThis is an integer index used instead of string name.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.2ColumnextremeSecurityProfileNameread-createcurrentThis is a unique string name which identifies this profile. The token |default| is special and should not be allowed.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.3ColumnextremeSecurityProfileESSNameread-createcurrentThis is the desired ESS name.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.4ColumnextremeSecurityProfileSSIDInBeaconread-createcurrentSetting this value to true will have the channel place the ssid in the beacon frame.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.5ColumnextremeSecurityProfileDot11AuthModenot-accessiblecurrentSpecified whether to use open or shared authentication
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.6ColumnextremeSecurityProfileNetworkAuthModenot-accessiblecurrentThis specifies the authentication to use on top of dot11 mac authentication
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.7ColumnextremeSecurityProfileDataVlannot-accessiblecurrentThis specifies the VLAN to use in case it does not come back as a VSA or in case the IgnoreVSAVlan is set to true
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.8ColumnextremeSecurityProfileIgnoreVSAVlanread-createcurrentThis specifies if Vlan associations in VSAs from the radius server has to be ignored or not
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.9ColumnextremeSecurityWEPDefaultKeyread-createcurrentThis value indicates the index in extremeWEPKeyTable that identifies the key this interface will use to decrypt packets.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.10ColumnextremeSecurityProfileEncryptionLengthread-createcurrentThis gives the size in bits of the key. This variable defines the length of all WEP keys and also the encryption to use in case of legacy dot1x. If the encrypt…
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.11ColumnextremeSecurityProfileStatusread-createcurrentStandard row-creation semantics.
1.3.6.1.4.1.1916.1.25.2.2.2.2TableextremeSecurityDot1xConfigTablenot-accessiblecurrentThere is one entry in this table per security profile on the LAC. It reflects the dot1x security config
1.3.6.1.4.1.1916.1.25.2.2.2.2.1RowextremeSecurityDot1xConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.1ColumnextremeSecurityKeyMgmtSuiteread-writecurrentThis bitmask configures the authentication suites to be used.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.2ColumnextremeSecurityMcastCipherSuiteread-writecurrentThis configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic is derived from this using the following algorithm: Mcas…
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.3ColumnextremeSecurityDot1xPSKValueread-writecurrentThe Pre-Shared Key (PSK) for when RSN in PSK mode is the selected authentication suite.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.4ColumnextremeSecurityDot1xPSKPassPhraseread-writecurrentThe PSK, for when WPA in PSK mode is the selected authentication suite, is configured by extremeSecurityKeyMgmtSuite. An alternative manner of setting the PSK …
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.5ColumnextremeSecurityDot1xReAuthPeriodread-writecurrentNumber of seconds a clients authentication will last before the AP automatically issues a reauthentication request.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.6ColumnextremeSecurityGroupUpdateTimeOutread-writecurrentThe time in minutes after which the RSN group update handshake will be retried. The timer shall start at the moment the group update message is sent.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.7ColumnextremeSecurityPairwiseUpdateTimeOutread-writecurrentThe time in minutes after which the RSN 4-way handshake will be retried. The timer shall start at the moment a 4-way message is sent.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.8ColumnextremeSecurityDot11iPreauthEnabledread-writecurrentWhether preauth is enabled or not
1.3.6.1.4.1.1916.1.25.2.2.2.4TableextremeWEPKeyTablenot-accessiblecurrentThis table contains per-profile WEP keys. Reference ieee802dot11.1.2.3.
1.3.6.1.4.1.1916.1.25.2.2.2.4.1RowextremeWEPKeyEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.2.4.1.1ColumnextremeWEPKeyIndexnot-accessiblecurrentThere can be upto 8 wep keys for any wireless interface. Four of the keys are to be used with WEP Authentication, and the other four with MAC Auth.
1.3.6.1.4.1.1916.1.25.2.2.2.4.1.2ColumnextremeWEPKeyread-createcurrentThis is a write-only wep key.
1.3.6.1.4.1.1916.1.25.2.2.2.4.1.3ColumnextremeWEPKeyStatusread-createcurrentStandard row-creation semantics.
1.3.6.1.4.1.1916.1.25.2.2.3TableextremeWirelessPhysInterfaceConfigTablenot-accessiblecurrentThis table contains the configured bindings between physical wireless interfaces and RF profiles and other RF properties. There is one instance of a physical w…
1.3.6.1.4.1.1916.1.25.2.2.3.1RowextremeWirelessPhysInterfaceConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.3.1.1ColumnextremeWirelessPhysInterfaceConfigRFProfileread-createcurrentThis is the index into the extremeRFProfileTable for the RF profile that this wireless interface is bound to. The default value is equivalent to the profile in…
1.3.6.1.4.1.1916.1.25.2.2.3.1.2ColumnextremeWirelessPhysInterfaceConfigRFChannelread-createcurrentThis is the RF channel which has been selected for this wireless interface. It should be one of the supported channels as given by the phy tables in the dot11 …
1.3.6.1.4.1.1916.1.25.2.2.3.1.3ColumnextremeWirelessPhysInterfaceConfigSpeedread-createcurrentThis is the speed to configure the interface at. A value of 0 indicates automatic speed detection.
1.3.6.1.4.1.1916.1.25.2.2.3.1.4ColumnextremeWirelessPhysInterfaceConfigPowerLevelread-createcurrentThis value specifies the tx power (in % of max power) to use.
1.3.6.1.4.1.1916.1.25.2.2.4TableextremeWirelessVirtInterfaceConfigTablenot-accessiblecurrentThis table contains the configured bindings between virtual wireless interfaces and security profiles and other security properties. There are upto 8 virtual i…
1.3.6.1.4.1.1916.1.25.2.2.4.1RowextremeWirelessVirtInterfaceConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.4.1.1ColumnextremeWirelessVirtInterfaceConfigSecurityProfileread-writecurrentThis is the index into the extremeSecurityProfileTable for the security profile that this wireless interface is bound to. The default value is equivalent to th…
1.3.6.1.4.1.1916.1.25.2.2.4.1.2ColumnextremeWirelessVirtInterfaceConfigMaxClientsread-onlycurrentThe maximum number of clients that can associate with this virtual interface.
1.3.6.1.4.1.1916.1.25.2.2.4.1.3ColumnextremeWirelessVirtInterfaceConfigWirelessBridgingread-writecurrentThis specifies whether wireless bridging is enabled on this interface. If wireless bridging is enabled then traffic originating from a client on this interface…
1.3.6.1.4.1.1916.1.25.2.2.4.1.4ColumnextremeWirelessVirtInterfaceConfigStateread-writecurrentThis value specifies whether the virtual interface is active or not
1.3.6.1.4.1.1916.1.25.2.2.5NodeextremeAntennaProfile
1.3.6.1.4.1.1916.1.25.2.2.5.1TableextremeAntennaProfileTablenot-accessiblecurrentThere is one entry in this table per antenna profile on the LAC. Each profile is identified by a string name.
1.3.6.1.4.1.1916.1.25.2.2.5.1.1RowextremeAntennaProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.1ColumnextremeAntennaProfileIndexnot-accessiblecurrentThis is an integer index used instead of string name.
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.2ColumnextremeAntennaProfileNameread-createcurrentThis is a unique string name which identifies this profile. The token |default| is special and should not be allowed.
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.3ColumnextremeAntennaProfile2point4GHZGainread-createcurrentThis specifies 2.4GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.4ColumnextremeAntennaProfile5GHZGainread-createcurrentThis specifies 5GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.5ColumnextremeAntennaProfileStatusread-createcurrentStandard row-creation semantics.
1.3.6.1.4.1.1916.1.25.2.2.6NodeextremeWirelessRemoteConnectGlobalCfgGroup
1.3.6.1.4.1.1916.1.25.2.2.6.1ScalarextremeWirelessRemoteConnectGlobalBindingTyperead-writecurrentGlobal Binding Tye
1.3.6.1.4.1.1916.1.25.2.2.7TableextremeWirelessRemoteConnectBindingTablenot-accessiblecurrentThis table specifies the RemoteConnect binding configuration for various ports.
1.3.6.1.4.1.1916.1.25.2.2.7.1RowextremeWirelessRemoteConnectBindingEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.7.1.1ColumnextremeWirelessRemoteConnectBindingPortIndexnot-accessiblecurrentThe index of this binding. This maps one-to-one with the value specified in the CLI. For example, if you say v:1 in the CLI, then this value should be 1.
1.3.6.1.4.1.1916.1.25.2.2.7.1.2ColumnextremeWirelessRemoteConnectBindingIfIndexread-onlycurrentThis is the IF index that is used in the extremeWirelessPortConfigTable etc to refer to this RemoteConnect port.
1.3.6.1.4.1.1916.1.25.2.2.7.1.3ColumnextremeWirelessRemoteConnectBindingTyperead-createcurrentThis is the type of binding. Based on this, one of the following columns will be valid.
