FASTPATH-LOGGING-MIB
46 objects
This MIB provides objects to configure and display events logged on this system.
Imported Objects
| BROADCOM-REF-MIB | fastPath |
| FASTPATH-INVENTORY-MIB | agentInventoryComponentIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.1.1.14 | IdentityfastPathLogging | This MIB provides objects to configure and display events logged on this system. | ||
| 1.3.6.1.4.1.4413.1.1.14.1 | NodeagentLogConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.1.1 | NodeagentLogInMemoryConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.1.1.1 | ScalaragentLogInMemoryAdminStatus | read-write | current | Administratively enable/disable the In Memory log. |
| 1.3.6.1.4.1.4413.1.1.14.1.1.4 | ScalaragentLogInMemoryBehavior | read-write | current | Configures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new … |
| 1.3.6.1.4.1.4413.1.1.14.1.2 | NodeagentLogConsoleConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.1.2.1 | ScalaragentLogConsoleAdminStatus | read-write | current | Admin mode for console logs |
| 1.3.6.1.4.1.4413.1.1.14.1.2.2 | ScalaragentLogConsoleSeverityFilter | read-write | current | Severity filter for console logs |
| 1.3.6.1.4.1.4413.1.1.14.1.3 | NodeagentLogPersistentConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.1.3.1 | ScalaragentLogPersistentAdminStatus | read-write | current | This control disables/enables logging for the persistent startup log. Setting this value to disable does not clear the current contents of the log. |
| 1.3.6.1.4.1.4413.1.1.14.1.3.2 | ScalaragentLogPersistentSeverityFilter | read-write | current | This control specifies the minimum severity to log to the startup and operation log. Messages with an equal or lower numerical severity are logged. |
| 1.3.6.1.4.1.4413.1.1.14.1.4 | NodeagentLogSysLogConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.1.4.1 | ScalaragentLogSyslogAdminStatus | read-write | current | For Enabling and Disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.3 | ScalaragentLogSyslogLocalPort | read-write | current | This is the port on the local host from which syslog messages are sent. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.4 | ScalaragentLogSyslogMaxHosts | read-only | current | Maximum number of hosts that can be configured for logging syslog messages. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5 | TableagentLogSyslogHostTable | not-accessible | current | Syslog host table containing syslog host entries. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1 | RowagentLogSyslogHostEntry | not-accessible | current | Syslog Host entry attributes. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1.1 | ColumnagentLogHostTableIndex | not-accessible | current | Index to syslog host entry in syslog host table. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1.2 | ColumnagentLogHostTableIpAddressType | read-create | current | Syslog Host table IP Address Type. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1.3 | ColumnagentLogHostTableIpAddress | read-create | current | Syslog Host table IP Address. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1.4 | ColumnagentLogHostTablePort | read-create | current | Syslog Host table port number. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1.5 | ColumnagentLogHostTableSeverityFilter | read-create | current | Configures the minimum severity that will be stored in the In Memory log. |
| 1.3.6.1.4.1.4413.1.1.14.1.4.5.1.7 | ColumnagentLogHostTableRowStatus | read-create | current | Syslog Host table row status |
| 1.3.6.1.4.1.4413.1.1.14.1.5 | NodeagentLogCliCommandsConfigGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.1.5.1 | ScalaragentLogCliCommandsAdminStatus | read-write | current | Administratively enable/disable the logging of the CLI Commands |
| 1.3.6.1.4.1.4413.1.1.14.2 | NodeagentLogStatisticsGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.2.1 | ScalaragentLogMessagesReceived | read-only | current | The number of messages received by the log process. This includes messages that are dropped or ignored. |
| 1.3.6.1.4.1.4413.1.1.14.2.2 | ScalaragentLogMessagesDropped | read-only | current | The number of messages that could not be processed due to error or lack of resources. |
| 1.3.6.1.4.1.4413.1.1.14.2.3 | ScalaragentLogSyslogMessagesRelayed | read-only | current | The number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host. |
| 1.3.6.1.4.1.4413.1.1.14.2.4 | ScalaragentLogSyslogMessagesIgnored | read-only | deprecated | The number of messages that were not processed by the syslog process because the component name or the priority level did not match any specification. |
| 1.3.6.1.4.1.4413.1.1.14.2.5 | ScalaragentLogMessageReceivedTime | read-only | current | The local time when a message was last received by the log subsystem specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970. |
| 1.3.6.1.4.1.4413.1.1.14.2.6 | ScalaragentLogSyslogMessageDeliveredTime | read-only | current | The local time when a message was last delivered to a syslog host specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970. |
| 1.3.6.1.4.1.4413.1.1.14.3 | NodeagentLogInMemoryGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.3.1 | ScalaragentLogInMemoryLogCount | read-only | current | The count of valid entries in the in-memory log. |
| 1.3.6.1.4.1.4413.1.1.14.3.2 | TableagentLogInMemoryTable | not-accessible | current | The in-memory log table containing sequence of in-memory log entries. |
| 1.3.6.1.4.1.4413.1.1.14.3.2.1 | RowagentLogInMemoryEntry | not-accessible | current | An individual message entry in in-memory log table. |
| 1.3.6.1.4.1.4413.1.1.14.3.2.1.1 | ColumnagentLogInMemoryMsgIndex | not-accessible | current | The index to message entry in the in-memory log table. |
| 1.3.6.1.4.1.4413.1.1.14.3.2.1.2 | ColumnagentLogInMemoryMsgText | read-only | current | Message text info for inmemory logged messages. |
| 1.3.6.1.4.1.4413.1.1.14.4 | NodeagentLogPersistentGroup | |||
| 1.3.6.1.4.1.4413.1.1.14.4.1 | ScalaragentLogPersistentLogCount | read-only | current | The count of valid entries in the persistent log. |
| 1.3.6.1.4.1.4413.1.1.14.4.4 | TableagentLogPersistentTable | not-accessible | current | Table for storing persistent log messages. |
| 1.3.6.1.4.1.4413.1.1.14.4.4.1 | RowagentLogPersistentEntry | not-accessible | current | Log entry details for logging message in persistent log table. |
| 1.3.6.1.4.1.4413.1.1.14.4.4.1.1 | ColumnagentLogMsgPersistentMsgIndex | not-accessible | current | Table index for logging message in persistent log table. |
| 1.3.6.1.4.1.4413.1.1.14.4.4.1.2 | ColumnagentLogMsgPersistentMsgText | read-only | current | The text corresponding to persistent log message. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AgentLogFacility | INTEGER { kernel(0), user(1), mail(2), system(3), security(4), syslog(5), lpr(6), nntp(7), uucp(8), cron(9), auth (10), ftp(11), ntp(12), audit(13), alert(14), clock(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23) } | current | Facility code used in determining the SysLog Priority value. |
| AgentLogSeverity | INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7) } | current | Severity code used in determining the SysLog Priority value. |