F5-BIGIP-SYSTEM-MIB
2176 objects
Top-level infrastructure of the F5 enterprise MIB tree.
Imported Objects
| F5-BIGIP-COMMON-MIB | bigipCompliances bigipGroups bigipTrafficMgmt LongDisplayString |
| HCNUM-TC | CounterBasedGauge64 |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| RFC1155-SMI | Gauge |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque TimeTicks |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3375.2.1 | IdentitybigipSystem | Top-level infrastructure of the F5 enterprise MIB tree. | ||
| 1.3.6.1.4.1.3375.2.1.1 | NodesysGlobals | |||
| 1.3.6.1.4.1.3375.2.1.1.1 | NodesysGlobalAttrs | |||
| 1.3.6.1.4.1.3375.2.1.1.1.1 | NodesysGlobalAttr | |||
| 1.3.6.1.4.1.3375.2.1.1.1.1.1 | ScalarsysAttrArpMaxEntries | read-only | current | The maximum number of dynamic entries which can be exist at one time. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.2 | ScalarsysAttrArpAddReciprocal | read-only | current | When enabled add the IP/MAC address of an ARP requester into the ARP table. Enabling this field can allow a malicious user on the local net to poison the ARP c… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.3 | ScalarsysAttrArpTimeout | read-only | current | Determine how long (in seconds) ARP entries are kept in the cache before being marked stale. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.4 | ScalarsysAttrArpRetries | read-only | current | The maximum number of times to request an ARP before giving up and marking the IP address as unavailable. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.5 | ScalarsysAttrBootQuiet | read-only | current | The behavior of boot message display during a reboot of the system. Enabling this suppresses the messages. Disabling this displays messages. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.6 | ScalarsysAttrConfigsyncState | read-only | deprecated | Deprecated! Replaced by sysCmSyncStatus and sysCmSyncStatusDetails. Enumerated state between peer systems. -1 - uninitialized or disabled config state 0 - Sync… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.7 | ScalarsysAttrConnAdaptiveReaperHiwat | read-only | current | The high threshold for dynamic reaper, at which point no new connection will be allowed. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.8 | ScalarsysAttrConnAdaptiveReaperLowat | read-only | current | The low threshold for dynamic reaper, at which point the reaper will kick in. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.9 | ScalarsysAttrConnAutoLasthop | read-only | current | The behavior of automatic last hop pools. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.10 | ScalarsysAttrFailoverActiveMode | read-only | deprecated | Deprecated! The redundant pair mode. Enabling is to use active-active mode. By default this is disable, active-standby mode is used. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.11 | ScalarsysAttrFailoverForceActive | read-only | deprecated | Deprecated! The behavior of failover. Enabling makes failover daemon always attempt to become the active unit. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.12 | ScalarsysAttrFailoverForceStandby | read-only | deprecated | Deprecated! The behavior of failover. Enabling makes failover daemon go to standby whenever is senses its peer alive. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.13 | ScalarsysAttrFailoverIsRedundant | read-only | current | The redundant mode of the system. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.14 | ScalarsysAttrFailoverMemoryRestartPercent | read-only | deprecated | Deprecated! Refer sysAttrConnAdaptiveReaperHiwat and sysAttrConnAdaptiveReaperLowat for memory threshold when TMM (Traffic Management Module) takes actions. Th… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.15 | ScalarsysAttrFailoverNetwork | read-only | current | The behavior of using the network as a backup to, or instead of, the serial line for failover if this value is 1. By default this feature is disabled. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.16 | ScalarsysAttrFailoverStandbyLinkDownTime | read-only | current | How long the external link is held down when the unit fails over and becomes standby. This is so an external switch will update its L2 tables and use the newly… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.17 | ScalarsysAttrFailoverSslhardware | read-only | deprecated | Deprecated! This feature has been eliminated. Enables/disables the action prescribed by sysAttrFailoverSslhardwareAction (failover or reboot). |
| 1.3.6.1.4.1.3375.2.1.1.1.1.18 | ScalarsysAttrFailoverSslhardwareAction | read-only | deprecated | Deprecated! This feature has been eliminated. This is controlled by the sysAttrFailoverSslhardware. If sysAttrFailoverSslhardware is enabled, the action prescr… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.19 | ScalarsysAttrFailoverUnitMask | read-only | deprecated | Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and sysCmFailoverStatusDetails. This data indicates whether the machine is active or standby… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.20 | ScalarsysAttrFailoverUnitId | read-only | deprecated | Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and sysCmFailoverStatusDetails. The controller unique unit id, 1 or 2, in the event that net… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.21 | ScalarsysAttrModeMaint | read-only | current | The state of system maintenance mode. disable - not in maintenance mode; enable - maintenance mode. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.22 | ScalarsysAttrPacketFilter | read-only | current | This option globally enables or disables processing of all packet filter options, including the rule list. The packet filter is enabled by default. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.23 | ScalarsysAttrPacketFilterAllowImportantIcmp | read-only | current | This option causes the packet filter to automatically accept a number of important ICMP types without requiring the addition of a rule to handle them. Acceptan… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.24 | ScalarsysAttrPacketFilterEstablished | read-only | current | The status of filter established feature. This option controls whether or not filter rules are applied to packets which are part of an existing, established co… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.25 | ScalarsysAttrPacketFilterDefaultAction | read-only | current | The filter default action. This variable controls how to handle packets which did not match any rules. It can be either accept, discard or reject. The default … |
| 1.3.6.1.4.1.3375.2.1.1.1.1.26 | ScalarsysAttrPacketFilterSendIcmpErrors | read-only | current | The feature to control the kind of errors to send for REJECT rules. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.27 | ScalarsysAttrPvaAcceleration | read-only | current | The type of hardware acceleration desired. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.28 | ScalarsysAttrVlanFDBTimeout | read-only | current | Controls how long before an entry expires in the L2 forwarding database. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.29 | ScalarsysAttrWatchdogState | read-only | current | The state of watch dog feature - a hardware device that monitors the system for hardware failure. |
| 1.3.6.1.4.1.3375.2.1.1.2 | NodesysGlobalStats | |||
| 1.3.6.1.4.1.3375.2.1.1.2.1 | NodesysGlobalStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.1.1 | ScalarsysStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset… |
| 1.3.6.1.4.1.3375.2.1.1.2.1.2 | ScalarsysStatClientPktsIn | read-only | current | The number of packets received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.3 | ScalarsysStatClientBytesIn | read-only | current | The number of bytes received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.4 | ScalarsysStatClientPktsOut | read-only | current | The number of packets sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.5 | ScalarsysStatClientBytesOut | read-only | current | The number of bytes sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.6 | ScalarsysStatClientMaxConns | read-only | current | The maximum connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.7 | ScalarsysStatClientTotConns | read-only | current | The total connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.8 | ScalarsysStatClientCurConns | read-only | current | The current connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.9 | ScalarsysStatServerPktsIn | read-only | current | The number of packets received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.10 | ScalarsysStatServerBytesIn | read-only | current | The number of bytes received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.11 | ScalarsysStatServerPktsOut | read-only | current | The number of packets sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.12 | ScalarsysStatServerBytesOut | read-only | current | The number of bytes sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.13 | ScalarsysStatServerMaxConns | read-only | current | The maximum connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.14 | ScalarsysStatServerTotConns | read-only | current | The total connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.15 | ScalarsysStatServerCurConns | read-only | current | The current connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.16 | ScalarsysStatPvaClientPktsIn | read-only | current | The number of hardware accelerated packets received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.17 | ScalarsysStatPvaClientBytesIn | read-only | current | The number of hardware accelerated bytes received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.18 | ScalarsysStatPvaClientPktsOut | read-only | current | The number of hardware accelerated packets sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.19 | ScalarsysStatPvaClientBytesOut | read-only | current | The number of hardware accelerated bytes sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.20 | ScalarsysStatPvaClientMaxConns | read-only | current | The maximum hardware accelerated connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.21 | ScalarsysStatPvaClientTotConns | read-only | current | The total hardware accelerated connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.22 | ScalarsysStatPvaClientCurConns | read-only | current | The current hardware accelerated connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.23 | ScalarsysStatPvaServerPktsIn | read-only | current | The number of hardware accelerated packets received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.24 | ScalarsysStatPvaServerBytesIn | read-only | current | The number of hardware accelerated bytes received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.25 | ScalarsysStatPvaServerPktsOut | read-only | current | The number of hardware accelerated packets sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.26 | ScalarsysStatPvaServerBytesOut | read-only | current | The number of hardware accelerated bytes sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.27 | ScalarsysStatPvaServerMaxConns | read-only | current | The maximum hardware accelerated connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.28 | ScalarsysStatPvaServerTotConns | read-only | current | The total hardware accelerated connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.29 | ScalarsysStatPvaServerCurConns | read-only | current | The current hardware accelerated connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.30 | ScalarsysStatTotPvaAssistConn | read-only | current | The total number of the partially hardware accelerated connections on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.31 | ScalarsysStatCurrPvaAssistConn | read-only | current | The current number of the partially hardware accelerated connections on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.32 | ScalarsysStatMaintenanceModeDeny | read-only | current | The connection requests rejected because the virtual server was in maintenance mode. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.33 | ScalarsysStatMaxConnVirtualPathDeny | read-only | current | The connection requests rejected because they exceeded the connection limit for a virtual server (IP:port). |
| 1.3.6.1.4.1.3375.2.1.1.2.1.34 | ScalarsysStatVirtualServerNonSynDeny | read-only | current | The packets that are not connection requests and are destined for a virtual server that has no connection for the client address. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.35 | ScalarsysStatNoHandlerDeny | read-only | current | The incoming packets that could not be processed by a a virtual server, NAT, or SNAT. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.36 | ScalarsysStatLicenseDeny | read-only | current | The packets which were dropped due to exceeding licensing limitations. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.37 | ScalarsysStatConnectionMemoryErrors | read-only | current | The errors of that connection could not be created because memory was not available. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.38 | ScalarsysStatCpuCount | read-only | current | The number of CPUs on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.39 | ScalarsysStatActiveCpuCount | read-only | current | The number of active CPUs on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.40 | ScalarsysStatMultiProcessorMode | read-only | deprecated | Deprecated! Used to refer to the mode the system's processors were running in. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.41 | ScalarsysStatTmTotalCycles | read-only | current | Traffic management CPU usage. The total cycles spent in traffic management. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.42 | ScalarsysStatTmIdleCycles | read-only | current | Traffic management CPU usage. The cycles spent polling with no traffic. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.43 | ScalarsysStatTmSleepCycles | read-only | current | Traffic management CPU usage. The cycles yielded. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.44 | ScalarsysStatMemoryTotal | read-only | current | The total memory available in bytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.1.45 | ScalarsysStatMemoryUsed | read-only | current | The memory in use in bytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.1.46 | ScalarsysStatDroppedPackets | read-only | current | The total dropped packets. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.47 | ScalarsysStatIncomingPacketErrors | read-only | current | The total incoming packet errors for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.48 | ScalarsysStatOutgoingPacketErrors | read-only | current | The total outgoing packet errors for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.49 | ScalarsysStatAuthTotSessions | read-only | current | The total number of concurrent auth sessions on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.50 | ScalarsysStatAuthCurSessions | read-only | current | The current number of concurrent auth sessions on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.51 | ScalarsysStatAuthMaxSessions | read-only | current | The maximum number of concurrent auth sessions on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.52 | ScalarsysStatAuthSuccessResults | read-only | current | The total number of auth success results (That is when a successful authorization has completed all of the required auth services.) on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.53 | ScalarsysStatAuthFailureResults | read-only | current | The total number of auth failure results (That is when an unsuccessful authorization operation has completed.) on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.54 | ScalarsysStatAuthWantcredentialResults | read-only | current | The total number of auth wantcredential results (That is when an authorization operation needs an additional credential.) on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.55 | ScalarsysStatAuthErrorResults | read-only | current | The total number of auth error results (That is when an error occurred during authorization has occurred.) on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.56 | ScalarsysStatHttpRequests | read-only | current | The total number of HTTP requests to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.57 | ScalarsysStatHardSyncookieGen | read-only | current | The number of hardware SYN cookies are generated on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.58 | ScalarsysStatHardSyncookieDet | read-only | current | The number of hardware SYN cookies are detected on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.59 | ScalarsysStatClientPktsIn5s | read-only | current | The average number of packets received by the system from client-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.60 | ScalarsysStatClientBytesIn5s | read-only | current | The average number of bytes received by the system from client-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.61 | ScalarsysStatClientPktsOut5s | read-only | current | The average number of packets sent to client-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.62 | ScalarsysStatClientBytesOut5s | read-only | current | The average number of bytes sent to client-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.63 | ScalarsysStatClientMaxConns5s | read-only | current | The average maximum connections from client-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.64 | ScalarsysStatClientTotConns5s | read-only | current | The average total connections from client-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.65 | ScalarsysStatClientCurConns5s | read-only | current | The average current connections from client-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.66 | ScalarsysStatServerPktsIn5s | read-only | current | The average number of packets received by the system from server-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.67 | ScalarsysStatServerBytesIn5s | read-only | current | The average number of bytes received by the system from server-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.68 | ScalarsysStatServerPktsOut5s | read-only | current | The average number of packets sent to server-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.69 | ScalarsysStatServerBytesOut5s | read-only | current | The average number of bytes sent to server-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.70 | ScalarsysStatServerMaxConns5s | read-only | current | The average maximum connections from server-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.71 | ScalarsysStatServerTotConns5s | read-only | current | The average total connections from server-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.72 | ScalarsysStatServerCurConns5s | read-only | current | The average current connections from server-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.73 | ScalarsysStatClientPktsIn1m | read-only | current | The average number of packets received by the system from client-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.74 | ScalarsysStatClientBytesIn1m | read-only | current | The average number of bytes received by the system from client-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.75 | ScalarsysStatClientPktsOut1m | read-only | current | The average number of packets sent to client-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.76 | ScalarsysStatClientBytesOut1m | read-only | current | The average number of bytes sent to client-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.77 | ScalarsysStatClientMaxConns1m | read-only | current | The average maximum connections from client-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.78 | ScalarsysStatClientTotConns1m | read-only | current | The average total connections from client-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.79 | ScalarsysStatClientCurConns1m | read-only | current | The average current connections from client-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.80 | ScalarsysStatServerPktsIn1m | read-only | current | The average number of packets received by the system from server-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.81 | ScalarsysStatServerBytesIn1m | read-only | current | The average number of bytes received by the system from server-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.82 | ScalarsysStatServerPktsOut1m | read-only | current | The average number of packets sent to server-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.83 | ScalarsysStatServerBytesOut1m | read-only | current | The average number of bytes sent to server-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.84 | ScalarsysStatServerMaxConns1m | read-only | current | The average maximum connections from server-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.85 | ScalarsysStatServerTotConns1m | read-only | current | The average total connections from server-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.86 | ScalarsysStatServerCurConns1m | read-only | current | The average current connections from server-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.87 | ScalarsysStatClientPktsIn5m | read-only | current | The average average number of packets received by the system from client-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.88 | ScalarsysStatClientBytesIn5m | read-only | current | The average number of bytes received by the system from client-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.89 | ScalarsysStatClientPktsOut5m | read-only | current | The average number of packets sent to client-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.90 | ScalarsysStatClientBytesOut5m | read-only | current | The average number of bytes sent to client-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.91 | ScalarsysStatClientMaxConns5m | read-only | current | The average maximum connections from client-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.92 | ScalarsysStatClientTotConns5m | read-only | current | The average total connections from client-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.93 | ScalarsysStatClientCurConns5m | read-only | current | The average current connections from client-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.94 | ScalarsysStatServerPktsIn5m | read-only | current | The average number of packets received by the system from server-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.95 | ScalarsysStatServerBytesIn5m | read-only | current | The average number of bytes received by the system from server-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.96 | ScalarsysStatServerPktsOut5m | read-only | current | The average number of packets sent to server-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.97 | ScalarsysStatServerBytesOut5m | read-only | current | The average number of bytes sent to server-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.98 | ScalarsysStatServerMaxConns5m | read-only | current | The average maximum connections from server-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.99 | ScalarsysStatServerTotConns5m | read-only | current | The average total connections from server-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.100 | ScalarsysStatServerCurConns5m | read-only | current | The average current connections from server-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.101 | ScalarsysStatPvaClientPktsIn5s | read-only | current | The average number of hardware accelerated packets received by the system from client-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.102 | ScalarsysStatPvaClientBytesIn5s | read-only | current | The average number of hardware accelerated bytes received by the system from client-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.103 | ScalarsysStatPvaClientPktsOut5s | read-only | current | The average number of hardware accelerated packets sent to client-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.104 | ScalarsysStatPvaClientBytesOut5s | read-only | current | The average number of hardware accelerated bytes sent to client-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.105 | ScalarsysStatPvaClientMaxConns5s | read-only | current | The average maximum hardware accelerated connections from client-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.106 | ScalarsysStatPvaClientTotConns5s | read-only | current | The average total hardware accelerated connections from client-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.107 | ScalarsysStatPvaClientCurConns5s | read-only | current | The average current hardware accelerated connections from client-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.108 | ScalarsysStatPvaServerPktsIn5s | read-only | current | The average number of hardware accelerated packets received by the system from server-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.109 | ScalarsysStatPvaServerBytesIn5s | read-only | current | The average number of hardware accelerated bytes received by the system from server-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.110 | ScalarsysStatPvaServerPktsOut5s | read-only | current | The average number of hardware accelerated packets sent to server-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.111 | ScalarsysStatPvaServerBytesOut5s | read-only | current | The average number of hardware accelerated bytes sent to server-side from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.112 | ScalarsysStatPvaServerMaxConns5s | read-only | current | The average maximum hardware accelerated connections from server-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.113 | ScalarsysStatPvaServerTotConns5s | read-only | current | The average total hardware accelerated connections from server-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.114 | ScalarsysStatPvaServerCurConns5s | read-only | current | The average current hardware accelerated connections from server-side to the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.115 | ScalarsysStatPvaClientPktsIn1m | read-only | current | The average number of hardware accelerated packets received by the system from client-side in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.116 | ScalarsysStatPvaClientBytesIn1m | read-only | current | The average number of hardware accelerated bytes received by the system from client-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.117 | ScalarsysStatPvaClientPktsOut1m | read-only | current | The average number of hardware accelerated packets sent to client-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.118 | ScalarsysStatPvaClientBytesOut1m | read-only | current | The average number of hardware accelerated bytes sent to client-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.119 | ScalarsysStatPvaClientMaxConns1m | read-only | current | The average maximum hardware accelerated connections from client-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.120 | ScalarsysStatPvaClientTotConns1m | read-only | current | The average total hardware accelerated connections from client-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.121 | ScalarsysStatPvaClientCurConns1m | read-only | current | The average current hardware accelerated connections from client-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.122 | ScalarsysStatPvaServerPktsIn1m | read-only | current | The average number of hardware accelerated packets received by the system from server-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.123 | ScalarsysStatPvaServerBytesIn1m | read-only | current | The average number of hardware accelerated bytes received by the system from server-side in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.124 | ScalarsysStatPvaServerPktsOut1m | read-only | current | The average number of hardware accelerated packets sent to server-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.125 | ScalarsysStatPvaServerBytesOut1m | read-only | current | The average number of hardware accelerated bytes sent to server-side from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.126 | ScalarsysStatPvaServerMaxConns1m | read-only | current | The average maximum hardware accelerated connections from server-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.127 | ScalarsysStatPvaServerTotConns1m | read-only | current | The average total hardware accelerated connections from server-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.128 | ScalarsysStatPvaServerCurConns1m | read-only | current | The average current hardware accelerated connections from server-side to the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.129 | ScalarsysStatPvaClientPktsIn5m | read-only | current | The average number of hardware accelerated packets received by the system from client-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.130 | ScalarsysStatPvaClientBytesIn5m | read-only | current | The average number of hardware accelerated bytes received by the system from client-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.131 | ScalarsysStatPvaClientPktsOut5m | read-only | current | The average number of hardware accelerated packets sent to client-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.132 | ScalarsysStatPvaClientBytesOut5m | read-only | current | The average number of hardware accelerated bytes sent to client-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.133 | ScalarsysStatPvaClientMaxConns5m | read-only | current | The average maximum hardware accelerated connections from client-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.134 | ScalarsysStatPvaClientTotConns5m | read-only | current | The average total hardware accelerated connections from client-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.135 | ScalarsysStatPvaClientCurConns5m | read-only | current | The average current hardware accelerated connections from client-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.136 | ScalarsysStatPvaServerPktsIn5m | read-only | current | The average number of hardware accelerated packets received by the system from server-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.137 | ScalarsysStatPvaServerBytesIn5m | read-only | current | The average number of hardware accelerated bytes received by the system from server-side in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.138 | ScalarsysStatPvaServerPktsOut5m | read-only | current | The average number of hardware accelerated packets sent to server-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.139 | ScalarsysStatPvaServerBytesOut5m | read-only | current | The average number of hardware accelerated bytes sent to server-side from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.140 | ScalarsysStatPvaServerMaxConns5m | read-only | current | The average maximum hardware accelerated connections from server-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.141 | ScalarsysStatPvaServerTotConns5m | read-only | current | The average total hardware accelerated connections from server-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.142 | ScalarsysStatPvaServerCurConns5m | read-only | current | The average current hardware accelerated connections from server-side to the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.1.143 | ScalarsysStatMemoryTotalKb | read-only | current | The total memory available in Kilobytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.1.144 | ScalarsysStatMemoryUsedKb | read-only | current | The memory in use in Kilobytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.2 | NodesysGlobalAuthStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.2.1 | ScalarsysAuthStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalAuthStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.2.2 | ScalarsysAuthStatTotSessions | read-only | current | The total number of concurrent auth sessions. |
| 1.3.6.1.4.1.3375.2.1.1.2.2.3 | ScalarsysAuthStatCurSessions | read-only | current | The current number of concurrent auth sessions. |
| 1.3.6.1.4.1.3375.2.1.1.2.2.4 | ScalarsysAuthStatMaxSessions | read-only | current | The maximum number of concurrent auth sessions |
| 1.3.6.1.4.1.3375.2.1.1.2.2.5 | ScalarsysAuthStatSuccessResults | read-only | current | The total number of auth success results (That is when a successful authorization has completed all of the required auth services.). |
| 1.3.6.1.4.1.3375.2.1.1.2.2.6 | ScalarsysAuthStatFailureResults | read-only | current | The total number of auth failure results (That is when an unsuccessful authorization operation has completed.). |
| 1.3.6.1.4.1.3375.2.1.1.2.2.7 | ScalarsysAuthStatWantcredentialResults | read-only | current | The total number of auth wantcredential results (That is when an authorization operation needs an additional credential.) |
| 1.3.6.1.4.1.3375.2.1.1.2.2.8 | ScalarsysAuthStatErrorResults | read-only | current | The total number of auth error results (That is when an error occurred during authorization has occurred.). |
| 1.3.6.1.4.1.3375.2.1.1.2.3 | NodesysGlobalConnPoolStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.3.1 | ScalarsysConnPoolStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalConnPoolStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not … |
| 1.3.6.1.4.1.3375.2.1.1.2.3.2 | ScalarsysConnPoolStatCurSize | read-only | current | The number of currently idle connections in pools on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.3.3 | ScalarsysConnPoolStatMaxSize | read-only | current | The number of idle connections in pools on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.3.4 | ScalarsysConnPoolStatReuses | read-only | current | The number of times a connection was reused from pools on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.3.5 | ScalarsysConnPoolStatConnects | read-only | current | The number of times a new connection was initiated in pools on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.4 | NodesysGlobalHttpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.4.1 | ScalarsysHttpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalHttpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.4.2 | ScalarsysHttpStatCookiePersistInserts | read-only | current | The number of successful attempts to insert HTTP headers for cookie persistence (set-cookie header insertions). |
| 1.3.6.1.4.1.3375.2.1.1.2.4.3 | ScalarsysHttpStatResp2xxCnt | read-only | current | The number of server-side responses in range of 200 to 206 (successful responses) |
| 1.3.6.1.4.1.3375.2.1.1.2.4.4 | ScalarsysHttpStatResp3xxCnt | read-only | current | The number of server-side responses in range of 300 to 307 (redirection responses). |
| 1.3.6.1.4.1.3375.2.1.1.2.4.5 | ScalarsysHttpStatResp4xxCnt | read-only | current | The number of server-side responses in range of 400 to 417 (client errors). |
| 1.3.6.1.4.1.3375.2.1.1.2.4.6 | ScalarsysHttpStatResp5xxCnt | read-only | current | The number of server-side responses in range of 500 to 505 (server errors). |
| 1.3.6.1.4.1.3375.2.1.1.2.4.7 | ScalarsysHttpStatNumberReqs | read-only | current | The total number of HTTP requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.8 | ScalarsysHttpStatGetReqs | read-only | current | The total number of HTTP get requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.9 | ScalarsysHttpStatPostReqs | read-only | current | The total number of HTTP post requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.10 | ScalarsysHttpStatV9Reqs | read-only | current | The total number of version 9 requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.11 | ScalarsysHttpStatV10Reqs | read-only | current | The total number of version 10 requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.12 | ScalarsysHttpStatV11Reqs | read-only | current | The total number of version 11 requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.13 | ScalarsysHttpStatV9Resp | read-only | current | The total number of version 9 responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.14 | ScalarsysHttpStatV10Resp | read-only | current | The total number of version 10 responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.15 | ScalarsysHttpStatV11Resp | read-only | current | The total number of version 11 responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.16 | ScalarsysHttpStatMaxKeepaliveReq | read-only | current | The maximum number of requests made in a connection. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.17 | ScalarsysHttpStatRespBucket1k | read-only | current | The number of responses under 1k. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.18 | ScalarsysHttpStatRespBucket4k | read-only | current | The number of responses under 1 - 4k. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.19 | ScalarsysHttpStatRespBucket16k | read-only | current | The number of responses under 4 - 16k. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.20 | ScalarsysHttpStatRespBucket32k | read-only | current | The number of responses under 16 - 32k. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.21 | ScalarsysHttpStatPrecompressBytes | read-only | deprecated | Deprecated! The number of response bytes before compression has taken place. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.22 | ScalarsysHttpStatPostcompressBytes | read-only | deprecated | Deprecated! The number of response bytes after compression has taken place. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.23 | ScalarsysHttpStatNullCompressBytes | read-only | deprecated | Deprecated! The number of bytes subjected to NULL compression (for license enforcement). |
| 1.3.6.1.4.1.3375.2.1.1.2.4.24 | ScalarsysHttpStatHtmlPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: HTML. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.25 | ScalarsysHttpStatHtmlPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: HTML. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.26 | ScalarsysHttpStatCssPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: CSS. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.27 | ScalarsysHttpStatCssPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: CSS. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.28 | ScalarsysHttpStatJsPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: Javascript. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.29 | ScalarsysHttpStatJsPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: Javascript. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.30 | ScalarsysHttpStatXmlPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: XML. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.31 | ScalarsysHttpStatXmlPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: XML. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.32 | ScalarsysHttpStatSgmlPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: SGML. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.33 | ScalarsysHttpStatSgmlPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: SGML. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.34 | ScalarsysHttpStatPlainPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: Plain. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.35 | ScalarsysHttpStatPlainPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: Plain. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.36 | ScalarsysHttpStatOctetPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: Octet stream. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.37 | ScalarsysHttpStatOctetPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: Octet stream. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.38 | ScalarsysHttpStatImagePrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: Images. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.39 | ScalarsysHttpStatImagePostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: Images. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.40 | ScalarsysHttpStatVideoPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: Video files. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.41 | ScalarsysHttpStatVideoPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: Video files. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.42 | ScalarsysHttpStatAudioPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.43 | ScalarsysHttpStatAudioPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.44 | ScalarsysHttpStatOtherPrecompressBytes | read-only | deprecated | Deprecated! The number of precompressed bytes for the MIME-Types: other than HTML, CSS, Javascript, XML, SGML, Plain, Images, Video files, Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.45 | ScalarsysHttpStatOtherPostcompressBytes | read-only | deprecated | Deprecated! The number of postcompressed bytes for the MIME-Types: other than HTML, CSS, Javascript, XML, SGML, Plain, Images, Video files, Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.46 | ScalarsysHttpStatRamcacheHits | read-only | deprecated | Deprecated! The number of RAM cache hits. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.47 | ScalarsysHttpStatRamcacheMisses | read-only | deprecated | Deprecated! The number of RAM cache misses, excluding un-cacheable data. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.48 | ScalarsysHttpStatRamcacheMissesAll | read-only | deprecated | Deprecated! The total number of RAM cache misses. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.49 | ScalarsysHttpStatRamcacheHitBytes | read-only | deprecated | Deprecated! The number of RAM cache hits in bytes. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.50 | ScalarsysHttpStatRamcacheMissBytes | read-only | deprecated | Deprecated! The number of RAM cache misses in bytes, excluding un-cacheable data. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.51 | ScalarsysHttpStatRamcacheMissBytesAll | read-only | deprecated | Deprecated! The total number of RAM cache misses in bytes. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.52 | ScalarsysHttpStatRamcacheSize | read-only | deprecated | Deprecated! The Ram cache current size. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.53 | ScalarsysHttpStatRamcacheCount | read-only | deprecated | Deprecated! The number of items stored in Ram cache. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.54 | ScalarsysHttpStatRamcacheEvictions | read-only | deprecated | Deprecated! The number of Ram cache evictions. |
