ExaltComProducts
192 objects
Exalt devices
Imported Objects
| ExaltComm | AcmModulationT AlarmLevelT AuxNmsMode EnableStatusT EthAuxStatusT EthMainStatusT EthPortMode exaltcommunications ExaltEnableT FileTransferStartT FileTransferTypeT Led4ColorT NtpClientEnableT Te1LboT Te1LineCodeT Te1LoopBackModeT Te1StatusT TimeZoneT VlanGroupT VlanStatusT |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25651.1 | IdentityproductsMIB | Exalt devices | ||
| 1.3.6.1.4.1.25651.1.1 | NodeproductsMIBNotifications | |||
| 1.3.6.1.4.1.25651.1.2 | NodeproductsMIBObjects | |||
| 1.3.6.1.4.1.25651.1.2.1 | IdentityradioInfo | current | Common Radio Information to all Exalt devices. | |
| 1.3.6.1.4.1.25651.1.2.1.1 | ScalarmodelName | read-only | current | A descriptive name for the Radio. See Web, Radio Information, Model Name. |
| 1.3.6.1.4.1.25651.1.2.1.2 | ScalarpartNumber | read-only | current | The Part Number of the Radio. See Web, Radio Information, Part Number. |
| 1.3.6.1.4.1.25651.1.2.1.3 | ScalarserialNumber | read-only | current | The Radio Serial Number. See Web, Radio Inforamtion, Serial Number. |
| 1.3.6.1.4.1.25651.1.2.1.4 | ScalarinterfaceType | read-only | current | The Interfaces available on this radio. Ethernet, T1/E1, etc. See Web, Radio Information, Interface Type. |
| 1.3.6.1.4.1.25651.1.2.1.5 | ScalarfirmwareVersion | read-only | current | The Radio Firmware Version. See Web, Radio Information, Firmware Version. |
| 1.3.6.1.4.1.25651.1.2.1.6 | ScalarbootVersion | read-only | current | The Radio Boot Code Version. See Web, Radio Information, Boot Version. |
| 1.3.6.1.4.1.25651.1.2.1.11 | ScalarrdkDbVer | read-only | current | The Device RDK Database Version. See Web, Radio Information, RDK Database Version. |
| 1.3.6.1.4.1.25651.1.2.1.12 | ScalartxFreqRange | read-only | current | The Radio Tx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Transmit range. TDD radios have one frequency range. … |
| 1.3.6.1.4.1.25651.1.2.1.13 | ScalarrxFreqRange | read-only | current | The Radio Rx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Receive range. TDD radios have one frequency range. S… |
| 1.3.6.1.4.1.25651.1.2.1.14 | ScalarrfFreqBand | read-only | current | The Device Frequency Band (Range). TDD radios have N/A value in this field. FDD radios have TX High or TX Low depending on used diplexer and Transmit frequency… |
| 1.3.6.1.4.1.25651.1.2.1.15 | ScalarhwId | read-only | current | The Device Hardware ID number. See Web, Radio Information, Hardware ID number |
| 1.3.6.1.4.1.25651.1.2.1.16 | ScalarmodelNumber | read-only | current | The Model Number of the Radio. See Web, Radio Information, Model Number |
| 1.3.6.1.4.1.25651.1.2.1.17 | ScalarlicenseFeatures | read-only | current | The list of the features enabled by License Key |
| 1.3.6.1.4.1.25651.1.2.2 | IdentityradioAdmin | current | Radio Administration parameters. | |
| 1.3.6.1.4.1.25651.1.2.2.1 | ScalarsysDate | read-write | current | The Radio System Date, MM/DD/YYYY. See Web, Administration, Settings, Date. To make permanent, write save to commitAdminSettings after change. After commit, SN… |
| 1.3.6.1.4.1.25651.1.2.2.2 | ScalarsysTime | read-write | current | The Radio System Time, HH:MM:SS, as 24 hours. See Web, Administration, Settings, Time. To make permanent, write save to commitAdminSettings after change. After… |
| 1.3.6.1.4.1.25651.1.2.2.3 | NoderadioName | |||
| 1.3.6.1.4.1.25651.1.2.2.3.1 | ScalarrnLocal | read-write | current | The user specifiable Radio Name for this radio. See Web, Administration, Settings, Radio Name. To make permanent, write save to commitAdminSettings after chang… |
| 1.3.6.1.4.1.25651.1.2.2.3.2 | ScalarrnRemote | read-only | current | The Radio Name of the Radio at the far end of this RF Link. Can only be set at that radio. See Web, Administration, Settings, Radio Name. |
