EtherWAN-ewnSwitchM
384 objects
A private enterprise MIB for EtherWAN managed switches.
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2736 | Nodeetherwan | |||
| 1.3.6.1.4.1.2736.1 | IdentitylanSwitch | to | A private enterprise MIB for EtherWAN managed switches. | |
| 1.3.6.1.4.1.2736.1.1 | NodeewnSwitchM | |||
| 1.3.6.1.4.1.2736.1.1.1 | NodeewnSystem | |||
| 1.3.6.1.4.1.2736.1.1.1.1 | ScalarewnSystemFirmwareRev | read-only | current | Firmware Revision |
| 1.3.6.1.4.1.2736.1.1.1.2 | ScalarewnSystemConfigOperation | read-write | current | System Configuration operations. This is a write-only variable. On read, it will always return none(0). On loadDefault(1) write, it will restore to default and… |
| 1.3.6.1.4.1.2736.1.1.1.3 | ScalarewnSystemReboot | read-write | current | System Warm Reboot Functionality |
| 1.3.6.1.4.1.2736.1.1.1.4 | ScalarewnSystemRebootRequired | read-only | current | System Warm Reboot Functionality |
| 1.3.6.1.4.1.2736.1.1.1.5 | NodeewnSystemTFTP | |||
| 1.3.6.1.4.1.2736.1.1.1.5.1 | ScalarewnSystemTFTPFilename | read-write | current | Filename for TFTP download |
| 1.3.6.1.4.1.2736.1.1.1.5.2 | ScalarewnSystemTFTPIpAddress | read-write | current | IPAddress of TFTP server |
| 1.3.6.1.4.1.2736.1.1.1.5.3 | ScalarewnSystemTFTPAction | read-write | current | Action of the current TFTP session |
| 1.3.6.1.4.1.2736.1.1.1.5.4 | ScalarewnSystemTFTPState | read-write | current | State of the current TFTP session |
| 1.3.6.1.4.1.2736.1.1.1.6 | ScalarewnSystemProductModel | read-only | current | Product Model Number |
| 1.3.6.1.4.1.2736.1.1.1.7 | ScalarewnSystemHardwareRev | read-only | current | Hardware Revision |
| 1.3.6.1.4.1.2736.1.1.1.8 | ScalarewnSystemGatewayIpAddress | read-write | current | Default Gateway IP Address for this device |
| 1.3.6.1.4.1.2736.1.1.1.9 | ScalarewnSystemMacAddr | read-only | current | MAC Address of the switch. |
| 1.3.6.1.4.1.2736.1.1.1.10 | ScalarewnSystemPassword | read-write | current | Password for the user root. Setting a zero-length string removes the password. Reading this object always returns a string of '******'. |
| 1.3.6.1.4.1.2736.1.1.1.11 | ScalarewnSystemPasswordEncrypted | read-write | current | Password for the user root. Setting a zero-length string removes the password. The password will be encrypted before saved to the configuration file. Reading t… |
| 1.3.6.1.4.1.2736.1.1.1.12 | ScalarewnSystemAutoSaveState | read-write | current | Auto save system configuration |
| 1.3.6.1.4.1.2736.1.1.1.13 | ScalarewnSystemAutoSaveDelay | read-write | current | Delay time in seconds for auto save system configuration |
| 1.3.6.1.4.1.2736.1.1.1.14 | ScalarewnSystemProductSeries | read-only | current | On fast Ethernet switches, this property indicates the name of the product series the switch belongs to. On the GbE switches, this property indicates the model… |
| 1.3.6.1.4.1.2736.1.1.1.15 | NodeewnSystemTraps | |||
| 1.3.6.1.4.1.2736.1.1.1.15.1 | NotificationewnTrapsLoopbackDetected | current | A ewnTrapsLoopbackDetected trap signifies that the SNMP entity, acting in an agent role, has detected that the interface is error-disabled by loopback-detect a… | |
| 1.3.6.1.4.1.2736.1.1.1.15.2 | NotificationewnTrapsMacChangedNotification | current | This notification is generated when there is at least one MAC address changed or removed. | |
| 1.3.6.1.4.1.2736.1.1.1.15.3 | NotificationewnTrapsRringTopologyChange | current | A topologyChange trap is sent by a bridge when any of rring ports transitions from the Blocking state to the Forwarding state, and from the Forwarding state to… | |
| 1.3.6.1.4.1.2736.1.1.1.15.4 | NotificationewnTrapsDigitalIOInput1 | current | This notification is also generated when there is digital input io number 1 has detected. | |
| 1.3.6.1.4.1.2736.1.1.1.15.5 | NotificationewnTrapsDigitalIOInput2 | current | This notification is also generated when there is digital input io number 2 has detected. | |
| 1.3.6.1.4.1.2736.1.1.1.15.6 | NotificationewnTrapsPowerUp | current | This notification is power Up . | |
| 1.3.6.1.4.1.2736.1.1.1.15.7 | NotificationewnTrapsPowerDown | current | This notification is power Down . | |
| 1.3.6.1.4.1.2736.1.1.1.15.8 | NotificationewnTrapsPoEIFUp | current | This notification is PoE Interface Up . | |
| 1.3.6.1.4.1.2736.1.1.1.15.9 | NotificationewnTrapsPoEIFDown | current | This notification is PoE Interface Down . | |
| 1.3.6.1.4.1.2736.1.1.1.15.10 | NotificationewnTrapsPoEOverLoad | current | This notification is PoE Over Load . | |
| 1.3.6.1.4.1.2736.1.1.1.15.11 | NotificationewnTrapsPoESystemError | current | This notification is PoE System Error . | |
| 1.3.6.1.4.1.2736.1.1.1.15.12 | NotificationewnTrapsRringCPTopologyChange | current | A topologyChange trap is sent by a bridge when any of coupling ports transitions from the Blocking state to the Forwarding state, and from the Forwarding state… | |
| 1.3.6.1.4.1.2736.1.1.1.15.13 | NotificationewnStormDetected | current | A ewnStormDetected trap signifies that the SNMP entity, acting in an agent role, has detected the interface is error-disabled by storm-detect. | |
| 1.3.6.1.4.1.2736.1.1.1.15.17 | NotificationewnTrapsUserLogin | current | This trap is sent when a user logs in. | |
| 1.3.6.1.4.1.2736.1.1.1.15.18 | NotificationewnTrapsUserLogout | current | This trap is sent when a user logs out. | |
| 1.3.6.1.4.1.2736.1.1.1.15.19 | NotificationewnTrapsUserLoginFailure | current | This trap is sent when a user login has been rejected. | |
| 1.3.6.1.4.1.2736.1.1.1.16 | ScalarewnSystemPowerState | read-only | obsolete | This object contains the information of Power change event. Each tuple consist of 2 octets in the format of <Power Id><Power State> where <Power Id> is of 1 oc… |
| 1.3.6.1.4.1.2736.1.1.1.17 | NodeewnSystemLogin | |||
| 1.3.6.1.4.1.2736.1.1.1.17.1 | ScalarewnSystemLoginUserName | accessible-for-notify | current | The name of the user who is attempting or has been authenticated. |
| 1.3.6.1.4.1.2736.1.1.1.17.2 | ScalarewnSystemLoginMethod | accessible-for-notify | current | The service or application name that the connection is established by: telnet, ssh, web. |
| 1.3.6.1.4.1.2736.1.1.1.17.3 | ScalarewnSystemLoginUserIpAddr | accessible-for-notify | current | The user's IP Address. |
| 1.3.6.1.4.1.2736.1.1.1.18 | ScalarewnSystemIntegrateProductSeries | read-only | current | The name of the product series the device belongs to. |
| 1.3.6.1.4.1.2736.1.1.2 | NodeewnPort | |||