| 1.3.6.1.4.1.3375.2.1.1.2.4.55 | ScalarsysHttpStatRespBucket64k | read-only | deprecated | Deprecated! Please use the larger buckets. |
| 1.3.6.1.4.1.3375.2.1.1.2.5 | NodesysGlobalIcmpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.5.1 | ScalarsysIcmpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalIcmpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.5.2 | ScalarsysIcmpStatTx | read-only | current | The total number of ICMP messages which this entity attempted to send. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.3 | ScalarsysIcmpStatRx | read-only | current | The total number of ICMP messages which the entity received. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.4 | ScalarsysIcmpStatForward | read-only | current | The number of ICMP messages which the entity forwarded. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.5 | ScalarsysIcmpStatDrop | read-only | current | The number of ICMP messages which the entity dropped. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.6 | ScalarsysIcmpStatErrCksum | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors, bad ICMP checksums. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.7 | ScalarsysIcmpStatErrLen | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors, bad ICMP bad length. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.8 | ScalarsysIcmpStatErrMem | read-only | current | The number of memory allocation errors in the process. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.9 | ScalarsysIcmpStatErrRtx | read-only | current | The number of routing errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.10 | ScalarsysIcmpStatErrProto | read-only | current | The number of ICMP messages which the entity received but determined as having protocol errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.11 | ScalarsysIcmpStatErrOpt | read-only | current | The number of errors in options. |
| 1.3.6.1.4.1.3375.2.1.1.2.5.12 | ScalarsysIcmpStatErr | read-only | current | The number of other not specified errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.6 | NodesysGlobalIcmp6Stat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.6.1 | ScalarsysIcmp6StatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalIcmp6Stat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be … |
| 1.3.6.1.4.1.3375.2.1.1.2.6.2 | ScalarsysIcmp6StatTx | read-only | current | The total number of ICMP messages which this entity attempted to send. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.3 | ScalarsysIcmp6StatRx | read-only | current | The total number of ICMP messages which the entity received. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.4 | ScalarsysIcmp6StatForward | read-only | current | The number of ICMP messages which the entity forwarded. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.5 | ScalarsysIcmp6StatDrop | read-only | current | The number of ICMP messages which the entity dropped. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.6 | ScalarsysIcmp6StatErrCksum | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors, bad ICMP checksums. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.7 | ScalarsysIcmp6StatErrLen | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors, bad ICMP bad length. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.8 | ScalarsysIcmp6StatErrMem | read-only | current | The number of memory allocation errors in the process. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.9 | ScalarsysIcmp6StatErrRtx | read-only | current | The number of routing errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.10 | ScalarsysIcmp6StatErrProto | read-only | current | The number of ICMP messages which the entity received but determined as having protocol errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.11 | ScalarsysIcmp6StatErrOpt | read-only | current | The number of errors in options. |
| 1.3.6.1.4.1.3375.2.1.1.2.6.12 | ScalarsysIcmp6StatErr | read-only | current | The number of other not specified errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.7 | NodesysGlobalIpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.7.1 | ScalarsysIpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalIpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be res… |
| 1.3.6.1.4.1.3375.2.1.1.2.7.2 | ScalarsysIpStatTx | read-only | current | The total number of transmitted datagrams to interfaces. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.3 | ScalarsysIpStatRx | read-only | current | The total number of received datagrams from interfaces. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.4 | ScalarsysIpStatDropped | read-only | current | The total number of dropped datagrams. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.5 | ScalarsysIpStatRxFrag | read-only | current | The number of received IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.6 | ScalarsysIpStatRxFragDropped | read-only | current | The number of received IP datagrams that have been dropped because they needed to be fragmented at this entity but could not be. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.7 | ScalarsysIpStatTxFrag | read-only | current | The number of transmitted IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.8 | ScalarsysIpStatTxFragDropped | read-only | current | The number of transmitted IP datagrams that have been dropped because they needed to be fragmented at this entity but could not be. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.9 | ScalarsysIpStatReassembled | read-only | current | The number of IP datagrams successfully reassembled. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.10 | ScalarsysIpStatErrCksum | read-only | current | The number of datagrams discarded due to errors in their IP headers, bad checksums. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.11 | ScalarsysIpStatErrLen | read-only | current | The number of IP datagrams discarded due to errors in their IP headers, bad length. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.12 | ScalarsysIpStatErrMem | read-only | current | The number of memory allocation errors in the packet process. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.13 | ScalarsysIpStatErrRtx | read-only | current | The number of routing errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.14 | ScalarsysIpStatErrProto | read-only | current | The number of IP datagrams discarded due to errors in their protocols. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.15 | ScalarsysIpStatErrOpt | read-only | current | The number of errors in options. |
| 1.3.6.1.4.1.3375.2.1.1.2.7.16 | ScalarsysIpStatErrReassembledTooLong | read-only | current | The number of IP datagrams discarded due to errors of reassembled too long. |
| 1.3.6.1.4.1.3375.2.1.1.2.8 | NodesysGlobalIp6Stat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.8.1 | ScalarsysIp6StatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalIp6Stat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.8.2 | ScalarsysIp6StatTx | read-only | current | The total number of transmitted datagrams to interfaces. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.3 | ScalarsysIp6StatRx | read-only | current | The total number of received datagrams from interfaces. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.4 | ScalarsysIp6StatDropped | read-only | current | The total number of dropped datagrams. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.5 | ScalarsysIp6StatRxFrag | read-only | current | The number of received IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.6 | ScalarsysIp6StatRxFragDropped | read-only | current | The number of received IP datagrams that have been dropped because they needed to be fragmented at this entity but could not be. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.7 | ScalarsysIp6StatTxFrag | read-only | current | The number of transmitted IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.8 | ScalarsysIp6StatTxFragDropped | read-only | current | The number of transmitted IP datagrams that have been dropped because they needed to be fragmented at this entity but could not be. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.9 | ScalarsysIp6StatReassembled | read-only | current | The number of IP datagrams successfully reassembled. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.10 | ScalarsysIp6StatErrCksum | read-only | current | The number of datagrams discarded due to errors in their IP headers, bad checksums. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.11 | ScalarsysIp6StatErrLen | read-only | current | The number of IP datagrams discarded due to errors in their IP headers, bad length. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.12 | ScalarsysIp6StatErrMem | read-only | current | The number of memory allocation errors in the packet process. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.13 | ScalarsysIp6StatErrRtx | read-only | current | The number of routing errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.14 | ScalarsysIp6StatErrProto | read-only | current | The number of IP datagrams discarded due to errors in their protocols. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.15 | ScalarsysIp6StatErrOpt | read-only | current | The number of errors in options. |
| 1.3.6.1.4.1.3375.2.1.1.2.8.16 | ScalarsysIp6StatErrReassembledTooLong | read-only | current | The number of IP datagrams discarded due to errors of reassembled too long. |
| 1.3.6.1.4.1.3375.2.1.1.2.9 | NodesysGlobalClientSslStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.9.1 | ScalarsysClientsslStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalClientSslStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not… |
| 1.3.6.1.4.1.3375.2.1.1.2.9.2 | ScalarsysClientsslStatCurConns | read-only | current | The current number of concurrent connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.3 | ScalarsysClientsslStatMaxConns | read-only | current | The maximum number of concurrent connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.4 | ScalarsysClientsslStatCurNativeConns | read-only | current | The current number of concurrent native connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.5 | ScalarsysClientsslStatMaxNativeConns | read-only | current | The maximum number of concurrent native connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.6 | ScalarsysClientsslStatTotNativeConns | read-only | current | The total number of concurrent native connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.7 | ScalarsysClientsslStatCurCompatConns | read-only | current | The current number of concurrent compat connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.8 | ScalarsysClientsslStatMaxCompatConns | read-only | current | The maximum number of concurrent compat connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.9 | ScalarsysClientsslStatTotCompatConns | read-only | current | The total number of concurrent compat connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.10 | ScalarsysClientsslStatEncryptedBytesIn | read-only | current | The total encrypted bytes received. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.11 | ScalarsysClientsslStatEncryptedBytesOut | read-only | current | The total encrypted bytes sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.12 | ScalarsysClientsslStatDecryptedBytesIn | read-only | current | The total decrypted bytes received. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.13 | ScalarsysClientsslStatDecryptedBytesOut | read-only | current | The total decrypted bytes sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.14 | ScalarsysClientsslStatRecordsIn | read-only | current | The total records received. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.15 | ScalarsysClientsslStatRecordsOut | read-only | current | The total records sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.16 | ScalarsysClientsslStatFullyHwAcceleratedConns | read-only | current | Fully hardware-accelerated implies usage of the Cavium Nitrox or similar hardware accelerator such that all significant cryptographic operations are offloaded,… |
| 1.3.6.1.4.1.3375.2.1.1.2.9.17 | ScalarsysClientsslStatPartiallyHwAcceleratedConns | read-only | current | Partially hardware-accelerated indicates that at least the RSA decryptions are offloaded. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.18 | ScalarsysClientsslStatNonHwAcceleratedConns | read-only | current | Non-accelerated connections are those for which no steady-state hardware acceleration is available (either because no hardware accelerators are available or be… |
| 1.3.6.1.4.1.3375.2.1.1.2.9.19 | ScalarsysClientsslStatPrematureDisconnects | read-only | current | The number of connections disconnected before SSL session establishment: the total number of connections that were prematurely closed before an SSL session was… |
| 1.3.6.1.4.1.3375.2.1.1.2.9.20 | ScalarsysClientsslStatMidstreamRenegotiations | read-only | current | The number of mid-stream SSL re-negotiations, not including initial SSL session establishment. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.21 | ScalarsysClientsslStatSessCacheCurEntries | read-only | current | The number of the current entries in this cache. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.22 | ScalarsysClientsslStatSessCacheHits | read-only | current | The total number of the cache hits. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.23 | ScalarsysClientsslStatSessCacheLookups | read-only | current | The total number of the cache lookups. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.24 | ScalarsysClientsslStatSessCacheOverflows | read-only | current | The total number of the cache overflows. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.25 | ScalarsysClientsslStatSessCacheInvalidations | read-only | current | The total number of the session invalidations. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.26 | ScalarsysClientsslStatPeercertValid | read-only | current | The total number of the valid certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.27 | ScalarsysClientsslStatPeercertInvalid | read-only | current | The total number of the invalid certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.28 | ScalarsysClientsslStatPeercertNone | read-only | current | The total number of connections without certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.29 | ScalarsysClientsslStatHandshakeFailures | read-only | current | The total number of handshake failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.30 | ScalarsysClientsslStatBadRecords | read-only | current | The total number of the bad records. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.31 | ScalarsysClientsslStatFatalAlerts | read-only | current | The total number of the fatal alerts. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.32 | ScalarsysClientsslStatSslv2 | read-only | current | The SSL protocol version 2. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.33 | ScalarsysClientsslStatSslv3 | read-only | current | The SSL protocol version 3. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.34 | ScalarsysClientsslStatTlsv1 | read-only | current | The SSL TLS protocol version 1. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.35 | ScalarsysClientsslStatAdhKeyxchg | read-only | current | The anonymous Diffie-Hellman. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.36 | ScalarsysClientsslStatDhDssKeyxchg | read-only | deprecated | Deprecated! DSS certificate is obsolete in BIGIP. The diffie-Hellman w/ DSS certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.37 | ScalarsysClientsslStatDhRsaKeyxchg | read-only | current | The diffie-Hellman w/ RSA certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.38 | ScalarsysClientsslStatDssKeyxchg | read-only | deprecated | Deprecated! DSS certificate is obsolete in BIGIP. The DSS certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.39 | ScalarsysClientsslStatEdhDssKeyxchg | read-only | deprecated | Deprecated! DSS certificate is obsolete in BIGIP. The ephemeral Diffie-Hellman w/ DSS cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.40 | ScalarsysClientsslStatRsaKeyxchg | read-only | current | The RSA certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.41 | ScalarsysClientsslStatNullBulk | read-only | current | No encryption. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.42 | ScalarsysClientsslStatAesBulk | read-only | current | Advanced Encryption Standard (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.9.43 | ScalarsysClientsslStatDesBulk | read-only | current | Digital Encryption Standard (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.9.44 | ScalarsysClientsslStatIdeaBulk | read-only | current | IDEA (old SSLv2 cipher). |
| 1.3.6.1.4.1.3375.2.1.1.2.9.45 | ScalarsysClientsslStatRc2Bulk | read-only | current | Rivest Cipher 2 (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.9.46 | ScalarsysClientsslStatRc4Bulk | read-only | current | Rivest Cipher 4 (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.9.47 | ScalarsysClientsslStatNullDigest | read-only | current | No message authentication. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.48 | ScalarsysClientsslStatMd5Digest | read-only | current | Message Digest 5. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.49 | ScalarsysClientsslStatShaDigest | read-only | current | Secure Hash Algorithm. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.50 | ScalarsysClientsslStatNotssl | read-only | current | The total number of the bad client greetings. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.51 | ScalarsysClientsslStatEdhRsaKeyxchg | read-only | current | Ephemeral Diffie-Hellman w/ RSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.52 | ScalarsysClientsslStatTotConns5s | read-only | current | The average total SSL connections from client-side to the system in last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.53 | ScalarsysClientsslStatTotConns1m | read-only | current | The average total SSL connections from client-side to the system in last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.54 | ScalarsysClientsslStatTotConns5m | read-only | current | The average total SSL connections from client-side to the system in last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.55 | ScalarsysClientsslStatSecureHandshakes | read-only | current | The number of handshakes, including mid-stream re-negotiations, performed with peers supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.56 | ScalarsysClientsslStatInsecureHandshakeAccepts | read-only | current | The number of handshakes, including mid-stream re-negotiations, performed with peers not supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.57 | ScalarsysClientsslStatInsecureHandshakeRejects | read-only | current | The number of rejected initial handshakes with peers not supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.58 | ScalarsysClientsslStatInsecureRenegotiationRejects | read-only | current | The number of rejected renegotiation attempts by peers not supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.59 | ScalarsysClientsslStatSniRejects | read-only | current | The number of rejected handshake attempts by peers not supporting SSL SNI extension or having mismatched server names. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.60 | ScalarsysClientsslStatTlsv11 | read-only | current | The SSL TLS protocol version 1.1. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.61 | ScalarsysClientsslStatTlsv12 | read-only | current | The SSL TLS protocol version 1.2. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.62 | ScalarsysClientsslStatDtlsv1 | read-only | current | The SSL DTLS protocol version 1.0. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.63 | ScalarsysClientsslStatEcdheRsaKeyxchg | read-only | current | Ephemeral ECDH w/ RSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.64 | ScalarsysClientsslStatConns | read-only | current | The total connections using SSL FWDP feature. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.65 | ScalarsysClientsslStatCachedCerts | read-only | current | The total SSL FWDP cached certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.66 | ScalarsysClientsslStatEcdhRsaKeyxchg | read-only | current | Fixed ECDH with RSA signed cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.67 | ScalarsysClientsslStatEcdheEcdsaKeyxchg | read-only | current | Ephemeral ECDH with ECDSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.68 | ScalarsysClientsslStatEcdhEcdsaKeyxchg | read-only | current | Fixed ECDH with ECDSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.69 | ScalarsysClientsslStatDheDssKeyxchg | read-only | current | Ephemeral DH with DSS cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.70 | ScalarsysClientsslStatAesGcmBulk | read-only | current | Advanced Encryption Standard Galois Counter Mode (AES-GCM). |
| 1.3.6.1.4.1.3375.2.1.1.2.9.71 | ScalarsysClientsslStatDestinationIpBypasses | read-only | current | The total SSL FWDP Destination IP Bypasses. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.72 | ScalarsysClientsslStatSourceIpBypasses | read-only | current | The total SSL FWDP Source IP Bypasses. |
| 1.3.6.1.4.1.3375.2.1.1.2.9.73 | ScalarsysClientsslStatHostnameBypasses | read-only | current | The total SSL FWDP Hostname Bypasses. |
| 1.3.6.1.4.1.3375.2.1.1.2.10 | NodesysGlobalServerSslStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.10.1 | ScalarsysServersslStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalServerSslStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not… |
| 1.3.6.1.4.1.3375.2.1.1.2.10.2 | ScalarsysServersslStatCurConns | read-only | current | The current number of concurrent connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.3 | ScalarsysServersslStatMaxConns | read-only | current | The maximum number of concurrent connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.4 | ScalarsysServersslStatCurNativeConns | read-only | current | The current number of concurrent native connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.5 | ScalarsysServersslStatMaxNativeConns | read-only | current | The maximum number of concurrent native connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.6 | ScalarsysServersslStatTotNativeConns | read-only | current | The total number of concurrent native connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.7 | ScalarsysServersslStatCurCompatConns | read-only | current | The current number of concurrent compat connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.8 | ScalarsysServersslStatMaxCompatConns | read-only | current | The maximum number of concurrent compat connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.9 | ScalarsysServersslStatTotCompatConns | read-only | current | The total number of concurrent compat connections with established SSL sessions being maintained by the filter. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.10 | ScalarsysServersslStatEncryptedBytesIn | read-only | current | The total encrypted bytes received. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.11 | ScalarsysServersslStatEncryptedBytesOut | read-only | current | The total encrypted bytes sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.12 | ScalarsysServersslStatDecryptedBytesIn | read-only | current | The total decrypted bytes received. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.13 | ScalarsysServersslStatDecryptedBytesOut | read-only | current | The total decrypted bytes sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.14 | ScalarsysServersslStatRecordsIn | read-only | current | The total records received. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.15 | ScalarsysServersslStatRecordsOut | read-only | current | The total records sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.16 | ScalarsysServersslStatFullyHwAcceleratedConns | read-only | current | Fully hardware-accelerated implies usage of the Cavium Nitrox or similar hardware accelerator such that all significant cryptographic operations are offloaded,… |
| 1.3.6.1.4.1.3375.2.1.1.2.10.17 | ScalarsysServersslStatPartiallyHwAcceleratedConns | read-only | current | Partially hardware-accelerated indicates that at least the RSA decryptions are offloaded. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.18 | ScalarsysServersslStatNonHwAcceleratedConns | read-only | current | Non-accelerated connections are those for which no steady-state hardware acceleration is available (either because no hardware accelerators are available or be… |
| 1.3.6.1.4.1.3375.2.1.1.2.10.19 | ScalarsysServersslStatPrematureDisconnects | read-only | current | The number of connections disconnected before SSL session establishment: the total number of connections that were prematurely closed before an SSL session was… |
| 1.3.6.1.4.1.3375.2.1.1.2.10.20 | ScalarsysServersslStatMidstreamRenegotiations | read-only | current | The number of mid-stream SSL re-negotiations, not including initial SSL session establishment. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.21 | ScalarsysServersslStatSessCacheCurEntries | read-only | current | The number of the current entries in this cache. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.22 | ScalarsysServersslStatSessCacheHits | read-only | current | The total number of the cache hits. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.23 | ScalarsysServersslStatSessCacheLookups | read-only | current | The total number of the cache lookups. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.24 | ScalarsysServersslStatSessCacheOverflows | read-only | current | The total number of the cache overflows. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.25 | ScalarsysServersslStatSessCacheInvalidations | read-only | current | The total number of the session invalidations. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.26 | ScalarsysServersslStatPeercertValid | read-only | current | The total number of the valid certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.27 | ScalarsysServersslStatPeercertInvalid | read-only | current | The total number of the invalid certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.28 | ScalarsysServersslStatPeercertNone | read-only | current | The total number of connections without certificates. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.29 | ScalarsysServersslStatHandshakeFailures | read-only | current | The total number of handshake failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.30 | ScalarsysServersslStatBadRecords | read-only | current | The total number of the bad records. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.31 | ScalarsysServersslStatFatalAlerts | read-only | current | The total number of the fatal alerts. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.32 | ScalarsysServersslStatSslv2 | read-only | current | The SSL protocol version 2. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.33 | ScalarsysServersslStatSslv3 | read-only | current | The SSL protocol version 3. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.34 | ScalarsysServersslStatTlsv1 | read-only | current | The SSL TLS protocol version 1. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.35 | ScalarsysServersslStatAdhKeyxchg | read-only | current | The anonymous Diffie-Hellman. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.36 | ScalarsysServersslStatDhDssKeyxchg | read-only | deprecated | Deprecated! DSS certificate is obsolete in BIGIP. The diffie-Hellman w/ DSS certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.37 | ScalarsysServersslStatDhRsaKeyxchg | read-only | current | The diffie-Hellman w/ RSA certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.38 | ScalarsysServersslStatDssKeyxchg | read-only | deprecated | Deprecated! DSS certificate is obsolete in BIGIP. The DSS certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.39 | ScalarsysServersslStatEdhDssKeyxchg | read-only | deprecated | Deprecated! DSS certificate is obsolete in BIGIP. The ephemeral Diffie-Hellman w/ DSS cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.40 | ScalarsysServersslStatRsaKeyxchg | read-only | current | The RSA certificate. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.41 | ScalarsysServersslStatNullBulk | read-only | current | No encryption. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.42 | ScalarsysServersslStatAesBulk | read-only | current | Advanced Encryption Standard (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.10.43 | ScalarsysServersslStatDesBulk | read-only | current | Digital Encryption Standard (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.10.44 | ScalarsysServersslStatIdeaBulk | read-only | current | IDEA (old SSLv2 cipher). |
| 1.3.6.1.4.1.3375.2.1.1.2.10.45 | ScalarsysServersslStatRc2Bulk | read-only | current | Rivest Cipher 2 (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.10.46 | ScalarsysServersslStatRc4Bulk | read-only | current | Rivest Cipher 4 (CBC). |
| 1.3.6.1.4.1.3375.2.1.1.2.10.47 | ScalarsysServersslStatNullDigest | read-only | current | No message authentication. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.48 | ScalarsysServersslStatMd5Digest | read-only | current | Message Digest 5. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.49 | ScalarsysServersslStatShaDigest | read-only | current | Secure Hash Algorithm. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.50 | ScalarsysServersslStatNotssl | read-only | current | The total number of the bad client greetings. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.51 | ScalarsysServersslStatEdhRsaKeyxchg | read-only | current | Ephemeral Diffie-Hellman w/ RSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.52 | ScalarsysServersslStatSecureHandshakes | read-only | current | The number of handshakes, including mid-stream re-negotiations, performed with peers supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.53 | ScalarsysServersslStatInsecureHandshakeAccepts | read-only | current | The number of handshakes, including mid-stream re-negotiations, performed with peers not supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.54 | ScalarsysServersslStatInsecureHandshakeRejects | read-only | current | The number of rejected initial handshakes with peers not supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.55 | ScalarsysServersslStatInsecureRenegotiationRejects | read-only | current | The number of rejected renegotiation attempts by peers not supporting SSL secure renegotiation. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.56 | ScalarsysServersslStatSniRejects | read-only | current | The number of rejected handshake attempts by peers not supporting SSL SNI extension or having mismatched server names. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.57 | ScalarsysServersslStatTlsv11 | read-only | current | The SSL TLS protocol version 1.1. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.58 | ScalarsysServersslStatTlsv12 | read-only | current | The SSL TLS protocol version 1.2. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.59 | ScalarsysServersslStatDtlsv1 | read-only | current | The SSL DTLS protocol version 1.0. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.60 | ScalarsysServersslStatEcdheRsaKeyxchg | read-only | current | Ephemeral ECDH w/ RSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.61 | ScalarsysServersslStatConns | read-only | current | The total connections using SSL FWDP feature. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.62 | ScalarsysServersslStatEcdhRsaKeyxchg | read-only | current | Fixed ECDH with RSA signed cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.63 | ScalarsysServersslStatEcdheEcdsaKeyxchg | read-only | current | Ephemeral ECDH with ECDSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.64 | ScalarsysServersslStatEcdhEcdsaKeyxchg | read-only | current | Fixed ECDH with ECDSA cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.65 | ScalarsysServersslStatDheDssKeyxchg | read-only | current | Ephemeral DH with DSS cert. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.66 | ScalarsysServersslStatAesGcmBulk | read-only | current | Advanced Encryption Standard Galois Counter Mode (AES-GCM). |
| 1.3.6.1.4.1.3375.2.1.1.2.10.67 | ScalarsysServersslStatDestinationIpBypasses | read-only | current | The total SSL FWDP Destination IP Bypasses. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.68 | ScalarsysServersslStatSourceIpBypasses | read-only | current | The total SSL FWDP Source IP Bypasses. |
| 1.3.6.1.4.1.3375.2.1.1.2.10.69 | ScalarsysServersslStatHostnameBypasses | read-only | current | The total SSL FWDP Hostname Bypasses. |
| 1.3.6.1.4.1.3375.2.1.1.2.11 | NodesysGlobalStreamStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.11.1 | ScalarsysStreamStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalStreamStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be… |
| 1.3.6.1.4.1.3375.2.1.1.2.11.2 | ScalarsysStreamStatReplaces | read-only | current | The number of replace operations completed on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.12 | NodesysGlobalTcpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.12.1 | ScalarsysTcpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalTcpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.12.2 | ScalarsysTcpStatOpen | read-only | current | The number of current open connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.3 | ScalarsysTcpStatCloseWait | read-only | current | The number of current connections in CLOSE-WAIT/LAST-ACK. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.4 | ScalarsysTcpStatFinWait | read-only | current | The number of current connections in FIN-WAIT/CLOSING. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.5 | ScalarsysTcpStatTimeWait | read-only | current | The number of current connections in TIME-WAIT. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.6 | ScalarsysTcpStatAccepts | read-only | current | The number of connections accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.7 | ScalarsysTcpStatAcceptfails | read-only | current | The number of connections not accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.8 | ScalarsysTcpStatConnects | read-only | current | The number of connections established. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.9 | ScalarsysTcpStatConnfails | read-only | current | The number of connections failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.10 | ScalarsysTcpStatExpires | read-only | current | The number of connections expired due to idle timeout. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.11 | ScalarsysTcpStatAbandons | read-only | current | The number of connections abandoned connections due to retries/keep-alives. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.12 | ScalarsysTcpStatRxrst | read-only | current | The number of received RST. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.13 | ScalarsysTcpStatRxbadsum | read-only | current | The number of bad checksum. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.14 | ScalarsysTcpStatRxbadseg | read-only | current | The number of malformed segments. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.15 | ScalarsysTcpStatRxooseg | read-only | current | The number of out of order segments. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.16 | ScalarsysTcpStatRxcookie | read-only | current | The number of received SYN-cookies. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.17 | ScalarsysTcpStatRxbadcookie | read-only | current | The number of bad SYN-cookies. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.18 | ScalarsysTcpStatSyncacheover | read-only | current | The number of SYN-cache overflow. |
| 1.3.6.1.4.1.3375.2.1.1.2.12.19 | ScalarsysTcpStatTxrexmits | read-only | current | The number of retransmitted segments. |
| 1.3.6.1.4.1.3375.2.1.1.2.13 | NodesysGlobalUdpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.13.1 | ScalarsysUdpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalUdpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.13.2 | ScalarsysUdpStatOpen | read-only | current | The number of current open connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.3 | ScalarsysUdpStatAccepts | read-only | current | The number of connections accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.4 | ScalarsysUdpStatAcceptfails | read-only | current | The number of connections not accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.5 | ScalarsysUdpStatConnects | read-only | current | The number of connections established. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.6 | ScalarsysUdpStatConnfails | read-only | current | The number of connections failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.7 | ScalarsysUdpStatExpires | read-only | current | The number of connections expired connections due to idle timeout. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.8 | ScalarsysUdpStatRxdgram | read-only | current | The number of received datagrams. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.9 | ScalarsysUdpStatRxbaddgram | read-only | current | The number of malformed datagrams. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.10 | ScalarsysUdpStatRxunreach | read-only | current | The number of received ICMP un-reached. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.11 | ScalarsysUdpStatRxbadsum | read-only | current | The number of bad checksum. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.12 | ScalarsysUdpStatRxnosum | read-only | current | The number of no checksum. |
| 1.3.6.1.4.1.3375.2.1.1.2.13.13 | ScalarsysUdpStatTxdgram | read-only | current | The number of transmitted datagrams. |
| 1.3.6.1.4.1.3375.2.1.1.2.14 | NodesysGlobalFastHttpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.14.1 | ScalarsysFastHttpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalFastHttpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not … |