| 1.3.6.1.4.1.25651.1.2.2.4 | ScalarlinkName | read-write | current | The user specifiable Link Name for this radio. See Web, Administration, Settings, Link Name. To make permanent, write save to commitAdminSettings after change. |
| 1.3.6.1.4.1.25651.1.2.2.5 | ScalarlinkSecKey | read-write | current | The Link Security Key must match on both ends of an RF Link for traffic to pass. See Web, Administration, Settings, Link Security Key. To make permanent, write… |
| 1.3.6.1.4.1.25651.1.2.2.6 | ScalaradminPassword | read-write | current | The password for admin login to Web/CLI. See Web, Administration, Settings, Admin Password. To make permanent, write save to commitAdminSettings after change. |
| 1.3.6.1.4.1.25651.1.2.2.7 | ScalaruserPassword | read-write | current | The password for user login to Web/CLI. See Web, Administration, Settings, User Password. To make permanent, write save to commitAdminSettings after change. |
| 1.3.6.1.4.1.25651.1.2.2.8 | NodeipAddress | |||
| 1.3.6.1.4.1.25651.1.2.2.8.1 | ScalaripLocal | read-write | current | The IP address of local radio. This IP address is used to manage radio. See Web, Administration, Settings, IP Address. To make permanent, write save to commitA… |
| 1.3.6.1.4.1.25651.1.2.2.8.2 | ScalaripRemote | read-only | current | The IP address of the remote Radio. This IP address is used to manage Remote radio. Can only be set at that radio. See Web, Administration, Settings, IP Addres… |
| 1.3.6.1.4.1.25651.1.2.2.9 | ScalarsubnetMask | read-write | current | The Subnet Mask for IP address of local radio. See Web, Administration, Settings, IP Mask. To make permanent, write save to commitAdminSettings after change. |
| 1.3.6.1.4.1.25651.1.2.2.10 | ScalaripAddressNetmask | read-write | current | The IP address and Subnet Mask of local radio. ie 10.0.0.1/24. To make permanent, write save to commitAdminSettings after change. |
| 1.3.6.1.4.1.25651.1.2.2.11 | ScalardefaultGateway | read-write | current | The Default Gateway for local radio port. See Web, Administration, Settings, Default Gateway. To make permanent, write save to commitAdminSettings after change. |
| 1.3.6.1.4.1.25651.1.2.2.12 | ScalaraesEnable | read-write | current | The AES enable(0)/disable(1). AES (Advance Encryption Standard) can be implemented to provide additional data security for the wireless link. This function req… |
| 1.3.6.1.4.1.25651.1.2.2.13 | ScalaraesKey | read-write | current | The symmetric AES key for encrypt/decrypt payload data. Different bitlength encryption license keys (for example, 128-bit and 256-bit) are available, depending… |
| 1.3.6.1.4.1.25651.1.2.2.14 | ScalarlicKey | read-write | current | The license key which defines radio features and capabilities. See Web, Administration, Settings, License Key. To make permanent, write save to commitAdminSett… |
| 1.3.6.1.4.1.25651.1.2.2.17 | NodesnmpConfig | |||
| 1.3.6.1.4.1.25651.1.2.2.17.1 | ScalartrapIpaddr1 | read-write | current | The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. |
| 1.3.6.1.4.1.25651.1.2.2.17.2 | ScalartrapIpaddrEnable1 | read-only | current | Enable/Disable trap ip address. |
| 1.3.6.1.4.1.25651.1.2.2.17.3 | ScalartrapIpaddr2 | read-write | current | The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. |
| 1.3.6.1.4.1.25651.1.2.2.17.4 | ScalartrapIpaddrEnable2 | read-write | current | Enable/Disable trap ip address. |
| 1.3.6.1.4.1.25651.1.2.2.17.5 | ScalartrapIpaddr3 | read-write | current | The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. |
| 1.3.6.1.4.1.25651.1.2.2.17.6 | ScalartrapIpaddrEnable3 | read-write | current | Enable/Disable trap ip address. |
| 1.3.6.1.4.1.25651.1.2.2.17.7 | ScalartrapIpaddr4 | read-write | current | The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. |
| 1.3.6.1.4.1.25651.1.2.2.17.8 | ScalartrapIpaddrEnable4 | read-write | current | Enable/Disable trap ip address. |
| 1.3.6.1.4.1.25651.1.2.2.17.9 | ScalartrapAuth | read-write | current | Authentication trap enable(1)/disable(0). This is an SNMP standard trap when password information for SNMP is incorrect. See Web, Administration, SNMP, Traps, … |