1.3.6.1.4.1.1916.1.25.2.2.7.1.4ColumnextremeWirelessRemoteConnectBindingMACread-createcurrentThe MAC address of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to mac-address
1.3.6.1.4.1.1916.1.25.2.2.7.1.5ColumnextremeWirelessRemoteConnectBindingSerialread-createcurrentThe serial number of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to serial-number
1.3.6.1.4.1.1916.1.25.2.2.7.1.6ColumnextremeWirelessRemoteConnectBindingIPAddressTyperead-createcurrentThe IP address type of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.7.1.7ColumnextremeWirelessRemoteConnectBindingIPAddressread-createcurrentThe IP address of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.7.1.8ColumnextremeWirelessRemoteConnectBindingEnabledread-writecurrentAn entry in this table can be created but left as disabled. If you set this variable to True then the RemoteConnect controller will consider this binding when …
1.3.6.1.4.1.1916.1.25.2.2.7.1.9ColumnextremeWirelessRemoteConnectBindingBoundread-writecurrentSpecifies if an AP has come up and has been matched to this binding. If this is true, then the extremeWirelessPortStatus table will have an entry for this Remo…
1.3.6.1.4.1.1916.1.25.2.2.7.1.10ColumnextremeWirelessRemoteConnectBindingRowStatusread-createcurrentRowStatus attribute. When this row is deleted, the binding goes away
1.3.6.1.4.1.1916.1.25.2.2.8TableextremeWirelessRemoteConnectRedirectBindingTablenot-accessiblecurrentThis table specifies the RemoteConnect redirection configuration for various ports.
1.3.6.1.4.1.1916.1.25.2.2.8.1RowextremeWirelessRemoteConnectRedirectBindingEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.8.1.1ColumnextremeWirelessRemoteConnectRedirectBindingIndexnot-accessiblecurrentThe index of this RedirectBinding.
1.3.6.1.4.1.1916.1.25.2.2.8.1.2ColumnextremeWirelessRemoteConnectRedirectBindingTyperead-createcurrentThis is the type of RedirectBinding. Based on this, one of the following columns will be valid.
1.3.6.1.4.1.1916.1.25.2.2.8.1.3ColumnextremeWirelessRemoteConnectRedirectBindingMACread-createcurrentThe MAC address of the AP that will be redirected. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to mac-address
1.3.6.1.4.1.1916.1.25.2.2.8.1.4ColumnextremeWirelessRemoteConnectRedirectBindingSerialread-createcurrentThe serial number of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to serial-numb…
1.3.6.1.4.1.1916.1.25.2.2.8.1.5ColumnextremeWirelessRemoteConnectRedirectBindingIPAddressTyperead-createcurrentThe IP address type of the AP that will be redirected. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.8.1.6ColumnextremeWirelessRemoteConnectRedirectBindingIPAddressread-createcurrentThe IP address of the AP that will be redirected. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.8.1.7ColumnextremeWirelessRemoteConnectRedirectBindAttachSwitchIPAddrTyperead-createcurrentThe IP address type of the slave
1.3.6.1.4.1.1916.1.25.2.2.8.1.8ColumnextremeWirelessRemoteConnectRedirectBindAttachSwitchIPAddrread-createcurrentThe IP address of the slave
1.3.6.1.4.1.1916.1.25.2.2.8.1.9ColumnextremeWirelessRemoteConnectRedirectBindingEnabledread-writecurrentAn entry in this table can be created but left as disabled. If you set this variable to True then the RemoteConnect controller will consider this RedirectBindi…
1.3.6.1.4.1.1916.1.25.2.2.8.1.10ColumnextremeWirelessRemoteConnectRedirectBindingNumRedirectsread-onlycurrentThe number of times this redirect has been invoked.
1.3.6.1.4.1.1916.1.25.2.2.8.1.11ColumnextremeWirelessRemoteConnectRedirectBindingRowStatusread-writecurrentStandard row status semantics.
1.3.6.1.4.1.1916.1.25.2.2.9NodeextremeWirelessRemoteConnectDeviceDBGroup
1.3.6.1.4.1.1916.1.25.2.2.9.1ScalarextremeWirelessRemoteConnectDeviceDBTimeOutread-writecurrentTimeout value for unbound APs entry in seconds. 0 for disable
1.3.6.1.4.1.1916.1.25.2.2.10TableextremeWirelessRemoteConnectUnboundAPsTablenot-accessiblecurrentThis table contains the list of APs that could not be bound or redirected.
1.3.6.1.4.1.1916.1.25.2.2.10.1RowextremeWirelessRemoteConnectUnboundAPsEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.2.10.1.1ColumnextremeWirelessRemoteConnectUnboundAPsIndexnot-accessiblecurrentThe index of this table.
1.3.6.1.4.1.1916.1.25.2.2.10.1.2ColumnextremeWirelessRemoteConnectUnboundAPsMACread-onlycurrentThe MAC address of the unbound AP.
1.3.6.1.4.1.1916.1.25.2.2.10.1.3ColumnextremeWirelessRemoteConnectUnboundAPsSerialread-onlycurrentThe serial number of the unbound AP
1.3.6.1.4.1.1916.1.25.2.2.10.1.4ColumnextremeWirelessRemoteConnectUnboundAPsIPAddressTyperead-onlycurrentThe IP address type of the unbound AP
1.3.6.1.4.1.1916.1.25.2.2.10.1.5ColumnextremeWirelessRemoteConnectUnboundAPsIPAddressread-onlycurrentThe IP address of the unbound AP
1.3.6.1.4.1.1916.1.25.2.2.10.1.6ColumnextremeWirelessRemoteConnectUnboundAPsNumAttemptsread-onlycurrentThe number of times this AP contacted this controller.
1.3.6.1.4.1.1916.1.25.2.2.10.1.7ColumnextremeWirelessRemoteConnectUnboundAPsRowStatusread-createcurrentStandard row status semantics. Only valid value to set is destroy (6).
1.3.6.1.4.1.1916.1.25.2.3TableextremeWirelessPortCfgTablenot-accessiblecurrentThis table contains one entry per wireless port that the user has configured. The AP does not have to be plugged in for the user to configure it via this table.
1.3.6.1.4.1.1916.1.25.2.3.1RowextremeWirelessPortCfgEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.25.2.3.1.1ColumnextremeWirelessPortIfIndexread-onlycurrentThis is the MIB-II ifIndex of the port this entry describes.
1.3.6.1.4.1.1916.1.25.2.3.1.2ColumnextremeWirelessPortCfgIpAddressread-writecurrentThis value is assigned to the port for external management.
1.3.6.1.4.1.1916.1.25.2.3.1.3ColumnextremeWirelessPortCfgLocationread-writecurrentThis describes the physical location of the wireless port.
1.3.6.1.4.1.1916.1.25.2.3.1.4ColumnextremeWirelessPortCfgDetectedTimeoutread-writecurrentThis is the number of seconds a station can stay in the detected station table without authenticating.
1.3.6.1.4.1.1916.1.25.2.3.1.5ColumnextremeWirelessPortCfgClientWatchdogread-writecurrentSetting this value to true will force the AP to run a watch-dog process for system health.
1.3.6.1.4.1.1916.1.25.2.3.1.6ColumnextremeWirelessPortLastChangeread-onlycurrentThe value of sysUpTime when the port entered its last state
1.3.6.1.4.1.1916.1.25.2.3.1.7ColumnextremeWirelessPortStateread-onlycurrentThe current state of the wireless part of this port. enabled : Port is actively looking for wireless interfaces. disabled : Port is administratively unable to …
1.3.6.1.4.1.1916.1.25.2.3.1.8ColumnextremeWirelessPortAntennaTyperead-writecurrentThis is the type of the Antenna for Detachable product. For Altitude-2d series, further selection is available through this variable.
1.3.6.1.4.1.1916.1.25.2.3.1.9ColumnextremeWirelessPortAntennaLocationread-writecurrentThis specifies the location the detachable antenna.
1.3.6.1.4.1.1916.1.25.2.3.1.10ColumnextremeWirelessPortBootstrapServerAddressTyperead-writecurrentThe type of address specified in the object 'extremeWirelessPortBootstrapServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.2.3.1.11ColumnextremeWirelessPortBootstrapServerAddressread-writecurrentThis specifies the TFTP server address from where the AP gets the Bootstrap Image. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.25.2.3.1.12ColumnextremeWirelessPortBootstrapFilePathread-writecurrentThis specifies the TFTP FileName of the AP Bootstrap Image.
1.3.6.1.4.1.1916.1.25.2.3.1.13ColumnextremeWirelessPortBootLoaderServerAddressTyperead-writecurrentThe type of address specified in the object 'extremeWirelessPortBootLoaderServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.2.3.1.14ColumnextremeWirelessPortBootLoaderServerAddressread-writecurrentThis specifies the TFTP server address from where the AP gets the Bootloader Image. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.25.2.3.1.15ColumnextremeWirelessPortBootLoaderFilePathread-writecurrentThis specifies the TFTP FileName of the AP Bootloader Image.
