EdgeSwitch-DOT1X-ADVANCED-FEATURES-MIB
60 objects
The Ubiquiti Private MIB for FastPath Dot1x Advanced Features
Imported Objects
| EdgeSwitch-REF-MIB | fastPath |
| IEEE8021-PAE-MIB | dot1xPaePortNumber |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.1.1.36 | IdentityfastPathdot1xAdvanced | The Ubiquiti Private MIB for FastPath Dot1x Advanced Features | ||
| 1.3.6.1.4.1.4413.1.1.36.1 | NodeagentDot1xEnhancementConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.36.1.1 | ScalaragentDot1xRadiusVlanAssignment | read-write | current | Enable/Disable dot1x Vlan Assignment Support on the switch. |
| 1.3.6.1.4.1.4413.1.1.36.1.2 | ScalaragentDot1xDynamicVlanCreationMode | read-write | current | Enable/Disable dot1x dynamic vlan creation Support on the switch. |
| 1.3.6.1.4.1.4413.1.1.36.1.3 | ScalaragentDot1xEapolFloodMode | read-write | current | Enable/Disable dot1x eapol flooding mode on the switch. |
| 1.3.6.1.4.1.4413.1.1.36.2 | NodeagentDot1xPortConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.36.2.1 | TableagentDot1xPortConfigTable | not-accessible | current | A table for dot1x enhanced Port details and associated functionality. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1 | RowagentDot1xPortConfigEntry | not-accessible | current | Represents entry for port config table. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.1 | ColumnagentDot1xPortControlMode | read-write | current | Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the … |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.2 | ColumnagentDot1xGuestVlanId | read-write | current | Specifies the Guest Vlan of the port. A port will be moved to its Guest Vlan if no client sucessfully authenticates on that port for the Guest Vlan Period. A v… |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.3 | ColumnagentDot1xGuestVlanPeriod | read-write | current | The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the port . |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.4 | ColumnagentDot1xUnauthenticatedVlan | read-write | current | Specifies the Unauthenticated Vlan of the port. A port will be moved to its unauthenticated Vlan if the client authenticates unsucessfully on that port . A val… |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.5 | ColumnagentDot1xMaxUsers | read-write | current | Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.6 | ColumnagentDot1xPortVlanAssigned | read-only | current | Specifies the vlan the port is assigned to by Dot1x . Only relevant if the port control mode of the port is auto. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.7 | ColumnagentDot1xPortVlanAssignedReason | read-only | current | Reason the port is assigned to the vlan specified by agentDot1xPortVlanAssigned . Only relevant if the port control mode of the port is auto. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.8 | ColumnagentDot1xPortSessionTimeout | read-only | current | Specifies the session timeout value assigned by the Radius server for this port . Only relevant if the port control mode of the port is auto. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.9 | ColumnagentDot1xPortTerminationAction | read-only | current | Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . Only relevant if the port control… |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.10 | ColumnagentDot1xPortMABenabled | read-write | current | Specifies if Mac-based bypass authentication is configured for the port. |
| 1.3.6.1.4.1.4413.1.1.36.2.1.1.11 | ColumnagentDot1xPortMABenabledOperational | read-only | current | Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. |
| 1.3.6.1.4.1.4413.1.1.36.3 | NodeagentDot1xClientConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.36.3.1 | TableagentDot1xClientConfigTable | not-accessible | current | A table for dot1x Client details and associated functionality. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1 | RowagentDot1xClientConfigEntry | not-accessible | current | Represents entry for port config table. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.1 | ColumnagentDot1xClientMacAddress | read-only | current | Specifies the client MAC address of the client. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.2 | ColumnagentDot1xLogicalPort | read-only | current | Specifies the client MAC address of the client . |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.3 | ColumnagentDot1xInterface | read-only | current | Specifies the physical interface to which the client is attached . |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.4 | ColumnagentDot1xClientAuthPAEstate | read-only | current | The current value of the Authenticator PAE state machine for the client. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.5 | ColumnagentDot1xClientBackendState | read-only | current | The current state of the Backend Authentication state machine. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.6 | ColumnagentDot1xClientUserName | read-only | current | Specifies the username with which the client is authenticated to the Radius server . This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.7 | ColumnagentDot1xClientSessionTime | read-only | current | Specifies the time elapsed in seconds since the client was authenticated in this session. This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.8 | ColumnagentDot1xClientFilterID | read-only | current | Specifies the Filter ID or Diffserv Policy name to be applied to the session . This vlaue is populated only if it has been assigned by the RADIUS server. This … |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.9 | ColumnagentDot1xClientVlanAssigned | read-only | current | Specifies the vlan the client is associated with by Dot1x . This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.10 | ColumnagentDot1xClientVlanAssignedReason | read-only | current | Reason the client is associated to the vlan specified by agentDot1xClientVlanAssigned . This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.11 | ColumnagentDot1xClientSessionTimeout | read-only | current | Specifies the session time remaining for the client if assigned by the Radius server . A value of 0 indicates that no session timeout was assigned by the RADIU… |