| 1.3.6.1.4.1.25651.1.2.2.17.10 | ScalartrapReboot | read-write | current | Reboot trap enable(0)/disable(1). This trap is sent after any radio reboot to inform the manager of the reboot status. See Web, Administration, SNMP, Traps, Ra… |
| 1.3.6.1.4.1.25651.1.2.2.17.11 | ScalartrapLocLinkStat | read-write | current | Local Link Status trap enable(0)/disable(1). This trap is sent when Link is in errored state (equivalent to the Link LED). See Web, Administration, SNMP, Traps… |
| 1.3.6.1.4.1.25651.1.2.2.17.12 | ScalartrapLocAlarmStat | read-write | current | Local Alarm Status trap enable(0)/disable(1). This trap is sent when local radio Status is in errored state (equivalent to the Status LED). See Web, Administra… |
| 1.3.6.1.4.1.25651.1.2.2.17.13 | ScalartrapRemAlarmStat | read-write | current | Remote Alarm Status trap enable(0)/disable(1). This trap is sent when remote radio Status is in errored state (equivalent to the Status LED). See Web, Administ… |
| 1.3.6.1.4.1.25651.1.2.2.17.14 | ScalartrapLocTempStat | read-write | current | Local Temperature Status trap enable(0)/disable(1). This trap is sent when the internal temperature reaches the warning point. See Web, Administration, SNMP, T… |
| 1.3.6.1.4.1.25651.1.2.2.17.15 | Scalartrapv1Enable | read-write | current | SNMPv1 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 1. See Web, Administration, SNMP, Traps, Enable SNMPv1 Traps. |
| 1.3.6.1.4.1.25651.1.2.2.17.16 | Scalartrapv2cEnable | read-write | current | SNMPv2c Traps enable(0)/disable(1). Enables traps for SNMP protocol version 2c. See Web, Administration, SNMP, Traps, Enable SNMPv2c Traps. |
| 1.3.6.1.4.1.25651.1.2.2.17.17 | Scalartrapv3Enable | read-write | current | SNMPv3 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 3. See Web, Administration, SNMP, Traps, Enable SNMPv3 Traps. |
| 1.3.6.1.4.1.25651.1.2.2.17.18 | ScalartrapLocRslStat | read-write | current | Local RSL Status trap enable(0)/disable(1). This trap is sent when the local RSL drops below the value set in the RSL Threshold Value (dBm) field. See Web, Adm… |
| 1.3.6.1.4.1.25651.1.2.2.17.19 | ScalartrapLocRslThreshold | read-write | current | Local RSL Threshold. Exalt recommends that this trap be set to a value 5dBm or 10dBm above the threshold as a warning that the system has faded and may be appr… |
| 1.3.6.1.4.1.25651.1.2.2.17.1000 | ScalarcommitSnmpSettings | read-write | current | Option strings to be written are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes. |
| 1.3.6.1.4.1.25651.1.2.2.18 | Identityntp | current | NTP and Time zone configuration. | |
| 1.3.6.1.4.1.25651.1.2.2.18.1 | ScalarntpClientEnable | read-write | current | this mib to enable/disable the NTP client in the radio. 0 - disable NTP client. 1 - enable with 1 NTP server. 2 - enable with 2 NTP servers. 3 - enable with 3 … |
| 1.3.6.1.4.1.25651.1.2.2.18.2 | ScalarntpServer1IpAddr | read-write | current | IP address for the first NTP server in xxx.xxx.xxx.xxx format |
| 1.3.6.1.4.1.25651.1.2.2.18.3 | ScalarntpServer2IpAddr | read-write | current | IP address for the second NTP server in xxx.xxx.xxx.xxx format |
| 1.3.6.1.4.1.25651.1.2.2.18.4 | ScalarntpServer3IpAddr | read-write | current | IP address for the third NTP server in xxx.xxx.xxx.xxx format |
| 1.3.6.1.4.1.25651.1.2.2.18.5 | ScalarntpServer4IpAddr | read-write | current | IP address for the forth NTP server in xxx.xxx.xxx.xxx format |
| 1.3.6.1.4.1.25651.1.2.2.18.6 | ScalarntpTimeZoneSelect | read-write | current | Time Zone selection. 0 - (GMT-11:00) Samoa 1 - (GMT-10.00) Hawaii 2 - (GMT-09:00) Alaska 3 - (GMT-08:00) Pacific Time 4 - (GMT-07:00) Arizona 5 - (GMT-07:00) M… |
| 1.3.6.1.4.1.25651.1.2.2.18.1000 | ScalarcommitNtpSettings | read-write | current | This command allows saving or clear the NTP and Tome Zone configuration. If the save includes the change of time zone, the radio will automatically reboot to t… |