1.3.6.1.4.1.1916.1.25.2.3.1.16ColumnextremeWirelessPortRuntimeServerAddressTyperead-writecurrentThe type of address specified in the object 'extremeWirelessPortRuntimeServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.2.3.1.17ColumnextremeWirelessPortRuntimeServerAddressread-writecurrentThis specifies the TFTP server address from where the AP gets the Runtime Image. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.25.2.3.1.18ColumnextremeWirelessPortRuntimeFilePathread-writecurrentThis specifies the TFTP FileName of the AP Runtime Image.
1.3.6.1.4.1.1916.1.25.2.3.1.19ColumnextremeWirelessPortMultiBootModeread-writecurrentThis is used to identify the image with which the AP boots up. This is enumerated as follows: 0 - a300 - This specifies that AP will bootup with Extreme's A300…
1.3.6.1.4.1.1916.1.26IdentityextremeServicesExtreme Upper layer services objects
1.3.6.1.4.1.1916.1.26.1NodeextremeSyslog
1.3.6.1.4.1.1916.1.26.1.1TableextremeRemoteSyslogServerTablenot-accessiblecurrentThis table is used to configure remote syslog servers and contains information on the same.
1.3.6.1.4.1.1916.1.26.1.1.1RowextremeRemoteSyslogServerEntrynot-accessiblecurrentAn entry in the extremeRemoteSyslogServerTable.
1.3.6.1.4.1.1916.1.26.1.1.1.1ColumnextremeRemoteSyslogServerAddressTyperead-onlycurrentThe type of address specified in the object 'extremeRemoteSyslogServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.26.1.1.1.2ColumnextremeRemoteSyslogServerAddressread-onlycurrentThe address of the remote syslog server. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.26.1.1.1.3ColumnextremeRemoteSyslogServerPortread-onlycurrentThe UDP port number of the remote syslog server to which syslog messages will be sent.
1.3.6.1.4.1.1916.1.26.1.1.1.4ColumnextremeRemoteSyslogServerFacilityread-onlycurrentThe facility which will be sent in all syslog messages to this remote syslog server.
1.3.6.1.4.1.1916.1.26.1.1.1.5ColumnextremeRemoteSyslogServerSeverityread-createcurrentThe syslog message severity. All syslog messages of the specified severity for which the Bits are set, will be sent to this syslog server. When setting this ob…
1.3.6.1.4.1.1916.1.26.1.1.1.6ColumnextremeRemoteSyslogServerStatusread-createcurrentThe status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the va…
1.3.6.1.4.1.1916.1.26.1.2ScalarextremeEnableRemoteSyslogread-writecurrentThe enable/disable status of remote syslog messages.
1.3.6.1.4.1.1916.1.26.3NodeextremeDNS
1.3.6.1.4.1.1916.1.26.3.1TableextremeDNSServerTablenot-accessiblecurrentThis table is used to configure DNS servers. There can be at most two rows in this table.
1.3.6.1.4.1.1916.1.26.3.1.1RowextremeDNSServerEntrynot-accessiblecurrentAn entry in the extremeDNSServerTable.
1.3.6.1.4.1.1916.1.26.3.1.1.1ColumnextremeDNSServerAddressIndexnot-accessiblecurrentThis is an integer index. Only 1 and 2 are supported for this
1.3.6.1.4.1.1916.1.26.3.1.1.2ColumnextremeDNSServerAddressTyperead-onlycurrentThe address type of the DNS server. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.26.3.1.1.3ColumnextremeDNSServerAddressread-onlycurrentThe address of the DNS server. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.26.4NodeextremeAuthServer
1.3.6.1.4.1.1916.1.26.4.1TableextremeAuthServerEnableTablenot-accessiblecurrentThis table is used to enable/disable Auth servers
1.3.6.1.4.1.1916.1.26.4.1.1RowextremeAuthServerEnableEntrynot-accessiblecurrentAn entry in the extremeAuthServerEnableTable.
1.3.6.1.4.1.1916.1.26.4.1.1.1ColumnextremeAuthServerEnableServerTypenot-accessiblecurrentSpecifies whether this is a radius/radius-acct/tacacs/tacacs-acct server
1.3.6.1.4.1.1916.1.26.4.1.1.2ColumnextremeAuthServerEnableAccessTypenot-accessiblecurrentSpecifies whether this server is for management access or netlogin access.
1.3.6.1.4.1.1916.1.26.4.1.1.3ColumnextremeAuthServerEnableread-writecurrentEnable/Disable the Radius/tacas Server
1.3.6.1.4.1.1916.1.26.4.2TableextremeAuthServerTablenot-accessiblecurrentThis table is used to configure radius/tacacs servers.
1.3.6.1.4.1.1916.1.26.4.2.1RowextremeAuthServerEntrynot-accessiblecurrentAn entry in the extremeAuthServerTable.
1.3.6.1.4.1.1916.1.26.4.2.1.1ColumnextremeAuthServerIndexnot-accessiblecurrentInteger index of the server.
1.3.6.1.4.1.1916.1.26.4.2.1.2ColumnextremeAuthServerAddressTyperead-writecurrentType IP address of the radius/tacas server.
1.3.6.1.4.1.1916.1.26.4.2.1.3ColumnextremeAuthServerAddressread-writecurrentIP address of the radius/tacas server.
1.3.6.1.4.1.1916.1.26.4.2.1.4ColumnextremeAuthServerClientAddressTyperead-writecurrentType of IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one…
1.3.6.1.4.1.1916.1.26.4.2.1.5ColumnextremeAuthServerClientAddressread-writecurrentIP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its …
1.3.6.1.4.1.1916.1.26.4.2.1.6ColumnextremeAuthServerPortread-writecurrentPort number of the radius/tacas server.
1.3.6.1.4.1.1916.1.26.4.2.1.7ColumnextremeAuthServerSecretread-writecurrentThis is the shared secret between the Authenticator and radius/tacas server. This is logically write-only.
1.3.6.1.4.1.1916.1.26.4.2.1.8ColumnextremeAuthServerReTransmitread-writecurrentThis is the timeout in seconds after which the Authenticator will re transmit requests to the radius/tacas server.
1.3.6.1.4.1.1916.1.26.4.2.1.9ColumnextremeAuthServerTyperead-writecurrentSpecifies whether this is a radius/radius-acct/tacacs/tacacs-acct server
1.3.6.1.4.1.1916.1.26.4.2.1.10ColumnextremeAuthServerIsPrimaryread-writecurrentSpecifies whether this is the primary or the secondary server. Is TRUE if the server is primary.
1.3.6.1.4.1.1916.1.26.4.2.1.11ColumnextremeAuthServerAccessTyperead-writecurrentSpecifies whether this server is for management access or netlogin access
1.3.6.1.4.1.1916.1.26.4.2.1.12ColumnextremeAuthServerStatusread-createcurrentThe status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the va…
1.3.6.1.4.1.1916.1.27IdentityextremePoEExtreme Power over Ethernet MIB objects
1.3.6.1.4.1.1916.1.27.1NodeextremePethMain
1.3.6.1.4.1.1916.1.27.1.2TableextremePethPseSlotTablenot-accessiblecurrentA table of objects that provides power management capabilities per slot.
1.3.6.1.4.1.1916.1.27.1.2.1RowextremePethPseSlotEntrynot-accessiblecurrentA set of objects that display and control the power characteristics of a slot.
1.3.6.1.4.1.1916.1.27.1.2.1.1ColumnextremePethSlotNumbernot-accessiblecurrentSlot number. This is the same as the Group Index
1.3.6.1.4.1.1916.1.27.1.2.1.2ColumnextremePethSlotPowerLimitread-writecurrentThe configured maximum amount of inline power available to slot. The operational power available to the slot is based upon other operational and configuration …
1.3.6.1.4.1.1916.1.27.1.2.1.3ColumnextremePethSlotConsumptionPowerread-onlycurrentThe amount of power allocated to PoE devices on the slot expressed in mWatts. The amount of power allocated to a PoE device is based upon the PoE device class …
1.3.6.1.4.1.1916.1.27.1.2.1.4ColumnextremePethSlotClearConnectHistoryread-writecurrentClears the port connection history of the specified slot. Reading the value always reurns clear(2).
1.3.6.1.4.1.1916.1.27.1.2.1.5ColumnextremePethSlotReservedConsumptionPowerread-onlycurrentThe amount of reserved power consumed on the slot expressed in Milliwatts.
1.3.6.1.4.1.1916.1.27.1.2.1.6ColumnextremePethSlotCommonConsumptionPowerread-onlycurrentThe amount of common power allocated on the slot expressed in Milliwatts. This value is computed by the formula: extremePethSlotConsumptionPower - extremePethS…
1.3.6.1.4.1.1916.1.27.1.2.1.7ColumnextremePethSlotAdminEnableread-writecurrentControls whether inline power is provided by the slot.