| 1.3.6.1.4.1.2736.1.1.2.1 | ScalarewnPortCount | read-only | current | Port count |
| 1.3.6.1.4.1.2736.1.1.2.2 | TableewnPortTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2736.1.1.2.2.1 | RowewnPortEntry | not-accessible | current | Port entry |
| 1.3.6.1.4.1.2736.1.1.2.2.1.1 | ColumnewnPortNo | read-only | current | Port Number |
| 1.3.6.1.4.1.2736.1.1.2.2.1.2 | ColumnewnPortString | read-only | current | Port String |
| 1.3.6.1.4.1.2736.1.1.2.2.1.3 | ColumnewnPortHardwareType | read-only | current | Port hardware type |
| 1.3.6.1.4.1.2736.1.1.2.2.1.4 | ColumnewnPortLinkStatus | read-only | current | Port Link Status |
| 1.3.6.1.4.1.2736.1.1.2.2.1.5 | ColumnewnPortLinkConfig | read-write | current | Port Administrative Link Status identical to ifAdminStatus |
| 1.3.6.1.4.1.2736.1.1.2.2.1.6 | ColumnewnPortSpeedStatus | read-only | current | Port Speed Status |
| 1.3.6.1.4.1.2736.1.1.2.2.1.7 | ColumnewnPortSpeedConfig | read-write | current | Port Speed Configuration |
| 1.3.6.1.4.1.2736.1.1.2.2.1.8 | ColumnewnPortDupStatus | read-only | current | Port Duplexity Status |
| 1.3.6.1.4.1.2736.1.1.2.2.1.9 | ColumnewnPortDupConfig | read-write | current | Port Duplexity Configuration |
| 1.3.6.1.4.1.2736.1.1.2.2.1.10 | ColumnewnPortFlowStatus | read-only | current | Port Flow Control Status |
| 1.3.6.1.4.1.2736.1.1.2.2.1.11 | ColumnewnPortFlowConfig | read-write | current | Port Flow Control Configuration |
| 1.3.6.1.4.1.2736.1.1.2.2.1.12 | ColumnewnPortFuncType | read-write | current | The operational mode of the port |
| 1.3.6.1.4.1.2736.1.1.2.2.1.13 | ColumnewnPortBroadcastLimit | read-write | current | Switch Broadcast rate limit type. |
| 1.3.6.1.4.1.2736.1.1.2.2.1.15 | ColumnewnPortDlfMulticastLimit | read-write | current | Switch DLF and Multicast rate limit type. |
| 1.3.6.1.4.1.2736.1.1.2.2.1.16 | ColumnewnPortLimitLevel | read-write | current | Switch rate limit level. |
| 1.3.6.1.4.1.2736.1.1.2.2.1.17 | ColumnewnPortPriority | read-write | current | Default priority for untagged frames received by this port |
| 1.3.6.1.4.1.2736.1.1.2.2.1.18 | ColumnewnPortVlanMode | read-write | current | VLAN switch port mode. |
| 1.3.6.1.4.1.2736.1.1.2.2.1.19 | ColumnewnPortPVID | read-write | current | Port VLAN ID (1..4094). |
| 1.3.6.1.4.1.2736.1.1.2.2.1.20 | ColumnewnPortResetRMONCount | read-write | current | reset RMON counters on this port. |
| 1.3.6.1.4.1.2736.1.1.2.2.1.21 | ColumnewnPortDescription | read-write | current | Port name |
| 1.3.6.1.4.1.2736.1.1.2.2.1.22 | ColumnewnPortTrafficTx | read-only | current | Percentage utilization of ifOutOctets. The utilization is a floating point number with two digits after the decimal point, but represented as a string value. F… |
| 1.3.6.1.4.1.2736.1.1.2.2.1.23 | ColumnewnPortTrafficRx | read-only | current | Percentage utilization of ifInOctets. The utilization is a floating point number with two digits after the decimal point, but represented as a string value. Fo… |
| 1.3.6.1.4.1.2736.1.1.2.3 | ScalarewnPortMacChangedMsg | accessible-for-notify | current | This object contains the information of a MAC change notification event. It consists of several tuples packed together in the format of '<tuple1><tuple2>...'. … |
| 1.3.6.1.4.1.2736.1.1.2.4 | NodeewnStormDetect | |||
| 1.3.6.1.4.1.2736.1.1.2.4.1 | ScalarewnStormDetectConfig | read-write | current | Enable/disable the Storm Detect feature. A storm detect notification will always be generated when a storm event is detected and if this feature is enabled. |
| 1.3.6.1.4.1.2736.1.1.2.4.2 | ScalarewnStormDetectInterval | read-write | current | Storm Detect measurement interval in seconds, in the range of 2 to 65535 seconds, with a default of 10 seconds. |
| 1.3.6.1.4.1.2736.1.1.2.4.3 | ScalarewnStormDetErrdisRecoveryTime | read-write | current | Storm Detect error-disable recovery time interval, in the range of 2 to 65535 seconds. Default: 0 sec indicates that automatic recovery is disabled. |
| 1.3.6.1.4.1.2736.1.1.2.4.4 | ScalarewnStormDetectState | read-only | obsolete | Storm Detect state of action. |
| 1.3.6.1.4.1.2736.1.1.2.4.5 | TableewnStormDetectPerPortTable | not-accessible | current | Storm Detect Per Port Configuration |
| 1.3.6.1.4.1.2736.1.1.2.4.5.1 | RowewnStormDetectPerPortEntry | not-accessible | current | Storm Detect Per Port Table Entry |
| 1.3.6.1.4.1.2736.1.1.2.4.5.1.1 | ColumnewnStormDetectPort | read-only | current | Storm Detect Port |
| 1.3.6.1.4.1.2736.1.1.2.4.5.1.2 | ColumnewnStormDetectPortState | read-only | current | disabled(0) - indicates that storm detection is not enabled. normal(1) - indicates that storm detection is enabled, but no storm event has occurred yet. shutdo… |
| 1.3.6.1.4.1.2736.1.1.2.4.5.1.3 | ColumnewnStormDetectThresholdUtil | read-write | current | The threshold, in percentage of bandwidth utilization. When it is set to zero, the threshold is disabled. When inbound traffic of all traffic types on this int… |
| 1.3.6.1.4.1.2736.1.1.2.4.5.1.4 | ColumnewnStormDetectTrafficType | read-write | current | This object identifies a particular traffice type for use in storm detect. |
| 1.3.6.1.4.1.2736.1.1.2.4.5.1.5 | ColumnewnStormDetectThresholdPktsPerSec | read-write | current | The threshold, in packets per second. When it is set to zero, the threshold is disabled. When inbound traffic of a particular traffic type on this interface ex… |
| 1.3.6.1.4.1.2736.1.1.2.5 | TableewnPortAlarmTable | not-accessible | current | This table specifies alarm control and status information related to each port. |
| 1.3.6.1.4.1.2736.1.1.2.5.1 | RowewnPortAlarmEntry | not-accessible | current | Port Alarm Table Entry |
| 1.3.6.1.4.1.2736.1.1.2.5.1.1 | ColumnewnPortAlarmNo | read-only | current | Port Alarm Table Index |
| 1.3.6.1.4.1.2736.1.1.2.5.1.2 | ColumnewnPortAlarmPortName | read-only | current | Name of an interface. |
| 1.3.6.1.4.1.2736.1.1.2.5.1.3 | ColumnewnPortAlarmEnable | read-write | current | Individual port alarms can be enabled/disabled by this property. |
| 1.3.6.1.4.1.2736.1.1.2.5.1.4 | ColumnewnPortAlarmPortStatus | read-only | current | The current operational state of this interface. |
| 1.3.6.1.4.1.2736.1.1.2.6 | TableewnPowerAlarmStatusTable | not-accessible | deprecated | Deprecated. It is replaced by ewnPowerSupplyTable. |
| 1.3.6.1.4.1.2736.1.1.2.6.1 | RowewnPowerAlarmStatusEntry | not-accessible | deprecated | Power Alarm Table Entry |
| 1.3.6.1.4.1.2736.1.1.2.6.1.1 | ColumnewnPowerAlarmStatusNO | read-only | deprecated | Power Alarm Table Index |