| 1.3.6.1.4.1.25651.1.2.2.1000 | ScalarcommitAdminSettings | read-write | current | The Commit Administration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is s… |
| 1.3.6.1.4.1.25651.1.2.3 | IdentityradioConfig | current | The Radio Configuration Section. | |
| 1.3.6.1.4.1.25651.1.2.3.1 | IdentitysystemConfig | current | This is the device specific configuration section. | |
| 1.3.6.1.4.1.25651.1.2.3.1.1000 | ScalarcommitSystemSettings | read-write | current | The Commit System Configuration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) comman… |
| 1.3.6.1.4.1.25651.1.2.3.2 | Identityinterface | current | Radio Interfaces Configuration section. | |
| 1.3.6.1.4.1.25651.1.2.3.2.2 | Identityte1 | current | T1,E1 interfaces Configuration section. Section allows to configure T1/E1 ports on the radio if any. | |
| 1.3.6.1.4.1.25651.1.2.3.2.2.1 | Scalarte1NumChannels | read-only | current | The Number of T1 or E1 channels supported by the Radio. |
| 1.3.6.1.4.1.25651.1.2.3.2.2.2 | Scalarte1NumActiveChannels | read-only | current | The Current number of channels available, based on bandwitdh of the RF link and the license key. |
| 1.3.6.1.4.1.25651.1.2.3.2.2.3 | ScalarselectT1orE1 | read-write | current | Select operation mode of T1/E1 interfaces. Either T1(0) or E1(1). See Web, Configuration, Interface, T1/E1, Set To E1/T1 Mode button. |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4 | Tablete1Interfaces | not-accessible | current | Attributes for T1 or E1 ports. |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1 | Rowte1Interface | not-accessible | current | An entry in the T1/E1 Attribute table. |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.1 | Columnte1Status | read-write | current | The T1/E1 status: enable(1)/disable(0). Parameter allows to enable/disable each individual T1 channel. See Web, Configuration, Interface, T1/E1, Status. To mak… |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.2 | Columnt1LBO | read-write | current | The Line Build Out length range. Valid values (ft): lbo0to133(0), lbo133to266(1), lbo266to399(2), lbo399to533(3), lbo533to655(4). See Web, Configuration, Inter… |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.3 | Columnte1AIS | read-write | current | The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails… |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.4 | Columnt1LineCode | read-write | current | The T1/E1 Line Code type: b8zs(0), ami(1). See Web, Configuration, Interface, T1/E1, AIS, Line Code. To make permanent, write save to commitTe1Settings after c… |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5 | Columnte1LoopBackMode | read-write | current | The Loop Back Mode for a T1/E1 interface. Valid values: disabled(0), ExternalLocal(1), ExternalRemote(2), Internal(3). All loopback configurations control the … |
| 1.3.6.1.4.1.25651.1.2.3.2.2.1000 | ScalarcommitTe1Settings | read-write | current | The Commit TE1 Configuration settings command. Valid values: 'save', 'clear'. Configuration changes to TE1 ports via SNMP do not take effect until 'save' (Comm… |
| 1.3.6.1.4.1.25651.1.2.3.3 | IdentityfileManagement | current | The File Management Section. This section allows to initiate Upload/Download firmware/configuration/logs, perform Firmware activation procedure. | |
| 1.3.6.1.4.1.25651.1.2.3.3.1 | ScalarcurrentFwFilename | read-only | current | The file name of the currently running firmware. See Web, Administration, File Management, File Activation, Current File. |
| 1.3.6.1.4.1.25651.1.2.3.3.2 | ScalaralternateFwFilename | read-only | current | The file name of the alternate firmware image. See Web, Administration, File Management, File Activation, Alternative File. |
