F10-IF-EXTENSION-MIB
51 objects
Dell Networking OS IF Extenstion MIB.
Imported Objects
| FORCE10-SMI | f10Mgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.3.11 | Identityf10IfExtensionMib | Dell Networking OS IF Extenstion MIB. | ||
| 1.3.6.1.4.1.6027.3.11.1 | Nodef10IfExtensionMibObject | |||
| 1.3.6.1.4.1.6027.3.11.1.1 | Nodef10IfExtensionParams | |||
| 1.3.6.1.4.1.6027.3.11.1.1.1 | Tablef10IfTable | not-accessible | current | Dell Networking OS Extension ifTable contains generic interface parameters. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1 | Rowf10IfEntry | not-accessible | current | A row defintion of Dell Networking OS Interface Extension parameters. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.1 | Columnf10IfIpMtu | read-write | current | The IP (Internet Protocol), Maximum Transmission Unit value. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.2 | Columnf10IfDuplexMode | read-write | current | Duplex mode of the interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.3 | Columnf10IfQueueingStrategy | read-only | current | Queueing strategy used for packets. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.4 | Columnf10IfRxFlowCtrl | read-write | current | Flow control receive. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.5 | Columnf10IfTxFlowCtrl | read-write | current | Flow Control transmit.This will be read-only only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.6 | Columnf10IfDescr | read-write | current | A textual string containing information about the interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.7 | Columnf10IfAdminStatus | read-write | current | A admin status of any interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.8 | Columnf10IfRateInterval | read-write | current | The rate info interval for the interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.9 | Columnf10IfSpeed | read-write | current | The interface's current bandwidth in bits per second. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.10 | Columnf10IfPortListBitPos | read-only | current | This is used for identifying the bit position in PortList Object for a given interface. |
| 1.3.6.1.4.1.6027.3.11.1.2 | Nodef10IfExtensionStats | |||
| 1.3.6.1.4.1.6027.3.11.1.2.1 | Tablef10IfStaticsTable | not-accessible | current | The statistcs information of the interfaces for performance monitoring. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1 | Rowf10IfStaticsEntry | not-accessible | current | A row defintion of Dell Networking OS Extension interface statistics. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.1 | Columnf10IfInVlanPkts | read-only | current | The total number of valid VLAN Tagged frames received. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.2 | Columnf10IfIn64BytePkts | read-only | current | The total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but in-cluding FCS octets). |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.3 | Columnf10ifIn65To127BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (ex-cluding framing bits but including FCS o… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.4 | Columnf10IfIn128To255BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS o… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.5 | Columnf10IfIn256To511BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS o… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.6 | Columnf10IfIn512To1023BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.7 | Columnf10IfInOver1023BytePkts | read-only | current | The total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and w… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.8 | Columnf10IfInThrottles | read-only | current | This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is re-ceived. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.9 | Columnf10IfInRunts | read-only | current | The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.10 | Columnf10IfInGiants | read-only | current | The total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and w… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.11 | Columnf10IfInCRC | read-only | current | The total number of frames received that had a length (ex-cluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a b… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.12 | Columnf10IfInOverruns | read-only | current | The total number of frames dropped because of buffer issue. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.13 | Columnf10IfOutVlanPkts | read-only | current | The Number of Good VLAN Tagged Frames sent successfully. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.14 | Columnf10IfOutUnderruns | read-only | current | The total number of frames dropped because of buffer underrun. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.15 | Columnf10IfOutUnicasts | read-only | current | The Number of Good Unicast Frames sent successfully. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.16 | Columnf10IfOutCollisions | read-only | current | A count of the frames that due to excessive or late collisions are not transmitted successfully. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.17 | Columnf10IfOutWredDrops | read-only | current | A count of the frames that are dropped using WRED policy because of to excessive traffic. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.18 | Columnf10IfOut64BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was 64 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.19 | Columnf10IfOut65To127BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 65 to 127 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.20 | Columnf10IfOut128To255BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 128 to 255 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.21 | Columnf10IfOut256To511BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 256 to 511 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.22 | Columnf10IfOut512To1023BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 512 to 1023 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.23 | Columnf10IfOutOver1023BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was greater than 1023 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.24 | Columnf10IfOutThrottles | read-only | current | This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.25 | Columnf10IfLastDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occ… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.26 | Columnf10IfInCentRate | read-only | current | This is the ingress rate in percentage. This is an integer value which can go from 0 to 100. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.27 | Columnf10IfOutCentRate | read-only | current | This is the egress rate in percentage. This is an integer value which can go from 0 to 100. |
| 1.3.6.1.4.1.6027.3.11.2 | Nodef10IfExtensionMibConformance | |||
| 1.3.6.1.4.1.6027.3.11.2.1 | Nodef10IfExtensionMibCompliances | |||
| 1.3.6.1.4.1.6027.3.11.2.1.1 | Compliancef10IfExtensionMibCompliance | current | The compliance statement for Dell Networking OS IF Extension MIB. | |
| 1.3.6.1.4.1.6027.3.11.2.2 | Nodef10IfExtensionMibGroups | |||
| 1.3.6.1.4.1.6027.3.11.2.2.1 | Groupf10IfParamsGroup | current | A collection of objects providing the Dell Networking OS IF Extenstion parameters. | |
| 1.3.6.1.4.1.6027.3.11.2.2.2 | Groupf10IfStatsGroup | current | A collection of objects providing the interface statistics. |