| 1.3.6.1.4.1.3375.2.1.1.2.14.2 | ScalarsysFastHttpStatClientSyns | read-only | current | The total number of client SYN cookies generated. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.3 | ScalarsysFastHttpStatClientAccepts | read-only | current | The total number of client TCP accepts. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.4 | ScalarsysFastHttpStatServerConnects | read-only | current | The total number of server TCP connects. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.5 | ScalarsysFastHttpStatConnpoolCurSize | read-only | current | The number of available server-side flows in the reuse pools. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.6 | ScalarsysFastHttpStatConnpoolMaxSize | read-only | current | The maximum number of available server-side flows in the reuse pools. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.7 | ScalarsysFastHttpStatConnpoolReuses | read-only | current | The number of times a server-side flow was reused from the pools. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.8 | ScalarsysFastHttpStatConnpoolExhausted | read-only | current | The number of times the reuse pools was exhausted. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.9 | ScalarsysFastHttpStatNumberReqs | read-only | current | The total number of http requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.10 | ScalarsysFastHttpStatUnbufferedReqs | read-only | current | The total number of un-buffered requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.11 | ScalarsysFastHttpStatGetReqs | read-only | current | The total number of get requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.12 | ScalarsysFastHttpStatPostReqs | read-only | current | The total number of post requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.13 | ScalarsysFastHttpStatV9Reqs | read-only | current | The total number of version 9 requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.14 | ScalarsysFastHttpStatV10Reqs | read-only | current | The total number of version 10 requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.15 | ScalarsysFastHttpStatV11Reqs | read-only | current | The total number of version 11 requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.16 | ScalarsysFastHttpStatResp2xxCnt | read-only | current | The number of server-side responses in range of 200 to 206 (successful responses). |
| 1.3.6.1.4.1.3375.2.1.1.2.14.17 | ScalarsysFastHttpStatResp3xxCnt | read-only | current | The number of server-side responses in range of 300 to 307 (redirection responses). |
| 1.3.6.1.4.1.3375.2.1.1.2.14.18 | ScalarsysFastHttpStatResp4xxCnt | read-only | current | The number of server-side responses in range of 400 to 417 (client errors). |
| 1.3.6.1.4.1.3375.2.1.1.2.14.19 | ScalarsysFastHttpStatResp5xxCnt | read-only | current | The number of server-side responses in range of 500 to 505 (server errors). |
| 1.3.6.1.4.1.3375.2.1.1.2.14.20 | ScalarsysFastHttpStatReqParseErrors | read-only | current | The number of request parse errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.21 | ScalarsysFastHttpStatRespParseErrors | read-only | current | The number of response parse errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.22 | ScalarsysFastHttpStatClientRxBad | read-only | current | The number of bad TCP segments dropped from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.23 | ScalarsysFastHttpStatServerRxBad | read-only | current | The number of bad TCP segments dropped from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.14.24 | ScalarsysFastHttpStatPipelinedReqs | read-only | current | The number of pipelined HTTP requests detected. |
| 1.3.6.1.4.1.3375.2.1.1.2.15 | NodesysGlobalXmlStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.15.1 | ScalarsysXmlStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalXmlStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.15.2 | ScalarsysXmlStatNumErrors | read-only | deprecated | Deprecated! The total number of XML parsing errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.16 | NodesysGlobalIiopStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.16.1 | ScalarsysIiopStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalIiopStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.16.2 | ScalarsysIiopStatNumRequests | read-only | current | The total number of IIOP requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.16.3 | ScalarsysIiopStatNumResponses | read-only | current | The total number of IIOP responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.16.4 | ScalarsysIiopStatNumCancels | read-only | current | The total number of IIOP cancel messages. |
| 1.3.6.1.4.1.3375.2.1.1.2.16.5 | ScalarsysIiopStatNumErrors | read-only | current | The total number of IIOP error messages. |
| 1.3.6.1.4.1.3375.2.1.1.2.16.6 | ScalarsysIiopStatNumFragments | read-only | current | The total number of IIOP fragments. |
| 1.3.6.1.4.1.3375.2.1.1.2.17 | NodesysGlobalRtspStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.17.1 | ScalarsysRtspStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalRtspStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.17.2 | ScalarsysRtspStatNumRequests | read-only | current | The total number of RTSP requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.17.3 | ScalarsysRtspStatNumResponses | read-only | current | The total number of RTSP responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.17.4 | ScalarsysRtspStatNumErrors | read-only | current | The total number of RTSP errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.17.5 | ScalarsysRtspStatNumInterleavedData | read-only | current | The total number of interleaved RTSP data packets. |
| 1.3.6.1.4.1.3375.2.1.1.2.18 | NodesysGlobalSctpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.18.1 | ScalarsysSctpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalSctpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.18.2 | ScalarsysSctpStatAccepts | read-only | current | The total number of accepted connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.3 | ScalarsysSctpStatAcceptfails | read-only | current | The total number of not accepted responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.4 | ScalarsysSctpStatConnects | read-only | current | The total number of established connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.5 | ScalarsysSctpStatConnfails | read-only | current | The total number of connections failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.6 | ScalarsysSctpStatExpires | read-only | current | The total number of expired connections due to idle timeout. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.7 | ScalarsysSctpStatAbandons | read-only | current | The total number of abandoned connections due to retries/keep-alives. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.8 | ScalarsysSctpStatRxrst | read-only | current | The total number of received Abort chunks. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.9 | ScalarsysSctpStatRxbadsum | read-only | current | The total number of bad checksum in received packets. |
| 1.3.6.1.4.1.3375.2.1.1.2.18.10 | ScalarsysSctpStatRxcookie | read-only | current | The total number of received SCTP cookies (including bad and good ones). |
| 1.3.6.1.4.1.3375.2.1.1.2.18.11 | ScalarsysSctpStatRxbadcookie | read-only | current | The total number of received bad SCTP cookies. |
| 1.3.6.1.4.1.3375.2.1.1.2.19 | NodesysGlobalFastL4Stat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.19.1 | ScalarsysFastL4StatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalFastL4Stat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be… |
| 1.3.6.1.4.1.3375.2.1.1.2.19.2 | ScalarsysFastL4StatOpen | read-only | current | The total number of current open connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.3 | ScalarsysFastL4StatAccepts | read-only | current | The total number of accepted connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.4 | ScalarsysFastL4StatAcceptfails | read-only | current | The total number of not accepted connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.5 | ScalarsysFastL4StatExpires | read-only | current | The total number of expired connections due to idle timeout. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.6 | ScalarsysFastL4StatRxbadpkt | read-only | current | The total number of malformed packets. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.7 | ScalarsysFastL4StatRxunreach | read-only | current | The total number of received ICMP unreach/TCP RST. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.8 | ScalarsysFastL4StatRxbadunreach | read-only | current | The total number of received TCP RST outside the current window. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.9 | ScalarsysFastL4StatRxbadsum | read-only | current | The total number of bad checksum. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.10 | ScalarsysFastL4StatTxerrors | read-only | current | The total number of transmit datagram errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.11 | ScalarsysFastL4StatSyncookIssue | read-only | current | The total number of syncookies issued. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.12 | ScalarsysFastL4StatSyncookAccept | read-only | current | The total number of syncookies accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.13 | ScalarsysFastL4StatSyncookReject | read-only | current | The total number of syncookies rejected. |
| 1.3.6.1.4.1.3375.2.1.1.2.19.14 | ScalarsysFastL4StatServersynrtx | read-only | current | The total number of retransmissions of SYN to server for a syncookied connection. |
| 1.3.6.1.4.1.3375.2.1.1.2.20 | NodesysGlobalHost | |||
| 1.3.6.1.4.1.3375.2.1.1.2.20.1 | ScalarsysGlobalHostResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalHost. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset… |
| 1.3.6.1.4.1.3375.2.1.1.2.20.2 | ScalarsysGlobalHostMemTotal | read-only | current | The total host memory in bytes for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.3 | ScalarsysGlobalHostMemUsed | read-only | current | The host memory in bytes currently in use for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.4 | ScalarsysGlobalHostCpuCount | read-only | current | The number of CPUs in the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.5 | ScalarsysGlobalHostActiveCpuCount | read-only | current | The number of active CPUs in the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.6 | ScalarsysGlobalHostCpuUser | read-only | current | The average time spent by all processors in user context for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.7 | ScalarsysGlobalHostCpuNice | read-only | current | The average time spent by all processors running niced processes for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.8 | ScalarsysGlobalHostCpuSystem | read-only | current | The average time spent by all processors servicing system calls for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.9 | ScalarsysGlobalHostCpuIdle | read-only | current | The average time spent by all processors doing nothing for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.10 | ScalarsysGlobalHostCpuIrq | read-only | current | The average time spent by all processors servicing hardware interrupts for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.11 | ScalarsysGlobalHostCpuSoftirq | read-only | current | The average time spent by all processors servicing soft interrupts for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.12 | ScalarsysGlobalHostCpuIowait | read-only | current | The average time spent by all processors waiting for external I/O to complete for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.13 | ScalarsysGlobalHostCpuUsageRatio | read-only | current | This is usage ratio of CPU for the system. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas of user, niced, system, idle, irq, softir… |
| 1.3.6.1.4.1.3375.2.1.1.2.20.14 | ScalarsysGlobalHostCpuUser5s | read-only | current | The average time spent by the specified processor in user context for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.15 | ScalarsysGlobalHostCpuNice5s | read-only | current | The average time spent by the specified processor running niced processes for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.16 | ScalarsysGlobalHostCpuSystem5s | read-only | current | The average time spent by the specified processor servicing system calls for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.17 | ScalarsysGlobalHostCpuIdle5s | read-only | current | The average time spent by the specified processor doing nothing for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.18 | ScalarsysGlobalHostCpuIrq5s | read-only | current | The average time spent by the specified processor servicing hardware interrupts for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.19 | ScalarsysGlobalHostCpuSoftirq5s | read-only | current | The average time spent by the specified processor servicing soft interrupts for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.20 | ScalarsysGlobalHostCpuIowait5s | read-only | current | The average time spent by the specified processor waiting for external I/O to complete for the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.21 | ScalarsysGlobalHostCpuUsageRatio5s | read-only | current | This is average usage ratio of CPU for the system in the last five seconds. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas of user,… |
| 1.3.6.1.4.1.3375.2.1.1.2.20.22 | ScalarsysGlobalHostCpuUser1m | read-only | current | The average time spent by the specified processor in user context for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.23 | ScalarsysGlobalHostCpuNice1m | read-only | current | The average time spent by the specified processor running niced processes for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.24 | ScalarsysGlobalHostCpuSystem1m | read-only | current | The average time spent by the specified processor servicing system calls for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.25 | ScalarsysGlobalHostCpuIdle1m | read-only | current | The average time spent by the specified processor doing nothing for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.26 | ScalarsysGlobalHostCpuIrq1m | read-only | current | The average time spent by the specified processor servicing hardware interrupts for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.27 | ScalarsysGlobalHostCpuSoftirq1m | read-only | current | The average time spent by the specified processor servicing soft interrupts for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.28 | ScalarsysGlobalHostCpuIowait1m | read-only | current | The average time spent by the specified processor waiting for external I/O to complete for the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.29 | ScalarsysGlobalHostCpuUsageRatio1m | read-only | current | This is average usage ratio of CPU for the system in the last one minute. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas of user, n… |
| 1.3.6.1.4.1.3375.2.1.1.2.20.30 | ScalarsysGlobalHostCpuUser5m | read-only | current | The average time spent by the specified processor in user context for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.31 | ScalarsysGlobalHostCpuNice5m | read-only | current | The average time spent by the specified processor running niced processes for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.32 | ScalarsysGlobalHostCpuSystem5m | read-only | current | The average time spent by the specified processor servicing system calls for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.33 | ScalarsysGlobalHostCpuIdle5m | read-only | current | The average time spent by the specified processor doing nothing for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.34 | ScalarsysGlobalHostCpuIrq5m | read-only | current | The average time spent by the specified processor servicing hardware interrupts for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.35 | ScalarsysGlobalHostCpuSoftirq5m | read-only | current | The average time spent by the specified processor servicing soft interrupts for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.36 | ScalarsysGlobalHostCpuIowait5m | read-only | current | The average time spent by the specified processor waiting for external I/O to complete for the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.37 | ScalarsysGlobalHostCpuUsageRatio5m | read-only | current | This is average usage ratio of CPU for the system in the last five minutes. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas of user,… |
| 1.3.6.1.4.1.3375.2.1.1.2.20.38 | ScalarsysGlobalHostCpuStolen | read-only | current | The time 'stolen' from the system (for virtual machines). |
| 1.3.6.1.4.1.3375.2.1.1.2.20.39 | ScalarsysGlobalHostCpuStolen5s | read-only | current | The average time 'stolen' from the system in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.40 | ScalarsysGlobalHostCpuStolen1m | read-only | current | The average time 'stolen' from the system in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.41 | ScalarsysGlobalHostCpuStolen5m | read-only | current | The average time 'stolen' from the system in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.42 | ScalarsysGlobalHostMemTotalKb | read-only | current | The total host memory in Kilobytes for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.20.43 | ScalarsysGlobalHostMemUsedKb | read-only | current | The host memory in Kilobytes currently in use for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21 | NodesysGlobalTmmStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.21.1 | ScalarsysGlobalTmmStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalTmmStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.21.2 | ScalarsysGlobalTmmStatNpus | read-only | current | The number of TMMs (Traffic Management Module) on the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.3 | ScalarsysGlobalTmmStatClientPktsIn | read-only | current | The number of packets received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.4 | ScalarsysGlobalTmmStatClientBytesIn | read-only | current | The number of bytes received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.5 | ScalarsysGlobalTmmStatClientPktsOut | read-only | current | The number of packets sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.6 | ScalarsysGlobalTmmStatClientBytesOut | read-only | current | The number of bytes sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.7 | ScalarsysGlobalTmmStatClientMaxConns | read-only | current | The maximum connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.8 | ScalarsysGlobalTmmStatClientTotConns | read-only | current | The total connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.9 | ScalarsysGlobalTmmStatClientCurConns | read-only | current | The current connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.10 | ScalarsysGlobalTmmStatServerPktsIn | read-only | current | The number of packets received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.11 | ScalarsysGlobalTmmStatServerBytesIn | read-only | current | The number of bytes received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.12 | ScalarsysGlobalTmmStatServerPktsOut | read-only | current | The number of packets sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.13 | ScalarsysGlobalTmmStatServerBytesOut | read-only | current | The number of bytes sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.14 | ScalarsysGlobalTmmStatServerMaxConns | read-only | current | The maximum connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.15 | ScalarsysGlobalTmmStatServerTotConns | read-only | current | The total connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.16 | ScalarsysGlobalTmmStatServerCurConns | read-only | current | The current connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.17 | ScalarsysGlobalTmmStatMaintenanceModeDeny | read-only | current | The connection requests rejected because the virtual server was in maintenance mode. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.18 | ScalarsysGlobalTmmStatMaxConnVirtualAddrDeny | read-only | current | The connection requests rejected because they exceeded the connection limit for a virtual server address. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.19 | ScalarsysGlobalTmmStatMaxConnVirtualPathDeny | read-only | current | The connection requests rejected because they exceeded the connection limit for a virtual server (IP:port). |
| 1.3.6.1.4.1.3375.2.1.1.2.21.20 | ScalarsysGlobalTmmStatVirtualServerNonSynDeny | read-only | current | The packets that are not connection requests and are destined for a virtual server that has no connection for the client address. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.21 | ScalarsysGlobalTmmStatNoHandlerDeny | read-only | current | The incoming packets that could not be processed by a virtual server, NAT, or SNAT. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.22 | ScalarsysGlobalTmmStatLicenseDeny | read-only | current | The packets which were dropped due to exceeding licensing limitations. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.23 | ScalarsysGlobalTmmStatCmpConnRedirected | read-only | current | The connections that were redirected to a different TMM in the cluster. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.24 | ScalarsysGlobalTmmStatConnectionMemoryErrors | read-only | current | The connections could not be created because memory was not available. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.25 | ScalarsysGlobalTmmStatTmTotalCycles | read-only | deprecated | Deprecated! Please use the provided tmm usage ratios. Traffic management CPU usage. The total cycles spent in traffic management. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.26 | ScalarsysGlobalTmmStatTmIdleCycles | read-only | deprecated | Deprecated! Please use the provided tmm usage ratios. Traffic management CPU usage. The cycles spent polling with no traffic. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.27 | ScalarsysGlobalTmmStatTmSleepCycles | read-only | deprecated | Deprecated! Please use the provided tmm usage ratios. Traffic management CPU usage. The cycles yielded. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.28 | ScalarsysGlobalTmmStatMemoryTotal | read-only | current | The total memory available in bytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.21.29 | ScalarsysGlobalTmmStatMemoryUsed | read-only | current | The memory in use in bytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.21.30 | ScalarsysGlobalTmmStatDroppedPackets | read-only | current | The total dropped packets. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.31 | ScalarsysGlobalTmmStatIncomingPacketErrors | read-only | current | The total incoming packet errors for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.32 | ScalarsysGlobalTmmStatOutgoingPacketErrors | read-only | current | The total outgoing packet errors for the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.33 | ScalarsysGlobalTmmStatHttpRequests | read-only | current | The total number of HTTP requests to the system. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.34 | ScalarsysGlobalTmmStatTmUsageRatio5s | read-only | current | The percentage of time all TMMs were busy over the last 5 seconds. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.35 | ScalarsysGlobalTmmStatTmUsageRatio1m | read-only | current | The percentage of time all TMMs were busy over the last 1 minute. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.36 | ScalarsysGlobalTmmStatTmUsageRatio5m | read-only | current | The percentage of time all TMMs were busy over the last 5 minutes. |
| 1.3.6.1.4.1.3375.2.1.1.2.21.37 | ScalarsysGlobalTmmStatMemoryTotalKb | read-only | current | The total memory available in Kilobytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.21.38 | ScalarsysGlobalTmmStatMemoryUsedKb | read-only | current | The memory in use in Kilobytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.1.2.22 | NodesysGlobalHttpCompressionStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.22.1 | ScalarsysHttpCompressionStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalHttpCompressionStat. Setting this value to 1 will reset statistics data. Note, some statistics data m… |
| 1.3.6.1.4.1.3375.2.1.1.2.22.2 | ScalarsysHttpCompressionStatPrecompressBytes | read-only | current | The number of response bytes before compression has taken place. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.3 | ScalarsysHttpCompressionStatPostcompressBytes | read-only | current | The number of response bytes after compression has taken place. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.4 | ScalarsysHttpCompressionStatNullCompressBytes | read-only | current | The number of bytes subjected to NULL compression (for license enforcement). |
| 1.3.6.1.4.1.3375.2.1.1.2.22.5 | ScalarsysHttpCompressionStatHtmlPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: HTML. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.6 | ScalarsysHttpCompressionStatHtmlPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: HTML. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.7 | ScalarsysHttpCompressionStatCssPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: CSS. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.8 | ScalarsysHttpCompressionStatCssPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: CSS. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.9 | ScalarsysHttpCompressionStatJsPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: Javascript. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.10 | ScalarsysHttpCompressionStatJsPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: Javascript. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.11 | ScalarsysHttpCompressionStatXmlPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: XML. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.12 | ScalarsysHttpCompressionStatXmlPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: XML. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.13 | ScalarsysHttpCompressionStatSgmlPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: SGML. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.14 | ScalarsysHttpCompressionStatSgmlPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: SGML. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.15 | ScalarsysHttpCompressionStatPlainPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: Plain. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.16 | ScalarsysHttpCompressionStatPlainPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: Plain. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.17 | ScalarsysHttpCompressionStatOctetPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: Octet stream. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.18 | ScalarsysHttpCompressionStatOctetPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: Octet stream. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.19 | ScalarsysHttpCompressionStatImagePrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: Images. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.20 | ScalarsysHttpCompressionStatImagePostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: Images. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.21 | ScalarsysHttpCompressionStatVideoPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: Video files. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.22 | ScalarsysHttpCompressionStatVideoPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: Video files. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.23 | ScalarsysHttpCompressionStatAudioPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.24 | ScalarsysHttpCompressionStatAudioPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.25 | ScalarsysHttpCompressionStatOtherPrecompressBytes | read-only | current | The number of pre-compressed bytes for the MIME-Types: other than HTML, CSS, Javascript, XML, SGML, Plain, Images, Video files, Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.22.26 | ScalarsysHttpCompressionStatOtherPostcompressBytes | read-only | current | The number of post-compressed bytes for the MIME-Types: other than HTML, CSS, Javascript, XML, SGML, Plain, Images, Video files, Audio files. |
| 1.3.6.1.4.1.3375.2.1.1.2.23 | NodesysGlobalWebAccelerationStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.23.1 | ScalarsysWebAccelerationStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalWebAccelerationStat. Setting this value to 1 will reset statistics data. Note, some statistics data m… |
| 1.3.6.1.4.1.3375.2.1.1.2.23.2 | ScalarsysWebAccelerationStatCacheHits | read-only | current | The number of cache hits. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.3 | ScalarsysWebAccelerationStatCacheMisses | read-only | current | The number of cache misses, excluding un-cacheable data. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.4 | ScalarsysWebAccelerationStatCacheMissesAll | read-only | current | The total number of cache misses. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.5 | ScalarsysWebAccelerationStatCacheHitBytes | read-only | current | The number of cache hits in bytes. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.6 | ScalarsysWebAccelerationStatCacheMissBytes | read-only | current | The number of cache misses in bytes, excluding un-cacheable data. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.7 | ScalarsysWebAccelerationStatCacheMissBytesAll | read-only | current | The total number of cache misses in bytes. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.8 | ScalarsysWebAccelerationStatCacheSize | read-only | current | The current cache size (in bytes). |
| 1.3.6.1.4.1.3375.2.1.1.2.23.9 | ScalarsysWebAccelerationStatCacheCount | read-only | current | The number of items stored in cache. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.10 | ScalarsysWebAccelerationStatCacheEvictions | read-only | current | The number of cache evictions. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.11 | ScalarsysWebAccelerationStatInterStripeHits | read-only | current | The number of inter-stripe cache hits. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.12 | ScalarsysWebAccelerationStatInterStripeMisses | read-only | current | The number of inter-stripe cache misses. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.13 | ScalarsysWebAccelerationStatInterStripeHitBytes | read-only | current | The number of inter-stripe cache hits in bytes. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.14 | ScalarsysWebAccelerationStatInterStripeSize | read-only | current | The current inter-stripe cache size (in bytes). |
| 1.3.6.1.4.1.3375.2.1.1.2.23.15 | ScalarsysWebAccelerationStatInterStripeCount | read-only | current | The number of items stored in inter-stripe cache. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.16 | ScalarsysWebAccelerationStatInterStripeEvictions | read-only | current | The number of inter-stripe cache evictions. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.17 | ScalarsysWebAccelerationStatRemoteHits | read-only | current | The number of remote cache hits. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.18 | ScalarsysWebAccelerationStatRemoteMisses | read-only | current | The number of remote cache misses. |
| 1.3.6.1.4.1.3375.2.1.1.2.23.19 | ScalarsysWebAccelerationStatRemoteHitBytes | read-only | current | The number of remote cache hits in bytes. |
| 1.3.6.1.4.1.3375.2.1.1.2.24 | NodesysGlobalDnsStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.24.1 | ScalarsysDnsStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalDnsStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.24.2 | ScalarsysDnsStatQueries | read-only | current | The total number of DNS queries. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.3 | ScalarsysDnsStatResponses | read-only | current | The total number of DNS responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.4 | ScalarsysDnsStatResponsesPerSec | read-only | current | The average number of DNS responses per second. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.5 | ScalarsysDnsStatToGtm | read-only | current | The number of requests sent to GTM. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.6 | ScalarsysDnsStatDnsExpressReqs | read-only | current | The number of DNS Express requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.7 | ScalarsysDnsStatDnsExpressNotifies | read-only | current | The number of DNS Express notifies. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.8 | ScalarsysDnsStatToCache | read-only | current | The number of requests sent to the DNS cache. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.9 | ScalarsysDnsStatToDns | read-only | current | The number of requests sent to backend DNS. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.10 | ScalarsysDnsStatDns64Reqs | read-only | current | The number of A requests the system generated and sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.11 | ScalarsysDnsStatDns64Rewrites | read-only | current | The number of A responses translated to AAAA. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.12 | ScalarsysDnsStatDns64Failures | read-only | current | The number of unsuccessful AAAA requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.13 | ScalarsysDnsStatHints | read-only | current | The number of hint (Root Nameservers) responses sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.14 | ScalarsysDnsStatRejects | read-only | current | The number of reject (REFUSED) responses sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.15 | ScalarsysDnsStatNoErrors | read-only | current | The number of NOERROR responses sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.16 | ScalarsysDnsStatDrops | read-only | current | The number of packets dropped (not sent to GTM, DNS-Express, DNSSEC, DNS64, or Backend DNS (e.g. BIND)). |
| 1.3.6.1.4.1.3375.2.1.1.2.24.17 | ScalarsysDnsStatMalformed | read-only | current | The number of malformed packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.18 | ScalarsysDnsStatTclSuspends | read-only | current | The number of TCL suspends. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.19 | ScalarsysDnsStatRecursionDesired | read-only | current | The number of queries with RD bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.20 | ScalarsysDnsStatCheckingDisabled | read-only | current | The number of queries with CD bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.21 | ScalarsysDnsStatEdns0 | read-only | current | The number of queries with EDNS0 bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.22 | ScalarsysDnsStatOpcodeQuery | read-only | current | The number of queries whose operation code is QUERY. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.23 | ScalarsysDnsStatOpcodeNotify | read-only | current | The number of queries whose operation code is NOTIFY. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.24 | ScalarsysDnsStatOpcodeUpdate | read-only | current | The number of queries whose operation code is UPDATE. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.25 | ScalarsysDnsStatZoneIxfr | read-only | current | The number of queries whose question type is IXFR. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.26 | ScalarsysDnsStatZoneAxfr | read-only | current | The number of queries whose question type is AXFR. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.27 | ScalarsysDnsStatAuthoritativeAnswer | read-only | current | The number of responses with AA bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.28 | ScalarsysDnsStatRecursionAvailable | read-only | current | The number of responses with RA bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.29 | ScalarsysDnsStatAuthenticatedData | read-only | current | The number of responses with AD bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.30 | ScalarsysDnsStatTruncated | read-only | current | The number of responses with TC bit set. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.31 | ScalarsysDnsStatRcodeNoerror | read-only | current | The number of responses whose return code is NOERROR. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.32 | ScalarsysDnsStatRcodeNxdomain | read-only | current | The number of responses whose return code is NXDOMAIN. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.33 | ScalarsysDnsStatRcodeServfail | read-only | current | The number of responses whose return code is SERVFAIL. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.34 | ScalarsysDnsStatRcodeRefused | read-only | current | The number of responses whose return code is REFUSED. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.35 | ScalarsysDnsStatMalicious | read-only | current | The number of malicious packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.36 | ScalarsysDnsStatAReqs | read-only | current | The number of A query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.37 | ScalarsysDnsStatAaaaReqs | read-only | current | The number of AAAA query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.38 | ScalarsysDnsStatAnyReqs | read-only | current | The number of ANY type query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.39 | ScalarsysDnsStatCnameReqs | read-only | current | The number of CNAME query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.40 | ScalarsysDnsStatMxReqs | read-only | current | The number of MX query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.41 | ScalarsysDnsStatNsReqs | read-only | current | The number of NS query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.42 | ScalarsysDnsStatPtrReqs | read-only | current | The number of PTR query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.43 | ScalarsysDnsStatSoaReqs | read-only | current | The number of SOA query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.44 | ScalarsysDnsStatSrvReqs | read-only | current | The number of SRV query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.45 | ScalarsysDnsStatTxtReqs | read-only | current | The number of TXT query packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.24.46 | ScalarsysDnsStatOtherReqs | read-only | current | The number of uncategorized DNS packets received. |
| 1.3.6.1.4.1.3375.2.1.1.2.25 | NodesysGlobalLsnPoolStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.25.1 | ScalarsysLsnPoolStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalLsnPoolStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not b… |
| 1.3.6.1.4.1.3375.2.1.1.2.25.2 | ScalarsysLsnPoolStatActivePersistenceMappings | read-only | current | The number of active persistence mappings. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.3 | ScalarsysLsnPoolStatActiveInboundReservations | read-only | current | The number of active inbound reservations. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.4 | ScalarsysLsnPoolStatTranslationRequests | read-only | current | The number of translation requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.5 | ScalarsysLsnPoolStatHairpinConnectionRequests | read-only | current | The number of hairpin connection requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.6 | ScalarsysLsnPoolStatActiveTranslations | read-only | current | The number of active translations. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.7 | ScalarsysLsnPoolStatActiveHairpinConnections | read-only | current | The number of active hairpin connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.8 | ScalarsysLsnPoolStatTranslationRequestFailures | read-only | current | The number of translation request failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.9 | ScalarsysLsnPoolStatPersistenceMappingFailures | read-only | current | The number of persistence mapping translation failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.10 | ScalarsysLsnPoolStatHairpinConnectionFailures | read-only | current | The number of failed hairpin connection attempts. A hairpin connection failure occurs when a subscriber connects to an inbound reservation but a connection cou… |
| 1.3.6.1.4.1.3375.2.1.1.2.25.11 | ScalarsysLsnPoolStatBackupPoolTranslations | read-only | current | The number of translation requests that were served using the backup pool. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.12 | ScalarsysLsnPoolStatLogAttempts | read-only | current | The number of logging attempts. |