1.3.6.1.4.1.1916.1.27.1.2.1.8ColumnextremePethSlotPoeStatusread-onlycurrentDescribes the status of the PoE system on the slot. initializing - PoE controller is under initialization, operational - PoE controller is operational and is r…
1.3.6.1.4.1.1916.1.27.1.2.1.9ColumnextremePethSlotPoeResetSystemread-writecurrentResets the PoE system on the slot. Reading returns clear(2)
1.3.6.1.4.1.1916.1.27.1.2.1.10ColumnextremePethSlotMaxAvailPowerread-onlycurrentThe maximum power available to the slot expressed in Watts. The value depends on various configuration parameters and power-supply modes and status.
1.3.6.1.4.1.1916.1.27.1.2.1.11ColumnextremePethSlotMaxCapacityread-onlycurrentThe maximum capacity of the slot expressed in Watts. This provides the hardware limitation of the slot. Actual amount of power is dependant on system status. T…
1.3.6.1.4.1.1916.1.27.1.2.1.12ColumnextremePethSlotBackupPSUread-writecurrentControls the backup power supply for inline power for the slot. A system which does not allow the backup PSU to be configured will return an error upon setting.
1.3.6.1.4.1.1916.1.27.1.2.1.13ColumnextremePethSlotPSUActiveread-onlycurrentInline Power supply status indication for the slot. Indicates which PSU is currently active. In the case of a failover a none indication can occur until one of…
1.3.6.1.4.1.1916.1.27.1.2.1.14ColumnextremePethSlotMeasuredPowerread-onlycurrentThe measured amount of power for all PoE device on the slot.
1.3.6.1.4.1.1916.1.27.1.2.1.15ColumnextremePethSlotMainPseIndexread-onlycurrentThe index into the PethMainPseTable. Provides the mapping of the slot identifier to pethMainPseGroupIndex.
1.3.6.1.4.1.1916.1.27.2NodeextremePethPort
1.3.6.1.4.1.1916.1.27.2.1TableextremePethPsePortTablenot-accessiblecurrentA table of objects that extends the standard pethPsePortTable.
1.3.6.1.4.1.1916.1.27.2.1.1RowextremePethPsePortEntrynot-accessiblecurrentA set of objects that display and control the power characteristics of a powerEthernet PSE port. This table extends the standard pethPsePortTable.
1.3.6.1.4.1.1916.1.27.2.1.1.1ColumnextremePethPortOperatorLimitread-writecurrentControls individual port maximum power level.
1.3.6.1.4.1.1916.1.27.2.1.1.2ColumnextremePethPortReservedBudgetread-writecurrentControls individual port maximum power level. Value is 0 or in the range of 3000..20000
1.3.6.1.4.1.1916.1.27.2.1.1.3ColumnextremePethPortViolationPrecedenceread-writecurrentSets the violation precedence for the specified ports. A value of advertised-class will remove/deny power in the case an 802.3af compliant PD consumes power be…
1.3.6.1.4.1.1916.1.27.2.1.1.4ColumnextremePethPortClearFaultread-writecurrentClears the fault condition. Reading always returns clear(2).
1.3.6.1.4.1.1916.1.27.2.1.1.5ColumnextremePethPortResetPowerread-writecurrentResets the power on the port. Reading always returns clear(2)
1.3.6.1.4.1.1916.1.27.2.1.1.6ColumnextremePethPortMeasuredPowerread-onlycurrentThe amount of power consumed on the port expressed in Milliwatts.
1.3.6.1.4.1.1916.1.27.4NodeextremePethSystem
1.3.6.1.4.1.1916.1.27.4.1ScalarextremePethSystemAdminEnableread-writecurrentControls whether inline power is provided by the system.
1.3.6.1.4.1.1916.1.27.4.2ScalarextremePethSystemDisconnectPrecedenceread-writecurrentControls the disconnect function of power management. When the power drain exceeds the available power budget, due to a rise in power consumption after power i…
1.3.6.1.4.1.1916.1.27.4.3ScalarextremePethSystemUsageThresholdread-writecurrentThe usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded.
1.3.6.1.4.1.1916.1.27.4.4ScalarextremePethSystemPowerSupplyModeread-writecurrentControls whether the power supply operate in redundant or load-sharing mode. Systems which do not provide redundant or load-sharing operations will return an e…
1.3.6.1.4.1.1916.1.27.4.5ScalarextremePethSystemLegacyEnableread-writecurrentControls whether legacy is supported by the system. This is only supported on S300-24 stackables currently.
1.3.6.1.4.1.1916.1.28IdentityextremeDosMibExtreme Dos protect objects information
1.3.6.1.4.1.1916.1.28.1NodeextremeDosProtect
1.3.6.1.4.1.1916.1.28.1.1ScalarextremeDosEnableread-writecurrentThe Flag indicates whether DOS protection is enabled or disabled.
1.3.6.1.4.1.1916.1.28.1.2ScalarextremeDosNoticeLevelread-writecurrentThe number of packets per second to be received for logging.
1.3.6.1.4.1.1916.1.28.1.3ScalarextremeDosAlertLevelread-writecurrentThe number of packets per second to be received for ACL creation.
1.3.6.1.4.1.1916.1.28.1.4ScalarextremeDosFilterTyperead-writecurrentThe type of access list filter to be set when threshold pakets are received
1.3.6.1.4.1.1916.1.28.1.5ScalarextremeDosAclTimeoutread-writecurrentThe timeout interval period over which DOS protect is exercised.
1.3.6.1.4.1.1916.1.28.1.6ScalarextremeDosAclRulePrecedenceread-writecurrentThe DOS filter Rule Precedence.
1.3.6.1.4.1.1916.1.28.1.7ScalarextremeDosMessagesEnableread-writecurrentThe Flag indicates whether DOS messages are enabled or disabled.
1.3.6.1.4.1.1916.1.28.1.8TableextremeDosPortTablenot-accessiblecurrentThis table contains the port wise listing of DOS attributes.
1.3.6.1.4.1.1916.1.28.1.8.1RowextremeDosPortEntrynot-accessiblecurrentInformation about the Dos attributes of a particular port.
1.3.6.1.4.1.1916.1.28.1.8.1.1ColumnextremeDosIfIndexread-onlycurrentThe index for this entry.
1.3.6.1.4.1.1916.1.28.1.8.1.2ColumnextremeDosPortTrustedread-createcurrentIndicates whether the port is trusted or untrusted.
1.3.6.1.4.1.1916.1.28.1.8.1.3ColumnextremeDosIsDosActiveread-onlycurrentIndicates whether DOS is active on this port.
1.3.6.1.4.1.1916.1.29IdentityextremeEnhDosMibExtreme Enhanced Dos protect objects information
1.3.6.1.4.1.1916.1.29.1NodeextremeEnhDosProtect
1.3.6.1.4.1.1916.1.29.1.1ScalarextremeEnhDosEnableRateLimitread-writecurrentThe Flag indicates whether Enhanced DOS protection with rate limit is enabled or disabled.
1.3.6.1.4.1.1916.1.29.1.2ScalarextremeEnhDosEnableIpFdbread-writecurrentThe Flag indicates whether Enhanced DOS protection against IPFDB thrashing is enabled or disabled.
1.3.6.1.4.1.1916.1.29.1.3ScalarextremeEnhDosEnableBenchMarkread-writecurrentThe Flag indicates whether Enhanced DOS protection with benchmarking is enabled or disabled.
1.3.6.1.4.1.1916.1.29.1.4ScalarextremeEnhDosCacheSizeread-writecurrentThe Enhanced DOS Cache Size. The number of DA/SA pairs
1.3.6.1.4.1.1916.1.29.1.5TableextremeEnhDosPortTablenot-accessiblecurrentThis table contains the port wise listing of Enhanced DOS attributes.
1.3.6.1.4.1.1916.1.29.1.5.1RowextremeEnhDosPortEntrynot-accessiblecurrentInformation about the Dos attributes of a particular port.
1.3.6.1.4.1.1916.1.29.1.5.1.1ColumnextremeEnhDosPortIfIndexread-onlycurrentThe index for this entry.
1.3.6.1.4.1.1916.1.29.1.5.1.2ColumnextremeEnhDosPortTrustedread-createcurrentIndicates whether the port is trusted or untrusted.
1.3.6.1.4.1.1916.1.29.1.5.1.3ColumnextremeEnhDosPortAlarmStateread-onlycurrentIndicates whether the port is in alarm state or not.
1.3.6.1.4.1.1916.1.29.1.5.1.4ColumnextremeEnhDosPortLearnLimitread-createcurrentThe number of packets allowed on the port before an entry is created in the forwarding table.