| 1.3.6.1.4.1.2736.1.1.2.6.1.2 | ColumnewnPowerAlarmStatusPowerName | read-only | deprecated | Power Alarm Table Power Name |
| 1.3.6.1.4.1.2736.1.1.2.6.1.3 | ColumnewnPowerAlarmStatusTrigger | read-write | deprecated | Power Alarm Table Trigger Enable/Disable |
| 1.3.6.1.4.1.2736.1.1.2.6.1.4 | ColumnewnPowerAlarmStatusPowerStatus | read-only | deprecated | Power Alarm Table Power Status |
| 1.3.6.1.4.1.2736.1.1.3 | NodeewnMirror | |||
| 1.3.6.1.4.1.2736.1.1.3.1 | ScalarewnMirrorAvailablePortMap | read-only | current | A bitmap of ports, with each bit indicating availability of a port to be a candidate for mirrored port. For example, if fe3 is mirrored-to port, and fe9 is mir… |
| 1.3.6.1.4.1.2736.1.1.3.2 | ScalarewnMirrorCount | read-only | current | Maximum number of mirror entries supported by the device. |
| 1.3.6.1.4.1.2736.1.1.3.3 | TableewnMirrorTable | not-accessible | current | Port Mirroring table |
| 1.3.6.1.4.1.2736.1.1.3.3.1 | RowewnMirrorEntry | not-accessible | current | Mirror Entry |
| 1.3.6.1.4.1.2736.1.1.3.3.1.1 | ColumnewnMirrorIndex | read-only | current | Mirror index |
| 1.3.6.1.4.1.2736.1.1.3.3.1.2 | ColumnewnMirrorToPort | read-write | current | Mirror to port |
| 1.3.6.1.4.1.2736.1.1.3.3.1.3 | ColumnewnMirrorFromPortMap | read-write | current | Mirror from port map |
| 1.3.6.1.4.1.2736.1.1.3.3.1.4 | ColumnewnMirrorMode | read-write | current | Mirror mode |
| 1.3.6.1.4.1.2736.1.1.4 | NodeewnTrunk | |||
| 1.3.6.1.4.1.2736.1.1.4.1 | ScalarewnTrunkCount | read-only | current | Trunk count |
| 1.3.6.1.4.1.2736.1.1.4.2 | TableewnTrunkTable | not-accessible | current | Port Trunking table |
| 1.3.6.1.4.1.2736.1.1.4.2.1 | RowewnTrunkEntry | not-accessible | current | Trunk Entry |
| 1.3.6.1.4.1.2736.1.1.4.2.1.1 | ColumnewnTrunkIndex | read-only | current | Trunk index |
| 1.3.6.1.4.1.2736.1.1.4.2.1.2 | ColumnewnTrunkPortMap | read-write | current | Trunk port map |
| 1.3.6.1.4.1.2736.1.1.4.2.1.3 | ColumnewnTrunkAvailPortMap | read-only | current | Available trunk port map |
| 1.3.6.1.4.1.2736.1.1.4.2.1.4 | ColumnewnTrunkMaxNumOfPorts | read-only | current | Maximum number of ports per trunk group. |
| 1.3.6.1.4.1.2736.1.1.5 | NodeewnLACP | |||
| 1.3.6.1.4.1.2736.1.1.6 | NodeewnBridge | |||
| 1.3.6.1.4.1.2736.1.1.6.1 | ScalarewnBridgeSTPState | read-write | current | Spanning Tree Protocol functionality |
| 1.3.6.1.4.1.2736.1.1.6.2 | ScalarewnBridgeAgingTime | read-write | current | Bridge aging time |
| 1.3.6.1.4.1.2736.1.1.7 | NodeewnIGMP | |||
| 1.3.6.1.4.1.2736.1.1.7.1 | ScalarewnIGMPState | read-write | current | Internet Group Management Protocol functionality |
| 1.3.6.1.4.1.2736.1.1.7.2 | TableewnIGMPCfgTable | not-accessible | current | IGMP configuration table, an entry per VLAN |
| 1.3.6.1.4.1.2736.1.1.7.2.1 | RowewnIGMPCfgEntry | not-accessible | current | IGMP configuration entry |
| 1.3.6.1.4.1.2736.1.1.7.2.1.1 | ColumnewnIGMPCfgIndex | read-only | current | IGMP configuration entry index |
| 1.3.6.1.4.1.2736.1.1.7.2.1.2 | ColumnewnIGMPCfgVlanID | read-only | current | IGMP configuration entry's VLAN ID |
| 1.3.6.1.4.1.2736.1.1.7.2.1.3 | ColumnewnIGMPCfgIGMPVersion | read-write | current | IGMP Version |
| 1.3.6.1.4.1.2736.1.1.7.2.1.4 | ColumnewnIGMPCfgFastLeave | read-write | current | IGMP Fast-leave function |
| 1.3.6.1.4.1.2736.1.1.7.2.1.5 | ColumnewnIGMPCfgQueryInterval | read-write | current | IGMP Querrier Interval for active mode |
| 1.3.6.1.4.1.2736.1.1.7.2.1.6 | ColumnewnIGMPCfgMaxResponseTime | read-write | current | IGMP Max Response Time for active mode |
| 1.3.6.1.4.1.2736.1.1.7.2.1.7 | ColumnewnIGMPCfgReportSuppression | read-write | current | IGMP Report Suppression function |
| 1.3.6.1.4.1.2736.1.1.7.3 | TableewnIGMPRecordTable | not-accessible | current | IGMP record database table |
| 1.3.6.1.4.1.2736.1.1.7.3.1 | RowewnIGMPRecordEntry | not-accessible | current | IGMP entry |
| 1.3.6.1.4.1.2736.1.1.7.3.1.1 | ColumnewnIGMPRecordIndex | read-only | current | IGMP Group index |
| 1.3.6.1.4.1.2736.1.1.7.3.1.2 | ColumnewnIGMPRecordGroupAddress | read-only | current | IGMP group address |
| 1.3.6.1.4.1.2736.1.1.7.3.1.3 | ColumnewnIGMPRecordInterface | read-only | current | IGMP group member interface |
| 1.3.6.1.4.1.2736.1.1.7.3.1.4 | ColumnewnIGMPRecordUpTime | read-only | current | IGMP group up time |
| 1.3.6.1.4.1.2736.1.1.7.3.1.5 | ColumnewnIGMPRecordExpireTime | read-only | current | IGMP group expire time |
| 1.3.6.1.4.1.2736.1.1.7.3.1.6 | ColumnewnIGMPRecordLastReporter | read-only | current | IGMP group last reporter |
| 1.3.6.1.4.1.2736.1.1.8 | NodeewnVLAN | |||
| 1.3.6.1.4.1.2736.1.1.8.1 | ScalarewnVLANGVRPState | read-write | current | GARP VLAN Registration Protocol functionality |
| 1.3.6.1.4.1.2736.1.1.8.2 | TableewnVLANTable | not-accessible | current | VLAN Settings Table |
| 1.3.6.1.4.1.2736.1.1.8.2.1 | RowewnVLANEntry | not-accessible | current | VLAN Settings Entry |
| 1.3.6.1.4.1.2736.1.1.8.2.1.1 | ColumnewnVLANIndex | read-only | current | VLAN index |
| 1.3.6.1.4.1.2736.1.1.8.2.1.2 | ColumnewnVLANID | read-write | current | VLAN ID (valid values 1-4094) |
| 1.3.6.1.4.1.2736.1.1.8.2.1.3 | ColumnewnVLANName | read-write | current | VLAN Name. This can only be set during creation of VLAN. It cannot be modified in a later time. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.4 | ColumnewnVLANState | read-only | current | The VLAN state. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.5 | ColumnewnVLANType | read-only | current | The VLAN type. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.6 | ColumnewnVLANStaticPortMap | read-write | current | Ports that always belong to the VLAN. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.7 | ColumnewnVLANStaticUntaggedPortMap | read-write | current | Untagged ports of the VLAN. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.8 | ColumnewnVLANCurrentPortMap | read-only | current | Ports currently belonging to the VLAN. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.9 | ColumnewnVLANCurrentUntaggedPortMap | read-only | current | Untagged ports currently belonging to the VLAN. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.10 | ColumnewnVLANCurrentRegisteredPortMap | read-only | current | Registered ports currently belonging to the VLAN. |
| 1.3.6.1.4.1.2736.1.1.8.2.1.11 | ColumnewnVLANIPAddress | read-write | current | VLAN IP address / mask |
| 1.3.6.1.4.1.2736.1.1.8.3 | ScalarewnVLANAddVlan | read-write | current | Add a new VLAN to ewnVLANTable |