| 1.3.6.1.4.1.3375.2.1.1.2.25.13 | ScalarsysLsnPoolStatLogFailures | read-only | current | The number of logging attempts that resulted in failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.26 | NodesysGlobalFtpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.26.1 | ScalarsysGlobalFtpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalFtpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.26.2 | ScalarsysGlobalFtpStatLoginRequests | read-only | current | The total number of login requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.26.3 | ScalarsysGlobalFtpStatDownloadRequests | read-only | current | The total number of download requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.26.4 | ScalarsysGlobalFtpStatUploadRequests | read-only | current | The total number of upload requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.27 | NodesysGlobalSipStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.27.1 | ScalarsysGlobalSipStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalSipStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.27.2 | ScalarsysGlobalSipStatRequests | read-only | current | The total number of requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.27.3 | ScalarsysGlobalSipStatResponses | read-only | current | The total number of responses sent. |
| 1.3.6.1.4.1.3375.2.1.1.2.27.4 | ScalarsysGlobalSipStatBadmsgs | read-only | current | The total number of bad messages due to malform requests. |
| 1.3.6.1.4.1.3375.2.1.1.2.27.5 | ScalarsysGlobalSipStatDrops | read-only | current | The total number of dropped packets. |
| 1.3.6.1.4.1.3375.2.1.1.2.28 | NodesysGlobalPptpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.28.1 | ScalarsysProfilePptpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalPptpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be r… |
| 1.3.6.1.4.1.3375.2.1.1.2.28.2 | ScalarsysProfilePptpStatStartRequests | read-only | current | Number of PPTP control messages used to establish the control connection between a server and a client. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.3 | ScalarsysProfilePptpStatStartReplies | read-only | current | Number of PPTP control messages sent in reply to a received Start-Control-Connection-Request message. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.4 | ScalarsysProfilePptpStatStopRequests | read-only | current | Number of PPTP control messages sent by one peer of a client-server control connection to inform the other peer that the control connection should be closed. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.5 | ScalarsysProfilePptpStatStopReplies | read-only | current | Number of PPTP control messages sent by one peer of a client-server control connection upon receipt of a Stop-Control-Connection-Request from the other peer. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.6 | ScalarsysProfilePptpStatEchoRequests | read-only | current | Number of PPTP control messages sent by either peer of a client-server control connection. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.7 | ScalarsysProfilePptpStatEchoReplies | read-only | current | Number of PPTP control messages sent by either peer of a client-server control connection in response to the receipt of an Echo-Request. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.8 | ScalarsysProfilePptpStatOutgoingCallRequests | read-only | current | Number of PPTP control messages sent by the server to the client to indicate that an outbound call from the client is to be established. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.9 | ScalarsysProfilePptpStatOutgoingCallReplies | read-only | current | Number of PPTP control messages sent by the client to the server in response to a received Outgoing-Call-Request message. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.10 | ScalarsysProfilePptpStatCallClearRequests | read-only | current | Number of PPTP control messages sent by the server to the client indicating that a particular call is to be disconnected. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.11 | ScalarsysProfilePptpStatCallDisconnectNotifies | read-only | current | Number of PPTP Call-Disconnect-Notify control messages sent by the client to the server. Its purpose is to inform the server of both the disconnection and the … |
| 1.3.6.1.4.1.3375.2.1.1.2.28.12 | ScalarsysProfilePptpStatWanErrorNotifies | read-only | current | Number of WAN-Error-Notify messages sent by the client to the server to indicate WAN error conditions (conditions that occur on the interface supporting PPP). |
| 1.3.6.1.4.1.3375.2.1.1.2.28.13 | ScalarsysProfilePptpStatSetLinkInfo | read-only | current | Number of PPTP control messages sent by the server to the client to set PPP-negotiated options. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.14 | ScalarsysProfilePptpStatActiveCalls | read-only | current | Number of active PPTP calls. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.15 | ScalarsysProfilePptpStatTotalCalls | read-only | current | Total number of PPTP calls served. |
| 1.3.6.1.4.1.3375.2.1.1.2.28.16 | ScalarsysProfilePptpStatFailedCalls | read-only | current | Total number of PPTP calls that failed. |
| 1.3.6.1.4.1.3375.2.1.1.2.29 | NodesysGlobalPcpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.29.1 | ScalarsysPcpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalPcpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.1.2.29.2 | ScalarsysPcpStatPcpAnnounceRequests | read-only | current | The total number of Announce requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.3 | ScalarsysPcpStatPcpAnnounceResponsesUcast | read-only | current | The total number of unicast Announce responses transmitted. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.4 | ScalarsysPcpStatPcpAnnounceResponsesMulticast | read-only | current | The total number of multicast Announce responses transmitted. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.5 | ScalarsysPcpStatPcpMapRequests | read-only | current | The total number of Map requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.6 | ScalarsysPcpStatPcpMapResponses | read-only | current | The total number of Map responses transmitted. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.7 | ScalarsysPcpStatPcpPeerRequests | read-only | current | The total number of Peer requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.8 | ScalarsysPcpStatPcpPeerResponses | read-only | current | The total number of Peer responses transmitted. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.9 | ScalarsysPcpStatPcpErrorsInvalidRequests | read-only | current | The total number of invalid or malformed PCP requests received. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.10 | ScalarsysPcpStatPcpErrorsUnavailableResource | read-only | current | The total number of PCP requests received where the server has insufficient resources to complete the requested operation. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.11 | ScalarsysPcpStatPcpErrorsNotAuthorized | read-only | current | The total number of PCP requests that generated (or caused) an unauthorized error when attempting to create a mapping. |
| 1.3.6.1.4.1.3375.2.1.1.2.29.12 | ScalarsysPcpStatPcpErrorsOther | read-only | current | The total number of PCP requests received that resulted in other errors. |
| 1.3.6.1.4.1.3375.2.1.1.2.30 | NodesysGlobalDnsServerStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.30.1 | ScalarsysDnsServerStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalDnsServerStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not… |
| 1.3.6.1.4.1.3375.2.1.1.2.30.2 | ScalarsysDnsServerStatXfrQueries | read-only | current | The number of zone transfer queries. |
| 1.3.6.1.4.1.3375.2.1.1.2.30.3 | ScalarsysDnsServerStatXfrResponses | read-only | current | The number of zone transfer responses. |
| 1.3.6.1.4.1.3375.2.1.1.2.30.4 | ScalarsysDnsServerStatXfrNotifies | read-only | current | The number of zone transfer notifies. |
| 1.3.6.1.4.1.3375.2.1.1.2.30.5 | ScalarsysDnsServerStatXfrNotifyFailed | read-only | current | The number of zone transfer notify failures. |
| 1.3.6.1.4.1.3375.2.1.1.2.31 | NodesysGlobalMptcpStat | |||
| 1.3.6.1.4.1.3375.2.1.1.2.31.1 | ScalarsysMptcpStatResetStats | read-write | current | The action to reset resetable statistics data in sysGlobalMptcpStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be … |
| 1.3.6.1.4.1.3375.2.1.1.2.31.2 | ScalarsysMptcpStatAccept | read-only | current | The total number of primary MPTCP connections accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.3 | ScalarsysMptcpStatAcceptFail | read-only | current | The total number of primary MPTCP connections rejected. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.4 | ScalarsysMptcpStatJoinFlow | read-only | current | The total number of secondary MPTCP connections accepted. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.5 | ScalarsysMptcpStatJoinFlowFail | read-only | current | The total number of secondary MPTCP connections rejected. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.6 | ScalarsysMptcpStatClose | read-only | current | The total number of MPTCP connections closed. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.7 | ScalarsysMptcpStatRxtimeout | read-only | current | The total number of retransmission timeouts for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.8 | ScalarsysMptcpStatRxfailover | read-only | current | The total number of retransmission failovers for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.9 | ScalarsysMptcpStatAddAddrTx | read-only | current | The total number of add_addr sent for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.10 | ScalarsysMptcpStatAddAddrRx | read-only | current | The total number of add_addr received for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.11 | ScalarsysMptcpStatRemAddrTx | read-only | current | The total number of remove_addr sent for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.12 | ScalarsysMptcpStatRemAddrRx | read-only | current | The total number of remove_addr received for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.13 | ScalarsysMptcpStatPrioTx | read-only | current | The total number of priority events sent for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.14 | ScalarsysMptcpStatPrioRx | read-only | current | The total number of priority events received for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.15 | ScalarsysMptcpStatFailTx | read-only | current | The total number of fallback events sent for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.16 | ScalarsysMptcpStatFailRx | read-only | current | The total number of fallback events received for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.17 | ScalarsysMptcpStatFastcloseTx | read-only | current | The total number of fastclose events sent for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.1.2.31.18 | ScalarsysMptcpStatFastcloseRx | read-only | current | The total number of fastclose events received for MPTCP connections. |
| 1.3.6.1.4.1.3375.2.1.2 | NodesysNetwork | |||
| 1.3.6.1.4.1.3375.2.1.2.1 | NodesysAdmin | |||
| 1.3.6.1.4.1.3375.2.1.2.1.1 | NodesysAdminIp | |||
| 1.3.6.1.4.1.3375.2.1.2.1.1.1 | ScalarsysAdminIpNumber | read-only | current | The number of sysAdminIp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2 | TablesysAdminIpTable | not-accessible | current | A table containing information of a device's administrative IP addresses on this machine. |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2.1 | RowsysAdminIpEntry | not-accessible | current | Columns in the sysAdminIp Table |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2.1.1 | ColumnsysAdminIpAddrType | read-only | current | The IP address type of sysAdminIpAddr |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2.1.2 | ColumnsysAdminIpAddr | read-only | current | An administrative IP address on this machine. It is interpreted within the context of a sysAdminIpAddrType value. |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2.1.3 | ColumnsysAdminIpNetmaskType | read-only | current | The netmask type of sysAdminIpNetmask |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2.1.4 | ColumnsysAdminIpNetmask | read-only | current | The netmask for the administrative IP address on this machine. It is interpreted within the context of a sysAdminIpNetmaskType value. |
| 1.3.6.1.4.1.3375.2.1.2.1.1.2.1.5 | ColumnsysAdminIpName | read-only | current | The name of admin ip. |
| 1.3.6.1.4.1.3375.2.1.2.2 | NodesysArpNdp | |||
| 1.3.6.1.4.1.3375.2.1.2.2.1 | NodesysArpStaticEntry | |||
| 1.3.6.1.4.1.3375.2.1.2.2.1.1 | ScalarsysArpStaticEntryNumber | read-only | current | The number of sysArpStaticEntry entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.2.1.2 | TablesysArpStaticEntryTable | not-accessible | current | A table containing information of static ARP/NDP entries. |
| 1.3.6.1.4.1.3375.2.1.2.2.1.2.1 | RowsysArpStaticEntryEntry | not-accessible | current | Columns in the sysArpStaticEntry Table |
| 1.3.6.1.4.1.3375.2.1.2.2.1.2.1.1 | ColumnsysArpStaticEntryIpAddrType | read-only | current | The IP address type of sysArpStaticEntryIpAddr. |
| 1.3.6.1.4.1.3375.2.1.2.2.1.2.1.2 | ColumnsysArpStaticEntryIpAddr | read-only | current | An IP address entry of the ARP/NDP entry. It is interpreted within the context of a sysArpStaticEntryIpAddrType. |
| 1.3.6.1.4.1.3375.2.1.2.2.1.2.1.3 | ColumnsysArpStaticEntryMacAddr | read-only | current | The MAC address which the specified IP address to be mapped to. |
| 1.3.6.1.4.1.3375.2.1.2.2.1.2.1.4 | ColumnsysArpStaticEntryName | read-only | current | The name binding |
| 1.3.6.1.4.1.3375.2.1.2.3 | NodesysDot1dBridge | |||
| 1.3.6.1.4.1.3375.2.1.2.3.1 | NodesysDot1dbaseStat | |||
| 1.3.6.1.4.1.3375.2.1.2.3.1.1 | ScalarsysDot1dbaseStatResetStats | read-write | current | The action to reset resetable statistics data in sysDot1dbaseStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.2.3.1.2 | ScalarsysDot1dbaseStatMacAddr | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.3375.2.1.2.3.1.3 | ScalarsysDot1dbaseStatNumPorts | read-only | current | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.3375.2.1.2.3.1.4 | ScalarsysDot1dbaseStatType | read-only | current | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.3375.2.1.2.3.2 | NodesysDot1dbaseStatPort | |||
| 1.3.6.1.4.1.3375.2.1.2.3.2.1 | ScalarsysDot1dbaseStatPortNumber | read-only | current | The number of sysDot1dbaseStatPort entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2 | TablesysDot1dbaseStatPortTable | not-accessible | current | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, etc. ports are included. This is a p… |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2.1 | RowsysDot1dbaseStatPortEntry | not-accessible | current | Columns in the sysDot1dbaseStatPort Table |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2.1.1 | ColumnsysDot1dbaseStatPortIndex | read-only | current | The index of the table that contains generic information about every port that is associated with this bridge. |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2.1.2 | ColumnsysDot1dbaseStatPortPort | read-only | current | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2.1.3 | ColumnsysDot1dbaseStatPortName | read-only | current | The name of the interface corresponding to the port. |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2.1.4 | ColumnsysDot1dbaseStatPortDelayExceededDiscards | read-only | current | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.3375.2.1.2.3.2.2.1.5 | ColumnsysDot1dbaseStatPortMtuExceededDiscards | read-only | current | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.3375.2.1.2.4 | NodesysInterfaces | |||
| 1.3.6.1.4.1.3375.2.1.2.4.1 | NodesysInterface | |||
| 1.3.6.1.4.1.3375.2.1.2.4.1.1 | ScalarsysInterfaceNumber | read-only | current | The number of sysInterface entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2 | TablesysInterfaceTable | not-accessible | current | A table containing information of the interfaces on the device. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1 | RowsysInterfaceEntry | not-accessible | current | Columns in the sysInterface Table |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.1 | ColumnsysInterfaceName | read-only | current | The name of an interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.2 | ColumnsysInterfaceMediaMaxSpeed | read-only | current | The best possible media speed in MBPS for the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.3 | ColumnsysInterfaceMediaMaxDuplex | read-only | current | The best possible media duplex mode for the specified interface. half - Force half duplex; full - Force full duplex; none - All media is deselected. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.4 | ColumnsysInterfaceMediaActiveSpeed | read-only | current | The current active media speed for the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.5 | ColumnsysInterfaceMediaActiveDuplex | read-only | current | The active media duplex mode for the specified interface. half - Force half duplex; full - Force full duplex; none - All media is deselected. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.6 | ColumnsysInterfaceMacAddr | read-only | current | The MAC address of the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.7 | ColumnsysInterfaceMtu | read-only | current | The maximum transmission unit size of datagram which can be sent/received on the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.8 | ColumnsysInterfaceEnabled | read-only | current | The state of the specified interface, whether it is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.9 | ColumnsysInterfaceLearnMode | read-only | current | The learn mode of the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.10 | ColumnsysInterfaceFlowCtrlReq | read-only | current | The request pause state of the specified interface. none - no pause; txrx - pause all data flow; tx - pause out going data flow; rx - pause in coming data flow. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.11 | ColumnsysInterfaceStpLink | read-only | current | The STP link types for the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.12 | ColumnsysInterfaceStpEdge | read-only | current | The edge-port state for the specified interface is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.13 | ColumnsysInterfaceStpEdgeActive | read-only | current | The active edge-port state for the specified interface is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.14 | ColumnsysInterfaceStpAuto | read-only | current | The auto edge-port detection state for the specified interface is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.15 | ColumnsysInterfaceStpEnable | read-only | current | The STP state for the specified interface is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.16 | ColumnsysInterfaceStpReset | read-only | current | The STP protocol detection reset state for the specified interface is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.17 | ColumnsysInterfaceStatus | read-only | current | The current state of the specified interface. up - has link and is initialized; down - has no link and is initialized; uninitialized - has not been initialized… |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.18 | ColumnsysInterfaceComboPort | read-only | current | The state which indicates whether or not the specified interface is a dual media port supporting both fixed copper and SFP. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.19 | ColumnsysInterfacePreferSfp | read-only | current | The state which indicates whether or not SFP is the preferred media. This is only used only for dual media ports. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.20 | ColumnsysInterfaceSfpMedia | read-only | current | The state indicating whether or not the specified interface supports SFP media. |
| 1.3.6.1.4.1.3375.2.1.2.4.1.2.1.21 | ColumnsysInterfacePhyMaster | read-only | current | The configured SFP media type of the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.2 | NodesysInterfaceMediaOptions | |||
| 1.3.6.1.4.1.3375.2.1.2.4.2.1 | ScalarsysIntfMediaNumber | read-only | current | The number of sysInterfaceMediaOptions entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.4.2.2 | TablesysIntfMediaTable | not-accessible | current | A table containing information of the non-SFP media options of the interfaces. |
| 1.3.6.1.4.1.3375.2.1.2.4.2.2.1 | RowsysIntfMediaEntry | not-accessible | current | Columns in the sysIntfMedia Table |
| 1.3.6.1.4.1.3375.2.1.2.4.2.2.1.1 | ColumnsysIntfMediaName | read-only | current | The name of an interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.2.2.1.2 | ColumnsysIntfMediaIndex | read-only | current | The index of the non-SFP media option for the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.2.2.1.3 | ColumnsysIntfMediaMediaOption | read-only | current | The media option for non-SFP media of the specified interface. media10THdx - 10BaseT:RJ45, half duplex, media10TFdx - 10BaseT:RJ45, full duplex, media100TxHdx … |
| 1.3.6.1.4.1.3375.2.1.2.4.3 | NodesysInterfaceId | |||
| 1.3.6.1.4.1.3375.2.1.2.4.3.1 | ScalarsysIfNumber | read-only | current | The number of sysInterfaceId entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.4.3.2 | TablesysIfTable | not-accessible | current | A table that contains information of numerical IDs and names of a collection of interfaces. |
| 1.3.6.1.4.1.3375.2.1.2.4.3.2.1 | RowsysIfEntry | not-accessible | current | Columns in the sysIf Table |
| 1.3.6.1.4.1.3375.2.1.2.4.3.2.1.1 | ColumnsysIfIndex | read-only | current | The unique value for an interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.3.2.1.2 | ColumnsysIfName | read-only | current | The name for an interface associated with the specified interface ID. |
| 1.3.6.1.4.1.3375.2.1.2.4.4 | NodesysInterfaceStat | |||
| 1.3.6.1.4.1.3375.2.1.2.4.4.1 | ScalarsysInterfaceStatResetStats | read-write | current | The action to reset resetable statistics data in sysInterfaceStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.2.4.4.2 | ScalarsysInterfaceStatNumber | read-only | current | The number of sysInterfaceStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3 | TablesysInterfaceStatTable | not-accessible | current | A table containing statistic information of the interfaces on the device. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1 | RowsysInterfaceStatEntry | not-accessible | current | Columns in the sysInterfaceStat Table |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.1 | ColumnsysInterfaceStatName | read-only | current | The name of an interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.2 | ColumnsysInterfaceStatPktsIn | read-only | current | The number of packets received on this interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.3 | ColumnsysInterfaceStatBytesIn | read-only | current | The number of bytes received on the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.4 | ColumnsysInterfaceStatPktsOut | read-only | current | The number of packets transmitted out of the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.5 | ColumnsysInterfaceStatBytesOut | read-only | current | The number of bytes transmitted out of the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.6 | ColumnsysInterfaceStatMcastIn | read-only | current | The number of multicast packets received on the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.7 | ColumnsysInterfaceStatMcastOut | read-only | current | The number of multicast packets transmitted out of the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.8 | ColumnsysInterfaceStatErrorsIn | read-only | current | The number of received packets that are either undersized, oversized, or have FCS errors by the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.9 | ColumnsysInterfaceStatErrorsOut | read-only | current | The number of excessive collisions, incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.10 | ColumnsysInterfaceStatDropsIn | read-only | current | The number of packets dropped on ingress for various reasons on the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.11 | ColumnsysInterfaceStatDropsOut | read-only | current | The number of packets aged out or with excessive transmission delays due to multiple deferrals on the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.12 | ColumnsysInterfaceStatCollisions | read-only | current | The number of collisions on the specified interface, incremented by the number of collisions experienced during transmissions of a frame |
| 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.13 | ColumnsysInterfaceStatPauseActive | read-only | current | The pause state of the specified interface. none - no pause; txrx - pause all data flow; tx - pause out going data flow; rx - pause in coming data flow. |
| 1.3.6.1.4.1.3375.2.1.2.4.5 | NodesysIfxStat | |||
| 1.3.6.1.4.1.3375.2.1.2.4.5.1 | ScalarsysIfxStatResetStats | read-write | current | The action to reset resetable statistics data in sysIfxStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset in… |
| 1.3.6.1.4.1.3375.2.1.2.4.5.2 | ScalarsysIfxStatNumber | read-only | current | The number of sysIfxStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3 | TablesysIfxStatTable | not-accessible | current | A table that contains additional statistic information of collection of interfaces. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1 | RowsysIfxStatEntry | not-accessible | current | Columns in the sysIfxStat Table |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.1 | ColumnsysIfxStatName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.2 | ColumnsysIfxStatInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.3 | ColumnsysIfxStatInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.4 | ColumnsysIfxStatOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.5 | ColumnsysIfxStatOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.6 | ColumnsysIfxStatHcInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.7 | ColumnsysIfxStatHcInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.8 | ColumnsysIfxStatHcInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.9 | ColumnsysIfxStatHcInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.10 | ColumnsysIfxStatHcOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.11 | ColumnsysIfxStatHcOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.12 | ColumnsysIfxStatHcOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.13 | ColumnsysIfxStatHcOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.14 | ColumnsysIfxStatHighSpeed | read-only | current | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.15 | ColumnsysIfxStatConnectorPresent | read-only | current | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.16 | ColumnsysIfxStatCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are th… |
| 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.17 | ColumnsysIfxStatAlias | read-only | current | This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.6 | NodesysInterfaceMediaSfp | |||
| 1.3.6.1.4.1.3375.2.1.2.4.6.1 | ScalarsysIntfMediaSfpNumber | read-only | current | The number of sysInterfaceMediaSfp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.4.6.2 | TablesysIntfMediaSfpTable | not-accessible | current | A table containing information of the SFP media options of the interfaces. |
| 1.3.6.1.4.1.3375.2.1.2.4.6.2.1 | RowsysIntfMediaSfpEntry | not-accessible | current | Columns in the sysIntfMediaSfp Table |
| 1.3.6.1.4.1.3375.2.1.2.4.6.2.1.1 | ColumnsysIntfMediaSfpName | read-only | current | The name of an interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.6.2.1.2 | ColumnsysIntfMediaSfpIndex | read-only | current | The index of the SFP media option for the specified interface. |
| 1.3.6.1.4.1.3375.2.1.2.4.6.2.1.3 | ColumnsysIntfMediaSfpType | read-only | current | The media option for SFP media of the specified interface. media10THdx - 10BaseT:RJ45, half duplex, media10TFdx - 10BaseT:RJ45, full duplex, media100TxHdx - 10… |
| 1.3.6.1.4.1.3375.2.1.2.5 | NodesysL2 | |||
| 1.3.6.1.4.1.3375.2.1.2.5.1 | NodesysL2Forward | |||
| 1.3.6.1.4.1.3375.2.1.2.5.1.1 | ScalarsysL2ForwardNumber | read-only | current | The number of sysL2Forward entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2 | TablesysL2ForwardTable | not-accessible | current | A table containing static L2 forwarding entries information. |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2.1 | RowsysL2ForwardEntry | not-accessible | current | Columns in the sysL2Forward Table |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2.1.1 | ColumnsysL2ForwardVlanName | read-only | current | The VLAN name which static forward entity is from. |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2.1.2 | ColumnsysL2ForwardMacAddr | read-only | current | The MAC address for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2.1.3 | ColumnsysL2ForwardIfname | read-only | current | The name of interface for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2.1.4 | ColumnsysL2ForwardIftype | read-only | current | The type of interface for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.5.1.2.1.5 | ColumnsysL2ForwardDynamic | read-only | current | The dynamic state of the specified entity. |
| 1.3.6.1.4.1.3375.2.1.2.5.2 | NodesysL2ForwardStat | |||
| 1.3.6.1.4.1.3375.2.1.2.5.2.1 | ScalarsysL2ForwardStatNumber | read-only | current | The number of sysL2ForwardStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2 | TablesysL2ForwardStatTable | not-accessible | current | A table containing current entries (dynamic and static) of L2 forwarding information. An object of this type is transient. By default, this table displays noth… |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2.1 | RowsysL2ForwardStatEntry | not-accessible | current | Columns in the sysL2ForwardStat Table |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2.1.1 | ColumnsysL2ForwardStatVlanName | read-only | current | The VLAN name which static forward entity is from. |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2.1.2 | ColumnsysL2ForwardStatMacAddr | read-only | current | The MAC address for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2.1.3 | ColumnsysL2ForwardStatIfname | read-only | current | The name of interface for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2.1.4 | ColumnsysL2ForwardStatIftype | read-only | current | The type of interface for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.5.2.2.1.5 | ColumnsysL2ForwardStatDynamic | read-only | current | The dynamic state of the specified entity. |
| 1.3.6.1.4.1.3375.2.1.2.5.3 | NodesysL2ForwardAttr | |||
| 1.3.6.1.4.1.3375.2.1.2.5.3.1 | ScalarsysL2ForwardAttrVlan | read-write | current | The VLAN name which is used for querying sysL2ForwardStat. sysL2ForwardStat will display L2 forward statistics associated VLAN specified here. The default is s… |
| 1.3.6.1.4.1.3375.2.1.2.6 | NodesysPacketFilters | |||
| 1.3.6.1.4.1.3375.2.1.2.6.1 | NodesysPacketFilter | |||
| 1.3.6.1.4.1.3375.2.1.2.6.1.1 | ScalarsysPacketFilterNumber | read-only | current | The number of sysPacketFilter entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2 | TablesysPacketFilterTable | not-accessible | current | A table containing information of packet filters. |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1 | RowsysPacketFilterEntry | not-accessible | current | Columns in the sysPacketFilter Table |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.1 | ColumnsysPacketFilterRname | read-only | current | The name of the rule is used only for identification by the user and for logging. |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.2 | ColumnsysPacketFilterOrder | read-only | current | The rule sort-order. The sort-order part of the rule is an integer value used to assign a relative weight to the rule. The sort-order may be any number between… |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.3 | ColumnsysPacketFilterAction | read-only | current | The action the filter takes. The action part of the rule can be any one of the values accept, discard, reject or none. The reject behaves as discard, but also … |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.4 | ColumnsysPacketFilterVname | read-only | current | The VLAN name currently in existence. The VLAN part of the rule determines which ingress VLAN to match on. If present, this must be a specific VLAN name curren… |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.5 | ColumnsysPacketFilterLog | read-only | current | The log option, whether or not logging will be performed. If a rule has an associated logging action, an entry will be created in the system log each time the … |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.6 | ColumnsysPacketFilterRclass | read-only | current | The rate class name specified by the user. |
| 1.3.6.1.4.1.3375.2.1.2.6.1.2.1.7 | ColumnsysPacketFilterExpression | read-only | current | The BPF(Berkeley Packet Filter) filter expression. The filter part of the rule is the expression used to match ingress traffic. |
| 1.3.6.1.4.1.3375.2.1.2.6.2 | NodesysPacketFilterAddress | |||
| 1.3.6.1.4.1.3375.2.1.2.6.2.1 | ScalarsysPacketFilterAddrNumber | read-only | current | The number of sysPacketFilterAddress entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.6.2.2 | TablesysPacketFilterAddrTable | not-accessible | current | A table containing information of rate filter allow/trusted addresses. |
| 1.3.6.1.4.1.3375.2.1.2.6.2.2.1 | RowsysPacketFilterAddrEntry | not-accessible | current | Columns in the sysPacketFilterAddr Table |
| 1.3.6.1.4.1.3375.2.1.2.6.2.2.1.1 | ColumnsysPacketFilterAddrIndex | read-only | current | Name is now used for indexing. |
| 1.3.6.1.4.1.3375.2.1.2.6.2.2.1.2 | ColumnsysPacketFilterAddrIpType | read-only | current | The IP address type of sysPacketFilterAllowTrustedAddress |
| 1.3.6.1.4.1.3375.2.1.2.6.2.2.1.3 | ColumnsysPacketFilterAddrIp | read-only | current | The allow trusted IP address in the packet filter. It is interpreted within the context of an sysPacketFilterAllowTrustedAddressType value. |
| 1.3.6.1.4.1.3375.2.1.2.6.2.2.1.4 | ColumnsysPacketFilterAddrRname | read-only | current | The name of the rule for use in folders. |
| 1.3.6.1.4.1.3375.2.1.2.6.3 | NodesysPacketFilterVlan | |||
| 1.3.6.1.4.1.3375.2.1.2.6.3.1 | ScalarsysPacketFilterVlanNumber | read-only | current | The number of sysPacketFilterVlan entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.6.3.2 | TablesysPacketFilterVlanTable | not-accessible | current | A table containing information of rate filter allow/trusted VLANs. |
| 1.3.6.1.4.1.3375.2.1.2.6.3.2.1 | RowsysPacketFilterVlanEntry | not-accessible | current | Columns in the sysPacketFilterVlan Table |
| 1.3.6.1.4.1.3375.2.1.2.6.3.2.1.1 | ColumnsysPacketFilterVlanIndex | read-only | current | Name is now used for indexing. |
| 1.3.6.1.4.1.3375.2.1.2.6.3.2.1.2 | ColumnsysPacketFilterVlanName | read-only | current | The name of the allow trusted VLAN in the packet filter. |
| 1.3.6.1.4.1.3375.2.1.2.6.3.2.1.3 | ColumnsysPacketFilterVlanRname | read-only | current | The name of the rule for use in folders. |
| 1.3.6.1.4.1.3375.2.1.2.6.4 | NodesysPacketFilterMac | |||
| 1.3.6.1.4.1.3375.2.1.2.6.4.1 | ScalarsysPacketFilterMacNumber | read-only | current | The number of sysPacketFilterMac entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.6.4.2 | TablesysPacketFilterMacTable | not-accessible | current | A table containing information of rate filter allow/trusted MAC addresses. |
| 1.3.6.1.4.1.3375.2.1.2.6.4.2.1 | RowsysPacketFilterMacEntry | not-accessible | current | Columns in the sysPacketFilterMac Table |
| 1.3.6.1.4.1.3375.2.1.2.6.4.2.1.1 | ColumnsysPacketFilterMacIndex | read-only | current | Name is now used for indexing. |
| 1.3.6.1.4.1.3375.2.1.2.6.4.2.1.2 | ColumnsysPacketFilterMacAddr | read-only | current | The allow trusted MAC address in the packet filter. |
| 1.3.6.1.4.1.3375.2.1.2.6.4.2.1.3 | ColumnsysPacketFilterMacRname | read-only | current | The name of the rule for use in folders. |
| 1.3.6.1.4.1.3375.2.1.2.6.5 | NodesysPacketFilterStat | |||
| 1.3.6.1.4.1.3375.2.1.2.6.5.1 | ScalarsysPacketFilterStatResetStats | read-write | current | The action to reset resetable statistics data in sysPacketFilterStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be… |
| 1.3.6.1.4.1.3375.2.1.2.6.5.2 | ScalarsysPacketFilterStatNumber | read-only | current | The number of sysPacketFilterStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.6.5.3 | TablesysPacketFilterStatTable | not-accessible | current | A table containing statistic information of packet filters. |
| 1.3.6.1.4.1.3375.2.1.2.6.5.3.1 | RowsysPacketFilterStatEntry | not-accessible | current | Columns in the sysPacketFilterStat Table |
| 1.3.6.1.4.1.3375.2.1.2.6.5.3.1.1 | ColumnsysPacketFilterStatRname | read-only | current | The name of the rule is used only for identification by the user and for logging. |
| 1.3.6.1.4.1.3375.2.1.2.6.5.3.1.2 | ColumnsysPacketFilterStatHits | read-only | current | The number of matches on filter rule. Each time a rule is matched by a packet, a use count for that rule is incremented. This is unrelated to the optional logg… |
| 1.3.6.1.4.1.3375.2.1.2.7 | NodesysRoute | |||
| 1.3.6.1.4.1.3375.2.1.2.7.1 | NodesysRouteMgmtEntry | |||
| 1.3.6.1.4.1.3375.2.1.2.7.1.1 | ScalarsysRouteMgmtEntryNumber | read-only | current | The number of sysRouteMgmtEntry entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2 | TablesysRouteMgmtEntryTable | not-accessible | current | A table containing administrative route information. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1 | RowsysRouteMgmtEntryEntry | not-accessible | current | Columns in the sysRouteMgmtEntry Table |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.1 | ColumnsysRouteMgmtEntryDestType | read-only | current | The IP address type of sysRouteMgmtEntryDest. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.2 | ColumnsysRouteMgmtEntryDest | read-only | current | The destination IP address in the route table. It is interpreted within the context of a sysRouteMgmtEntryDestType value. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.3 | ColumnsysRouteMgmtEntryNetmaskType | read-only | current | The IP address type of sysRouteMgmtEntryNetmask. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.4 | ColumnsysRouteMgmtEntryNetmask | read-only | current | The netmask of the specified destination IP address in the route table. It is interpreted within the context of a sysRouteMgmtEntryNetmaskType value. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.5 | ColumnsysRouteMgmtEntryType | read-only | current | The type of the specified route. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.6 | ColumnsysRouteMgmtEntryGatewayType | read-only | current | The IP address type of sysRouteMgmtEntryGateway. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.7 | ColumnsysRouteMgmtEntryGateway | read-only | current | The gateway to the specified destination IP address in the route table. It is interpreted within the context of an sysRouteMgmtEntryGatewayType value. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.8 | ColumnsysRouteMgmtEntryMtu | read-only | current | The maximum transmission unit size of datagram which can be sent to the specified destination. |
| 1.3.6.1.4.1.3375.2.1.2.7.1.2.1.9 | ColumnsysRouteMgmtEntryName | read-only | current | The name of destination. |
| 1.3.6.1.4.1.3375.2.1.2.7.2 | NodesysRouteStaticEntry | |||