| 1.3.6.1.4.1.4413.1.1.36.3.1.1.12 | ColumnagentDot1xClientTerminationAction | read-only | current | Specifies the session termination action assigned by the Radius Server . This is the action taken when the session times out . This value is only valid when th… |
| 1.3.6.1.4.1.4413.1.1.36.4 | NodeagentDot1xMonitorModeConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.36.4.1 | ScalaragentDot1xMonitorModeEnabled | read-write | current | Enable/Disable Dot1x Monitor mode Support on the switch. |
| 1.3.6.1.4.1.4413.1.1.36.4.2 | ScalaragentDot1xMonitorModeClients | read-only | current | Retrieves the number of clients that got authenticated by Monitor mode globally. |
| 1.3.6.1.4.1.4413.1.1.36.4.3 | ScalaragentDot1xNonMonitorModeClients | read-only | current | Retrieves the number of clients that are granted access by Dot1x with no monitor mode enabled. |
| 1.3.6.1.4.1.4413.1.1.36.5 | NodeagentDot1xAuthHistoryResultsGroup | |||
| 1.3.6.1.4.1.4413.1.1.36.5.1 | TableagentDot1xPortAuthHistoryResultTable | not-accessible | current | A table to display the dot1x monitor mode results. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1 | RowagentDot1xPortAuthHistoryResultEntry | not-accessible | current | Represents Dot1x Authentication results for a Dot1x Authentication History table. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.1 | ColumnagentDot1xAuthHistoryResultIfaceIndex | read-only | current | This object represents the physical Bridge Port on which dot1x Auth event might be received. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.2 | ColumnagentDot1xAuthHistoryResultIndex | read-only | current | Reference to the Dot1x Authentication history table maintained. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.3 | ColumnagentDot1xAuthHistoryResultTimeStamp | read-only | current | Specifies the exact time of Dot1x Authentication event information occurred maintained in the history table. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.4 | ColumnagentDot1xAuthHistoryResultAge | read-only | current | Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.5 | ColumnagentDot1xAuthHistoryResultMacAddress | read-only | current | Specifies the client MAC Address maintained in the Dot1x Authentication history table. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.6 | ColumnagentDot1xAuthHistoryResultVlanId | read-only | current | Specifies the VLANID maintained in the history table. It is the VLANID which is failed to associate to the port during authentication process. The VLANID is id… |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.7 | ColumnagentDot1xAuthHistoryResultAuthStatus | read-only | current | Specifies the Dot1x Authentication status (Success or Failure) for the Dot1x Authentication event takes place. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.8 | ColumnagentDot1xAuthHistoryResultAccessStatus | read-only | current | Authentication access status indicates the exact status of the dot1x client. Granted means the client is allowed access to the network using dot1x or monitor m… |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.9 | ColumnagentDot1xAuthHistoryResultFilterID | read-only | current | Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.10 | ColumnagentDot1xAuthHistoryResultVlanAssigned | read-only | current | Specifies the VLANID maintained in the history table (It is the VLANID Assigned to a Port or Client authenticate). |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.11 | ColumnagentDot1xAuthHistoryResultVlanAssignedType | read-only | current | Specifies the VLAN Assigned Reason maintained in the history table. |
| 1.3.6.1.4.1.4413.1.1.36.5.1.1.12 | ColumnagentDot1xAuthHistoryResultReasonCode | read-only | current | Specifies the Dot1x authentication reason refered by the result index on a port. |
| 1.3.6.1.4.1.4413.1.1.36.5.2 | ScalaragentDot1xAuthHistoryResultsClear | read-write | current | When set to enable(1), all Dot1x Authentication History information will be reset. |
| 1.3.6.1.4.1.4413.1.1.36.5.3 | TableagentDot1xPortAuthHistoryResultClearTable | not-accessible | current | A table to clear the dot1x monitor mode results per interface. |
| 1.3.6.1.4.1.4413.1.1.36.5.3.1 | RowagentDot1xPortAuthHistoryResultClearEntry | not-accessible | current | Represents to clear the Dot1x Authentication results for a Dot1x Authentication History table. |
| 1.3.6.1.4.1.4413.1.1.36.5.3.1.1 | ColumnagentDot1xAuthHistoryResultIfIndex | read-only | current | This object represents the physical Bridge Port on which dot1x Auth event might be received. |
| 1.3.6.1.4.1.4413.1.1.36.5.3.1.2 | ColumnagentDot1xPortAuthHistoryResultsClear | read-write | current | When set to enable(1), all Dot1x Authentication History information for the given port will be reset. The value is write-only. Attempt to read will return disa… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dot1xPortControlMode | INTEGER { forceUnauthorized(1), auto(2), forceAuthorized(3), macBased(4) } | current | The control values of the Authenticator PAE controlled Port. |
| Dot1xSessionTerminationAction | INTEGER { default(1), reauthenticate(2) } | current | The action to be taken on session termination . |