| 1.3.6.1.4.1.25651.1.2.3.3.3 | ScalarswapFWimage | read-write | current | Swap the firmware images and restart radio. To perform swap operation 'swap' command needs to be sent to this parameter. For ExtendAirG2 to perform revert to f… |
| 1.3.6.1.4.1.25651.1.2.3.3.4 | IdentityfileTransfer | current | The File Transfer Section. This section allows to initiate Upload/Download firmware/configuration/logs over TFTP protocol. | |
| 1.3.6.1.4.1.25651.1.2.3.3.4.1 | ScalartftpServerIp | read-write | current | The TFTP Server IP address. |
| 1.3.6.1.4.1.25651.1.2.3.3.4.2 | ScalaruploadFilename | read-write | current | The name of the file for upload operation. For configuration file uploadFilename should be always 'config.xml'. uploadFilename value should match the file name… |
| 1.3.6.1.4.1.25651.1.2.3.3.4.3 | ScalartransferType | read-write | current | The file transfer type. Valid values: - uploadFirmware(0) - uploadConfig(1) - uploadRDD(2) (Valid only for TDD radios) - downloadFirmware(3) - downloadConfig(4… |
| 1.3.6.1.4.1.25651.1.2.3.3.4.4 | ScalartransferStart | read-write | current | TransferStart parameter is used to initiate file transfer operation. Send startTransfer(1) to this parameter. |
| 1.3.6.1.4.1.25651.1.2.3.3.4.5 | ScalartransferStatus | read-only | current | The current file transfer status. |
| 1.3.6.1.4.1.25651.1.2.3.3.5 | ScalarfactoryFwFilename | read-only | current | The file name of the factory firmware image. See Web, Administration, File Management, File Activation, Factory File. |
| 1.3.6.1.4.1.25651.1.2.4 | IdentityradioMonitor | current | Monitor Various components. | |
| 1.3.6.1.4.1.25651.1.2.4.2 | Nodealarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.3 | NodealmLocal | |||
| 1.3.6.1.4.1.25651.1.2.4.2.3.1 | NodelocSysAlarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.1 | ScalarlocLinkState | read-only | current | The Link Status Alarm. Possible values: - almNORMAL(0) - Error-free connection (BER<10e-6) - almMINOR(1) - Errorred connection (BER<10e-3) - almMAJOR(2) - No l… |
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.2 | ScalarlocTempAlarm | read-only | current | The Temperature Alarm state. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range See Web, Monitor, Alar… |
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.3 | ScalarlocCurrentTemp | read-only | current | The Internal Temperature in Celsius. |
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.4 | ScalarlocCurrentTempS | read-only | current | The Internal Temperature as a string. |
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.9 | ScalarlocLinkSecMismatch | read-only | current | This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match … |
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.15 | ScalarlocLinkStateV | read-only | current | Vertical Link Status Alarm. -<g89><> |
| 1.3.6.1.4.1.25651.1.2.4.2.3.1.16 | ScalarlocLinkStateH | read-only | current | Horizontal Link Status Alarm. -<g89><> |
| 1.3.6.1.4.1.25651.1.2.4.2.3.2 | NodelocEthAlarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.3.3 | NodelocTe1Alarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.3.3.1 | ScalarlocTe1LinkSummary | read-only | current | The T1/E1 Link Summary LED color. |
| 1.3.6.1.4.1.25651.1.2.4.2.3.3.2 | TablelocTE1Alarms | not-accessible | current | The Local T1/E1 Interface Alarms. |
| 1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1 | RowlocTe1AlarmsEntry | not-accessible | current | T1/E1 Alarms table Entry. |
| 1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1.1 | ColumnlocTe1Alarm | read-only | current | The Alarms state for the Local T1/E1 Channel. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection presen… |
| 1.3.6.1.4.1.25651.1.2.4.2.4 | NodealmRemote | |||
| 1.3.6.1.4.1.25651.1.2.4.2.4.1 | NoderemSysAlarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.1 | ScalarremLinkState | read-only | current | The Link Status Alarm for far end radio. Possible values: - almNORMAL(0) - Error-free connection (BER<10e-6) - almMINOR(1) - Errorred connection (BER<10e-3) - … |