| 1.3.6.1.4.1.2736.1.1.8.4 | ScalarewnVLANDeleteVlan | read-write | current | Delete a VLAN from ewnVLANTable |
| 1.3.6.1.4.1.2736.1.1.9 | NodeewnQoS | |||
| 1.3.6.1.4.1.2736.1.1.9.1 | ScalarewnQoSState | read-write | current | QoS state |
| 1.3.6.1.4.1.2736.1.1.9.2 | ScalarewnQoSTrust | read-write | current | QoS trust mode |
| 1.3.6.1.4.1.2736.1.1.9.3 | ScalarewnQoSPriorityQueueOut | read-write | current | QoS priority queue out mode |
| 1.3.6.1.4.1.2736.1.1.9.4 | TableewnQoSWRRqueueTable | not-accessible | current | QoS WRR queue table |
| 1.3.6.1.4.1.2736.1.1.9.4.1 | RowewnQoSWRRqueueEntry | not-accessible | current | QoS WRR queue table entry |
| 1.3.6.1.4.1.2736.1.1.9.4.1.1 | ColumnewnQoSQueueIndex | read-only | current | QoS Queue Index |
| 1.3.6.1.4.1.2736.1.1.9.4.1.2 | ColumnewnQoSWRRqueueID | read-only | current | QoS WRR queue ID |
| 1.3.6.1.4.1.2736.1.1.9.4.1.3 | ColumnewnQoSWRRqueueCoSmap | read-write | current | QoS WRR queue CoS mapping |
| 1.3.6.1.4.1.2736.1.1.9.4.1.4 | ColumnewnQoSWRRqueueDSCPmap | read-write | current | QoS WRR queue DSCP mapping |
| 1.3.6.1.4.1.2736.1.1.9.4.1.5 | ColumnewnQoSWRRqueueBandwidth | read-write | current | QoS WRR queue bandwidth |
| 1.3.6.1.4.1.2736.1.1.10 | NodeewnSNMP | |||
| 1.3.6.1.4.1.2736.1.1.10.1 | ScalarewnSNMPState | read-write | current | SNMP state |
| 1.3.6.1.4.1.2736.1.1.10.2 | ScalarewnSNMPCommunitySet | read-write | current | Set community string currently active for this device |
| 1.3.6.1.4.1.2736.1.1.10.3 | ScalarewnSNMPCommunityGet | read-write | current | Get community string currently active for this device |
| 1.3.6.1.4.1.2736.1.1.10.4 | ScalarewnSNMPTrapCommunity1 | read-write | current | Trap community string 1 for this device |
| 1.3.6.1.4.1.2736.1.1.10.5 | ScalarewnSNMPTrapCommunity2 | read-write | current | Trap community string 2 for this device |
| 1.3.6.1.4.1.2736.1.1.10.6 | ScalarewnSNMPTrapCommunity3 | read-write | current | Trap community string 3 for this device |
| 1.3.6.1.4.1.2736.1.1.10.7 | ScalarewnSNMPTrapCommunity4 | read-write | current | Trap community string 4 for this device |
| 1.3.6.1.4.1.2736.1.1.10.8 | ScalarewnSNMPTrapCommunity5 | read-write | current | Trap community string 5 for this device |
| 1.3.6.1.4.1.2736.1.1.10.9 | ScalarewnSNMPTrapIpAddress1 | read-write | current | Trap IP Address 1 for this device |
| 1.3.6.1.4.1.2736.1.1.10.10 | ScalarewnSNMPTrapIpAddress2 | read-write | current | Trap IP Address 2 for this device |
| 1.3.6.1.4.1.2736.1.1.10.11 | ScalarewnSNMPTrapIpAddress3 | read-write | current | Trap IP Address 3 for this device |
| 1.3.6.1.4.1.2736.1.1.10.12 | ScalarewnSNMPTrapIpAddress4 | read-write | current | Trap IP Address 4 for this device |
| 1.3.6.1.4.1.2736.1.1.10.13 | ScalarewnSNMPTrapIpAddress5 | read-write | current | Trap IP Address 5 for this device |
| 1.3.6.1.4.1.2736.1.1.10.16 | ScalarewnSNMPTrapLinkDown | read-write | current | Link Down Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.17 | ScalarewnSNMPTrapLinkUp | read-write | current | Link Up Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.20 | ScalarewnSNMPResetNeed | read-only | current | Indicate need to reset SNMP process for SNMP entry changed. |
| 1.3.6.1.4.1.2736.1.1.10.21 | ScalarewnSNMPResetSNMP | read-write | current | Reset SNMP process for enable SNMP new setting. |
| 1.3.6.1.4.1.2736.1.1.10.22 | ScalarewnSNMPResetRMONCount | read-write | current | Reset RMON counters on all the ports. Please refer to ewnPortEntry group to reset specific port. |
| 1.3.6.1.4.1.2736.1.1.10.23 | ScalarewnSNMPDescription | read-write | current | Snmp Description |
| 1.3.6.1.4.1.2736.1.1.10.24 | ScalarewnSNMPMacNotificationInterval | read-write | current | Specify the notification trap interval in seconds between each set of traps that are generated. |
| 1.3.6.1.4.1.2736.1.1.10.25 | ScalarewnSNMPMacNotifyHistorySize | read-write | current | Specify the maximum number of entries in the MAC notification history table. |
| 1.3.6.1.4.1.2736.1.1.10.26 | ScalarewnSNMPMacNotifyAddedPortMap | read-write | current | MAC notification added port map. |
| 1.3.6.1.4.1.2736.1.1.10.27 | ScalarewnSNMPMacNotifyRemovedPortMap | read-write | current | MAC notification removed port map. |
| 1.3.6.1.4.1.2736.1.1.10.28 | ScalarewnSNMPTrapMacNotification | read-write | current | MAC Notification Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.29 | ScalarewnSNMPTrapPowerDown | read-write | current | Power Down Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.30 | ScalarewnSNMPTrapPowerUp | read-write | current | Power Up Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.31 | ScalarewnSNMPTrapPoEIFDown | read-write | current | PoE Interface Down Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.32 | ScalarewnSNMPTrapPoEIFUp | read-write | current | PoE Interface Trap functionality |
| 1.3.6.1.4.1.2736.1.1.10.33 | ScalarewnSNMPTrapPoEOverLoad | read-write | current | PoE Interface or System budget Trap functionality |
| 1.3.6.1.4.1.2736.1.1.11 | NodeewnSDB | |||
| 1.3.6.1.4.1.2736.1.1.11.1 | TableewnBridgeSDBTable | not-accessible | current | Switching Database table |
| 1.3.6.1.4.1.2736.1.1.11.1.1 | RowewnBridgeSDBEntry | not-accessible | current | SDB Entry |
| 1.3.6.1.4.1.2736.1.1.11.1.1.1 | ColumnewnBridgeSDBIndex | read-only | current | Switching Database Index |
| 1.3.6.1.4.1.2736.1.1.11.1.1.2 | ColumnewnBridgeSDBMacAddress | read-only | current | Switching Database MAC address |
| 1.3.6.1.4.1.2736.1.1.11.1.1.3 | ColumnewnBridgeSDBVlanId | read-only | current | Switching Database VLAN ID |
| 1.3.6.1.4.1.2736.1.1.11.1.1.4 | ColumnewnBridgeSDBPortNo | read-only | current | Switching Database port number |
| 1.3.6.1.4.1.2736.1.1.12 | NodeewnRadius | |||
| 1.3.6.1.4.1.2736.1.1.13 | NodeewnDHCP | |||
| 1.3.6.1.4.1.2736.1.1.14 | NodeewnRedundancy | |||
| 1.3.6.1.4.1.2736.1.1.14.1 | NodeewnRing | |||
| 1.3.6.1.4.1.2736.1.1.14.1.1 | ScalarewnRingCtrl | read-write | current | Enable/disable the Ring Protocol for the bridge. When 'disable(1)', the ring port will be operating in (R)STP mode if (R)STP is enabled, or placed in a forward… |
| 1.3.6.1.4.1.2736.1.1.14.1.2 | ScalarewnRingCouplingCtrl | read-write | current | Enable/disable the Ring-coupling Protocol for the bridge. When 'disable(1)', the coupling port will be operating in (R)STP mode if (R)STP is enabled, or placed… |