1.3.6.1.4.1.1916.1.29.1.5.1.5ColumnextremeEnhDosPortLearnWindowread-createcurrentThe duration to be considered to reach the threshold for creating an entry in the forwarding table.
1.3.6.1.4.1.1916.1.29.1.5.1.6ColumnextremeEnhDosPortAgingTimeread-createcurrentThe duration to be considered for aging out entries created on this port.
1.3.6.1.4.1.1916.1.29.1.5.1.7ColumnextremeEnhDosPortRateLimitEnableread-createcurrentIndicates whether the rate limit is enabled for this port.
1.3.6.1.4.1.1916.1.29.1.5.1.8ColumnextremeEnhDosPortIpFdbEnableread-createcurrentIndicates whether the DOS protection against IP FDB thrashing is enabled for this port.
1.3.6.1.4.1.1916.1.29.1.5.1.9ColumnextremeEnhDosPortBenchMarkEnableread-createcurrentIndicates whether the bench marking is enabled for this port.
1.3.6.1.4.1.1916.1.29.1.5.1.10ColumnextremeEnhDosPortRateLimitThresholdread-createcurrentThe number of packets allowed on the port within the learning window before the rate limit is applied.
1.3.6.1.4.1.1916.1.29.1.5.1.11ColumnextremeEnhDosPortRateLimitDropProbabilityread-createcurrentThe probability that the packet is discarded after the reaching the threshold.
1.3.6.1.4.1.1916.1.29.1.5.1.12ColumnextremeEnhDosPortRateLimitLearningWindowread-createcurrentThe duration to be considered after which the rate limit is applied.
1.3.6.1.4.1.1916.1.29.1.5.1.13ColumnextremeEnhDosPortRateLimitProtocolread-createcurrentThe protocol packets to be considered for rate limit filtering.
1.3.6.1.4.1.1916.1.29.1.6TableextremeEnhDosPortStatisticsTablenot-accessiblecurrentThis table contains the port wise listing of DOS statistics.
1.3.6.1.4.1.1916.1.29.1.6.1RowextremeEnhDosPortStatisticsEntrynot-accessiblecurrentInformation about the DOS statistics of a particular port.
1.3.6.1.4.1.1916.1.29.1.6.1.1ColumnextremeEnhDosPortStatisticsIfIndexread-onlycurrentThe index for this entry.
1.3.6.1.4.1.1916.1.29.1.6.1.2ColumnextremeEnhDosPortStatisticsRateLimitFilteredPacketsread-onlycurrentThe number of packets filetered on this port.
1.3.6.1.4.1.1916.1.31IdentityextremeEntityExtreme FRU Odometer objects
1.3.6.1.4.1.1916.1.31.1TableextremeEntityFRUTablenot-accessiblecurrentA table containing information about each FRU in the chassis based on Entity MIB
1.3.6.1.4.1.1916.1.31.1.1RowextremeEntityFRUEntrynot-accessiblecurrentEntry in the table for a FRU Entity
1.3.6.1.4.1.1916.1.31.1.1.1ColumnextremeEntityFRUStartTimeread-onlycurrentFirst Recorded Start Date/Time. The units are represented as the standard time_t value of the start Date/Time
1.3.6.1.4.1.1916.1.31.1.1.2ColumnextremeEntityFRUOdometerread-onlycurrentNumber of time units in service.
1.3.6.1.4.1.1916.1.31.1.1.3ColumnextremeEntityFRUOdometerUnitread-onlycurrentTime unit used to represent value reported by extremeEntityFRUOdometer. Depending on the underlying hardware capability, the agent implementation can choose th…
1.3.6.1.4.1.1916.1.33IdentityextremeStackableExtreme Stackable MIB objects
1.3.6.1.4.1.1916.1.33.1ScalarextremeStackDetectionread-writecurrentThis field provides the information as to whether the stacking is enabled (True) or disabled (False) for the system. The stacking feature is supported from ext…
1.3.6.1.4.1.1916.1.33.2TableextremeStackMemberTablenot-accessiblecurrentA table containing information about each stack member that are a part of this stacking. If extremeStackDetection is not enabled, we wouldnt not have any rows …
1.3.6.1.4.1.1916.1.33.2.1RowextremeStackMemberEntrynot-accessiblecurrentEntry in the table for a StackMember Entity
1.3.6.1.4.1.1916.1.33.2.1.1ColumnextremeStackMemberSlotIdread-onlycurrentThe slot id of the stack member in the stack
1.3.6.1.4.1.1916.1.33.2.1.2ColumnextremeStackMemberTyperead-onlycurrentThe type of device of the stack member. This field reflects the individual sysOid of the member
1.3.6.1.4.1.1916.1.33.2.1.3ColumnextremeStackMemberOperStatusread-onlycurrentThe operational status of the stack member. When the stack comes up, if there is a vector mismatch namely license mismatch or platform mismatch between the mas…
1.3.6.1.4.1.1916.1.33.2.1.4ColumnextremeStackMemberRoleread-onlycurrentThe role of the stack member as to whether it is acting as a master or a slave
1.3.6.1.4.1.1916.1.33.2.1.5ColumnextremeStackMemberEntPhysicalIndexread-onlycurrentThe entPhysicalIndex of the corresponding device as defined in the ENTITY-MIB
1.3.6.1.4.1.1916.1.33.2.1.6ColumnextremeStackMemberMACAddressread-onlycurrentThe Mac address of the stack member
1.3.6.1.4.1.1916.1.33.2.1.7ColumnextremeStackMemberCurImageVersionread-onlycurrentThe current image version of the stack member
1.3.6.1.4.1.1916.1.33.2.1.8ColumnextremeStackMemberPriImageVersionread-onlycurrentThe primary image version of the stack member
1.3.6.1.4.1.1916.1.33.2.1.9ColumnextremeStackMemberSecImageVersionread-onlycurrentThe secondary image version of the stack member
1.3.6.1.4.1.1916.1.33.2.1.10ColumnextremeStackMemberBootRomVersionread-onlycurrentThe boot rom version of the stack member
1.3.6.1.4.1.1916.1.33.2.1.11ColumnextremeStackMemberCurConfigread-onlycurrentThe current configuration of the stack member
1.3.6.1.4.1.1916.1.33.2.1.12ColumnextremeStackMemberConfigSelectedread-onlycurrentThe config selected to be used on reboot for the stack member
1.3.6.1.4.1.1916.1.33.2.1.13ColumnextremeStackMemberImageSelectedread-onlycurrentThe image selected to be used on reboot for the stack member
1.3.6.1.4.1.1916.1.33.2.1.14ColumnextremeStackMemberStackPriorityread-onlycurrentThe stack priority of the stack member. The stack priority is used for the master election algorithm. The member with the highest priority comes up as the mast…
1.3.6.1.4.1.1916.1.33.2.1.15ColumnextremeStackMemberMgmtIpAddressread-onlycurrentThe fallback mgmt ip address which was configured through CLI for this stack member. This ipaddress can be used to communicate with this member, if it comes up…
1.3.6.1.4.1.1916.1.33.2.1.16ColumnextremeStackMemberSysLocationread-writecurrentThe physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
1.3.6.1.4.1.1916.1.33.2.1.17ColumnextremeStackMemberAutoConfigread-onlycurrentThis field provides the information whether the config of the stack member is autogenerated(true) or not(false)
1.3.6.1.4.1.1916.1.33.2.1.18ColumnextremeStackMemberStackStatusread-writecurrentThis status is used for disabling the stacking feature for the stack member. If stacking is enabled for the stack member we get the information as enable, if w…
1.3.6.1.4.1.1916.1.33.3TableextremeStackingPortTablenot-accessiblecurrentA table containing information about each stacking port in the stack. If extremeStackDetection is not enabled, we would not have any rows for this table
1.3.6.1.4.1.1916.1.33.3.1RowextremeStackingPortEntrynot-accessiblecurrentEntry in the table for each stacking port in the stack