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.2 | ScalarremTempAlarm | read-only | current | The Temperature Alarm state for far end radio. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range - al… |
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.3 | ScalarremCurrentTemp | read-only | current | The Internal Temperature in Celsius for far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.4 | ScalarremCurrentTempS | read-only | current | The internal Temperature as a string for far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.9 | ScalarremLinkSecMismatch | read-only | current | This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match … |
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.15 | ScalarremLinkStateV | read-only | current | Vertical Link Status Alarm. -<g89><> |
| 1.3.6.1.4.1.25651.1.2.4.2.4.1.16 | ScalarremLinkStateH | read-only | current | Horizontal Link Status Alarm. -<g89><> |
| 1.3.6.1.4.1.25651.1.2.4.2.4.2 | NoderemEthAlarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.4.3 | NoderemTe1Alarms | |||
| 1.3.6.1.4.1.25651.1.2.4.2.4.3.1 | ScalarremTe1LinkSummary | read-only | current | The T1/E1 Link Summary LED color. |
| 1.3.6.1.4.1.25651.1.2.4.2.4.3.2 | TableremTE1Alarms | not-accessible | current | The Remotel T1/E1 Interface Alarms. |
| 1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1 | RowremTe1AlarmsEntry | not-accessible | current | T1/E1 Alarms table Entry. |
| 1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1.1 | ColumnremTe1Alarm | read-only | current | The Alarms state for the Local T1/E1 Channel of far end radio. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no … |
| 1.3.6.1.4.1.25651.1.2.4.3 | Nodeperformance | |||
| 1.3.6.1.4.1.25651.1.2.4.3.1 | NodeperfLocal | |||
| 1.3.6.1.4.1.25651.1.2.4.3.1.1 | ScalarlocCurrentBER | read-only | current | The Curent Bit-Error Rate as scaled integer for local radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. Se… |
| 1.3.6.1.4.1.25651.1.2.4.3.1.2 | ScalarlocCurrentBERstr | read-only | current | The Current Bit-Error Rate as a string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.3 | ScalarlocCurrentRSL | read-only | current | Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect … |
| 1.3.6.1.4.1.25651.1.2.4.3.1.4 | ScalarlocCurrentRSLstr | read-only | current | The Current RSL as a string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.5 | ScalarlocErrorDuration | read-only | current | The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics cou… |
| 1.3.6.1.4.1.25651.1.2.4.3.1.6 | ScalarlocErrorDurationStr | read-only | current | The Error Duration as a formatted string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.7 | ScalarlocUnavailDuration | read-only | current | Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communi… |
| 1.3.6.1.4.1.25651.1.2.4.3.1.8 | ScalarlocUnavailDurationStr | read-only | current | The Unavailable Duration as a formatted string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.9 | ScalarlocMinRSL | read-only | current | The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL |
| 1.3.6.1.4.1.25651.1.2.4.3.1.10 | ScalarlocMinRSLstr | read-only | current | The Minimum RSL value as a string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.11 | ScalarlocMinRSLtimestamp | read-only | current | The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp |
| 1.3.6.1.4.1.25651.1.2.4.3.1.12 | ScalarlocMaxRSL | read-only | current | The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL |
| 1.3.6.1.4.1.25651.1.2.4.3.1.13 | ScalarlocMaxRSLstr | read-only | current | The Maximum RSL level As string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.14 | ScalarlocSampleDuration | read-only | current | The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset |
| 1.3.6.1.4.1.25651.1.2.4.3.1.15 | ScalarlocSampleDurationStr | read-only | current | The Sample Duration value as a formatted string. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.16 | TablelocEthPerfInterfaces | not-accessible | current | Performance characteristics of local Ethernet interfaces |
| 1.3.6.1.4.1.25651.1.2.4.3.1.16.1 | RowlocEthPerfInterfacesEntry | not-accessible | current | An entry in the Performance characteristics of local Ethernet interfaces table |
| 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.1 | ColumnlocEthUtilizationIn | read-only | current | Inbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.2 | ColumnlocEthUtilizationOut | read-only | current | Outbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.3 | ColumnlocEthSpeed | read-only | current | Current Ethernet Speed. See Web, Monitor, Ethernet Performance. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.17 | ScalarlocEthUtilizationWatermarkEnabled | read-write | current | Ethernet utilization watermark enable(1)/disable(0). See Web, Analysis, Ethernet Utilization, Ethernet Utilization Watermark. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.18 | ScalarlocEthUtilizationWatermark | read-write | current | Ethernet utilization watermark level (%). See Web, Analysis, Ethernet Utilization, Watermark level. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.19 | ScalarlocEthUtilizationWatermarkTrapEnabled | read-write | current | Ethernet utilization watermark trap enable(1)/disable(0). The watermark trap function allows administrators to receive an SNMP trap when watermark conditions a… |
| 1.3.6.1.4.1.25651.1.2.4.3.1.20 | ScalarlocEthUtilizationWatermarkTrapDuration | read-write | current | Ethernet utilization trap limit in minutes/day (0-1440 minutes). See Web, Analysis, Ethernet Utilization, Send trap if watermark hit duration exceeds. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.100 | ScalarlocMaximumTxModulation | read-only | current | The highest/maximum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.101 | ScalarlocActiveTxModulation | read-only | current | The active Tx modulation when ACM is enabled. See Web, Monitor, Performance, Tx modulation. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.102 | ScalarlocMinimumTxModulation | read-only | current | The lowest/minimum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.103 | ScalarlocMaximumRxModulation | read-only | current | The highest/maximum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.104 | ScalarlocActiveRxModulation | read-only | current | The active Rx modulation when ACM is enabled. See Web, Monitor, Performance, Rx modulation. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.105 | ScalarlocMinimumRxModulation | read-only | current | The lowest/minimum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.106 | ScalarlocMaximumTxEthernetThroughput | read-only | current | The highest/maximum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.107 | ScalarlocActiveTxEthernetThroughput | read-only | current | The active Tx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Tx Ethernet Throughput. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.108 | ScalarlocMinimumTxEthernetThroughput | read-only | current | The lowest/minimum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.109 | ScalarlocMaximumRxEthernetThroughput | read-only | current | The highest/maximum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.110 | ScalarlocActiveRxEthernetThroughput | read-only | current | The active Rx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Rx Ethernet Throughput. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.111 | ScalarlocMinimumRxEthernetThroughput | read-only | current | The lowest/minimum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput. |
| 1.3.6.1.4.1.25651.1.2.4.3.1.1000 | ScalarlocResetStats | read-write | current | Write 'reset' to locResetStats to clear the Performance statistics. |