| 1.3.6.1.4.1.2736.1.1.14.1.3 | ScalarewnRingAvailablePortList | read-only | current | This object identifies a list of ports that are eligible to run Ring or Ring-coupling protocol. Each octet within this value specifies a set of eight ports, wi… |
| 1.3.6.1.4.1.2736.1.1.14.1.4 | ScalarewnRingPortList | read-write | current | This object identifies a list of ports that are enabled to run Ring protocol. It should be noted that only 2 ports can be set as Ring ports. Each octet within … |
| 1.3.6.1.4.1.2736.1.1.14.1.5 | ScalarewnRingCouplingPortList | read-write | current | This object identifies a list of ports that are enabled to run Ring-coupling protocol. It should be noted that only 2 ports can be set as Ring-coupling ports. … |
| 1.3.6.1.4.1.2736.1.1.14.1.6 | TableewnRingPortTable | not-accessible | current | Table of information containing the port control and state in the Ring. |
| 1.3.6.1.4.1.2736.1.1.14.1.6.1 | RowewnRingPortEntry | not-accessible | current | An entry in the table, containing the port control and state in the Ring. |
| 1.3.6.1.4.1.2736.1.1.14.1.6.1.1 | ColumnewnRingPortIndex | read-only | current | This object identifies the ring(coupling) port identifier for which this entry contains information. |
| 1.3.6.1.4.1.2736.1.1.14.1.6.1.2 | ColumnewnRingPortType | read-only | current | This object identifies the ring(coupling) port type. |
| 1.3.6.1.4.1.2736.1.1.14.1.6.1.3 | ColumnewnRingPortNumber | read-only | current | This object identifies the ring(coupling) port number. |
| 1.3.6.1.4.1.2736.1.1.14.1.6.1.4 | ColumnewnRingPortState | read-only | current | This object identifies the ring(coupling) port state. |
| 1.3.6.1.4.1.2736.1.1.14.2 | NodeewnChain | |||
| 1.3.6.1.4.1.2736.1.1.14.2.1 | ScalarewnChainVLAN | read-write | current | The chain VLAN configuration of bridge . |
| 1.3.6.1.4.1.2736.1.1.14.2.2 | ScalarewnChainPriority | read-write | current | The chain priority configuration of the device. Lower numbers indicate higher priority. |
| 1.3.6.1.4.1.2736.1.1.14.2.3 | ScalarewnChainTimeOutCount | read-write | current | The chain timeout count configuration of bridge. |
| 1.3.6.1.4.1.2736.1.1.14.2.4 | ScalarewnChainStormControl | read-write | current | Enable / disable the broadcast and multicast storm control function for chain port. |
| 1.3.6.1.4.1.2736.1.1.14.2.5 | TableewnChainPortTable | not-accessible | current | Table of information containing the port control , role and state in the Chain. |
| 1.3.6.1.4.1.2736.1.1.14.2.5.1 | RowewnChainPortEntry | not-accessible | current | An entry in the table, containing the port control , role and state in the Chain. |
| 1.3.6.1.4.1.2736.1.1.14.2.5.1.1 | ColumnewnChainPortIndex | read-only | current | This object identifies the port identifier for which this entry contains information. |
| 1.3.6.1.4.1.2736.1.1.14.2.5.1.2 | ColumnewnChainPort | read-write | current | Enable / disable the port to run chain protocol. |
| 1.3.6.1.4.1.2736.1.1.14.2.5.1.3 | ColumnewnChainPortRole | read-only | current | This object identifies the chain port role. |
| 1.3.6.1.4.1.2736.1.1.14.2.5.1.4 | ColumnewnChainPortState | read-only | current | This object identifies the chain port state. |
| 1.3.6.1.4.1.2736.1.1.14.2.6 | ScalarewnChainPassPortList | read-write | current | This object identifies the set of ports enabled to run Chain pass-through protocol. It should be noted that only 2 ports can be set as Chain pass-through ports. |
| 1.3.6.1.4.1.2736.1.1.14.2.7 | TableewnChainPassPortTable | not-accessible | current | Table of information containing the port control, role and state in the Chain pass-through. |
| 1.3.6.1.4.1.2736.1.1.14.2.7.1 | RowewnChainPassPortEntry | not-accessible | current | An entry in the table, containing the port control , role and state in the Chain pass-through. |
| 1.3.6.1.4.1.2736.1.1.14.2.7.1.1 | ColumnewnChainPassPortIndex | read-only | current | This object identifies the port identifier for which this entry contains information. |
| 1.3.6.1.4.1.2736.1.1.14.2.7.1.2 | ColumnewnChainPassPortNum | read-write | current | This object identifies the chain pass-through port number. |
| 1.3.6.1.4.1.2736.1.1.14.2.7.1.3 | ColumnewnChainPassPortRole | read-only | current | This object identifies the chain pass-through port role. |
| 1.3.6.1.4.1.2736.1.1.14.2.7.1.4 | ColumnewnChainPassPortState | read-only | current | This object identifies the chain pass-through port state. |
| 1.3.6.1.4.1.2736.1.1.15 | NodeewnSensor | |||
| 1.3.6.1.4.1.2736.1.1.15.1 | NodeewnSensorTraps | |||
| 1.3.6.1.4.1.2736.1.1.15.1.1 | NotificationewnSensorTempOverTrap | current | This trap is sent when temperature has exceeded the upper threshold. | |
| 1.3.6.1.4.1.2736.1.1.15.1.2 | NotificationewnSensorTempUnderTrap | current | This trap is sent when temperature has fallen below the lower threshold. | |
| 1.3.6.1.4.1.2736.1.1.15.1.3 | NotificationewnSensorHumidityOverTrap | current | This trap is sent when humidity has exceeded the upper threshold. | |
| 1.3.6.1.4.1.2736.1.1.15.1.4 | NotificationewnSensorHumidityUnderTrap | current | This trap is sent when humidity has fallen below the lower threshold. | |
| 1.3.6.1.4.1.2736.1.1.15.1.5 | NotificationewnSensorDigitalInputTrap | current | This trap is sent when the state at the digital pin changes from HIGH to LOW if the value of ewnSensorDigitalInputTrapEnable is lowLevel(0). This trap is sent … | |
| 1.3.6.1.4.1.2736.1.1.15.1.6 | NotificationewnSensorTempNormalTrap | current | This trap is sent when temperature has changed from alarm to normal. | |
| 1.3.6.1.4.1.2736.1.1.15.1.7 | NotificationewnSensorHumidityNormalTrap | current | This trap is sent when humidity has changed from alarm to normal. | |
| 1.3.6.1.4.1.2736.1.1.15.1.8 | NotificationewnSensorDigitalInputNormalTrap | current | This trap is sent when the state at the digital pin changes from LOW (alarm) to HIGH (normal) if the value of ewnSensorDigitalInputTrapEnable is lowLevel(0). T… | |
| 1.3.6.1.4.1.2736.1.1.15.2 | NodeewnSensorObjects | |||
| 1.3.6.1.4.1.2736.1.1.15.2.1 | ScalarewnSensorPollEnable | read-write | current | A value of true(1) indicates that sensor polling is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.2 | ScalarewnSensorPollInterval | read-write | current | Specifies how often (in seconds) the switch polls for the change that triggers an alarm. This applies to all sensors (including Digital Input). Default value i… |