| 1.3.6.1.4.1.3375.2.1.2.7.2.1 | ScalarsysRouteStaticEntryNumber | read-only | current | The number of sysRouteStaticEntry entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2 | TablesysRouteStaticEntryTable | not-accessible | current | A table containing static route information. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1 | RowsysRouteStaticEntryEntry | not-accessible | current | Columns in the sysRouteStaticEntry Table |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.1 | ColumnsysRouteStaticEntryDestType | read-only | current | The IP address type of sysRouteStaticEntryDest. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.2 | ColumnsysRouteStaticEntryDest | read-only | current | The destination IP address in the route table. It is interpreted within the context of a sysRouteStaticEntryDestType value. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.3 | ColumnsysRouteStaticEntryNetmaskType | read-only | current | The IP address type of sysRouteStaticEntryNetmask. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.4 | ColumnsysRouteStaticEntryNetmask | read-only | current | The netmask of the specified destination IP address in the route table. It is interpreted within the context of a sysRouteStaticEntryNetmaskType value. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.5 | ColumnsysRouteStaticEntryType | read-only | current | The type of the specified route. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.6 | ColumnsysRouteStaticEntryVlanName | read-only | current | The name of the VLAN which the specified destination associates with. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.7 | ColumnsysRouteStaticEntryGatewayType | read-only | current | The IP address type of sysRouteStaticEntryGateway. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.8 | ColumnsysRouteStaticEntryGateway | read-only | current | The gateway to the specified destination IP address in the route table. It is interpreted within the context of an sysRouteStaticEntryGatewayType value. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.9 | ColumnsysRouteStaticEntryPoolName | read-only | current | The name of the pool which the specified destination associates with. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.10 | ColumnsysRouteStaticEntryMtu | read-only | current | The maximum transmission unit size of datagram which can be sent to the specified destination. |
| 1.3.6.1.4.1.3375.2.1.2.7.2.2.1.11 | ColumnsysRouteStaticEntryName | read-only | current | The name of destination. |
| 1.3.6.1.4.1.3375.2.1.2.8 | NodesysSelfIps | |||
| 1.3.6.1.4.1.3375.2.1.2.8.1 | NodesysSelfIp | |||
| 1.3.6.1.4.1.3375.2.1.2.8.1.1 | ScalarsysSelfIpNumber | read-only | current | The number of sysSelfIp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2 | TablesysSelfIpTable | not-accessible | current | A table containing information of self IPs. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1 | RowsysSelfIpEntry | not-accessible | current | Columns in the sysSelfIp Table |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.1 | ColumnsysSelfIpAddrType | read-only | current | The IP address type of sysSelfIpAddr. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.2 | ColumnsysSelfIpAddr | read-only | current | The IP address of a self IP. It is interpreted within the context of a sysSelfIpAddrType value. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.3 | ColumnsysSelfIpNetmaskType | read-only | current | The IP address type of sysSelfIpNetmask. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.4 | ColumnsysSelfIpNetmask | read-only | current | The netmask of the specified self IP. It is interpreted within the context of a sysSelfIpNetmaskType value. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.5 | ColumnsysSelfIpUnitId | read-only | current | The unit number associated with the specified self IP address. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.6 | ColumnsysSelfIpIsFloating | read-only | current | The state of the specified self IP address, whether it is shared. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.7 | ColumnsysSelfIpVlanName | read-only | current | The VLAN associated with the specified self IP address. |
| 1.3.6.1.4.1.3375.2.1.2.8.1.2.1.8 | ColumnsysSelfIpName | read-only | current | The name of self IP. |
| 1.3.6.1.4.1.3375.2.1.2.9 | NodesysSelfPorts | |||
| 1.3.6.1.4.1.3375.2.1.2.9.1 | NodesysSelfPort | |||
| 1.3.6.1.4.1.3375.2.1.2.9.1.1 | ScalarsysSelfPortNumber | read-only | current | The number of sysSelfPort entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2 | TablesysSelfPortTable | not-accessible | current | A table containing information of self IP access list. |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2.1 | RowsysSelfPortEntry | not-accessible | current | Columns in the sysSelfPort Table |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2.1.1 | ColumnsysSelfPortAddrType | read-only | deprecated | Deprecated! Use self_name as index The IP address type of sysSelfPortAddr. |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2.1.2 | ColumnsysSelfPortAddr | read-only | deprecated | Deprecated! Use self_name as index The self IP address. It is interpreted within the context of a sysSelfPortAddrType value. |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2.1.3 | ColumnsysSelfPortProtocol | read-only | current | The protocol allowed to access for the specified self IP. '0' means allowing all protocols; '256' means allowing the default list, which is listed in sysSelfPo… |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2.1.4 | ColumnsysSelfPortPort | read-only | current | The service allowed to access for the specified self IP. '0' means allowing all services for the specified protocol(s). |
| 1.3.6.1.4.1.3375.2.1.2.9.1.2.1.5 | ColumnsysSelfPortSelfName | read-only | current | The name of self port. |
| 1.3.6.1.4.1.3375.2.1.2.9.2 | NodesysSelfPortDefault | |||
| 1.3.6.1.4.1.3375.2.1.2.9.2.1 | ScalarsysSelfPortDefNumber | read-only | current | The number of sysSelfPortDefault entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.9.2.2 | TablesysSelfPortDefTable | not-accessible | current | A table containing information of default protocol/service access list. |
| 1.3.6.1.4.1.3375.2.1.2.9.2.2.1 | RowsysSelfPortDefEntry | not-accessible | current | Columns in the sysSelfPortDef Table |
| 1.3.6.1.4.1.3375.2.1.2.9.2.2.1.1 | ColumnsysSelfPortDefProtocol | read-only | current | The default protocol allowed. '0' means allowing all protocols. |
| 1.3.6.1.4.1.3375.2.1.2.9.2.2.1.2 | ColumnsysSelfPortDefPort | read-only | current | The default service allowed. '0' means allowing all services for the specified protocol(s). |
| 1.3.6.1.4.1.3375.2.1.2.9.2.2.1.3 | ColumnsysSelfPortDefAllowName | read-only | current | The allow name of self port default. |
| 1.3.6.1.4.1.3375.2.1.2.10 | NodesysSpanningTree | |||
| 1.3.6.1.4.1.3375.2.1.2.10.1 | NodesysStp | |||
| 1.3.6.1.4.1.3375.2.1.2.10.1.1 | ScalarsysStpNumber | read-only | current | The number of sysStp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2 | TablesysStpTable | not-accessible | current | A table containing information of STP instances of the BIGIP spanning tree. |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2.1 | RowsysStpEntry | not-accessible | current | Columns in the sysStp Table |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2.1.1 | ColumnsysStpInstanceId | read-only | current | The spanning tree instance ID, 0-4095. |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2.1.2 | ColumnsysStpPriority | read-only | current | The bridge priority of the specified spanning tree instance. Each bridge in a spanning tree instance has a priority value, which controls the topology of the s… |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2.1.3 | ColumnsysStpRootAddr | read-only | current | The MAC address of the root bridge. |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2.1.4 | ColumnsysStpRegionalRootAddr | read-only | current | The MAC address of the regional root bridge. |
| 1.3.6.1.4.1.3375.2.1.2.10.1.2.1.5 | ColumnsysStpName | read-only | current | STP name |
| 1.3.6.1.4.1.3375.2.1.2.10.2 | NodesysStpGlobals | |||
| 1.3.6.1.4.1.3375.2.1.2.10.2.1 | ScalarsysStpGlobalsMode | read-only | deprecated | Deprecated!. The STP mode. |
| 1.3.6.1.4.1.3375.2.1.2.10.2.2 | ScalarsysStpGlobalsFwdDelay | read-only | deprecated | Deprecated!. The forward delay parameter, which controls how long an interface was blocked from forwarding network traffic after a reconfiguration of the spann… |
| 1.3.6.1.4.1.3375.2.1.2.10.2.3 | ScalarsysStpGlobalsHelloTime | read-only | deprecated | Deprecated!. The hello time, which is the time interval in seconds between the periodic transmissions that communicate spanning tree information to the adjacen… |
| 1.3.6.1.4.1.3375.2.1.2.10.2.4 | ScalarsysStpGlobalsMaxAge | read-only | deprecated | Deprecated!. The maximum age parameter, which controls how long spanning tree information received from other bridges is considered valid. The default value is… |
| 1.3.6.1.4.1.3375.2.1.2.10.2.5 | ScalarsysStpGlobalsTransmitHold | read-only | deprecated | Deprecated!. The transmit hold count parameter, which is an absolute limit on the number of spanning tree protocol packets the BIG-IP may transmit on a port in… |
| 1.3.6.1.4.1.3375.2.1.2.10.2.6 | ScalarsysStpGlobalsMaxHops | read-only | deprecated | Deprecated!. The maximum hops an MSTP packet may travel before it is discarded. It's used only when the STP mode is MSTP. |
| 1.3.6.1.4.1.3375.2.1.2.10.2.7 | ScalarsysStpGlobalsIdentifier | read-only | deprecated | Deprecated!. The configuration identifier name in a spanning tree region, used to identify a group of adjacent bridges with identical configuration name, confi… |
| 1.3.6.1.4.1.3375.2.1.2.10.2.8 | ScalarsysStpGlobalsRevision | read-only | deprecated | Deprecated!. The configuration revision level of the MSTP configuration. It's used only when the STP mode is MSTP. |
| 1.3.6.1.4.1.3375.2.1.2.10.3 | NodesysStpInterfaceMbr | |||
| 1.3.6.1.4.1.3375.2.1.2.10.3.1 | ScalarsysStpInterfaceMbrNumber | read-only | current | The number of sysStpInterfaceMbr entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2 | TablesysStpInterfaceMbrTable | not-accessible | current | A table containing information of STP instances and their interfaces. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1 | RowsysStpInterfaceMbrEntry | not-accessible | current | Columns in the sysStpInterfaceMbr Table |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.1 | ColumnsysStpInterfaceMbrInstanceId | read-only | deprecated | Deprecated! A parent STP instance's ID. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.2 | ColumnsysStpInterfaceMbrName | read-only | current | The name of STP port object of the specified STP instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.3 | ColumnsysStpInterfaceMbrType | read-only | current | The type of the STP port object of the associated STP instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.4 | ColumnsysStpInterfaceMbrStateActive | read-only | current | The active state of the specified STP port object in the associated STP instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.5 | ColumnsysStpInterfaceMbrRole | read-only | current | The role of the specified STP port object in the associated STP instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.6 | ColumnsysStpInterfaceMbrPriority | read-only | current | The priority of the specified STP port object in the associated STP instance. This priority value influences which STP port is chosen to carry network traffic.… |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.7 | ColumnsysStpInterfaceMbrPathCost | read-only | current | The path cost for the specified STP port object in the associated STP instance. An interface path cost represents the relative cost of sending network traffic … |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.8 | ColumnsysStpInterfaceMbrStateRequested | read-only | current | The requested state of the specified STP port object in the associated STP instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.3.2.1.9 | ColumnsysStpInterfaceMbrInstanceName | read-only | current | Parent stp instance name |
| 1.3.6.1.4.1.3375.2.1.2.10.4 | NodesysStpVlanMbr | |||
| 1.3.6.1.4.1.3375.2.1.2.10.4.1 | ScalarsysStpVlanMbrNumber | read-only | current | The number of sysStpVlanMbr entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.4.2 | TablesysStpVlanMbrTable | not-accessible | current | A table containing information of STP instances and their VLAN members. |
| 1.3.6.1.4.1.3375.2.1.2.10.4.2.1 | RowsysStpVlanMbrEntry | not-accessible | current | Columns in the sysStpVlanMbr Table |
| 1.3.6.1.4.1.3375.2.1.2.10.4.2.1.1 | ColumnsysStpVlanMbrInstanceId | read-only | deprecated | Deprecated! A parent STP instance's ID. |
| 1.3.6.1.4.1.3375.2.1.2.10.4.2.1.2 | ColumnsysStpVlanMbrVlanVname | read-only | current | The name of a VLAN of the specified STP instance. This method may be used only in MSTP mode. In STP or RSTP mode, all VLANs automatically belong to spanning tr… |
| 1.3.6.1.4.1.3375.2.1.2.10.4.2.1.3 | ColumnsysStpVlanMbrStpName | read-only | current | Parent STP name |
| 1.3.6.1.4.1.3375.2.1.2.10.5 | NodesysStpBridgeStat | |||
| 1.3.6.1.4.1.3375.2.1.2.10.5.1 | ScalarsysStpBridgeStatResetStats | read-write | current | The action to reset resetable statistics data in sysStpBridgeStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be re… |
| 1.3.6.1.4.1.3375.2.1.2.10.5.2 | ScalarsysStpBridgeStatMode | read-only | current | The mode of STP bridge. |
| 1.3.6.1.4.1.3375.2.1.2.10.5.3 | ScalarsysStpBridgeStatFwdDelay | read-only | current | The forward delay in 256ths of a second. It controls how fast a port changes its spanning state when moving toward the Forwarding state. The value determines h… |
| 1.3.6.1.4.1.3375.2.1.2.10.5.4 | ScalarsysStpBridgeStatHelloTime | read-only | current | The hello time in 256ths of a second. It is the time interval between the periodic transmissions that communicate spanning tree information to the adjacent bri… |
| 1.3.6.1.4.1.3375.2.1.2.10.5.5 | ScalarsysStpBridgeStatMaxAge | read-only | current | The maximum age in 256ths of a second. It controls how long spanning tree information received from other bridges is considered valid. This is the actual value… |
| 1.3.6.1.4.1.3375.2.1.2.10.5.6 | ScalarsysStpBridgeStatBridgeFwdDelay | read-only | current | The bridge forward time (256ths). The value that all bridges use for ForwardDelay when this bridge is acting as the root. |
| 1.3.6.1.4.1.3375.2.1.2.10.5.7 | ScalarsysStpBridgeStatBridgeHelloTime | read-only | current | The bridge hello time (256ths). The value that all bridges use for HelloTime when this bridge is acting as the root. |
| 1.3.6.1.4.1.3375.2.1.2.10.5.8 | ScalarsysStpBridgeStatBridgeMaxAge | read-only | current | The bridge maximum age (256ths). The value that all bridges use for MaxAge when this bridge is acting as the root. |
| 1.3.6.1.4.1.3375.2.1.2.10.5.9 | ScalarsysStpBridgeStatTransmitHold | read-only | current | The transmit hold count in BPDUs (Bridge Protocol Data Units) per hello time. |
| 1.3.6.1.4.1.3375.2.1.2.10.5.10 | ScalarsysStpBridgeStatPathCost | read-only | current | CIST root bridge (external) path cost. CIST is Common and Internal Spanning Tree created by MSTP to represent the connectivity of the entire network. This is e… |
| 1.3.6.1.4.1.3375.2.1.2.10.5.11 | ScalarsysStpBridgeStatRootPrio | read-only | current | CIST root bridge priority. CIST is Common and Internal Spanning Tree created by MSTP to represent the connectivity of the entire network. This is equivalent to… |
| 1.3.6.1.4.1.3375.2.1.2.10.5.12 | ScalarsysStpBridgeStatRootAddr | read-only | current | CIST root bridge MAC address. CIST is Common and Internal Spanning Tree created by MSTP to represent the connectivity of the entire network. This is equivalent… |
| 1.3.6.1.4.1.3375.2.1.2.10.6 | NodesysStpBridgeTreeStat | |||
| 1.3.6.1.4.1.3375.2.1.2.10.6.1 | ScalarsysStpBridgeTreeStatNumber | read-only | current | The number of sysStpBridgeTreeStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2 | TablesysStpBridgeTreeStatTable | not-accessible | current | A table that contains port objects information of the BIGIP spanning tree. This is a part of sysStpBridgeStat and sysStpBrigeStatResetStat will reset data in t… |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1 | RowsysStpBridgeTreeStatEntry | not-accessible | current | Columns in the sysStpBridgeTreeStat Table |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.1 | ColumnsysStpBridgeTreeStatIndex | read-only | current | The index of the table that contains generic information about spanning bridge tree. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.2 | ColumnsysStpBridgeTreeStatInstanceId | read-only | current | The spanning tree instance ID. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.3 | ColumnsysStpBridgeTreeStatPriority | read-only | current | The bridge priority in the spanning tree. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.4 | ColumnsysStpBridgeTreeStatLastTc | read-only | current | The time of last topology change. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.5 | ColumnsysStpBridgeTreeStatTcCount | read-only | current | The count of topology changes. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.6 | ColumnsysStpBridgeTreeStatDesigRootPrio | read-only | current | The regional root bridge priority (MSTP). |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.7 | ColumnsysStpBridgeTreeStatDesigRootAddr | read-only | current | The regional root bridge address (MSTP). |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.8 | ColumnsysStpBridgeTreeStatInternalPathCost | read-only | current | The root internal path cost (MSTP). |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.9 | ColumnsysStpBridgeTreeStatRootPort | read-only | current | The root port interface name |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.10 | ColumnsysStpBridgeTreeStatRootPortNum | read-only | current | The root port number. |
| 1.3.6.1.4.1.3375.2.1.2.10.6.2.1.11 | ColumnsysStpBridgeTreeStatInstanceName | read-only | current | The spanning tree instance name. |
| 1.3.6.1.4.1.3375.2.1.2.10.7 | NodesysStpInterfaceStat | |||
| 1.3.6.1.4.1.3375.2.1.2.10.7.1 | ScalarsysStpInterfaceStatResetStats | read-write | current | The action to reset resetable statistics data in sysStpInterfaceStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be… |
| 1.3.6.1.4.1.3375.2.1.2.10.7.2 | ScalarsysStpInterfaceStatNumber | read-only | current | The number of sysStpInterfaceStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3 | TablesysStpInterfaceStatTable | not-accessible | current | The spanning tree information apply to the particular network interfaces or trunks. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1 | RowsysStpInterfaceStatEntry | not-accessible | current | Columns in the sysStpInterfaceStat Table |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.1 | ColumnsysStpInterfaceStatName | read-only | current | The name of an interface. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.2 | ColumnsysStpInterfaceStatPortNum | read-only | current | The STP port number. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.3 | ColumnsysStpInterfaceStatStpEnable | read-only | current | The state indicating whether STP is enable or not on port. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.4 | ColumnsysStpInterfaceStatPathCost | read-only | current | The external path cost of the specified port in the associated STP tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.5 | ColumnsysStpInterfaceStatRootCost | read-only | current | CIST (Common and Internal Spanning Tree in MSTP) root path cost. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.6 | ColumnsysStpInterfaceStatRootPrio | read-only | current | CIST (Common and Internal Spanning Tree in MSTP) root bridge priority. |
| 1.3.6.1.4.1.3375.2.1.2.10.7.3.1.7 | ColumnsysStpInterfaceStatRootAddr | read-only | current | CIST (Common and Internal Spanning Tree in MSTP) root bridge MAC address. |
| 1.3.6.1.4.1.3375.2.1.2.10.8 | NodesysStpInterfaceTreeStat | |||
| 1.3.6.1.4.1.3375.2.1.2.10.8.1 | ScalarsysStpInterfaceTreeStatNumber | read-only | current | The number of sysStpInterfaceTreeStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2 | TablesysStpInterfaceTreeStatTable | not-accessible | current | A table that contains port objects information of the spanning interface tree. This is a part of sysStpInterfaceStat and sysStpInterfaceStatResetStat will rese… |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1 | RowsysStpInterfaceTreeStatEntry | not-accessible | current | Columns in the sysStpInterfaceTreeStat Table |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.1 | ColumnsysStpInterfaceTreeStatName | read-only | current | The name of an interface which represents a port object in a spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.2 | ColumnsysStpInterfaceTreeStatIndex | read-only | current | The index of the table that contains the information of the specified port in a spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.3 | ColumnsysStpInterfaceTreeStatInstanceId | read-only | current | The ID of the STP instance which the specified port associated with. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.4 | ColumnsysStpInterfaceTreeStatPriority | read-only | current | The priority of the specified port in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.5 | ColumnsysStpInterfaceTreeStatState | read-only | current | The state in which the specified port is in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.6 | ColumnsysStpInterfaceTreeStatStatRole | read-only | current | The role of the port object in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.7 | ColumnsysStpInterfaceTreeStatDesigRootPrio | read-only | current | The regional root bridge priority component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.8 | ColumnsysStpInterfaceTreeStatDesigRootAddr | read-only | current | The regional root bridge MAC address component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.9 | ColumnsysStpInterfaceTreeStatDesigCost | read-only | current | The internal root path cost component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.10 | ColumnsysStpInterfaceTreeStatDesigBridgePrio | read-only | current | The designated bridge priority component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.11 | ColumnsysStpInterfaceTreeStatDesigBridgeAddr | read-only | current | The designated bridge MAC address component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.12 | ColumnsysStpInterfaceTreeStatDesigPortNum | read-only | current | The designated port identifier component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.13 | ColumnsysStpInterfaceTreeStatDesigPortPriority | read-only | current | The designated port priority component of the port's priority vector in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.14 | ColumnsysStpInterfaceTreeStatInternalPathCost | read-only | current | The internal path cost of the specified port in the associated spanning tree instance. This is only for MSTP. |
| 1.3.6.1.4.1.3375.2.1.2.10.8.2.1.15 | ColumnsysStpInterfaceTreeStatFwdTransitions | read-only | current | The count of transitions to forwarding state for the port in the associated spanning tree instance. |
| 1.3.6.1.4.1.3375.2.1.2.10.9 | NodesysStpGlobals2 | |||
| 1.3.6.1.4.1.3375.2.1.2.10.9.1 | ScalarsysStpGlobals2Number | read-only | current | The number of sysStpGlobals2 entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2 | TablesysStpGlobals2Table | not-accessible | current | The STP domain's global information. |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1 | RowsysStpGlobals2Entry | not-accessible | current | Columns in the sysStpGlobals2 Table |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.1 | ColumnsysStpGlobals2Mode | read-only | current | The STP mode. |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.2 | ColumnsysStpGlobals2FwdDelay | read-only | current | The forward delay parameter, which controls how long an interface was blocked from forwarding network traffic after a reconfiguration of the spanning tree topo… |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.3 | ColumnsysStpGlobals2HelloTime | read-only | current | The hello time, which is the time interval in seconds between the periodic transmissions that communicate spanning tree information to the adjacent bridges in … |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.4 | ColumnsysStpGlobals2MaxAge | read-only | current | The maximum age parameter, which controls how long spanning tree information received from other bridges is considered valid. The default value is 20 seconds, … |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.5 | ColumnsysStpGlobals2TransmitHold | read-only | current | The transmit hold count parameter, which is an absolute limit on the number of spanning tree protocol packets the BIG-IP may transmit on a port in any hello ti… |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.6 | ColumnsysStpGlobals2MaxHops | read-only | current | The maximum hops an MSTP packet may travel before it is discarded. It's used only when the STP mode is MSTP. |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.7 | ColumnsysStpGlobals2Identifier | read-only | current | The configuration identifier name in a spanning tree region, used to identify a group of adjacent bridges with identical configuration name, configuration revi… |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.8 | ColumnsysStpGlobals2Revision | read-only | current | The configuration revision level of the MSTP configuration. It's used only when the STP mode is MSTP. |
| 1.3.6.1.4.1.3375.2.1.2.10.9.2.1.9 | ColumnsysStpGlobals2Name | read-only | current | The name this stp global configuration. |
| 1.3.6.1.4.1.3375.2.1.2.11 | NodesysTransmission | |||
| 1.3.6.1.4.1.3375.2.1.2.11.1 | NodesysDot3Stat | |||
| 1.3.6.1.4.1.3375.2.1.2.11.1.1 | ScalarsysDot3StatResetStats | read-write | current | The action to reset resetable statistics data in sysDot3Stat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset i… |
| 1.3.6.1.4.1.3375.2.1.2.11.1.2 | ScalarsysDot3StatNumber | read-only | current | The number of sysDot3Stat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3 | TablesysDot3StatTable | not-accessible | current | A table that contains statistic information of collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1 | RowsysDot3StatEntry | not-accessible | current | Columns in the sysDot3Stat Table |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.1 | ColumnsysDot3StatName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.2 | ColumnsysDot3StatAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.3 | ColumnsysDot3StatFcsErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include… |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.4 | ColumnsysDot3StatSingleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.5 | ColumnsysDot3StatMultiCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.6 | ColumnsysDot3StatSqetestErrors | read-only | current | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR is set in accordance with the … |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.7 | ColumnsysDot3StatDeferredTx | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.8 | ColumnsysDot3StatLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.9 | ColumnsysDot3StatExcessiveCollisions | read-only | current | A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is ope… |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.10 | ColumnsysDot3StatIntmacTxErrors | read-only | current | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.11 | ColumnsysDot3StatCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.12 | ColumnsysDot3StatFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.13 | ColumnsysDot3StatIntmacRxErrors | read-only | current | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.14 | ColumnsysDot3StatSymbolErrors | read-only | current | This is a hardware counter that increments each time a valid receiver was present and at least 1 invalid data symbol was detected. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.15 | ColumnsysDot3StatDuplexStatus | read-only | current | The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.16 | ColumnsysDot3StatCollisionCount | read-only | current | The number of per-frame media collisions for which a particular collision histogram cell represents the frequency on a particular interface. |
| 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.17 | ColumnsysDot3StatCollisionFreq | read-only | current | A count of individual MAC frames for which the transmission (successful or otherwise) on a particular interface occurs after the frame has experienced exactly … |
| 1.3.6.1.4.1.3375.2.1.2.12 | NodesysTrunks | |||
| 1.3.6.1.4.1.3375.2.1.2.12.1 | NodesysTrunk | |||
| 1.3.6.1.4.1.3375.2.1.2.12.1.1 | ScalarsysTrunkNumber | read-only | current | The number of sysTrunk entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2 | TablesysTrunkTable | not-accessible | current | A table containing information of trunks. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1 | RowsysTrunkEntry | not-accessible | current | Columns in the sysTrunk Table |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.1 | ColumnsysTrunkName | read-only | current | The name of a trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.2 | ColumnsysTrunkStatus | read-only | current | The interface status. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.3 | ColumnsysTrunkAggAddr | read-only | current | The aggregator MAC address of the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.4 | ColumnsysTrunkCfgMbrCount | read-only | current | The number of configured members that the specified trunk has. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.5 | ColumnsysTrunkOperBw | read-only | current | The operational bandwidth in Mbps. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.6 | ColumnsysTrunkStpEnable | read-only | current | Whether STP is enabled for the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.7 | ColumnsysTrunkStpReset | read-only | current | Whether STP reset command is enabled for the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.8 | ColumnsysTrunkLacpEnabled | read-only | current | Whether LACP is enabled for the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.9 | ColumnsysTrunkActiveLacp | read-only | current | The active versus passive LACP on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.1.2.1.10 | ColumnsysTrunkShortTimeout | read-only | current | The short versus long timeout on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2 | NodesysTrunkStat | |||
| 1.3.6.1.4.1.3375.2.1.2.12.2.1 | ScalarsysTrunkStatResetStats | read-write | current | The action to reset resetable statistics data in sysTrunkStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset … |
| 1.3.6.1.4.1.3375.2.1.2.12.2.2 | ScalarsysTrunkStatNumber | read-only | current | The number of sysTrunkStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3 | TablesysTrunkStatTable | not-accessible | current | A table containing statistic information of trunks. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1 | RowsysTrunkStatEntry | not-accessible | current | Columns in the sysTrunkStat Table |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.1 | ColumnsysTrunkStatName | read-only | current | The name of a trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.2 | ColumnsysTrunkStatPktsIn | read-only | current | The number of packets received on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.3 | ColumnsysTrunkStatBytesIn | read-only | current | The number of bytes received on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.4 | ColumnsysTrunkStatPktsOut | read-only | current | The number of packets transmitted out of the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.5 | ColumnsysTrunkStatBytesOut | read-only | current | The number of bytes transmitted out of the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.6 | ColumnsysTrunkStatMcastIn | read-only | current | The number of multicast packets received on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.7 | ColumnsysTrunkStatMcastOut | read-only | current | The number of multicast packets transmitted out of the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.8 | ColumnsysTrunkStatErrorsIn | read-only | current | The number of received packets that are either undersized, oversized, or have FCS errors by the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.9 | ColumnsysTrunkStatErrorsOut | read-only | current | The number of excessive collisions, incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.10 | ColumnsysTrunkStatDropsIn | read-only | current | The number of packets dropped on ingress for various reasons on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.11 | ColumnsysTrunkStatDropsOut | read-only | current | The number of packets aged out or with excessive transmission delays due to multiple deferrals on the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.12 | ColumnsysTrunkStatCollisions | read-only | current | The number of collisions on the specified trunk, incremented by the number of collisions experienced during transmissions of a frame |
| 1.3.6.1.4.1.3375.2.1.2.12.3 | NodesysTrunkCfgMember | |||
| 1.3.6.1.4.1.3375.2.1.2.12.3.1 | ScalarsysTrunkCfgMemberNumber | read-only | current | The number of sysTrunkCfgMember entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.12.3.2 | TablesysTrunkCfgMemberTable | not-accessible | current | A table containing information of configured trunk members. |
| 1.3.6.1.4.1.3375.2.1.2.12.3.2.1 | RowsysTrunkCfgMemberEntry | not-accessible | current | Columns in the sysTrunkCfgMember Table |
| 1.3.6.1.4.1.3375.2.1.2.12.3.2.1.1 | ColumnsysTrunkCfgMemberTrunkName | read-only | current | The name of a trunk to which this member belongs. |
| 1.3.6.1.4.1.3375.2.1.2.12.3.2.1.2 | ColumnsysTrunkCfgMemberName | read-only | current | The name of a trunk member associated with the specified trunk. |
| 1.3.6.1.4.1.3375.2.1.2.13 | NodesysVlans | |||
| 1.3.6.1.4.1.3375.2.1.2.13.1 | NodesysVlan | |||
| 1.3.6.1.4.1.3375.2.1.2.13.1.1 | ScalarsysVlanNumber | read-only | current | The number of sysVlan entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2 | TablesysVlanTable | not-accessible | current | A table containing informations of VLANs. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1 | RowsysVlanEntry | not-accessible | current | Columns in the sysVlan Table |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.1 | ColumnsysVlanVname | read-only | current | The name of a VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.2 | ColumnsysVlanId | read-only | current | The VLAN tag numbers or IDs (valid range is 1-4095). |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.3 | ColumnsysVlanSpanningTree | read-only | current | The status of spanning tree domain is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.4 | ColumnsysVlanMacMasquerade | read-only | deprecated | Deprecated! Use traffic group MAC address instead. The MAC masquerade address for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.5 | ColumnsysVlanMacTrue | read-only | current | The true MAC address used by the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.6 | ColumnsysVlanSourceCheck | read-only | current | The source checking state for the specified VLAN. If it's true and auto lasthop is disabled, check that the source of the first packet of a connection is corre… |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.7 | ColumnsysVlanFailsafeEnabled | read-only | current | The failsafe state for the specified VLAN is enabled. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.8 | ColumnsysVlanMtu | read-only | current | The maximum transmission unit size of datagram which can be sent to the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.9 | ColumnsysVlanFailsafeTimeout | read-only | current | The failsafe timeouts for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.10 | ColumnsysVlanFailsafeAction | read-only | current | The failsafe action for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.11 | ColumnsysVlanMirrorHashPortEnable | read-only | current | The state whether to hash the port for VLAN mirroring for the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.1.2.1.12 | ColumnsysVlanLearnMode | read-only | current | The learn mode of the specified VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.2 | NodesysVlanMember | |||
| 1.3.6.1.4.1.3375.2.1.2.13.2.1 | ScalarsysVlanMemberNumber | read-only | current | The number of sysVlanMember entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.2.2 | TablesysVlanMemberTable | not-accessible | current | A table containing information of VLAN members. |
| 1.3.6.1.4.1.3375.2.1.2.13.2.2.1 | RowsysVlanMemberEntry | not-accessible | current | Columns in the sysVlanMember Table |
| 1.3.6.1.4.1.3375.2.1.2.13.2.2.1.1 | ColumnsysVlanMemberVmname | read-only | current | The name of a VLAN member. |
| 1.3.6.1.4.1.3375.2.1.2.13.2.2.1.2 | ColumnsysVlanMemberParentVname | read-only | current | The name of a VLAN to which the specified member belongs. |
| 1.3.6.1.4.1.3375.2.1.2.13.2.2.1.3 | ColumnsysVlanMemberTagged | read-only | current | The tagged/untagged state of the specified VLAN member. |
| 1.3.6.1.4.1.3375.2.1.2.13.2.2.1.4 | ColumnsysVlanMemberType | read-only | current | The type of the specified VLAN member. |
| 1.3.6.1.4.1.3375.2.1.2.13.3 | NodesysVlanGroup | |||
| 1.3.6.1.4.1.3375.2.1.2.13.3.1 | ScalarsysVlanGroupNumber | read-only | current | The number of sysVlanGroup entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2 | TablesysVlanGroupTable | not-accessible | current | A table containing information of VLAN groups. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1 | RowsysVlanGroupEntry | not-accessible | current | Columns in the sysVlanGroup Table |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.1 | ColumnsysVlanGroupName | read-only | current | The name of a VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.2 | ColumnsysVlanGroupVlanId | read-only | deprecated | Deprecated! The VLAN ID/tag numbers (valid range is 1-4095). |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.3 | ColumnsysVlanGroupMode | read-only | current | The transparency mode for the specified VLAN group. transparent - bridge with no modifications; translucent - toggle locally-modified bit of src MAC; opaque - … |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.4 | ColumnsysVlanGroupBridgeAllTraffic | read-only | current | The state to indicate whether to bridge non-IP traffic as well as IP traffic for the specified VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.5 | ColumnsysVlanGroupBridgeInStandby | read-only | current | The state to indicate whether to bridge while unit is in standby mode for the specified VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.6 | ColumnsysVlanGroupBridgeMulticast | read-only | current | The state to indicate whether to bridge multicast/broadcast traffic for the specified VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.7 | ColumnsysVlanGroupMacMasquerade | read-only | deprecated | Deprecated! Use traffic group MAC address instead. The MAC masquerade address for the specified VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.3.2.1.8 | ColumnsysVlanGroupMacTrue | read-only | current | The true MAC address used by the specified VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.4 | NodesysVlanGroupMbr | |||
| 1.3.6.1.4.1.3375.2.1.2.13.4.1 | ScalarsysVlanGroupMbrNumber | read-only | current | The number of sysVlanGroupMbr entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.4.2 | TablesysVlanGroupMbrTable | not-accessible | current | A table containing information of VLAN group's members. |
| 1.3.6.1.4.1.3375.2.1.2.13.4.2.1 | RowsysVlanGroupMbrEntry | not-accessible | current | Columns in the sysVlanGroupMbr Table |
| 1.3.6.1.4.1.3375.2.1.2.13.4.2.1.1 | ColumnsysVlanGroupMbrGroupName | read-only | current | The name of a VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.4.2.1.2 | ColumnsysVlanGroupMbrVlanName | read-only | current | The name of a VLAN group's member associated with the specified VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.5 | NodesysProxyExclusion | |||
| 1.3.6.1.4.1.3375.2.1.2.13.5.1 | ScalarsysProxyExclusionNumber | read-only | current | The number of sysProxyExclusion entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.5.2 | TablesysProxyExclusionTable | not-accessible | current | A table containing information of a list of IP's that proxy arp will ignore on VLAN groups. |
| 1.3.6.1.4.1.3375.2.1.2.13.5.2.1 | RowsysProxyExclusionEntry | not-accessible | current | Columns in the sysProxyExclusion Table |