| 1.3.6.1.4.1.25651.1.2.4.3.2 | NodeperfRemote | |||
| 1.3.6.1.4.1.25651.1.2.4.3.2.1 | ScalarremCurrentBER | read-only | current | The Curent Bit-Error Rate as scaled integer for far end radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. … |
| 1.3.6.1.4.1.25651.1.2.4.3.2.2 | ScalarremCurrentBERstr | read-only | current | The Current Bit-Error Rate as a string. Far end radio |
| 1.3.6.1.4.1.25651.1.2.4.3.2.3 | ScalarremCurrentRSL | read-only | current | Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect … |
| 1.3.6.1.4.1.25651.1.2.4.3.2.4 | ScalarremCurrentRSLstr | read-only | current | The Current RSL as a string. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.5 | ScalarremErrorDuration | read-only | current | The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics cou… |
| 1.3.6.1.4.1.25651.1.2.4.3.2.6 | ScalarremErrorDurationStr | read-only | current | The Error Duration as a formatted string. Far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.7 | ScalarremUnavailDuration | read-only | current | Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communi… |
| 1.3.6.1.4.1.25651.1.2.4.3.2.8 | ScalarremUnavailDurationStr | read-only | current | The Unavailable Duration as a formatted string. Far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.9 | ScalarremMinRSL | read-only | current | The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL, Remo… |
| 1.3.6.1.4.1.25651.1.2.4.3.2.10 | ScalarremMinRSLstr | read-only | current | The Minimum RSL value as a string. Far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.11 | ScalarremMinRSLtimestamp | read-only | current | The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp, Remote column. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.12 | ScalarremMaxRSL | read-only | current | The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL, Remote column. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.13 | ScalarremMaxRSLstr | read-only | current | The Maximum RSL level As string. Far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.14 | ScalarremSampleDuration | read-only | current | The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset, Remote column. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.15 | ScalarremSampleDurationStr | read-only | current | The Sample Duration value as a formatted string. Far end radio. |
| 1.3.6.1.4.1.25651.1.2.4.3.2.1000 | ScalarremResetStats | read-write | current | Write 'reset' to remResetStats to clear the Performance statistics. |
| 1.3.6.1.4.1.25651.1.2.4.5 | NodeuserThroughput | |||
| 1.3.6.1.4.1.25651.1.2.4.5.1 | ScalaraggregateUserThroughput | read-only | current | Aggregated User Throughput. For FDD radios this parameter is always equal to fullDuplexEthernetThroughput. |
| 1.3.6.1.4.1.25651.1.2.4.5.2 | ScalarinboundEthernetThroughput | read-only | current | Inbound Ethernet Throughput. For FDD radios this parameter is always N/A. |
| 1.3.6.1.4.1.25651.1.2.4.5.3 | ScalaroutboundEthernetThroughput | read-only | current | Outbound Ethernet Throughput. For FDD radios this parameter is always N/A. |
| 1.3.6.1.4.1.25651.1.2.4.5.4 | ScalarfullDuplexEthernetThroughput | read-only | current | The Full Duplex Ethernet Throughput is determined by the combination of settings for Mode and Bandwidth. See Web, Monitor, User Throughput, Full Duplex Etherne… |
| 1.3.6.1.4.1.25651.1.2.1000 | ScalarradioReboot | read-write | current | Reboot the radio device. Send 'reboot' to radioReboot parameter to reboot the radio device. |
| 1.3.6.1.4.1.25651.1.3 | NodeproductsMIBConformance | |||
| 1.3.6.1.4.1.25651.1.3.1 | NodeproductsMIBCompliances | |||
| 1.3.6.1.4.1.25651.1.3.2 | NodeproductsMIBGroups | |||
| 1.3.6.1.4.1.25651.1.3.2.1 | GroupproductsAllObjects | current | This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PwType | OCTET STRING (SIZE(8..16)) | current | This is a PW field. |