| 1.3.6.1.4.1.2736.1.1.15.2.3 | ScalarewnSensorTempTrapEnable | read-write | current | When the value of this object is true(1), generation of ewnSensorTempOverTrap and ewnSensorTempUnderTrap is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.4 | ScalarewnSensorHumidityTrapEnable | read-write | current | When the value of this object is true(1), generation of ewnSensorHumidityOverTrap and ewnSensorHumidityUnderTrap is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.5 | ScalarewnSensorTempHighThreshold | read-write | current | The upper threshold for this sensor. The value would be interpreted as (degrees C * 10) or (degrees F * 10). A value of -2730 indicates no threshold is defined. |
| 1.3.6.1.4.1.2736.1.1.15.2.6 | ScalarewnSensorTempLowhreshold | read-write | current | The lower threshold for this sensor. The value would be interpreted as (degrees C * 10) or (degrees F * 10). A value of -2730 indicates no threshold is defined. |
| 1.3.6.1.4.1.2736.1.1.15.2.7 | ScalarewnSensorHumidityHighThreshold | read-write | current | The upper threshold for this sensor in percentRH. A value of 0 indicates no threhold is defined. |
| 1.3.6.1.4.1.2736.1.1.15.2.8 | ScalarewnSensorHumidityLowThreshold | read-write | current | The upper threshold for this sensor in percentRH. A value of 0 indicates no threhold is defined. |
| 1.3.6.1.4.1.2736.1.1.15.2.9 | ScalarewnSensorTemperatureMinInterval | read-write | current | Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. A value of 0 indicates no trap will be sent on t… |
| 1.3.6.1.4.1.2736.1.1.15.2.10 | ScalarewnSensorHumidityMinInterval | read-write | current | Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| 1.3.6.1.4.1.2736.1.1.15.2.11 | ScalarewnSensorTempUnit | read-write | current | This variable indicates the present temperature unit. |
| 1.3.6.1.4.1.2736.1.1.15.2.12 | ScalarewnSensorTempValue | read-only | current | The current Celsius temperature reading if a temperature sensor is present on this system. The value would be interpreted as (degrees C * 10) or (degrees F * 1… |
| 1.3.6.1.4.1.2736.1.1.15.2.13 | ScalarewnSensorHumidityValue | read-only | current | The current humidity reading if a humidity sensor is present on this system. |
| 1.3.6.1.4.1.2736.1.1.15.2.14 | ScalarewnSensorDigitalInputIndex | accessible-for-notify | current | The index of a digital input pin. |
| 1.3.6.1.4.1.2736.1.1.15.2.15 | ScalarewnSensorDigitalInputState | accessible-for-notify | current | This variable reports the most recent measurement seen by the digital input. A value of high(2) indicates HIGH. |
| 1.3.6.1.4.1.2736.1.1.15.2.16 | ScalarewnSensorDigitalInputStatus | accessible-for-notify | current | This variable indicates the present operational status of the sensor. |
| 1.3.6.1.4.1.2736.1.1.15.2.17 | ScalarewnSensorDigitalInput1Description | read-write | current | Administratively assigned human-readable name for this digital input pin. |
| 1.3.6.1.4.1.2736.1.1.15.2.18 | ScalarewnSensorDigitalInput1State | read-only | current | This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. |
| 1.3.6.1.4.1.2736.1.1.15.2.19 | ScalarewnSensorDigitalInput1Status | read-only | current | This variable indicates the present operational status of this sensor. |
| 1.3.6.1.4.1.2736.1.1.15.2.20 | ScalarewnSensorDigitalInput1TrapEnable | read-write | current | When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput1Trap is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.21 | ScalarewnSensorDigitalInput1MinInterval | read-write | current | Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| 1.3.6.1.4.1.2736.1.1.15.2.22 | ScalarewnSensorDigitalInput2Description | read-write | current | Administratively assigned human-readable name for this digital input pin. |
| 1.3.6.1.4.1.2736.1.1.15.2.23 | ScalarewnSensorDigitalInput2State | read-only | current | This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. |
| 1.3.6.1.4.1.2736.1.1.15.2.24 | ScalarewnSensorDigitalInput2Status | read-only | current | This variable indicates the present operational status of this sensor. |
| 1.3.6.1.4.1.2736.1.1.15.2.25 | ScalarewnSensorDigitalInput2TrapEnable | read-write | current | When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput2Trap is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.26 | ScalarewnSensorDigitalInput2MinInterval | read-write | current | Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| 1.3.6.1.4.1.2736.1.1.15.2.27 | ScalarewnSensorDigitalInput3Description | read-write | current | Administratively assigned human-readable name for this digital input pin. |
| 1.3.6.1.4.1.2736.1.1.15.2.28 | ScalarewnSensorDigitalInput3State | read-only | current | This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. |
| 1.3.6.1.4.1.2736.1.1.15.2.29 | ScalarewnSensorDigitalInput3Status | read-only | current | This variable indicates the present operational status of this sensor. |
| 1.3.6.1.4.1.2736.1.1.15.2.30 | ScalarewnSensorDigitalInput3TrapEnable | read-write | current | When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput3Trap is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.31 | ScalarewnSensorDigitalInput3MinInterval | read-write | current | Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| 1.3.6.1.4.1.2736.1.1.15.2.32 | ScalarewnSensorDigitalInput4Description | read-write | current | Administratively assigned human-readable name for this digital input pin. |
| 1.3.6.1.4.1.2736.1.1.15.2.33 | ScalarewnSensorDigitalInput4State | read-only | current | This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. |
| 1.3.6.1.4.1.2736.1.1.15.2.34 | ScalarewnSensorDigitalInput4Status | read-only | current | This variable indicates the present operational status of this sensor. |
| 1.3.6.1.4.1.2736.1.1.15.2.35 | ScalarewnSensorDigitalInput4TrapEnable | read-write | current | When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput3Trap is enabled. |
| 1.3.6.1.4.1.2736.1.1.15.2.36 | ScalarewnSensorDigitalInput4MinInterval | read-write | current | Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| 1.3.6.1.4.1.2736.1.1.16 | NodeewnVDSL | |||
| 1.3.6.1.4.1.2736.1.1.16.1 | ScalarewnVDSLCount | read-only | current | VDSL port count |
| 1.3.6.1.4.1.2736.1.1.16.2 | TableewnVDSLCfgTable | not-accessible | current | VDSL configuration table |
| 1.3.6.1.4.1.2736.1.1.16.2.1 | RowewnVDSLCfgEntry | not-accessible | current | VDSL configuration Entry |
| 1.3.6.1.4.1.2736.1.1.16.2.1.1 | ColumnewnVDSLCfgIndex | read-only | current | VDSL configuration entry index |
| 1.3.6.1.4.1.2736.1.1.16.2.1.2 | ColumnewnVDSLAsymMode | read-write | current | VDSL asymmetric mode |