1.3.6.1.4.1.1916.1.33.3.1.1ColumnextremeStackingPortIfIndexread-onlycurrentA unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re…
1.3.6.1.4.1.1916.1.33.3.1.2ColumnextremeStackingPortRemoteMacread-onlycurrentThe Mac address of the remote system, this stacking port is connected to. The value of the mac address will be 00:00:00:00:00:00 if the stacking link is not ac…
1.3.6.1.4.1.1916.1.33.3.1.3ColumnextremeStackingPortLinkSpeedread-onlycurrentThe Speed of the stacking port link in bps. The speed will be zero if the link is not up
1.3.6.1.4.1.1916.1.33.3.1.4ColumnextremeStackingPortLinkStatusread-onlycurrentThe Link status of the stacking port link
1.3.6.1.4.1.1916.1.33.4NodeextremeStackableTraps
1.3.6.1.4.1.1916.1.33.4.0NodeextremeStackTrapsPrefix
1.3.6.1.4.1.1916.1.33.4.0.1NotificationextremeStackMemberOverheatcurrentThe extremeStackMemberOverheat notification is generated when the temperature of the stack member reaches the threshold temperature
1.3.6.1.4.1.1916.1.33.4.0.2NotificationextremeStackMemberStatusChangedcurrentThe extremeStackMemberStatusChanged notification is generated when the operational status of the stack member changes
1.3.6.1.4.1.1916.1.33.4.0.3NotificationextremeStackingPortStatusChangedcurrentThe extremeStackingPortStatusChanged notification is generated when the operational status of the stacking port changes
1.3.6.1.4.1.1916.2NodeextremeProduct
1.3.6.1.4.1.1916.2.1Nodesummit1
1.3.6.1.4.1.1916.2.2Nodesummit2
1.3.6.1.4.1.1916.2.3Nodesummit3
1.3.6.1.4.1.1916.2.4Nodesummit4
1.3.6.1.4.1.1916.2.5Nodesummit4fx
1.3.6.1.4.1.1916.2.6Nodesummit48
1.3.6.1.4.1.1916.2.7Nodesummit24
1.3.6.1.4.1.1916.2.8NodeblackDiamond6800
1.3.6.1.4.1.1916.2.11NodeblackDiamond6808
1.3.6.1.4.1.1916.2.12Nodesummit7iSX
1.3.6.1.4.1.1916.2.13Nodesummit7iTX
1.3.6.1.4.1.1916.2.14Nodesummit1iTX
1.3.6.1.4.1.1916.2.15Nodesummit5i
1.3.6.1.4.1.1916.2.16Nodesummit48i
1.3.6.1.4.1.1916.2.17Nodealpine3808
1.3.6.1.4.1.1916.2.19Nodesummit1iSX
1.3.6.1.4.1.1916.2.20Nodealpine3804
1.3.6.1.4.1.1916.2.21Nodesummit5iLX
1.3.6.1.4.1.1916.2.22Nodesummit5iTX
1.3.6.1.4.1.1916.2.23NodeenetSwitch24Port
1.3.6.1.4.1.1916.2.24NodeblackDiamond6816
1.3.6.1.4.1.1916.2.25Nodesummit24e3
1.3.6.1.4.1.1916.2.26Nodealpine3802
1.3.6.1.4.1.1916.2.27NodeblackDiamond6804
1.3.6.1.4.1.1916.2.28Nodesummit48si
1.3.6.1.4.1.1916.2.30NodesummitPx1
1.3.6.1.4.1.1916.2.40Nodesummit24e2TX
1.3.6.1.4.1.1916.2.41Nodesummit24e2SX
1.3.6.1.4.1.1916.2.53Nodesummit200-24
1.3.6.1.4.1.1916.2.54Nodesummit200-48
1.3.6.1.4.1.1916.2.55Nodesummit300-48
1.3.6.1.4.1.1916.2.58Nodesummit400-48t
1.3.6.1.4.1.1916.2.59Nodesummit400-24x
1.3.6.1.4.1.1916.2.61Nodesummit300-24
1.3.6.1.4.1.1916.2.63Nodesummit400-24t
1.3.6.1.4.1.1916.2.64Nodesummit400-24p
1.3.6.1.4.1.1916.2.67NodeextremeStack
1.3.6.1.4.1.1916.2.70Nodesummit200-24fx
1.3.6.1.4.1.1916.3NodeextremeMisc
1.3.6.1.4.1.1916.3.1NodeextremeOids
1.3.6.1.4.1.1916.3.1.1NodeextremeMauType
1.3.6.1.4.1.1916.3.1.1.1NodeextremeMauType1000BaseSX
1.3.6.1.4.1.1916.3.1.1.2NodeextremeMauType1000BaseLX
1.3.6.1.4.1.1916.3.1.1.3NodeextremeMauType1000BaseCX
1.3.6.1.4.1.1916.3.1.1.4NodeextremeMauType1000BaseSXFD
1.3.6.1.4.1.1916.3.1.1.5NodeextremeMauType1000BaseLXFD
1.3.6.1.4.1.1916.3.1.1.6NodeextremeMauType1000BaseCXFD
1.3.6.1.4.1.1916.3.1.1.7NodeextremeMauType1000BaseWDMHD
1.3.6.1.4.1.1916.3.1.1.8NodeextremeMauType1000BaseWDMFD
1.3.6.1.4.1.1916.3.1.1.9NodeextremeMauType1000BaseLX70HD
1.3.6.1.4.1.1916.3.1.1.10NodeextremeMauType1000BaseLX70FD
1.3.6.1.4.1.1916.3.1.1.11NodeextremeMauType1000BaseZXHD
1.3.6.1.4.1.1916.3.1.1.12NodeextremeMauType1000BaseZXFD
1.3.6.1.4.1.1916.3.1.1.13NodeextremeMauType1000BaseLX100HD
1.3.6.1.4.1.1916.3.1.1.14NodeextremeMauType1000BaseLX100FD
1.3.6.1.4.1.1916.4NodeextremeV2Traps
1.3.6.1.4.1.1916.4.1NodeextremeCoreSCTraps
1.3.6.1.4.1.1916.4.1.0NodeextremeCoreSCTrapPrefix
1.3.6.1.4.1.1916.4.1.0.1NotificationextremeHealthCheckFailedcurrentCpu HealthCheck has failed.
1.3.6.1.4.1.1916.4.1.0.2NotificationextremeCpuUtilizationRisingTrapcurrentCPU Utilizations Rising trap generated when extremeCpuUtilRisingThreshold is touched/crossed
1.3.6.1.4.1.1916.4.1.0.3NotificationextremeCpuUtilizationFallingTrapcurrentCPU Utilization Falling Trap is generated when the extremeCpuAggregateUtilization falls below 80% of the extremeCpuUtilRisingThreshold
1.3.6.1.4.1.1916.4.1.0.4NotificationextremeProcessorStateChangeTrapcurrentFailed processor on module has been detected.
1.3.6.1.4.1.1916.4.1.0.5NotificationextremeMsmFailoverTrapcurrentMSM failover occurred.
1.3.6.1.4.1.1916.4.1.0.6NotificationextremeEsrpTimedOutFailedOverMastercurrentThe master node performed a hitless MSM failover, but the master failed to resume normal operation within the reelect timeout. Thus, a new master (this switch)…
1.3.6.1.4.1.1916.4.1.0.7NotificationextremeRateLimitExceededTrapcurrentCommitted Information Rate exceeded.
1.3.6.1.4.1.1916.4.1.0.7.1ScalarextremeRateLimitExceededTrapTypeaccessible-for-notifycurrentThe trap condition being reported.
1.3.6.1.4.1.1916.4.1.0.7.2ScalarextremeRateLimitExceededTrapIndicatoraccessible-for-notifycurrentThe trap condition being reported.
1.3.6.1.4.1.1916.4.1.0.7.4ScalarextremeExceededByteCountaccessible-for-notifycurrentThe number of bytes that exceeded the rate.
1.3.6.1.4.1.1916.4.2NodeextremeBgpTraps
1.3.6.1.4.1.1916.4.2.0NodeextremeBgpTrapsPrefix
1.3.6.1.4.1.1916.4.2.0.1NotificationextremeBgpPrefixReachedThresholdcurrentThe extremeBgpPrefixReachedThreshold notification is generated when the number of prefixes received over this peer session reaches the threshold limit.
1.3.6.1.4.1.1916.4.2.0.2NotificationextremeBgpPrefixMaxExceededcurrentThe extremeBgpPrefixMaxExceeded notification is generated when the number of prefixes received over this peer session reaches the maximum configured limit.
1.3.6.1.4.1.1916.4.3NodeextremeSecurityTraps
1.3.6.1.4.1.1916.4.3.0NodeextremeSecurityTrapsPrefix
1.3.6.1.4.1.1916.4.3.0.1NotificationextremeMacLimitExceededcurrentThis trap will be generated, for a port on which limit-learning has been configured, when a new MAC address exceeding the limit is learnt on that port.
1.3.6.1.4.1.1916.4.3.0.2NotificationextremeUnauthorizedPortForMacDetectedcurrentThis trap will be generated when a MAC Address is learnt on a port on which it is not not authorized. This will happen when the MAC address is statically confi…
1.3.6.1.4.1.1916.4.3.0.3NotificationextremeMacDetectedOnLockedPortcurrentThis trap will be generated on a port for which lock-learning has been configured, when a new MAC address is learnt on that port.
1.3.6.1.4.1.1916.4.3.0.4NotificationextremeNetloginUserLogincurrentThis trap will be generated when a netlogin supplicant passes authentication and logs in successfully into the network.