| 1.3.6.1.4.1.3375.2.1.2.13.5.2.1.1 | ColumnsysProxyExclusionVlangroupName | read-only | current | The name of a VLAN group. |
| 1.3.6.1.4.1.3375.2.1.2.13.5.2.1.2 | ColumnsysProxyExclusionIpType | read-only | current | The IP address type of sysProxyExclusionIp |
| 1.3.6.1.4.1.3375.2.1.2.13.5.2.1.3 | ColumnsysProxyExclusionIp | read-only | current | The IP address ignored from the global proxy exclusion list for the specified VLAN group. It is interpreted within the context of a sysProxyExclusionIpType val… |
| 1.3.6.1.4.1.3375.2.1.2.13.6 | NodesysVlanStat | |||
| 1.3.6.1.4.1.3375.2.1.2.13.6.1 | ScalarsysVlanStatNumber | read-only | current | The number of sysVlanStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2 | TablesysVlanStatTable | not-accessible | current | Vlan statistics, sum of its interfaces interface_stat. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1 | RowsysVlanStatEntry | not-accessible | current | Columns in the sysVlanStat Table |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.1 | ColumnsysVlanStatVlanName | read-only | current | The name of a VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.2 | ColumnsysVlanStatPktsIn | read-only | current | The number of packets received on this vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.3 | ColumnsysVlanStatBytesIn | read-only | current | The number of bytes received on the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.4 | ColumnsysVlanStatPktsOut | read-only | current | The number of packets transmitted out of the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.5 | ColumnsysVlanStatBytesOut | read-only | current | The number of bytes transmitted out of the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.6 | ColumnsysVlanStatMcastIn | read-only | current | The number of multicast packets received on the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.7 | ColumnsysVlanStatMcastOut | read-only | current | The number of multicast packets transmitted out of the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.8 | ColumnsysVlanStatErrorsIn | read-only | current | The number of received packets that are either undersized, oversized, or have FCS errors by the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.9 | ColumnsysVlanStatErrorsOut | read-only | current | The number of excessive collisions, incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.10 | ColumnsysVlanStatDropsIn | read-only | current | The number of packets dropped on ingress for various reasons on the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.11 | ColumnsysVlanStatDropsOut | read-only | current | The number of packets aged out or with excessive transmission delays due to multiple deferrals on the specified vlan. |
| 1.3.6.1.4.1.3375.2.1.2.13.6.2.1.12 | ColumnsysVlanStatCollisions | read-only | current | The number of collisions on the specified vlan, incremented by the number of collisions experienced during transmissions of a frame |
| 1.3.6.1.4.1.3375.2.1.2.13.7 | NodesysVlanxStat | |||
| 1.3.6.1.4.1.3375.2.1.2.13.7.1 | ScalarsysVlanxStatNumber | read-only | current | The number of sysVlanxStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2 | TablesysVlanxStatTable | not-accessible | current | Vlan statistics, sum of its interfaces ifx_stat. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1 | RowsysVlanxStatEntry | not-accessible | current | Columns in the sysVlanxStat Table |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.1 | ColumnsysVlanxStatVlanName | read-only | current | The name of a VLAN. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.2 | ColumnsysVlanxStatInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.3 | ColumnsysVlanxStatInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.4 | ColumnsysVlanxStatOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.5 | ColumnsysVlanxStatOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.6 | ColumnsysVlanxStatHcInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.7 | ColumnsysVlanxStatHcInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.8 | ColumnsysVlanxStatHcInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.9 | ColumnsysVlanxStatHcInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.10 | ColumnsysVlanxStatHcOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.11 | ColumnsysVlanxStatHcOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.12 | ColumnsysVlanxStatHcOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.13 | ColumnsysVlanxStatHcOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.14 | ColumnsysVlanxStatHighSpeed | read-only | current | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.15 | ColumnsysVlanxStatConnectorPresent | read-only | current | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.3375.2.1.2.13.7.2.1.16 | ColumnsysVlanxStatCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are th… |
| 1.3.6.1.4.1.3375.2.1.2.14 | NodesysDevice | |||
| 1.3.6.1.4.1.3375.2.1.2.14.1 | NodesysSysDevice | |||
| 1.3.6.1.4.1.3375.2.1.2.14.1.1 | ScalarsysSysDeviceNumber | read-only | current | The number of sysSysDevice entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2 | TablesysSysDeviceTable | not-accessible | current | A table containing device information on devices connected to this machine |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1 | RowsysSysDeviceEntry | not-accessible | current | Columns in the sysSysDevice Table |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.1 | ColumnsysSysDeviceName | read-only | current | The unique device name |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.2 | ColumnsysSysDeviceMgmtIp | read-only | current | The ip used to connect to the device |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.3 | ColumnsysSysDeviceMgmtIpType | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.4 | ColumnsysSysDeviceHostname | read-only | current | The hostname of the device |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.5 | ColumnsysSysDeviceMirrorIp | read-only | current | The mirror ip address |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.6 | ColumnsysSysDeviceMirrorIpType | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.7 | ColumnsysSysDeviceMirrorSecondaryIp | read-only | current | The secondary mirror ip |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.8 | ColumnsysSysDeviceMirrorSecondaryIpType | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.9 | ColumnsysSysDeviceMulticastInterface | read-only | current | Multicast Interface |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.10 | ColumnsysSysDeviceMulticastAddr | read-only | current | Multicast Address |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.11 | ColumnsysSysDeviceMulticastAddrType | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.12 | ColumnsysSysDeviceMulticastPort | read-only | current | Multicast Port |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.13 | ColumnsysSysDeviceVersion | read-only | current | The product version |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.14 | ColumnsysSysDeviceProduct | read-only | current | The product installed on the device |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.15 | ColumnsysSysDeviceEdition | read-only | current | The edition of the product installed on the device |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.16 | ColumnsysSysDeviceMarketingName | read-only | current | The marketing name of the device |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.17 | ColumnsysSysDevicePlatformId | read-only | current | The platform name of the device |
| 1.3.6.1.4.1.3375.2.1.2.14.1.2.1.18 | ColumnsysSysDeviceChassisId | read-only | current | The unique chassis id of this device |
| 1.3.6.1.4.1.3375.2.1.2.14.2 | NodesysUnicastAddr | |||
| 1.3.6.1.4.1.3375.2.1.2.14.2.1 | ScalarsysUnicastAddrNumber | read-only | current | The number of sysUnicastAddr entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2 | TablesysUnicastAddrTable | not-accessible | current | A table that contains the unicast address/port combinations available on this device |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2.1 | RowsysUnicastAddrEntry | not-accessible | current | Columns in the sysUnicastAddr Table |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2.1.1 | ColumnsysUnicastAddrName | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2.1.2 | ColumnsysUnicastAddrIndex | read-only | current | Index of the unicast addr within this table |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2.1.3 | ColumnsysUnicastAddrSourceIp | read-only | current | Source unicast address for this device |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2.1.4 | ColumnsysUnicastAddrSourceIpType | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.2.2.1.5 | ColumnsysUnicastAddrSourcePort | read-only | current | Source port for unicast on this device |
| 1.3.6.1.4.1.3375.2.1.2.14.4 | NodesysSysDeviceActiveModules | |||
| 1.3.6.1.4.1.3375.2.1.2.14.4.1 | ScalarsysSysDeviceActiveModulesNumber | read-only | current | The number of sysSysDeviceActiveModules entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.14.4.2 | TablesysSysDeviceActiveModulesTable | not-accessible | current | A table containing a list of the active modules on the device. |
| 1.3.6.1.4.1.3375.2.1.2.14.4.2.1 | RowsysSysDeviceActiveModulesEntry | not-accessible | current | Columns in the sysSysDeviceActiveModules Table |
| 1.3.6.1.4.1.3375.2.1.2.14.4.2.1.1 | ColumnsysSysDeviceActiveModulesName | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.4.2.1.2 | ColumnsysSysDeviceActiveModulesIndex | read-only | current | Index of the unicast addr within this table |
| 1.3.6.1.4.1.3375.2.1.2.14.4.2.1.3 | ColumnsysSysDeviceActiveModulesModule | read-only | current | An active module on the device |
| 1.3.6.1.4.1.3375.2.1.2.14.5 | NodesysSysDeviceInactiveModules | |||
| 1.3.6.1.4.1.3375.2.1.2.14.5.1 | ScalarsysSysDeviceInactiveModulesNumber | read-only | current | The number of sysSysDeviceInactiveModules entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.14.5.2 | TablesysSysDeviceInactiveModulesTable | not-accessible | current | A table containing a list of the inactive modules on the device. |
| 1.3.6.1.4.1.3375.2.1.2.14.5.2.1 | RowsysSysDeviceInactiveModulesEntry | not-accessible | current | Columns in the sysSysDeviceInactiveModules Table |
| 1.3.6.1.4.1.3375.2.1.2.14.5.2.1.1 | ColumnsysSysDeviceInactiveModulesName | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.5.2.1.2 | ColumnsysSysDeviceInactiveModulesIndex | read-only | current | Index of the unicast addr within this table |
| 1.3.6.1.4.1.3375.2.1.2.14.5.2.1.3 | ColumnsysSysDeviceInactiveModulesModule | read-only | current | An inactive module on the device |
| 1.3.6.1.4.1.3375.2.1.2.14.6 | NodesysSysDeviceOptionalModules | |||
| 1.3.6.1.4.1.3375.2.1.2.14.6.1 | ScalarsysSysDeviceOptionalModulesNumber | read-only | current | The number of sysSysDeviceOptionalModules entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.14.6.2 | TablesysSysDeviceOptionalModulesTable | not-accessible | current | A table containing a list of the optional modules on the device. |
| 1.3.6.1.4.1.3375.2.1.2.14.6.2.1 | RowsysSysDeviceOptionalModulesEntry | not-accessible | current | Columns in the sysSysDeviceOptionalModules Table |
| 1.3.6.1.4.1.3375.2.1.2.14.6.2.1.1 | ColumnsysSysDeviceOptionalModulesName | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.6.2.1.2 | ColumnsysSysDeviceOptionalModulesIndex | read-only | current | Index of the unicast addr within this table |
| 1.3.6.1.4.1.3375.2.1.2.14.6.2.1.3 | ColumnsysSysDeviceOptionalModulesModule | read-only | current | An optional module on the device |
| 1.3.6.1.4.1.3375.2.1.2.14.7 | NodesysSysDeviceTimelimitedModules | |||
| 1.3.6.1.4.1.3375.2.1.2.14.7.1 | ScalarsysSysDeviceTimelimitedModulesNumber | read-only | current | The number of sysSysDeviceTimelimitedModules entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.14.7.2 | TablesysSysDeviceTimelimitedModulesTable | not-accessible | current | A table containing a list of the timelimited modules on the device. |
| 1.3.6.1.4.1.3375.2.1.2.14.7.2.1 | RowsysSysDeviceTimelimitedModulesEntry | not-accessible | current | Columns in the sysSysDeviceTimelimitedModules Table |
| 1.3.6.1.4.1.3375.2.1.2.14.7.2.1.1 | ColumnsysSysDeviceTimelimitedModulesName | read-only | current | |
| 1.3.6.1.4.1.3375.2.1.2.14.7.2.1.2 | ColumnsysSysDeviceTimelimitedModulesIndex | read-only | current | Index of the unicast addr within this table |
| 1.3.6.1.4.1.3375.2.1.2.14.7.2.1.3 | ColumnsysSysDeviceTimelimitedModulesModule | read-only | current | An timelimited module on the device |
| 1.3.6.1.4.1.3375.2.1.2.15 | NodesysTunnels | |||
| 1.3.6.1.4.1.3375.2.1.2.15.1 | NodesysFecStat | |||
| 1.3.6.1.4.1.3375.2.1.2.15.1.1 | ScalarsysFecStatResetStats | read-write | current | The action to reset resetable statistics data in sysFecStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset in… |
| 1.3.6.1.4.1.3375.2.1.2.15.1.2 | ScalarsysFecStatNumber | read-only | current | The number of sysFecStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3 | TablesysFecStatTable | not-accessible | current | A table containing statistics information about FEC tunnels. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1 | RowsysFecStatEntry | not-accessible | current | Columns in the sysFecStat Table |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.1 | ColumnsysFecStatName | read-only | current | The name of a FEC tunnel. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.2 | ColumnsysFecStatProfile | read-only | current | The name of a FEC profile. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.3 | ColumnsysFecStatOutRawPackets | read-only | current | The number of output raw packets. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.4 | ColumnsysFecStatOutRawBytes | read-only | current | The number of output raw bytes. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.5 | ColumnsysFecStatOutRdndPackets | read-only | current | The number of output redundant packets. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.6 | ColumnsysFecStatOutRdndBytes | read-only | current | The number of output redundant bytes. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.7 | ColumnsysFecStatInRawPackets | read-only | current | The number of input raw packets. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.8 | ColumnsysFecStatInRawBytes | read-only | current | The number of input raw bytes. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.9 | ColumnsysFecStatInRdndPackets | read-only | current | The number of input redundant packets. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.10 | ColumnsysFecStatInRdndBytes | read-only | current | The number of input redundant bytes. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.11 | ColumnsysFecStatInRdndLost | read-only | current | The number of input redundant packets lost. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.12 | ColumnsysFecStatInRawLost | read-only | current | The number of input raw packets lost. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.13 | ColumnsysFecStatRmtInRdndPackets | read-only | current | The number of remote side input redundant packets. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.14 | ColumnsysFecStatRmtInRdndLost | read-only | current | The number of remote side input redundant packets lost. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.15 | ColumnsysFecStatRmtInRawPackets | read-only | current | The number of remote side input raw packets. |
| 1.3.6.1.4.1.3375.2.1.2.15.1.3.1.16 | ColumnsysFecStatRmtInRawLost | read-only | current | The number of remote side input raw packets lost. |
| 1.3.6.1.4.1.3375.2.1.3 | NodesysPlatform | |||
| 1.3.6.1.4.1.3375.2.1.3.1 | NodesysCpu | |||
| 1.3.6.1.4.1.3375.2.1.3.1.1 | ScalarsysCpuNumber | read-only | deprecated | Deprecated!. The number of sysCpu entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.1.2 | TablesysCpuTable | not-accessible | deprecated | Deprecated! Replaced by sysCpuSensor table. A table containing information of CPU status on the system. |
| 1.3.6.1.4.1.3375.2.1.3.1.2.1 | RowsysCpuEntry | not-accessible | deprecated | Columns in the sysCpu Table |
| 1.3.6.1.4.1.3375.2.1.3.1.2.1.1 | ColumnsysCpuIndex | read-only | deprecated | Deprecated! Replaced by sysCpuSensor table. The CPU index on the system. |
| 1.3.6.1.4.1.3375.2.1.3.1.2.1.2 | ColumnsysCpuTemperature | read-only | deprecated | Deprecated! Replaced by sysCpuSensor table. The temperature of the indexed CPU on the system. This is only supported for the platform where the sensor data is … |
| 1.3.6.1.4.1.3375.2.1.3.1.2.1.3 | ColumnsysCpuFanSpeed | read-only | deprecated | Deprecated! Replaced by sysCpuSensor table. The fan speed (in RPM) of the indexed CPU on the system., This is only supported for the platform where the sensor … |
| 1.3.6.1.4.1.3375.2.1.3.1.2.1.4 | ColumnsysCpuName | read-only | deprecated | Deprecated! Replaced by sysCpuSensor table. Identifier for the CPU. |
| 1.3.6.1.4.1.3375.2.1.3.1.2.1.5 | ColumnsysCpuSlot | read-only | deprecated | Deprecated! Replaced by sysCpuSensor table. Chassis slot number, if applicable. |
| 1.3.6.1.4.1.3375.2.1.3.2 | NodesysChassis | |||
| 1.3.6.1.4.1.3375.2.1.3.2.1 | NodesysChassisFan | |||
| 1.3.6.1.4.1.3375.2.1.3.2.1.1 | ScalarsysChassisFanNumber | read-only | current | The number of sysChassisFan entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.2.1.2 | TablesysChassisFanTable | not-accessible | current | A table containing information of chassis fan status of the system. |
| 1.3.6.1.4.1.3375.2.1.3.2.1.2.1 | RowsysChassisFanEntry | not-accessible | current | Columns in the sysChassisFan Table |
| 1.3.6.1.4.1.3375.2.1.3.2.1.2.1.1 | ColumnsysChassisFanIndex | read-only | current | The index of a chassis fan on the system. It identifies a particular chassis fan. |
| 1.3.6.1.4.1.3375.2.1.3.2.1.2.1.2 | ColumnsysChassisFanStatus | read-only | current | The status of the indexed chassis fan on the system., This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.2.1.2.1.3 | ColumnsysChassisFanSpeed | read-only | current | The actual speed of the indexed chassis fan on the system. This is only supported for the platform where the actual fan speed data is available. '0' means fan … |
| 1.3.6.1.4.1.3375.2.1.3.2.2 | NodesysChassisPowerSupply | |||
| 1.3.6.1.4.1.3375.2.1.3.2.2.1 | ScalarsysChassisPowerSupplyNumber | read-only | current | The number of sysChassisPowerSupply entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.2.2.2 | TablesysChassisPowerSupplyTable | not-accessible | current | A table containing information of chassis power supply status of the system. |
| 1.3.6.1.4.1.3375.2.1.3.2.2.2.1 | RowsysChassisPowerSupplyEntry | not-accessible | current | Columns in the sysChassisPowerSupply Table |
| 1.3.6.1.4.1.3375.2.1.3.2.2.2.1.1 | ColumnsysChassisPowerSupplyIndex | read-only | current | The index of a power supply on the system. |
| 1.3.6.1.4.1.3375.2.1.3.2.2.2.1.2 | ColumnsysChassisPowerSupplyStatus | read-only | current | The status of the indexed power supply on the system., This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.2.3 | NodesysChassisTemp | |||
| 1.3.6.1.4.1.3375.2.1.3.2.3.1 | ScalarsysChassisTempNumber | read-only | current | The number of sysChassisTemp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.2.3.2 | TablesysChassisTempTable | not-accessible | current | A table containing information of chassis temperature of the system. |
| 1.3.6.1.4.1.3375.2.1.3.2.3.2.1 | RowsysChassisTempEntry | not-accessible | current | Columns in the sysChassisTemp Table |
| 1.3.6.1.4.1.3375.2.1.3.2.3.2.1.1 | ColumnsysChassisTempIndex | read-only | current | The index of a chassis temperature sensor on the system. It identifies a particular chassis temperature sensor, fan, etc. |
| 1.3.6.1.4.1.3375.2.1.3.2.3.2.1.2 | ColumnsysChassisTempTemperature | read-only | current | The chassis temperature (in Celsius) of the indexed sensor on the system., This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.2.4 | NodesysBladeTemp | |||
| 1.3.6.1.4.1.3375.2.1.3.2.4.1 | ScalarsysBladeTempNumber | read-only | current | The number of sysBladeTemp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.2.4.2 | TablesysBladeTempTable | not-accessible | current | A table containing information of blade temperature of the system. |
| 1.3.6.1.4.1.3375.2.1.3.2.4.2.1 | RowsysBladeTempEntry | not-accessible | current | Columns in the sysBladeTemp Table |
| 1.3.6.1.4.1.3375.2.1.3.2.4.2.1.1 | ColumnsysBladeTempIndex | read-only | current | The index of a chassis temperature sensor on the system. It identifies a particular chassis temperature sensor, fan, etc. |
| 1.3.6.1.4.1.3375.2.1.3.2.4.2.1.2 | ColumnsysBladeTempTemperature | read-only | current | The blade temperature (in Celsius) of the indexed sensor on the system., This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.2.4.2.1.3 | ColumnsysBladeTempLocation | read-only | current | The location for the temperature sensor. |
| 1.3.6.1.4.1.3375.2.1.3.2.4.2.1.4 | ColumnsysBladeTempSlot | read-only | current | The chassis slot number, if applicable. |
| 1.3.6.1.4.1.3375.2.1.3.2.5 | NodesysBladeVoltage | |||
| 1.3.6.1.4.1.3375.2.1.3.2.5.1 | ScalarsysBladeVoltageNumber | read-only | current | The number of sysBladeVoltage entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.2.5.2 | TablesysBladeVoltageTable | not-accessible | current | A table containing information of blade voltage of the system. |
| 1.3.6.1.4.1.3375.2.1.3.2.5.2.1 | RowsysBladeVoltageEntry | not-accessible | current | Columns in the sysBladeVoltage Table |
| 1.3.6.1.4.1.3375.2.1.3.2.5.2.1.1 | ColumnsysBladeVoltageIndex | read-only | current | The index of the voltage sensor. It identifies a particular blade voltage sensor, fan, etc. |
| 1.3.6.1.4.1.3375.2.1.3.2.5.2.1.2 | ColumnsysBladeVoltageVoltage | read-only | current | The blade voltage (in mV) of the indexed sensor on the system., This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.2.5.2.1.3 | ColumnsysBladeVoltageSlot | read-only | current | The chassis slot number, if applicable. |
| 1.3.6.1.4.1.3375.2.1.3.3 | NodesysGeneral | |||
| 1.3.6.1.4.1.3375.2.1.3.3.1 | ScalarsysGeneralHwName | read-only | current | The name of the system hardware model. |
| 1.3.6.1.4.1.3375.2.1.3.3.2 | ScalarsysGeneralHwNumber | read-only | deprecated | Deprecated! The name of the system model. This is replaced by platform.marketing_name |
| 1.3.6.1.4.1.3375.2.1.3.3.3 | ScalarsysGeneralChassisSerialNum | read-only | current | The system serial number. |
| 1.3.6.1.4.1.3375.2.1.3.4 | NodesysDeviceModelOIDs | |||
| 1.3.6.1.4.1.3375.2.1.3.4.1 | Nodebigip520 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.2 | Nodebigip540 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.3 | Nodebigip1000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.4 | Nodebigip1500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.5 | Nodebigip2400 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.6 | Nodebigip3400 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.7 | Nodebigip4100 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.8 | Nodebigip5100 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.9 | Nodebigip5110 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.10 | Nodebigip6400 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.11 | Nodebigip6800 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.12 | Nodebigip8400 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.13 | Nodebigip8800 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.14 | Nodeem3000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.15 | Nodewj300 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.16 | Nodewj400 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.17 | Nodewj500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.18 | Nodewj800 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.19 | NodebigipPb200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.20 | Nodebigip1600 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.21 | Nodebigip3600 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.22 | Nodebigip6900 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.23 | Nodebigip8900 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.24 | Nodebigip3900 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.25 | Nodebigip8950 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.26 | Nodeem4000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.27 | Nodebigip11050 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.28 | Nodeem500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.29 | Nodearx1000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.30 | Nodearx2000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.31 | Nodearx4000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.32 | Nodearx500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.33 | Nodebigip3410 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.34 | NodebigipPb100 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.35 | NodebigipPb100n | |||
| 1.3.6.1.4.1.3375.2.1.3.4.36 | Nodesam4300 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.37 | Nodefirepass1200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.38 | Nodefirepass4100 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.39 | Nodefirepass4300 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.40 | NodeswanWJ200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.41 | NodeTrafficShield4100 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.42 | Nodewa4500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.43 | NodebigipVirtualEdition | |||
| 1.3.6.1.4.1.3375.2.1.3.4.44 | Nodebigip11000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.45 | Nodebigip11050N | |||
| 1.3.6.1.4.1.3375.2.1.3.4.46 | NodebigipViprionB2100 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.47 | NodebigipViprionB4300 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.48 | NodebigipViprionC2400 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.49 | Nodearx1500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.50 | Nodearx2500 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.51 | Nodebigip11000F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.52 | Nodebigip11050F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.53 | Nodebigip6900F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.54 | Nodebigip6900N | |||
| 1.3.6.1.4.1.3375.2.1.3.4.55 | Nodebigip6900S | |||
| 1.3.6.1.4.1.3375.2.1.3.4.56 | Nodebigip8900F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.57 | Nodebigip8950S | |||
| 1.3.6.1.4.1.3375.2.1.3.4.58 | NodebigipPb200N | |||
| 1.3.6.1.4.1.3375.2.1.3.4.59 | Nodebigip4000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.60 | Nodebigip10000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.61 | Nodebigip2000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.62 | Nodebigip5000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.63 | Nodebigip7000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.64 | Nodebigip800 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.65 | NodebigipViprionB4300N | |||
| 1.3.6.1.4.1.3375.2.1.3.4.66 | Nodebigip10000F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.67 | Nodebigip10000S | |||
| 1.3.6.1.4.1.3375.2.1.3.4.68 | Nodebigip7000F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.69 | Nodebigip7000S | |||
| 1.3.6.1.4.1.3375.2.1.3.4.70 | NodebigipViprionB2250 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.71 | Nodebigip5050 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.72 | Nodebigip5250 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.73 | Nodebigip4050 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.74 | Nodebigip4250 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.75 | Nodebigip2050 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.76 | Nodebigip2250 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.77 | Nodebigip7050 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.78 | Nodebigip7250 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.79 | Nodebigip10050 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.80 | Nodebigip10250 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.81 | Nodebigip2200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.82 | Nodebigip4200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.83 | Nodebigip5200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.84 | Nodebigip7200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.85 | Nodebigip7200F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.86 | Nodebigip7200S | |||
| 1.3.6.1.4.1.3375.2.1.3.4.87 | Nodebigip10200 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.88 | Nodebigip10200F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.89 | Nodebigip10200S | |||
| 1.3.6.1.4.1.3375.2.1.3.4.90 | Nodebigiq7000 | |||
| 1.3.6.1.4.1.3375.2.1.3.4.91 | Nodebigip5250F | |||
| 1.3.6.1.4.1.3375.2.1.3.4.1000 | Nodeunknown | |||
| 1.3.6.1.4.1.3375.2.1.3.5 | NodesysPlatformInfo | |||
| 1.3.6.1.4.1.3375.2.1.3.5.1 | ScalarsysPlatformInfoName | read-only | current | The platform name |
| 1.3.6.1.4.1.3375.2.1.3.5.2 | ScalarsysPlatformInfoMarketingName | read-only | current | The system name used by marketing |
| 1.3.6.1.4.1.3375.2.1.3.6 | NodesysCpuSensor | |||
| 1.3.6.1.4.1.3375.2.1.3.6.1 | ScalarsysCpuSensorNumber | read-only | current | The number of sysCpuSensor entries in the table. |
| 1.3.6.1.4.1.3375.2.1.3.6.2 | TablesysCpuSensorTable | not-accessible | current | A table containing information of CPU sensor status on the system. |
| 1.3.6.1.4.1.3375.2.1.3.6.2.1 | RowsysCpuSensorEntry | not-accessible | current | Columns in the sysCpuSensor Table |
| 1.3.6.1.4.1.3375.2.1.3.6.2.1.1 | ColumnsysCpuSensorIndex | read-only | current | The CPU index on the system. |
| 1.3.6.1.4.1.3375.2.1.3.6.2.1.2 | ColumnsysCpuSensorTemperature | read-only | current | The temperature of the indexed CPU on the system. This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.6.2.1.3 | ColumnsysCpuSensorFanSpeed | read-only | current | The fan speed (in RPM) of the indexed CPU on the system., This is only supported for the platform where the sensor data is available. |
| 1.3.6.1.4.1.3375.2.1.3.6.2.1.4 | ColumnsysCpuSensorName | read-only | current | Identifier for the CPU. |
| 1.3.6.1.4.1.3375.2.1.3.6.2.1.5 | ColumnsysCpuSensorSlot | read-only | current | Chassis slot number, if applicable. |
| 1.3.6.1.4.1.3375.2.1.4 | NodesysProduct | |||
| 1.3.6.1.4.1.3375.2.1.4.1 | ScalarsysProductName | read-only | current | The product name. |
| 1.3.6.1.4.1.3375.2.1.4.2 | ScalarsysProductVersion | read-only | current | The product version. |
| 1.3.6.1.4.1.3375.2.1.4.3 | ScalarsysProductBuild | read-only | current | The product build number. |
| 1.3.6.1.4.1.3375.2.1.4.4 | ScalarsysProductEdition | read-only | current | The product edition. |
| 1.3.6.1.4.1.3375.2.1.4.5 | ScalarsysProductDate | read-only | current | The product build date. |
| 1.3.6.1.4.1.3375.2.1.4.6 | ScalarsysProductHotfix | read-only | deprecated | Deprecated! The 'Edition' field contains the hotfix number, if applicable |
| 1.3.6.1.4.1.3375.2.1.5 | NodesysSubMemory | |||
| 1.3.6.1.4.1.3375.2.1.5.1 | ScalarsysSubMemoryResetStats | read-write | deprecated | Deprecated!. The action to reset resetable statistics data in sysSubMemory. Setting this value to 1 will reset statistics data. Note, some statistics data may … |
| 1.3.6.1.4.1.3375.2.1.5.2 | ScalarsysSubMemoryNumber | read-only | deprecated | Deprecated!. The number of sysSubMemory entries in the table. |
| 1.3.6.1.4.1.3375.2.1.5.3 | TablesysSubMemoryTable | not-accessible | deprecated | Deprecated! A table containing information of the memory usage for each subsystem. |
| 1.3.6.1.4.1.3375.2.1.5.3.1 | RowsysSubMemoryEntry | not-accessible | deprecated | Columns in the sysSubMemory Table |
| 1.3.6.1.4.1.3375.2.1.5.3.1.1 | ColumnsysSubMemoryName | read-only | deprecated | Deprecated! The name of the subsystem. |
| 1.3.6.1.4.1.3375.2.1.5.3.1.2 | ColumnsysSubMemoryAllocated | read-only | deprecated | Deprecated! The number of bytes currently allocated for this subsystem. |
| 1.3.6.1.4.1.3375.2.1.5.3.1.3 | ColumnsysSubMemoryMaxAllocated | read-only | deprecated | Deprecated! The maximum number of bytes allocated for this subsystem. |
| 1.3.6.1.4.1.3375.2.1.5.3.1.4 | ColumnsysSubMemorySize | read-only | deprecated | Deprecated! The size in bytes of each object. |
| 1.3.6.1.4.1.3375.2.1.6 | NodesysSystem | |||
| 1.3.6.1.4.1.3375.2.1.6.1 | ScalarsysSystemName | read-only | current | The operating system name. |
| 1.3.6.1.4.1.3375.2.1.6.2 | ScalarsysSystemNodeName | read-only | current | The host name of the system on the network. |
| 1.3.6.1.4.1.3375.2.1.6.3 | ScalarsysSystemRelease | read-only | current | The current system release level. |
| 1.3.6.1.4.1.3375.2.1.6.4 | ScalarsysSystemVersion | read-only | current | The current system version level. |
| 1.3.6.1.4.1.3375.2.1.6.5 | ScalarsysSystemMachine | read-only | current | The name of the hardware type the system is running. |
| 1.3.6.1.4.1.3375.2.1.6.6 | ScalarsysSystemUptime | read-only | current | The system up time in 1/100 seconds since boot. |
| 1.3.6.1.4.1.3375.2.1.6.7 | ScalarsysSystemUptimeInSec | read-only | current | The system up time in seconds since boot. |
| 1.3.6.1.4.1.3375.2.1.7 | NodesysHostInfoStat | |||
| 1.3.6.1.4.1.3375.2.1.7.1 | NodesysHostMemory | |||
| 1.3.6.1.4.1.3375.2.1.7.1.1 | ScalarsysHostMemoryTotal | read-only | current | The total host memory in bytes. This is for a single host system. For multiple host system, please refer sysMultiHost table. |
| 1.3.6.1.4.1.3375.2.1.7.1.2 | ScalarsysHostMemoryUsed | read-only | current | The host memory in bytes currently in use. This is for a single host system. For multiple host system, please refer sysMultiHost table. |
| 1.3.6.1.4.1.3375.2.1.7.2 | NodesysHostCpu | |||
| 1.3.6.1.4.1.3375.2.1.7.2.1 | ScalarsysHostCpuNumber | read-only | deprecated | Deprecated!. The number of sysHostCpu entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.2.2 | TablesysHostCpuTable | not-accessible | deprecated | Deprecated! Replaced by sysMultiHostCpu table. A table containing entries of system CPU usage information. This is for a single host system. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1 | RowsysHostCpuEntry | not-accessible | deprecated | Columns in the sysHostCpu Table |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.1 | ColumnsysHostCpuIndex | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The index of a CPU in this CPU table. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.2 | ColumnsysHostCpuId | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The ID of a processor. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.3 | ColumnsysHostCpuUser | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor in user context. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.4 | ColumnsysHostCpuNice | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor running niced processes. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.5 | ColumnsysHostCpuSystem | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor servicing system calls. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.6 | ColumnsysHostCpuIdle | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor doing nothing. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.7 | ColumnsysHostCpuIrq | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor servicing hardware interrupts. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.8 | ColumnsysHostCpuSoftirq | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor servicing soft interrupts. |
| 1.3.6.1.4.1.3375.2.1.7.2.2.1.9 | ColumnsysHostCpuIowait | read-only | deprecated | Deprecated! Replaced by sysMultiHostCpu table. The time spent by the specified processor waiting for external I/O to complete. |
| 1.3.6.1.4.1.3375.2.1.7.3 | NodesysHostDisk | |||
| 1.3.6.1.4.1.3375.2.1.7.3.1 | ScalarsysHostDiskNumber | read-only | current | The number of sysHostDisk entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.3.2 | TablesysHostDiskTable | not-accessible | current | A table containing entries of system disk usage information. |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1 | RowsysHostDiskEntry | not-accessible | current | Columns in the sysHostDisk Table |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1.1 | ColumnsysHostDiskPartition | read-only | current | The name of a disk partition. |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1.2 | ColumnsysHostDiskBlockSize | read-only | current | The number of bytes in the specified partition. |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1.3 | ColumnsysHostDiskTotalBlocks | read-only | current | The number of total blocks in the specified partition. |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1.4 | ColumnsysHostDiskFreeBlocks | read-only | current | The number of free blocks in the specified partition. |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1.5 | ColumnsysHostDiskTotalNodes | read-only | current | The number of total file nodes in the specified partition. |
| 1.3.6.1.4.1.3375.2.1.7.3.2.1.6 | ColumnsysHostDiskFreeNodes | read-only | current | The number of free file nodes in the specified partition. |
| 1.3.6.1.4.1.3375.2.1.7.4 | NodesysMultiHost | |||
| 1.3.6.1.4.1.3375.2.1.7.4.1 | ScalarsysMultiHostNumber | read-only | current | The number of sysMultiHost entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.4.2 | TablesysMultiHostTable | not-accessible | current | A table containing system statistics information of the host, such as memory usage, cpu type, etc. |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1 | RowsysMultiHostEntry | not-accessible | current | Columns in the sysMultiHost Table |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1.1 | ColumnsysMultiHostHostId | read-only | current | The host identifier. |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1.2 | ColumnsysMultiHostTotal | read-only | current | The total host memory in bytes for the specified host. |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1.3 | ColumnsysMultiHostUsed | read-only | current | The host memory in bytes currently in use for the specified host. |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1.4 | ColumnsysMultiHostMode | read-only | deprecated | Deprecated! This used to reference mode processor was running in. |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1.5 | ColumnsysMultiHostCpuCount | read-only | current | The number of CPUs for the specified host. |
| 1.3.6.1.4.1.3375.2.1.7.4.2.1.6 | ColumnsysMultiHostActiveCpuCount | read-only | current | The number of active CPUs for the specified host. |
| 1.3.6.1.4.1.3375.2.1.7.5 | NodesysMultiHostCpu | |||