| 1.3.6.1.4.1.2736.1.1.16.2.1.3 | ColumnewnVDSLMaxSpeed | read-write | current | VDSL maximum speed |
| 1.3.6.1.4.1.2736.1.1.16.2.1.4 | ColumnewnVDSLFixedRate | read-write | current | VDSL fixed rate bandwidth in Mbps: SYM means Symmetric mode and ASYM is used for Asymmetric mode |
| 1.3.6.1.4.1.2736.1.1.16.2.1.5 | ColumnewnVDSLRetrain | read-write | current | Upgrade VDSL speed |
| 1.3.6.1.4.1.2736.1.1.16.3 | TableewnVDSLStatTable | not-accessible | current | VDSL status table |
| 1.3.6.1.4.1.2736.1.1.16.3.1 | RowewnVDSLStatEntry | not-accessible | current | VDSL status Entry |
| 1.3.6.1.4.1.2736.1.1.16.3.1.1 | ColumnewnVDSLStatIndex | read-only | current | VDSL status entry index |
| 1.3.6.1.4.1.2736.1.1.16.3.1.2 | ColumnewnVDSLLinkSpeed | read-only | current | VDSL link speed |
| 1.3.6.1.4.1.2736.1.1.16.3.1.3 | ColumnewnVDSLOperMode | read-only | current | VDSL operation mode |
| 1.3.6.1.4.1.2736.1.1.16.3.1.4 | ColumnewnVDSLSNR1BandOnLocal | read-only | current | SNR of the 1st received band on local side |
| 1.3.6.1.4.1.2736.1.1.16.3.1.5 | ColumnewnVDSLSNR2BandOnLocal | read-only | current | SNR of the 2nd received band on local side |
| 1.3.6.1.4.1.2736.1.1.16.3.1.6 | ColumnewnVDSLSNR1BandOnRemote | read-only | current | SNR of the 1st received band on remote side |
| 1.3.6.1.4.1.2736.1.1.16.3.1.7 | ColumnewnVDSLSNR2BandOnRemote | read-only | current | SNR of the 2nd received band on remote side |
| 1.3.6.1.4.1.2736.1.1.16.4 | TableewnVDSLStatsTable | not-accessible | current | VDSL statistics table |
| 1.3.6.1.4.1.2736.1.1.16.4.1 | RowewnVDSLStatsEntry | not-accessible | current | VDSL statistics Entry |
| 1.3.6.1.4.1.2736.1.1.16.4.1.1 | ColumnewnVDSLStatsIndex | read-only | current | VDSL statistics entry index |
| 1.3.6.1.4.1.2736.1.1.16.4.1.2 | ColumnewnVDSLChannelFail | read-only | current | VDSL Channel failures counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.3 | ColumnewnVDSLFrameLoss | read-only | current | VDSL Local loss of frame counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.4 | ColumnewnVDSLErrs | read-only | current | VDSL Number of uncorrectable code words |
| 1.3.6.1.4.1.2736.1.1.16.4.1.5 | ColumnewnVDSLBroadcast | read-only | current | VDSL Broadcast frames received counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.6 | ColumnewnVDSLRxFrame | read-only | current | VDSL Received frames counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.7 | ColumnewnVDSLRxPause | read-only | current | VDSL Reception pause packets counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.8 | ColumnewnVDSLRxBytes | read-only | current | VDSL Bytes received OK counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.9 | ColumnewnVDSLTxFrame | read-only | current | VDSL Transmitted Frames Counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.10 | ColumnewnVDSLTxPause | read-only | current | VDSL Transmission pause packets counter |
| 1.3.6.1.4.1.2736.1.1.16.4.1.11 | ColumnewnVDSLTxBytes | read-only | current | VDSL Bytes transmitted OK counter |
| 1.3.6.1.4.1.2736.1.1.17 | NodeewnPoE | |||
| 1.3.6.1.4.1.2736.1.1.17.1 | ScalarewnPortPoEBudgetPower | read-write | current | System Power Budget |
| 1.3.6.1.4.1.2736.1.1.17.2 | ScalarewnPortPoEAvailablePower | read-only | current | System Power Available |
| 1.3.6.1.4.1.2736.1.1.17.3 | TableewnPortPoESettingTable | not-accessible | current | Power Over Ethernet Port Setting table |
| 1.3.6.1.4.1.2736.1.1.17.3.1 | RowewnPoEPortSettingEntry | not-accessible | current | Power Over Ethernet Port entry |
| 1.3.6.1.4.1.2736.1.1.17.3.1.1 | ColumnewnPoEPortIndex | read-only | current | Power Over Ethernet Port Number |
| 1.3.6.1.4.1.2736.1.1.17.3.1.2 | ColumnewnPoEEnableMode | read-write | current | Power Over Ethernet Port Mode Control : Disable/Enable/Scheduling |
| 1.3.6.1.4.1.2736.1.1.17.3.1.3 | ColumnewnPoEPowerLimitbyClassification | read-write | current | Power Limit by Classification : Disable/Enable No Suppert : NA |
| 1.3.6.1.4.1.2736.1.1.17.3.1.4 | ColumnewnPoEPowerLimitFixed | read-write | current | Fixed Power Limit |
| 1.3.6.1.4.1.2736.1.1.17.3.1.5 | ColumnewnPoEPowerPriority | read-write | current | Power Priority : Critical/High/Low |
| 1.3.6.1.4.1.2736.1.1.17.3.1.6 | ColumnewnPoEPowerDownAlarm | read-write | current | Power Down Alarm : Disable/Enable |
| 1.3.6.1.4.1.2736.1.1.17.3.1.7 | ColumnewnPoEPowerStatus | read-only | current | Power Status : Searching/Delivering Power/DC Disconnect/Over Power |
| 1.3.6.1.4.1.2736.1.1.17.3.1.8 | ColumnewnPoEPowerDeviceClass | read-only | current | Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN acce… |
| 1.3.6.1.4.1.2736.1.1.17.3.1.9 | ColumnewnPoEPowerCurrent | read-only | current | Power Current : Measured usage current expressed in Milliampere. |
| 1.3.6.1.4.1.2736.1.1.17.3.1.10 | ColumnewnPoEPowerConsumption | read-only | current | Power Consumption : Measured usage power expressed in Watts. |
| 1.3.6.1.4.1.2736.1.1.17.3.1.11 | ColumnewnPoEExtendMode | read-write | current | If the value of this object is enable(1), the speed of the port is forced to set at 10Mbps so the port can deliver long range data and power up to 250 meters (… |
| 1.3.6.1.4.1.2736.1.1.17.3.1.12 | ColumnewnPoEPowerDelivery | read-write | current | A value of twoPairs(0) indicates power is delivered over 2 pairs of RJ45 pins. A value of fourPairs(1) indicates power is delivered over 4 pairs of RJ45 pins. |
| 1.3.6.1.4.1.2736.1.1.17.3.1.13 | ColumnewnPoEForcePower | read-write | current | A value of enable(1) indicates no PD detection is performed. Power is automatically injected. |
| 1.3.6.1.4.1.2736.1.1.17.5 | TableewnPoEWatchdogConfigTable | not-accessible | current | A table displays and controls the PoE watchdog function of PoE-enabled ports on the switch. The switch sends periodic ping ICMP echo request packets to monitor… |
| 1.3.6.1.4.1.2736.1.1.17.5.1 | RowewnPoEWatchdogConfigEntry | not-accessible | current | Each entry in this table contains PoE watchdog configuration information for a PoE-enabled interface. |
| 1.3.6.1.4.1.2736.1.1.17.5.1.1 | ColumnewnPoEWatchdogPortIndex | not-accessible | current | The interface on which ICMP echo request packets are sent |
| 1.3.6.1.4.1.2736.1.1.17.5.1.2 | ColumnewnPoEWatchdogState | read-write | current | Disable or enable PoE watchdog function on this interface. |
| 1.3.6.1.4.1.2736.1.1.17.5.1.3 | ColumnewnPoEWatchdogTargetAddress | read-write | current | IP address of the target to ping |
| 1.3.6.1.4.1.2736.1.1.17.5.1.4 | ColumnewnPoEWatchdogPingInterval | read-write | current | Specifies how often ping test will be run. |