1.3.6.1.4.1.1916.4.3.0.5NotificationextremeNetloginUserLogoutcurrentThis trap will be generated when a netlogin supplicant logs out. This trap is meant to notify logout event only for already authenticated and logged in supplic…
1.3.6.1.4.1.1916.4.3.0.6NotificationextremeNetloginAuthFailurecurrentThis trap will be generated upon authentication failure for a netlogin supplicant
1.3.6.1.4.1.1916.4.3.1ScalarextremeMacSecurityVlanIfIndexaccessible-for-notifycurrentThe ifIndex of the VLAN on which the MAC address was received.
1.3.6.1.4.1.1916.4.3.2ScalarextremeMacSecurityVlanDescraccessible-for-notifycurrentThe description(name) of the VLAN on which the MAC address was received.
1.3.6.1.4.1.1916.4.3.3ScalarextremeMacSecurityMacAddressaccessible-for-notifycurrentThe received MAC address.
1.3.6.1.4.1.1916.4.3.4ScalarextremeMacSecurityPortIfIndexaccessible-for-notifycurrentThe ifIndex of the port on which the MAC address was received.
1.3.6.1.4.1.1916.4.3.5ScalarextremeMacSecurityVlanIdaccessible-for-notifycurrentThe VLAN ID of the VLAN on which the MAC address was received.
1.3.6.1.4.1.1916.4.3.6ScalarextremeNetloginStationMacaccessible-for-notifycurrentMAC address of netlogin supplicant
1.3.6.1.4.1.1916.4.3.7ScalarextremeNetloginStationAddraccessible-for-notifycurrentMAC address of netlogin supplicant
1.3.6.1.4.1.1916.4.3.8ScalarextremeNetloginPortIfIndexaccessible-for-notifycurrentIfIndex of authenticator port to which the netlogin supplicant is connected
1.3.6.1.4.1.1916.4.3.9ScalarextremeNetloginAuthTypeaccessible-for-notifycurrentIF supplicant is authenticated using remote authentication server as RADIUS or locally using authenticator local user database
1.3.6.1.4.1.1916.4.3.10ScalarextremeNetloginSystemTimeaccessible-for-notifycurrentThe time when a netlogin event occurs and is meaningful for accounting purposes.
1.3.6.1.4.1.1916.4.3.11ScalarextremeNetloginUseraccessible-for-notifycurrentInformation containing type of session as NETLOGIN or DOT1X concatenated with userName i,e '[NETLOGIN | DOT1X]:<username>'
1.3.6.1.4.1.1916.4.3.12ScalarextremeNetloginSrcVlanaccessible-for-notifycurrentUpon successful login this vlan will represent the one in which user resides before authentication while upon logout this vlan will be the one in which user re…
1.3.6.1.4.1.1916.4.3.13ScalarextremeNetloginDestVlanaccessible-for-notifycurrentThe description (name) of the VLAN in which user moves after successful login or logout.
1.3.6.1.4.1.1916.4.3.14ScalarextremeNetloginSessionStatusaccessible-for-notifycurrent-success (1) Successful login -sessionReset (2) Administrator has initialized Authentication State. -fDBAgingInitiatedLogout (3) Logout initiated due to FDB ag…
1.3.6.1.4.1.1916.4.4NodeextremeNMSTraps
1.3.6.1.4.1.1916.4.4.0NodeextremeNMSTrapsPrefix
1.3.6.1.4.1.1916.4.4.0.1NotificationextremeNMSInventoryChangedcurrentThis trap is sent by Extreme's Network Management Applications when a change in its inventory database occurs. This trap is not send by a router or switch.
1.3.6.1.4.1.1916.4.4.0.2NotificationextremeNMSTopologyChangedcurrentThis trap is sent by Extreme's Network Management Applications when a change in its Topology database occurs. This trap is not send by a router or switch.
1.3.6.1.4.1.1916.4.4.1ScalarextremeNMSDeviceAddressaccessible-for-notifycurrentThe IP address of the device modified by Extreme's Network Management Application.
1.3.6.1.4.1.1916.4.5NodeextremeAPTraps
1.3.6.1.4.1.1916.4.5.0NodeextremeAPTrapsPrefix
1.3.6.1.4.1.1916.4.5.0.1NotificationextremeWirelessPortStateChangecurrentThis trap is generated when a wireless port moves into enabled, disabled or online.
1.3.6.1.4.1.1916.4.5.0.2NotificationextremeWirelessPortBootFailurecurrentThis trap is sent by the platform if a wireless port fails to boot too many times.
1.3.6.1.4.1.1916.4.5.0.3NotificationextremeWirelessClientStationAgedOutcurrentThis trap is generated when a client is aged out of the table.
1.3.6.1.4.1.1916.4.5.0.4NotificationextremeWirelessNetloginClientAssociatedcurrentThis trap is generated when a client has associated to an interface that is web based network login enabled.
1.3.6.1.4.1.1916.4.5.0.5NotificationextremeWirelessAPAddedcurrentThis is generated when a new AP is added to the scan results table. It will ony be generated if the value of extremeWirelessScanSendAPAddedTrap is true.
1.3.6.1.4.1.1916.4.5.0.6NotificationextremeWirelessAPRemovedcurrentThis is generated when an AP is removed from the scan results table. It will ony be generated if the value of extremeWirelessScanSendAPRemovedTrap is true.
1.3.6.1.4.1.1916.4.5.0.7NotificationextremeWirelessAPUpdatedcurrentThis is generated when the IEs recorded for an AP in the scan results table change. It will only be generated if the value of SendAPUpdatedTrap is true.
1.3.6.1.4.1.1916.4.5.0.8NotificationextremeWirelessProbeInfoAddedcurrentThis is generated when a new station is added to the probe info table. It will only be generated if the value of extremeWirelessProbeInfoSendAddedTrap is true.
1.3.6.1.4.1.1916.4.5.0.9NotificationextremeWirelessProbeInfoRemovedcurrentThis is generated when a station is removed from the probe info table. It will only be generated if the value of extremeWirelessProbeInfoSendRemovedTrap is tru…
1.3.6.1.4.1.1916.4.5.0.10NotificationextremeWirelessOffChannelScanStartedcurrentThis is generated when an off-channel scan starts running.
1.3.6.1.4.1.1916.4.5.0.11NotificationextremeWirelessOffChannelScanFinishedcurrentThis is generated when an off-channel scan finishes running.
1.3.6.1.4.1.1916.4.5.0.12NotificationextremeWirelessCounterMeasureStartedcurrentThis trap is generated when counter measures are started on a wireless interface.
1.3.6.1.4.1.1916.4.5.0.13NotificationextremeWirelessCounterMeasureStoppedcurrentThis trap is generated when counter measures are stopped on a wireless interface.
1.3.6.1.4.1.1916.4.5.0.14NotificationextremeWirelessInterfaceChannelRescancurrentThis trap is generated when a wireless interface tries to autoselect a channel. It indicates whether a particular channel scan was successful, or if it failed …
1.3.6.1.4.1.1916.4.6NodeextremeElrpTraps
1.3.6.1.4.1.1916.4.6.0NodeextremeElrpTrapsPrefix
1.3.6.1.4.1.1916.4.6.0.1NotificationextremeElrpVlanLoopDetectedcurrentThe extremeElrpVlanLoopDetected notification is generated when the ELRP client detects a loop in the vlan.
1.3.6.1.4.1.1916.4.7NodeextremeEapsTraps
1.3.6.1.4.1.1916.4.7.0NodeextremeEapsTrapsPrefix
1.3.6.1.4.1.1916.4.7.0.1NotificationextremeEapsStateChangecurrentThe extremeEapsStateChange notification is generated when the EAPS domain has a state change.
1.3.6.1.4.1.1916.4.7.0.2NotificationextremeEapsFailTimerExpFlagSetcurrentThe extremeEapsFailTimerExpFlagSet notification is generated when the EAPS domain's fail timer expires for the first time, while its state is not in Fail state.
1.3.6.1.4.1.1916.4.7.0.3NotificationextremeEapsFailTimerExpFlagClearcurrentThe extremeEapsFailTimerExpFlagClear notification is generated when the EAPS domain's Fail timer expired flag is cleared.
1.3.6.1.4.1.1916.4.7.0.4NotificationextremeEapsLinkDownRingCompletecurrentIf a Transit is in Link-Down state, and it receives a Health-Check-Pdu from the Master indicating the ring is Complete, it means there is some problem with the…
1.3.6.1.4.1.1916.4.9NodeextremeEapsSharedLinkTraps
1.3.6.1.4.1.1916.4.9.0NodeextremeEapsSharedLinkTrapsPrefix
1.3.6.1.4.1.1916.4.9.0.1NotificationextremeEapsSegmentTimerExpFlagSetcurrentThe extremeEapsFailTimerExpFlagSet notification is generated when the EAPS domain's segment timer expires for the first time.
1.3.6.1.4.1.1916.4.9.0.2NotificationextremeEapsSegmentTimerExpFlagClearcurrentThe extremeEapsSegmentTimerExpFlagClear notification is generated when the EAPS domain's Segment Fail timer expired flag is cleared.