| 1.3.6.1.4.1.3375.2.1.7.5.1 | ScalarsysMultiHostCpuNumber | read-only | current | The number of sysMultiHostCpu entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.5.2 | TablesysMultiHostCpuTable | not-accessible | current | A table containing entries of system CPU usage information for a system. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1 | RowsysMultiHostCpuEntry | not-accessible | current | Columns in the sysMultiHostCpu Table |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.1 | ColumnsysMultiHostCpuHostId | read-only | current | A host identifier on the system. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.2 | ColumnsysMultiHostCpuIndex | read-only | current | The index of the table that contains the information of the specified processor of the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.3 | ColumnsysMultiHostCpuId | read-only | current | The ID of the specified processor of the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.4 | ColumnsysMultiHostCpuUser | read-only | current | The time spent by the specified processor in user context for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.5 | ColumnsysMultiHostCpuNice | read-only | current | The time spent by the specified processor running niced processes for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.6 | ColumnsysMultiHostCpuSystem | read-only | current | The time spent by the specified processor servicing system calls for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.7 | ColumnsysMultiHostCpuIdle | read-only | current | The time spent by the specified processor doing nothing for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.8 | ColumnsysMultiHostCpuIrq | read-only | current | The time spent by the specified processor servicing hardware interrupts for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.9 | ColumnsysMultiHostCpuSoftirq | read-only | current | The time spent by the specified processor servicing soft interrupts for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.10 | ColumnsysMultiHostCpuIowait | read-only | current | The time spent by the specified processor waiting for external I/O to complete for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.11 | ColumnsysMultiHostCpuUsageRatio | read-only | current | This is usage ratio of CPU for the associated host. This value indicates the present cpu usage. For usage computed over specific intervals, please use the spec… |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.12 | ColumnsysMultiHostCpuUser5s | read-only | current | The average time spent by the specified processor in user context for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.13 | ColumnsysMultiHostCpuNice5s | read-only | current | The average time spent by the specified processor running niced processes for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.14 | ColumnsysMultiHostCpuSystem5s | read-only | current | The average time spent by the specified processor servicing system calls for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.15 | ColumnsysMultiHostCpuIdle5s | read-only | current | The average time spent by the specified processor doing nothing for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.16 | ColumnsysMultiHostCpuIrq5s | read-only | current | The average time spent by the specified processor servicing hardware interrupts for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.17 | ColumnsysMultiHostCpuSoftirq5s | read-only | current | The average time spent by the specified processor servicing soft interrupts for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.18 | ColumnsysMultiHostCpuIowait5s | read-only | current | The average time spent by the specified processor waiting for external I/O to complete for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.19 | ColumnsysMultiHostCpuUsageRatio5s | read-only | current | This is average usage ratio of CPU for the associated host in the last five seconds. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas… |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.20 | ColumnsysMultiHostCpuUser1m | read-only | current | The average time spent by the specified processor in user context for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.21 | ColumnsysMultiHostCpuNice1m | read-only | current | The average time spent by the specified processor running niced processes for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.22 | ColumnsysMultiHostCpuSystem1m | read-only | current | The average time spent by the specified processor servicing system calls for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.23 | ColumnsysMultiHostCpuIdle1m | read-only | current | The average time spent by the specified processor doing nothing for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.24 | ColumnsysMultiHostCpuIrq1m | read-only | current | The average time spent by the specified processor servicing hardware interrupts for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.25 | ColumnsysMultiHostCpuSoftirq1m | read-only | current | The average time spent by the specified processor servicing soft interrupts for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.26 | ColumnsysMultiHostCpuIowait1m | read-only | current | The average time spent by the specified processor waiting for external I/O to complete for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.27 | ColumnsysMultiHostCpuUsageRatio1m | read-only | current | This is average usage ratio of CPU for the associated host in the last one minute. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas o… |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.28 | ColumnsysMultiHostCpuUser5m | read-only | current | The average time spent by the specified processor in user context for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.29 | ColumnsysMultiHostCpuNice5m | read-only | current | The average time spent by the specified processor running niced processes for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.30 | ColumnsysMultiHostCpuSystem5m | read-only | current | The average time spent by the specified processor servicing system calls for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.31 | ColumnsysMultiHostCpuIdle5m | read-only | current | The average time spent by the specified processor doing nothing for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.32 | ColumnsysMultiHostCpuIrq5m | read-only | current | The average time spent by the specified processor servicing hardware interrupts for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.33 | ColumnsysMultiHostCpuSoftirq5m | read-only | current | The average time spent by the specified processor servicing soft interrupts for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.34 | ColumnsysMultiHostCpuIowait5m | read-only | current | The average time spent by the specified processor waiting for external I/O to complete for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.35 | ColumnsysMultiHostCpuUsageRatio5m | read-only | current | This is average usage ratio of CPU for the associated host in the last five minutes. It is calculated by (sum of deltas for user, niced, system)/(sum of deltas… |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.36 | ColumnsysMultiHostCpuStolen | read-only | current | The time 'stolen' from the specified processor for the associated host. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.37 | ColumnsysMultiHostCpuStolen5s | read-only | current | The average time 'stolen' from the specified processor for the associated host in the last five seconds. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.38 | ColumnsysMultiHostCpuStolen1m | read-only | current | The average time 'stolen' from the specified processor for the associated host in the last one minute. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.39 | ColumnsysMultiHostCpuStolen5m | read-only | current | The average time 'stolen' from the specified processor for the associated host in the last five minutes. |
| 1.3.6.1.4.1.3375.2.1.7.5.2.1.40 | ColumnsysMultiHostCpuSlotId | read-only | current | If this is an appliance, the slot is 0. If this is in a cluster, the slot is the position in the cluster (1-based) |
| 1.3.6.1.4.1.3375.2.1.7.6 | NodesysLogicalDisk | |||
| 1.3.6.1.4.1.3375.2.1.7.6.1 | ScalarsysLogicalDiskNumber | read-only | current | The number of sysLogicalDisk entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.6.2 | TablesysLogicalDiskTable | not-accessible | current | Logical disks status |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1 | RowsysLogicalDiskEntry | not-accessible | current | Columns in the sysLogicalDisk Table |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1.1 | ColumnsysLogicalDiskSlotId | read-only | current | The slot ID. |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1.2 | ColumnsysLogicalDiskName | read-only | current | The logical disk name. |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1.3 | ColumnsysLogicalDiskDevname | read-only | current | The logical disk device name. |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1.4 | ColumnsysLogicalDiskMedia | read-only | current | The logical disk media. |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1.5 | ColumnsysLogicalDiskSize | read-only | current | The size of logical disk |
| 1.3.6.1.4.1.3375.2.1.7.6.2.1.6 | ColumnsysLogicalDiskFormat | read-only | current | The logical disk formate. |
| 1.3.6.1.4.1.3375.2.1.7.7 | NodesysPhysicalDisk | |||
| 1.3.6.1.4.1.3375.2.1.7.7.1 | ScalarsysPhysicalDiskNumber | read-only | current | The number of sysPhysicalDisk entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.7.2 | TablesysPhysicalDiskTable | not-accessible | current | Physical disk status |
| 1.3.6.1.4.1.3375.2.1.7.7.2.1 | RowsysPhysicalDiskEntry | not-accessible | current | Columns in the sysPhysicalDisk Table |
| 1.3.6.1.4.1.3375.2.1.7.7.2.1.1 | ColumnsysPhysicalDiskSerialNumber | read-only | current | The serial number of physical disk |
| 1.3.6.1.4.1.3375.2.1.7.7.2.1.2 | ColumnsysPhysicalDiskSlotId | read-only | current | The slot ID. |
| 1.3.6.1.4.1.3375.2.1.7.7.2.1.3 | ColumnsysPhysicalDiskName | read-only | current | The physical disk name. |
| 1.3.6.1.4.1.3375.2.1.7.7.2.1.4 | ColumnsysPhysicalDiskIsArrayMember | read-only | current | If the physical disk is the member of an array. Default is false |
| 1.3.6.1.4.1.3375.2.1.7.7.2.1.5 | ColumnsysPhysicalDiskArrayStatus | read-only | current | The physical disk array status |
| 1.3.6.1.4.1.3375.2.1.7.8 | NodesysDiskBay | |||
| 1.3.6.1.4.1.3375.2.1.7.8.1 | ScalarsysDiskBayNumber | read-only | current | The number of sysDiskBay entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.8.2 | TablesysDiskBayTable | not-accessible | current | Disk bay status |
| 1.3.6.1.4.1.3375.2.1.7.8.2.1 | RowsysDiskBayEntry | not-accessible | current | Columns in the sysDiskBay Table |
| 1.3.6.1.4.1.3375.2.1.7.8.2.1.1 | ColumnsysDiskBayId | read-only | current | The disk bay ID. |
| 1.3.6.1.4.1.3375.2.1.7.8.2.1.2 | ColumnsysDiskBayDiskSerialNumber | read-only | current | The serial number of physical disk |
| 1.3.6.1.4.1.3375.2.1.7.9 | NodesysLogicalDiskMembers | |||
| 1.3.6.1.4.1.3375.2.1.7.9.1 | ScalarsysLogicalDiskMembersNumber | read-only | current | The number of sysLogicalDiskMembers entries in the table. |
| 1.3.6.1.4.1.3375.2.1.7.9.2 | TablesysLogicalDiskMembersTable | not-accessible | current | Logical disk members status |
| 1.3.6.1.4.1.3375.2.1.7.9.2.1 | RowsysLogicalDiskMembersEntry | not-accessible | current | Columns in the sysLogicalDiskMembers Table |
| 1.3.6.1.4.1.3375.2.1.7.9.2.1.1 | ColumnsysLogicalDiskMembersDevname | read-only | current | device name of logical disk members |
| 1.3.6.1.4.1.3375.2.1.7.9.2.1.2 | ColumnsysLogicalDiskMembersSerialNumber | read-only | current | The serial number of logical disk members |
| 1.3.6.1.4.1.3375.2.1.7.9.2.1.3 | ColumnsysLogicalDiskMembersSlotId | read-only | current | The slot ID of logical disk members. |
| 1.3.6.1.4.1.3375.2.1.8 | NodesysSystemStat | |||
| 1.3.6.1.4.1.3375.2.1.8.1 | NodesysPvaStat | |||
| 1.3.6.1.4.1.3375.2.1.8.1.1 | ScalarsysPvaStatResetStats | read-write | current | The action to reset resetable statistics data in sysPvaStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset in… |
| 1.3.6.1.4.1.3375.2.1.8.1.2 | ScalarsysPvaStatNumber | read-only | current | The number of sysPvaStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.8.1.3 | TablesysPvaStatTable | not-accessible | current | A table containing statistics information of the Packet Velocity Acceleration Engine (PVA) on the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1 | RowsysPvaStatEntry | not-accessible | current | Columns in the sysPvaStat Table |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.1 | ColumnsysPvaStatPvaId | read-only | current | The ID of PVA (Packet Velocity Acceleration Engine) on the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.2 | ColumnsysPvaStatClientPktsIn | read-only | current | The number of hardware accelerated packets received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.3 | ColumnsysPvaStatClientBytesIn | read-only | current | The number of hardware accelerated bytes received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.4 | ColumnsysPvaStatClientPktsOut | read-only | current | The number of hardware accelerated packets sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.5 | ColumnsysPvaStatClientBytesOut | read-only | current | The number of hardware accelerated bytes sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.6 | ColumnsysPvaStatClientMaxConns | read-only | current | The maximum hardware accelerated connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.7 | ColumnsysPvaStatClientTotConns | read-only | current | The total hardware accelerated connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.8 | ColumnsysPvaStatClientCurConns | read-only | current | The current hardware accelerated connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.9 | ColumnsysPvaStatServerPktsIn | read-only | current | The number of hardware accelerated packets received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.10 | ColumnsysPvaStatServerBytesIn | read-only | current | The number of hardware accelerated bytes received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.11 | ColumnsysPvaStatServerPktsOut | read-only | current | The number of hardware accelerated packets sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.12 | ColumnsysPvaStatServerBytesOut | read-only | current | The number of hardware accelerated bytes sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.13 | ColumnsysPvaStatServerMaxConns | read-only | current | The maximum hardware accelerated connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.14 | ColumnsysPvaStatServerTotConns | read-only | current | The total hardware accelerated connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.15 | ColumnsysPvaStatServerCurConns | read-only | current | The current hardware accelerated connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.16 | ColumnsysPvaStatTotAssistConns | read-only | current | The total number of the partially hardware accelerated connections on the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.17 | ColumnsysPvaStatCurAssistConns | read-only | current | The current number of the partially hardware accelerated connections on the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.18 | ColumnsysPvaStatHardSyncookieGen | read-only | current | The number of hardware SYN cookies are generated on the system. |
| 1.3.6.1.4.1.3375.2.1.8.1.3.1.19 | ColumnsysPvaStatHardSyncookieDet | read-only | current | The number of hardware SYN cookies are detected on the system. |
| 1.3.6.1.4.1.3375.2.1.8.2 | NodesysTmmStat | |||
| 1.3.6.1.4.1.3375.2.1.8.2.1 | ScalarsysTmmStatResetStats | read-write | current | The action to reset resetable statistics data in sysTmmStat. Setting this value to 1 will reset statistics data. Note, some statistics data may not be reset in… |
| 1.3.6.1.4.1.3375.2.1.8.2.2 | ScalarsysTmmStatNumber | read-only | current | The number of sysTmmStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.8.2.3 | TablesysTmmStatTable | not-accessible | current | A table containing statistics information of the Traffic Management Module (TMM) on the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1 | RowsysTmmStatEntry | not-accessible | current | Columns in the sysTmmStat Table |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.1 | ColumnsysTmmStatTmmId | read-only | current | The key for TMM (Traffic Management Module) access on the system. This is a concatenation of the slot and cpuid. ie: '1.0'. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.2 | ColumnsysTmmStatTmmPid | read-only | current | The process ID of the specified TMM (Traffic Management Module) on the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.3 | ColumnsysTmmStatCpu | read-only | current | An index of CPU on which the specified TMM (Traffic Management Module) is running on the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.4 | ColumnsysTmmStatTmid | read-only | current | An index of a running TMM (Traffic Management Module) on the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.5 | ColumnsysTmmStatNpus | read-only | current | The number of TMMs (Traffic Management Module) on the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.6 | ColumnsysTmmStatClientPktsIn | read-only | current | The number of packets received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.7 | ColumnsysTmmStatClientBytesIn | read-only | current | The number of bytes received by the system from client-side. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.8 | ColumnsysTmmStatClientPktsOut | read-only | current | The number of packets sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.9 | ColumnsysTmmStatClientBytesOut | read-only | current | The number of bytes sent to client-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.10 | ColumnsysTmmStatClientMaxConns | read-only | current | The maximum connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.11 | ColumnsysTmmStatClientTotConns | read-only | current | The total connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.12 | ColumnsysTmmStatClientCurConns | read-only | current | The current connections from client-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.13 | ColumnsysTmmStatServerPktsIn | read-only | current | The number of packets received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.14 | ColumnsysTmmStatServerBytesIn | read-only | current | The number of bytes received by the system from server-side. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.15 | ColumnsysTmmStatServerPktsOut | read-only | current | The number of packets sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.16 | ColumnsysTmmStatServerBytesOut | read-only | current | The number of bytes sent to server-side from the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.17 | ColumnsysTmmStatServerMaxConns | read-only | current | The maximum connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.18 | ColumnsysTmmStatServerTotConns | read-only | current | The total connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.19 | ColumnsysTmmStatServerCurConns | read-only | current | The current connections from server-side to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.20 | ColumnsysTmmStatMaintenanceModeDeny | read-only | current | The connection requests rejected because the virtual server was in maintenance mode. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.21 | ColumnsysTmmStatMaxConnVirtualAddrDeny | read-only | current | The connection requests rejected because they exceeded the connection limit for a virtual server address. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.22 | ColumnsysTmmStatMaxConnVirtualPathDeny | read-only | current | The connection requests rejected because they exceeded the connection limit for a virtual server (IP:port). |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.23 | ColumnsysTmmStatVirtualServerNonSynDeny | read-only | current | The packets that are not connection requests and are destined for a virtual server that has no connection for the client address. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.24 | ColumnsysTmmStatNoHandlerDeny | read-only | current | The incoming packets that could not be processed by a a virtual server, NAT, or SNAT. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.25 | ColumnsysTmmStatLicenseDeny | read-only | current | The packets which were dropped due to exceeding licensing limitations. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.26 | ColumnsysTmmStatCmpConnRedirected | read-only | current | The connections that were redirected to a different TMM in the cluster. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.27 | ColumnsysTmmStatConnectionMemoryErrors | read-only | current | The connections could not be created because memory was not available. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.28 | ColumnsysTmmStatTmTotalCycles | read-only | deprecated | Deprecated! Please use the provided tmm usage ratios. Traffic management CPU usage. The total cycles spent in traffic management. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.29 | ColumnsysTmmStatTmIdleCycles | read-only | deprecated | Deprecated! Please use the provided tmm usage ratios. Traffic management CPU usage. The cycles spent polling with no traffic. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.30 | ColumnsysTmmStatTmSleepCycles | read-only | deprecated | Deprecated! Please use the provided tmm usage ratios. Traffic management CPU usage. The cycles yielded (uniprocessor only). |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.31 | ColumnsysTmmStatMemoryTotal | read-only | current | The total memory available in bytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.32 | ColumnsysTmmStatMemoryUsed | read-only | current | The memory in use in bytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.33 | ColumnsysTmmStatDroppedPackets | read-only | current | The total dropped packets. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.34 | ColumnsysTmmStatIncomingPacketErrors | read-only | current | The total incoming packet errors for the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.35 | ColumnsysTmmStatOutgoingPacketErrors | read-only | current | The total outgoing packet errors for the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.36 | ColumnsysTmmStatHttpRequests | read-only | current | The total number of HTTP requests to the system. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.37 | ColumnsysTmmStatTmUsageRatio5s | read-only | current | The percentage of time the TMM was busy over the last 5 seconds. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.38 | ColumnsysTmmStatTmUsageRatio1m | read-only | current | The percentage of time the TMM was busy over the last 1 minute. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.39 | ColumnsysTmmStatTmUsageRatio5m | read-only | current | The percentage of time the TMM was busy over the last 5 minutes. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.40 | ColumnsysTmmStatSlotId | read-only | current | The index of the slot where the TMM is running. |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.41 | ColumnsysTmmStatMemoryTotalKb | read-only | current | The total memory available in Kilobytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.8.2.3.1.42 | ColumnsysTmmStatMemoryUsedKb | read-only | current | The memory in use in Kilobytes for TMM (Traffic Management Module). |
| 1.3.6.1.4.1.3375.2.1.9 | NodesysSoftware | |||
| 1.3.6.1.4.1.3375.2.1.9.1 | NodesysSoftwareVolume | |||
| 1.3.6.1.4.1.3375.2.1.9.1.1 | ScalarsysSwVolumeNumber | read-only | current | The number of sysSoftwareVolume entries in the table. |
| 1.3.6.1.4.1.3375.2.1.9.1.2 | TablesysSwVolumeTable | not-accessible | current | A table containing software volume information on the system. |
| 1.3.6.1.4.1.3375.2.1.9.1.2.1 | RowsysSwVolumeEntry | not-accessible | current | Columns in the sysSwVolume Table |
| 1.3.6.1.4.1.3375.2.1.9.1.2.1.1 | ColumnsysSwVolumeSlotId | read-only | current | The slot ID. |
| 1.3.6.1.4.1.3375.2.1.9.1.2.1.2 | ColumnsysSwVolumeName | read-only | current | The harddisk name. |
| 1.3.6.1.4.1.3375.2.1.9.1.2.1.3 | ColumnsysSwVolumeSize | read-only | current | The space of the specified harddisk. |
| 1.3.6.1.4.1.3375.2.1.9.1.2.1.4 | ColumnsysSwVolumeActive | read-only | current | The state indicating whether or not the specified slot is active. |
| 1.3.6.1.4.1.3375.2.1.9.2 | NodesysSoftwareImage | |||
| 1.3.6.1.4.1.3375.2.1.9.2.1 | ScalarsysSwImageNumber | read-only | current | The number of sysSoftwareImage entries in the table. |
| 1.3.6.1.4.1.3375.2.1.9.2.2 | TablesysSwImageTable | not-accessible | current | A table containing software image information on the system. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1 | RowsysSwImageEntry | not-accessible | current | Columns in the sysSwImage Table |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.1 | ColumnsysSwImageSlotId | read-only | current | The slot ID. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.2 | ColumnsysSwImageFilename | read-only | current | The software image name. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.3 | ColumnsysSwImageProduct | read-only | current | The product name of the specified image. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.4 | ColumnsysSwImageVersion | read-only | current | The version of the specified image. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.5 | ColumnsysSwImageBuild | read-only | current | The build number of the specified image. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.6 | ColumnsysSwImageChksum | read-only | current | The chksum of specified image. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.7 | ColumnsysSwImageVerified | read-only | current | The state indicating whether the specified image is verified or not. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.8 | ColumnsysSwImageBuildDate | read-only | current | The date when the specified image is built. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.9 | ColumnsysSwImageLastModified | read-only | current | The date when the specified image is last modified. |
| 1.3.6.1.4.1.3375.2.1.9.2.2.1.10 | ColumnsysSwImageFileSize | read-only | current | The size of the specified software image. |
| 1.3.6.1.4.1.3375.2.1.9.3 | NodesysSoftwareHotfix | |||
| 1.3.6.1.4.1.3375.2.1.9.3.1 | ScalarsysSwHotfixNumber | read-only | current | The number of sysSoftwareHotfix entries in the table. |
| 1.3.6.1.4.1.3375.2.1.9.3.2 | TablesysSwHotfixTable | not-accessible | current | A table containing hotfix software information on the system. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1 | RowsysSwHotfixEntry | not-accessible | current | Columns in the sysSwHotfix Table |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.1 | ColumnsysSwHotfixSlotId | read-only | current | The slot ID. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.2 | ColumnsysSwHotfixFilename | read-only | current | The software image name. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.3 | ColumnsysSwHotfixProduct | read-only | current | The product name of the specified hotfix image. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.4 | ColumnsysSwHotfixVersion | read-only | current | The version of the specified hotfix image. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.5 | ColumnsysSwHotfixBuild | read-only | current | The build number of the specified hotfix image. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.6 | ColumnsysSwHotfixChksum | read-only | current | The chksum of specified hotfix image. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.7 | ColumnsysSwHotfixVerified | read-only | current | The state indicating whether the specified hotfix image is verified or not. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.8 | ColumnsysSwHotfixHotfixId | read-only | current | The ID of the hotfix image. |
| 1.3.6.1.4.1.3375.2.1.9.3.2.1.9 | ColumnsysSwHotfixHotfixTitle | read-only | current | The title of the hotfix image. |
| 1.3.6.1.4.1.3375.2.1.9.4 | NodesysSoftwareStatus | |||
| 1.3.6.1.4.1.3375.2.1.9.4.1 | ScalarsysSwStatusNumber | read-only | current | The number of sysSoftwareStatus entries in the table. |
| 1.3.6.1.4.1.3375.2.1.9.4.2 | TablesysSwStatusTable | not-accessible | current | A table containing software status information on the system. |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1 | RowsysSwStatusEntry | not-accessible | current | Columns in the sysSwStatus Table |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1.1 | ColumnsysSwStatusSlotId | read-only | current | The slot ID. |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1.2 | ColumnsysSwStatusVolume | read-only | current | The harddisk name. |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1.3 | ColumnsysSwStatusProduct | read-only | current | The product name of the specified software. |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1.4 | ColumnsysSwStatusVersion | read-only | current | The version of the specified software. |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1.5 | ColumnsysSwStatusBuild | read-only | current | The build number of the specified software. |
| 1.3.6.1.4.1.3375.2.1.9.4.2.1.6 | ColumnsysSwStatusActive | read-only | current | The state indicating whether the system is acive or not. |
| 1.3.6.1.4.1.3375.2.1.10 | NodesysClusters | |||
| 1.3.6.1.4.1.3375.2.1.10.1 | NodesysCluster | |||
| 1.3.6.1.4.1.3375.2.1.10.1.1 | ScalarsysClusterNumber | read-only | current | The number of sysCluster entries in the table. |
| 1.3.6.1.4.1.3375.2.1.10.1.2 | TablesysClusterTable | not-accessible | current | A table containing cluster information of the system. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1 | RowsysClusterEntry | not-accessible | current | Columns in the sysCluster Table |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.1 | ColumnsysClusterName | read-only | current | The name of a cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.2 | ColumnsysClusterEnabled | read-only | current | The state indicating whether cluster environment is enabled or not. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.3 | ColumnsysClusterFloatMgmtIpType | read-only | current | The IP address type of the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.4 | ColumnsysClusterFloatMgmtIp | read-only | current | The IP address of the specified cluster. It is interpreted within the context of a sysClusterMgmtIpType value. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.5 | ColumnsysClusterFloatMgmtNetmaskType | read-only | current | The netmask type of of the specified cluster IP address. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.6 | ColumnsysClusterFloatMgmtNetmask | read-only | current | The netmask of the specified cluster IP address. It is interpreted within the context of a sysFloatMgmtNetmaskType value. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.7 | ColumnsysClusterMinUpMbrs | read-only | current | The minimum number of UP members required for the specified cluster before a high availability action to be taken. This is used when ltmClusterMinUpMbrsEnable … |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.8 | ColumnsysClusterMinUpMbrsEnable | read-only | current | The state indicating whether or not an action will be taken when the minimum number of UP members requirement is not met for the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.9 | ColumnsysClusterMinUpMbrsAction | read-only | current | The action to be taken if the minimum number of UP members requirement is not met for the specified cluster. This is used when sysClusterMinUpMbrsEnable is tru… |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.10 | ColumnsysClusterAvailabilityState | read-only | current | The state of the specified cluster availability indicated in color |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.11 | ColumnsysClusterEnabledStat | read-only | current | The state of the specified cluster activity status, as specified by the user. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.12 | ColumnsysClusterDisabledParentType | read-only | current | The type of parent object which disabled the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.13 | ColumnsysClusterStatusReason | read-only | current | The detail description of the cluster's status of parent object which disabled the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.14 | ColumnsysClusterHaState | read-only | current | The state of high availability action. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.15 | ColumnsysClusterPriSlotId | read-only | current | The slot ID of current primary slot in the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.16 | ColumnsysClusterLastPriSlotId | read-only | current | The slot ID of last primary slot in the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.1.2.1.17 | ColumnsysClusterPriSelTime | read-only | current | The time interval since the primary slot is selected in the cluster. |
| 1.3.6.1.4.1.3375.2.1.10.2 | NodesysClusterMbr | |||
| 1.3.6.1.4.1.3375.2.1.10.2.1 | ScalarsysClusterMbrNumber | read-only | current | The number of sysClusterMbr entries in the table. |
| 1.3.6.1.4.1.3375.2.1.10.2.2 | TablesysClusterMbrTable | not-accessible | current | A table containing cluster members information of the system. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1 | RowsysClusterMbrEntry | not-accessible | current | Columns in the sysClusterMbr Table |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.1 | ColumnsysClusterMbrCluster | read-only | current | The name of a cluster. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.2 | ColumnsysClusterMbrSlotId | read-only | current | The slot id in the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.3 | ColumnsysClusterMbrAvailabilityState | read-only | current | The state of the specified cluster member availability indicated in color |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.4 | ColumnsysClusterMbrEnabledStat | read-only | current | The state of the specified cluster member activity status, as specified by the user. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.5 | ColumnsysClusterMbrDisabledParentType | read-only | current | The type of parent object which disabled the specified cluster member. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.6 | ColumnsysClusterMbrStatusReason | read-only | current | The detail description of the cluster's status of parent object which disabled the specified cluster member. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.7 | ColumnsysClusterMbrLicensed | read-only | current | The state indicating whether or not the specified cluster member is licensed. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.8 | ColumnsysClusterMbrState | read-only | current | The state which the specified cluster member in at. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.9 | ColumnsysClusterMbrEnabled | read-only | current | The state indicating whehter the specified member is enabled or not. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.10 | ColumnsysClusterMbrPriming | read-only | current | The state indicating whether or not priming is enabled. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.11 | ColumnsysClusterMbrMgmtAddrType | read-only | current | The IP address type of the specified cluster member. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.12 | ColumnsysClusterMbrMgmtAddr | read-only | current | The IP address of the specified cluster member. It is interpreted within the context of a sysClusterMbrMgmtAddrType value. |
| 1.3.6.1.4.1.3375.2.1.10.2.2.1.13 | ColumnsysClusterMbrHaState | read-only | current | The state of high availability action of the specified cluster member. |
| 1.3.6.1.4.1.3375.2.1.10.3 | NodesysChassisSlot | |||
| 1.3.6.1.4.1.3375.2.1.10.3.1 | ScalarsysChassisSlotNumber | read-only | current | The number of sysChassisSlot entries in the table. |
| 1.3.6.1.4.1.3375.2.1.10.3.2 | TablesysChassisSlotTable | not-accessible | current | A table containing slot information in the chassis. |
| 1.3.6.1.4.1.3375.2.1.10.3.2.1 | RowsysChassisSlotEntry | not-accessible | current | Columns in the sysChassisSlot Table |
| 1.3.6.1.4.1.3375.2.1.10.3.2.1.1 | ColumnsysChassisSlotSlotId | read-only | current | The slot id in the specified cluster. |
| 1.3.6.1.4.1.3375.2.1.10.3.2.1.2 | ColumnsysChassisSlotSerialNumber | read-only | current | The serial number of this chassis slot. |
| 1.3.6.1.4.1.3375.2.1.10.3.2.1.3 | ColumnsysChassisSlotDown | read-only | current | The state indicating whether the chassis slot is down or not. |
| 1.3.6.1.4.1.3375.2.1.10.3.2.1.4 | ColumnsysChassisSlotState | read-only | current | The chassis slot state |
| 1.3.6.1.4.1.3375.2.1.11 | NodesysModules | |||
| 1.3.6.1.4.1.3375.2.1.11.1 | NodesysModuleAllocation | |||
| 1.3.6.1.4.1.3375.2.1.11.1.1 | ScalarsysModuleAllocationNumber | read-only | current | The number of sysModuleAllocation entries in the table. |
| 1.3.6.1.4.1.3375.2.1.11.1.2 | TablesysModuleAllocationTable | not-accessible | current | Resource allocation information about modules on the system |
| 1.3.6.1.4.1.3375.2.1.11.1.2.1 | RowsysModuleAllocationEntry | not-accessible | current | Columns in the sysModuleAllocation Table |
| 1.3.6.1.4.1.3375.2.1.11.1.2.1.1 | ColumnsysModuleAllocationName | read-only | current | The name of the Module |
| 1.3.6.1.4.1.3375.2.1.11.1.2.1.2 | ColumnsysModuleAllocationProvisionLevel | read-only | current | The provisioning level indicates how the systems resources are distributed amongst the modules |
| 1.3.6.1.4.1.3375.2.1.11.1.2.1.3 | ColumnsysModuleAllocationMemoryRatio | read-only | current | The ratio of available memory to allocate. Only valid if level is 'custom' |
| 1.3.6.1.4.1.3375.2.1.11.1.2.1.4 | ColumnsysModuleAllocationCpuRatio | read-only | current | The ratio of CPU to allocate to this module. Only valid if level is 'custom' |
| 1.3.6.1.4.1.3375.2.1.11.1.2.1.5 | ColumnsysModuleAllocationDiskRatio | read-only | current | The ratio of available disk space to allocate to this module. Only valid if level is 'custom' |
| 1.3.6.1.4.1.3375.2.1.12 | NodesysProcess | |||
| 1.3.6.1.4.1.3375.2.1.12.1 | NodesysProcPidStat | |||