| 1.3.6.1.4.1.2736.1.1.17.5.1.5 | ColumnewnPoEWatchdogMaxFailures | read-write | current | Specifies the maximum number of ping failures before determining the target is unreachable. |
| 1.3.6.1.4.1.2736.1.1.17.5.1.6 | ColumnewnPoEWatchdogAction | read-write | current | Action should be done when the number of ICMP requests with no response exceeds ewnPoEWatchdogMaxFailures. |
| 1.3.6.1.4.1.2736.1.1.17.5.1.7 | ColumnewnPoEWatchdogStartupDelay | read-write | current | Specifies the initial time to delay before starting the PoE watchdog at system startup. |
| 1.3.6.1.4.1.2736.1.1.18 | NodeewnLog | |||
| 1.3.6.1.4.1.2736.1.1.18.1 | NodeewnLogObjects | |||
| 1.3.6.1.4.1.2736.1.1.18.1.1 | NodeewnLogServer | |||
| 1.3.6.1.4.1.2736.1.1.18.1.1.1 | ScalarewnLogServerState | read-write | current | Indicates whether the remote log system is enabled. |
| 1.3.6.1.4.1.2736.1.1.18.1.1.2 | TableewnLogServerTable | not-accessible | current | A table storing the settings of remote syslog servers. |
| 1.3.6.1.4.1.2736.1.1.18.1.1.2.1 | RowewnLogServerEntry | not-accessible | current | An entry describing the characteristics of a remote syslog server. |
| 1.3.6.1.4.1.2736.1.1.18.1.1.2.1.1 | ColumnewnLogServerAddress | not-accessible | current | The IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured. |
| 1.3.6.1.4.1.2736.1.1.18.1.1.2.1.2 | ColumnewnLogServerRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported. |
| 1.3.6.1.4.1.2736.1.1.18.1.3 | NodeewnLogHistory | |||
| 1.3.6.1.4.1.2736.1.1.18.1.3.3 | TableewnLogHistoryTable | not-accessible | current | A table of syslog messages generated by this device. All 'interesting' syslog messages (i.e. severity <= ewnLogHistTableMaxSeverity) are entered into this tabl… |
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1 | RowewnLogHistoryEntry | not-accessible | current | A syslog message that was previously generated by this device. Each entry is indexed by a message index. |
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.1 | ColumnewnLogHistIndex | not-accessible | current | A monotonically increasing integer for the sole purpose of indexing messages. When it reaches the maximum value the agent flushes the table and wraps the value… |
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.2 | ColumnewnLogHistFacility | read-only | current | Name of the facility that generated this message. For example: 'SYS'. |
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.3 | ColumnewnLogHistMsgSeverity | read-only | current | The severity of the message. |
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.4 | ColumnewnLogHistMsgText | read-only | current | The text of the message. If the text of the message exceeds 160 bytes, the message will be truncated to 160 bytes and a '*' character will be appended - indica… |
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.5 | ColumnewnLogHistTimestamp | read-only | current | The value of sysUpTime when this message was generated. |
| 1.3.6.1.4.1.2736.1.1.19 | NodeewnAlarm | |||
| 1.3.6.1.4.1.2736.1.1.20 | NodeewnPTP | |||
| 1.3.6.1.4.1.2736.1.1.21 | NodeewnPowerSupply | |||
| 1.3.6.1.4.1.2736.1.1.21.1 | TableewnPowerSupplyTable | not-accessible | current | A table containing information of power supply status of the device. |
| 1.3.6.1.4.1.2736.1.1.21.1.1 | RowewnPowerSupplyEntry | not-accessible | current | Entry containing status of a power supply. |
| 1.3.6.1.4.1.2736.1.1.21.1.1.1 | ColumnewnPowerSupplyIndex | read-only | current | Index to the ewnPowerSupplyTable. |
| 1.3.6.1.4.1.2736.1.1.21.1.1.2 | ColumnewnPowerSupplyName | read-only | current | Name of a power supply, e.g. Power1, Power2. |
| 1.3.6.1.4.1.2736.1.1.21.1.1.3 | ColumnewnPowerSupplyAlarmEnable | read-write | current | Individual power alarms can be enabled/disabled by this property. |
| 1.3.6.1.4.1.2736.1.1.21.1.1.4 | ColumnewnPowerSupplyStatus | read-only | current | Status of a power supply. |
| 1.3.6.1.4.1.2736.1.2 | NodeewnSwitchMMIBGroups | |||
| 1.3.6.1.4.1.2736.1.2.1 | GroupewnSystemMIBGroup | obsolete | A collection of objects for System infomation. | |
| 1.3.6.1.4.1.2736.1.2.2 | GroupewnPortMIBGroup | current | A collection of objects for port infomation. | |
| 1.3.6.1.4.1.2736.1.2.3 | GroupewnMirrorMIBGroup | current | A collection of objects for port mirror infomation. | |
| 1.3.6.1.4.1.2736.1.2.4 | GroupewnTrunkMIBGroup | current | A collection of objects for port trunking infomation. | |
| 1.3.6.1.4.1.2736.1.2.6 | GroupewnBridgeMIBGroup | current | A collection of objects for bridge infomation. | |
| 1.3.6.1.4.1.2736.1.2.7 | GroupewnIGMPMIBGroup | current | A collection of objects for port IGMP infomation. | |
| 1.3.6.1.4.1.2736.1.2.8 | GroupewnVLANMIBGroup | current | A collection of objects for VLAN infomation. | |
| 1.3.6.1.4.1.2736.1.2.9 | GroupewnQoSMIBGroup | current | A collection of objects for QoS infomation. | |
| 1.3.6.1.4.1.2736.1.2.10 | GroupewnSNMPMIBGroup | current | A collection of objects for SNMP infomation. | |
| 1.3.6.1.4.1.2736.1.2.11 | GroupewnSDBMIBGroup | current | A collection of objects for MAC entry database infomation. | |
| 1.3.6.1.4.1.2736.1.2.14 | GroupewnRedundancyMIBGroup | current | A collection of objects for switch redundancy infomation. | |
| 1.3.6.1.4.1.2736.1.2.16 | GroupewnVDSLMIBGroup | current | A collection of objects for VDSL port infomation. | |
| 1.3.6.1.4.1.2736.1.2.17 | GroupewnPoEMIBGroup | current | A collection of objects for PoE infomation. | |
| 1.3.6.1.4.1.2736.1.2.18 | GroupewnLogGroup | current | A collection of objects for Log infomation. | |
| 1.3.6.1.4.1.2736.1.2.19 | GroupewnSystemMIBGroupV6 | current | A collection of objects for System infomation. | |
| 1.3.6.1.4.1.2736.1.2.20 | GroupewnSensorMIBGroup | current | A collection of objects for sensor/digital input infomation. | |
| 1.3.6.1.4.1.2736.1.2.100 | GroupewnNotificationsGroup | current | The notifications implemented by EtherWAN. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EwnLogFacility | INTEGER { local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23) } | current | The syslog daemon facility id. |
| EwnLogSeverity | INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } | current | The severity of a syslog message. The enumeration values are equal to the values that syslog uses + 1. For example, with syslog, emergency=0. 'emergency' : system is unusable 'alert' : action must be taken immediately '… |