1.3.6.1.4.1.1916.4.9.1ScalarextremeSegmentPortaccessible-for-notifycurrentThe EAPS Shared Link's Segment Id.
1.3.6.1.4.1.1916.4.9.2ScalarextremeSharedPortaccessible-for-notifycurrentThe EAPS Shared Link's Shared port.
1.3.6.1.4.1.1916.4.11NodeextremeEnhDosTraps
1.3.6.1.4.1.1916.4.11.0NodeextremeEnhDosTrapsPrefix
1.3.6.1.4.1.1916.4.11.0.1NotificationextremeEnhDosThresholdReachedcurrentThe extremeDosThresholdReached notification is generated when the DOS threshold is crossed for any of the ports.
1.3.6.1.4.1.1916.4.11.0.2NotificationextremeEnhDosThresholdClearedcurrentThe extremeEnhDosThresholdCleared notification is generated when the DOS threshold is cleared for any of the ports.
1.3.6.1.4.1.1916.4.12NodeextremePethTraps
1.3.6.1.4.1.1916.4.12.0NodeextremePethNotificationPrefix
1.3.6.1.4.1.1916.4.12.0.1NotificationextremePethPSUStatusNotificationcurrentThis Notification indicates a change in the PoE PSU for the slot.
1.3.6.1.4.1.1916.4.13NodeextremeCableTraps
1.3.6.1.4.1.1916.4.13.0NodeextremeCableTrapsPrefix
1.3.6.1.4.1.1916.4.13.0.1NotificationextremeTrapDiagPortDiagnosticscurrentIndicates the status of Diagnostics for a port. The status indicates whether Diagnostics for a particular port failed
1.3.6.1.4.1.1916.4.14NodeextremeDosTraps
1.3.6.1.4.1.1916.4.14.0NodeextremeDosTrapsPrefix
1.3.6.1.4.1.1916.4.14.0.1NotificationextremeDosThresholdClearedcurrentThe extremeDosThresholdCleared notification is generated when the DOS threshold is cleared .
1.3.6.1.4.1.1916.4.14.0.2NotificationextremeDosThresholdReachedcurrentThe extremeDosThresholdReached notification is generated when the DOS threshold is crossed for any of the ports.
Type Definitions
NameSyntaxStatusDescription
AuthServerAccessTypeINTEGER { mgmt-access(1), netlogin(2) }currentSpecifies whether the server is for authenticating mangement or netlogin accesses
AuthServerTypeINTEGER { radius(1), radius-acct(2), tacacs(3), tacacs-acct(4) }currentThe type of authentication/accounting server.
ClientAuthTypeINTEGER { none(0), open(1), wep(2), mac-based(3), dot1x(4), wpa-psk(5), web-based (6), wpa(7), wpa2(8), wpa2-psk(9)}currentType of client specified in the netlogin traps as well as the client table. For wired clients, only none, netlogin and dot1x are valid
Dot11AChannelBITS { channel36(0), channel40(1), channel44(2), channel52(3), channel56(4), channel60(5), channel64(6), channel100(7), channel104(8), channel108(9), channel112(10), channel116(11), channel120(12), channel124(13), channel128(14), channel132(15), channel140(16) }currentSpecifies the channel number for 802.11A interface.
Dot11AuthModeINTEGER { open(0), shared(1)}currentSpecifies the allowed authentication type.
Dot11SpeedBITS { speed1(0), speed2(1), speed5(2), speed11(3), speed6(4), speed9(5), speed12(6), speed18(7), speed24(8), speed36(9), speed48(10), speed54(11)}currentSpecifies the speed in Mbps to use for the interface. A value of 0 indicates auto.
Dot11TypeINTEGER { a(1), b(2), g(3), bg(4) }currentThe current standard supports A, B, G interfaces.
ExtremeDeviceIdOCTET STRING (SIZE (8))currentThe switch identifier used by Extreme EDP protocol.
ExtremeGenAddrOCTET STRING (SIZE (0..20))currentThe value of an address.
ExtremeWirelessAntennaLocationINTEGER { indoor(0), outdoor(1) }currentSpecifies whether the antenna is an indoor or outdoor antenna
ExtremeWirelessAntennaTypeINTEGER { integrated(0), detachable15901(1), detachable15902(2) }currentSpecifies Antenna type attached to the access-point. The integrated antenna is specified by CTL table on PCI eeprom. The detachable model 15901 is an omni-directional antenna. The detachable model 15902 is a directional…
ExtremeWirelessChannelAutoSelectStatusBITS { notApplicable(0), inProgress(1), success(2), radarInterferenceDuringScan(3), radarInterferenceDuringOperation(4), restartedDueToInterference(5)}currentSpecifies the status of the channel auto-selection process.
ExtremeWirelessCountryCodeINTEGER { unitedStates(840), japan(392), taiwan(158), newZealand(554), albania ( 8), algeria ( 12), argentina ( 32), armenia ( 51), australia ( 36), austria ( 40), azerbaijan ( 31), bahrain ( 48), belarus ( 112), belgium ( 56), belize ( 84), bolivia ( 68), brazil ( 76), bruneiDarussalam ( 96), bulgaria ( 100), canada ( 124), chile ( 152), china ( 156), colombia ( 170), costaRica ( 188), croatia ( 191), cyprus ( 196), czech ( 203), denmark ( 208), dominicanRepublic ( 214), ecuador ( 218), egypt ( 818), elSalvador ( 222), estonia ( 233), faeroeIslands ( 234), finland ( 246), france ( 250), georgia ( 268), germany ( 276), greece ( 300), guatemala ( 320), honduras ( 340), hongKong ( 344), hungary ( 348), iceland ( 352), india ( 356), indonesia ( 360), iran ( 364), iraq ( 368), ireland ( 372), israel ( 376), italy ( 380), jamaica ( 388), japan1 ( 393), japan2 ( 394), japan3 ( 395), jordan ( 400), kazakhstan ( 398), kenya ( 404), koreaNorth ( 408), koreaRoc ( 410), koreaRoc2 ( 411), kuwait ( 414), latvia ( 428), lebanon ( 422), libya ( 434), liechtenstein ( 438), lithuania ( 440), luxembourg ( 442), macau ( 446), macedonia ( 807), malaysia ( 458), mexico ( 484), monaco ( 492), morocco ( 504), netherlands ( 528), nicaragua ( 558), norway ( 578), oman ( 512), pakistan ( 586), panama ( 591), paraguay ( 600), peru ( 604), philippines ( 608), poland ( 616), portugal ( 620), puertoRico ( 630), qatar ( 634), romania ( 642), russia ( 643), saudiArabia ( 682), singapore ( 702), slovakia ( 703), slovenia ( 705), southAfrica ( 710), spain ( 724), sweden ( 752), switzerland ( 756), syria ( 760), thailand ( 764), trinidadTYobago ( 780), tunisia ( 788), turkey ( 792), uae ( 784), ukraine ( 804), unitedKingdom ( 826), uruguay ( 858), uzbekistan ( 860), venezuela ( 862), vietNam ( 704), yemen ( 887), zimbabwe ( 716), restOfTheWorld ( 0), extremeDefault ( 998), unknown ( 999) }currentSpecifies the country code the AP operates in.
ExtremeWirelessPhysInterfaceIndexInteger32(1..2147483647)currentThe value of a physical interface number. Each radio on an AP corresponds to a physical interface. There can be multiple virtual interface on each physical interface. The format for the physical interface is xxxxyy wher…
ExtremeWirelessVirtInterfaceIndexInteger32(1..2147483647)currentThe value of a virtual interface number. Each radio on an AP corresponds to a physical interface. There can be multiple virtual interface on each physical interface. The format for the virtual interface is xxxxyyzz wher…
L4PortINTEGER (0|1..65535)currentThe value of a transport layer (layer-4) port number, in network byte order. A value of 0 indicates all allowed values of this field i.e. wildcard.
NetworkAuthModeINTEGER { none(0), webNetlogin(1), macRadius(2), wpaPlusLegacy(3), wpaOnly(4), wpa2PlusWPA(5), wpa2Only(6)}currentSpecifies the allowed authentication type.
PortListOCTET STRINGcurrentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
WirelessRemoteConnectBindingTypeINTEGER { none(0), mac-address(1), serial-number(2), ip-address(3)}currentThe type of binding to be used when mapping APs to virtual ports
WPACipherSetBITS { none(0), wep64(1), tkip(2), wrap(3), ccmp(4), wep128(5), other(6) }currentA set of supported ciphers which can be advertised by WPA stations. Each set bit indicates support for a given cipher suite. The special value none is allowed for representing the absence of information. The value other…
WPAKeyMgmtSetBITS { none(0), dot1x(1), psk(2) }currentA set of supported key management suites. For more info see IEEE 802.11i D3.0 section 7.
MIB Viewer