| 1.3.6.1.4.1.3375.2.1.12.1.1 | ScalarsysProcPidStatNumber | read-only | current | The number of sysProcPidStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.12.1.2 | TablesysProcPidStatTable | not-accessible | current | individual process stat and statm |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1 | RowsysProcPidStatEntry | not-accessible | current | Columns in the sysProcPidStat Table |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.1 | ColumnsysProcPidStatPid | read-only | current | process pid |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.2 | ColumnsysProcPidStatProcName | read-only | current | process name |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.3 | ColumnsysProcPidStatCommandLine | read-only | current | command line used to start process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.4 | ColumnsysProcPidStatModules | read-only | current | module name of this process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.5 | ColumnsysProcPidStatBladeNum | read-only | current | blade number |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.6 | ColumnsysProcPidStatProcessor | read-only | current | last CPU process run on |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.7 | ColumnsysProcPidStatUpdateTime | read-only | current | last time proc_pid_stat updated |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.8 | ColumnsysProcPidStatCpuUsageRecent | read-only | current | last poll interval cpu usage (percentage) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.9 | ColumnsysProcPidStatCpuUsage1min | read-only | current | last 1 min average cpu usage (percentage) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.10 | ColumnsysProcPidStatCpuUsage5mins | read-only | current | last 5 mins average cpu usage (percentage) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.11 | ColumnsysProcPidStatSystemUsageRecent | read-only | current | last poll interval system usage (percentage) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.12 | ColumnsysProcPidStatSystemUsage1min | read-only | current | last 1 min average system usage (percentage) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.13 | ColumnsysProcPidStatSystemUsage5mins | read-only | current | last 5 mins average system usage (percentage) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.14 | ColumnsysProcPidStatPpid | read-only | current | pid of process parent |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.15 | ColumnsysProcPidStatPgrp | read-only | current | process group id |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.16 | ColumnsysProcPidStatState | read-only | current | single-char code for process state (S=sleep) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.17 | ColumnsysProcPidStatSession | read-only | current | session id |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.18 | ColumnsysProcPidStatTtyNr | read-only | current | full device number of controlling terminal |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.19 | ColumnsysProcPidStatTpgid | read-only | current | terminal process group id |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.20 | ColumnsysProcPidStatFlags | read-only | current | kernel flags for the process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.21 | ColumnsysProcPidStatMinFlt | read-only | current | num minor pg faults since process start |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.22 | ColumnsysProcPidStatCminFlt | read-only | current | num minor pg faults of child processes |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.23 | ColumnsysProcPidStatMajFlt | read-only | current | num major pg faults since process start |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.24 | ColumnsysProcPidStatCmajFlt | read-only | current | num major pg faults of child processes |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.25 | ColumnsysProcPidStatUtime | read-only | current | user-mode CPU time accumulated by process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.26 | ColumnsysProcPidStatStime | read-only | current | kernel-mode CPU time accumulated by process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.27 | ColumnsysProcPidStatCutime | read-only | current | cumul utime of process + reaped children |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.28 | ColumnsysProcPidStatCstime | read-only | current | cumul stime of process + reaped children |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.29 | ColumnsysProcPidStatPriority | read-only | current | kernel scheduling priority |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.30 | ColumnsysProcPidStatNice | read-only | current | standard unix nice level of process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.31 | ColumnsysProcPidStatNumThreads | read-only | current | Number of threads in this process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.32 | ColumnsysProcPidStatItrealvalue | read-only | current | Time in jiffies before next SIGALRM sent |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.33 | ColumnsysProcPidStatStartTime | read-only | current | start time of process - sec since 1-1-70 |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.34 | ColumnsysProcPidStatVsize | read-only | current | number of pages of virtual memory ... |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.35 | ColumnsysProcPidStatRss | read-only | current | resident set size (pg) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.36 | ColumnsysProcPidStatRssRlim | read-only | current | resident set size limit |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.37 | ColumnsysProcPidStatStartCode | read-only | current | address of beginning of code segment |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.38 | ColumnsysProcPidStatEndCode | read-only | current | address of end of code segment |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.39 | ColumnsysProcPidStatStartStack | read-only | current | addr of the bottom of stack for process |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.40 | ColumnsysProcPidStatKstkEsp | read-only | current | kernel stack pointer |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.41 | ColumnsysProcPidStatKstkEip | read-only | current | kernel instruction pointer |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.42 | ColumnsysProcPidStatSignal | read-only | current | bit map of pending signals |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.43 | ColumnsysProcPidStatBlocked | read-only | current | mask of blocked signals |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.44 | ColumnsysProcPidStatSigignore | read-only | current | mask of ignored signals |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.45 | ColumnsysProcPidStatSigcatch | read-only | current | mask of caught signals |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.46 | ColumnsysProcPidStatWchan | read-only | current | address of kernel wait channel proc is |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.47 | ColumnsysProcPidStatNswap | read-only | current | number of page swapped |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.48 | ColumnsysProcPidStatCnswap | read-only | current | cumulative number of page swapped |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.49 | ColumnsysProcPidStatExitSignal | read-only | current | might not be SIGCHLD |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.50 | ColumnsysProcPidStatRtPriority | read-only | current | real-time priority |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.51 | ColumnsysProcPidStatPolicy | read-only | current | schedule policy |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.52 | ColumnsysProcPidStatProgSize | read-only | current | total program size |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.53 | ColumnsysProcPidStatResident | read-only | current | resident size |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.54 | ColumnsysProcPidStatShare | read-only | current | shared pages |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.55 | ColumnsysProcPidStatTSize | read-only | current | text (code) |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.56 | ColumnsysProcPidStatLSize | read-only | current | library, not used in Linux 2.6 |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.57 | ColumnsysProcPidStatDSize | read-only | current | data + stack, not used in Linux 2.6 |
| 1.3.6.1.4.1.3375.2.1.12.1.2.1.58 | ColumnsysProcPidStatDirty | read-only | current | dirty pages, not used in Linux 2.6 |
| 1.3.6.1.4.1.3375.2.1.13 | NodesysVCMP | |||
| 1.3.6.1.4.1.3375.2.1.13.1 | NodesysVcmp | |||
| 1.3.6.1.4.1.3375.2.1.13.1.1 | ScalarsysVcmpNumber | read-only | current | The number of sysVcmp entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.1.2 | TablesysVcmpTable | not-accessible | current | A list VCMP guest configurations. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1 | RowsysVcmpEntry | not-accessible | current | Columns in the sysVcmp Table |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.1 | ColumnsysVcmpVcmpName | read-only | current | The name of the VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.2 | ColumnsysVcmpHostname | read-only | current | The host name of the VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.3 | ColumnsysVcmpSlots | read-only | current | The maximum number of slots to which the VCMP guest may be allocated. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.4 | ColumnsysVcmpState | read-only | current | VCMP guests can be in one of three user-chosen states: Configured, Provisioned, or Deployed. A guest in the Configured state has no hardware resources allocate… |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.5 | ColumnsysVcmpMgmtNetwork | read-only | current | A VCMP guest is set to one of two management network modes: bridged or isolated. In bridged mode, the management interface of the guest's virtual machines are … |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.6 | ColumnsysVcmpMgmtAddrType | read-only | current | The IP address type of sysMgmtAddr. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.7 | ColumnsysVcmpMgmtAddr | read-only | current | The IP address of the management port of a VCMP guest. It is interpreted within the context of a sysMgmtAddrType value. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.8 | ColumnsysVcmpMgmtNetmaskType | read-only | current | The IP address type of sysMgmtNetmask. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.9 | ColumnsysVcmpMgmtNetmask | read-only | current | The netmask of the management port of a VCMP guest. It is interpreted within the context of a sysMgmtNetmaskType value. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.10 | ColumnsysVcmpMgmtGwType | read-only | current | The IP address type of sysMgmtGw. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.11 | ColumnsysVcmpMgmtGw | read-only | current | The gateway of the management port of VCMP guest. It is interpreted within the context of a sysMgmtGwType value. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.12 | ColumnsysVcmpVcmpId | read-only | current | VCMP guest ID (valid range is 1-65535). |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.13 | ColumnsysVcmpMgmtBaseMac | read-only | current | The base MAC address of the management port of this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.14 | ColumnsysVcmpBaseMac | read-only | current | The base MAC address assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.15 | ColumnsysVcmpMacPoolSize | read-only | current | The number of MAC addresses assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.16 | ColumnsysVcmpInitialImage | read-only | current | The initial software image file name that the hypervisor should use when installing TMOS to a guest's virtual disks. This does not reflect changes made in the … |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.17 | ColumnsysVcmpVirtualDisk | read-only | current | The virtual disk that the VCMP guest is using. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.18 | ColumnsysVcmpInitialHotfix | read-only | current | The initial software hotfix image file name that the hypervisor should use when installing TMOS to a guest's virtual disks. This does not reflect changes made … |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.19 | ColumnsysVcmpMinSlots | read-only | current | The minimum number of slots to which the VCMP guest may be allocated. |
| 1.3.6.1.4.1.3375.2.1.13.1.2.1.20 | ColumnsysVcmpCoresPerSlot | read-only | current | The number of cores per slot that should be allocated to the VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.2 | NodesysVcmpCpuCore | |||
| 1.3.6.1.4.1.3375.2.1.13.2.1 | ScalarsysVcmpCpuCoreNumber | read-only | current | The number of sysVcmpCpuCore entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.2.2 | TablesysVcmpCpuCoreTable | not-accessible | current | A list of CPU cores assigned to VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.2.2.1 | RowsysVcmpCpuCoreEntry | not-accessible | current | Columns in the sysVcmpCpuCore Table |
| 1.3.6.1.4.1.3375.2.1.13.2.2.1.1 | ColumnsysVcmpCpuCoreVcmpName | read-only | current | The VCMP guest name. |
| 1.3.6.1.4.1.3375.2.1.13.2.2.1.2 | ColumnsysVcmpCpuCoreCpuCoreId | read-only | current | CPU cores assigned to VCMP guest. NOTE: cpu_core_id does not need to refer to existing objects in the cpu_core table. This can happen if a pulled blade causes … |
| 1.3.6.1.4.1.3375.2.1.13.3 | NodesysVcmpVlan | |||
| 1.3.6.1.4.1.3375.2.1.13.3.1 | ScalarsysVcmpVlanNumber | read-only | current | The number of sysVcmpVlan entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.3.2 | TablesysVcmpVlanTable | not-accessible | current | A list of VLANs associated with the VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.3.2.1 | RowsysVcmpVlanEntry | not-accessible | current | Columns in the sysVcmpVlan Table |
| 1.3.6.1.4.1.3375.2.1.13.3.2.1.1 | ColumnsysVcmpVlanVcmpName | read-only | current | VCMP guest name |
| 1.3.6.1.4.1.3375.2.1.13.3.2.1.2 | ColumnsysVcmpVlanVlanName | read-only | current | The name of the VLAN assigned to a VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4 | NodesysVcmpStat | |||
| 1.3.6.1.4.1.3375.2.1.13.4.1 | ScalarsysVcmpStatNumber | read-only | current | The number of sysVcmpStat entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.4.2 | TablesysVcmpStatTable | not-accessible | current | The statistics and state of this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1 | RowsysVcmpStatEntry | not-accessible | current | Columns in the sysVcmpStat Table |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.1 | ColumnsysVcmpStatVcmpName | read-only | current | The name of the VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.2 | ColumnsysVcmpStatVcmpId | read-only | current | The VCMP guest ID (valid range is 1 to 65535). |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.3 | ColumnsysVcmpStatSlotId | read-only | current | The ID of the slot on which the VCMP guest resides. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.4 | ColumnsysVcmpStatVmStatus | read-only | current | The status of this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.5 | ColumnsysVcmpStatDiskUse | read-only | current | The disk space used by this VCMP guest (in bytes). |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.6 | ColumnsysVcmpStatMemoryUse | read-only | current | The memory space allocated by this VCMP guest (in bytes). |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.7 | ColumnsysVcmpStatBaseMac | read-only | current | The base MAC address assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.8 | ColumnsysVcmpStatMacPoolSize | read-only | current | The number of MAC addresses assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.9 | ColumnsysVcmpStatCores | read-only | current | The number of cores assigned to this VCMP guest on this slot. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.10 | ColumnsysVcmpStatVdisk | read-only | current | The virtual disk assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.11 | ColumnsysVcmpStatStarts | read-only | current | The number of starts of this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.12 | ColumnsysVcmpStatRetries | read-only | current | The number of retries of this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.13 | ColumnsysVcmpStatUptime | read-only | current | The time at which this VCMP guest became up and running. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.14 | ColumnsysVcmpStatComment | read-only | current | The error or state messages for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.15 | ColumnsysVcmpStatInterfaceNames | read-only | current | The interfaces assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.16 | ColumnsysVcmpStatCoreNames | read-only | current | The cores assigned to this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.17 | ColumnsysVcmpStatPrompt | read-only | current | The prompt status of this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.18 | ColumnsysVcmpStatCpuUsageRecent | read-only | current | Recent CPU usage for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.19 | ColumnsysVcmpStatCpuUsage1min | read-only | current | CPU usage in the past minute for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.20 | ColumnsysVcmpStatCpuUsage5mins | read-only | current | CPU usage in the past 5 minutes for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.21 | ColumnsysVcmpStatPktsIn | read-only | current | Incoming packet count for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.22 | ColumnsysVcmpStatBytesIn | read-only | current | Incoming byte count for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.23 | ColumnsysVcmpStatMcastIn | read-only | current | Incoming multicasts for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.24 | ColumnsysVcmpStatDropsIn | read-only | current | Drops on incoming traffic for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.25 | ColumnsysVcmpStatPktsOut | read-only | current | Outgoing packet count for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.26 | ColumnsysVcmpStatBytesOut | read-only | current | Outgoing byte count for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.27 | ColumnsysVcmpStatMcastOut | read-only | current | Outgoing multicasts for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.4.2.1.28 | ColumnsysVcmpStatDropsOut | read-only | current | Drops on outgoing traffic for this VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.5 | NodesysVcmpAssignedSlots | |||
| 1.3.6.1.4.1.3375.2.1.13.5.1 | ScalarsysVcmpAssignedSlotsNumber | read-only | current | The number of sysVcmpAssignedSlots entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.5.2 | TablesysVcmpAssignedSlotsTable | not-accessible | current | A list of the slots assigned to a VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.5.2.1 | RowsysVcmpAssignedSlotsEntry | not-accessible | current | Columns in the sysVcmpAssignedSlots Table |
| 1.3.6.1.4.1.3375.2.1.13.5.2.1.1 | ColumnsysVcmpAssignedSlotsName | read-only | current | The name of a VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.5.2.1.2 | ColumnsysVcmpAssignedSlotsIndex | read-only | current | The index of the slot number assigned to the specified VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.5.2.1.3 | ColumnsysVcmpAssignedSlotsSlotId | read-only | current | The slot number assigned to the specified VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.6 | NodesysVcmpAllowedSlots | |||
| 1.3.6.1.4.1.3375.2.1.13.6.1 | ScalarsysVcmpAllowedSlotsNumber | read-only | current | The number of sysVcmpAllowedSlots entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.6.2 | TablesysVcmpAllowedSlotsTable | not-accessible | current | A list of the slots that are allowed to be assigned to a VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.6.2.1 | RowsysVcmpAllowedSlotsEntry | not-accessible | current | Columns in the sysVcmpAllowedSlots Table |
| 1.3.6.1.4.1.3375.2.1.13.6.2.1.1 | ColumnsysVcmpAllowedSlotsName | read-only | current | The name of a VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.6.2.1.2 | ColumnsysVcmpAllowedSlotsIndex | read-only | current | The index of a slot number allowed for the specified VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.6.2.1.3 | ColumnsysVcmpAllowedSlotsSlotId | read-only | current | A slot number allowed for the specified VCMP guest. |
| 1.3.6.1.4.1.3375.2.1.13.7 | NodesysVirtualDisk | |||
| 1.3.6.1.4.1.3375.2.1.13.7.1 | ScalarsysVirtualDiskNumber | read-only | current | The number of sysVirtualDisk entries in the table. |
| 1.3.6.1.4.1.3375.2.1.13.7.2 | TablesysVirtualDiskTable | not-accessible | current | A list of virtual disks for the VCMP guest VMs on the appliance or on each slot. |
| 1.3.6.1.4.1.3375.2.1.13.7.2.1 | RowsysVirtualDiskEntry | not-accessible | current | Columns in the sysVirtualDisk Table |
| 1.3.6.1.4.1.3375.2.1.13.7.2.1.1 | ColumnsysVirtualDiskFilename | read-only | current | Virtual disk image filename on the host. |
| 1.3.6.1.4.1.3375.2.1.13.7.2.1.2 | ColumnsysVirtualDiskOperatingSystem | read-only | current | The guest operating system installed on the virtual disk. |
| 1.3.6.1.4.1.3375.2.1.13.7.2.1.3 | ColumnsysVirtualDiskSlotId | read-only | current | The chassis slot number of this virtual disk. |
| 1.3.6.1.4.1.3375.2.1.13.7.2.1.4 | ColumnsysVirtualDiskState | read-only | current | The status of this virtual disk. |
| 1.3.6.1.4.1.3375.2.1.14 | NodesysCM | |||
| 1.3.6.1.4.1.3375.2.1.14.1 | NodesysCmSyncStatus | |||
| 1.3.6.1.4.1.3375.2.1.14.1.1 | ScalarsysCmSyncStatusId | read-only | current | The sync status ID on the system. unknown - the device is disconnected from the device group; syncing - the device is joining the device group or has requested… |
| 1.3.6.1.4.1.3375.2.1.14.1.2 | ScalarsysCmSyncStatusStatus | read-only | current | The sync status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.1.3 | ScalarsysCmSyncStatusColor | read-only | current | The color of the sync status on the system. green - the system is functioning correctly; yellow - the system may be functioning suboptimally; red - the system … |
| 1.3.6.1.4.1.3375.2.1.14.1.4 | ScalarsysCmSyncStatusSummary | read-only | current | The summary of the sync status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.2 | NodesysCmSyncStatusDetails | |||
| 1.3.6.1.4.1.3375.2.1.14.2.1 | ScalarsysCmSyncStatusDetailsNumber | read-only | current | The number of sysCmSyncStatusDetails entries in the table. |
| 1.3.6.1.4.1.3375.2.1.14.2.2 | TablesysCmSyncStatusDetailsTable | not-accessible | current | A table containing details of sync status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.2.2.1 | RowsysCmSyncStatusDetailsEntry | not-accessible | current | Columns in the sysCmSyncStatusDetails Table |
| 1.3.6.1.4.1.3375.2.1.14.2.2.1.1 | ColumnsysCmSyncStatusDetailsIndex | read-only | current | The index of the table that contains the details of the sync status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.2.2.1.2 | ColumnsysCmSyncStatusDetailsDetails | read-only | current | The details of the sync status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.3 | NodesysCmFailoverStatus | |||
| 1.3.6.1.4.1.3375.2.1.14.3.1 | ScalarsysCmFailoverStatusId | read-only | current | The failover status ID on the system. unknown - the failover status of the device is unknown; offline - the device is offline; forcedOffline - the device is fo… |
| 1.3.6.1.4.1.3375.2.1.14.3.2 | ScalarsysCmFailoverStatusStatus | read-only | current | The failover status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.3.3 | ScalarsysCmFailoverStatusColor | read-only | current | The color of the failover status on the system. green - the system is functioning correctly; yellow - the system may be functioning suboptimally; red - the sys… |
| 1.3.6.1.4.1.3375.2.1.14.3.4 | ScalarsysCmFailoverStatusSummary | read-only | current | The summary of the failover status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.4 | NodesysCmFailoverStatusDetails | |||
| 1.3.6.1.4.1.3375.2.1.14.4.1 | ScalarsysCmFailoverStatusDetailsNumber | read-only | current | The number of sysCmFailoverStatusDetails entries in the table. |
| 1.3.6.1.4.1.3375.2.1.14.4.2 | TablesysCmFailoverStatusDetailsTable | not-accessible | current | A table containing details of failover status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.4.2.1 | RowsysCmFailoverStatusDetailsEntry | not-accessible | current | Columns in the sysCmFailoverStatusDetails Table |
| 1.3.6.1.4.1.3375.2.1.14.4.2.1.1 | ColumnsysCmFailoverStatusDetailsIndex | read-only | current | The index of the table that contains the details of the failover status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.4.2.1.2 | ColumnsysCmFailoverStatusDetailsDetails | read-only | current | The details of the failover status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.5 | NodesysCmTrafficGroupStatus | |||
| 1.3.6.1.4.1.3375.2.1.14.5.1 | ScalarsysCmTrafficGroupStatusNumber | read-only | current | The number of sysCmTrafficGroupStatus entries in the table. |
| 1.3.6.1.4.1.3375.2.1.14.5.2 | TablesysCmTrafficGroupStatusTable | not-accessible | current | A table containing information of traffic group(s) status on the system. |
| 1.3.6.1.4.1.3375.2.1.14.5.2.1 | RowsysCmTrafficGroupStatusEntry | not-accessible | current | Columns in the sysCmTrafficGroupStatus Table |
| 1.3.6.1.4.1.3375.2.1.14.5.2.1.1 | ColumnsysCmTrafficGroupStatusTrafficGroup | read-only | current | The name of the traffic group. |
| 1.3.6.1.4.1.3375.2.1.14.5.2.1.2 | ColumnsysCmTrafficGroupStatusDeviceName | read-only | current | The name of the device. |
| 1.3.6.1.4.1.3375.2.1.14.5.2.1.3 | ColumnsysCmTrafficGroupStatusFailoverStatus | read-only | current | The failover status of the device within the traffic group. unknown - the failover status of the device is unknown; offline - the device is offline; forcedOffl… |
| 1.3.6.1.4.1.3375.2.5.1.1 | CompliancebigipSystemCompliance | current | This specifies the objects that are required to claim compliance to F5 Traffic Management System. | |
| 1.3.6.1.4.1.3375.2.5.2.1 | NodebigipSystemGroups | |||
| 1.3.6.1.4.1.3375.2.5.2.1.1 | GroupsysAttrGroup | current | A collection of objects of sysGlobalAttr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.2 | GroupsysStatGroup | current | A collection of objects of sysGlobalStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.3 | GroupsysAuthStatGroup | current | A collection of objects of sysGlobalAuthStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.4 | GroupsysConnPoolStatGroup | current | A collection of objects of sysGlobalConnPoolStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.5 | GroupsysHttpStatGroup | current | A collection of objects of sysGlobalHttpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.6 | GroupsysIcmpStatGroup | current | A collection of objects of sysGlobalIcmpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.7 | GroupsysIcmp6StatGroup | current | A collection of objects of sysGlobalIcmp6Stat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.8 | GroupsysIpStatGroup | current | A collection of objects of sysGlobalIpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.9 | GroupsysIp6StatGroup | current | A collection of objects of sysGlobalIp6Stat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.10 | GroupsysClientsslStatGroup | current | A collection of objects of sysGlobalClientSslStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.11 | GroupsysServersslStatGroup | current | A collection of objects of sysGlobalServerSslStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.12 | GroupsysStreamStatGroup | current | A collection of objects of sysGlobalStreamStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.13 | GroupsysTcpStatGroup | current | A collection of objects of sysGlobalTcpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.14 | GroupsysUdpStatGroup | current | A collection of objects of sysGlobalUdpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.15 | GroupsysAdminIpGroup | current | A collection of objects of sysAdminIp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.16 | GroupsysArpStaticEntryGroup | current | A collection of objects of sysArpStaticEntry MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.17 | GroupsysDot1dbaseStatGroup | current | A collection of objects of sysDot1dbaseStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.18 | GroupsysDot1dbaseStatPortGroup | current | A collection of objects of sysDot1dbaseStatPort MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.19 | GroupsysInterfaceGroup | current | A collection of objects of sysInterface MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.20 | GroupsysIntfMediaGroup | current | A collection of objects of sysInterfaceMediaOptions MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.21 | GroupsysIfGroup | current | A collection of objects of sysInterfaceId MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.22 | GroupsysInterfaceStatGroup | current | A collection of objects of sysInterfaceStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.23 | GroupsysIfxStatGroup | current | A collection of objects of sysIfxStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.24 | GroupsysL2ForwardGroup | current | A collection of objects of sysL2Forward MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.25 | GroupsysPacketFilterGroup | current | A collection of objects of sysPacketFilter MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.26 | GroupsysPacketFilterAddrGroup | current | A collection of objects of sysPacketFilterAddress MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.27 | GroupsysPacketFilterVlanGroup | current | A collection of objects of sysPacketFilterVlan MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.28 | GroupsysPacketFilterMacGroup | current | A collection of objects of sysPacketFilterMac MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.29 | GroupsysPacketFilterStatGroup | current | A collection of objects of sysPacketFilterStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.30 | GroupsysRouteMgmtEntryGroup | current | A collection of objects of sysRouteMgmtEntry MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.31 | GroupsysRouteStaticEntryGroup | current | A collection of objects of sysRouteStaticEntry MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.32 | GroupsysSelfIpGroup | current | A collection of objects of sysSelfIp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.33 | GroupsysSelfPortGroup | current | A collection of objects of sysSelfPort MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.34 | GroupsysStpGroup | current | A collection of objects of sysStp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.35 | GroupsysStpGlobalsGroup | current | A collection of objects of sysStpGlobals MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.36 | GroupsysStpInterfaceMbrGroup | current | A collection of objects of sysStpInterfaceMbr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.37 | GroupsysStpVlanMbrGroup | current | A collection of objects of sysStpVlanMbr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.38 | GroupsysStpBridgeStatGroup | current | A collection of objects of sysStpBridgeStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.39 | GroupsysStpBridgeTreeStatGroup | current | A collection of objects of sysStpBridgeTreeStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.40 | GroupsysStpInterfaceStatGroup | current | A collection of objects of sysStpInterfaceStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.41 | GroupsysStpInterfaceTreeStatGroup | current | A collection of objects of sysStpInterfaceTreeStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.42 | GroupsysDot3StatGroup | current | A collection of objects of sysDot3Stat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.43 | GroupsysTrunkGroup | current | A collection of objects of sysTrunk MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.44 | GroupsysTrunkStatGroup | current | A collection of objects of sysTrunkStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.45 | GroupsysTrunkCfgMemberGroup | current | A collection of objects of sysTrunkCfgMember MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.46 | GroupsysVlanDataGroup | current | A collection of objects of sysVlan MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.47 | GroupsysVlanMemberGroup | current | A collection of objects of sysVlanMember MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.48 | GroupsysVlanGroupGroup | current | A collection of objects of sysVlanGroup MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.49 | GroupsysVlanGroupMbrGroup | current | A collection of objects of sysVlanGroupMbr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.50 | GroupsysProxyExclusionGroup | current | A collection of objects of sysProxyExclusion MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.51 | GroupsysCpuGroup | current | A collection of objects of sysCpu MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.52 | GroupsysChassisFanGroup | current | A collection of objects of sysChassisFan MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.53 | GroupsysChassisPowerSupplyGroup | current | A collection of objects of sysChassisPowerSupply MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.54 | GroupsysChassisTempGroup | current | A collection of objects of sysChassisTemp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.55 | GroupsysProductGroup | current | A collection of objects of sysProduct MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.56 | GroupsysSubMemoryGroup | current | A collection of objects of sysSubMemory MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.57 | GroupsysSystemGroup | current | A collection of objects of sysSystem MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.58 | GroupsysFastHttpStatGroup | current | A collection of objects of sysGlobalFastHttpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.59 | GroupsysXmlStatGroup | current | A collection of objects of sysGlobalXmlStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.60 | GroupsysGeneralGroup | current | A collection of objects of sysGeneral MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.61 | GroupsysIiopStatGroup | current | A collection of objects of sysGlobalIiopStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.62 | GroupsysRtspStatGroup | current | A collection of objects of sysGlobalRtspStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.63 | GroupsysSctpStatGroup | current | A collection of objects of sysGlobalSctpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.64 | GroupsysL2ForwardStatGroup | current | A collection of objects of sysL2ForwardStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.65 | GroupsysL2ForwardAttrGroup | current | A collection of objects of sysL2ForwardAttr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.66 | GroupsysHostMemoryGroup | current | A collection of objects of sysHostMemory MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.67 | GroupsysHostCpuGroup | current | A collection of objects of sysHostCpu MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.68 | GroupsysHostDiskGroup | current | A collection of objects of sysHostDisk MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.69 | GroupsysSelfPortDefGroup | current | A collection of objects of sysSelfPortDefault MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.70 | GroupsysIntfMediaSfpGroup | current | A collection of objects of sysInterfaceMediaSfp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.71 | GroupsysPvaStatGroup | current | A collection of objects of sysPvaStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.72 | GroupsysTmmStatGroup | current | A collection of objects of sysTmmStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.73 | GroupsysMultiHostGroup | current | A collection of objects of sysMultiHost MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.74 | GroupsysMultiHostCpuGroup | current | A collection of objects of sysMultiHostCpu MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.75 | GroupsysFastL4StatGroup | current | A collection of objects of sysGlobalFastL4Stat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.76 | GroupsysClusterGroup | current | A collection of objects of sysCluster MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.77 | GroupsysClusterMbrGroup | current | A collection of objects of sysClusterMbr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.78 | GroupsysSwVolumeGroup | current | A collection of objects of sysSoftwareVolume MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.79 | GroupsysSwImageGroup | current | A collection of objects of sysSoftwareImage MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.80 | GroupsysSwHotfixGroup | current | A collection of objects of sysSoftwareHotfix MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.81 | GroupsysSwStatusGroup | current | A collection of objects of sysSoftwareStatus MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.82 | GroupsysGlobalHostGroup | current | A collection of objects of sysGlobalHost MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.83 | GroupsysModuleAllocationGroup | current | A collection of objects of sysModuleAllocation MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.84 | GroupsysGlobalTmmStatGroup | current | A collection of objects of sysGlobalTmmStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.85 | GroupsysPlatformInfoGroup | current | A collection of objects of sysPlatformInfo MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.86 | GroupsysLogicalDiskGroup | current | A collection of objects of sysLogicalDisk MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.87 | GroupsysPhysicalDiskGroup | current | A collection of objects of sysPhysicalDisk MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.88 | GroupsysDiskBayGroup | current | A collection of objects of sysDiskBay MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.89 | GroupsysLogicalDiskMembersGroup | current | A collection of objects of sysLogicalDiskMembers MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.90 | GroupsysProcPidStatGroup | current | A collection of objects of sysProcPidStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.91 | GroupsysHttpCompressionStatGroup | current | A collection of objects of sysGlobalHttpCompressionStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.92 | GroupsysWebAccelerationStatGroup | current | A collection of objects of sysGlobalWebAccelerationStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.93 | GroupsysVlanStatGroup | current | A collection of objects of sysVlanStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.94 | GroupsysVlanxStatGroup | current | A collection of objects of sysVlanxStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.95 | GroupsysVcmpGroup | current | A collection of objects of sysVcmp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.96 | GroupsysVcmpCpuCoreGroup | current | A collection of objects of sysVcmpCpuCore MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.97 | GroupsysVcmpVlanGroup | current | A collection of objects of sysVcmpVlan MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.98 | GroupsysVcmpStatGroup | current | A collection of objects of sysVcmpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.99 | GroupsysChassisSlotGroup | current | A collection of objects of sysChassisSlot MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.100 | GroupsysSysDeviceGroup | current | A collection of objects of sysSysDevice MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.101 | GroupsysUnicastAddrGroup | current | A collection of objects of sysUnicastAddr MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.102 | GroupsysSysDeviceActiveModulesGroup | current | A collection of objects of sysSysDeviceActiveModules MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.103 | GroupsysSysDeviceInactiveModulesGroup | current | A collection of objects of sysSysDeviceInactiveModules MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.104 | GroupsysSysDeviceOptionalModulesGroup | current | A collection of objects of sysSysDeviceOptionalModules MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.105 | GroupsysSysDeviceTimelimitedModulesGroup | current | A collection of objects of sysSysDeviceTimelimitedModules MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.106 | GroupsysStpGlobals2Group | current | A collection of objects of sysStpGlobals2 MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.107 | GroupsysCpuSensorGroup | current | A collection of objects of sysCpuSensor MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.108 | GroupsysCmSyncStatusGroup | current | A collection of objects of sysCmSyncStatus MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.109 | GroupsysCmSyncStatusDetailsGroup | current | A collection of objects of sysCmSyncStatusDetails MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.110 | GroupsysCmFailoverStatusGroup | current | A collection of objects of sysCmFailoverStatus MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.111 | GroupsysCmFailoverStatusDetailsGroup | current | A collection of objects of sysCmFailoverStatusDetails MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.112 | GroupsysCmTrafficGroupStatusGroup | current | A collection of objects of sysCmTrafficGroupStatus MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.113 | GroupsysDnsStatGroup | current | A collection of objects of sysGlobalDnsStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.114 | GroupsysLsnPoolStatGroup | current | A collection of objects of sysGlobalLsnPoolStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.115 | GroupsysFecStatGroup | current | A collection of objects of sysFecStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.116 | GroupsysVcmpAssignedSlotsGroup | current | A collection of objects of sysVcmpAssignedSlots MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.117 | GroupsysVcmpAllowedSlotsGroup | current | A collection of objects of sysVcmpAllowedSlots MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.118 | GroupsysVirtualDiskGroup | current | A collection of objects of sysVirtualDisk MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.119 | GroupsysGlobalSipStatGroup | current | A collection of objects of sysGlobalSipStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.120 | GroupsysGlobalFtpStatGroup | current | A collection of objects of sysGlobalFtpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.121 | GroupsysBladeTempGroup | current | A collection of objects of sysBladeTemp MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.122 | GroupsysBladeVoltageGroup | current | A collection of objects of sysBladeVoltage MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.123 | GroupsysProfilePptpStatGroup | current | A collection of objects of sysGlobalPptpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.124 | GroupsysPcpStatGroup | current | A collection of objects of sysGlobalPcpStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.125 | GroupsysDnsServerStatGroup | current | A collection of objects of sysGlobalDnsServerStat MIB. | |
| 1.3.6.1.4.1.3375.2.5.2.1.126 | GroupsysMptcpStatGroup | current | A collection of objects of sysGlobalMptcpStat MIB. |